537 lines
19 KiB
Plaintext
537 lines
19 KiB
Plaintext
|
-- *********************************************************************
|
||
|
|
-- **
|
||
|
|
-- ** BATM Advanced Communications.
|
||
|
|
-- **
|
||
|
|
-- *********************************************************************
|
||
|
|
-- ** Filename: PRVT-EPS-MIB.mib
|
||
|
|
-- ** Project: T-Metro Switches.
|
||
|
|
-- ** Purpose: Private MIB
|
||
|
|
-- *********************************************************************
|
||
|
|
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
|
||
|
|
-- WARNING:
|
||
|
|
--
|
||
|
|
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
|
||
|
|
--
|
||
|
|
-- This file is the property of BATM Advanced Communications and contains
|
||
|
|
-- proprietary and confidential information. This file is made
|
||
|
|
-- available to authorized BATM customers on the express
|
||
|
|
-- condition that neither it, nor any of the information contained
|
||
|
|
-- therein, shall be disclosed to third parties or be used for any
|
||
|
|
-- purpose other than to replace, modify or upgrade firmware and/or
|
||
|
|
-- software components of BATM manufactured equipment within the
|
||
|
|
-- authorized customer's network, and that such transfer be
|
||
|
|
-- completed in accordance with the instructions provided by
|
||
|
|
-- BATM. Any other use is strictly prohibited.
|
||
|
|
--
|
||
|
|
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
|
||
|
|
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
|
||
|
|
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||
|
|
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
|
||
|
|
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
||
|
|
--
|
||
|
|
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
|
||
|
|
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
|
||
|
|
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
|
||
|
|
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
|
||
|
|
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
|
||
|
|
--
|
||
|
|
-- ----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
PRVT-EPS-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
switch
|
||
|
|
FROM PRVT-SWITCH-MIB
|
||
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
RowStatus, TEXTUAL-CONVENTION, TruthValue
|
||
|
|
FROM SNMPv2-TC;
|
||
|
|
|
||
|
|
prvtEpsMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201011110000Z"
|
||
|
|
ORGANIZATION
|
||
|
|
"BATM Advanced Communication"
|
||
|
|
CONTACT-INFO
|
||
|
|
"BATM/Telco Systems Support team
|
||
|
|
Email:
|
||
|
|
For North America: techsupport@telco.com
|
||
|
|
For North Europe: support@batm.de, info@batm.de
|
||
|
|
For the rest of the world: techsupport@telco.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"Private MIB supporting Linear Ethernet Protection Switching (ITU-T G.8031)"
|
||
|
|
REVISION "201011110000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial"
|
||
|
|
::= { switch 132 }
|
||
|
|
|
||
|
|
|
||
|
|
PrvtEpsProtectionStateType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Possible protection states for an end device."
|
||
|
|
SYNTAX INTEGER { none(-1), noRequest(0), doNotRevert(1),
|
||
|
|
reverseRequest(2), exercise(4), waitToRestore(5),
|
||
|
|
clear(6), manualSwitch(7), signalDegrade(9),
|
||
|
|
signalFail(11), forcedSwitch(13),
|
||
|
|
signalFailForProtection(14), lockoutOfProtection(15) }
|
||
|
|
|
||
|
|
PrvtEpsActionType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Used to perform an action.
|
||
|
|
Setting to 'performAction' will cause the action to be performed.
|
||
|
|
Setting to 'idle' (or any other value except 'performAction') has
|
||
|
|
no effect (no action is performed).
|
||
|
|
Reads will always return 'idle'."
|
||
|
|
SYNTAX INTEGER { idle(1), performAction(2) }
|
||
|
|
|
||
|
|
prvtEpsMIBNotifications OBJECT IDENTIFIER
|
||
|
|
::= { prvtEpsMIB 0 }
|
||
|
|
|
||
|
|
prvtEpsMIBObjects OBJECT IDENTIFIER
|
||
|
|
::= { prvtEpsMIB 1 }
|
||
|
|
|
||
|
|
prvtEpsService OBJECT IDENTIFIER
|
||
|
|
::= { prvtEpsMIBObjects 1 }
|
||
|
|
|
||
|
|
prvtEpsServiceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtEpsServiceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains Ethernet Protection Switching services information."
|
||
|
|
::= { prvtEpsService 1 }
|
||
|
|
|
||
|
|
prvtEpsServiceEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsServiceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Ethernet Protection Switching information about a specific service."
|
||
|
|
INDEX { prvtEpsSvcId }
|
||
|
|
::= { prvtEpsServiceTable 1 }
|
||
|
|
|
||
|
|
PrvtEpsServiceEntry ::= SEQUENCE {
|
||
|
|
prvtEpsSvcId Unsigned32,
|
||
|
|
prvtEpsServiceRowStatus RowStatus,
|
||
|
|
prvtEpsServiceCfmMdLevel Unsigned32,
|
||
|
|
prvtEpsServicePrimaryLocalCfmMep Unsigned32,
|
||
|
|
prvtEpsServicePrimaryRemoteCfmMep Unsigned32,
|
||
|
|
prvtEpsServiceSecondaryLocalCfmMep Unsigned32,
|
||
|
|
prvtEpsServiceSecondaryRemoteCfmMep Unsigned32,
|
||
|
|
prvtEpsServiceSignalDegradeCfmTestId Unsigned32,
|
||
|
|
prvtEpsServiceRevertive TruthValue,
|
||
|
|
prvtEpsServiceHoldOffTimer Unsigned32,
|
||
|
|
prvtEpsServiceWaitToRestoreTimer Unsigned32,
|
||
|
|
prvtEpsServiceAdminFreeze TruthValue,
|
||
|
|
prvtEpsServiceAdminStatus INTEGER,
|
||
|
|
prvtEpsServiceActivePath INTEGER,
|
||
|
|
prvtEpsServiceDefectsPresent BITS,
|
||
|
|
prvtEpsServiceLocalState PrvtEpsProtectionStateType,
|
||
|
|
prvtEpsServiceOperationalStatus TruthValue,
|
||
|
|
prvtEpsServiceLastEvent INTEGER,
|
||
|
|
prvtEpsServicePrimaryStatus INTEGER,
|
||
|
|
prvtEpsServiceSecondaryStatus INTEGER,
|
||
|
|
prvtEpsServiceRemoteState PrvtEpsProtectionStateType,
|
||
|
|
prvtEpsServiceRemoteApsChannel INTEGER,
|
||
|
|
prvtEpsServiceRemoteProtection INTEGER,
|
||
|
|
prvtEpsServiceRemoteDirection INTEGER,
|
||
|
|
prvtEpsServiceRemoteRevertive INTEGER,
|
||
|
|
prvtEpsServiceLocalApsChannel INTEGER,
|
||
|
|
prvtEpsServiceLocalProtection INTEGER,
|
||
|
|
prvtEpsServiceLocalDirection INTEGER,
|
||
|
|
prvtEpsServiceClear PrvtEpsActionType,
|
||
|
|
prvtEpsServiceManualSwitch PrvtEpsActionType,
|
||
|
|
prvtEpsServiceForcedSwitch PrvtEpsActionType,
|
||
|
|
prvtEpsServiceLockout PrvtEpsActionType,
|
||
|
|
prvtEpsServiceProtectionCounter Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtEpsSvcId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..4294967294)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The service ID."
|
||
|
|
::= { prvtEpsServiceEntry 1 }
|
||
|
|
|
||
|
|
prvtEpsServiceRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the row.
|
||
|
|
The writable columns in a row can not be changed if the row
|
||
|
|
is active. All columns must have a valid value before a row
|
||
|
|
can be activated."
|
||
|
|
::= { prvtEpsServiceEntry 2 }
|
||
|
|
|
||
|
|
prvtEpsServiceCfmMdLevel OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Value of the CFM MD level where the protected domain is situated."
|
||
|
|
::= { prvtEpsServiceEntry 3 }
|
||
|
|
|
||
|
|
prvtEpsServicePrimaryLocalCfmMep OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..8191)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Primary local CFM MEP Id."
|
||
|
|
::= { prvtEpsServiceEntry 4 }
|
||
|
|
|
||
|
|
prvtEpsServicePrimaryRemoteCfmMep OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..8191)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Primary remote CFM MEP Id."
|
||
|
|
::= { prvtEpsServiceEntry 5 }
|
||
|
|
|
||
|
|
prvtEpsServiceSecondaryLocalCfmMep OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..8191)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Backup local CFM MEP Id."
|
||
|
|
::= { prvtEpsServiceEntry 6 }
|
||
|
|
|
||
|
|
prvtEpsServiceSecondaryRemoteCfmMep OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..8191)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Backup remote CFM MEP Id."
|
||
|
|
::= { prvtEpsServiceEntry 7 }
|
||
|
|
|
||
|
|
prvtEpsServiceSignalDegradeCfmTestId OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..256)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ID of the test used for monitoring (either CFM or SAA test).
|
||
|
|
The value 0 indicates no test."
|
||
|
|
::= { prvtEpsServiceEntry 8 }
|
||
|
|
|
||
|
|
prvtEpsServiceRevertive OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Protection type (revertive or non-revertive)."
|
||
|
|
::= { prvtEpsServiceEntry 9 }
|
||
|
|
|
||
|
|
prvtEpsServiceHoldOffTimer OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..10000)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Value of the Hold Off timer in milliseconds.
|
||
|
|
Valid values are in increments of 100ms."
|
||
|
|
REFERENCE
|
||
|
|
"G.8031 clause 11.12"
|
||
|
|
::= { prvtEpsServiceEntry 10 }
|
||
|
|
|
||
|
|
prvtEpsServiceWaitToRestoreTimer OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0 | 5..12)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Value of the Wait To Restore timer in seconds (0 to disable it)."
|
||
|
|
REFERENCE
|
||
|
|
"G.8031 clause 11.13"
|
||
|
|
::= { prvtEpsServiceEntry 11 }
|
||
|
|
|
||
|
|
prvtEpsServiceAdminFreeze OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Used to freeze the state of the protection service."
|
||
|
|
::= { prvtEpsServiceEntry 12 }
|
||
|
|
|
||
|
|
prvtEpsServiceAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { up(1), down(2) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Administrative status of the protection service."
|
||
|
|
::= { prvtEpsServiceEntry 13 }
|
||
|
|
|
||
|
|
prvtEpsServiceActivePath OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { working(0), protection(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Protected service active path."
|
||
|
|
::= { prvtEpsServiceEntry 14 }
|
||
|
|
|
||
|
|
prvtEpsServiceDefectsPresent OBJECT-TYPE
|
||
|
|
SYNTAX BITS { fullyIncompatibleProvisioning(0),
|
||
|
|
protectionSwitchingIncomplete(1),
|
||
|
|
protectionConfigurationMismatch(2),
|
||
|
|
epsConfigurationMismatch(3) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defects registered by the APS protocol could be either none or a composition of bits 0-3:
|
||
|
|
|
||
|
|
fullyIncompatibleProvisioning(0) - occurs upon reception of three APS frames with the
|
||
|
|
incompatible 'B' bit value within the 22.5 second period;
|
||
|
|
|
||
|
|
protectionSwitchingIncomplete(1) - occurs if the transmitted 'Requested Signal' and the
|
||
|
|
received 'Bridged Signal' do not match for a period of 50ms or longer;
|
||
|
|
|
||
|
|
protectionConfigurationMismatch(2) - working/protection configuration mismatch, occurs at
|
||
|
|
the reception of three APS frames from the working transport entity within the 22.5 second period;
|
||
|
|
|
||
|
|
epsConfigurationMismatch(3) - provisioning mismatch - for example, the local device is
|
||
|
|
set to revertive mode and the remote device is set to non-revertive mode."
|
||
|
|
::= { prvtEpsServiceEntry 15 }
|
||
|
|
|
||
|
|
prvtEpsServiceLocalState OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsProtectionStateType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Protection state of the local side."
|
||
|
|
::= { prvtEpsServiceEntry 19 }
|
||
|
|
|
||
|
|
prvtEpsServiceOperationalStatus OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies whether this service is ready for running.
|
||
|
|
The operational status can be up(true) or down(false).
|
||
|
|
When creating the service the operational
|
||
|
|
status will be down. Receiving CCMs from both transport
|
||
|
|
entities and establishment of APS on the protection transport
|
||
|
|
entity will bring the operational status to up."
|
||
|
|
::= { prvtEpsServiceEntry 20 }
|
||
|
|
|
||
|
|
prvtEpsServiceLastEvent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { unknown(0), switchoverAlarm(1),
|
||
|
|
lostCommunication(2), restoredCommunication(3),
|
||
|
|
signalFailDetected(4), signalDegradeDetected(5),
|
||
|
|
protctSignalFailDetected(6), signalFailRecovery(7),
|
||
|
|
signalDegradeRecovery(8),
|
||
|
|
protctSignalFailRecovery(9) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The most recent event about which the application has sent a notification."
|
||
|
|
::= { prvtEpsServiceEntry 21 }
|
||
|
|
|
||
|
|
prvtEpsServicePrimaryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { psFailed(0), psOk(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Primary path state."
|
||
|
|
::= { prvtEpsServiceEntry 22 }
|
||
|
|
|
||
|
|
prvtEpsServiceSecondaryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { psFailed(0), psOk(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Secondary path state."
|
||
|
|
::= { prvtEpsServiceEntry 23 }
|
||
|
|
|
||
|
|
prvtEpsServiceRemoteState OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsProtectionStateType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Protection state of the remote side."
|
||
|
|
::= { prvtEpsServiceEntry 24 }
|
||
|
|
|
||
|
|
prvtEpsServiceRemoteApsChannel OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Active APS communication reported by the remote."
|
||
|
|
::= { prvtEpsServiceEntry 25 }
|
||
|
|
|
||
|
|
prvtEpsServiceRemoteProtection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { pt1Plus1(0), pt1To1(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of protection (1+1 or 1:1) reported by the remote device."
|
||
|
|
::= { prvtEpsServiceEntry 26 }
|
||
|
|
|
||
|
|
prvtEpsServiceRemoteDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { dtUnidirectional(0), dtBidirectional(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of protection (unidirectional or bidirectional) reported by the remote."
|
||
|
|
::= { prvtEpsServiceEntry 27 }
|
||
|
|
|
||
|
|
prvtEpsServiceRemoteRevertive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Protection type (revertive or non-revertive) reported by the remote."
|
||
|
|
::= { prvtEpsServiceEntry 28 }
|
||
|
|
|
||
|
|
prvtEpsServiceLocalApsChannel OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { no(0), yes(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Active APS communication reported by the remote."
|
||
|
|
::= { prvtEpsServiceEntry 29 }
|
||
|
|
|
||
|
|
prvtEpsServiceLocalProtection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { pt1Plus1(0), pt1To1(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of protection (1+1 or 1:1) reported by the remote device."
|
||
|
|
::= { prvtEpsServiceEntry 30 }
|
||
|
|
|
||
|
|
prvtEpsServiceLocalDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { dtUnidirectional(0), dtBidirectional(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of protection (unidirectional or bidirectional) reported by the remote."
|
||
|
|
::= { prvtEpsServiceEntry 31 }
|
||
|
|
|
||
|
|
prvtEpsServiceClear OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsActionType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sends the Clear command to this EPS service."
|
||
|
|
::= { prvtEpsServiceEntry 32 }
|
||
|
|
|
||
|
|
prvtEpsServiceManualSwitch OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsActionType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sends the Manual Switch command to this EPS service."
|
||
|
|
::= { prvtEpsServiceEntry 33 }
|
||
|
|
|
||
|
|
prvtEpsServiceForcedSwitch OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsActionType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sends the Forced Switch command to this EPS service."
|
||
|
|
::= { prvtEpsServiceEntry 34 }
|
||
|
|
|
||
|
|
prvtEpsServiceLockout OBJECT-TYPE
|
||
|
|
SYNTAX PrvtEpsActionType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Sends the LockOut command to this EPS service."
|
||
|
|
::= { prvtEpsServiceEntry 35 }
|
||
|
|
|
||
|
|
prvtEpsServiceProtectionCounter OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Counts how many times the service has gone to Protection."
|
||
|
|
::= { prvtEpsServiceEntry 36 }
|
||
|
|
|
||
|
|
prvtEpsDefectAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsServiceOperationalStatus,
|
||
|
|
prvtEpsServiceDefectsPresent }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"1. EPS service is either operational or not operational;
|
||
|
|
2. Failure of protocol defects."
|
||
|
|
::= { prvtEpsMIBNotifications 1 }
|
||
|
|
|
||
|
|
prvtEpsSwitchoverAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsServiceActivePath }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued if the active link is changed,
|
||
|
|
pointing to the path where the switchover occured."
|
||
|
|
::= { prvtEpsMIBNotifications 2 }
|
||
|
|
|
||
|
|
prvtEpsLostCommunication NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of non reception of APS frames
|
||
|
|
in three consecutive intervals each representing 5 seconds."
|
||
|
|
::= { prvtEpsMIBNotifications 3 }
|
||
|
|
|
||
|
|
prvtEpsRestoredCommunication NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"APS frames are received normally after APS communication failure."
|
||
|
|
::= { prvtEpsMIBNotifications 4 }
|
||
|
|
|
||
|
|
prvtEpsSignalFailDetected NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of CCMs are not received
|
||
|
|
and (3.5 * CCMtime(CCMinterval)) has expired."
|
||
|
|
::= { prvtEpsMIBNotifications 5 }
|
||
|
|
|
||
|
|
prvtEpsSignalDegradeDetected NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of monitored error threshold is crossed:
|
||
|
|
1W Jitter error,
|
||
|
|
2W Jitter error,
|
||
|
|
Latency error,
|
||
|
|
Frame loss error."
|
||
|
|
::= { prvtEpsMIBNotifications 6 }
|
||
|
|
|
||
|
|
prvtEpsProtctSignalFailDetected NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of CCMs are not received on the protected link
|
||
|
|
and (3.5 * CCMtime(CCMinterval)) has expired or the protected link is down."
|
||
|
|
::= { prvtEpsMIBNotifications 7 }
|
||
|
|
|
||
|
|
prvtEpsSignalFailRecovery NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of CCMs start to be received
|
||
|
|
correctly again after a prvtEpsSignalFailDetected alarm occured
|
||
|
|
and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up ."
|
||
|
|
::= { prvtEpsMIBNotifications 8 }
|
||
|
|
|
||
|
|
prvtEpsSignalDegradeRecovery NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of monitored error threshold is crossed bellow limis:
|
||
|
|
1W Jitter error,
|
||
|
|
2W Jitter error,
|
||
|
|
Latency error,
|
||
|
|
Frame loss error."
|
||
|
|
::= { prvtEpsMIBNotifications 9 }
|
||
|
|
|
||
|
|
prvtEpsProtctSignalFailRecovery NOTIFICATION-TYPE
|
||
|
|
OBJECTS { prvtEpsSvcId }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm is issued in case of CCMs start to be received correctly again
|
||
|
|
on the protected link after a prvtEpsProtctSignalFailDetected alarm occured
|
||
|
|
and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up ."
|
||
|
|
::= { prvtEpsMIBNotifications 10 }
|
||
|
|
|
||
|
|
END -- end of module PRVT-EPS-MIB.
|