david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/telco-systems/binos/PRVT-RSVP-MIB

1869 lines
68 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-RSVP-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------
PRVT-RSVP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32, IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION, RowStatus, TruthValue
FROM SNMPv2-TC
InterfaceIndexOrZero FROM IF-MIB
InetAddressIPv6 FROM INET-ADDRESS-MIB
mpls FROM PRVT-CR-LDP-MIB;
prvtRsvp MODULE-IDENTITY
LAST-UPDATED "200804140000Z"
ORGANIZATION "BATM Advanced Communication"
CONTACT-INFO
" BATM/Telco Systems Support team
Email:
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"
DESCRIPTION "The MIB module for management of the PRVT-RSVP
product."
-- Revision history.
REVISION "200804140000Z"
DESCRIPTION
"Added range constraints to
prvtRsvpProductLocalRepairDelay, prvtRsvpProductRefreshInterval,
prvtRsvpProductNotifyRRInterval, prvtRsvpProductNotifyRRLimit,
prvtRsvpProductInitPathRRInterval, prvtRsvpProductInitPathRRLimit."
REVISION "200606020000Z"
DESCRIPTION
"Initial version."
::= { mpls 7 }
prvtRsvpObjects OBJECT IDENTIFIER ::= { prvtRsvp 1 } -- tables
-- Textual conventions
PrvtRsvpAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The desired administrative state of an RSVP
entity."
SYNTAX INTEGER {
up(1),
down(2)
}
PrvtRsvpOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The current operational state of an RSVP entity."
SYNTAX INTEGER {
up(1), -- active
down(2), -- inactive
goingUp(3), -- activating
goingDown(4), -- deactivating
actFailed(5) -- activation failed
}
PrvtRsvpIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The index value identifying an RSVP entity."
SYNTAX Unsigned32
PrvtRsvpDiagReqIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The index value identifying an RSVP session that is being
diagnosed."
SYNTAX Unsigned32
PrvtRsvpDiagNodeIndexType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The index value identifying a node within an RSVP session that is
being diagnosed."
SYNTAX Unsigned32
PrvtRsvpDiagNodeTypeVal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The type of a node in a session that is being diagnosed."
SYNTAX INTEGER {
missing(1), -- no information received
ingress(2), -- the ingress node
transit(3), -- an intermediate node
egress(4) -- the egress node
}
-- End of textual conventions
-- RSVP entity table
-- This table is used to create and manage RSVP entities.
prvtRsvpProductTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtRsvpProductEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of RSVP entities."
::= { prvtRsvpObjects 1 }
prvtRsvpProductEntry OBJECT-TYPE
SYNTAX PrvtRsvpProductEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an RSVP entity."
INDEX { prvtRsvpProductIndex }
::= { prvtRsvpProductTable 1 }
PrvtRsvpProductEntry ::= SEQUENCE {
prvtRsvpProductIndex PrvtRsvpIndex,
prvtRsvpProductASNumber Integer32,
prvtRsvpProductSenderTTL Integer32,
prvtRsvpProductMinTimerPeriod Integer32,
prvtRsvpProductAPIIfIndex InterfaceIndexOrZero,
prvtRsvpProductAPIAddress OCTET STRING,
prvtRsvpProductAPIRefreshInterval Integer32,
prvtRsvpProductLocalRepairDelay Integer32,
prvtRsvpProductRefreshInterval Integer32,
prvtRsvpProductRefreshMultiple Integer32,
prvtRsvpProductRfrshSlewDenom Integer32,
prvtRsvpProductRfrshSlewNumerator Integer32,
prvtRsvpProductBlockadeMultiple Integer32,
prvtRsvpProductSocketBufPoolSize Integer32,
prvtRsvpProductSwitchBufPoolSize Integer32,
prvtRsvpProductTeMibBufPoolSize Integer32,
prvtRsvpProductRoutingBufPoolSize Integer32,
prvtRsvpProductLSPSetupPriority Integer32,
prvtRsvpProductLSPHoldingPriority Integer32,
prvtRsvpProductAdminStatus PrvtRsvpAdminStatus,
prvtRsvpProductOperStatus PrvtRsvpOperStatus,
prvtRsvpProductRowStatus RowStatus,
prvtRsvpProductLsrIndex Unsigned32,
prvtRsvpProductTeMibIndex Unsigned32,
prvtRsvpProductMultiStackSupport Integer32,
prvtRsvpProductUseHopByHop TruthValue,
prvtRsvpProductUseNotify TruthValue,
prvtRsvpProductNotifyRRDecay Integer32,
prvtRsvpProductNotifyRRInterval Integer32,
prvtRsvpProductNotifyRRLimit Integer32,
prvtRsvpProductAllowIPEncap TruthValue,
prvtRsvpProductProtocolExtensions BITS,
prvtRsvpProductPSRFlags BITS,
prvtRsvpProductInitPathRRDecay Integer32,
prvtRsvpProductInitPathRRInterval Integer32,
prvtRsvpProductInitPathRRLimit Integer32,
prvtRsvpProductEnableUni TruthValue,
prvtRsvpProductRestartCapable TruthValue,
prvtRsvpProductRestartTime Unsigned32,
prvtRsvpProductRecoveryTime Unsigned32,
prvtRsvpProductMinPeerRestart Integer32,
prvtRsvpProductGracefulDelTimeout Integer32,
prvtRsvpProductEgressDelBehavior INTEGER,
prvtRsvpProductEnabUniConnSplicing TruthValue,
prvtRsvpProductFastRerouteCaps BITS,
prvtRsvpProductFastRroutBkpRtryInt Integer32,
prvtRsvpProductErrorActionFlags BITS,
prvtRsvpProductEnableNni INTEGER,
prvtRsvpProductBehaviorFlags BITS,
prvtRsvpProductLabelSetStyle INTEGER,
prvtRsvpProductLabelSetOperStatus INTEGER,
prvtRsvpProductLabelSetTrapEnable TruthValue,
prvtRsvpProductLabelSetChngAct Integer32,
prvtRsvpProductExtPrtAdminStatus PrvtRsvpAdminStatus,
prvtRsvpProductUniIncSonetProfile Unsigned32,
prvtRsvpProductFrrFacAdminStatus PrvtRsvpAdminStatus,
prvtRsvpProductFrrFacOperStatus PrvtRsvpOperStatus,
prvtRsvpProductIpv6AdminStatus PrvtRsvpAdminStatus,
prvtRsvpProductIpv6OperStatus PrvtRsvpOperStatus,
prvtRsvpProductAPIIpv6Address InetAddressIPv6
}
prvtRsvpProductIndex OBJECT-TYPE
SYNTAX PrvtRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this prvtRsvpProductEntry. This is the
HAF entity index passed on the entity create parameters."
::= { prvtRsvpProductEntry 1 }
prvtRsvpProductASNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number identifying the autonomous system (AS) to which
this node belongs."
DEFVAL { 1 }
::= { prvtRsvpProductEntry 2 }
prvtRsvpProductSenderTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TTL set on messages originating at this node. A value
of 0 indicates this number is determined by other means."
DEFVAL { 0 }
::= { prvtRsvpProductEntry 3 }
prvtRsvpProductMinTimerPeriod OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum granularity to allow an internal timer to be
set in the PRVT-RSVP product code."
DEFVAL { 200 }
::= { prvtRsvpProductEntry 4 }
prvtRsvpProductAPIIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management assigned interface identifier for the (internal) LRAPI
interface between RSVP and TE-MIB components. This must be unique in
the interface index namespace of the node - it MUST not match any real
interface index.
It is recommended that this is set to zero or 0x7FFFFFFF."
DEFVAL { 2147483647 }
::= { prvtRsvpProductEntry 5 }
prvtRsvpProductAPIAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management assigned IP address used to identify the (internal) LRAPI
interface between RSVP and TE-MIB components.
The configured API address MUST not be a real address in the network.
It is recommended that this is set to a non-zero reserved address
value, such as 224.0.0.0.
If multi-stack support is set to PHOP, this address must be unique for
each RSVP stack in the node.
The same address(es) can be used on all nodes in the network."
DEFVAL { 'E0000000'H } -- 224.0.0.0
::= { prvtRsvpProductEntry 6 }
prvtRsvpProductAPIRefreshInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is now deprecated."
DEFVAL { 30000 }
::= { prvtRsvpProductEntry 7 }
prvtRsvpProductLocalRepairDelay OBJECT-TYPE
SYNTAX Integer32 (-1 | 1000..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set the delay between detection of a
path error and instigation of local repair procedures. This
allows local routing updates to converge.
A value of -1 indicates that local
repair procedures should not take place, but that the error
should be propagated upstream.
Where FRR capabilities are supported at this node
local_repair_delay must be set to -1."
DEFVAL { 1000 }
::= { prvtRsvpProductEntry 8 }
prvtRsvpProductRefreshInterval OBJECT-TYPE
SYNTAX Integer32 (1000..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RSVP value, R, which is used to set the average
interval between refresh path and resv messages.
Note : If values for the if_refresh_interval and if_refresh_multiple
are configured such that the following inequality is not obeyed :
6 * refresh_interval * (refresh_multiple + 0.5) < 0x7FFFFFFF.
Then the time-to-die for the path value will be set to its maximum
value and it is probable that the lsp will time out before a refresh
arrives."
DEFVAL { 30000 }
::= { prvtRsvpProductEntry 9 }
prvtRsvpProductRefreshMultiple OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RSVP value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by
the refresh interval before the state is deemed to have
timed out.
Note : See note in prvtRsvpProductRefreshInterval above."
DEFVAL { 3 }
::= { prvtRsvpProductEntry 10 }
prvtRsvpProductRfrshSlewDenom OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fraction until it reaches the new desired value."
DEFVAL { 10 }
::= { prvtRsvpProductEntry 11 }
prvtRsvpProductRfrshSlewNumerator OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
fraction until it reaches the new desired value."
DEFVAL { 3 }
::= { prvtRsvpProductEntry 12 }
prvtRsvpProductBlockadeMultiple OBJECT-TYPE
SYNTAX Integer32 (1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RSVP value, Kb, which is the number of refresh timeout
periods after which blockade state is deleted."
DEFVAL { 2 }
::= { prvtRsvpProductEntry 13 }
prvtRsvpProductSocketBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for sending
sockets data. This is used to pace the sockets data flows."
DEFVAL { 8 }
::= { prvtRsvpProductEntry 14 }
prvtRsvpProductSwitchBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for programming
the switch. This is used to ensure programming operations do
not fail in buffer shortage conditions."
DEFVAL { 8 }
::= { prvtRsvpProductEntry 15 }
prvtRsvpProductTeMibBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for signalling
TE-MIB. This is used to ensure signals are not lost in buffer
shortage conditions."
DEFVAL { 8 }
::= { prvtRsvpProductEntry 16 }
prvtRsvpProductRoutingBufPoolSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of pre-reserved buffers available for route
queries. This is used to ensure re-routing of many LSPs does
not fail in buffer shortage conditions."
DEFVAL { 8 }
::= { prvtRsvpProductEntry 17 }
prvtRsvpProductLSPSetupPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically more or equal (so lower or equal priority)
than the value of the holding priority object."
DEFVAL { 4 }
::= { prvtRsvpProductEntry 18 }
prvtRsvpProductLSPHoldingPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically less or equal (so higher or equal priority)
than the value of the holding priority object."
DEFVAL { 3 }
::= { prvtRsvpProductEntry 19 }
prvtRsvpProductAdminStatus OBJECT-TYPE
SYNTAX PrvtRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state of the RSVP entity."
DEFVAL { up }
::= { prvtRsvpProductEntry 20 }
prvtRsvpProductOperStatus OBJECT-TYPE
SYNTAX PrvtRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this instance of PRVT-RSVP."
::= { prvtRsvpProductEntry 21 }
prvtRsvpProductRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create and delete a PRVT-RSVP Product Table entry.
When this object is set to 'active', only the
prvtRsvpProductAdminStatus object in the row may be modified."
DEFVAL { active }
::= { prvtRsvpProductEntry 22 }
prvtRsvpProductLsrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the PRVT-LMGR product instance which this
PRVT-RSVP is to join to as its LDB interface provider. If
this value is not specified, or the value of this object
is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
Lsr index when joining on the LDB interface."
DEFVAL { 0 }
::= { prvtRsvpProductEntry 23 }
prvtRsvpProductTeMibIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the TE-MIB product instance which this
PRVT-RSVP is to join to as its LRA interface provider. If
this value is not specified, or the value of this object
is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
TeMib Index when joining on the LRA interface."
DEFVAL { 0 }
::= { prvtRsvpProductEntry 24 }
prvtRsvpProductMultiStackSupport OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate if multiple RSVP stacks are present
in the same system as the current one and, if so, how
they are supported. If set to PHOP, Path messages are
forwarded to PRVT-RSVP with the Previous Hop value set as
the hop prior to the incoming interface, not as the next
hop interface as normal. If set to LIH, the hardware
location of the current RSVP stack is used as the LIH in
the HOP object."
DEFVAL { 1 }
::= { prvtRsvpProductEntry 25 }
prvtRsvpProductUseHopByHop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate that PRVT-RSVP should use the hop by hop
addressing scheme for PATH and PATH-TEAR messages it
sends. If set then the IP addresses used in the IP header
of PATH messages forwarded by PRVT-RSVP set source as the
local outgoing interface IP address, and destination as
the next hop router IP address."
DEFVAL { false }
::= { prvtRsvpProductEntry 26 }
prvtRsvpProductUseNotify OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate that PRVT-RSVP should attempt to insert
a Notify Request object in all Path requests that is sends
as ingress and all Resv requests that it sends as egress.
The precise behavior is modified by a user exit called by
the RSVP code.
This field is not used unless the mplsTunnelUpNotRecip or
mplsTunnelDownNotRecip fields in TE-MIB are set to 0.0.0.0."
DEFVAL { false }
::= { prvtRsvpProductEntry 27 }
prvtRsvpProductNotifyRRDecay OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage increase in the rapid retransmission
interval for each consecutive unacknowledged RSVP Notify
message. A value of 0 indicates a constant retransmission
rate."
DEFVAL { 100 }
::= { prvtRsvpProductEntry 28 }
prvtRsvpProductNotifyRRInterval OBJECT-TYPE
SYNTAX Integer32 (1000..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in milliseconds before a Notify message is
first resent if no acknowledgement is received."
DEFVAL { 2000 }
::= { prvtRsvpProductEntry 29 }
prvtRsvpProductNotifyRRLimit OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of times a Notify message is resent if
no acknowledgement is received."
DEFVAL { 2 }
::= { prvtRsvpProductEntry 30 }
prvtRsvpProductAllowIPEncap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate that PRVT-RSVP should support the use of
IP encapsulation of RSVP packets, which are required for
out-of-band signaling. If set, then PRVT-RSVP will accept
incoming RSVP packets that are IP encapsulated, and will
IP encapsulate outgoing packets whenever the IP routing
stub indicates that it is required for a particular route."
DEFVAL { false }
::= { prvtRsvpProductEntry 31 }
prvtRsvpProductProtocolExtensions OBJECT-TYPE
SYNTAX BITS { bypassFastReroute(0),
detourFastReroute(1),
noResAffOnInIf(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies which extensions to the standard RSVP-TE protocol
are enabled. For fully standards-compliant behavior, set
this parameter to zero (no bits set). To enable specific
non-standard protocol extensions, set this parameter to the
bitwise OR of whichever of the following behaviors you wish
to enable.
- bypassFastReroute: Enable support for facility fast reroute
protection of LSPs (bypass LSP protection). This flag is
deprecated in favour of the
prvtRsvpProductFrrFacAdminStatus field which can be
modified while RSVP is admin up, however either field can be
used. When this flag is set RSVP automatically sets the
prvtRsvpProductFrrFacAdminStatus.
- detourFastReroute: Enable support for one-to-one fast
reroute protection of LSPs (detour LSP protection).
- noResAffOnInIf: Disable resource affinity checking on
incoming interfaces for LSPs. If this flag is set, RSVP
will accept Path messages which use invalid resource
affinities for the incoming interface used by the LSP."
DEFVAL { { } }
::= { prvtRsvpProductEntry 32 }
prvtRsvpProductPSRFlags OBJECT-TYPE
SYNTAX BITS { pathErrPSRSet(0),
pathErrPSRNotSet(1),
ldbCommonRcvd(2),
ldbPreempted(3),
routingError(4),
invalidPathMsg(5),
sessionExpired(6),
unableToRepairRoute(7),
unableToRepairIf(8),
reachedRetryLimit(9),
unableToRefresh(10),
resvErrTurnaround(11),
incomingIfDown(12),
outgoingIfDown(13)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used by PRVT-RSVP to determine whether it
should set the Path State Removed flag on a PathErr (and
therefore remove corresponding state and generate a
PathTear). Each bit of this flags field corresponds to a
situation where PRVT-RSVP may generate a PathErr. Setting a
particular bit will result in PRVT-RSVP removing state,
setting the Path State Removed flag and generating a
PathTear in that corresponding situation. The possible
bit values are
- pathErrPSRSet: PRVT-RSVP has received a PathErr message
with the Path State Removed flag set.
- pathErrPSRNotSet: PRVT-RSVP has received a PathErr message
with the Path State Removed flag unset.
- ldbCommonRcvd: PRVT-RSVP has received a negative response
to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC
message.
- ldbPreempted: PRVT-RSVP has received a Preemption message
from Label Manager.
- routingError: PRVT-RSVP has received a Negative response
to an ATG_IPR_QUERY_ROUTE message.
- invalidPathMsg: PRVT-RSVP has received an invalid Path
message.
- sessionExpired: A session in PRVT-RSVP has expired.
- unableToRepairRoute: A route has been removed and
PRVT-RSVP is unable to start local repair.
- unableToRepairIf: An interface has been removed and
PRVT-RSVP is unable start local repair.
- reachedRetryLimit: An initial Path Message has reached
its retry limit.
- unableToRefresh: PRVT-RSVP has been unable to refresh an
LSP.
- resvErrTurnaround: PRVT-RSVP has received a ResvErr at the
Egress node containing a REROUTING object and this is to
be turned round into a PathErr.
- incomingIfDown: The incoming MPLS data interface for
an LSP has been deactivated.
- outgoingIfDown: The outgoing MPLS data interface for
an LSP has been deactivated."
DEFVAL { {} }
::= { prvtRsvpProductEntry 33 }
prvtRsvpProductInitPathRRDecay OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage increase in the rapid
retransmission interval for each consecutive
unacknowledged RSVP Initial Path message. A value of 0
indicates a constant retransmission rate.
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing."
DEFVAL { 100 }
::= { prvtRsvpProductEntry 34 }
prvtRsvpProductInitPathRRInterval OBJECT-TYPE
SYNTAX Integer32 (1000..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rapid retransmission interval in milliseconds before
an Initial Path message is first resent if no
acknowledgement is received.
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing."
DEFVAL { 2000 }
::= { prvtRsvpProductEntry 35 }
prvtRsvpProductInitPathRRLimit OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of times an Initial Path message is
resent if no acknowledgement is received.
A Path message is treated as an initial Path if it is the
Path message which creates the LSP or a Path refresh
message which requires re-routing."
DEFVAL { 2 }
::= { prvtRsvpProductEntry 36 }
prvtRsvpProductEnableUni OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether the local node supports UNI
signaling messages."
DEFVAL { false }
::= { prvtRsvpProductEntry 37 }
prvtRsvpProductRestartCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether the local node should advertise
itself as restart capable. This should be set to true
if fault-tolerance is enabled in PRVT-MPLS or if the node
supports recovery procedures."
DEFVAL { false }
::= { prvtRsvpProductEntry 38 }
prvtRsvpProductRestartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP communication. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
The value chosen should be large enough for RSVP to be
terminated and restarted. If fault-tolerance is enabled
in PRVT-MPLS, then sufficient time should be allowed for
RSVP to fail over, which should include the time taken for
the audit phase to complete.
A value of 0xFFFFFFFF may be configured to imply an infinite
restart time.
Only used if prvtRsvpProductRestartCapable is set to true.
Note that the maximum real time value that can be set is
0x7FFFFFFF. If a value is requested greater than
0x7FFFFFFF and less than 0xFFFFFFFF the request will be
rejected."
DEFVAL { 10000 }
::= { prvtRsvpProductEntry 39 }
prvtRsvpProductRecoveryTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP and
MPLS forwarding information after the re-establishment of
Hello connectivity. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
A value of zero indicates that the node does not support
resynchronization following failure of the local node.
A value of 0xFFFFFFFF indicates an infinite recovery time.
Note that if fault-tolerance is not enabled in PRVT-MPLS and
the node is acting as an ingress for tunnels, then any
ingress tunnels that need to be recovered should be
configured during this recovery period. These tunnels
should be configured in TE-MIB with the admin_status set
to UP, otherwise they will be lost from the switch
controller.
Only used if prvtRsvpProductRestartCapable is set to true.
Note that the maximum real time value that can be set is
0x7FFFFFFF. If a value is requested greater than
0x7FFFFFFF and less than 0xFFFFFFFF the request will be
rejected."
DEFVAL { 10000 }
::= { prvtRsvpProductEntry 40 }
prvtRsvpProductMinPeerRestart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mininum period of time in milliseconds that RSVP
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication loss.
RSVP will wait for the maximum of this time and the
restart_time advertised in the RESTART_CAP object in Hello
messages from the neighbor."
DEFVAL { 0 }
::= { prvtRsvpProductEntry 41 }
prvtRsvpProductGracefulDelTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time in milliseconds that PRVT-MPLS will wait for
graceful deletion to complete before the forced deletion
procedure is used instead."
DEFVAL { 30000 }
::= { prvtRsvpProductEntry 42 }
prvtRsvpProductEgressDelBehavior OBJECT-TYPE
SYNTAX INTEGER { delWithPathErr(1),
delWithResvD(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the action that an egress node should take in
the graceful deletion procedure on receipt of a Path
message containing an Admin Status object with the D
and R bits set. The possible values are:-
- delWithPathErr: Send a PathErr message with the
Path_State_removed flag set.
- delWithResvD: Send a Resv message containing an Admin
Status object with the D bit set."
DEFVAL { delWithPathErr }
::= { prvtRsvpProductEntry 43 }
prvtRsvpProductEnabUniConnSplicing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether UNI-N nodes should allow the
splicing of UNI connections with proprietary ON
connections."
DEFVAL { false }
::= { prvtRsvpProductEntry 44 }
prvtRsvpProductFastRerouteCaps OBJECT-TYPE
SYNTAX BITS { fastReroutePLR(0),
fastRerouteMP(1),
fastRerouteDetourRestart(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what fast reroute capabilities are enabled
on this node. This field is only valid if the fast
reroute extension is enabled in the
prvtRsvpProductProtocolExtensions field above.
- PLR: Node provides fast reroute point of local repair
capability.
- MP: Node provides fast reroute merge point capability.
- DetourRestart: Node implements some protocol extensions
to recover detour fast reroute LSPs after a node restart
or an adjacent node restart. This flag is only valid if
detourFastReroute flag is set in the
prvtRsvpProductProtocolExtensions field above.
Note that a node can still perform some FRR processing
even if the PLR and MP flags are clear (at a detour transit
for instance)."
DEFVAL { { } }
::= { prvtRsvpProductEntry 45 }
prvtRsvpProductFastRroutBkpRtryInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this node is a PLR, this field specifies the period
that the node should wait before retrying the setup of a
backup LSP which failed last time because no route was
available. In the case that a backup LSP is set up but an
error is received from upstream, setup will be attempted
again immediately.
This field is only valid if this node is defined as PLR
capable in the _prvtRsvpProductFastRerouteCapabilities_
field above."
DEFVAL { 30000 }
::= { prvtRsvpProductEntry 46 }
prvtRsvpProductErrorActionFlags OBJECT-TYPE
SYNTAX BITS { eafTearStateOnLSIErr(0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used by PRVT-RSVP to determine whether it
should take any special action following certain types of
local errors. Each bit of this flags field corresponds to
an error and a corresponding action.
When one of these errors occurs, the relevant bit flag is
checked - if set, the specified action is taken; if not
set, the normal action is taken according the RSVP
protocol. The possible bit values are the following.
- eafTearStateOnLSIErr: When PRVT-RSVP receives a negative
response to an ATG_LDB_CONNECT_LSP_XC message on a UNI
node, the Path state is torn down."
DEFVAL { {} }
::= { prvtRsvpProductEntry 47 }
prvtRsvpProductEnableNni OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2),
disabling(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A flag to indicate whether the local node supports NNI
signaling messages."
DEFVAL { disabled }
::= { prvtRsvpProductEntry 48 }
prvtRsvpProductBehaviorFlags OBJECT-TYPE
SYNTAX BITS { enableTTLMatch(0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies some detailed aspects of the behavior of
PRVT-RSVP. This field may be changed while _admin_status_
is up.
- enableTTLMatch: Whether to discard received RSVP
packets sent with the Router Alert option if the IP and
RSVP TTL values do not match. In certain circumstances
TTL comparison can identify RSVP service breaks, and allow
the discarding of packets that would otherwise disrupt
installed LSPs.
This option has no effect for Out Of Band operation.
This option should be left disabled for LSP hierarchy
operation (LSPs set up over existing LSPs) and for
Facility Fast Reroute (which sets up backup LSPs over
existing bypass LSPs)."
DEFVAL { {} }
::= { prvtRsvpProductEntry 49 }
prvtRsvpProductLabelSetStyle OBJECT-TYPE
SYNTAX INTEGER {
excludeLabelHeader(1),
includeLabelHeader(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the style of LABEL_SET object that should be
used. RFCs 3741 and 3743 are unclear whether the
LABEL_SET object should include LABEL headers. The
correct interpretation is that the header should not be
present, but there are implementations that include the
LABEL header, so this option is included for compatibility
with these implementations.
- excludeLabelHeader: The LABEL_SET object contains
concatenated LABEL values without the object headers.
- includeLabelHeader: The LABEL_SET object contains
concatenated LABEL objects with the object headers."
DEFVAL { excludeLabelHeader }
::= { prvtRsvpProductEntry 50 }
prvtRsvpProductLabelSetOperStatus OBJECT-TYPE
SYNTAX INTEGER {
excludeLabelHeader(1),
includeLabelHeader(2),
goingToExclude(3),
goingToInclude(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of Label Set style.
- excludeLabelHeader: The LABEL_SET object contains
concatenated LABEL values without the object headers.
- includeLabelHeader: The LABEL_SET object contains
concatenated LABEL objects with the object headers.
- goingToExclude: The Label Set Style is being changed
from includeLabelHeader to excludeLabelHeader.
- goingToInclude: The Label Set Style is being changed
from excludeLabelHeader to includeLabelHeader."
::= { prvtRsvpProductEntry 51 }
prvtRsvpProductLabelSetTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable traps for the Label
Set style oper_status object."
DEFVAL { false }
::= { prvtRsvpProductEntry 52 }
prvtRsvpProductLabelSetChngAct OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the action to take when the value of
prvtRsvpProductLabelSetStyle is changed.
- leaveLSPs: All nodes should suppress refreshes and
switch to the new format while refreshes are suppressed.
- tearLSPs: Any LSPs using label sets will be deleted
before switching all nodes to the new format, and any new
LSPs using label sets will be dropped/rejected until the
switch is complete."
DEFVAL { 1 }
::= { prvtRsvpProductEntry 53 }
prvtRsvpProductExtPrtAdminStatus OBJECT-TYPE
SYNTAX PrvtRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired operational state of support for the extended
PROTECTION object defined in
draft-lang-ccamp-gmpls-recovery-e2e-signaling."
DEFVAL { down }
::= { prvtRsvpProductEntry 54 }
prvtRsvpProductUniIncSonetProfile OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether Sonet Profile is included on messages
to or from a UNI-C node."
DEFVAL { 0 }
::= { prvtRsvpProductEntry 55 }
prvtRsvpProductFrrFacAdminStatus OBJECT-TYPE
SYNTAX PrvtRsvpAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether backup LSPs can be put in place for LSPs
requesting FRR using the facility method.
Setting this to UP means that LSPs that request FRR using
the facility method can have protection at this node.
Existing LSPs that request FRR facility protection will have
protection put in place when the next Path refresh is
received.
Setting this to DOWN means that LSPs that request FRR using
the facility method will not be protected at this node.
Existing LSPs that have FRR facility protection will lose
that protection, and if the LSP had been rerouted to use the
backup LSP then the protected LSP will be lost.
This field replaces the bypassFastReroute flag on the protocol
extensions field in this MIB (although the bypassFastReroute flag
is still supported for backwards compatibility). It can be
modified while RSVP is oper_status UP or DOWN. When this field
is changed the bypassFastReroute flag is automatically modified
to mirror the change."
DEFVAL { down }
::= { prvtRsvpProductEntry 56 }
prvtRsvpProductFrrFacOperStatus OBJECT-TYPE
SYNTAX PrvtRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status for FRR Facility support.
When this is UP backup LSPs will be put in place, when this
is down backup LSPs will not be put in place and there will
be no LSPs that have backup LSPs."
::= { prvtRsvpProductEntry 57 }
prvtRsvpProductIpv6AdminStatus OBJECT-TYPE
SYNTAX PrvtRsvpAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the local node supports IPv6 LSPs.
Setting this to UP means that this node supports IPv6 LSPs
being set up to, from and through this node.
Setting this to DOWN means that IPv6 LSPs are NOT supported by
this node. Existing IPv6 LSPs for which this node is the
ingress, egress or transit are torn down.
This field can be modified while RSVP is oper_status UP or
DOWN.
The value of this field MUST match the value of the
dcMplsTeMibRsvpIpv6AdminStatus field in the
prvtMplsTeMibEntityTable."
DEFVAL { down }
::= { prvtRsvpProductEntry 58 }
prvtRsvpProductIpv6OperStatus OBJECT-TYPE
SYNTAX PrvtRsvpOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status for IPv6 support. When
this is UP IPv6 LSPs can be set up to from or through this
node. When this is down there will be no active IPv6 LSPs."
::= { prvtRsvpProductEntry 59 }
prvtRsvpProductAPIIpv6Address OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Management assigned IPv6 address used to identify the
(internal) LRAPI interface between RSVP and TE-MIB
components.
The configured API IPv6 address MUST not be a real address
in the network. It is recommended that this is set to a
non-zero reserved address value. This MUST be an address
with global scope.
If multi-stack support is set to PHOP, this address must
be unique for each RSVP stack in the node.
The same address(es) can be used on all nodes in the
network."
::= { prvtRsvpProductEntry 60 }
-- Diagnostics table
-- This table is used to control diagnostic requests and responses.
prvtRsvpDiagnosticTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtRsvpDiagnosticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of sessions that are being diagnosed."
::= { prvtRsvpObjects 2 }
prvtRsvpDiagnosticEntry OBJECT-TYPE
SYNTAX PrvtRsvpDiagnosticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a session that is being diagnosed."
INDEX { prvtRsvpDiagProductIndex,
prvtRsvpDiagRequestIndex }
::= { prvtRsvpDiagnosticTable 1 }
PrvtRsvpDiagnosticEntry ::= SEQUENCE {
prvtRsvpDiagProductIndex PrvtRsvpIndex,
prvtRsvpDiagRequestIndex PrvtRsvpDiagReqIndex,
prvtRsvpDiagReqsInProgress Unsigned32,
prvtRsvpDiagSessionEndPoint IpAddress,
prvtRsvpDiagSessionTunnelId Unsigned32,
prvtRsvpDiagSessionExtTunnelId Unsigned32,
prvtRsvpDiagLastHop IpAddress,
prvtRsvpDiagSender IpAddress,
prvtRsvpDiagMaxHops Integer32,
prvtRsvpDiagHopByHopReply TruthValue
-- prvtRsvpDiagRowStatus RowStatus
}
prvtRsvpDiagProductIndex OBJECT-TYPE
SYNTAX PrvtRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the PRVT-RSVP product that is handling this query."
::= { prvtRsvpDiagnosticEntry 1 }
prvtRsvpDiagRequestIndex OBJECT-TYPE
SYNTAX PrvtRsvpDiagReqIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this prvtRsvpDiagnosticEntry. This corresponds to a
particular session being diagnosed and is an arbitrary value,
defined on row creation."
::= { prvtRsvpDiagnosticEntry 2 }
prvtRsvpDiagReqsInProgress OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outstanding diagnostic requests relating to this
session."
::= { prvtRsvpDiagnosticEntry 3 }
prvtRsvpDiagSessionEndPoint OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
session object."
::= { prvtRsvpDiagnosticEntry 4 }
prvtRsvpDiagSessionTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel ID, from the LSP_TUNNEL_IPv4 session object."
::= { prvtRsvpDiagnosticEntry 5 }
prvtRsvpDiagSessionExtTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object."
::= { prvtRsvpDiagnosticEntry 6 }
prvtRsvpDiagLastHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last hop to be queried. This is the address
to which the DREQ message is first sent."
::= { prvtRsvpDiagnosticEntry 7 }
prvtRsvpDiagSender OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the sender for the specified session."
::= { prvtRsvpDiagnosticEntry 8 }
prvtRsvpDiagMaxHops OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of hops to diagnose."
::= { prvtRsvpDiagnosticEntry 9 }
prvtRsvpDiagHopByHopReply OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to indicate that DREPs should be returned hop-by-
hop using the reverse of the path taken by the DREQ."
::= { prvtRsvpDiagnosticEntry 10 }
-- prvtRsvpDiagRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Used to create or delete a PRVT-RSVP Diagnostic Table entry."
-- ::= { prvtRsvpDiagnosticEntry 11 }
-- Diagnostic node table
-- This table is used to present diagnostic information about nodes in a session.
prvtRsvpDiagNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtRsvpDiagNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of nodes within a session that is being diagnosed.
External management can extract information
from this table, but cannot modify information in it."
::= { prvtRsvpObjects 3 }
prvtRsvpDiagNodeEntry OBJECT-TYPE
SYNTAX PrvtRsvpDiagNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a node within a session that is being diagnosed."
INDEX { prvtRsvpDiagNodeProductIndex,
prvtRsvpDiagNodeRequestIndex,
prvtRsvpDiagNodeIndex }
::= { prvtRsvpDiagNodeTable 1 }
PrvtRsvpDiagNodeEntry ::= SEQUENCE {
prvtRsvpDiagNodeProductIndex PrvtRsvpIndex,
prvtRsvpDiagNodeRequestIndex PrvtRsvpDiagReqIndex,
prvtRsvpDiagNodeIndex PrvtRsvpDiagNodeIndexType,
prvtRsvpDiagNodeType PrvtRsvpDiagNodeTypeVal,
-- Below is the information that is returned in a DIAG_RESPONSE
prvtRsvpDiagNodeDreqArrivalTime Unsigned32,
prvtRsvpDiagNodeIncomingIfAddr IpAddress,
prvtRsvpDiagNodeOutgoingIfAddr IpAddress,
prvtRsvpDiagNodePrevHopAddr IpAddress,
prvtRsvpDiagNodeDTTL Integer32,
prvtRsvpDiagNodeMFlag TruthValue,
prvtRsvpDiagNodeRErr Integer32,
prvtRsvpDiagNodeKValue Integer32,
prvtRsvpDiagNodeTimerValue Integer32,
-- Below are the objects that can be appended to a DIAG_RESPONSE
prvtRsvpDiagRsvpHopAddr IpAddress,
prvtRsvpDiagRsvpHopLIH Unsigned32,
prvtRsvpDiagSenderTpltAddress IpAddress,
prvtRsvpDiagSenderTpltLSPId Integer32,
-- Info from SENDER_TSPEC and ADSPEC is covered by FLOWSPEC
prvtRsvpDiagFlowSpecCLBktRate Unsigned32,
prvtRsvpDiagFlowSpecCLBktDep Unsigned32,
prvtRsvpDiagFlowSpecCLPkDataRate Unsigned32,
prvtRsvpDiagFlowSpecCLMinPolUnit Unsigned32,
prvtRsvpDiagFlowSpecCLMaxPktSize Unsigned32,
prvtRsvpDiagFlowSpecGQBktRate Unsigned32,
prvtRsvpDiagFlowSpecGQBktDep Unsigned32,
prvtRsvpDiagFlowSpecGQPkDataRate Unsigned32,
prvtRsvpDiagFlowSpecGQMinPolUnit Unsigned32,
prvtRsvpDiagFlowSpecGQMaxPktSize Unsigned32,
prvtRsvpDiagFlowSpecGQRate Unsigned32,
prvtRsvpDiagFlowSpecGQSlack Unsigned32,
prvtRsvpDiagFlowSpecCoSCoS Integer32,
prvtRsvpDiagFlowSpecCoSMTU Integer32,
prvtRsvpDiagFilterSpecAddress IpAddress,
prvtRsvpDiagFilterSpecLSPId Integer32,
prvtRsvpDiagConfirmRcvAddr IpAddress,
prvtRsvpDiagStyle Unsigned32
-- The SCOPE object is omitted
}
prvtRsvpDiagNodeProductIndex OBJECT-TYPE
SYNTAX PrvtRsvpIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the PRVT-RSVP product that is handling this query."
::= { prvtRsvpDiagNodeEntry 1 }
prvtRsvpDiagNodeRequestIndex OBJECT-TYPE
SYNTAX PrvtRsvpDiagReqIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the corresponding request in prvtRsvpDiagnosticTable."
::= { prvtRsvpDiagNodeEntry 2 }
prvtRsvpDiagNodeIndex OBJECT-TYPE
SYNTAX PrvtRsvpDiagNodeIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this prvtRsvpDiagNodeEntry. This is equivalent to the
hop number, with 1 being the ingress."
::= { prvtRsvpDiagNodeEntry 3 }
prvtRsvpDiagNodeType OBJECT-TYPE
SYNTAX PrvtRsvpDiagNodeTypeVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the node: ingress, transit, egress or missing. Missing
indicates that no diagnostic response has been received for this
node, and this entry may in fact represent more than one node."
::= { prvtRsvpDiagNodeEntry 4 }
prvtRsvpDiagNodeDreqArrivalTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The arrival time of the DREQ at the node, specified as a 32-bit
NTP timestamp."
::= { prvtRsvpDiagNodeEntry 5 }
prvtRsvpDiagNodeIncomingIfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface on which message from the sender
are expected to arrive at this node, or 0 if unknown."
::= { prvtRsvpDiagNodeEntry 6 }
prvtRsvpDiagNodeOutgoingIfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface through which the DREQ arrived
and to which messages flow from the given sender for the
specified session address, or 0 if unknown."
::= { prvtRsvpDiagNodeEntry 7 }
prvtRsvpDiagNodePrevHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address from which this node receives RSVP PATH messages
for this source, or 0 if unknown. This is also the address to
which the DREQ was forwarded."
::= { prvtRsvpDiagNodeEntry 8 }
prvtRsvpDiagNodeDTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP hops traversed by the DREQ between the downstream
RSVP node and this node."
::= { prvtRsvpDiagNodeEntry 9 }
prvtRsvpDiagNodeMFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag that indicates whether the reservation described by the
response objects is merged with reservations from other downstream
interfaces before being forwarded upstream."
::= { prvtRsvpDiagNodeEntry 10 }
prvtRsvpDiagNodeRErr OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error conditions at this node.
Bit 3 indicates ROUTE object too big;
Bit 2 indicates packet too big;
Bit 1 indicates no PATH state.
Bit 1 is the least significant bit."
::= { prvtRsvpDiagNodeEntry 11 }
prvtRsvpDiagNodeKValue OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The refresh timer multiple."
::= { prvtRsvpDiagNodeEntry 12 }
prvtRsvpDiagNodeTimerValue OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local refresh timer value in seconds."
::= { prvtRsvpDiagNodeEntry 13 }
prvtRsvpDiagRsvpHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hop address from the session's RSVP_HOP object."
::= { prvtRsvpDiagNodeEntry 14 }
prvtRsvpDiagRsvpHopLIH OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LIH from the session's RSVP_HOP object."
::= { prvtRsvpDiagNodeEntry 15 }
prvtRsvpDiagSenderTpltAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from the session's SENDER_TEMPLATE object."
::= { prvtRsvpDiagNodeEntry 16 }
prvtRsvpDiagSenderTpltLSPId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSP ID from the session's SENDER_TEMPLATE object."
::= { prvtRsvpDiagNodeEntry 17 }
prvtRsvpDiagFlowSpecCLBktRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load token bucket rate in bytes per second,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 18 }
prvtRsvpDiagFlowSpecCLBktDep OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load token bucket depth in bytes,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 19 }
prvtRsvpDiagFlowSpecCLPkDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load peak data rate in bytes per second,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 20 }
prvtRsvpDiagFlowSpecCLMinPolUnit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load minimum policed unit
from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 21 }
prvtRsvpDiagFlowSpecCLMaxPktSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv controlled load maximum packet size
from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 22 }
prvtRsvpDiagFlowSpecGQBktRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS token bucket rate in bytes per second,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 23 }
prvtRsvpDiagFlowSpecGQBktDep OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS token bucket depth in bytes,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 24 }
prvtRsvpDiagFlowSpecGQPkDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS peak data rate in bytes per second,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 25 }
prvtRsvpDiagFlowSpecGQMinPolUnit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS minimum policed unit
from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 26 }
prvtRsvpDiagFlowSpecGQMaxPktSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS maximum packet size
from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 27 }
prvtRsvpDiagFlowSpecGQRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS rate in bytes per second,
from the session's FLOWSPEC object.
This value is rounded to the nearest integer."
::= { prvtRsvpDiagNodeEntry 28 }
prvtRsvpDiagFlowSpecGQSlack OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Int-serv guaranteed QoS slack in microseconds,
from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 29 }
prvtRsvpDiagFlowSpecCoSCoS OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoS class of service from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 30 }
prvtRsvpDiagFlowSpecCoSMTU OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoS maximum packet size from the session's FLOWSPEC object."
::= { prvtRsvpDiagNodeEntry 31 }
prvtRsvpDiagFilterSpecAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from the session's FILTER_SPEC object."
::= { prvtRsvpDiagNodeEntry 32 }
prvtRsvpDiagFilterSpecLSPId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSP ID from the session's FILTER_SPEC object."
::= { prvtRsvpDiagNodeEntry 33 }
prvtRsvpDiagConfirmRcvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address from the session's CONFIRM object."
::= { prvtRsvpDiagNodeEntry 34 }
prvtRsvpDiagStyle OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The style word from the session's STYLE object."
::= { prvtRsvpDiagNodeEntry 35 }
-- Module compliance.
-- conformance
prvtRsvpConformance OBJECT IDENTIFIER ::= {prvtRsvp 2 }
prvtRsvpCompliances OBJECT IDENTIFIER ::= { prvtRsvpConformance 1 }
prvtRsvpGroups OBJECT IDENTIFIER ::= { prvtRsvpConformance 2 }
prvtRsvpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the PRVT-RSVP product MIB."
MODULE
GROUP prvtRsvpProductGroup
DESCRIPTION
"Product Table Objects."
GROUP prvtRsvpDiagGroup
DESCRIPTION
"Diagnostic Table Objects."
GROUP prvtRsvpDiagNodeGroup
DESCRIPTION
"Diag Node Table Objects."
::= { prvtRsvpCompliances 1 }
prvtRsvpProductGroup OBJECT-GROUP
OBJECTS {
prvtRsvpProductASNumber,
prvtRsvpProductSenderTTL,
prvtRsvpProductMinTimerPeriod,
prvtRsvpProductAPIIfIndex,
prvtRsvpProductAPIAddress,
prvtRsvpProductAPIRefreshInterval,
prvtRsvpProductLocalRepairDelay,
prvtRsvpProductRefreshInterval,
prvtRsvpProductRefreshMultiple,
prvtRsvpProductRfrshSlewDenom,
prvtRsvpProductRfrshSlewNumerator,
prvtRsvpProductBlockadeMultiple,
prvtRsvpProductSocketBufPoolSize,
prvtRsvpProductSwitchBufPoolSize,
prvtRsvpProductTeMibBufPoolSize,
prvtRsvpProductRoutingBufPoolSize,
prvtRsvpProductLSPSetupPriority,
prvtRsvpProductLSPHoldingPriority,
prvtRsvpProductAdminStatus,
prvtRsvpProductOperStatus,
prvtRsvpProductRowStatus,
prvtRsvpProductLsrIndex,
prvtRsvpProductTeMibIndex,
prvtRsvpProductMultiStackSupport,
prvtRsvpProductUseHopByHop,
prvtRsvpProductUseNotify,
prvtRsvpProductNotifyRRDecay,
prvtRsvpProductNotifyRRInterval,
prvtRsvpProductNotifyRRLimit,
prvtRsvpProductAllowIPEncap,
prvtRsvpProductProtocolExtensions,
prvtRsvpProductPSRFlags,
prvtRsvpProductInitPathRRDecay,
prvtRsvpProductInitPathRRInterval,
prvtRsvpProductInitPathRRLimit,
prvtRsvpProductEnableUni,
prvtRsvpProductRestartCapable,
prvtRsvpProductRestartTime,
prvtRsvpProductRecoveryTime,
prvtRsvpProductMinPeerRestart,
prvtRsvpProductGracefulDelTimeout,
prvtRsvpProductEgressDelBehavior,
prvtRsvpProductEnabUniConnSplicing,
prvtRsvpProductFastRerouteCaps,
prvtRsvpProductFastRroutBkpRtryInt,
prvtRsvpProductErrorActionFlags,
prvtRsvpProductEnableNni,
prvtRsvpProductBehaviorFlags,
prvtRsvpProductLabelSetStyle,
prvtRsvpProductLabelSetOperStatus,
prvtRsvpProductLabelSetTrapEnable,
prvtRsvpProductLabelSetChngAct,
prvtRsvpProductExtPrtAdminStatus,
prvtRsvpProductUniIncSonetProfile,
prvtRsvpProductFrrFacAdminStatus,
prvtRsvpProductFrrFacOperStatus,
prvtRsvpProductIpv6AdminStatus,
prvtRsvpProductIpv6OperStatus,
prvtRsvpProductAPIIpv6Address
}
STATUS current
DESCRIPTION
"Product Table Objects."
::= { prvtRsvpGroups 2 }
prvtRsvpDiagGroup OBJECT-GROUP
OBJECTS {
prvtRsvpDiagReqsInProgress,
prvtRsvpDiagSessionEndPoint,
prvtRsvpDiagSessionTunnelId,
prvtRsvpDiagSessionExtTunnelId,
prvtRsvpDiagLastHop,
prvtRsvpDiagSender,
prvtRsvpDiagMaxHops,
prvtRsvpDiagHopByHopReply
-- prvtRsvpDiagRowStatus
}
STATUS current
DESCRIPTION
"Diagnostic Table Objects."
::= { prvtRsvpGroups 3 }
prvtRsvpDiagNodeGroup OBJECT-GROUP
OBJECTS {
prvtRsvpDiagNodeType,
prvtRsvpDiagNodeDreqArrivalTime,
prvtRsvpDiagNodeIncomingIfAddr,
prvtRsvpDiagNodeOutgoingIfAddr,
prvtRsvpDiagNodePrevHopAddr,
prvtRsvpDiagNodeDTTL,
prvtRsvpDiagNodeMFlag,
prvtRsvpDiagNodeRErr,
prvtRsvpDiagNodeKValue,
prvtRsvpDiagNodeTimerValue,
prvtRsvpDiagRsvpHopAddr,
prvtRsvpDiagRsvpHopLIH,
prvtRsvpDiagSenderTpltLSPId,
prvtRsvpDiagSenderTpltAddress,
prvtRsvpDiagFlowSpecCLBktRate,
prvtRsvpDiagFlowSpecCLBktDep,
prvtRsvpDiagFlowSpecCLPkDataRate,
prvtRsvpDiagFlowSpecCLMinPolUnit,
prvtRsvpDiagFlowSpecCLMaxPktSize,
prvtRsvpDiagFlowSpecGQBktRate,
prvtRsvpDiagFlowSpecGQBktDep,
prvtRsvpDiagFlowSpecGQPkDataRate,
prvtRsvpDiagFlowSpecGQMinPolUnit,
prvtRsvpDiagFlowSpecGQMaxPktSize,
prvtRsvpDiagFlowSpecGQRate,
prvtRsvpDiagFlowSpecGQSlack,
prvtRsvpDiagFlowSpecCoSCoS,
prvtRsvpDiagFlowSpecCoSMTU,
prvtRsvpDiagFilterSpecAddress,
prvtRsvpDiagFilterSpecLSPId,
prvtRsvpDiagConfirmRcvAddr,
prvtRsvpDiagStyle
}
STATUS current
DESCRIPTION
"Diag Node Table Objects."
::= { prvtRsvpGroups 4 }
END
Reference in New Issue Copy Permalink