477 lines
16 KiB
Plaintext
477 lines
16 KiB
Plaintext
|
-- *****************************************************************
|
||
|
|
-- Juniper Enterprise Specific MIB: JUNIPER-POWER-MANAGEMENT
|
||
|
|
--
|
||
|
|
-- Copyright (c) 2009-2010, Juniper Networks, Inc.
|
||
|
|
-- All rights reserved.
|
||
|
|
--
|
||
|
|
-- The contents of this document are subject to change without notice.
|
||
|
|
-- *****************************************************************
|
||
|
|
|
||
|
|
JUNIPER-POWER-SUPPLY-UNIT-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
TEXTUAL-CONVENTION, DisplayString, TruthValue
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
jnxContentsContainerIndex, jnxContentsL1Index,
|
||
|
|
jnxContentsL2Index, jnxContentsL3Index
|
||
|
|
FROM JUNIPER-MIB
|
||
|
|
jnxPsuMIBRoot
|
||
|
|
FROM JUNIPER-SMI;
|
||
|
|
|
||
|
|
jnxPsuMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201010270000Z" -- Oct 27 00:00:00 2010 UTC
|
||
|
|
ORGANIZATION "Juniper Networks, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Juniper Technical Assistance Center
|
||
|
|
Juniper Networks, Inc.
|
||
|
|
1133 Innovation Way
|
||
|
|
Sunnyvale, CA 94089
|
||
|
|
E-mail: support@juniper.net"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"The Juniper Supply Unit MIB definitions for enabling
|
||
|
|
power monitoring and management of a juniper device."
|
||
|
|
|
||
|
|
-- revision history
|
||
|
|
REVISION "201001270000Z" -- January 27 00:00:00 2010 UTC
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial revision."
|
||
|
|
REVISION "201005130000Z" -- May 13 00:00:00 2010 UTC
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new OIDs for power budget statistics which gives details of
|
||
|
|
Power reserved for Chassis and the Total power allocated to Chassis
|
||
|
|
including for each FPC.
|
||
|
|
Added new Table jnxPsuFpcPowerTable which gives the Priority
|
||
|
|
assigned and Power allocated to each FPC."
|
||
|
|
REVISION "201010270000Z" -- Oct 27 00:00:00 2010 UTC
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new OIDs for power budget statistics which gives details of
|
||
|
|
Power reserved for System dynamically."
|
||
|
|
|
||
|
|
::= { jnxPsuMIBRoot 1 }
|
||
|
|
|
||
|
|
jnxPsuNotifications OBJECT IDENTIFIER ::= { jnxPsuMIB 1 }
|
||
|
|
jnxPsuObjects OBJECT IDENTIFIER ::= { jnxPsuMIB 2 }
|
||
|
|
|
||
|
|
--**********************************************************************
|
||
|
|
-- PSU Scalar Objects
|
||
|
|
--**********************************************************************
|
||
|
|
|
||
|
|
jnxPsuScalars OBJECT IDENTIFIER ::= { jnxPsuObjects 1 }
|
||
|
|
|
||
|
|
jnxPsuAvailableDeviceCount OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Gives the number of PSU units available online in the System."
|
||
|
|
::= { jnxPsuScalars 1 }
|
||
|
|
|
||
|
|
jnxPsuAvailableAveragePowerSupply OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Gives the total average power that the System can supply from the
|
||
|
|
available online units in Watts."
|
||
|
|
::= { jnxPsuScalars 2 }
|
||
|
|
|
||
|
|
jnxPsuAvailableMaxPowerSupply OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Gives the total maximum power that the System can supply from the
|
||
|
|
available online units in Watts."
|
||
|
|
::= { jnxPsuScalars 3 }
|
||
|
|
|
||
|
|
jnxPsuRedundancy OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
nPlusNRedundancy(1),
|
||
|
|
nPlusOneRedundancy(2),
|
||
|
|
none(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"PSU power redundancy configuration."
|
||
|
|
::= { jnxPsuScalars 4 }
|
||
|
|
|
||
|
|
jnxPsuChassisPowerReserved OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Power reserved for Chassis in Watts."
|
||
|
|
::= { jnxPsuScalars 5 }
|
||
|
|
|
||
|
|
jnxPsuChassisPowerAllocated OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Total power allocated for chassis and all the FPCs in Watts."
|
||
|
|
::= { jnxPsuScalars 6 }
|
||
|
|
|
||
|
|
jnxPsuRedundantPowerAvailable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Power(in Watts) that is still available for allocation
|
||
|
|
even while supporting redundancy with the present usage."
|
||
|
|
::= { jnxPsuScalars 7 }
|
||
|
|
|
||
|
|
jnxPsuTotalPowerAvailable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Power(in Watts) which could be made available for further
|
||
|
|
allocation without supporting any redundancy with the present usage."
|
||
|
|
::= { jnxPsuScalars 8 }
|
||
|
|
|
||
|
|
jnxPsuChassisPowerConsumed OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Total power consumed by the entire system rounded to the nearest integer.
|
||
|
|
This is calculated using the PowerFactor, Current and Voltage values
|
||
|
|
of each PSU that is online and connected to the System."
|
||
|
|
::= { jnxPsuScalars 9 }
|
||
|
|
|
||
|
|
jnxPsuTemperatureInflow OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Average inflow temperature calculated from all
|
||
|
|
the available input sensors on the master RE."
|
||
|
|
|
||
|
|
::= { jnxPsuScalars 10 }
|
||
|
|
|
||
|
|
jnxPsuTemperatureOutflow OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Average outflow temperature calculated from all
|
||
|
|
the available output sensors on the master RE."
|
||
|
|
::= { jnxPsuScalars 11 }
|
||
|
|
|
||
|
|
jnxPsuTemperatureInflowSamples OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of samples being taken while calculating
|
||
|
|
jnxPsuTemperatureInflow."
|
||
|
|
|
||
|
|
::= { jnxPsuScalars 12 }
|
||
|
|
|
||
|
|
jnxPsuTemperatureOutflowSamples OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of samples being taken while calculating
|
||
|
|
jnxPsuTemperatureOutflow."
|
||
|
|
|
||
|
|
::= { jnxPsuScalars 13 }
|
||
|
|
|
||
|
|
--**********************************************************************
|
||
|
|
-- Device POWER
|
||
|
|
--**********************************************************************
|
||
|
|
|
||
|
|
jnxPsuTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxPsuEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A list of power entries for each PSU component."
|
||
|
|
::= { jnxPsuObjects 2 }
|
||
|
|
|
||
|
|
jnxPsuEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxPsuEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Defines an entry in jnxPsuTable. "
|
||
|
|
INDEX { jnxContentsContainerIndex,
|
||
|
|
jnxContentsL1Index,
|
||
|
|
jnxContentsL2Index,
|
||
|
|
jnxContentsL3Index }
|
||
|
|
|
||
|
|
::= { jnxPsuTable 1 }
|
||
|
|
|
||
|
|
JnxPsuEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
jnxPsuAvgPower INTEGER,
|
||
|
|
jnxPsuMaxPower INTEGER,
|
||
|
|
jnxPsuMode INTEGER,
|
||
|
|
jnxPsuOutletCount INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxPsuAvgPower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer that contains the average power used, in Watts
|
||
|
|
for each component."
|
||
|
|
::= { jnxPsuEntry 1 }
|
||
|
|
|
||
|
|
jnxPsuMaxPower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer that contains the max power available, in Watts
|
||
|
|
for each component."
|
||
|
|
::= { jnxPsuEntry 2 }
|
||
|
|
|
||
|
|
jnxPsuMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
single(1),
|
||
|
|
three(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Mode for each PSU component."
|
||
|
|
::= { jnxPsuEntry 3 }
|
||
|
|
|
||
|
|
jnxPsuOutletCount OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The number of outlets (regardless of their current state)
|
||
|
|
present on this psu component, default is 0."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { jnxPsuEntry 4 }
|
||
|
|
|
||
|
|
--**********************************************************************
|
||
|
|
-- Environment
|
||
|
|
--**********************************************************************
|
||
|
|
|
||
|
|
jnxPsuEnvironmentTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxPsuEnvironmentEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A list of PSU Environment entries."
|
||
|
|
::= { jnxPsuObjects 3 }
|
||
|
|
|
||
|
|
jnxPsuEnvironmentEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxPsuEnvironmentEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Defines an entry in jnxPsuEnvironmentTable."
|
||
|
|
INDEX { jnxContentsContainerIndex,
|
||
|
|
jnxContentsL1Index,
|
||
|
|
jnxContentsL2Index,
|
||
|
|
jnxContentsL3Index }
|
||
|
|
::= { jnxPsuEnvironmentTable 1 }
|
||
|
|
|
||
|
|
JnxPsuEnvironmentEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
jnxPsuThermalValue INTEGER,
|
||
|
|
jnxPsuHumidityValue INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxPsuThermalValue OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Temparature at each component in degrees Celsius rounded to
|
||
|
|
the nearest integer."
|
||
|
|
::= { jnxPsuEnvironmentEntry 1 }
|
||
|
|
|
||
|
|
jnxPsuHumidityValue OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Humidity at each component in percentage."
|
||
|
|
::= { jnxPsuEnvironmentEntry 2 }
|
||
|
|
|
||
|
|
--**********************************************************************
|
||
|
|
-- OUTLETS
|
||
|
|
--**********************************************************************
|
||
|
|
|
||
|
|
jnxPsuOutletTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxPsuOutletEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Gives details of each Power outlet`s state,
|
||
|
|
capacity to supply power, and other details."
|
||
|
|
::= { jnxPsuObjects 4 }
|
||
|
|
|
||
|
|
jnxPsuOutletEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxPsuOutletEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A value contained within the OutletEntry"
|
||
|
|
INDEX { jnxContentsContainerIndex,
|
||
|
|
jnxContentsL1Index,
|
||
|
|
jnxContentsL2Index,
|
||
|
|
jnxContentsL3Index }
|
||
|
|
::= { jnxPsuOutletTable 1 }
|
||
|
|
|
||
|
|
JnxPsuOutletEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
jnxPsuOutletName DisplayString,
|
||
|
|
jnxPsuOutletDescription DisplayString,
|
||
|
|
jnxPsuOutletAvgPower INTEGER,
|
||
|
|
jnxPsuOutletMaxPower INTEGER,
|
||
|
|
jnxPsuOutletCurrent INTEGER,
|
||
|
|
jnxPsuOutletStatus INTEGER,
|
||
|
|
jnxPsuOutletVoltage INTEGER,
|
||
|
|
jnxPsuOutletPowerFactorValue INTEGER,
|
||
|
|
jnxPsuOutletPowerConsumed INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxPsuOutletName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString(SIZE (0..15))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Outlet name associated to the power supply unit for
|
||
|
|
each PSU Component."
|
||
|
|
::= { jnxPsuOutletEntry 1 }
|
||
|
|
|
||
|
|
jnxPsuOutletDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString(SIZE (0..63))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Outlet description associated to the power supply unit for
|
||
|
|
each PSU Component."
|
||
|
|
::= { jnxPsuOutletEntry 2 }
|
||
|
|
|
||
|
|
jnxPsuOutletAvgPower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer that contains the average power used, in Watts for each component."
|
||
|
|
::= { jnxPsuOutletEntry 3 }
|
||
|
|
|
||
|
|
jnxPsuOutletMaxPower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer that contains the maximum power available, in Watts for each component."
|
||
|
|
::= { jnxPsuOutletEntry 4 }
|
||
|
|
|
||
|
|
jnxPsuOutletCurrent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "PSU output current in milliamps rounded to the nearest
|
||
|
|
integer."
|
||
|
|
::= { jnxPsuOutletEntry 5 }
|
||
|
|
|
||
|
|
jnxPsuOutletStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
off(0),
|
||
|
|
on(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The value of the operational status for the given outlet.
|
||
|
|
This can also be used to set the outlet state"
|
||
|
|
::= { jnxPsuOutletEntry 8 }
|
||
|
|
|
||
|
|
jnxPsuOutletVoltage OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Output voltage in Volts rounded to the nearest integer."
|
||
|
|
::= { jnxPsuOutletEntry 9 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- NOTE: jnxPsuOutletPowerFactorValue does NOT return the traditional
|
||
|
|
-- "power factor", defined as real power in watts divided by apparent
|
||
|
|
-- power in volt-amperes. Instead it returns "efficiency" which is
|
||
|
|
-- defined as power output divided by power input.
|
||
|
|
--
|
||
|
|
jnxPsuOutletPowerFactorValue OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Power factor percentage of each PSU (2k/3k).
|
||
|
|
|
||
|
|
Algorithm for calculation of Power Factor is below.
|
||
|
|
For PowerOut values that fall in between 618.93W and 915.24W,
|
||
|
|
say 700W, the appropriate PF ranges from 0.910191 &
|
||
|
|
0.917994. Following linear equation could help deduce a
|
||
|
|
fairly accurate input power value.
|
||
|
|
|
||
|
|
Linear equation y = mx + b (where m is the slope and b is
|
||
|
|
the Y intercept)
|
||
|
|
|
||
|
|
Slope m = (y2 - y1) / (x2 - x1)
|
||
|
|
Y intercept b = y - mx
|
||
|
|
|
||
|
|
Plugging it all together for our example:
|
||
|
|
|
||
|
|
m = (915.24 - 618.93) / (0.917994 - 0.910191) = 37973.86
|
||
|
|
b = 915.24 - (37973.86 * 0.917994) = -33944.5
|
||
|
|
|
||
|
|
for 700W (y), our efficiency (x) would then be:
|
||
|
|
|
||
|
|
x = (700 - (-33944.5)) / 37973.86 = 0.912326 = 91%
|
||
|
|
|
||
|
|
PowerIn = 700W /0.912326 = 767.26W "
|
||
|
|
|
||
|
|
::= { jnxPsuOutletEntry 10 }
|
||
|
|
|
||
|
|
jnxPsuOutletPowerConsumed OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Power Consumed by each outlet units in Watts."
|
||
|
|
::= { jnxPsuOutletEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
--**********************************************************************
|
||
|
|
-- FPC Power allocated information
|
||
|
|
--**********************************************************************
|
||
|
|
|
||
|
|
jnxPsuFpcPowerTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF JnxPsuFpcPowerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A list of entries for each FPC(Flexible PIC Concentrator)
|
||
|
|
giving it's assigned priority and power being allocated.
|
||
|
|
More information on FPCs can be found in JUNIPER-MIB."
|
||
|
|
::= { jnxPsuObjects 5 }
|
||
|
|
|
||
|
|
jnxPsuFpcPowerEntry OBJECT-TYPE
|
||
|
|
SYNTAX JnxPsuFpcPowerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A value contained within the FpcPowerEntry"
|
||
|
|
INDEX { jnxContentsContainerIndex,
|
||
|
|
jnxContentsL1Index,
|
||
|
|
jnxContentsL2Index,
|
||
|
|
jnxContentsL3Index }
|
||
|
|
::= { jnxPsuFpcPowerTable 1 }
|
||
|
|
|
||
|
|
JnxPsuFpcPowerEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
jnxPsuFpcPowerPriority INTEGER,
|
||
|
|
jnxPsuFpcPowerAllocated INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
jnxPsuFpcPowerPriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Power budget priority assigned to the FPC.
|
||
|
|
Lower number means higher priority."
|
||
|
|
::= { jnxPsuFpcPowerEntry 1 }
|
||
|
|
|
||
|
|
jnxPsuFpcPowerAllocated OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Power allocated to the FPC in Watts."
|
||
|
|
::= { jnxPsuFpcPowerEntry 2 }
|
||
|
|
|
||
|
|
END
|