mibs/MIBS/adva/CM-REDUNDANCY-MIB

352 lines
12 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
CM-REDUNDANCY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks, Integer32
FROM SNMPv2-SMI
DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
fsp150cm
FROM ADVA-MIB
PhysicalIndex
FROM ENTITY-MIB
neIndex, CardType
FROM CM-ENTITY-MIB;
cmRedundancyMIB MODULE-IDENTITY
LAST-UPDATED "200902240000Z"
ORGANIZATION "ADVA Optical Networking"
CONTACT-INFO
" Raghav Trivedi
ADVA Optical Networking, Inc.
Tel: +1 972 759-1239
E-mail: rtrivedi@advaoptical.com
Postal: 2301 N. Greenville Ave. #300
Richardson, TX USA 75082"
DESCRIPTION
"This module defines the Redundancy MIB definitions used by
the FSP150CM product line.
Copyright (C) ADVA Optical Networking."
REVISION "200902240000Z"
DESCRIPTION
"Notes from release 200902240000Z,
(1)MIB version ready for release FSP150CM 5.1."
::= {fsp150cm 15}
--
-- OID definitions
--
cmRedundancyObjects OBJECT IDENTIFIER ::= {cmRedundancyMIB 1}
cmRedundancyNotifications OBJECT IDENTIFIER ::= {cmRedundancyMIB 2}
cmRedundancyConformance OBJECT IDENTIFIER ::= {cmRedundancyMIB 3}
--
-- Textual Conventions
--
CmRedundancyArch ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Redundancy Architecture.
loadbalance,
activestandby"
SYNTAX INTEGER {
loadbalance (1),
activestandby (2)
}
CmRedundancyStandbyMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Redundancy Mode.
coldStandby(1)
A method of redundancy in which the secondary (i.e., backup) system is
only called upon when the primary system fails. The system on cold standby
receives scheduled data backups, but less frequently than a warm standby.
warmStandby(2)
A method of redundancy in which the secondary (i.e., backup) system runs
in the background of the primary system. Data is mirrored to the secondary
server at regular intervals, which means that there are times when both
servers do not contain the exact same data..
hotStandby(3)
A method of redundancy in which the primary and secondary (i.e., backup)
systems run simultaneously. The data is mirrored to the secondary server
in real time so that both systems contain identical information.
"
SYNTAX INTEGER {
cold (1),
warm (2),
hot (3)
}
CmRedundancyState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Redundancy State."
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
CmRedundancySyncStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for synchronization status."
SYNTAX INTEGER {
none (1),
out-of-synchronize (2),
bulk-synchronize (3),
incremental-synchronize (4)
}
CmRedundancySwitchOverReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Redundancy Last Switch Over Reason."
SYNTAX INTEGER {
unknown (1),
latestUpdatedData (2),
userTrigger (3),
cardReset (4),
cardRemoval (5),
softwareFailure (6),
hardwareFailure (7)
}
CmRedundancySyncMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Redundancy Synchronization Mode.
automatically - Active card automatically propagates config data to its peer
manually - User needs to manually copy config data to standby card and apply it.
"
SYNTAX INTEGER {
automatically (1),
manually(2)
}
CmRedundancyAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for User initiated Redundancy Switch Action.
force - Force Switch from Active Card
manual - Manual Switch from Active Card
releasefore - Release Force switch from Active Card
"
SYNTAX INTEGER {
notApplicable (0),
force (1),
manual (2),
releaseforce (3)
}
CmRedundancyUnitState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for Redundancy Unit State.
none - no state
normal - normal state
maintenance - maintenance state
faultisolation - faultisolation
"
SYNTAX INTEGER {
none (1),
normal (2),
maintenance(3),
faultisolation(4),
lock(5),
extracted(6),
init(7),
stanbdby(8)
}
--
-- Entity Redundancy Group Table
--
cmRedundancyGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmRedundancyGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the Redundancy Groups.
"
::= { cmRedundancyObjects 1 }
cmRedundancyGroupEntry OBJECT-TYPE
SYNTAX CmRedundancyGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
Redundancy Group."
INDEX { neIndex, cmRedundancyGroupIndex }
::= { cmRedundancyGroupTable 1 }
CmRedundancyGroupEntry ::= SEQUENCE {
cmRedundancyGroupIndex Integer32,
cmRedundancyGroupUserLabel DisplayString,
cmRedundancyGroupType CardType,
cmRedundancyGroupSyncEnabled TruthValue,
cmRedundancyGroupActiveCard VariablePointer,
cmRedundancyGroupActiveCardState CmRedundancyUnitState,
cmRedundancyGroupStandbyCard VariablePointer,
cmRedundancyGroupStandbyCardState CmRedundancyUnitState,
cmRedundancyGroupLastSwitchOverTime TimeTicks,
cmRedundancyGroupLastSwitchOverReason CmRedundancySwitchOverReason,
cmRedundancyGroupState CmRedundancyState,
cmRedundancyGroupSyncStatus CmRedundancySyncStatus,
cmRedundancyGroupAction CmRedundancyAction
}
cmRedundancyGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index value associated with the Redundancy Group."
::= { cmRedundancyGroupEntry 1 }
cmRedundancyGroupUserLabel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User Label associated with the Reduandancy Group."
::= { cmRedundancyGroupEntry 2 }
cmRedundancyGroupType OBJECT-TYPE
SYNTAX CardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of card who belongs to the Redundancy Group."
::= { cmRedundancyGroupEntry 3 }
cmRedundancyGroupSyncEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The way of the synchronization in Redundancy Group."
::= { cmRedundancyGroupEntry 4 }
cmRedundancyGroupActiveCard OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The corresponding OID of the Active/Primary Card in the Redundancy Group."
::= { cmRedundancyGroupEntry 5 }
cmRedundancyGroupActiveCardState OBJECT-TYPE
SYNTAX CmRedundancyUnitState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Active Card in the Redundancy Group."
::= { cmRedundancyGroupEntry 6 }
cmRedundancyGroupStandbyCard OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The corresponding OID of the Standby/Secondary Card in the Redundancy Group."
::= { cmRedundancyGroupEntry 7 }
cmRedundancyGroupStandbyCardState OBJECT-TYPE
SYNTAX CmRedundancyUnitState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Standby Card in the Redundancy Group."
::= { cmRedundancyGroupEntry 8 }
cmRedundancyGroupLastSwitchOverTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when last switch over occurred."
::= { cmRedundancyGroupEntry 9 }
cmRedundancyGroupLastSwitchOverReason OBJECT-TYPE
SYNTAX CmRedundancySwitchOverReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for last switch over in the Redundancy Group."
::= { cmRedundancyGroupEntry 10 }
cmRedundancyGroupState OBJECT-TYPE
SYNTAX CmRedundancyState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Redundancy Group."
::= { cmRedundancyGroupEntry 11 }
cmRedundancyGroupSyncStatus OBJECT-TYPE
SYNTAX CmRedundancySyncStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current sync state of the Redundancy Group."
::= { cmRedundancyGroupEntry 12 }
cmRedundancyGroupAction OBJECT-TYPE
SYNTAX CmRedundancyAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User initiated switch action of the Redundancy Group."
::= { cmRedundancyGroupEntry 13 }
--
-- Notification
--
--
-- Conformance
--
cmRedundancyCompliances OBJECT IDENTIFIER ::= {cmRedundancyConformance 1}
cmRedundancyGroups OBJECT IDENTIFIER ::= {cmRedundancyConformance 2}
cmRedundancyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the CM Redundancy
group."
MODULE -- this module
MANDATORY-GROUPS {
cmRedundancyObjectGroup
}
::= { cmRedundancyCompliances 1 }
cmRedundancyObjectGroup OBJECT-GROUP
OBJECTS {
cmRedundancyGroupIndex, cmRedundancyGroupUserLabel, cmRedundancyGroupType, cmRedundancyGroupSyncEnabled,
cmRedundancyGroupActiveCard, cmRedundancyGroupActiveCardState, cmRedundancyGroupStandbyCard,
cmRedundancyGroupStandbyCardState, cmRedundancyGroupLastSwitchOverTime, cmRedundancyGroupLastSwitchOverReason,
cmRedundancyGroupState, cmRedundancyGroupSyncStatus, cmRedundancyGroupAction
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the CM Redundancy Object group."
::= { cmRedundancyGroups 1 }
END