1907 lines
51 KiB
Plaintext
1907 lines
51 KiB
Plaintext
|
-- *********************************************************************
|
||
|
|
-- **
|
||
|
|
-- ** BATM Advanced Communications.
|
||
|
|
-- **
|
||
|
|
-- *********************************************************************
|
||
|
|
-- ** Filename: PRVT-SWITCH-MIB.mib
|
||
|
|
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
|
||
|
|
-- ** Purpose: Private MIB
|
||
|
|
-- *********************************************************************
|
||
|
|
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
|
||
|
|
-- WARNING:
|
||
|
|
--
|
||
|
|
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
|
||
|
|
--
|
||
|
|
-- This file is the property of BATM Advanced Communications and contains
|
||
|
|
-- proprietary and confidential information. This file is made
|
||
|
|
-- available to authorized BATM customers on the express
|
||
|
|
-- condition that neither it, nor any of the information contained
|
||
|
|
-- therein, shall be disclosed to third parties or be used for any
|
||
|
|
-- purpose other than to replace, modify or upgrade firmware and/or
|
||
|
|
-- software components of BATM manufactured equipment within the
|
||
|
|
-- authorized customer's network, and that such transfer be
|
||
|
|
-- completed in accordance with the instructions provided by
|
||
|
|
-- BATM. Any other use is strictly prohibited.
|
||
|
|
--
|
||
|
|
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
|
||
|
|
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
|
||
|
|
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||
|
|
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
|
||
|
|
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
||
|
|
--
|
||
|
|
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
|
||
|
|
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
|
||
|
|
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
|
||
|
|
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
|
||
|
|
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
|
||
|
|
--
|
||
|
|
--
|
||
|
|
--
|
||
|
|
PRVT-SWITCH-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE,
|
||
|
|
Counter32,
|
||
|
|
Integer32,
|
||
|
|
NOTIFICATION-TYPE
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
|
||
|
|
TEXTUAL-CONVENTION,
|
||
|
|
DisplayString,
|
||
|
|
TruthValue
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
|
||
|
|
NOTIFICATION-GROUP
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
|
||
|
|
privateVendorOID
|
||
|
|
FROM PRIV-VENDORDEF-MIB
|
||
|
|
|
||
|
|
ifIndex,
|
||
|
|
ifAdminStatus,
|
||
|
|
ifOperStatus
|
||
|
|
FROM IF-MIB;
|
||
|
|
|
||
|
|
prvtSwitchMib MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200906220000Z"
|
||
|
|
ORGANIZATION "BATM Advanced Communication"
|
||
|
|
CONTACT-INFO
|
||
|
|
" BATM/Telco Systems Support team
|
||
|
|
Email:
|
||
|
|
For North America: techsupport@telco.com
|
||
|
|
For North Europe: support@batm.de, info@batm.de
|
||
|
|
For the rest of the world: techsupport@telco.com"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"The switch MIB module for managing switch
|
||
|
|
parameters"
|
||
|
|
|
||
|
|
-- revision history
|
||
|
|
REVISION "200906220000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Add value unsupported(255) for object configL2IfaceAdminCrossOver."
|
||
|
|
REVISION "200904140000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Add description for reportsHardwareFanStatus 0."
|
||
|
|
REVISION "200903080000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Updated devices system OIDs."
|
||
|
|
REVISION "200902200000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Add support for temperature high limit (reportsHardwareTemperatureScale,reportsHardwareTemperatureHighLimit)."
|
||
|
|
REVISION "200901120000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Mark configL2IfaceDuplexSpeedSet. Add additional 10G value for
|
||
|
|
configL2IfaceDuplexSpeedSet and reportsL2IfaceDuplexSpeedGet"
|
||
|
|
REVISION "200809250000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Add support for crossover and remote-fault-detect."
|
||
|
|
REVISION "200803280000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Updated devices system OIDs."
|
||
|
|
REVISION "200802280000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added OIDs of various devices."
|
||
|
|
REVISION "200712280000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added sysAssemblyNumber, sysPartNumber, sysCLEI, sysHwRevision, sysManufacturingDate objects"
|
||
|
|
REVISION "200712120000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added configL2IfaceMtu."
|
||
|
|
REVISION "200709260000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new objects in configL2IfaceTable"
|
||
|
|
REVISION "200704240000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Updated OID definitions"
|
||
|
|
REVISION "200702060000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Updated description of reportsHardwarePSStatus object"
|
||
|
|
REVISION "200610250000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"New OID group added"
|
||
|
|
REVISION "200607020000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added T-Metro-ES and Alcatel system OID."
|
||
|
|
REVISION "200606140000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Changed mMiRIC-E1(89) to mMiRIC-E3(89)"
|
||
|
|
REVISION "200604200000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new duplex and speed values"
|
||
|
|
REVISION "200602100000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added all missing port/module types"
|
||
|
|
REVISION "200602020000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Defined the DUAL SFP module type"
|
||
|
|
REVISION "200512220000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new object identifier for devices.
|
||
|
|
Added new notification sysIntfModuleChange.
|
||
|
|
Changed ModuleHwType modules that had '_' in them, should be with '-' instaead
|
||
|
|
m100BaseGBIC_not_installed to m100BaseGBIC-not-installed.
|
||
|
|
mCES_4TDM to mCES-4TDM,
|
||
|
|
m1250BaseSingleFiber_SFP to m1250BaseSingleFiber-SFP."
|
||
|
|
REVISION "200512080000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added the new sysIntfModuleChange notification for T-Metro devices."
|
||
|
|
REVISION "200510030000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Returned the old duplex-speed mixed object for backward compatability"
|
||
|
|
REVISION "200509260000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Separated the duplex mode and speed setting in the configL2Table"
|
||
|
|
|
||
|
|
REVISION "200509070000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added the m1250BaseSingleFiber_SFP(87) port type"
|
||
|
|
|
||
|
|
REVISION "200507200000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added the mCES_4TDM(86) port type"
|
||
|
|
REVISION "200507080000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Removed the range values for reportsL2IfaceUnit, reportsL2IfaceSlot and
|
||
|
|
reportsL2IfacePort."
|
||
|
|
|
||
|
|
REVISION "200503070000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added the mCES and 31000BaseX-SFP module types for T-Metro devices."
|
||
|
|
|
||
|
|
REVISION "200502160000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Fixed spelling errors and changed the contact info."
|
||
|
|
|
||
|
|
REVISION "200502010000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added TMetro to sysProductsOids, added new module types: tMetroCES,
|
||
|
|
tMetro2XSFPuplink, tMetro2F, tMetro1G"
|
||
|
|
|
||
|
|
REVISION "200406290000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added T6Pro to sysProductsOids, added a new module type CPM"
|
||
|
|
|
||
|
|
REVISION "200405030000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added support for exposing the switch series"
|
||
|
|
|
||
|
|
REVISION "200403030000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"L2 Interface name (configL2IfaceName) max size changed from 16 to 256."
|
||
|
|
|
||
|
|
REVISION "200402030000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Addded m100BaseGBIC_not_installed to ModuleHwType."
|
||
|
|
|
||
|
|
REVISION "200311180000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added sysManufacturing group,sysSerialNumber."
|
||
|
|
|
||
|
|
REVISION "200310160000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"1. Added portRedundantLinkChange notification.
|
||
|
|
2. Added reportsIfJack. This table enables support of interfaces attached to
|
||
|
|
more then one physical interface.
|
||
|
|
3. Added reportsL2IfaceActiveJackIndex."
|
||
|
|
|
||
|
|
REVISION "200309090000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added SFP port types."
|
||
|
|
|
||
|
|
REVISION "200307020000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added support for reporting hardware port type"
|
||
|
|
|
||
|
|
REVISION "200305060000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Move to SMI-V2."
|
||
|
|
|
||
|
|
REVISION "200212120000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added support for controlling STP topology change detection"
|
||
|
|
|
||
|
|
REVISION "200212010000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added support for Sniffer"
|
||
|
|
|
||
|
|
REVISION "200211210000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added support for RSTP"
|
||
|
|
|
||
|
|
REVISION "200211170000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added support for POS interface speed 155 & 622 M."
|
||
|
|
|
||
|
|
REVISION "200209090000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new module for T5Pro including ATM/MLP and 5 ports SM/MM."
|
||
|
|
|
||
|
|
REVISION "200204100000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Add traps."
|
||
|
|
REVISION "200108140000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Distinction between set & get flow type to support flow auto-negotiation."
|
||
|
|
REVISION "200107220000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added Default VLAN to configL2IfaceTable"
|
||
|
|
REVISION "200107150000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new sysIntfModule types m1000BaseGBIC_installed/not_installed"
|
||
|
|
REVISION "200105170000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added t5ProRouter."
|
||
|
|
REVISION "200105150000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added reportsHardware group."
|
||
|
|
REVISION "200104190000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added config & reports group."
|
||
|
|
REVISION "200104150000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new modules to sysIntfModule."
|
||
|
|
REVISION "200006280000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version."
|
||
|
|
|
||
|
|
::= { switch 100 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- PRIVATE BRANCH PRODUCTS
|
||
|
|
--
|
||
|
|
prvt-products OBJECT IDENTIFIER ::= { privateVendorOID 1 }
|
||
|
|
prvt-mgmt OBJECT IDENTIFIER ::= { privateVendorOID 2 }
|
||
|
|
|
||
|
|
rptr OBJECT IDENTIFIER ::= { prvt-products 1 }
|
||
|
|
bridge OBJECT IDENTIFIER ::= { prvt-products 2 }
|
||
|
|
trclam OBJECT IDENTIFIER ::= { prvt-products 3 }
|
||
|
|
router OBJECT IDENTIFIER ::= { prvt-products 4 }
|
||
|
|
switch OBJECT IDENTIFIER ::= { prvt-products 5 }
|
||
|
|
ipSwitch OBJECT IDENTIFIER ::= { prvt-products 6 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- L2 SWITCHES
|
||
|
|
--
|
||
|
|
|
||
|
|
bsw OBJECT IDENTIFIER ::= { switch 1 }
|
||
|
|
tps OBJECT IDENTIFIER ::= { switch 2 }
|
||
|
|
tpf OBJECT IDENTIFIER ::= { switch 3 }
|
||
|
|
titan OBJECT IDENTIFIER ::= { switch 5 }
|
||
|
|
titant5 OBJECT IDENTIFIER ::= { switch 7 }
|
||
|
|
edgeLinkT4 OBJECT IDENTIFIER ::= { switch 15 }
|
||
|
|
edgeLinkT5 OBJECT IDENTIFIER ::= { switch 17 }
|
||
|
|
titanPro OBJECT IDENTIFIER ::= { switch 20}
|
||
|
|
acs25L4282 OBJECT IDENTIFIER ::= { switch 500 }
|
||
|
|
acs25L4282t5 OBJECT IDENTIFIER ::= { switch 502 }
|
||
|
|
vol0215 OBJECT IDENTIFIER ::= { switch 999 }
|
||
|
|
vol4000 OBJECT IDENTIFIER ::= { switch 998 }
|
||
|
|
vol5000 OBJECT IDENTIFIER ::= { switch 996 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Variable Type definitions
|
||
|
|
--
|
||
|
|
|
||
|
|
UnitIndex ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value represents the physical position of the unit inside the
|
||
|
|
stack."
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
master(1),
|
||
|
|
slave1(2),
|
||
|
|
slave2(3),
|
||
|
|
slave3(4),
|
||
|
|
slave4(5)
|
||
|
|
}
|
||
|
|
|
||
|
|
ModuleHwType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value represents the physical type of the port or module."
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
uninstalled(1),
|
||
|
|
stacking(2),
|
||
|
|
m100BaseTx(3),
|
||
|
|
m100BaseFxVF45(4),
|
||
|
|
|
||
|
|
m1000BaseSxSCMM850(6),
|
||
|
|
m1000BaseLxSC1300(7), --Multi/Single Mode
|
||
|
|
m1000BaseSCSMLDA(8),
|
||
|
|
m1000BaseSCSMLDB(9),
|
||
|
|
|
||
|
|
m1000BaseSxVF45MM850(10),
|
||
|
|
m1000BaseLxVF451300(11), --Multi/Single Mode
|
||
|
|
|
||
|
|
m1000BaseSxMTRJMM(12),
|
||
|
|
m1000BaseLxMTRJ1300(13), --Multi/Single Mode
|
||
|
|
|
||
|
|
m10BaseFlVF45(14),
|
||
|
|
m10BaseFlVF45X4Ports(15),
|
||
|
|
|
||
|
|
m100BaseFxSCMM(16),
|
||
|
|
m100BaseFxSCSM(17),
|
||
|
|
m100BaseFxSCSM2Port(18),
|
||
|
|
m100BaseFxSCSMLD(19),
|
||
|
|
m100BaseFxSCSMLD2Port(20),
|
||
|
|
|
||
|
|
m100BaseFxMTRJMM(21),
|
||
|
|
m100BaseFxMTRJSM(22),
|
||
|
|
mDUAL-SFP(23),
|
||
|
|
mDUAL-SFP-installed(24),
|
||
|
|
|
||
|
|
m1000BaseTx(25),
|
||
|
|
m1000BaseCx(26),
|
||
|
|
|
||
|
|
mVDSLNT(30),
|
||
|
|
mVDSLLT(31),
|
||
|
|
|
||
|
|
mVDSLNTand100BaseTX(32),
|
||
|
|
mVDSLLTand100BaseTX(33),
|
||
|
|
|
||
|
|
mVDSLLT24Port(34),
|
||
|
|
|
||
|
|
mLayer31000BaseSXSCMM(35),
|
||
|
|
mLayer31000BaseLXSCSM(36),
|
||
|
|
mLayer31000BaseSXSFFMM(37),
|
||
|
|
mLayer31000BaseLXSFFSM(38),
|
||
|
|
|
||
|
|
mLayer3100BaseFXSCMM2Port(39),
|
||
|
|
mLayer3100BaseFXSCSM2Port(40),
|
||
|
|
mLayer3100BaseFXSCMM4Port(41),
|
||
|
|
mLayer3100BaseFXSCSM4Port(42),
|
||
|
|
|
||
|
|
mLayer3100BaseFXSFFMM(43),
|
||
|
|
mLayer3100BaseFXSFFSM(44),
|
||
|
|
mLayer3100BaseTX(45),
|
||
|
|
m1000BaseGBIC-installed(46),
|
||
|
|
m1000BaseGBIC-not-installed(47),
|
||
|
|
|
||
|
|
mLayer31000BaseSX-GIBIC(48),
|
||
|
|
mLayer31000BaseLX-GIBIC(49),
|
||
|
|
mLayer31000BaseCX-GIBIC(50),
|
||
|
|
mLayer31000BaseT-GIBIC(51),
|
||
|
|
mLayer3100BaseSMLCL-GIBIC(52),
|
||
|
|
mLayer3100BaseM5o6SNI-GIBIC(53),
|
||
|
|
mLayer31000BasePOSMM(54),
|
||
|
|
mLayer31000BasePOSSM(55),
|
||
|
|
mLayer3100BaseFXSFFMM20Port(56),
|
||
|
|
mLayer3100BaseFXSFFSM20Port(57),
|
||
|
|
mLayer3100BaseFXSFFMM5Port(58),
|
||
|
|
mLayer3100BaseFXSFFSM5Port(59),
|
||
|
|
mDS3ATM(60),
|
||
|
|
mDS1MLP(61),
|
||
|
|
mMLPmother(62),
|
||
|
|
|
||
|
|
m1000BaseSFP-installed(63),
|
||
|
|
mLayer31000BaseSX-SFP(65),
|
||
|
|
mLayer31000BaseLX-SFP(66),
|
||
|
|
mLayer31000BaseCX-SFP(67),
|
||
|
|
mLayer31000BaseT-SFP(68),
|
||
|
|
mLayer3100BaseSMLCL-SFP(69),
|
||
|
|
mLayer3100BaseM5o6SNI-SFP(70),
|
||
|
|
m100BaseGBIC-not-installed(71),
|
||
|
|
mLayer310GBaseSR-XFP(72),
|
||
|
|
mLayer310GBaseLR-XFP(73),
|
||
|
|
mLayer310GBaseER-XFP(74),
|
||
|
|
mLayer310GBaseSW-XFP(75),
|
||
|
|
mLayer310GBaseLW-XFP(76),
|
||
|
|
mLayer310GBaseEW-XFP(77),
|
||
|
|
mLayer310GBase-XFP(78),
|
||
|
|
m10000BaseMEDIA-not-installed(79),
|
||
|
|
mCpmCard(80),
|
||
|
|
mLayer310GBaseLRW-XFP(81),
|
||
|
|
mLayer310GBaseERW-XFP(82),
|
||
|
|
mLayer31000BaseX-SFP(83),
|
||
|
|
mCES (84),
|
||
|
|
mLayer3100BaseFX-SFP(85),
|
||
|
|
mCES-4TDM(86),
|
||
|
|
mLayer31000BaseLX-BD-SFP(87),
|
||
|
|
mMiRIC-E1(88),
|
||
|
|
mMiRIC-E3(89),
|
||
|
|
mMiRIC-T1(90),
|
||
|
|
mMiRIC-T3(91),
|
||
|
|
|
||
|
|
mLayer31000BaseSFP-Unknown (92),
|
||
|
|
m10000BaseXFP-Unknown (93),
|
||
|
|
xAUI-1G-10G (94),
|
||
|
|
mLayer3-10-1000BaseT (95),
|
||
|
|
mLayer310GBaseSMSR-XFP (96),
|
||
|
|
mLayer310GBaseSMLR-XFP (97),
|
||
|
|
mLayer310GBaseSMER-XFP (98),
|
||
|
|
mLayer310GBaseSMSW-XFP (99),
|
||
|
|
mLayer310GBaseSMLW-XFP (101),
|
||
|
|
mLayer310GBaseSMEW-XFP (102),
|
||
|
|
mLayer310GBaseSMSRW-XFP (103),
|
||
|
|
mLayer310GBaseSMLRW-XFP (104),
|
||
|
|
mLayer310GBaseSMERW-XFP (105),
|
||
|
|
mLayer310GBaseCpPgt-XFP (106),
|
||
|
|
mLayer310GBaseSMZR-XFP (107),
|
||
|
|
mLayer31000BaseZX-SFP (108),
|
||
|
|
mLayer310GBaseSMZX-XFP (109),
|
||
|
|
mLayer310GBaseSMEX-XFP (110),
|
||
|
|
mLayer31000BaseT-WithoutAN-SFP(111),
|
||
|
|
mLayer3100BaseLX-BD-SFP(112)
|
||
|
|
}
|
||
|
|
|
||
|
|
Series ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value represents the series of the switch."
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
notExist(1),
|
||
|
|
e-series(2),
|
||
|
|
g-series(3),
|
||
|
|
t-series(4)
|
||
|
|
}
|
||
|
|
--
|
||
|
|
-- Groups
|
||
|
|
--
|
||
|
|
|
||
|
|
prvtSwitchNotifications OBJECT IDENTIFIER ::= { prvtSwitchMib 0 }
|
||
|
|
sys OBJECT IDENTIFIER ::= { prvtSwitchMib 1 }
|
||
|
|
config OBJECT IDENTIFIER ::= { prvtSwitchMib 2 }
|
||
|
|
reports OBJECT IDENTIFIER ::= { prvtSwitchMib 3 }
|
||
|
|
test OBJECT IDENTIFIER ::= { prvtSwitchMib 4 }
|
||
|
|
commands OBJECT IDENTIFIER ::= { prvtSwitchMib 5 }
|
||
|
|
prvtSwitchConformance OBJECT IDENTIFIER ::= { prvtSwitchMib 6 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- sys group
|
||
|
|
--
|
||
|
|
sysProductsOids OBJECT IDENTIFIER ::= { sys 1 }
|
||
|
|
sysIntf OBJECT IDENTIFIER ::= { sys 2 }
|
||
|
|
sysManufacturing OBJECT IDENTIFIER ::= { sys 3 }
|
||
|
|
sysSwitchingHW OBJECT IDENTIFIER ::= { sys 4 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- sysOids Parameters
|
||
|
|
--
|
||
|
|
t4Router OBJECT IDENTIFIER ::= { sysProductsOids 1 }
|
||
|
|
t5Router OBJECT IDENTIFIER ::= { sysProductsOids 2 }
|
||
|
|
t5ProRouter OBJECT IDENTIFIER ::= { sysProductsOids 3 }
|
||
|
|
t6Router OBJECT IDENTIFIER ::= { sysProductsOids 4 }
|
||
|
|
t5c-48TRouter OBJECT IDENTIFIER ::= { sysProductsOids 5 }
|
||
|
|
t5RNRouter OBJECT IDENTIFIER ::= { sysProductsOids 6 }
|
||
|
|
t5c-24TRouter OBJECT IDENTIFIER ::= { sysProductsOids 7 }
|
||
|
|
t5c-24MRouter OBJECT IDENTIFIER ::= { sysProductsOids 8 }
|
||
|
|
t5c-24FRouter OBJECT IDENTIFIER ::= { sysProductsOids 9 }
|
||
|
|
t5c-24GRouter OBJECT IDENTIFIER ::= { sysProductsOids 10 }
|
||
|
|
t5c-24GTRouter OBJECT IDENTIFIER ::= { sysProductsOids 11 }
|
||
|
|
t6pro-lc-20G OBJECT IDENTIFIER ::= { sysProductsOids 13 }
|
||
|
|
t6pro-cpm OBJECT IDENTIFIER ::= { sysProductsOids 14 }
|
||
|
|
tMetro OBJECT IDENTIFIER ::= { sysProductsOids 16 }
|
||
|
|
tMarc OBJECT IDENTIFIER ::= { sysProductsOids 17 }
|
||
|
|
aHUB1-A OBJECT IDENTIFIER ::= { sysProductsOids 18 }
|
||
|
|
tMetro-ES OBJECT IDENTIFIER ::= { sysProductsOids 19 }
|
||
|
|
|
||
|
|
tMarc-E OBJECT IDENTIFIER ::= { sysProductsOids 20 }
|
||
|
|
tMarc-EW OBJECT IDENTIFIER ::= { sysProductsOids 21 }
|
||
|
|
|
||
|
|
tMarc-WDB OBJECT IDENTIFIER ::= { sysProductsOids 22 }
|
||
|
|
tMarc-WD OBJECT IDENTIFIER ::= { sysProductsOids 23 }
|
||
|
|
tMarc-F OBJECT IDENTIFIER ::= { sysProductsOids 24 }
|
||
|
|
|
||
|
|
t5c-XG OBJECT IDENTIFIER ::= { sysProductsOids 27 }
|
||
|
|
|
||
|
|
compact OBJECT IDENTIFIER ::= { t6pro-cpm 1 }
|
||
|
|
classic OBJECT IDENTIFIER ::= { t6pro-cpm 2 }
|
||
|
|
|
||
|
|
as9205 OBJECT IDENTIFIER ::= { t5c-24TRouter 1 }
|
||
|
|
as9205-F OBJECT IDENTIFIER ::= { t5c-24FRouter 1 }
|
||
|
|
|
||
|
|
tMarc-250 OBJECT IDENTIFIER ::= { tMarc 1 }
|
||
|
|
tMarc-254 OBJECT IDENTIFIER ::= { tMarc 2 }
|
||
|
|
tMarc-254h OBJECT IDENTIFIER ::= { tMarc 3 }
|
||
|
|
|
||
|
|
tMarc-340 OBJECT IDENTIFIER ::= { tMarc 10 }
|
||
|
|
tMarc-380 OBJECT IDENTIFIER ::= { tMarc 11 }
|
||
|
|
|
||
|
|
tMarc-340-E OBJECT IDENTIFIER ::= { tMarc-E 1 }
|
||
|
|
tMarc-380-E OBJECT IDENTIFIER ::= { tMarc-E 2 }
|
||
|
|
tMarc-340-EW OBJECT IDENTIFIER ::= { tMarc-EW 1 }
|
||
|
|
tMarc-380-EW OBJECT IDENTIFIER ::= { tMarc-EW 2 }
|
||
|
|
|
||
|
|
tMarc-340WD-B OBJECT IDENTIFIER ::= { tMarc-WDB 1 }
|
||
|
|
|
||
|
|
tMarc-340WD OBJECT IDENTIFIER ::= { tMarc-WD 1 }
|
||
|
|
|
||
|
|
tMarc-340-F OBJECT IDENTIFIER ::= { tMarc-F 1 }
|
||
|
|
|
||
|
|
tMarc-280 OBJECT IDENTIFIER ::= { tMarc 20 }
|
||
|
|
|
||
|
|
dm9225 OBJECT IDENTIFIER ::= { tMarc-250 1 }
|
||
|
|
dm9225-E OBJECT IDENTIFIER ::= { tMarc-254 1 }
|
||
|
|
dm9234 OBJECT IDENTIFIER ::= { tMarc-340 1 }
|
||
|
|
|
||
|
|
alcatel-7250 OBJECT IDENTIFIER ::= { tMetro 1 }
|
||
|
|
alcatel-7250-ES OBJECT IDENTIFIER ::= { tMetro-ES 1 }
|
||
|
|
alcatel-7250-ESA OBJECT IDENTIFIER ::= { tMetro-ES 2 }
|
||
|
|
|
||
|
|
tMetro-ESA OBJECT IDENTIFIER ::= { tMetro-ES 3 }
|
||
|
|
|
||
|
|
as9220 OBJECT IDENTIFIER ::= { tMetro-ES 10 }
|
||
|
|
tMetro-200S OBJECT IDENTIFIER ::= { tMetro-ES 11 }
|
||
|
|
|
||
|
|
as9215 OBJECT IDENTIFIER ::= { t5c-XG 1 }
|
||
|
|
|
||
|
|
bI-Ethernet OBJECT IDENTIFIER ::= { aHUB1-A 1 }
|
||
|
|
fI-Ethernet OBJECT IDENTIFIER ::= { aHUB1-A 2 }
|
||
|
|
|
||
|
|
-- Start L2 products
|
||
|
|
t5c OBJECT IDENTIFIER ::= { sysProductsOids 100 }
|
||
|
|
t5cgt OBJECT IDENTIFIER ::= { sysProductsOids 222 }
|
||
|
|
t5g OBJECT IDENTIFIER ::= { sysProductsOids 333 }
|
||
|
|
v24s OBJECT IDENTIFIER ::= { sysProductsOids 444 }
|
||
|
|
|
||
|
|
-- Start VoIP products
|
||
|
|
edgeGate281 OBJECT IDENTIFIER ::= { sysProductsOids 1000 }
|
||
|
|
edgeGate281SYS OBJECT IDENTIFIER ::= { sysProductsOids 1001 }
|
||
|
|
edgeGate231 OBJECT IDENTIFIER ::= { sysProductsOids 1010 }
|
||
|
|
edgeGate282 OBJECT IDENTIFIER ::= { sysProductsOids 1020 }
|
||
|
|
edgeGate282S OBJECT IDENTIFIER ::= { sysProductsOids 1021 }
|
||
|
|
edgeGate482S OBJECT IDENTIFIER ::= { sysProductsOids 1022 }
|
||
|
|
edgeGate483S OBJECT IDENTIFIER ::= { sysProductsOids 1023 }
|
||
|
|
edgeGate483D OBJECT IDENTIFIER ::= { sysProductsOids 1024 }
|
||
|
|
|
||
|
|
edgeGate201 OBJECT IDENTIFIER ::= { sysProductsOids 1031 }
|
||
|
|
edgeGate232 OBJECT IDENTIFIER ::= { sysProductsOids 1041 }
|
||
|
|
|
||
|
|
ac500 OBJECT IDENTIFIER ::= { sysProductsOids 1050 }
|
||
|
|
ac505 OBJECT IDENTIFIER ::= { ac500 1 }
|
||
|
|
ac512 OBJECT IDENTIFIER ::= { ac500 2 }
|
||
|
|
ac524 OBJECT IDENTIFIER ::= { ac500 3 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- sys/Interfaces Parameters
|
||
|
|
--
|
||
|
|
sysIntfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SysIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the interfaces module type."
|
||
|
|
::= { sysIntf 1 }
|
||
|
|
|
||
|
|
sysIntfEntry OBJECT-TYPE
|
||
|
|
SYNTAX SysIntfEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"sysIntfEntry"
|
||
|
|
INDEX { sysStackNo, sysSlotNo }
|
||
|
|
::= { sysIntfTable 1 }
|
||
|
|
|
||
|
|
SysIntfEntry ::= SEQUENCE {
|
||
|
|
sysStackNo UnitIndex,
|
||
|
|
sysSlotNo Integer32,
|
||
|
|
sysIntfUnitExist INTEGER,
|
||
|
|
sysIntfModule ModuleHwType
|
||
|
|
}
|
||
|
|
|
||
|
|
sysStackNo OBJECT-TYPE
|
||
|
|
SYNTAX UnitIndex
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the switch"
|
||
|
|
::= { sysIntfEntry 1 }
|
||
|
|
|
||
|
|
sysSlotNo OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..256)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This indicates a single instance of a slot"
|
||
|
|
::= { sysIntfEntry 2 }
|
||
|
|
|
||
|
|
sysIntfUnitExist OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
uninstalled(1),
|
||
|
|
installed(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This indicates interface module type"
|
||
|
|
::= { sysIntfEntry 3 }
|
||
|
|
|
||
|
|
sysIntfModule OBJECT-TYPE
|
||
|
|
SYNTAX ModuleHwType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This indicates interface module type"
|
||
|
|
::= { sysIntfEntry 4 }
|
||
|
|
|
||
|
|
sysSerialNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the device's serial number, which is entered during the manufacturing process.
|
||
|
|
"
|
||
|
|
::= { sysManufacturing 1 }
|
||
|
|
|
||
|
|
sysSwitchModel OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the equipment model"
|
||
|
|
::= { sysManufacturing 2 }
|
||
|
|
|
||
|
|
sysAssemblyNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the equipment assembly number"
|
||
|
|
::= { sysManufacturing 3 }
|
||
|
|
|
||
|
|
sysPartNumber OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the equipment part number"
|
||
|
|
::= { sysManufacturing 4 }
|
||
|
|
|
||
|
|
sysCLEI OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the common language equipment identification"
|
||
|
|
::= { sysManufacturing 5 }
|
||
|
|
|
||
|
|
sysHwRevision OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the HW revision"
|
||
|
|
::= { sysManufacturing 6 }
|
||
|
|
|
||
|
|
sysManufacturingDate OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the manufacturing date"
|
||
|
|
::= { sysManufacturing 7 }
|
||
|
|
|
||
|
|
sysSwitchSeries OBJECT-TYPE
|
||
|
|
SYNTAX Series
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object displays the switch series."
|
||
|
|
::= { sysSwitchingHW 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- config group
|
||
|
|
--
|
||
|
|
|
||
|
|
--
|
||
|
|
-- L2 Group
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- This group provides interface control and information not easily
|
||
|
|
-- available from other MIBs.
|
||
|
|
--
|
||
|
|
configL2 OBJECT IDENTIFIER ::= { config 2 }
|
||
|
|
|
||
|
|
configL2SpanOnOff OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enableSTP(1),
|
||
|
|
disable(2),
|
||
|
|
enableRSTP(3),
|
||
|
|
enablePVST(4),
|
||
|
|
enableMST(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables/disables Spanning Tree. When Spanning Tree is disabled, the switch's ports are placed in
|
||
|
|
forwarding mode, regardless of the current Spanning Tree state. When re-enabled, the normal state
|
||
|
|
transitions take place."
|
||
|
|
::= { configL2 1 }
|
||
|
|
|
||
|
|
configL2IfaceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ConfigL2IfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of Interfaces and their properties"
|
||
|
|
::= { configL2 2 }
|
||
|
|
|
||
|
|
configL2IfaceEntry OBJECT-TYPE
|
||
|
|
SYNTAX ConfigL2IfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index of interfaces."
|
||
|
|
INDEX { configL2IfaceUnit, configL2IfaceSlot,configL2IfacePort }
|
||
|
|
::= { configL2IfaceTable 1 }
|
||
|
|
|
||
|
|
ConfigL2IfaceEntry ::= SEQUENCE {
|
||
|
|
configL2IfaceUnit Integer32,
|
||
|
|
configL2IfaceSlot Integer32,
|
||
|
|
configL2IfacePort Integer32,
|
||
|
|
configL2IfaceName DisplayString,
|
||
|
|
configL2IfaceEnable INTEGER,
|
||
|
|
configL2IfaceSTPEnable INTEGER,
|
||
|
|
configL2IfaceDuplexSpeedSet INTEGER,
|
||
|
|
configL2IfaceFlow INTEGER,
|
||
|
|
configL2IfaceBackpressure INTEGER,
|
||
|
|
configL2IfaceResetCounters INTEGER,
|
||
|
|
configL2IfaceDefaultVID Integer32,
|
||
|
|
configL2IfaceSnifferIfIndex Integer32,
|
||
|
|
configL2TopologyChangeDetection TruthValue,
|
||
|
|
configL2IfaceDuplexModeSet INTEGER,
|
||
|
|
configL2IfaceSpeedSet INTEGER,
|
||
|
|
configL2IfaceBroadcastRateLimit Integer32,
|
||
|
|
configL2IfaceMulticastRateLimit Integer32,
|
||
|
|
configL2IfaceUnknownRateLimit Integer32,
|
||
|
|
configL2IfaceBroadcastBurstSize Integer32,
|
||
|
|
configL2IfaceMulticastBurstSize Integer32,
|
||
|
|
configL2IfaceUnknownBurstSize Integer32,
|
||
|
|
configL2IfaceMtu Integer32,
|
||
|
|
configL2IfaceAdminCrossOver INTEGER,
|
||
|
|
configL2IfaceRemoteFaultDetect INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
configL2IfaceUnit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies a unit in the
|
||
|
|
Interface Table."
|
||
|
|
::= { configL2IfaceEntry 1 }
|
||
|
|
|
||
|
|
configL2IfaceSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies a slot within the unit
|
||
|
|
in the Interface Table."
|
||
|
|
::= { configL2IfaceEntry 2 }
|
||
|
|
|
||
|
|
configL2IfacePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies a port within the slot
|
||
|
|
in the Interface Table."
|
||
|
|
::= { configL2IfaceEntry 3 }
|
||
|
|
|
||
|
|
configL2IfaceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The textual name of this interface, e.g., 'John'."
|
||
|
|
::= { configL2IfaceEntry 4 }
|
||
|
|
|
||
|
|
configL2IfaceEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables (1)or disables (2) control for the interface.
|
||
|
|
For this product, this is the ONLY way to enable or
|
||
|
|
disable the interface. 'ifAdminStatus' in RFC1213 and
|
||
|
|
'dot1dStpPortEnable' in RFC1493 are both implemented
|
||
|
|
as 'read-only'."
|
||
|
|
::= { configL2IfaceEntry 5 }
|
||
|
|
|
||
|
|
configL2IfaceSTPEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enables (1) and disables (2) Spanning Tree operation for this
|
||
|
|
interface."
|
||
|
|
::= { configL2IfaceEntry 6 }
|
||
|
|
|
||
|
|
configL2IfaceDuplexSpeedSet OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
autonegotiate(1),
|
||
|
|
half-10(2),
|
||
|
|
full-10(3),
|
||
|
|
half-100(4),
|
||
|
|
full-100(5),
|
||
|
|
half-1000(6),
|
||
|
|
full-1000(7),
|
||
|
|
pos-155(8),
|
||
|
|
pos-622(9),
|
||
|
|
full-10000(10),
|
||
|
|
half-auto(11),
|
||
|
|
full-auto(12),
|
||
|
|
auto-10(13),
|
||
|
|
auto-100(14),
|
||
|
|
auto-1000 (16),
|
||
|
|
illegal(99)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS obsolete
|
||
|
|
DESCRIPTION
|
||
|
|
"The desired speed and duplex mode for the interface. If the selected
|
||
|
|
control is not available for the interface, a value of illegal (99)
|
||
|
|
is returned. If the port type does NOT support the
|
||
|
|
default of autonegotiate (1), then the application will
|
||
|
|
initialize the port to a valid value (e.g., 1000full (6)).
|
||
|
|
Note that not all controls are available for all interfaces.
|
||
|
|
For example, only full-1000 (6) is available for Gigabit
|
||
|
|
Ethernet interfaces.
|
||
|
|
|
||
|
|
As this object was marked as obsolete the following two
|
||
|
|
configurable parameters of an interface should be used:
|
||
|
|
configL2IfaceDuplexModeSet, configL2IfaceSpeedSet "
|
||
|
|
::= { configL2IfaceEntry 7 }
|
||
|
|
|
||
|
|
configL2IfaceFlow OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
autonegotiate(1), -- only for giga
|
||
|
|
flowon(2),
|
||
|
|
flowoff(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The desired flow mode for the interface. If the selected control is not available
|
||
|
|
on the interface, a value of illegal (99) is returned. If the port type does NOT support
|
||
|
|
the default value of autonegotiate (1), then the application will initialize the port to a
|
||
|
|
valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces.
|
||
|
|
For example, only full-1000 (6) is available for Gigabit Ethernet interfaces."
|
||
|
|
::= { configL2IfaceEntry 8 }
|
||
|
|
|
||
|
|
configL2IfaceBackpressure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
backpressureon(1),
|
||
|
|
backpressureoff(2),
|
||
|
|
illegal(99)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The desired back-pressure mode for the interface.
|
||
|
|
If the selected control is not available on the interface,
|
||
|
|
a value of illegal (99) is returned."
|
||
|
|
::= { configL2IfaceEntry 9 }
|
||
|
|
|
||
|
|
configL2IfaceResetCounters OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noop(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object enables resetting the statistics counters selected for this
|
||
|
|
port."
|
||
|
|
::= { configL2IfaceEntry 10 }
|
||
|
|
|
||
|
|
configL2IfaceDefaultVID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..4095)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object sets the default VLAN ID according to 802.1Q."
|
||
|
|
::= { configL2IfaceEntry 11 }
|
||
|
|
|
||
|
|
configL2IfaceSnifferIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object connects this port to a sniffer port indexed by the specified ifIndex.
|
||
|
|
Setting this value to 0 disconnects this port from the sniffer."
|
||
|
|
::= { configL2IfaceEntry 12 }
|
||
|
|
|
||
|
|
configL2TopologyChangeDetection OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls the STP topology change detection for this interface."
|
||
|
|
::= { configL2IfaceEntry 13 }
|
||
|
|
|
||
|
|
configL2IfaceDuplexModeSet OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
full(2),
|
||
|
|
half(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The duplex mode for the interface. If the port type does NOT support
|
||
|
|
the default of autonegotiate (1), then the application will
|
||
|
|
initialize the port to a valid value (e.g., full (2))."
|
||
|
|
::= { configL2IfaceEntry 14 }
|
||
|
|
|
||
|
|
configL2IfaceSpeedSet OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
speed-10(2),
|
||
|
|
speed-100(3),
|
||
|
|
speed-1000(4),
|
||
|
|
speed-10000(5),
|
||
|
|
pos-155(6),
|
||
|
|
pos-622(7),
|
||
|
|
illegal(99)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The desired speed and duplex mode for the interface. If the selected
|
||
|
|
control is not available for the interface, a value of illegal (99)
|
||
|
|
is returned. If the port type does NOT support the
|
||
|
|
default of autonegotiate (1), then the application will
|
||
|
|
initialize the port to a valid value (e.g., 1000 (3)).
|
||
|
|
Note that not all controls are available for all interfaces.
|
||
|
|
For example, only 1000 (4) is available for Gigabit
|
||
|
|
Ethernet interfaces."
|
||
|
|
::= { configL2IfaceEntry 15 }
|
||
|
|
|
||
|
|
configL2IfaceBroadcastRateLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rate limit broadcast traffic. Must be a number between 64Kbps and 1Gbps,
|
||
|
|
specified in Kbps."
|
||
|
|
::= { configL2IfaceEntry 16 }
|
||
|
|
|
||
|
|
configL2IfaceMulticastRateLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rate limit multicast traffic. Must be a number between 64Kbps and 1Gbps,
|
||
|
|
specified in Kbps."
|
||
|
|
::= { configL2IfaceEntry 17 }
|
||
|
|
|
||
|
|
configL2IfaceUnknownRateLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Rate limit unknown traffic. Must be a number between 64Kbps and 1Gbps,
|
||
|
|
specified in Kbps. For detail information see documentation."
|
||
|
|
::= { configL2IfaceEntry 18 }
|
||
|
|
|
||
|
|
configL2IfaceBroadcastBurstSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Burst size broadcast traffic. Must be a number between 12Kbps and 1Mbps,
|
||
|
|
specified in Kbps."
|
||
|
|
::= { configL2IfaceEntry 19 }
|
||
|
|
|
||
|
|
configL2IfaceMulticastBurstSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Burst size multicast traffic. Must be a number between 12Kbps and 1Mbps,
|
||
|
|
specified in Kbps."
|
||
|
|
::= { configL2IfaceEntry 20 }
|
||
|
|
|
||
|
|
configL2IfaceUnknownBurstSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(-1..2147483647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Burst size unknown traffic. Must be a number between 12Kbps and 1Mbps,
|
||
|
|
specified in Kbps. For detail information see documentation."
|
||
|
|
::= { configL2IfaceEntry 21 }
|
||
|
|
|
||
|
|
configL2IfaceMtu OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (512..9216)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Maximum Transmission Unit (in octets) of the interface."
|
||
|
|
DEFVAL { 1528 }
|
||
|
|
::= { configL2IfaceEntry 22 }
|
||
|
|
|
||
|
|
configL2IfaceAdminCrossOver OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
mdi(2),
|
||
|
|
mdi-x(3),
|
||
|
|
unsupported(255)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative MDI/MDI-X cable connection status of ports, as specified in IEEE 803.2.
|
||
|
|
The mdi-x mode (crossover) is configured (3), the interface works in MDI-X mode.
|
||
|
|
The mdi mode (2) defines port to work in standard MDI mode.
|
||
|
|
The auto (1) defines automatic crossover detection, and any type of MDI/MDI-X cabling can be used on the port.
|
||
|
|
Note: This attribute can be configured only on interfaces that support that option."
|
||
|
|
::= { configL2IfaceEntry 23 }
|
||
|
|
|
||
|
|
configL2IfaceRemoteFaultDetect OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enableRemoteFaultDetect(1),
|
||
|
|
disableRemoteFaultDetect(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the remote fault detection on interfaces, connected to 100Base Fiber pair.
|
||
|
|
Once enabled (1), the switch will indicate link-down event on the interface, once remote
|
||
|
|
peer detects link down.
|
||
|
|
Note: Relevant only on 100Base Fiber interfaces."
|
||
|
|
::= { configL2IfaceEntry 24 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- reports group
|
||
|
|
--
|
||
|
|
reportsL2 OBJECT IDENTIFIER ::= { reports 1 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- L2 Group
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- This group provides interface information not easily
|
||
|
|
-- available from other MIBs.
|
||
|
|
--
|
||
|
|
|
||
|
|
reportsL2IfaceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ReportsL2IfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of Interfaces and their properties"
|
||
|
|
::= { reportsL2 1 }
|
||
|
|
|
||
|
|
reportsL2IfaceEntry OBJECT-TYPE
|
||
|
|
SYNTAX ReportsL2IfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index of interfaces."
|
||
|
|
INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot,reportsL2IfacePort }
|
||
|
|
::= { reportsL2IfaceTable 1 }
|
||
|
|
|
||
|
|
ReportsL2IfaceEntry ::= SEQUENCE {
|
||
|
|
reportsL2IfaceUnit Integer32,
|
||
|
|
reportsL2IfaceSlot Integer32,
|
||
|
|
reportsL2IfacePort Integer32,
|
||
|
|
reportsL2IfaceBridgeIndex Integer32,
|
||
|
|
reportsL2IfaceType INTEGER,
|
||
|
|
reportsL2IfaceLink INTEGER,
|
||
|
|
reportsL2IfaceDuplexSpeedGet INTEGER,
|
||
|
|
reportsL2IfaceTXOctetsNoErr Counter32,
|
||
|
|
reportsL2IfaceTXPacketsNoErr Counter32,
|
||
|
|
reportsL2IfaceRXOctetsNoErr Counter32,
|
||
|
|
reportsL2IfaceRXPacketsNoErr Counter32,
|
||
|
|
reportsL2IfaceIfInOctets Counter32,
|
||
|
|
reportsL2IfaceIfInUcastPkts Counter32,
|
||
|
|
reportsL2IfaceIfInNUcastPkts Counter32,
|
||
|
|
reportsL2IfaceIfInDiscards Counter32,
|
||
|
|
reportsL2IfaceIfInErrors Counter32,
|
||
|
|
reportsL2IfaceIfInUnknownProtos Counter32,
|
||
|
|
reportsL2IfaceIfOutOctets Counter32,
|
||
|
|
reportsL2IfaceIfOutUcastPkts Counter32,
|
||
|
|
reportsL2IfaceIfOutNUcastPkts Counter32,
|
||
|
|
reportsL2IfaceIfOutDiscards Counter32,
|
||
|
|
reportsL2IfaceIfOutErrors Counter32,
|
||
|
|
reportsL2IfaceStatsDropEvents Counter32,
|
||
|
|
reportsL2IfaceStatsOctets Counter32,
|
||
|
|
reportsL2IfaceStatsPkts Counter32,
|
||
|
|
reportsL2IfaceStatsBroadcastPkts Counter32,
|
||
|
|
reportsL2IfaceStatsMulticastPkts Counter32,
|
||
|
|
reportsL2IfaceStatsCRCAlignErrors Counter32,
|
||
|
|
reportsL2IfaceStatsUndersizePkts Counter32,
|
||
|
|
reportsL2IfaceStatsOversizePkts Counter32,
|
||
|
|
reportsL2IfaceStatsFragments Counter32,
|
||
|
|
reportsL2IfaceStatsJabbers Counter32,
|
||
|
|
reportsL2IfaceStatsCollisions Counter32,
|
||
|
|
reportsL2IfaceStatsPkts64Octets Counter32,
|
||
|
|
reportsL2IfaceStatsPkts65to127Octets Counter32,
|
||
|
|
reportsL2IfaceStatsPkts128to255Octets Counter32,
|
||
|
|
reportsL2IfaceStatsPkts256to511Octets Counter32,
|
||
|
|
reportsL2IfaceStatsPkts512to1023Octets Counter32,
|
||
|
|
reportsL2IfaceStatsPkts1024to1518Octets Counter32,
|
||
|
|
reportsL2IfaceFlow INTEGER,
|
||
|
|
reportsL2IfaceHWType ModuleHwType,
|
||
|
|
reportsL2IfaceActiveJackIndex Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
reportsL2IfaceUnit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies a unit in the
|
||
|
|
Interface Table."
|
||
|
|
::= { reportsL2IfaceEntry 1 }
|
||
|
|
|
||
|
|
reportsL2IfaceSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies a slot within the unit
|
||
|
|
in the Interface Table."
|
||
|
|
::= { reportsL2IfaceEntry 2 }
|
||
|
|
|
||
|
|
reportsL2IfacePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies a port within the slot
|
||
|
|
in the Interface Table."
|
||
|
|
::= { reportsL2IfaceEntry 3 }
|
||
|
|
|
||
|
|
reportsL2IfaceBridgeIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the bridge index of this port."
|
||
|
|
::= { reportsL2IfaceEntry 4 }
|
||
|
|
|
||
|
|
reportsL2IfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
regular1822(2),
|
||
|
|
hdh1822(3),
|
||
|
|
ddn-x25(4),
|
||
|
|
rfc877-x25(5),
|
||
|
|
ethernet-csmacd(6),
|
||
|
|
iso88023-csmacd(7),
|
||
|
|
iso88024-tokenBus(8),
|
||
|
|
iso88025-tokenRing(9),
|
||
|
|
iso88026-man(10),
|
||
|
|
starLan(11),
|
||
|
|
proteon-10Mbit(12),
|
||
|
|
proteon-80Mbit(13),
|
||
|
|
hyperchannel(14),
|
||
|
|
fddi(15),
|
||
|
|
lapb(16),
|
||
|
|
sdlc(17),
|
||
|
|
ds1(18), -- T-1
|
||
|
|
e1(19), -- European equivalent of T-1
|
||
|
|
basicISDN(20),
|
||
|
|
primaryISDN(21), -- proprietary serial
|
||
|
|
propPointToPointSerial(22),
|
||
|
|
ppp(23),
|
||
|
|
softwareLoopback(24),
|
||
|
|
eon(25), -- CLNP over IP [11]
|
||
|
|
ethernet-3Mbit(26),
|
||
|
|
nsip(27), -- XNS over IP
|
||
|
|
slip(28), -- generic SLIP
|
||
|
|
ultra(29), -- ULTRA technologies
|
||
|
|
ds3(30), -- T-3
|
||
|
|
sip(31), -- SMDS
|
||
|
|
frame-relay(32)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of interface, repeated here from the definitions
|
||
|
|
in RFC1213 as a matter of convenience."
|
||
|
|
::= { reportsL2IfaceEntry 5 }
|
||
|
|
|
||
|
|
reportsL2IfaceLink OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1),
|
||
|
|
down(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of Link Detect on the interface."
|
||
|
|
::= { reportsL2IfaceEntry 6 }
|
||
|
|
|
||
|
|
reportsL2IfaceDuplexSpeedGet OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
half-10(2),
|
||
|
|
full-10(3),
|
||
|
|
half-100(4),
|
||
|
|
full-100(5),
|
||
|
|
half-1000(6),
|
||
|
|
full-1000(7),
|
||
|
|
pos-155(8),
|
||
|
|
pos-622(9),
|
||
|
|
full-10000(10),
|
||
|
|
illegal(99)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The actual speed and duplex for the interface. If the
|
||
|
|
interface is not configured to one of the acceptable
|
||
|
|
values, a value of illegal (99) is returned."
|
||
|
|
::= { reportsL2IfaceEntry 7 }
|
||
|
|
|
||
|
|
reportsL2IfaceTXOctetsNoErr OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets transmitted from the interface. This
|
||
|
|
number does not include octets with errors."
|
||
|
|
::= { reportsL2IfaceEntry 8 }
|
||
|
|
|
||
|
|
reportsL2IfaceTXPacketsNoErr OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets transmitted from the interface. This
|
||
|
|
number does not include packets with errors."
|
||
|
|
::= { reportsL2IfaceEntry 9 }
|
||
|
|
|
||
|
|
reportsL2IfaceRXOctetsNoErr OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets received on the interface. This
|
||
|
|
number does not include octets with errors."
|
||
|
|
::= { reportsL2IfaceEntry 10 }
|
||
|
|
|
||
|
|
reportsL2IfaceRXPacketsNoErr OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received on the interface. This
|
||
|
|
number does not include packets with errors."
|
||
|
|
::= { reportsL2IfaceEntry 11 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received on the
|
||
|
|
interface, including framing characters."
|
||
|
|
::= { reportsL2IfaceEntry 12 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfInUcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of subnetwork-unicast packets
|
||
|
|
delivered to a higher-layer protocol."
|
||
|
|
::= { reportsL2IfaceEntry 13 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfInNUcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of non-unicast (i.e., subnetwork-
|
||
|
|
broadcast or subnetwork-multicast) packets
|
||
|
|
delivered to a higher-layer protocol."
|
||
|
|
::= { reportsL2IfaceEntry 14 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfInDiscards OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of inbound packets that were chosen
|
||
|
|
to be discarded even if no errors that prevent their deliverability
|
||
|
|
to a higher-layer protocol had been detected. One possible reason for
|
||
|
|
discarding such a packet could be to free buffer space."
|
||
|
|
::= { reportsL2IfaceEntry 15 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfInErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of inbound packets that contained
|
||
|
|
errors preventing them from being deliverable to a
|
||
|
|
higher-layer protocol."
|
||
|
|
::= { reportsL2IfaceEntry 16 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfInUnknownProtos OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received via the interface
|
||
|
|
that were discarded because of an unknown or
|
||
|
|
unsupported protocol."
|
||
|
|
::= { reportsL2IfaceEntry 17 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets transmitted out of the
|
||
|
|
interface, including framing characters."
|
||
|
|
::= { reportsL2IfaceEntry 18 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfOutUcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets that higher-level
|
||
|
|
protocols requested to be transmitted to a
|
||
|
|
subnetwork-unicast address, including those that
|
||
|
|
were discarded or not sent."
|
||
|
|
::= { reportsL2IfaceEntry 19 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfOutNUcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets that higher-level
|
||
|
|
protocols requested to be transmitted to a non-
|
||
|
|
unicast (i.e., a subnetwork-broadcast or
|
||
|
|
subnetwork-multicast) address, including those
|
||
|
|
that were discarded or not sent."
|
||
|
|
::= { reportsL2IfaceEntry 20 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfOutDiscards OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of outbound packets that were chosen
|
||
|
|
to be discarded even if no errors that prevented their
|
||
|
|
transmission had been detected. One
|
||
|
|
possible reason for discarding such a packet could
|
||
|
|
be to free up buffer space."
|
||
|
|
::= { reportsL2IfaceEntry 21 }
|
||
|
|
|
||
|
|
reportsL2IfaceIfOutErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of outbound packets that could not be
|
||
|
|
transmitted because of errors."
|
||
|
|
::= { reportsL2IfaceEntry 22 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsDropEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of events in which packets
|
||
|
|
were dropped by the probe due to lack of resources.
|
||
|
|
Note that this number is not necessarily the number of
|
||
|
|
packets dropped; it is just the number of times this
|
||
|
|
condition has been detected."
|
||
|
|
::= { reportsL2IfaceEntry 23 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets of data (including
|
||
|
|
those in bad packets) received on the
|
||
|
|
network (excluding framing bits but including
|
||
|
|
FCS octets).
|
||
|
|
|
||
|
|
This object can be used as a reasonable estimate of
|
||
|
|
Ethernet utilization. If greater precision is
|
||
|
|
desired, the etherStatsPkts and etherStatsOctets
|
||
|
|
objects should be sampled before and after a common
|
||
|
|
interval. The differences in the sampled values are
|
||
|
|
Pkts and Octets, respectively, and the number of
|
||
|
|
seconds in the interval is Interval. These values
|
||
|
|
are used to calculate the Utilization as follows:
|
||
|
|
|
||
|
|
Pkts * (9.6 + 6.4) + (Octets * .8)
|
||
|
|
Utilization = -------------------------------------
|
||
|
|
Interval * 10,000
|
||
|
|
|
||
|
|
The result of this equation is the Ethernet segment utilization
|
||
|
|
which is the percent utilization of the ethernet
|
||
|
|
segment on a 0 to 100 percent scale."
|
||
|
|
::= { reportsL2IfaceEntry 24 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad packets,
|
||
|
|
broadcast packets, and multicast packets) received."
|
||
|
|
::= { reportsL2IfaceEntry 25 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsBroadcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of good packets received that were
|
||
|
|
directed to the broadcast address. Note that this
|
||
|
|
does not include multicast packets."
|
||
|
|
::= { reportsL2IfaceEntry 26 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsMulticastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of good packets received that were
|
||
|
|
directed to a multicast address. Note that this
|
||
|
|
number does not include packets directed to the
|
||
|
|
broadcast address."
|
||
|
|
::= { reportsL2IfaceEntry 27 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsCRCAlignErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that
|
||
|
|
had a length (excluding framing bits, but
|
||
|
|
including FCS octets) of between 64 and 1518
|
||
|
|
octets, inclusive, but had either a bad
|
||
|
|
Frame Check Sequence (FCS) with an integral
|
||
|
|
number of octets (FCS Error) or a bad FCS with
|
||
|
|
a non-integral number of octets (Alignment Error)."
|
||
|
|
::= { reportsL2IfaceEntry 28 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsUndersizePkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were
|
||
|
|
less than 64 octets long (excluding framing bits,
|
||
|
|
but including FCS octets) and were otherwise well
|
||
|
|
formed."
|
||
|
|
::= { reportsL2IfaceEntry 29 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsOversizePkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were
|
||
|
|
longer than 1518 octets (excluding framing bits,
|
||
|
|
but including FCS octets) and were otherwise
|
||
|
|
well formed."
|
||
|
|
::= { reportsL2IfaceEntry 30 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were less
|
||
|
|
than 64 octets in length (excluding framing bits but
|
||
|
|
including FCS octets) and had either a bad Frame
|
||
|
|
Check Sequence (FCS) with an integral number of
|
||
|
|
octets (FCS Error) or a bad FCS with a non-integral
|
||
|
|
number of octets (Alignment Error).
|
||
|
|
|
||
|
|
Note that it is entirely normal for
|
||
|
|
etherStatsFragments to increment. This is because
|
||
|
|
it counts both runts (which are normal occurrences
|
||
|
|
due to collisions) and noise hits."
|
||
|
|
::= { reportsL2IfaceEntry 31 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsJabbers OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were
|
||
|
|
longer than 1518 octets (excluding framing bits,
|
||
|
|
but including FCS octets), and had either a bad
|
||
|
|
Frame Check Sequence (FCS) with an integral number
|
||
|
|
of octets (FCS Error) or a bad FCS with a
|
||
|
|
non-integral number of octets (Alignment Error).
|
||
|
|
|
||
|
|
Note that this definition of jabber is different
|
||
|
|
from the definition in IEEE-802.3 section 8.2.1.5
|
||
|
|
(10BASE5) and section 10.3.1.4 (10BASE2). These
|
||
|
|
documents define jabber as the condition in which any
|
||
|
|
packet exceeds 20 ms. The allowed range to detect
|
||
|
|
jabber is between 20 ms and 150 ms."
|
||
|
|
::= { reportsL2IfaceEntry 32 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsCollisions OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The best estimate of the total number of collisions
|
||
|
|
on this Ethernet segment.
|
||
|
|
|
||
|
|
The value returned will depend on the RMON probe's location.
|
||
|
|
Sections 8.2.1.3 (10BASE-5) and 10.3.1.3 (10BASE-2) of
|
||
|
|
IEEE standard 802.3 states that a station must detect a collision in
|
||
|
|
the receive mode if three or more stations are
|
||
|
|
transmitting simultaneously. A repeater port must
|
||
|
|
detect a collision when two or more stations are
|
||
|
|
transmitting simultaneously. Thus a probe placed on
|
||
|
|
a repeater port could record more collisions than a
|
||
|
|
probe connected to a station on the same segment
|
||
|
|
would.
|
||
|
|
|
||
|
|
Probe location plays a much smaller role when
|
||
|
|
considering 10BASE-T. Section 14.2.1.4 (10BASE-T) of IEEE
|
||
|
|
standard 802.3 defines a collision as the
|
||
|
|
simultaneous presence of signals on the DO and RD
|
||
|
|
circuits (transmitting and receiving at the same
|
||
|
|
time). A 10BASE-T station can only detect
|
||
|
|
collisions when it is transmitting. Thus probes
|
||
|
|
placed on a station and a repeater, should report
|
||
|
|
the same number of collisions.
|
||
|
|
|
||
|
|
Note also that an RMON probe inside a repeater
|
||
|
|
should ideally report collisions between the
|
||
|
|
repeater and one or more other hosts (transmit
|
||
|
|
collisions as defined by IEEE 802.3k) plus receiver
|
||
|
|
collisions observed on any coaxial segments to which
|
||
|
|
the repeater is connected."
|
||
|
|
::= { reportsL2IfaceEntry 33 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts64Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were 64 octets in length
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { reportsL2IfaceEntry 34 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts65to127Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
65 and 127 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { reportsL2IfaceEntry 35 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts128to255Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
128 and 255 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { reportsL2IfaceEntry 36 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts256to511Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
256 and 511 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { reportsL2IfaceEntry 37 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts512to1023Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
512 and 1023 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { reportsL2IfaceEntry 38 }
|
||
|
|
|
||
|
|
reportsL2IfaceStatsPkts1024to1518Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
1024 and 1518 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { reportsL2IfaceEntry 39 }
|
||
|
|
|
||
|
|
reportsL2IfaceFlow OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
flowon(2),
|
||
|
|
flowoff(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The flow control for the interface."
|
||
|
|
::= { reportsL2IfaceEntry 40 }
|
||
|
|
|
||
|
|
reportsL2IfaceHWType OBJECT-TYPE
|
||
|
|
SYNTAX ModuleHwType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The HW type of the interface."
|
||
|
|
::= { reportsL2IfaceEntry 41 }
|
||
|
|
|
||
|
|
reportsL2IfaceActiveJackIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current active jack index."
|
||
|
|
::= { reportsL2IfaceEntry 42 }
|
||
|
|
|
||
|
|
reportsHardware OBJECT IDENTIFIER ::= { reports 2 }
|
||
|
|
--
|
||
|
|
-- Hardware Group
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- This group provides general hardware information not from other MIBs.
|
||
|
|
--
|
||
|
|
|
||
|
|
reportsHardwarePSStatus OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (1..16))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each OCTET holds the status of 1 power supply or if supported,
|
||
|
|
a status of its corresponding power supply fan. Every octet can
|
||
|
|
show one of the following states:
|
||
|
|
0 - power supply not installed;
|
||
|
|
1 - power supply is installed but does not function correctly;
|
||
|
|
2 - power supply is installed and working OK;
|
||
|
|
There are devices, which can also show status of the Fan,
|
||
|
|
attached to the power supply. All devices which support the Power
|
||
|
|
Supply fan, will display their status in series of octet pairs.
|
||
|
|
The fan status octet will be displayed right after the supply
|
||
|
|
status octet. "
|
||
|
|
::= { reportsHardware 1 }
|
||
|
|
|
||
|
|
reportsHardwareFanStatus OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (1..16))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each OCTET holds the status of 1 fan
|
||
|
|
0 - Fan stopped
|
||
|
|
1 - Fan failed
|
||
|
|
2 - Fan OK"
|
||
|
|
::= { reportsHardware 2 }
|
||
|
|
|
||
|
|
reportsHardwareTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The internal temperature of the unit in degrees Celsius."
|
||
|
|
::= { reportsHardware 3 }
|
||
|
|
|
||
|
|
reportsHardwarePSVoltage OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (1..16))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each OCTET holds the voltage of a corresponding power supply. Every octet can
|
||
|
|
show one of the following states:
|
||
|
|
0 - power supply not installed or voltage information is not supported;
|
||
|
|
1-C - power supply in V, hexadecimal;"
|
||
|
|
::= { reportsHardware 4 }
|
||
|
|
|
||
|
|
reportsHardwareTemperatureScale OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { celsius(1),
|
||
|
|
fahrenheit(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Displays the scale used - Celsius (Centigrade) or Fahrenheit when measuring CPU temperature. The value of this object determines the type of scale used for the values of reportsHardwareTemperature and reportsHardwareTemperatureHighLimit objects."
|
||
|
|
DEFVAL { celsius }
|
||
|
|
::= { reportsHardware 5 }
|
||
|
|
|
||
|
|
reportsHardwareTemperatureHighLimit OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (20..70)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Displays the highest allowed Celsius (Centigrade) or Fahrenheit temperature at the unit CPU area. When this limit is reached an SNMP notification is sent."
|
||
|
|
DEFVAL { 55 }
|
||
|
|
-- Default value in Celsius is 55, or 131 in Fahrenheit; Allowed range is <20-70> for Celsius, <68-158> in Fahrenheit
|
||
|
|
::= { reportsHardware 6 }
|
||
|
|
|
||
|
|
reportsHardwareDoorStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (0..2)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of door
|
||
|
|
0 - Door not installed
|
||
|
|
1 - Door open
|
||
|
|
2 - Door closed"
|
||
|
|
::= { reportsHardware 7 }
|
||
|
|
|
||
|
|
reportsIfJack OBJECT IDENTIFIER ::= { reports 3 }
|
||
|
|
--
|
||
|
|
-- Hardware Group
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- This group provides general hardware information not from other MIBs.
|
||
|
|
--
|
||
|
|
|
||
|
|
reportsIfJackTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ReportsIfJackEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Information about the external jacks attached to
|
||
|
|
MAUs attached to an interface."
|
||
|
|
::= { reportsIfJack 2 }
|
||
|
|
|
||
|
|
reportsIfJackEntry OBJECT-TYPE
|
||
|
|
SYNTAX ReportsIfJackEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the table, containing information
|
||
|
|
about a particular jack."
|
||
|
|
INDEX { reportsL2IfaceUnit,reportsL2IfaceSlot,
|
||
|
|
reportsL2IfacePort,reportsIfJackIndex }
|
||
|
|
::= { reportsIfJackTable 1 }
|
||
|
|
|
||
|
|
ReportsIfJackEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
reportsIfJackIndex Integer32,
|
||
|
|
reportsIfJackType ModuleHwType
|
||
|
|
}
|
||
|
|
|
||
|
|
reportsIfJackIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable uniquely identifies the jack
|
||
|
|
described by this entry from among other jacks
|
||
|
|
attached to the same MAU."
|
||
|
|
::= { reportsIfJackEntry 1 }
|
||
|
|
|
||
|
|
reportsIfJackType OBJECT-TYPE
|
||
|
|
SYNTAX ModuleHwType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The jack connector type, as it appears on the
|
||
|
|
outer side of the system."
|
||
|
|
::= { reportsIfJackEntry 2 }
|
||
|
|
|
||
|
|
-- Notifications for use by prvtSwitchMib
|
||
|
|
|
||
|
|
cpuTemperatureExceeded NOTIFICATION-TYPE
|
||
|
|
OBJECTS { reportsHardwareTemperature }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The cpuTemperatuteExceeded trap indicates that the sending
|
||
|
|
agent senses that the internal temperature has passed the
|
||
|
|
program threshold."
|
||
|
|
::= {prvtSwitchNotifications 1}
|
||
|
|
|
||
|
|
powerSupplyStatusChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { reportsHardwarePSStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The powerSupplyStatusChange trap indicates that the sending
|
||
|
|
agent senses a change in the status of one of the power supplies."
|
||
|
|
::= {prvtSwitchNotifications 2}
|
||
|
|
|
||
|
|
fanStatusChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { reportsHardwareFanStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The fanStatusChange trap indicates that the sending
|
||
|
|
agent senses a change in the status of one of the fans."
|
||
|
|
::= {prvtSwitchNotifications 3}
|
||
|
|
|
||
|
|
portSecurityViolation NOTIFICATION-TYPE
|
||
|
|
OBJECTS { ifIndex }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port security violation notification indicates that a port security violation has been detected, e.g more MAC adresses have been learned on that port than the number allowed."
|
||
|
|
::= { prvtSwitchNotifications 4}
|
||
|
|
|
||
|
|
portRedundantLinkChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { ifAdminStatus, ifOperStatus, reportsL2IfaceLink }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port redundant link change notification indicates that the physical state of a redundant (i.e.
|
||
|
|
blocked or discarding) link has changed from link-up
|
||
|
|
to link down or vice versa."
|
||
|
|
::= { prvtSwitchNotifications 5}
|
||
|
|
|
||
|
|
sysIntfModuleChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { sysIntfModule}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The System Interface Module change notification indicates
|
||
|
|
that the physical status of a module in the
|
||
|
|
unit has changed."
|
||
|
|
::= { prvtSwitchNotifications 6}
|
||
|
|
|
||
|
|
prvtLogNotifyFull NOTIFICATION-TYPE
|
||
|
|
-- OBJECTS { }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Log buffer is almost full."
|
||
|
|
::= { prvtSwitchNotifications 7}
|
||
|
|
|
||
|
|
doorStatusChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS { reportsHardwareDoorStatus }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The doorStatusChange trap indicates that the sending
|
||
|
|
agent senses a change in the status of the door."
|
||
|
|
::= {prvtSwitchNotifications 8}
|
||
|
|
|
||
|
|
-- *******************************************************************
|
||
|
|
-- Conformance Information
|
||
|
|
-- *******************************************************************
|
||
|
|
|
||
|
|
prvtSwitchMIBGroups OBJECT IDENTIFIER ::= { prvtSwitchConformance 2 }
|
||
|
|
|
||
|
|
prvtSwitchNotificationGroup NOTIFICATION-GROUP
|
||
|
|
NOTIFICATIONS {
|
||
|
|
cpuTemperatureExceeded,
|
||
|
|
powerSupplyStatusChange,
|
||
|
|
fanStatusChange,
|
||
|
|
portSecurityViolation,
|
||
|
|
portRedundantLinkChange,
|
||
|
|
sysIntfModuleChange,
|
||
|
|
doorStatusChange
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Private Notification Group."
|
||
|
|
::= { prvtSwitchMIBGroups 3 }
|
||
|
|
|
||
|
|
END
|