david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/junose/Juniper-PIM-MIB

1746 lines
63 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- Juniper-PIM-MIB
--
-- Juniper Networks Enterprise MIB
-- Protocol Independent Multicast (PIM) MIB
--
-- Copyright (c) 2001 Unisphere Networks, Inc.
-- Copyright (c) 2002 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************
Juniper-PIM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, TimeTicks
FROM SNMPv2-SMI
RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
pimInterfaceIfIndex, pimRPSetComponent, pimRPSetGroupAddress,
pimRPSetGroupMask, pimRPSetAddress
FROM PIM-MIB
InterfaceIndex
FROM IF-MIB
juniMibs
FROM Juniper-MIBs;
juniPimMIB MODULE-IDENTITY
LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"
DESCRIPTION
"The enterprise MIB module for management of PIM routers."
-- Revision History
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
DESCRIPTION
"Replaced Unisphere names with Juniper names."
REVISION "200103191537Z" -- 19-Mar-01 10:37 AM EST - JUNOSe 3.0
DESCRIPTION
"Initial enterprise version."
::= { juniMibs 43 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
JuniPimType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used do identify Sparse mode and Dense mode PIM
protocol."
SYNTAX INTEGER {
invalid(0), -- not valid value
dense(1), -- dense mode PIM
sparse(2), -- sparse mode PIM
sparseAndDense(3) } -- both sparse and dense mode PIM
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimMIBObjects OBJECT IDENTIFIER ::= { juniPimMIB 1 }
juniPimTraps OBJECT IDENTIFIER ::= { juniPimMIBObjects 0 }
juniPimGlobal OBJECT IDENTIFIER ::= { juniPimMIBObjects 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Pim General Group
--
-- NOTE: RowStatus rowStatus. This needs to go into virtual-router
-- MIB table so that we can create/destroy PIM
--
-- PimPktStats: these actually augment the general group of standard MIB
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimNumHelloRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Hellos received by PIM on this router."
::= { juniPimGlobal 1 }
juniPimNumJoinPruneRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of JoinPrunes received by PIM on this router."
::= { juniPimGlobal 2 }
juniPimNumAssertRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Asserts received by PIM on this router."
::= { juniPimGlobal 3 }
juniPimNumGraftRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Grafts received by PIM on this router."
::= { juniPimGlobal 4 }
juniPimNumGraftAckRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Graft Acks received by PIM on this router."
::= { juniPimGlobal 5 }
juniPimNumHelloSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Hellos sent by PIM on this router."
::= { juniPimGlobal 6 }
juniPimNumJoinPruneSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of JoinPrunes sent by PIM on this router."
::= { juniPimGlobal 7 }
juniPimNumAssertSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Asserts sent by PIM on this router."
::= { juniPimGlobal 8 }
juniPimNumGraftSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Grafts sent by PIM on this router."
::= { juniPimGlobal 9 }
juniPimNumGraftAckSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Graft Acks sent by PIM on this router."
::= { juniPimGlobal 10 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Pim Interface Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing enterprise specific information on a
subset of the rows of the pimInterfaceTable defined in the standard PIM
MIB."
::= { juniPimGlobal 11 }
juniPimInterfaceEntry OBJECT-TYPE
SYNTAX JuniPimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimInterfaceTable. There is one
entry per entry in the pimInterfaceTable."
INDEX { pimInterfaceIfIndex }
::= { juniPimInterfaceTable 1 }
JuniPimInterfaceEntry ::= SEQUENCE {
juniPimIntfNumHelloRcvd Integer32,
juniPimIntfNumJoinPruneRcvd Integer32,
juniPimIntfNumAssertRcvd Integer32,
juniPimIntfNumGraftRcvd Integer32,
juniPimIntfNumGraftAckRcvd Integer32,
juniPimIntfNumHelloSent Integer32,
juniPimIntfNumJoinPruneSent Integer32,
juniPimIntfNumAssertSent Integer32,
juniPimIntfNumGraftSent Integer32,
juniPimIntfNumGraftAckSent Integer32,
juniPimIntfVersion INTEGER,
juniPimIntfNumNbrs Integer32 }
juniPimIntfNumHelloRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Hellos received by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0."
::= { juniPimInterfaceEntry 1 }
juniPimIntfNumJoinPruneRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of JoinPrunes received by PIM on this interface. It can
only be cleared to 0 when doing set. Setting this also sets counters
for other types of packets to 0."
::= { juniPimInterfaceEntry 2 }
juniPimIntfNumAssertRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Asserts received by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0."
::= { juniPimInterfaceEntry 3 }
juniPimIntfNumGraftRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Grafts received by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0."
::= { juniPimInterfaceEntry 4 }
juniPimIntfNumGraftAckRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Graft Acks received by PIM on this interface. It can
only be cleared to 0 when doing set. Setting this also sets counters
for other types of packets to 0."
::= { juniPimInterfaceEntry 5 }
juniPimIntfNumHelloSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Hellos sent by PIM on this interface. It can only be
cleared to 0 when doing set. Setting this also sets counters for other
types of packets to 0."
::= { juniPimInterfaceEntry 6 }
juniPimIntfNumJoinPruneSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of JoinPrunes sent by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0."
::= { juniPimInterfaceEntry 7 }
juniPimIntfNumAssertSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Asserts sent by PIM on this interface. It can only be
cleared to 0 when doing set. Setting this also sets counters for other
types of packets to 0."
::= { juniPimInterfaceEntry 8 }
juniPimIntfNumGraftSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Grafts sent by PIM on this interface. It can only be
cleared to 0 when doing set. Setting this also sets counters for other
types of packets to 0."
::= { juniPimInterfaceEntry 9 }
juniPimIntfNumGraftAckSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of Graft Acks sent by PIM on this interface. It can only
be cleared to 0 when doing set. Setting this also sets counters for
other types of packets to 0."
::= { juniPimInterfaceEntry 10 }
juniPimIntfVersion OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of PIM running on this interface."
::= { juniPimInterfaceEntry 11 }
juniPimIntfNumNbrs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PIM neighbors detected on this interface."
::= { juniPimInterfaceEntry 12 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM Multicast Route Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM multicast routing information
describing its <*, *, RP>/ <*, G>/ <S, G> states."
::= { juniPimGlobal 12 }
juniPimMRouteEntry OBJECT-TYPE
SYNTAX JuniPimMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimMRouteTable."
INDEX { juniPimMRouteGroup,
juniPimMRouteSource,
juniPimMRouteSourceMask,
juniPimMRouteRPAddress }
::= { juniPimMRouteTable 1 }
JuniPimMRouteEntry ::= SEQUENCE {
juniPimMRouteGroup IpAddress,
juniPimMRouteSource IpAddress,
juniPimMRouteSourceMask IpAddress,
juniPimMRouteRPAddress IpAddress,
juniPimMRouteUpstreamAssertTimer TimeTicks,
juniPimMRouteAssertMetric Integer32,
juniPimMRouteAssertPref Integer32,
juniPimMRouteAssertRPTBit TruthValue,
juniPimMRouteBits BITS,
juniPimMRouteRPAddrInUse IpAddress,
juniPimMRouteUpstreamNbr IpAddress,
juniPimMRouteIifAddr IpAddress,
juniPimMRouteIsWaitingToSwitchToSPT TruthValue,
juniPimMRouteEntryExpiryTimer TimeTicks,
juniPimMRouteSenderDRAddr IpAddress,
juniPimMRouteRouteAddr IpAddress,
juniPimMRouteRouteMask IpAddress,
juniPimMRouteGRPAddr IpAddress,
juniPimMRouteGRPMask IpAddress,
juniPimMRouteOtherProtoOifJoinTypeAll TruthValue,
juniPimMRouteOtherProtoOifJoinTypeG TruthValue,
juniPimMRouteOtherProtoOifJoinTypeSG TruthValue,
juniPimMRoutePimType JuniPimType }
juniPimMRouteGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address. Specified as 224.0.0.0 for <*, *, RP> entries."
::= { juniPimMRouteEntry 1 }
juniPimMRouteSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
entries."
::= { juniPimMRouteEntry 2 }
juniPimMRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address mask. Specified as 255.255.255.255 for <S, G>
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries."
::= { juniPimMRouteEntry 3 }
juniPimMRouteRPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G>
and <*, G> entries."
::= { juniPimMRouteEntry 4 }
juniPimMRouteUpstreamAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the router changes its upstream neighbor back
to its RPF neighbor. This timer is called the Assert timer in the PIM
Sparse and Dense mode specification. A value of 0 indicates that no
Assert has changed the upstream neighbor away from the RPF neighbor."
::= { juniPimMRouteEntry 5 }
juniPimMRouteAssertMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric advertised by the assert winner on the upstream interface,
or 0 if no such assert is in received."
::= { juniPimMRouteEntry 6 }
juniPimMRouteAssertPref OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference advertised by the assert winner on the upstream
interface, or 0 if no such assert is in effect."
::= { juniPimMRouteEntry 7 }
juniPimMRouteAssertRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RPT-bit advertised by the assert winner on the
upstream interface, or false if no such assert is in effect."
::= { juniPimMRouteEntry 8 }
juniPimMRouteBits OBJECT-TYPE
SYNTAX BITS {
rpt(0),
spt(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes whether the entry is on shared tree (RPT) or
shortest path tree (SPT)."
::= { juniPimMRouteEntry 9 }
juniPimMRouteRPAddrInUse OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries.
Set to 0.0.0.0 for <S, G> entries on shortest path tree."
::= { juniPimMRouteEntry 10 }
juniPimMRouteUpstreamNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of upstream neighbor being used for the entry. Its set to
0.0.0.0 if the router is directly attached to source on one of its
interface. "
::= { juniPimMRouteEntry 11 }
juniPimMRouteIifAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of incoming interface for this entry."
::= { juniPimMRouteEntry 12 }
juniPimMRouteIsWaitingToSwitchToSPT OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes whether the entry is still waiting to switch
completely to shortest path tree in case of <S, G> entries. It waits to
do this till it receives first packet from incoming interface towards
shortest path tree."
::= { juniPimMRouteEntry 13 }
juniPimMRouteEntryExpiryTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time after which the entry timer expires for this entry. Set to 0
if entry timer is not active."
::= { juniPimMRouteEntry 14 }
juniPimMRouteSenderDRAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the designated router on the sender's subnet in case of
<S, G> entries. The sender designated router register encapsulates data
to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries."
::= { juniPimMRouteEntry 15 }
juniPimMRouteRouteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the route being used to do RPF check for this entry. It
is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255)
if there is no route available."
::= { juniPimMRouteEntry 16 }
juniPimMRouteRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask of the route being used to do RPF check for this entry. It is
set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there
is no route available."
::= { juniPimMRouteEntry 17 }
juniPimMRouteGRPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the group-to-RP mapping being used to get the RP for
this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
*, RP>."
::= { juniPimMRouteEntry 18 }
juniPimMRouteGRPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask of the group-to-RP mapping being used to get the RP for this
entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to
0.0.0.0) if there is no group-to-RP mapping available or if entry is <*,
*, RP>."
::= { juniPimMRouteEntry 19 }
juniPimMRouteOtherProtoOifJoinTypeAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if some other multicast protocol is also
interested in receiving data for this entry as a result of its interest
in receiving all data. This will be particularly true for dense mode
protocols which would want all data (<*, *>) from PIM sparse mode
protocol."
::= { juniPimMRouteEntry 20 }
juniPimMRouteOtherProtoOifJoinTypeG OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if some other multicast protocol is also
interested in receiving data for this entry as a result of its interest
in receiving data for a given group. This will be particularly true for
IGMP which would want data for a given group (<*, G>) from PIM
protocol."
::= { juniPimMRouteEntry 21 }
juniPimMRouteOtherProtoOifJoinTypeSG OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if some other multicast protocol is also
interested in receiving data for this entry as a result of its interest
in receiving data for a given <source, group>. This will be
particularly true for IGMPv3 which would want data for a given <source,
group (<S, G>) from PIM sparse-mode protocol."
::= { juniPimMRouteEntry 22 }
juniPimMRoutePimType OBJECT-TYPE
SYNTAX JuniPimType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the owner of this entry is Sparse mode or
Dense mode PIM. Owner is usually determined by the protocol running on
the incoming interface of the entry. In case sparse-dense mode PIM is
running on the incoming interface, sparse-mode is the owner if RP for
the group is known, else dense mode is the owner."
::= { juniPimMRouteEntry 23 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM Next Hop Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM multicast routing information
describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces."
::= { juniPimGlobal 13 }
juniPimMRouteNextHopEntry OBJECT-TYPE
SYNTAX JuniPimMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimMRouteNextHopTable."
INDEX { juniPimMRouteNextHopGroupAddr,
juniPimMRouteNextHopSrcAddr,
juniPimMRouteNextHopSrcMask,
juniPimMRouteNextHopRPAddr,
juniPimMRouteNextHopIfId,
juniPimMRouteNextHopAddress }
::= { juniPimMRouteNextHopTable 1 }
JuniPimMRouteNextHopEntry ::= SEQUENCE {
juniPimMRouteNextHopGroupAddr IpAddress,
juniPimMRouteNextHopSrcAddr IpAddress,
juniPimMRouteNextHopSrcMask IpAddress,
juniPimMRouteNextHopRPAddr IpAddress,
juniPimMRouteNextHopIfId InterfaceIndex,
juniPimMRouteNextHopAddress IpAddress,
juniPimMRouteNextHopPruneReason INTEGER,
juniPimMRouteNextHopJoinTypeSSRP TruthValue,
juniPimMRouteNextHopJoinTypeG TruthValue,
juniPimMRouteNextHopJoinTypeSG TruthValue,
juniPimMRouteNextHopHasLGM TruthValue,
juniPimMRouteNextHopHasOifAW TruthValue,
juniPimMRouteNextHopHasOifSendAssert TruthValue,
juniPimMRouteNextHopHasOifRegister TruthValue,
juniPimMRouteNextHopHasOifBorderBit TruthValue,
juniPimMRouteNextHopHasOifNullEncapsBit TruthValue,
juniPimMRouteNextHopJoinEndTimer TimeTicks,
juniPimMRouteNextHopAssertEndTimer TimeTicks,
juniPimMRouteNextHopNextAssertTimer TimeTicks,
juniPimMRouteNextHopAssertSrcAddress IpAddress,
juniPimMRouteNextHopRegisterSuppressionTimer TimeTicks,
juniPimMRouteNextHopPimType JuniPimType,
juniPimMRouteNextHopPruneTimeLeft TimeTicks,
juniPimMRouteNextHopsendingIpAddress IpAddress }
juniPimMRouteNextHopGroupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address. Specified as 224.0.0.0 for <*, *, RP> entries."
::= { juniPimMRouteNextHopEntry 2 }
juniPimMRouteNextHopSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G>
entries."
::= { juniPimMRouteNextHopEntry 3 }
juniPimMRouteNextHopSrcMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address mask. Specified as 255.255.255.255 for <S, G>
entries and 0.0.0.0 for <*, *, RP> and <*, G> entries."
::= { juniPimMRouteNextHopEntry 4 }
juniPimMRouteNextHopRPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and
<*, G> entries."
::= { juniPimMRouteNextHopEntry 5 }
juniPimMRouteNextHopIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of the outgoing interface (next hop). Specified as
0 for register outgoing interface. Register outgoing interfaces are
created by DR on the source subnet to send PIM register encapsulated
data (as unicast) to RP. It is also used by PIM boundary routers
(PMBRs) to register data to RP."
::= { juniPimMRouteNextHopEntry 6 }
juniPimMRouteNextHopAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object takes following different values based on the type of next
hop. It should be set to the address of RP in case the next hop
interface is register interface i.e. juniPimMRouteNextHopIfId object is
set to 0. It should be set to the address of neighbor in case the
interface is an NBMA interface. In all other cases it should be set to
the group address itself."
::= { juniPimMRouteNextHopEntry 7 }
juniPimMRouteNextHopPruneReason OBJECT-TYPE
SYNTAX INTEGER {
other(1),
prune(2),
assert(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates why the downstream interface was pruned, whether
in response to a PIM prune message or due to PIM Assert processing."
::= { juniPimMRouteNextHopEntry 8 }
juniPimMRouteNextHopJoinTypeSSRP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not the interface was added as a
result of receiving <*, *, RP> join in case of <*, *, RP> entry OR
inherited as outgoing interface from corresponding <*, *, RP> entry in
case of <*, G> entry."
::= { juniPimMRouteNextHopEntry 9 }
juniPimMRouteNextHopJoinTypeG OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not the interface was added as a
result of receiving <*, G> join in case of <*, G> entry OR inherited as
outgoing interface from corresponding <*, G> entry in case of <S, G>
entry."
::= { juniPimMRouteNextHopEntry 10 }
juniPimMRouteNextHopJoinTypeSG OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not the interface was added as a
result of receiving <S, G> join in case of <S, G> entry."
::= { juniPimMRouteNextHopEntry 11 }
juniPimMRouteNextHopHasLGM OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not the interface has local group
membership (as indicated by IGMP) in case of <*, G> and <S, G> entries."
::= { juniPimMRouteNextHopEntry 12 }
juniPimMRouteNextHopHasOifAW OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not this interface is the winner of
assert for corresponding <*, G>/<S, G> entry."
::= { juniPimMRouteNextHopEntry 13 }
juniPimMRouteNextHopHasOifSendAssert OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not this interface is going to send an
assert at the end of assert suppression interval. Assert suppression is
used to prevent a flood of assert to be generated in response to data or
other asserts."
::= { juniPimMRouteNextHopEntry 14 }
juniPimMRouteNextHopHasOifRegister OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether or not this next hop is a register
outgoing interface."
::= { juniPimMRouteNextHopEntry 15 }
juniPimMRouteNextHopHasOifBorderBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to describe a register outgoing interface. It
indicates whether or not the border bit is set in the register packet
when the packet is sent over the register interface. For all other
(non-register) interfaces its set to false."
::= { juniPimMRouteNextHopEntry 16 }
juniPimMRouteNextHopHasOifNullEncapsBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to describe a register outgoing interface. It
indicates whether or not the NULL encapsulation bit is set
(periodically) in the register packet when the packet is sent over the
register interface. For all other (non-register) interfaces its set to
false."
::= { juniPimMRouteNextHopEntry 17 }
juniPimMRouteNextHopJoinEndTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time (in seconds) left when the join timer
expires for the outgoing interface. Join timer for an outgoing
interface of <S, G> entry indicates when the <S, G> join expires, for a
<*, G> entry indicates when the <*, G> join expires and for a <*, *, RP>
entry indicates when the <*, *, RP> join expires. Inherited joins (like
<S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>)
expire when the corresponding parent join expires."
::= { juniPimMRouteNextHopEntry 18 }
juniPimMRouteNextHopAssertEndTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time (in seconds) left when the assert timer
expires on this outgoing inteface."
::= { juniPimMRouteNextHopEntry 19 }
juniPimMRouteNextHopNextAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the duration (in seconds) left for which sending
an assert has been suppressed on this outgoing interface."
::= { juniPimMRouteNextHopEntry 20 }
juniPimMRouteNextHopAssertSrcAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source address which will be used in the
assert packet to send an assert out for the entry on this outgoing
interface. For <S, G> entries it is the address of the source S itself.
For <*, G> entries it is the address of the source whose data was
forwarded using this <*, G> and caused the assert situation to happen."
::= { juniPimMRouteNextHopEntry 21 }
juniPimMRouteNextHopRegisterSuppressionTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used for register outgoing interfaces. It indicates the
duration (in seconds) left for which sending a register packet has been
suppressed on the register outgoing interface as a result of receiving
register-stop from the RP."
::= { juniPimMRouteNextHopEntry 22 }
juniPimMRouteNextHopPimType OBJECT-TYPE
SYNTAX JuniPimType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the outgoing interface was contributed by
sparse-mode or dense-mode PIM."
::= { juniPimMRouteNextHopEntry 23 }
juniPimMRouteNextHopPruneTimeLeft OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time (in seconds) left when the prune timer
expires on an outgoing inteface. Its used for pruned outgoing
interfaces contributed by dense-mode PIM."
::= { juniPimMRouteNextHopEntry 24 }
juniPimMRouteNextHopsendingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the source IP address used by this interface to
send PIM packets out on this outgoing interface."
::= { juniPimMRouteNextHopEntry 25 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM RP-Set Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing enterprise specific information on a
subset of the rows of the pimRPSetTable defined in the standard PIM
MIB."
::= { juniPimGlobal 14 }
juniPimRPSetEntry OBJECT-TYPE
SYNTAX JuniPimRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimRPSetTable."
INDEX { pimRPSetComponent,
pimRPSetGroupAddress,
pimRPSetGroupMask,
pimRPSetAddress }
::= { juniPimRPSetTable 1 }
JuniPimRPSetEntry ::= SEQUENCE {
juniPimRPSetPriority Integer32,
juniPimRPSetTypeInfo INTEGER,
juniPimRPSetAccessListName OCTET STRING }
juniPimRPSetPriority OBJECT-TYPE
SYNTAX Integer32 (1..'FFFF'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the priority of the RP for this group-to-RP
mapping."
::= { juniPimRPSetEntry 1 }
juniPimRPSetTypeInfo OBJECT-TYPE
SYNTAX INTEGER {
pimRPTypeInvalid(0),
pimRPTypeStatic(1),
pimRPTypeStaticOverride(2),
pimRPTypeAutoRP(3),
pimRPTypeBSR(4),
pimRPTypeStaticNegative(5),
pimRPTypeStaticOverrideNegative(6),
pimRPTypeAutoRPNegative(7),
pimRPTypeBSRNegative(8) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the mechanism by which this group to RP mapping
has been learnt, i.e. whether its statically configured, AutoRP learnt
or BSR learnt. It also indicates whether the mapping is positive or
negative. Negative mappings force the groups in that range to fall into
dense-mode category if sparse-dense mode is configured or no RP if its
purely sparse mode configuration."
::= { juniPimRPSetEntry 2 }
juniPimRPSetAccessListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object lists the name of the access list from which this
group-to-RP mapping was picked up in case of statically configured
RPs."
::= { juniPimRPSetEntry 3 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM Static RP configuration table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimStaticRPConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimStaticRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing statically configured PIM RPs."
::= { juniPimGlobal 15 }
juniPimStaticRPConfEntry OBJECT-TYPE
SYNTAX JuniPimStaticRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimStaticRPConfTable."
INDEX { juniPimStaticRPConfComponentIndex,
juniPimStaticRPConfRPAddr,
juniPimStaticRPConfAccessListName }
::= { juniPimStaticRPConfTable 1 }
JuniPimStaticRPConfEntry ::= SEQUENCE {
juniPimStaticRPConfComponentIndex Integer32,
juniPimStaticRPConfRPAddr IpAddress,
juniPimStaticRPConfAccessListName OCTET STRING,
juniPimStaticRPConfRowStatus RowStatus,
juniPimStaticRPConfOverride TruthValue }
juniPimStaticRPConfComponentIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value."
::= { juniPimStaticRPConfEntry 1 }
juniPimStaticRPConfRPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ip address of the RP which for the group-to-RP mapping being
configured."
::= { juniPimStaticRPConfEntry 2 }
juniPimStaticRPConfAccessListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the access list from which group-ranges are picked up for this
group-ro-RP mapping. Every deny component in the list is added as
negative group-ro-RP mapping."
::= { juniPimStaticRPConfEntry 3 }
juniPimStaticRPConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be created, or old
entries deleted from this table."
::= { juniPimStaticRPConfEntry 4 }
juniPimStaticRPConfOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates whether or not this statically configured
group-to-RP mapping should override the group-to-RP mapping learnt via
AutoRP for the component group-ranges in the access list. By default
AutoRP learnt group-to-RP mappings are preferred over statically
configured ones. While setting the rowStatus to create a static RP,
this field should be assigned to true if the override property is
desired."
DEFVAL { false }
::= { juniPimStaticRPConfEntry 5 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM AutoRP Candidate RP configuration table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimAutoRPConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimAutoRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table allowing AutoRP configuration of candidate RPs
(advertisement agents)."
::= { juniPimGlobal 16 }
juniPimAutoRPConfEntry OBJECT-TYPE
SYNTAX JuniPimAutoRPConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimAutoRPConfTable."
INDEX { juniPimAutoRPConfComponentIndex,
juniPimAutoRPConfCandRPAddr,
juniPimAutoRPConfGroupAccessListName }
::= { juniPimAutoRPConfTable 1 }
JuniPimAutoRPConfEntry ::= SEQUENCE {
juniPimAutoRPConfComponentIndex Integer32,
juniPimAutoRPConfCandRPAddr IpAddress,
juniPimAutoRPConfGroupAccessListName OCTET STRING,
juniPimAutoRPConfRowStatus RowStatus,
juniPimAutoRPConfTTL Integer32,
juniPimAutoRPConfAncmntIntvl TimeTicks,
juniPimAutoRPConfifId InterfaceIndex }
juniPimAutoRPConfComponentIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value."
::= { juniPimAutoRPConfEntry 1 }
juniPimAutoRPConfCandRPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the candidate RP for this advertising agent
configuration."
::= { juniPimAutoRPConfEntry 2 }
juniPimAutoRPConfGroupAccessListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The access list name from which group ranges are picked up for
advertising agent configuration."
::= { juniPimAutoRPConfEntry 3 }
juniPimAutoRPConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be created, or old
entries deleted from this table."
::= { juniPimAutoRPConfEntry 4 }
juniPimAutoRPConfTTL OBJECT-TYPE
SYNTAX Integer32 (1..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time-to-live value used while sending AutoRP advertisement out for
this group-to-RP mappings created as a result of this configuration.
This should be set along with juniPimAutoRPConfRowStatus while creating
an AutoRP advertising agent to denote the TTL value to be used."
DEFVAL { 64 }
::= { juniPimAutoRPConfEntry 5 }
juniPimAutoRPConfAncmntIntvl OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval at which AutoRP advertisements are sent out for the
group-to-RP mappings created as a result of this configuration. This
should be set along with juniPimAutoRPConfRowStatus while creating an
AutoRP advertising agent to denote the announcement interval to be
used."
DEFVAL { 60 }
::= { juniPimAutoRPConfEntry 6 }
juniPimAutoRPConfifId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the interface for the candidate RP if an
interface with that address exists else it is set to 0."
::= { juniPimAutoRPConfEntry 7 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM AutoRP candidate RP table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimAutoRPCandTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimAutoRPCandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing AutoRP candidate RPS (advertising
agents)."
::= { juniPimGlobal 17 }
juniPimAutoRPCandEntry OBJECT-TYPE
SYNTAX JuniPimAutoRPCandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimAutoRPCandTable."
INDEX { juniPimAutoRPCandComponentIndex,
juniPimAutoRPCandRPAddr,
juniPimAutoRPCandGroupAddr,
juniPimAutoRPCandGroupMask }
::= { juniPimAutoRPCandTable 1 }
JuniPimAutoRPCandEntry ::= SEQUENCE {
juniPimAutoRPCandComponentIndex Integer32,
juniPimAutoRPCandRPAddr IpAddress,
juniPimAutoRPCandGroupAddr IpAddress,
juniPimAutoRPCandGroupMask IpAddress,
juniPimAutoRPCandRowStatus RowStatus,
juniPimAutoRPCandAccessListName OCTET STRING,
juniPimAutoRPCandAutoRPTTL Integer32,
juniPimAutoRPCandAutoRPAncmntIntvl TimeTicks,
juniPimAutoRPCandIfId InterfaceIndex }
juniPimAutoRPCandComponentIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value."
::= { juniPimAutoRPCandEntry 1 }
juniPimAutoRPCandRPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the candidate RP for this group-to-RP mapping."
::= { juniPimAutoRPCandEntry 2 }
juniPimAutoRPCandGroupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address of the candidate RP for this group-to-RP mapping."
::= { juniPimAutoRPCandEntry 3 }
juniPimAutoRPCandGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group mask of the candidate RP for this group-to-RP mapping."
::= { juniPimAutoRPCandEntry 4 }
juniPimAutoRPCandRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of this row."
::= { juniPimAutoRPCandEntry 5 }
juniPimAutoRPCandAccessListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the group list using which this AutoRP group-to-RP
candidate RP mapping was configured."
::= { juniPimAutoRPCandEntry 6 }
juniPimAutoRPCandAutoRPTTL OBJECT-TYPE
SYNTAX Integer32(1..'FFFF'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time-to-live value used while sending AutoRP advertisement out for
this group-to-RP mapping."
::= { juniPimAutoRPCandEntry 7 }
juniPimAutoRPCandAutoRPAncmntIntvl OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval at which AutoRP advertisements are sent out for this
group-to-RP mapping."
::= { juniPimAutoRPCandEntry 8 }
juniPimAutoRPCandIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the interface for this AutoRP group-to-RP
candidate RP mapping if an interface for RP address exists else it is
set to 0."
::= { juniPimAutoRPCandEntry 9 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM Component Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing each component (domain) in PIM."
::= { juniPimGlobal 18 }
juniPimComponentEntry OBJECT-TYPE
SYNTAX JuniPimComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimComponentTable."
INDEX { juniPimComponentIndex }
::= { juniPimComponentTable 1 }
JuniPimComponentEntry ::= SEQUENCE {
juniPimComponentIndex Integer32,
juniPimComponentAutoRPMappingAgentRowStatus RowStatus,
juniPimComponentConfiguredAutoRPMappingAgentIfId InterfaceIndex,
juniPimComponentAutoRPMappingAgentInterval TimeTicks,
juniPimComponentAutoRPMappingTTL Integer32,
juniPimComponentAutoRPMappingAgentIntfAddr IpAddress,
juniPimComponentAutoRPMappingAgentWinnerAddr IpAddress,
juniPimComponentAutoRPMappingAgentWinnerLastHeard TimeTicks }
juniPimComponentIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component. Each protocol instance
connected to a separate domain should have a different index value."
::= { juniPimComponentEntry 1 }
juniPimComponentAutoRPMappingAgentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of AutoRP mapping agent by which this router can be made an
AutoRP mapping agent or removed from being an AutoRP mapping agent in
this component."
::= { juniPimComponentEntry 2 }
juniPimComponentConfiguredAutoRPMappingAgentIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface index of the interface which mapping agent should use to
send AutoRP mapping messages. If not specified, the interface with
highest IP address in this domain is picked up for this purpose."
::= { juniPimComponentEntry 3 }
juniPimComponentAutoRPMappingAgentInterval OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval at which AutoRP mapping messages are sent out in this
component. The default value is 60 seconds."
DEFVAL { 60 }
::= { juniPimComponentEntry 4 }
juniPimComponentAutoRPMappingTTL OBJECT-TYPE
SYNTAX Integer32 (1..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time-to-live value used while sending AutoRP mapping messages out
in this component."
DEFVAL { 64 }
::= { juniPimComponentEntry 5 }
juniPimComponentAutoRPMappingAgentIntfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface which mapping agent is using to send
AutoRP mapping messages."
::= { juniPimComponentEntry 6 }
juniPimComponentAutoRPMappingAgentWinnerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the winner AutoRP mapping agent. There can be
multiple mapping agents configured in a given PIM domain(component).
The mapping agent with highest IP address is chosen as the winner and it
continues to send AutoRP mapping messages. If the router itself is the
winner, then this is set to 0.0.0.0."
::= { juniPimComponentEntry 7 }
juniPimComponentAutoRPMappingAgentWinnerLastHeard OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) that has past since an AutoRP mapping message was
receieved from the winner AutoRP mapping agent. If the router itself is
the winner, then this is set to 0."
::= { juniPimComponentEntry 8 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM Unicast Route Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimUnicastRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimUnicastRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all the unicast routes currently in use
by PIM for diong RPF checking."
::= { juniPimGlobal 19 }
juniPimUnicastRouteEntry OBJECT-TYPE
SYNTAX JuniPimUnicastRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimUnicastRouteTable."
INDEX { juniPimUnicastRouteEntryAddr,
juniPimUnicastRouteEntryMask }
::= { juniPimUnicastRouteTable 1 }
JuniPimUnicastRouteEntry ::= SEQUENCE {
juniPimUnicastRouteEntryAddr IpAddress,
juniPimUnicastRouteEntryMask IpAddress,
juniPimUnicastRouteEntryRpfNbr IpAddress,
juniPimUnicastRouteEntryIifId InterfaceIndex,
juniPimUnicastRouteEntryIifAddr IpAddress,
juniPimUnicastRouteEntryPref Integer32,
juniPimUnicastRouteEntryMetric Integer32,
juniPimUnicastRouteEntryPimType JuniPimType }
juniPimUnicastRouteEntryAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of route in use."
::= { juniPimUnicastRouteEntry 1 }
juniPimUnicastRouteEntryMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask of route in use."
::= { juniPimUnicastRouteEntry 2 }
juniPimUnicastRouteEntryRpfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RPF neighbor (next-hop) to reach the route of this entry. It is
set to 0.0.0.0 for directly connected routes."
::= { juniPimUnicastRouteEntry 3 }
juniPimUnicastRouteEntryIifId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index (next-hop) to reach the route of this entry."
::= { juniPimUnicastRouteEntry 4 }
juniPimUnicastRouteEntryIifAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface address (next-hop) to reach the route of this entry."
::= { juniPimUnicastRouteEntry 5 }
juniPimUnicastRouteEntryPref OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference of the route of this entry."
::= { juniPimUnicastRouteEntry 6 }
juniPimUnicastRouteEntryMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of the route of this entry."
::= { juniPimUnicastRouteEntry 7 }
juniPimUnicastRouteEntryPimType OBJECT-TYPE
SYNTAX JuniPimType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the route specified in this entry is
being used by sparse-mode and/or dense-mode PIM."
::= { juniPimUnicastRouteEntry 8 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The PIM Shortest Path Tree Threshold Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimSPTThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniPimSPTThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing threshold values set for switching from
shared tree to shortest path tree and vice versa for data forwarded by
PIM sparse-mode."
::= { juniPimGlobal 20 }
juniPimSPTThresholdEntry OBJECT-TYPE
SYNTAX JuniPimSPTThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the juniPimSPTThresholdTable."
INDEX { juniPimSPTThresholdAccessListName }
::= { juniPimSPTThresholdTable 1 }
JuniPimSPTThresholdEntry ::= SEQUENCE {
juniPimSPTThresholdAccessListName OCTET STRING,
juniPimSPTThresholdRowStatus RowStatus,
juniPimSPTThresholdKbps Integer32 }
juniPimSPTThresholdAccessListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the access list from which group ranges are picked up for
setting SPT threshold in this entry."
::= { juniPimSPTThresholdEntry 1 }
juniPimSPTThresholdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be created, or old
entries deleted from this table."
::= { juniPimSPTThresholdEntry 2 }
juniPimSPTThresholdKbps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of SPT threshold in kilobits per second. Default value is
0."
DEFVAL { 0 }
::= { juniPimSPTThresholdEntry 3 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniPimConformance OBJECT IDENTIFIER ::= { juniPimMIB 2 }
juniPimCompliances OBJECT IDENTIFIER ::= { juniPimConformance 1 }
juniPimGroups OBJECT IDENTIFIER ::= { juniPimConformance 2 }
--
-- compliance statements
--
juniPimCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the Juniper PIM
MIB."
MODULE -- this module
MANDATORY-GROUPS {
juniPimGeneralGroup,
juniPimInterfaceGroup,
juniPimMRouteConfGroup,
juniPimMRouteNextHopGroup,
juniPimRPSetGroup,
juniPimStaticRPConfGroup,
juniPimAutoRPConfGroup,
juniPimAutoRPCandGroup,
juniPimComponentGroup,
juniPimUnicastRouteGroup,
juniPimSPTThresholdGroup }
::= { juniPimCompliances 1 }
-- units of conformance
juniPimGeneralGroup OBJECT-GROUP
OBJECTS {
juniPimNumHelloRcvd,
juniPimNumJoinPruneRcvd,
juniPimNumAssertRcvd,
juniPimNumGraftRcvd,
juniPimNumGraftAckRcvd,
juniPimNumHelloSent,
juniPimNumJoinPruneSent,
juniPimNumAssertSent,
juniPimNumGraftSent,
juniPimNumGraftAckSent }
STATUS current
DESCRIPTION
"A collection of objects for managing general PIM capabilities in a
Juniper product."
::= { juniPimGroups 1 } -- JUNOSe 3.0
juniPimInterfaceGroup OBJECT-GROUP
OBJECTS {
juniPimIntfNumHelloRcvd,
juniPimIntfNumJoinPruneRcvd,
juniPimIntfNumAssertRcvd,
juniPimIntfNumGraftRcvd,
juniPimIntfNumGraftAckRcvd,
juniPimIntfNumHelloSent,
juniPimIntfNumJoinPruneSent,
juniPimIntfNumAssertSent,
juniPimIntfNumGraftSent,
juniPimIntfNumGraftAckSent,
juniPimIntfVersion,
juniPimIntfNumNbrs }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM interface capabilities in a
Juniper product."
::= { juniPimGroups 2 }
juniPimMRouteConfGroup OBJECT-GROUP
OBJECTS {
juniPimMRouteUpstreamAssertTimer,
juniPimMRouteAssertMetric,
juniPimMRouteAssertPref,
juniPimMRouteAssertRPTBit,
juniPimMRouteBits,
juniPimMRouteRPAddrInUse,
juniPimMRouteUpstreamNbr,
juniPimMRouteIifAddr,
juniPimMRouteIsWaitingToSwitchToSPT,
juniPimMRouteEntryExpiryTimer,
juniPimMRouteSenderDRAddr,
juniPimMRouteRouteAddr,
juniPimMRouteRouteMask,
juniPimMRouteGRPAddr,
juniPimMRouteGRPMask,
juniPimMRouteOtherProtoOifJoinTypeAll,
juniPimMRouteOtherProtoOifJoinTypeG,
juniPimMRouteOtherProtoOifJoinTypeSG,
juniPimMRoutePimType }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM multicast route capabilities
in a Juniper product."
::= { juniPimGroups 3 }
juniPimMRouteNextHopGroup OBJECT-GROUP
OBJECTS {
juniPimMRouteNextHopPruneReason,
juniPimMRouteNextHopJoinTypeSSRP,
juniPimMRouteNextHopJoinTypeG,
juniPimMRouteNextHopJoinTypeSG,
juniPimMRouteNextHopHasLGM,
juniPimMRouteNextHopHasOifAW,
juniPimMRouteNextHopHasOifSendAssert,
juniPimMRouteNextHopHasOifRegister,
juniPimMRouteNextHopHasOifBorderBit,
juniPimMRouteNextHopHasOifNullEncapsBit,
juniPimMRouteNextHopJoinEndTimer,
juniPimMRouteNextHopAssertEndTimer,
juniPimMRouteNextHopNextAssertTimer,
juniPimMRouteNextHopAssertSrcAddress,
juniPimMRouteNextHopRegisterSuppressionTimer,
juniPimMRouteNextHopPimType,
juniPimMRouteNextHopPruneTimeLeft,
juniPimMRouteNextHopsendingIpAddress }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM multicast route next hop
capabilities in a Juniper product."
::= { juniPimGroups 4 }
juniPimRPSetGroup OBJECT-GROUP
OBJECTS {
juniPimRPSetPriority,
juniPimRPSetTypeInfo,
juniPimRPSetAccessListName }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM RP-Set capabilities in a
Juniper product."
::= { juniPimGroups 5 }
juniPimStaticRPConfGroup OBJECT-GROUP
OBJECTS {
juniPimStaticRPConfRowStatus,
juniPimStaticRPConfOverride }
STATUS current
DESCRIPTION
"A collection of objects for managing statically configured PIM RPs
capabilities in a Juniper product."
::= { juniPimGroups 6 }
juniPimAutoRPConfGroup OBJECT-GROUP
OBJECTS {
juniPimAutoRPConfRowStatus,
juniPimAutoRPConfTTL,
juniPimAutoRPConfAncmntIntvl,
juniPimAutoRPConfifId }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM AutoRP candidate advertisment
agent RP capabilities in a Juniper product."
::= { juniPimGroups 7 }
juniPimAutoRPCandGroup OBJECT-GROUP
OBJECTS {
juniPimAutoRPCandRowStatus,
juniPimAutoRPCandAccessListName,
juniPimAutoRPCandAutoRPTTL,
juniPimAutoRPCandAutoRPAncmntIntvl,
juniPimAutoRPCandIfId }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM AutoRP candidate advertising
agent RP capabilities in a Juniper product."
::= { juniPimGroups 8 }
juniPimComponentGroup OBJECT-GROUP
OBJECTS {
juniPimComponentAutoRPMappingAgentRowStatus,
juniPimComponentConfiguredAutoRPMappingAgentIfId,
juniPimComponentAutoRPMappingAgentInterval,
juniPimComponentAutoRPMappingTTL,
juniPimComponentAutoRPMappingAgentIntfAddr,
juniPimComponentAutoRPMappingAgentWinnerAddr,
juniPimComponentAutoRPMappingAgentWinnerLastHeard }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM component (domain)
capabilities in a Juniper product."
::= { juniPimGroups 9 }
juniPimUnicastRouteGroup OBJECT-GROUP
OBJECTS {
juniPimUnicastRouteEntryRpfNbr,
juniPimUnicastRouteEntryIifId,
juniPimUnicastRouteEntryIifAddr,
juniPimUnicastRouteEntryPref,
juniPimUnicastRouteEntryMetric,
juniPimUnicastRouteEntryPimType }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM unicast route capabilities in
a Juniper product."
::= { juniPimGroups 10 }
juniPimSPTThresholdGroup OBJECT-GROUP
OBJECTS {
juniPimSPTThresholdRowStatus,
juniPimSPTThresholdKbps }
STATUS current
DESCRIPTION
"A collection of objects for managing PIM shortest path tree threshold
capabilities in a Juniper product."
::= { juniPimGroups 11 }
END
Reference in New Issue Copy Permalink