2561 lines
89 KiB
Plaintext
2561 lines
89 KiB
Plaintext
-- *****************************************************************
|
|
-- UBQS-CFM-MIB: Ubiquoss CFM MIB
|
|
--
|
|
-- Nov 2010, Park Hyung Eun
|
|
--
|
|
-- Copyright (c) 2010 by Ubiquoss, Corp.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
|
|
UBQS-CFM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Counter32,
|
|
IpAddress,
|
|
Gauge32,
|
|
Integer32,
|
|
Unsigned32,
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP,
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
RowStatus,
|
|
DisplayString,
|
|
TruthValue,
|
|
MacAddress,
|
|
FROM SNMPv2-TC
|
|
ubiAggId,
|
|
FROM UBQS-LAG-MIB
|
|
ifIndex,
|
|
FROM IF-MIB
|
|
ubiMgmtv2
|
|
FROM UBQS-SMI;
|
|
|
|
|
|
ubiCFMMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201011250000Z"
|
|
ORGANIZATION "Ubiquoss Corp."
|
|
CONTACT-INFO
|
|
" Ubiquoss
|
|
Customer Service
|
|
|
|
Postal: 24F Milennium B/D,
|
|
467-12, Dogok-Dong,
|
|
GangNam-Gu, Seoul 135-270
|
|
Korea
|
|
|
|
Tel: 82-2-2190-3100"
|
|
DESCRIPTION
|
|
"Connectivity Fault Management module for managing IEEE 802.1ag"
|
|
|
|
::= { ubiMgmtv2 10 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- Textual Conventions
|
|
-- *****************************************************************
|
|
|
|
VlanIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN-id of a VLAN on ISL or 802.1q trunks.
|
|
|
|
Modification of default parameters is allowed.
|
|
Implementations are allowed to restrict
|
|
the range of VLANs.
|
|
|
|
For entities support up to 1024 VLANS.
|
|
VLANs above 1000 are reserved for default VLANs and
|
|
future use. Modification of default parameters is
|
|
allowed. Creation or deletion of VLANs above 1000 is not
|
|
allowed.
|
|
|
|
For a new object which needs the vlan-id of a VLAN as
|
|
its SYNTAX, it is suggested to import VlanIndex from
|
|
Q-BRIDGE-MIB instead of importing this TC here in
|
|
ubi-VTP-MIB."
|
|
SYNTAX Integer32 (0..4095)
|
|
|
|
Dot1agCfmMaintDomainNameType2 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type (and thereby the format)
|
|
of a Dot1agCfmMaintDomainName. The value can be one of
|
|
the following:
|
|
|
|
|
|
ieeeReserved(0) Reserved for definition by IEEE 802.1
|
|
recommend to not use zero unless
|
|
absolutely needed.
|
|
none(1) No format specified, usually because
|
|
there is not (yet) a Maintenance
|
|
Domain Name. In this case, a zero
|
|
length OCTET STRING for the Domain
|
|
Name field is acceptable.
|
|
dnsLikeName(2) Domain Name like string, globally unique
|
|
text string derived from a DNS name.
|
|
macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
|
|
charString(4) RFC2579 DisplayString, except that the
|
|
character codes 0-31 (decimal) are not
|
|
used.
|
|
ieeeReserved(xx) Reserved for definition by IEEE 802.1
|
|
xx values can be [5..31] and [64..255]
|
|
ituReserved(xx) Reserved for definition by ITU-T Y.1731
|
|
xx values range from [32..63]
|
|
|
|
To support future extensions, the Dot1agCfmMaintDomainNameType
|
|
textual convention SHOULD NOT be sub-typed in object type
|
|
definitions. It MAY be sub-typed in compliance statements in
|
|
order to require only a subset of these address types for a
|
|
compliant implementation.
|
|
|
|
Implementations MUST ensure that Dot1agCfmMaintDomainNameType
|
|
objects and any dependent objects (e.g.,
|
|
Dot1agCfmMaintDomainName objects) are consistent. An
|
|
inconsistentValue error MUST be generated if an attempt to
|
|
change an Dot1agCfmMaintDomainNameType object would, for
|
|
example, lead to an undefined Dot1agCfmMaintDomainName value.
|
|
In particular,
|
|
Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs
|
|
MUST be changed together if the nameType changes.
|
|
"
|
|
REFERENCE
|
|
"21.6.5, Table 21-19"
|
|
SYNTAX INTEGER {
|
|
none (1), -- no md name
|
|
dnsLikeName (2), -- dns name
|
|
macAddressAndUint (3), -- mac addr
|
|
charString (4), -- string
|
|
itu_t (32) -- itu-t
|
|
}
|
|
|
|
Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes a generic Maintenance Domain Name.
|
|
|
|
A Dot1agCfmMaintDomainName value is always interpreted within
|
|
the context of a Dot1agCfmMaintDomainNameType value. Every
|
|
usage of the Dot1agCfmMaintDomainName textual convention is
|
|
required to specify the Dot1agCfmMaintDomainNameType object
|
|
that provides the context. It is suggested that the
|
|
Dot1agCfmMaintDomainNameType object be logically registered
|
|
before the object(s) that use the Dot1agCfmMaintDomainName
|
|
textual convention, if they appear in the same logical row.
|
|
|
|
The value of a Dot1agCfmMaintDomainName object MUST always
|
|
be consistent with the value of the associated
|
|
Dot1agCfmMaintDomainNameType object. Attempts to set
|
|
an Dot1agCfmMaintDomainName object to a value inconsistent
|
|
with the associated Dot1agCfmMaintDomainNameType MUST fail
|
|
with an inconsistentValue error.
|
|
|
|
When this textual convention is used as the syntax of an
|
|
index object, there may be issues with the limit of 128
|
|
sub-identifiers specified in SMIv2, IETF STD 58. In this
|
|
case, the object definition MUST include a 'SIZE' clause
|
|
to limit the number of potential instance sub-identifiers;
|
|
otherwise the applicable constraints MUST be stated in
|
|
the appropriate conceptual row DESCRIPTION clauses, or
|
|
in the surrounding documentation if there is no single
|
|
DESCRIPTION clause that is appropriate.
|
|
|
|
A value of none(1) in the associated
|
|
Dot1agCfmMaintDomainNameType object means that no Maintenance
|
|
Domain name is present, and the contents of the
|
|
Dot1agCfmMaintDomainName object are meaningless.
|
|
|
|
See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
|
|
TEXTUAL-CONVENTION for a discussion of the length limits on
|
|
the Maintenance Domain name and Maintenance Association name.
|
|
"
|
|
REFERENCE
|
|
"21.6.5"
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
|
|
Dot1agCfmMaintAssocNameType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type (and thereby the format)
|
|
of a Dot1agCfmMaintAssocName. The value can be one of
|
|
the following:
|
|
|
|
ieeeReserved(0) Reserved for definition by IEEE 802.1
|
|
recommend to not use zero unless
|
|
absolutely needed.
|
|
primaryVid(1) Primary VLAN ID.
|
|
12 bits represented in a 2-octet integer:
|
|
- 4 least significant bits of the first
|
|
byte contains the 4 most significant
|
|
bits of the 12 bits primary VID
|
|
- second byte contains the 8 least
|
|
significant bits of the primary VID
|
|
|
|
0 1 2 3 4 5 6 7 8
|
|
+-+-+-+-+-+-+-+-+
|
|
|0 0 0 0| (MSB) |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VID LSB |
|
|
+-+-+-+-+-+-+-+-+
|
|
|
|
charString(2) RFC2579 DisplayString, except that the
|
|
character codes 0-31 (decimal) are not
|
|
used. (1..45) octets
|
|
unsignedInt16 (3) 2-octet integer/big endian
|
|
rfc2865VpnId(4) RFC 2685 VPN ID
|
|
3 octet VPN authority Organizationally
|
|
Unique Identifier followed by 4 octet VPN
|
|
index identifying VPN according to the OUI:
|
|
|
|
0 1 2 3 4 5 6 7 8
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN OUI (MSB) |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN OUI |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN OUI (LSB) |
|
|
+-+-+-+-+-+-+-+-+
|
|
|VPN Index (MSB)|
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN Index |
|
|
+-+-+-+-+-+-+-+-+
|
|
| VPN Index |
|
|
+-+-+-+-+-+-+-+-+
|
|
|VPN Index (LSB)|
|
|
+-+-+-+-+-+-+-+-+
|
|
|
|
ieeeReserved(xx) Reserved for definition by IEEE 802.1
|
|
xx values can be [5..31] and [64..255]
|
|
ituReserved(xx) Reserved for definition by ITU-T Y.1731
|
|
xx values range from [32..63]
|
|
|
|
To support future extensions, the Dot1agCfmMaintAssocNameType
|
|
textual convention SHOULD NOT be sub-typed in object type
|
|
definitions. It MAY be sub-typed in compliance statements in
|
|
order to require only a subset of these address types for a
|
|
compliant implementation.
|
|
|
|
Implementations MUST ensure that Dot1agCfmMaintAssocNameType
|
|
objects and any dependent objects (e.g.,
|
|
Dot1agCfmMaintAssocName objects) are consistent. An
|
|
inconsistentValue error MUST be generated if an attempt to
|
|
change an Dot1agCfmMaintAssocNameType object would, for
|
|
example, lead to an undefined Dot1agCfmMaintAssocName value.
|
|
In particular,
|
|
Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs
|
|
MUST be changed together if the nameType changes.
|
|
|
|
The Maintenance Domain name and Maintenance Association name,
|
|
when put together into the CCM PDU, MUST total 48 octets or
|
|
less. If the Dot1agCfmMaintDomainNameType object contains
|
|
none(1), then the Dot1agCfmMaintAssocName object MUST be
|
|
45 octets or less in length. Otherwise, the length of
|
|
the Dot1agCfmMaintDomainName object plus the length of the
|
|
Dot1agCfmMaintAssocName object, added together, MUST total
|
|
less than or equal to 44 octets.
|
|
"
|
|
REFERENCE
|
|
"21.6.5.4, Table 21-20"
|
|
SYNTAX INTEGER {
|
|
primaryVid (1),
|
|
charString (2),
|
|
unsignedInt16 (3),
|
|
rfc2865VpnId (4)
|
|
}
|
|
|
|
Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes a generic Maintenance Association Name. It is the
|
|
part of the Maintenance Association Identifier which is
|
|
unique within the Maintenance Domain Name and is appended
|
|
to the Maintenance Domain Name to form the Maintenance
|
|
Association Identifier (MAID).
|
|
|
|
A Dot1agCfmMaintAssocName value is always interpreted within
|
|
the context of a Dot1agCfmMaintAssocNameType value. Every
|
|
usage of the Dot1agCfmMaintAssocName textual convention is
|
|
required to specify the Dot1agCfmMaintAssocNameType object
|
|
that provides the context. It is suggested that the
|
|
Dot1agCfmMaintAssocNameType object be logically registered
|
|
before the object(s) that use the Dot1agCfmMaintAssocName
|
|
textual convention, if they appear in the same logical row.
|
|
|
|
The value of a Dot1agCfmMaintAssocName object MUST
|
|
always be consistent with the value of the associated
|
|
Dot1agCfmMaintAssocNameType object. Attempts to set
|
|
an Dot1agCfmMaintAssocName object to a value inconsistent
|
|
with the associated Dot1agCfmMaintAssocNameType MUST fail
|
|
with an inconsistentValue error.
|
|
|
|
When this textual convention is used as the syntax of an
|
|
index object, there may be issues with the limit of 128
|
|
sub-identifiers specified in SMIv2, IETF STD 58. In this
|
|
case, the object definition MUST include a 'SIZE' clause
|
|
to limit the number of potential instance sub-identifiers;
|
|
otherwise the applicable constraints MUST be stated in
|
|
the appropriate conceptual row DESCRIPTION clauses, or
|
|
in the surrounding documentation if there is no single
|
|
DESCRIPTION clause that is appropriate.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
|
|
SYNTAX OCTET STRING (SIZE(1..256))
|
|
|
|
|
|
Dot1agCfmMDLevel ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer identifying the Maintenance Domain Level (MD Level).
|
|
Higher numbers correspond to higher Maintenance Domains,
|
|
those with the greatest physical reach, with the highest
|
|
values for customers' CFM PDUs. Lower numbers correspond
|
|
to lower Maintenance Domains, those with more limited
|
|
physical reach, with the lowest values for CFM PDUs
|
|
protecting single bridges or physical links.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 18.3, 21.4.1"
|
|
SYNTAX Integer32 (0..7)
|
|
|
|
Dot1agCfmMDLevelOrNone ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer identifying the Maintenance Domain Level (MD Level).
|
|
Higher numbers correspond to higher Maintenance Domains,
|
|
those with the greatest physical reach, with the highest
|
|
values for customers' CFM packets. Lower numbers correspond
|
|
to lower Maintenance Domains, those with more limited
|
|
physical reach, with the lowest values for CFM PDUs
|
|
protecting single bridges or physical links.
|
|
|
|
The value (-1) is reserved to indicate that no MA Level has
|
|
been assigned.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 18.3, 12.14.3.1.3:c"
|
|
SYNTAX Integer32 (-1 | 0..7)
|
|
|
|
Dot1agCfmMpDirection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the direction in which the Maintenance
|
|
association (MEP or MIP) faces on the bridge port:
|
|
|
|
down(1) Sends Continuity Check Messages away from the
|
|
MAC Relay Entity.
|
|
up(2) Sends Continuity Check Messages towards the
|
|
MAC Relay Entity.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.6.3.2:c"
|
|
SYNTAX INTEGER {
|
|
down (1),
|
|
up (2)
|
|
}
|
|
|
|
Dot1agCfmPortStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value from he Port Status TLV from the last CCM
|
|
received from the last MEP. It indicates the ability of the
|
|
Bridge Port on which the transmitting MEP resides to pass
|
|
ordinary data, regardless of the status of the MAC
|
|
(Table 21-10).
|
|
|
|
psNoPortStateTLV(0) Indicates either that no CCM has been
|
|
received or that no port status TLV was
|
|
present in the last CCM received.
|
|
|
|
psBlocked(1) Ordinary data cannot pass freely through
|
|
the port on which the remote MEP resides.
|
|
Value of enableRmepDefect is equal to
|
|
false.
|
|
|
|
psUp(2): Ordinary data can pass freely through
|
|
the port on which the remote MEP resides.
|
|
Value of enableRmepDefect is equal to
|
|
true.
|
|
|
|
NOTE: A 0 value is used for psNoPortStateTLV, so that
|
|
additional code points can be added in a manner
|
|
consistent with the Dot1agCfmInterfaceStatus textual
|
|
convention.
|
|
"
|
|
REFERENCE
|
|
"12.14.7.6.3:f, 20.19.3 and 21.5.4"
|
|
SYNTAX INTEGER {
|
|
psNoPortStateTLV (0),
|
|
psBlocked (1),
|
|
psUp (2)
|
|
}
|
|
|
|
Dot1agCfmInterfaceStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value from the Interface Status TLV from the
|
|
last CCM received from the last MEP. It indicates the status
|
|
of the Interface within which the MEP transmitting the CCM
|
|
is configured, or the next lower Interface in the Interface
|
|
Stack, if the MEP is not configured within an Interface.
|
|
|
|
isNoInterfaceStatusTLV(0) Indicates either that no CCM has been
|
|
received or that no interface status TLV
|
|
was present in the last CCM received.
|
|
|
|
isUp(1) The interface is ready to pass packets.
|
|
|
|
isDown(2) The interface cannot pass packets
|
|
|
|
isTesting(3) The interface is in some test mode.
|
|
|
|
isUnknown(4) The interface status cannot be determined
|
|
for some reason.
|
|
|
|
isDormant(5) The interface is not in a state to pass
|
|
packets but is in a pending state, waiting
|
|
for some external event.
|
|
|
|
isNotPresent(6) Some component of the interface is missing
|
|
|
|
isLowerLayerDown(7) The interface is down due to state of the
|
|
lower layer interfaces
|
|
|
|
NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that
|
|
these code points can be kept consistent with new code
|
|
points added to ifOperStatus in the IF-MIB.
|
|
|
|
"
|
|
REFERENCE
|
|
"12.14.7.6.3:g, 20.19.4 and 21.5.5"
|
|
SYNTAX INTEGER {
|
|
isNoInterfaceStatusTLV (0),
|
|
isUp (1),
|
|
isDown (2),
|
|
isTesting (3),
|
|
isUnknown (4),
|
|
isDormant (5),
|
|
isNotPresent (6),
|
|
isLowerLayerDown (7)
|
|
}
|
|
|
|
Dot1agCfmHighestDefectPri ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value, equal to the contents of the variable
|
|
highestDefect (20.33.9 and Table 20-1), indicating the
|
|
highest-priority defect that has been present since the MEP
|
|
Fault Notification Generator State Machine was last in the
|
|
FNG_RESET state, either:
|
|
|
|
none(0) no defects since FNG_RESET
|
|
defRDICCM(1) DefRDICCM
|
|
defMACstatus(2) DefMACstatus
|
|
defRemoteCCM(3) DefRemoteCCM
|
|
defErrorCCM(4) DefErrorCCM
|
|
defXconCCM(5) DefXconCCM
|
|
|
|
The value 0 is used for no defects so that additional higher
|
|
priority values can be added, if needed, at a later time, and
|
|
so that these values correspond with those in
|
|
Dot1agCfmLowestAlarmPri.
|
|
"
|
|
REFERENCE
|
|
"20.1.2, 12.14.7.7.2:c and 20.33.9"
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
defRDICCM (1),
|
|
defMACstatus (2),
|
|
defRemoteCCM (3),
|
|
defErrorCCM (4),
|
|
defXconCCM (5)
|
|
}
|
|
|
|
Dot1agCfmLowestAlarmPri ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer value specifying the lowest priority defect
|
|
that is allowed to generate a Fault Alarm (20.9.5), either:
|
|
|
|
allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM,
|
|
DefErrorCCM, and DefXconCCM;
|
|
macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM,
|
|
DefErrorCCM, and DefXconCCM (default);
|
|
remErrXcon(3) Only DefRemoteCCM, DefErrorCCM,
|
|
and DefXconCCM;
|
|
errXcon(4) Only DefErrorCCM and DefXconCCM;
|
|
xcon(5) Only DefXconCCM; or
|
|
noXcon(6) No defects DefXcon or lower are to be
|
|
reported;
|
|
"
|
|
REFERENCE
|
|
"12.14.7.1.3:k and 20.9.5"
|
|
SYNTAX INTEGER {
|
|
allDef (1),
|
|
macRemErrXcon (2),
|
|
remErrXcon (3),
|
|
errXcon (4),
|
|
xcon (5),
|
|
noXcon (6)
|
|
}
|
|
|
|
Dot1agCfmMepId ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier (MEPID): A small
|
|
integer, unique over a given Maintenance Association,
|
|
identifying a specific MEP.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 3.19 and 19.2.1"
|
|
SYNTAX Unsigned32 (1..8191)
|
|
|
|
Dot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier (MEPID): A small
|
|
integer, unique over a given Maintenance Association,
|
|
identifying a specific MEP.
|
|
|
|
The special value 0 is allowed to indicate special cases, for
|
|
example that no MEPID is configured.
|
|
|
|
Whenever an object is defined with this SYNTAX, then the
|
|
DESCRIPTION clause of such an object MUST specify what the
|
|
special value of 0 means.
|
|
"
|
|
REFERENCE
|
|
"19.2.1"
|
|
SYNTAX Unsigned32 (0 | 1..8191)
|
|
|
|
Dot1agCfmMhfCreation ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the Management Entity can create MHFs.
|
|
The valid values are:
|
|
|
|
defMHFnone(1) No MHFs can be created for this VID.
|
|
defMHFdefault(2) MHFs can be created on this VID on any
|
|
Bridge port through which this VID can
|
|
pass.
|
|
defMHFexplicit(3) MHFs can be created for this VID only on
|
|
Bridge ports through which this VID can
|
|
pass, and only if a MEP is created at some
|
|
lower MD Level.
|
|
defMHFdefer(4) The creation of MHFs is determined by the
|
|
corresponding Maintenance Domain variable
|
|
(dot1agCfmMaCompMhfCreation).
|
|
"
|
|
REFERENCE
|
|
"12.14.5.1.3:c and 22.2.3"
|
|
SYNTAX INTEGER {
|
|
defMHFnone (1),
|
|
defMHFdefault (2),
|
|
defMHFexplicit (3),
|
|
defMHFdefer (4)
|
|
}
|
|
|
|
Dot1agCfmIdPermission ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates what, if anything, is to be included in the Sender
|
|
ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid
|
|
values are:
|
|
|
|
sendIdNone(1) The Sender ID TLV is not to be sent.
|
|
sendIdChassis(2) The Chassis ID Length, Chassis ID
|
|
Subtype, and Chassis ID fields of the
|
|
Sender ID TLV are to be sent.
|
|
sendIdManage(3) The Management Address Length and
|
|
Management Address of the Sender ID TLV
|
|
are to be sent.
|
|
sendIdChassisManage(4) The Chassis ID Length, Chassis ID
|
|
Subtype, Chassis ID, Management Address
|
|
Length and Management Address fields are
|
|
all to be sent.
|
|
sendIdDefer(5) The contents of the Sender ID TLV are
|
|
determined by the corresponding
|
|
Maintenance Domain variable
|
|
(dot1agCfmMaCompIdPermission).
|
|
"
|
|
REFERENCE
|
|
"12.14.6.1.3:d and 21.5.3"
|
|
SYNTAX INTEGER {
|
|
sendIdNone (1),
|
|
sendIdChassis (2),
|
|
sendIdManage (3),
|
|
sendIdChassisManage (4),
|
|
sendIdDefer (5)
|
|
}
|
|
|
|
Dot1agCfmCcmInterval ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the interval at which CCMs are sent by a MEP.
|
|
The possible values are:
|
|
intervalInvalid(0) No CCMs are sent (disabled).
|
|
interval300Hz(1) CCMs are sent every 3 1/3 milliseconds
|
|
(300Hz).
|
|
interval10ms(2) CCMs are sent every 10 milliseconds.
|
|
interval100ms(3) CCMs are sent every 100 milliseconds.
|
|
interval1s(4) CCMs are sent every 1 second.
|
|
interval10s(5) CCMs are sent every 10 seconds.
|
|
interval1min(6) CCMs are sent every minute.
|
|
interval10min(7) CCMs are sent every 10 minutes.
|
|
|
|
Note: enumerations start at zero to match the 'CCM Interval
|
|
field' protocol field.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.6.1.3:e, 20.8.1 and 21.6.1.3"
|
|
SYNTAX INTEGER {
|
|
intervalInvalid (0),
|
|
interval300Hz (1),
|
|
interval10ms (2),
|
|
interval100ms (3),
|
|
interval1s (4),
|
|
interval10s (5),
|
|
interval1min (6),
|
|
interval10min (7)
|
|
}
|
|
|
|
Dot1agCfmFngState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the diferent states of the MEP Fault Notification
|
|
Generator State Machine.
|
|
|
|
fngReset(1) No defect has been present since the
|
|
dot1agCfmMepFngResetTime timer
|
|
expired, or since the state machine
|
|
was last reset.
|
|
|
|
fngDefect(2) A defect is present, but not for a
|
|
long enough time to be reported
|
|
(dot1agCfmMepFngAlarmTime).
|
|
|
|
fngReportDefect(3) A momentary state during which the
|
|
defect is reported by sending a
|
|
dot1agCfmFaultAlarm notification,
|
|
if that action is enabled.
|
|
|
|
fngDefectReported(4) A defect is present, and some defect
|
|
has been reported.
|
|
|
|
fngDefectClearing(5) No defect is present, but the
|
|
dot1agCfmMepFngResetTime timer has
|
|
not yet expired.
|
|
"
|
|
REFERENCE
|
|
"12.14.7.1.3:f and 20.35"
|
|
SYNTAX INTEGER {
|
|
fngReset (1),
|
|
fngDefect (2),
|
|
fngReportDefect (3),
|
|
fngDefectReported (4),
|
|
fngDefectClearing (5)
|
|
}
|
|
|
|
Dot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values the Relay action field can take."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and
|
|
Table 21-27"
|
|
SYNTAX INTEGER {
|
|
rlyHit (1),
|
|
rlyFdb (2),
|
|
rlyMpdb (3)
|
|
}
|
|
|
|
Dot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values returned in the ingress action field."
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and
|
|
Table 21-30
|
|
"
|
|
SYNTAX INTEGER {
|
|
ingNoTlv (0),
|
|
ingOk (1),
|
|
ingDown (2),
|
|
ingBlocked (3),
|
|
ingVid (4)
|
|
}
|
|
|
|
Dot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible values returned in the egress action field"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and
|
|
Table 21-32"
|
|
SYNTAX INTEGER {
|
|
egrNoTlv (0),
|
|
egrOK (1),
|
|
egrDown (2),
|
|
egrBlocked (3),
|
|
egrVid (4)
|
|
}
|
|
|
|
Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational state of the remote MEP state machine. This
|
|
state machine monitors the reception of valid CCMs from a
|
|
remote MEP with a specific MEPID. It uses a timer that
|
|
expires in 3.5 times the length of time indicated by the
|
|
dot1agCfmMaNetCcmInterval object.
|
|
|
|
rMepIdle(1) Momentary state during reset.
|
|
|
|
rMepStart(2) The timer has not expired since the
|
|
state machine was reset, and no valid
|
|
CCM has yet been received.
|
|
|
|
rMepFailed(3) The timer has expired, both since the
|
|
state machine was reset, and since a
|
|
valid CCM was received.
|
|
|
|
rMepOk(4) The timer has not expired since a
|
|
valid CCM was received.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.6.3:b, 20.22"
|
|
SYNTAX INTEGER {
|
|
rMepIdle (1),
|
|
rMepStart (2),
|
|
rMepFailed (3),
|
|
rMepOk (4)
|
|
}
|
|
|
|
Dot1afCfmIndexIntegerNextFree ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer which may be used as a new Index in a table.
|
|
|
|
The special value of 0 indicates that no more new entries can
|
|
be created in the relevant table.
|
|
|
|
When a MIB is used for configuration, an object with this
|
|
SYNTAX always contains a legal value (if non-zero) for an
|
|
index that is not currently used in the relevant table. The
|
|
Command Generator (Network Management Application) reads this
|
|
variable and uses the (non-zero) value read when creating a
|
|
new row with an SNMP SET. When the SET is performed, the
|
|
Command Responder (agent) MUST determine whether the value is
|
|
indeed still unused; Two Network Management Applications may
|
|
attempt to create a row (configuration entry) simultaneously
|
|
and use the same value. If it is currently unused, the SET
|
|
succeeds and the Command Responder (agent) changes the value
|
|
of this object, according to an implementation-specific
|
|
algorithm. If the value is in use, however, the SET fails.
|
|
The Network Management Application MUST then re-read this
|
|
variable to obtain a new usable value.
|
|
|
|
An OBJECT-TYPE definition using this SYNTAX MUST specify the
|
|
relevant table for which the object is providing this
|
|
functionality.
|
|
"
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
|
|
Dot1agCfmMepDefects ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A MEP can detect and report a number of defects, and multiple
|
|
defects can be present at the same time. These defects are:
|
|
|
|
bDefRDICCM(0) A remote MEP is reported the RDI bit in its
|
|
last CCM.
|
|
bDefMACstatus(1) Either some remote MEP is reporting its
|
|
Interface Status TLV as not isUp, or all remote
|
|
MEPs are reporting a Port Status TLV that
|
|
contains some value other than psUp.
|
|
bDefRemoteCCM(2) The MEP is not receiving valid CCMs from at
|
|
least one of the remote MEPs.
|
|
bDefErrorCCM(3) The MEP has received at least one invalid CCM
|
|
whose CCM Interval has not yet timed out.
|
|
bDefXconCCM(4) The MEP has received at least one CCM from
|
|
either another MAID or a lower MD Level whose
|
|
CCM Interval has not yet timed out.
|
|
"
|
|
REFERENCE
|
|
"802.1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
|
|
12.14.7.1.3:r, and 12.14.7.1.3:s."
|
|
SYNTAX BITS {
|
|
bDefRDICCM(0),
|
|
bDefMACstatus(1),
|
|
bDefRemoteCCM(2),
|
|
bDefErrorCCM(3),
|
|
bDefXconCCM(4)
|
|
}
|
|
|
|
Dot1agCfmConfigErrors ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"While making the MIP creation evaluation described in 802.1ag
|
|
clause 22.2.3, the management entity can encounter errors in
|
|
the configuration. These are possible errors that can be
|
|
encountered:
|
|
|
|
CFMleak(0) MA x is associated with a specific VID list,
|
|
one or more of the VIDs in MA x can pass through
|
|
the Bridge Port, no Down MEP is configured on
|
|
any Bridge Port for MA x, and some other MA y,
|
|
at a higher MD Level than MA x, and associated
|
|
with at least one of the VID(s) also in MA x,
|
|
does have a MEP configured on the Bridge Port.
|
|
|
|
conflictingVids(1) MA x is associated with a specific VID
|
|
list, an Up MEP is configured on MA x on the
|
|
Bridge Port, and some other MA y, associated
|
|
with at least one of the VID(s) also in MA x,
|
|
also has an Up MEP configured on some Bridge
|
|
Port.
|
|
|
|
ExcessiveLevels(2) The number of different MD Levels at
|
|
which MIPs are to be created on this port
|
|
exceeds the Bridge's capabilities (see
|
|
subclause 22.3).
|
|
|
|
OverlappedLevels(3) A MEP is created for one VID at one MD
|
|
Level, but a MEP is configured on another
|
|
VID at that MD Level or higher, exceeding
|
|
the Bridge's capabilities.
|
|
"
|
|
REFERENCE
|
|
"12.14.4.1.3:b and clauses 22.2.3 and 22.2.4"
|
|
SYNTAX BITS {
|
|
cfmLeak(0),
|
|
conflictingVids(1),
|
|
excessiveLevels(2),
|
|
overlappedLevels(3)
|
|
}
|
|
|
|
Dot1agCfmPbbComponentIdentifier
|
|
::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Provider Backbone Bridge (PBB) can comprise a number of
|
|
components, each of which can be managed in a manner
|
|
essentially equivalent to an 802.1Q bridge. In order to access
|
|
these components easily, an index is used in a number of
|
|
tables. If any two tables are indexed by
|
|
Dot1agCfmPbbComponentIdentifier, then entries in those tables
|
|
indexed by the same value of Dot1agCfmPbbComponentIdentifier
|
|
correspond to the same component.
|
|
"
|
|
REFERENCE
|
|
"12.3 l)"
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
|
|
|
|
Dot1agCfmAisDefectType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Kind of defect. It is reason why alram cuase."
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
all (1),
|
|
loc (2),
|
|
merge (3),
|
|
unExpMep (4),
|
|
unExpMegLvl (5),
|
|
unExpPeriod (6)
|
|
}
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCFMMIB
|
|
-- *****************************************************************
|
|
ubiCFMMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiCFMMIB 0 }
|
|
ubiCFMMIBObjects OBJECT IDENTIFIER ::= { ubiCFMMIB 1 }
|
|
ubiCFMMIBConformance OBJECT IDENTIFIER ::= { ubiCFMMIB 2 }
|
|
|
|
|
|
|
|
ubiCfmMd OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 1 }
|
|
ubiCfmMa OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 2 }
|
|
ubiCfmRmep OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 3 }
|
|
ubiCfmMep OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 4 }
|
|
ubiCfmServerMep OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 5 }
|
|
ubiCfmNotificationEnables OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 6 }
|
|
ubiCfmTrack OBJECT IDENTIFIER ::= { ubiCFMMIBObjects 7 }
|
|
|
|
ubiCfmMepOamSend OBJECT IDENTIFIER ::= { ubiCfmMep 4 }
|
|
ubiCfmMepOamResult OBJECT IDENTIFIER ::= { ubiCfmMep 5 }
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmNotifications
|
|
-- *****************************************************************
|
|
ubiCfmNotifications OBJECT IDENTIFIER ::= { ubiCFMMIBNotificationPrefix 0 }
|
|
|
|
ubiCfmRemoteMepStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex,
|
|
ubiCfmMdName,
|
|
ubiCfmMaName,
|
|
ubiCfmMepId,
|
|
ubiCfmRmepId,
|
|
ubiCfmRmepRemoteMacAddr,
|
|
ubiCfmRmepStatus,
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote MEP state(CC state) change Notification"
|
|
::= { ubiCfmNotifications 1 }
|
|
|
|
ubiCfmAggPortRemoteMepStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiAggId,
|
|
ifIndex,
|
|
ubiCfmMdName,
|
|
ubiCfmMaName,
|
|
ubiCfmMepId,
|
|
ubiCfmRmepId,
|
|
ubiCfmRmepRemoteMacAddr,
|
|
ubiCfmRmepStatus,
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification that Remote MEP state(CC state) on port-gruop change"
|
|
::= { ubiCfmNotifications 2 }
|
|
|
|
ubiCfmPmFrameDelayEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiCfmMepId,
|
|
ubiCfmMepIfname,
|
|
--ubiCfmMepPmCurrentValue,
|
|
ubiCfmMepPmDelayMin,
|
|
ubiCfmMepPmDelayMax,
|
|
ubiCfmMepPmDelayAvg,
|
|
ubiCfmMaPmDelayThreshold,
|
|
ubiCfmMepPmDelayState,
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To generate notification when ubiCfmMepPmCurrentValue is bigger than
|
|
ubiCfmMaPmDelayThreshold"
|
|
::= { ubiCfmNotifications 3 }
|
|
|
|
ubiCfmPmFrameLossEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiCfmMepId,
|
|
ubiCfmMepIfname,
|
|
-- ubiCfmMepPmCurrentValue,
|
|
uniCfmMepPmLossNearEndTot,
|
|
uniCfmMepPmLossFarEndTot,
|
|
ubiCfmMaPmLossThreshold,
|
|
ubiCfmMepPmLossState,
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To generate notification when ubiCfmMepPmCurrentValue is bigger than
|
|
ubiCfmMaPmLossThreshold"
|
|
::= { ubiCfmNotifications 4 }
|
|
|
|
|
|
|
|
ubiCfmMepEtherPingSendResult NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiCfmMepOamSendBridgeId,
|
|
ubiCfmMepOamSendMdIndex,
|
|
ubiCfmMepOamSendMaIndex,
|
|
ubiCfmMepOamSendMepId,
|
|
ubiCfmMepOamResultEtherPing,
|
|
ubiCfmMepOamResultEtherPingSndCount,
|
|
ubiCfmMepOamResultEtherPingRcvCount,
|
|
ubiCfmMepOamResultEtherPingRttMin,
|
|
ubiCfmMepOamResultEtherPingRttMax,
|
|
ubiCfmMepOamResultEtherPingRttAvg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- ok The Loopback Message(s)reply received
|
|
- fail The Loopback Message(s)reply don't recieved
|
|
- already active Another LBM is being transmitted
|
|
- Not ready Do not initator state machine for LBM sending "
|
|
|
|
::= { ubiCfmNotifications 5 }
|
|
|
|
ubiCfmMepLinkTraceSendResult NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiCfmMepOamSendBridgeId,
|
|
ubiCfmMepOamSendMdIndex,
|
|
ubiCfmMepOamSendMaIndex,
|
|
ubiCfmMepOamSendMepId,
|
|
ubiCfmMepOamResultLinkTraceSrcMacAddr,
|
|
ubiCfmMepOamResultLinkTraceRcvIfIndex,
|
|
ubiCfmMepOamResultLinkTraceRelayAction,
|
|
ubiCfmMepOamResultLinkTraceHopCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A LTR information about LTMs transmitted"
|
|
::= { ubiCfmNotifications 6 }
|
|
|
|
ubiCfmCCConfigDefectAlarm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiBridgeId,
|
|
ubiCfmMdName,
|
|
ubiCfmMaName,
|
|
ubiCfmMepId,
|
|
ubiCfmMepCCConfigDefect,
|
|
ubiCfmMepCCConfigDefectState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CCM defect about Config error"
|
|
::= { ubiCfmNotifications 7 }
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMdTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain table. Each row in the table
|
|
represents a different Maintenance Domain.
|
|
|
|
A Maintenance Domain is described in 802.1ag (3.22) as the
|
|
network or the part of the network for which faults in
|
|
connectivity are to be managed. The boundary of a Maintenance
|
|
Domain is defined by a set of DSAPs, each of which can become
|
|
a point of connectivity to a service instance"
|
|
::= { ubiCfmMd 1 }
|
|
|
|
ubiCfmMdEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain table entry.
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex }"
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex }
|
|
::= { ubiCfmMdTable 1 }
|
|
|
|
UbiCfmMdEntry ::= SEQUENCE {
|
|
ubiCfmMdIndex Unsigned32,
|
|
ubiCfmMdName Dot1agCfmMaintDomainName,
|
|
ubiCfmMdNameType Dot1agCfmMaintDomainNameType2,
|
|
ubiCfmMdLevel Dot1agCfmMDLevel,
|
|
ubiCfmMdMipCreation Dot1agCfmMhfCreation,
|
|
ubiCfmMdRowStatus RowStatus
|
|
}
|
|
|
|
ubiCfmMdIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Maintenance Domain table."
|
|
::= { ubiCfmMdEntry 1 }
|
|
|
|
ubiCfmMdName OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintDomainName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain name.
|
|
Each Maintenance Domain has unique name amongst all those
|
|
used or available to a service provider or operator. It
|
|
facilitates easy identification of administrative
|
|
responsibility for each Maintenance Domain."
|
|
::= { ubiCfmMdEntry 2 }
|
|
|
|
ubiCfmMdNameType OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintDomainNameType2
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type (and thereby format) of the Maintenance Domain Name.
|
|
There are two types. IEEE802.1ag type(string, address...etc)
|
|
and ITU-T Y.1731 type (itu-t)"
|
|
::= { ubiCfmMdEntry 3 }
|
|
|
|
ubiCfmMdLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMDLevel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Domain Level. (0 ~ 7 level)"
|
|
::= { ubiCfmMdEntry 4 }
|
|
|
|
ubiCfmMdMipCreation OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMhfCreation {
|
|
defMHFnone (1),
|
|
defMHFdefault (2),
|
|
defMHFexplicit (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerated value indicating whether the management entity can
|
|
create MHFs (MIP Half Function) for this Maintenance Domain.
|
|
Since, in this variable, there is no encompassing Maintenance
|
|
Domain, the value defMHFdefer is not allowed."
|
|
::= { ubiCfmMdEntry 5 }
|
|
|
|
ubiCfmMdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmMdEntry 6 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmDefaultMdTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmDefaultMdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmDefaultMdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For each bridge component, the Default MD Level Managed Object
|
|
controls MHF creation for VIDs that are not attached to a
|
|
specific Maintenance Association Managed Object, and Sender ID
|
|
TLV transmission by those MHFs.
|
|
|
|
For each Bridge Port, and for each VLAN ID whose data can
|
|
pass through that Bridge Port, an entry in this table is
|
|
used by the algorithm in subclause 22.2.3 only if there is no
|
|
entry in the Maintenance Association table defining an MA
|
|
for the same VLAN ID and MD Level as this table's entry, and
|
|
on which MA an Up MEP is defined. If there exists such an
|
|
MA, that MA's objects are used by the algorithm in
|
|
subclause 22.2.3 in place of this table entry's objects. The
|
|
agent maintains the value of ubiCfmDefaultMdRowStatus to
|
|
indicate whether this entry is overridden by an MA.
|
|
|
|
When first initialized, the agent creates this table
|
|
automatically with entries for all VLAN IDs,
|
|
with the default values specified for each object."
|
|
::= { ubiCfmMd 2 }
|
|
|
|
ubiCfmDefaultMdEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmDefaultMdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Default MD Level table entry."
|
|
INDEX { UbiBridgeId, ubiCfmDefaultMdVlanId }
|
|
::= { ubiCfmDefaultMdTable 1 }
|
|
|
|
|
|
UbiCfmDefaultMdEntry ::= SEQUENCE {
|
|
ubiCfmDefaultMdVlanId VlanIndex,
|
|
ubiCfmDefaultMdLevel Dot1agCfmMDLevel,
|
|
ubiCfmDefaultMdMipCreation Dot1agCfmMhfCreation,
|
|
ubiCfmDefaultMdRowStatus RowStatus
|
|
}
|
|
|
|
ubiCfmDefaultMdVlanId OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Primary VID of the VLAN to which this entry's objects
|
|
apply."
|
|
::= { ubiCfmDefaultMdEntry 1 }
|
|
|
|
ubiCfmDefaultMdLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMDLevel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value indicating the MD Level at which MHFs are to be
|
|
created, and Sender ID TLV transmission by those MHFs is to
|
|
be controlled, for the VLAN to which this entry's objects
|
|
apply. If this object has the value -1, the MD Level for MHF
|
|
creation for this VLAN is controlled by
|
|
ubiCfmDefaultMdLevel."
|
|
::= { ubiCfmDefaultMdEntry 2 }
|
|
|
|
ubiCfmDefaultMdMipCreation OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMhfCreation {
|
|
defMHFnone (1),
|
|
defMHFdefault (2),
|
|
defMHFexplicit (3),
|
|
defMHFdefer(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value indicating if the Management entity can create MHFs
|
|
(MIP Half Function) for this VID at this MD Level. If this
|
|
object has the value defMHFdefer, MHF creation for this VLAN
|
|
is controlled by dot1agCfmDefaultMdDefMhfCreation.
|
|
|
|
The value of this variable is meaningless if the values of
|
|
ubiCfmDefaultMdMipCreation is false."
|
|
::= { ubiCfmDefaultMdEntry 3 }
|
|
|
|
ubiCfmDefaultMdRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmDefaultMdEntry 4 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMaTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Association table. Each row in the table
|
|
represents an MA. An MA is a set of MEPs, each configured
|
|
with a single service instance."
|
|
::= { ubiCfmMa 1 }
|
|
|
|
ubiCfmMaEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MA table entry."
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex }
|
|
::= { ubiCfmMaTable 1 }
|
|
|
|
|
|
UbiCfmMaEntry ::= SEQUENCE {
|
|
ubiCfmMaIndex Unsigned32,
|
|
ubiCfmMaName Dot1agCfmMaintAssocName,
|
|
ubiCfmMaNameType Dot1agCfmMaintAssocNameType,
|
|
ubiCfmMaVlanId VlanIndex,
|
|
ubiCfmMaMipCreation Dot1agCfmMhfCreation,
|
|
ubiCfmMaRowStatus RowStatus
|
|
}
|
|
|
|
ubiCfmMaIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to the Maintenance Association table."
|
|
::= { ubiCfmMaEntry 1 }
|
|
|
|
ubiCfmMaName OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintAssocName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Short Maintenance Association name. This name MUST be unique within
|
|
a maintenance domain."
|
|
::= { ubiCfmMaEntry 2 }
|
|
|
|
ubiCfmMaNameType OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintAssocNameType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type (and thereby format) of the Maintenance Association Name."
|
|
::= { ubiCfmMaEntry 3 }
|
|
|
|
ubiCfmMaVlanId OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Primary VLAN ID with which the Maintenance Association is
|
|
associated, or 0 if the MA is not attached to any VID. "
|
|
::= { ubiCfmMaEntry 4 }
|
|
|
|
ubiCfmMaMipCreation OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMhfCreation {
|
|
defMHFnone (1),
|
|
defMHFdefault (2),
|
|
defMHFexplicit (3),
|
|
defMHFdefer(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the Management entity can create MHFs (MIP Half
|
|
Function) for this MA."
|
|
::= { ubiCfmMaEntry 5 }
|
|
|
|
ubiCfmMaRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmMaEntry 6 }
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMaTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMaAttrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMaAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Attribute table for each MA(Maintenance Association).
|
|
Such as, CCM transmission interval."
|
|
::= { ubiCfmMa 2 }
|
|
|
|
ubiCfmMaAttrEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMaAttrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An attribute entry"
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex }
|
|
::= { ubiCfmMaAttrTable 1 }
|
|
|
|
UbiCfmMaAttrEntry ::= SEQUENCE {
|
|
ubiCfmMaAttrCCInterval Integer32
|
|
}
|
|
|
|
ubiCfmMaAttrCCInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between CCM transmissions to be used by all MEPs
|
|
in the MA.
|
|
interval3ms(1) CCMs are sent every 3 1/3 milliseconds.
|
|
interval10ms(2) CCMs are sent every 10 milliseconds.
|
|
interval100ms(3) CCMs are sent every 100 milliseconds.
|
|
interval1s(4) CCMs are sent every 1 second.
|
|
interval10s(5) CCMs are sent every 10 seconds.
|
|
interval1min(6) CCMs are sent every minute.
|
|
interval10min(7) CCMs are sent every 10 minutes."
|
|
|
|
::= { ubiCfmMaAttrEntry 1 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMaPmTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMaPmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMaPmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An attribute for Performance Monitoring"
|
|
::= { ubiCfmMa 3 }
|
|
|
|
ubiCfmMaPmEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMaPmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring Entry"
|
|
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex }
|
|
::= { ubiCfmMaPmTable 1 }
|
|
|
|
UbiCfmMaPmEntry ::= SEQUENCE {
|
|
ubiCfmMaPmDelayInterval Integer32,
|
|
ubiCfmMaPmLossInterval Integer32,
|
|
ubiCfmMaPmDelayThreshold Integer32,
|
|
ubiCfmMaPmLossThreshold Integer32,
|
|
}
|
|
|
|
ubiCfmMaPmDelayInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval to trasmit DM(delay measurement)message"
|
|
::= { ubiCfmMaPmEntry 1 }
|
|
|
|
ubiCfmMaPmLossInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval to trasmit LM(loss measurement)message"
|
|
|
|
::= { ubiCfmMaPmEntry 2 }
|
|
|
|
ubiCfmMaPmDelayThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Treshold to limit for delay"
|
|
::= { ubiCfmMaPmEntry 3 }
|
|
|
|
|
|
ubiCfmMaPmLossThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Treshold to limit for loss"
|
|
::= { ubiCfmMaPmEntry 4 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmRmepTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmRmepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmRmepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information of Remote Mep table"
|
|
::= { ubiCfmRmep 1 }
|
|
|
|
ubiCfmRmepEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmRmepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information of Remote Mep entry"
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex, ubiCfmRmepId }
|
|
::= { ubiCfmRmepTable 1 }
|
|
|
|
|
|
UbiCfmRmepEntry ::= SEQUENCE {
|
|
ubiCfmRmepId Dot1agCfmMepId,
|
|
-- ubiCfmRmepMdLevel Dot1agCfmMDLevel,
|
|
ubiCfmRmepVlanId VlanIndex,
|
|
ubiCfmRmepRemoteMacAddr MacAddress,
|
|
ubiCfmRmepCrossCheckType INTEGER,
|
|
ubiCfmRmepStatus INTEGER,
|
|
ubiCfmRmepRowStatus RowStatus,
|
|
}
|
|
|
|
ubiCfmRmepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance association End Point Identifier of a remote MEP"
|
|
|
|
::= { ubiCfmRmepEntry 1 }
|
|
|
|
-- ubiCfmRmepMdLevel OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmMDLevel
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ubiCfmRmepEntry 2 }
|
|
|
|
ubiCfmRmepVlanId OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Identifier of a remote MEP. Same value of local MEP(MA's VID)"
|
|
::= { ubiCfmRmepEntry 2 }
|
|
|
|
ubiCfmRmepRemoteMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the remote MEP."
|
|
::= { ubiCfmRmepEntry 3 }
|
|
|
|
ubiCfmRmepCrossCheckType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CrossCheck Type (uicast or multicast)."
|
|
::= { ubiCfmRmepEntry 4 }
|
|
|
|
ubiCfmRmepStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
connect(1),
|
|
disconnect(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Continuity Status to local MEP from remote MEP.
|
|
Remote MEP state machine last entered either the RMEP_FAILED
|
|
or RMEP_OK state"
|
|
::= { ubiCfmRmepEntry 5 }
|
|
|
|
ubiCfmRmepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmRmepEntry 6 }
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMepTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance Association End Point (MEP) table."
|
|
::= { ubiCfmMep 1 }
|
|
|
|
ubiCfmMepEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The known MEPS table entry."
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex,
|
|
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
|
|
::= { ubiCfmMepTable 1 }
|
|
|
|
|
|
UbiCfmMepEntry ::= SEQUENCE {
|
|
ubiCfmMepId Dot1agCfmMepId,
|
|
ubiCfmMepMdLevel Dot1agCfmMDLevel,
|
|
ubiCfmMepVlanId VlanIndex,
|
|
ubiCfmMepActive TruthValue,
|
|
ubiCfmMepDirection INTEGER,
|
|
ubiCfmMepMdName Dot1agCfmMaintDomainName,
|
|
ubiCfmMepUniMep INTEGER,
|
|
ubiCfmMepRmepId Dot1agCfmMepId,
|
|
ubiCfmMepIfname DisplayString,
|
|
ubiCfmMepIfMacAddr MacAddress,
|
|
ubiCfmMepRdi TruthValue,
|
|
ubiCfmMepCCType INTEGER,
|
|
ubiCfmMepCCEnable INTEGER,
|
|
ubiCfmMepRowStatus RowStatus,
|
|
ubiCfmMepMissingTime Integer32,
|
|
ubiCfmMepExpiredTime Integer32,
|
|
ubiCfmMepForceEgressTag INTEGER
|
|
}
|
|
|
|
ubiCfmMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer that is unique among all the MEPs in the same MA.
|
|
Other definition is:
|
|
A small integer, unique over a given
|
|
Maintenance Association, identifying a specific Maintenance
|
|
association End Point (3.19).
|
|
|
|
MEP Identifier is also known as the MEPID."
|
|
::= { ubiCfmMepEntry 1 }
|
|
|
|
ubiCfmMepMdLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMDLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MD level that belong to this MD"
|
|
::= { ubiCfmMepEntry 2 }
|
|
|
|
ubiCfmMepVlanId OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer indicating the Primary VID of the MEP, always
|
|
one of the VIDs assigned to the MEP's MA. The value 0
|
|
indicates that either the Primary VID is that of the
|
|
MEP's MA, or that the MEP's MA is associated with no VID."
|
|
::= { ubiCfmMepEntry 3 }
|
|
|
|
ubiCfmMepActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administrative state of the MEP. A Boolean indicating the
|
|
administrative state of the MEP.
|
|
True indicates that the MEP is to function normally, and
|
|
false that it is to cease functioning."
|
|
::= { ubiCfmMepEntry 4 }
|
|
|
|
|
|
ubiCfmMepDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
up(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction in which the MEP faces on the Bridge port."
|
|
::= { ubiCfmMepEntry 5 }
|
|
|
|
ubiCfmMepMdName OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMaintDomainName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MD name that belong to this MD"
|
|
::= { ubiCfmMepEntry 6 }
|
|
|
|
ubiCfmMepUniMep OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag to configure UNI-MEP"
|
|
::= { ubiCfmMepEntry 7 }
|
|
|
|
|
|
ubiCfmMepRmepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The specified RmepID that is RMEP configured"
|
|
::= { ubiCfmMepEntry 8 }
|
|
|
|
ubiCfmMepIfname OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the IfIndex of the interface
|
|
where MEP configure."
|
|
::= { ubiCfmMepEntry 9 }
|
|
|
|
ubiCfmMepIfMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Thsi object is the MAC address of the interface
|
|
where MEP configure."
|
|
|
|
::= { ubiCfmMepEntry 10 }
|
|
|
|
ubiCfmMepRdi OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the RDI bit in the sending CCM (true for
|
|
RDI=1), or false."
|
|
::= { ubiCfmMepEntry 11 }
|
|
|
|
ubiCfmMepCCType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of CCM message."
|
|
::= { ubiCfmMepEntry 12 }
|
|
|
|
ubiCfmMepCCEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true, the MEP will generate CCM messages."
|
|
|
|
::= { ubiCfmMepEntry 13 }
|
|
|
|
ubiCfmMepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmMepEntry 14 }
|
|
|
|
ubiCfmMepMissingTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pass time after received last CCM"
|
|
::= { ubiCfmMepEntry 15 }
|
|
|
|
ubiCfmMepExpiredTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remain time till Expired RMEP status"
|
|
::= { ubiCfmMepEntry 16 }
|
|
|
|
ubiCfmMepForceEgressTag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
egress-default(0),
|
|
egress-tagged(1),
|
|
egress-untagged(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"UNI-MEP send CCM with VID information(tagged)
|
|
or send CCM without VID information (untagged).
|
|
If set none-value, tag information is depend on
|
|
egress interface policy"
|
|
::= { ubiCfmMepEntry 17 }
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMepPmDelayTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMepPmDelayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMepPmDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring Table"
|
|
::= { ubiCfmMep 2 }
|
|
|
|
ubiCfmMepPmDelayEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMepPmDelayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring Entry"
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex,
|
|
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
|
|
::= { ubiCfmMepPmDelayTable 1 }
|
|
|
|
|
|
UbiCfmMepPmDelayEntry ::= SEQUENCE {
|
|
ubiCfmMepPmDelayRmep INTEGER,
|
|
ubiCfmMepPmDelayFrameType INTEGER,
|
|
ubiCfmMepPmDelayCurrentValue Unsigned32,
|
|
ubiCfmMepPmDelayTxInterval INTEGER,
|
|
ubiCfmMepPmDelayState INTEGER,
|
|
ubiCfmMepPmDelayRowStatus RowStatus,
|
|
ubiCfmMepPmDelayMin Integer32,
|
|
ubiCfmMepPmDelayMax Integer32,
|
|
ubiCfmMepPmDelayAvg Integer32
|
|
}
|
|
|
|
ubiCfmMepPmDelayRmep OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote MEP ID to measure performance "
|
|
::= { ubiCfmMepPmDelayEntry 1 }
|
|
|
|
ubiCfmMepPmDelayFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of frame that is to measure"
|
|
::= { ubiCfmMepPmDelayEntry 2 }
|
|
|
|
ubiCfmMepPmDelayCurrentValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Result value of measurement"
|
|
::= { ubiCfmMepPmDelayEntry 3 }
|
|
|
|
ubiCfmMepPmDelayTxInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tx_100m(1),
|
|
tx_1s(2),
|
|
tx_10s(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Period that operate performance monitoring"
|
|
::= { ubiCfmMepPmDelayEntry 4 }
|
|
|
|
ubiCfmMepPmDelayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
fail(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Result state of measurement.
|
|
If ubiCfmMepPmCurrentValue is lower than threshold,
|
|
ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is
|
|
over the configured threshold, ubiCfmMepPmState is FAIL."
|
|
::= { ubiCfmMepPmDelayEntry 5 }
|
|
|
|
|
|
ubiCfmMepPmDelayRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmMepPmDelayEntry 6 }
|
|
|
|
ubiCfmMepPmDelayMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum delay measured by performance monitoring"
|
|
::= { ubiCfmMepPmDelayEntry 7 }
|
|
|
|
ubiCfmMepPmDelayMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum delay measured by performance monitoring"
|
|
::= { ubiCfmMepPmDelayEntry 8 }
|
|
|
|
ubiCfmMepPmDelayAvg OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of delay measured by performance monitoring"
|
|
::= { ubiCfmMepPmDelayEntry 9 }
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMepPmLossTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMepPmLossTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmMepPmLossEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring Table"
|
|
::= { ubiCfmMep 3 }
|
|
|
|
ubiCfmMepPmLossEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmMepPmLossEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Monitoring Entry"
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex,
|
|
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
|
|
::= { ubiCfmMepPmLossTable 1 }
|
|
|
|
|
|
UbiCfmMepPmLossEntry ::= SEQUENCE {
|
|
ubiCfmMepPmLossRmep INTEGER,
|
|
ubiCfmMepPmLossFrameType INTEGER,
|
|
ubiCfmMepPmLossCurrentValue Unsigned32,
|
|
ubiCfmMepPmLossTxInterval INTEGER,
|
|
ubiCfmMepPmLossState INTEGER,
|
|
ubiCfmMepPmLossRowStatus RowStatus,
|
|
ubiCfmMepPmLossRttMin Integer32,
|
|
ubiCfmMepPmLossRttMax Integer32,
|
|
ubiCfmMepPmLossRttAvg Integer32,
|
|
uniCfmMepPmLossNearEndTot Integer32,
|
|
uniCfmMepPmLossFarEndTot Integer32,
|
|
}
|
|
|
|
|
|
ubiCfmMepPmLossRmep OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote MEP ID to measure performance "
|
|
::= { ubiCfmMepPmLossEntry 1 }
|
|
|
|
ubiCfmMepPmLossFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of frame that is to measure"
|
|
::= { ubiCfmMepPmLossEntry 2 }
|
|
|
|
ubiCfmMepPmLossCurrentValue OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Result value of measurement"
|
|
::= { ubiCfmMepPmLossEntry 3 }
|
|
|
|
ubiCfmMepPmLossTxInterval OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tx_100m(1),
|
|
tx_1s(2),
|
|
tx_10s(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Period that operate performance monitoring"
|
|
::= { ubiCfmMepPmLossEntry 4 }
|
|
|
|
ubiCfmMepPmLossState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
fail(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Result state of measurement.
|
|
If ubiCfmMepPmCurrentValue is lower than threshold,
|
|
ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is
|
|
over the configured threshold, ubiCfmMepPmState is FAIL."
|
|
::= { ubiCfmMepPmLossEntry 5 }
|
|
|
|
|
|
ubiCfmMepPmLossRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmMepPmLossEntry 6 }
|
|
|
|
|
|
uniCfmMepPmLossNearEndTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame loss of near end measured by performance monitoring"
|
|
::= { ubiCfmMepPmLossEntry 7 }
|
|
|
|
uniCfmMepPmLossFarEndTot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame loss of far end measured by performance monitoring"
|
|
::= { ubiCfmMepPmLossEntry 8 }
|
|
|
|
|
|
ubiCfmMepPmLossRttMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum route-trip time between MEPs"
|
|
::= { ubiCfmMepPmLossEntry 9 }
|
|
|
|
ubiCfmMepPmLossRttMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum route-trip time between MEPs"
|
|
::= { ubiCfmMepPmLossEntry 10 }
|
|
|
|
ubiCfmMepPmLossRttAvg OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of route-trip time between MEPs"
|
|
::= { ubiCfmMepPmLossEntry 11 }
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMep Ping/Trace Send
|
|
-- *****************************************************************
|
|
|
|
ubiCfmMepOamSendBridgeId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge ID to send Ping or Linktrace"
|
|
::= { ubiCfmMepOamSend 1 }
|
|
|
|
ubiCfmMepOamSendMdIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance Domain ID to send Ping or Linktrace"
|
|
::= { ubiCfmMepOamSend 2 }
|
|
|
|
ubiCfmMepOamSendMaIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance Association ID to send Ping or Linktrace"
|
|
::= { ubiCfmMepOamSend 3 }
|
|
|
|
ubiCfmMepOamSendMepId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEP ID to send Ping or Linktrace"
|
|
::= { ubiCfmMepOamSend 4 }
|
|
|
|
ubiCfmMepOamSendDstMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC address"
|
|
::= { ubiCfmMepOamSend 5 }
|
|
|
|
ubiCfmMepOamSendLoopbackFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
unicast(1),
|
|
multicast(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of CFM loopback Frame (ETH-LB)"
|
|
::= { ubiCfmMepOamSend 6 }
|
|
|
|
ubiCfmMepOamSendLoopbackFrameCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counter to transmit CFM loopback frame"
|
|
::= { ubiCfmMepOamSend 7 }
|
|
|
|
ubiCfmMepOamSendExecute OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
etherPing(1),
|
|
linkTrace(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Send ping/linktrace messages"
|
|
::= { ubiCfmMepOamSend 8 }
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMep Ping/Trace Send Result
|
|
-- *****************************************************************
|
|
ubiCfmMepOamResultEtherPing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
ok(1),
|
|
fail(2),
|
|
already_activated(3),
|
|
not_ready(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of Loopback message sent.
|
|
If already Loopback function activate, send trap
|
|
result value on already_activated. if CC not connected or
|
|
unicast RMEP crosscheck type, send trap result value on not_ready."
|
|
|
|
::= { ubiCfmMepOamResult 1 }
|
|
|
|
ubiCfmMepOamResultEtherPingSndCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Counter of CFM loopback frame to send"
|
|
::= { ubiCfmMepOamResult 2 }
|
|
|
|
ubiCfmMepOamResultEtherPingRcvCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Received counter of CFM lopback reply"
|
|
::= { ubiCfmMepOamResult 3 }
|
|
|
|
ubiCfmMepOamResultEtherPingRttMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum round-trip time measured by CFM loopback frame"
|
|
::= { ubiCfmMepOamResult 4 }
|
|
|
|
ubiCfmMepOamResultEtherPingRttMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum round-trip time measured by CFM loopback frame"
|
|
::= { ubiCfmMepOamResult 5 }
|
|
|
|
ubiCfmMepOamResultEtherPingRttAvg OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average of round-trip time measured by CFM loopback frame"
|
|
::= { ubiCfmMepOamResult 6 }
|
|
|
|
ubiCfmMepOamResultLinkTraceSrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address returned in the ingress MAC address field."
|
|
::= { ubiCfmMepOamResult 7 }
|
|
|
|
|
|
ubiCfmMepOamResultLinkTraceRcvIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of local interface of received LTR"
|
|
::= { ubiCfmMepOamResult 8 }
|
|
|
|
ubiCfmMepOamResultLinkTraceRelayAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
relay_hit(1),
|
|
relay_fdb(2),
|
|
already_activated(3),
|
|
not_ready(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if a LTM was forwarded by the responding MP, as
|
|
returned in the 'relay-hit' or 'relay-fdb' flag of the
|
|
flags field. If other LT function already activate,
|
|
on already_activated value. else if CC is not OK state,
|
|
on not_ready value"
|
|
|
|
::= { ubiCfmMepOamResult 9 }
|
|
|
|
|
|
ubiCfmMepOamResultLinkTraceHopCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"hop count for a returned LTR."
|
|
::= { ubiCfmMepOamResult 10 }
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmCCConfigDefectTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmCCConfigDefectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmCCConfigDefectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CCM config defect table"
|
|
::= { ubiCfmMep 6 }
|
|
|
|
ubiCfmCCConfigDefectEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmCCConfigDefectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CCM config defect entry"
|
|
INDEX { ubiBridgeId, ubiCfmMdIndex,
|
|
ubiCfmMaIndex, ubiCfmMepId, ifIndex }
|
|
::= { ubiCfmCCConfigDefectTable 1 }
|
|
|
|
UbiCfmCCConfigDefectEntry ::= SEQUENCE {
|
|
ubiCfmMepCCConfigDefect INTEGER,
|
|
ubiCfmMepCCConfigDefectState INTEGER
|
|
}
|
|
|
|
ubiCfmMepCCConfigDefect OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
none(0),
|
|
unexpected_mep_id(1),
|
|
unexpected_tx_interval(2),
|
|
existed_mep_id (3)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Defect
|
|
0: None
|
|
1: Unexpected MEP ID
|
|
2: Unexpected Tx interval
|
|
3: Already Existed MEP"
|
|
::= { ubiCfmCCConfigDefectEntry 1 }
|
|
|
|
|
|
ubiCfmMepCCConfigDefectState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
defectcondition_exit(0),
|
|
defectcondition_entry(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of defect condition
|
|
0: DefectConditionExit
|
|
1: DefectConditionEntry"
|
|
::= { ubiCfmCCConfigDefectEntry 2 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmAisTable
|
|
-- *****************************************************************
|
|
|
|
-- ubiCfmAisTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF UbiCfmAisEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- ::= { ubiCfmAis 1 }
|
|
|
|
-- ubiCfmAisEntry OBJECT-TYPE
|
|
-- SYNTAX UbiCfmAisEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- INDEX { ubiBridgeId, ifIndex, ubiCfmMdIndex, ubiCfmMaIndex, ubiCfmMepId }
|
|
-- ::= { ubiCfmAisTable 1 }
|
|
|
|
|
|
-- UbiCfmAisEntry ::= SEQUENCE {
|
|
-- ubiCfmAisDestLevel Integer32,
|
|
-- ubiCfmAisDefectType Dot1agCfmAisDefectType,
|
|
-- ubiCfmAisType INTEGER,
|
|
-- ubiCfmAisMacAddr MacAddress,
|
|
-- ubiCfmAisRowStatus RowStatus
|
|
-- }
|
|
|
|
-- ubiCfmAisDestLevel OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { ubiCfmAisEntry 1 }
|
|
|
|
-- ubiCfmAisTxInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1 | 60)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { ubiCfmAisEntry 2 }
|
|
|
|
-- ubiCfmAisDefectType OBJECT-TYPE
|
|
-- SYNTAX Dot1agCfmAisDefectType
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { ubiCfmAisEntry 2 }
|
|
|
|
-- ubiCfmAisType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- unicast(1),
|
|
-- multicast(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { ubiCfmAisEntry 3 }
|
|
|
|
-- ubiCfmAisMacAddr OBJECT-TYPE
|
|
-- SYNTAX MacAddress
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " "
|
|
-- ::= { ubiCfmAisEntry 4 }
|
|
|
|
-- ubiCfmAisRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- -- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The status of the row."
|
|
-- ::= { ubiCfmAisEntry 5 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmServerMepTable
|
|
-- *****************************************************************
|
|
|
|
ubiCfmServerMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmServerMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Server MEP represents the compound function of the
|
|
Server layer termination function and Server/ETH adaptation
|
|
function which is used to notify the ETH layer MEPs upon
|
|
failure detection by the Server layer termination function or
|
|
Server/ETH adaptation function, where the Server layer
|
|
termination function is expected to run OAM mechanisms specific
|
|
to the Server layer.
|
|
|
|
A Server MEP needs to support ETH-AIS function, as described
|
|
in clause 7.4, where the Server/ETH adaptation function is
|
|
required to issue frames with ETH-AIS information upon detection of
|
|
defect at the Server layer by the Server layer termination
|
|
and/or adaptation function.
|
|
(ITU-T Y.1731 5.3.1)"
|
|
::= { ubiCfmServerMep 1 }
|
|
|
|
ubiCfmServerMepEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmServerMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Server MEP entry"
|
|
INDEX { ubiBridgeId, ifindex }
|
|
::= { ubiCfmServerMepTable 1 }
|
|
|
|
|
|
UbiCfmServerMepEntry ::= SEQUENCE {
|
|
ubiCfmServerMepTxInterval INTEGER,
|
|
ubiCfmServerMepAisLevel Dot1agCfmMDLevel,
|
|
ubiCfmServerMepRowStatus RowStatus
|
|
}
|
|
|
|
ubiCfmServerMepTxInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1 | 60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Periodic Interval of AIS Transmission"
|
|
::= { ubiCfmServerMepEntry 1 }
|
|
|
|
ubiCfmServerMepAisLevel OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMDLevel
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destinaction Maintenance Domain Level of AIS"
|
|
::= { ubiCfmServerMepEntry 2 }
|
|
|
|
ubiCfmServerMepRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row."
|
|
::= { ubiCfmServerMepEntry 3 }
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmNotificationEnables
|
|
-- *****************************************************************
|
|
|
|
ubiCfmRemoteMepStateChangeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote MEP state(CC state) change Notification"
|
|
DEFVAL { false }
|
|
::= { ubiCfmNotificationEnables 1 }
|
|
|
|
ubiCfmPmEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ubiCfmMepPmState change Notification"
|
|
DEFVAL { false }
|
|
::= { ubiCfmNotificationEnables 2 }
|
|
|
|
ubiCfmCCConfigDefectAlarmEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Detect CCM config Defect notification"
|
|
DEFVAL { false }
|
|
::= { ubiCfmNotificationEnables 3 }
|
|
|
|
|
|
-- ubiCfmRemoteMepStatusChangeEnabled OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- DEFVAL { false }
|
|
-- ::= { ubiCfmNotificationEnables 1 }
|
|
|
|
-- ubiCfmAggPortRemoteMepStatusChangeEnabled OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- DEFVAL { false }
|
|
-- ::= { ubiCfmNotificationEnables 2 }
|
|
|
|
-- ubiCfmPmFrameDelayEventEnabled OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- DEFVAL { false }
|
|
-- ::= { ubiCfmNotificationEnables 3 }
|
|
|
|
-- ubiCfmPmFrameLossEventEnabled OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- ""
|
|
-- DEFVAL { false }
|
|
-- ::= { ubiCfmNotificationEnables 4 }
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmTrack
|
|
-- *****************************************************************
|
|
|
|
ubiCfmTrackEnable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
rdi(0),
|
|
link-down(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not use"
|
|
::= { ubiCfmTrack 1 }
|
|
|
|
|
|
ubiCfmTrackTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiCfmTrackTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not use"
|
|
::= { ubiCfmTrack 2 }
|
|
|
|
ubiCfmTrackTargetEntry OBJECT-TYPE
|
|
SYNTAX UbiCfmTrackTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not use"
|
|
INDEX { ifindex }
|
|
::= { ubiCfmTrackTargetTable 1 }
|
|
|
|
|
|
UbiCfmTrackTargetEntry ::= SEQUENCE {
|
|
ubiCfmTrackTargetSet INTEGER
|
|
}
|
|
|
|
ubiCfmTrackTargetSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not use"
|
|
::= { ubiCfmTrackTargetEntry 1 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- *****************************************************************
|
|
-- ubiCfmMIBConformance
|
|
-- *****************************************************************
|
|
|
|
-- Conformance Information
|
|
ubiCfmMIBCompliances OBJECT IDENTIFIER ::= { ubiCFMMIBConformance 1 }
|
|
ubiCfmMIBGroups OBJECT IDENTIFIER ::= { ubiCFMMIBConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
ubiVlanMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for VTP implementations."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ubiCfmMaGroup
|
|
}
|
|
::= { ubiCfmMIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
ubiCfmMaGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { ubiCfmMIBGroups 1 }
|
|
END
|
|
|
|
|
|
|
|
|