mibs/MIBS/audiocodes/AcPerfH323SIPGateway

348 lines
9.4 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
AcPerfH323SIPGateway DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY FROM SNMPv2-SMI
enterprises FROM SNMPv2-SMI;
audioCodes OBJECT IDENTIFIER ::= {enterprises 5003}
acRegistrations OBJECT IDENTIFIER ::= {audioCodes 7}
acGeneric OBJECT IDENTIFIER ::= {audioCodes 8}
acProducts OBJECT IDENTIFIER ::= {audioCodes 9}
acPerformance OBJECT IDENTIFIER ::= {audioCodes 10}
acPerfH323SIPGateway MODULE-IDENTITY
LAST-UPDATED "200511031451Z" --Thursday, November 03, 2005
ORGANIZATION "AudioCodes Ltd"
CONTACT-INFO
"Postal: AudioCodes LTD
4 Horesh Road
Yehud 56470, ISRAEL
Tel: 972-3-5394000
Email: support@audiocodes.com"
DESCRIPTION
"This MIB defines the enterprise-specific objects needed
to support performance management of the AudioCodes product.
Performance measurements are grouped into the following MIB trees:
acPerfIvr - performance measurements related to the IVR service
acPerfBct - performance measurements related to the BCT service
acPerfConf - performance measurements related to the Conferencing service
acPerfTt - performance measurements related to the Test Trunk service"
REVISION "200311200000Z"
DESCRIPTION
"Version 4.4. November 20, 2003. Made these changes:
o Initial revision"
::= {acPerformance 3}
--
-- Abbreviations used:
-- Annc announcement(s)
-- IVR Interactive Voice Response
-- Conf Conferencing
-- NE network element
-- TT Test Trunks
--
-- The following conventions are used in this MIB:
-- The "Product" attribute lists the products in which the
-- performance measurement is maintained. Current products
-- are:
--
-- Media Servers
-- IPmedia 2000
-- Media Gateways
-- Mediant 2000/5000/8000 (wireline)
-- Stretto 2000/5000/8000 (wireless)
--
-- The "Capabilities" attribute lists the capabilities that must be
-- configured on the system for the performance measurement to be
-- maintained. The possible values are IVR, Conferencing, BCT, TT
-- and Trunking Gateway. Some performance measurements are not
-- related to any particular capabilities. In those cases, the value
-- of Capabilities attribute is "All".
--
-- Notes on IVR Service Performance Measurements
--
-- In response to a request to play an announcement, the media server
-- may play multiple audio segments. The media server maintains
-- performance data for the overall announcement request as well as
-- for the individual segments.
-- In naming of the performance measurements, "Play" is used to refer
-- to the overall announcement request. "PlaySegment" is used to refer
-- to the playing of an individual segment.
--
-- Notes on Play Collect
--
-- Play Collect involves playing of an initial prompt, collection of digits, followed
-- by actions which are dependent on the digits (or lack of digits) that are collected.
-- These are the prompts that can be specified (all are optional):
--
-- ip initial prompt
-- nd no digits reprompt (if not specified, use rp)
-- rp reprompt (if not specified, use ip)
-- fa failure, played once at end
-- sa success, played once at end
--
-- The request can specify the number of attempts, before playing the fa prompt. If no
-- number of attempts value is supplied on the request, then a default is used.
--
-- The prompts can be either simple or complex announcements.
--
-- Continuous Digit Collect operations, which can be considered a special type of play
-- collect, are not tracked by any of the acPlayCollect performance measurements,
-- but are instead tracked in a special group of performance measurements.
--
-- Notes on Continuous Digit Collect
--
-- Continuous Digit Collect - Digits are collected during the entire
-- life of a call. No prompts are played. Continuous Digit Collect
-- is typically used in a BCT call.
--
-- Continuous Digit Collect operations can be considered a special type of play
-- collect, but are not tracked by any of the acPlayCollect performance measurements.
acPerfH323SIPGWCommon OBJECT IDENTIFIER ::= {acPerfH323SIPGateway 1}
acPerfH323SIPGWCalls OBJECT IDENTIFIER ::= {acPerfH323SIPGWCommon 1}
acPerfTel2IP OBJECT IDENTIFIER ::= {acPerfH323SIPGWCalls 1}
acPerfTel2IPAttemptedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Attempted SIP/H323 calls."
::= {acPerfTel2IP 1}
acPerfTel2IPEstablishedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of established (connected and voice activated) SIP/H323 calls."
::= {acPerfTel2IP 2}
acPerfTel2IPBusyCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Destination Busy SIP/H323 calls."
::= {acPerfTel2IP 3}
acPerfTel2IPNoAnswerCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of No Answer SIP/H323 calls."
::= {acPerfTel2IP 4}
acPerfTel2IPNoRouteCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of No Route SIP/H323 calls. Most likely to be due to wrong number."
::= {acPerfTel2IP 5}
acPerfTel2IPNoMatchCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of No capability match between peers on SIP/H323 calls."
::= {acPerfTel2IP 6}
acPerfTel2IPFailCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fax attempted SIP/H323 calls."
::= {acPerfTel2IP 7}
acPerfTel2IPFaxAttemptedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Attempted SIP/H323 calls."
::= {acPerfTel2IP 8}
acPerfTel2IPFaxSuccessCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Attempted SIP/H323 fax success calls."
::= {acPerfTel2IP 9}
acPerfTel2IPTotalDuration OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"total duration of SIP/H323 calls."
::= {acPerfTel2IP 10}
acPerfIP2Tel OBJECT IDENTIFIER ::= {acPerfH323SIPGWCalls 2}
acPerfIP2TelAttemptedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Attempted SIP/H323 calls."
::= {acPerfIP2Tel 1}
acPerfIP2TelEstablishedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of established (connected and voice activated) SIP/H323 calls."
::= {acPerfIP2Tel 2}
acPerfIP2TelBusyCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Destination Busy SIP/H323 calls."
::= {acPerfIP2Tel 3}
acPerfIP2TelNoAnswerCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of No Answer SIP/H323 calls."
::= {acPerfIP2Tel 4}
acPerfIP2TelNoRouteCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of No Route SIP/H323 calls. Most likely to be due to wrong number."
::= {acPerfIP2Tel 5}
acPerfIP2TelNoMatchCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of No capability match between peers on SIP/H323 calls."
::= {acPerfIP2Tel 6}
acPerfIP2TelFailCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fax attempted SIP/H323 calls."
::= {acPerfIP2Tel 7}
acPerfIP2TelFaxAttemptedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Attempted SIP/H323 calls."
::= {acPerfIP2Tel 8}
acPerfIP2TelFaxSuccessCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Attempted SIP/H323 fax success calls."
::= {acPerfIP2Tel 9}
acPerfIP2TelTotalDuration OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"total duration of SIP/H323 calls."
::= {acPerfIP2Tel 10}
END