mibs/MIBS/transition/TN-SA-MIB

TN-SA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, IpAddress, Counter32, Unsigned32, Counter64
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue, MacAddress
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    entPhysicalIndex FROM ENTITY-MIB
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB;

tnSaMIB MODULE-IDENTITY
    LAST-UPDATED "201310180000Z" -- October 18, 2013
    ORGANIZATION "Transition Networks"
    CONTACT-INFO
        "Copyright (C) 2013  Transition Networks, Inc. All Rights Reserved."
    DESCRIPTION
        "A MIB module provides Service Activation management interface."
    ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) transition (868) products (2) tnProducts(5) tnEtherSATMIB(108) 2 }

--
-- Textual conventions
--

TnSAEnabledState ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Enabled state."
    SYNTAX INTEGER {
        disabled (0),       -- Disabled state
        enabled (1)         -- Enabled state
    }

TnSATestDirection ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Test Direction."
    SYNTAX INTEGER {
        ne-to-fe (0),         -- Near End to Far End
        fe-to-ne (1),         -- Far End to Near End
        loopback (2)          -- Loopback
    }

TnSADirectionality ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Directionality of the test."
    SYNTAX INTEGER {
        unidirection (0),         -- uni-direction
        bidirection  (1),         -- bi-direction
        loopback     (2)
    }

TnSAFrameLevel ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Frame level."
    SYNTAX INTEGER {
        levelL2 (1),
        levelL3 (2)
    }

TnSAPaylodFiller ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Payload filler."
    SYNTAX INTEGER {
        prbs (0),
        fixed (2)
    }

TnSAL2Encaps ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Encapsulation type for L2 frames."
    SYNTAX INTEGER {
        none (0),
        eth-tst (1),          -- ETH-TST frames
        eth-tst-ethtype (2),  -- ETH-TST frames with custom Eth-Type
        llc-snap (3)          -- LLC/SNAP frames
    }

TnSAL3Encaps ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Encapsulation type for L3 frames."
    SYNTAX INTEGER {
        none (0),
        udp (1),          -- UDP/IP
        tcp (2)           -- TCP/IP
    }

TnSATestStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Overall test status."
    SYNTAX INTEGER {
        status-none (1),
        completed (2),
        in-progress (3),
        not-supported (4),
        unable-to-run (5),
        aborted (6),
        failed (7),
        unknown (8)
    }

TnSATestAction ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Test action."
    SYNTAX INTEGER {
        start (1),          -- Start test
        stop (2)            -- Stop test
    }

TnSATestResStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Test result. fail NE <20> if near end to far end direction has failed. 
         fail FE <20> if far end to near end direction has failed (For bidirectional mode only).
         fail NE & FE <20> if both directions have failed (For bidirectional mode only)."
    SYNTAX INTEGER {
        fail-ne (1),  -- Fail Near End 
        fail-fe (2),  -- Fail Far End
        fail-ne-fe (3),
        pass (4),
        not-tested (5),
        fail-exec (6)
    }

TnSATestStepResult ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Test step result."
    SYNTAX INTEGER {
        fail (0),
        pass (1)
    }

TnSATestEncapsulationType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "VLAN Tag encapsulation type."
    SYNTAX INTEGER {
        utag (0),
        ctag (1),
        stag (2),
        cctag (3),
        sctag (4)
    }

tnSAProfileNextID OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object contains the next profile ID to use
        when creating entries in the tnSAProfileTable.

        When creating a new conceptual row (configuration
        entry) in tnSAProfileTable with an SNMP SET operation the
        command generator (Network Management Application) must
        first issue a management protocol retrieval operation
        to obtain the current value of this object.

        If the command responder (agent) does not wish to allow
        creation of more entries in tnSAProfileTable, possibly
        because of resource exhaustion, this object MUST return
        a value of 0.

        If a non-zero value is returned the Network Management
        Application must determine whether the value is indeed
        still unused since two Network Management Applications
        may attempt to create a row simultaneously and use the
        same value.

        If it is currently unused and the SET succeeds, the
        agent MUST change the value of this object to a
        currently unused non-zero value (according to an
        implementation specific algorithm) or zero (if no
        further row creation will be permitted).

        If the value is in use, however, the SET fails and the
        Network Management Application must then reread this
        object to obtain a new usable value."
    ::= { tnSaMIB 1 }

tnSATestNextID OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object contains the next Test ID to use
        when creating entries in the tnSATestTable.

        When creating a new conceptual row (configuration
        entry) in tnSATestTable with an SNMP SET operation the
        command generator (Network Management Application) must
        first issue a management protocol retrieval operation
        to obtain the current value of this object.

        If the command responder (agent) does not wish to allow
        creation of more entries in tnSATestTable, possibly
        because of resource exhaustion, this object MUST return
        a value of 0.

        If a non-zero value is returned the Network Management
        Application must determine whether the value is indeed
        still unused since two Network Management Applications
        may attempt to create a row simultaneously and use the
        same value.

        If it is currently unused and the SET succeeds, the
        agent MUST change the value of this object to a
        currently unused non-zero value (according to an
        implementation specific algorithm) or zero (if no
        further row creation will be permitted).

        If the value is in use, however, the SET fails and the
        Network Management Application must then reread this
        object to obtain a new usable value."
    ::= { tnSaMIB 2 }

tnSASysConfPeerCommunicationProto OBJECT-TYPE
    SYNTAX TnSAEnabledState
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable/disable the peer communication protocol. If this attribute is disabled a NID is unable to support 
        unidirectional and bidirectional RFC2544 tests (both as Initiator and Collector) since it cannot communicate
        with the far end. Only loopback tests can be executed in this case."
    ::= { tnSaMIB 3 }

tnSASysConfCollectorState OBJECT-TYPE
    SYNTAX TnSAEnabledState
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Collector state. The Collector Flag determines will the SA module accept SA test requests from outside."
    ::= { tnSaMIB 4 }

tnSASysTestMacAddress OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Test MAC address. The Test MAC Address is used as source MAC address of the generating frames."
    ::= { tnSaMIB 5 }

tnSAPtpClockNum OBJECT-TYPE
    SYNTAX INTEGER(0..3)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        ""
    ::= { tnSaMIB 6 }

--
--    SA Profile
--
tnSAProfileTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSAProfileEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Service Activation Profile Table.  Entries in this table
        represent SA profiles.

        The index structure is the profile ID."
    ::= { tnSaMIB 7 }

tnSAProfileEntry OBJECT-TYPE
    SYNTAX TnSAProfileEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSAProfileTable."
    INDEX {
        tnSAProfileID
    }
    ::= { tnSAProfileTable 1 }

TnSAProfileEntry ::= SEQUENCE {
    tnSAProfileID Unsigned32,
    tnSAProfileName DisplayString,
    tnSAProfileFrameLossRatio Unsigned32,
    tnSAProfileCbsLineRate Unsigned32,
    tnSAProfileYellowPcpList Unsigned32,
    tnSAProfileFrameSizeMix OCTET STRING,
    tnSAProfileRateDecStep Unsigned32,
    tnSAProfileRateStepLength Unsigned32,
    tnSAProfileDirectionality TnSADirectionality,
    tnSAProfileStepsToExecute Unsigned32,
    tnSAProfileRefCounter Unsigned32,
    tnSAProfileRowStatus RowStatus
}

tnSAProfileID OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The profile entry ID."
    ::= { tnSAProfileEntry 1 }

tnSAProfileName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The name of the profile."
    ::= { tnSAProfileEntry 2 }

tnSAProfileFrameLossRatio OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Acceptable frame loss ratio (expressed in percentage, 
         with 2 decimals (i.e. 99.99 %)."
    ::= { tnSAProfileEntry 3 }

tnSAProfileCbsLineRate OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Line rate at which burst traffic should be sent for the Back-to-back frames test. In Mbps."
    ::= { tnSAProfileEntry 4 }

tnSAProfileFrameSizeMix OBJECT-TYPE
    SYNTAX OCTET STRING  (SIZE(1..20))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Traffic frame size mix, for throughput tests."
    ::= { tnSAProfileEntry 5 }

tnSAProfileRateDecStep OBJECT-TYPE
    SYNTAX Unsigned32 (0..100)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
      "Rate decrease step size, in percentage. Default 25%."
    DEFVAL { 25 }
    ::= { tnSAProfileEntry 6 }

tnSAProfileRateStepLength OBJECT-TYPE
    SYNTAX Unsigned32 (10..60)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
      "Rate step length, in seconds."
    DEFVAL { 20 }
    ::= { tnSAProfileEntry 7 }

tnSAProfileDirectionality OBJECT-TYPE
    SYNTAX TnSADirectionality
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
      "Directionality of the tests: uni-directional, bi-directional or loopback based."
    ::= { tnSAProfileEntry 8 }

tnSAProfileYellowPcpList OBJECT-TYPE
    SYNTAX Unsigned32 (0.. 255)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "List of PCP values corresponding to yellow frame. Bitmask. Each bit number [0..7] corresponds to a PCP value [0..7].
         Bit 0 corresponds to PCP 0, etc.

         Example: yellow PCP list: 0,3,5. So, bits 0, 3 and 5 must be set to 1, while
         other bits must be reset to zero: 101001 in binary format = 41 in decimal format.
         So, the tnSAProfileYellowPcpList must be set to 41."
    ::= { tnSAProfileEntry 9 }

tnSAProfileStepsToExecute OBJECT-TYPE
    SYNTAX Unsigned32 (0.. 2047)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "List of tests to execute <20> bitmask:
             -Throughput (bit 1)
             -Latency (bit 2)
             -Frame Loss Rate (bit 3)
             -Back To Back Frames (bit 4)"
    ::= { tnSAProfileEntry 10 }

tnSAProfileRefCounter OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Readonly field contains number of tests that use this profile. Profile can be deleted if it has no assigned tests."
    ::= { tnSAProfileEntry 11 }

tnSAProfileRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The row status.  To create a row, set the instance of
        this variable for the new row to 'createAndGo'.  To
        delete a row, set the instance of this variable for
        the row to delete to 'destroy'."
    ::= { tnSAProfileEntry 12 }

--
--    Frame format table for SA profile
--
tnSAFrameFormatProfileTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSAFrameFormatProfileEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The SA Profile Frame Format Table.  Entries in this table represent 
        Frame Format attributes.  Each row in the table conceptually
        augments the entries in the tnSAProfileTable.

        The index structure is the SA profile ID."
    ::= { tnSaMIB 8 }

tnSAFrameFormatProfileEntry OBJECT-TYPE
    SYNTAX TnSAFrameFormatProfileEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSAFrameFormatProfileTable."
    INDEX {
        tnSAProfileID
    }
    ::= { tnSAFrameFormatProfileTable 1 }

TnSAFrameFormatProfileEntry ::= SEQUENCE {
    tnSAFrameFormatProfileFrameLevel TnSAFrameLevel,
    tnSAFrameFormatProfilePaylodFiller TnSAPaylodFiller,
    tnSAFrameFormatProfileEncapsulationL2 TnSAL2Encaps,
    tnSAFrameFormatProfileEncapsulationL3 TnSAL3Encaps,
    tnSAFrameFormatProfileEthType Unsigned32,
    tnSAFrameFormatProfileIpDscp Unsigned32,
    tnSAFrameFormatProfileIpEcn Unsigned32,
    tnSAFrameFormatProfileIpFlags Unsigned32,
    tnSAFrameFormatProfileIpTtl Unsigned32,
    tnSAFrameFormatProfileUdpSrcPort Unsigned32,
    tnSAFrameFormatProfileUdpDstPort Unsigned32,
    tnSAFrameFormatProfileTcpSrcPort Unsigned32,
    tnSAFrameFormatProfileTcpDstPort Unsigned32,
    tnSAFrameFormatProfileTcpSeqNum Unsigned32,
    tnSAFrameFormatProfileTcpAckNum Unsigned32,
    tnSAFrameFormatProfileTcpControlBits Unsigned32,
    tnSAFrameFormatProfileTcpWindowSize Unsigned32,
    tnSAFrameFormatProfileLlcSnapOui Unsigned32,
    tnSAFrameFormatProfileLlcSnapProto Unsigned32,
    tnSAFrameFormatProfileIpDestIpAddress IpAddress,
    tnSAFrameFormatProfileIpSrcIpAddress IpAddress,
    tnSAFrameFormatProfilePayloadFillPattern Unsigned32,
    tnSAFrameFormatProfileMEGLevel Unsigned32
}

tnSAFrameFormatProfileFrameLevel OBJECT-TYPE
    SYNTAX TnSAFrameLevel
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Frame level <20> L2 or L3."
    ::= { tnSAFrameFormatProfileEntry 1 }

tnSAFrameFormatProfilePaylodFiller OBJECT-TYPE
    SYNTAX TnSAPaylodFiller
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Paylod filler."
    ::= { tnSAFrameFormatProfileEntry 2 }

tnSAFrameFormatProfileEncapsulationL2 OBJECT-TYPE
    SYNTAX TnSAL2Encaps
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Encapsulation type for L2 frames."
    ::= { tnSAFrameFormatProfileEntry 3 }

tnSAFrameFormatProfileEncapsulationL3 OBJECT-TYPE
    SYNTAX TnSAL3Encaps
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Encapsulation type for L3 frames."
    ::= { tnSAFrameFormatProfileEntry 4 }

tnSAFrameFormatProfileEthType OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Custom Eth-Type for L2 ETH-TST frames."
    ::= { tnSAFrameFormatProfileEntry 5 }

tnSAFrameFormatProfileIpDscp OBJECT-TYPE
    SYNTAX Unsigned32 (0..63)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "DSCP value for L3 IP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 6 }

tnSAFrameFormatProfileIpEcn OBJECT-TYPE
    SYNTAX Unsigned32 (0..3)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "ECN value for L3 IP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 7 }

tnSAFrameFormatProfileIpFlags OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Flags value for L3 IP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 8 }

tnSAFrameFormatProfileIpTtl OBJECT-TYPE
    SYNTAX Unsigned32 (0..255)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "TTL value for L3 IP frames."
    DEFVAL { 64 }
    ::= { tnSAFrameFormatProfileEntry 9 }

tnSAFrameFormatProfileUdpSrcPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Source port for L3 IP/UDP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 10 }

tnSAFrameFormatProfileUdpDstPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Destination port for L3 IP/UDP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 11 }

tnSAFrameFormatProfileTcpSrcPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Source port for L3 IP/TCP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 12 }

tnSAFrameFormatProfileTcpDstPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Destination port for L3 IP/TCP frames."
    DEFVAL { 0 }
    ::= { tnSAFrameFormatProfileEntry 13 }

tnSAFrameFormatProfileTcpSeqNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Sequence number for L3 IP/TCP frames."
    DEFVAL { 16 }
    ::= { tnSAFrameFormatProfileEntry 14 }

tnSAFrameFormatProfileTcpAckNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "ACK number for L3 IP/TCP frames."
    DEFVAL { 16 }
    ::= { tnSAFrameFormatProfileEntry 15 }

tnSAFrameFormatProfileTcpControlBits OBJECT-TYPE
    SYNTAX Unsigned32 (0..63)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Control bits for L3 IP/TCP frames."
    DEFVAL { 16 }
    ::= { tnSAFrameFormatProfileEntry 16 }

tnSAFrameFormatProfileTcpWindowSize OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Window size for L3 IP/TCP frames."
    DEFVAL { 16 }
    ::= { tnSAFrameFormatProfileEntry 17 }

tnSAFrameFormatProfileLlcSnapOui   OBJECT-TYPE
    SYNTAX Unsigned32 (0.. 16777215)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        " LLC/SNAP OUI field <20> 3 bytes"
    ::= { tnSAFrameFormatProfileEntry 18 }

tnSAFrameFormatProfileLlcSnapProto   OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        " LLC/SNAP protocol field"
    ::= { tnSAFrameFormatProfileEntry 19 }

tnSAFrameFormatProfileIpDestIpAddress   OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        " Destination IP address"
    ::= { tnSAFrameFormatProfileEntry 20 }

tnSAFrameFormatProfileIpSrcIpAddress   OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        " Source IP address"
    ::= { tnSAFrameFormatProfileEntry 21 }

tnSAFrameFormatProfilePayloadFillPattern   OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        " Payload filler pattern(value entered in decimal)."
    ::= { tnSAFrameFormatProfileEntry 22 }

tnSAFrameFormatProfileMEGLevel    OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        " Level of MEG that is used by ETH-TST frames."
    ::= { tnSAFrameFormatProfileEntry 23 }

--
--    DM bins threshold configuration table
--
tnDmBinThresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnDmBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of DM bin thresholds."
    ::= { tnSaMIB 9 }

tnDmBinThresholdEntry  OBJECT-TYPE
    SYNTAX TnDmBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the SA tnDmBinThresholdTable."
    INDEX {
        tnSAProfileID,
        tnDmBinThresholdIndex
    } ::= { tnDmBinThresholdTable 1 }

TnDmBinThresholdEntry ::= SEQUENCE {
    tnDmBinThresholdIndex Unsigned32,
    tnDmBinThresholdValue Unsigned32
}

tnDmBinThresholdIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "DM bin threshold index."
    ::= { tnDmBinThresholdEntry 1 }

tnDmBinThresholdValue OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "DM bin threshold value in usec. Zero value is used to delete threshold."
    ::= { tnDmBinThresholdEntry 2 }

--
--    DMV bins threshold configuration table
--
tnDmvBinThresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnDmvBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of DMV bin thresholds."
    ::= { tnSaMIB 10 }

tnDmvBinThresholdEntry  OBJECT-TYPE
    SYNTAX TnDmvBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the SA tnDmvBinThresholdTable."
    INDEX {
        tnSAProfileID,
        tnDmvBinThresholdIndex
    } ::= { tnDmvBinThresholdTable 1 }

TnDmvBinThresholdEntry ::= SEQUENCE {
    tnDmvBinThresholdIndex Unsigned32,
    tnDmvBinThresholdValue Unsigned32
}

tnDmvBinThresholdIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "DM bin threshold index."
    ::= { tnDmvBinThresholdEntry 1 }

tnDmvBinThresholdValue OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "DM bin threshold value in usec. Zero value is used to delete threshold."
    ::= { tnDmvBinThresholdEntry 2 }

--
--    SA Test table
--
tnSATestTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSATestEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The SA Test Table.  Entries in this table
        represent Service Activation test attributes.

        The index structure is the test ID."
    ::= { tnSaMIB 11 }

tnSATestEntry OBJECT-TYPE
    SYNTAX TnSATestEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSATestTable."
    INDEX {
        tnSATestID
    }
    ::= { tnSATestTable 1 }

TnSATestEntry ::= SEQUENCE {
    tnSATestID Unsigned32,
    tnSATestSAProfileId Unsigned32,
    tnSATestIngressEncapsulationType TnSATestEncapsulationType,
    tnSATestIngressInnerVid Unsigned32,
    tnSATestIngressInnerPcp Unsigned32,
    tnSATestIngressOuterVid Unsigned32,
    tnSATestIngressOuterPcp Unsigned32,
    tnSATestEgressEncapsulationType TnSATestEncapsulationType,
    tnSATestEgressInnerVid Unsigned32,
    tnSATestEgressInnerPcp Unsigned32,
    tnSATestEgressOuterVid Unsigned32,
    tnSATestEgressOuterPcp Unsigned32,
    tnSATestIngressPort Unsigned32,
    tnSATestCollectorIngressPort Unsigned32,
    tnSATestCollectorIpAddr IpAddress,
    tnSATestName DisplayString,
    tnSATestCir Counter64,
    tnSATestCbs Unsigned32,
    tnSATestEir Counter64,
    tnSATestEbs Unsigned32,
    tnSATestTargettestMacAddr MacAddress,
    tnSATestAction TnSATestAction,
    tnSATestRowStatus RowStatus
}

tnSATestID OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The test entry ID."
    ::= { tnSATestEntry 1 }

tnSATestSAProfileId OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The SA profile ID for the test."
    ::= { tnSATestEntry 2 }

tnSATestIngressEncapsulationType OBJECT-TYPE
    SYNTAX TnSATestEncapsulationType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "VLAN tag encapsulation type."
    ::= { tnSATestEntry 3 }

tnSATestIngressInnerVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Ingress Inner VLAN ID."
    ::= { tnSATestEntry 4 }

tnSATestIngressInnerPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Ingress Inner PCP value."
    ::= { tnSATestEntry 5 }

tnSATestIngressOuterVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Ingress Outer VLAN ID."
    ::= { tnSATestEntry 6 }

tnSATestIngressOuterPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Ingress Outer PCP value."
    ::= { tnSATestEntry 7 }

tnSATestEgressEncapsulationType OBJECT-TYPE
    SYNTAX TnSATestEncapsulationType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "VLAN tag encapsulation type."
    ::= { tnSATestEntry 8 }

tnSATestEgressInnerVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Egress Inner VLAN ID."
    ::= { tnSATestEntry 9 }

tnSATestEgressInnerPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Egress Inner PCP value."
    ::= { tnSATestEntry 10 }

tnSATestEgressOuterVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Egress Outer VLAN ID."
    ::= { tnSATestEntry 11 }

tnSATestEgressOuterPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Egress Outer PCP value."
    ::= { tnSATestEntry 12 }

tnSATestIngressPort OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Ingress port number."
    ::= { tnSATestEntry 13 }

tnSATestCollectorIngressPort OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Collector's ingress port number."
    ::= { tnSATestEntry 14 }

tnSATestCollectorIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "IP address of the collector."
    ::= { tnSATestEntry 15 }

tnSATestName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Test name."
    ::= { tnSATestEntry 16 }

tnSATestCir OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "CIR. In Kbps."
    ::= { tnSATestEntry 17 }

tnSATestCbs OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "CBS. In bytes."
    ::= { tnSATestEntry 18 }

tnSATestEir OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "EIR. In Kbps."
    ::= { tnSATestEntry 19 }

tnSATestEbs OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "EBS. In bytes."
    ::= { tnSATestEntry 20 }

tnSATestTargettestMacAddr OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Target Test MAC address (to be used for Loopback test only)."
    ::= { tnSATestEntry 21 }

tnSATestAction OBJECT-TYPE
    SYNTAX TnSATestAction
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This attribute allow start/stop test."
    ::= { tnSATestEntry 22 }

tnSATestRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The row status.  To create a row, set the instance of
        this variable for the new row to 'createAndGo'.  To
        delete a row, set the instance of this variable for
        the row to delete to 'destroy'."
    ::= { tnSATestEntry  23 }

--
-- Common Test Results
--
tnSACommonTestResultsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSACommonTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Common test results."
    ::= { tnSaMIB 12 }

tnSACommonTestResultsEntry OBJECT-TYPE
    SYNTAX TnSACommonTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSACommonTestResultsTable."
    INDEX {
        tnSACommonTestResultsTestId
    }
    ::= { tnSACommonTestResultsTable 1 }

TnSACommonTestResultsEntry ::= SEQUENCE {
    tnSACommonTestResultsTestId Unsigned32,
    tnSACommonTestResultsTestStatus TnSATestStatus,
    tnSACommonTestResultsEgressPort Unsigned32,
    tnSACommonTestResultsCbsLineRate Unsigned32,
    tnSACommonTestResultsDirectionality TnSADirectionality,
    tnSACommonTestResultsFrameLossRatio Unsigned32,
    tnSACommonTestResultsYellowPcpList Unsigned32,
    tnSACommonTestResultsFrameSizeMix OCTET STRING,
    tnSACommonTestResultsRateDecStep Unsigned32,
    tnSACommonTestResultsRateStepLength Unsigned32,
    tnSACommonTestResultsFrameFormatFrameLevel TnSAFrameLevel,
    tnSACommonTestResultsStepsToExecute Unsigned32,
    tnSACommonTestResultsFrameFormatPaylodFiller TnSAPaylodFiller,
    tnSACommonTestResultsFrameFormatEncapsulationL2 TnSAL2Encaps,
    tnSACommonTestResultsFrameFormatEncapsulationL3 TnSAL3Encaps,
    tnSACommonTestResultsFrameFormatEthType Unsigned32,
    tnSACommonTestResultsFrameFormatIpDscp Unsigned32,
    tnSACommonTestResultsFrameFormatIpEcn Unsigned32,
    tnSACommonTestResultsFrameFormatIpFlags Unsigned32,
    tnSACommonTestResultsFrameFormatIpTtl Unsigned32,
    tnSACommonTestResultsFrameFormatUdpSrcPort Unsigned32,
    tnSACommonTestResultsFrameFormatUdpDstPort Unsigned32,
    tnSACommonTestResultsFrameFormatTcpSrcPort Unsigned32,
    tnSACommonTestResultsFrameFormatTcpDstPort Unsigned32,
    tnSACommonTestResultsFrameFormatTcpSeqNum Unsigned32,
    tnSACommonTestResultsFrameFormatTcpAckNum Unsigned32,
    tnSACommonTestResultsFrameFormatTcpControlBits Unsigned32,
    tnSACommonTestResultsFrameFormatTcpWindowSize Unsigned32,
    tnSACommonTestResultsFrameFormatLlcSnapOui Unsigned32,
    tnSACommonTestResultsFrameFormatLlcSnapProto Unsigned32,
    tnSACommonTestResultsFrameFormatIpDestIpAddress IpAddress,
    tnSACommonTestResultsThroughputTestElapsedTime Unsigned32,
    tnSACommonTestResultsLatencyTestElapsedTime Unsigned32,
    tnSACommonTestResultsFlrTestElapsedTime Unsigned32,
    tnSACommonTestResultsBacktoBackTestElapsedTime Unsigned32,
    tnSACommonTestResultsThroughputTestResult TnSATestResStatus,
    tnSACommonTestResultsLatencyTestResult TnSATestResStatus,
    tnSACommonTestResultsFlrTestResult TnSATestResStatus,
    tnSACommonTestResultsBacktoBackTestResult TnSATestResStatus,
    tnSACommonTestResultsLastError DisplayString,
    tnSACommonTestResultsTestIngressEncapsulationType TnSATestEncapsulationType,
    tnSACommonTestResultsTestIngressInnerVid Unsigned32,
    tnSACommonTestResultsTestIngressInnerPcp Unsigned32,
    tnSACommonTestResultsTestIngressOuterVid Unsigned32,
    tnSACommonTestResultsTestIngressOuterPcp Unsigned32,
    tnSACommonTestResultsTestEgressEncapsulationType TnSATestEncapsulationType,
    tnSACommonTestResultsTestEgressInnerVid Unsigned32,
    tnSACommonTestResultsTestEgressInnerPcp Unsigned32,
    tnSACommonTestResultsTestEgressOuterVid Unsigned32,
    tnSACommonTestResultsTestEgressOuterPcp Unsigned32,
    tnSACommonTestResultsTestIngressPort Unsigned32,
    tnSACommonTestResultsTestCollectorIngressPort Unsigned32,
    tnSACommonTestResultsTestCir Counter64,
    tnSACommonTestResultsTestCbs Unsigned32,
    tnSACommonTestResultsTestEir Counter64,
    tnSACommonTestResultsTestEbs Unsigned32
}

tnSACommonTestResultsTestId OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The report Test ID."
    ::= { tnSACommonTestResultsEntry 1 }

tnSACommonTestResultsTestStatus    OBJECT-TYPE
    SYNTAX TnSATestStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Test status."
    ::= { tnSACommonTestResultsEntry 2 }

tnSACommonTestResultsEgressPort OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Egress port number."
    ::= { tnSACommonTestResultsEntry 3 }

tnSACommonTestResultsCbsLineRate OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Line rate at which burst traffic should be sent for the Back-to-back frames test. In Mbps."
    ::= { tnSACommonTestResultsEntry 4 }

tnSACommonTestResultsDirectionality OBJECT-TYPE
    SYNTAX TnSADirectionality
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Directionality of the tests: uni-directional, bi-directional or loopback based."
    ::= { tnSACommonTestResultsEntry 5 }

tnSACommonTestResultsFrameLossRatio OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Acceptable frame loss ratio (expressed in percentage, 
         with 2 decimals (i.e. 99.99 %)."
    ::= { tnSACommonTestResultsEntry 6 }

tnSACommonTestResultsYellowPcpList OBJECT-TYPE
    SYNTAX Unsigned32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "List of PCP values corresponding to yellow frame. Bitmask."
    ::= { tnSACommonTestResultsEntry 7 }

tnSACommonTestResultsFrameSizeMix OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(1..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Traffic frame size mix, for throughput tests."
    ::= { tnSACommonTestResultsEntry 8 }

tnSACommonTestResultsRateDecStep OBJECT-TYPE
    SYNTAX Unsigned32 (0..100)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      " Rate decrease step size, in percentage."
    ::= { tnSACommonTestResultsEntry 9 }

tnSACommonTestResultsRateStepLength OBJECT-TYPE
    SYNTAX Unsigned32 (10..60)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Rate step length, in seconds."
    ::= { tnSACommonTestResultsEntry 10 }

tnSACommonTestResultsFrameFormatFrameLevel OBJECT-TYPE
    SYNTAX TnSAFrameLevel
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Frame level <20> L2 or L3."
    ::= { tnSACommonTestResultsEntry 11 }

tnSACommonTestResultsStepsToExecute OBJECT-TYPE
    SYNTAX Unsigned32 (0.. 2047)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "List of tests to execute <20> bitmask:
             -Throughput (bit 1)
             -Latency (bit 2)
             -Frame Loss Rate (bit 3)
             -Back To Back Frames (bit 4)"
    ::= { tnSACommonTestResultsEntry 12 }

tnSACommonTestResultsFrameFormatPaylodFiller OBJECT-TYPE
    SYNTAX TnSAPaylodFiller
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Paylod filler."
    ::= { tnSACommonTestResultsEntry 13 }

tnSACommonTestResultsFrameFormatEncapsulationL2 OBJECT-TYPE
    SYNTAX TnSAL2Encaps
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Encapsulation type for L2 frames."
    ::= { tnSACommonTestResultsEntry 14 }

tnSACommonTestResultsFrameFormatEncapsulationL3 OBJECT-TYPE
    SYNTAX TnSAL3Encaps
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Encapsulation type for L3 frames."
    ::= { tnSACommonTestResultsEntry 15 }

tnSACommonTestResultsFrameFormatEthType OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Custom Eth-Type for L2 ETH-TST frames."
    ::= { tnSACommonTestResultsEntry 16 }

tnSACommonTestResultsFrameFormatIpDscp OBJECT-TYPE
    SYNTAX Unsigned32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DSCP value for L3 IP frames."
    ::= { tnSACommonTestResultsEntry 17 }

tnSACommonTestResultsFrameFormatIpEcn OBJECT-TYPE
    SYNTAX Unsigned32 (0..3)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "ECN value for L3 IP frames."
    ::= { tnSACommonTestResultsEntry 18 }

tnSACommonTestResultsFrameFormatIpFlags OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Flags value for L3 IP frames."
    ::= { tnSACommonTestResultsEntry 19 }

tnSACommonTestResultsFrameFormatIpTtl OBJECT-TYPE
    SYNTAX Unsigned32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "TTL value for L3 IP frames."
    ::= { tnSACommonTestResultsEntry 20 }

tnSACommonTestResultsFrameFormatUdpSrcPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Source port for L3 IP/UDP frames."
    ::= { tnSACommonTestResultsEntry 21 }

tnSACommonTestResultsFrameFormatUdpDstPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Destination port for L3 IP/UDP frames."
    ::= { tnSACommonTestResultsEntry 22 }

tnSACommonTestResultsFrameFormatTcpSrcPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Source port for L3 IP/TCP frames."
    ::= { tnSACommonTestResultsEntry 23 }

tnSACommonTestResultsFrameFormatTcpDstPort OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Destination port for L3 IP/TCP frames."
    ::= { tnSACommonTestResultsEntry 24 }

tnSACommonTestResultsFrameFormatTcpSeqNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Sequence number for L3 IP/TCP frames."
    ::= { tnSACommonTestResultsEntry 25 }

tnSACommonTestResultsFrameFormatTcpAckNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "ACK number for L3 IP/TCP frames."
    ::= { tnSACommonTestResultsEntry 26 }

tnSACommonTestResultsFrameFormatTcpControlBits OBJECT-TYPE
    SYNTAX Unsigned32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Control bits for L3 IP/TCP frames."
    ::= { tnSACommonTestResultsEntry 27 }

tnSACommonTestResultsFrameFormatTcpWindowSize OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Window size for L3 IP/TCP frames."
    ::= { tnSACommonTestResultsEntry 28 }

tnSACommonTestResultsFrameFormatLlcSnapOui   OBJECT-TYPE
    SYNTAX Unsigned32 (0.. 16777215)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        " LLC/SNAP OUI field <20> 3 bytes"
    ::= { tnSACommonTestResultsEntry 29 }

tnSACommonTestResultsFrameFormatLlcSnapProto   OBJECT-TYPE
    SYNTAX Unsigned32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        " LLC/SNAP protocol field"
    ::= { tnSACommonTestResultsEntry 30 }

tnSACommonTestResultsFrameFormatIpDestIpAddress   OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        " Destination IP address"
    ::= { tnSACommonTestResultsEntry 31 }

tnSACommonTestResultsThroughputTestElapsedTime OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total elapsed time for Throughput test in seconds."
    ::= { tnSACommonTestResultsEntry 32 }

tnSACommonTestResultsLatencyTestElapsedTime OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total elapsed time for Latency test in seconds."
    ::= { tnSACommonTestResultsEntry 33 }

tnSACommonTestResultsFlrTestElapsedTime OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total elapsed time for FLR test in seconds."
    ::= { tnSACommonTestResultsEntry 34 }

tnSACommonTestResultsBacktoBackTestElapsedTime OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total elapsed time for Back to Back test in seconds."
    ::= { tnSACommonTestResultsEntry 35 }

tnSACommonTestResultsThroughputTestResult OBJECT-TYPE
    SYNTAX TnSATestResStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Throughput test result."
    ::= { tnSACommonTestResultsEntry 36 }

tnSACommonTestResultsLatencyTestResult OBJECT-TYPE
    SYNTAX TnSATestResStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Latency test result."
    ::= { tnSACommonTestResultsEntry 37 }

tnSACommonTestResultsFlrTestResult OBJECT-TYPE
    SYNTAX TnSATestResStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "FLR test result."
    ::= { tnSACommonTestResultsEntry 38 }

tnSACommonTestResultsBacktoBackTestResult OBJECT-TYPE
    SYNTAX TnSATestResStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Back to back test result."
    ::= { tnSACommonTestResultsEntry 39 }

tnSACommonTestResultsLastError OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The last error string."
    ::= { tnSACommonTestResultsEntry 40 }

tnSACommonTestResultsTestIngressEncapsulationType OBJECT-TYPE
    SYNTAX TnSATestEncapsulationType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "VLAN tag encapsulation type."
    ::= { tnSACommonTestResultsEntry 41 }

tnSACommonTestResultsTestIngressInnerVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Ingress Inner VLAN ID."
    ::= { tnSACommonTestResultsEntry 42 }

tnSACommonTestResultsTestIngressInnerPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Ingress Inner PCP value."
    ::= { tnSACommonTestResultsEntry 43 }

tnSACommonTestResultsTestIngressOuterVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Ingress Outer VLAN ID."
    ::= { tnSACommonTestResultsEntry 44 }

tnSACommonTestResultsTestIngressOuterPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Ingress Outer PCP value."
    ::= { tnSACommonTestResultsEntry 45 }

tnSACommonTestResultsTestEgressEncapsulationType OBJECT-TYPE
    SYNTAX TnSATestEncapsulationType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "VLAN tag encapsulation type."
    ::= { tnSACommonTestResultsEntry 46 }

tnSACommonTestResultsTestEgressInnerVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Egress Inner VLAN ID."
    ::= { tnSACommonTestResultsEntry 47 }

tnSACommonTestResultsTestEgressInnerPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Egress Inner PCP value."
    ::= { tnSACommonTestResultsEntry 48 }

tnSACommonTestResultsTestEgressOuterVid OBJECT-TYPE
    SYNTAX Unsigned32 (0..4095)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Egress Outer VLAN ID."
    ::= { tnSACommonTestResultsEntry 49 }

tnSACommonTestResultsTestEgressOuterPcp OBJECT-TYPE
    SYNTAX Unsigned32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Egress Outer PCP value."
    ::= { tnSACommonTestResultsEntry 50 }

tnSACommonTestResultsTestIngressPort OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Ingress port number."
    ::= { tnSACommonTestResultsEntry 51 }

tnSACommonTestResultsTestCollectorIngressPort OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Collector's ingress port number."
    ::= { tnSACommonTestResultsEntry 52 }

tnSACommonTestResultsTestCir OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CIR. In Kbps."
    ::= { tnSACommonTestResultsEntry 53 }

tnSACommonTestResultsTestCbs OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CBS. In bytes."
    ::= { tnSACommonTestResultsEntry 54 }

tnSACommonTestResultsTestEir OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "EIR. In Kbps."
    ::= { tnSACommonTestResultsEntry 55 }

tnSACommonTestResultsTestEbs OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "EBS. In bytes."
    ::= { tnSACommonTestResultsEntry 56 }

--
--    Common Test Results. DM bins threshold table
--
tnSACommonTestResultsDmBinThresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSACommonTestResultsDmBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of DM bin thresholds used for this test."
    ::= { tnSaMIB 13 }

tnSACommonTestResultsDmBinThresholdEntry  OBJECT-TYPE
    SYNTAX TnSACommonTestResultsDmBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the SA tnSACommonTestResultsDmBinThresholdTable."
    INDEX {
        tnSACommonTestResultsTestId,
        tnSACommonTestResultsDmBinThresholdIndex
    } ::= { tnSACommonTestResultsDmBinThresholdTable 1 }

TnSACommonTestResultsDmBinThresholdEntry ::= SEQUENCE {
    tnSACommonTestResultsDmBinThresholdIndex Unsigned32,
    tnSACommonTestResultsDmBinThresholdValue Unsigned32
}

tnSACommonTestResultsDmBinThresholdIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "DM bin threshold index."
    ::= { tnSACommonTestResultsDmBinThresholdEntry 1 }

tnSACommonTestResultsDmBinThresholdValue OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DM bin threshold value in usec."
    ::= { tnSACommonTestResultsDmBinThresholdEntry 2 }

--
--    Common Test Results. DMV bins threshold table
--
tnSACommonTestResultsDmvBinThresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSACommonTestResultsDmvBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of DMV bin thresholds used fot this test."
    ::= { tnSaMIB 14 }

tnSACommonTestResultsDmvBinThresholdEntry  OBJECT-TYPE
    SYNTAX TnSACommonTestResultsDmvBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the SA tnSACommonTestResultsDmvBinThresholdTable."
    INDEX {
        tnSACommonTestResultsTestId,
        tnSACommonTestResultsDmvBinThresholdIndex
    } ::= { tnSACommonTestResultsDmvBinThresholdTable 1 }

TnSACommonTestResultsDmvBinThresholdEntry ::= SEQUENCE {
    tnSACommonTestResultsDmvBinThresholdIndex Unsigned32,
    tnSACommonTestResultsDmvBinThresholdValue Unsigned32
}

tnSACommonTestResultsDmvBinThresholdIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "DM bin threshold index."
    ::= { tnSACommonTestResultsDmvBinThresholdEntry 1 }

tnSACommonTestResultsDmvBinThresholdValue OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DM bin threshold value in usec. Zero value is used to delete threshold."
    ::= { tnSACommonTestResultsDmvBinThresholdEntry 2 }

--
-- Throughput Test Results
--
tnSAThroughputTestResultsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSAThroughputTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for Throughput Test Results."
    ::= { tnSaMIB 15 }

tnSAThroughputTestResultsEntry OBJECT-TYPE
    SYNTAX TnSAThroughputTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSAThroughputTestResultsTable."
    INDEX {
        tnSAThroughputTestResultsTestId,
        tnSAThroughputTestResultsStepNumber
    }
    ::= { tnSAThroughputTestResultsTable 1 }

TnSAThroughputTestResultsEntry ::= SEQUENCE {
    tnSAThroughputTestResultsTestId Unsigned32,
    tnSAThroughputTestResultsStepNumber Unsigned32,
    tnSAThroughputTestResultsDirection TnSATestDirection,
    tnSAThroughputTestResultsActualRate Counter64,
    tnSAThroughputTestResultsStepDuration Unsigned32,
    tnSAThroughputTestResultsTxFrames Counter64,
    tnSAThroughputTestResultsRxGreenFrames Counter64,
    tnSAThroughputTestResultsRxYellowFrames Counter64,
    tnSAThroughputTestResultsStepResult TnSATestStepResult,
    tnSAThroughputTestResultsFrameSize Unsigned32
}

tnSAThroughputTestResultsTestId OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The report Test ID."
    ::= { tnSAThroughputTestResultsEntry 1 }

tnSAThroughputTestResultsStepNumber OBJECT-TYPE
    SYNTAX Unsigned32(1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Test step number."
    ::= { tnSAThroughputTestResultsEntry 2 }

tnSAThroughputTestResultsDirection OBJECT-TYPE
    SYNTAX TnSATestDirection
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The report direction."
    ::= { tnSAThroughputTestResultsEntry 3 }

tnSAThroughputTestResultsActualRate OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Actual rate in Kbps."
    ::= { tnSAThroughputTestResultsEntry 4 }

tnSAThroughputTestResultsStepDuration OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step duration in seconds."
    ::= { tnSAThroughputTestResultsEntry 5 }

tnSAThroughputTestResultsTxFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Transmitted frames."
    ::= { tnSAThroughputTestResultsEntry 6 }

tnSAThroughputTestResultsRxGreenFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Received green frames."
    ::= { tnSAThroughputTestResultsEntry 7 }

tnSAThroughputTestResultsRxYellowFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Received yellow frames."
    ::= { tnSAThroughputTestResultsEntry 8 }

tnSAThroughputTestResultsStepResult OBJECT-TYPE
    SYNTAX TnSATestStepResult
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step result."
    ::= { tnSAThroughputTestResultsEntry 9 }

tnSAThroughputTestResultsFrameSize OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Frame size."
    ::= { tnSAThroughputTestResultsEntry 10 }

--
-- Latency Test Results
--
tnSALatencyTestResultsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSALatencyTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for Latency Test Results."
    ::= { tnSaMIB 16 }

tnSALatencyTestResultsEntry OBJECT-TYPE
    SYNTAX TnSALatencyTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSALatencyTestResultsTable."
    INDEX {
        tnSALatencyTestResultsTestId,
        tnSALatencyTestResultsStepNumber
    }
    ::= { tnSALatencyTestResultsTable 1 }

TnSALatencyTestResultsEntry ::= SEQUENCE {
    tnSALatencyTestResultsTestId Unsigned32,
    tnSALatencyTestResultsStepNumber Unsigned32,
    tnSALatencyTestResultsDirection TnSATestDirection,
    tnSALatencyTestResultsStepDuration Unsigned32,
    tnSALatencyTestResultsFrameSize Unsigned32,
    tnSALatencyTestResultsStepResult TnSATestStepResult,
    tnSALatencyTestResultsDmMin Unsigned32,
    tnSALatencyTestResultsDmMax Unsigned32,
    tnSALatencyTestResultsDmAvg Unsigned32,
    tnSALatencyTestResultsDmvMin Unsigned32,
    tnSALatencyTestResultsDmvMax Unsigned32,
    tnSALatencyTestResultsDmvAvg Unsigned32
}

tnSALatencyTestResultsTestId OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The report Test ID."
    ::= { tnSALatencyTestResultsEntry 1 }

tnSALatencyTestResultsStepNumber OBJECT-TYPE
    SYNTAX Unsigned32(1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Test step number."
    ::= { tnSALatencyTestResultsEntry 2 }

tnSALatencyTestResultsDirection OBJECT-TYPE
    SYNTAX TnSATestDirection
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The report direction."
    ::= { tnSALatencyTestResultsEntry 3 }

tnSALatencyTestResultsStepDuration OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step duration in seconds."
    ::= { tnSALatencyTestResultsEntry 4 }

tnSALatencyTestResultsFrameSize OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Frame size."
    ::= { tnSALatencyTestResultsEntry 5 }

tnSALatencyTestResultsStepResult OBJECT-TYPE
    SYNTAX TnSATestStepResult
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step result."
    ::= { tnSALatencyTestResultsEntry 6 }

tnSALatencyTestResultsDmMin OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Minimal delay in us."
    ::= { tnSALatencyTestResultsEntry 7 }

tnSALatencyTestResultsDmMax OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Maximal delay in us."
    ::= { tnSALatencyTestResultsEntry 8 }

tnSALatencyTestResultsDmAvg OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average delay in us."
    ::= { tnSALatencyTestResultsEntry 9 }

tnSALatencyTestResultsDmvMin OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Minimal delay variation in us."
    ::= { tnSALatencyTestResultsEntry 10 }

tnSALatencyTestResultsDmvMax OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Maximal delay variation in us."
    ::= { tnSALatencyTestResultsEntry 11 }

tnSALatencyTestResultsDmvAvg OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Average delay variation in us."
    ::= { tnSALatencyTestResultsEntry 12 }



--
--    Latency DM bins threshold results table
--
tnSALatencyTestResultsDmBinThresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSALatencyTestResultsDmBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for Latency test DM bin counters."
    ::= { tnSaMIB 17 }

tnSALatencyTestResultsDmBinThresholdEntry  OBJECT-TYPE
    SYNTAX TnSALatencyTestResultsDmBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the SA tnSALatencyTestResultsDmBinThresholdTable."
    INDEX {
        tnSALatencyTestResultsTestId,
        tnSALatencyTestResultsStepNumber,
        tnSALatencyTestResultsDmBinThresholdIndex
    } ::= { tnSALatencyTestResultsDmBinThresholdTable 1 }

TnSALatencyTestResultsDmBinThresholdEntry ::= SEQUENCE {
    tnSALatencyTestResultsDmBinThresholdIndex Unsigned32,
    tnSALatencyTestResultsDmBinThresholdRange Unsigned32,
    tnSALatencyTestResultsDmBinThresholdValue Unsigned32
}

tnSALatencyTestResultsDmBinThresholdIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "DM bin threshold index."
    ::= { tnSALatencyTestResultsDmBinThresholdEntry 1 }

tnSALatencyTestResultsDmBinThresholdRange OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DM bin threshold range."
    ::= { tnSALatencyTestResultsDmBinThresholdEntry 2 }

tnSALatencyTestResultsDmBinThresholdValue OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DM bin counter."
    ::= { tnSALatencyTestResultsDmBinThresholdEntry 3 }

--
--    Latency DMV bins threshold results table
--
tnSALatencyTestResultsDmvBinThresholdTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSALatencyTestResultsDmvBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for Latency test DMV bin counters."
    ::= { tnSaMIB 18 }

tnSALatencyTestResultsDmvBinThresholdEntry  OBJECT-TYPE
    SYNTAX TnSALatencyTestResultsDmvBinThresholdEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the SA tnSALatencyTestResultsDmvBinThresholdTable."
    INDEX {
        tnSALatencyTestResultsTestId,
        tnSALatencyTestResultsStepNumber,
        tnSALatencyTestResultsDmvBinThresholdIndex
    } ::= { tnSALatencyTestResultsDmvBinThresholdTable 1 }

TnSALatencyTestResultsDmvBinThresholdEntry ::= SEQUENCE {
    tnSALatencyTestResultsDmvBinThresholdIndex Unsigned32,
    tnSALatencyTestResultsDmvBinThresholdRange Unsigned32,
    tnSALatencyTestResultsDmvBinThresholdValue Unsigned32
}

tnSALatencyTestResultsDmvBinThresholdIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "DM bin threshold index."
    ::= { tnSALatencyTestResultsDmvBinThresholdEntry 1 }

tnSALatencyTestResultsDmvBinThresholdRange OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DMV bin threshold range."
    ::= { tnSALatencyTestResultsDmvBinThresholdEntry 2 }

tnSALatencyTestResultsDmvBinThresholdValue OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "DMV bin counter."
    ::= { tnSALatencyTestResultsDmvBinThresholdEntry 3 }

--
-- Flr Test Results
--
tnSAFlrTestResultsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSAFlrTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for FLR Test Results."
    ::= { tnSaMIB 19 }

tnSAFlrTestResultsEntry OBJECT-TYPE
    SYNTAX TnSAFlrTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSAFlrTestResultsTable."
    INDEX {
        tnSAFlrTestResultsTestId,
        tnSAFlrTestResultsStepNumber
    }
    ::= { tnSAFlrTestResultsTable 1 }

TnSAFlrTestResultsEntry ::= SEQUENCE {
    tnSAFlrTestResultsTestId Unsigned32,
    tnSAFlrTestResultsStepNumber Unsigned32,
    tnSAFlrTestResultsDirection TnSATestDirection,
    tnSAFlrTestResultsActualRate Counter64,
    tnSAFlrTestResultsStepDuration Unsigned32,
    tnSAFlrTestResultsTxFrames Counter64,
    tnSAFlrTestResultsRxGreenFrames Counter64,
    tnSAFlrTestResultsRxYellowFrames Counter64,
    tnSAFlrTestResultsFlr Unsigned32,
    tnSAFlrTestResultsStepResult TnSATestStepResult,
    tnSAFlrTestResultsFrameSize Unsigned32,
    tnSAFlrTestResultsOutOfSeqEvents Unsigned32
}

tnSAFlrTestResultsTestId OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The report Test ID."
    ::= { tnSAFlrTestResultsEntry 1 }

tnSAFlrTestResultsStepNumber OBJECT-TYPE
    SYNTAX Unsigned32(1..10)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Test step number."
    ::= { tnSAFlrTestResultsEntry 2 }

tnSAFlrTestResultsDirection OBJECT-TYPE
    SYNTAX TnSATestDirection
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The report direction."
    ::= { tnSAFlrTestResultsEntry 3 }

tnSAFlrTestResultsActualRate OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Actual rate in Kbps."
    ::= { tnSAFlrTestResultsEntry 4 }

tnSAFlrTestResultsStepDuration OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step duration in seconds."
    ::= { tnSAFlrTestResultsEntry 5 }

tnSAFlrTestResultsTxFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Transmitted frames."
    ::= { tnSAFlrTestResultsEntry 6 }

tnSAFlrTestResultsRxGreenFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Received green frames."
    ::= { tnSAFlrTestResultsEntry 7 }

tnSAFlrTestResultsRxYellowFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Received yellow frames."
    ::= { tnSAFlrTestResultsEntry 8 }

tnSAFlrTestResultsFlr OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Calculated frame loss ratio."
    ::= { tnSAFlrTestResultsEntry 9 }

tnSAFlrTestResultsStepResult OBJECT-TYPE
    SYNTAX TnSATestStepResult
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step result."
    ::= { tnSAFlrTestResultsEntry 10 }

tnSAFlrTestResultsFrameSize OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Frame size."
    ::= { tnSAFlrTestResultsEntry 11 }

tnSAFlrTestResultsOutOfSeqEvents OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Out of sequence events."
    ::= { tnSAFlrTestResultsEntry 12 }

--
-- BackToBack Test Results
--
tnSABackToBackTestResultsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSABackToBackTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for Back to Back Test Results."
    ::= { tnSaMIB 20 }

tnSABackToBackTestResultsEntry OBJECT-TYPE
    SYNTAX TnSABackToBackTestResultsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSABackToBackTestResultsTable."
    INDEX {
        tnSABackToBackTestResultsTestId,
        tnSABackToBackTestResultsStepNumber
    }
    ::= { tnSABackToBackTestResultsTable 1 }

TnSABackToBackTestResultsEntry ::= SEQUENCE {
    tnSABackToBackTestResultsTestId Unsigned32,
    tnSABackToBackTestResultsStepNumber Unsigned32,
    tnSABackToBackTestResultsDirection TnSATestDirection,
    tnSABackToBackTestResultsActualRate Unsigned32,
    tnSABackToBackTestResultsStepDuration Unsigned32,
    tnSABackToBackTestResultsTxFrames Counter64,
    tnSABackToBackTestResultsRxGreenFrames Counter64,
    tnSABackToBackTestResultsRxYellowFrames Counter64,
    tnSABackToBackTestResultsFlr Unsigned32,
    tnSABackToBackTestResultsStepResult TnSATestStepResult,
    tnSABackToBackTestResultsBurstSize Unsigned32
}

tnSABackToBackTestResultsTestId OBJECT-TYPE
    SYNTAX Unsigned32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The report Test ID."
    ::= { tnSABackToBackTestResultsEntry 1 }

tnSABackToBackTestResultsStepNumber OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Test step number."
    ::= { tnSABackToBackTestResultsEntry 2 }

tnSABackToBackTestResultsDirection OBJECT-TYPE
    SYNTAX TnSATestDirection
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The report direction."
    ::= { tnSABackToBackTestResultsEntry 3 }

tnSABackToBackTestResultsActualRate OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Actual rate in Kbps."
    ::= { tnSABackToBackTestResultsEntry 4 }

tnSABackToBackTestResultsStepDuration OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step duration in seconds."
    ::= { tnSABackToBackTestResultsEntry 5 }

tnSABackToBackTestResultsTxFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Transmitted frames."
    ::= { tnSABackToBackTestResultsEntry 6 }

tnSABackToBackTestResultsRxGreenFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Received green frames."
    ::= { tnSABackToBackTestResultsEntry 7 }

tnSABackToBackTestResultsRxYellowFrames OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Received yellow frames."
    ::= { tnSABackToBackTestResultsEntry 8 }

tnSABackToBackTestResultsFlr OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Calculated frame loss ratio."
    ::= { tnSABackToBackTestResultsEntry 9 }

tnSABackToBackTestResultsStepResult OBJECT-TYPE
    SYNTAX TnSATestStepResult
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Step result."
    ::= { tnSABackToBackTestResultsEntry 10 }

tnSABackToBackTestResultsBurstSize OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Burts size."
    ::= { tnSABackToBackTestResultsEntry 11 }

--
-- Save Report
--
tnSAsaveRptTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TnSAsaveRptEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table for saving results report to a file."
    ::= { tnSaMIB 21 }

tnSAsaveRptEntry OBJECT-TYPE
    SYNTAX TnSAsaveRptEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the tnSAsaveRptTable."
    INDEX {
        entPhysicalIndex,
    }
    ::= { tnSAsaveRptTable 1 }

TnSAsaveRptEntry ::= SEQUENCE {
    tnSAsaveRptNumber Unsigned32,
    tnSAsaveRptHostType InetAddressType,
    tnSAsaveRptHostName InetAddress,
    tnSAsaveRptFileName DisplayString,
    tnSAsaveRpt Unsigned32
}

tnSAsaveRptNumber OBJECT-TYPE
    SYNTAX Unsigned32 (1..16)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The report Test ID."
    ::= { tnSAsaveRptEntry 1 }

tnSAsaveRptHostType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address type of the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnSAsaveRptEntry 2 }

tnSAsaveRptHostName OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address of the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnSAsaveRptEntry 3 }

tnSAsaveRptFileName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Name of text file to save the test results."
    ::= { tnSAsaveRptEntry 4 }

tnSAsaveRpt OBJECT-TYPE
    SYNTAX      Unsigned32
                {
                    doNothing(0),
                    save(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Save the test results in a text file. The text file is saved asynchronously after which
                 the value of tnSAsaveRpt is returned to doNothing(0).
                 The file is saved in under 5 seconds."
    ::= { tnSAsaveRptEntry 5 }

END