mibs/MIBS/allied/AT-ENVMON-MIB

627 lines
21 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- AT-ENVMON.MIB, Allied Telesis enterprise MIB: Environment Monitoring
--
-- Copied from ATR-ENVMON.MIB of pre 2.9.1 release
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
--
-- ============================================================================
AT-ENVMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
enterprises
FROM SNMPv2-SMI
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
DisplayStringUnsized
FROM AT-SMI-MIB
sysinfo
FROM AT-SYSINFO-MIB
;
envMon MODULE-IDENTITY
LAST-UPDATED "200603070000Z"
ORGANIZATION "Allied Telesis, Inc"
CONTACT-INFO
"http://www.alliedtelesis.com"
DESCRIPTION
"The AT Environment Monitoring MIB for managing and
reporting data relating to voltage rails, fan speeds,
temperature sensors and power supply units."
REVISION "200603070000Z"
DESCRIPTION
"Initial Revision"
::= { sysinfo 10 }
-- Textual Conventions
EnvMonPsbSensorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the type of a Power Supply Bay Device sensor."
SYNTAX INTEGER {
psbSensorTypeInvalid (0),
fanSpeedDiscrete (1),
temperatureDiscrete (2),
voltageDiscrete (3) }
-- This section of the MIB contains new generic environment monitoring
-- data. It relates to temperature, fanspeed, voltage and power supply
-- bay device monitors.
-- ---------------------------------------------------------- --
-- The Environment Monitoring Fan Table
-- ---------------------------------------------------------- --
envMonFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF EnvMonFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fans installed in the device that have their
fan speeds monitored by environment monitoring hardware."
::= { envMon 1 }
envMonFanEntry OBJECT-TYPE
SYNTAX EnvMonFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description, current speed, lower threshold speed and
current status of a fan."
INDEX { envMonFanBoardIndex, envMonFanIndex }
::= { envMonFanTable 1 }
EnvMonFanEntry ::=
SEQUENCE {
envMonFanBoardIndex
Unsigned32,
envMonFanIndex
Unsigned32,
envMonFanDescription
DisplayStringUnsized,
envMonFanCurrentSpeed
Unsigned32,
envMonFanLowerThreshold
Unsigned32,
envMonFanAlarm
TruthValue
}
envMonFanBoardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board hosting this fan in the board table."
::= { envMonFanEntry 1 }
envMonFanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numeric identifier of this fan within the context of its host board."
::= { envMonFanEntry 2 }
envMonFanDescription OBJECT-TYPE
SYNTAX DisplayStringUnsized (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text description of this fan."
::= { envMonFanEntry 3 }
envMonFanCurrentSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current speed of this fan in revolutions per
minute."
::= { envMonFanEntry 4 }
envMonFanLowerThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum acceptable speed of the fan (in revolutions
per minute)."
::= { envMonFanEntry 5 }
envMonFanAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this fan is currently in an
alarm condition. A value of TRUE indicates that its
current speed is too low, FALSE indicates that the
current speed is acceptable."
::= { envMonFanEntry 6 }
-- ---------------------------------------------------------- --
-- The Environment Monitoring Voltage Table
-- ---------------------------------------------------------- --
envMonVoltageTable OBJECT-TYPE
SYNTAX SEQUENCE OF EnvMonVoltageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of voltage rails in the device that are
monitored by environment monitoring hardware."
::= { envMon 2 }
envMonVoltageEntry OBJECT-TYPE
SYNTAX EnvMonVoltageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description, current value, upper & lower threshold
settings and current status of a voltage rail."
INDEX { envMonVoltageBoardIndex, envMonVoltageIndex }
::= { envMonVoltageTable 1 }
EnvMonVoltageEntry ::=
SEQUENCE {
envMonVoltageBoardIndex
Unsigned32,
envMonVoltageIndex
Unsigned32,
envMonVoltageDescription
DisplayStringUnsized,
envMonVoltageCurrent
INTEGER,
envMonVoltageUpperThreshold
INTEGER,
envMonVoltageLowerThreshold
INTEGER,
envMonVoltageAlarm
TruthValue
}
envMonVoltageBoardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board hosting this voltage sensor in the board table."
::= { envMonVoltageEntry 1 }
envMonVoltageIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numeric identifier of this voltage rail within the context of its host board."
::= { envMonVoltageEntry 2 }
envMonVoltageDescription OBJECT-TYPE
SYNTAX DisplayStringUnsized (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text description of this voltage rail."
::= { envMonVoltageEntry 3 }
envMonVoltageCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current reading of this voltage rail in millivolts."
::= { envMonVoltageEntry 4 }
envMonVoltageUpperThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum acceptable reading of this voltage rail in millivolts."
::= { envMonVoltageEntry 5 }
envMonVoltageLowerThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum acceptable reading of this voltage rail in millivolts."
::= { envMonVoltageEntry 6 }
envMonVoltageAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this voltage rail is currently
in an alarm condition. A value of TRUE indicates that
its current reading is outside its threshold range,
FALSE indicates that the current reading is acceptable."
::= { envMonVoltageEntry 7 }
-- ---------------------------------------------------------- --
-- The Environment Monitoring Temperature Table
-- ---------------------------------------------------------- --
envMonTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF EnvMonTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of temperature sensors in the device that are
monitored by environment monitoring hardware."
::= { envMon 3 }
envMonTemperatureEntry OBJECT-TYPE
SYNTAX EnvMonTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description, current value, upper threshold setting
and current status of a temperature sensor."
INDEX { envMonTemperatureBoardIndex, envMonTemperatureIndex }
::= { envMonTemperatureTable 1 }
EnvMonTemperatureEntry ::=
SEQUENCE {
envMonTemperatureBoardIndex
Unsigned32,
envMonTemperatureIndex
Unsigned32,
envMonTemperatureDescription
DisplayStringUnsized,
envMonTemperatureCurrent
INTEGER,
envMonTemperatureUpperThreshold
INTEGER,
envMonTemperatureAlarm
TruthValue
}
envMonTemperatureBoardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board hosting this temperature sensor in the board table."
::= { envMonTemperatureEntry 1 }
envMonTemperatureIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numeric identifier of this temperature sensor within the context of its host board."
::= { envMonTemperatureEntry 2 }
envMonTemperatureDescription OBJECT-TYPE
SYNTAX DisplayStringUnsized (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text description of this temperature sensor."
::= { envMonTemperatureEntry 3 }
envMonTemperatureCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current reading of this temperature sensor in tenths of a degree Celcius."
::= { envMonTemperatureEntry 4 }
envMonTemperatureUpperThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum acceptable reading of this temperature
sensor in tenths of a degree Celcius."
::= { envMonTemperatureEntry 5 }
envMonTemperatureAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this temperature sensor is
currently in an alarm condition. A value of TRUE indicates
that its current reading is outside its threshold range,
FALSE indicates that the current reading is acceptable."
::= { envMonTemperatureEntry 6 }
-- ---------------------------------------------------------- --
-- The Environment Monitoring Power Supply Bay Device Table
-- ---------------------------------------------------------- --
envMonPsbObjects OBJECT IDENTIFIER ::= { envMon 4 }
envMonPsbTable OBJECT-TYPE
SYNTAX SEQUENCE OF EnvMonPsbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing power supply bays in the system and info
on any devices that are present."
::= { envMonPsbObjects 1 }
envMonPsbEntry OBJECT-TYPE
SYNTAX EnvMonPsbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description and current status of a power supply
bay device."
INDEX { envMonPsbHostBoardIndex, envMonPsbHostSlotIndex }
::= { envMonPsbTable 1 }
EnvMonPsbEntry ::=
SEQUENCE {
envMonPsbHostBoardIndex
Unsigned32,
envMonPsbHostSlotIndex
Unsigned32,
envMonPsbHeldBoardIndex
Unsigned32,
envMonPsbHeldBoardId
OBJECT IDENTIFIER,
envMonPsbDescription
DisplayStringUnsized
}
envMonPsbHostBoardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board hosting this PSB in the board table."
::= { envMonPsbEntry 1 }
envMonPsbHostSlotIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this PSB slot within the context of its host board.
This index is fixed for each slot, on each type of board."
::= { envMonPsbEntry 2 }
envMonPsbHeldBoardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of a board installed in this power supply bay.
This value corresponds to envMonPsbSensorBoardIndex for
each sensor on this board. A value of 0 indicates that a
board is is either not present or not supported."
::= { envMonPsbEntry 3 }
envMonPsbHeldBoardId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of board installed in this power supply bay. The
values of this object are taken from the pprXxx object IDs
under the boards sub-tree in the parent MIB. A value of 0
indicates that a board is is either not present or not
supported."
::= { envMonPsbEntry 4 }
envMonPsbDescription OBJECT-TYPE
SYNTAX DisplayStringUnsized (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text description of this power supply bay."
::= { envMonPsbEntry 5 }
envMonPsbSensorTable OBJECT-TYPE
SYNTAX SEQUENCE OF EnvMonPsbSensorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of environment monitoring sensors on installed
power supply bay devices."
::= { envMonPsbObjects 2 }
envMonPsbSensorEntry OBJECT-TYPE
SYNTAX EnvMonPsbSensorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description and current status of a power supply
bay device."
INDEX { envMonPsbSensorBoardIndex, envMonPsbSensorIndex }
::= { envMonPsbSensorTable 1 }
EnvMonPsbSensorEntry ::=
SEQUENCE {
envMonPsbSensorBoardIndex
Unsigned32,
envMonPsbSensorIndex
Unsigned32,
envMonPsbSensorType
EnvMonPsbSensorType,
envMonPsbSensorDescription
DisplayStringUnsized,
envMonPsbSensorAlarm
TruthValue
}
envMonPsbSensorBoardIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board hosting this sensor in the board table."
::= { envMonPsbSensorEntry 1 }
envMonPsbSensorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this power supply bay environmental sensor, within the
context of its host board."
::= { envMonPsbSensorEntry 2 }
envMonPsbSensorType OBJECT-TYPE
SYNTAX EnvMonPsbSensorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of environmental variable this sensor detects."
::= { envMonPsbSensorEntry 3 }
envMonPsbSensorDescription OBJECT-TYPE
SYNTAX DisplayStringUnsized (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text description of this power supply bay environmental sensor."
::= { envMonPsbSensorEntry 4 }
envMonPsbSensorAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this environmental sensor is currently
in an alarm condition. A value of TRUE indicates that
the device is in a failure condition, FALSE indicates
that the device is functioning normally."
::= { envMonPsbSensorEntry 5 }
-- ---------------------------------------------------------- --
-- The Environment Monitoring SNMP Trap Objects
-- ---------------------------------------------------------- --
envMonTraps OBJECT IDENTIFIER ::= { envMon 5 }
envMonFanAlarmSetEvent NOTIFICATION-TYPE
OBJECTS { envMonFanBoardIndex,
envMonFanIndex,
envMonFanDescription,
envMonFanLowerThreshold,
envMonFanCurrentSpeed }
STATUS current
DESCRIPTION
"Triggered when the monitored speed of a fan
drops below its lower threshold."
::= { envMonTraps 1 }
envMonFanAlarmClearedEvent NOTIFICATION-TYPE
OBJECTS { envMonFanBoardIndex,
envMonFanIndex,
envMonFanDescription,
envMonFanLowerThreshold,
envMonFanCurrentSpeed }
STATUS current
DESCRIPTION
"Triggered when the monitored speed of a fan
returns to an acceptable value, the fan
having previously been in an alarm condition."
::= { envMonTraps 2 }
envMonVoltAlarmSetEvent NOTIFICATION-TYPE
OBJECTS { envMonVoltageBoardIndex,
envMonVoltageIndex,
envMonVoltageDescription,
envMonVoltageUpperThreshold,
envMonVoltageLowerThreshold,
envMonVoltageCurrent }
STATUS current
DESCRIPTION
"Triggered when the voltage of a monitored
voltage rail, goes out of tolerance by
either dropping below its lower threshold,
or exceeding its upper threshold."
::= { envMonTraps 3 }
envMonVoltAlarmClearedEvent NOTIFICATION-TYPE
OBJECTS { envMonVoltageBoardIndex,
envMonVoltageIndex,
envMonVoltageDescription,
envMonVoltageUpperThreshold,
envMonVoltageLowerThreshold,
envMonVoltageCurrent }
STATUS current
DESCRIPTION
"Triggered when the voltage of a monitored
voltage rail returns to an acceptable value,
having previously been in an alarm condition."
::= { envMonTraps 4 }
envMonTempAlarmSetEvent NOTIFICATION-TYPE
OBJECTS { envMonTemperatureBoardIndex,
envMonTemperatureIndex,
envMonTemperatureDescription,
envMonTemperatureUpperThreshold,
envMonTemperatureCurrent }
STATUS current
DESCRIPTION
"Triggered when a monitored temperature
exceeds its upper threshold."
::= { envMonTraps 5 }
envMonTempAlarmClearedEvent NOTIFICATION-TYPE
OBJECTS { envMonTemperatureBoardIndex,
envMonTemperatureIndex,
envMonTemperatureDescription,
envMonTemperatureUpperThreshold,
envMonTemperatureCurrent }
STATUS current
DESCRIPTION
"Triggered when a monitored temperature
returns to an acceptable value, having
previously been in an alarm condition."
::= { envMonTraps 6 }
envMonPsbAlarmSetEvent NOTIFICATION-TYPE
OBJECTS { envMonPsbSensorBoardIndex,
envMonPsbSensorIndex,
envMonPsbSensorType,
envMonPsbSensorDescription }
STATUS current
DESCRIPTION
"Triggered when a monitored parameter of
a power supply bay device goes out of
tolerance."
::= { envMonTraps 7 }
envMonPsbAlarmClearedEvent NOTIFICATION-TYPE
OBJECTS { envMonPsbSensorBoardIndex,
envMonPsbSensorIndex,
envMonPsbSensorType,
envMonPsbSensorDescription }
STATUS current
DESCRIPTION
"Triggered when a monitored parameter of
a power supply bay device returns to an
acceptable value, having previously been
in an alarm condition."
::= { envMonTraps 8 }
END