mibs/MIBS/brocade/FOUNDRY-CAR-MIB

377 lines
9.4 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
FOUNDRY-CAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,Gauge32, Counter64,Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
snSwitch
FROM FOUNDRY-SN-SWITCH-GROUP-MIB
InterfaceIndex, ifIndex
FROM IF-MIB;
snCAR MODULE-IDENTITY
LAST-UPDATED "201006020000Z" -- 04 June 2010
ORGANIZATION "Brocade Communications Systems, Inc."
CONTACT-INFO
"Technical Support Center
130 Holger Way,
San Jose, CA 95134
Email: ipsupport@brocade.com
Phone: 1-800-752-8061
URL: www.brocade.com"
DESCRIPTION
"Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment."
REVISION "201006020000Z" -- 04 June 2010
DESCRIPTION
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
REVISION "200909300000Z" -- September 30, 2009
DESCRIPTION
"convert from SMIv1 to SMIv2"
::= { snSwitch 16}
snPortCARs OBJECT IDENTIFIER ::= { snCAR 1 }
-- Textual Conventions
PacketSource::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
"
SYNTAX INTEGER {
input(0), --for inbound traffic
output(1) --for outbound traffic
}
RateLimitType::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
"
SYNTAX INTEGER{
all(3), -- all traffic.
quickAcc(2), -- traffic matches rate-limit's access list.
standardAcc(1) -- traffic matches standard access list.
}
RateLimitAction::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
"
SYNTAX INTEGER {
continue(1),
drop(2),
precedCont(3),
precedXmit(4),
xmit(5)
}
snPortCARTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPortCAREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of rate limit configuration entries.
Rate Limit is a method of traffic control. It allows a set
of rate limits to be configured and applied to packets flowing
into/out of an interface to regulate network traffic."
::= { snPortCARs 1 }
snPortCAREntry OBJECT-TYPE
SYNTAX SnPortCAREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of rate-limit configuration objects on this
interface."
INDEX { snPortCARifIndex, snPortCARDirection, snPortCARRowIndex }
::= { snPortCARTable 1 }
SnPortCAREntry ::=
SEQUENCE {
snPortCARifIndex
InterfaceIndex,
snPortCARDirection
PacketSource,
snPortCARRowIndex
INTEGER,
snPortCARType
RateLimitType,
snPortCARAccIdx
Integer32,
snPortCARRate
Integer32,
snPortCARLimit
Integer32,
snPortCARExtLimit
Integer32,
snPortCARConformAction
RateLimitAction,
snPortCARExceedAction
RateLimitAction,
snPortCARStatSwitchedPkts
Counter64,
snPortCARStatSwitchedBytes
Counter64,
snPortCARStatFilteredPkts
Counter64,
snPortCARStatFilteredBytes
Counter64,
snPortCARStatCurBurst
Gauge32
}
snPortCARifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value for this rate limit entry."
::= { snPortCAREntry 1 }
snPortCARDirection OBJECT-TYPE
SYNTAX PacketSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The input or output transmission direction for the
Rate Limit object.
input (0), --for inbound traffic
output(1) --for outbound traffic "
::= { snPortCAREntry 2 }
snPortCARRowIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index for rate limit objects.
It increases as the rate limit entries are added.
Skips the number when a row is deleted."
::= { snPortCAREntry 3 }
snPortCARType OBJECT-TYPE
SYNTAX RateLimitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of traffic rate-limited against."
::= { snPortCAREntry 4 }
snPortCARAccIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the access list if RateLimitType is either
quickAcc or standardAcc."
::= { snPortCAREntry 5 }
snPortCARRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The comitted access rate. This determines the long term
average transmission rate. Traffic that falls under this
rate always conforms. This is average rate in bits per
second."
::= { snPortCAREntry 6 }
snPortCARLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the normal burst size that determines how large traffic
bursts can be before some traffic exceeds the rate limit. This
specifies the number of bytes that are guaranteed to be transported
by the network at the average rate under normal conditions during
committed time interval. This normal burst size is in bytes."
::= { snPortCAREntry 7 }
snPortCARExtLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the extended burst limit that determines how large traffic
bursts can be before all the traffic exceeds the rate limit. This
burst size is in bytes."
::= { snPortCAREntry 8 }
snPortCARConformAction OBJECT-TYPE
SYNTAX RateLimitAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic is within
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snPortCAREntry 9 }
snPortCARExceedAction OBJECT-TYPE
SYNTAX RateLimitAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds
the Rate Limit.drop
drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snPortCAREntry 10 }
snPortCARStatSwitchedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { snPortCAREntry 11 }
snPortCARStatSwitchedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of bytes permitted by this interface."
::= { snPortCAREntry 12 }
snPortCARStatFilteredPkts OBJECT-TYPE
SYNTAX Counter64
--UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { snPortCAREntry 13 }
snPortCARStatFilteredBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { snPortCAREntry 14 }
snPortCARStatCurBurst OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current received burst size."
::= { snPortCAREntry 15 }
-- end of snPortCARTable
-- RL Counter Table
agRateLimitCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgRateLimitCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of rate limit counter entries."
::= { snPortCARs 2 }
agRateLimitCounterEntry OBJECT-TYPE
SYNTAX AgRateLimitCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of rate-limit counter objects on a
interface, direction and configuration row index within that interface."
INDEX { ifIndex, snPortCARRowIndex }
::= { agRateLimitCounterTable 1 }
AgRateLimitCounterEntry ::=
SEQUENCE {
agRateLimitCounterFwdedOctets
Counter64,
agRateLimitCounterDroppedOctets
Counter64,
agRateLimitCounterReMarkedOctets
Counter64,
agRateLimitCounterTotalOctets
Counter64
}
agRateLimitCounterFwdedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarded octet count for this rate limit entry."
::= { agRateLimitCounterEntry 1 }
agRateLimitCounterDroppedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dropped octet count for this rate limit entry."
::= { agRateLimitCounterEntry 2 }
agRateLimitCounterReMarkedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remarked octet count for this rate limit entry."
::= { agRateLimitCounterEntry 3 }
agRateLimitCounterTotalOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total octet count for this rate limit entry."
::= { agRateLimitCounterEntry 4 }
END
-- *****************************************************************
-- Foundry Commited Access Rate MIB file.
-- *****************************************************************