1114 lines
43 KiB
Plaintext
1114 lines
43 KiB
Plaintext
|
ARRIS-C3-MAC-MIB DEFINITIONS ::= BEGIN
|
||
|
|
||
|
IMPORTS
|
||
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
|
||
|
FROM SNMPv2-SMI
|
||
|
TEXTUAL-CONVENTION, TimeInterval, RowStatus, TruthValue, DisplayString
|
||
|
FROM SNMPv2-TC
|
||
|
ifIndex
|
||
|
FROM IF-MIB -- RFC2233
|
||
|
TenthdBmV
|
||
|
FROM DOCS-IF-MIB -- RFC2670
|
||
|
TenthdB
|
||
|
FROM DOCS-IF-MIB -- RFC2670
|
||
|
cmtsC3
|
||
|
FROM ARRIS-MIB;
|
||
|
|
||
|
cmtsC3MACMIB MODULE-IDENTITY
|
||
|
LAST-UPDATED "200412030000Z" -- 3nd Dec 2004
|
||
|
ORGANIZATION "Arris International"
|
||
|
CONTACT-INFO
|
||
|
" Network Management
|
||
|
Postal: Arris International.
|
||
|
4400 Cork Airport Business Park
|
||
|
Cork Airport, Kinsale Road
|
||
|
Cork, Ireland.
|
||
|
Tel: +353 21 7305 800
|
||
|
Fax: +353 21 4321 972"
|
||
|
|
||
|
DESCRIPTION
|
||
|
"This MIB manages the MAC software on the Cadant C3 CMTS."
|
||
|
REVISION "200411210000Z"
|
||
|
DESCRIPTION
|
||
|
"Changes to support fully programmable IF frequency.
|
||
|
Added support for downstream wireless mode.
|
||
|
Updated some mib descriptions for clarity and typos.
|
||
|
Added mixed mode to DocsisMacType definition which defines a
|
||
|
docsis downstream and euro-docsis upstream configuration that is
|
||
|
used by some customers in lieu of annex C mode which the CMTS does
|
||
|
not support in hardware.
|
||
|
Added support for downstream wireless mode."
|
||
|
REVISION "200411260000Z"
|
||
|
DESCRIPTION
|
||
|
"Added dcxMACUpChannelinitialRangingDelay."
|
||
|
REVISION "200412030000Z"
|
||
|
DESCRIPTION
|
||
|
"Added dcxMACUccMaxFailedAttempts."
|
||
|
::= { cmtsC3 6 }
|
||
|
|
||
|
DocsisMacType ::= TEXTUAL-CONVENTION
|
||
|
STATUS current
|
||
|
DESCRIPTION "Indicates the DOCSIS Channel Type."
|
||
|
SYNTAX INTEGER {
|
||
|
docsis (1),
|
||
|
euroDocsis (2),
|
||
|
mixed (3),
|
||
|
custom(4)
|
||
|
}
|
||
|
|
||
|
dcxMACObjects OBJECT IDENTIFIER ::= { cmtsC3MACMIB 1 }
|
||
|
|
||
|
dcxMACCmtsMacTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACCmtsMacEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Additional columns for docsIfCmtsMacTable.
|
||
|
An entry in this table exists for each ifEntry with an
|
||
|
ifType of docsCableMaclayer(127)."
|
||
|
::= { dcxMACObjects 1 }
|
||
|
|
||
|
dcxMACCmtsMacEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACCmtsMacEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"dcxMACCmtsMacEntry"
|
||
|
INDEX {ifIndex}
|
||
|
::= { dcxMACCmtsMacTable 1 }
|
||
|
|
||
|
DcxMACCmtsMacEntry ::= SEQUENCE {
|
||
|
dcxMACCmtsMacMode DocsisMacType,
|
||
|
dcxMACCableAdvanceType INTEGER,
|
||
|
dcxMACPlantLength Unsigned32,
|
||
|
dcxMACFlapAgingTime Unsigned32,
|
||
|
dcxMACFlapInsertTime Unsigned32,
|
||
|
dcxMACFlapMissThresh Unsigned32,
|
||
|
dcxMACFlapListSize Unsigned32,
|
||
|
dcxMACCmOfflineAgingTime Unsigned32,
|
||
|
dcxMACUccMaxFailedAttempts Unsigned32
|
||
|
}
|
||
|
|
||
|
dcxMACCmtsMacMode OBJECT-TYPE
|
||
|
SYNTAX DocsisMacType
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Indicates the mode in which the MAC is operating. A read to this
|
||
|
value may return any of the modes defined by DocsisMacType. Only
|
||
|
the modes docsis, euroDocsis and mixed may be written.
|
||
|
When set to docsis or euroDocsis, all downstream and upstream
|
||
|
channels in this MAC domain will be configured in DOCSIS or
|
||
|
EuroDOCSIS mode respectively. When set to mixed, the downstream
|
||
|
channels will be configured in DOCSIS and the upstream channels
|
||
|
will be running in EuroDOCSIS mode.
|
||
|
The value custom will be returned in a read operation if any of
|
||
|
the underlying channels has been reconfigured in such a way that
|
||
|
the MAC can not be described a docsis, euroDocsis or mixed."
|
||
|
::= { dcxMACCmtsMacEntry 1 }
|
||
|
|
||
|
|
||
|
dcxMACCableAdvanceType OBJECT-TYPE
|
||
|
SYNTAX INTEGER { static(0), dynamic(1) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable Map Advance Type - 0 for Static, 1 for Dynamic."
|
||
|
::= { dcxMACCmtsMacEntry 2 }
|
||
|
|
||
|
|
||
|
dcxMACPlantLength OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..161)
|
||
|
UNITS "kilometers"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable Plant Length (1-way) in kilometers."
|
||
|
::= { dcxMACCmtsMacEntry 3 }
|
||
|
|
||
|
|
||
|
dcxMACFlapAgingTime OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..864000)
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable Flap List Aging Time in seconds."
|
||
|
::= { dcxMACCmtsMacEntry 4 }
|
||
|
|
||
|
|
||
|
dcxMACFlapInsertTime OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 ( 0..86400 )
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable Flap List Insertion Time threshold in seconds."
|
||
|
::= { dcxMACCmtsMacEntry 5 }
|
||
|
|
||
|
|
||
|
dcxMACFlapMissThresh OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..12)
|
||
|
UNITS "misses"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable Flap List Miss Threshold in misses."
|
||
|
::= { dcxMACCmtsMacEntry 6 }
|
||
|
|
||
|
|
||
|
dcxMACFlapListSize OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..6000)
|
||
|
UNITS "entries"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable Flap List Maximum Number of Entries."
|
||
|
::= { dcxMACCmtsMacEntry 8 }
|
||
|
|
||
|
|
||
|
dcxMACCmOfflineAgingTime OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (3600..864000)
|
||
|
UNITS "seconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Cable modem offline aging time in seconds. Minimum value
|
||
|
is 1 hour. Maximum time before aging a modem is 10 days.
|
||
|
Default value is 24 hours."
|
||
|
DEFVAL { 86400 }
|
||
|
::= { dcxMACCmtsMacEntry 9 }
|
||
|
|
||
|
|
||
|
dcxMACUccMaxFailedAttempts OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Maximum number of consecutive failed channel change attempts that
|
||
|
a modem is allowed before the CMTS decides to no longer use the
|
||
|
modem for load balancing purposes.
|
||
|
If a modem successfully completes a channel change before the
|
||
|
maximum number of attempts is reached, the number of consecutive
|
||
|
failed attempts for the modem is reset.
|
||
|
A value of 0 indicates no limit."
|
||
|
DEFVAL { 2 }
|
||
|
::= { dcxMACCmtsMacEntry 10 }
|
||
|
|
||
|
|
||
|
dcxMACDownstreamChannelTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACDownstreamChannelEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Additional columns for docsIfDownstreamChannelTable.
|
||
|
An entry in this table exists for each ifEntry with an
|
||
|
ifType of docsCableDownstream(128)."
|
||
|
::= { dcxMACObjects 2 }
|
||
|
|
||
|
dcxMACDownstreamChannelEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACDownstreamChannelEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"dcxMACDownstreamChannelEntry"
|
||
|
INDEX {ifIndex}
|
||
|
::= { dcxMACDownstreamChannelTable 1 }
|
||
|
|
||
|
DcxMACDownstreamChannelEntry ::= SEQUENCE {
|
||
|
dcxMACDownChannelMacMode DocsisMacType,
|
||
|
dcxMACDownChannelUpconverter INTEGER,
|
||
|
dcxMACDownChannelIfFrequency Integer32,
|
||
|
dcxMACDownChannelWirelessMode INTEGER,
|
||
|
dcxMACDownChannelSymbolRate Integer32,
|
||
|
dcxMACDownChannelAlpha Integer32
|
||
|
}
|
||
|
|
||
|
dcxMACDownChannelMacMode OBJECT-TYPE
|
||
|
SYNTAX DocsisMacType
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Configures the downstream to DOCSIS or EuroDOCSIS.
|
||
|
When dcxMACDownChannelWirelessMode is disabled, changes to this
|
||
|
will impact the downstream annex type, modulation, symbol rate
|
||
|
and interleaver. When wireless mode is enabled, only the annex
|
||
|
type and interleaver will be changed."
|
||
|
::= { dcxMACDownstreamChannelEntry 1 }
|
||
|
|
||
|
dcxMACDownChannelUpconverter OBJECT-TYPE
|
||
|
SYNTAX INTEGER { internal(1), external(2) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Controls whether or not the internal upconverter is used.
|
||
|
If set to internal, the downstream IF frequency will operate
|
||
|
in read-only mode and will be configured internally by the
|
||
|
CMTS based on the downstream channel configuration.
|
||
|
If set to external, the IF frequency may be programmed to set the
|
||
|
frequency supplied to an external upconverter via the IF output.
|
||
|
In this mode, the downstream RF frequency and power will both
|
||
|
return 0 when read."
|
||
|
::= { dcxMACDownstreamChannelEntry 2 }
|
||
|
|
||
|
dcxMACDownChannelIfFrequency OBJECT-TYPE
|
||
|
SYNTAX Integer32 (10000000..60000000)
|
||
|
UNITS "hertz"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The IF frequency output by the modulator for this channel."
|
||
|
::= { dcxMACDownstreamChannelEntry 3 }
|
||
|
|
||
|
dcxMACDownChannelWirelessMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER { active(1), inactive(2) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enabling this mode allows non-standard downstream modulations and
|
||
|
symbol rates to be configured which are suitable when using the
|
||
|
CMTS in a wireless application. Changes to dcxMACDownChannelMacMode
|
||
|
when wireless mode is active will only impact the downstream annex
|
||
|
type and interleaver settings. Modulation and symbol rates will
|
||
|
only be affected when wireless mode is disabled.
|
||
|
Disabling wireless mode will reset any non-standard modulation and
|
||
|
symbol rates settings in order to restore a standard DOCSIS or
|
||
|
EuroDOCSIS downstream.
|
||
|
If a set to active fails, a license may be required to activate the
|
||
|
feature."
|
||
|
::= { dcxMACDownstreamChannelEntry 4 }
|
||
|
|
||
|
dcxMACDownChannelSymbolRate OBJECT-TYPE
|
||
|
SYNTAX Integer32 (1250000..6952000)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Sets the downstream symbol rate."
|
||
|
::= { dcxMACDownstreamChannelEntry 5 }
|
||
|
|
||
|
dcxMACDownChannelAlpha OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
UNITS "percent"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The percentage of excess bandwidth for the channel."
|
||
|
::= { dcxMACDownstreamChannelEntry 6 }
|
||
|
|
||
|
dcxMACUpstreamChannelTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACUpstreamChannelEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Additional columns for docsIfUpstreamChannelTable.
|
||
|
An entry in this table exists for each ifEntry with an
|
||
|
ifType of docsCableUpstream(129)."
|
||
|
::= { dcxMACObjects 3 }
|
||
|
|
||
|
dcxMACUpstreamChannelEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACUpstreamChannelEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"dcxMACUpstreamChannelEntry"
|
||
|
INDEX {ifIndex}
|
||
|
::= { dcxMACUpstreamChannelTable 1 }
|
||
|
|
||
|
DcxMACUpstreamChannelEntry ::= SEQUENCE {
|
||
|
dcxMACUpChannelMacMode DocsisMacType,
|
||
|
dcxMACUpChannelAmpAttenuation TenthdBmV,
|
||
|
dcxMACUpChannelIngressCancellation INTEGER,
|
||
|
dcxMACUpChannelGroupId Unsigned32,
|
||
|
dcxMACUpChannelShortPollInterval TimeInterval,
|
||
|
dcxMACUpChannelPeriodicPollInterval TimeInterval,
|
||
|
dcxMACUpChannelInputPowerMode INTEGER,
|
||
|
dcxMACUpChannelPower TenthdBmV,
|
||
|
dcxMACUpChannelPlantLength Unsigned32,
|
||
|
dcxMACUpChannelMaxCmMapProcTime Unsigned32,
|
||
|
dcxMACUpChannelConcatenation TruthValue,
|
||
|
dcxMACUpChannelSpMgtTriggerIndex Unsigned32,
|
||
|
dcxMACUpChannelLowPowerOffset TenthdBmV,
|
||
|
dcxMACUpChannelHighPowerOffset TenthdBmV,
|
||
|
dcxMACUpChannelLogSnrAveTimeconstant Unsigned32,
|
||
|
dcxMACUpChannelImpulseMitigation INTEGER,
|
||
|
dcxMACUpChannelRngPreambleGuardSymbols Unsigned32,
|
||
|
dcxMACUpChannelNrngPreambleGuardSymbols Unsigned32,
|
||
|
dcxMACUpChannelExtendedFrequencyErrorDetect INTEGER,
|
||
|
dcxMACUpChannelLogC3SnrTimeconstant Unsigned32,
|
||
|
dcxMACUpChannelSignalNoise TenthdB,
|
||
|
dcxMACUpChannelSafeConfig TruthValue,
|
||
|
dcxMACUpChannelInitialRangingDelay Unsigned32
|
||
|
}
|
||
|
|
||
|
dcxMACUpChannelMacMode OBJECT-TYPE
|
||
|
SYNTAX DocsisMacType
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Indicates the mode in which this upstream is operating. A read or
|
||
|
write to this may consist only of the values docsis or euroDocsis."
|
||
|
::= { dcxMACUpstreamChannelEntry 1 }
|
||
|
|
||
|
dcxMACUpChannelAmpAttenuation OBJECT-TYPE
|
||
|
SYNTAX TenthdBmV
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The amplifier attenuation level for this logical
|
||
|
channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 2 }
|
||
|
|
||
|
dcxMACUpChannelIngressCancellation OBJECT-TYPE
|
||
|
SYNTAX INTEGER { disabled(1), tdmaOnly(2), scdmaSec(3), scdmaInc1(4), scdmaInc2(5) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Sets the ingress noise cancellation mode for this
|
||
|
logical channel. Not all modes may be valid for a
|
||
|
given logical channel configuration or hardware."
|
||
|
::= { dcxMACUpstreamChannelEntry 3 }
|
||
|
|
||
|
dcxMACUpChannelGroupId OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The group ID for this logical channel used to associate it
|
||
|
with other upsteams on the same physical network. The group ID
|
||
|
is an index into the dcxMACUpstreamGroupTable which defines common
|
||
|
parameters for grouped upsteams. Upstreams do not have to be
|
||
|
grouped and there may be more than one group on the same physical
|
||
|
network. Spatially diverse upstreams should not have the same group ID."
|
||
|
::= { dcxMACUpstreamChannelEntry 4 }
|
||
|
|
||
|
dcxMACUpChannelShortPollInterval OBJECT-TYPE
|
||
|
SYNTAX TimeInterval (1..100)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The short interval for initial unicast maintanance on this logical
|
||
|
channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 5 }
|
||
|
|
||
|
dcxMACUpChannelPeriodicPollInterval OBJECT-TYPE
|
||
|
SYNTAX TimeInterval (100..10000)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The periodic station maintanance interval on this logical channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 6 }
|
||
|
|
||
|
dcxMACUpChannelInputPowerMode OBJECT-TYPE
|
||
|
SYNTAX INTEGER { fixed(1), automatic(2) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The receiver input power mode for this logical channel. In fixed
|
||
|
mode the input power to the demodulator will remain fixed across
|
||
|
symbol rate changes. In automatic mode the demodulator may vary the
|
||
|
input power for optimal performance."
|
||
|
::= { dcxMACUpstreamChannelEntry 7 }
|
||
|
|
||
|
dcxMACUpChannelPower OBJECT-TYPE
|
||
|
SYNTAX TenthdBmV
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The nominal receiver input power for this logical channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 8 }
|
||
|
|
||
|
dcxMACUpChannelPlantLength OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..320)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The cable length in km to the most distant CM on this logical
|
||
|
upstream."
|
||
|
::= { dcxMACUpstreamChannelEntry 9 }
|
||
|
|
||
|
dcxMACUpChannelMaxCmMapProcTime OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..1000000)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum time in microseconds allowed for modems on this logical
|
||
|
channel to process the Upstream Bandwidth Allocation MAP."
|
||
|
::= { dcxMACUpstreamChannelEntry 10 }
|
||
|
|
||
|
dcxMACUpChannelConcatenation OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enables or disables the use of packet concatenation by Cable Modems on
|
||
|
this logical channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 11 }
|
||
|
|
||
|
dcxMACUpChannelSpMgtTriggerIndex OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..255)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into spectral management trigger table, identical
|
||
|
to dcxMACSpMgtTriggerIndex in that table. All entries with
|
||
|
the same value of dcxMACSpMgtTriggerIndex form a trigger group
|
||
|
all assigned to the same logical upstream channel or group.
|
||
|
Returns 0 if there are no triggers assigned to this logical
|
||
|
channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 12 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelLowPowerOffset OBJECT-TYPE
|
||
|
SYNTAX TenthdBmV (-100..-10)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum power offset of a burst below the nominal
|
||
|
input power to the CMTS that will not cause a RNG-RSP
|
||
|
with status continue. Valid range is from -10 dBmV to
|
||
|
-1 dBmV in 1 dB increments."
|
||
|
DEFVAL { -60 }
|
||
|
::= { dcxMACUpstreamChannelEntry 13 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelHighPowerOffset OBJECT-TYPE
|
||
|
SYNTAX TenthdBmV (10..100)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The maximum power offset of a burst above the nominal
|
||
|
input power to the CMTS that will not cause a RNG-RSP
|
||
|
with status continue. Valid range is from +1 dBmV to
|
||
|
+10 dBmV in 1 dB increments."
|
||
|
DEFVAL { 60 }
|
||
|
::= { dcxMACUpstreamChannelEntry 14 }
|
||
|
|
||
|
dcxMACUpChannelLogSnrAveTimeconstant OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..10)
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The averaging timeconstant used to calculate the per-logical channel
|
||
|
MIB variable docsIfSigQSignalNoise. The averaging uses a logarithmic
|
||
|
scale, so that the actual timeconstant used is 2^X, where X is the
|
||
|
value configured for this object. Increasing the value of X increases
|
||
|
the degree to which the SNR results are averaged over time, and reduces
|
||
|
the sensitivity of the reported channel SNR to local oscillations in
|
||
|
signal quality. Averaging can effectively be disabled by setting this
|
||
|
object to 0"
|
||
|
DEFVAL { 2 }
|
||
|
::= { dcxMACUpstreamChannelEntry 15 }
|
||
|
|
||
|
dcxMACUpChannelImpulseMitigation OBJECT-TYPE
|
||
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Enables or disables impulse noise mitigation for this
|
||
|
logical channel."
|
||
|
::= { dcxMACUpstreamChannelEntry 16 }
|
||
|
|
||
|
dcxMACUpChannelRngPreambleGuardSymbols OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Number of guard symbols before the preamble pilot pattern for
|
||
|
ranging bursts. Guard symbols may help the receiver to mitigate
|
||
|
the effects of ISI and\or help with the detection of bursts with
|
||
|
an early arrival time"
|
||
|
::= { dcxMACUpstreamChannelEntry 17 }
|
||
|
|
||
|
dcxMACUpChannelNrngPreambleGuardSymbols OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Number of guard symbols before the preamble pilot pattern for
|
||
|
non-ranging bursts. Guard symbols may help the receiver to mitigate
|
||
|
the effects of ISI and\or help with the detection of bursts with
|
||
|
an early arrival time"
|
||
|
::= { dcxMACUpstreamChannelEntry 18 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelExtendedFrequencyErrorDetect OBJECT-TYPE
|
||
|
SYNTAX INTEGER { none(0),
|
||
|
initialRanging(1),
|
||
|
periodicRanging(2),
|
||
|
allRanging(3) }
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Offsets in carrier frequency in the modem are corrected by the CMTS
|
||
|
during ranging. Typically most if not all off the frequency error is
|
||
|
removed in the initial ranging response with incremental changes removed
|
||
|
during periodic ranging. If large frequency offsets are expected during
|
||
|
initial or periodic ranging, this value may be configured to provide
|
||
|
extended frequency offset detection and correction."
|
||
|
DEFVAL { none }
|
||
|
::= { dcxMACUpstreamChannelEntry 19 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelLogC3SnrTimeconstant OBJECT-TYPE
|
||
|
SYNTAX Unsigned32
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The averaging timeconstant used to calculate the per-logical channel
|
||
|
MIB variable dcxMACUpChannelSignalNoise. The averaging uses a logarithmic
|
||
|
scale, so that the actual timeconstant used is 2^X, where X is the
|
||
|
value configured for this object. Increasing the value of X increases
|
||
|
the degree to which the SNR results are averaged over time, and reduces
|
||
|
the sensitivity of the reported channel SNR to local oscillations in
|
||
|
signal quality. Averaging can effectively be disabled by setting this
|
||
|
object to 0"
|
||
|
::= { dcxMACUpstreamChannelEntry 20 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelSignalNoise OBJECT-TYPE
|
||
|
SYNTAX TenthdB
|
||
|
UNITS "dB"
|
||
|
MAX-ACCESS read-only
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"A measurement of the average signal/noise ratio for the logical upstream.
|
||
|
The averaging may be controlled using the dcxMACUpChannelLogC3SnrTimeconstant
|
||
|
variable"
|
||
|
::= { dcxMACUpstreamChannelEntry 21 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelSafeConfig OBJECT-TYPE
|
||
|
SYNTAX TruthValue
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"If true, MIB SETs which would cause this logical channel to go offline will return
|
||
|
a failure"
|
||
|
::= { dcxMACUpstreamChannelEntry 22 }
|
||
|
|
||
|
|
||
|
dcxMACUpChannelInitialRangingDelay OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (300..3000)
|
||
|
UNITS "microseconds"
|
||
|
MAX-ACCESS read-write
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The number of extra microseconds to allow in a broadcast IUC3
|
||
|
grant to compensate for modems that perform initial ranging later
|
||
|
than expected."
|
||
|
::= { dcxMACUpstreamChannelEntry 23 }
|
||
|
|
||
|
dcxMACUpstreamGroupTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACUpstreamGroupEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Entries containing definitions for group IDs
|
||
|
that can be associated with an upstream channel."
|
||
|
::= { dcxMACObjects 4 }
|
||
|
|
||
|
dcxMACUpstreamGroupEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACUpstreamGroupEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"dcxMACUpstreamGroupEntry"
|
||
|
INDEX {
|
||
|
dcxMACUpstreamGroupId
|
||
|
}
|
||
|
::= { dcxMACUpstreamGroupTable 1 }
|
||
|
|
||
|
DcxMACUpstreamGroupEntry ::= SEQUENCE {
|
||
|
dcxMACUpstreamGroupId Unsigned32,
|
||
|
dcxMACUpstreamGroupName OCTET STRING,
|
||
|
dcxMACUpstreamGroupLoadBalancing INTEGER,
|
||
|
dcxMACUpstreamGroupFrequencyIndex Unsigned32,
|
||
|
dcxMACUpstreamGroupSpMgtTriggerIndex Unsigned32,
|
||
|
dcxMACUpstreamGroupStatus RowStatus
|
||
|
}
|
||
|
|
||
|
dcxMACUpstreamGroupId OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..255)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The ID for this group."
|
||
|
::= { dcxMACUpstreamGroupEntry 1 }
|
||
|
|
||
|
dcxMACUpstreamGroupName OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING (SIZE(1..63))
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The name associated with this group"
|
||
|
::= { dcxMACUpstreamGroupEntry 2 }
|
||
|
|
||
|
dcxMACUpstreamGroupLoadBalancing OBJECT-TYPE
|
||
|
SYNTAX INTEGER { none(1), initialNumeric(2), periodic(3) }
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Configures upstream load balancing for the group.
|
||
|
Options are: none, initialNumeric, periodic.
|
||
|
If set to none, no load balancing will be performed.
|
||
|
If set to initialNumeric, the CMTS may redirect modems to other active upstream
|
||
|
channels in the same group by setting the upstream channel ID override in the
|
||
|
RNG-RSP at any time up to the point where the modem successfully completes
|
||
|
periodic ranging. Once a modem has completed ranging it must be reset before it
|
||
|
may be moved to another upstream. The modems in a group will be distributed
|
||
|
evenly and numerically across the active channels in the group. When a modems
|
||
|
performs initial ranging, it will be sent to the upsteam with the least number
|
||
|
of active modems if the number of active modems on the current upsteam is greater
|
||
|
than the average number of modems per upsteam in the group. All channels are
|
||
|
treated equally when calculating loads.
|
||
|
If a modem fails to range on the desired channel following a ranging overide,
|
||
|
it will be allowed to remain on the channel on which it next performs initial
|
||
|
ranging.
|
||
|
If set to periodic, modems will be numerically distributed during initial ranging
|
||
|
and then selectively moved after registration using UCC. Periodic load balancing
|
||
|
will attempt to distribute the modems to maintain even bandwidth utilization across
|
||
|
the channels in a group."
|
||
|
DEFVAL { none }
|
||
|
::= { dcxMACUpstreamGroupEntry 3 }
|
||
|
|
||
|
dcxMACUpstreamGroupFrequencyIndex OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..255)
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into upstream frequency table, identical to
|
||
|
dcxMACUpstreamFrequencyIndex in that table. All entries
|
||
|
with the same value of dcxMACUpstreamFrequencyIndex form
|
||
|
a spectral frequency group all assigned to the same
|
||
|
upstream group. Returns 0 if there are no triggers assigned
|
||
|
to this group."
|
||
|
::= { dcxMACUpstreamGroupEntry 4 }
|
||
|
|
||
|
dcxMACUpstreamGroupSpMgtTriggerIndex OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..255)
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into spectral management trigger table, identical
|
||
|
to dcxMACSpMgtTriggerIndex in that table. All entries with
|
||
|
the same value of dcxMACSpMgtTriggerIndex form a trigger group
|
||
|
all assigned to the same upstream group or channel. Returns 0 if
|
||
|
there are no triggers assigned to this group."
|
||
|
::= { dcxMACUpstreamGroupEntry 5 }
|
||
|
|
||
|
dcxMACUpstreamGroupStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Used to create rows in this table"
|
||
|
::= { dcxMACUpstreamGroupEntry 6 }
|
||
|
|
||
|
|
||
|
|
||
|
dcxMACUpstreamFrequencyTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACUpstreamFrequencyEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Describes the upstream spectrum available for use by one or more
|
||
|
upstream groups. Entries are grouped by dcxMACUpstreamFrequencyIndex,
|
||
|
with each group assigned to one or more upstream groups."
|
||
|
::= { dcxMACObjects 5 }
|
||
|
|
||
|
dcxMACUpstreamFrequencyEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACUpstreamFrequencyEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Describes a single contiguous region of upstream spectrum, available for
|
||
|
use by one or more upstream spectral groups."
|
||
|
INDEX { dcxMACUpstreamFrequencyIndex, dcxMACUpstreamFrequencyRegion }
|
||
|
::= { dcxMACUpstreamFrequencyTable 1 }
|
||
|
|
||
|
DcxMACUpstreamFrequencyEntry ::= SEQUENCE {
|
||
|
dcxMACUpstreamFrequencyIndex Unsigned32,
|
||
|
dcxMACUpstreamFrequencyRegion Unsigned32,
|
||
|
dcxMACUpstreamFrequencyStart Integer32,
|
||
|
dcxMACUpstreamFrequencyStop Integer32,
|
||
|
dcxMACUpstreamFrequencyStatus RowStatus
|
||
|
}
|
||
|
|
||
|
dcxMACUpstreamFrequencyIndex OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..255)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into the upstream frequency table representing
|
||
|
a group of spectral regions, all associated with the
|
||
|
same upstream spectral group."
|
||
|
::= { dcxMACUpstreamFrequencyEntry 1 }
|
||
|
|
||
|
dcxMACUpstreamFrequencyRegion OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..255)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into the upstream frequency table which, when
|
||
|
grouped with other frequency regions with the same frequency
|
||
|
index fully describe the upstream frequency spectrum available
|
||
|
for use by a given spectral group."
|
||
|
::= { dcxMACUpstreamFrequencyEntry 2 }
|
||
|
|
||
|
dcxMACUpstreamFrequencyStart OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
UNITS "hertz"
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The start frequency for this upstream spectral region."
|
||
|
::= { dcxMACUpstreamFrequencyEntry 3 }
|
||
|
|
||
|
dcxMACUpstreamFrequencyStop OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
UNITS "hertz"
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"The stop frequency for this upstream spectral region."
|
||
|
::= { dcxMACUpstreamFrequencyEntry 4 }
|
||
|
|
||
|
dcxMACUpstreamFrequencyStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Used to create entries in this table."
|
||
|
::= { dcxMACUpstreamFrequencyEntry 5 }
|
||
|
|
||
|
|
||
|
dcxMACSpectralMgtObjects OBJECT IDENTIFIER ::= { dcxMACObjects 6 }
|
||
|
|
||
|
dcxMACSpectralMgtTriggerTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACSpectralMgtTriggerEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Describes the spectral management triggers assigned to one
|
||
|
or more upstream groups or channels. Entries are grouped by
|
||
|
dcxMACSpMgtTriggerIndex, with each group assigned to one or more
|
||
|
upstream channels or groups."
|
||
|
::= { dcxMACSpectralMgtObjects 1 }
|
||
|
|
||
|
dcxMACSpectralMgtTriggerEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACSpectralMgtTriggerEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Describes a single spectral management trigger, available for
|
||
|
use by one or more upstream channels or spectral groups."
|
||
|
INDEX { dcxMACSpMgtTriggerIndex, dcxMACSpMgtTriggerNumber }
|
||
|
::= { dcxMACSpectralMgtTriggerTable 1 }
|
||
|
|
||
|
DcxMACSpectralMgtTriggerEntry::= SEQUENCE {
|
||
|
dcxMACSpMgtTriggerIndex Unsigned32,
|
||
|
dcxMACSpMgtTriggerNumber Unsigned32,
|
||
|
dcxMACSpMgtTriggerType Integer32,
|
||
|
dcxMACSpMgtTriggerAction Unsigned32,
|
||
|
dcxMACSpMgtTriggerParam1 Integer32,
|
||
|
dcxMACSpMgtTriggerParam2 Integer32,
|
||
|
dcxMACSpMgtTriggerParam3 Integer32,
|
||
|
dcxMACSpMgtTriggerParam4 Integer32,
|
||
|
dcxMACSpMgtTriggerParam5 Integer32,
|
||
|
dcxMACSpMgtTriggerParam6 Integer32,
|
||
|
dcxMACSpMgtTriggerParam7 Integer32,
|
||
|
dcxMACSpMgtTriggerParam8 Integer32,
|
||
|
dcxMACSpMgtTriggerStatus RowStatus
|
||
|
}
|
||
|
|
||
|
dcxMACSpMgtTriggerIndex OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (0..255)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into the spectral managment trigger table
|
||
|
representing a group of triggers, all assigned to
|
||
|
the same upstream channel or spectral group."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 1 }
|
||
|
|
||
|
dcxMACSpMgtTriggerNumber OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..255)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into the spectral managment trigger table which,
|
||
|
when grouped with other triggers with the same trigger
|
||
|
index fully describe the spectral mangement triggers
|
||
|
assigned to the same upstream channel or spectral group."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 2 }
|
||
|
|
||
|
dcxMACSpMgtTriggerType OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Identifies the trigger type represented by this entry."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 3 }
|
||
|
|
||
|
dcxMACSpMgtTriggerAction OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..255)
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into the spectral management action table,
|
||
|
identical to dcxMACSpMgtActionIndex in that table,
|
||
|
identifying the action to take if this trigger is
|
||
|
invoked. Returns 0 if there is no action associated
|
||
|
with this trigger."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 4 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam1 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 5 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam2 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 6 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam3 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 7 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam4 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 8 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam5 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 9 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam6 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 10 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam7 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 11 }
|
||
|
|
||
|
dcxMACSpMgtTriggerParam8 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on trigger type."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 12 }
|
||
|
|
||
|
dcxMACSpMgtTriggerStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Used to create and control the status of entries in this table."
|
||
|
::= { dcxMACSpectralMgtTriggerEntry 13 }
|
||
|
|
||
|
|
||
|
|
||
|
dcxMACSpectralMgtActionTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACSpectralMgtActionEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Describes the spectral management actions assigned to one
|
||
|
or more spectral managment triggers."
|
||
|
::= { dcxMACSpectralMgtObjects 2 }
|
||
|
|
||
|
dcxMACSpectralMgtActionEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACSpectralMgtActionEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Describes a single spectral management action, assigned to
|
||
|
one or more spectral management triggers."
|
||
|
INDEX { dcxMACSpMgtActionIndex }
|
||
|
::= { dcxMACSpectralMgtActionTable 1 }
|
||
|
|
||
|
DcxMACSpectralMgtActionEntry::= SEQUENCE {
|
||
|
dcxMACSpMgtActionIndex Unsigned32,
|
||
|
dcxMACSpMgtActionType Integer32,
|
||
|
dcxMACSpMgtActionParam1 Integer32,
|
||
|
dcxMACSpMgtActionParam2 Integer32,
|
||
|
dcxMACSpMgtActionParam3 Integer32,
|
||
|
dcxMACSpMgtActionParam4 Integer32,
|
||
|
dcxMACSpMgtActionParam5 Integer32,
|
||
|
dcxMACSpMgtActionParam6 Integer32,
|
||
|
dcxMACSpMgtActionParam7 Integer32,
|
||
|
dcxMACSpMgtActionParam8 Integer32,
|
||
|
dcxMACSpMgtActionStatus RowStatus
|
||
|
}
|
||
|
|
||
|
dcxMACSpMgtActionIndex OBJECT-TYPE
|
||
|
SYNTAX Unsigned32 (1..255)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"An index into the spectral managment actions table
|
||
|
used to assign actions to spectral management triggers."
|
||
|
::= { dcxMACSpectralMgtActionEntry 1 }
|
||
|
|
||
|
dcxMACSpMgtActionType OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Identifies the action type represented by this entry."
|
||
|
::= { dcxMACSpectralMgtActionEntry 2 }
|
||
|
|
||
|
dcxMACSpMgtActionParam1 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 3 }
|
||
|
|
||
|
dcxMACSpMgtActionParam2 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 4 }
|
||
|
|
||
|
dcxMACSpMgtActionParam3 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 5 }
|
||
|
|
||
|
dcxMACSpMgtActionParam4 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 6 }
|
||
|
|
||
|
dcxMACSpMgtActionParam5 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 7 }
|
||
|
|
||
|
dcxMACSpMgtActionParam6 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 8 }
|
||
|
|
||
|
dcxMACSpMgtActionParam7 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 9 }
|
||
|
|
||
|
dcxMACSpMgtActionParam8 OBJECT-TYPE
|
||
|
SYNTAX Integer32
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Parameter dependent on action type."
|
||
|
::= { dcxMACSpectralMgtActionEntry 10 }
|
||
|
|
||
|
dcxMACSpMgtActionStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Used to create and control the status of entries in this table."
|
||
|
::= { dcxMACSpectralMgtActionEntry 11 }
|
||
|
|
||
|
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||
|
-- Shared Secret configuration
|
||
|
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||
|
|
||
|
dcxMACSharedSecretTable OBJECT-TYPE
|
||
|
SYNTAX SEQUENCE OF DcxMACSharedSecretEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Set up shared secrets for this DOCSIS MAC Interface"
|
||
|
::= { dcxMACObjects 7 }
|
||
|
|
||
|
dcxMACSharedSecretEntry OBJECT-TYPE
|
||
|
SYNTAX DcxMACSharedSecretEntry
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"dcxMACSharedSecretEntry"
|
||
|
INDEX {ifIndex, dcxMACSharedSecretId}
|
||
|
::= { dcxMACSharedSecretTable 1 }
|
||
|
|
||
|
DcxMACSharedSecretEntry ::= SEQUENCE {
|
||
|
dcxMACSharedSecretId Integer32,
|
||
|
dcxMACSharedSecretStr DisplayString,
|
||
|
dcxMACSharedSecretStatus RowStatus
|
||
|
}
|
||
|
|
||
|
dcxMACSharedSecretId OBJECT-TYPE
|
||
|
SYNTAX Integer32 (1..16)
|
||
|
MAX-ACCESS not-accessible
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"ID for the associated shared secret."
|
||
|
::= { dcxMACSharedSecretEntry 1 }
|
||
|
|
||
|
dcxMACSharedSecretStr OBJECT-TYPE
|
||
|
SYNTAX DisplayString
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"This is the shared secret itself, which is considered write-only. It can be SET
|
||
|
but when a GET operation is performed the value is not returned."
|
||
|
::= { dcxMACSharedSecretEntry 2 }
|
||
|
|
||
|
dcxMACSharedSecretStatus OBJECT-TYPE
|
||
|
SYNTAX RowStatus
|
||
|
MAX-ACCESS read-create
|
||
|
STATUS current
|
||
|
DESCRIPTION
|
||
|
"Row status."
|
||
|
::= { dcxMACSharedSecretEntry 3 }
|
||
|
|
||
|
END
|