mibs/MIBS/adva/CM-COMMON-MIB

832 lines
28 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
CM-COMMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter64, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
fsp150cm
FROM ADVA-MIB;
cmCommonMIB MODULE-IDENTITY
LAST-UPDATED "202101270000Z"
ORGANIZATION "ADVA Optical Networking SE"
CONTACT-INFO
"Web URL: http://adva.com/
E-mail: support@adva.com
Postal: ADVA Optical Networking SE
Campus Martinsried
Fraunhoferstrasse 9a
82152 Martinsried/Munich
Germany
Phone: +49 089 89 06 65 0
Fax: +49 089 89 06 65 199 "
DESCRIPTION
"This module defines the Common MIB definitions used by
the FSP150CM and FSP150CC product lines.
Copyright (C) ADVA."
REVISION "202101270000Z"
DESCRIPTION
"
Notes from release 202005120000Z,
(1) Added TEXTUAL-CONVENTION: SfpIdentifierValue.
Notes from release 201908140000Z
(1) add xg120Proac product
Notes from release 201903110000Z
(1) add xg118ProacSH product
Notes from release 201809240000Z
(1) add xg118ProSH product
Notes from release 201807260000Z
(1) add ge102ProH and ge102ProEFMH product
Notes from release 201804190000Z
(1) add xg116ProH product
Notes from release 201611100000Z
(1) add xg116Pro product
(2) add xg120Pro subproduct
Notes from release 201607110000Z
(1) renamed FlowSecureState to FlowSecState since it cannot be moved from fsp150cm-connectguard.mib
Notes from release 201607080000Z
(1) moved FlowSecureState from fsp150cm-connectguard.mib
Notes from release 201502040000Z
(1) add xg210c subproduct
Notes from release 201412010000Z,
(1) Added new Textual Convention: Decimal32
Notes from release 201405210000Z,
(1) Added new EthernetMediaType literals:
- auto,
- none.
Notes from release 201311280000Z
(1) Added new Secondary State literal - mon-tx
Notes from release 201202150000Z (post GE20x R5.2.3CC)
(1) Added speed-auto-detect to EthernetPortSpeed
Notes from release 201108010000Z
(1) Post EG-X merge (R5.1.1)
Notes from release 201107080000Z
(1)Moved CmPmIntervalType from fsp150cm-perf.mib to this MIB
(2)Added interval-5min to TC CmPmIntervalType
Notes from release 201002120000Z
(1)New Textual Conventions : ClassOfServiceType and SignalDirectionType
(2)New product OIDs (used for sysOid) : ge201 and ge201se
Notes from release 200803160000Z,
(1)EthernetPortSpeed textual convention now has additional literals,
speed-auto-1000MB-full-master and speed-auto-1000MB-full-slave
(2)Added textual convention SfpMediaType
Notes from release 200803030000Z,
(1)MIB version ready for release FSP150CM."
::= {fsp150cm 1}
-- sub products in the F3 family
subproducts OBJECT IDENTIFIER ::= { cmCommonMIB 1 }
f3Capabilities OBJECT IDENTIFIER ::= { cmCommonMIB 2 }
-- NEMI HUB shelf product
nemihubshelf OBJECT IDENTIFIER ::= { subproducts 1 }
-- GE101 NID product
ge101 OBJECT IDENTIFIER ::= { subproducts 2 }
-- GE206 NID product
ge206 OBJECT IDENTIFIER ::= { subproducts 3 }
-- GE201 NID product
ge201 OBJECT IDENTIFIER ::= { subproducts 4 }
-- GE201-SE NID product (GE201 with SyncE)
ge201se OBJECT IDENTIFIER ::= { subproducts 5 }
-- GE206F NID product (GE206 with 6 Access Ports with SFPs)
ge206f OBJECT IDENTIFIER ::= { subproducts 6 }
-- CMAGG NID product
cmagg OBJECT IDENTIFIER ::= { subproducts 7 }
-- GE112 NID product (GE112 with 2 Access Ports with SFPs)
ge112 OBJECT IDENTIFIER ::= { subproducts 8 }
-- GE114 NID product (GE114 with 4 Access Ports with SFPs)
ge114 OBJECT IDENTIFIER ::= { subproducts 9 }
-- GE206v NID product (GE206 with 6 Access Ports w SFPs, expansion cards)
ge206v OBJECT IDENTIFIER ::= { subproducts 10 }
-- XG210 NID product (10G NID with expansion cards)
xg210 OBJECT IDENTIFIER ::= { subproducts 11 }
-- T1804 NID product (T1804 with 4 Access Ports with SFPs)
t1804 OBJECT IDENTIFIER ::= { subproducts 12 }
-- T3204 NID product (T3204 with 4 Access Ports with SFPs)
t3204 OBJECT IDENTIFIER ::= { subproducts 13 }
-- SyncProbe product
gesyncprobe OBJECT IDENTIFIER ::= { subproducts 14 }
-- GE114H NID product (GE114H with 4 Access Ports with SFPs)
ge114H OBJECT IDENTIFIER ::= { subproducts 15 }
-- GE114PH NID product (GE114PH with 4 Access Ports with SFPs)
ge114PH OBJECT IDENTIFIER ::= { subproducts 16 }
-- GE114S NID product (GE114S with 4 Access Ports with SFPs)
ge114S OBJECT IDENTIFIER ::= { subproducts 17 }
-- GE114SH NID product (GE114SH with 4 Access Ports with SFPs)
ge114SH OBJECT IDENTIFIER ::= { subproducts 18 }
-- SH1PCS NID product (10G NID with expansion cards)
sh1pcs OBJECT IDENTIFIER ::= { subproducts 19 }
-- GE112Pro NID product (GE112Pro with 2 Access Ports with SFPs)
ge112Pro OBJECT IDENTIFIER ::= { subproducts 20 }
-- GE112ProM NID product (GE112ProM with 2 Access Ports with SFPs)
ge112ProM OBJECT IDENTIFIER ::= { subproducts 21 }
-- GE114Pro NID product (GE114Pro with 4 Access Ports with SFPs)
ge114Pro OBJECT IDENTIFIER ::= { subproducts 22 }
-- GE114ProC NID product (GE114ProC with 4 Access Ports with SFPs)
ge114ProC OBJECT IDENTIFIER ::= { subproducts 23 }
-- GE114ProS NID product (GE114ProSH with 4 Access Ports with SFPs)
ge114ProSH OBJECT IDENTIFIER ::= { subproducts 24 }
-- GE114ProCS NID product (GE114ProCSH with 4 Access Ports with SFPs)
ge114ProCSH OBJECT IDENTIFIER ::= { subproducts 25 }
-- GE114ProHE NID product (GE114ProHE with 4 Access Ports with SFPs)
ge114ProHE OBJECT IDENTIFIER ::= { subproducts 26 }
-- MACSEC NID product
xg210c OBJECT IDENTIFIER ::= { subproducts 27 }
-- GE112ProH NID product (GE112ProH with 2 Access Ports with SFPs)
ge112ProH OBJECT IDENTIFIER ::= { subproducts 28 }
-- GE114G NID product (GE114G with 2 Access Ports with SFPs)
ge114G OBJECT IDENTIFIER ::= { subproducts 29 }
-- GE114ProVMH NID product (GE114ProVMH with 4 Access Ports with SFPs)
ge114ProVMH OBJECT IDENTIFIER ::= { subproducts 30 }
-- GE114ProVMCH NID product (GE114ProVMCH with 4 Access Ports with SFPs)
ge114ProVMCH OBJECT IDENTIFIER ::= { subproducts 31 }
-- GE114ProVMCSH NID product (GE114ProVMCSH with 4 Access Ports with SFPs)
ge114ProVMCSH OBJECT IDENTIFIER ::= { subproducts 32 }
-- GE112ProVM NID product (GE112ProVM with 2 Access Ports with SFPs)
ge112ProVM OBJECT IDENTIFIER ::= { subproducts 33 }
-- GE101PRO NID product
ge101Pro OBJECT IDENTIFIER ::= { subproducts 34 }
-- GO102PROS NID product
go102ProS OBJECT IDENTIFIER ::= { subproducts 35 }
-- GO102PROSP NID product
go102ProSP OBJECT IDENTIFIER ::= { subproducts 36 }
-- CX101PRO30A NID product
cx101Pro30A OBJECT IDENTIFIER ::= { subproducts 37 }
-- CX102PRO30A NID product
cx102Pro30A OBJECT IDENTIFIER ::= { subproducts 38 }
-- XG116Pro NID product
xg116Pro OBJECT IDENTIFIER ::= { subproducts 39 }
-- XG120Pro NID product
xg120Pro OBJECT IDENTIFIER ::= { subproducts 40 }
-- XG116ProH NID product
xg116ProH OBJECT IDENTIFIER ::= { subproducts 41 }
-- ge102ProH NID product
ge102ProH OBJECT IDENTIFIER ::= { subproducts 42 }
-- ge102ProEFMH NID product
ge102ProEFMH OBJECT IDENTIFIER ::= { subproducts 43 }
-- GO102PROSM NID product
go102ProSM OBJECT IDENTIFIER ::= { subproducts 44 }
-- XG118ProSH NID product
xg118ProSH OBJECT IDENTIFIER ::= { subproducts 45 }
-- XG118ProSH NID product
xg118ProacSH OBJECT IDENTIFIER ::= { subproducts 46 }
-- GE114ProVMSH NID product (GE114ProVMSH with 4 Access Ports with SFPs)
ge114ProVMSH OBJECT IDENTIFIER ::= { subproducts 47 }
-- GE104 NID product (GE104 with 4 Access Ports with SFPs)
ge104 OBJECT IDENTIFIER ::= { subproducts 48 }
-- XG120ProSH NID product
xg120ProSH OBJECT IDENTIFIER ::= { subproducts 49 }
--
-- Textual Conventions
--
PortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for types of ports.
eth-access - Ethernet Access Port,
eth-network - Ethernet Network Port."
SYNTAX INTEGER {
eth-access (1),
eth-network (2)
}
TrafficDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for direction of traffic.
a2n - Access to Network direction,
n2a - Network to Access direction,
ingress - Entering system direction,
egress - Away from system direction,
n2n - Network to Network direction."
SYNTAX INTEGER {
a2n (1),
n2a (2),
ingress (3),
egress (4),
n2n (5)
}
VlanId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual Convention for the Vlan Id."
SYNTAX INTEGER (0..4095)
VlanPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual Convention for the Vlan Priority."
SYNTAX INTEGER (0..7)
VlanTagType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual Convention for the Type of VLAN Tag."
SYNTAX INTEGER {
inner-vlantag (1),
outer-vlantag (2),
n2a-priorityMapping(3),
mplsLabel(4),
vcLabel(5),
encapOuterVlanTag(6)
}
AdminState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Administrative State used for FSP150CM entities.
in-service - represents normal, in-service, traffic passing
state of the Entity;
management - represents the traffic passing state,
however, alarms are not reported
maintenance- represents the mandatory state of operating
loopbacks, ECPA test as well as Etherjack
diagnosis operations, alarms are not reported
disabled - represents the disabled state, user traffic is not passed,
management traffic is passed, alarms are not reported
unassigned - represents the disabled state,
traffic(user or management) is not passed,
alarms are not monitored.
monitored - represents the monitored state.
Used for retrieving performance monitoring on entity, but entity can't be used for normal operation.
Alarms are reported "
SYNTAX INTEGER {
in-service (1),
management (2),
maintenance(3),
disabled (4),
unassigned (5),
monitored (6)
}
OperationalState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational State used for FSP150CM entities.
normal - represents operational state UP,
outage - represents operational state DOWN."
SYNTAX INTEGER {
normal (1),
outage (2)
}
SecondaryState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Secondary state used for FSP150CM entities.
active - Active,
automaticinservice - Automatic In Service,
facilityfailure - Facility Failure,
fault - Fault,
loopback - Loopback,
maintenance - Maintenance,
mismatchedeqpt - Mismatched Equipment,
standbyhot - Standby Hot,
supportingentityoutage - Supporting Entity Outage,
unassigned - Unassigned,
unequipped - Unequipped,
disabled - Disabled,
forcedoffline - Forced offline,
initializing - Initializing,
prtcl - Protocol,
blckd - Blocked,
mon-tx - Monitor TX,
mir-rx - Mirror RX,
cema - CEMA,
lkdo - LKDO"
SYNTAX BITS {
not-applicable (0),
active (1),
automaticinservice (2),
facilityfailure (3),
fault (4),
loopback (5),
maintenance (6),
mismatchedeqpt (7),
standbyhot (8),
supportingentityoutage (9),
unassigned (10),
unequipped (11),
disabled (12),
forcedoffline (13),
initializing(14),
prtcl(15),
blckd(16),
mon-tx(17),
mir-rx(18),
cema(19),
lkdo(20),
nomber(21)
}
EthernetPortSpeed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Ethernet Port Speed.
speed-unknown : speed unknown
speed-10MB-full : fixed speed 10MB full duplex
speed-10MB-half : fixed speed 10MB half duplex
speed-100MB-full : fixed speed 100MB full duplex
speed-100MB-half : fixed speed 100MB half duplex
speed-1000MB-full : fixed speed 1000MB full duplex
speed-1000MB-half : fixed speed 1000MB half duplex
speed-auto : Auto negotiation, advertise all speeds
speed-auto-10MB-full : Auto negotiation, advertise 10MB full duplex
speed-auto-10MB-half : Auto negotiation, advertise 10MB half duplex
speed-auto-100MB-full: Auto negotiation, advertise 100MB full duplex
speed-auto-100MB-half: Auto negotiation, advertise 100MB half duplex
speed-auto-1000MB-full: Auto negotiation, advertise 1000MB full duplex
speed-auto-1000MB-half: Auto negotiation, advertise 1000MB half duplex
speed-negotiating : Auto negotiating, transient state
speed-auto-1000MB-full-master : Auto negotiation, advertise 1000MB full duplex, sync master
speed-auto-1000MB-full-slave : Auto negotiation, advertise 1000MB full duplex, sync slave
speed-none : Used to denote speed, when negotiating
speed-auto-1000MB-full-master-preferred : Auto negotiation,
advertise 1000MB full duplex, preferred sync master
speed-auto-1000MB-full-slave-preferred : Auto negotiation,
advertise 1000MB full duplex, preferred sync slave
speed-10G-full : fixed speed 10G full duplex
speed-auto-detect : Auto detect speed; iterate through available speeds and test
the link with remote end - if link is up at given speed, this speed is configured
."
SYNTAX INTEGER {
speed-unknown (0),
speed-10MB-full (1),
speed-10MB-half (2),
speed-100MB-full(3),
speed-100MB-half(4),
speed-1000MB-full(5),
speed-1000MB-half(6),
speed-auto (7),
speed-auto-10MB-full(8),
speed-auto-10MB-half(9),
speed-auto-100MB-full(10),
speed-auto-100MB-half(11),
speed-auto-1000MB-full(12),
speed-auto-1000MB-half(13),
speed-negotiating(14),
speed-auto-1000MB-full-master(15),
speed-auto-1000MB-full-slave(16),
speed-none(17),
speed-auto-1000MB-full-master-preferred(18),
speed-auto-1000MB-full-slave-preferred(19),
speed-10G-full (20),
speed-auto-detect (21)
}
EthernetMediaType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Ethernet Port Media Type."
SYNTAX INTEGER {
not-applicable(0),
copper(1),
fiber(2),
coppersfp(3), --enumeration added in R4.4CC
auto(4),
none(5),
xdsl(6),
vmServerBackplane(7)
}
PerfCounter64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type represents a non-negative 64-bit integer. The initial
value of this integer will be 0. It will increment with time,
however, the value will revert back to 0 when the time period
for history interval elapses. Typically, this will be noticed
at 15minute intervals and 1 day intervals. Only the rollover
interval periods will keep counting to a maximum 64-bit value
and will wrap to 0 when this occurs."
SYNTAX Counter64
PerfCounter32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type represents a non-negative 32-bit integer. The initial
value of this integer will be 0. It will increment with time,
however, the value will revert back to 0 when the time period
for history interval elapses. Typically, this will be noticed
at 15minute intervals and 1 day intervals. Only the rollover
interval periods will keep counting to a maximum 32-bit value
and will wrap to 0 when this occurs."
SYNTAX Counter32
IpVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type allows choice of IPv4 or IPv6 address specification."
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
IpPriorityMapMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type allows choice of IP Priority Mapping Mode."
SYNTAX INTEGER {
not-applicable(0),
none(1),
priomap-tos(2),
priomap-dscp(3)
}
PriorityMapMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type allows choice of Priority Mapping Mode."
SYNTAX INTEGER {
priomap-none(1),
priomap-tos(2),
priomap-dscp(3),
priomap-8021p(4), -- Outer
priomap-8021p-inner(5),
priomap-exp(6),
priomap-exp-inner(7)
}
SfpConnectorValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This lists the SFP connector values."
SYNTAX INTEGER {
not-applicable (0),
unknown (1),
sc (2),
fcs1cu (3),
fcs2cu (4),
bnc-tnc (5),
fccoaxhdr (6),
fjack (7),
lc (8),
mt-rj (9),
mu (10),
sg (11),
optpigtail (12),
hssdc (13),
cupigtail (14),
vendorspecific (15),
rj45(16)
}
SfpIdentifierValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This lists the SFP identifier values."
SYNTAX INTEGER {
notApplicable(0),
unknown(1),
gbic(2),
modsol(3),
sfp(4),
xbi300pin(5),
xenpak(6),
xfp(7),
xff(8),
xfpE(9),
xpak(10),
x2(11),
vendorSpecific(12)
}
RestartType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Restart Type used across all card types."
SYNTAX INTEGER {
not-applicable(0),
warm-start (1),
cold-start (2),
boot-maintenance (3),
boot-normal (4),
boot-pxe (5)
}
SfpMediaType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the SFP Media Type."
SYNTAX INTEGER {
not-applicable(0),
singlemode(1),
multimode(2),
multimode62-5(3),
copper(4)
}
ScheduleType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Schedule Type of a scheduled operation."
SYNTAX INTEGER {
periodic(1),
one-shot(2)
}
SchedActivityStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Scheduled Group Activity Status."
SYNTAX INTEGER {
initial(1),
active(2),
suspended(3),
completed(4)
}
SchedActivityAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Scheduled Activity Action."
SYNTAX INTEGER {
not-applicable(0),
suspend(1),
resume(2)
}
MepDestinationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Destination MEP Types."
SYNTAX INTEGER {
not-applicable(0),
mepid(1),
macaddress(2)
}
ClassOfServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Class of Service Types."
SYNTAX INTEGER {
cos-not-applicable(0),
cos-zero(1),
cos-one(2),
cos-two(3),
cos-three(4),
cos-four(5),
cos-five(6),
cos-six(7),
cos-seven(8)
}
SignalDirectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Signal Direction Type."
SYNTAX INTEGER {
input(1),
output(2)
}
AfpTagControl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Afp Tag Control."
SYNTAX INTEGER {
ctag(1),
stag(2),
both(3)
}
CmP2PFlowType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Agg Flow Type,incluing e-line."
SYNTAX INTEGER {
eline (1)
}
CmTrafficACLPriorityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Traffic acl priority type, including tos, dscp and traffic class."
SYNTAX INTEGER {
notApplicable(0),
acl-tos(1),
acl-dscp(2)
}
CmTrafficAclFilterActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Access Control List
permit - Permit access,
deny - Deny access."
SYNTAX INTEGER {
permit (1),
deny (2)
}
CmTrafficAclFilterType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Traffic acl filter type, including
MAC
IPV4
IPV6."
SYNTAX INTEGER {
mac (1),
ipv4 (2),
ipv6 (3)
}
CmTrafficAclProtocolType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Traffic acl protocol type, including
tcp
udp."
SYNTAX INTEGER {
notApplicable(0),
tcp (1),
udp (2)
}
VlanEthertype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Vlan Ether Type,
cvlan,
svlan."
SYNTAX INTEGER {
cvlan (1),
svlan (2)
}
CmPmBinAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Provides ability to clear the contents of PM bin."
SYNTAX INTEGER {
not-applicable(0),
clear (1)
}
CmPmIntervalType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the Performance Monitoring Interval Type."
SYNTAX INTEGER {
interval-15min (1),
interval-1day (2),
rollover (3),
interval-5min (4)
}
TDMFrequencySourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for TDM Frequency Source
loopTiming,
systemTiming,
lineTiming"
SYNTAX INTEGER {
notApplicable(0),
loopTiming(1),
systemTiming(2),
lineTiming(3)
}
F3DisplayString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2047a"
STATUS current
DESCRIPTION
"This object is similar with DisplayString,
and the difference is its length is 2047.
Any object defined using this syntax may not exceed 2047
characters in length."
SYNTAX OCTET STRING (SIZE (0..2047))
Decimal32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value is encoded in a Decimal32 interchange format.
The decimal value should be calculated as follows:
(-1)^sign x 10^(exponent-101) x mantissa
The individual components of the equation are coded in two different
formats depending on the range of the mantissa.
Format A:
Second and third bits can be: 00, 01 or 10
s EEeeeeee mmmmmmm mmmmmmmm mmmmmmmm
sign: coded on a 1 bit - s
exponent: coded on 8 bits - EEeeeeee
where EE: 00, 01 or 10
mantissa: coded on 24 bits - 0mmmmmmm mmmmmmmm mmmmmmmm
Format B:
For a larger mantissa.
Second and third bits are: 11
s 11 EEeeeeee mmmmm mmmmmmmm mmmmmmmm
sign: coded on a 1 bit - s
exponent: coded on 8 bits - EEeeeeee
where EE: 00, 01 or 10
mantissa: coded on 24 bits - 100mmmmm mmmmmmmm mmmmmmmm"
SYNTAX Unsigned32
UserInterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes used user interface type."
SYNTAX INTEGER {
cli (1),
gui (2),
netconf (3),
snmp (4)
}
-- same as FlowSecureState. Duplicated to avoid cyclic dependency
FlowSecState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Flow secure state."
SYNTAX INTEGER {
secureNormal (1),
secureBlocked (2),
unsecureNormal (3),
unsecureBlocked (4)
}
UsbOperationalMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Types of usb operational mode."
SYNTAX INTEGER {
cellular-modem(1),
srv-access (2),
nte-access (3)
}
END