david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/zyxel/ZYXEL-PRESTIGE-MIB

1339 lines
36 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- $Id: zyxel-prestige.mib version 1.00 2001/10/05
--
-- Copyright (C) 1994 - 2001 Zyxel Communications, Inc.
-- All Rights Reserved.
--
-- Stagecoach Confidential; Need to Know only.
-- Protected as an unpublished work.
--
-- The computer program listings, specifications and documentation
-- herein are the property of Stagecoach Communications, Inc. and
-- shall not be reproduced, copied, disclosed, or used in whole or
-- in part for any reason without the prior express written permission of
-- Stagecoach Communications, Inc.
-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition
ZYXEL-PRESTIGE-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, Gauge, IpAddress,
NetworkAddress, TimeTicks
FROM RFC1155-SMI
ifIndex, ipRouteDest, ipAdEntAddr, egpNeighAddr
FROM RFC1213-MIB
atportIndex
FROM APPLETALK-MIB
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
prestigeCommon
FROM ZYXEL-MIB;
-- PRESTIGE common managed objects
prestigeSystem OBJECT IDENTIFIER ::= { prestigeCommon 1 }
prestigeDynDns OBJECT IDENTIFIER ::= { prestigeCommon 2 }
prestigeLAN OBJECT IDENTIFIER ::= { prestigeCommon 3 }
prestigeStaticRoute OBJECT IDENTIFIER ::= { prestigeCommon 4 }
prestigeFilterConfig OBJECT IDENTIFIER ::= { prestigeCommon 5 }
prestigeXDSL OBJECT IDENTIFIER ::= { prestigeCommon 6 }
prestigeTraps OBJECT IDENTIFIER ::= { prestigeCommon 99 }
-- The system group
sysRasFWVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current ras firmware version, N/A means information
not available."
::= { prestigeSystem 1 }
sysHWVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current hardware version, N/A means information
not available."
::= { prestigeSystem 2 }
sysModemVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current modem code version, N/A means information
not available."
::= { prestigeSystem 3 }
sysSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Choose a descriptive name for identification purposes.
This name can be up to 30 alphanumeric characters long.
Spaces are not allowed, but dashes '-' and underscores
'_' are accepted."
::= { prestigeSystem 4 }
sysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The geographic location (up to 30 characters) of your
Prestige."
::= { prestigeSystem 5 }
sysConatctPersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name (up to 30 characters) of the person in charge
of this Prestige."
::= { prestigeSystem 6 }
sysProtocolRouteIp OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to Yes to enable IP routing. You must
enable IP routing for Internet access."
::= { prestigeSystem 7 }
sysProtocolBridge OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turn on/off bridging for protocols not supported (e.g.,
SNA) or not turned on in the previous Route fields."
::= { prestigeSystem 8 }
sysDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The domain name of the LAN. If this object is empty,
the ISP may assign a domain name via DHCP."
::= { prestigeSystem 9 }
sysReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If yes reset prestige."
::= { prestigeSystem 10 }
-- The DynDns group
-- Dynamic DNS allows you to update your current dynamic
-- IP address with one or many dynamic DNS services so
-- that any one can conatct you (in NetMeeting, CU-SeeMe,
-- etc.) or access your FTP server or Web site on your own
-- computer using a DNS-like address (e.g. myhost.dnynds.org
-- where myhost is a name of your choice) which will never
-- change instead of using your IP address that changes each
-- time you reconnect.
ddnsActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the Dynamic DNS service."
::= { prestigeDynDns 1 }
ddnsServiceProvider OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
dyndns(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The choice of your dynamic DNS client."
::= { prestigeDynDns 2 }
ddnsHost OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The domain name assigned to your prestige by
your Dyanmic DNS provider."
::= { prestigeDynDns 3 }
ddnsEmail OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Your e-mail address."
::= { prestigeDynDns 4 }
ddnsUser OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user name assigned to you."
::= { prestigeDynDns 5 }
ddnsPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..29))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The password assigned to you."
::= { prestigeDynDns 6 }
ddnsEnableWildcard OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling the wildcard feature for your host
causes *.yourhost.dyndns.org to be aliased to
the same IP address as yourhost.dyndns.org.
This feature is useful if you want to be able
to use for example www.yourhost.dyndns.org
and still reach your hostname."
::= { prestigeDynDns 7 }
-- the LAN group
lanFilter OBJECT IDENTIFIER ::= { prestigeLAN 1 }
lanDHCP OBJECT IDENTIFIER ::= { prestigeLAN 2 }
lanTcpIp OBJECT IDENTIFIER ::= { prestigeLAN 3 }
lanWireless OBJECT IDENTIFIER ::= { prestigeLAN 4 }
-- the LAN filter group
-- This group allows you to specify filter set(s) that you
-- wish to apply to the Ethernet traffic. You seldom need to
-- filter Ethernet traffic; however, the filter sets may be
-- useful to block certain packets, reduce traffic and
-- prevent security breaches.
-- If you need to define filters, please read the Filter Config Group
-- description first, then return to this group to define the filter sets.
inProtocolFilterSet OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specified the protocol filter set for
incoming ethernet traffic."
::= { lanFilter 1 }
inDeviceFilterSet OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specified the device filter set for
incoming ethernet traffic."
::= { lanFilter 2 }
outProtocolFilterSet OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specified the protocol filter set for
outgoing ethernet traffic."
::= { lanFilter 3 }
outDeviceFilterSet OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specified the device filter set for
outgoing ethernet traffic."
::= { lanFilter 4 }
-- the LAN DHCP group
-- DHCP (Dynamic Host Configuration Protocol) allows the
-- individual clients (workstations) to obtain the TCP/IP
-- configuration at start-up from a centralized DHCP server.
-- The Prestige has built-in DHCP server capability,
-- enabled by default, which means it can assign IP
-- addresses, an IP default gateway and DNS servers to
-- Windows 95, Windows NT and other systems that support
-- the DHCP client. The Prestige can also act as a surrogate
-- DHCP server where it relays IP address assignment from
-- the actual DHCP server to the clients.
-- IP Pool Setup
-- The Prestige is pre-configured with a pool of 32 IP addresses
-- starting from 192.168.1.33 to 192.168.1.64 for the client
-- machines. This leaves 31 IP addresses, 192.168.1.2 to
-- 192.168.1.32 (excluding the Prestige itself which has a
-- default IP of 192.168.1.1) for other server machines, e.g.,
-- server for mail, FTP, telnet, web, etc., that you may have.
dhcpStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- none of the following
server(2),
relay(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If it is set to Server, your Prestige can assign
IP addresses, an IP default gateway and DNS servers
to Windows 95, Windows NT and other systems that
support the DHCP client. If set to None, the DHCP
server will be disabled. If set to Relay, the
Prestige acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote
server and the clients. Enter the IP address of the
actual, remote DHCP server in the Remote DHCP
Server in this case."
::= { lanDHCP 1 }
dhcpStartIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the first of the contiguous
addresses in the IP address pool."
::= { lanDHCP 2 }
dhcpPoolSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the size, or count, of the IP
address pool."
::= { lanDHCP 3 }
dhcpPrimaryDnsServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DNS server addresses that you enter in this
object are passed to the client machines along
with the assigned IP address and subnet mask."
::= { lanDHCP 4 }
dhcpSecondaryDnsServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DNS server addresses that you enter in this
object are passed to the client machines along
with the assigned IP address and subnet mask."
::= { lanDHCP 5 }
dhcpRemoteDhcpServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If Relay is selected in the dhcpStatus pbject above,
then this object should be the IP address of the
actual, remote DHCP server."
::= { lanDHCP 6 }
-- the LAN TCP/IP group
lanIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of your Prestige in dotted decimal notation"
::= { lanTcpIp 1 }
lanIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The subnet mask specifies the network number
portion of the LAN IP address."
::= { lanTcpIp 2 }
lanIpRipDirection OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- none of the following
both(2),
in(3),
out(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RIP (Routing Information Protocol) allows a router
to exchange routing information with other routers.
This object controls the sending and receiving of
RIP packets. When set to Both, the Prestige will
broadcast its routing table periodically and
incorporate the RIP information that it receives;
when set to None, it will not send any RIP packets
and will ignore any RIP packets received."
::= { lanTcpIp 3 }
lanIpRipVersion OBJECT-TYPE
SYNTAX INTEGER {
ohter(1), -- none of the following
rip1(2),
rip2B(3),
rip2M(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object controls the format and the broadcasting
method of the RIP packets that the Prestige sends (it
recognizes both formats when receiving). RIP-1 is
universally supported; but RIP-2 carries more
information. RIP-1 is probably adequate for most
networks, unless you have a unusual network topology.
Both RIP-2B and RIP-2M sends the routing data in
RIP-2 format; the difference being that RIP-2B uses
subnet broadcasting while RIP-2M uses multicasting."
::= { lanTcpIp 4 }
lanIpMulticast OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- none of the following
igmpv1(2),
igmpv2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Prestige supports both IGMP version 1 (IGMP-v1)
and version 2 (IGMP-v2). At start up, the Prestige
queries all directly connected networks to gather
group membership. After that, the Prestige periodically
updates this information. Select None to disable IP
Multicasting."
::= { lanTcpIp 5 }
-- the Wireless LAN group
-- the Wireless LAN table
wlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LanWirelessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of ip static route entries."
::= { lanWireless 1 }
wlanEntry OBJECT-TYPE
SYNTAX LanWirelessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An wireless lan entry containing comment
object for a particular ESS."
INDEX { wlanCardID, wlanESSID}
::= { wlanTable 1 }
LanWirelessEntry ::=
SEQUENCE {
wlanEssStatus
INTEGER,
wlanCardID
INTEGER,
wlanESSID
DisplayString,
wlanHideESSID
INTEGER,
wlanChannelID
INTEGER,
wlanRTSThreshold
INTEGER,
wlanFragThreshold
INTEGER,
wlanWEPStatus
INTEGER,
wlanDefaultKey
INTEGER,
wlanWepKey1
DisplayString,
wlanWepKey2
DisplayString,
wlanWepKey3
DisplayString,
wlanWepKey4
DisplayString
}
wlanEssStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
active(2),
inactive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows you to activate/deactivate this
ESS."
::= { wlanEntry 1 }
wlanCardID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Card ID indicates the wireless lan card number."
::= { wlanEntry 2 }
wlanESSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ESSID(Extended Service Set Identification) is a
unique name to identify the Prestige in the wireless LAN.
Wireless clients associating to the Prestige must have
the same ESSID. "
::= { wlanEntry 3 }
wlanHideESSID OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Select Yes to hide the ESSID in so a station can not obtain
the ESSID through passive scanning. Select No to make the
ESSID visible so a station can obtain the ESSID through
passive scanning. "
::= { wlanEntry 4 }
wlanChannelID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The range of radio frequencies used by IEEE 802.11b wireless
devices is called a channel."
::= { wlanEntry 5 }
wlanRTSThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Select this option to enable RTS/CTS handshake. Data with its
rame size larger than this value will perform the RTS/CTS handshake.
Setting this attribute to be larger than the maximum MSDU
(MAC service data unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. "
::= { wlanEntry 6 }
wlanFragThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent."
::= { wlanEntry 7 }
wlanWEPStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disable(2),
WEP-64-bit(3),
WEP-128-bit(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WEP (Wired Equivalent Privacy) encrypts data frames before transmitting
over the wireless network. Select Disable allows all wireless computers
to communicate with the access points without any data encryption.
Select 64-bit WEP or 128-bit WEP to allow data encryption. "
::= { wlanEntry 8 }
wlanDefaultKey OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default transmit WEP key."
::= { wlanEntry 9 }
wlanWepKey1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..26))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WEP key #1 value for WEP encryption. If you chose WepKey-64-bit,
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
If you chose WepKey-128-bit, then enter 26 hexadecimal
digits ('0-9', 'AF') or 10 ASCII characters. "
::= { wlanEntry 10 }
wlanWepKey2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..26))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WEP key #2 value for WEP encryption. If you chose WepKey-64-bit,
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
If you chose WepKey-128-bit, then enter 26 hexadecimal
digits ('0-9', 'AF') or 10 ASCII characters. "
::= { wlanEntry 11 }
wlanWepKey3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..26))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WEP key #3 value for WEP encryption.If you chose WepKey-64-bit,
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
If you chose WepKey-128-bit, then enter 26 hexadecimal
digits ('0-9', 'AF') or 10 ASCII characters. "
::= { wlanEntry 12 }
wlanWepKey4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..26))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WEP key #4 value for WEP encryption. If you chose WepKey-64-bit,
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
If you chose WepKey-128-bit, then enter 26 hexadecimal
digits ('0-9', 'AF') or 10 ASCII characters. "
::= { wlanEntry 13 }
-- the static route group
-- Static routes tell the Prestige routing information that it
-- cannot learn automatically through other means. This can
-- arise in cases where RIP is disabled on the LAN or a remote
-- network is beyond the one that is directly connected to a
-- remote node. Each remote node specifies only the network to
-- which the gateway is directly connected and the Prestige
-- has no knowledge of the networks beyond it. The static
-- routes are for you to tell the Prestige about the networks
-- beyond the remote nodes.
-- the IP static route group
-- the IP static table
ipStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of ip static route entries."
::= { prestigeStaticRoute 1 }
ipStaticRouteEntry OBJECT-TYPE
SYNTAX IpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An ip static route entry containing comment object for a
particular ip static route."
INDEX { ipStaticRouteIndex }
::= { ipStaticRouteTable 1 }
IpStaticRouteEntry ::=
SEQUENCE {
ipStaticRouteIndex
INTEGER,
ipStaticRouteName
DisplayString,
ipStaticRouteActiveStatus
INTEGER,
ipStaticRouteDestIpAddr
IpAddress,
ipStaticRouteSubnetMask
IpAddress,
ipStaticRouteGatewayIpAddr
IpAddress,
ipStaticRouteMetric
INTEGER,
ipStaticRoutePirvate
INTEGER
}
ipStaticRouteIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of ip static route entry."
::= { ipStaticRouteEntry 1 }
ipStaticRouteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The descriptive name for this route. This is for
identification purpose only."
::= { ipStaticRouteEntry 2 }
ipStaticRouteActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows you to activate/deactivate this
static route."
::= { ipStaticRouteEntry 3 }
ipStaticRouteDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the IP network address of the
final destination. Routing is always based on network
number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the
ipStaticRouteSubnetMask object to force the network
number to be identical to the host ID."
::= { ipStaticRouteEntry 4 }
ipStaticRouteSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The subnet mask specifies the network number
portion of the ipStaticRouteDestIpAddr."
::= { ipStaticRouteEntry 5 }
ipStaticRouteGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The gateway is an immediate neighbor of your Prestige
that will forward the packet to the destination. On
the LAN, the gateway must be a router on the same
segment as your Prestige; over WAN, the gateway must
be the IP address of one of the remote nodes."
::= { ipStaticRouteEntry 6 }
ipStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Metric represents the 'cost' of transmission for
routing purposes. IP routing uses hop count as
the measurement of cost, with a minimum of 1 for
directly connected networks. Enter a number that
approximates the cost for this link. The number
need not be precise, but it must be between 1 and
15. In practice, 2 or 3 is usually a good number."
::= { ipStaticRouteEntry 7 }
ipStaticRoutePirvate OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter determines if the Prestige will
include the route to this remote node in its RIP
broadcasts. If set to Yes, this route is kept
private and is not included in RIP broadcast.
If No, the route to this remote node will be
propagated to other hosts through RIP broadcasts."
::= { ipStaticRouteEntry 8 }
-- the Bridge static route group
-- Similar to network layer static routes, a bridging static
-- route tells the Prestige the route to a node before a
-- connection is established.
-- the Bridge static table
bridgeStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF BridgeStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of bridge static route entries."
::= { prestigeStaticRoute 2 }
bridgeStaticRouteEntry OBJECT-TYPE
SYNTAX BridgeStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An bridge static route entry containing comment
object for a particular bridge static route."
INDEX { bridgeStaticRouteIndex }
::= { bridgeStaticRouteTable 1 }
BridgeStaticRouteEntry ::=
SEQUENCE {
bridgeStaticRouteIndex
INTEGER,
bridgeStaticRouteName
DisplayString,
bridgeStaticRouteActiveStatus
INTEGER,
bridgeStaticRouteEtherAddr
PhysAddress,
bridgeStaticRouteIpAddr
IpAddress,
bridgeStaticRouteGatewayNode
INTEGER
}
bridgeStaticRouteIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of bridge static route entry."
::= { bridgeStaticRouteEntry 1 }
bridgeStaticRouteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The descriptive name for this route. This is for
identification purpose only."
::= { bridgeStaticRouteEntry 2 }
bridgeStaticRouteActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows you to activate/deactivate this
static route."
::= { bridgeStaticRouteEntry 3 }
bridgeStaticRouteEtherAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the the MAC address of the
destination machine that you wish to bridge the
packets to."
::= { bridgeStaticRouteEntry 4 }
bridgeStaticRouteIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If available, this object specifies the IP address
of the destination machine that you wish to bridge
the packets to."
::= { bridgeStaticRouteEntry 5 }
bridgeStaticRouteGatewayNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the number of the remote node
that is the gateway of this static route."
::= { bridgeStaticRouteEntry 6 }
-- the filter config group
-- Your Prestige uses filters to decide whether or not to allow
-- passage of a packet. Data filters are divided into incoming
-- and outgoing filters, depending on the direction of the
-- packet relative to a port. These filters are further
-- subdivided into device and protocol filters.
-- the filter set table
filterSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of filter set entries. The number of
entries is 12"
::= { prestigeFilterConfig 1 }
filterSetEntry OBJECT-TYPE
SYNTAX FilterSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An filter set entry containing comment object for a
particular filter set."
INDEX { filterSetIndex }
::= { filterSetTable 1 }
FilterSetEntry ::=
SEQUENCE {
filterSetIndex
INTEGER,
filterSetComment
DisplayString
}
filterSetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of filter set."
::= { filterSetEntry 1 }
filterSetComment OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The descriptive name or comment of filter set"
::= { filterSetEntry 2 }
-- the filter rule table
filterRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of filter rule entries. The number of
entries is (number of filter set) *
(number of rule set per filter set)"
::= { prestigeFilterConfig 2 }
filterRuleEntry OBJECT-TYPE
SYNTAX FilterRuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An filter rule entry containing TCP/IP and/or generic
filter rules for a particular filter set."
INDEX { filterSetIndex, filterRuleIndex }
::= { filterRuleTable 1 }
FilterRuleEntry ::=
SEQUENCE {
filterRuleIndex
INTEGER,
filterRuleActiveStatus
INTEGER,
filterRuleType
INTEGER,
filterRuleIpProtocol
INTEGER,
filterRuleIpSourceRoute
INTEGER,
filterRuleDestIpAddr
IpAddress,
filterRuleDestIpMask
IpAddress,
filterRuleDestPort
INTEGER,
filterRuleDestPortComp
INTEGER,
filterRuleSourceIpAddr
IpAddress,
filterRuleSourceIpMask
IpAddress,
filterRuleSourcePort
INTEGER,
filterRuleSourcePortComp
INTEGER,
filterRuleTcpEstab
INTEGER,
filterRuleGenericOffset
INTEGER,
filterRuleGenericLength
INTEGER,
filterRuleGenericMask
OCTET STRING,
filterRuleGenericValue
OCTET STRING,
filterRuleMore
INTEGER,
filterRuleLog
INTEGER,
filterRuleActMatched
INTEGER,
filterRuleActNotMatched
INTEGER
}
filterRuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of rule set."
::= { filterRuleEntry 1 }
filterRuleActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object activates/deactivates the filter rule."
::= { filterRuleEntry 2 }
filterRuleType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
tcpIp(2),
generic(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"There are two types of filter rules: TCP/IP and Generic.
TCP/IP rules allow you to base the rule on the fields in
the IP and the upper layer protocol, e.g., UDP and TCP,
headers.
The purpose of generic rules is to allow you to filter
non-IP packets. For IP, it is generally easier to use the
IP rules directly. For generic rules, the Prestige treats
a packet as a byte stream as opposed to an IP packet. You
specify the portion of the packet to check with the Offset
(from 0) and the Length fields, both in bytes. The Prestige
applies the Mask (bit-wise ANDing) to the data portion
before comparing the result against the Value to determine
a match. The Mask and Value are specified in hexadecimal
numbers. Note that it takes two hexadecimal digits to
represent a byte, so if the length is 4, the value in
either field will take 8 digits, e.g., FFFFFFFF."
::= { filterRuleEntry 3 }
filterRuleIpProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, protocol refers to the upper layer
protocol, e.g., TCP is 6, UDP is 17 and ICMP is 1.
For generic filter this object is disregarded."
::= { filterRuleEntry 4 }
filterRuleIpSourceRoute OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, If Yes, the rule applies to packet
with IP source route option; else the packet must not
have source route option. The majority of IP packets
do not have source route.
For generic filter this object is disregarded."
::= { filterRuleEntry 5 }
filterRuleDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, it's the destination IP Address of
the packet you wish to filter. This object is
disregarded if it is 0.0.0.0.
For generic filter this object is disregarded."
::= { filterRuleEntry 6 }
filterRuleDestIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, it's the IP mask apply to the
Destination IP Addr.
For generic filter this object is disregarded."
::= { filterRuleEntry 7 }
filterRuleDestPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, it's the destination port of
the packets that you wish to filter.
For generic filter this object is disregarded."
::= { filterRuleEntry 8 }
filterRuleDestPortComp OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- none of the following
equal(2),
notequal(3),
less(4),
greater(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, this object select the comparison
to apply to the filterRuleDestPortComp in the packet
against the value given in filterRuleDestPortComp.
For generic filter this object is disregarded."
::= { filterRuleEntry 9 }
filterRuleSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, it's the source IP Address of
the packet you wish to filter. This object is
disregarded if it is 0.0.0.0.
For generic filter this object is disregarded."
::= { filterRuleEntry 10 }
filterRuleSourceIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, it's the IP mask apply to the
source IP Addr.
For generic filter this object is disregarded."
::= { filterRuleEntry 11 }
filterRuleSourcePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, it's the source port of the
packets that you wish to filter.
For generic filter this object is disregarded."
::= { filterRuleEntry 12 }
filterRuleSourcePortComp OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- none of the following
equal(2),
notequal(3),
less(4),
greater(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, this object select the comparison
to apply to the filterRuleSourcePort in the packet
against the value given in filterRuleSourcePort.
For generic filter this object is disregarded."
::= { filterRuleEntry 13 }
filterRuleTcpEstab OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For TCP/IP filter, this object is applicable only when
filterRuleIpProtocol is 6, TCP. If yes, the rule matches
only established TCP connections; else the rule matches
all TCP packets.
For generic filter this object is disregarded."
::= { filterRuleEntry 14 }
filterRuleGenericOffset OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For generic filter, this object is the starting byte of
the data portion in the packet that you wish to compare.
For TCP/IP filter this object is disregarded."
::= { filterRuleEntry 15 }
filterRuleGenericLength OBJECT-TYPE
SYNTAX INTEGER (0..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For generic filter, this object is byte count of the data
portion in the packet that you wish to compare.
For TCP/IP filter this object is disregarded."
::= { filterRuleEntry 16 }
filterRuleGenericMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For generic filter, this object is the Mask apply to the
data portion before comparison.
For TCP/IP filter this object is disregarded."
::= { filterRuleEntry 17 }
filterRuleGenericValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For generic filter, this object is the value to compare
with the data portion.
For TCP/IP filter this object is disregarded."
::= { filterRuleEntry 18 }
filterRuleMore OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
yes(2),
no(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If yes, a matching packet is passed to the next filter
rule before an action is taken; if no, the packet is
disposed of according to the action fields."
::= { filterRuleEntry 19 }
filterRuleLog OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- none of the following
actMatched(2),
atcNotMatch(3),
both(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"* None :
No packets will be logged.
* Action Matched :
Only packets that match the rule parameters will be logged.
* Action Not Matched :
Only packets that do not match the rule parameters
will be logged.
* Both :
All packets will be logged."
::= { filterRuleEntry 20 }
filterRuleActMatched OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
checkNextRule(2),
forward(3),
drop(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object select the action for a matching packet. If
filterRuleMore is Yes, this object is disregarded.
"
::= { filterRuleEntry 21 }
filterRuleActNotMatched OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
checkNextRule(2),
forward(3),
drop(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object select the action for a packet not matching
the rule. If filterRuleMore is Yes, this object is
disregarded."
::= { filterRuleEntry 22 }
-- Prestige common traps related managed objects
whyReboot OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Send a message to the manager that the system is going to reboot.
The variable is the reason of rebooting."
::= { prestigeTraps 1 }
-- Prestige common traps
reboot TRAP-TYPE
ENTERPRISE prestigeCommon
VARIABLES {
whyReboot
}
DESCRIPTION "Send a message to the manager that the system is going to reboot.
The variable is the reason why the system reboots."
::= 1
END
Reference in New Issue Copy Permalink