2034 lines
65 KiB
Plaintext
2034 lines
65 KiB
Plaintext
--
|
|
-- Accedian Enterprise Specific MIB
|
|
--
|
|
-- Copyright (c) 2005-2011, Accedian Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
|
|
ACD-FILTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
IpAddress, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue, MacAddress, TEXTUAL-CONVENTION, RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
acdMibs
|
|
FROM ACCEDIAN-SMI;
|
|
|
|
acdFilter MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201110100100Z"
|
|
ORGANIZATION "Accedian Networks, Inc."
|
|
CONTACT-INFO
|
|
"Accedian Technical Assistance Center
|
|
Accedian Networks, Inc.
|
|
4878 Levy, suite 202
|
|
Saint-Laurent, Quebec Canada H4R 2P1
|
|
E-mail: support@accedian.com"
|
|
DESCRIPTION
|
|
"The Filter database for this Accedian Networks device."
|
|
|
|
REVISION "201110100100Z" -- 10 October 2011
|
|
DESCRIPTION
|
|
"Add acdSmapL2FilterTableLastChangeTid and
|
|
acdSmapIPv4FilterTableLastChangeTid.
|
|
|
|
Deprecated acdL2FilterTable and acdIPv4FilterTable tables."
|
|
|
|
REVISION "201011100100Z" -- 10 November 2010
|
|
DESCRIPTION
|
|
"Add compliance section."
|
|
|
|
REVISION "200805010100Z" -- 1 May 2008
|
|
DESCRIPTION
|
|
"Add SMAP filter tables and RowStatus in acdL2FilterTable and
|
|
acdIPv4FilterTable tables."
|
|
|
|
REVISION "200608060100Z" -- 6 Aug 2006
|
|
DESCRIPTION
|
|
"Initial version of MIB module ACD-FILTER-MIB."
|
|
|
|
::= { acdMibs 2 }
|
|
|
|
acdFilterNotifications OBJECT IDENTIFIER ::= { acdFilter 5 }
|
|
acdFilterMIBObjects OBJECT IDENTIFIER ::= { acdFilter 6 }
|
|
acdFilterConformance OBJECT IDENTIFIER ::= { acdFilter 7 }
|
|
|
|
acdFilterTableTid OBJECT IDENTIFIER ::= { acdFilterMIBObjects 1 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Textual conventions
|
|
---------------------------------------------------------------------------
|
|
|
|
AcdFilterOperator ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operator for field comparaison. Valid operator types are:
|
|
Greater than, Less than, Equal to or Range (inclusive range)."
|
|
SYNTAX INTEGER {
|
|
lessThan(1),
|
|
greaterThan(2),
|
|
equalTo(3),
|
|
range(4)
|
|
}
|
|
|
|
AcdFilterVlanType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
SYNTAX INTEGER {
|
|
cvlan(1),
|
|
svlan(2),
|
|
both(3)
|
|
}
|
|
---------------------------------------------------------------------------
|
|
-- The L2 table
|
|
-- This table contains all Layer 2 Filters.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdL2FilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdL2FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of all Layer 2 filters"
|
|
::= { acdFilter 1 }
|
|
|
|
acdL2FilterEntry OBJECT-TYPE
|
|
SYNTAX AcdL2FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Filter is a pattern matching a definition against packets."
|
|
INDEX { acdL2FilterID }
|
|
::= { acdL2FilterTable 1 }
|
|
|
|
|
|
AcdL2FilterEntry ::= SEQUENCE {
|
|
acdL2FilterID Unsigned32,
|
|
acdL2FilterName DisplayString,
|
|
acdL2FilterMacDstEn TruthValue,
|
|
acdL2FilterMacDst MacAddress,
|
|
acdL2FilterMacDstMask Unsigned32,
|
|
acdL2FilterMacSrcEn TruthValue,
|
|
acdL2FilterMacSrc MacAddress,
|
|
acdL2FilterMacSrcMask Unsigned32,
|
|
acdL2FilterEtypeEn TruthValue,
|
|
acdL2FilterEtype Unsigned32,
|
|
acdL2FilterVlan1PriorEn TruthValue,
|
|
acdL2FilterVlan1Prior Unsigned32,
|
|
acdL2FilterVlan1CfiEn TruthValue,
|
|
acdL2FilterVlan1Cfi Unsigned32,
|
|
acdL2FilterVlan1IdEn TruthValue,
|
|
acdL2FilterVlan1Id Unsigned32,
|
|
acdL2FilterVlan2PriorEn TruthValue,
|
|
acdL2FilterVlan2Prior Unsigned32,
|
|
acdL2FilterVlan2CfiEn TruthValue,
|
|
acdL2FilterVlan2Cfi Unsigned32,
|
|
acdL2FilterVlan2IdEn TruthValue,
|
|
acdL2FilterVlan2Id Unsigned32,
|
|
acdL2FilterRowStatus RowStatus
|
|
}
|
|
|
|
acdL2FilterID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each filter. Its value ranges from 1 to maximum
|
|
value. This maximum value depend of the type of platform."
|
|
::= { acdL2FilterEntry 1 }
|
|
|
|
acdL2FilterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to identify the filter."
|
|
::= { acdL2FilterEntry 2 }
|
|
|
|
acdL2FilterMacDstEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the destination MAC address check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 3 }
|
|
|
|
acdL2FilterMacDst OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address used to compare the incoming traffic."
|
|
DEFVAL { '000000000000'H }
|
|
::= { acdL2FilterEntry 4 }
|
|
|
|
acdL2FilterMacDstMask OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..48)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of destination MAC address bits to compare. Its value ranges
|
|
from 0 to 48. Only specific mask are valid per platform."
|
|
DEFVAL { 48 }
|
|
::= { acdL2FilterEntry 5 }
|
|
|
|
acdL2FilterMacSrcEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the source MAC address check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 6 }
|
|
|
|
acdL2FilterMacSrc OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source MAC address used to compare the incoming traffic."
|
|
DEFVAL { '000000000000'H }
|
|
::= { acdL2FilterEntry 7 }
|
|
|
|
acdL2FilterMacSrcMask OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..48)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of source MAC address bits to compare. Its value ranges
|
|
from 0 to 48. Only specific mask are valid per platform."
|
|
DEFVAL { 48 }
|
|
::= { acdL2FilterEntry 8 }
|
|
|
|
acdL2FilterEtypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Ethernet type check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 9 }
|
|
|
|
acdL2FilterEtype OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet type used to compare the incoming traffic."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 10 }
|
|
|
|
acdL2FilterVlan1PriorEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN priority check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 11 }
|
|
|
|
acdL2FilterVlan1Prior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN priority used to compare the incoming traffic.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 12 }
|
|
|
|
acdL2FilterVlan1CfiEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN CFI check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 13 }
|
|
|
|
acdL2FilterVlan1Cfi OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN CFI used to compare the incoming traffic.
|
|
Its value is 0 or 1."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 14 }
|
|
|
|
acdL2FilterVlan1IdEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN ID check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 15 }
|
|
|
|
acdL2FilterVlan1Id OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 16 }
|
|
|
|
acdL2FilterVlan2PriorEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN priority check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 17 }
|
|
|
|
acdL2FilterVlan2Prior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN priority used to compare the incoming traffic.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 18 }
|
|
|
|
acdL2FilterVlan2CfiEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN CFI check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 19 }
|
|
|
|
acdL2FilterVlan2Cfi OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN CFI used to compare the incoming traffic.
|
|
Its value is 0 or 1."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 20 }
|
|
|
|
acdL2FilterVlan2IdEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN ID check."
|
|
DEFVAL { false }
|
|
::= { acdL2FilterEntry 21 }
|
|
|
|
acdL2FilterVlan2Id OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4065)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdL2FilterEntry 22 }
|
|
|
|
acdL2FilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new filter you shall provide the a unique filter name for
|
|
an empty row with the RowStatus set to Create and Go. To delete the
|
|
row you need to set the RowStatus to destroy."
|
|
::= { acdL2FilterEntry 23 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The IPv4 table
|
|
-- This table contains all IPv4 Filters.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdIPv4FilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdIPv4FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of all IPv4 filters"
|
|
::= { acdFilter 2 }
|
|
|
|
acdIPv4FilterEntry OBJECT-TYPE
|
|
SYNTAX AcdIPv4FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Filter is a pattern matching a definition against packets."
|
|
INDEX { acdIPv4FilterID }
|
|
::= { acdIPv4FilterTable 1 }
|
|
|
|
AcdIPv4FilterEntry ::= SEQUENCE {
|
|
acdIPv4FilterID Unsigned32,
|
|
acdIPv4FilterName DisplayString,
|
|
acdIPv4FilterSrcEn TruthValue,
|
|
acdIPv4FilterSrc IpAddress,
|
|
acdIPv4FilterSrcMask IpAddress,
|
|
acdIPv4FilterDstEn TruthValue,
|
|
acdIPv4FilterDst IpAddress,
|
|
acdIPv4FilterDstMask IpAddress,
|
|
acdIPv4FilterProtoEn TruthValue,
|
|
acdIPv4FilterProto Unsigned32,
|
|
acdIPv4FilterTTLEn TruthValue,
|
|
acdIPv4FilterTTL Unsigned32,
|
|
acdIPv4FilterIHLEn TruthValue,
|
|
acdIPv4FilterIHL Unsigned32,
|
|
acdIPv4FilterDscpEn TruthValue,
|
|
acdIPv4FilterDscp Unsigned32,
|
|
acdIPv4FilterECNEn TruthValue,
|
|
acdIPv4FilterECN Unsigned32,
|
|
acdIPv4FilterSrcPortEn TruthValue,
|
|
acdIPv4FilterSrcPort Unsigned32,
|
|
acdIPv4FilterDstPortEn TruthValue,
|
|
acdIPv4FilterDstPort Unsigned32,
|
|
acdIPv4FilterIcmpTypeEn TruthValue,
|
|
acdIPv4FilterIcmpType Unsigned32,
|
|
acdIPv4FilterIcmpCodeEn TruthValue,
|
|
acdIPv4FilterIcmpCode Unsigned32,
|
|
acdIPv4FilterRowStatus RowStatus
|
|
}
|
|
|
|
acdIPv4FilterID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each filter. Its value ranges from 1 to maximum
|
|
value. This maximum value depend of the type of platform."
|
|
::= { acdIPv4FilterEntry 1 }
|
|
|
|
acdIPv4FilterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to identify the filter."
|
|
::= { acdIPv4FilterEntry 2 }
|
|
|
|
acdIPv4FilterSrcEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Source IP address check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 3 }
|
|
|
|
acdIPv4FilterSrc OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address used to compare the incoming traffic."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { acdIPv4FilterEntry 4 }
|
|
|
|
acdIPv4FilterSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address mask used to compare the incoming traffic."
|
|
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
|
|
::= { acdIPv4FilterEntry 5 }
|
|
|
|
acdIPv4FilterDstEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Destination IP address check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 6 }
|
|
|
|
acdIPv4FilterDst OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address used to compare the incoming traffic."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { acdIPv4FilterEntry 7 }
|
|
|
|
acdIPv4FilterDstMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address mask used to compare the incoming
|
|
traffic."
|
|
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
|
|
::= { acdIPv4FilterEntry 8 }
|
|
|
|
acdIPv4FilterProtoEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the IP protocol check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 9 }
|
|
|
|
acdIPv4FilterProto OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP protocol used to compare the incoming traffic. Its value
|
|
ranges from 0 to 255."
|
|
DEFVAL { 1 }
|
|
::= { acdIPv4FilterEntry 10 }
|
|
|
|
acdIPv4FilterTTLEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the TTL check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 11 }
|
|
|
|
acdIPv4FilterTTL OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TTL used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 255 }
|
|
::= { acdIPv4FilterEntry 12 }
|
|
|
|
acdIPv4FilterIHLEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the IP Header Length check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 13 }
|
|
|
|
acdIPv4FilterIHL OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Header Length used to compare the incoming traffic.
|
|
Its value ranges from 5 to 15."
|
|
DEFVAL { 5 }
|
|
::= { acdIPv4FilterEntry 14 }
|
|
|
|
acdIPv4FilterDscpEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the DSCP (Diff-Serv Code Point) check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 15 }
|
|
|
|
acdIPv4FilterDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 63."
|
|
DEFVAL { 0 }
|
|
::= { acdIPv4FilterEntry 16 }
|
|
|
|
acdIPv4FilterECNEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ECN (Explicite Cogestion Notification) check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 17 }
|
|
|
|
acdIPv4FilterECN OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ECN value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 3."
|
|
DEFVAL { 0 }
|
|
::= { acdIPv4FilterEntry 18 }
|
|
|
|
acdIPv4FilterSrcPortEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the UDP/TCP Source port check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 19 }
|
|
|
|
acdIPv4FilterSrcPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP/TCP Source Port used to compare the incoming traffic.
|
|
Its value ranges from 0 to 65535."
|
|
DEFVAL { 0 }
|
|
::= { acdIPv4FilterEntry 20 }
|
|
|
|
acdIPv4FilterDstPortEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the UDP/TCP Destination port check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 21 }
|
|
|
|
acdIPv4FilterDstPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP/TCP Destination Port used to compare the incoming traffic.
|
|
Its value ranges from 0 to 65535."
|
|
DEFVAL { 0 }
|
|
::= { acdIPv4FilterEntry 22 }
|
|
|
|
acdIPv4FilterIcmpTypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ICMP type check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 23 }
|
|
|
|
acdIPv4FilterIcmpType OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICMP type used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { acdIPv4FilterEntry 24 }
|
|
|
|
acdIPv4FilterIcmpCodeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ICMP code check."
|
|
DEFVAL { false }
|
|
::= { acdIPv4FilterEntry 25 }
|
|
|
|
acdIPv4FilterIcmpCode OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICMP code used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { acdIPv4FilterEntry 26 }
|
|
|
|
acdIPv4FilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new filter you shall provide the a unique filter name for
|
|
an empty row with the RowStatus set to Create and Go. To delete the
|
|
row you need to set the RowStatus to destroy."
|
|
::= { acdIPv4FilterEntry 27 }
|
|
|
|
-----------------------------------------------------------------------
|
|
-- The service mapping (SMAP) L2 table
|
|
-- This table contains all SMAP Layer 2 Filters.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapL2FilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSmapL2FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all service mapping (SMAP) Layer 2 filters"
|
|
::= { acdFilter 3 }
|
|
|
|
acdSmapL2FilterEntry OBJECT-TYPE
|
|
SYNTAX AcdSmapL2FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Filter is a pattern matching a definition against packets."
|
|
INDEX { acdSmapL2FilterID }
|
|
::= { acdSmapL2FilterTable 1 }
|
|
|
|
|
|
AcdSmapL2FilterEntry ::= SEQUENCE {
|
|
acdSmapL2FilterID Unsigned32,
|
|
acdSmapL2FilterName DisplayString,
|
|
acdSmapL2FilterRowStatus RowStatus,
|
|
acdSmapL2FilterVlan1PriorEn TruthValue,
|
|
acdSmapL2FilterVlan1Prior Unsigned32,
|
|
acdSmapL2FilterVlan1PriorLast Unsigned32,
|
|
acdSmapL2FilterVlan1PriorOper AcdFilterOperator,
|
|
acdSmapL2FilterVlan1IdEn TruthValue,
|
|
acdSmapL2FilterVlan1Id Unsigned32,
|
|
acdSmapL2FilterVlan1IdLast Unsigned32,
|
|
acdSmapL2FilterVlan1IdOper AcdFilterOperator,
|
|
acdSmapL2FilterVlan1CfiEn TruthValue,
|
|
acdSmapL2FilterVlan1Cfi Unsigned32,
|
|
acdSmapL2FilterVlan1TypeEn TruthValue,
|
|
acdSmapL2FilterVlan1Type AcdFilterVlanType,
|
|
acdSmapL2FilterVlan2PriorEn TruthValue,
|
|
acdSmapL2FilterVlan2Prior Unsigned32,
|
|
acdSmapL2FilterVlan2PriorLast Unsigned32,
|
|
acdSmapL2FilterVlan2PriorOper AcdFilterOperator,
|
|
acdSmapL2FilterVlan2IdEn TruthValue,
|
|
acdSmapL2FilterVlan2Id Unsigned32,
|
|
acdSmapL2FilterVlan2IdLast Unsigned32,
|
|
acdSmapL2FilterVlan2IdOper AcdFilterOperator,
|
|
acdSmapL2FilterVlan2CfiEn TruthValue,
|
|
acdSmapL2FilterVlan2Cfi Unsigned32,
|
|
acdSmapL2FilterVlan2TypeEn TruthValue,
|
|
acdSmapL2FilterVlan2Type AcdFilterVlanType,
|
|
acdSmapL2FilterMacDstEn TruthValue,
|
|
acdSmapL2FilterMacDst MacAddress,
|
|
acdSmapL2FilterMacDstMask Unsigned32,
|
|
acdSmapL2FilterMacSrcEn TruthValue,
|
|
acdSmapL2FilterMacSrc MacAddress,
|
|
acdSmapL2FilterMacSrcMask Unsigned32,
|
|
acdSmapL2FilterEtypeEn TruthValue,
|
|
acdSmapL2FilterEtype Unsigned32,
|
|
acdSmapL2FilterIpCosEn TruthValue,
|
|
acdSmapL2FilterIpCosMode INTEGER,
|
|
acdSmapL2FilterDscp Unsigned32,
|
|
acdSmapL2FilterDscpLast Unsigned32,
|
|
acdSmapL2FilterDscpOper AcdFilterOperator,
|
|
acdSmapL2FilterPre Unsigned32,
|
|
acdSmapL2FilterPreLast Unsigned32,
|
|
acdSmapL2FilterPreOper AcdFilterOperator
|
|
}
|
|
|
|
acdSmapL2FilterID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each filter. Its value ranges from 1 to maximum
|
|
value. This maximum value depend of the type of platform."
|
|
::= { acdSmapL2FilterEntry 1 }
|
|
|
|
acdSmapL2FilterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to identify the filter."
|
|
::= { acdSmapL2FilterEntry 2 }
|
|
|
|
acdSmapL2FilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new filter you shall provide the a unique filter name for
|
|
an empty row with the RowStatus set to Create and Go. To delete the
|
|
row you need to set the RowStatus to destroy."
|
|
::= { acdSmapL2FilterEntry 3 }
|
|
|
|
acdSmapL2FilterVlan1PriorEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN priority check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 4 }
|
|
|
|
acdSmapL2FilterVlan1Prior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN priority used to compare the incoming traffic.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 5 }
|
|
|
|
acdSmapL2FilterVlan1PriorLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN priority last value, used in range operation.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 6 }
|
|
|
|
acdSmapL2FilterVlan1PriorOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN Priority operator. Valid operator types are:
|
|
Greater than, Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapL2FilterEntry 7 }
|
|
|
|
acdSmapL2FilterVlan1IdEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN ID check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 8 }
|
|
|
|
acdSmapL2FilterVlan1Id OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 9 }
|
|
|
|
acdSmapL2FilterVlan1IdLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN ID last value, used in range operation.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 10 }
|
|
|
|
acdSmapL2FilterVlan1IdOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN ID operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapL2FilterEntry 11 }
|
|
|
|
acdSmapL2FilterVlan1CfiEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN CFI check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 12 }
|
|
|
|
acdSmapL2FilterVlan1Cfi OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN CFI used to compare the incoming traffic.
|
|
Its value is 0 or 1."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 13 }
|
|
|
|
acdSmapL2FilterVlan1TypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN Ethertype check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 14 }
|
|
|
|
acdSmapL2FilterVlan1Type OBJECT-TYPE
|
|
SYNTAX AcdFilterVlanType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Ethernet type."
|
|
DEFVAL { cvlan }
|
|
::= { acdSmapL2FilterEntry 15 }
|
|
|
|
acdSmapL2FilterVlan2PriorEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN priority check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 16 }
|
|
|
|
acdSmapL2FilterVlan2Prior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN priority used to compare the incoming traffic.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 17 }
|
|
|
|
acdSmapL2FilterVlan2PriorLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Second VLAN priority last value, used in range operation.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 18 }
|
|
|
|
acdSmapL2FilterVlan2PriorOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapL2FilterEntry 19 }
|
|
|
|
acdSmapL2FilterVlan2IdEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN ID check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 20 }
|
|
|
|
acdSmapL2FilterVlan2Id OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 21 }
|
|
|
|
acdSmapL2FilterVlan2IdLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Second VLAN ID last value, used in range operation.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 22 }
|
|
|
|
acdSmapL2FilterVlan2IdOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Second VLAN ID operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapL2FilterEntry 23 }
|
|
|
|
acdSmapL2FilterVlan2CfiEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN CFI check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 24 }
|
|
|
|
acdSmapL2FilterVlan2Cfi OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN CFI used to compare the incoming traffic.
|
|
Its value is 0 or 1."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 25 }
|
|
|
|
acdSmapL2FilterVlan2TypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN Ethertype check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 26 }
|
|
|
|
acdSmapL2FilterVlan2Type OBJECT-TYPE
|
|
SYNTAX AcdFilterVlanType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Ethernet type."
|
|
DEFVAL { cvlan }
|
|
::= { acdSmapL2FilterEntry 27 }
|
|
|
|
acdSmapL2FilterMacDstEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the destination MAC address check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 28 }
|
|
|
|
acdSmapL2FilterMacDst OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address used to compare the incoming traffic."
|
|
DEFVAL { '000000000000'H }
|
|
::= { acdSmapL2FilterEntry 29 }
|
|
|
|
acdSmapL2FilterMacDstMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of destination MAC address bits to compare. Its value ranges
|
|
from 0 to 48."
|
|
DEFVAL { 48 }
|
|
::= { acdSmapL2FilterEntry 30 }
|
|
|
|
acdSmapL2FilterMacSrcEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the source MAC address check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 31 }
|
|
|
|
acdSmapL2FilterMacSrc OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source MAC address used to compare the incoming traffic."
|
|
DEFVAL { '000000000000'H }
|
|
::= { acdSmapL2FilterEntry 32 }
|
|
|
|
acdSmapL2FilterMacSrcMask OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of source MAC address bits to compare. Its value ranges
|
|
from 0 to 48."
|
|
DEFVAL { 48 }
|
|
::= { acdSmapL2FilterEntry 33 }
|
|
|
|
acdSmapL2FilterEtypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Ethernet type check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 34 }
|
|
|
|
acdSmapL2FilterEtype OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ethernet type used to compare the incoming traffic."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 35 }
|
|
|
|
acdSmapL2FilterIpCosEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Ethernet type check."
|
|
DEFVAL { false }
|
|
::= { acdSmapL2FilterEntry 36 }
|
|
|
|
acdSmapL2FilterIpCosMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dscp(1),
|
|
pre(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID operator. Valid operator types are: Greater than, Less than,
|
|
Equal to or Range (inclusive range)."
|
|
DEFVAL { dscp }
|
|
::= { acdSmapL2FilterEntry 37 }
|
|
|
|
acdSmapL2FilterDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 63."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 38 }
|
|
|
|
acdSmapL2FilterDscpLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last DSCP value, used in range operation.
|
|
Its value ranges from 0 to 63."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 39 }
|
|
|
|
acdSmapL2FilterDscpOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapL2FilterEntry 40 }
|
|
|
|
acdSmapL2FilterPre OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Precedence value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 3."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 41 }
|
|
|
|
acdSmapL2FilterPreLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last Precedence value, used in range operation.
|
|
Its value ranges from 0 to 3."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapL2FilterEntry 42 }
|
|
|
|
acdSmapL2FilterPreOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precedence operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapL2FilterEntry 43 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Extended IPv4 table
|
|
-- This table contains all IPv4 Filters.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapIPv4FilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSmapIPv4FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all Extended IPv4 filters"
|
|
::= { acdFilter 4 }
|
|
|
|
acdSmapIPv4FilterEntry OBJECT-TYPE
|
|
SYNTAX AcdSmapIPv4FilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Filter is a pattern matching a definition against packets."
|
|
INDEX { acdSmapIPv4FilterID }
|
|
::= { acdSmapIPv4FilterTable 1 }
|
|
|
|
AcdSmapIPv4FilterEntry ::= SEQUENCE {
|
|
acdSmapIPv4FilterID Unsigned32,
|
|
acdSmapIPv4FilterName DisplayString,
|
|
acdSmapIPv4FilterRowStatus RowStatus,
|
|
acdSmapIPv4FilterVlan1PriorEn TruthValue,
|
|
acdSmapIPv4FilterVlan1Prior Unsigned32,
|
|
acdSmapIPv4FilterVlan1PriorLast Unsigned32,
|
|
acdSmapIPv4FilterVlan1PriorOper AcdFilterOperator,
|
|
acdSmapIPv4FilterVlan1IdEn TruthValue,
|
|
acdSmapIPv4FilterVlan1Id Unsigned32,
|
|
acdSmapIPv4FilterVlan1IdLast Unsigned32,
|
|
acdSmapIPv4FilterVlan1IdOper AcdFilterOperator,
|
|
acdSmapIPv4FilterVlan1CfiEn TruthValue,
|
|
acdSmapIPv4FilterVlan1Cfi Unsigned32,
|
|
acdSmapIPv4FilterVlan1TypeEn TruthValue,
|
|
acdSmapIPv4FilterVlan1Type AcdFilterVlanType,
|
|
acdSmapIPv4FilterVlan2PriorEn TruthValue,
|
|
acdSmapIPv4FilterVlan2Prior Unsigned32,
|
|
acdSmapIPv4FilterVlan2PriorLast Unsigned32,
|
|
acdSmapIPv4FilterVlan2PriorOper AcdFilterOperator,
|
|
acdSmapIPv4FilterVlan2IdEn TruthValue,
|
|
acdSmapIPv4FilterVlan2Id Unsigned32,
|
|
acdSmapIPv4FilterVlan2IdLast Unsigned32,
|
|
acdSmapIPv4FilterVlan2IdOper AcdFilterOperator,
|
|
acdSmapIPv4FilterVlan2CfiEn TruthValue,
|
|
acdSmapIPv4FilterVlan2Cfi Unsigned32,
|
|
acdSmapIPv4FilterVlan2TypeEn TruthValue,
|
|
acdSmapIPv4FilterVlan2Type AcdFilterVlanType,
|
|
acdSmapIPv4FilterSrcEn TruthValue,
|
|
acdSmapIPv4FilterSrc IpAddress,
|
|
acdSmapIPv4FilterSrcMask IpAddress,
|
|
acdSmapIPv4FilterDstEn TruthValue,
|
|
acdSmapIPv4FilterDst IpAddress,
|
|
acdSmapIPv4FilterDstMask IpAddress,
|
|
acdSmapIPv4FilterProtoEn TruthValue,
|
|
acdSmapIPv4FilterProto Unsigned32,
|
|
acdSmapIPv4FilterTTLEn TruthValue,
|
|
acdSmapIPv4FilterTTL Unsigned32,
|
|
acdSmapIPv4FilterIHLEn TruthValue,
|
|
acdSmapIPv4FilterIHL Unsigned32,
|
|
acdSmapIPv4FilterIpCosEn TruthValue,
|
|
acdSmapIPv4FilterIpCosMode INTEGER,
|
|
acdSmapIPv4FilterDscp Unsigned32,
|
|
acdSmapIPv4FilterDscpLast Unsigned32,
|
|
acdSmapIPv4FilterDscpOper AcdFilterOperator,
|
|
acdSmapIPv4FilterPre Unsigned32,
|
|
acdSmapIPv4FilterPreLast Unsigned32,
|
|
acdSmapIPv4FilterPreOper AcdFilterOperator,
|
|
acdSmapIPv4FilterECNEn TruthValue,
|
|
acdSmapIPv4FilterECN Unsigned32,
|
|
acdSmapIPv4FilterSrcPortEn TruthValue,
|
|
acdSmapIPv4FilterSrcPort Unsigned32,
|
|
acdSmapIPv4FilterDstPortEn TruthValue,
|
|
acdSmapIPv4FilterDstPort Unsigned32,
|
|
acdSmapIPv4FilterIcmpTypeEn TruthValue,
|
|
acdSmapIPv4FilterIcmpType Unsigned32,
|
|
acdSmapIPv4FilterIcmpCodeEn TruthValue,
|
|
acdSmapIPv4FilterIcmpCode Unsigned32
|
|
}
|
|
|
|
acdSmapIPv4FilterID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each filter. Its value ranges from 1 to maximum
|
|
value. This maximum value depend of the type of platform."
|
|
::= { acdSmapIPv4FilterEntry 1 }
|
|
|
|
acdSmapIPv4FilterName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to identify the filter."
|
|
::= { acdSmapIPv4FilterEntry 2 }
|
|
|
|
acdSmapIPv4FilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new filter you shall provide the a unique filter name for
|
|
an empty row with the RowStatus set to Create and Go. To delete the
|
|
row you need to set the RowStatus to destroy."
|
|
::= { acdSmapIPv4FilterEntry 3 }
|
|
|
|
acdSmapIPv4FilterVlan1PriorEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN priority check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 4 }
|
|
|
|
acdSmapIPv4FilterVlan1Prior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN priority used to compare the incoming traffic.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 5 }
|
|
|
|
acdSmapIPv4FilterVlan1PriorLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN priority last value, used in range operation.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 6 }
|
|
|
|
acdSmapIPv4FilterVlan1PriorOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapIPv4FilterEntry 7 }
|
|
|
|
acdSmapIPv4FilterVlan1IdEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN ID check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 8 }
|
|
|
|
acdSmapIPv4FilterVlan1Id OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 9 }
|
|
|
|
acdSmapIPv4FilterVlan1IdLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN ID last value, used in range operation.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 10 }
|
|
|
|
acdSmapIPv4FilterVlan1IdOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"First VLAN ID operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapIPv4FilterEntry 11 }
|
|
|
|
acdSmapIPv4FilterVlan1CfiEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN CFI check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 12 }
|
|
|
|
acdSmapIPv4FilterVlan1Cfi OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first VLAN CFI used to compare the incoming traffic.
|
|
Its value is 0 or 1."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 13 }
|
|
|
|
acdSmapIPv4FilterVlan1TypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the first VLAN Ethertype check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 14 }
|
|
|
|
acdSmapIPv4FilterVlan1Type OBJECT-TYPE
|
|
SYNTAX AcdFilterVlanType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Ethernet type."
|
|
DEFVAL { cvlan }
|
|
::= { acdSmapIPv4FilterEntry 15 }
|
|
|
|
acdSmapIPv4FilterVlan2PriorEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN priority check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 16 }
|
|
|
|
acdSmapIPv4FilterVlan2Prior OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN priority used to compare the incoming traffic.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 17 }
|
|
|
|
acdSmapIPv4FilterVlan2PriorLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Second VLAN priority last value, used in range operation.
|
|
Its value ranges from 0 to 7."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 18 }
|
|
|
|
acdSmapIPv4FilterVlan2PriorOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapIPv4FilterEntry 19 }
|
|
|
|
acdSmapIPv4FilterVlan2IdEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN ID check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 20 }
|
|
|
|
acdSmapIPv4FilterVlan2Id OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 21 }
|
|
|
|
acdSmapIPv4FilterVlan2IdLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN ID used to compare the incoming traffic.
|
|
Its value ranges from 0 to 4095."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 22 }
|
|
|
|
acdSmapIPv4FilterVlan2IdOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID operator. Valid operator types are: Greater than, Less than,
|
|
Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapIPv4FilterEntry 23 }
|
|
|
|
acdSmapIPv4FilterVlan2CfiEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN CFI check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 24 }
|
|
|
|
acdSmapIPv4FilterVlan2Cfi OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second VLAN CFI used to compare the incoming traffic.
|
|
Its value is 0 or 1."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 25 }
|
|
|
|
acdSmapIPv4FilterVlan2TypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the second VLAN Ethertype check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 26 }
|
|
|
|
acdSmapIPv4FilterVlan2Type OBJECT-TYPE
|
|
SYNTAX AcdFilterVlanType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Ethernet type."
|
|
DEFVAL { cvlan }
|
|
::= { acdSmapIPv4FilterEntry 27 }
|
|
|
|
|
|
acdSmapIPv4FilterSrcEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Source IP address check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 28 }
|
|
|
|
acdSmapIPv4FilterSrc OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address used to compare the incoming traffic."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { acdSmapIPv4FilterEntry 29 }
|
|
|
|
acdSmapIPv4FilterSrcMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source IP address mask used to compare the incoming traffic."
|
|
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
|
|
::= { acdSmapIPv4FilterEntry 30 }
|
|
|
|
acdSmapIPv4FilterDstEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Destination IP address check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 31 }
|
|
|
|
acdSmapIPv4FilterDst OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address used to compare the incoming traffic."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { acdSmapIPv4FilterEntry 32 }
|
|
|
|
acdSmapIPv4FilterDstMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address mask used to compare the
|
|
incoming traffic."
|
|
DEFVAL { 'FFFFFFFF'H } -- 255.255.255.255
|
|
::= { acdSmapIPv4FilterEntry 33 }
|
|
|
|
acdSmapIPv4FilterProtoEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the IP protocol check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 34 }
|
|
|
|
acdSmapIPv4FilterProto OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP protocol used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 35 }
|
|
|
|
acdSmapIPv4FilterTTLEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the TTL check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 36 }
|
|
|
|
acdSmapIPv4FilterTTL OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TTL used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 37 }
|
|
|
|
acdSmapIPv4FilterIHLEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the IP Header Length check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 38 }
|
|
|
|
acdSmapIPv4FilterIHL OBJECT-TYPE
|
|
SYNTAX Unsigned32 (5..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Header Length used to compare the incoming traffic.
|
|
Its value ranges from 5 to 15."
|
|
DEFVAL { 5 }
|
|
::= { acdSmapIPv4FilterEntry 39 }
|
|
|
|
acdSmapIPv4FilterIpCosEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Ethernet type check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 40 }
|
|
|
|
acdSmapIPv4FilterIpCosMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dscp(1),
|
|
pre(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID operator. Valid operator types are: Greater than, Less than,
|
|
Equal to or Range (inclusive range)."
|
|
DEFVAL { dscp }
|
|
::= { acdSmapIPv4FilterEntry 41 }
|
|
|
|
acdSmapIPv4FilterDscp OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 63."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 42 }
|
|
|
|
acdSmapIPv4FilterDscpLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSCP value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 63."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 43 }
|
|
|
|
acdSmapIPv4FilterDscpOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapIPv4FilterEntry 44 }
|
|
|
|
acdSmapIPv4FilterPre OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Precedence value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 3."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 45 }
|
|
|
|
acdSmapIPv4FilterPreLast OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Precedence value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 3."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 46 }
|
|
|
|
acdSmapIPv4FilterPreOper OBJECT-TYPE
|
|
SYNTAX AcdFilterOperator
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Precedence operator. Valid operator types are: Greater than,
|
|
Less than, Equal to or Range (inclusive range)."
|
|
DEFVAL { equalTo }
|
|
::= { acdSmapIPv4FilterEntry 47 }
|
|
|
|
acdSmapIPv4FilterECNEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ECN (Explicite Cogestion Notification) check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 48 }
|
|
|
|
acdSmapIPv4FilterECN OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..3)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ECN value used to compare the incoming traffic.
|
|
Its value ranges from 0 to 3."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 49 }
|
|
|
|
acdSmapIPv4FilterSrcPortEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the UDP/TCP Source port check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 50 }
|
|
|
|
acdSmapIPv4FilterSrcPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP/TCP Source Port used to compare the incoming traffic.
|
|
Its value ranges from 0 to 65535."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 51 }
|
|
|
|
acdSmapIPv4FilterDstPortEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the UDP/TCP Destination port check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 52 }
|
|
|
|
acdSmapIPv4FilterDstPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP/TCP Destination Port used to compare the incoming traffic.
|
|
Its value ranges from 0 to 65535."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 53 }
|
|
|
|
acdSmapIPv4FilterIcmpTypeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ICMP type check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 54 }
|
|
|
|
acdSmapIPv4FilterIcmpType OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICMP type used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 55 }
|
|
|
|
acdSmapIPv4FilterIcmpCodeEn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the ICMP code check."
|
|
DEFVAL { false }
|
|
::= { acdSmapIPv4FilterEntry 56 }
|
|
|
|
acdSmapIPv4FilterIcmpCode OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICMP code used to compare the incoming traffic.
|
|
Its value ranges from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapIPv4FilterEntry 57 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Filter Transaction ID Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapL2FilterTableLastChangeTid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the transaction ID of the last change of the acdSmapL2FilterTable
|
|
table. If this value is different since the last read this is indicate
|
|
a table change."
|
|
::= { acdFilterTableTid 1 }
|
|
|
|
acdSmapIPv4FilterTableLastChangeTid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the transaction ID of the last change of the acdSmapIPv4FilterTable
|
|
table. If this value is different since the last read this is indicate
|
|
a table change."
|
|
::= { acdFilterTableTid 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- ACD-FILTER-MIB Module - Conformance Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdFilterCompliances OBJECT IDENTIFIER ::= { acdFilterConformance 1 }
|
|
acdFilterGroups OBJECT IDENTIFIER ::= { acdFilterConformance 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Units of conformance
|
|
---------------------------------------------------------------------------
|
|
|
|
acdL2FilterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdL2FilterName,
|
|
acdL2FilterMacDstEn,
|
|
acdL2FilterMacDst,
|
|
acdL2FilterMacDstMask,
|
|
acdL2FilterMacSrcEn,
|
|
acdL2FilterMacSrc,
|
|
acdL2FilterMacSrcMask,
|
|
acdL2FilterEtypeEn,
|
|
acdL2FilterEtype,
|
|
acdL2FilterVlan1PriorEn,
|
|
acdL2FilterVlan1Prior,
|
|
acdL2FilterVlan1CfiEn,
|
|
acdL2FilterVlan1Cfi,
|
|
acdL2FilterVlan1IdEn,
|
|
acdL2FilterVlan1Id,
|
|
acdL2FilterVlan2PriorEn,
|
|
acdL2FilterVlan2Prior,
|
|
acdL2FilterVlan2CfiEn,
|
|
acdL2FilterVlan2Cfi,
|
|
acdL2FilterVlan2IdEn,
|
|
acdL2FilterVlan2Id,
|
|
acdL2FilterRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the L2 filter configuration Group."
|
|
::= { acdFilterGroups 1 }
|
|
|
|
|
|
acdIPv4FilterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdIPv4FilterName,
|
|
acdIPv4FilterSrcEn,
|
|
acdIPv4FilterSrc,
|
|
acdIPv4FilterSrcMask,
|
|
acdIPv4FilterDstEn,
|
|
acdIPv4FilterDst,
|
|
acdIPv4FilterDstMask,
|
|
acdIPv4FilterProtoEn,
|
|
acdIPv4FilterProto,
|
|
acdIPv4FilterTTLEn,
|
|
acdIPv4FilterTTL,
|
|
acdIPv4FilterIHLEn,
|
|
acdIPv4FilterIHL,
|
|
acdIPv4FilterDscpEn,
|
|
acdIPv4FilterDscp,
|
|
acdIPv4FilterECNEn,
|
|
acdIPv4FilterECN,
|
|
acdIPv4FilterSrcPortEn,
|
|
acdIPv4FilterSrcPort,
|
|
acdIPv4FilterDstPortEn,
|
|
acdIPv4FilterDstPort,
|
|
acdIPv4FilterIcmpTypeEn,
|
|
acdIPv4FilterIcmpType,
|
|
acdIPv4FilterIcmpCodeEn,
|
|
acdIPv4FilterIcmpCode,
|
|
acdIPv4FilterRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the IPv4 filter configuration Group."
|
|
::= { acdFilterGroups 2 }
|
|
|
|
acdSmapL2FilterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapL2FilterName,
|
|
acdSmapL2FilterRowStatus,
|
|
acdSmapL2FilterVlan1PriorEn,
|
|
acdSmapL2FilterVlan1Prior,
|
|
acdSmapL2FilterVlan1PriorLast,
|
|
acdSmapL2FilterVlan1PriorOper,
|
|
acdSmapL2FilterVlan1IdEn,
|
|
acdSmapL2FilterVlan1Id,
|
|
acdSmapL2FilterVlan1IdLast,
|
|
acdSmapL2FilterVlan1IdOper,
|
|
acdSmapL2FilterVlan1CfiEn,
|
|
acdSmapL2FilterVlan1Cfi,
|
|
acdSmapL2FilterVlan1TypeEn,
|
|
acdSmapL2FilterVlan1Type,
|
|
acdSmapL2FilterVlan2PriorEn,
|
|
acdSmapL2FilterVlan2Prior,
|
|
acdSmapL2FilterVlan2PriorLast,
|
|
acdSmapL2FilterVlan2PriorOper,
|
|
acdSmapL2FilterVlan2IdEn,
|
|
acdSmapL2FilterVlan2Id,
|
|
acdSmapL2FilterVlan2IdLast,
|
|
acdSmapL2FilterVlan2IdOper,
|
|
acdSmapL2FilterVlan2CfiEn,
|
|
acdSmapL2FilterVlan2Cfi,
|
|
acdSmapL2FilterVlan2TypeEn,
|
|
acdSmapL2FilterVlan2Type,
|
|
acdSmapL2FilterMacDstEn,
|
|
acdSmapL2FilterMacDst,
|
|
acdSmapL2FilterMacDstMask,
|
|
acdSmapL2FilterMacSrcEn,
|
|
acdSmapL2FilterMacSrc,
|
|
acdSmapL2FilterMacSrcMask,
|
|
acdSmapL2FilterEtypeEn,
|
|
acdSmapL2FilterEtype,
|
|
acdSmapL2FilterIpCosEn,
|
|
acdSmapL2FilterIpCosMode,
|
|
acdSmapL2FilterDscp,
|
|
acdSmapL2FilterDscpLast,
|
|
acdSmapL2FilterDscpOper,
|
|
acdSmapL2FilterPre,
|
|
acdSmapL2FilterPreLast,
|
|
acdSmapL2FilterPreOper
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the SMAP L2 filter configuration Group."
|
|
::= { acdFilterGroups 3 }
|
|
|
|
acdSmapIPv4FilterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapIPv4FilterName,
|
|
acdSmapIPv4FilterRowStatus,
|
|
acdSmapIPv4FilterVlan1PriorEn,
|
|
acdSmapIPv4FilterVlan1Prior,
|
|
acdSmapIPv4FilterVlan1PriorLast,
|
|
acdSmapIPv4FilterVlan1PriorOper,
|
|
acdSmapIPv4FilterVlan1IdEn,
|
|
acdSmapIPv4FilterVlan1Id,
|
|
acdSmapIPv4FilterVlan1IdLast,
|
|
acdSmapIPv4FilterVlan1IdOper,
|
|
acdSmapIPv4FilterVlan1CfiEn,
|
|
acdSmapIPv4FilterVlan1Cfi,
|
|
acdSmapIPv4FilterVlan1TypeEn,
|
|
acdSmapIPv4FilterVlan1Type,
|
|
acdSmapIPv4FilterVlan2PriorEn,
|
|
acdSmapIPv4FilterVlan2Prior,
|
|
acdSmapIPv4FilterVlan2PriorLast,
|
|
acdSmapIPv4FilterVlan2PriorOper,
|
|
acdSmapIPv4FilterVlan2IdEn,
|
|
acdSmapIPv4FilterVlan2Id,
|
|
acdSmapIPv4FilterVlan2IdLast,
|
|
acdSmapIPv4FilterVlan2IdOper,
|
|
acdSmapIPv4FilterVlan2CfiEn,
|
|
acdSmapIPv4FilterVlan2Cfi,
|
|
acdSmapIPv4FilterVlan2TypeEn,
|
|
acdSmapIPv4FilterVlan2Type,
|
|
acdSmapIPv4FilterSrcEn,
|
|
acdSmapIPv4FilterSrc,
|
|
acdSmapIPv4FilterSrcMask,
|
|
acdSmapIPv4FilterDstEn,
|
|
acdSmapIPv4FilterDst,
|
|
acdSmapIPv4FilterDstMask,
|
|
acdSmapIPv4FilterProtoEn,
|
|
acdSmapIPv4FilterProto,
|
|
acdSmapIPv4FilterTTLEn,
|
|
acdSmapIPv4FilterTTL,
|
|
acdSmapIPv4FilterIHLEn,
|
|
acdSmapIPv4FilterIHL,
|
|
acdSmapIPv4FilterIpCosEn,
|
|
acdSmapIPv4FilterIpCosMode,
|
|
acdSmapIPv4FilterDscp,
|
|
acdSmapIPv4FilterDscpLast,
|
|
acdSmapIPv4FilterDscpOper,
|
|
acdSmapIPv4FilterPre,
|
|
acdSmapIPv4FilterPreLast,
|
|
acdSmapIPv4FilterPreOper,
|
|
acdSmapIPv4FilterECNEn,
|
|
acdSmapIPv4FilterECN,
|
|
acdSmapIPv4FilterSrcPortEn,
|
|
acdSmapIPv4FilterSrcPort,
|
|
acdSmapIPv4FilterDstPortEn,
|
|
acdSmapIPv4FilterDstPort,
|
|
acdSmapIPv4FilterIcmpTypeEn,
|
|
acdSmapIPv4FilterIcmpType,
|
|
acdSmapIPv4FilterIcmpCodeEn,
|
|
acdSmapIPv4FilterIcmpCode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the SMAP IPv4 filter configuration Group."
|
|
::= { acdFilterGroups 4 }
|
|
|
|
acdFilterTidGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapL2FilterTableLastChangeTid,
|
|
acdSmapIPv4FilterTableLastChangeTid
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of scalars to monitior changes in tables."
|
|
::= { acdFilterGroups 5 }
|
|
|
|
acdFilterCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the ACD-FILTER-MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
acdL2FilterGroup,
|
|
acdIPv4FilterGroup,
|
|
acdSmapL2FilterGroup,
|
|
acdSmapIPv4FilterGroup,
|
|
acdFilterTidGroup
|
|
}
|
|
|
|
OBJECT acdL2FilterRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT acdIPv4FilterRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT acdSmapL2FilterRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT acdSmapIPv4FilterRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
::= { acdFilterCompliances 1 }
|
|
|
|
END
|