mibs/MIBS/adva/F3-PWE3-MIB

1463 lines
49 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
F3-PWE3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress, Integer32, Unsigned32, Counter64
FROM SNMPv2-SMI
DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,
MacAddress, DateAndTime, TEXTUAL-CONVENTION
FROM SNMPv2-TC
neIndex, shelfIndex, slotIndex
FROM CM-ENTITY-MIB
cmEthernetAccPortIndex, cmEthernetNetPortIndex
FROM CM-FACILITY-MIB
IpVersion, CmPmIntervalType, CmPmBinAction, VlanId, VlanPriority
FROM CM-COMMON-MIB
fsp150cm
FROM ADVA-MIB
AdminState, OperationalState, SecondaryState, PerfCounter64,
IpPriorityMapMode FROM CM-COMMON-MIB;
f3Pwe3MIB MODULE-IDENTITY
LAST-UPDATED "201204030000Z"
ORGANIZATION "ADVA Optical Networking"
CONTACT-INFO
" Raghav Trivedi
ADVA Optical Networking, Inc.
Tel: +1 972 759-1239
E-mail: rtrivedi@advaoptical.com
Postal: 2301 N. Greenville Ave. #300
Richardson, TX USA 75082"
DESCRIPTION
"This module provides the F3 Pseudo Wire definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking."
REVISION "201204030000Z"
DESCRIPTION
"
Notes from release 201204030000Z
(i)Initial version
."
::= {fsp150cm 19}
--
-- OID definitions
--
f3Pwe3ConfigObjects OBJECT IDENTIFIER ::= {f3Pwe3MIB 1}
f3Pwe3PerformanceObjects OBJECT IDENTIFIER ::= {f3Pwe3MIB 2}
f3Pwe3PerformanceNotifications OBJECT IDENTIFIER ::= {f3Pwe3MIB 3}
f3Pwe3Conformance OBJECT IDENTIFIER ::= {f3Pwe3MIB 4}
--
-- Textual Conventions
--
PWE3SatopDiscoveryType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for PWE3 SATop Discovery Type."
SYNTAX INTEGER {
dynamic(1),
static(2)
}
PWE3SatopEncapsulationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for PWE3 SATop Encapsulation Type."
SYNTAX INTEGER {
vlan-one-mpls-label(1),
vlan-two-mpls-label(2),
novlan-two-mpls-label(3)
}
PWE3SatopRTPTSUpdateFreqType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for PWE3 SATop RTP Update Frequency."
SYNTAX INTEGER {
freq-8kHz (1),
freq-16kHz (2),
freq-32kHz (3),
freq-64kHz (4),
freq-128kHz (5),
freq-256kHz (6),
freq-512kHz (7),
freq-1024kHz (8)
}
PWE3SatopTransportMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumerations for PWE3 SATop Transport Mode."
SYNTAX INTEGER {
satop-e1 (1),
satop-t1 (2),
satop-octetalignt1 (3)
}
MplsLabel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Definition of MPLS Label.
The bits in network order (left-to-right) are,
Label(20-bits):QOS(3-bits):Bottom-of-Stack(1-bit):TTL(8-bits)
These constitute the 32-bit unsigned integer."
SYNTAX Unsigned32
--
-- CONFIGURATION
--
--
-- PWE3 Profiles
--
-- PWE3 Idle Pattern Profile
--
f3Pwe3IdlePatternProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3IdlePatternProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 Idle Pattern
Profile entities."
::= { f3Pwe3ConfigObjects 1 }
f3Pwe3IdlePatternProfileEntry OBJECT-TYPE
SYNTAX F3Pwe3IdlePatternProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 Idle Pattern Profile Entity. These profiles are used
by PWE3 SAToP entities."
INDEX { f3Pwe3IdlePatternProfileIndex }
::= { f3Pwe3IdlePatternProfileTable 1 }
F3Pwe3IdlePatternProfileEntry ::= SEQUENCE {
f3Pwe3IdlePatternProfileIndex Integer32,
f3Pwe3IdlePatternProfileByte Unsigned32
}
f3Pwe3IdlePatternProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the PWE3 Idle Pattern Profile."
::= { f3Pwe3IdlePatternProfileEntry 1 }
f3Pwe3IdlePatternProfileByte OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
Idle Pattern Profile information."
::= { f3Pwe3IdlePatternProfileEntry 2 }
--
--
-- PWE3 Resync Profile
--
f3Pwe3ResyncProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3ResyncProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 Resync Profile entities."
::= { f3Pwe3ConfigObjects 2 }
f3Pwe3ResyncProfileEntry OBJECT-TYPE
SYNTAX F3Pwe3ResyncProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 Resync Profile Entity. These profiles are used
by PWE3 SAToP entities."
INDEX { f3Pwe3ResyncProfileIndex }
::= { f3Pwe3ResyncProfileTable 1 }
F3Pwe3ResyncProfileEntry ::= SEQUENCE {
f3Pwe3ResyncProfileIndex Integer32,
f3Pwe3ResyncProfileIncreaseFactor Unsigned32,
f3Pwe3ResyncProfileDecreaseFactor Unsigned32,
f3Pwe3ResyncProfileResyncThreshold Unsigned32
}
f3Pwe3ResyncProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the PWE3 Resync Profile."
::= { f3Pwe3ResyncProfileEntry 1 }
f3Pwe3ResyncProfileIncreaseFactor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Resync Profile Increase Factor. This is used to define
the fill rate of the leaky bucket algorithm associated with the
Resync mechanism."
::= { f3Pwe3ResyncProfileEntry 2 }
f3Pwe3ResyncProfileDecreaseFactor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Resync Profile Decrease Factor. This is used to define
the leak rate for the leaky bucket algorithm associated with
the Resync mechanism."
::= { f3Pwe3ResyncProfileEntry 3 }
f3Pwe3ResyncProfileResyncThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Resync Profile Resync Threshold. This is the threshold value
at which point the pseudo-wire connection is deemed out of
synchronization state."
::= { f3Pwe3ResyncProfileEntry 4 }
--
--
-- PWE3 Loopback Profile
--
f3Pwe3LoopbackProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3LoopbackProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 Loopback Profile entities."
::= { f3Pwe3ConfigObjects 3 }
f3Pwe3LoopbackProfileEntry OBJECT-TYPE
SYNTAX F3Pwe3LoopbackProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 Loopback Profile Entity. These profiles are used
by PWE3 T1/E1 interfaces."
INDEX { f3Pwe3LoopbackProfileIndex }
::= { f3Pwe3LoopbackProfileTable 1 }
F3Pwe3LoopbackProfileEntry ::= SEQUENCE {
f3Pwe3LoopbackProfileIndex Integer32,
f3Pwe3LoopbackProfileLength Unsigned32,
f3Pwe3LoopbackProfilePattern Unsigned32,
f3Pwe3LoopbackProfileRepeatTime Unsigned32,
f3Pwe3LoopbackProfileClearLength Unsigned32,
f3Pwe3LoopbackProfileClearPattern Unsigned32
}
f3Pwe3LoopbackProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the PWE3 Loopback Profile."
::= { f3Pwe3LoopbackProfileEntry 1 }
f3Pwe3LoopbackProfileLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Loopback Length."
::= { f3Pwe3LoopbackProfileEntry 2 }
f3Pwe3LoopbackProfilePattern OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Loopback Pattern."
::= { f3Pwe3LoopbackProfileEntry 3 }
f3Pwe3LoopbackProfileRepeatTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Loopback Profile Repeat Time (Duration)."
::= { f3Pwe3LoopbackProfileEntry 4 }
f3Pwe3LoopbackProfileClearLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
Loopback PWE3 Clear Length."
::= { f3Pwe3LoopbackProfileEntry 5 }
f3Pwe3LoopbackProfileClearPattern OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
PWE3 Loopback Clear Pattern."
::= { f3Pwe3LoopbackProfileEntry 6 }
--
--
-- PWE3 Loss Profile
--
f3Pwe3LossProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3LossProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 Loss Profile entities."
::= { f3Pwe3ConfigObjects 4 }
f3Pwe3LossProfileEntry OBJECT-TYPE
SYNTAX F3Pwe3LossProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 Loss Profile Entity. These profiles are used
by PWE3 SAToP entities."
INDEX { f3Pwe3LossProfileIndex }
::= { f3Pwe3LossProfileTable 1 }
F3Pwe3LossProfileEntry ::= SEQUENCE {
f3Pwe3LossProfileIndex Integer32,
f3Pwe3LossProfileLossStateEnterTime Unsigned32,
f3Pwe3LossProfileLossStateExitTime Unsigned32
}
f3Pwe3LossProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the PWE3 Loss Profile."
::= { f3Pwe3LossProfileEntry 1 }
f3Pwe3LossProfileLossStateEnterTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
holdoff time that will be applied prior to the SAToP
instance entering a Loss State."
::= { f3Pwe3LossProfileEntry 2 }
f3Pwe3LossProfileLossStateExitTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
holdon time that will be applied when the conditon causing
the loss state clears."
::= { f3Pwe3LossProfileEntry 3 }
--
--
-- PWE3 AIS Stabilization Profile
--
f3Pwe3AisStabilizationProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3AisStabilizationProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 AisStabilization
Profile entities."
::= { f3Pwe3ConfigObjects 5 }
f3Pwe3AisStabilizationProfileEntry OBJECT-TYPE
SYNTAX F3Pwe3AisStabilizationProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 AisStabilization Profile Entity. These profiles are used
by PWE3 SAToP entities."
INDEX { f3Pwe3AisStabilizationProfileIndex }
::= { f3Pwe3AisStabilizationProfileTable 1 }
F3Pwe3AisStabilizationProfileEntry ::= SEQUENCE {
f3Pwe3AisStabilizationProfileIndex Integer32,
f3Pwe3AisStabilizationProfileEnterTime Unsigned32,
f3Pwe3AisStabilizationProfileExitTime Unsigned32
}
f3Pwe3AisStabilizationProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the PWE3 AIS
Stabilization Profile."
::= { f3Pwe3AisStabilizationProfileEntry 1 }
f3Pwe3AisStabilizationProfileEnterTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
time (in hundreds of milliseconds) that will be applied on a
LOS event, before the SAToP instance transmits all 1s pattern
downstream (AIS).
Range 0 to 3 seconds in 100 millisecond increments."
::= { f3Pwe3AisStabilizationProfileEntry 2 }
f3Pwe3AisStabilizationProfileExitTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows SNMP management entities to specify the
holdon time that will be applied when leaving the AIS
Stabilization period.
Range 0 to 3 seconds in 100 milliseconds increments
(e.g. parameter range is 0 to 30)."
::= { f3Pwe3AisStabilizationProfileEntry 3 }
--
-- SAToP (Structure Agnostic TDM over Packet) Table
--
f3Pwe3SatopTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3SatopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 SAToP entities."
::= { f3Pwe3ConfigObjects 6 }
f3Pwe3SatopEntry OBJECT-TYPE
SYNTAX F3Pwe3SatopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 SAToP Entity."
INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex }
::= { f3Pwe3SatopTable 1 }
F3Pwe3SatopEntry ::= SEQUENCE {
-- index related/alias
f3Pwe3SatopIndex Integer32,
f3Pwe3SatopAlias DisplayString,
-- state management
f3Pwe3SatopAdminState AdminState,
f3Pwe3SatopOperationalState OperationalState,
f3Pwe3SatopSecondaryState SecondaryState,
-- Associated TDM entity
f3Pwe3SatopTDMEntity VariablePointer,
-- Discovery type
f3Pwe3SatopDiscoveryType PWE3SatopDiscoveryType,
-- SATOP header related
f3Pwe3SatopRemoteIpAddress IpAddress,
f3Pwe3SatopRemoteMacAddress MacAddress,
f3Pwe3SatopEncapsulationType PWE3SatopEncapsulationType,
f3Pwe3SatopRTPEnabled TruthValue,
f3Pwe3SatopRTPUpdateFrequency PWE3SatopRTPTSUpdateFreqType,
f3Pwe3SatopControlWordEnabled TruthValue,
f3Pwe3SatopJitterBufferSize Unsigned32,
f3Pwe3SatopPayloadSize Unsigned32,
f3Pwe3SatopVlanId VlanId,
f3Pwe3SatopVlanPriority VlanPriority,
f3Pwe3SatopRxMplsLabel1 MplsLabel,
f3Pwe3SatopRxMplsLabel2 MplsLabel,
f3Pwe3SatopTxMplsLabel1 MplsLabel,
f3Pwe3SatopTxMplsLabel2 MplsLabel,
-- associated profiles
f3Pwe3SatopAisStabilizationProfile VariablePointer,
f3Pwe3SatopResyncProfile VariablePointer,
f3Pwe3SatopLossProfile VariablePointer,
f3Pwe3SatopTransportMode PWE3SatopTransportMode,
-- creation/deletion
f3Pwe3SatopStorageType StorageType,
f3Pwe3SatopRowStatus RowStatus
}
f3Pwe3SatopIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the SAToP Entity."
::= { f3Pwe3SatopEntry 1 }
f3Pwe3SatopAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows SNMP management entities to provide an
alias to the PWE3 SAToP entity."
::= { f3Pwe3SatopEntry 2 }
f3Pwe3SatopAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Administrative State of the PWE3
SAToP entity."
::= { f3Pwe3SatopEntry 3 }
f3Pwe3SatopOperationalState OBJECT-TYPE
SYNTAX OperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Operational State of the PWE3
SAToP entity."
::= { f3Pwe3SatopEntry 4 }
f3Pwe3SatopSecondaryState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Secondary State of the PWE3
SAToP entity."
::= { f3Pwe3SatopEntry 5 }
f3Pwe3SatopTDMEntity OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the T1/E1 entity
associated with the SAToP. This is only used at
SATop creation time. Result of get operation on this object
will result with zeroDotZero since one Satop could have more
then one associated TDM entity. Subsequently, the associated
TDM entities are managed via f3Pwe3SatopTDMEntityTable.
"
::= { f3Pwe3SatopEntry 6 }
f3Pwe3SatopDiscoveryType OBJECT-TYPE
SYNTAX PWE3SatopDiscoveryType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows ability to statically/dynamically
determine the MAC address of the remote IP Address
associated with the SAToP. In the case of static discovery
type, f3Pwe3SatopRemoteMacAddress must be explicitly specified.
In the case of dynamic discovery, the system will use
ARP mechanism to obtain the remote Layer 2 MAC address."
::= { f3Pwe3SatopEntry 7 }
f3Pwe3SatopRemoteIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows ability to specify the remote IP
Address. This is used in the PWE payload."
::= { f3Pwe3SatopEntry 8 }
f3Pwe3SatopRemoteMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows ability to specify the remote Layer 2
MAC Address. This must be specified in case of
f3Pwe3SatopDiscoveryType as static. This is derived
dynamically (via ARP) if f3Pwe3SatopDiscoveryType is dynamic,
i.e. it does not have to be specified."
::= { f3Pwe3SatopEntry 9 }
f3Pwe3SatopEncapsulationType OBJECT-TYPE
SYNTAX PWE3SatopEncapsulationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows ability to specify the encapsulation
type of the SATop. It can be encapsulated with
VLAN and single MPLS label(vlan-one-mpls-label),
VLAN and two MPLS labels (vlan-two-mpls-label),
untagged and two MPLS labels (novlan-two-mpls-label)
."
::= { f3Pwe3SatopEntry 10 }
f3Pwe3SatopRTPEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables/disables RTP header for this SATop instance."
::= { f3Pwe3SatopEntry 11 }
f3Pwe3SatopRTPUpdateFrequency OBJECT-TYPE
SYNTAX PWE3SatopRTPTSUpdateFreqType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When f3Pwe3SatopRTPEnabled is true, this object allows
specification of the RTP clock update frequency."
::= { f3Pwe3SatopEntry 12 }
f3Pwe3SatopControlWordEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used for 3rd party interoperability, since
earlier versions of PWE do not support control-word."
::= { f3Pwe3SatopEntry 13 }
f3Pwe3SatopJitterBufferSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows definition of size of the jitter buffer
in microseconds for this SATop instance."
::= { f3Pwe3SatopEntry 14 }
f3Pwe3SatopPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the SATop payload size."
::= { f3Pwe3SatopEntry 15 }
f3Pwe3SatopVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the SATop VLAN Id.
Applicable for vlan based encapsulation types."
::= { f3Pwe3SatopEntry 16 }
f3Pwe3SatopVlanPriority OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the SATop VLAN Priority.
Applicable for vlan based encapsulation types."
::= { f3Pwe3SatopEntry 17 }
f3Pwe3SatopRxMplsLabel1 OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the expected
receive MPLS Label.
Applicable for single MPLS label encapsulation type."
::= { f3Pwe3SatopEntry 18 }
f3Pwe3SatopRxMplsLabel2 OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the expected
receive MPLS Label.
Applicable for dual MPLS label encapsulation types."
::= { f3Pwe3SatopEntry 19 }
f3Pwe3SatopTxMplsLabel1 OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the transmitted
MPLS Label, used for multiplexing.
Applicable for single MPLS label encapsulation type."
::= { f3Pwe3SatopEntry 20 }
f3Pwe3SatopTxMplsLabel2 OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the transmitted
MPLS Label, used for multiplexing.
Applicable for dual MPLS label encapsulation type."
::= { f3Pwe3SatopEntry 21 }
f3Pwe3SatopAisStabilizationProfile OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the AIS stabilization
Profile object. If no profile is associated, this value should be
0.0."
::= { f3Pwe3SatopEntry 22 }
f3Pwe3SatopResyncProfile OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Resync
Profile object. If no profile is associated, this value
should be 0.0."
::= { f3Pwe3SatopEntry 23 }
f3Pwe3SatopLossProfile OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Loss
Profile object. If no profile is associated, this value
should be 0.0."
::= { f3Pwe3SatopEntry 24 }
f3Pwe3SatopTransportMode OBJECT-TYPE
SYNTAX PWE3SatopTransportMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the SATop transport mode."
::= { f3Pwe3SatopEntry 25 }
f3Pwe3SatopStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3Pwe3SatopEntry 26 }
f3Pwe3SatopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3Pwe3SatopRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3Pwe3SatopRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3Pwe3SatopRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3Pwe3SatopEntry 27 }
--
-- PWE3 SATop TDM Entities Table
--
f3Pwe3SatopTDMEntitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3SatopTDMEntitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries corresponding to the PWE3 SATop TDM entities
."
::= { f3Pwe3ConfigObjects 7 }
f3Pwe3SatopTDMEntitiesEntry OBJECT-TYPE
SYNTAX F3Pwe3SatopTDMEntitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable to a particular
PWE3 SATop TDM entity."
INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopTDMEntityIndex}
::= { f3Pwe3SatopTDMEntitiesTable 1 }
F3Pwe3SatopTDMEntitiesEntry ::= SEQUENCE {
f3Pwe3SatopTDMEntityIndex Integer32,
f3Pwe3SatopTDMEntityObject VariablePointer,
f3Pwe3SatopTDMEntityStorageType StorageType,
f3Pwe3SatopTDMEntityRowStatus RowStatus
}
f3Pwe3SatopTDMEntityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index value associated with the PWE3 SATOP TDM Entity."
::= { f3Pwe3SatopTDMEntitiesEntry 1 }
f3Pwe3SatopTDMEntityObject OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object points to the PWE3 SATOP TDM Entity. This is
OID of the actual T1/E1 interface."
::= { f3Pwe3SatopTDMEntitiesEntry 2 }
f3Pwe3SatopTDMEntityStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { f3Pwe3SatopTDMEntitiesEntry 3 }
f3Pwe3SatopTDMEntityRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3Pwe3SatopTDMEntityRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3Pwe3SatopTDMEntityRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3Pwe3SatopTDMEntityRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { f3Pwe3SatopTDMEntitiesEntry 4 }
--
-- Performance Tables
--
-- PWE3 SATOP Stats (Current) Table
--
f3Pwe3SatopStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3SatopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PWE3 SATop Current data."
::= { f3Pwe3PerformanceObjects 1 }
f3Pwe3SatopStatsEntry OBJECT-TYPE
SYNTAX F3Pwe3SatopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3Pwe3SatopStatsTable."
INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopStatsIndex }
::= { f3Pwe3SatopStatsTable 1 }
F3Pwe3SatopStatsEntry ::= SEQUENCE {
f3Pwe3SatopStatsIndex Integer32,
f3Pwe3SatopStatsIntervalType CmPmIntervalType,
f3Pwe3SatopStatsValid TruthValue,
f3Pwe3SatopStatsAction CmPmBinAction,
f3Pwe3SatopStatsESs PerfCounter64,
f3Pwe3SatopStatsSESs PerfCounter64,
f3Pwe3SatopStatsEBs PerfCounter64,
f3Pwe3SatopStatsResyncs PerfCounter64,
f3Pwe3SatopStatsMaxJitter Unsigned32,
f3Pwe3SatopStatsFramesTx PerfCounter64,
f3Pwe3SatopStatsPayloadOctetsTx PerfCounter64,
f3Pwe3SatopStatsFramesRx PerfCounter64,
f3Pwe3SatopStatsPayloadOctetsRx PerfCounter64,
f3Pwe3SatopStatsOutOfSeqFramesRx PerfCounter64,
f3Pwe3SatopStatsLostFrames PerfCounter64,
f3Pwe3SatopStatsLostFramesStateTrans PerfCounter64,
f3Pwe3SatopStatsMalformedFramesRx PerfCounter64,
f3Pwe3SatopStatsJitterBufferLateFrames PerfCounter64
}
f3Pwe3SatopStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of the SATop current bin."
::= { f3Pwe3SatopStatsEntry 1 }
f3Pwe3SatopStatsIntervalType OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of collection, i.e. whether it is
15 Min, 1 Day."
::= { f3Pwe3SatopStatsEntry 2 }
f3Pwe3SatopStatsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3Pwe3SatopStatsEntry 3 }
f3Pwe3SatopStatsAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3Pwe3SatopStatsEntry 4 }
f3Pwe3SatopStatsESs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number
of Errored Seconds encountered by the
SATop in the current bin."
::= { f3Pwe3SatopStatsEntry 5 }
f3Pwe3SatopStatsSESs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds encountered by the
SATop in the current bin."
::= { f3Pwe3SatopStatsEntry 6 }
f3Pwe3SatopStatsEBs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Blocsk encountered by the SATop
in the current bin."
::= { f3Pwe3SatopStatsEntry 7 }
f3Pwe3SatopStatsResyncs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Resync count events encountered by the
SATop in the current bin."
::= { f3Pwe3SatopStatsEntry 8 }
f3Pwe3SatopStatsMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum absolute jitter on SATop in the current bin."
::= { f3Pwe3SatopStatsEntry 9 }
f3Pwe3SatopStatsFramesTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Frames Transmitted in the current bin."
::= { f3Pwe3SatopStatsEntry 10 }
f3Pwe3SatopStatsPayloadOctetsTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Payload Octets Transmitted in the current bin."
::= { f3Pwe3SatopStatsEntry 11 }
f3Pwe3SatopStatsFramesRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Frames Received in the current bin."
::= { f3Pwe3SatopStatsEntry 12 }
f3Pwe3SatopStatsPayloadOctetsRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Payload Octets Received in the current bin."
::= { f3Pwe3SatopStatsEntry 13 }
f3Pwe3SatopStatsOutOfSeqFramesRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Out of Sequence Frames Received in the current bin."
::= { f3Pwe3SatopStatsEntry 14 }
f3Pwe3SatopStatsLostFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Lost Frames detected in the current bin."
::= { f3Pwe3SatopStatsEntry 15 }
f3Pwe3SatopStatsLostFramesStateTrans OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transitions to
Lost Frame State detected in the current bin."
::= { f3Pwe3SatopStatsEntry 16 }
f3Pwe3SatopStatsMalformedFramesRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Malformed Frames received in the current bin."
::= { f3Pwe3SatopStatsEntry 17 }
f3Pwe3SatopStatsJitterBufferLateFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Jitter Buffer Late Frames in the current bin."
::= { f3Pwe3SatopStatsEntry 18 }
--
-- PWE3 SATOP History Table
--
f3Pwe3SatopHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3SatopHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PWE3 SATop History data."
::= { f3Pwe3PerformanceObjects 2 }
f3Pwe3SatopHistoryEntry OBJECT-TYPE
SYNTAX F3Pwe3SatopHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3Pwe3SatopHistoryTable."
INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopStatsIndex,
f3Pwe3SatopHistoryIndex }
::= { f3Pwe3SatopHistoryTable 1 }
F3Pwe3SatopHistoryEntry ::= SEQUENCE {
f3Pwe3SatopHistoryIndex Integer32,
f3Pwe3SatopHistoryTime DateAndTime,
f3Pwe3SatopHistoryValid TruthValue,
f3Pwe3SatopHistoryAction CmPmBinAction,
f3Pwe3SatopHistoryESs PerfCounter64,
f3Pwe3SatopHistorySESs PerfCounter64,
f3Pwe3SatopHistoryEBs PerfCounter64,
f3Pwe3SatopHistoryResyncs PerfCounter64,
f3Pwe3SatopHistoryMaxJitter Unsigned32,
f3Pwe3SatopHistoryFramesTx PerfCounter64,
f3Pwe3SatopHistoryPayloadOctetsTx PerfCounter64,
f3Pwe3SatopHistoryFramesRx PerfCounter64,
f3Pwe3SatopHistoryPayloadOctetsRx PerfCounter64,
f3Pwe3SatopHistoryOutOfSeqFramesRx PerfCounter64,
f3Pwe3SatopHistoryLostFrames PerfCounter64,
f3Pwe3SatopHistoryLostFramesStateTrans PerfCounter64,
f3Pwe3SatopHistoryMalformedFramesRx PerfCounter64,
f3Pwe3SatopHistoryJitterBufferLateFrames PerfCounter64
}
f3Pwe3SatopHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of the SATop current bin."
::= { f3Pwe3SatopHistoryEntry 1 }
f3Pwe3SatopHistoryTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time of history bin creation."
::= { f3Pwe3SatopHistoryEntry 2 }
f3Pwe3SatopHistoryValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the bin."
::= { f3Pwe3SatopHistoryEntry 3 }
f3Pwe3SatopHistoryAction OBJECT-TYPE
SYNTAX CmPmBinAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the Manager to clear the bin."
::= { f3Pwe3SatopHistoryEntry 4 }
f3Pwe3SatopHistoryESs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number
of Errored Seconds encountered by the
SATop in the current bin."
::= { f3Pwe3SatopHistoryEntry 5 }
f3Pwe3SatopHistorySESs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds encountered by the
SATop in the current bin."
::= { f3Pwe3SatopHistoryEntry 6 }
f3Pwe3SatopHistoryEBs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Blocsk encountered by the SATop
in the current bin."
::= { f3Pwe3SatopHistoryEntry 7 }
f3Pwe3SatopHistoryResyncs OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Resync count events encountered by the
SATop in the current bin."
::= { f3Pwe3SatopHistoryEntry 8 }
f3Pwe3SatopHistoryMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum absolute jitter on SATop in the current bin."
::= { f3Pwe3SatopHistoryEntry 9 }
f3Pwe3SatopHistoryFramesTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Frames Transmitted in the current bin."
::= { f3Pwe3SatopHistoryEntry 10 }
f3Pwe3SatopHistoryPayloadOctetsTx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Payload Octets Transmitted in the current bin."
::= { f3Pwe3SatopHistoryEntry 11 }
f3Pwe3SatopHistoryFramesRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Frames Received in the current bin."
::= { f3Pwe3SatopHistoryEntry 12 }
f3Pwe3SatopHistoryPayloadOctetsRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Payload Octets Received in the current bin."
::= { f3Pwe3SatopHistoryEntry 13 }
f3Pwe3SatopHistoryOutOfSeqFramesRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Out of Sequence Frames Received in the current bin."
::= { f3Pwe3SatopHistoryEntry 14 }
f3Pwe3SatopHistoryLostFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Lost Frames detected in the current bin."
::= { f3Pwe3SatopHistoryEntry 15 }
f3Pwe3SatopHistoryLostFramesStateTrans OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of transitions to
Lost Frame State detected in the current bin."
::= { f3Pwe3SatopHistoryEntry 16 }
f3Pwe3SatopHistoryMalformedFramesRx OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Malformed Frames received in the current bin."
::= { f3Pwe3SatopHistoryEntry 17 }
f3Pwe3SatopHistoryJitterBufferLateFrames OBJECT-TYPE
SYNTAX PerfCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Jitter Buffer Overruns in the current bin."
::= { f3Pwe3SatopHistoryEntry 18 }
--
-- PWE3 SATop Threshold Table
--
f3Pwe3SatopThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F3Pwe3SatopThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries that allow manageability of SATop
Thresholds."
::= { f3Pwe3PerformanceObjects 3 }
f3Pwe3SatopThresholdEntry OBJECT-TYPE
SYNTAX F3Pwe3SatopThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the f3Pwe3SatopThresholdTable."
INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopStatsIndex,
f3Pwe3SatopThresholdIndex }
::= { f3Pwe3SatopThresholdTable 1 }
F3Pwe3SatopThresholdEntry ::= SEQUENCE {
f3Pwe3SatopThresholdIndex Integer32,
f3Pwe3SatopThresholdInterval CmPmIntervalType,
f3Pwe3SatopThresholdVariable VariablePointer,
f3Pwe3SatopThresholdValueLo Unsigned32,
f3Pwe3SatopThresholdValueHi Unsigned32,
f3Pwe3SatopThresholdMonValue Counter64
}
f3Pwe3SatopThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
f3Pwe3SatopThresholdTable."
::= { f3Pwe3SatopThresholdEntry 1 }
f3Pwe3SatopThresholdInterval OBJECT-TYPE
SYNTAX CmPmIntervalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval over which monitored value is
sampled and compared with the specified threshold."
::= { f3Pwe3SatopThresholdEntry 2 }
f3Pwe3SatopThresholdVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled."
::= { f3Pwe3SatopThresholdEntry 3 }
f3Pwe3SatopThresholdValueLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lower 32 bits of the threshold value."
::= { f3Pwe3SatopThresholdEntry 4 }
f3Pwe3SatopThresholdValueHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Higher 32 bits of the threshold value."
::= { f3Pwe3SatopThresholdEntry 5 }
f3Pwe3SatopThresholdMonValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Monitored value corresponding to f3Pwe3SatopThresholdVariable."
::= { f3Pwe3SatopThresholdEntry 6 }
---
---Notifications
---
f3Pwe3SatopThresholdCrossingAlert NOTIFICATION-TYPE
OBJECTS {
f3Pwe3SatopThresholdIndex,
f3Pwe3SatopThresholdInterval,
f3Pwe3SatopThresholdVariable,
f3Pwe3SatopThresholdValueLo,
f3Pwe3SatopThresholdValueHi,
f3Pwe3SatopThresholdMonValue
}
STATUS current
DESCRIPTION
"This trap is sent each time a threshold on a PM condition
on an PWE3 SATop is crossed."
::= { f3Pwe3PerformanceNotifications 1 }
--
-- CONFORMANCE
--
f3Pwe3Compliances OBJECT IDENTIFIER ::= {f3Pwe3Conformance 1}
f3Pwe3Groups OBJECT IDENTIFIER ::= {f3Pwe3Conformance 2}
f3Pwe3Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the F3 PWE3
group."
MODULE -- this module
MANDATORY-GROUPS {
f3Pwe3ObjectGroup, f3Pwe3PerfObjectGroup, f3Pwe3PerfNotifGroup
}
::= { f3Pwe3Compliances 1 }
f3Pwe3ObjectGroup OBJECT-GROUP
OBJECTS {
f3Pwe3IdlePatternProfileIndex, f3Pwe3IdlePatternProfileByte,
f3Pwe3ResyncProfileIndex, f3Pwe3ResyncProfileIncreaseFactor,
f3Pwe3ResyncProfileDecreaseFactor, f3Pwe3ResyncProfileResyncThreshold,
f3Pwe3LoopbackProfileIndex, f3Pwe3LoopbackProfileLength,
f3Pwe3LoopbackProfilePattern, f3Pwe3LoopbackProfileRepeatTime,
f3Pwe3LoopbackProfileClearLength, f3Pwe3LoopbackProfileClearPattern,
f3Pwe3LossProfileIndex, f3Pwe3LossProfileLossStateEnterTime,
f3Pwe3LossProfileLossStateExitTime,
f3Pwe3AisStabilizationProfileIndex,
f3Pwe3AisStabilizationProfileEnterTime,
f3Pwe3AisStabilizationProfileExitTime,
f3Pwe3SatopIndex, f3Pwe3SatopAlias,
f3Pwe3SatopAdminState, f3Pwe3SatopOperationalState,
f3Pwe3SatopSecondaryState, f3Pwe3SatopTDMEntity,
f3Pwe3SatopDiscoveryType, f3Pwe3SatopRemoteIpAddress,
f3Pwe3SatopRemoteMacAddress, f3Pwe3SatopEncapsulationType,
f3Pwe3SatopRTPEnabled, f3Pwe3SatopRTPUpdateFrequency,
f3Pwe3SatopControlWordEnabled, f3Pwe3SatopJitterBufferSize,
f3Pwe3SatopPayloadSize, f3Pwe3SatopVlanId, f3Pwe3SatopVlanPriority,
f3Pwe3SatopRxMplsLabel1, f3Pwe3SatopRxMplsLabel2,
f3Pwe3SatopTxMplsLabel1, f3Pwe3SatopTxMplsLabel2,
f3Pwe3SatopAisStabilizationProfile, f3Pwe3SatopResyncProfile,
f3Pwe3SatopLossProfile, f3Pwe3SatopTransportMode,
f3Pwe3SatopStorageType, f3Pwe3SatopRowStatus,
f3Pwe3SatopTDMEntityIndex, f3Pwe3SatopTDMEntityObject,
f3Pwe3SatopTDMEntityStorageType, f3Pwe3SatopTDMEntityRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the F3 PWE3 Configuration data."
::= { f3Pwe3Groups 1 }
f3Pwe3PerfObjectGroup OBJECT-GROUP
OBJECTS {
f3Pwe3SatopStatsIndex, f3Pwe3SatopStatsIntervalType,
f3Pwe3SatopStatsValid, f3Pwe3SatopStatsAction,
f3Pwe3SatopStatsESs, f3Pwe3SatopStatsSESs,
f3Pwe3SatopStatsEBs,
f3Pwe3SatopStatsResyncs, f3Pwe3SatopStatsMaxJitter,
f3Pwe3SatopStatsFramesTx, f3Pwe3SatopStatsPayloadOctetsTx,
f3Pwe3SatopStatsFramesRx, f3Pwe3SatopStatsPayloadOctetsRx,
f3Pwe3SatopStatsOutOfSeqFramesRx, f3Pwe3SatopStatsLostFrames,
f3Pwe3SatopStatsLostFramesStateTrans,
f3Pwe3SatopStatsMalformedFramesRx,
f3Pwe3SatopStatsJitterBufferLateFrames,
f3Pwe3SatopHistoryIndex, f3Pwe3SatopHistoryTime,
f3Pwe3SatopHistoryValid, f3Pwe3SatopHistoryAction,
f3Pwe3SatopHistoryESs, f3Pwe3SatopHistorySESs,
f3Pwe3SatopHistoryEBs,
f3Pwe3SatopHistoryResyncs, f3Pwe3SatopHistoryMaxJitter,
f3Pwe3SatopHistoryFramesTx, f3Pwe3SatopHistoryPayloadOctetsTx,
f3Pwe3SatopHistoryFramesRx, f3Pwe3SatopHistoryPayloadOctetsRx,
f3Pwe3SatopHistoryOutOfSeqFramesRx, f3Pwe3SatopHistoryLostFrames,
f3Pwe3SatopHistoryLostFramesStateTrans,
f3Pwe3SatopHistoryMalformedFramesRx,
f3Pwe3SatopHistoryJitterBufferLateFrames,
f3Pwe3SatopThresholdIndex, f3Pwe3SatopThresholdInterval,
f3Pwe3SatopThresholdVariable, f3Pwe3SatopThresholdValueLo,
f3Pwe3SatopThresholdValueHi, f3Pwe3SatopThresholdMonValue
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the F3 PWE3 Performance data."
::= { f3Pwe3Groups 2 }
f3Pwe3PerfNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
f3Pwe3SatopThresholdCrossingAlert
}
STATUS current
DESCRIPTION
"A collection of notifications related to F3 PWE3 Threshold Crossing
Alerts."
::= { f3Pwe3Groups 3 }
END