david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/nokia/ASAM-EQUIP-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

5081 lines
182 KiB
Plaintext
Raw Blame History

ASAM-EQUIP-MIB DEFINITIONS ::= BEGIN
-- ==========================================================================
-- This specification is published by Alcatel-Lucent under Non-Disclosure
-- Agreement(s) (NDA) with specific parties and has to be considered as
-- Confidential Information as defined in such NDA.
-- Alcatel-Lucent reserves the right to revise this document for any reason,
-- including but not limited to conformity with standards promulgated by
-- various agencies, utilisation of advances in the state of the technical
-- areas, or the reflection of changes in the design of any equipment,
-- techniques, or procedures described or referred to herein.
-- The product specifications and other technical or performance information
-- contained herein are subject to change without notice.
-- Updates of this document will be issued under the above NDA's.
-- Alcatel-Lucent makes no representation or warranty, expressed or implied,
-- with respect to the sufficiency, accuracy, or utility of any information
-- or opinion contained herein. Alcatel-Lucent expressly advises that any
-- use of for any purpose or reliance upon this technical reference is at
-- the risk of the user and that Alcatel-Lucent shall not be liable for any
-- damage or injury incurred by any person arising out of the sufficiency,
-- accuracy, or utility of any information or opinion contained herein.
-- This document is not to be construed as a suggestion to any manufacturer
-- to modify or change any of its products, nor does this document represent
-- any commitment by Alcatel-Lucent to sell or purchase any product.
-- Nothing contained herein shall be construed as conferring by implication,
-- estoppel, or otherwise any license or right under any patent, whether or
-- not the use of any information herein necessarily employs an invention of
-- any existing or later issued patent.
-- Alcatel-Lucent reserves the right not to offer any or all of these
-- products and to withdraw any or all of them at any future time.
-- Copyright (C) 2001-2009, Alcatel-Lucent. All Rights Reserved.
-- ===========================================================================
--
-- MODULE-IDENTITY
-- LAST-UPDATED "201512130000Z"
-- ORGANIZATION "Alcatel-Lucent"
-- CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.com"
--
-- REVISION "201702100000Z"
-- DESCRIPTION
-- "Editor: Bart De Vos
-- Reason for change: add support for an RFT-C power module on SX-48U (SRNT-K)
--
-- REVISION "201611070000Z"
-- DESCRIPTION
-- "Editor: Yangxiong Xia
-- Reason for change: add new shelf mode ngpon-port-reduced(9) to eqptHolderMode object for isam 7362 SF 16-GW and DF 16-GW Low capacity
--
-- REVISION "201610210000Z"
-- DESCRIPTION
-- "Editor: Lut Mertens
-- Reason for change: Replace EqptHolderIndex by EqptPowerSupplyIndex in eqptPowerSupplyId object
--
-- REVISION "201610170000Z"
-- DESCRIPTION
-- Version: 3EC36485EDAA_V5.6.0.0.0
-- Editor: Mani Batta
-- Reason for change: RCR: ALU01872170 (Reset LT restart counter)
-- Change: Introduced two MIBs- eqptBoardRestartCountPerLt and eqptBoardClearRestartCountPerLt in ASAM-EQUIP-MIB.mib.
--
-- REVISION "201608290000Z"
-- DESCRIPTION
-- "Editor: Weihai LU
-- Reason for change: add new shelf mode ngpon_supported(7) and gpon_supported(8) to eqptHolderMode object
--
--
-- REVISION "201602080000Z"
-- DESCRIPTION
-- "Editor: Eirini Tzimi
-- Reason for change: add new shelf mode ntbntioextlt-unsupported(4) to eqptHolderMode object
--
--
-- REVISION "201512220000Z"
-- DESCRIPTION
-- "Editor: Qiong K WU
-- Reason for change: ALU02004304 (Next generation NT-FANT-G)
-- Change: add new eqptPortMappingPhyPortType: cfp(14)
--
-- REVISION "201512130000Z"
-- DESCRIPTION
-- "Editor: Laurent Carlier
-- Reason for change: add eqptPowerSupplyTable table
--
--
-- REVISION "201404150000Z"
-- DESCRIPTION
-- "Editor: Bala Amudha Pal Samy
-- Changes :
-- Added a new mode ntb-unsupported(3) to eqptHolderMode object (ALU01919868)
--
-- REVISION "201310230000Z"
-- DESCRIPTION
-- "Editor: Qiong K WU
-- Reason for change: ALU01870122 ISR50 DPoE data path redundancy (Phase I)
-- Change: Add new reason for eqptProtElementStandbyStatuschangeReason
-- Add new reason for eqptProtGroupLastSwitchoverReason
--
-- REVISION "201309180000Z"
-- DESCRIPTION
-- "Editor: Tom Van Peteghem
-- Reason for change: ALU01873072 NELT-B VLAN/QoS resource pooling
-- Change: Add eqptBoardPlannedResourceTable
--
-- REVISION "201304250000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.6.0.0.3
-- Editor: Karel Meijfroidt
-- Reason for change: ALU01815260, Alarm Mechanism Improvement
-- Change: change the RANGE in the description of the eqptCustAlarmProfileSeverity.
--
-- REVISION "201304090000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.6.0.0.2
-- Editor: Marita Saveyn
-- Reason for change: ALU01873776, eqptPortMapping attributes returns NoSuch Instance for ISAM4501, FANT-F board
-- Change: EqptPortMappingTable: changes to eqptPortMappingLogPortType (add 4) and eqptPortMappingPhyPortSlot (desc)
-- eqptPortMappingPhyPortType (add 13) and eqptPortMappingPhyPortNbr (desc)
--
-- REVISION "201303260000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.6.0.0.1
-- Editor: Vanapatla Ramana
-- Reason for change: ALU01868639, MIB readiness for 2.5G Expansion links on NRNT-A
-- Change: eqptSlotPlannedCapabilityProfile: change to description.
--
-- REVISION "201303200000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.6.0.0.0
-- Editor: Long Zhigang
-- Changes: Add three new attributes in eqptHolderTable (RCR ALU01814646)
-- - eqptHolderSerialNumber
-- - eqptHolderVariant
-- - eqptHolderICScode
--
-- REVISION "201201008000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.5.0.0.0
-- Editor: Dirk De la Marche
-- Changes: Change to description of CTRL functionality (NRCD-C introduction)
--
-- REVISION "201208220000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.5.0.0.0
-- Editor: Vijayakumar Kanniah
-- Changes: eqptHolderMode: change to description (RCR ALU01807846)
--
--
-- REVISION "201208100000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.4.0.3.0
-- Editor: Marita Saveyn
-- Changes: eqptProtGroupTable: change to description (ALU01810586)
--
--
-- REVISION "201202090000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.4.0.0.0
-- Editor: Danny Sioncke
-- Changes: Added eqptPortProtectionTable (RCR ALU00123609)
-- Added eqptPortProtectionLookupTable (RCR ALU00123609)
--
--
-- REVISION "201104290000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.3.0.0.1
-- Editor: Vijayakumar Kanniah
-- Changes: Added eqptBoardOperError download-ongoing for supporting NRCD-B Automatic download (IR ALU01198543)
--
--
-- REVISION "201103040000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.3.0.0.0
-- Editor: Lieve Dierick
-- Changes :
-- ALU01096382 : new MIB object to store the intelligent FAN mode (IR ALU01096386)
--
-- REVISION "201008090000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.2.0.1.4
-- Editor: Tom Van Peteghem
-- Changes :
-- ALU00492406 : MIB description of the eqptBoardInventorySerialNumber
-- must be extended with year/week info
--
-- REVISION "201005110000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.2.0.0.1
-- Editor: Jean Samoise
-- Changes :
-- AALU00117331 :
-- Add scalar global change counter for remote lt portmapping changes.
---
-- REVISION "201003290000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.2.0.0.0
-- Editor: Jean Samoise
-- Changes :
-- AALU00117331 :
-- Generate trap at configuration change of the PortMapping data.
--
--
-- REVISION "201003040000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.2.0.0.0
-- Editor: Jean SamoiseIR context drop NRNT-A
-- Changes :
-- ALU00159858 :
-- Add eth,vp, mcast to eqptPortMappingPhyPortType
--- REVISION "200910010000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.0.0.0.0
-- Editor: Rik Verstraete
-- Changes :
-- ANTmt71411 ISAM/FTTU Merge Equipment Domain
-- Add eqptBoardIfSlotId to eqptBoardTable
--
-- REVISION "200908250000Z "
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V4.1.0.0.2
-- Editor : Peter Van Mele
-- Reason for change: ANTmt72355, licensing of load balancing/redundancy
-- Change: default value of the NT redundancy protection group is disabled.
--
-- REVISION "2009071300000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V4.1.0.0.1
-- Editor: Dirk De la Marche
-- Changes :
-- eqptProtElementStandbyStatuschangeReason : new additions
-- due to NANT-D redundancy (See ANTms38234)
-- new values: (18), (19) and (20)
--
-- REVISION "20090630"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V4.1.0.0.0
-- Editor : Sven Dhuyvetter
-- Reason for change: ANTms80204, 'Up/Downlink faceplate nr mapping for O
-- Change: Add new PortMapping table definition.
--
-- REVISION "2009012210007Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V4.0.0.0.1
-- Editor: Viviane Verswijvel
-- Changes :
-- eqptProtElementStandbyStatuschangeReason : new desccriptions
-- to be compatible with XVPS (See FR ANTmt34321)
--
-- REVISION "200803040000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.7.0.0.3
-- Editor: Furqan Haq
-- Changes :
-- Added a new mode ntio-unsupported(6) to eqptHolderMode object
-- Added a new mnemonics NOT_ALLOWED to eqptSlotPlannedType
-- Added new error type to eqptBoardOperError for reporting
-- BoardInsertedInIncompatibleSlot
--
-- REVISION "200803104000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.7.0.0.0
-- Editor: Viviane Verswijvel
-- Changes:
-- Add 2 new reasons for switch over
-- Add reason for standby change state reason
-- => Hitless Redundancy R3.7
--
-- REVISION "200711080000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.6.0.0.2
-- Editor: Danny Sioncke
-- Changes:
-- In eqptBoardTable, eqptBoardDualHostIPAddress and
-- eqptBoardDualHostLsmLocation are added.
-- REVISION "200707260000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.6.0.0.0
-- Editor: Lu Hao
-- Changes:
-- Add a new table, eqptBoardThermalSensorTable to eqptEquipmentMIB
--
-- REVISION "200707240000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.5.0.0.3
-- Editor: Bo Liu
-- Changes:
-- restartFromDefaultPresOAM and restartFromDefaultTotal are no longer
-- supported in eqptAsamRestart.
--
-- REVISION "200706010000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.5.0.0.2
-- Editor: Bo Liu
-- Changes:
-- Add the new equipment practice LEWW in the description of
-- eqptHolderPlannedType.
--
-- REVISION "200705230000Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.5.0.0.1
-- Editor: Wang Jianglin
-- Changes:
-- Add the xVPS identifier to equipment table.
--
-- REVISION "200705210900Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.5.0.0.0
-- Editor: Liu Jie
-- Changes:
-- - Add the test head type for four-wire or two-wire test
--
--
-- MODULE-IDENTITY
-- LAST-UPDATED "200704241735Z"
-- ORGANIZATION "Alcatel"
-- CONTACT-INFO "email: asam.mibsupport@alcatel-lucent.be"
--
-- DESCRIPTION
-- "The ASAM Equipment Management MIB is a vendor-specific MIB that is
-- used to manage the equipment (racks, shelves, and pluggable equipment)
-- of the ASAM subsystem in the ESAM.
--
-- REVISION "200706151600Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.4.0.0.2
-- Editor: Sven Dhuyvetter
-- Changes:
-- - restartFromDefaultPresOAM and restartFromDefaultTotal no longer
-- supported in eqptAsamRestart.
--
-- REVISION "200703291600Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.4.0.0.1
-- Editor: Danny Sioncke
-- Changes:
-- - CTRL added in descriptions where applicable.
--
-- REVISION "200702021600Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.4.0.0.0
-- Editor: He Yang
-- Changes:
-- - Add three parameter in eqptboardtable: eqptBoardLastRestartCause,
-- eqptBoardLastRestartTime, eqptBoardRestartNumberOfChanges.
-- - Add eqptRestartNumberOfChanges
--
-- REVISION "200704241735Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.3.0.2.2
-- Editor: John Chuah
-- Changes:
-- - reverted EqptTestChainEntry and eqptTestChainShelfToTapUp to
-- match the definition that was already shipped since R3.1"
--
-- REVISION "200704191800Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.3.0.2.1
-- Editor: Furqan Haq
-- Changes:
-- - reverted the index order of eqptProfileApplicabilityEntry to
-- match the definition that was already shipped since R2.5"
--
-- REVISION "200701041600Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.3.0.2.0
-- Editor: Sven Dhuyvetter
-- Changes:
-- - update DEFVALUE in ALCATEL NOTE.
--
-- REVISION "200612182245Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_V3.3.0.1.0
-- Editor: John Chuah
-- Changes:
-- - increased upper range of eqptMaxRacksPerAsam from 6 to 7 and
-- eqptMaxShelvesPerRack from 3 to 4.
-- - increased rack and shelf ranges for LEEU, LEUS and LNEU in
-- eqptHolderPlannedType.
--
-- REVISION "200609161200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.3.0.0
-- Editor: Zhu Sunbin
-- Changes:
-- - eqptProtGroupTable tablesize from 1 row to rows number depending on
-- shelf type in Alcatel Notes.
-- - eqptProtElementTable tablesize from 2 rows to rows number depending on
-- shelf type in Alcatel Notes.
-- - eqptProtElementGroupId DEFVALUE from 1 to NA
-- - eqptProtGroupId DEFVALUE from 1 to NA
-- - added notInService(2) in Alcatel Notes for eqptProtGroupRowStatus
--
-- REVISION "200606161200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.1.0.0.3
-- Editor: Lucien Marcotte
-- Changes:
-- - For HYNT, changed eqptMaxSlotsPerShelf from 21 to 22 in Alcatel Notes.
--
-- REVISION "200606011200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.1.0.0.2
-- Editor: Bo Liu
-- Changes: ITSC
-- - Added eqptTestChainTable.
--
-- REVISION "200605231200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.0.0.4
-- Editor: Danny Sioncke
-- Changes: - eqptCustAlarmProfile non-REM introduced items put to
-- "SUPPORT: NO".
--
-- REVISION "200604211200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.0.0.3
-- Editor: Danny Sioncke
-- Changes: - eqptCustAlarmProfile id changed from nr. 7 to nr. 8,
-- solving conflict with eqptTestChainTable (ITSC).
-- - references to asamCustAlarm-xxx corrected to
-- eqptCustAlarm-xxx
--
-- REVISION "200512131200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.0.0.2
-- Editor: Sven Dhuyvetter
-- Changes: update for 8 PVC (BDFhw31519)
-- - add eqptSlotPlannedCapabilityProfile to eqptBoardTable
-- - add eqptProfileApplicabilityTable
-- - add eqptProfileTable
-- - add eqptProfileDescriptionTable
-- Editor: Danny Sioncke
-- Changes: update for REM (BDFhw36030)
-- - add eqptCustAlarmProfileTable
-- - add eqptCustAlarmProfileMappingTable
--
-- REVISION "200511301200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E3.0.0.1
-- Editor: zhu jianhua
-- Changes: update for NEP (BDFhw62300), add eqptHolderMode
--
-- REVISION "200509161200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E2.4.0.0
-- Editor: vairamuthu karuppiah
-- Changes: "Added eqptBoardOperError sem-power-fail,sem-ups-fail"
--
-- REVISION "200506031200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E2.3.0.1
-- Editor: Bart Geldof/Christophe De Ras
-- Changes: ODM Framework
-- - Added ODM Eqt Boardtype treated as unmanaged board.
--
-- REVISION "200504281200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E2.3.0.0
-- Editor: Lucien Marcotte
-- Changes: HYNT FGR1.0 (new product release)
-- - Added the new Eqt Board current and planned type EXT_MANAGED.
--
-- REVISION "200412061200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E2.2.0.0
-- Editor: FAN Min
-- Changes: support the eqptProt Table for ISAM R2.2 NT Redundancy Feature
-- * eqptProtGroupLastSwitchoverReason : add "LanxFailure(13)""
--
-- REVISION "200411251200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E1.0.0.0
-- Editor: Steven Luykx
-- Changes: changes in comment, version is not stepped up"
--
-- REVISION "200401291200Z"
-- DESCRIPTION
-- "Version: 3EC36485EAAA_E1.0.0.0
-- Editor: Rafael Van Driessche
-- Changes: first version for ESAM R1.0 and ESAM R1.1"
--
-- REVISION "200304241200Z"
-- DESCRIPTION
-- "Version: 3EC36485AAAA_E5.0.0.3
-- Editor: Eric De Backer
-- Changes:
-- * eqptBoardInventoryLastFailedTest: change object type to OCTET string
-- (BDFaa50395)"
--
-- REVISION "200303261200Z"
-- DESCRIPTION
-- "Version: 3EC36485AAAA_E5.0.1.0
-- Editor: Koen Van de Weyer
-- Changes:
-- * eqptBoardOperError: add "board-not-licensed" (BDFaa51682)"
--
-- REVISION "200309241200Z"
-- DESCRIPTION
-- "Version: 3EC36485AAAA_E5.0.0.2
-- Editor: Frank Devolder
-- Changes:
-- * Decrease size of eqptHolderDescription from 255 to 127 bytes
-- (BDFaa46015).
-- * Remove eqptHwChangeOccurredTrap & eqptProtChangeOccurredTrap
-- (BDFaa44804).
-- * add initialValue(255) to definition of eqptBoardRestart
-- (BDFaa45317).
--
-- REVISION "200201151200Z"
-- DESCRIPTION
-- "Version: 3EC36485AAAA_E5.0.0.1
-- Editor: Frank Devolder
-- Changes:
-- * eqptHolderAvailStatus: add state "offLine" and remove state
-- "unknown".
-- * eqptBoardSwOverruleStatus: only supported for LSMs.
-- * line-up enum values of:
-- eqptBoardOperError & eqptHolderOperError;
-- eqptBoardAvailStatus & eqptHolderAvailStatus;
-- eqptBoardRestart & eqptAsamRestart.
-- * Add object eqptBoardInventoryLastFailedTest.
-- * eqptBoardRestart: for ACU boards, only a restart without selftest is
-- supported."
--
-- REVISION "200106081200Z"
-- DESCRIPTION
-- "Version: 3EC36485AAAA_E5.0.0.0
-- Editor: Frank Devolder
-- Changes: creation of new Equipment MIB for ASAM R5.0."
--
-- =============================================================================
IMPORTS IpAddress, TimeTicks,
Counter FROM RFC1155-SMI
DisplayString, RowStatus,
TruthValue FROM SNMPv2-TC
asam FROM SYSTEM-MIB
OBJECT-TYPE FROM RFC-1212
InterfaceIndex FROM ITF-MIB
AsamAlarmSeverityType FROM ASAM-ALARM-MIB
AsamNextProfileIndex,
AsamProfileRefCount,
AsamProfilePointer,
AsamProfileIndex,
AsamProfileName,
NetworkTimeInSeconds FROM ASAM-TC-MIB;
-- asam OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6)
-- internet(1) private(4) enterprises(1)
-- alcatel(637) asd(61) asam(1) }
asamEquipmentMIB OBJECT IDENTIFIER ::= { asam 23 }
-- MAX-INDEX ::= 2147483647 (= 7FFFFFFF HEX)
-- Start type definitions ==
EqptHolderIndex ::= INTEGER (1..255)
EqptPowerSupplyIndex ::= INTEGER (1..255)
EqptPowerRftcIndex ::= INTEGER (1..255)
EqptPowerRftcLineStatus ::= INTEGER {
ok(0),
notconnected(1),
highimpedant(2),
earthfault(3)}
EqptHolderIndexOrZero ::= INTEGER (0..255)
EqptSlotIndex ::= INTEGER (1..65535)
EqptCustAlarmProfileOutputType ::= INTEGER {
triggered(1), -- alarm output is triggered
notTriggered(2)} -- alarm output is not triggered
EqptCustAlarmProfilePolarityType ::= INTEGER {
inversed(1), -- inversed alarm polarity
normal(2)} -- normal alarm polarity
EqptPortMappingIndex ::= INTEGER
-- End type definitions ==
eqptAsam OBJECT IDENTIFIER ::= { asamEquipmentMIB 1 }
-- Note on appliques:
--
-- The Equipment MIB is only used to manage appliques that are contained
-- in LT shelves or combo shelves. Appliques that are contained in separate
-- splitter shelves cannot be managed. Therefore, whenever this MIB
-- mentions an "applique", it is implicitly understood that this applique
-- is contained in the applique area of a combo shelf, or that it is the
-- NT-I/O applique in case of an LT shelf.
-- ==================================================================
-- | START ASAM FIELDS |
-- ==================================================================
eqptAsamId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique identifier of the system.
In practice, this attribute contains the serial number of the most
recently equipped SMAS board within the main shelf.
Notice however that there are also shelves in which the SMAS is replaced
by a GFC board (e.g ARAM-B) or even shelves without SMAS/GFC in which
the serial number of the ACU is taken.
This attribute is used internally by the system in case both NTs
start-up simultaneously to determine whether either the database on
NT-A or the database on NT-B should be used as the systems database.
It's not the intention to make this attribute visible to an operator.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: '' UNITS: -"
::= { eqptAsam 1 }
eqptAsamRestart OBJECT-TYPE
SYNTAX INTEGER {
restartWithSelfTest (1),
-- restart with selftest
restartWithoutSelfTest (2),
-- restart without selftest
-- restartFromDefaultPresOAM (3),
-- restart with removal of persistent data, but preserving the
-- management channel configuration data
-- restartFromDefaultTotal (4),
-- restart with removal of all persistent data, including the
-- management channel configuration data
restartHot (5),
-- system hot restart
initialValue (255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to restart the system. The persistent data is preserved.
Contains previous restart reason, if not available it contains value 255.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: initialValue (255) UNITS: -"
::= { eqptAsam 2 }
eqptMaxRacksPerAsam OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is initialized by the system and specifies the maximum
number of racks supported by the system.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptAsam 3 }
eqptMaxShelvesPerRack OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is initialized by the system and specifies the maximum
number of shelves which can be equipped within one rack.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptAsam 4 }
eqptMaxSlotsPerShelf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is initialized by the system and specifies the maximum
number of regular slots supported by one shelf.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..22
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptAsam 5 }
eqptHwNumberOfChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the number of configuration or
status changes in the Equipment MIB objects. This counter is
incremented each time any of the summary table objects change.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptAsam 6 }
eqptProtNumberOfChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the overall number of status
changes in the equipment protection MIB objects. This counter is
incremented each time any of the eqptProtGroupNumberOfChanges
counters is incremented.
ALCATEL NOTE:
SUPPORT:YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptAsam 7 }
eqptRestartNumberOfChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the overall number of status
changes in the eqptBoardRestartNumberOfChanges objects in
eqptBoardTable. This counter is incremented each time any of the
eqptBoardRestartNumberOfChanges counters is incremented.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptAsam 8 }
eqptFanMode OBJECT-TYPE
SYNTAX INTEGER
{
default (0),
eco (1),
protect (2),
classic (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Parameter indicates the actually applied FAN tray mode:
'default': the fan packs run in average mode, predefined thermal margins are
used for defining/adapting the fan speeds
'eco': the fan packs run in 'green' mode, t.i. the most economical mode, minimal
thermal margins wrt default settings
'protect': the fan packs run in a heavy mode, t.i. wider thermal margins wrt
default settings
'classic': fixed speed settings apply wrt the fan - no SW control
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -"
::= { eqptAsam 9 }
-- ==================================================================
-- | STOP ASAM FIELDS |
-- ==================================================================
-- ==================================================================
-- | START HOLDER TABLE |
-- ==================================================================
eqptHolderTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptHolderEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Equipment holder table, representing the system, the racks and
the shelves.
This table contains one row for the system, one row per rack,
and one row per shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 2 }
eqptHolderEntry OBJECT-TYPE
SYNTAX EqptHolderEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment holder table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptHolderId }
::= { eqptHolderTable 1 }
EqptHolderEntry ::= SEQUENCE {
eqptHolderId EqptHolderIndex,
eqptHolderClass INTEGER,
eqptHolderPlannedType DisplayString,
eqptHolderActualType DisplayString,
eqptHolderAdminStatus INTEGER,
eqptHolderOperStatus INTEGER,
eqptHolderOperError INTEGER,
eqptHolderAvailStatus INTEGER,
eqptHolderDescription DisplayString,
eqptHolderContainerId INTEGER,
eqptHolderContainerOffset INTEGER,
eqptHolderMode INTEGER,
eqptHolderSerialNumber DisplayString,
eqptHolderVariant DisplayString,
eqptHolderICScode DisplayString
}
eqptHolderId OBJECT-TYPE
SYNTAX EqptHolderIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Index in equipment holder Table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 1 }
eqptHolderClass OBJECT-TYPE
SYNTAX INTEGER {
mainIqHcl (1), -- main shelf supporting both IQ-based and
-- HCL-based traffic
extIq (2), -- extension shelf supporting only IQ-based traffic
extHcl (3), -- extension shelf supporting only HCL-based traffic
mainEthernet (4), -- main shelf supporting Ethernet-based traffic
extEthernet (5) -- extension shelf supporting Ethernet-based traffic
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Classification of shelves. This object has no meaning for the
system and the rack equipment holders.
Note: for ISAM, only the values mainEthernet (4) and extEthernet (5)
are allowed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: 1..5
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 2 }
eqptHolderPlannedType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string representing the planned type of equipment holder.
If the equipment holder is planned, the string consists of a
mnemonic, identifying the holder type.
This object is only writable for the entries that represent a shelf.
Other entries get a value corresponding to the detected equipment
practice type.
Following values are valid:
System-types:
=============
LAUS Large ASAM US market (6 racks, 3 shelves per rack)
LAEU Large ASAM EU market (6 racks, 3 shelves per rack)
LEEU Large ESAM EU market (7 racks, 4 shelves per rack)
LEUS Large ESAM US market (7 racks, 4 shelves per rack)
LNEU Large New EquipmentPractise EU market(7 racks, 4 shelves
per rack)
LEWW Large ESAM World Wide (7 racks, 4 shelves per rack)
LNWW Large ESAM World Wide (7 racks, 4 shelves per rack)
Rack-types:
===========
ALTR-A ADSL Line Termination Rack version A (US)
ALTR-E ADSL Line Termination Rack version E (ETSI 2200mm)
Shelf-types:
============
<SHELF_MNEMONIC> A shelf of a specific type. Refer to the ETSI
Configurations and US Configurations documents
for the list of shelf types that are supported
in a given system release.
NOT_PLANNED The shelf is not planned.
NOT_ALLOWED Shelf planning is not allowed in this position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -"
::= { eqptHolderEntry 3 }
eqptHolderActualType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string representing the actual equipment holder type.
Following values are possible:
<HOLDER_MNEMONIC> Indicates the detected equipment holder-type.
Uses same mnemonics as described in object
eqptHolderPlannedType.
EMPTY Equipment holder is not detected
UNKNOWN The type of the detected holder is unknown.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 4 }
eqptHolderAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
unlock(1),
lock(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used by the administrator to lock or unlock an equipment holder.
This attribute is only supported for shelves.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 1 UNITS: -"
::= { eqptHolderEntry 5 }
eqptHolderOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute identifies whether or not the equipment holder is
capable of performing its normal functions.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 6 }
eqptHolderOperError OBJECT-TYPE
SYNTAX INTEGER {
no-error(1), -- no-error or admin state = Down
type-mismatch(2),
holder-missing(3),
holder-installation-missing(4),
defense(15)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes for what reason the equipment holder is
not operational. These values correspond with the alarms that are
generated in case of a failure.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4, 15
PERSIST: NO DEFVALUE: 1 UNITS: -"
::= { eqptHolderEntry 7 }
eqptHolderAvailStatus OBJECT-TYPE
SYNTAX INTEGER {
available(1), -- equipment holder is available
failed (3), -- equipment holder is detected but faulty
notInstalled (5), -- equipment holder is not installed
offLine (6) -- equipment holder has been disabled
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the equipment holder is
available or not.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 8 }
eqptHolderDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..127))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Text-field, which can for instance be used to describe the
location of the equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: '' UNITS: -"
::= { eqptHolderEntry 9 }
eqptHolderContainerId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes in which equipment holder the equipment
holder is contained.
This object is only meaningful for racks and shelves, since the
system itself has no containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 10 }
eqptHolderContainerOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes the position of the equipment holder
in the containing equipment holder.
This object is only meaningful for racks and shelves, since the
system itself has no containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 11 }
eqptHolderMode OBJECT-TYPE
SYNTAX INTEGER{
ntbntio-supported(1),
ntbntio-unsupported(2),
ntb-unsupported(3),
ntbntioextlt-unsupported(4),
ntio-unsupported(6),
ngpon-supported(7),
gpon-supported(8),
ngpon-port-reduced(9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "This attribute identifies the holder mode and is used by
both the NEP shelf and the ARAM-E shelf:
ntbntio-supported: this mode works in the same manner as iSAM XD. The
LSM can only be used on LSM slot. NT in NTB is supported. NTIO is
also supported.
ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as
LT slot. So, two more LSM can be supported in this mode. Therefore,
NTIO/NTB board is not supported.
ntb-unsupported: In this mode, NTB slot can be used as LT slot.
So one more LT can be supported in this mode. Therefore, NTB board will
not be supported. This mode is applicable for NFXS-B shelf only.
ntio-unsupported: In this mode, there is no NTIO; the slot can be
used for an LSM.
DEFAULTVALUE: The default Value of the eqptHolderMode depends
on the shelf type. In the case of ARAM-E, default will be ntio-unsupported.
All other shelves will default to ntbntio-supported mode.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: Yes DEFVALUE: See above UNITS: -"
::= { eqptHolderEntry 12 }
eqptHolderSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the serial number of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 13 }
eqptHolderVariant OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the ALU code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 14 }
eqptHolderICScode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the Item Change Status iteration
code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptHolderEntry 15 }
-- ==================================================================
-- | STOP HOLDER TABLE |
-- ==================================================================
-- ==================================================================
-- | START BOARD TABLE |
-- ==================================================================
eqptBoardTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptBoardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table representing the slots of all planned shelves. Each slot
can hold a board of one of the following types: NT, EXT, LSM,
ACU, CTRL, applique.
This table has a row for each slot in each planned shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 3 }
eqptBoardEntry OBJECT-TYPE
SYNTAX EqptBoardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the eqptBoardTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptSlotId }
::= { eqptBoardTable 1 }
EqptBoardEntry ::= SEQUENCE {
eqptSlotId EqptSlotIndex,
eqptSlotPlannedType DisplayString,
eqptSlotActualType DisplayString,
eqptSlotPowerStatus INTEGER,
eqptBoardAdminStatus INTEGER,
eqptBoardOperStatus INTEGER,
eqptBoardOperError INTEGER,
eqptBoardAvailStatus INTEGER,
eqptBoardRestart INTEGER,
eqptBoardSwOverruleStatus INTEGER,
eqptBoardContainerId INTEGER,
eqptBoardContainerOffset INTEGER,
eqptBoardInventoryAlcatelCompanyId DisplayString,
eqptBoardInventoryTypeName DisplayString,
eqptBoardInventoryPBACode DisplayString,
eqptBoardInventoryFPBACode DisplayString,
eqptBoardInventoryICScode DisplayString,
eqptBoardInventoryCLEICode DisplayString,
eqptBoardInventorySerialNumber DisplayString,
eqptBoardInventoryLastFailedTest OCTET STRING (SIZE(4)),
eqptSlotPlannedCapabilityProfile AsamProfilePointer,
eqptBoardCustAlarmProfile AsamProfilePointer,
eqptBoardLastRestartCause INTEGER,
eqptBoardLastRestartTime NetworkTimeInSeconds,
eqptBoardRestartNumberOfChanges Counter,
eqptBoardRelatedMgntEntityIPAddress IpAddress,
eqptBoardRelatedMgntEntityPairedNumber INTEGER,
eqptBoardDualHostIPAddress IpAddress,
eqptBoardDualHostLsmLocation EqptHolderIndexOrZero,
eqptBoardIfSlotId INTEGER,
eqptBoardRestartCountPerLt Counter,
eqptBoardClearRestartCountPerLt TruthValue
}
eqptSlotId OBJECT-TYPE
SYNTAX EqptSlotIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value to identify a slot position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 1 }
eqptSlotPlannedType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is planned in the slot. If the board is planned, the string consists
of a mnemonic that identifies the board-type.
Following mnemonics are valid:
<BOARD_MNEMONIC> A board of a specific type. Refer to the ETSI and
US Configurations documents for the list of boards
that are supported in a given release.
ODM board types are planned with the board mnemonic,
they are treated as unmanaged boards.
EXT_MANAGED The presence of the LT module can be detected but
it is not managed by this NT in the HYNT module.
The LT type must be planned on the other NT.
UNMANAGED Unmanaged board: this means that the presence of
the board can be detected and that the board can
be reset and powered-down but that it is not
possible to establish communication with the board
in software.
NOT_PLANNED No board is planned in the slot.
NOT_ALLOWED Slot planning is not allowed in this position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -"
::= { eqptBoardEntry 2 }
eqptSlotActualType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is actually present in the slot.
Following values are possible:
<BOARD_MNEMONIC> Indicates the detected board-type. Uses same
mnemonics as described in object
eqptSlotPlannedType.
EMPTY No board plugged within this slot.
EXT_MANAGED The presence of the LT module can be detected but
it is not managed by this NT in the HYNT module.
The LT type must be planned on the other NT.
UNMANAGED The type of the detected board is unknown
and the planned board type is UNMANAGED or ODMboardtype.
UNKNOWN The type of the detected board is unknown
and the planned board type is not UNMANAGED
and the planned board type is not EXT_MANAGED.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 3 }
eqptSlotPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
powerUp(1),
powerDown(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used by the operator to power-up or power-down
an LSM slot. This attribute is not supported for other type of slots.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: 1 UNITS: -"
::= { eqptBoardEntry 4 }
eqptBoardAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
unlock(1),
lock(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used by the operator to lock or unlock the board.
This attribute is only supported for the following type of boards:
NT (but notice that the system will refuse a request to lock the NT
of a simplex system), EXT and LSM (if managed). This attribute has
no meaning for an unmanaged or externally managed (EXT_MANAGED) LSM,
for an ACU, CTRL or for an applique. An exception is the NRCD-C, CTRL
board of the FD-REM, that has LT capabilities next to the regular
CTRL capabilities.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: 1 UNITS: -"
::= { eqptBoardEntry 5 }
eqptBoardOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute informs the operator whether the plug-in unit is able
to perform its normal operation.
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 6 }
eqptBoardOperError OBJECT-TYPE
SYNTAX INTEGER {
no-error(1), -- no-error or admin state = Down
type-mismatch(2),
board-missing(3),
board-installation-missing(4),
no-planned-board(5),
waiting-for-sw(6),
init-boot-failed(7),
init-download-failed(8),
init-connection-failed(9),
init-configuration-failed(10),
board-reset-protection(11),
invalid-parameter(12),
temperature-alarm(13),
tempshutdown(14),
defense(15),
board-not-licensed(16),
sem-power-fail(17),
sem-ups-fail(18),
board-in-incompatible-slot(19),
download-ongoing(21),
unknown-error(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes for what reason the board is not operational.
These values correspond with the alarms which are generated in case of
a failure.
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
Default value is no-error, replaced by result from startup sequence.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..15, 255
PERSIST: NO DEFVALUE: 1 UNITS: -"
::= { eqptBoardEntry 7 }
eqptBoardAvailStatus OBJECT-TYPE
SYNTAX INTEGER {
available(1), -- board is available, after successfull selftest
inTest(2), -- during selftest or init, after reset or power up
failed(3), -- error, error in selftest or timeout
powerOff(4), -- board is powered off
notInstalled(5), -- board is not plugged in
offLine(6), -- board has been disabled
dependency(7) -- board cannot operate because some other resource
-- on which it depends is unavailable
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute provides further information regarding the state
of the board. It is set to available after a successfull selftest
of the board (if applicable).
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 8 }
eqptBoardRestart OBJECT-TYPE
SYNTAX INTEGER {
with-selftest(1),
without-selftest(2),
hot-restart(5),
initialValue (255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing a valid value to this object will restart the board in the
specified mode.
This attribute is only supported for the following type of boards:
NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boards, only a
restart without selftest is supported. An exception is the NRCD-C,
FD-REM CTRL board, that has LT capabilities (restart with/without
selftest) next to the regular CTRL capabilities.
Contains previous restart reason, if not available it has value 255.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1, 2, 5, 255
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 9 }
eqptBoardSwOverruleStatus OBJECT-TYPE
SYNTAX INTEGER {
no-overrule(1),
overrule(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to overrule the default software version for this board.
This attribute is only supported for managed LSMs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: NO DEFVALUE: 1 UNITS: -"
::= { eqptBoardEntry 10 }
eqptBoardContainerId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes in which equipment holder the slot
is contained.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 11 }
eqptBoardContainerOffset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute describes the position of the slot in the
containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 12 }
-- The following attributes are used to represent the board inventory data.
-- Board inventory data is retrieved for the following board-types: NT, EXT,
-- managed LSM, ACU, CTRL, applique.
-- Board inventory data is not retrieved for unmanaged ,externally managed
-- (EXT_MANAGED) LSMs and ODM boardtypes.
eqptBoardInventoryAlcatelCompanyId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the company of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 13 }
eqptBoardInventoryTypeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the name of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 14 }
eqptBoardInventoryPBACode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the Alcatel Printed Board Assembly
code of of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 15 }
eqptBoardInventoryFPBACode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the Alcatel Printed Board Assembly
code of the board, which also identifies the boot software.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 16 }
eqptBoardInventoryICScode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the Item Change Status iteration
code of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 17 }
eqptBoardInventoryCLEICode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the (USA) Common Language Equipment
Identification code of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 18 }
eqptBoardInventorySerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the serial number of the board.
Breakdown of a sample serial number is :
sample NANT-D serial number is AA1003ZA028
AA 10 03 ZA028
--- ==== ==========
| | |=====' Production Plant Code
| |
| |==============' Week
|
|====================' Year
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 19 }
eqptBoardInventoryLastFailedTest OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the last failing test by means of 4 numbers, from MSB
to LSB:
- Table number (1 byte)
- Segment number (1 byte)
- Case number (1 byte)
- Check number (1 byte)
As long as there has been no failing selftest, the value of this
object will be 0.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptBoardEntry 20 }
eqptSlotPlannedCapabilityProfile OBJECT-TYPE
SYNTAX AsamProfilePointer
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A pointer to the capability profile that will be used for this
slot. Capability profiles are only applicable for LT cards
that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards.
Planning the profile should always be done at the same moment the
LT/NTIO is planned.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 22 }
eqptBoardCustAlarmProfile OBJECT-TYPE
SYNTAX AsamProfilePointer
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A pointer to the customizable alarms profile which will be
associated to NT for all shelves except FD-REM where the
customizable alarms profile will be associated to master LT.
In redundant NT shelves the profile will be associated to
both NTA and NTB while associating customizable alarms profile
to NTA or NTB.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 23 }
eqptBoardLastRestartCause OBJECT-TYPE
SYNTAX INTEGER {
poweron(1),
unknown(2),
watchdog(3),
coldreset(4),
warmreset(5),
hotreset(6),
hotreload(7),
cleandata(8),
emergencybuild(9),
poweronreset(10),
commitfailure(11),
timezonemodified(12)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute gives the last restart cause for board.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: unknown UNITS: -"
::= { eqptBoardEntry 24 }
eqptBoardLastRestartTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute gives the last restart time.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 25 }
eqptBoardRestartNumberOfChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the number of restart times.
This counter is incremented each time eqptBoardLastRestartTime
changes. Considering future safe, only use default value for
other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 26 }
eqptBoardRelatedMgntEntityIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network address. It is a public OAM IP address related to xVPS. For
single OAM IP is introduced, multi-xVPS boards existing on a same shelf
may use one single OAM IP. This IP is configured on NT which manages
these xVPS boards.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE:
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 27 }
eqptBoardRelatedMgntEntityPairedNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" For single OAM IP is introduced, one public OAM IP can not identify an
xVPS, so community string is introduced. Each active xVPS will have
different community string in one shelf.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE:
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 28 }
eqptBoardDualHostIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Network address. Only applicable for FD REM connected to dual host.
It is the public OAM IP address of the host connecting the Lsm in this
externally managed slot. It is instantiated with default value and
can only be set when the planned type is EXT_MANAGED.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE:
PERSIST: YES DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 29 }
eqptBoardDualHostLsmLocation OBJECT-TYPE
SYNTAX EqptHolderIndexOrZero
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Only applicable for FD REM connected to dual host.
It is the Rack/Shelf identifying the location of this
externally managed slot, within the scope of the host connecting
the Lsm. The slot component is implicitly present in the key.
It is instantiated with default value and can only be set when
the planned type is EXT_MANAGED. The type corresponds to the
type EqptHolderIndex, except for the fact that this field can
be 0, which is the default value.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -"
::= { eqptBoardEntry 30 }
eqptBoardIfSlotId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This object gives the slot's linear number, which could be
used by an external manager to help in mapping a given
IfIndex to a physical slot location. It is a numerical value
that consists of 6 bits. For a slot that does not carry any
interfaces (e.g. applique or NTIO slot), the value is always
'0xFF'.
Note that this linear slot number is persistent across system
restarts, i.e. the same linear slot number will be used for
the same slot even after a restart of the ISAM system.
However, it is not guaranteed that the same linear slot
number will used after a migration to a new release.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0xFF UNITS: -"
::= { eqptBoardEntry 32 }
eqptBoardRestartCountPerLt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the number of restart times per LT.
This counter is incremented each time eqptBoardLastRestartTime
changes.This counter will reset to zero when LT replaced or unplanned.
Note:This counter is Per LT basis. LTs are distinguished based on serialNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: NA"
::= { eqptBoardEntry 33 }
eqptBoardClearRestartCountPerLt OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the eqptBoardRestartCountPerLt counter.
When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared.
A value set to false(2) or other is ignored..
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: FALSE UNITS: NA"
::= { eqptBoardEntry 34 }
-- ==================================================================
-- | STOP BOARD TABLE |
-- ==================================================================
-- ==================================================================
-- | START SHELF SUMMARY TABLE |
-- ==================================================================
eqptShelfSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptShelfSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Shelf summary table, summarizing slot or board related status
changes within each shelf.
This table has one row per planned shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above."
::= { asamEquipmentMIB 4 }
eqptShelfSummaryEntry OBJECT-TYPE
SYNTAX EqptShelfSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the shelf summary table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptHolderId }
::= { eqptShelfSummaryTable 1 }
EqptShelfSummaryEntry ::= SEQUENCE {
eqptShelfHwNumberOfChanges Counter,
eqptShelfSlotSummaryOccupation OCTET STRING,
eqptShelfBoardSummaryAdmin OCTET STRING,
eqptShelfBoardSummaryAvail OCTET STRING,
eqptShelfBoardSummaryOper OCTET STRING,
eqptShelfBoardSummaryTypeMismatch OCTET STRING,
eqptShelfBoardSummaryAlarm OCTET STRING
}
eqptShelfHwNumberOfChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the number of configuration or
status changes for slots/boards within this shelf. This counter
is incremented each time any of the summary table objects of this
shelf changes.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 1 }
eqptShelfSlotSummaryOccupation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap of the occupation of slots (0 = empty, 1 = full)
Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 2 }
eqptShelfBoardSummaryAdmin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap of the administrative state of the boards
(0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 3 }
eqptShelfBoardSummaryAvail OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap of the availability state of the boards (0 = not available,
1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 4 }
eqptShelfBoardSummaryOper OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap of the operational state of the boards (0 = locked,
1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 5 }
eqptShelfBoardSummaryTypeMismatch OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap of the mismatch between the actual board-type and the planned
board-type (0 = mismatch, 1 = no mismatch).
Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 6 }
eqptShelfBoardSummaryAlarm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap of the boards which generated an alarm (0 = alarm,
1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptShelfSummaryEntry 7 }
-- ==================================================================
-- | STOP SHELF SUMMARY TABLE |
-- ==================================================================
eqptProt OBJECT IDENTIFIER ::= { asamEquipmentMIB 5 }
eqptProtNextProtGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains an appropriate value to be used for
eqptProtGroupId when creating entries in the eqptProtGroupTable.
The value 0 indicates that no unassigned entries are available.
After each retrieval, the agent will modify the value to the
next unassigned index.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {eqptProt 1}
-- ==================================================================
-- | START PROTECTIONGROUP TABLE |
-- ==================================================================
eqptProtGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptProtGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table representing groups of protected or protecting elements.
Only one row for NT protection group which will always be created and
cannot be deleted.
From ISAM R4.1.02 the default created NT protection group will be locked.
(before it was unlocked).
From R3.3 onwards, each LT protection group (comprised of 2 adjacent
slots LT n and LT n+1, where n is a odd number), also has a row.
The protection groups are created by default even though
the protection groups are not used.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above "
::= { eqptProt 2 }
eqptProtGroupEntry OBJECT-TYPE
SYNTAX EqptProtGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the eqptProtGroupTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptProtGroupId }
::= { eqptProtGroupTable 1 }
EqptProtGroupEntry ::= SEQUENCE {
eqptProtGroupId INTEGER,
eqptProtGroupType INTEGER,
eqptProtGroupNumberOfChanges Counter,
eqptProtGroupSwitchoverCount Counter,
eqptProtGroupLastSwitchoverReason INTEGER,
eqptProtGroupEpsQuenchfactor TimeTicks,
eqptProtGroupAlarmBitmap INTEGER,
eqptProtGroupAdminStatus INTEGER,
eqptProtGroupAdminProtElement INTEGER,
eqptProtGroupOperProtElement INTEGER,
eqptProtGroupRowStatus RowStatus
}
eqptProtGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value to identify a protection group.
The value 1 is reserved for the NT protection group,
which is always present and cannot be deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptProtGroupEntry 1}
eqptProtGroupType OBJECT-TYPE
SYNTAX INTEGER {
one-plus-one(1),
one-for-N(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attributes distinguishes between 1+1 and 1:N protection groups.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -"
::= { eqptProtGroupEntry 2 }
eqptProtGroupNumberOfChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter which indicates the number of status changes
in this protection group as well as the status changes for the
protecting elements within this group:
eqptProtGroupSwitchoverCount;
eqptProtGroupLastSwitchoverReason;
eqptProtGroupAlarmBitmap;
eqptProtElementStandbyStatus.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProtGroupEntry 3 }
eqptProtGroupSwitchoverCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Wrap around counter for the number of switchovers being performed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -"
::= { eqptProtGroupEntry 4 }
eqptProtGroupLastSwitchoverReason OBJECT-TYPE
SYNTAX INTEGER {
noSwitchOver(1), -- no switch over has been performed yet
forcedActive(2), -- chain is forced active
boardNotPresent(3), -- board is removed or not reachable
extenderChainFailure(4), -- extender chain failure
linkFailure(5), -- link failure
watchDogTimeOut(6), -- redundancy watchdog
fileSystemCorrupt(7), -- curruption of file system
configurationMismatch(8), -- mismatch in boardType or Swversion
boardUnplanned(9), -- board has been unplanned
boardLocked(10), -- board has been locked
shelfDefense(11), -- shelf-error detected by defense
revertiveSwitchOver(12), -- switchover because protected board is
-- operational again (in case of 1:N)
lanxFailure(13), -- lanx not alive
lanxHwFailure(14), -- active Lanx has detected a
-- hardware failure
lanxSdkFailure(15), -- active Lanx has detected a
-- SDK-failure
dpoeAppFailure(16), -- active DPoE has detected application failure
dpoeUnreachable(17) -- DPoE is not reachable
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the reason of the last switch over.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptProtGroupEntry 5 }
eqptProtGroupEpsQuenchfactor OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains a timervalue in 1/100 sec. The EpsQuench timer
is used to prevent continuous switch-overs in case of unstable EPS.
Value equal to zero means the quenching mechanism is disabled.
Configuration of the EPS quenchfactor has mainly be foreseen for
test purposes. Operators should preferably not be able to
reconfigure the default value.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 1440000 UNITS: 0.01 seconds"
DEFVAL { 1440000} -- 4 hours
::= { eqptProtGroupEntry 6 }
eqptProtGroupAlarmBitmap OBJECT-TYPE
SYNTAX INTEGER (1..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status bitmap:
bit 0 set means No defect at all
bit 1 : if bit set, Standby degradation alarm is set
(excludes bit 0 setting)
bit 2 .. 31 : reserved for future extensions.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0x00000001 UNITS: -"
::= { eqptProtGroupEntry 7 }
eqptProtGroupAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
unlock(1),
lock(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used by the administrator to disable or enable protection within
that protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: unlock(1) UNITS: -"
::= { eqptProtGroupEntry 8 }
eqptProtGroupAdminProtElement OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Only supported for 1:N protection groups. In case of a forced
switchover to the spare element, this attribute is used to specify
the element to be protected. The value 0 means that no element is
specified.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptProtGroupEntry 9 }
eqptProtGroupOperProtElement OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Only supported for 1:N protection groups. Indicates which element
is currently protected by the spare element. The value 0 means that
currently the spare element is not protecting any element.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProtGroupEntry 10 }
eqptProtGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Entries in the eqptProtGroupTable can only be created at once, by
specifying eqptProtGroupRowStatus=createAndGo(4).
For NT protection group, if all values are valid then the
entry is made active(1). For LT protection group, if the group
is in service then the entry is made active(1). If the group
is not in service then the entry is made notInService(2).
If the object is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -"
::= { eqptProtGroupEntry 11 }
-- ==================================================================
-- | STOP PROTECTIONGROUP TABLE |
-- ==================================================================
-- ==================================================================
-- | START PROTECTIONELEMENT TABLE |
-- ==================================================================
eqptProtElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptProtElementEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table representing the protected or protecting elements.
An element can be either a board or an extension chain. Both are
identified by the corresponding slot identifier (extension chain
is identified by slot of corresponding NT board).
This table has only two rows from ISAM R2.2 to R3.2.
From R3.3 onwards, this table has a row for each slots in the
main shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above "
::= { eqptProt 3 }
eqptProtElementEntry OBJECT-TYPE
SYNTAX EqptProtElementEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the eqptProtElementTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptSlotId }
::= { eqptProtElementTable 1 }
EqptProtElementEntry ::= SEQUENCE {
eqptProtElementGroupId INTEGER,
eqptProtElementType INTEGER,
eqptProtElementStandbyStatus INTEGER,
eqptProtElementRedcyCtrlStatus INTEGER,
eqptProtElementRowStatus RowStatus,
eqptProtElementStandbyStatuschangeReason INTEGER
}
eqptProtElementGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attributes identifies the protection group to which this
element belongs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptProtElementEntry 1}
eqptProtElementType OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
spare(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to distinguish between normal elements of
a protection group and the spare element of a 1:N protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: normal(1) UNITS: -"
::= { eqptProtElementEntry 2}
eqptProtElementStandbyStatus OBJECT-TYPE
SYNTAX INTEGER {
providing-service(1), --active and providing service
hot-standby(2), --standby and ready to become active
cold-standby(3), --standby but not synchronized
idle(4) --not able to protect peer board
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute reflects the standby status of the protection
group element.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProtElementEntry 3}
eqptProtElementRedcyCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
forced-active(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to force a switchover between elements of
a protection group or to keep one of the elements active.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: normal(1) UNITS: -"
::= { eqptProtElementEntry 4}
eqptProtElementRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Entries in the eqptProtElementTable can only be created at once,
by specifying eqptProtEelementRowStatus=createAndGo(4). If all
values are valid then the entry is made active(1). If the object
is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -"
::= { eqptProtElementEntry 5}
eqptProtElementStandbyStatuschangeReason OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- standby state is hot standby
-- or not applicable (default value)
protectionGroupLocked(1), -- redundancy is not enabled
forcedActive(2), -- active board is put to forced active
peerLinkUnAvailable(3), -- standby NT link is not available
peerLocked(4), -- standby board is locked
peerNotPlanned(5), -- standby board is not planned
peerNotPluggedIn(6), -- standby board is not plugged in
databaseNotInSync(7), -- data base is not synchronized
lanxDynamicDataNotSynced(8), -- lanx has not synchronized its data
lanxSdkFailure(9), -- standby Lanx has detected a
-- non recoverable SDK-failure
lanxRecovSdkFailure(10), -- standby Lanx has deteced a
-- recoverable SDK-failure
lanxHwFailure(11), -- standby Lanx has deteced a hardware failure
lanxDynDataSyncFailure(12), -- standby lanx could not
-- synchronize its dynamic data
lanxStaticSyncFailure(13), -- standby lanx could not
-- synchronize its static data
lanxPeerCommFailure(14), -- standby Lanx has lost communication
-- with the active lanx
lanxFailure(15), -- standby lanx not alive
linkGroupNotAvailable(16), -- link group not available
ltNotEnabled(17), -- for LT redundancy : LT not enabled
lanxHiGigFailure(18), -- lanx (act or stb has detected a HiGiG
-- failure
lanxReconcileFailure(19), -- lanx has detected a failure in the
-- reconcile phase (a.k.a. bulk sync phase)
lanxDiscoveryFailure(20), -- act lanx is not able to detect the mate
-- although the HiGig is up and running.
dpoeAppFailure(21), -- standby DPoE has detected application
-- failure
dpoeCommFailure(22), -- standby DPoE has lost communication with
-- active DPoE
dpoeSyncFailure(23), -- standby DPoE could not do synchronization
-- with active DPoE
dpoeUnreachable(24) -- standby DPoE is not reachable
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute reflects the reason why the standby status of the protection group element has changed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..24
PERSIST: NO DEFVALUE: none(0) UNITS: -"
::= { eqptProtElementEntry 6}
-- ==================================================================
-- | STOP PROTECTIONELEMENT TABLE |
-- ==================================================================
eqptProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 6 }
-- ==================================================================
-- | START PROFILE TABLE |
-- ==================================================================
eqptProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table holding the mapping between the profileId and the corresponding
profile name.
This table has a row for every profile in the system.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { eqptProfile 1 }
eqptProfileEntry OBJECT-TYPE
SYNTAX EqptProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the eqptProfileTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptProfileId }
::= { eqptProfileTable 1 }
EqptProfileEntry ::= SEQUENCE {
eqptProfileId AsamProfileIndex,
eqptProfileName AsamProfileName,
eqptProfileDescription DisplayString
}
eqptProfileId OBJECT-TYPE
SYNTAX AsamProfileIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value identifying a profile.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptProfileEntry 1 }
eqptProfileName OBJECT-TYPE
SYNTAX AsamProfileName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The corresponding name for a given profile id.
The name corresponding to the ProfileId must also be unique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProfileEntry 2 }
eqptProfileDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A short description for the given profile, explaining the
key attributes.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProfileEntry 3 }
-- ==================================================================
-- | STOP PROFILE TABLE |
-- ==================================================================
-- ==================================================================
-- | START PROFILE APPLICABILITY TABLE |
-- ==================================================================
eqptProfileApplicabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptProfileApplicabilityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table lists for every defined profile in the system for
which boards it is applicable.
One profile can be applicable for multiple board types.
Multiple profiles can be applicable for the same board type.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { eqptProfile 2 }
eqptProfileApplicabilityEntry OBJECT-TYPE
SYNTAX EqptProfileApplicabilityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the eqptProfileApplicabilityTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptProfileId, eqptBoardType }
::= { eqptProfileApplicabilityTable 1 }
EqptProfileApplicabilityEntry ::= SEQUENCE {
eqptBoardType DisplayString,
eqptDefaultProfile TruthValue
}
eqptBoardType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string representing the board for which the profile is applicable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProfileApplicabilityEntry 1 }
eqptDefaultProfile OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag indicating if this is the default profile for a specific
board type.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptProfileApplicabilityEntry 2 }
-- ==================================================================
-- | STOP PROFILE APPLICABILITY TABLE |
-- ==================================================================
eqptTestChainTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptTestChainEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table contains the test chain configuration indicating
which shelf is connected to the TAP_UP or whether an external
test head is connected to the TAP_UP. This table has one row
for each planned shelf.
ALCATEL NOTE:
TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 7 }
eqptTestChainEntry OBJECT-TYPE
SYNTAX EqptTestChainEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the eqptTestChainTable."
INDEX { eqptHolderId }
::= { eqptTestChainTable 1 }
EqptTestChainEntry ::= SEQUENCE {
eqptTestChainShelfToTapUp INTEGER,
eqptTestChainExtTestHeadToTapUp INTEGER
}
eqptTestChainShelfToTapUp OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A unique value to identify a shelf position which is connected
to the TAP_UP. The value '0' (default value) indicates that it
is not connected. This parameter is used if
eqptTestChainExtTestHeadToTapUp is set to '1' (i.e., 'no') and
is ignored if eqptTestChainExtTestHeadToTapUp is set to '2'
(i.e., 'yes').
ALCATEL NOTE:
ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES
RANGE: DEP / 0 plus the range of eqptHolderId of the shelves.
DEFVALUE: 0 / this means that no shelf is configured to be
connected to the TAP_UP.
UNITS: NA SPARSE: NO DESCR: NA
"
::= { eqptTestChainEntry 1 }
eqptTestChainExtTestHeadToTapUp OBJECT-TYPE
SYNTAX INTEGER {
no (1),
yes (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter is used to indicate whether an external test
head is connected to the TAP_UP.
no (1): no external test head is connected to the TAP_UP.
yes (2): an external test head is connected to the TAP_UP.
ALCATEL NOTE:
ACCESS: NA USAGE: OPT PERSIST: YES
INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1
UNITS: NA SPARSE: NO DESCR: NA
"
::= { eqptTestChainEntry 2 }
eqptCustAlarmProfile OBJECT IDENTIFIER ::= { asamEquipmentMIB 8 }
-- ==================================================================
-- | START CUSTOMIZABLE ALARMS PROFILE TABLE |
-- ==================================================================
eqptCustAlarmProfileIndexNext OBJECT-TYPE
SYNTAX AsamNextProfileIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains an appropriate value to be used for
eqptCustAlarmProfileIndex
when creating entries in the associated profile table.
The value 0 indicates that no unassigned entries are
available. To obtain the profile index value for a new
entry, the manager issues a management protocol retrieval
operation to obtain the current value of this object.
After each retrieval, the agent should modify the value to
the next unassigned index."
::= { eqptCustAlarmProfile 1 }
eqptCustAlarmProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptCustAlarmProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table representing the configurable attributes of the customizable
alarms : a description, and the corresponding Alarm Outputs to be
activated when this alarm occurs.
This table has a row for each external alarms profile. It offers data
for a maximum of 5 external alarms. Alarms that are not defined for
a particular profile, need to contain default values in the fields
corresponding to that alarm number. Independent of the alarm number,
the name of the profile is also present, as well as the row status.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { eqptCustAlarmProfile 2}
eqptCustAlarmProfileEntry OBJECT-TYPE
SYNTAX EqptCustAlarmProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the eqptCustAlarmProfileTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptCustAlarmProfileIndex }
::= { eqptCustAlarmProfileTable 1 }
EqptCustAlarmProfileEntry ::= SEQUENCE {
eqptCustAlarmProfileIndex AsamProfileIndex,
eqptCustAlarmProfileName AsamProfileName,
eqptCustAlarmProfileUsedStatus AsamProfileRefCount,
eqptCustAlarmProfileRowStatus RowStatus,
eqptCustAlarmProfileMnemonic1 DisplayString,
eqptCustAlarmProfileDescription1 DisplayString,
eqptCustAlarmProfileVisibleOutput1 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfileAudibleOutput1 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfilePolarity1 EqptCustAlarmProfilePolarityType,
eqptCustAlarmProfileSeverity1 AsamAlarmSeverityType,
eqptCustAlarmProfileMnemonic2 DisplayString,
eqptCustAlarmProfileDescription2 DisplayString,
eqptCustAlarmProfileVisibleOutput2 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfileAudibleOutput2 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfilePolarity2 EqptCustAlarmProfilePolarityType,
eqptCustAlarmProfileSeverity2 AsamAlarmSeverityType,
eqptCustAlarmProfileMnemonic3 DisplayString,
eqptCustAlarmProfileDescription3 DisplayString,
eqptCustAlarmProfileVisibleOutput3 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfileAudibleOutput3 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfilePolarity3 EqptCustAlarmProfilePolarityType,
eqptCustAlarmProfileSeverity3 AsamAlarmSeverityType,
eqptCustAlarmProfileMnemonic4 DisplayString,
eqptCustAlarmProfileDescription4 DisplayString,
eqptCustAlarmProfileVisibleOutput4 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfileAudibleOutput4 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfilePolarity4 EqptCustAlarmProfilePolarityType,
eqptCustAlarmProfileSeverity4 AsamAlarmSeverityType,
eqptCustAlarmProfileMnemonic5 DisplayString,
eqptCustAlarmProfileDescription5 DisplayString,
eqptCustAlarmProfileVisibleOutput5 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfileAudibleOutput5 EqptCustAlarmProfileOutputType,
eqptCustAlarmProfilePolarity5 EqptCustAlarmProfilePolarityType,
eqptCustAlarmProfileSeverity5 AsamAlarmSeverityType
}
eqptCustAlarmProfileIndex OBJECT-TYPE
SYNTAX AsamProfileIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Customizale Alarms Profile Index.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptCustAlarmProfileEntry 1 }
eqptCustAlarmProfileName OBJECT-TYPE
SYNTAX AsamProfileName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A textual name uniquely identifying this profile.
Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptCustAlarmProfileEntry 2 }
eqptCustAlarmProfileUsedStatus OBJECT-TYPE
SYNTAX AsamProfileRefCount
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of entities using this profile. If the
reference count is greater than 0, then this profile is 'in use',
and may NOT be deleted. If the value is 0, then this profile is
'not in use', and can be deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptCustAlarmProfileEntry 3 }
eqptCustAlarmProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Entries in the eqptCustAlarmProfileTable can only be created at
once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4).
If all values are valid then the entry is made active(1). If the
object is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -"
::= { eqptCustAlarmProfileEntry 4 }
eqptCustAlarmProfileMnemonic1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 1.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
::= { eqptCustAlarmProfileEntry 5 }
eqptCustAlarmProfileDescription1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the customizable alarm, for given
Profile Index, for external alarm number 1.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
::= { eqptCustAlarmProfileEntry 6 }
eqptCustAlarmProfileVisibleOutput1 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 7 }
eqptCustAlarmProfileAudibleOutput1 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 8 }
eqptCustAlarmProfilePolarity1 OBJECT-TYPE
SYNTAX EqptCustAlarmProfilePolarityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 9 }
eqptCustAlarmProfileSeverity1 OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the severity of the alarm,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -"
::= { eqptCustAlarmProfileEntry 10 }
eqptCustAlarmProfileMnemonic2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 2.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
::= { eqptCustAlarmProfileEntry 11 }
eqptCustAlarmProfileDescription2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the customizable alarm, for given
Profile Index, for external alarm number 2.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
::= { eqptCustAlarmProfileEntry 12 }
eqptCustAlarmProfileVisibleOutput2 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 13 }
eqptCustAlarmProfileAudibleOutput2 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 14 }
eqptCustAlarmProfilePolarity2 OBJECT-TYPE
SYNTAX EqptCustAlarmProfilePolarityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2), UNITS: -"
::= { eqptCustAlarmProfileEntry 15 }
eqptCustAlarmProfileSeverity2 OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the severity of the alarm,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -"
::= { eqptCustAlarmProfileEntry 16 }
eqptCustAlarmProfileMnemonic3 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 3.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
::= { eqptCustAlarmProfileEntry 17 }
eqptCustAlarmProfileDescription3 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the customizable alarm, for given
Profile Index, for external alarm number 3.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
::= { eqptCustAlarmProfileEntry 18 }
eqptCustAlarmProfileVisibleOutput3 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 19 }
eqptCustAlarmProfileAudibleOutput3 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 20 }
eqptCustAlarmProfilePolarity3 OBJECT-TYPE
SYNTAX EqptCustAlarmProfilePolarityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 21 }
eqptCustAlarmProfileSeverity3 OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the severity of the alarm,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -"
::= { eqptCustAlarmProfileEntry 22 }
eqptCustAlarmProfileMnemonic4 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 4.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
::= { eqptCustAlarmProfileEntry 23 }
eqptCustAlarmProfileDescription4 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the customizable alarm, for given
Profile Index, for external alarm number 4.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
::= { eqptCustAlarmProfileEntry 24 }
eqptCustAlarmProfileVisibleOutput4 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 25 }
eqptCustAlarmProfileAudibleOutput4 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 26 }
eqptCustAlarmProfilePolarity4 OBJECT-TYPE
SYNTAX EqptCustAlarmProfilePolarityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 27 }
eqptCustAlarmProfileSeverity4 OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the severity of the alarm,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -"
::= { eqptCustAlarmProfileEntry 28 }
eqptCustAlarmProfileMnemonic5 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 5.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -"
::= { eqptCustAlarmProfileEntry 29 }
eqptCustAlarmProfileDescription5 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The description of the customizable alarm, for given
Profile Index, for external alarm number 5.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -"
::= { eqptCustAlarmProfileEntry 30 }
eqptCustAlarmProfileVisibleOutput5 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 31 }
eqptCustAlarmProfileAudibleOutput5 OBJECT-TYPE
SYNTAX EqptCustAlarmProfileOutputType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 32 }
eqptCustAlarmProfilePolarity5 OBJECT-TYPE
SYNTAX EqptCustAlarmProfilePolarityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -"
::= { eqptCustAlarmProfileEntry 33 }
eqptCustAlarmProfileSeverity5 OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shows the severity of the alarm,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -"
::= { eqptCustAlarmProfileEntry 34 }
-- ==================================================================
-- | STOP CUSTOMIZABLE ALARMS PROFILE TABLE |
-- ==================================================================
-- ==================================================================
-- | START CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE |
-- ==================================================================
eqptCustAlarmProfileMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptCustAlarmProfileMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table listing the profile name to profile Index
Mapping."
::= { eqptCustAlarmProfile 3}
eqptCustAlarmProfileMappingEntry OBJECT-TYPE
SYNTAX EqptCustAlarmProfileMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) representing the Customizable Alarm Profile
Name to Index mapping. The system automatically creates an entry in
this table for each corresponding entry (custAlarm-profile) created
in the eqptCustAlarmProfileTable. Similarly, when a profile is
deleted, the corresponding entry in this table is also automatically
deleted by the system."
INDEX {eqptCustAlarmProfileMappingName }
::= {eqptCustAlarmProfileMappingTable 1}
EqptCustAlarmProfileMappingEntry ::= SEQUENCE {
eqptCustAlarmProfileMappingName AsamProfileName,
eqptCustAlarmProfileMappingIndex AsamProfileIndex
}
eqptCustAlarmProfileMappingName OBJECT-TYPE
SYNTAX AsamProfileName
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A textual name uniquely identifying this profile.
This name has to be unique within the assigned scope.
Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptCustAlarmProfileMappingEntry 1 }
eqptCustAlarmProfileMappingIndex OBJECT-TYPE
SYNTAX AsamProfileIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Customizale Alarms Profile Index.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: -"
::= { eqptCustAlarmProfileMappingEntry 2 }
-- ==================================================================
-- | STOP CUSTOMIZABLE ALARMS PROFILE MAPPING TABLE |
-- ==================================================================
-- ==================================================================
-- | START MTA FIELD |
-- ==================================================================
eqptMtaTest OBJECT IDENTIFIER ::= { asamEquipmentMIB 9 }
eqptMtaTestHeadType OBJECT-TYPE
SYNTAX INTEGER {
four-wire(1),
two-wire(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"setting the MTA test head type, four-wire mode or two-wire mode.
This object should be consistent with external test head equipment,
MTA subsystem will operate different relays based on this object.
MTA commands will have differentiation between these two mode.
ALCATEL NOTE:
ACCESS: NA USAGE: OPT PERSIST: YES
INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1
UNITS: NA SPARSE: NO DESCR: NA"
::= { eqptMtaTest 1 }
-- ==================================================================
-- | STOP MTA FIELD |
-- ==================================================================
-- ==================================================================
-- | START BOARD THERMAL SENSOR TABLE |
-- ==================================================================
eqptBoardThermalSensorTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptBoardThermalSensorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table representing the actual value and thresholds of Thermal Sensor(s) on boards.
One entry corresponds to each sensor on board.
The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 10 }
eqptBoardThermalSensorEntry OBJECT-TYPE
SYNTAX EqptBoardThermalSensorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment thermal sensor table on boards
ALCATEL NOTE:
SUPPORT: YES"
INDEX {eqptSlotId, eqptBoardThermalSensorId}
::= {eqptBoardThermalSensorTable 1}
EqptBoardThermalSensorEntry ::= SEQUENCE{
eqptBoardThermalSensorId INTEGER,
eqptBoardThermalSensorActualTemperature INTEGER,
eqptBoardThermalSensorTcaThresholdLow INTEGER,
eqptBoardThermalSensorTcaThresholdHigh INTEGER,
eqptBoardThermalSensorShutdownThresholdLow INTEGER,
eqptBoardThermalSensorShutdownThresholdHigh INTEGER
}
eqptBoardThermalSensorId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of thermal sensors on board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..15
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptBoardThermalSensorEntry 1}
eqptBoardThermalSensorActualTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual Temperature value read from thermal sensor on board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: -40..150
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
::={ eqptBoardThermalSensorEntry 2}
eqptBoardThermalSensorTcaThresholdLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Low Tca threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
::= { eqptBoardThermalSensorEntry 3}
eqptBoardThermalSensorTcaThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"High Tca threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
::={ eqptBoardThermalSensorEntry 4}
eqptBoardThermalSensorShutdownThresholdLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Low Shutdown threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
::={ eqptBoardThermalSensorEntry 5}
eqptBoardThermalSensorShutdownThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"High Shutdown threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius"
::={ eqptBoardThermalSensorEntry 6}
-- ==================================================================
-- | STOP BOARD THERMAL SENSOR TABLE |
-- ==================================================================
-- ==================================================================
-- | START PORTMAPPING TABLE |
-- ==================================================================
eqptPortMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPortMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Equipment PortMapping table, showing the mapping between logical ports
and physical ports (faceplate numbering).
This table contains one row per logical port on the xHUB.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 13 }
eqptPortMappingEntry OBJECT-TYPE
SYNTAX EqptPortMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment PortMapping table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptPortMappingLogPortNbr }
::= { eqptPortMappingTable 1 }
EqptPortMappingEntry ::= SEQUENCE {
eqptPortMappingLogPortNbr EqptPortMappingIndex,
eqptPortMappingLogPortType INTEGER,
eqptPortMappingPhyPortSlot EqptSlotIndex,
eqptPortMappingPhyPortType INTEGER,
eqptPortMappingPhyPortNbr INTEGER,
eqptPortMappingLSMSlot EqptSlotIndex,
eqptPortMappingChanges Counter
}
eqptPortMappingLogPortNbr OBJECT-TYPE
SYNTAX EqptPortMappingIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Index in equipment PortMapping Table: corresponds to the logical
port id on the xHUB.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPortMappingEntry 1 }
eqptPortMappingLogPortType OBJECT-TYPE
SYNTAX INTEGER {
uplink (1), --
downlink (2), --
hostlink (3), --
internal (4) --
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The logical port type corresponds to the link classification.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPortMappingEntry 2 }
eqptPortMappingPhyPortSlot OBJECT-TYPE
SYNTAX EqptSlotIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The equipment slot index of the physical port.
This slot will point to either a NT or NTIO slot position.
This field is not applicable for hostlinks or internal, in which case it gets
the value 0xFFFF
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptPortMappingEntry 3 }
eqptPortMappingPhyPortType OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(1),
sfp(2),
xfp(3),
vp(5),
eth(10),
mcast(11),
ai(12),
ieee(13),
cfp(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physcial port type.
This field is not applicable for hostlinks.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptPortMappingEntry 4 }
eqptPortMappingPhyPortNbr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The pysical port number, which corresponds to the faceplate number
of the sfp/xfp port.
This field is not applicable for hostlinks or internal, in which case it gets
the value 0xFF.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptPortMappingEntry 5 }
eqptPortMappingLSMSlot OBJECT-TYPE
SYNTAX EqptSlotIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The equipment slot index of the corresponding LSM slot.
This field is only applicable for hostlinks, and downlinks to which
a remote LSM slot is assigned. In other cases it gets the value
0xFFFF.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptPortMappingEntry 6 }
eqptPortMappingChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { eqptPortMappingEntry 7}
eqptPortMappingGlobalChangeCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX.
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
PERSIST: NO DEFVALUE: 0 UNITS: -"
::= { asamEquipmentMIB 14 }
-- ==================================================================
-- | STOP PORTMAPPING TABLE |
-- ==================================================================
-- ==================================================================
-- | START ANY-TO-ANY PORTPROTECTION TABLE |
-- ==================================================================
eqptPortProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPortProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the port protection groups"
::= { asamEquipmentMIB 15 }
eqptPortProtectionEntry OBJECT-TYPE
SYNTAX EqptPortProtectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry represents a protection group which consists of two
ports. These two ports can be on the same LT board, or on
different LT's."
INDEX { eqptPortProtectionPortId }
::= { eqptPortProtectionTable 1 }
EqptPortProtectionEntry ::= SEQUENCE {
eqptPortProtectionPortId InterfaceIndex,
eqptPortProtectionRowStatus RowStatus,
eqptPortProtectionPairedPortId InterfaceIndex,
eqptPortProtectionPortStatus INTEGER,
eqptPortProtectionPairedPortStatus INTEGER,
eqptPortProtectionSwitchCommand InterfaceIndex,
eqptPortProtectionLastSwitchReason INTEGER,
eqptPortProtectionNumberOfSwitchovers INTEGER
}
eqptPortProtectionPortId OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each row is indexed by the IfIndex of the
primary port of the protection group, the one which
is protected.
Only PON ports can be selected."
::= { eqptPortProtectionEntry 1 }
eqptPortProtectionRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"All rows instantiated using 'create-and-go' to
mate 2 ports in a protection group. Set to 'destroy' to
eliminate the protection group.
RULE 1 - Cannot create a protection group on an LT card
that doesn't support any-to-any redundancy.
RULE 2 - Cannot mate two ports in a protection group if
the paired port has already one or more
interface(s) defined on top of the physical link
interface.
RULE 3 - Cannot delete a protection group if paired
port is Admin UP."
::= { eqptPortProtectionEntry 2 }
eqptPortProtectionPairedPortId OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This attribute represents the IfIndex of the paired
port. Only PON ports can be selected.
Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex must represent a real port.
2) PON cannot have any provisioned (planned) ONTs.
3) Cannot mate a PON with itself.
4) Cannot mate with a PON that is already mated in a
protection scheme."
::= { eqptPortProtectionEntry 3 }
eqptPortProtectionPortStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This attribute represents the status of the primary port.
Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system is NOT using the port for
transmission.
Up - means the port is capable of being used for
transmission/reception.
Down - means the port is NOT capable of being used for
transmission/reception (this includes a port that is
ADMIN down as well as a port that is down due to an
operational fault).
Enumerations are as follows:
1 = Active Up
2 = Active Down
3 = Inactive Up
4 = Inactive Down"
::= { eqptPortProtectionEntry 4 }
eqptPortProtectionPairedPortStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This attribute represents the status of the paired
port.
Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system is NOT using the port for
transmission.
Up - means the port is capable of being used for
transmission/reception.
Down - means the port is NOT capable of being used for
transmission/reception (this includes a port that is
ADMIN down as well as a port that is down due to an
operational fault).
Enumerations are as follows:
1 = Active Up
2 = Active Down
3 = Inactive Up
4 = Inactive Down"
::= { eqptPortProtectionEntry 5 }
eqptPortProtectionSwitchCommand OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS write-only
STATUS mandatory
DESCRIPTION
" This attribute represents the IfIndex of the desired port
to switch over to.
Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex must represent a real port.
2) IfIndex must be part of a protection group.
3) IfIndex must be either the primary or the paired port
of the protection group on which the switchover is
triggered."
::= { eqptPortProtectionEntry 6 }
eqptPortProtectionLastSwitchReason OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This attribute contains the reason for the last port
switchover (if any).
0 = No switch has occurred (since last LT startup).
1 = Manual switch due to port Admin State change.
2 = Manual switch due to usage of Switch command.
3 = Automatic switch due to system determination.
4 = Automatic switch due to LT failure."
::= { eqptPortProtectionEntry 7 }
eqptPortProtectionNumberOfSwitchovers OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This attribute contains the number of switchovers since
last LT startup."
::= { eqptPortProtectionEntry 8 }
-- ==================================================================
-- | STOP ANY-TO-ANY PORTPROTECTION TABLE |
-- ==================================================================
-- ==================================================================
-- | START ANY-TO-ANY PORTPROTECTION LOOKUP TABLE |
-- ==================================================================
eqptPortProtectionLookupTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPortProtectionLookupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the lookup port protection groups"
::= { asamEquipmentMIB 16 }
eqptPortProtectionLookupEntry OBJECT-TYPE
SYNTAX EqptPortProtectionLookupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry represents a lookup protection group which consists
of two ports. The key is either a primary or a paired port
in the eqptPortProtectionTable."
INDEX { eqptPortProtectionLookupPortId }
::= { eqptPortProtectionLookupTable 1 }
EqptPortProtectionLookupEntry ::= SEQUENCE {
eqptPortProtectionLookupPortId InterfaceIndex,
eqptPortProtectionLookupPrimaryPortId InterfaceIndex
}
eqptPortProtectionLookupPortId OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each row is indexed by the IfIndex of a port in a
protection group, either a primary or a paired port.
Only PON ports can be selected."
::= { eqptPortProtectionLookupEntry 1 }
eqptPortProtectionLookupPrimaryPortId OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This attribute represents the IfIndex of the primary
port of the protection group to which the key port
belongs.
Only PON ports can be selected."
::= { eqptPortProtectionLookupEntry 2 }
-- ==================================================================
-- | STOP ANY-TO-ANY PORTPROTECTION LOOKUP TABLE |
-- ==================================================================
-- ==================================================================
-- | START PLANNED RESOURCE TABLE |
-- ==================================================================
eqptBoardPlannedResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptBoardPlannedResourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table representing the actual values of configured hardware
resources on boards.
This table only displays entries for resources on the boards
that support this view. These are boards for which the relation
between HW resource consumption and system configuration is not
trivial.
If the board is not supporting this view, then no entries will
be displayed. The board does not physically need to be present
for displaying the resources.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 17 }
eqptBoardPlannedResourceEntry OBJECT-TYPE
SYNTAX EqptBoardPlannedResourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment planned resource table
ALCATEL NOTE:
SUPPORT: YES"
INDEX {eqptSlotId, eqptBoardPlannedResourceId}
::= {eqptBoardPlannedResourceTable 1}
EqptBoardPlannedResourceEntry ::= SEQUENCE{
eqptBoardPlannedResourceId INTEGER,
eqptBoardPlannedResourceCurrentValue INTEGER,
eqptBoardPlannedResourceMaxValue INTEGER,
eqptBoardPlannedResourceDescription DisplayString
}
eqptBoardPlannedResourceId OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Index of the planned resource for a board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptBoardPlannedResourceEntry 1}
eqptBoardPlannedResourceCurrentValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual planned value for the resource
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: - "
::={ eqptBoardPlannedResourceEntry 2}
eqptBoardPlannedResourceMaxValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum value that the board supports for this resource.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: - "
::={ eqptBoardPlannedResourceEntry 3}
eqptBoardPlannedResourceDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string describing the planned resource for this board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: - "
::={ eqptBoardPlannedResourceEntry 4}
-- ==================================================================
-- | STOP PLANNED RESOURCE TABLE |
-- ==================================================================
-- ==================================================================
-- | START POWER MANAGEMENT TABLE |
-- ==================================================================
eqptPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Equipment power table, representing the power management objects per
system, rack or shelf.
This table contains one row for the system, rack or shelf that is
subject to power management. In other cases no entry is instantiated.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 18 }
eqptPowerEntry OBJECT-TYPE
SYNTAX EqptPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment power table.
An entry will be instantiated for a system/rack or shelf with active
power management functionality.
At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned
RANI-B/RPNI-B comply to this requirement.
ALCATEL NOTE:
SUPPORT: YES "
INDEX { eqptPowerId }
::= { eqptPowerTable 1 }
EqptPowerEntry ::= SEQUENCE {
eqptPowerId EqptHolderIndex,
eqptPowerAdminMode INTEGER,
eqptPowerOperMode INTEGER,
eqptPowerBatType INTEGER,
eqptPowerBatStartCapacity INTEGER,
eqptPowerBatPlannedLifetime INTEGER,
eqptPowerBatState INTEGER,
eqptPowerBatFailure INTEGER,
eqptPowerBatTemperature INTEGER,
eqptPowerBatActualCapacity INTEGER,
eqptPowerBatDefenseMode INTEGER,
eqptPowerBatDefenseThreshold INTEGER,
eqptPowerACState INTEGER,
eqptPowerACFailure INTEGER,
eqptPowerNDCaState INTEGER,
eqptPowerNDCaFailure INTEGER,
eqptPowerNDCbState INTEGER,
eqptPowerNDCbFailure INTEGER,
eqptPowerLDCaState INTEGER,
eqptPowerLDCaFailure INTEGER,
eqptPowerLDCbState INTEGER,
eqptPowerLDCbFailure INTEGER,
eqptPowerInVoltage INTEGER,
eqptPowerInCurrent INTEGER,
eqptPowerInConsumedPower INTEGER
}
eqptPowerId OBJECT-TYPE
SYNTAX EqptHolderIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Index in equipment Power Table.
Index gives the shelf identification.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPowerEntry 1 }
eqptPowerAdminMode OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
ac (1),
ac-and-dc-local (2),
dc-network (3),
dc-network-and-dc-local (4),
dc-local (5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The eqptPowerAdminMode shows the configured power mode.
This configured mode will be used to mask any failures detected
for non-supported modes.
Enumeration is as follows:
0 = no powermanagement mode configured
1 = AC -> failures on DC local and DC network suppressed
2 = AC + DC local -> failures on DC network suppressed
3 = DC network -> failures on AC or DC local suppressed
4 = DC network + DC local -> failures on AC suppressed
5 = DC local -> failures on DC network or AC suppressed
Configuration of the eqptPowerAdminMode is not mandatory and will
not impact the behavior of the power module.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 2}
eqptPowerOperMode OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
ac (1),
ac-and-dc-local (2),
dc-network (3),
dc-network-and-dc-local (4),
dc-local (5),
battery-fallback (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The eqptPowerOperMode shows the power mode the NE is using at the
moment of reading.
The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO
(e.g. RANI-B or RPNI-B) will provide valid information for this
object.
Other systems without Power mode support get no-powermgnt (0).
Enumeration is as follows:
0 = system without an active power management
1 = AC
2 = AC + DC local
3 = DC network
4 = DC network + DC local
5 = DC local
6 = Battery fallback, i.e. only battery provides power to the system.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 3}
eqptPowerBatType OBJECT-TYPE
SYNTAX INTEGER
{
not-configured (0),
agm-vrla-PbCa-battery (1),
agm-vrla-Pure-Pb-battery (2),
flooded-battery (3),
gel-battery (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object is used to configure the battery type.
This configuration only possible for planned powermanagement devices,
in this case a planned RANI-B or RPNI-B. Only values for supported
battery types are possible (e.g. in R51 only AGM/VRLA Lead Calcium
BATTERY (1) is supported for the RANI-B/RPNI-B)
The configured value is used to configure the power management driver.
The link between the configurable value and the battery type is:
0 = no battery configured
1 = AGM/VRLA Lead Calcium BATTERY
2 = AGM/VRLA Pure Lead BATTERY
3 = FLOODED BATTERY
4 = GEL BATTERY
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 4}
eqptPowerBatStartCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The capacity (Ah) of the battery at the moment of installation.
The value of the capacity is in 1/100 Ah.
Instatiated when eqptPowerBatType is configured.
The configuration of this object is mandatory together with the
configuration of the eqptPowerBatType
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1000 .. 10000
PERSIST: YES DEFVALUE: 1000 UNITS: 1/10O Ah "
::= { eqptPowerEntry 5}
eqptPowerBatPlannedLifetime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Planned lifetime of the installed battery in 1/10 year.
The planned lifetime, together with the start capacity, is used to
calculate the actual maximal capacity of the battery.
Instatiated when eqptPowerBatType is configured.
The configuration of this object is mandatory together with the
configuration of the eqptPowerBatType
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 150
PERSIST: YES DEFVALUE: 0 UNITS: 1/10 Year "
::= { eqptPowerEntry 6}
eqptPowerBatState OBJECT-TYPE
SYNTAX INTEGER
{
not-configured (0),
no-data (1),
charging (2),
charged (3),
discharging (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The battery state will provide a view on the state of the battery.
Possible states are: charging, charged and discharging.
This operational state has meaning for devices that have a configured
eqptPowerBatType. Other devices get a not-configured (0) value returned.
Enumeration is as follows:
1 = no data available, e.g. battery configured, but not connected
2 = charging
3 = charged
4 = discharging
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 7}
eqptPowerBatFailure OBJECT-TYPE
SYNTAX INTEGER
{
not-applicable (0),
voltage-good (1),
voltage-out-of-range (2),
over-voltage (3),
over-temperature (4),
battery-depleted (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The battery failure state will provide an view on the failure state of
the battery.
This failure state has meaning for devices that have a configured
eqptPowerBatType and eqptPowerBatState different from default or
no-data. Other devices get a not-applicable (0) value returned.
Specific ranges for the failure cases strongly depend on the battery type
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not applicable
1 = voltage good
2 = voltage out of range
3 = over-voltage
4 = over-temperature alarm on local temperature sensor
5 = battery depleted
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 8}
eqptPowerBatTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Measured temperature of the battery in 1/10 Celcius
The value is only readable when the battery type (eqptPowerBatType)
is configured and the battery is installed and reachable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: -1000 .. 1000
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Celcius "
::= { eqptPowerEntry 9}
eqptPowerBatActualCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The capacity (in % of a fully charged battery) of the battery.
The value is only readable when the battery type (eqptPowerBatType)
is configured and the battery is installed and reachable.
Default value of 0% is returned when the battery is not reachable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 - 100
PERSIST: NO DEFVALUE: 0 UNITS: % "
::= { eqptPowerEntry 10}
eqptPowerBatDefenseMode OBJECT-TYPE
SYNTAX INTEGER
{
no-defense (0),
voice-priority (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The battery defense modes offers the operator the possibility to
select the preferred power defense mode in case the system falls
back to the battery mode. The power defense mode is a way to
optimize the power consumption. In R5001 two options are possible.
In later releases additional defense modes will be introduced.
- no battery defense. In this mode the system will run normally,
offering regular service until the battery runs out and the
regular hw defenses are started (Dying Gasp)
- voice priority. In this mode when the system falls back to the
battery the regular service will be maintained until the battery
drains until 90% and will then give priority to the voice LT's by
powering down the DSL LT's. Voice service will be maintained until
the battery runs out and the regular hw defenses are started (Dying
Gasp).
This configuration only possible for planned powermanagement devices,
in this case a planned RANI-B or RPNI-B.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 11}
eqptPowerBatDefenseThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The threshold gives an indication of the remaining capacity of the
battery at the moment the defense defined in eqptPowerBatDefenseMode
should be started. The value is in %. In the default case the configured
defense mode is immediately activated.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-100
PERSIST: YES DEFVALUE: 80 UNITS: % "
::= { eqptPowerEntry 12}
eqptPowerACState OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
active (1),
active-failure (2),
failure (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The AC power state will provide an view on the state of the AC Power
supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and AC input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 13}
eqptPowerACFailure OBJECT-TYPE
SYNTAX INTEGER
{
not-applicable (0),
voltage-good (1),
voltage-out-of-range (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The AC failure state will provide an view on the failure state of
the AC power supply.
This failure state has meaning when eqptPowerACstate different from
default. In other cases not-applicable (0) is returned.
Specific ranges for the failure cases strongly depend on the AC power
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not-applicable
1 = voltage good
2 = voltage out of range
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 14}
eqptPowerNDCaState OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
active (1),
active-failure (2),
failure (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The NDCa (Network DC a) state will provide an view on the state of
the Network DC Power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and NDC a input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 15}
eqptPowerNDCaFailure OBJECT-TYPE
SYNTAX INTEGER
{
not-applicable (0),
voltage-good (1),
low-voltage(2),
under-voltage(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The NDCa failure state will provide an view on the failure state of
the Network DC a power supply.
This failure state has meaning when eqptPowerNDCaState different from
default. In other cases not-applicable (0) is returned.
Specific ranges for the failure cases strongly depend on the DC power
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not-applicable
1 = voltage-good
2 = low-voltage
3 = under-voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 16}
eqptPowerNDCbState OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
active (1),
active-failure (2),
failure (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The NDCb (Network DC a) state will provide an view on the state of
the Network DC b power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and NDC b input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 17}
eqptPowerNDCbFailure OBJECT-TYPE
SYNTAX INTEGER
{
not-applicable (0),
voltage-good (1),
low-voltage(2),
under-voltage(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The NDCb failure state will provide an view on the failure state of
the Network DC b power supply.
This failure state has meaning when eqptPowerNDCbState different from
default. In other cases not-applicable (0) is returned.
Specific ranges for the failure cases strongly depend on the DC power
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not-applicable
1 = voltage-good
2 = low-voltage
3 = under-voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 18}
eqptPowerLDCaState OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
active (1),
active-failure (2),
failure (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The LDCa power state will provide an view on the state of the local
DC a power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and LDC a input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 19}
eqptPowerLDCaFailure OBJECT-TYPE
SYNTAX INTEGER
{
not-applicable (0),
voltage-good (1),
voltage-out-of-range (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The LDCa failure state will provide an view on the failure state of
the local DC a power supply.
This failure state has meaning when eqptPowerLDCaState different from
default. In other cases not-applicable (0) is returned.
Enumeration is as follows:
0 = not-applicable
1 = voltage good
2 = voltage out of range
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 20}
eqptPowerLDCbState OBJECT-TYPE
SYNTAX INTEGER
{
no-powermgnt (0),
active (1),
active-failure (2),
failure (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The LDCb power state will provide an view on the state of the local
DC b power suply.
The value is different from no-powermgnt (0) for devices with power
management functionality and LDC b input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 21}
eqptPowerLDCbFailure OBJECT-TYPE
SYNTAX INTEGER
{
not-applicable (0),
voltage-good (1),
voltage-out-of-range (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The LDCb failure state will provide an view on the failure state of
the local DC b power supply.
This failure state has meaning when eqptPowerLDCbState different from
default. In other cases not-applicable (0) is returned.
Enumeration is as follows:
0 = not-applicable
1 = voltage good
2 = voltage out of range
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: - "
::= { eqptPowerEntry 22}
eqptPowerInVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Measured incoming voltage in 1/10 Volt
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 2650
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Volt "
::= { eqptPowerEntry 23}
eqptPowerInCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Measured incoming current in 1/10 Ampere
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 60
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Ampere "
::= { eqptPowerEntry 24}
eqptPowerInConsumedPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Calculated incoming consumed power in 1/10 Watt
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 6000
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Watt "
::= { eqptPowerEntry 25}
-- ==================================================================
-- | STOP POWER MANAGEMENT OBJECTS |
-- ==================================================================
-- ==================================================================
-- | START POWER SUPPLY MANAGEMENT TABLE |
-- ==================================================================
eqptPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Equipment power table, representing the power suplly management objects
This table contains one row per power supply supported on the system.
In other cases no entry is instantiated.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { asamEquipmentMIB 19 }
eqptPowerSupplyEntry OBJECT-TYPE
SYNTAX EqptPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment power table.
An entry will be instantiated per power supply supported on the system.
ALCATEL NOTE:
SUPPORT: YES "
INDEX { eqptPowerSupplyId }
::= { eqptPowerSupplyTable 1 }
EqptPowerSupplyEntry ::= SEQUENCE {
eqptPowerSupplyId EqptPowerSupplyIndex,
eqptPowerSupplyPartNumber OCTET STRING,
eqptPowerSupplyCleiCode OCTET STRING,
eqptPowerSupplySerNumber OCTET STRING,
eqptPowerSupplyVin INTEGER,
eqptPowerSupplyIin INTEGER,
eqptPowerSupplyVout INTEGER,
eqptPowerSupplyIout INTEGER,
eqptPowerSupplyTemperature INTEGER,
eqptPowerSupplyFaultVin INTEGER,
eqptPowerSupplyFaultVout INTEGER,
eqptPowerSupplyFaultIin INTEGER,
eqptPowerSupplyFaultIout INTEGER,
eqptPowerSupplyFaultTemperature INTEGER,
eqptPowerSupplyFaultCml INTEGER,
eqptPowerSupplyPresent INTEGER,
eqptPowerSupplyFaultDetected INTEGER
}
eqptPowerSupplyId OBJECT-TYPE
SYNTAX EqptPowerSupplyIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Index in equipment Power Supply Table.
This is a number representing the Nth power supply present in the system.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPowerSupplyEntry 1}
eqptPowerSupplyPartNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(13))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the part number of the installed power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 2}
eqptPowerSupplyCleiCode OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(11))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the CLEI code of the installed power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 3}
eqptPowerSupplySerNumber OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(19))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the serial number of the installed power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 4}
eqptPowerSupplyVin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the incoming voltage arriving at the power supply in millivolt
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 5}
eqptPowerSupplyIin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the incoming current arriving at the power supply in milliampere
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 6}
eqptPowerSupplyVout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the output voltage provided by the power supply in millivolt
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 7}
eqptPowerSupplyIout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the output current provided by the power supply in milliampere
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 8}
eqptPowerSupplyTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the temperature of the power supply in millidegree
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 9}
eqptPowerSupplyFaultVin OBJECT-TYPE
SYNTAX INTEGER
{
no-error (0),
input-overvoltage-fault (1),
input-overvoltage-warning (2),
input-undervoltage-warning (3),
input-undervoltage-fault (4),
input-ac-nok-fault (5),
input-ac-nok-warning (6),
unit-off-for-insufficient-input-voltage (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the fault or warning occurring for the input voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 10}
eqptPowerSupplyFaultVout OBJECT-TYPE
SYNTAX INTEGER
{
no-error (0),
output-overvoltage-fault (1),
output-overvoltage-warning (2),
output-undervoltage-warning (3),
output-undervoltage-fault (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the fault or warning occurring for the output voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 11}
eqptPowerSupplyFaultIin OBJECT-TYPE
SYNTAX INTEGER
{
no-error (0),
input-overcurrent-fault (1),
input-overcurrent-warning (2),
input-overpower-warning (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the fault or warning occurring for the input current
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 12}
eqptPowerSupplyFaultIout OBJECT-TYPE
SYNTAX INTEGER
{
no-error (0),
output-overcurrent-fault (1),
output-overcurrent-warning (2),
output-undercurrent-warning (3),
output-undercurrent-fault (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the fault or warning occurring for the output current
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 13}
eqptPowerSupplyFaultTemperature OBJECT-TYPE
SYNTAX INTEGER
{
no-error (0),
overtemperature-fault (1),
overtemperature-warning (2),
undertemperature-warning (3),
undertemperature-fault (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the fault or warning occurring for the tempertaure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 14}
eqptPowerSupplyFaultCml OBJECT-TYPE
SYNTAX INTEGER
{
no-error (0),
invalid-or-unsupported-command-received (1),
invalid-or-unsupported-data-received (2),
packet-error-check-failed (3),
memory-fault-detected (4),
processor-fault-detected (5),
other-communication-fault (6),
other-memory-or-logic-fault (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report the fault or warning occurring for the tempertaure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 15}
eqptPowerSupplyPresent OBJECT-TYPE
SYNTAX INTEGER
{
yes (0),
no (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report if the power supply is present.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 16}
eqptPowerSupplyFaultDetected OBJECT-TYPE
SYNTAX INTEGER
{
no (0),
yes (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Report if a fault has been detected. If yes, then
eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout,
eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut,
eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml
is reporting an error.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerSupplyEntry 17}
-- ==================================================================
-- | STOP POWER SUPPLY MANAGEMENT TABLE |
-- ==================================================================
eqptPowerSupplyRftc OBJECT IDENTIFIER ::= { asamEquipmentMIB 20 }
-- ==================================================================
-- | START POWER SUPPLY RFT-C COMMON TABLE |
-- ==================================================================
eqptPowerRftcTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPowerRftcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Equipment RFT-C power table, representing the RFT-C management objects
This table contains one row per RFT-C module supported on the system.
In other cases no entry is instantiated.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { eqptPowerSupplyRftc 1 }
eqptPowerRftcEntry OBJECT-TYPE
SYNTAX EqptPowerRftcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the equipment RFT-C power table.
ALCATEL NOTE:
SUPPORT: YES "
INDEX { eqptPowerRftcId }
::= { eqptPowerRftcTable 1 }
EqptPowerRftcEntry ::= SEQUENCE {
eqptPowerRftcId EqptHolderIndex,
eqptPowerRftcVCommon INTEGER,
eqptPowerRftcICommon INTEGER,
eqptPowerRftcTHotspot INTEGER,
eqptPowerRftcTAmbient INTEGER,
eqptPowerRftcSWVersion DisplayString,
eqptPowerRftcHWVersion DisplayString,
eqptPowerRftcHWRevision INTEGER,
eqptPowerRftcSerialnumber DisplayString,
eqptPowerRftcManufacturer DisplayString,
eqptPowerRftcLineCount INTEGER
}
eqptPowerRftcId OBJECT-TYPE
SYNTAX EqptHolderIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index in equipment Power RFT-C Table.
This is a number represents the shelf containting the RFT-C module.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPowerRftcEntry 1}
eqptPowerRftcVCommon OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the common voltage arriving at the power supply in millivolt
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: mV "
::= { eqptPowerRftcEntry 2}
eqptPowerRftcICommon OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the common current arriving at the power supply in milliampere
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: mA "
::= { eqptPowerRftcEntry 3}
eqptPowerRftcTHotspot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the temperature of the power supplys hotspot in degrees celcius
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: °C"
::= { eqptPowerRftcEntry 4}
eqptPowerRftcTAmbient OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the ambient temperature of the power supply in degrees celcius
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: °C"
::= { eqptPowerRftcEntry 5}
eqptPowerRftcSWVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the software version of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerRftcEntry 6}
eqptPowerRftcHWVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the hardware version of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerRftcEntry 7}
eqptPowerRftcHWRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report hardware revision of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerRftcEntry 8}
eqptPowerRftcSerialnumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report serial number of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerRftcEntry 9}
eqptPowerRftcManufacturer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the manufacturer code of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerRftcEntry 10}
eqptPowerRftcLineCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"
Report the number of lines used on this RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - "
::= { eqptPowerRftcEntry 11}
-- ==================================================================
-- | STOP POWER SUPPLY RFT-C COMMON TABLE |
-- ==================================================================
-- ==================================================================
-- | START POWER SUPPLY RFT-C LINE TABLE |
-- ==================================================================
eqptPowerRftcLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF EqptPowerRftcLineEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= { eqptPowerSupplyRftc 2 }
eqptPowerRftcLineEntry OBJECT-TYPE
SYNTAX EqptPowerRftcLineEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the eqptPowerRftcLineTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { eqptPowerRftcId, eqptPowerRftcLineId }
::= { eqptPowerRftcLineTable 1 }
EqptPowerRftcLineEntry ::= SEQUENCE {
eqptPowerRftcLineId INTEGER,
eqptPowerRftcLineStatus EqptPowerRftcLineStatus
}
eqptPowerRftcLineId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Report the line number
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPowerRftcLineEntry 1 }
eqptPowerRftcLineStatus OBJECT-TYPE
SYNTAX EqptPowerRftcLineStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Report the line status.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= { eqptPowerRftcLineEntry 2 }
END
Reference in New Issue View Git Blame Copy Permalink