david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/ubiquoss/UBQS-CFM-MIB

2561 lines
89 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- UBQS-CFM-MIB: Ubiquoss CFM MIB
--
-- Nov 2010, Park Hyung Eun
--
-- Copyright (c) 2010 by Ubiquoss, Corp.
-- All rights reserved.
-- *****************************************************************
--
UBQS-CFM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
IpAddress,
Gauge32,
Integer32,
Unsigned32,
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP,
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
RowStatus,
DisplayString,
TruthValue,
MacAddress,
FROM SNMPv2-TC
ubiAggId,
FROM UBQS-LAG-MIB
ifIndex,
FROM IF-MIB
ubiMgmtv2
FROM UBQS-SMI;
ubiCFMMIB MODULE-IDENTITY
LAST-UPDATED "201011250000Z"
ORGANIZATION "Ubiquoss Corp."
CONTACT-INFO
" Ubiquoss
Customer Service
Postal: 24F Milennium B/D,
467-12, Dogok-Dong,
GangNam-Gu, Seoul 135-270
Korea
Tel: 82-2-2190-3100"
DESCRIPTION
"Connectivity Fault Management module for managing IEEE 802.1ag"
::= { ubiMgmtv2 10 }
-- *****************************************************************
-- Textual Conventions
-- *****************************************************************
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VLAN-id of a VLAN on ISL or 802.1q trunks.
Modification of default parameters is allowed.
Implementations are allowed to restrict
the range of VLANs.
For entities support up to 1024 VLANS.
VLANs above 1000 are reserved for default VLANs and
future use. Modification of default parameters is
allowed. Creation or deletion of VLANs above 1000 is not
allowed.
For a new object which needs the vlan-id of a VLAN as
its SYNTAX, it is suggested to import VlanIndex from
Q-BRIDGE-MIB instead of importing this TC here in
ubi-VTP-MIB."
SYNTAX Integer32 (0..4095)
Dot1agCfmMaintDomainNameType2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a type (and thereby the format)
of a Dot1agCfmMaintDomainName. The value can be one of
the following:
ieeeReserved(0) Reserved for definition by IEEE 802.1
recommend to not use zero unless
absolutely needed.
none(1) No format specified, usually because
there is not (yet) a Maintenance
Domain Name. In this case, a zero
length OCTET STRING for the Domain
Name field is acceptable.
dnsLikeName(2) Domain Name like string, globally unique
text string derived from a DNS name.
macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
charString(4) RFC2579 DisplayString, except that the
character codes 0-31 (decimal) are not
used.
ieeeReserved(xx) Reserved for definition by IEEE 802.1
xx values can be [5..31] and [64..255]
ituReserved(xx) Reserved for definition by ITU-T Y.1731
xx values range from [32..63]
To support future extensions, the Dot1agCfmMaintDomainNameType
textual convention SHOULD NOT be sub-typed in object type
definitions. It MAY be sub-typed in compliance statements in
order to require only a subset of these address types for a
compliant implementation.
Implementations MUST ensure that Dot1agCfmMaintDomainNameType
objects and any dependent objects (e.g.,
Dot1agCfmMaintDomainName objects) are consistent. An
inconsistentValue error MUST be generated if an attempt to
change an Dot1agCfmMaintDomainNameType object would, for
example, lead to an undefined Dot1agCfmMaintDomainName value.
In particular,
Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs
MUST be changed together if the nameType changes.
"
REFERENCE
"21.6.5, Table 21-19"
SYNTAX INTEGER {
none (1), -- no md name
dnsLikeName (2), -- dns name
macAddressAndUint (3), -- mac addr
charString (4), -- string
itu_t (32) -- itu-t
}
Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Maintenance Domain Name.
A Dot1agCfmMaintDomainName value is always interpreted within
the context of a Dot1agCfmMaintDomainNameType value. Every
usage of the Dot1agCfmMaintDomainName textual convention is
required to specify the Dot1agCfmMaintDomainNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintDomainNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintDomainName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintDomainName object MUST always
be consistent with the value of the associated
Dot1agCfmMaintDomainNameType object. Attempts to set
an Dot1agCfmMaintDomainName object to a value inconsistent
with the associated Dot1agCfmMaintDomainNameType MUST fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
A value of none(1) in the associated
Dot1agCfmMaintDomainNameType object means that no Maintenance
Domain name is present, and the contents of the
Dot1agCfmMaintDomainName object are meaningless.
See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
TEXTUAL-CONVENTION for a discussion of the length limits on
the Maintenance Domain name and Maintenance Association name.
"
REFERENCE
"21.6.5"
SYNTAX OCTET STRING (SIZE(1..256))
Dot1agCfmMaintAssocNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a type (and thereby the format)
of a Dot1agCfmMaintAssocName. The value can be one of
the following:
ieeeReserved(0) Reserved for definition by IEEE 802.1
recommend to not use zero unless
absolutely needed.
primaryVid(1) Primary VLAN ID.
12 bits represented in a 2-octet integer:
- 4 least significant bits of the first
byte contains the 4 most significant
bits of the 12 bits primary VID
- second byte contains the 8 least
significant bits of the primary VID
0 1 2 3 4 5 6 7 8
+-+-+-+-+-+-+-+-+
|0 0 0 0| (MSB) |
+-+-+-+-+-+-+-+-+
| VID LSB |
+-+-+-+-+-+-+-+-+
charString(2) RFC2579 DisplayString, except that the
character codes 0-31 (decimal) are not
used. (1..45) octets
unsignedInt16 (3) 2-octet integer/big endian
rfc2865VpnId(4) RFC 2685 VPN ID
3 octet VPN authority Organizationally
Unique Identifier followed by 4 octet VPN
index identifying VPN according to the OUI:
0 1 2 3 4 5 6 7 8
+-+-+-+-+-+-+-+-+
| VPN OUI (MSB) |
+-+-+-+-+-+-+-+-+
| VPN OUI |
+-+-+-+-+-+-+-+-+
| VPN OUI (LSB) |
+-+-+-+-+-+-+-+-+
|VPN Index (MSB)|
+-+-+-+-+-+-+-+-+
| VPN Index |
+-+-+-+-+-+-+-+-+
| VPN Index |
+-+-+-+-+-+-+-+-+
|VPN Index (LSB)|
+-+-+-+-+-+-+-+-+
ieeeReserved(xx) Reserved for definition by IEEE 802.1
xx values can be [5..31] and [64..255]
ituReserved(xx) Reserved for definition by ITU-T Y.1731
xx values range from [32..63]
To support future extensions, the Dot1agCfmMaintAssocNameType
textual convention SHOULD NOT be sub-typed in object type
definitions. It MAY be sub-typed in compliance statements in
order to require only a subset of these address types for a
compliant implementation.
Implementations MUST ensure that Dot1agCfmMaintAssocNameType
objects and any dependent objects (e.g.,
Dot1agCfmMaintAssocName objects) are consistent. An
inconsistentValue error MUST be generated if an attempt to
change an Dot1agCfmMaintAssocNameType object would, for
example, lead to an undefined Dot1agCfmMaintAssocName value.
In particular,
Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs
MUST be changed together if the nameType changes.
The Maintenance Domain name and Maintenance Association name,
when put together into the CCM PDU, MUST total 48 octets or
less. If the Dot1agCfmMaintDomainNameType object contains
none(1), then the Dot1agCfmMaintAssocName object MUST be
45 octets or less in length. Otherwise, the length of
the Dot1agCfmMaintDomainName object plus the length of the
Dot1agCfmMaintAssocName object, added together, MUST total
less than or equal to 44 octets.
"
REFERENCE
"21.6.5.4, Table 21-20"
SYNTAX INTEGER {
primaryVid (1),
charString (2),
unsignedInt16 (3),
rfc2865VpnId (4)
}
Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Maintenance Association Name. It is the
part of the Maintenance Association Identifier which is
unique within the Maintenance Domain Name and is appended
to the Maintenance Domain Name to form the Maintenance
Association Identifier (MAID).
A Dot1agCfmMaintAssocName value is always interpreted within
the context of a Dot1agCfmMaintAssocNameType value. Every
usage of the Dot1agCfmMaintAssocName textual convention is
required to specify the Dot1agCfmMaintAssocNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintAssocNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintAssocName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintAssocName object MUST
always be consistent with the value of the associated
Dot1agCfmMaintAssocNameType object. Attempts to set
an Dot1agCfmMaintAssocName object to a value inconsistent
with the associated Dot1agCfmMaintAssocNameType MUST fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
"
REFERENCE
"802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
SYNTAX OCTET STRING (SIZE(1..256))
Dot1agCfmMDLevel ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM PDUs. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links.
"
REFERENCE
"802.1ag clauses 18.3, 21.4.1"
SYNTAX Integer32 (0..7)
Dot1agCfmMDLevelOrNone ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM packets. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links.
The value (-1) is reserved to indicate that no MA Level has
been assigned.
"
REFERENCE
"802.1ag clauses 18.3, 12.14.3.1.3:c"
SYNTAX Integer32 (-1 | 0..7)
Dot1agCfmMpDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the direction in which the Maintenance
association (MEP or MIP) faces on the bridge port:
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Messages towards the
MAC Relay Entity.
"
REFERENCE
"802.1ag clauses 12.14.6.3.2:c"
SYNTAX INTEGER {
down (1),
up (2)
}
Dot1agCfmPortStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value from he Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the
Bridge Port on which the transmitting MEP resides to pass
ordinary data, regardless of the status of the MAC
(Table 21-10).
psNoPortStateTLV(0) Indicates either that no CCM has been
received or that no port status TLV was
present in the last CCM received.
psBlocked(1) Ordinary data cannot pass freely through
the port on which the remote MEP resides.
Value of enableRmepDefect is equal to
false.
psUp(2): Ordinary data can pass freely through
the port on which the remote MEP resides.
Value of enableRmepDefect is equal to
true.
NOTE: A 0 value is used for psNoPortStateTLV, so that
additional code points can be added in a manner
consistent with the Dot1agCfmInterfaceStatus textual
convention.
"
REFERENCE
"12.14.7.6.3:f, 20.19.3 and 21.5.4"
SYNTAX INTEGER {
psNoPortStateTLV (0),
psBlocked (1),
psUp (2)
}
Dot1agCfmInterfaceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value from the Interface Status TLV from the
last CCM received from the last MEP. It indicates the status
of the Interface within which the MEP transmitting the CCM
is configured, or the next lower Interface in the Interface
Stack, if the MEP is not configured within an Interface.
isNoInterfaceStatusTLV(0) Indicates either that no CCM has been
received or that no interface status TLV
was present in the last CCM received.
isUp(1) The interface is ready to pass packets.
isDown(2) The interface cannot pass packets
isTesting(3) The interface is in some test mode.
isUnknown(4) The interface status cannot be determined
for some reason.
isDormant(5) The interface is not in a state to pass
packets but is in a pending state, waiting
for some external event.
isNotPresent(6) Some component of the interface is missing
isLowerLayerDown(7) The interface is down due to state of the
lower layer interfaces
NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that
these code points can be kept consistent with new code
points added to ifOperStatus in the IF-MIB.
"
REFERENCE
"12.14.7.6.3:g, 20.19.4 and 21.5.5"
SYNTAX INTEGER {
isNoInterfaceStatusTLV (0),
isUp (1),
isDown (2),
isTesting (3),
isUnknown (4),
isDormant (5),
isNotPresent (6),
isLowerLayerDown (7)
}
Dot1agCfmHighestDefectPri ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value, equal to the contents of the variable
highestDefect (20.33.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP
Fault Notification Generator State Machine was last in the
FNG_RESET state, either:
none(0) no defects since FNG_RESET
defRDICCM(1) DefRDICCM
defMACstatus(2) DefMACstatus
defRemoteCCM(3) DefRemoteCCM
defErrorCCM(4) DefErrorCCM
defXconCCM(5) DefXconCCM
The value 0 is used for no defects so that additional higher
priority values can be added, if needed, at a later time, and
so that these values correspond with those in
Dot1agCfmLowestAlarmPri.
"
REFERENCE
"20.1.2, 12.14.7.7.2:c and 20.33.9"
SYNTAX INTEGER {
none (0),
defRDICCM (1),
defMACstatus (2),
defRemoteCCM (3),
defErrorCCM (4),
defXconCCM (5)
}
Dot1agCfmLowestAlarmPri ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer value specifying the lowest priority defect
that is allowed to generate a Fault Alarm (20.9.5), either:
allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM,
DefErrorCCM, and DefXconCCM;
macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM,
DefErrorCCM, and DefXconCCM (default);
remErrXcon(3) Only DefRemoteCCM, DefErrorCCM,
and DefXconCCM;
errXcon(4) Only DefErrorCCM and DefXconCCM;
xcon(5) Only DefXconCCM; or
noXcon(6) No defects DefXcon or lower are to be
reported;
"
REFERENCE
"12.14.7.1.3:k and 20.9.5"
SYNTAX INTEGER {
allDef (1),
macRemErrXcon (2),
remErrXcon (3),
errXcon (4),
xcon (5),
noXcon (6)
}
Dot1agCfmMepId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
"
REFERENCE
"802.1ag clauses 3.19 and 19.2.1"
SYNTAX Unsigned32 (1..8191)
Dot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
The special value 0 is allowed to indicate special cases, for
example that no MEPID is configured.
Whenever an object is defined with this SYNTAX, then the
DESCRIPTION clause of such an object MUST specify what the
special value of 0 means.
"
REFERENCE
"19.2.1"
SYNTAX Unsigned32 (0 | 1..8191)
Dot1agCfmMhfCreation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates if the Management Entity can create MHFs.
The valid values are:
defMHFnone(1) No MHFs can be created for this VID.
defMHFdefault(2) MHFs can be created on this VID on any
Bridge port through which this VID can
pass.
defMHFexplicit(3) MHFs can be created for this VID only on
Bridge ports through which this VID can
pass, and only if a MEP is created at some
lower MD Level.
defMHFdefer(4) The creation of MHFs is determined by the
corresponding Maintenance Domain variable
(dot1agCfmMaCompMhfCreation).
"
REFERENCE
"12.14.5.1.3:c and 22.2.3"
SYNTAX INTEGER {
defMHFnone (1),
defMHFdefault (2),
defMHFexplicit (3),
defMHFdefer (4)
}
Dot1agCfmIdPermission ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates what, if anything, is to be included in the Sender
ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid
values are:
sendIdNone(1) The Sender ID TLV is not to be sent.
sendIdChassis(2) The Chassis ID Length, Chassis ID
Subtype, and Chassis ID fields of the
Sender ID TLV are to be sent.
sendIdManage(3) The Management Address Length and
Management Address of the Sender ID TLV
are to be sent.
sendIdChassisManage(4) The Chassis ID Length, Chassis ID
Subtype, Chassis ID, Management Address
Length and Management Address fields are
all to be sent.
sendIdDefer(5) The contents of the Sender ID TLV are
determined by the corresponding
Maintenance Domain variable
(dot1agCfmMaCompIdPermission).
"
REFERENCE
"12.14.6.1.3:d and 21.5.3"
SYNTAX INTEGER {
sendIdNone (1),
sendIdChassis (2),
sendIdManage (3),
sendIdChassisManage (4),
sendIdDefer (5)
}
Dot1agCfmCcmInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interval at which CCMs are sent by a MEP.
The possible values are:
intervalInvalid(0) No CCMs are sent (disabled).
interval300Hz(1) CCMs are sent every 3 1/3 milliseconds
(300Hz).
interval10ms(2) CCMs are sent every 10 milliseconds.
interval100ms(3) CCMs are sent every 100 milliseconds.
interval1s(4) CCMs are sent every 1 second.
interval10s(5) CCMs are sent every 10 seconds.
interval1min(6) CCMs are sent every minute.
interval10min(7) CCMs are sent every 10 minutes.
Note: enumerations start at zero to match the 'CCM Interval
field' protocol field.
"
REFERENCE
"802.1ag clauses 12.14.6.1.3:e, 20.8.1 and 21.6.1.3"
SYNTAX INTEGER {
intervalInvalid (0),
interval300Hz (1),
interval10ms (2),
interval100ms (3),
interval1s (4),
interval10s (5),
interval1min (6),
interval10min (7)
}
Dot1agCfmFngState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the diferent states of the MEP Fault Notification
Generator State Machine.
fngReset(1) No defect has been present since the
dot1agCfmMepFngResetTime timer
expired, or since the state machine
was last reset.
fngDefect(2) A defect is present, but not for a
long enough time to be reported
(dot1agCfmMepFngAlarmTime).
fngReportDefect(3) A momentary state during which the
defect is reported by sending a
dot1agCfmFaultAlarm notification,
if that action is enabled.
fngDefectReported(4) A defect is present, and some defect
has been reported.
fngDefectClearing(5) No defect is present, but the
dot1agCfmMepFngResetTime timer has
not yet expired.
"
REFERENCE
"12.14.7.1.3:f and 20.35"
SYNTAX INTEGER {
fngReset (1),
fngDefect (2),
fngReportDefect (3),
fngDefectReported (4),
fngDefectClearing (5)
}
Dot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values the Relay action field can take."
REFERENCE
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and
Table 21-27"
SYNTAX INTEGER {
rlyHit (1),
rlyFdb (2),
rlyMpdb (3)
}
Dot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values returned in the ingress action field."
REFERENCE
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and
Table 21-30
"
SYNTAX INTEGER {
ingNoTlv (0),
ingOk (1),
ingDown (2),
ingBlocked (3),
ingVid (4)
}
Dot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values returned in the egress action field"
REFERENCE
"802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and
Table 21-32"
SYNTAX INTEGER {
egrNoTlv (0),
egrOK (1),
egrDown (2),
egrBlocked (3),
egrVid (4)
}
Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational state of the remote MEP state machine. This
state machine monitors the reception of valid CCMs from a
remote MEP with a specific MEPID. It uses a timer that
expires in 3.5 times the length of time indicated by the
dot1agCfmMaNetCcmInterval object.
rMepIdle(1) Momentary state during reset.
rMepStart(2) The timer has not expired since the
state machine was reset, and no valid
CCM has yet been received.
rMepFailed(3) The timer has expired, both since the
state machine was reset, and since a
valid CCM was received.
rMepOk(4) The timer has not expired since a
valid CCM was received.
"
REFERENCE
"802.1ag clauses 12.14.7.6.3:b, 20.22"
SYNTAX INTEGER {
rMepIdle (1),
rMepStart (2),
rMepFailed (3),
rMepOk (4)
}
Dot1afCfmIndexIntegerNextFree ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An integer which may be used as a new Index in a table.
The special value of 0 indicates that no more new entries can
be created in the relevant table.
When a MIB is used for configuration, an object with this
SYNTAX always contains a legal value (if non-zero) for an
index that is not currently used in the relevant table. The
Command Generator (Network Management Application) reads this
variable and uses the (non-zero) value read when creating a
new row with an SNMP SET. When the SET is performed, the
Command Responder (agent) MUST determine whether the value is
indeed still unused; Two Network Management Applications may
attempt to create a row (configuration entry) simultaneously
and use the same value. If it is currently unused, the SET
succeeds and the Command Responder (agent) changes the value
of this object, according to an implementation-specific
algorithm. If the value is in use, however, the SET fails.
The Network Management Application MUST then re-read this
variable to obtain a new usable value.
An OBJECT-TYPE definition using this SYNTAX MUST specify the
relevant table for which the object is providing this
functionality.
"
SYNTAX Unsigned32 (0..4294967295)
Dot1agCfmMepDefects ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A MEP can detect and report a number of defects, and multiple
defects can be present at the same time. These defects are:
bDefRDICCM(0) A remote MEP is reported the RDI bit in its
last CCM.
bDefMACstatus(1) Either some remote MEP is reporting its
Interface Status TLV as not isUp, or all remote
MEPs are reporting a Port Status TLV that
contains some value other than psUp.
bDefRemoteCCM(2) The MEP is not receiving valid CCMs from at
least one of the remote MEPs.
bDefErrorCCM(3) The MEP has received at least one invalid CCM
whose CCM Interval has not yet timed out.
bDefXconCCM(4) The MEP has received at least one CCM from
either another MAID or a lower MD Level whose
CCM Interval has not yet timed out.
"
REFERENCE
"802.1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
12.14.7.1.3:r, and 12.14.7.1.3:s."
SYNTAX BITS {
bDefRDICCM(0),
bDefMACstatus(1),
bDefRemoteCCM(2),
bDefErrorCCM(3),
bDefXconCCM(4)
}
Dot1agCfmConfigErrors ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"While making the MIP creation evaluation described in 802.1ag
clause 22.2.3, the management entity can encounter errors in
the configuration. These are possible errors that can be
encountered:
CFMleak(0) MA x is associated with a specific VID list,
one or more of the VIDs in MA x can pass through
the Bridge Port, no Down MEP is configured on
any Bridge Port for MA x, and some other MA y,
at a higher MD Level than MA x, and associated
with at least one of the VID(s) also in MA x,
does have a MEP configured on the Bridge Port.
conflictingVids(1) MA x is associated with a specific VID
list, an Up MEP is configured on MA x on the
Bridge Port, and some other MA y, associated
with at least one of the VID(s) also in MA x,
also has an Up MEP configured on some Bridge
Port.
ExcessiveLevels(2) The number of different MD Levels at
which MIPs are to be created on this port
exceeds the Bridge's capabilities (see
subclause 22.3).
OverlappedLevels(3) A MEP is created for one VID at one MD
Level, but a MEP is configured on another
VID at that MD Level or higher, exceeding
the Bridge's capabilities.
"
REFERENCE
"12.14.4.1.3:b and clauses 22.2.3 and 22.2.4"
SYNTAX BITS {
cfmLeak(0),
conflictingVids(1),
excessiveLevels(2),
overlappedLevels(3)
}
Dot1agCfmPbbComponentIdentifier
::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A Provider Backbone Bridge (PBB) can comprise a number of
components, each of which can be managed in a manner
essentially equivalent to an 802.1Q bridge. In order to access
these components easily, an index is used in a number of
tables. If any two tables are indexed by
Dot1agCfmPbbComponentIdentifier, then entries in those tables
indexed by the same value of Dot1agCfmPbbComponentIdentifier
correspond to the same component.
"
REFERENCE
"12.3 l)"
SYNTAX Unsigned32 (1..4294967295)
Dot1agCfmAisDefectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Kind of defect. It is reason why alram cuase."
SYNTAX INTEGER {
none (0),
all (1),
loc (2),
merge (3),
unExpMep (4),
unExpMegLvl (5),
unExpPeriod (6)
}
-- *****************************************************************
-- ubiCFMMIB
-- *****************************************************************
ubiCFMMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiCFMMIB 0 }
ubiCFMMIBObjects OBJECT IDENTIFIER ::= { ubiCFMMIB 1 }
ubiCFMMIBConformance OBJECT IDENTIFIER ::= { ubiCFMMIB 2 }
ubiCfmMd OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 1 }
ubiCfmMa OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 2 }
ubiCfmRmep OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 3 }
ubiCfmMep OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 4 }
ubiCfmServerMep OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 5 }
ubiCfmNotificationEnables OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 6 }
ubiCfmTrack OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 7 }
ubiCfmMepOamSend OBJECT IDENTIFIER ::= { ubiCfmMep 4 }
ubiCfmMepOamResult OBJECT IDENTIFIER ::= { ubiCfmMep 5 }
-- *****************************************************************
-- ubiCfmNotifications
-- *****************************************************************
ubiCfmNotifications OBJECT IDENTIFIER ::= { ubiCFMMIBNotificationPrefix 0 }
ubiCfmRemoteMepStatusChange NOTIFICATION-TYPE
OBJECTS {
ifIndex,
ubiCfmMdName,
ubiCfmMaName,
ubiCfmMepId,
ubiCfmRmepId,
ubiCfmRmepRemoteMacAddr,
ubiCfmRmepStatus,
}
STATUS current
DESCRIPTION
"Remote MEP state(CC state) change Notification"
::= { ubiCfmNotifications 1 }
ubiCfmAggPortRemoteMepStatusChange NOTIFICATION-TYPE
OBJECTS {
ubiAggId,
ifIndex,
ubiCfmMdName,
ubiCfmMaName,
ubiCfmMepId,
ubiCfmRmepId,
ubiCfmRmepRemoteMacAddr,
ubiCfmRmepStatus,
}
STATUS current
DESCRIPTION
"Notification that Remote MEP state(CC state) on port-gruop change"
::= { ubiCfmNotifications 2 }
ubiCfmPmFrameDelayEvent NOTIFICATION-TYPE
OBJECTS {
ubiCfmMepId,
ubiCfmMepIfname,
--ubiCfmMepPmCurrentValue,
ubiCfmMepPmDelayMin,
ubiCfmMepPmDelayMax,
ubiCfmMepPmDelayAvg,
ubiCfmMaPmDelayThreshold,
ubiCfmMepPmDelayState,
}
STATUS current
DESCRIPTION
"To generate notification when ubiCfmMepPmCurrentValue is bigger than
ubiCfmMaPmDelayThreshold"
::= { ubiCfmNotifications 3 }
ubiCfmPmFrameLossEvent NOTIFICATION-TYPE
OBJECTS {
ubiCfmMepId,
ubiCfmMepIfname,
-- ubiCfmMepPmCurrentValue,
uniCfmMepPmLossNearEndTot,
uniCfmMepPmLossFarEndTot,
ubiCfmMaPmLossThreshold,
ubiCfmMepPmLossState,
}
STATUS current
DESCRIPTION
"To generate notification when ubiCfmMepPmCurrentValue is bigger than
ubiCfmMaPmLossThreshold"
::= { ubiCfmNotifications 4 }
ubiCfmMepEtherPingSendResult NOTIFICATION-TYPE
OBJECTS {
ubiCfmMepOamSendBridgeId,
ubiCfmMepOamSendMdIndex,
ubiCfmMepOamSendMaIndex,
ubiCfmMepOamSendMepId,
ubiCfmMepOamResultEtherPing,
ubiCfmMepOamResultEtherPingSndCount,
ubiCfmMepOamResultEtherPingRcvCount,
ubiCfmMepOamResultEtherPingRttMin,
ubiCfmMepOamResultEtherPingRttMax,
ubiCfmMepOamResultEtherPingRttAvg
}
STATUS current
DESCRIPTION
"Indicates the result of the operation:
- ok The Loopback Message(s)reply received
- fail The Loopback Message(s)reply don't recieved
- already active Another LBM is being transmitted
- Not ready Do not initator state machine for LBM sending "
::= { ubiCfmNotifications 5 }
ubiCfmMepLinkTraceSendResult NOTIFICATION-TYPE
OBJECTS {
ubiCfmMepOamSendBridgeId,
ubiCfmMepOamSendMdIndex,
ubiCfmMepOamSendMaIndex,
ubiCfmMepOamSendMepId,
ubiCfmMepOamResultLinkTraceSrcMacAddr,
ubiCfmMepOamResultLinkTraceRcvIfIndex,
ubiCfmMepOamResultLinkTraceRelayAction,
ubiCfmMepOamResultLinkTraceHopCount
}
STATUS current
DESCRIPTION
"A LTR information about LTMs transmitted"
::= { ubiCfmNotifications 6 }
ubiCfmCCConfigDefectAlarm NOTIFICATION-TYPE
OBJECTS {
ubiBridgeId,
ubiCfmMdName,
ubiCfmMaName,
ubiCfmMepId,
ubiCfmMepCCConfigDefect,
ubiCfmMepCCConfigDefectState
}
STATUS current
DESCRIPTION
"The CCM defect about Config error"
::= { ubiCfmNotifications 7 }
-- *****************************************************************
-- ubiCfmMdTable
-- *****************************************************************
ubiCfmMdTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain.
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance"
::= { ubiCfmMd 1 }
ubiCfmMdEntry OBJECT-TYPE
SYNTAX UbiCfmMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Domain table entry.
INDEX { ubiBridgeId, ubiCfmMdIndex }"
INDEX { ubiBridgeId, ubiCfmMdIndex }
::= { ubiCfmMdTable 1 }
UbiCfmMdEntry ::= SEQUENCE {
ubiCfmMdIndex Unsigned32,
ubiCfmMdName Dot1agCfmMaintDomainName,
ubiCfmMdNameType Dot1agCfmMaintDomainNameType2,
ubiCfmMdLevel Dot1agCfmMDLevel,
ubiCfmMdMipCreation Dot1agCfmMhfCreation,
ubiCfmMdRowStatus RowStatus
}
ubiCfmMdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the Maintenance Domain table."
::= { ubiCfmMdEntry 1 }
ubiCfmMdName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Domain name.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain."
::= { ubiCfmMdEntry 2 }
ubiCfmMdNameType OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainNameType2
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Domain Name.
There are two types. IEEE802.1ag type(string, address...etc)
and ITU-T Y.1731 type (itu-t)"
::= { ubiCfmMdEntry 3 }
ubiCfmMdLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Maintenance Domain Level. (0 ~ 7 level)"
::= { ubiCfmMdEntry 4 }
ubiCfmMdMipCreation OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation {
defMHFnone (1),
defMHFdefault (2),
defMHFexplicit (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enumerated value indicating whether the management entity can
create MHFs (MIP Half Function) for this Maintenance Domain.
Since, in this variable, there is no encompassing Maintenance
Domain, the value defMHFdefer is not allowed."
::= { ubiCfmMdEntry 5 }
ubiCfmMdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmMdEntry 6 }
-- *****************************************************************
-- ubiCfmDefaultMdTable
-- *****************************************************************
ubiCfmDefaultMdTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmDefaultMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each bridge component, the Default MD Level Managed Object
controls MHF creation for VIDs that are not attached to a
specific Maintenance Association Managed Object, and Sender ID
TLV transmission by those MHFs.
For each Bridge Port, and for each VLAN ID whose data can
pass through that Bridge Port, an entry in this table is
used by the algorithm in subclause 22.2.3 only if there is no
entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined. If there exists such an
MA, that MA's objects are used by the algorithm in
subclause 22.2.3 in place of this table entry's objects. The
agent maintains the value of ubiCfmDefaultMdRowStatus to
indicate whether this entry is overridden by an MA.
When first initialized, the agent creates this table
automatically with entries for all VLAN IDs,
with the default values specified for each object."
::= { ubiCfmMd 2 }
ubiCfmDefaultMdEntry OBJECT-TYPE
SYNTAX UbiCfmDefaultMdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Default MD Level table entry."
INDEX { UbiBridgeId, ubiCfmDefaultMdVlanId }
::= { ubiCfmDefaultMdTable 1 }
UbiCfmDefaultMdEntry ::= SEQUENCE {
ubiCfmDefaultMdVlanId VlanIndex,
ubiCfmDefaultMdLevel Dot1agCfmMDLevel,
ubiCfmDefaultMdMipCreation Dot1agCfmMhfCreation,
ubiCfmDefaultMdRowStatus RowStatus
}
ubiCfmDefaultMdVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Primary VID of the VLAN to which this entry's objects
apply."
::= { ubiCfmDefaultMdEntry 1 }
ubiCfmDefaultMdLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for the VLAN to which this entry's objects
apply. If this object has the value -1, the MD Level for MHF
creation for this VLAN is controlled by
ubiCfmDefaultMdLevel."
::= { ubiCfmDefaultMdEntry 2 }
ubiCfmDefaultMdMipCreation OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation {
defMHFnone (1),
defMHFdefault (2),
defMHFexplicit (3),
defMHFdefer(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A value indicating if the Management entity can create MHFs
(MIP Half Function) for this VID at this MD Level. If this
object has the value defMHFdefer, MHF creation for this VLAN
is controlled by dot1agCfmDefaultMdDefMhfCreation.
The value of this variable is meaningless if the values of
ubiCfmDefaultMdMipCreation is false."
::= { ubiCfmDefaultMdEntry 3 }
ubiCfmDefaultMdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmDefaultMdEntry 4 }
-- *****************************************************************
-- ubiCfmMaTable
-- *****************************************************************
ubiCfmMaTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance."
::= { ubiCfmMa 1 }
ubiCfmMaEntry OBJECT-TYPE
SYNTAX UbiCfmMaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MA table entry."
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex }
::= { ubiCfmMaTable 1 }
UbiCfmMaEntry ::= SEQUENCE {
ubiCfmMaIndex Unsigned32,
ubiCfmMaName Dot1agCfmMaintAssocName,
ubiCfmMaNameType Dot1agCfmMaintAssocNameType,
ubiCfmMaVlanId VlanIndex,
ubiCfmMaMipCreation Dot1agCfmMhfCreation,
ubiCfmMaRowStatus RowStatus
}
ubiCfmMaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the Maintenance Association table."
::= { ubiCfmMaEntry 1 }
ubiCfmMaName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Short Maintenance Association name. This name MUST be unique within
a maintenance domain."
::= { ubiCfmMaEntry 2 }
ubiCfmMaNameType OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocNameType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (and thereby format) of the Maintenance Association Name."
::= { ubiCfmMaEntry 3 }
ubiCfmMaVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Primary VLAN ID with which the Maintenance Association is
associated, or 0 if the MA is not attached to any VID. "
::= { ubiCfmMaEntry 4 }
ubiCfmMaMipCreation OBJECT-TYPE
SYNTAX Dot1agCfmMhfCreation {
defMHFnone (1),
defMHFdefault (2),
defMHFexplicit (3),
defMHFdefer(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates if the Management entity can create MHFs (MIP Half
Function) for this MA."
::= { ubiCfmMaEntry 5 }
ubiCfmMaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmMaEntry 6 }
-- *****************************************************************
-- ubiCfmMaTable
-- *****************************************************************
ubiCfmMaAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMaAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Attribute table for each MA(Maintenance Association).
Such as, CCM transmission interval."
::= { ubiCfmMa 2 }
ubiCfmMaAttrEntry OBJECT-TYPE
SYNTAX UbiCfmMaAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An attribute entry"
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex }
::= { ubiCfmMaAttrTable 1 }
UbiCfmMaAttrEntry ::= SEQUENCE {
ubiCfmMaAttrCCInterval Integer32
}
ubiCfmMaAttrCCInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between CCM transmissions to be used by all MEPs
in the MA.
interval3ms(1) CCMs are sent every 3 1/3 milliseconds.
interval10ms(2) CCMs are sent every 10 milliseconds.
interval100ms(3) CCMs are sent every 100 milliseconds.
interval1s(4) CCMs are sent every 1 second.
interval10s(5) CCMs are sent every 10 seconds.
interval1min(6) CCMs are sent every minute.
interval10min(7) CCMs are sent every 10 minutes."
::= { ubiCfmMaAttrEntry 1 }
-- *****************************************************************
-- ubiCfmMaPmTable
-- *****************************************************************
ubiCfmMaPmTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMaPmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An attribute for Performance Monitoring"
::= { ubiCfmMa 3 }
ubiCfmMaPmEntry OBJECT-TYPE
SYNTAX UbiCfmMaPmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Monitoring Entry"
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex }
::= { ubiCfmMaPmTable 1 }
UbiCfmMaPmEntry ::= SEQUENCE {
ubiCfmMaPmDelayInterval Integer32,
ubiCfmMaPmLossInterval Integer32,
ubiCfmMaPmDelayThreshold Integer32,
ubiCfmMaPmLossThreshold Integer32,
}
ubiCfmMaPmDelayInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval to trasmit DM(delay measurement)message"
::= { ubiCfmMaPmEntry 1 }
ubiCfmMaPmLossInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval to trasmit LM(loss measurement)message"
::= { ubiCfmMaPmEntry 2 }
ubiCfmMaPmDelayThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Treshold to limit for delay"
::= { ubiCfmMaPmEntry 3 }
ubiCfmMaPmLossThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Treshold to limit for loss"
::= { ubiCfmMaPmEntry 4 }
-- *****************************************************************
-- ubiCfmRmepTable
-- *****************************************************************
ubiCfmRmepTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmRmepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information of Remote Mep table"
::= { ubiCfmRmep 1 }
ubiCfmRmepEntry OBJECT-TYPE
SYNTAX UbiCfmRmepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information of Remote Mep entry"
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmRmepId }
::= { ubiCfmRmepTable 1 }
UbiCfmRmepEntry ::= SEQUENCE {
ubiCfmRmepId Dot1agCfmMepId,
-- ubiCfmRmepMdLevel Dot1agCfmMDLevel,
ubiCfmRmepVlanId VlanIndex,
ubiCfmRmepRemoteMacAddr MacAddress,
ubiCfmRmepCrossCheckType INTEGER,
ubiCfmRmepStatus INTEGER,
ubiCfmRmepRowStatus RowStatus,
}
ubiCfmRmepId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maintenance association End Point Identifier of a remote MEP"
::= { ubiCfmRmepEntry 1 }
-- ubiCfmRmepMdLevel OBJECT-TYPE
-- SYNTAX Dot1agCfmMDLevel
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { ubiCfmRmepEntry 2 }
ubiCfmRmepVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Identifier of a remote MEP. Same value of local MEP(MA's VID)"
::= { ubiCfmRmepEntry 2 }
ubiCfmRmepRemoteMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address of the remote MEP."
::= { ubiCfmRmepEntry 3 }
ubiCfmRmepCrossCheckType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CrossCheck Type (uicast or multicast)."
::= { ubiCfmRmepEntry 4 }
ubiCfmRmepStatus OBJECT-TYPE
SYNTAX INTEGER {
connect(1),
disconnect(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Continuity Status to local MEP from remote MEP.
Remote MEP state machine last entered either the RMEP_FAILED
or RMEP_OK state"
::= { ubiCfmRmepEntry 5 }
ubiCfmRmepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmRmepEntry 6 }
-- *****************************************************************
-- ubiCfmMepTable
-- *****************************************************************
ubiCfmMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Maintenance Association End Point (MEP) table."
::= { ubiCfmMep 1 }
ubiCfmMepEntry OBJECT-TYPE
SYNTAX UbiCfmMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The known MEPS table entry."
INDEX { ubiBridgeId, ubiCfmMdIndex,
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
::= { ubiCfmMepTable 1 }
UbiCfmMepEntry ::= SEQUENCE {
ubiCfmMepId Dot1agCfmMepId,
ubiCfmMepMdLevel Dot1agCfmMDLevel,
ubiCfmMepVlanId VlanIndex,
ubiCfmMepActive TruthValue,
ubiCfmMepDirection INTEGER,
ubiCfmMepMdName Dot1agCfmMaintDomainName,
ubiCfmMepUniMep INTEGER,
ubiCfmMepRmepId Dot1agCfmMepId,
ubiCfmMepIfname DisplayString,
ubiCfmMepIfMacAddr MacAddress,
ubiCfmMepRdi TruthValue,
ubiCfmMepCCType INTEGER,
ubiCfmMepCCEnable INTEGER,
ubiCfmMepRowStatus RowStatus,
ubiCfmMepMissingTime Integer32,
ubiCfmMepExpiredTime Integer32,
ubiCfmMepForceEgressTag INTEGER
}
ubiCfmMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Integer that is unique among all the MEPs in the same MA.
Other definition is:
A small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.19).
MEP Identifier is also known as the MEPID."
::= { ubiCfmMepEntry 1 }
ubiCfmMepMdLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MD level that belong to this MD"
::= { ubiCfmMepEntry 2 }
ubiCfmMepVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or that the MEP's MA is associated with no VID."
::= { ubiCfmMepEntry 3 }
ubiCfmMepActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state of the MEP. A Boolean indicating the
administrative state of the MEP.
True indicates that the MEP is to function normally, and
false that it is to cease functioning."
::= { ubiCfmMepEntry 4 }
ubiCfmMepDirection OBJECT-TYPE
SYNTAX INTEGER {
down(1),
up(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction in which the MEP faces on the Bridge port."
::= { ubiCfmMepEntry 5 }
ubiCfmMepMdName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MD name that belong to this MD"
::= { ubiCfmMepEntry 6 }
ubiCfmMepUniMep OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag to configure UNI-MEP"
::= { ubiCfmMepEntry 7 }
ubiCfmMepRmepId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified RmepID that is RMEP configured"
::= { ubiCfmMepEntry 8 }
ubiCfmMepIfname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the IfIndex of the interface
where MEP configure."
::= { ubiCfmMepEntry 9 }
ubiCfmMepIfMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Thsi object is the MAC address of the interface
where MEP configure."
::= { ubiCfmMepEntry 10 }
ubiCfmMepRdi OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the RDI bit in the sending CCM (true for
RDI=1), or false."
::= { ubiCfmMepEntry 11 }
ubiCfmMepCCType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of CCM message."
::= { ubiCfmMepEntry 12 }
ubiCfmMepCCEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, the MEP will generate CCM messages."
::= { ubiCfmMepEntry 13 }
ubiCfmMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmMepEntry 14 }
ubiCfmMepMissingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pass time after received last CCM"
::= { ubiCfmMepEntry 15 }
ubiCfmMepExpiredTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remain time till Expired RMEP status"
::= { ubiCfmMepEntry 16 }
ubiCfmMepForceEgressTag OBJECT-TYPE
SYNTAX INTEGER {
egress-default(0),
egress-tagged(1),
egress-untagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UNI-MEP send CCM with VID information(tagged)
or send CCM without VID information (untagged).
If set none-value, tag information is depend on
egress interface policy"
::= { ubiCfmMepEntry 17 }
-- *****************************************************************
-- ubiCfmMepPmDelayTable
-- *****************************************************************
ubiCfmMepPmDelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMepPmDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Monitoring Table"
::= { ubiCfmMep 2 }
ubiCfmMepPmDelayEntry OBJECT-TYPE
SYNTAX UbiCfmMepPmDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Monitoring Entry"
INDEX { ubiBridgeId, ubiCfmMdIndex,
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
::= { ubiCfmMepPmDelayTable 1 }
UbiCfmMepPmDelayEntry ::= SEQUENCE {
ubiCfmMepPmDelayRmep INTEGER,
ubiCfmMepPmDelayFrameType INTEGER,
ubiCfmMepPmDelayCurrentValue Unsigned32,
ubiCfmMepPmDelayTxInterval INTEGER,
ubiCfmMepPmDelayState INTEGER,
ubiCfmMepPmDelayRowStatus RowStatus,
ubiCfmMepPmDelayMin Integer32,
ubiCfmMepPmDelayMax Integer32,
ubiCfmMepPmDelayAvg Integer32
}
ubiCfmMepPmDelayRmep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote MEP ID to measure performance "
::= { ubiCfmMepPmDelayEntry 1 }
ubiCfmMepPmDelayFrameType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of frame that is to measure"
::= { ubiCfmMepPmDelayEntry 2 }
ubiCfmMepPmDelayCurrentValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Result value of measurement"
::= { ubiCfmMepPmDelayEntry 3 }
ubiCfmMepPmDelayTxInterval OBJECT-TYPE
SYNTAX INTEGER {
tx_100m(1),
tx_1s(2),
tx_10s(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Period that operate performance monitoring"
::= { ubiCfmMepPmDelayEntry 4 }
ubiCfmMepPmDelayState OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
fail(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result state of measurement.
If ubiCfmMepPmCurrentValue is lower than threshold,
ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is
over the configured threshold, ubiCfmMepPmState is FAIL."
::= { ubiCfmMepPmDelayEntry 5 }
ubiCfmMepPmDelayRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmMepPmDelayEntry 6 }
ubiCfmMepPmDelayMin OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum delay measured by performance monitoring"
::= { ubiCfmMepPmDelayEntry 7 }
ubiCfmMepPmDelayMax OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum delay measured by performance monitoring"
::= { ubiCfmMepPmDelayEntry 8 }
ubiCfmMepPmDelayAvg OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average of delay measured by performance monitoring"
::= { ubiCfmMepPmDelayEntry 9 }
-- *****************************************************************
-- ubiCfmMepPmLossTable
-- *****************************************************************
ubiCfmMepPmLossTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmMepPmLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Monitoring Table"
::= { ubiCfmMep 3 }
ubiCfmMepPmLossEntry OBJECT-TYPE
SYNTAX UbiCfmMepPmLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Monitoring Entry"
INDEX { ubiBridgeId, ubiCfmMdIndex,
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
::= { ubiCfmMepPmLossTable 1 }
UbiCfmMepPmLossEntry ::= SEQUENCE {
ubiCfmMepPmLossRmep INTEGER,
ubiCfmMepPmLossFrameType INTEGER,
ubiCfmMepPmLossCurrentValue Unsigned32,
ubiCfmMepPmLossTxInterval INTEGER,
ubiCfmMepPmLossState INTEGER,
ubiCfmMepPmLossRowStatus RowStatus,
ubiCfmMepPmLossRttMin Integer32,
ubiCfmMepPmLossRttMax Integer32,
ubiCfmMepPmLossRttAvg Integer32,
uniCfmMepPmLossNearEndTot Integer32,
uniCfmMepPmLossFarEndTot Integer32,
}
ubiCfmMepPmLossRmep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote MEP ID to measure performance "
::= { ubiCfmMepPmLossEntry 1 }
ubiCfmMepPmLossFrameType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of frame that is to measure"
::= { ubiCfmMepPmLossEntry 2 }
ubiCfmMepPmLossCurrentValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Result value of measurement"
::= { ubiCfmMepPmLossEntry 3 }
ubiCfmMepPmLossTxInterval OBJECT-TYPE
SYNTAX INTEGER {
tx_100m(1),
tx_1s(2),
tx_10s(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Period that operate performance monitoring"
::= { ubiCfmMepPmLossEntry 4 }
ubiCfmMepPmLossState OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
fail(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result state of measurement.
If ubiCfmMepPmCurrentValue is lower than threshold,
ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is
over the configured threshold, ubiCfmMepPmState is FAIL."
::= { ubiCfmMepPmLossEntry 5 }
ubiCfmMepPmLossRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmMepPmLossEntry 6 }
uniCfmMepPmLossNearEndTot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame loss of near end measured by performance monitoring"
::= { ubiCfmMepPmLossEntry 7 }
uniCfmMepPmLossFarEndTot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame loss of far end measured by performance monitoring"
::= { ubiCfmMepPmLossEntry 8 }
ubiCfmMepPmLossRttMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum route-trip time between MEPs"
::= { ubiCfmMepPmLossEntry 9 }
ubiCfmMepPmLossRttMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum route-trip time between MEPs"
::= { ubiCfmMepPmLossEntry 10 }
ubiCfmMepPmLossRttAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average of route-trip time between MEPs"
::= { ubiCfmMepPmLossEntry 11 }
-- *****************************************************************
-- ubiCfmMep Ping/Trace Send
-- *****************************************************************
ubiCfmMepOamSendBridgeId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge ID to send Ping or Linktrace"
::= { ubiCfmMepOamSend 1 }
ubiCfmMepOamSendMdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maintenance Domain ID to send Ping or Linktrace"
::= { ubiCfmMepOamSend 2 }
ubiCfmMepOamSendMaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maintenance Association ID to send Ping or Linktrace"
::= { ubiCfmMepOamSend 3 }
ubiCfmMepOamSendMepId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP ID to send Ping or Linktrace"
::= { ubiCfmMepOamSend 4 }
ubiCfmMepOamSendDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address"
::= { ubiCfmMepOamSend 5 }
ubiCfmMepOamSendLoopbackFrameType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
unicast(1),
multicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of CFM loopback Frame (ETH-LB)"
::= { ubiCfmMepOamSend 6 }
ubiCfmMepOamSendLoopbackFrameCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Counter to transmit CFM loopback frame"
::= { ubiCfmMepOamSend 7 }
ubiCfmMepOamSendExecute OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
etherPing(1),
linkTrace(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send ping/linktrace messages"
::= { ubiCfmMepOamSend 8 }
-- *****************************************************************
-- ubiCfmMep Ping/Trace Send Result
-- *****************************************************************
ubiCfmMepOamResultEtherPing OBJECT-TYPE
SYNTAX INTEGER {
other(0),
ok(1),
fail(2),
already_activated(3),
not_ready(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The result of Loopback message sent.
If already Loopback function activate, send trap
result value on already_activated. if CC not connected or
unicast RMEP crosscheck type, send trap result value on not_ready."
::= { ubiCfmMepOamResult 1 }
ubiCfmMepOamResultEtherPingSndCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Counter of CFM loopback frame to send"
::= { ubiCfmMepOamResult 2 }
ubiCfmMepOamResultEtherPingRcvCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Received counter of CFM lopback reply"
::= { ubiCfmMepOamResult 3 }
ubiCfmMepOamResultEtherPingRttMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Minimum round-trip time measured by CFM loopback frame"
::= { ubiCfmMepOamResult 4 }
ubiCfmMepOamResultEtherPingRttMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Maximum round-trip time measured by CFM loopback frame"
::= { ubiCfmMepOamResult 5 }
ubiCfmMepOamResultEtherPingRttAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Average of round-trip time measured by CFM loopback frame"
::= { ubiCfmMepOamResult 6 }
ubiCfmMepOamResultLinkTraceSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"MAC address returned in the ingress MAC address field."
::= { ubiCfmMepOamResult 7 }
ubiCfmMepOamResultLinkTraceRcvIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The index of local interface of received LTR"
::= { ubiCfmMepOamResult 8 }
ubiCfmMepOamResultLinkTraceRelayAction OBJECT-TYPE
SYNTAX INTEGER {
other(0),
relay_hit(1),
relay_fdb(2),
already_activated(3),
not_ready(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates if a LTM was forwarded by the responding MP, as
returned in the 'relay-hit' or 'relay-fdb' flag of the
flags field. If other LT function already activate,
on already_activated value. else if CC is not OK state,
on not_ready value"
::= { ubiCfmMepOamResult 9 }
ubiCfmMepOamResultLinkTraceHopCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"hop count for a returned LTR."
::= { ubiCfmMepOamResult 10 }
-- *****************************************************************
-- ubiCfmCCConfigDefectTable
-- *****************************************************************
ubiCfmCCConfigDefectTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmCCConfigDefectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CCM config defect table"
::= { ubiCfmMep 6 }
ubiCfmCCConfigDefectEntry OBJECT-TYPE
SYNTAX UbiCfmCCConfigDefectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CCM config defect entry"
INDEX { ubiBridgeId, ubiCfmMdIndex,
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
::= { ubiCfmCCConfigDefectTable 1 }
UbiCfmCCConfigDefectEntry ::= SEQUENCE {
ubiCfmMepCCConfigDefect INTEGER,
ubiCfmMepCCConfigDefectState INTEGER
}
ubiCfmMepCCConfigDefect OBJECT-TYPE
SYNTAX INTEGER{
none(0),
unexpected_mep_id(1),
unexpected_tx_interval(2),
existed_mep_id (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Defect
0: None
1: Unexpected MEP ID
2: Unexpected Tx interval
3: Already Existed MEP"
::= { ubiCfmCCConfigDefectEntry 1 }
ubiCfmMepCCConfigDefectState OBJECT-TYPE
SYNTAX INTEGER{
defectcondition_exit(0),
defectcondition_entry(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of defect condition
0: DefectConditionExit
1: DefectConditionEntry"
::= { ubiCfmCCConfigDefectEntry 2 }
-- *****************************************************************
-- ubiCfmAisTable
-- *****************************************************************
-- ubiCfmAisTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF UbiCfmAisEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { ubiCfmAis 1 }
-- ubiCfmAisEntry OBJECT-TYPE
-- SYNTAX UbiCfmAisEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX { ubiBridgeId, ifIndex, ubiCfmMdIndex, ubiCfmMaIndex, ubiCfmMepId }
-- ::= { ubiCfmAisTable 1 }
-- UbiCfmAisEntry ::= SEQUENCE {
-- ubiCfmAisDestLevel Integer32,
-- ubiCfmAisDefectType Dot1agCfmAisDefectType,
-- ubiCfmAisType INTEGER,
-- ubiCfmAisMacAddr MacAddress,
-- ubiCfmAisRowStatus RowStatus
-- }
-- ubiCfmAisDestLevel OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " "
-- ::= { ubiCfmAisEntry 1 }
-- ubiCfmAisTxInterval OBJECT-TYPE
-- SYNTAX INTEGER (1 | 60)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " "
-- ::= { ubiCfmAisEntry 2 }
-- ubiCfmAisDefectType OBJECT-TYPE
-- SYNTAX Dot1agCfmAisDefectType
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " "
-- ::= { ubiCfmAisEntry 2 }
-- ubiCfmAisType OBJECT-TYPE
-- SYNTAX INTEGER {
-- unicast(1),
-- multicast(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " "
-- ::= { ubiCfmAisEntry 3 }
-- ubiCfmAisMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " "
-- ::= { ubiCfmAisEntry 4 }
-- ubiCfmAisRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- -- STATUS current
-- DESCRIPTION
-- "The status of the row."
-- ::= { ubiCfmAisEntry 5 }
-- *****************************************************************
-- ubiCfmServerMepTable
-- *****************************************************************
ubiCfmServerMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmServerMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Server MEP represents the compound function of the
Server layer termination function and Server/ETH adaptation
function which is used to notify the ETH layer MEPs upon
failure detection by the Server layer termination function or
Server/ETH adaptation function, where the Server layer
termination function is expected to run OAM mechanisms specific
to the Server layer.
A Server MEP needs to support ETH-AIS function, as described
in clause 7.4, where the Server/ETH adaptation function is
required to issue frames with ETH-AIS information upon detection of
defect at the Server layer by the Server layer termination
and/or adaptation function.
(ITU-T Y.1731 5.3.1)"
::= { ubiCfmServerMep 1 }
ubiCfmServerMepEntry OBJECT-TYPE
SYNTAX UbiCfmServerMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Server MEP entry"
INDEX { ubiBridgeId, ifindex }
::= { ubiCfmServerMepTable 1 }
UbiCfmServerMepEntry ::= SEQUENCE {
ubiCfmServerMepTxInterval INTEGER,
ubiCfmServerMepAisLevel Dot1agCfmMDLevel,
ubiCfmServerMepRowStatus RowStatus
}
ubiCfmServerMepTxInterval OBJECT-TYPE
SYNTAX INTEGER (1 | 60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Periodic Interval of AIS Transmission"
::= { ubiCfmServerMepEntry 1 }
ubiCfmServerMepAisLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destinaction Maintenance Domain Level of AIS"
::= { ubiCfmServerMepEntry 2 }
ubiCfmServerMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiCfmServerMepEntry 3 }
-- *****************************************************************
-- ubiCfmNotificationEnables
-- *****************************************************************
ubiCfmRemoteMepStateChangeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP state(CC state) change Notification"
DEFVAL { false }
::= { ubiCfmNotificationEnables 1 }
ubiCfmPmEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ubiCfmMepPmState change Notification"
DEFVAL { false }
::= { ubiCfmNotificationEnables 2 }
ubiCfmCCConfigDefectAlarmEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Detect CCM config Defect notification"
DEFVAL { false }
::= { ubiCfmNotificationEnables 3 }
-- ubiCfmRemoteMepStatusChangeEnabled OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { false }
-- ::= { ubiCfmNotificationEnables 1 }
-- ubiCfmAggPortRemoteMepStatusChangeEnabled OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { false }
-- ::= { ubiCfmNotificationEnables 2 }
-- ubiCfmPmFrameDelayEventEnabled OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { false }
-- ::= { ubiCfmNotificationEnables 3 }
-- ubiCfmPmFrameLossEventEnabled OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- DEFVAL { false }
-- ::= { ubiCfmNotificationEnables 4 }
-- *****************************************************************
-- ubiCfmTrack
-- *****************************************************************
ubiCfmTrackEnable OBJECT-TYPE
SYNTAX BITS {
rdi(0),
link-down(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Not use"
::= { ubiCfmTrack 1 }
ubiCfmTrackTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiCfmTrackTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Not use"
::= { ubiCfmTrack 2 }
ubiCfmTrackTargetEntry OBJECT-TYPE
SYNTAX UbiCfmTrackTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Not use"
INDEX { ifindex }
::= { ubiCfmTrackTargetTable 1 }
UbiCfmTrackTargetEntry ::= SEQUENCE {
ubiCfmTrackTargetSet INTEGER
}
ubiCfmTrackTargetSet OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Not use"
::= { ubiCfmTrackTargetEntry 1 }
-- *****************************************************************
-- ubiCfmMIBConformance
-- *****************************************************************
-- Conformance Information
ubiCfmMIBCompliances OBJECT IDENTIFIER ::= { ubiCFMMIBConformance 1 }
ubiCfmMIBGroups OBJECT IDENTIFIER ::= { ubiCFMMIBConformance 2 }
-- compliance statements
ubiVlanMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for VTP implementations."
MODULE -- this module
MANDATORY-GROUPS {
ubiCfmMaGroup
}
::= { ubiCfmMIBCompliances 1 }
-- units of conformance
ubiCfmMaGroup OBJECT-GROUP
OBJECTS {
}
STATUS current
DESCRIPTION
""
::= { ubiCfmMIBGroups 1 }
END
Reference in New Issue Copy Permalink