david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/accedian/ACD-FILTER-MIB

2034 lines
65 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2011, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
ACD-FILTER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
IpAddress, Unsigned32
FROM SNMPv2-SMI
DisplayString, TruthValue, MacAddress, TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
acdMibs
FROM ACCEDIAN-SMI;
acdFilter MODULE-IDENTITY
LAST-UPDATED "201110100100Z"
ORGANIZATION "Accedian Networks, Inc."
CONTACT-INFO
"Accedian Technical Assistance Center
Accedian Networks, Inc.
4878 Levy, suite 202
Saint-Laurent, Quebec Canada H4R 2P1
E-mail: support@accedian.com"
DESCRIPTION
"The Filter database for this Accedian Networks device."
REVISION "201110100100Z" -- 10 October 2011
DESCRIPTION
"Add acdSmapL2FilterTableLastChangeTid and
acdSmapIPv4FilterTableLastChangeTid.
Deprecated acdL2FilterTable and acdIPv4FilterTable tables."
REVISION "201011100100Z" -- 10 November 2010
DESCRIPTION
"Add compliance section."
REVISION "200805010100Z" -- 1 May 2008
DESCRIPTION
"Add SMAP filter tables and RowStatus in acdL2FilterTable and
acdIPv4FilterTable tables."
REVISION "200608060100Z" -- 6 Aug 2006
DESCRIPTION
"Initial version of MIB module ACD-FILTER-MIB."
::= { acdMibs 2 }
acdFilterNotifications OBJECT IDENTIFIER ::= { acdFilter 5 }
acdFilterMIBObjects OBJECT IDENTIFIER ::= { acdFilter 6 }
acdFilterConformance OBJECT IDENTIFIER ::= { acdFilter 7 }
acdFilterTableTid OBJECT IDENTIFIER ::= { acdFilterMIBObjects 1 }
---------------------------------------------------------------------------
-- Textual conventions
---------------------------------------------------------------------------
AcdFilterOperator ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operator for field comparaison. Valid operator types are:
Greater than, Less than, Equal to or Range (inclusive range)."
SYNTAX INTEGER {
lessThan(1),
greaterThan(2),
equalTo(3),
range(4)
}
AcdFilterVlanType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"."
SYNTAX INTEGER {
cvlan(1),
svlan(2),
both(3)
}
---------------------------------------------------------------------------
-- The L2 table
-- This table contains all Layer 2 Filters.
---------------------------------------------------------------------------
acdL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdL2FilterEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of all Layer 2 filters"
::= { acdFilter 1 }
acdL2FilterEntry OBJECT-TYPE
SYNTAX AcdL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Filter is a pattern matching a definition against packets."
INDEX { acdL2FilterID }
::= { acdL2FilterTable 1 }
AcdL2FilterEntry ::= SEQUENCE {
acdL2FilterID Unsigned32,
acdL2FilterName DisplayString,
acdL2FilterMacDstEn TruthValue,
acdL2FilterMacDst MacAddress,
acdL2FilterMacDstMask Unsigned32,
acdL2FilterMacSrcEn TruthValue,
acdL2FilterMacSrc MacAddress,
acdL2FilterMacSrcMask Unsigned32,
acdL2FilterEtypeEn TruthValue,
acdL2FilterEtype Unsigned32,
acdL2FilterVlan1PriorEn TruthValue,
acdL2FilterVlan1Prior Unsigned32,
acdL2FilterVlan1CfiEn TruthValue,
acdL2FilterVlan1Cfi Unsigned32,
acdL2FilterVlan1IdEn TruthValue,
acdL2FilterVlan1Id Unsigned32,
acdL2FilterVlan2PriorEn TruthValue,
acdL2FilterVlan2Prior Unsigned32,
acdL2FilterVlan2CfiEn TruthValue,
acdL2FilterVlan2Cfi Unsigned32,
acdL2FilterVlan2IdEn TruthValue,
acdL2FilterVlan2Id Unsigned32,
acdL2FilterRowStatus RowStatus
}
acdL2FilterID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform."
::= { acdL2FilterEntry 1 }
acdL2FilterName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a string to identify the filter."
::= { acdL2FilterEntry 2 }
acdL2FilterMacDstEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the destination MAC address check."
DEFVAL { false }
::= { acdL2FilterEntry 3 }
acdL2FilterMacDst OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination MAC address used to compare the incoming traffic."
DEFVAL { '000000000000'H }
::= { acdL2FilterEntry 4 }
acdL2FilterMacDstMask OBJECT-TYPE
SYNTAX Unsigned32 (0..48)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of destination MAC address bits to compare. Its value ranges
from 0 to 48. Only specific mask are valid per platform."
DEFVAL { 48 }
::= { acdL2FilterEntry 5 }
acdL2FilterMacSrcEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the source MAC address check."
DEFVAL { false }
::= { acdL2FilterEntry 6 }
acdL2FilterMacSrc OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source MAC address used to compare the incoming traffic."
DEFVAL { '000000000000'H }
::= { acdL2FilterEntry 7 }
acdL2FilterMacSrcMask OBJECT-TYPE
SYNTAX Unsigned32 (0..48)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of source MAC address bits to compare. Its value ranges
from 0 to 48. Only specific mask are valid per platform."
DEFVAL { 48 }
::= { acdL2FilterEntry 8 }
acdL2FilterEtypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Ethernet type check."
DEFVAL { false }
::= { acdL2FilterEntry 9 }
acdL2FilterEtype OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Ethernet type used to compare the incoming traffic."
DEFVAL { 0 }
::= { acdL2FilterEntry 10 }
acdL2FilterVlan1PriorEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN priority check."
DEFVAL { false }
::= { acdL2FilterEntry 11 }
acdL2FilterVlan1Prior OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdL2FilterEntry 12 }
acdL2FilterVlan1CfiEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN CFI check."
DEFVAL { false }
::= { acdL2FilterEntry 13 }
acdL2FilterVlan1Cfi OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1."
DEFVAL { 0 }
::= { acdL2FilterEntry 14 }
acdL2FilterVlan1IdEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN ID check."
DEFVAL { false }
::= { acdL2FilterEntry 15 }
acdL2FilterVlan1Id OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdL2FilterEntry 16 }
acdL2FilterVlan2PriorEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN priority check."
DEFVAL { false }
::= { acdL2FilterEntry 17 }
acdL2FilterVlan2Prior OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdL2FilterEntry 18 }
acdL2FilterVlan2CfiEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN CFI check."
DEFVAL { false }
::= { acdL2FilterEntry 19 }
acdL2FilterVlan2Cfi OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1."
DEFVAL { 0 }
::= { acdL2FilterEntry 20 }
acdL2FilterVlan2IdEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN ID check."
DEFVAL { false }
::= { acdL2FilterEntry 21 }
acdL2FilterVlan2Id OBJECT-TYPE
SYNTAX Unsigned32 (0..4065)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdL2FilterEntry 22 }
acdL2FilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need to set the RowStatus to destroy."
::= { acdL2FilterEntry 23 }
---------------------------------------------------------------------------
-- The IPv4 table
-- This table contains all IPv4 Filters.
---------------------------------------------------------------------------
acdIPv4FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdIPv4FilterEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of all IPv4 filters"
::= { acdFilter 2 }
acdIPv4FilterEntry OBJECT-TYPE
SYNTAX AcdIPv4FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Filter is a pattern matching a definition against packets."
INDEX { acdIPv4FilterID }
::= { acdIPv4FilterTable 1 }
AcdIPv4FilterEntry ::= SEQUENCE {
acdIPv4FilterID Unsigned32,
acdIPv4FilterName DisplayString,
acdIPv4FilterSrcEn TruthValue,
acdIPv4FilterSrc IpAddress,
acdIPv4FilterSrcMask IpAddress,
acdIPv4FilterDstEn TruthValue,
acdIPv4FilterDst IpAddress,
acdIPv4FilterDstMask IpAddress,
acdIPv4FilterProtoEn TruthValue,
acdIPv4FilterProto Unsigned32,
acdIPv4FilterTTLEn TruthValue,
acdIPv4FilterTTL Unsigned32,
acdIPv4FilterIHLEn TruthValue,
acdIPv4FilterIHL Unsigned32,
acdIPv4FilterDscpEn TruthValue,
acdIPv4FilterDscp Unsigned32,
acdIPv4FilterECNEn TruthValue,
acdIPv4FilterECN Unsigned32,
acdIPv4FilterSrcPortEn TruthValue,
acdIPv4FilterSrcPort Unsigned32,
acdIPv4FilterDstPortEn TruthValue,
acdIPv4FilterDstPort Unsigned32,
acdIPv4FilterIcmpTypeEn TruthValue,
acdIPv4FilterIcmpType Unsigned32,
acdIPv4FilterIcmpCodeEn TruthValue,
acdIPv4FilterIcmpCode Unsigned32,
acdIPv4FilterRowStatus RowStatus
}
acdIPv4FilterID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform."
::= { acdIPv4FilterEntry 1 }
acdIPv4FilterName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a string to identify the filter."
::= { acdIPv4FilterEntry 2 }
acdIPv4FilterSrcEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Source IP address check."
DEFVAL { false }
::= { acdIPv4FilterEntry 3 }
acdIPv4FilterSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address used to compare the incoming traffic."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { acdIPv4FilterEntry 4 }
acdIPv4FilterSrcMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address mask used to compare the incoming traffic."
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
::= { acdIPv4FilterEntry 5 }
acdIPv4FilterDstEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Destination IP address check."
DEFVAL { false }
::= { acdIPv4FilterEntry 6 }
acdIPv4FilterDst OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address used to compare the incoming traffic."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { acdIPv4FilterEntry 7 }
acdIPv4FilterDstMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address mask used to compare the incoming
traffic."
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
::= { acdIPv4FilterEntry 8 }
acdIPv4FilterProtoEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the IP protocol check."
DEFVAL { false }
::= { acdIPv4FilterEntry 9 }
acdIPv4FilterProto OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP protocol used to compare the incoming traffic. Its value
ranges from 0 to 255."
DEFVAL { 1 }
::= { acdIPv4FilterEntry 10 }
acdIPv4FilterTTLEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the TTL check."
DEFVAL { false }
::= { acdIPv4FilterEntry 11 }
acdIPv4FilterTTL OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TTL used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 255 }
::= { acdIPv4FilterEntry 12 }
acdIPv4FilterIHLEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the IP Header Length check."
DEFVAL { false }
::= { acdIPv4FilterEntry 13 }
acdIPv4FilterIHL OBJECT-TYPE
SYNTAX Unsigned32 (5..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Header Length used to compare the incoming traffic.
Its value ranges from 5 to 15."
DEFVAL { 5 }
::= { acdIPv4FilterEntry 14 }
acdIPv4FilterDscpEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the DSCP (Diff-Serv Code Point) check."
DEFVAL { false }
::= { acdIPv4FilterEntry 15 }
acdIPv4FilterDscp OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63."
DEFVAL { 0 }
::= { acdIPv4FilterEntry 16 }
acdIPv4FilterECNEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the ECN (Explicite Cogestion Notification) check."
DEFVAL { false }
::= { acdIPv4FilterEntry 17 }
acdIPv4FilterECN OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ECN value used to compare the incoming traffic.
Its value ranges from 0 to 3."
DEFVAL { 0 }
::= { acdIPv4FilterEntry 18 }
acdIPv4FilterSrcPortEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the UDP/TCP Source port check."
DEFVAL { false }
::= { acdIPv4FilterEntry 19 }
acdIPv4FilterSrcPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP/TCP Source Port used to compare the incoming traffic.
Its value ranges from 0 to 65535."
DEFVAL { 0 }
::= { acdIPv4FilterEntry 20 }
acdIPv4FilterDstPortEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the UDP/TCP Destination port check."
DEFVAL { false }
::= { acdIPv4FilterEntry 21 }
acdIPv4FilterDstPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP/TCP Destination Port used to compare the incoming traffic.
Its value ranges from 0 to 65535."
DEFVAL { 0 }
::= { acdIPv4FilterEntry 22 }
acdIPv4FilterIcmpTypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the ICMP type check."
DEFVAL { false }
::= { acdIPv4FilterEntry 23 }
acdIPv4FilterIcmpType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ICMP type used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 0 }
::= { acdIPv4FilterEntry 24 }
acdIPv4FilterIcmpCodeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the ICMP code check."
DEFVAL { false }
::= { acdIPv4FilterEntry 25 }
acdIPv4FilterIcmpCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ICMP code used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 0 }
::= { acdIPv4FilterEntry 26 }
acdIPv4FilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need to set the RowStatus to destroy."
::= { acdIPv4FilterEntry 27 }
-----------------------------------------------------------------------
-- The service mapping (SMAP) L2 table
-- This table contains all SMAP Layer 2 Filters.
---------------------------------------------------------------------------
acdSmapL2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSmapL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all service mapping (SMAP) Layer 2 filters"
::= { acdFilter 3 }
acdSmapL2FilterEntry OBJECT-TYPE
SYNTAX AcdSmapL2FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Filter is a pattern matching a definition against packets."
INDEX { acdSmapL2FilterID }
::= { acdSmapL2FilterTable 1 }
AcdSmapL2FilterEntry ::= SEQUENCE {
acdSmapL2FilterID Unsigned32,
acdSmapL2FilterName DisplayString,
acdSmapL2FilterRowStatus RowStatus,
acdSmapL2FilterVlan1PriorEn TruthValue,
acdSmapL2FilterVlan1Prior Unsigned32,
acdSmapL2FilterVlan1PriorLast Unsigned32,
acdSmapL2FilterVlan1PriorOper AcdFilterOperator,
acdSmapL2FilterVlan1IdEn TruthValue,
acdSmapL2FilterVlan1Id Unsigned32,
acdSmapL2FilterVlan1IdLast Unsigned32,
acdSmapL2FilterVlan1IdOper AcdFilterOperator,
acdSmapL2FilterVlan1CfiEn TruthValue,
acdSmapL2FilterVlan1Cfi Unsigned32,
acdSmapL2FilterVlan1TypeEn TruthValue,
acdSmapL2FilterVlan1Type AcdFilterVlanType,
acdSmapL2FilterVlan2PriorEn TruthValue,
acdSmapL2FilterVlan2Prior Unsigned32,
acdSmapL2FilterVlan2PriorLast Unsigned32,
acdSmapL2FilterVlan2PriorOper AcdFilterOperator,
acdSmapL2FilterVlan2IdEn TruthValue,
acdSmapL2FilterVlan2Id Unsigned32,
acdSmapL2FilterVlan2IdLast Unsigned32,
acdSmapL2FilterVlan2IdOper AcdFilterOperator,
acdSmapL2FilterVlan2CfiEn TruthValue,
acdSmapL2FilterVlan2Cfi Unsigned32,
acdSmapL2FilterVlan2TypeEn TruthValue,
acdSmapL2FilterVlan2Type AcdFilterVlanType,
acdSmapL2FilterMacDstEn TruthValue,
acdSmapL2FilterMacDst MacAddress,
acdSmapL2FilterMacDstMask Unsigned32,
acdSmapL2FilterMacSrcEn TruthValue,
acdSmapL2FilterMacSrc MacAddress,
acdSmapL2FilterMacSrcMask Unsigned32,
acdSmapL2FilterEtypeEn TruthValue,
acdSmapL2FilterEtype Unsigned32,
acdSmapL2FilterIpCosEn TruthValue,
acdSmapL2FilterIpCosMode INTEGER,
acdSmapL2FilterDscp Unsigned32,
acdSmapL2FilterDscpLast Unsigned32,
acdSmapL2FilterDscpOper AcdFilterOperator,
acdSmapL2FilterPre Unsigned32,
acdSmapL2FilterPreLast Unsigned32,
acdSmapL2FilterPreOper AcdFilterOperator
}
acdSmapL2FilterID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform."
::= { acdSmapL2FilterEntry 1 }
acdSmapL2FilterName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a string to identify the filter."
::= { acdSmapL2FilterEntry 2 }
acdSmapL2FilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need to set the RowStatus to destroy."
::= { acdSmapL2FilterEntry 3 }
acdSmapL2FilterVlan1PriorEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN priority check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 4 }
acdSmapL2FilterVlan1Prior OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 5 }
acdSmapL2FilterVlan1PriorLast OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN priority last value, used in range operation.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 6 }
acdSmapL2FilterVlan1PriorOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN Priority operator. Valid operator types are:
Greater than, Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapL2FilterEntry 7 }
acdSmapL2FilterVlan1IdEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN ID check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 8 }
acdSmapL2FilterVlan1Id OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 9 }
acdSmapL2FilterVlan1IdLast OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 10 }
acdSmapL2FilterVlan1IdOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapL2FilterEntry 11 }
acdSmapL2FilterVlan1CfiEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN CFI check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 12 }
acdSmapL2FilterVlan1Cfi OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 13 }
acdSmapL2FilterVlan1TypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN Ethertype check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 14 }
acdSmapL2FilterVlan1Type OBJECT-TYPE
SYNTAX AcdFilterVlanType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Ethernet type."
DEFVAL { cvlan }
::= { acdSmapL2FilterEntry 15 }
acdSmapL2FilterVlan2PriorEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN priority check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 16 }
acdSmapL2FilterVlan2Prior OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 17 }
acdSmapL2FilterVlan2PriorLast OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Second VLAN priority last value, used in range operation.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 18 }
acdSmapL2FilterVlan2PriorOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapL2FilterEntry 19 }
acdSmapL2FilterVlan2IdEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN ID check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 20 }
acdSmapL2FilterVlan2Id OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 21 }
acdSmapL2FilterVlan2IdLast OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Second VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 22 }
acdSmapL2FilterVlan2IdOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Second VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapL2FilterEntry 23 }
acdSmapL2FilterVlan2CfiEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN CFI check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 24 }
acdSmapL2FilterVlan2Cfi OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 25 }
acdSmapL2FilterVlan2TypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN Ethertype check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 26 }
acdSmapL2FilterVlan2Type OBJECT-TYPE
SYNTAX AcdFilterVlanType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Ethernet type."
DEFVAL { cvlan }
::= { acdSmapL2FilterEntry 27 }
acdSmapL2FilterMacDstEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the destination MAC address check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 28 }
acdSmapL2FilterMacDst OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination MAC address used to compare the incoming traffic."
DEFVAL { '000000000000'H }
::= { acdSmapL2FilterEntry 29 }
acdSmapL2FilterMacDstMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of destination MAC address bits to compare. Its value ranges
from 0 to 48."
DEFVAL { 48 }
::= { acdSmapL2FilterEntry 30 }
acdSmapL2FilterMacSrcEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the source MAC address check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 31 }
acdSmapL2FilterMacSrc OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source MAC address used to compare the incoming traffic."
DEFVAL { '000000000000'H }
::= { acdSmapL2FilterEntry 32 }
acdSmapL2FilterMacSrcMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of source MAC address bits to compare. Its value ranges
from 0 to 48."
DEFVAL { 48 }
::= { acdSmapL2FilterEntry 33 }
acdSmapL2FilterEtypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Ethernet type check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 34 }
acdSmapL2FilterEtype OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Ethernet type used to compare the incoming traffic."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 35 }
acdSmapL2FilterIpCosEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Ethernet type check."
DEFVAL { false }
::= { acdSmapL2FilterEntry 36 }
acdSmapL2FilterIpCosMode OBJECT-TYPE
SYNTAX INTEGER {
dscp(1),
pre(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range)."
DEFVAL { dscp }
::= { acdSmapL2FilterEntry 37 }
acdSmapL2FilterDscp OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 38 }
acdSmapL2FilterDscpLast OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The last DSCP value, used in range operation.
Its value ranges from 0 to 63."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 39 }
acdSmapL2FilterDscpOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DSCP operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapL2FilterEntry 40 }
acdSmapL2FilterPre OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 41 }
acdSmapL2FilterPreLast OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The last Precedence value, used in range operation.
Its value ranges from 0 to 3."
DEFVAL { 0 }
::= { acdSmapL2FilterEntry 42 }
acdSmapL2FilterPreOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Precedence operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapL2FilterEntry 43 }
---------------------------------------------------------------------------
-- The Extended IPv4 table
-- This table contains all IPv4 Filters.
---------------------------------------------------------------------------
acdSmapIPv4FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSmapIPv4FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all Extended IPv4 filters"
::= { acdFilter 4 }
acdSmapIPv4FilterEntry OBJECT-TYPE
SYNTAX AcdSmapIPv4FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Filter is a pattern matching a definition against packets."
INDEX { acdSmapIPv4FilterID }
::= { acdSmapIPv4FilterTable 1 }
AcdSmapIPv4FilterEntry ::= SEQUENCE {
acdSmapIPv4FilterID Unsigned32,
acdSmapIPv4FilterName DisplayString,
acdSmapIPv4FilterRowStatus RowStatus,
acdSmapIPv4FilterVlan1PriorEn TruthValue,
acdSmapIPv4FilterVlan1Prior Unsigned32,
acdSmapIPv4FilterVlan1PriorLast Unsigned32,
acdSmapIPv4FilterVlan1PriorOper AcdFilterOperator,
acdSmapIPv4FilterVlan1IdEn TruthValue,
acdSmapIPv4FilterVlan1Id Unsigned32,
acdSmapIPv4FilterVlan1IdLast Unsigned32,
acdSmapIPv4FilterVlan1IdOper AcdFilterOperator,
acdSmapIPv4FilterVlan1CfiEn TruthValue,
acdSmapIPv4FilterVlan1Cfi Unsigned32,
acdSmapIPv4FilterVlan1TypeEn TruthValue,
acdSmapIPv4FilterVlan1Type AcdFilterVlanType,
acdSmapIPv4FilterVlan2PriorEn TruthValue,
acdSmapIPv4FilterVlan2Prior Unsigned32,
acdSmapIPv4FilterVlan2PriorLast Unsigned32,
acdSmapIPv4FilterVlan2PriorOper AcdFilterOperator,
acdSmapIPv4FilterVlan2IdEn TruthValue,
acdSmapIPv4FilterVlan2Id Unsigned32,
acdSmapIPv4FilterVlan2IdLast Unsigned32,
acdSmapIPv4FilterVlan2IdOper AcdFilterOperator,
acdSmapIPv4FilterVlan2CfiEn TruthValue,
acdSmapIPv4FilterVlan2Cfi Unsigned32,
acdSmapIPv4FilterVlan2TypeEn TruthValue,
acdSmapIPv4FilterVlan2Type AcdFilterVlanType,
acdSmapIPv4FilterSrcEn TruthValue,
acdSmapIPv4FilterSrc IpAddress,
acdSmapIPv4FilterSrcMask IpAddress,
acdSmapIPv4FilterDstEn TruthValue,
acdSmapIPv4FilterDst IpAddress,
acdSmapIPv4FilterDstMask IpAddress,
acdSmapIPv4FilterProtoEn TruthValue,
acdSmapIPv4FilterProto Unsigned32,
acdSmapIPv4FilterTTLEn TruthValue,
acdSmapIPv4FilterTTL Unsigned32,
acdSmapIPv4FilterIHLEn TruthValue,
acdSmapIPv4FilterIHL Unsigned32,
acdSmapIPv4FilterIpCosEn TruthValue,
acdSmapIPv4FilterIpCosMode INTEGER,
acdSmapIPv4FilterDscp Unsigned32,
acdSmapIPv4FilterDscpLast Unsigned32,
acdSmapIPv4FilterDscpOper AcdFilterOperator,
acdSmapIPv4FilterPre Unsigned32,
acdSmapIPv4FilterPreLast Unsigned32,
acdSmapIPv4FilterPreOper AcdFilterOperator,
acdSmapIPv4FilterECNEn TruthValue,
acdSmapIPv4FilterECN Unsigned32,
acdSmapIPv4FilterSrcPortEn TruthValue,
acdSmapIPv4FilterSrcPort Unsigned32,
acdSmapIPv4FilterDstPortEn TruthValue,
acdSmapIPv4FilterDstPort Unsigned32,
acdSmapIPv4FilterIcmpTypeEn TruthValue,
acdSmapIPv4FilterIcmpType Unsigned32,
acdSmapIPv4FilterIcmpCodeEn TruthValue,
acdSmapIPv4FilterIcmpCode Unsigned32
}
acdSmapIPv4FilterID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform."
::= { acdSmapIPv4FilterEntry 1 }
acdSmapIPv4FilterName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a string to identify the filter."
::= { acdSmapIPv4FilterEntry 2 }
acdSmapIPv4FilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need to set the RowStatus to destroy."
::= { acdSmapIPv4FilterEntry 3 }
acdSmapIPv4FilterVlan1PriorEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN priority check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 4 }
acdSmapIPv4FilterVlan1Prior OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 5 }
acdSmapIPv4FilterVlan1PriorLast OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN priority last value, used in range operation.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 6 }
acdSmapIPv4FilterVlan1PriorOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapIPv4FilterEntry 7 }
acdSmapIPv4FilterVlan1IdEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN ID check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 8 }
acdSmapIPv4FilterVlan1Id OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 9 }
acdSmapIPv4FilterVlan1IdLast OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 10 }
acdSmapIPv4FilterVlan1IdOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"First VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapIPv4FilterEntry 11 }
acdSmapIPv4FilterVlan1CfiEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN CFI check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 12 }
acdSmapIPv4FilterVlan1Cfi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 13 }
acdSmapIPv4FilterVlan1TypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the first VLAN Ethertype check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 14 }
acdSmapIPv4FilterVlan1Type OBJECT-TYPE
SYNTAX AcdFilterVlanType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Ethernet type."
DEFVAL { cvlan }
::= { acdSmapIPv4FilterEntry 15 }
acdSmapIPv4FilterVlan2PriorEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN priority check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 16 }
acdSmapIPv4FilterVlan2Prior OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 17 }
acdSmapIPv4FilterVlan2PriorLast OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Second VLAN priority last value, used in range operation.
Its value ranges from 0 to 7."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 18 }
acdSmapIPv4FilterVlan2PriorOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapIPv4FilterEntry 19 }
acdSmapIPv4FilterVlan2IdEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN ID check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 20 }
acdSmapIPv4FilterVlan2Id OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 21 }
acdSmapIPv4FilterVlan2IdLast OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 22 }
acdSmapIPv4FilterVlan2IdOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapIPv4FilterEntry 23 }
acdSmapIPv4FilterVlan2CfiEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN CFI check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 24 }
acdSmapIPv4FilterVlan2Cfi OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 25 }
acdSmapIPv4FilterVlan2TypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the second VLAN Ethertype check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 26 }
acdSmapIPv4FilterVlan2Type OBJECT-TYPE
SYNTAX AcdFilterVlanType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN Ethernet type."
DEFVAL { cvlan }
::= { acdSmapIPv4FilterEntry 27 }
acdSmapIPv4FilterSrcEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Source IP address check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 28 }
acdSmapIPv4FilterSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address used to compare the incoming traffic."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { acdSmapIPv4FilterEntry 29 }
acdSmapIPv4FilterSrcMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address mask used to compare the incoming traffic."
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
::= { acdSmapIPv4FilterEntry 30 }
acdSmapIPv4FilterDstEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Destination IP address check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 31 }
acdSmapIPv4FilterDst OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address used to compare the incoming traffic."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { acdSmapIPv4FilterEntry 32 }
acdSmapIPv4FilterDstMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address mask used to compare the
incoming traffic."
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
::= { acdSmapIPv4FilterEntry 33 }
acdSmapIPv4FilterProtoEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the IP protocol check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 34 }
acdSmapIPv4FilterProto OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP protocol used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 35 }
acdSmapIPv4FilterTTLEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the TTL check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 36 }
acdSmapIPv4FilterTTL OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TTL used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 37 }
acdSmapIPv4FilterIHLEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the IP Header Length check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 38 }
acdSmapIPv4FilterIHL OBJECT-TYPE
SYNTAX Unsigned32 (5..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Header Length used to compare the incoming traffic.
Its value ranges from 5 to 15."
DEFVAL { 5 }
::= { acdSmapIPv4FilterEntry 39 }
acdSmapIPv4FilterIpCosEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the Ethernet type check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 40 }
acdSmapIPv4FilterIpCosMode OBJECT-TYPE
SYNTAX INTEGER {
dscp(1),
pre(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range)."
DEFVAL { dscp }
::= { acdSmapIPv4FilterEntry 41 }
acdSmapIPv4FilterDscp OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 42 }
acdSmapIPv4FilterDscpLast OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 43 }
acdSmapIPv4FilterDscpOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DSCP operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapIPv4FilterEntry 44 }
acdSmapIPv4FilterPre OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 45 }
acdSmapIPv4FilterPreLast OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 46 }
acdSmapIPv4FilterPreOper OBJECT-TYPE
SYNTAX AcdFilterOperator
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Precedence operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range)."
DEFVAL { equalTo }
::= { acdSmapIPv4FilterEntry 47 }
acdSmapIPv4FilterECNEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the ECN (Explicite Cogestion Notification) check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 48 }
acdSmapIPv4FilterECN OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ECN value used to compare the incoming traffic.
Its value ranges from 0 to 3."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 49 }
acdSmapIPv4FilterSrcPortEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the UDP/TCP Source port check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 50 }
acdSmapIPv4FilterSrcPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP/TCP Source Port used to compare the incoming traffic.
Its value ranges from 0 to 65535."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 51 }
acdSmapIPv4FilterDstPortEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the UDP/TCP Destination port check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 52 }
acdSmapIPv4FilterDstPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP/TCP Destination Port used to compare the incoming traffic.
Its value ranges from 0 to 65535."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 53 }
acdSmapIPv4FilterIcmpTypeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the ICMP type check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 54 }
acdSmapIPv4FilterIcmpType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ICMP type used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 55 }
acdSmapIPv4FilterIcmpCodeEn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the ICMP code check."
DEFVAL { false }
::= { acdSmapIPv4FilterEntry 56 }
acdSmapIPv4FilterIcmpCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ICMP code used to compare the incoming traffic.
Its value ranges from 0 to 255."
DEFVAL { 0 }
::= { acdSmapIPv4FilterEntry 57 }
---------------------------------------------------------------------------
-- Filter Transaction ID Information
---------------------------------------------------------------------------
acdSmapL2FilterTableLastChangeTid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the transaction ID of the last change of the acdSmapL2FilterTable
table. If this value is different since the last read this is indicate
a table change."
::= { acdFilterTableTid 1 }
acdSmapIPv4FilterTableLastChangeTid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the transaction ID of the last change of the acdSmapIPv4FilterTable
table. If this value is different since the last read this is indicate
a table change."
::= { acdFilterTableTid 2 }
---------------------------------------------------------------------------
-- ACD-FILTER-MIB Module - Conformance Information
---------------------------------------------------------------------------
acdFilterCompliances OBJECT IDENTIFIER ::= { acdFilterConformance 1 }
acdFilterGroups OBJECT IDENTIFIER ::= { acdFilterConformance 2 }
---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------
acdL2FilterGroup OBJECT-GROUP
OBJECTS {
acdL2FilterName,
acdL2FilterMacDstEn,
acdL2FilterMacDst,
acdL2FilterMacDstMask,
acdL2FilterMacSrcEn,
acdL2FilterMacSrc,
acdL2FilterMacSrcMask,
acdL2FilterEtypeEn,
acdL2FilterEtype,
acdL2FilterVlan1PriorEn,
acdL2FilterVlan1Prior,
acdL2FilterVlan1CfiEn,
acdL2FilterVlan1Cfi,
acdL2FilterVlan1IdEn,
acdL2FilterVlan1Id,
acdL2FilterVlan2PriorEn,
acdL2FilterVlan2Prior,
acdL2FilterVlan2CfiEn,
acdL2FilterVlan2Cfi,
acdL2FilterVlan2IdEn,
acdL2FilterVlan2Id,
acdL2FilterRowStatus
}
STATUS current
DESCRIPTION
"Objects for the L2 filter configuration Group."
::= { acdFilterGroups 1 }
acdIPv4FilterGroup OBJECT-GROUP
OBJECTS {
acdIPv4FilterName,
acdIPv4FilterSrcEn,
acdIPv4FilterSrc,
acdIPv4FilterSrcMask,
acdIPv4FilterDstEn,
acdIPv4FilterDst,
acdIPv4FilterDstMask,
acdIPv4FilterProtoEn,
acdIPv4FilterProto,
acdIPv4FilterTTLEn,
acdIPv4FilterTTL,
acdIPv4FilterIHLEn,
acdIPv4FilterIHL,
acdIPv4FilterDscpEn,
acdIPv4FilterDscp,
acdIPv4FilterECNEn,
acdIPv4FilterECN,
acdIPv4FilterSrcPortEn,
acdIPv4FilterSrcPort,
acdIPv4FilterDstPortEn,
acdIPv4FilterDstPort,
acdIPv4FilterIcmpTypeEn,
acdIPv4FilterIcmpType,
acdIPv4FilterIcmpCodeEn,
acdIPv4FilterIcmpCode,
acdIPv4FilterRowStatus
}
STATUS current
DESCRIPTION
"Objects for the IPv4 filter configuration Group."
::= { acdFilterGroups 2 }
acdSmapL2FilterGroup OBJECT-GROUP
OBJECTS {
acdSmapL2FilterName,
acdSmapL2FilterRowStatus,
acdSmapL2FilterVlan1PriorEn,
acdSmapL2FilterVlan1Prior,
acdSmapL2FilterVlan1PriorLast,
acdSmapL2FilterVlan1PriorOper,
acdSmapL2FilterVlan1IdEn,
acdSmapL2FilterVlan1Id,
acdSmapL2FilterVlan1IdLast,
acdSmapL2FilterVlan1IdOper,
acdSmapL2FilterVlan1CfiEn,
acdSmapL2FilterVlan1Cfi,
acdSmapL2FilterVlan1TypeEn,
acdSmapL2FilterVlan1Type,
acdSmapL2FilterVlan2PriorEn,
acdSmapL2FilterVlan2Prior,
acdSmapL2FilterVlan2PriorLast,
acdSmapL2FilterVlan2PriorOper,
acdSmapL2FilterVlan2IdEn,
acdSmapL2FilterVlan2Id,
acdSmapL2FilterVlan2IdLast,
acdSmapL2FilterVlan2IdOper,
acdSmapL2FilterVlan2CfiEn,
acdSmapL2FilterVlan2Cfi,
acdSmapL2FilterVlan2TypeEn,
acdSmapL2FilterVlan2Type,
acdSmapL2FilterMacDstEn,
acdSmapL2FilterMacDst,
acdSmapL2FilterMacDstMask,
acdSmapL2FilterMacSrcEn,
acdSmapL2FilterMacSrc,
acdSmapL2FilterMacSrcMask,
acdSmapL2FilterEtypeEn,
acdSmapL2FilterEtype,
acdSmapL2FilterIpCosEn,
acdSmapL2FilterIpCosMode,
acdSmapL2FilterDscp,
acdSmapL2FilterDscpLast,
acdSmapL2FilterDscpOper,
acdSmapL2FilterPre,
acdSmapL2FilterPreLast,
acdSmapL2FilterPreOper
}
STATUS current
DESCRIPTION
"Objects for the SMAP L2 filter configuration Group."
::= { acdFilterGroups 3 }
acdSmapIPv4FilterGroup OBJECT-GROUP
OBJECTS {
acdSmapIPv4FilterName,
acdSmapIPv4FilterRowStatus,
acdSmapIPv4FilterVlan1PriorEn,
acdSmapIPv4FilterVlan1Prior,
acdSmapIPv4FilterVlan1PriorLast,
acdSmapIPv4FilterVlan1PriorOper,
acdSmapIPv4FilterVlan1IdEn,
acdSmapIPv4FilterVlan1Id,
acdSmapIPv4FilterVlan1IdLast,
acdSmapIPv4FilterVlan1IdOper,
acdSmapIPv4FilterVlan1CfiEn,
acdSmapIPv4FilterVlan1Cfi,
acdSmapIPv4FilterVlan1TypeEn,
acdSmapIPv4FilterVlan1Type,
acdSmapIPv4FilterVlan2PriorEn,
acdSmapIPv4FilterVlan2Prior,
acdSmapIPv4FilterVlan2PriorLast,
acdSmapIPv4FilterVlan2PriorOper,
acdSmapIPv4FilterVlan2IdEn,
acdSmapIPv4FilterVlan2Id,
acdSmapIPv4FilterVlan2IdLast,
acdSmapIPv4FilterVlan2IdOper,
acdSmapIPv4FilterVlan2CfiEn,
acdSmapIPv4FilterVlan2Cfi,
acdSmapIPv4FilterVlan2TypeEn,
acdSmapIPv4FilterVlan2Type,
acdSmapIPv4FilterSrcEn,
acdSmapIPv4FilterSrc,
acdSmapIPv4FilterSrcMask,
acdSmapIPv4FilterDstEn,
acdSmapIPv4FilterDst,
acdSmapIPv4FilterDstMask,
acdSmapIPv4FilterProtoEn,
acdSmapIPv4FilterProto,
acdSmapIPv4FilterTTLEn,
acdSmapIPv4FilterTTL,
acdSmapIPv4FilterIHLEn,
acdSmapIPv4FilterIHL,
acdSmapIPv4FilterIpCosEn,
acdSmapIPv4FilterIpCosMode,
acdSmapIPv4FilterDscp,
acdSmapIPv4FilterDscpLast,
acdSmapIPv4FilterDscpOper,
acdSmapIPv4FilterPre,
acdSmapIPv4FilterPreLast,
acdSmapIPv4FilterPreOper,
acdSmapIPv4FilterECNEn,
acdSmapIPv4FilterECN,
acdSmapIPv4FilterSrcPortEn,
acdSmapIPv4FilterSrcPort,
acdSmapIPv4FilterDstPortEn,
acdSmapIPv4FilterDstPort,
acdSmapIPv4FilterIcmpTypeEn,
acdSmapIPv4FilterIcmpType,
acdSmapIPv4FilterIcmpCodeEn,
acdSmapIPv4FilterIcmpCode
}
STATUS current
DESCRIPTION
"Objects for the SMAP IPv4 filter configuration Group."
::= { acdFilterGroups 4 }
acdFilterTidGroup OBJECT-GROUP
OBJECTS {
acdSmapL2FilterTableLastChangeTid,
acdSmapIPv4FilterTableLastChangeTid
}
STATUS current
DESCRIPTION
"List of scalars to monitior changes in tables."
::= { acdFilterGroups 5 }
acdFilterCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the ACD-FILTER-MIB module."
MODULE
MANDATORY-GROUPS {
acdL2FilterGroup,
acdIPv4FilterGroup,
acdSmapL2FilterGroup,
acdSmapIPv4FilterGroup,
acdFilterTidGroup
}
OBJECT acdL2FilterRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
OBJECT acdIPv4FilterRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
OBJECT acdSmapL2FilterRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
OBJECT acdSmapIPv4FilterRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
::= { acdFilterCompliances 1 }
END
Reference in New Issue Copy Permalink