mibs/MIBS/bktel/BKTEL-HFC862-BES-V01-MIB

812 lines
24 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
--- ****************************************************************************
-- *
-- * Description: Implements definitions for the BK-Ethernet-Switch-modules
-- *
-- * Copyright 2007 by BKtel communications GmbH
-- *
-- *
-- * V.0.1 12.05.2006 M. Heldmann first draft
-- * V.0.2 04.10.2006 M. Heldmann NESlotWriteValue expanded due to new 2G6 platform needs
-- * V.1.0 11.05.2007 M. Heldmann renamed this module from "bkswitch" to "bkbes"
-- * added a couple of parameters
-- * V.1.1 11.07.2013 M. Heldmann adjusted syntax of "CommonEntry" to remove MIB compiler warnings
-- * V.1.2 05.09.2014 M. Heldmann changed CommonModuleWidth and ConfigNESlotWrite STATUS to optional
-- ****************************************************************************
BKTEL-HFC862-BES-V01-MIB DEFINITIONS ::= BEGIN
IMPORTS
experimental, enterprises, TimeTicks, IpAddress, Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
modules, DisplayString, TruthValue, PerceivedSeverityValue, NESlotValue, ModuleWidthValue
FROM BKTEL-HFC862-BASE-MIB
;
bes OBJECT IDENTIFIER ::= { modules 114 }
besCommon OBJECT IDENTIFIER ::= { bes 1 }
besStates OBJECT IDENTIFIER ::= { bes 2 }
besConfiguration OBJECT IDENTIFIER ::= { bes 3 }
besControl OBJECT IDENTIFIER ::= { bes 4 }
besMeasuringValues OBJECT IDENTIFIER ::= { bes 5 }
besDisplay OBJECT IDENTIFIER ::= { bes 6 }
besDisplayPorts OBJECT IDENTIFIER ::= { bes 56 }
--
-- Type definitions
--
PortType ::= INTEGER
{
typeCopper(1),
typeFiber(2)
}
PortLinkState ::= INTEGER
{
linkDown(1),
linkUp(2)
}
PortStatus ::= INTEGER
{
statusUnknown(1),
statusInit(2),
statusValid(3),
statusBusy(4),
statusEmpty(5),
statusInvalid(6),
statusLossOfSignal(7)
}
PortDuplexMode ::= INTEGER
{
duplexFull(1),
duplexHalf(2)
}
PortSpeed ::= INTEGER
{
speedUnknown(0),
speed10Mbps(10),
speed100Mbps(100),
speed1000Mbps(1000)
}
PortFlowControl ::= INTEGER
{
flowControlDisabled(1),
flowControlEnabled(2)
}
NESlotWriteValue ::= INTEGER (-1..99)
-- MibCompiler defs --
-- $idx$: besDisplayConfiguration
-- MibCompiler defs --
--*****************************************************************************************
-- BES (BK Ethernet Switch)
--*****************************************************************************************
-- besCommon group
besCommonNumberOfModules OBJECT-TYPE
SYNTAX INTEGER(0..50)
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number of modules in table."
::= { besCommon 1 }
besCommonTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesCommonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The table contains all modules of the BES-type in the NE"
::= { besCommon 2 }
-- table of states entry(ro/rw)
besCommonEntry OBJECT-TYPE
SYNTAX BesCommonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Common-Values for a module."
INDEX { besNESlot }
::= { besCommonTable 1 }
-- the structure of the entry
BesCommonEntry ::= SEQUENCE
{
besNESlot NESlotValue,
besCommonType DisplayString,
besCommonDescr DisplayString,
besCommonFirmwareId DisplayString,
besCommonModuleWidth ModuleWidthValue
}
besNESlot OBJECT-TYPE
SYNTAX NESlotValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number of the chassis for which this
entry contains management information."
::= { besCommonEntry 1 }
besCommonType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of physical module. modSlotEmpty indicates
an empty slot. A Value of modSlotUnknown indicates
that the type of module is unknown."
::= { besCommonEntry 2 }
besCommonDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A textual description of the module.
If not available, this Value should be
set to a zero length string."
::= { besCommonEntry 3 }
besCommonFirmwareId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The firmware Id of the module."
::= { besCommonEntry 4 }
besCommonModuleWidth OBJECT-TYPE
SYNTAX ModuleWidthValue
ACCESS read-only
STATUS optional
DESCRIPTION "The width of the module in multiples of slots (1, 2, ...)"
::= { besCommonEntry 5 }
--*****************************************************************************************
-- besMeasuringValues group
-- table of measuring Values
besMeasuringValuesTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesMeasuringValuesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { besMeasuringValues 1 }
-- table of measuring Values entry
besMeasuringValuesEntry OBJECT-TYPE
SYNTAX BesMeasuringValuesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Common-Values for a module."
INDEX { besNESlot }
::= { besMeasuringValuesTable 1 }
-- the structure of the entry
BesMeasuringValuesEntry ::= SEQUENCE
{
besTemperatureLoLo INTEGER,
besTemperatureLo INTEGER,
besTemperatureValue INTEGER,
besTemperatureHi INTEGER,
besTemperatureHiHi INTEGER,
besInputVoltageLoLo INTEGER,
besInputVoltageLo INTEGER,
besInputVoltageValue INTEGER,
besInputVoltageHi INTEGER,
besInputVoltageHiHi INTEGER
}
-- *****
besTemperatureLoLo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature low alarm threshold in 0.1 celsius degrees."
::= { besMeasuringValuesEntry 1 }
besTemperatureLo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature low warning threshold in 0.1 celsius degrees."
::= { besMeasuringValuesEntry 2 }
besTemperatureValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature in 0.1 celsius degrees."
::= { besMeasuringValuesEntry 3 }
besTemperatureHi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature high warning threshold in 0.1 celsius degrees."
::= { besMeasuringValuesEntry 4 }
besTemperatureHiHi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature high alarm threshold in 0.1 celsius degrees."
::= { besMeasuringValuesEntry 5 }
-- *****
besInputVoltageLoLo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The input supply voltage low alarm threshold in steps of 0.1 Volts."
::= { besMeasuringValuesEntry 6 }
besInputVoltageLo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The input supply voltage low warning threshold in steps of 0.1 Volts."
::= { besMeasuringValuesEntry 7 }
besInputVoltageValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The input supply voltage in steps of 0.1 Volts.
Input supply voltage nominal value, see 'besDisplayInputVoltageNominal'"
::= { besMeasuringValuesEntry 8 }
besInputVoltageHi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The input supply voltage high warning threshold in steps of 0.1 Volts."
::= { besMeasuringValuesEntry 9 }
besInputVoltageHiHi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The input supply voltage high alarm threshold in steps of 0.1 Volts."
::= { besMeasuringValuesEntry 10 }
--*****************************************************************************************
-- besStates group
-- Note: For every control OId there must be a correspondant alarm OId!
besStatesTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesStatesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { besStates 1 }
-- table of states entry(ro/rw)
besStatesEntry OBJECT-TYPE
SYNTAX BesStatesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Alarms for a module."
INDEX { besNESlot }
::= { besStatesTable 1 }
-- the structure of the entry
BesStatesEntry ::= SEQUENCE
{
besStatesBootloader PerceivedSeverityValue,
besStatesCommLoss PerceivedSeverityValue,
besStatesTemperatureLow PerceivedSeverityValue,
besStatesTemperatureHigh PerceivedSeverityValue,
besStatesInputVoltageLow PerceivedSeverityValue,
besStatesInputVoltageHigh PerceivedSeverityValue
}
besStatesBootloader OBJECT-TYPE
SYNTAX PerceivedSeverityValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The device is running in bootloader mode
without a legal application software."
::= { besStatesEntry 1 }
besStatesCommLoss OBJECT-TYPE
SYNTAX PerceivedSeverityValue
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NEC has lost the connection to the device.
Reason may be a removed or defective device.
Note that this state is set by the NEC and not
by the device"
::= { besStatesEntry 2 }
besStatesTemperatureLow OBJECT-TYPE
SYNTAX PerceivedSeverityValue
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature low"
::= { besStatesEntry 3 }
besStatesTemperatureHigh OBJECT-TYPE
SYNTAX PerceivedSeverityValue
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device temperature high"
::= { besStatesEntry 4 }
besStatesInputVoltageLow OBJECT-TYPE
SYNTAX PerceivedSeverityValue
ACCESS read-only
STATUS mandatory
DESCRIPTION "Input supply voltage low"
::= { besStatesEntry 5 }
besStatesInputVoltageHigh OBJECT-TYPE
SYNTAX PerceivedSeverityValue
ACCESS read-only
STATUS mandatory
DESCRIPTION "Input supply voltage high"
::= { besStatesEntry 6 }
--*****************************************************************************************
-- besControl group
besControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { besControl 1 }
-- table of control entry(ro/rw)
besControlEntry OBJECT-TYPE
SYNTAX BesControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Alarms for a module."
INDEX { besNESlot }
::= { besControlTable 1 }
-- the structure of the entry
BesControlEntry ::= SEQUENCE
{
besControlReset TruthValue,
besControlModuleLedBlink TruthValue
}
besControlReset OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION "Reset the module."
::= { besControlEntry 1 }
besControlModuleLedBlink OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS mandatory
DESCRIPTION "Writing this variable to true(1) lets the device's
modul LED blink green for 10 seconds.
Writing this variable to false(2) stbes blinking at once.
This variable always returns false(2) on read requests"
::= { besControlEntry 2 }
--*****************************************************************************************
-- besConfiguration group
besConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { besConfiguration 1 }
-- table of configuration entry(ro/rw)
besConfigurationEntry OBJECT-TYPE
SYNTAX BesConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { besNESlot }
::= { besConfigurationTable 1 }
-- the structure of the entry
BesConfigurationEntry ::= SEQUENCE
{
besConfigNESlotWrite NESlotWriteValue,
besConfigConfigurationIndex INTEGER,
besConfigConfiguration DisplayString
}
-- Common part
besConfigNESlotWrite OBJECT-TYPE
SYNTAX NESlotWriteValue
ACCESS read-write
STATUS optional
DESCRIPTION "By writing this variable a slot can be assigned
for devices that dont support hardware slot detection.
Reading '-1' means that the slot position is NOT writable."
::= { besConfigurationEntry 1 }
besConfigConfigurationIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "Index of the active configuration (1..besDisplayNumberOfConfigs)"
::= { besConfigurationEntry 2 }
besConfigConfiguration OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of the active configuration"
::= { besConfigurationEntry 3 }
--*****************************************************************************************
-- Display group
besDisplayTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesDisplayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { besDisplay 1 }
-- table of configuration entry(ro/rw)
besDisplayEntry OBJECT-TYPE
SYNTAX BesDisplayEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { besNESlot }
::= { besDisplayTable 1 }
-- the structure of the entry
BesDisplayEntry ::= SEQUENCE
{
besDisplayNumberOfPorts INTEGER,
besDisplayInputVoltageNominal INTEGER,
besDisplayNumberOfConfigs INTEGER,
besDisplayConfiguration1 DisplayString,
besDisplayConfiguration2 DisplayString,
besDisplayConfiguration3 DisplayString,
besDisplayConfiguration4 DisplayString,
besDisplayConfiguration5 DisplayString,
besDisplayConfiguration6 DisplayString,
besDisplayConfiguration7 DisplayString,
besDisplayConfiguration8 DisplayString,
besDisplayConfiguration9 DisplayString,
besDisplayConfiguration10 DisplayString,
besDisplayConfiguration11 DisplayString,
besDisplayConfiguration12 DisplayString,
besDisplayConfiguration13 DisplayString,
besDisplayConfiguration14 DisplayString,
besDisplayConfiguration15 DisplayString,
besDisplayConfiguration16 DisplayString
}
besDisplayNumberOfPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports"
::={ besDisplayEntry 1 }
besDisplayInputVoltageNominal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal value of input voltage in 0.1 V units."
::={ besDisplayEntry 2 }
besDisplayNumberOfConfigs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of different configurations supplied"
::={ besDisplayEntry 3 }
besDisplayConfiguration1 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #1"
::= { besDisplayEntry 4 }
besDisplayConfiguration2 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #2"
::= { besDisplayEntry 5 }
besDisplayConfiguration3 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #3"
::= { besDisplayEntry 6 }
besDisplayConfiguration4 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #4"
::= { besDisplayEntry 7 }
besDisplayConfiguration5 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #5"
::= { besDisplayEntry 8 }
besDisplayConfiguration6 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #6"
::= { besDisplayEntry 9 }
besDisplayConfiguration7 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #7"
::= { besDisplayEntry 10 }
besDisplayConfiguration8 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #8"
::= { besDisplayEntry 11 }
besDisplayConfiguration9 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #9"
::= { besDisplayEntry 12 }
besDisplayConfiguration10 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #10"
::= { besDisplayEntry 13 }
besDisplayConfiguration11 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #11"
::= { besDisplayEntry 14 }
besDisplayConfiguration12 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #12"
::= { besDisplayEntry 15 }
besDisplayConfiguration13 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #13"
::= { besDisplayEntry 16 }
besDisplayConfiguration14 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #14"
::= { besDisplayEntry 17 }
besDisplayConfiguration15 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #15"
::= { besDisplayEntry 18 }
besDisplayConfiguration16 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "Description of configuration no. #16"
::= { besDisplayEntry 19 }
--*****************************************************************************************
-- DisplayPorts group
-- MibCompiler defs --
-- $suboids$: 56,1
-- MibCompiler defs --
besDisplayPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BesDisplayPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
::= { besDisplayPorts 1 }
-- table of configuration entry(ro/rw)
besDisplayPortsEntry OBJECT-TYPE
SYNTAX BesDisplayPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION ""
INDEX { besNESlot, besDisplayPortsPortIndex }
::= { besDisplayPortsTable 1 }
-- the structure of the entry
BesDisplayPortsEntry ::= SEQUENCE
{
besDisplayPortsPortIndex INTEGER,
besDisplayPortsPortName DisplayString,
besDisplayPortsType PortType,
besDisplayPortsLinkState PortLinkState,
besDisplayPortsStatus PortStatus,
besDisplayPortsDuplexMode PortDuplexMode,
besDisplayPortsSpeed PortSpeed,
besDisplayPortsFlowControl PortFlowControl,
besDisplayPortsFiberTxDistance INTEGER,
besDisplayPortsFiberTxWavelen INTEGER,
besDisplayPortsFiberRxWavelenMin INTEGER,
besDisplayPortsFiberRxWavelenMax INTEGER,
besDisplayPortsFiberSfpData DisplayString
}
besDisplayPortsPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port index (1..besDisplayNumberOfPorts)"
::={ besDisplayPortsEntry 1 }
besDisplayPortsPortName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port name"
::={ besDisplayPortsEntry 2 }
besDisplayPortsType OBJECT-TYPE
SYNTAX PortType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port type"
::={ besDisplayPortsEntry 3 }
besDisplayPortsLinkState OBJECT-TYPE
SYNTAX PortLinkState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port link status"
::={ besDisplayPortsEntry 4 }
besDisplayPortsStatus OBJECT-TYPE
SYNTAX PortStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port status"
::={ besDisplayPortsEntry 5 }
besDisplayPortsDuplexMode OBJECT-TYPE
SYNTAX PortDuplexMode
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port duplex mode"
::={ besDisplayPortsEntry 6 }
besDisplayPortsSpeed OBJECT-TYPE
SYNTAX PortSpeed
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port speed"
::={ besDisplayPortsEntry 7 }
besDisplayPortsFlowControl OBJECT-TYPE
SYNTAX PortFlowControl
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port speed"
::={ besDisplayPortsEntry 8 }
besDisplayPortsFiberTxDistance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port transmission distance in units of km (Fiber ports only)"
::={ besDisplayPortsEntry 9 }
besDisplayPortsFiberTxWavelen OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port transmission wavelength in units of nm (Fiber ports only)"
::={ besDisplayPortsEntry 10 }
besDisplayPortsFiberRxWavelenMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port minimum receive wavelength in units of nm (Fiber ports only)"
::={ besDisplayPortsEntry 11 }
besDisplayPortsFiberRxWavelenMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port maximum receive wavelength in units of nm (Fiber ports only)"
::={ besDisplayPortsEntry 12 }
besDisplayPortsFiberSfpData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port SFP data text (Fiber ports only)"
::={ besDisplayPortsEntry 13 }
--*****************************************************************************************
END