5081 lines
182 KiB
Plaintext
5081 lines
182 KiB
Plaintext
|
ASAM-EQUIP-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
-- ==========================================================================
|
||
|
|
-- This specification is published by Alcatel-Lucent under Non-Disclosure
|
||
|
|
-- Agreement(s) (NDA) with specific parties and has to be considered as
|
||
|
|
-- Confidential Information as defined in such NDA.
|
||
|
|
-- Alcatel-Lucent reserves the right to revise this document for any reason,
|
||
|
|
-- including but not limited to conformity with standards promulgated by
|
||
|
|
-- various agencies, utilisation of advances in the state of the technical
|
||
|
|
-- areas, or the reflection of changes in the design of any equipment,
|
||
|
|
-- techniques, or procedures described or referred to herein.
|
||
|
|
-- The product specifications and other technical or performance information
|
||
|
|
-- contained herein are subject to change without notice.
|
||
|
|
-- Updates of this document will be issued under the above NDA's.
|
||
|
|
-- Alcatel-Lucent makes no representation or warranty, expressed or implied,
|
||
|
|
-- with respect to the sufficiency, accuracy, or utility of any information
|
||
|
|
-- or opinion contained herein. Alcatel-Lucent expressly advises that any
|
||
|
|
-- use of for any purpose or reliance upon this technical reference is at
|
||
|
|
-- the risk of the user and that Alcatel-Lucent shall not be liable for any
|
||
|
|
-- damage or injury incurred by any person arising out of the sufficiency,
|
||
|
|
-- accuracy, or utility of any information or opinion contained herein.
|
||
|
|
-- This document is not to be construed as a suggestion to any manufacturer
|
||
|
|
-- to modify or change any of its products, nor does this document represent
|
||
|
|
-- any commitment by Alcatel-Lucent to sell or purchase any product.
|
||
|
|
-- Nothing contained herein shall be construed as conferring by implication,
|
||
|
|
-- estoppel, or otherwise any license or right under any patent, whether or
|
||
|
|
-- not the use of any information herein necessarily employs an invention of
|
||
|
|
-- any existing or later issued patent.
|
||
|
|
-- Alcatel-Lucent reserves the right not to offer any or all of these
|
||
|
|
-- products and to withdraw any or all of them at any future time.
|
||
|
|
-- Copyright (C) 2001-2009, Alcatel-Lucent. All Rights Reserved.
|
||
|
|
-- ===========================================================================
|
||
|
|
--
|
||
|
|
-- MODULE-IDENTITY
|
||
|
|
-- LAST-UPDATED "201512130000Z"
|
||
|
|
-- ORGANIZATION "Alcatel-Lucent"
|
||
|
|
-- CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.com"
|
||
|
|
--
|
||
|
|
-- REVISION "201702100000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Bart De Vos
|
||
|
|
-- Reason for change: add support for an RFT-C power module on SX-48U (SRNT-K)
|
||
|
|
--
|
||
|
|
-- REVISION "201611070000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Yangxiong Xia
|
||
|
|
-- Reason for change: add new shelf mode ngpon-port-reduced(9) to eqptHolderMode object for isam 7362 SF 16-GW and DF 16-GW Low capacity
|
||
|
|
--
|
||
|
|
-- REVISION "201610210000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Lut Mertens
|
||
|
|
-- Reason for change: Replace EqptHolderIndex by EqptPowerSupplyIndex in eqptPowerSupplyId object
|
||
|
|
--
|
||
|
|
-- REVISION "201610170000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- Version: 3EC36485EDAA_V5.6.0.0.0
|
||
|
|
-- Editor: Mani Batta
|
||
|
|
-- Reason for change: RCR: ALU01872170 (Reset LT restart counter)
|
||
|
|
-- Change: Introduced two MIBs- eqptBoardRestartCountPerLt and eqptBoardClearRestartCountPerLt in ASAM-EQUIP-MIB.mib.
|
||
|
|
--
|
||
|
|
-- REVISION "201608290000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Weihai LU
|
||
|
|
-- Reason for change: add new shelf mode ngpon_supported(7) and gpon_supported(8) to eqptHolderMode object
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201602080000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Eirini Tzimi
|
||
|
|
-- Reason for change: add new shelf mode ntbntioextlt-unsupported(4) to eqptHolderMode object
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201512220000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Qiong K WU
|
||
|
|
-- Reason for change: ALU02004304 (Next generation NT-FANT-G)
|
||
|
|
-- Change: add new eqptPortMappingPhyPortType: cfp(14)
|
||
|
|
--
|
||
|
|
-- REVISION "201512130000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Laurent Carlier
|
||
|
|
-- Reason for change: add eqptPowerSupplyTable table
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201404150000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Bala Amudha Pal Samy
|
||
|
|
-- Changes :
|
||
|
|
-- Added a new mode ntb-unsupported(3) to eqptHolderMode object (ALU01919868)
|
||
|
|
--
|
||
|
|
-- REVISION "201310230000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Qiong K WU
|
||
|
|
-- Reason for change: ALU01870122 ISR50 DPoE data path redundancy (Phase I)
|
||
|
|
-- Change: Add new reason for eqptProtElementStandbyStatuschangeReason
|
||
|
|
-- Add new reason for eqptProtGroupLastSwitchoverReason
|
||
|
|
--
|
||
|
|
-- REVISION "201309180000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Editor: Tom Van Peteghem
|
||
|
|
-- Reason for change: ALU01873072 NELT-B VLAN/QoS resource pooling
|
||
|
|
-- Change: Add eqptBoardPlannedResourceTable
|
||
|
|
--
|
||
|
|
|
||
|
|
-- REVISION "201304250000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.6.0.0.3
|
||
|
|
-- Editor: Karel Meijfroidt
|
||
|
|
-- Reason for change: ALU01815260, Alarm Mechanism Improvement
|
||
|
|
-- Change: change the RANGE in the description of the eqptCustAlarmProfileSeverity.
|
||
|
|
--
|
||
|
|
-- REVISION "201304090000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.6.0.0.2
|
||
|
|
-- Editor: Marita Saveyn
|
||
|
|
-- Reason for change: ALU01873776, eqptPortMapping attributes returns NoSuch Instance for ISAM4501, FANT-F board
|
||
|
|
-- Change: EqptPortMappingTable: changes to eqptPortMappingLogPortType (add 4) and eqptPortMappingPhyPortSlot (desc)
|
||
|
|
-- eqptPortMappingPhyPortType (add 13) and eqptPortMappingPhyPortNbr (desc)
|
||
|
|
--
|
||
|
|
-- REVISION "201303260000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.6.0.0.1
|
||
|
|
-- Editor: Vanapatla Ramana
|
||
|
|
-- Reason for change: ALU01868639, MIB readiness for 2.5G Expansion links on NRNT-A
|
||
|
|
-- Change: eqptSlotPlannedCapabilityProfile: change to description.
|
||
|
|
--
|
||
|
|
-- REVISION "201303200000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.6.0.0.0
|
||
|
|
-- Editor: Long Zhigang
|
||
|
|
-- Changes: Add three new attributes in eqptHolderTable (RCR ALU01814646)
|
||
|
|
-- - eqptHolderSerialNumber
|
||
|
|
-- - eqptHolderVariant
|
||
|
|
-- - eqptHolderICScode
|
||
|
|
--
|
||
|
|
-- REVISION "201201008000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.5.0.0.0
|
||
|
|
-- Editor: Dirk De la Marche
|
||
|
|
-- Changes: Change to description of CTRL functionality (NRCD-C introduction)
|
||
|
|
--
|
||
|
|
-- REVISION "201208220000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.5.0.0.0
|
||
|
|
-- Editor: Vijayakumar Kanniah
|
||
|
|
-- Changes: eqptHolderMode: change to description (RCR ALU01807846)
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201208100000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.4.0.3.0
|
||
|
|
-- Editor: Marita Saveyn
|
||
|
|
-- Changes: eqptProtGroupTable: change to description (ALU01810586)
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201202090000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.4.0.0.0
|
||
|
|
-- Editor: Danny Sioncke
|
||
|
|
-- Changes: Added eqptPortProtectionTable (RCR ALU00123609)
|
||
|
|
-- Added eqptPortProtectionLookupTable (RCR ALU00123609)
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201104290000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.3.0.0.1
|
||
|
|
-- Editor: Vijayakumar Kanniah
|
||
|
|
-- Changes: Added eqptBoardOperError download-ongoing for supporting NRCD-B Automatic download (IR ALU01198543)
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201103040000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.3.0.0.0
|
||
|
|
-- Editor: Lieve Dierick
|
||
|
|
-- Changes :
|
||
|
|
-- ALU01096382 : new MIB object to store the intelligent FAN mode (IR ALU01096386)
|
||
|
|
--
|
||
|
|
-- REVISION "201008090000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.2.0.1.4
|
||
|
|
-- Editor: Tom Van Peteghem
|
||
|
|
-- Changes :
|
||
|
|
-- ALU00492406 : MIB description of the eqptBoardInventorySerialNumber
|
||
|
|
-- must be extended with year/week info
|
||
|
|
--
|
||
|
|
-- REVISION "201005110000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.2.0.0.1
|
||
|
|
-- Editor: Jean Samoise
|
||
|
|
-- Changes :
|
||
|
|
-- AALU00117331 :
|
||
|
|
-- Add scalar global change counter for remote lt portmapping changes.
|
||
|
|
---
|
||
|
|
-- REVISION "201003290000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.2.0.0.0
|
||
|
|
-- Editor: Jean Samoise
|
||
|
|
-- Changes :
|
||
|
|
-- AALU00117331 :
|
||
|
|
-- Generate trap at configuration change of the PortMapping data.
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- REVISION "201003040000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.2.0.0.0
|
||
|
|
-- Editor: Jean SamoiseIR context drop NRNT-A
|
||
|
|
-- Changes :
|
||
|
|
-- ALU00159858 :
|
||
|
|
-- Add eth,vp, mcast to eqptPortMappingPhyPortType
|
||
|
|
--- REVISION "200910010000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EDAA_V4.0.0.0.0
|
||
|
|
-- Editor: Rik Verstraete
|
||
|
|
-- Changes :
|
||
|
|
-- ANTmt71411 ISAM/FTTU Merge Equipment Domain
|
||
|
|
-- Add eqptBoardIfSlotId to eqptBoardTable
|
||
|
|
--
|
||
|
|
-- REVISION "200908250000Z "
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V4.1.0.0.2
|
||
|
|
-- Editor : Peter Van Mele
|
||
|
|
-- Reason for change: ANTmt72355, licensing of load balancing/redundancy
|
||
|
|
-- Change: default value of the NT redundancy protection group is disabled.
|
||
|
|
--
|
||
|
|
-- REVISION "2009071300000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V4.1.0.0.1
|
||
|
|
-- Editor: Dirk De la Marche
|
||
|
|
-- Changes :
|
||
|
|
-- eqptProtElementStandbyStatuschangeReason : new additions
|
||
|
|
-- due to NANT-D redundancy (See ANTms38234)
|
||
|
|
-- new values: (18), (19) and (20)
|
||
|
|
--
|
||
|
|
-- REVISION "20090630"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V4.1.0.0.0
|
||
|
|
-- Editor : Sven Dhuyvetter
|
||
|
|
-- Reason for change: ANTms80204, 'Up/Downlink faceplate nr mapping for O
|
||
|
|
-- Change: Add new PortMapping table definition.
|
||
|
|
--
|
||
|
|
-- REVISION "2009012210007Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V4.0.0.0.1
|
||
|
|
-- Editor: Viviane Verswijvel
|
||
|
|
-- Changes :
|
||
|
|
-- eqptProtElementStandbyStatuschangeReason : new desccriptions
|
||
|
|
-- to be compatible with XVPS (See FR ANTmt34321)
|
||
|
|
--
|
||
|
|
-- REVISION "200803040000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.7.0.0.3
|
||
|
|
-- Editor: Furqan Haq
|
||
|
|
-- Changes :
|
||
|
|
-- Added a new mode ntio-unsupported(6) to eqptHolderMode object
|
||
|
|
-- Added a new mnemonics NOT_ALLOWED to eqptSlotPlannedType
|
||
|
|
-- Added new error type to eqptBoardOperError for reporting
|
||
|
|
-- BoardInsertedInIncompatibleSlot
|
||
|
|
--
|
||
|
|
-- REVISION "200803104000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.7.0.0.0
|
||
|
|
-- Editor: Viviane Verswijvel
|
||
|
|
-- Changes:
|
||
|
|
-- Add 2 new reasons for switch over
|
||
|
|
-- Add reason for standby change state reason
|
||
|
|
-- => Hitless Redundancy R3.7
|
||
|
|
--
|
||
|
|
-- REVISION "200711080000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.6.0.0.2
|
||
|
|
-- Editor: Danny Sioncke
|
||
|
|
-- Changes:
|
||
|
|
-- In eqptBoardTable, eqptBoardDualHostIPAddress and
|
||
|
|
-- eqptBoardDualHostLsmLocation are added.
|
||
|
|
-- REVISION "200707260000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.6.0.0.0
|
||
|
|
-- Editor: Lu Hao
|
||
|
|
-- Changes:
|
||
|
|
-- Add a new table, eqptBoardThermalSensorTable to eqptEquipmentMIB
|
||
|
|
--
|
||
|
|
-- REVISION "200707240000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.5.0.0.3
|
||
|
|
-- Editor: Bo Liu
|
||
|
|
-- Changes:
|
||
|
|
-- restartFromDefaultPresOAM and restartFromDefaultTotal are no longer
|
||
|
|
-- supported in eqptAsamRestart.
|
||
|
|
--
|
||
|
|
-- REVISION "200706010000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.5.0.0.2
|
||
|
|
-- Editor: Bo Liu
|
||
|
|
-- Changes:
|
||
|
|
-- Add the new equipment practice LEWW in the description of
|
||
|
|
-- eqptHolderPlannedType.
|
||
|
|
--
|
||
|
|
-- REVISION "200705230000Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.5.0.0.1
|
||
|
|
-- Editor: Wang Jianglin
|
||
|
|
-- Changes:
|
||
|
|
-- Add the xVPS identifier to equipment table.
|
||
|
|
--
|
||
|
|
-- REVISION "200705210900Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.5.0.0.0
|
||
|
|
-- Editor: Liu Jie
|
||
|
|
-- Changes:
|
||
|
|
-- - Add the test head type for four-wire or two-wire test
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- MODULE-IDENTITY
|
||
|
|
-- LAST-UPDATED "200704241735Z"
|
||
|
|
-- ORGANIZATION "Alcatel"
|
||
|
|
-- CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.be"
|
||
|
|
--
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The ASAM Equipment Management MIB is a vendor-specific MIB that is
|
||
|
|
-- used to manage the equipment (racks, shelves, and pluggable equipment)
|
||
|
|
-- of the ASAM subsystem in the ESAM.
|
||
|
|
--
|
||
|
|
-- REVISION "200706151600Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.4.0.0.2
|
||
|
|
-- Editor: Sven Dhuyvetter
|
||
|
|
-- Changes:
|
||
|
|
-- - restartFromDefaultPresOAM and restartFromDefaultTotal no longer
|
||
|
|
-- supported in eqptAsamRestart.
|
||
|
|
--
|
||
|
|
-- REVISION "200703291600Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.4.0.0.1
|
||
|
|
-- Editor: Danny Sioncke
|
||
|
|
-- Changes:
|
||
|
|
-- - CTRL added in descriptions where applicable.
|
||
|
|
--
|
||
|
|
-- REVISION "200702021600Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.4.0.0.0
|
||
|
|
-- Editor: He Yang
|
||
|
|
-- Changes:
|
||
|
|
-- - Add three parameter in eqptboardtable: eqptBoardLastRestartCause,
|
||
|
|
-- eqptBoardLastRestartTime, eqptBoardRestartNumberOfChanges.
|
||
|
|
-- - Add eqptRestartNumberOfChanges
|
||
|
|
--
|
||
|
|
-- REVISION "200704241735Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.3.0.2.2
|
||
|
|
-- Editor: John Chuah
|
||
|
|
-- Changes:
|
||
|
|
-- - reverted EqptTestChainEntry and eqptTestChainShelfToTapUp to
|
||
|
|
-- match the definition that was already shipped since R3.1"
|
||
|
|
--
|
||
|
|
-- REVISION "200704191800Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.3.0.2.1
|
||
|
|
-- Editor: Furqan Haq
|
||
|
|
-- Changes:
|
||
|
|
-- - reverted the index order of eqptProfileApplicabilityEntry to
|
||
|
|
-- match the definition that was already shipped since R2.5"
|
||
|
|
--
|
||
|
|
-- REVISION "200701041600Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.3.0.2.0
|
||
|
|
-- Editor: Sven Dhuyvetter
|
||
|
|
-- Changes:
|
||
|
|
-- - update DEFVALUE in ALCATEL NOTE.
|
||
|
|
--
|
||
|
|
-- REVISION "200612182245Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_V3.3.0.1.0
|
||
|
|
-- Editor: John Chuah
|
||
|
|
-- Changes:
|
||
|
|
-- - increased upper range of eqptMaxRacksPerAsam from 6 to 7 and
|
||
|
|
-- eqptMaxShelvesPerRack from 3 to 4.
|
||
|
|
-- - increased rack and shelf ranges for LEEU, LEUS and LNEU in
|
||
|
|
-- eqptHolderPlannedType.
|
||
|
|
--
|
||
|
|
-- REVISION "200609161200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.3.0.0
|
||
|
|
-- Editor: Zhu Sunbin
|
||
|
|
-- Changes:
|
||
|
|
-- - eqptProtGroupTable tablesize from 1 row to rows number depending on
|
||
|
|
-- shelf type in Alcatel Notes.
|
||
|
|
-- - eqptProtElementTable tablesize from 2 rows to rows number depending on
|
||
|
|
-- shelf type in Alcatel Notes.
|
||
|
|
-- - eqptProtElementGroupId DEFVALUE from 1 to NA
|
||
|
|
-- - eqptProtGroupId DEFVALUE from 1 to NA
|
||
|
|
-- - added notInService(2) in Alcatel Notes for eqptProtGroupRowStatus
|
||
|
|
--
|
||
|
|
-- REVISION "200606161200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.1.0.0.3
|
||
|
|
-- Editor: Lucien Marcotte
|
||
|
|
-- Changes:
|
||
|
|
-- - For HYNT, changed eqptMaxSlotsPerShelf from 21 to 22 in Alcatel Notes.
|
||
|
|
--
|
||
|
|
-- REVISION "200606011200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.1.0.0.2
|
||
|
|
-- Editor: Bo Liu
|
||
|
|
-- Changes: ITSC
|
||
|
|
-- - Added eqptTestChainTable.
|
||
|
|
--
|
||
|
|
-- REVISION "200605231200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.0.0.4
|
||
|
|
-- Editor: Danny Sioncke
|
||
|
|
-- Changes: - eqptCustAlarmProfile non-REM introduced items put to
|
||
|
|
-- "SUPPORT: NO".
|
||
|
|
--
|
||
|
|
-- REVISION "200604211200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.0.0.3
|
||
|
|
-- Editor: Danny Sioncke
|
||
|
|
-- Changes: - eqptCustAlarmProfile id changed from nr. 7 to nr. 8,
|
||
|
|
-- solving conflict with eqptTestChainTable (ITSC).
|
||
|
|
-- - references to asamCustAlarm-xxx corrected to
|
||
|
|
-- eqptCustAlarm-xxx
|
||
|
|
--
|
||
|
|
-- REVISION "200512131200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.0.0.2
|
||
|
|
-- Editor: Sven Dhuyvetter
|
||
|
|
-- Changes: update for 8 PVC (BDFhw31519)
|
||
|
|
-- - add eqptSlotPlannedCapabilityProfile to eqptBoardTable
|
||
|
|
-- - add eqptProfileApplicabilityTable
|
||
|
|
-- - add eqptProfileTable
|
||
|
|
-- - add eqptProfileDescriptionTable
|
||
|
|
-- Editor: Danny Sioncke
|
||
|
|
-- Changes: update for REM (BDFhw36030)
|
||
|
|
-- - add eqptCustAlarmProfileTable
|
||
|
|
-- - add eqptCustAlarmProfileMappingTable
|
||
|
|
--
|
||
|
|
-- REVISION "200511301200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E3.0.0.1
|
||
|
|
-- Editor: zhu jianhua
|
||
|
|
-- Changes: update for NEP (BDFhw62300), add eqptHolderMode
|
||
|
|
--
|
||
|
|
-- REVISION "200509161200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E2.4.0.0
|
||
|
|
-- Editor: vairamuthu karuppiah
|
||
|
|
-- Changes: "Added eqptBoardOperError sem-power-fail,sem-ups-fail"
|
||
|
|
--
|
||
|
|
-- REVISION "200506031200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E2.3.0.1
|
||
|
|
-- Editor: Bart Geldof/Christophe De Ras
|
||
|
|
-- Changes: ODM Framework
|
||
|
|
-- - Added ODM Eqt Boardtype treated as unmanaged board.
|
||
|
|
--
|
||
|
|
-- REVISION "200504281200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E2.3.0.0
|
||
|
|
-- Editor: Lucien Marcotte
|
||
|
|
-- Changes: HYNT FGR1.0 (new product release)
|
||
|
|
-- - Added the new Eqt Board current and planned type EXT_MANAGED.
|
||
|
|
--
|
||
|
|
-- REVISION "200412061200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E2.2.0.0
|
||
|
|
-- Editor: FAN Min
|
||
|
|
-- Changes: support the eqptProt Table for ISAM R2.2 NT Redundancy Feature
|
||
|
|
-- * eqptProtGroupLastSwitchoverReason : add "LanxFailure(13)""
|
||
|
|
--
|
||
|
|
-- REVISION "200411251200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E1.0.0.0
|
||
|
|
-- Editor: Steven Luykx
|
||
|
|
-- Changes: changes in comment, version is not stepped up"
|
||
|
|
--
|
||
|
|
-- REVISION "200401291200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485EAAA_E1.0.0.0
|
||
|
|
-- Editor: Rafael Van Driessche
|
||
|
|
-- Changes: first version for ESAM R1.0 and ESAM R1.1"
|
||
|
|
--
|
||
|
|
-- REVISION "200304241200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485AAAA_E5.0.0.3
|
||
|
|
-- Editor: Eric De Backer
|
||
|
|
-- Changes:
|
||
|
|
-- * eqptBoardInventoryLastFailedTest: change object type to OCTET string
|
||
|
|
-- (BDFaa50395)"
|
||
|
|
--
|
||
|
|
-- REVISION "200303261200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485AAAA_E5.0.1.0
|
||
|
|
-- Editor: Koen Van de Weyer
|
||
|
|
-- Changes:
|
||
|
|
-- * eqptBoardOperError: add "board-not-licensed" (BDFaa51682)"
|
||
|
|
--
|
||
|
|
-- REVISION "200309241200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485AAAA_E5.0.0.2
|
||
|
|
-- Editor: Frank Devolder
|
||
|
|
-- Changes:
|
||
|
|
-- * Decrease size of eqptHolderDescription from 255 to 127 bytes
|
||
|
|
-- (BDFaa46015).
|
||
|
|
-- * Remove eqptHwChangeOccurredTrap & eqptProtChangeOccurredTrap
|
||
|
|
-- (BDFaa44804).
|
||
|
|
-- * add initialValue(255) to definition of eqptBoardRestart
|
||
|
|
-- (BDFaa45317).
|
||
|
|
--
|
||
|
|
-- REVISION "200201151200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485AAAA_E5.0.0.1
|
||
|
|
-- Editor: Frank Devolder
|
||
|
|
-- Changes:
|
||
|
|
-- * eqptHolderAvailStatus: add state "offLine" and remove state
|
||
|
|
-- "unknown".
|
||
|
|
-- * eqptBoardSwOverruleStatus: only supported for LSMs.
|
||
|
|
-- * line-up enum values of:
|
||
|
|
-- eqptBoardOperError & eqptHolderOperError;
|
||
|
|
-- eqptBoardAvailStatus & eqptHolderAvailStatus;
|
||
|
|
-- eqptBoardRestart & eqptAsamRestart.
|
||
|
|
-- * Add object eqptBoardInventoryLastFailedTest.
|
||
|
|
-- * eqptBoardRestart: for ACU boards, only a restart without selftest is
|
||
|
|
-- supported."
|
||
|
|
--
|
||
|
|
-- REVISION "200106081200Z"
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Version: 3EC36485AAAA_E5.0.0.0
|
||
|
|
-- Editor: Frank Devolder
|
||
|
|
-- Changes: creation of new Equipment MIB for ASAM R5.0."
|
||
|
|
--
|
||
|
|
-- =============================================================================
|
||
|
|
|
||
|
|
IMPORTS IpAddress, TimeTicks,
|
||
|
|
Counter FROM RFC1155-SMI
|
||
|
|
DisplayString, RowStatus,
|
||
|
|
TruthValue FROM SNMPv2-TC
|
||
|
|
asam FROM SYSTEM-MIB
|
||
|
|
OBJECT-TYPE FROM RFC-1212
|
||
|
|
InterfaceIndex FROM ITF-MIB
|
||
|
|
AsamAlarmSeverityType FROM ASAM-ALARM-MIB
|
||
|
|
AsamNextProfileIndex,
|
||
|
|
AsamProfileRefCount,
|
||
|
|
AsamProfilePointer,
|
||
|
|
AsamProfileIndex,
|
||
|
|
AsamProfileName,
|
||
|
|
NetworkTimeInSeconds FROM ASAM-TC-MIB;
|
||
|
|
|
||
|
|
|
||
|
|
-- asam OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6)
|
||
|
|
-- internet(1) private(4) enterprises(1)
|
||
|
|
-- alcatel(637) asd(61) asam(1) }
|
||
|
|
|
||
|
|
asamEquipmentMIB OBJECT IDENTIFIER ::= { asam 23 }
|
||
|
|
|
||
|
|
-- MAX-INDEX ::= 2147483647 (= 7FFFFFFF HEX)
|
||
|
|
|
||
|
|
-- Start type definitions ==
|
||
|
|
|
||
|
|
EqptHolderIndex ::= INTEGER (1..255)
|
||
|
|
|
||
|
|
EqptPowerSupplyIndex ::= INTEGER (1..255)
|
||
|
|
|
||
|
|
EqptPowerRftcIndex ::= INTEGER (1..255)
|
||
|
|
|
||
|
|
EqptPowerRftcLineStatus ::= INTEGER {
|
||
|
|
ok(0),
|
||
|
|
notconnected(1),
|
||
|
|
highimpedant(2),
|
||
|
|
earthfault(3)}
|
||
|
|
|
||
|
|
EqptHolderIndexOrZero ::= INTEGER (0..255)
|
||
|
|
|
||
|
|
EqptSlotIndex ::= INTEGER (1..65535)
|
||
|
|
|
||
|
|
EqptCustAlarmProfileOutputType ::= INTEGER {
|
||
|
|
triggered(1), -- alarm output is triggered
|
||
|
|
notTriggered(2)} -- alarm output is not triggered
|
||
|
|
|
||
|
|
EqptCustAlarmProfilePolarityType ::= INTEGER {
|
||
|
|
inversed(1), -- inversed alarm polarity
|
||
|
|
normal(2)} -- normal alarm polarity
|
||
|
|
|
||
|
|
EqptPortMappingIndex ::= INTEGER
|
||
|
|
|
||
|
|
-- End type definitions ==
|
||
|
|
|
||
|
|
eqptAsam OBJECT IDENTIFIER ::= { asamEquipmentMIB 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Note on appliques:
|
||
|
|
--
|
||
|
|
-- The Equipment MIB is only used to manage appliques that are contained
|
||
|
|
-- in LT shelves or combo shelves. Appliques that are contained in separate
|
||
|
|
-- splitter shelves cannot be managed. Therefore, whenever this MIB
|
||
|
|
-- mentions an "applique", it is implicitly understood that this applique
|
||
|
|
-- is contained in the applique area of a combo shelf, or that it is the
|
||
|
|
-- NT-I/O applique in case of an LT shelf.
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START ASAM FIELDS |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptAsamId OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Unique identifier of the system.
|
||
|
|
In practice, this attribute contains the serial number of the most
|
||
|
|
recently equipped SMAS board within the main shelf.
|
||
|
|
|
||
|
|
Notice however that there are also shelves in which the SMAS is replaced
|
||
|
|
by a GFC board (e.g ARAM-B) or even shelves without SMAS/GFC in which
|
||
|
|
the serial number of the ACU is taken.
|
||
|
|
|
||
|
|
This attribute is used internally by the system in case both NTs
|
||
|
|
start-up simultaneously to determine whether either the database on
|
||
|
|
NT-A or the database on NT-B should be used as the systems database.
|
||
|
|
It's not the intention to make this attribute visible to an operator.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: '' UNITS: -"
|
||
|
|
::= { eqptAsam 1 }
|
||
|
|
|
||
|
|
eqptAsamRestart OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
restartWithSelfTest (1),
|
||
|
|
-- restart with selftest
|
||
|
|
restartWithoutSelfTest (2),
|
||
|
|
-- restart without selftest
|
||
|
|
-- restartFromDefaultPresOAM (3),
|
||
|
|
-- restart with removal of persistent data, but preserving the
|
||
|
|
-- management channel configuration data
|
||
|
|
-- restartFromDefaultTotal (4),
|
||
|
|
-- restart with removal of all persistent data, including the
|
||
|
|
-- management channel configuration data
|
||
|
|
restartHot (5),
|
||
|
|
-- system hot restart
|
||
|
|
initialValue (255)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute is used to restart the system. The persistent data is preserved.
|
||
|
|
Contains previous restart reason, if not available it contains value 255.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: initialValue (255) UNITS: -"
|
||
|
|
::= { eqptAsam 2 }
|
||
|
|
|
||
|
|
eqptMaxRacksPerAsam OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is initialized by the system and specifies the maximum
|
||
|
|
number of racks supported by the system.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptAsam 3 }
|
||
|
|
|
||
|
|
eqptMaxShelvesPerRack OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is initialized by the system and specifies the maximum
|
||
|
|
number of shelves which can be equipped within one rack.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptAsam 4 }
|
||
|
|
|
||
|
|
eqptMaxSlotsPerShelf OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is initialized by the system and specifies the maximum
|
||
|
|
number of regular slots supported by one shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..22
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptAsam 5 }
|
||
|
|
|
||
|
|
eqptHwNumberOfChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the number of configuration or
|
||
|
|
status changes in the Equipment MIB objects. This counter is
|
||
|
|
incremented each time any of the summary table objects change.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptAsam 6 }
|
||
|
|
|
||
|
|
eqptProtNumberOfChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the overall number of status
|
||
|
|
changes in the equipment protection MIB objects. This counter is
|
||
|
|
incremented each time any of the eqptProtGroupNumberOfChanges
|
||
|
|
counters is incremented.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT:YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptAsam 7 }
|
||
|
|
|
||
|
|
eqptRestartNumberOfChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the overall number of status
|
||
|
|
changes in the eqptBoardRestartNumberOfChanges objects in
|
||
|
|
eqptBoardTable. This counter is incremented each time any of the
|
||
|
|
eqptBoardRestartNumberOfChanges counters is incremented.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptAsam 8 }
|
||
|
|
|
||
|
|
eqptFanMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
default (0),
|
||
|
|
eco (1),
|
||
|
|
protect (2),
|
||
|
|
classic (3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Parameter indicates the actually applied FAN tray mode:
|
||
|
|
|
||
|
|
'default': the fan packs run in average mode, predefined thermal margins are
|
||
|
|
used for defining/adapting the fan speeds
|
||
|
|
|
||
|
|
'eco': the fan packs run in 'green' mode, t.i. the most economical mode, minimal
|
||
|
|
thermal margins wrt default settings
|
||
|
|
|
||
|
|
'protect': the fan packs run in a heavy mode, t.i. wider thermal margins wrt
|
||
|
|
default settings
|
||
|
|
|
||
|
|
'classic': fixed speed settings apply wrt the fan - no SW control
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptAsam 9 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP ASAM FIELDS |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START HOLDER TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptHolderTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptHolderEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Equipment holder table, representing the system, the racks and
|
||
|
|
the shelves.
|
||
|
|
|
||
|
|
This table contains one row for the system, one row per rack,
|
||
|
|
and one row per shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 2 }
|
||
|
|
|
||
|
|
eqptHolderEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptHolderEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment holder table.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptHolderId }
|
||
|
|
::= { eqptHolderTable 1 }
|
||
|
|
|
||
|
|
EqptHolderEntry ::= SEQUENCE {
|
||
|
|
eqptHolderId EqptHolderIndex,
|
||
|
|
eqptHolderClass INTEGER,
|
||
|
|
eqptHolderPlannedType DisplayString,
|
||
|
|
eqptHolderActualType DisplayString,
|
||
|
|
eqptHolderAdminStatus INTEGER,
|
||
|
|
eqptHolderOperStatus INTEGER,
|
||
|
|
eqptHolderOperError INTEGER,
|
||
|
|
eqptHolderAvailStatus INTEGER,
|
||
|
|
eqptHolderDescription DisplayString,
|
||
|
|
eqptHolderContainerId INTEGER,
|
||
|
|
eqptHolderContainerOffset INTEGER,
|
||
|
|
eqptHolderMode INTEGER,
|
||
|
|
eqptHolderSerialNumber DisplayString,
|
||
|
|
eqptHolderVariant DisplayString,
|
||
|
|
eqptHolderICScode DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptHolderId OBJECT-TYPE
|
||
|
|
SYNTAX EqptHolderIndex
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index in equipment holder Table.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 1 }
|
||
|
|
|
||
|
|
eqptHolderClass OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
mainIqHcl (1), -- main shelf supporting both IQ-based and
|
||
|
|
-- HCL-based traffic
|
||
|
|
extIq (2), -- extension shelf supporting only IQ-based traffic
|
||
|
|
extHcl (3), -- extension shelf supporting only HCL-based traffic
|
||
|
|
mainEthernet (4), -- main shelf supporting Ethernet-based traffic
|
||
|
|
extEthernet (5) -- extension shelf supporting Ethernet-based traffic
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Classification of shelves. This object has no meaning for the
|
||
|
|
system and the rack equipment holders.
|
||
|
|
|
||
|
|
Note: for ISAM, only the values mainEthernet (4) and extEthernet (5)
|
||
|
|
are allowed.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NO RANGE: 1..5
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 2 }
|
||
|
|
|
||
|
|
eqptHolderPlannedType OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A string representing the planned type of equipment holder.
|
||
|
|
If the equipment holder is planned, the string consists of a
|
||
|
|
mnemonic, identifying the holder type.
|
||
|
|
This object is only writable for the entries that represent a shelf.
|
||
|
|
Other entries get a value corresponding to the detected equipment
|
||
|
|
practice type.
|
||
|
|
|
||
|
|
Following values are valid:
|
||
|
|
|
||
|
|
System-types:
|
||
|
|
=============
|
||
|
|
LAUS Large ASAM US market (6 racks, 3 shelves per rack)
|
||
|
|
LAEU Large ASAM EU market (6 racks, 3 shelves per rack)
|
||
|
|
LEEU Large ESAM EU market (7 racks, 4 shelves per rack)
|
||
|
|
LEUS Large ESAM US market (7 racks, 4 shelves per rack)
|
||
|
|
LNEU Large New EquipmentPractise EU market(7 racks, 4 shelves
|
||
|
|
per rack)
|
||
|
|
LEWW Large ESAM World Wide (7 racks, 4 shelves per rack)
|
||
|
|
LNWW Large ESAM World Wide (7 racks, 4 shelves per rack)
|
||
|
|
|
||
|
|
Rack-types:
|
||
|
|
===========
|
||
|
|
ALTR-A ADSL Line Termination Rack version A (US)
|
||
|
|
ALTR-E ADSL Line Termination Rack version E (ETSI 2200mm)
|
||
|
|
|
||
|
|
Shelf-types:
|
||
|
|
============
|
||
|
|
<SHELF_MNEMONIC> A shelf of a specific type. Refer to the ETSI
|
||
|
|
Configurations and US Configurations documents
|
||
|
|
for the list of shelf types that are supported
|
||
|
|
in a given system release.
|
||
|
|
|
||
|
|
NOT_PLANNED The shelf is not planned.
|
||
|
|
|
||
|
|
NOT_ALLOWED Shelf planning is not allowed in this position.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NO RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -"
|
||
|
|
::= { eqptHolderEntry 3 }
|
||
|
|
|
||
|
|
eqptHolderActualType OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A string representing the actual equipment holder type.
|
||
|
|
|
||
|
|
Following values are possible:
|
||
|
|
|
||
|
|
<HOLDER_MNEMONIC> Indicates the detected equipment holder-type.
|
||
|
|
Uses same mnemonics as described in object
|
||
|
|
eqptHolderPlannedType.
|
||
|
|
|
||
|
|
EMPTY Equipment holder is not detected
|
||
|
|
|
||
|
|
UNKNOWN The type of the detected holder is unknown.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 4 }
|
||
|
|
|
||
|
|
eqptHolderAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unlock(1),
|
||
|
|
lock(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Used by the administrator to lock or unlock an equipment holder.
|
||
|
|
This attribute is only supported for shelves.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 1 UNITS: -"
|
||
|
|
::= { eqptHolderEntry 5 }
|
||
|
|
|
||
|
|
eqptHolderOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute identifies whether or not the equipment holder is
|
||
|
|
capable of performing its normal functions.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 6 }
|
||
|
|
|
||
|
|
eqptHolderOperError OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
no-error(1), -- no-error or admin state = Down
|
||
|
|
type-mismatch(2),
|
||
|
|
holder-missing(3),
|
||
|
|
holder-installation-missing(4),
|
||
|
|
defense(15)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute describes for what reason the equipment holder is
|
||
|
|
not operational. These values correspond with the alarms that are
|
||
|
|
generated in case of a failure.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..4, 15
|
||
|
|
PERSIST: NO DEFVALUE: 1 UNITS: -"
|
||
|
|
::= { eqptHolderEntry 7 }
|
||
|
|
|
||
|
|
eqptHolderAvailStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
available(1), -- equipment holder is available
|
||
|
|
failed (3), -- equipment holder is detected but faulty
|
||
|
|
notInstalled (5), -- equipment holder is not installed
|
||
|
|
offLine (6) -- equipment holder has been disabled
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute indicates whether the equipment holder is
|
||
|
|
available or not.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 8 }
|
||
|
|
|
||
|
|
eqptHolderDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..127))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Text-field, which can for instance be used to describe the
|
||
|
|
location of the equipment holder.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: '' UNITS: -"
|
||
|
|
::= { eqptHolderEntry 9 }
|
||
|
|
|
||
|
|
eqptHolderContainerId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute describes in which equipment holder the equipment
|
||
|
|
holder is contained.
|
||
|
|
This object is only meaningful for racks and shelves, since the
|
||
|
|
system itself has no containing equipment holder.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 10 }
|
||
|
|
|
||
|
|
eqptHolderContainerOffset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute describes the position of the equipment holder
|
||
|
|
in the containing equipment holder.
|
||
|
|
This object is only meaningful for racks and shelves, since the
|
||
|
|
system itself has no containing equipment holder.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 11 }
|
||
|
|
|
||
|
|
eqptHolderMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
ntbntio-supported(1),
|
||
|
|
ntbntio-unsupported(2),
|
||
|
|
ntb-unsupported(3),
|
||
|
|
ntbntioextlt-unsupported(4),
|
||
|
|
ntio-unsupported(6),
|
||
|
|
ngpon-supported(7),
|
||
|
|
gpon-supported(8),
|
||
|
|
ngpon-port-reduced(9)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION "This attribute identifies the holder mode and is used by
|
||
|
|
both the NEP shelf and the ARAM-E shelf:
|
||
|
|
ntbntio-supported: this mode works in the same manner as iSAM XD. The
|
||
|
|
LSM can only be used on LSM slot. NT in NTB is supported. NTIO is
|
||
|
|
also supported.
|
||
|
|
ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as
|
||
|
|
LT slot. So, two more LSM can be supported in this mode. Therefore,
|
||
|
|
NTIO/NTB board is not supported.
|
||
|
|
ntb-unsupported: In this mode, NTB slot can be used as LT slot.
|
||
|
|
So one more LT can be supported in this mode. Therefore, NTB board will
|
||
|
|
not be supported. This mode is applicable for NFXS-B shelf only.
|
||
|
|
ntio-unsupported: In this mode, there is no NTIO; the slot can be
|
||
|
|
used for an LSM.
|
||
|
|
DEFAULTVALUE: The default Value of the eqptHolderMode depends
|
||
|
|
on the shelf type. In the case of ARAM-E, default will be ntio-unsupported.
|
||
|
|
All other shelves will default to ntbntio-supported mode.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: Yes DEFVALUE: See above UNITS: -"
|
||
|
|
::= { eqptHolderEntry 12 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptHolderSerialNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the serial number of the shelf.
|
||
|
|
|
||
|
|
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 13 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptHolderVariant OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the ALU code of the shelf.
|
||
|
|
|
||
|
|
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 14 }
|
||
|
|
|
||
|
|
eqptHolderICScode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the Item Change Status iteration
|
||
|
|
code of the shelf.
|
||
|
|
|
||
|
|
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptHolderEntry 15 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP HOLDER TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START BOARD TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptBoardTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptBoardEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table representing the slots of all planned shelves. Each slot
|
||
|
|
can hold a board of one of the following types: NT, EXT, LSM,
|
||
|
|
ACU, CTRL, applique.
|
||
|
|
|
||
|
|
This table has a row for each slot in each planned shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 3 }
|
||
|
|
|
||
|
|
eqptBoardEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptBoardEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the eqptBoardTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptSlotId }
|
||
|
|
::= { eqptBoardTable 1 }
|
||
|
|
|
||
|
|
EqptBoardEntry ::= SEQUENCE {
|
||
|
|
eqptSlotId EqptSlotIndex,
|
||
|
|
eqptSlotPlannedType DisplayString,
|
||
|
|
eqptSlotActualType DisplayString,
|
||
|
|
eqptSlotPowerStatus INTEGER,
|
||
|
|
eqptBoardAdminStatus INTEGER,
|
||
|
|
eqptBoardOperStatus INTEGER,
|
||
|
|
eqptBoardOperError INTEGER,
|
||
|
|
eqptBoardAvailStatus INTEGER,
|
||
|
|
eqptBoardRestart INTEGER,
|
||
|
|
eqptBoardSwOverruleStatus INTEGER,
|
||
|
|
eqptBoardContainerId INTEGER,
|
||
|
|
eqptBoardContainerOffset INTEGER,
|
||
|
|
eqptBoardInventoryAlcatelCompanyId DisplayString,
|
||
|
|
eqptBoardInventoryTypeName DisplayString,
|
||
|
|
eqptBoardInventoryPBACode DisplayString,
|
||
|
|
eqptBoardInventoryFPBACode DisplayString,
|
||
|
|
eqptBoardInventoryICScode DisplayString,
|
||
|
|
eqptBoardInventoryCLEICode DisplayString,
|
||
|
|
eqptBoardInventorySerialNumber DisplayString,
|
||
|
|
eqptBoardInventoryLastFailedTest OCTET STRING (SIZE(4)),
|
||
|
|
eqptSlotPlannedCapabilityProfile AsamProfilePointer,
|
||
|
|
eqptBoardCustAlarmProfile AsamProfilePointer,
|
||
|
|
eqptBoardLastRestartCause INTEGER,
|
||
|
|
eqptBoardLastRestartTime NetworkTimeInSeconds,
|
||
|
|
eqptBoardRestartNumberOfChanges Counter,
|
||
|
|
eqptBoardRelatedMgntEntityIPAddress IpAddress,
|
||
|
|
eqptBoardRelatedMgntEntityPairedNumber INTEGER,
|
||
|
|
eqptBoardDualHostIPAddress IpAddress,
|
||
|
|
eqptBoardDualHostLsmLocation EqptHolderIndexOrZero,
|
||
|
|
eqptBoardIfSlotId INTEGER,
|
||
|
|
eqptBoardRestartCountPerLt Counter,
|
||
|
|
eqptBoardClearRestartCountPerLt TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptSlotId OBJECT-TYPE
|
||
|
|
SYNTAX EqptSlotIndex
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value to identify a slot position.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 1 }
|
||
|
|
|
||
|
|
eqptSlotPlannedType OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
|
||
|
|
is planned in the slot. If the board is planned, the string consists
|
||
|
|
of a mnemonic that identifies the board-type.
|
||
|
|
|
||
|
|
Following mnemonics are valid:
|
||
|
|
|
||
|
|
<BOARD_MNEMONIC> A board of a specific type. Refer to the ETSI and
|
||
|
|
US Configurations documents for the list of boards
|
||
|
|
that are supported in a given release.
|
||
|
|
ODM board types are planned with the board mnemonic,
|
||
|
|
they are treated as unmanaged boards.
|
||
|
|
|
||
|
|
EXT_MANAGED The presence of the LT module can be detected but
|
||
|
|
it is not managed by this NT in the HYNT module.
|
||
|
|
The LT type must be planned on the other NT.
|
||
|
|
|
||
|
|
UNMANAGED Unmanaged board: this means that the presence of
|
||
|
|
the board can be detected and that the board can
|
||
|
|
be reset and powered-down but that it is not
|
||
|
|
possible to establish communication with the board
|
||
|
|
in software.
|
||
|
|
|
||
|
|
NOT_PLANNED No board is planned in the slot.
|
||
|
|
|
||
|
|
NOT_ALLOWED Slot planning is not allowed in this position.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -"
|
||
|
|
::= { eqptBoardEntry 2 }
|
||
|
|
|
||
|
|
eqptSlotActualType OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
|
||
|
|
is actually present in the slot.
|
||
|
|
|
||
|
|
Following values are possible:
|
||
|
|
|
||
|
|
<BOARD_MNEMONIC> Indicates the detected board-type. Uses same
|
||
|
|
mnemonics as described in object
|
||
|
|
eqptSlotPlannedType.
|
||
|
|
|
||
|
|
EMPTY No board plugged within this slot.
|
||
|
|
|
||
|
|
EXT_MANAGED The presence of the LT module can be detected but
|
||
|
|
it is not managed by this NT in the HYNT module.
|
||
|
|
The LT type must be planned on the other NT.
|
||
|
|
|
||
|
|
UNMANAGED The type of the detected board is unknown
|
||
|
|
and the planned board type is UNMANAGED or ODMboardtype.
|
||
|
|
|
||
|
|
UNKNOWN The type of the detected board is unknown
|
||
|
|
and the planned board type is not UNMANAGED
|
||
|
|
and the planned board type is not EXT_MANAGED.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 3 }
|
||
|
|
|
||
|
|
eqptSlotPowerStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
powerUp(1),
|
||
|
|
powerDown(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute is used by the operator to power-up or power-down
|
||
|
|
an LSM slot. This attribute is not supported for other type of slots.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
|
||
|
|
PERSIST: YES DEFVALUE: 1 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 4 }
|
||
|
|
|
||
|
|
eqptBoardAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unlock(1),
|
||
|
|
lock(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute is used by the operator to lock or unlock the board.
|
||
|
|
|
||
|
|
This attribute is only supported for the following type of boards:
|
||
|
|
NT (but notice that the system will refuse a request to lock the NT
|
||
|
|
of a simplex system), EXT and LSM (if managed). This attribute has
|
||
|
|
no meaning for an unmanaged or externally managed (EXT_MANAGED) LSM,
|
||
|
|
for an ACU, CTRL or for an applique. An exception is the NRCD-C, CTRL
|
||
|
|
board of the FD-REM, that has LT capabilities next to the regular
|
||
|
|
CTRL capabilities.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
|
||
|
|
PERSIST: YES DEFVALUE: 1 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 5 }
|
||
|
|
|
||
|
|
eqptBoardOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute informs the operator whether the plug-in unit is able
|
||
|
|
to perform its normal operation.
|
||
|
|
|
||
|
|
This attribute is supported for all type of boards: NT, EXT, LSM,
|
||
|
|
ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 6 }
|
||
|
|
|
||
|
|
eqptBoardOperError OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
no-error(1), -- no-error or admin state = Down
|
||
|
|
type-mismatch(2),
|
||
|
|
board-missing(3),
|
||
|
|
board-installation-missing(4),
|
||
|
|
no-planned-board(5),
|
||
|
|
waiting-for-sw(6),
|
||
|
|
init-boot-failed(7),
|
||
|
|
init-download-failed(8),
|
||
|
|
init-connection-failed(9),
|
||
|
|
init-configuration-failed(10),
|
||
|
|
board-reset-protection(11),
|
||
|
|
invalid-parameter(12),
|
||
|
|
temperature-alarm(13),
|
||
|
|
tempshutdown(14),
|
||
|
|
defense(15),
|
||
|
|
board-not-licensed(16),
|
||
|
|
sem-power-fail(17),
|
||
|
|
sem-ups-fail(18),
|
||
|
|
board-in-incompatible-slot(19),
|
||
|
|
download-ongoing(21),
|
||
|
|
unknown-error(255)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute describes for what reason the board is not operational.
|
||
|
|
These values correspond with the alarms which are generated in case of
|
||
|
|
a failure.
|
||
|
|
|
||
|
|
This attribute is supported for all type of boards: NT, EXT, LSM,
|
||
|
|
ACU, CTRL, applique.
|
||
|
|
Default value is no-error, replaced by result from startup sequence.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..15, 255
|
||
|
|
PERSIST: NO DEFVALUE: 1 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 7 }
|
||
|
|
|
||
|
|
eqptBoardAvailStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
available(1), -- board is available, after successfull selftest
|
||
|
|
inTest(2), -- during selftest or init, after reset or power up
|
||
|
|
failed(3), -- error, error in selftest or timeout
|
||
|
|
powerOff(4), -- board is powered off
|
||
|
|
notInstalled(5), -- board is not plugged in
|
||
|
|
offLine(6), -- board has been disabled
|
||
|
|
dependency(7) -- board cannot operate because some other resource
|
||
|
|
-- on which it depends is unavailable
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute provides further information regarding the state
|
||
|
|
of the board. It is set to available after a successfull selftest
|
||
|
|
of the board (if applicable).
|
||
|
|
|
||
|
|
This attribute is supported for all type of boards: NT, EXT, LSM,
|
||
|
|
ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 8 }
|
||
|
|
|
||
|
|
eqptBoardRestart OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
with-selftest(1),
|
||
|
|
without-selftest(2),
|
||
|
|
hot-restart(5),
|
||
|
|
initialValue (255)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Writing a valid value to this object will restart the board in the
|
||
|
|
specified mode.
|
||
|
|
|
||
|
|
This attribute is only supported for the following type of boards:
|
||
|
|
NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boards, only a
|
||
|
|
restart without selftest is supported. An exception is the NRCD-C,
|
||
|
|
FD-REM CTRL board, that has LT capabilities (restart with/without
|
||
|
|
selftest) next to the regular CTRL capabilities.
|
||
|
|
Contains previous restart reason, if not available it has value 255.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: 1, 2, 5, 255
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 9 }
|
||
|
|
|
||
|
|
eqptBoardSwOverruleStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
no-overrule(1),
|
||
|
|
overrule(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Used to overrule the default software version for this board.
|
||
|
|
This attribute is only supported for managed LSMs.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
|
||
|
|
PERSIST: NO DEFVALUE: 1 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 10 }
|
||
|
|
|
||
|
|
eqptBoardContainerId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute describes in which equipment holder the slot
|
||
|
|
is contained.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 11 }
|
||
|
|
|
||
|
|
eqptBoardContainerOffset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute describes the position of the slot in the
|
||
|
|
containing equipment holder.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 12 }
|
||
|
|
|
||
|
|
-- The following attributes are used to represent the board inventory data.
|
||
|
|
-- Board inventory data is retrieved for the following board-types: NT, EXT,
|
||
|
|
-- managed LSM, ACU, CTRL, applique.
|
||
|
|
-- Board inventory data is not retrieved for unmanaged ,externally managed
|
||
|
|
-- (EXT_MANAGED) LSMs and ODM boardtypes.
|
||
|
|
|
||
|
|
eqptBoardInventoryAlcatelCompanyId OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the company of the board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 13 }
|
||
|
|
|
||
|
|
eqptBoardInventoryTypeName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the name of the board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 14 }
|
||
|
|
|
||
|
|
eqptBoardInventoryPBACode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the Alcatel Printed Board Assembly
|
||
|
|
code of of the board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 15 }
|
||
|
|
|
||
|
|
eqptBoardInventoryFPBACode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the Alcatel Printed Board Assembly
|
||
|
|
code of the board, which also identifies the boot software.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 16 }
|
||
|
|
|
||
|
|
eqptBoardInventoryICScode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the Item Change Status iteration
|
||
|
|
code of the board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 17 }
|
||
|
|
|
||
|
|
eqptBoardInventoryCLEICode OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the (USA) Common Language Equipment
|
||
|
|
Identification code of the board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 18 }
|
||
|
|
|
||
|
|
eqptBoardInventorySerialNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute represents the serial number of the board.
|
||
|
|
|
||
|
|
Breakdown of a sample serial number is :
|
||
|
|
|
||
|
|
sample NANT-D serial number is AA1003ZA028
|
||
|
|
|
||
|
|
AA 10 03 ZA028
|
||
|
|
--- ==== ==========
|
||
|
|
| | |=====' Production Plant Code
|
||
|
|
| |
|
||
|
|
| |==============' Week
|
||
|
|
|
|
||
|
|
|====================' Year
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 19 }
|
||
|
|
|
||
|
|
eqptBoardInventoryLastFailedTest OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(4))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies the last failing test by means of 4 numbers, from MSB
|
||
|
|
to LSB:
|
||
|
|
- Table number (1 byte)
|
||
|
|
- Segment number (1 byte)
|
||
|
|
- Case number (1 byte)
|
||
|
|
- Check number (1 byte)
|
||
|
|
As long as there has been no failing selftest, the value of this
|
||
|
|
object will be 0.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptBoardEntry 20 }
|
||
|
|
|
||
|
|
eqptSlotPlannedCapabilityProfile OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfilePointer
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A pointer to the capability profile that will be used for this
|
||
|
|
slot. Capability profiles are only applicable for LT cards
|
||
|
|
that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards.
|
||
|
|
Planning the profile should always be done at the same moment the
|
||
|
|
LT/NTIO is planned.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 22 }
|
||
|
|
|
||
|
|
eqptBoardCustAlarmProfile OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfilePointer
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A pointer to the customizable alarms profile which will be
|
||
|
|
associated to NT for all shelves except FD-REM where the
|
||
|
|
customizable alarms profile will be associated to master LT.
|
||
|
|
In redundant NT shelves the profile will be associated to
|
||
|
|
both NTA and NTB while associating customizable alarms profile
|
||
|
|
to NTA or NTB.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 23 }
|
||
|
|
|
||
|
|
eqptBoardLastRestartCause OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
poweron(1),
|
||
|
|
unknown(2),
|
||
|
|
watchdog(3),
|
||
|
|
coldreset(4),
|
||
|
|
warmreset(5),
|
||
|
|
hotreset(6),
|
||
|
|
hotreload(7),
|
||
|
|
cleandata(8),
|
||
|
|
emergencybuild(9),
|
||
|
|
poweronreset(10),
|
||
|
|
commitfailure(11),
|
||
|
|
timezonemodified(12)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute gives the last restart cause for board.
|
||
|
|
Currently only LSM board can support. Considering future safe,
|
||
|
|
only use default value for other board entry.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: unknown UNITS: -"
|
||
|
|
::= { eqptBoardEntry 24 }
|
||
|
|
|
||
|
|
eqptBoardLastRestartTime OBJECT-TYPE
|
||
|
|
SYNTAX NetworkTimeInSeconds
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute gives the last restart time.
|
||
|
|
Currently only LSM board can support. Considering future safe,
|
||
|
|
only use default value for other board entry.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 25 }
|
||
|
|
|
||
|
|
eqptBoardRestartNumberOfChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the number of restart times.
|
||
|
|
This counter is incremented each time eqptBoardLastRestartTime
|
||
|
|
changes. Considering future safe, only use default value for
|
||
|
|
other board entry.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 26 }
|
||
|
|
|
||
|
|
eqptBoardRelatedMgntEntityIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Network address. It is a public OAM IP address related to xVPS. For
|
||
|
|
single OAM IP is introduced, multi-xVPS boards existing on a same shelf
|
||
|
|
may use one single OAM IP. This IP is configured on NT which manages
|
||
|
|
these xVPS boards.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE:
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 27 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptBoardRelatedMgntEntityPairedNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" For single OAM IP is introduced, one public OAM IP can not identify an
|
||
|
|
xVPS, so community string is introduced. Each active xVPS will have
|
||
|
|
different community string in one shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE:
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 28 }
|
||
|
|
|
||
|
|
eqptBoardDualHostIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Network address. Only applicable for FD REM connected to dual host.
|
||
|
|
It is the public OAM IP address of the host connecting the Lsm in this
|
||
|
|
externally managed slot. It is instantiated with default value and
|
||
|
|
can only be set when the planned type is EXT_MANAGED.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE:
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 29 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptBoardDualHostLsmLocation OBJECT-TYPE
|
||
|
|
SYNTAX EqptHolderIndexOrZero
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" Only applicable for FD REM connected to dual host.
|
||
|
|
It is the Rack/Shelf identifying the location of this
|
||
|
|
externally managed slot, within the scope of the host connecting
|
||
|
|
the Lsm. The slot component is implicitly present in the key.
|
||
|
|
It is instantiated with default value and can only be set when
|
||
|
|
the planned type is EXT_MANAGED. The type corresponds to the
|
||
|
|
type EqptHolderIndex, except for the fact that this field can
|
||
|
|
be 0, which is the default value.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptBoardEntry 30 }
|
||
|
|
|
||
|
|
eqptBoardIfSlotId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This object gives the slot's linear number, which could be
|
||
|
|
used by an external manager to help in mapping a given
|
||
|
|
IfIndex to a physical slot location. It is a numerical value
|
||
|
|
that consists of 6 bits. For a slot that does not carry any
|
||
|
|
interfaces (e.g. applique or NTIO slot), the value is always
|
||
|
|
'0xFF'.
|
||
|
|
Note that this linear slot number is persistent across system
|
||
|
|
restarts, i.e. the same linear slot number will be used for
|
||
|
|
the same slot even after a restart of the ISAM system.
|
||
|
|
However, it is not guaranteed that the same linear slot
|
||
|
|
number will used after a migration to a new release.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0xFF UNITS: -"
|
||
|
|
::= { eqptBoardEntry 32 }
|
||
|
|
|
||
|
|
eqptBoardRestartCountPerLt OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the number of restart times per LT.
|
||
|
|
This counter is incremented each time eqptBoardLastRestartTime
|
||
|
|
changes.This counter will reset to zero when LT replaced or unplanned.
|
||
|
|
|
||
|
|
Note:This counter is Per LT basis. LTs are distinguished based on serialNumber.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: NA"
|
||
|
|
::= { eqptBoardEntry 33 }
|
||
|
|
|
||
|
|
eqptBoardClearRestartCountPerLt OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is a button-like object to reset the eqptBoardRestartCountPerLt counter.
|
||
|
|
When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared.
|
||
|
|
|
||
|
|
A value set to false(2) or other is ignored..
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: FALSE UNITS: NA"
|
||
|
|
::= { eqptBoardEntry 34 }
|
||
|
|
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP BOARD TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START SHELF SUMMARY TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptShelfSummaryTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptShelfSummaryEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shelf summary table, summarizing slot or board related status
|
||
|
|
changes within each shelf.
|
||
|
|
|
||
|
|
This table has one row per planned shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above."
|
||
|
|
::= { asamEquipmentMIB 4 }
|
||
|
|
|
||
|
|
eqptShelfSummaryEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptShelfSummaryEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the shelf summary table.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptHolderId }
|
||
|
|
::= { eqptShelfSummaryTable 1 }
|
||
|
|
|
||
|
|
EqptShelfSummaryEntry ::= SEQUENCE {
|
||
|
|
eqptShelfHwNumberOfChanges Counter,
|
||
|
|
eqptShelfSlotSummaryOccupation OCTET STRING,
|
||
|
|
eqptShelfBoardSummaryAdmin OCTET STRING,
|
||
|
|
eqptShelfBoardSummaryAvail OCTET STRING,
|
||
|
|
eqptShelfBoardSummaryOper OCTET STRING,
|
||
|
|
eqptShelfBoardSummaryTypeMismatch OCTET STRING,
|
||
|
|
eqptShelfBoardSummaryAlarm OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptShelfHwNumberOfChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the number of configuration or
|
||
|
|
status changes for slots/boards within this shelf. This counter
|
||
|
|
is incremented each time any of the summary table objects of this
|
||
|
|
shelf changes.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 1 }
|
||
|
|
|
||
|
|
eqptShelfSlotSummaryOccupation OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Bitmap of the occupation of slots (0 = empty, 1 = full)
|
||
|
|
Applicable for NT, EXT, LSM, ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 2 }
|
||
|
|
|
||
|
|
eqptShelfBoardSummaryAdmin OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Bitmap of the administrative state of the boards
|
||
|
|
(0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 3 }
|
||
|
|
|
||
|
|
eqptShelfBoardSummaryAvail OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Bitmap of the availability state of the boards (0 = not available,
|
||
|
|
1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 4 }
|
||
|
|
|
||
|
|
eqptShelfBoardSummaryOper OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Bitmap of the operational state of the boards (0 = locked,
|
||
|
|
1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 5 }
|
||
|
|
|
||
|
|
eqptShelfBoardSummaryTypeMismatch OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Bitmap of the mismatch between the actual board-type and the planned
|
||
|
|
board-type (0 = mismatch, 1 = no mismatch).
|
||
|
|
Applicable for NT, EXT, LSM, ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 6 }
|
||
|
|
|
||
|
|
eqptShelfBoardSummaryAlarm OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Bitmap of the boards which generated an alarm (0 = alarm,
|
||
|
|
1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptShelfSummaryEntry 7 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP SHELF SUMMARY TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptProt OBJECT IDENTIFIER ::= { asamEquipmentMIB 5 }
|
||
|
|
|
||
|
|
eqptProtNextProtGroupId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains an appropriate value to be used for
|
||
|
|
eqptProtGroupId when creating entries in the eqptProtGroupTable.
|
||
|
|
The value 0 indicates that no unassigned entries are available.
|
||
|
|
After each retrieval, the agent will modify the value to the
|
||
|
|
next unassigned index.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= {eqptProt 1}
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START PROTECTIONGROUP TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptProtGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptProtGroupEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table representing groups of protected or protecting elements.
|
||
|
|
Only one row for NT protection group which will always be created and
|
||
|
|
cannot be deleted.
|
||
|
|
From ISAM R4.1.02 the default created NT protection group will be locked.
|
||
|
|
(before it was unlocked).
|
||
|
|
From R3.3 onwards, each LT protection group (comprised of 2 adjacent
|
||
|
|
slots LT n and LT n+1, where n is a odd number), also has a row.
|
||
|
|
The protection groups are created by default even though
|
||
|
|
the protection groups are not used.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above "
|
||
|
|
::= { eqptProt 2 }
|
||
|
|
|
||
|
|
eqptProtGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptProtGroupEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the eqptProtGroupTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptProtGroupId }
|
||
|
|
::= { eqptProtGroupTable 1 }
|
||
|
|
|
||
|
|
EqptProtGroupEntry ::= SEQUENCE {
|
||
|
|
eqptProtGroupId INTEGER,
|
||
|
|
eqptProtGroupType INTEGER,
|
||
|
|
eqptProtGroupNumberOfChanges Counter,
|
||
|
|
eqptProtGroupSwitchoverCount Counter,
|
||
|
|
eqptProtGroupLastSwitchoverReason INTEGER,
|
||
|
|
eqptProtGroupEpsQuenchfactor TimeTicks,
|
||
|
|
eqptProtGroupAlarmBitmap INTEGER,
|
||
|
|
eqptProtGroupAdminStatus INTEGER,
|
||
|
|
eqptProtGroupAdminProtElement INTEGER,
|
||
|
|
eqptProtGroupOperProtElement INTEGER,
|
||
|
|
eqptProtGroupRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptProtGroupId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value to identify a protection group.
|
||
|
|
The value 1 is reserved for the NT protection group,
|
||
|
|
which is always present and cannot be deleted.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 1}
|
||
|
|
|
||
|
|
eqptProtGroupType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
one-plus-one(1),
|
||
|
|
one-for-N(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attributes distinguishes between 1+1 and 1:N protection groups.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
|
||
|
|
PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 2 }
|
||
|
|
|
||
|
|
eqptProtGroupNumberOfChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter which indicates the number of status changes
|
||
|
|
in this protection group as well as the status changes for the
|
||
|
|
protecting elements within this group:
|
||
|
|
eqptProtGroupSwitchoverCount;
|
||
|
|
eqptProtGroupLastSwitchoverReason;
|
||
|
|
eqptProtGroupAlarmBitmap;
|
||
|
|
eqptProtElementStandbyStatus.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 3 }
|
||
|
|
|
||
|
|
eqptProtGroupSwitchoverCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Wrap around counter for the number of switchovers being performed.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 4 }
|
||
|
|
|
||
|
|
eqptProtGroupLastSwitchoverReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noSwitchOver(1), -- no switch over has been performed yet
|
||
|
|
forcedActive(2), -- chain is forced active
|
||
|
|
boardNotPresent(3), -- board is removed or not reachable
|
||
|
|
extenderChainFailure(4), -- extender chain failure
|
||
|
|
linkFailure(5), -- link failure
|
||
|
|
watchDogTimeOut(6), -- redundancy watchdog
|
||
|
|
fileSystemCorrupt(7), -- curruption of file system
|
||
|
|
configurationMismatch(8), -- mismatch in boardType or Swversion
|
||
|
|
boardUnplanned(9), -- board has been unplanned
|
||
|
|
boardLocked(10), -- board has been locked
|
||
|
|
shelfDefense(11), -- shelf-error detected by defense
|
||
|
|
revertiveSwitchOver(12), -- switchover because protected board is
|
||
|
|
-- operational again (in case of 1:N)
|
||
|
|
lanxFailure(13), -- lanx not alive
|
||
|
|
lanxHwFailure(14), -- active Lanx has detected a
|
||
|
|
-- hardware failure
|
||
|
|
lanxSdkFailure(15), -- active Lanx has detected a
|
||
|
|
-- SDK-failure
|
||
|
|
dpoeAppFailure(16), -- active DPoE has detected application failure
|
||
|
|
dpoeUnreachable(17) -- DPoE is not reachable
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains the reason of the last switch over.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 5 }
|
||
|
|
|
||
|
|
eqptProtGroupEpsQuenchfactor OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains a timervalue in 1/100 sec. The EpsQuench timer
|
||
|
|
is used to prevent continuous switch-overs in case of unstable EPS.
|
||
|
|
Value equal to zero means the quenching mechanism is disabled.
|
||
|
|
Configuration of the EPS quenchfactor has mainly be foreseen for
|
||
|
|
test purposes. Operators should preferably not be able to
|
||
|
|
reconfigure the default value.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 1440000 UNITS: 0.01 seconds"
|
||
|
|
DEFVAL { 1440000} -- 4 hours
|
||
|
|
::= { eqptProtGroupEntry 6 }
|
||
|
|
|
||
|
|
eqptProtGroupAlarmBitmap OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (1..4294967295)
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Status bitmap:
|
||
|
|
bit 0 set means No defect at all
|
||
|
|
bit 1 : if bit set, Standby degradation alarm is set
|
||
|
|
(excludes bit 0 setting)
|
||
|
|
bit 2 .. 31 : reserved for future extensions.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0x00000001 UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 7 }
|
||
|
|
|
||
|
|
eqptProtGroupAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unlock(1),
|
||
|
|
lock(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Used by the administrator to disable or enable protection within
|
||
|
|
that protection group.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
|
||
|
|
PERSIST: YES DEFVALUE: unlock(1) UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 8 }
|
||
|
|
|
||
|
|
eqptProtGroupAdminProtElement OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Only supported for 1:N protection groups. In case of a forced
|
||
|
|
switchover to the spare element, this attribute is used to specify
|
||
|
|
the element to be protected. The value 0 means that no element is
|
||
|
|
specified.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 9 }
|
||
|
|
|
||
|
|
eqptProtGroupOperProtElement OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Only supported for 1:N protection groups. Indicates which element
|
||
|
|
is currently protected by the spare element. The value 0 means that
|
||
|
|
currently the spare element is not protecting any element.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 10 }
|
||
|
|
|
||
|
|
eqptProtGroupRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Entries in the eqptProtGroupTable can only be created at once, by
|
||
|
|
specifying eqptProtGroupRowStatus=createAndGo(4).
|
||
|
|
For NT protection group, if all values are valid then the
|
||
|
|
entry is made active(1). For LT protection group, if the group
|
||
|
|
is in service then the entry is made active(1). If the group
|
||
|
|
is not in service then the entry is made notInService(2).
|
||
|
|
If the object is set to destroy(6), the entry is deleted.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: active(1) UNITS: -"
|
||
|
|
::= { eqptProtGroupEntry 11 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP PROTECTIONGROUP TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START PROTECTIONELEMENT TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptProtElementTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptProtElementEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table representing the protected or protecting elements.
|
||
|
|
An element can be either a board or an extension chain. Both are
|
||
|
|
identified by the corresponding slot identifier (extension chain
|
||
|
|
is identified by slot of corresponding NT board).
|
||
|
|
This table has only two rows from ISAM R2.2 to R3.2.
|
||
|
|
From R3.3 onwards, this table has a row for each slots in the
|
||
|
|
main shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above "
|
||
|
|
::= { eqptProt 3 }
|
||
|
|
|
||
|
|
eqptProtElementEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptProtElementEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the eqptProtElementTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptSlotId }
|
||
|
|
::= { eqptProtElementTable 1 }
|
||
|
|
|
||
|
|
EqptProtElementEntry ::= SEQUENCE {
|
||
|
|
eqptProtElementGroupId INTEGER,
|
||
|
|
eqptProtElementType INTEGER,
|
||
|
|
eqptProtElementStandbyStatus INTEGER,
|
||
|
|
eqptProtElementRedcyCtrlStatus INTEGER,
|
||
|
|
eqptProtElementRowStatus RowStatus,
|
||
|
|
eqptProtElementStandbyStatuschangeReason INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptProtElementGroupId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attributes identifies the protection group to which this
|
||
|
|
element belongs.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtElementEntry 1}
|
||
|
|
|
||
|
|
eqptProtElementType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normal(1),
|
||
|
|
spare(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute is used to distinguish between normal elements of
|
||
|
|
a protection group and the spare element of a 1:N protection group.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
|
||
|
|
PERSIST: YES DEFVALUE: normal(1) UNITS: -"
|
||
|
|
::= { eqptProtElementEntry 2}
|
||
|
|
|
||
|
|
eqptProtElementStandbyStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
providing-service(1), --active and providing service
|
||
|
|
hot-standby(2), --standby and ready to become active
|
||
|
|
cold-standby(3), --standby but not synchronized
|
||
|
|
idle(4) --not able to protect peer board
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute reflects the standby status of the protection
|
||
|
|
group element.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProtElementEntry 3}
|
||
|
|
|
||
|
|
eqptProtElementRedcyCtrlStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normal(1),
|
||
|
|
forced-active(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute is used to force a switchover between elements of
|
||
|
|
a protection group or to keep one of the elements active.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
|
||
|
|
PERSIST: YES DEFVALUE: normal(1) UNITS: -"
|
||
|
|
::= { eqptProtElementEntry 4}
|
||
|
|
|
||
|
|
eqptProtElementRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Entries in the eqptProtElementTable can only be created at once,
|
||
|
|
by specifying eqptProtEelementRowStatus=createAndGo(4). If all
|
||
|
|
values are valid then the entry is made active(1). If the object
|
||
|
|
is set to destroy(6), the entry is deleted.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: active(1) UNITS: -"
|
||
|
|
::= { eqptProtElementEntry 5}
|
||
|
|
|
||
|
|
eqptProtElementStandbyStatuschangeReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(0), -- standby state is hot standby
|
||
|
|
-- or not applicable (default value)
|
||
|
|
protectionGroupLocked(1), -- redundancy is not enabled
|
||
|
|
forcedActive(2), -- active board is put to forced active
|
||
|
|
peerLinkUnAvailable(3), -- standby NT link is not available
|
||
|
|
peerLocked(4), -- standby board is locked
|
||
|
|
peerNotPlanned(5), -- standby board is not planned
|
||
|
|
peerNotPluggedIn(6), -- standby board is not plugged in
|
||
|
|
databaseNotInSync(7), -- data base is not synchronized
|
||
|
|
lanxDynamicDataNotSynced(8), -- lanx has not synchronized its data
|
||
|
|
lanxSdkFailure(9), -- standby Lanx has detected a
|
||
|
|
-- non recoverable SDK-failure
|
||
|
|
lanxRecovSdkFailure(10), -- standby Lanx has deteced a
|
||
|
|
-- recoverable SDK-failure
|
||
|
|
lanxHwFailure(11), -- standby Lanx has deteced a hardware failure
|
||
|
|
lanxDynDataSyncFailure(12), -- standby lanx could not
|
||
|
|
-- synchronize its dynamic data
|
||
|
|
lanxStaticSyncFailure(13), -- standby lanx could not
|
||
|
|
-- synchronize its static data
|
||
|
|
lanxPeerCommFailure(14), -- standby Lanx has lost communication
|
||
|
|
-- with the active lanx
|
||
|
|
lanxFailure(15), -- standby lanx not alive
|
||
|
|
linkGroupNotAvailable(16), -- link group not available
|
||
|
|
ltNotEnabled(17), -- for LT redundancy : LT not enabled
|
||
|
|
lanxHiGigFailure(18), -- lanx (act or stb has detected a HiGiG
|
||
|
|
-- failure
|
||
|
|
lanxReconcileFailure(19), -- lanx has detected a failure in the
|
||
|
|
-- reconcile phase (a.k.a. bulk sync phase)
|
||
|
|
lanxDiscoveryFailure(20), -- act lanx is not able to detect the mate
|
||
|
|
-- although the HiGig is up and running.
|
||
|
|
dpoeAppFailure(21), -- standby DPoE has detected application
|
||
|
|
-- failure
|
||
|
|
dpoeCommFailure(22), -- standby DPoE has lost communication with
|
||
|
|
-- active DPoE
|
||
|
|
dpoeSyncFailure(23), -- standby DPoE could not do synchronization
|
||
|
|
-- with active DPoE
|
||
|
|
dpoeUnreachable(24) -- standby DPoE is not reachable
|
||
|
|
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute reflects the reason why the standby status of the protection group element has changed.
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0..24
|
||
|
|
PERSIST: NO DEFVALUE: none(0) UNITS: -"
|
||
|
|
::= { eqptProtElementEntry 6}
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP PROTECTIONELEMENT TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 6 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START PROFILE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptProfileTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptProfileEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table holding the mapping between the profileId and the corresponding
|
||
|
|
profile name.
|
||
|
|
This table has a row for every profile in the system.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { eqptProfile 1 }
|
||
|
|
|
||
|
|
eqptProfileEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptProfileEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the eqptProfileTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptProfileId }
|
||
|
|
::= { eqptProfileTable 1 }
|
||
|
|
|
||
|
|
EqptProfileEntry ::= SEQUENCE {
|
||
|
|
eqptProfileId AsamProfileIndex,
|
||
|
|
eqptProfileName AsamProfileName,
|
||
|
|
eqptProfileDescription DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptProfileId OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A value identifying a profile.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProfileEntry 1 }
|
||
|
|
|
||
|
|
eqptProfileName OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileName
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The corresponding name for a given profile id.
|
||
|
|
The name corresponding to the ProfileId must also be unique.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProfileEntry 2 }
|
||
|
|
|
||
|
|
eqptProfileDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A short description for the given profile, explaining the
|
||
|
|
key attributes.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProfileEntry 3 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP PROFILE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START PROFILE APPLICABILITY TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptProfileApplicabilityTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptProfileApplicabilityEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table lists for every defined profile in the system for
|
||
|
|
which boards it is applicable.
|
||
|
|
One profile can be applicable for multiple board types.
|
||
|
|
Multiple profiles can be applicable for the same board type.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { eqptProfile 2 }
|
||
|
|
|
||
|
|
eqptProfileApplicabilityEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptProfileApplicabilityEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the eqptProfileApplicabilityTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptProfileId, eqptBoardType }
|
||
|
|
::= { eqptProfileApplicabilityTable 1 }
|
||
|
|
|
||
|
|
EqptProfileApplicabilityEntry ::= SEQUENCE {
|
||
|
|
eqptBoardType DisplayString,
|
||
|
|
eqptDefaultProfile TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
eqptBoardType OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A string representing the board for which the profile is applicable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProfileApplicabilityEntry 1 }
|
||
|
|
|
||
|
|
eqptDefaultProfile OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A flag indicating if this is the default profile for a specific
|
||
|
|
board type.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptProfileApplicabilityEntry 2 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP PROFILE APPLICABILITY TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptTestChainTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptTestChainEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table contains the test chain configuration indicating
|
||
|
|
which shelf is connected to the TAP_UP or whether an external
|
||
|
|
test head is connected to the TAP_UP. This table has one row
|
||
|
|
for each planned shelf.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 7 }
|
||
|
|
|
||
|
|
eqptTestChainEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptTestChainEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the eqptTestChainTable."
|
||
|
|
|
||
|
|
INDEX { eqptHolderId }
|
||
|
|
::= { eqptTestChainTable 1 }
|
||
|
|
|
||
|
|
EqptTestChainEntry ::= SEQUENCE {
|
||
|
|
eqptTestChainShelfToTapUp INTEGER,
|
||
|
|
eqptTestChainExtTestHeadToTapUp INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptTestChainShelfToTapUp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (0..255)
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value to identify a shelf position which is connected
|
||
|
|
to the TAP_UP. The value '0' (default value) indicates that it
|
||
|
|
is not connected. This parameter is used if
|
||
|
|
eqptTestChainExtTestHeadToTapUp is set to '1' (i.e., 'no') and
|
||
|
|
is ignored if eqptTestChainExtTestHeadToTapUp is set to '2'
|
||
|
|
(i.e., 'yes').
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES
|
||
|
|
RANGE: DEP / 0 plus the range of eqptHolderId of the shelves.
|
||
|
|
DEFVALUE: 0 / this means that no shelf is configured to be
|
||
|
|
connected to the TAP_UP.
|
||
|
|
UNITS: NA SPARSE: NO DESCR: NA
|
||
|
|
"
|
||
|
|
::= { eqptTestChainEntry 1 }
|
||
|
|
|
||
|
|
eqptTestChainExtTestHeadToTapUp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
no (1),
|
||
|
|
yes (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This parameter is used to indicate whether an external test
|
||
|
|
head is connected to the TAP_UP.
|
||
|
|
no (1): no external test head is connected to the TAP_UP.
|
||
|
|
yes (2): an external test head is connected to the TAP_UP.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
ACCESS: NA USAGE: OPT PERSIST: YES
|
||
|
|
INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1
|
||
|
|
UNITS: NA SPARSE: NO DESCR: NA
|
||
|
|
"
|
||
|
|
::= { eqptTestChainEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptCustAlarmProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 8 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START CUSTOMIZABLE ALARMS PROFILE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptCustAlarmProfileIndexNext OBJECT-TYPE
|
||
|
|
SYNTAX AsamNextProfileIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object contains an appropriate value to be used for
|
||
|
|
eqptCustAlarmProfileIndex
|
||
|
|
when creating entries in the associated profile table.
|
||
|
|
The value 0 indicates that no unassigned entries are
|
||
|
|
available. To obtain the profile index value for a new
|
||
|
|
entry, the manager issues a management protocol retrieval
|
||
|
|
operation to obtain the current value of this object.
|
||
|
|
After each retrieval, the agent should modify the value to
|
||
|
|
the next unassigned index."
|
||
|
|
::= { eqptCustAlarmProfile 1 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptCustAlarmProfileTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptCustAlarmProfileEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table representing the configurable attributes of the customizable
|
||
|
|
alarms : a description, and the corresponding Alarm Outputs to be
|
||
|
|
activated when this alarm occurs.
|
||
|
|
|
||
|
|
This table has a row for each external alarms profile. It offers data
|
||
|
|
for a maximum of 5 external alarms. Alarms that are not defined for
|
||
|
|
a particular profile, need to contain default values in the fields
|
||
|
|
corresponding to that alarm number. Independent of the alarm number,
|
||
|
|
the name of the profile is also present, as well as the row status.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { eqptCustAlarmProfile 2}
|
||
|
|
|
||
|
|
eqptCustAlarmProfileEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the eqptCustAlarmProfileTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptCustAlarmProfileIndex }
|
||
|
|
::= { eqptCustAlarmProfileTable 1 }
|
||
|
|
|
||
|
|
EqptCustAlarmProfileEntry ::= SEQUENCE {
|
||
|
|
eqptCustAlarmProfileIndex AsamProfileIndex,
|
||
|
|
eqptCustAlarmProfileName AsamProfileName,
|
||
|
|
eqptCustAlarmProfileUsedStatus AsamProfileRefCount,
|
||
|
|
eqptCustAlarmProfileRowStatus RowStatus,
|
||
|
|
eqptCustAlarmProfileMnemonic1 DisplayString,
|
||
|
|
eqptCustAlarmProfileDescription1 DisplayString,
|
||
|
|
eqptCustAlarmProfileVisibleOutput1 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfileAudibleOutput1 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfilePolarity1 EqptCustAlarmProfilePolarityType,
|
||
|
|
eqptCustAlarmProfileSeverity1 AsamAlarmSeverityType,
|
||
|
|
eqptCustAlarmProfileMnemonic2 DisplayString,
|
||
|
|
eqptCustAlarmProfileDescription2 DisplayString,
|
||
|
|
eqptCustAlarmProfileVisibleOutput2 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfileAudibleOutput2 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfilePolarity2 EqptCustAlarmProfilePolarityType,
|
||
|
|
eqptCustAlarmProfileSeverity2 AsamAlarmSeverityType,
|
||
|
|
eqptCustAlarmProfileMnemonic3 DisplayString,
|
||
|
|
eqptCustAlarmProfileDescription3 DisplayString,
|
||
|
|
eqptCustAlarmProfileVisibleOutput3 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfileAudibleOutput3 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfilePolarity3 EqptCustAlarmProfilePolarityType,
|
||
|
|
eqptCustAlarmProfileSeverity3 AsamAlarmSeverityType,
|
||
|
|
eqptCustAlarmProfileMnemonic4 DisplayString,
|
||
|
|
eqptCustAlarmProfileDescription4 DisplayString,
|
||
|
|
eqptCustAlarmProfileVisibleOutput4 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfileAudibleOutput4 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfilePolarity4 EqptCustAlarmProfilePolarityType,
|
||
|
|
eqptCustAlarmProfileSeverity4 AsamAlarmSeverityType,
|
||
|
|
eqptCustAlarmProfileMnemonic5 DisplayString,
|
||
|
|
eqptCustAlarmProfileDescription5 DisplayString,
|
||
|
|
eqptCustAlarmProfileVisibleOutput5 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfileAudibleOutput5 EqptCustAlarmProfileOutputType,
|
||
|
|
eqptCustAlarmProfilePolarity5 EqptCustAlarmProfilePolarityType,
|
||
|
|
eqptCustAlarmProfileSeverity5 AsamAlarmSeverityType
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptCustAlarmProfileIndex OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Customizale Alarms Profile Index.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 1 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileName OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileName
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A textual name uniquely identifying this profile.
|
||
|
|
|
||
|
|
Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 2 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileUsedStatus OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileRefCount
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of entities using this profile. If the
|
||
|
|
reference count is greater than 0, then this profile is 'in use',
|
||
|
|
and may NOT be deleted. If the value is 0, then this profile is
|
||
|
|
'not in use', and can be deleted.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 3 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Entries in the eqptCustAlarmProfileTable can only be created at
|
||
|
|
once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4).
|
||
|
|
If all values are valid then the entry is made active(1). If the
|
||
|
|
object is set to destroy(6), the entry is deleted.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: active(1) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 4 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMnemonic1 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The mnemonic of the customizable alarm, for given Profile Index,
|
||
|
|
for external alarm number 1.
|
||
|
|
|
||
|
|
Maximum length is 16, allowed characters A-Z.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 5 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileDescription1 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..40))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The description of the customizable alarm, for given
|
||
|
|
Profile Index, for external alarm number 1.
|
||
|
|
|
||
|
|
Maximum length is 40.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 6 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileVisibleOutput1 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the visible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 1.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 7 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileAudibleOutput1 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the audible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 1.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 8 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfilePolarity1 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfilePolarityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether the alarm polarity is normal or inversed,
|
||
|
|
for given Profile Index, for external alarm number 1.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 9 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileSeverity1 OBJECT-TYPE
|
||
|
|
SYNTAX AsamAlarmSeverityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the severity of the alarm,
|
||
|
|
for given Profile Index, for external alarm number 1.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
|
||
|
|
PERSIST: YES DEFVALUE: major(4) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 10 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMnemonic2 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The mnemonic of the customizable alarm, for given Profile Index,
|
||
|
|
for external alarm number 2.
|
||
|
|
|
||
|
|
Maximum length is 16, allowed characters A-Z.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 11 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileDescription2 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..40))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The description of the customizable alarm, for given
|
||
|
|
Profile Index, for external alarm number 2.
|
||
|
|
|
||
|
|
Maximum length is 40.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 12 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileVisibleOutput2 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the visible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 2.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 13 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileAudibleOutput2 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the audible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 2.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 14 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfilePolarity2 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfilePolarityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether the alarm polarity is normal or inversed,
|
||
|
|
for given Profile Index, for external alarm number 2.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: normal(2), UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 15 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileSeverity2 OBJECT-TYPE
|
||
|
|
SYNTAX AsamAlarmSeverityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the severity of the alarm,
|
||
|
|
for given Profile Index, for external alarm number 2.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
|
||
|
|
PERSIST: YES DEFVALUE: major(4) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 16 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMnemonic3 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The mnemonic of the customizable alarm, for given Profile Index,
|
||
|
|
for external alarm number 3.
|
||
|
|
|
||
|
|
Maximum length is 16, allowed characters A-Z.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 17 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileDescription3 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..40))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The description of the customizable alarm, for given
|
||
|
|
Profile Index, for external alarm number 3.
|
||
|
|
|
||
|
|
Maximum length is 40.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 18 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileVisibleOutput3 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the visible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 3.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 19 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileAudibleOutput3 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the audible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 3.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 20 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfilePolarity3 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfilePolarityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether the alarm polarity is normal or inversed,
|
||
|
|
for given Profile Index, for external alarm number 3.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 21 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileSeverity3 OBJECT-TYPE
|
||
|
|
SYNTAX AsamAlarmSeverityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the severity of the alarm,
|
||
|
|
for given Profile Index, for external alarm number 3.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
|
||
|
|
PERSIST: YES DEFVALUE: major(4) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 22 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMnemonic4 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The mnemonic of the customizable alarm, for given Profile Index,
|
||
|
|
for external alarm number 4.
|
||
|
|
|
||
|
|
Maximum length is 16, allowed characters A-Z.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 23 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileDescription4 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..40))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The description of the customizable alarm, for given
|
||
|
|
Profile Index, for external alarm number 4.
|
||
|
|
|
||
|
|
Maximum length is 40.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 24 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileVisibleOutput4 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the visible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 4.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 25 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileAudibleOutput4 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the audible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 4.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 26 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfilePolarity4 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfilePolarityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether the alarm polarity is normal or inversed,
|
||
|
|
for given Profile Index, for external alarm number 4.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 27 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileSeverity4 OBJECT-TYPE
|
||
|
|
SYNTAX AsamAlarmSeverityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the severity of the alarm,
|
||
|
|
for given Profile Index, for external alarm number 4.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
|
||
|
|
PERSIST: YES DEFVALUE: major(4) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 28 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMnemonic5 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..16))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The mnemonic of the customizable alarm, for given Profile Index,
|
||
|
|
for external alarm number 5.
|
||
|
|
|
||
|
|
Maximum length is 16, allowed characters A-Z.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 29 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileDescription5 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..40))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The description of the customizable alarm, for given
|
||
|
|
Profile Index, for external alarm number 5.
|
||
|
|
|
||
|
|
Maximum length is 40.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 30 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileVisibleOutput5 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the visible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 5.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 31 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileAudibleOutput5 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileOutputType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether or not to trigger the audible alarm output,
|
||
|
|
for given Profile Index, for external alarm number 5.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 32 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfilePolarity5 OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfilePolarityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows whether the alarm polarity is normal or inversed,
|
||
|
|
for given Profile Index, for external alarm number 5.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 33 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileSeverity5 OBJECT-TYPE
|
||
|
|
SYNTAX AsamAlarmSeverityType
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Shows the severity of the alarm,
|
||
|
|
for given Profile Index, for external alarm number 5.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
|
||
|
|
PERSIST: YES DEFVALUE: major(4) UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileEntry 34 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP CUSTOMIZABLE ALARMS PROFILE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMappingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptCustAlarmProfileMappingEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The table listing the profile name to profile Index
|
||
|
|
Mapping."
|
||
|
|
::= { eqptCustAlarmProfile 3}
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMappingEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptCustAlarmProfileMappingEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry (conceptual row) representing the Customizable Alarm Profile
|
||
|
|
Name to Index mapping. The system automatically creates an entry in
|
||
|
|
this table for each corresponding entry (custAlarm-profile) created
|
||
|
|
in the eqptCustAlarmProfileTable. Similarly, when a profile is
|
||
|
|
deleted, the corresponding entry in this table is also automatically
|
||
|
|
deleted by the system."
|
||
|
|
INDEX {eqptCustAlarmProfileMappingName }
|
||
|
|
::= {eqptCustAlarmProfileMappingTable 1}
|
||
|
|
|
||
|
|
EqptCustAlarmProfileMappingEntry ::= SEQUENCE {
|
||
|
|
eqptCustAlarmProfileMappingName AsamProfileName,
|
||
|
|
eqptCustAlarmProfileMappingIndex AsamProfileIndex
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMappingName OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileName
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A textual name uniquely identifying this profile.
|
||
|
|
This name has to be unique within the assigned scope.
|
||
|
|
|
||
|
|
Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileMappingEntry 1 }
|
||
|
|
|
||
|
|
eqptCustAlarmProfileMappingIndex OBJECT-TYPE
|
||
|
|
SYNTAX AsamProfileIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Customizale Alarms Profile Index.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
|
||
|
|
PERSIST: YES DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptCustAlarmProfileMappingEntry 2 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START MTA FIELD |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptMtaTest OBJECT IDENTIFIER ::= { asamEquipmentMIB 9 }
|
||
|
|
eqptMtaTestHeadType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
four-wire(1),
|
||
|
|
two-wire(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"setting the MTA test head type, four-wire mode or two-wire mode.
|
||
|
|
This object should be consistent with external test head equipment,
|
||
|
|
MTA subsystem will operate different relays based on this object.
|
||
|
|
MTA commands will have differentiation between these two mode.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
ACCESS: NA USAGE: OPT PERSIST: YES
|
||
|
|
INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1
|
||
|
|
UNITS: NA SPARSE: NO DESCR: NA"
|
||
|
|
::= { eqptMtaTest 1 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP MTA FIELD |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START BOARD THERMAL SENSOR TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
eqptBoardThermalSensorTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptBoardThermalSensorEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table representing the actual value and thresholds of Thermal Sensor(s) on boards.
|
||
|
|
One entry corresponds to each sensor on board.
|
||
|
|
The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 10 }
|
||
|
|
|
||
|
|
eqptBoardThermalSensorEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptBoardThermalSensorEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment thermal sensor table on boards
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX {eqptSlotId, eqptBoardThermalSensorId}
|
||
|
|
::= {eqptBoardThermalSensorTable 1}
|
||
|
|
|
||
|
|
EqptBoardThermalSensorEntry ::= SEQUENCE{
|
||
|
|
eqptBoardThermalSensorId INTEGER,
|
||
|
|
eqptBoardThermalSensorActualTemperature INTEGER,
|
||
|
|
eqptBoardThermalSensorTcaThresholdLow INTEGER,
|
||
|
|
eqptBoardThermalSensorTcaThresholdHigh INTEGER,
|
||
|
|
eqptBoardThermalSensorShutdownThresholdLow INTEGER,
|
||
|
|
eqptBoardThermalSensorShutdownThresholdHigh INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptBoardThermalSensorId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index of thermal sensors on board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..15
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptBoardThermalSensorEntry 1}
|
||
|
|
|
||
|
|
eqptBoardThermalSensorActualTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Actual Temperature value read from thermal sensor on board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: -40..150
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
|
||
|
|
::={ eqptBoardThermalSensorEntry 2}
|
||
|
|
|
||
|
|
eqptBoardThermalSensorTcaThresholdLow OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Low Tca threshold of thermal sensor on Board
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
|
||
|
|
::= { eqptBoardThermalSensorEntry 3}
|
||
|
|
|
||
|
|
eqptBoardThermalSensorTcaThresholdHigh OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"High Tca threshold of thermal sensor on Board
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
|
||
|
|
::={ eqptBoardThermalSensorEntry 4}
|
||
|
|
|
||
|
|
eqptBoardThermalSensorShutdownThresholdLow OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Low Shutdown threshold of thermal sensor on Board
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
|
||
|
|
::={ eqptBoardThermalSensorEntry 5}
|
||
|
|
|
||
|
|
eqptBoardThermalSensorShutdownThresholdHigh OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"High Shutdown threshold of thermal sensor on Board
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
|
||
|
|
::={ eqptBoardThermalSensorEntry 6}
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP BOARD THERMAL SENSOR TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START PORTMAPPING TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
|
||
|
|
eqptPortMappingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPortMappingEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Equipment PortMapping table, showing the mapping between logical ports
|
||
|
|
and physical ports (faceplate numbering).
|
||
|
|
|
||
|
|
This table contains one row per logical port on the xHUB.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 13 }
|
||
|
|
|
||
|
|
eqptPortMappingEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPortMappingEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment PortMapping table.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptPortMappingLogPortNbr }
|
||
|
|
::= { eqptPortMappingTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
EqptPortMappingEntry ::= SEQUENCE {
|
||
|
|
eqptPortMappingLogPortNbr EqptPortMappingIndex,
|
||
|
|
eqptPortMappingLogPortType INTEGER,
|
||
|
|
eqptPortMappingPhyPortSlot EqptSlotIndex,
|
||
|
|
eqptPortMappingPhyPortType INTEGER,
|
||
|
|
eqptPortMappingPhyPortNbr INTEGER,
|
||
|
|
eqptPortMappingLSMSlot EqptSlotIndex,
|
||
|
|
eqptPortMappingChanges Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPortMappingLogPortNbr OBJECT-TYPE
|
||
|
|
SYNTAX EqptPortMappingIndex
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index in equipment PortMapping Table: corresponds to the logical
|
||
|
|
port id on the xHUB.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 1 }
|
||
|
|
|
||
|
|
eqptPortMappingLogPortType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
uplink (1), --
|
||
|
|
downlink (2), --
|
||
|
|
hostlink (3), --
|
||
|
|
internal (4) --
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The logical port type corresponds to the link classification.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 2 }
|
||
|
|
|
||
|
|
eqptPortMappingPhyPortSlot OBJECT-TYPE
|
||
|
|
SYNTAX EqptSlotIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The equipment slot index of the physical port.
|
||
|
|
This slot will point to either a NT or NTIO slot position.
|
||
|
|
|
||
|
|
This field is not applicable for hostlinks or internal, in which case it gets
|
||
|
|
the value 0xFFFF
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 3 }
|
||
|
|
|
||
|
|
eqptPortMappingPhyPortType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
not-applicable(1),
|
||
|
|
sfp(2),
|
||
|
|
xfp(3),
|
||
|
|
vp(5),
|
||
|
|
eth(10),
|
||
|
|
mcast(11),
|
||
|
|
ai(12),
|
||
|
|
ieee(13),
|
||
|
|
cfp(14)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The physcial port type.
|
||
|
|
|
||
|
|
This field is not applicable for hostlinks.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 4 }
|
||
|
|
|
||
|
|
eqptPortMappingPhyPortNbr OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The pysical port number, which corresponds to the faceplate number
|
||
|
|
of the sfp/xfp port.
|
||
|
|
|
||
|
|
This field is not applicable for hostlinks or internal, in which case it gets
|
||
|
|
the value 0xFF.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 5 }
|
||
|
|
|
||
|
|
eqptPortMappingLSMSlot OBJECT-TYPE
|
||
|
|
SYNTAX EqptSlotIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The equipment slot index of the corresponding LSM slot.
|
||
|
|
|
||
|
|
This field is only applicable for hostlinks, and downlinks to which
|
||
|
|
a remote LSM slot is assigned. In other cases it gets the value
|
||
|
|
0xFFFF.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 6 }
|
||
|
|
|
||
|
|
eqptPortMappingChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX.
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { eqptPortMappingEntry 7}
|
||
|
|
|
||
|
|
eqptPortMappingGlobalChangeCounter OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX.
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: -"
|
||
|
|
::= { asamEquipmentMIB 14 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP PORTMAPPING TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START ANY-TO-ANY PORTPROTECTION TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptPortProtectionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPortProtectionEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table holds the port protection groups"
|
||
|
|
::= { asamEquipmentMIB 15 }
|
||
|
|
|
||
|
|
eqptPortProtectionEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPortProtectionEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This entry represents a protection group which consists of two
|
||
|
|
ports. These two ports can be on the same LT board, or on
|
||
|
|
different LT's."
|
||
|
|
INDEX { eqptPortProtectionPortId }
|
||
|
|
::= { eqptPortProtectionTable 1 }
|
||
|
|
|
||
|
|
EqptPortProtectionEntry ::= SEQUENCE {
|
||
|
|
eqptPortProtectionPortId InterfaceIndex,
|
||
|
|
eqptPortProtectionRowStatus RowStatus,
|
||
|
|
eqptPortProtectionPairedPortId InterfaceIndex,
|
||
|
|
eqptPortProtectionPortStatus INTEGER,
|
||
|
|
eqptPortProtectionPairedPortStatus INTEGER,
|
||
|
|
eqptPortProtectionSwitchCommand InterfaceIndex,
|
||
|
|
eqptPortProtectionLastSwitchReason INTEGER,
|
||
|
|
eqptPortProtectionNumberOfSwitchovers INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPortProtectionPortId OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each row is indexed by the IfIndex of the
|
||
|
|
primary port of the protection group, the one which
|
||
|
|
is protected.
|
||
|
|
Only PON ports can be selected."
|
||
|
|
::= { eqptPortProtectionEntry 1 }
|
||
|
|
|
||
|
|
eqptPortProtectionRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"All rows instantiated using 'create-and-go' to
|
||
|
|
mate 2 ports in a protection group. Set to 'destroy' to
|
||
|
|
eliminate the protection group.
|
||
|
|
|
||
|
|
RULE 1 - Cannot create a protection group on an LT card
|
||
|
|
that doesn't support any-to-any redundancy.
|
||
|
|
|
||
|
|
RULE 2 - Cannot mate two ports in a protection group if
|
||
|
|
the paired port has already one or more
|
||
|
|
interface(s) defined on top of the physical link
|
||
|
|
interface.
|
||
|
|
|
||
|
|
RULE 3 - Cannot delete a protection group if paired
|
||
|
|
port is Admin UP."
|
||
|
|
::= { eqptPortProtectionEntry 2 }
|
||
|
|
|
||
|
|
eqptPortProtectionPairedPortId OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute represents the IfIndex of the paired
|
||
|
|
port. Only PON ports can be selected.
|
||
|
|
|
||
|
|
Must satisfy the following VALIDATIONs (otherwise OLT
|
||
|
|
should reject):
|
||
|
|
1) IfIndex must represent a real port.
|
||
|
|
2) PON cannot have any provisioned (planned) ONTs.
|
||
|
|
3) Cannot mate a PON with itself.
|
||
|
|
4) Cannot mate with a PON that is already mated in a
|
||
|
|
protection scheme."
|
||
|
|
::= { eqptPortProtectionEntry 3 }
|
||
|
|
|
||
|
|
eqptPortProtectionPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute represents the status of the primary port.
|
||
|
|
|
||
|
|
Following DEFINITIONS apply:
|
||
|
|
Active - means the port is used for transmission.
|
||
|
|
Inactive - means the system is NOT using the port for
|
||
|
|
transmission.
|
||
|
|
Up - means the port is capable of being used for
|
||
|
|
transmission/reception.
|
||
|
|
Down - means the port is NOT capable of being used for
|
||
|
|
transmission/reception (this includes a port that is
|
||
|
|
ADMIN down as well as a port that is down due to an
|
||
|
|
operational fault).
|
||
|
|
|
||
|
|
Enumerations are as follows:
|
||
|
|
|
||
|
|
1 = Active Up
|
||
|
|
2 = Active Down
|
||
|
|
3 = Inactive Up
|
||
|
|
4 = Inactive Down"
|
||
|
|
::= { eqptPortProtectionEntry 4 }
|
||
|
|
|
||
|
|
eqptPortProtectionPairedPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute represents the status of the paired
|
||
|
|
port.
|
||
|
|
|
||
|
|
Following DEFINITIONS apply:
|
||
|
|
Active - means the port is used for transmission.
|
||
|
|
Inactive - means the system is NOT using the port for
|
||
|
|
transmission.
|
||
|
|
Up - means the port is capable of being used for
|
||
|
|
transmission/reception.
|
||
|
|
Down - means the port is NOT capable of being used for
|
||
|
|
transmission/reception (this includes a port that is
|
||
|
|
ADMIN down as well as a port that is down due to an
|
||
|
|
operational fault).
|
||
|
|
|
||
|
|
Enumerations are as follows:
|
||
|
|
|
||
|
|
1 = Active Up
|
||
|
|
2 = Active Down
|
||
|
|
3 = Inactive Up
|
||
|
|
4 = Inactive Down"
|
||
|
|
::= { eqptPortProtectionEntry 5 }
|
||
|
|
|
||
|
|
eqptPortProtectionSwitchCommand OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
ACCESS write-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute represents the IfIndex of the desired port
|
||
|
|
to switch over to.
|
||
|
|
|
||
|
|
Must satisfy the following VALIDATIONs (otherwise OLT
|
||
|
|
should reject):
|
||
|
|
1) IfIndex must represent a real port.
|
||
|
|
2) IfIndex must be part of a protection group.
|
||
|
|
3) IfIndex must be either the primary or the paired port
|
||
|
|
of the protection group on which the switchover is
|
||
|
|
triggered."
|
||
|
|
::= { eqptPortProtectionEntry 6 }
|
||
|
|
|
||
|
|
eqptPortProtectionLastSwitchReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute contains the reason for the last port
|
||
|
|
switchover (if any).
|
||
|
|
|
||
|
|
0 = No switch has occurred (since last LT startup).
|
||
|
|
1 = Manual switch due to port Admin State change.
|
||
|
|
2 = Manual switch due to usage of Switch command.
|
||
|
|
3 = Automatic switch due to system determination.
|
||
|
|
4 = Automatic switch due to LT failure."
|
||
|
|
::= { eqptPortProtectionEntry 7 }
|
||
|
|
|
||
|
|
eqptPortProtectionNumberOfSwitchovers OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute contains the number of switchovers since
|
||
|
|
last LT startup."
|
||
|
|
::= { eqptPortProtectionEntry 8 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP ANY-TO-ANY PORTPROTECTION TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START ANY-TO-ANY PORTPROTECTION LOOKUP TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptPortProtectionLookupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPortProtectionLookupEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table holds the lookup port protection groups"
|
||
|
|
::= { asamEquipmentMIB 16 }
|
||
|
|
|
||
|
|
eqptPortProtectionLookupEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPortProtectionLookupEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This entry represents a lookup protection group which consists
|
||
|
|
of two ports. The key is either a primary or a paired port
|
||
|
|
in the eqptPortProtectionTable."
|
||
|
|
INDEX { eqptPortProtectionLookupPortId }
|
||
|
|
::= { eqptPortProtectionLookupTable 1 }
|
||
|
|
|
||
|
|
EqptPortProtectionLookupEntry ::= SEQUENCE {
|
||
|
|
eqptPortProtectionLookupPortId InterfaceIndex,
|
||
|
|
eqptPortProtectionLookupPrimaryPortId InterfaceIndex
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPortProtectionLookupPortId OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each row is indexed by the IfIndex of a port in a
|
||
|
|
protection group, either a primary or a paired port.
|
||
|
|
Only PON ports can be selected."
|
||
|
|
::= { eqptPortProtectionLookupEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
eqptPortProtectionLookupPrimaryPortId OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
" This attribute represents the IfIndex of the primary
|
||
|
|
port of the protection group to which the key port
|
||
|
|
belongs.
|
||
|
|
Only PON ports can be selected."
|
||
|
|
::= { eqptPortProtectionLookupEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP ANY-TO-ANY PORTPROTECTION LOOKUP TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START PLANNED RESOURCE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
eqptBoardPlannedResourceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptBoardPlannedResourceEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table representing the actual values of configured hardware
|
||
|
|
resources on boards.
|
||
|
|
This table only displays entries for resources on the boards
|
||
|
|
that support this view. These are boards for which the relation
|
||
|
|
between HW resource consumption and system configuration is not
|
||
|
|
trivial.
|
||
|
|
If the board is not supporting this view, then no entries will
|
||
|
|
be displayed. The board does not physically need to be present
|
||
|
|
for displaying the resources.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 17 }
|
||
|
|
|
||
|
|
eqptBoardPlannedResourceEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptBoardPlannedResourceEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment planned resource table
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX {eqptSlotId, eqptBoardPlannedResourceId}
|
||
|
|
::= {eqptBoardPlannedResourceTable 1}
|
||
|
|
|
||
|
|
EqptBoardPlannedResourceEntry ::= SEQUENCE{
|
||
|
|
eqptBoardPlannedResourceId INTEGER,
|
||
|
|
eqptBoardPlannedResourceCurrentValue INTEGER,
|
||
|
|
eqptBoardPlannedResourceMaxValue INTEGER,
|
||
|
|
eqptBoardPlannedResourceDescription DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptBoardPlannedResourceId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index of the planned resource for a board
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptBoardPlannedResourceEntry 1}
|
||
|
|
|
||
|
|
eqptBoardPlannedResourceCurrentValue OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The actual planned value for the resource
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::={ eqptBoardPlannedResourceEntry 2}
|
||
|
|
|
||
|
|
eqptBoardPlannedResourceMaxValue OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum value that the board supports for this resource.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::={ eqptBoardPlannedResourceEntry 3}
|
||
|
|
|
||
|
|
eqptBoardPlannedResourceDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A string describing the planned resource for this board.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: NA
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::={ eqptBoardPlannedResourceEntry 4}
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP PLANNED RESOURCE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START POWER MANAGEMENT TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptPowerTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPowerEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Equipment power table, representing the power management objects per
|
||
|
|
system, rack or shelf.
|
||
|
|
This table contains one row for the system, rack or shelf that is
|
||
|
|
subject to power management. In other cases no entry is instantiated.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 18 }
|
||
|
|
|
||
|
|
eqptPowerEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPowerEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment power table.
|
||
|
|
An entry will be instantiated for a system/rack or shelf with active
|
||
|
|
power management functionality.
|
||
|
|
At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned
|
||
|
|
RANI-B/RPNI-B comply to this requirement.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES "
|
||
|
|
INDEX { eqptPowerId }
|
||
|
|
::= { eqptPowerTable 1 }
|
||
|
|
|
||
|
|
EqptPowerEntry ::= SEQUENCE {
|
||
|
|
eqptPowerId EqptHolderIndex,
|
||
|
|
eqptPowerAdminMode INTEGER,
|
||
|
|
eqptPowerOperMode INTEGER,
|
||
|
|
eqptPowerBatType INTEGER,
|
||
|
|
eqptPowerBatStartCapacity INTEGER,
|
||
|
|
eqptPowerBatPlannedLifetime INTEGER,
|
||
|
|
eqptPowerBatState INTEGER,
|
||
|
|
eqptPowerBatFailure INTEGER,
|
||
|
|
eqptPowerBatTemperature INTEGER,
|
||
|
|
eqptPowerBatActualCapacity INTEGER,
|
||
|
|
eqptPowerBatDefenseMode INTEGER,
|
||
|
|
eqptPowerBatDefenseThreshold INTEGER,
|
||
|
|
eqptPowerACState INTEGER,
|
||
|
|
eqptPowerACFailure INTEGER,
|
||
|
|
eqptPowerNDCaState INTEGER,
|
||
|
|
eqptPowerNDCaFailure INTEGER,
|
||
|
|
eqptPowerNDCbState INTEGER,
|
||
|
|
eqptPowerNDCbFailure INTEGER,
|
||
|
|
eqptPowerLDCaState INTEGER,
|
||
|
|
eqptPowerLDCaFailure INTEGER,
|
||
|
|
eqptPowerLDCbState INTEGER,
|
||
|
|
eqptPowerLDCbFailure INTEGER,
|
||
|
|
eqptPowerInVoltage INTEGER,
|
||
|
|
eqptPowerInCurrent INTEGER,
|
||
|
|
eqptPowerInConsumedPower INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPowerId OBJECT-TYPE
|
||
|
|
SYNTAX EqptHolderIndex
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index in equipment Power Table.
|
||
|
|
Index gives the shelf identification.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPowerEntry 1 }
|
||
|
|
|
||
|
|
eqptPowerAdminMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
ac (1),
|
||
|
|
ac-and-dc-local (2),
|
||
|
|
dc-network (3),
|
||
|
|
dc-network-and-dc-local (4),
|
||
|
|
dc-local (5)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The eqptPowerAdminMode shows the configured power mode.
|
||
|
|
This configured mode will be used to mask any failures detected
|
||
|
|
for non-supported modes.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = no powermanagement mode configured
|
||
|
|
1 = AC -> failures on DC local and DC network suppressed
|
||
|
|
2 = AC + DC local -> failures on DC network suppressed
|
||
|
|
3 = DC network -> failures on AC or DC local suppressed
|
||
|
|
4 = DC network + DC local -> failures on AC suppressed
|
||
|
|
5 = DC local -> failures on DC network or AC suppressed
|
||
|
|
Configuration of the eqptPowerAdminMode is not mandatory and will
|
||
|
|
not impact the behavior of the power module.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 2}
|
||
|
|
|
||
|
|
eqptPowerOperMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
ac (1),
|
||
|
|
ac-and-dc-local (2),
|
||
|
|
dc-network (3),
|
||
|
|
dc-network-and-dc-local (4),
|
||
|
|
dc-local (5),
|
||
|
|
battery-fallback (6)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The eqptPowerOperMode shows the power mode the NE is using at the
|
||
|
|
moment of reading.
|
||
|
|
The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO
|
||
|
|
(e.g. RANI-B or RPNI-B) will provide valid information for this
|
||
|
|
object.
|
||
|
|
Other systems without Power mode support get no-powermgnt (0).
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = system without an active power management
|
||
|
|
1 = AC
|
||
|
|
2 = AC + DC local
|
||
|
|
3 = DC network
|
||
|
|
4 = DC network + DC local
|
||
|
|
5 = DC local
|
||
|
|
6 = Battery fallback, i.e. only battery provides power to the system.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 3}
|
||
|
|
|
||
|
|
eqptPowerBatType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-configured (0),
|
||
|
|
agm-vrla-PbCa-battery (1),
|
||
|
|
agm-vrla-Pure-Pb-battery (2),
|
||
|
|
flooded-battery (3),
|
||
|
|
gel-battery (4)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
This object is used to configure the battery type.
|
||
|
|
This configuration only possible for planned powermanagement devices,
|
||
|
|
in this case a planned RANI-B or RPNI-B. Only values for supported
|
||
|
|
battery types are possible (e.g. in R51 only AGM/VRLA Lead Calcium
|
||
|
|
BATTERY (1) is supported for the RANI-B/RPNI-B)
|
||
|
|
The configured value is used to configure the power management driver.
|
||
|
|
The link between the configurable value and the battery type is:
|
||
|
|
0 = no battery configured
|
||
|
|
1 = AGM/VRLA Lead Calcium BATTERY
|
||
|
|
2 = AGM/VRLA Pure Lead BATTERY
|
||
|
|
3 = FLOODED BATTERY
|
||
|
|
4 = GEL BATTERY
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 4}
|
||
|
|
|
||
|
|
eqptPowerBatStartCapacity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The capacity (Ah) of the battery at the moment of installation.
|
||
|
|
The value of the capacity is in 1/100 Ah.
|
||
|
|
Instatiated when eqptPowerBatType is configured.
|
||
|
|
The configuration of this object is mandatory together with the
|
||
|
|
configuration of the eqptPowerBatType
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 1000 .. 10000
|
||
|
|
PERSIST: YES DEFVALUE: 1000 UNITS: 1/10O Ah "
|
||
|
|
::= { eqptPowerEntry 5}
|
||
|
|
|
||
|
|
eqptPowerBatPlannedLifetime OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Planned lifetime of the installed battery in 1/10 year.
|
||
|
|
The planned lifetime, together with the start capacity, is used to
|
||
|
|
calculate the actual maximal capacity of the battery.
|
||
|
|
Instatiated when eqptPowerBatType is configured.
|
||
|
|
The configuration of this object is mandatory together with the
|
||
|
|
configuration of the eqptPowerBatType
|
||
|
|
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 150
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: 1/10 Year "
|
||
|
|
::= { eqptPowerEntry 6}
|
||
|
|
|
||
|
|
eqptPowerBatState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-configured (0),
|
||
|
|
no-data (1),
|
||
|
|
charging (2),
|
||
|
|
charged (3),
|
||
|
|
discharging (4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The battery state will provide a view on the state of the battery.
|
||
|
|
Possible states are: charging, charged and discharging.
|
||
|
|
This operational state has meaning for devices that have a configured
|
||
|
|
eqptPowerBatType. Other devices get a not-configured (0) value returned.
|
||
|
|
Enumeration is as follows:
|
||
|
|
1 = no data available, e.g. battery configured, but not connected
|
||
|
|
2 = charging
|
||
|
|
3 = charged
|
||
|
|
4 = discharging
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 7}
|
||
|
|
|
||
|
|
eqptPowerBatFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-applicable (0),
|
||
|
|
voltage-good (1),
|
||
|
|
voltage-out-of-range (2),
|
||
|
|
over-voltage (3),
|
||
|
|
over-temperature (4),
|
||
|
|
battery-depleted (5)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The battery failure state will provide an view on the failure state of
|
||
|
|
the battery.
|
||
|
|
This failure state has meaning for devices that have a configured
|
||
|
|
eqptPowerBatType and eqptPowerBatState different from default or
|
||
|
|
no-data. Other devices get a not-applicable (0) value returned.
|
||
|
|
Specific ranges for the failure cases strongly depend on the battery type
|
||
|
|
used. The ranges will be detailed in the customer documentation.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = not applicable
|
||
|
|
1 = voltage good
|
||
|
|
2 = voltage out of range
|
||
|
|
3 = over-voltage
|
||
|
|
4 = over-temperature alarm on local temperature sensor
|
||
|
|
5 = battery depleted
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 8}
|
||
|
|
|
||
|
|
eqptPowerBatTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Measured temperature of the battery in 1/10 Celcius
|
||
|
|
The value is only readable when the battery type (eqptPowerBatType)
|
||
|
|
is configured and the battery is installed and reachable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: -1000 .. 1000
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Celcius "
|
||
|
|
::= { eqptPowerEntry 9}
|
||
|
|
|
||
|
|
eqptPowerBatActualCapacity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The capacity (in % of a fully charged battery) of the battery.
|
||
|
|
The value is only readable when the battery type (eqptPowerBatType)
|
||
|
|
is configured and the battery is installed and reachable.
|
||
|
|
Default value of 0% is returned when the battery is not reachable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0 - 100
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: % "
|
||
|
|
::= { eqptPowerEntry 10}
|
||
|
|
|
||
|
|
eqptPowerBatDefenseMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-defense (0),
|
||
|
|
voice-priority (1)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The battery defense modes offers the operator the possibility to
|
||
|
|
select the preferred power defense mode in case the system falls
|
||
|
|
back to the battery mode. The power defense mode is a way to
|
||
|
|
optimize the power consumption. In R5001 two options are possible.
|
||
|
|
In later releases additional defense modes will be introduced.
|
||
|
|
- no battery defense. In this mode the system will run normally,
|
||
|
|
offering regular service until the battery runs out and the
|
||
|
|
regular hw defenses are started (Dying Gasp)
|
||
|
|
- voice priority. In this mode when the system falls back to the
|
||
|
|
battery the regular service will be maintained until the battery
|
||
|
|
drains until 90% and will then give priority to the voice LT's by
|
||
|
|
powering down the DSL LT's. Voice service will be maintained until
|
||
|
|
the battery runs out and the regular hw defenses are started (Dying
|
||
|
|
Gasp).
|
||
|
|
This configuration only possible for planned powermanagement devices,
|
||
|
|
in this case a planned RANI-B or RPNI-B.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: YES DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 11}
|
||
|
|
|
||
|
|
eqptPowerBatDefenseThreshold OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The threshold gives an indication of the remaining capacity of the
|
||
|
|
battery at the moment the defense defined in eqptPowerBatDefenseMode
|
||
|
|
should be started. The value is in %. In the default case the configured
|
||
|
|
defense mode is immediately activated.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0-100
|
||
|
|
PERSIST: YES DEFVALUE: 80 UNITS: % "
|
||
|
|
::= { eqptPowerEntry 12}
|
||
|
|
|
||
|
|
|
||
|
|
eqptPowerACState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
active (1),
|
||
|
|
active-failure (2),
|
||
|
|
failure (3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The AC power state will provide an view on the state of the AC Power
|
||
|
|
supply.
|
||
|
|
The value is different from no-powermgnt (0) for devices with power
|
||
|
|
management functionality and AC input available.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = no-powermgnt
|
||
|
|
1 = active
|
||
|
|
2 = active-failure, i.e. in failure, but still providing power
|
||
|
|
3 = failure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 13}
|
||
|
|
|
||
|
|
eqptPowerACFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-applicable (0),
|
||
|
|
voltage-good (1),
|
||
|
|
voltage-out-of-range (2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The AC failure state will provide an view on the failure state of
|
||
|
|
the AC power supply.
|
||
|
|
This failure state has meaning when eqptPowerACstate different from
|
||
|
|
default. In other cases not-applicable (0) is returned.
|
||
|
|
Specific ranges for the failure cases strongly depend on the AC power
|
||
|
|
used. The ranges will be detailed in the customer documentation.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = not-applicable
|
||
|
|
1 = voltage good
|
||
|
|
2 = voltage out of range
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 14}
|
||
|
|
|
||
|
|
eqptPowerNDCaState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
active (1),
|
||
|
|
active-failure (2),
|
||
|
|
failure (3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The NDCa (Network DC a) state will provide an view on the state of
|
||
|
|
the Network DC Power supply.
|
||
|
|
The value is different from no-powermgnt (0) for devices with power
|
||
|
|
management functionality and NDC a input available.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = no-powermgnt
|
||
|
|
1 = active
|
||
|
|
2 = active-failure, i.e. in failure, but still providing power
|
||
|
|
3 = failure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 15}
|
||
|
|
|
||
|
|
eqptPowerNDCaFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-applicable (0),
|
||
|
|
voltage-good (1),
|
||
|
|
low-voltage(2),
|
||
|
|
under-voltage(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The NDCa failure state will provide an view on the failure state of
|
||
|
|
the Network DC a power supply.
|
||
|
|
This failure state has meaning when eqptPowerNDCaState different from
|
||
|
|
default. In other cases not-applicable (0) is returned.
|
||
|
|
Specific ranges for the failure cases strongly depend on the DC power
|
||
|
|
used. The ranges will be detailed in the customer documentation.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = not-applicable
|
||
|
|
1 = voltage-good
|
||
|
|
2 = low-voltage
|
||
|
|
3 = under-voltage
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 16}
|
||
|
|
|
||
|
|
eqptPowerNDCbState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
active (1),
|
||
|
|
active-failure (2),
|
||
|
|
failure (3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The NDCb (Network DC a) state will provide an view on the state of
|
||
|
|
the Network DC b power supply.
|
||
|
|
The value is different from no-powermgnt (0) for devices with power
|
||
|
|
management functionality and NDC b input available.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = no-powermgnt
|
||
|
|
1 = active
|
||
|
|
2 = active-failure, i.e. in failure, but still providing power
|
||
|
|
3 = failure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 17}
|
||
|
|
|
||
|
|
eqptPowerNDCbFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-applicable (0),
|
||
|
|
voltage-good (1),
|
||
|
|
low-voltage(2),
|
||
|
|
under-voltage(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The NDCb failure state will provide an view on the failure state of
|
||
|
|
the Network DC b power supply.
|
||
|
|
This failure state has meaning when eqptPowerNDCbState different from
|
||
|
|
default. In other cases not-applicable (0) is returned.
|
||
|
|
Specific ranges for the failure cases strongly depend on the DC power
|
||
|
|
used. The ranges will be detailed in the customer documentation.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = not-applicable
|
||
|
|
1 = voltage-good
|
||
|
|
2 = low-voltage
|
||
|
|
3 = under-voltage
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 18}
|
||
|
|
|
||
|
|
eqptPowerLDCaState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
active (1),
|
||
|
|
active-failure (2),
|
||
|
|
failure (3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The LDCa power state will provide an view on the state of the local
|
||
|
|
DC a power supply.
|
||
|
|
The value is different from no-powermgnt (0) for devices with power
|
||
|
|
management functionality and LDC a input available.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = no-powermgnt
|
||
|
|
1 = active
|
||
|
|
2 = active-failure, i.e. in failure, but still providing power
|
||
|
|
3 = failure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 19}
|
||
|
|
|
||
|
|
eqptPowerLDCaFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-applicable (0),
|
||
|
|
voltage-good (1),
|
||
|
|
voltage-out-of-range (2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The LDCa failure state will provide an view on the failure state of
|
||
|
|
the local DC a power supply.
|
||
|
|
This failure state has meaning when eqptPowerLDCaState different from
|
||
|
|
default. In other cases not-applicable (0) is returned.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = not-applicable
|
||
|
|
1 = voltage good
|
||
|
|
2 = voltage out of range
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 20}
|
||
|
|
|
||
|
|
eqptPowerLDCbState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-powermgnt (0),
|
||
|
|
active (1),
|
||
|
|
active-failure (2),
|
||
|
|
failure (3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The LDCb power state will provide an view on the state of the local
|
||
|
|
DC b power suply.
|
||
|
|
The value is different from no-powermgnt (0) for devices with power
|
||
|
|
management functionality and LDC b input available.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = no-powermgnt
|
||
|
|
1 = active
|
||
|
|
2 = active-failure, i.e. in failure, but still providing power
|
||
|
|
3 = failure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 21}
|
||
|
|
|
||
|
|
eqptPowerLDCbFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
not-applicable (0),
|
||
|
|
voltage-good (1),
|
||
|
|
voltage-out-of-range (2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
The LDCb failure state will provide an view on the failure state of
|
||
|
|
the local DC b power supply.
|
||
|
|
This failure state has meaning when eqptPowerLDCbState different from
|
||
|
|
default. In other cases not-applicable (0) is returned.
|
||
|
|
Enumeration is as follows:
|
||
|
|
0 = not-applicable
|
||
|
|
1 = voltage good
|
||
|
|
2 = voltage out of range
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: - "
|
||
|
|
::= { eqptPowerEntry 22}
|
||
|
|
|
||
|
|
eqptPowerInVoltage OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Measured incoming voltage in 1/10 Volt
|
||
|
|
Only supported for devices that host an extended power management
|
||
|
|
function (e.g RANI-B and RPNI-B).
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 2650
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Volt "
|
||
|
|
::= { eqptPowerEntry 23}
|
||
|
|
|
||
|
|
eqptPowerInCurrent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Measured incoming current in 1/10 Ampere
|
||
|
|
Only supported for devices that host an extended power management
|
||
|
|
function (e.g RANI-B and RPNI-B).
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 60
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Ampere "
|
||
|
|
::= { eqptPowerEntry 24}
|
||
|
|
|
||
|
|
eqptPowerInConsumedPower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Calculated incoming consumed power in 1/10 Watt
|
||
|
|
Only supported for devices that host an extended power management
|
||
|
|
function (e.g RANI-B and RPNI-B).
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 6000
|
||
|
|
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Watt "
|
||
|
|
::= { eqptPowerEntry 25}
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP POWER MANAGEMENT OBJECTS |
|
||
|
|
-- ==================================================================
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START POWER SUPPLY MANAGEMENT TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
eqptPowerSupplyTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPowerSupplyEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Equipment power table, representing the power suplly management objects
|
||
|
|
This table contains one row per power supply supported on the system.
|
||
|
|
In other cases no entry is instantiated.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { asamEquipmentMIB 19 }
|
||
|
|
|
||
|
|
eqptPowerSupplyEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPowerSupplyEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment power table.
|
||
|
|
An entry will be instantiated per power supply supported on the system.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES "
|
||
|
|
INDEX { eqptPowerSupplyId }
|
||
|
|
::= { eqptPowerSupplyTable 1 }
|
||
|
|
|
||
|
|
EqptPowerSupplyEntry ::= SEQUENCE {
|
||
|
|
eqptPowerSupplyId EqptPowerSupplyIndex,
|
||
|
|
eqptPowerSupplyPartNumber OCTET STRING,
|
||
|
|
eqptPowerSupplyCleiCode OCTET STRING,
|
||
|
|
eqptPowerSupplySerNumber OCTET STRING,
|
||
|
|
eqptPowerSupplyVin INTEGER,
|
||
|
|
eqptPowerSupplyIin INTEGER,
|
||
|
|
eqptPowerSupplyVout INTEGER,
|
||
|
|
eqptPowerSupplyIout INTEGER,
|
||
|
|
eqptPowerSupplyTemperature INTEGER,
|
||
|
|
eqptPowerSupplyFaultVin INTEGER,
|
||
|
|
eqptPowerSupplyFaultVout INTEGER,
|
||
|
|
eqptPowerSupplyFaultIin INTEGER,
|
||
|
|
eqptPowerSupplyFaultIout INTEGER,
|
||
|
|
eqptPowerSupplyFaultTemperature INTEGER,
|
||
|
|
eqptPowerSupplyFaultCml INTEGER,
|
||
|
|
eqptPowerSupplyPresent INTEGER,
|
||
|
|
eqptPowerSupplyFaultDetected INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPowerSupplyId OBJECT-TYPE
|
||
|
|
SYNTAX EqptPowerSupplyIndex
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index in equipment Power Supply Table.
|
||
|
|
This is a number representing the Nth power supply present in the system.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPowerSupplyEntry 1}
|
||
|
|
|
||
|
|
eqptPowerSupplyPartNumber OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING(SIZE(13))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the part number of the installed power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 2}
|
||
|
|
|
||
|
|
eqptPowerSupplyCleiCode OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING(SIZE(11))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the CLEI code of the installed power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 3}
|
||
|
|
|
||
|
|
eqptPowerSupplySerNumber OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING(SIZE(19))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the serial number of the installed power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 4}
|
||
|
|
|
||
|
|
eqptPowerSupplyVin OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the incoming voltage arriving at the power supply in millivolt
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 5}
|
||
|
|
|
||
|
|
eqptPowerSupplyIin OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the incoming current arriving at the power supply in milliampere
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 6}
|
||
|
|
|
||
|
|
eqptPowerSupplyVout OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the output voltage provided by the power supply in millivolt
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 7}
|
||
|
|
|
||
|
|
eqptPowerSupplyIout OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the output current provided by the power supply in milliampere
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 8}
|
||
|
|
|
||
|
|
eqptPowerSupplyTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the temperature of the power supply in millidegree
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 9}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultVin OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-error (0),
|
||
|
|
input-overvoltage-fault (1),
|
||
|
|
input-overvoltage-warning (2),
|
||
|
|
input-undervoltage-warning (3),
|
||
|
|
input-undervoltage-fault (4),
|
||
|
|
input-ac-nok-fault (5),
|
||
|
|
input-ac-nok-warning (6),
|
||
|
|
unit-off-for-insufficient-input-voltage (7)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the fault or warning occurring for the input voltage
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 10}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultVout OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-error (0),
|
||
|
|
output-overvoltage-fault (1),
|
||
|
|
output-overvoltage-warning (2),
|
||
|
|
output-undervoltage-warning (3),
|
||
|
|
output-undervoltage-fault (4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the fault or warning occurring for the output voltage
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 11}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultIin OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-error (0),
|
||
|
|
input-overcurrent-fault (1),
|
||
|
|
input-overcurrent-warning (2),
|
||
|
|
input-overpower-warning (3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the fault or warning occurring for the input current
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 12}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultIout OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-error (0),
|
||
|
|
output-overcurrent-fault (1),
|
||
|
|
output-overcurrent-warning (2),
|
||
|
|
output-undercurrent-warning (3),
|
||
|
|
output-undercurrent-fault (4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the fault or warning occurring for the output current
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 13}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-error (0),
|
||
|
|
overtemperature-fault (1),
|
||
|
|
overtemperature-warning (2),
|
||
|
|
undertemperature-warning (3),
|
||
|
|
undertemperature-fault (4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the fault or warning occurring for the tempertaure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 14}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultCml OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no-error (0),
|
||
|
|
invalid-or-unsupported-command-received (1),
|
||
|
|
invalid-or-unsupported-data-received (2),
|
||
|
|
packet-error-check-failed (3),
|
||
|
|
memory-fault-detected (4),
|
||
|
|
processor-fault-detected (5),
|
||
|
|
other-communication-fault (6),
|
||
|
|
other-memory-or-logic-fault (7)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the fault or warning occurring for the tempertaure
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 15}
|
||
|
|
|
||
|
|
eqptPowerSupplyPresent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
yes (0),
|
||
|
|
no (1)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report if the power supply is present.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 16}
|
||
|
|
|
||
|
|
eqptPowerSupplyFaultDetected OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
no (0),
|
||
|
|
yes (1)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report if a fault has been detected. If yes, then
|
||
|
|
eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout,
|
||
|
|
eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut,
|
||
|
|
eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml
|
||
|
|
is reporting an error.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerSupplyEntry 17}
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP POWER SUPPLY MANAGEMENT TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptPowerSupplyRftc OBJECT IDENTIFIER ::= { asamEquipmentMIB 20 }
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START POWER SUPPLY RFT-C COMMON TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptPowerRftcTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPowerRftcEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Equipment RFT-C power table, representing the RFT-C management objects
|
||
|
|
This table contains one row per RFT-C module supported on the system.
|
||
|
|
In other cases no entry is instantiated.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { eqptPowerSupplyRftc 1 }
|
||
|
|
|
||
|
|
eqptPowerRftcEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPowerRftcEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry of the equipment RFT-C power table.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES "
|
||
|
|
INDEX { eqptPowerRftcId }
|
||
|
|
::= { eqptPowerRftcTable 1 }
|
||
|
|
|
||
|
|
EqptPowerRftcEntry ::= SEQUENCE {
|
||
|
|
eqptPowerRftcId EqptHolderIndex,
|
||
|
|
eqptPowerRftcVCommon INTEGER,
|
||
|
|
eqptPowerRftcICommon INTEGER,
|
||
|
|
eqptPowerRftcTHotspot INTEGER,
|
||
|
|
eqptPowerRftcTAmbient INTEGER,
|
||
|
|
eqptPowerRftcSWVersion DisplayString,
|
||
|
|
eqptPowerRftcHWVersion DisplayString,
|
||
|
|
eqptPowerRftcHWRevision INTEGER,
|
||
|
|
eqptPowerRftcSerialnumber DisplayString,
|
||
|
|
eqptPowerRftcManufacturer DisplayString,
|
||
|
|
eqptPowerRftcLineCount INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPowerRftcId OBJECT-TYPE
|
||
|
|
SYNTAX EqptHolderIndex
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Index in equipment Power RFT-C Table.
|
||
|
|
This is a number represents the shelf containting the RFT-C module.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPowerRftcEntry 1}
|
||
|
|
|
||
|
|
eqptPowerRftcVCommon OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the common voltage arriving at the power supply in millivolt
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: mV "
|
||
|
|
::= { eqptPowerRftcEntry 2}
|
||
|
|
|
||
|
|
eqptPowerRftcICommon OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the common current arriving at the power supply in milliampere
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: mA "
|
||
|
|
::= { eqptPowerRftcEntry 3}
|
||
|
|
|
||
|
|
eqptPowerRftcTHotspot OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the temperature of the power supplys hotspot in degrees celcius
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: °C"
|
||
|
|
::= { eqptPowerRftcEntry 4}
|
||
|
|
|
||
|
|
eqptPowerRftcTAmbient OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the ambient temperature of the power supply in degrees celcius
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: °C"
|
||
|
|
::= { eqptPowerRftcEntry 5}
|
||
|
|
|
||
|
|
eqptPowerRftcSWVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the software version of the RFT-C power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerRftcEntry 6}
|
||
|
|
|
||
|
|
eqptPowerRftcHWVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the hardware version of the RFT-C power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerRftcEntry 7}
|
||
|
|
|
||
|
|
eqptPowerRftcHWRevision OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report hardware revision of the RFT-C power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerRftcEntry 8}
|
||
|
|
|
||
|
|
eqptPowerRftcSerialnumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report serial number of the RFT-C power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerRftcEntry 9}
|
||
|
|
|
||
|
|
eqptPowerRftcManufacturer OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the manufacturer code of the RFT-C power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerRftcEntry 10}
|
||
|
|
|
||
|
|
eqptPowerRftcLineCount OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS optional
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
Report the number of lines used on this RFT-C power supply
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: - "
|
||
|
|
::= { eqptPowerRftcEntry 11}
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | STOP POWER SUPPLY RFT-C COMMON TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
-- ==================================================================
|
||
|
|
-- | START POWER SUPPLY RFT-C LINE TABLE |
|
||
|
|
-- ==================================================================
|
||
|
|
|
||
|
|
eqptPowerRftcLineTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EqptPowerRftcLineEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES TABLESIZE: DEP as described above"
|
||
|
|
::= { eqptPowerSupplyRftc 2 }
|
||
|
|
|
||
|
|
eqptPowerRftcLineEntry OBJECT-TYPE
|
||
|
|
SYNTAX EqptPowerRftcLineEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the eqptPowerRftcLineTable.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES"
|
||
|
|
INDEX { eqptPowerRftcId, eqptPowerRftcLineId }
|
||
|
|
::= { eqptPowerRftcLineTable 1 }
|
||
|
|
|
||
|
|
EqptPowerRftcLineEntry ::= SEQUENCE {
|
||
|
|
eqptPowerRftcLineId INTEGER,
|
||
|
|
eqptPowerRftcLineStatus EqptPowerRftcLineStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
eqptPowerRftcLineId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Report the line number
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPowerRftcLineEntry 1 }
|
||
|
|
|
||
|
|
eqptPowerRftcLineStatus OBJECT-TYPE
|
||
|
|
SYNTAX EqptPowerRftcLineStatus
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Report the line status.
|
||
|
|
|
||
|
|
ALCATEL NOTE:
|
||
|
|
SUPPORT: YES INSRVMOD: NA RANGE: See above
|
||
|
|
PERSIST: NO DEFVALUE: NA UNITS: -"
|
||
|
|
::= { eqptPowerRftcLineEntry 2 }
|
||
|
|
|
||
|
|
END
|
||
|
|
|