mibs/MIBS/brocade/SW-MIB

3562 lines
109 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
--
-- Title: Fibre Channel Switch MIB.
--
-- This is specified based on SMIv2, mainly to ensure that the specification
-- can be parsed easily by off-the-shelf network management product in
-- the market.
--
-- The goal of this mib is to access the any Fibre Channel switch of
-- Brocade's family by using single SW-MIB file.
-- This mib file includes the traps for Silkworm Switch.
-- NOTE: Load BRCD.mib file before loading this mib file.
--
SW-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString, TEXTUAL-CONVENTION
FROM SNMPv2-TC
Counter32, Integer32, IpAddress,
OBJECT-TYPE, OBJECT-IDENTITY,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
FcWwn, SwDomainIndex, SwNbIndex, SwSensorIndex,
SwPortIndex, SwTrunkMaster
FROM Brocade-TC
fcSwitch, bcsiModules
FROM Brocade-REG-MIB
connUnitPortStatEntry
FROM FCMGMT-MIB;
swMibModule MODULE-IDENTITY
LAST-UPDATED "200408061830Z" -- Aug 06, 2004 6:30pm
ORGANIZATION "Brocade Communications Systems, Inc.,"
CONTACT-INFO "Customer Support Group
Brocade Communications Systems,
1745 Technology Drive,
San Jose, CA 95110 U.S.A
Tel: +1-408-392-6061
Fax: +1-408-392-6656
Email: support@Brocade.COM
WEB: www.brocade.com"
DESCRIPTION "The MIB module is for Brocade's Fibre Channel Switch.
Copyright (c) 1996-2003 Brocade Communications Systems, Inc.
All rights reserved."
REVISION "200301131430Z" -- Jan 13, 2003 2:30pm
DESCRIPTION "The initial version of this module."
REVISION "200307201430Z" -- July 20, 2003 2:30pm
DESCRIPTION "Added swIDIDMode to the swFabric group."
REVISION "200404151030Z" -- April 15, 2004 10:30am
DESCRIPTION "Added object for Trap Severity Level, swFwLastSeverityLevel.
Added the enumeration swFwResourceFlash for SwFwClassesAreas.
Deprecated the mib object swEventTrapLevel.
Updated the description of swGroupId and corrected the spell
mistakes.
Obsoleted the swFault Trap.
Added enumerations four-GB for swFCPortSpeed and unknown,
other for swFCPortType."
REVISION "200408061830Z" -- Aug 06, 2004 6:30pm
DESCRIPTION "Added swFCPortSpecifier object to swFCPortTable."
REVISION "200504292016Z" -- Apr 29, 2005 8:16pm
DESCRIPTION "Modified the #SUMMARY and #ARGUMENTS for swFabricWatchTrap"
REVISION "200601090900Z" -- Jan 09, 2006 9:00am
DESCRIPTION "1. Modified the description for swPortTrunked
2. Updated the SW Traps summary and description to
remove the obsolete varbindings"
REVISION "200605170900Z" -- May 17, 2006 9:00am
DESCRIPTION "Added swFCPortFlag object to swFCPortTable"
REVISION "200701230900Z" -- Jan 23, 2007 9:00am
DESCRIPTION "Added enumerations eight-GB and ten-GB for swFCPortSpeed"
REVISION "200706081200Z" -- Jun 8, 2007 12:00pm
DESCRIPTION "Included swFCPortFlag as an additiional variable binding for
trap SWFCPortScn"
REVISION "200706271030Z" -- Jun 27, 2007 10:30am
DESCRIPTION "Added enumerations octuple and decuple for swNbBaudRate"
REVISION "200708011220Z" -- Aug 01, 2007 12:20pm
DESCRIPTION "Added the enumerations swFwEPortUtil and swFwEPortPktl for swFwClassAreaIndex"
REVISION "200708290442Z" -- Aug 29, 2007 4:42pm
DESCRIPTION "Added swFCPortBrcdType object to swFCPortTable"
REVISION "200801290759Z" -- Jan 29, 2008 7:59pm
DESCRIPTION "Added Toptalker support and swVfId to the swFabric group."
REVISION "200807170345Z" -- July 17, 2008 3:45pm
DESCRIPTION "Added swIPv6ChangeTrap, swIPv6Address and swIPv6Status ."
REVISION "200807240232Z" -- July 24, 2008 2:32pm
DESCRIPTION "Added swModel to distiguish between 7500 and 7500E switch ."
REVISION "200807250232Z" -- July 25, 2008 2:32pm
DESCRIPTION "Added the enumerations swFwPortLr, swFwEPortLr, swFwEPortUtil, swFwEPortPktl,
swFwFCUPortLr, swFwFOPPortLr for swFwClassAreaIndex."
REVISION "200809090900Z" -- Sept 09, 2008 9:00pm
DESCRIPTION "Added swPmgrEventTrap information."
REVISION "200909280900Z" -- Jan 28, 2009 9:00pm
DESCRIPTION "Added additional fabric watch threshold in SwFwActs."
REVISION "200902210900Z" -- Feb 21, 2008 9:00pm
DESCRIPTION "Added port phy states."
REVISION "200903300900Z" -- Mar 30, 2009 9:00am
DESCRIPTION "Added swEventVfId in swEventTable."
REVISION "200906251200Z" -- Jun 25, 2009 12:00pm
DESCRIPTION "Removed the version information from Brocade's proprietary MIB file name."
REVISION "200906290100Z" -- Jun 29, 2009 01:00pm
DESCRIPTION "Modified swVfid position at the last of swFabric table"
REVISION "200906301306Z" -- June 30, 2009 1:06pm
DESCRIPTION "Added swFwCPUMemUsage enumeration under swFwClassAreaIndex."
REVISION "200906300600Z" -- Jun 30, 2009 06:00pm
DESCRIPTION "Updated the description of swCpuAction/swMemAction and access of
swcpuormemoryusage objects and changed the type of swEndDeviceInvalidWord,
swEndDeviceLinkFailure,swEndDeviceSyncLoss, swEndDeviceSigLoss,
swEndDeviceProtoErr,swEndDeviceInvalidCRC from integer32 to counter32."
REVISION "200910300500Z" -- Oct 30, 2009 05:00pm
DESCRIPTION "Added swFabricReconfigTrap and swFabricSegmentTrap."
REVISION "200911031306Z" -- Nov 03, 2009 1:06pm
DESCRIPTION "Removed enum switchReboot from swAdmStatus."
REVISION "200911051200Z" -- Nov 05, 2009 12:00pm
DESCRIPTION "Changed swFwCustUnit access to read-only"
REVISION "200911050500Z" -- Nov 05, 2009 05:00pm
DESCRIPTION "Added enums swFwEPortTrunkUtil,swFwFCUPortTrunkUtil and
swFwFOPPortTrunkUtil in SwFwClassesAreas"
REVISION "200911061130Z" -- Nov 06, 2009 11:30am
DESCRIPTION "Added swConnUnitExtensionTable and entries for 64 bit
portstats."
REVISION "0911301030Z" -- Nov 30, 2009 10:30am
DESCRIPTION "Added swMemUsageLimit1 and swMemUsageLimit3 under
swCpuOrMemoryUsage"
REVISION "0912031730Z" -- Dec 03, 2009 05:30pm
DESCRIPTION "Added swExttrap as internal trap."
REVISION "1001301730Z" -- Jan 30, 2010 05:30pm
DESCRIPTION "Changed the descriptions for swConnUnitExtensionTable as per latest FS."
::= { bcsiModules 3 }
sw OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for Brocade's Silkworm Series of
Fibre Channel Switches."
::= { fcSwitch 1 }
sw28k OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID for Brocade's Silkworm 2800 model Fibre Channel
Switch."
::= { fcSwitch 2 }
sw21kN24k OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID for Brocade's Silkworm 2100 and 2400 series
model Fibre Channel Switch."
::= { fcSwitch 3 }
sw20x0 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID for Brocade's Silkworm 20x0 series
model Fibre Channel Switch."
::= { fcSwitch 4 }
SwSevType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The event trap level in conjunction with the an event's
severity level."
SYNTAX INTEGER {
none (0),
critical (1),
error (2),
warning (3),
informational (4),
debug (5)
}
FcPortFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Represents the port status for a FC Flag. Currently this will indicate
if the port is virtual or physical."
SYNTAX BITS {
physical (0),
virtual (1)
}
-- various groups
swSystem OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swSystem group."
::= { sw 1 }
swFabric OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swFabric group."
::= { sw 2 }
swModule OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swModule group."
::= { sw 3 }
swAgtCfg OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swAgtCfg group."
::= { sw 4 }
-- { sw 5 } is reserved
swFCport OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swFCport group."
::= { sw 6 }
swNs OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swNs group."
::= { sw 7 }
swEvent OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swEvent group."
::= { sw 8 }
swFwSystem OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swFwSystem group."
::= { sw 10 }
swEndDevice OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swEndDevice group."
::= { sw 21 }
swGroup OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swGroup group."
::= { sw 22 }
swBlmPerfMnt OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swBlmPerfMnt (Bloom Performance
Monitor) group."
::= { sw 23 }
swTrunk OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for swTrunk group."
::= { sw 24 }
swTopTalker OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for TopTalker group."
::= { sw 25 }
swCpuOrMemoryUsage OBJECT-IDENTITY
STATUS current
DESCRIPTION "The OID sub-tree for cpu or memory usage group."
::= { sw 26 }
swConnUnitPortStatExtentionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwConnUnitPortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This represents the Conn unit Port Stats"
::= { sw 27 }
--
-- the System Group (sw)
--
swCurrentDate OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current date information in displayable textual
format."
::= { swSystem 1 }
swBootDate OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time when the system last booted, in
displayable textual format."
::= { swSystem 2 }
swFWLastUpdated OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The information indicates the date when the firmware
was last updated, in displayable textual format."
::= { swSystem 3 }
swFlashLastUpdated OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The information indicates the date when the FLASH
was last updated, in displayable textual format."
::= { swSystem 4 }
swBootPromLastUpdated OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The information indicates the date when the boot PROM
was last updated, in displayable textual format."
::= { swSystem 5 }
swFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current version of the firwmare."
::= { swSystem 6 }
swOperStatus OBJECT-TYPE
SYNTAX INTEGER {
online (1),
offline (2),
testing (3),
faulty (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current operational status of the switch.
The states are as follow:
o online(1) means the switch is accessible by an external
Fibre Channel port;
o offline(2) means the switch is not accessible;
o testing(3) means the switch is in a built-in test mode
and is not accessible by an external Fibre Channel port;
o faulty(4) means the switch is not operational."
::= { swSystem 7 }
swAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
online (1),
offline (2),
testing (3),
faulty (4),
reboot (5),
fastboot (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired administrative status of the switch.
A management station may place the switch in a desired
state by setting this object accordingly. The states
are as follow:
o online(1) means set the switch to be accessible by an
external Fibre Channel port;
o offline(2) means set the switch to be inaccessible;
o testing(3) means set the switch to run the built-in test;
o faulty(4) means set the switch to a 'soft' faulty
condition;
o reboot(5) means set the switch to reboot in 1 second.
o fastboot(6) means set the switch to fastboot in 1 second.
Fastboot would cause the switch to boot but skip over the
POST.
When the switch is in faulty state, only two states
can be set: faulty and reboot/fastboot."
::= { swSystem 8 }
swTelnetShellAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
terminated (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired administrative status of the Telnet
shell. By setting it to terminated(1), the current
Telnet shell task is deleted. When this variable instance
is read, it reports the value last set through SNMP."
::= { swSystem 9 }
swSsn OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The soft serial number of the switch."
::= { swSystem 10 }
-- FLASH administration
-- the next 5 objects are related to firmware or config file management.
--
-- The underlying method in the transfer of the firmware or config file
-- is based on either FTP or remote shell.
-- If a password is provided, then FTP is used.
-- If NO password is provided, then remote shell is used.
--
-- 2 steps to manage firmware or switch config file in the switch FLASH,
-- (A1) set swFlashDLHost.0, swFlashDLUser.0 and swFlashDLFile.0 to
-- appropriate
-- host IP address in user dot notation (e.g. 192.168.1.7),
-- user name (e.g. "administrator"), and
-- file name of the firmware or config file (e.g. "/home/fcswh/v2.2")
-- respectively;
-- (A2) set swFlashDLPassword.0 to an appropriate value (e.g. "secret")
-- if FTP is the desired method of transfer;
-- (B) set swFlashDLAdmStatus.0 to swFwUpgrade(2), swCfUpload(3),
-- or swCfDownload(4) accordingly.
--
swFlashDLOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
swCurrent (1),
swFwUpgraded (2),
swCfUploaded (3),
swCfDownloaded (4),
swFwCorrupted (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational status of the FLASH.
The operational states are as follow:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgraded(2) state indicates that it contains the image
upgraded from the swFlashDLHost.0.;
o swCfUploaded(3) state indicates that the switch configuration
file has been uploaded to the host; and
o swCfDownloaded(4) state indicates that the switch
configuration file has been downloaded from the host.
o swFwCorrupted (5) state indicates that the firmware in the
FLASH of the switch is corrupted."
::= { swSystem 11 }
swFlashDLAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
swCurrent (1),
swFwUpgrade (2),
swCfUpload (3),
swCfDownload (4),
swFwCorrupted (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired state of the FLASH.
A management station may place the FLASH in a desired
state by setting this object accordingly:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgrade(2) means that the firmware in the FLASH is to be
upgraded from the host specified;
o swCfUpload(3) means that the switch config file is to be
uploaded to the host specified; or
o swCfDownload(4) means that the switch config file is to be
downloaded from the host specified.
o swFwCorrupted(5) state indicates that the firmware in the
FLASH is corrupted. This value is for informational purpose
only. However, set of swFlashDLAdmStatus to this value is
not allowed.
The host is specified in swFlashDLHost.0. In addition,
user name is specified in swFlashDLUser.0, and
the file name specified in swFlashDLFile.0.
Reference the user manual on the following commands,
o firmwareDownload,
o configUpload, and
o configDownload."
::= { swSystem 12 }
swFlashDLHost OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name or IP address (in dot notation) of the host
to download or upload a relevant file to the FLASH."
::= { swSystem 13 }
swFlashDLUser OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user name on the host to download or upload
a relevant file to or from the FLASH."
::= { swSystem 14 }
swFlashDLFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the file to be downloaded or uploaded."
::= { swSystem 15 }
swFlashDLPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The password to be used in for FTP transfer of
files in the download or upload operation."
::= { swSystem 16 }
-- 17..19 are reserved
swBeaconOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current operational status of the switch beacon.
When the beacon is on, the LEDs on the front panel
of the switch run alternately from left to right
and right to left. The color is yellow.
When the beacon is off, each LED will be in their
its regular status indicating color and state."
::= { swSystem 18 }
swBeaconAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired status of the switch beacon.
When the beacon is set to on, the LEDs on the front
panel of the switch run alternately from left to right
and right to left. The color is yellow.
When the beacon is set to off, each LED will be in
its regular status indicating color and state."
::= { swSystem 19 }
swDiagResult OBJECT-TYPE
SYNTAX INTEGER {
sw-ok (1),
sw-faulty (2),
sw-embedded-port-fault (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the power-on startup (POST)
diagnostics."
::= { swSystem 20 }
-- operating environment sensors (temperature, fan, power supply...)
swNumSensors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of sensors inside the switch."
::= { swSystem 21 }
swSensorTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwSensorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of sensor entries."
::= { swSystem 22 }
swSensorEntry OBJECT-TYPE
SYNTAX SwSensorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of the sensor information."
INDEX { swSensorIndex }
::= { swSensorTable 1 }
SwSensorEntry ::= SEQUENCE {
swSensorIndex SwSensorIndex,
swSensorType INTEGER,
swSensorStatus INTEGER,
swSensorValue Integer32,
swSensorInfo DisplayString
}
swSensorIndex OBJECT-TYPE
SYNTAX SwSensorIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the sensor."
::= { swSensorEntry 1 }
swSensorType OBJECT-TYPE
SYNTAX INTEGER {
temperature (1),
fan (2),
power-supply (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the sensor type."
::= { swSensorEntry 2 }
swSensorStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
faulty (2),
below-min (3),
nominal (4),
above-max (5),
absent (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status of the sensor."
::= { swSensorEntry 3 }
swSensorValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current value (reading) of the sensor.
The value, -2147483648, represents an unknown quantity.
It also means that the sensor does not have the capability to
measure the actual value. In V2.0, the temperature sensor
value will be in Celsius; the fan value will be in RPM
(revolution per minute); and the power supply sensor reading
will be unknown."
::= { swSensorEntry 4 }
swSensorInfo OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Additional displayable information on the sensor.
In V2.x, it contains the sensor type and number
in textual format. For example, 'Temp 3', 'Fan 6'."
::= { swSensorEntry 5 }
-- track changes string scalar
swTrackChangesInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Track changes string. For trap only"
::= { swSystem 23 }
swID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the logical switch (0/1)"
::= { swSystem 24 }
swEtherIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Ethernet interface of this logical
switch."
::= { swSystem 25 }
swEtherIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Mask of the Ethernet interface of this logical switch."
::= { swSystem 26}
swFCIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the FC interface of this logical switch."
::= { swSystem 27 }
swFCIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Mask of the FC interface of this logical switch."
::= { swSystem 28 }
swIPv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPV6 address."
::= { swSystem 29 }
swIPv6Status OBJECT-TYPE
SYNTAX INTEGER {
tentative (1),
preferred (2),
ipdeprecated (3),
inactive (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The current status of ipv6 address."
::= { swSystem 30 }
swModel OBJECT-TYPE
SYNTAX INTEGER {
switch7500 (1),
switch7500E (2),
other (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether the switch is 7500 or 7500E ."
::= { swSystem 31 }
swTestString OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "presence of this string represents test trap."
::= { swSystem 32 }
--
-- End of System Group
--
--
-- Fabric Group
--
swDomainID OBJECT-TYPE
SYNTAX SwDomainIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current Fibre Channel domain ID of the switch.
To set a new value, the switch (swAdmStatus) must be in
offline or testing state."
::= { swFabric 1 }
swPrincipalSwitch OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether the switch is
the Principal switch as per FC-SW."
::= { swFabric 2 }
-- swFabric 3..7 are reserved
-- (immediate) Neighborhood ISL family
--
swNumNbs OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Inter-Switch Links in the (immediate)
neighborhood."
::= { swFabric 8 }
swNbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwNbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains the ISLs in the immediate
neighborhood of the switch."
::= { swFabric 9 }
swNbEntry OBJECT-TYPE
SYNTAX SwNbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing each neighbor ISL parameters."
INDEX { swNbIndex }
::= { swNbTable 1 }
SwNbEntry ::= SEQUENCE {
swNbIndex SwNbIndex,
swNbMyPort SwPortIndex,
swNbRemDomain SwDomainIndex,
swNbRemPort SwPortIndex,
swNbBaudRate INTEGER,
swNbIslState INTEGER,
swNbIslCost Integer32,
swNbRemPortName OCTET STRING
}
swNbIndex OBJECT-TYPE
SYNTAX SwNbIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the neighbor ISL entry."
::= { swNbEntry 1 }
swNbMyPort OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the port that has an ISL to another switch."
::= { swNbEntry 2 }
swNbRemDomain OBJECT-TYPE
SYNTAX SwDomainIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the Fibre Channel domain on the other end
of the ISL."
::= { swNbEntry 3 }
swNbRemPort OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the port index on the other end of the ISL."
::= { swNbEntry 4 }
swNbBaudRate OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- none of below
oneEighth (2), -- 155 Mbaud
quarter (4), -- 266 Mbaud
half (8), -- 532 Mbaud
full (16), -- 1 Gbaud
double (32), -- 2 Gbaud
quadruple (64), -- 4 Gbaud
octuple (128), -- 8 Gbaud
decuple (256) -- 10 Gbaud
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate of the ISL."
::= { swNbEntry 5 }
swNbIslState OBJECT-TYPE
SYNTAX INTEGER {
sw-down (0),
sw-init (1),
sw-internal2 (2),
sw-internal3 (3),
sw-internal4 (4),
sw-active (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current state of the ISL.
The swNbIslState will be 0 when ISL
is in incompatible state or port is a slave port."
::= { swNbEntry 6 }
swNbIslCost OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current link cost of the ISL."
::= { swNbEntry 7 }
swNbRemPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The World_wide_Name of the remote port."
::= { swNbEntry 8 }
-- Fabric member information
--
swFabricMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwFabricMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains information on the member
switches of a fabric. This may not be available on
all versions of Fabric OS."
::= { swFabric 10 }
swFabricMemEntry OBJECT-TYPE
SYNTAX SwFabricMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing each switch in the fabric."
INDEX { swFabricMemWwn }
::= { swFabricMemTable 1 }
SwFabricMemEntry ::= SEQUENCE {
swFabricMemWwn FcWwn,
swFabricMemDid SwDomainIndex,
swFabricMemName DisplayString,
swFabricMemEIP IpAddress,
swFabricMemFCIP IpAddress,
swFabricMemGWIP IpAddress,
swFabricMemType Integer32,
swFabricMemShortVersion OCTET STRING
}
swFabricMemWwn OBJECT-TYPE
SYNTAX FcWwn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the World wide name of the
member switch."
::= { swFabricMemEntry 1 }
swFabricMemDid OBJECT-TYPE
SYNTAX SwDomainIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the domain id of the member
switch."
::= { swFabricMemEntry 2 }
swFabricMemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the name of the member switch."
::= { swFabricMemEntry 3 }
swFabricMemEIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the ethernet IP address
of the member switch."
::= { swFabricMemEntry 4 }
swFabricMemFCIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the Fibre Channel IP address
of the member switch."
::= { swFabricMemEntry 5 }
swFabricMemGWIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the Gateway IP address
of the member switch."
::= { swFabricMemEntry 6 }
swFabricMemType OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the member switch type."
::= { swFabricMemEntry 7 }
swFabricMemShortVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies Fabric OS version of
the member switch."
::= { swFabricMemEntry 8 }
swIDIDMode OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of Insistent Domain ID (IDID) mode. Status
indicating IDID mode is enabled or not."
::= { swFabric 11 }
swPmgrEventType OBJECT-TYPE
SYNTAX INTEGER {
create (0),
delete (1),
moveport (2),
fidchange (3),
basechange (4),
vfstatechange(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates Partition manager event type."
::= { swFabric 12 }
swPmgrEventTime OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the date and time when this pmgr
event occurred, in textual format."
::= { swFabric 13 }
swPmgrEventDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the textual description of
the pmgr event."
::= { swFabric 14 }
swVfId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Virtual fabric id."
::= { swFabric 15 }
--
-- SNMP Agent Configuration
--
-- swAgtCfg 1..10 are reserved
swAgtCmtyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAgtCmtyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains, one entry for each Community,
the access control and parameters of the Community."
::= { swAgtCfg 11 }
swAgtCmtyEntry OBJECT-TYPE
SYNTAX SwAgtCmtyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing the Community parameters."
INDEX { swAgtCmtyIdx }
::= { swAgtCmtyTable 1 }
SwAgtCmtyEntry ::= SEQUENCE {
swAgtCmtyIdx Integer32,
swAgtCmtyStr DisplayString,
swAgtTrapRcp IpAddress,
swAgtTrapSeverityLevel SwSevType
}
swAgtCmtyIdx OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the SNMPv1 Community entry."
::= { swAgtCmtyEntry 1 }
swAgtCmtyStr OBJECT-TYPE
SYNTAX DisplayString(SIZE (2..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a Community string supported by the agent.
If a new value is set successfully, it takes effect
immediately."
::= { swAgtCmtyEntry 2 }
swAgtTrapRcp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the trap recipient associated with the
Community. If a new value is set successfully, it takes
effect immediately."
::= { swAgtCmtyEntry 3 }
swAgtTrapSeverityLevel OBJECT-TYPE
SYNTAX SwSevType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the trap severity level associated with the
swAgtTrapRcp. The trap severity level in conjunction with
the an event's severity level. When an event occurs and if its
severity level is at or below the set value, the SNMP trap is
sent to configured trap recipients. The severity level is
limited to particular events. If a new value is set successfully,
it takes effect immediately."
::= { swAgtCmtyEntry 4 }
--
-- End of SNMP Agent Configuration Group
--
--
-- Fibre Channel Port Group
-- This group contains information about the physical state,
-- operational status, performance and error statistics of each
-- Fibre Channel port on the switch. A Fibre Channel port is one which
-- supports the Fibre Channel protocol. E.g. F_Port, E_Port, FL_Port.
--
swFCPortCapacity OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of Fibre Channel ports on this
switch. It includes G_Port, F_Port, FL_Port and any other
types of Fibre Channel port."
::= { swFCport 1 }
swFCPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwFCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains, one entry for each switch port,
configuration and service parameters of the port."
::= { swFCport 2 }
swFCPortEntry OBJECT-TYPE
SYNTAX SwFCPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing the configuration and service
parameters of the switch port."
INDEX { swFCPortIndex }
::= { swFCPortTable 1 }
SwFCPortEntry ::= SEQUENCE {
swFCPortIndex SwPortIndex,
swFCPortType INTEGER,
swFCPortPhyState INTEGER,
swFCPortOpStatus INTEGER,
swFCPortAdmStatus INTEGER,
swFCPortLinkState INTEGER,
swFCPortTxType INTEGER,
-- the rest is mapped to gstat_t
swFCPortTxWords Counter32,
swFCPortRxWords Counter32,
swFCPortTxFrames Counter32,
swFCPortRxFrames Counter32,
swFCPortRxC2Frames Counter32,
swFCPortRxC3Frames Counter32,
swFCPortRxLCs Counter32,
swFCPortRxMcasts Counter32,
swFCPortTooManyRdys Counter32,
swFCPortNoTxCredits Counter32,
swFCPortRxEncInFrs Counter32,
swFCPortRxCrcs Counter32,
swFCPortRxTruncs Counter32,
swFCPortRxTooLongs Counter32,
swFCPortRxBadEofs Counter32,
swFCPortRxEncOutFrs Counter32,
swFCPortRxBadOs Counter32,
swFCPortC3Discards Counter32,
swFCPortMcastTimedOuts Counter32,
swFCPortTxMcasts Counter32,
-- LIP statistics
swFCPortLipIns Counter32,
swFCPortLipOuts Counter32,
swFCPortLipLastAlpa OCTET STRING,
-- new for V2.1
swFCPortWwn OCTET STRING,
-- new for V3.0
swFCPortSpeed INTEGER,
-- new for Port Name Feature.
swFCPortName DisplayString,
-- new for PortSpecifier Feature.
swFCPortSpecifier DisplayString,
-- new for portFlag Feature.
swFCPortFlag FcPortFlag,
-- Brocade port type.
swFCPortBrcdType INTEGER
}
swFCPortIndex OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the switch port index.
Note that the value of a port index is 1 higher than the
port number labeled on the front panel.
E.g. port index 1 correspond to port number 0."
::= { swFCPortEntry 1 }
swFCPortType OBJECT-TYPE
SYNTAX INTEGER {
stitch (1),
flannel (2),
loom (3),
bloom (4),
rdbloom (5),
wormhole (6),
other (7),
unknown (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the type of switch port.
It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6)."
::= { swFCPortEntry 2 }
swFCPortPhyState OBJECT-TYPE
SYNTAX INTEGER {
noCard (1),
noTransceiver (2),
laserFault (3),
noLight (4),
noSync (5),
inSync (6),
portFault (7),
diagFault (8),
lockRef (9),
validating (10),
invalidModule (11),
unknown (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noTransceiver(2) no Transceiver module in this port.
noGbic(2) was used previously. Transceiver
is the generic name for GBIC, SFP etc.;
laserFault(3) the module is signaling a laser fault
(defective Transceiver);
noLight(4) the module is not receiving light;
noSync(5) the module is receiving light but is
out of sync;
inSync(6) the module is receiving light and is
in sync;
portFault(7) the port is marked faulty (defective
Transceiver, cable or device);
diagFault(8) the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9) the port is locking to the reference
signal.
validating(10) Validation is in progress
invalidModule(11) Invalid SFP
unknown(255) unknown.
"
::= { swFCPortEntry 3 }
swFCPortOpStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
online (1),
offline (2),
testing (3),
faulty (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the operational status of
the port. The online(1) state indicates that user frames
can be passed. The unknown(0) state indicates that likely
the port module is physically absent (see swFCPortPhyState)."
::= { swFCPortEntry 4 }
swFCPortAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
online (1),
offline (2),
testing (3),
faulty (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired state of the port. A management station
may place the port in a desired state by setting this
object accordingly. The testing(3) state indicates that
no user frames can be passed. As the result of
either explicit management action or per configuration
information accessible by the switch, swFCPortAdmStatus is
then changed to either the online(1) or testing(3)
states, or remains in the offline(2) state."
::= { swFCPortEntry 5 }
swFCPortLinkState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
loopback (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is
in a FC-AL loop);
disabled(2) - the port is not allowed to participate in
the FC-PH protocol with its attached port(s);
loopback(3) - the port may transmit frames through an
internal path to verify the health of the transmitter
and receiver path.
Note that when the port's link state changes, its
operational status (swFCPortOpStatus) will be affected."
::= { swFCPortEntry 6 }
swFCPortTxType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
lw (2),
sw (3),
ld (4),
cu (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the media transmitter type of
the port. The value may be:
unknown(1) cannot determined to the port driver
lw(2) long wave laser
sw(3) short wave laser
ld(4) long wave LED
cu(5) copper (electrical)."
::= { swFCPortEntry 7 }
-- counters
swFCPortTxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Fibre Channel
words that the port has transmitted."
::= { swFCPortEntry 11 }
swFCPortRxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Fibre Channel
words that the port has received."
::= { swFCPortEntry 12 }
swFCPortTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of (Fibre Channel)
frames that the port has transmitted."
::= { swFCPortEntry 13 }
swFCPortRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of (Fibre Channel)
frames that the port has received."
::= { swFCPortEntry 14 }
swFCPortRxC2Frames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Class 2
frames that the port has received."
::= { swFCPortEntry 15 }
swFCPortRxC3Frames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Class 3
frames that the port has received."
::= { swFCPortEntry 16 }
swFCPortRxLCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Link Control
frames that the port has received."
::= { swFCPortEntry 17 }
swFCPortRxMcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Multicast
frames that the port has received."
::= { swFCPortEntry 18 }
swFCPortTooManyRdys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of times when RDYs
exceeds the frames received."
::= { swFCPortEntry 19 }
swFCPortNoTxCredits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of times when the
transmit credit has reached zero."
::= { swFCPortEntry 20 }
swFCPortRxEncInFrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of encoding error or
disparity error inside frames received."
::= { swFCPortEntry 21 }
swFCPortRxCrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of CRC errors
detected for frames received."
::= { swFCPortEntry 22 }
swFCPortRxTruncs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of truncated
frames that the port has received."
::= { swFCPortEntry 23 }
swFCPortRxTooLongs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of received frames that
are too long."
::= { swFCPortEntry 24 }
swFCPortRxBadEofs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of received frames that
have bad EOF delimiter."
::= { swFCPortEntry 25 }
swFCPortRxEncOutFrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of encoding error or
disparity error outside frames received."
::= { swFCPortEntry 26 }
swFCPortRxBadOs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of invalid Ordered
Sets received."
::= { swFCPortEntry 27 }
swFCPortC3Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Class 3
frames that the port has discarded."
::= { swFCPortEntry 28 }
swFCPortMcastTimedOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Multicast
frames that has been timed out."
::= { swFCPortEntry 29 }
swFCPortTxMcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Multicast
frames that has been transmitted."
::= { swFCPortEntry 30 }
-- LIP statistics
swFCPortLipIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Loop Initializations
that has been initiated by loop devices attached."
::= { swFCPortEntry 31 }
swFCPortLipOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of Loop Initializations
that has been initiated by the port."
::= { swFCPortEntry 32 }
swFCPortLipLastAlpa OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the Physical Address (AL_PA)
of the loop device that initiated the last
Loop Initialization."
::= { swFCPortEntry 33 }
swFCPortWwn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The World_wide_Name of the Fibre Channel port.
The contents of an instance are in the IEEE extended format
as specified in FC-PH; the 12-bit port identifier represents
the port number within the switch."
::= { swFCPortEntry 34 }
swFCPortSpeed OBJECT-TYPE
SYNTAX INTEGER
{
one-GB (1),
two-GB (2),
auto-Negotiate (3),
four-GB (4),
eight-GB (5),
ten-GB (6),
unknown (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The desired baud rate for the port. It can have the
values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5),
or 10GB (6). Some of the above values may not be supported
by all type of switches."
::= { swFCPortEntry 35 }
swFCPortName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string indicates the name of the addressed port.
The names should be persistent across switch reboots.
Port names do not have to be unique within a switch or
within a fabric."
::= { swFCPortEntry 36 }
swFCPortSpecifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This string indicates the physical port number of the addressed port.
The format of the string is: <slot>/port, where 'slot' being
present only for bladed systems.
"
::= { swFCPortEntry 37 }
-- FC port status flag
swFCPortFlag OBJECT-TYPE
SYNTAX FcPortFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit map of port status flags which includes the information of port type.
Currently this will indicate if the port is virtual or physical."
::= { swFCPortEntry 38 }
swFCPortBrcdType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
other (2),
fl-port (3), -- public loop
f-port (4), -- fabric port
e-port (5), -- fabric expansion port
g-port (6), -- generic fabric port
ex-port (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Brocade port type."
::= { swFCPortEntry 39 }
--
-- End of Fibre Channel Port group
--
--
-- The Name Server Database group
--
swNsLocalNumEntry OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of local Name Server entries."
::= { swNs 1 }
swNsLocalTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwNsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of local Name Server entries."
::= { swNs 2 }
swNsLocalEntry OBJECT-TYPE
SYNTAX SwNsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of the local Name Server database."
INDEX { swNsEntryIndex }
::= { swNsLocalTable 1 }
SwNsEntry ::= SEQUENCE {
swNsEntryIndex Integer32,
swNsPortID OCTET STRING,
swNsPortType INTEGER,
swNsPortName FcWwn,
swNsPortSymb OCTET STRING,
swNsNodeName FcWwn,
swNsNodeSymb OCTET STRING,
swNsIPA OCTET STRING,
swNsIpAddress OCTET STRING,
swNsCos INTEGER,
swNsFc4 OCTET STRING,
swNsIpNxPort OCTET STRING,
swNsWwn OCTET STRING,
swNsHardAddr OCTET STRING
}
swNsEntryIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the Name Server database entry."
::= { swNsLocalEntry 1 }
swNsPortID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the Fibre Channel port address
ID of the entry."
::= { swNsLocalEntry 2 }
swNsPortType OBJECT-TYPE
SYNTAX INTEGER {
-- unknown (0),
nPort (1),
nlPort (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the type of port: N_Port,
NL_Port, etc., for this entry. The type is defined in FC-GS-2."
::= { swNsLocalEntry 3 }
swNsPortName OBJECT-TYPE
SYNTAX FcWwn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the Fibre Channel World_wide
Name of the port entry."
::= { swNsLocalEntry 4 }
swNsPortSymb OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the contents of a Symbolic Name
of the port entry. In FC-GS-2, a Symbolic Name consists of
a byte array of 1 through 255 bytes, and the first byte of the
array specifies the length of its 'contents'.
This object variable corresponds to the 'contents' of the
Symbolic Name, without the first byte."
::= { swNsLocalEntry 5 }
swNsNodeName OBJECT-TYPE
SYNTAX FcWwn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the Fibre Channel World_wide
Name of the associated node as defined in FC-GS-2."
::= { swNsLocalEntry 6 }
swNsNodeSymb OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the contents of a Symbolic Name
of the the node associated with the entry. In FC-GS-2,
a Symbolic Name consists of a byte array of 1 through 255
bytes, and the first byte of the array specifies the length
of its 'contents'.
This object variable corresponds to the 'contents' of the
Symbolic Name, without the first byte (specifying the length)."
::= { swNsLocalEntry 7 }
swNsIPA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the Initial Process Associator
of the node for the entry as defined in FC-GS-2."
::= { swNsLocalEntry 8 }
swNsIpAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the IP address of the node
for the entry as defined in FC-GS-2. The format of the address
is in IPv6."
::= { swNsLocalEntry 9 }
swNsCos OBJECT-TYPE
SYNTAX INTEGER {
-- class-unknown (0),
class-F (1),
class-1 (2),
class-F-1 (3),
class-2 (4),
class-F-2 (5),
class-1-2 (6),
class-F-1-2 (7),
class-3 (8),
class-F-3 (9),
class-1-3 (10),
class-F-1-3 (11),
class-2-3 (12),
class-F-2-3 (13),
class-1-2-3 (14),
class-F-1-2-3 (15)
-- more to enumerate in future.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the class of services supported
by the port. The value is a bit-map defined as follows:
o bit 0 is class F,
o bit 1 is class 1,
o bit 2 is class 2,
o bit 3 is class 3,
o bit 4 is class 4, etc."
::= { swNsLocalEntry 10 }
swNsFc4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the FC-4s supported
by the port as defined in FC-GS-2."
::= { swNsLocalEntry 11 }
swNsIpNxPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies IpAddress of the Nx_port for the entry."
::= { swNsLocalEntry 12 }
swNsWwn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the World Wide Name (WWN) of the Fx_port
for the entry."
::= { swNsLocalEntry 13 }
swNsHardAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the 24-bit hard address of the node
for the entry."
::= { swNsLocalEntry 14 }
--
-- End of Fibre Channel Name Server group
--
-- #######################################################################
--
-- Event Group - to map the errLog
--
-- NOTE
-- Logically, swEventTable is separate from the error log since it is
-- essentially a view of the error log within a particular time window.
-- The value of swEventIndex shall indicate the event number that has
-- occurred since the switch booted. The value will range from 1 through
-- 2147383647 (2^31 - 1).
--
-- #######################################################################
swEventTrapLevel OBJECT-TYPE
SYNTAX INTEGER {
none (0),
critical (1),
error (2),
warning (3),
informational (4),
debug (5)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "swAgtTrapSeverityLevel, in absence of
swEventTrapLevel, specifies the Trap Severity Level of each
defined trap recipient host.
This object specifies the swEventTrap level in
conjunction with an event's severity level. When an event
occurs and if its severity level is at or below the value
specified by this object instance, the agent will send
the associated swEventTrap to configured recipients."
::= { swEvent 1 }
-- { swEvent 2..3 are reserved }
swEventNumEntries OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the Event Table."
::= { swEvent 4 }
swEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of event entries."
::= { swEvent 5 }
swEventEntry OBJECT-TYPE
SYNTAX SwEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of the event table."
INDEX { swEventIndex }
::= { swEventTable 1 }
SwEventEntry ::= SEQUENCE {
swEventIndex Integer32,
swEventTimeInfo DisplayString,
swEventLevel INTEGER,
swEventRepeatCount Integer32,
swEventDescr DisplayString,
swEventVfId Integer32
}
swEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the event entry."
::= { swEventEntry 1 }
swEventTimeInfo OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the date and time when this
event occurred, in textual format."
::= { swEventEntry 2 }
swEventLevel OBJECT-TYPE
SYNTAX INTEGER {
critical (1),
error (2),
warning (3),
informational (4),
debug (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the severity level of this
event entry."
::= { swEventEntry 3 }
swEventRepeatCount OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies how many times this particular
event has occurred."
::= { swEventEntry 4 }
swEventDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the textual description of
the event."
::= { swEventEntry 5 }
swEventVfId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the Virtual fabric id."
::= { swEventEntry 6 }
--
-- End of Fibre Channel Event Group
--
--
-- swFwSystem
-- Fabric Watch subsystem
-- ###########################################################################
-- Fabric Watch subsystem consists of two tables
-- SwFwClassAreaEntry contains control information for a particular class/area's
-- thresholds. These thresholds are contained in SwFwThresholdEntry.
-- ###########################################################################
-- valid action matrix
-- ###########################################################################
-- The valid action matrix is arrived out of the combination of the configured
-- alarm matrix such as Errlog-1(El), SnmpTrap-2(St), PortLogLock-4(Pl),
-- RapiTrap-8(Rn), EmailAlert-16, PortFencing-32(Pf)
-- ###########################################################################
SwFwActs ::= INTEGER {
swFwNoAction(0),
swFwErrlog(1),
swFwSnmptrap(2),
swFwErrlogSnmptrap(3),
swFwPortloglock(4),
swFwErrlogPortloglock(5),
swFwSnmptrapPortloglock(6),
swFwErrlogSnmptrapPortloglock(7),
swFwRn(8),
swFwElRn(9),
swFwStRn(10),
swFwElStRn(11),
swFwPlRn(12),
swFwElPlRn(13),
swFwStPlRn(14),
swFwElStPlRn(15),
swFwMailAlert(16),
swFwMailAlertErrlog(17),
swFwMailAlertSnmptrap(18),
swFwMailAlertErrlogSnmptrap(19),
swFwMailAlertPortloglock(20),
swFwMailAlertErrlogPortloglock(21),
swFwMailAlertSnmptrapPortloglock(22),
swFwMailAlertErrlogSnmptrapPortloglock(23),
swFwMailAlertRn(24),
swFwElMailAlertRn(25),
swFwMailAlertStRn(26),
swFwMailAlertElStRn(27),
swFwMailAlertPlRn(28),
swFwMailAlertElPlRn(29),
swFwMailAlertStPlRn(30),
swFwMailAlertElStPlRn(31),
swFwPf(32),
swFwElPf(33),
swFwStPf(34),
swFwElStPf(35),
swFwPlPf(36),
swFwElPlPf(37),
swFwStPlPf(38),
swFwElStPlPf(39),
swFwRnPf(40),
swFwElRnPf(41),
swFwStRnPf(42),
swFwElStRnPf(43),
swFwPlRnPf(44),
swFwElPlRnPf(45),
swFwStPlRnPf(46),
swFwElStPlRnPf(47),
swFwMailAlertPf(48),
swFwMailAlertElPf(49),
swFwMailAlertStPf(50),
swFwMailAlertElStPf(51),
swFwMailAlertPlPf(52),
swFwMailAlertElPlPf(53),
swFwMailAlertStPlPf(54),
swFwMailAlertElStPlPf(55),
swFwMailAlertRnPf(56),
swFwMailAlertElRnPf(57),
swFwMailAlertStRnPf(58),
swFwMailAlertElStRnPf(59),
swFwMailAlertPlRnPf(60),
swFwMailAlertElPlRnPf(61),
swFwMailAlertStPlRnPf(62),
swFwMailAlertElStPlRnPf(63)
}
-- variable for threshold values or action matrix level
SwFwLevels ::= INTEGER {
swFwReserved(1),
swFwDefault(2),
swFwCustom(3)
}
-- classes and areas index
SwFwClassesAreas ::= INTEGER {
swFwEnvTemp(1),
swFwEnvFan(2),
swFwEnvPs(3),
swFwTransceiverTemp(4),
swFwTransceiverRxp(5),
swFwTransceiverTxp(6),
swFwTransceiverCurrent(7),
swFwPortLink(8),
swFwPortSync(9),
swFwPortSignal(10),
swFwPortPe(11),
swFwPortWords(12),
swFwPortCrcs(13),
swFwPortRXPerf(14),
swFwPortTXPerf(15),
swFwPortState(16),
swFwFabricEd(17),
swFwFabricFr(18),
swFwFabricDi(19),
swFwFabricSc(20),
swFwFabricZc(21),
swFwFabricFq(22),
swFwFabricFl(23),
swFwFabricGs(24),
swFwEPortLink(25),
swFwEPortSync(26),
swFwEPortSignal(27),
swFwEPortPe(28),
swFwEPortWords(29),
swFwEPortCrcs(30),
swFwEPortRXPerf(31),
swFwEPortTXPerf(32),
swFwEPortState(33),
swFwFCUPortLink(34),
swFwFCUPortSync(35),
swFwFCUPortSignal(36),
swFwFCUPortPe(37),
swFwFCUPortWords(38),
swFwFCUPortCrcs(39),
swFwFCUPortRXPerf(40),
swFwFCUPortTXPerf(41),
swFwFCUPortState(42),
swFwFOPPortLink(43),
swFwFOPPortSync(44),
swFwFOPPortSignal(45),
swFwFOPPortPe(46),
swFwFOPPortWords(47),
swFwFOPPortCrcs(48),
swFwFOPPortRXPerf(49),
swFwFOPPortTXPerf(50),
swFwFOPPortState(51),
swFwPerfALPACRC(52),
swFwPerfEToECRC(53),
swFwPerfEToERxCnt(54),
swFwPerfEToETxCnt(55),
swFwPerffltCusDef(56),
swFwTransceiverVoltage(57),
swFwSecTelnetViolations(58),
swFwSecHTTPViolations(59),
swFwSecAPIViolations(60),
swFwSecRSNMPViolations(61),
swFwSecWSNMPViolations(62),
swFwSecSESViolations(63),
swFwSecMSViolations(64),
swFwSecSerialViolations(65),
swFwSecFPViolations(66),
swFwSecSCCViolations(67),
swFwSecDCCViolations(68),
swFwSecLoginViolations(69),
swFwSecInvalidTS(70),
swFwSecInvalidSign(71),
swFwSecInvalidCert(72),
swFwSecSlapFail(73),
swFwSecSlapBadPkt(74),
swFwSecTSOutSync(75),
swFwSecNoFcs(76),
swFwSecIncompDB(77),
swFwSecIllegalCmd(78),
swFwSAMTotalDownTime(79),
swFwSAMTotalUpTime(80),
swFwSAMDurationOfOccur(81),
swFwSAMFreqOfOccur(82),
swFwResourceFlash(83),
swFwEPortUtil(84),
swFwEPortPktl(85),
swFwPortLr(86),
swFwEPortLr(87),
swFwFCUPortLr(88),
swFwFOPPortLr(89),
swFwPortC3Discard(90),
swFwEPortC3Discard(91),
swFwFCUPortC3Discard(92),
swFwFOPPortC3Discard(93),
swFwVEPortStateChange(94),
swFwVEPortUtil(95),
swFwVEPortPktLoss(96),
swFwEPortTrunkUtil(97),
swFwFCUPortTrunkUtil(98),
swFwFOPPortTrunkUtil(99),
swFwCPUMemUsage(100)
}
-- write only variable for applying or canceling
-- values or action matrix changes
SwFwWriteVals ::= INTEGER {
swFwCancelWrite(1),
swFwApplyWrite(2)
}
-- timebase for thresholds
SwFwTimebase ::= INTEGER {
swFwTbNone(1),
swFwTbSec(2),
swFwTbMin(3),
swFwTbHour(4),
swFwTbDay(5)
}
-- status for thresholds
SwFwStatus ::= INTEGER {
disabled(1),
enabled(2)
}
-- possible events available
SwFwEvent ::= INTEGER {
started(1),
changed(2),
exceeded(3),
below(4),
above(5),
inBetween(6)
}
-- behavior type for thresholds
SwFwBehavior ::= INTEGER {
triggered(1),
continuous(2)
}
-- state type for last events
SwFwState ::= INTEGER {
swFwInformative(1),
swFwNormal(2),
swFwFaulty(3)
}
-- license state
SwFwLicense ::= INTEGER {
swFwLicensed(1),
swFwNotLicensed(2)
}
-- This is the first of the elements declared for Fabric Watch :
-- one scalar & two tables
-- A scalar, swFwFabricWatchLicense is used to tell is if the switch has
-- proper license for Fabric Watch. Please refer to Fabric Watch
-- documentation for further information.
-- One table contains classArea information such as threshold unit string,
-- time base, low thresholds, etc. The other table contains individual
-- threshold information such as name, label, last event, etc.
-- Please refer to Fabric Watch documentation for further information.
-- license scalar
swFwFabricWatchLicense OBJECT-TYPE
SYNTAX SwFwLicense
MAX-ACCESS read-only
STATUS current
DESCRIPTION "tells if licensed or not."
::= { swFwSystem 1 }
-- classArea table
swFwClassAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwFwClassAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of classes and areas."
::= { swFwSystem 2 }
swFwClassAreaEntry OBJECT-TYPE
SYNTAX SwFwClassAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of the classes and areas."
INDEX { swFwClassAreaIndex }
::= { swFwClassAreaTable 1 }
SwFwClassAreaEntry ::= SEQUENCE {
swFwClassAreaIndex SwFwClassesAreas,
swFwWriteThVals SwFwWriteVals,
swFwDefaultUnit DisplayString,
swFwDefaultTimebase SwFwTimebase,
swFwDefaultLow Integer32,
swFwDefaultHigh Integer32,
swFwDefaultBufSize Integer32,
swFwCustUnit DisplayString,
swFwCustTimebase SwFwTimebase,
swFwCustLow Integer32,
swFwCustHigh Integer32,
swFwCustBufSize Integer32,
swFwThLevel SwFwLevels,
swFwWriteActVals SwFwWriteVals,
swFwDefaultChangedActs SwFwActs,
swFwDefaultExceededActs SwFwActs,
swFwDefaultBelowActs SwFwActs,
swFwDefaultAboveActs SwFwActs,
swFwDefaultInBetweenActs SwFwActs,
swFwCustChangedActs SwFwActs,
swFwCustExceededActs SwFwActs,
swFwCustBelowActs SwFwActs,
swFwCustAboveActs SwFwActs,
swFwCustInBetweenActs SwFwActs,
swFwValidActs SwFwActs,
swFwActLevel SwFwLevels
}
swFwClassAreaIndex OBJECT-TYPE
SYNTAX SwFwClassesAreas
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the class type."
::= { swFwClassAreaEntry 1 }
-- this variable is used to apply or cancel
-- changes made to swFwCustUnit, swFwCustTimebase, swFwCustLow,
-- swFwCustHigh, swFwCustBufSize.
-- read of this variable will always return cancel.
swFwWriteThVals OBJECT-TYPE
SYNTAX SwFwWriteVals
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is set to apply the value changes."
::= { swFwClassAreaEntry 2 }
-- {swFwDefaultUnit, swFwDefaultTimebase, swFwDefaultMin, and swFwDefaultMax}
-- {swFwCustUnit, swFwCustTimebase, swFwCustMin, and swFwCustMax}
-- are grouped together to be applied to give threshold areas as in
--- Default and Cust. Which of default, or custom groups applies depends
--- on swFwThLevel.
swFwDefaultUnit OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A Default unit string name for a threshold area."
::= { swFwClassAreaEntry 3 }
swFwDefaultTimebase OBJECT-TYPE
SYNTAX SwFwTimebase
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A Default timebase for the current threshold counter."
::= { swFwClassAreaEntry 4 }
swFwDefaultLow OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A Default low threshold value."
::= { swFwClassAreaEntry 5 }
swFwDefaultHigh OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A Default high threshold value."
::= { swFwClassAreaEntry 6 }
swFwDefaultBufSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A Default buffer size value."
::= { swFwClassAreaEntry 7 }
swFwCustUnit OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A custom unit string name for a threshold area."
::= { swFwClassAreaEntry 8 }
swFwCustTimebase OBJECT-TYPE
SYNTAX SwFwTimebase
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A custom timebase for the current threshold counter."
::= { swFwClassAreaEntry 9 }
swFwCustLow OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A custom low threshold value."
::= { swFwClassAreaEntry 10 }
swFwCustHigh OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A custom high threshold value."
::= { swFwClassAreaEntry 11 }
swFwCustBufSize OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A custom buffer size value."
::= { swFwClassAreaEntry 12 }
-- swFwThLevel is used to point to current level for classArea
-- values. It is either default or custom.
swFwThLevel OBJECT-TYPE
SYNTAX SwFwLevels
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A level where all the threshold values are set at."
::= { swFwClassAreaEntry 13 }
-- this variable is used to apply or cancel
-- changes made to swFwCustUnit, swFwCustTimebase, swFwCustLow,
-- swFwCustHigh, swFwCustBufSize.
-- read of this variable will always return cancel.
swFwWriteActVals OBJECT-TYPE
SYNTAX SwFwWriteVals
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is set to apply act value changes."
::= { swFwClassAreaEntry 14 }
-- {swFwDefaultChangedActs, swFwDefaultExceededActs, swFwDefaultBelowActs,
-- and swFwDefaultAboveActs} and {swFwCustChangedActs, swFwCustExceededActs,
-- swFwCustBelowActs, and swFwCustAboveActs} are grouped together to be
-- applied to give threshold areas as in default and cust. Which of
-- default, or custom groups applies depends on swFwThLevel.
swFwDefaultChangedActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default action matrix for changed event."
::= { swFwClassAreaEntry 15 }
swFwDefaultExceededActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default action matrix for exceeded event."
::= { swFwClassAreaEntry 16 }
swFwDefaultBelowActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default action matrix for below event."
::= { swFwClassAreaEntry 17 }
swFwDefaultAboveActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default action matrix for above event."
::= { swFwClassAreaEntry 18 }
swFwDefaultInBetweenActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default action matrix for in-between event."
::= { swFwClassAreaEntry 19 }
swFwCustChangedActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "custom action matrix for changed event."
::= { swFwClassAreaEntry 20 }
swFwCustExceededActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "custom action matrix for exceeded event."
::= { swFwClassAreaEntry 21 }
swFwCustBelowActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "custom action matrix for below event."
::= { swFwClassAreaEntry 22 }
swFwCustAboveActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "custom action matrix for above event."
::= { swFwClassAreaEntry 23 }
swFwCustInBetweenActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-write
STATUS current
DESCRIPTION "custom action matrix for in-between event."
::= { swFwClassAreaEntry 24 }
swFwValidActs OBJECT-TYPE
SYNTAX SwFwActs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "matrix of valid acts for an class/area."
::= { swFwClassAreaEntry 25 }
-- swFwActLevel is used to point to current level for classArea
-- action matrix. It is either default or custom.
swFwActLevel OBJECT-TYPE
SYNTAX SwFwLevels
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A level where all the actions are set at."
::= { swFwClassAreaEntry 26 }
-- table for individual threshold
swFwThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwFwThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of individual thresholds."
::= { swFwSystem 3 }
swFwThresholdEntry OBJECT-TYPE
SYNTAX SwFwThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of an individual threshold."
INDEX { swFwClassAreaIndex, swFwThresholdIndex }
::= { swFwThresholdTable 1 }
SwFwThresholdEntry ::= SEQUENCE {
swFwThresholdIndex Integer32,
swFwStatus SwFwStatus,
swFwName DisplayString,
swFwLabel DisplayString,
swFwCurVal Integer32,
swFwLastEvent SwFwEvent,
swFwLastEventVal Integer32,
swFwLastEventTime DisplayString,
swFwLastState SwFwState,
swFwBehaviorType SwFwBehavior,
swFwBehaviorInt Integer32,
swFwLastSeverityLevel SwSevType
}
swFwThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the element index of
an threshold."
::= { swFwThresholdEntry 1 }
swFwStatus OBJECT-TYPE
SYNTAX SwFwStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object identifies if an threshold is
enabled or disabled."
::= { swFwThresholdEntry 2 }
swFwName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a name of the threshold."
::= { swFwThresholdEntry 3 }
swFwLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..70))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a label of the threshold."
::= { swFwThresholdEntry 4 }
swFwCurVal OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a current counter of the threshold."
::= { swFwThresholdEntry 5 }
swFwLastEvent OBJECT-TYPE
SYNTAX SwFwEvent
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a last event type of the threshold."
::= { swFwThresholdEntry 6 }
swFwLastEventVal OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a last event value of the threshold."
::= { swFwThresholdEntry 7 }
swFwLastEventTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a last event time of the threshold."
::= { swFwThresholdEntry 8 }
swFwLastState OBJECT-TYPE
SYNTAX SwFwState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a last event state of the threshold."
::= { swFwThresholdEntry 9 }
swFwBehaviorType OBJECT-TYPE
SYNTAX SwFwBehavior
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A behavior of which the thresholds generate event."
::= { swFwThresholdEntry 10 }
swFwBehaviorInt OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A integer of which the thresholds generate continuous event."
::= { swFwThresholdEntry 11 }
swFwLastSeverityLevel OBJECT-TYPE
SYNTAX SwSevType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a last event severity level of the threshold."
::= { swFwThresholdEntry 12 }
-- swEndDevice Group
-- ###########################################################################
-- table for RLS of end devices.
-- swEndDevice consists of only one table.
-- swEndDeviceRlsTable contains entries of individual end devices' rls.
-- ###########################################################################
swEndDeviceRlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwEndDeviceRlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of individual end devices' rls."
::= { swEndDevice 1 }
swEndDeviceRlsEntry OBJECT-TYPE
SYNTAX SwEndDeviceRlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of an individual end devices' rls."
INDEX { swEndDevicePort, swEndDeviceAlpa }
::= { swEndDeviceRlsTable 1 }
SwEndDeviceRlsEntry ::= SEQUENCE {
swEndDevicePort Integer32,
swEndDeviceAlpa Integer32,
swEndDevicePortID OCTET STRING,
swEndDeviceLinkFailure Counter32,
swEndDeviceSyncLoss Counter32,
swEndDeviceSigLoss Counter32,
swEndDeviceProtoErr Counter32,
swEndDeviceInvalidWord Counter32,
swEndDeviceInvalidCRC Counter32
}
-- Since Silkworm family switches start with port # 0
-- snmp port # should be physical port # + 1.
-- i.e. snmp port # 3 translates to port # 2
swEndDevicePort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the port of the end device."
::= { swEndDeviceRlsEntry 1 }
-- snmp alpa # should be logical alpa # + 1.
-- i.e. snmp alpa # 0xf0 translates to 0xef
swEndDeviceAlpa OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the alpa of the end device."
::= { swEndDeviceRlsEntry 2 }
swEndDevicePortID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object identifies the Fibre Channel port address
ID of the entry."
::= { swEndDeviceRlsEntry 3 }
swEndDeviceLinkFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link failure count for the end device."
::= { swEndDeviceRlsEntry 4 }
swEndDeviceSyncLoss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sync loss count for the end device."
::= { swEndDeviceRlsEntry 5 }
swEndDeviceSigLoss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sig loss count for the end device."
::= { swEndDeviceRlsEntry 6 }
swEndDeviceProtoErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protocol err count for the end device."
::= { swEndDeviceRlsEntry 7 }
swEndDeviceInvalidWord OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Invalid word count for the end device."
::= { swEndDeviceRlsEntry 8 }
swEndDeviceInvalidCRC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Invalid CRC count for the end device."
::= { swEndDeviceRlsEntry 9 }
-- table for displaying all the Groups
swGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of groups. This may not be available
on all versions of Fabric OS."
::= { swGroup 1 }
swGroupEntry OBJECT-TYPE
SYNTAX SwGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry of table of groups."
INDEX { swGroupIndex }
::= { swGroupTable 1 }
SwGroupEntry ::= SEQUENCE {
swGroupIndex Integer32,
swGroupName OCTET STRING,
swGroupType OCTET STRING
}
swGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is the group index starting from 1."
::= { swGroupEntry 1 }
swGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the name of the group."
::= { swGroupEntry 2 }
swGroupType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the type of the group."
::= { swGroupEntry 3 }
-- table for displaying group members for all the groups
swGroupMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwGroupMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of members of all groups. This may not
be available on all versions of Fabric OS."
::= { swGroup 2 }
swGroupMemEntry OBJECT-TYPE
SYNTAX SwGroupMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry for a member of a group."
INDEX { swGroupId, swGroupMemWwn }
::= { swGroupMemTable 1 }
SwGroupMemEntry ::= SEQUENCE {
swGroupId Integer32,
swGroupMemWwn FcWwn,
swGroupMemPos Integer32
}
swGroupId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the Group Id of the
member switch."
::= { swGroupMemEntry 1 }
swGroupMemWwn OBJECT-TYPE
SYNTAX FcWwn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the WWN of the member switch."
::= { swGroupMemEntry 2 }
swGroupMemPos OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies position of the member
switch in the group. This is based on the order
that the switches were added in the group."
::= { swGroupMemEntry 3 }
-- ************************************************************************************
-- Bloom Performance counter tables. *
-- *
-- ************************************************************************************
swBlmPerfALPAMntTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwBlmPerfALPAMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ALPA monitoring counter Table. "
::= { swBlmPerfMnt 1}
swBlmPerfALPAMntEntry OBJECT-TYPE
SYNTAX SwBlmPerfALPAMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " ALPA monitoring counter for given ALPA."
INDEX { swBlmPerfAlpaPort,swBlmPerfAlpaIndx }
::= { swBlmPerfALPAMntTable 1}
SwBlmPerfALPAMntEntry ::= SEQUENCE {
swBlmPerfAlpaPort SwPortIndex,
swBlmPerfAlpaIndx Integer32,
swBlmPerfAlpa Integer32,
swBlmPerfAlpaCRCCnt OCTET STRING
}
swBlmPerfAlpaPort OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION " This Object identifies the port index of the switch."
::= { swBlmPerfALPAMntEntry 1}
swBlmPerfAlpaIndx OBJECT-TYPE
SYNTAX Integer32 (1..126)
MAX-ACCESS read-only
STATUS current
DESCRIPTION " This Object identifies the ALPA index. There can be 126 ALPA values"
::= { swBlmPerfALPAMntEntry 2}
swBlmPerfAlpa OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION " This Object identifies the ALPA values. These values
range between x'01' and x'EF'(1 to 239). ALPA value x'00'
is reserved for FL_Port
If Alpa device is invalid, then it will have -1 value. "
::= { swBlmPerfALPAMntEntry 3}
swBlmPerfAlpaCRCCnt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get CRC count for given ALPA and port. This monitoring
provides information on the number of CRC errors
occurred on the frames destined to each possible ALPA
attached to a specific port."
::= { swBlmPerfALPAMntEntry 4}
swBlmPerfEEMntTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwBlmPerfEEMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " End-to-End monitoring counter Table"
::= { swBlmPerfMnt 2}
swBlmPerfEEMntEntry OBJECT-TYPE
SYNTAX SwBlmPerfEEMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "End-to-End monitoring counter for given port."
INDEX { swBlmPerfEEPort, swBlmPerfEERefKey}
::= { swBlmPerfEEMntTable 1}
SwBlmPerfEEMntEntry ::= SEQUENCE{
swBlmPerfEEPort SwPortIndex,
swBlmPerfEERefKey Integer32,
swBlmPerfEECRC OCTET STRING,
swBlmPerfEEFCWRx OCTET STRING,
swBlmPerfEEFCWTx OCTET STRING,
swBlmPerfEESid Integer32,
swBlmPerfEEDid Integer32
}
swBlmPerfEEPort OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION " This object identifies the port number of the switch."
::= { swBlmPerfEEMntEntry 1}
swBlmPerfEERefKey OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the reference number
of the counter. This reference is number assigned
when a filter is created. In SNMP Index start one
instead of 0, add one to actual ref key"
::= { swBlmPerfEEMntEntry 2}
swBlmPerfEECRC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Get End to End CRC error for the frames that matched
the SID-DID pair."
::= { swBlmPerfEEMntEntry 3}
swBlmPerfEEFCWRx OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get End to End count of Fibre Channel words (FCW),
received by the port, that matched
the SID-DID pair. "
::= { swBlmPerfEEMntEntry 4 }
swBlmPerfEEFCWTx OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get End to End count of Fibre Channel words (FCW),
transmitted by the port, that matched the SID-DID pair. "
::= { swBlmPerfEEMntEntry 5}
swBlmPerfEESid OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Gets SID info by reference number. SID (Source Identifier)
is a 3-byte field in the frame header used to indicate the
address identifier of the N-Port from which the frame was sent."
::= { swBlmPerfEEMntEntry 6 }
swBlmPerfEEDid OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gets DID info by reference number.
DID (Destination Identifier) is a 3-byte field in the
frame header used to indicate the address identifier of
the N-Port to which the frame was sent."
::= { swBlmPerfEEMntEntry 7 }
swBlmPerfFltMntTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwBlmPerfFltMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Filter based monitoring counter."
::= { swBlmPerfMnt 3}
swBlmPerfFltMntEntry OBJECT-TYPE
SYNTAX SwBlmPerfFltMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " Filter base monitoring counter for given port."
INDEX { swBlmPerfFltPort,swBlmPerfFltRefkey}
::= { swBlmPerfFltMntTable 1}
SwBlmPerfFltMntEntry ::= SEQUENCE{
swBlmPerfFltPort SwPortIndex,
swBlmPerfFltRefkey Integer32,
swBlmPerfFltCnt OCTET STRING,
swBlmPerfFltAlias DisplayString
}
swBlmPerfFltPort OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the port number of the switch."
::= { swBlmPerfFltMntEntry 1}
swBlmPerfFltRefkey OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION " This object identifies the reference number of the filter.
This reference number is assigned when a filter is created.
In SNMP Index start one instead of 0, add one to actual ref key"
::= { swBlmPerfFltMntEntry 2}
swBlmPerfFltCnt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get statistics of filter based monitor.
Filter based monitoring provides information
about a filter hit count such as
1. Read command
2. SCSI or IP traffic
3. SCSI Read/Write"
::= { swBlmPerfFltMntEntry 3 }
swBlmPerfFltAlias OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Alias name for the filter."
::= { swBlmPerfFltMntEntry 4}
swSwitchTrunkable OBJECT-TYPE
SYNTAX INTEGER { yes ( 8 ) , no ( 0 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The trunking status of the switch - whether the switch supports the trunking feature or not. The values are
yes(8) - the trunking feature is supported
no(0). - the trunking feature is not supported. "
::= { swTrunk 1}
swTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " Table to display trunking information for the switch. "
::= { swTrunk 2}
swTrunkEntry OBJECT-TYPE
SYNTAX SwTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for the trunking table."
INDEX { swTrunkPortIndex }
::= { swTrunkTable 1}
SwTrunkEntry ::= SEQUENCE{
swTrunkPortIndex SwPortIndex,
swTrunkGroupNumber Integer32,
swTrunkMaster SwTrunkMaster,
swPortTrunked INTEGER
}
swTrunkPortIndex OBJECT-TYPE
SYNTAX SwPortIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the switch port index.
Note that the value of a port index is 1 higher than the
port number labeled on the front panel.
e.g. port index 1 correspond to port number 0. "
::= { swTrunkEntry 1 }
swTrunkGroupNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a logical entity which specifies
the Group Number to which the port belongs to.
If this value is Zero it means the port is not Trunked."
::= { swTrunkEntry 2}
swTrunkMaster OBJECT-TYPE
SYNTAX SwTrunkMaster
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port number that is the trunk master of the group.
The trunk master implicitly defines the group.
All ports with the same master are considered to be part of the same group."
::= { swTrunkEntry 3 }
swPortTrunked OBJECT-TYPE
SYNTAX INTEGER {disabled(0), enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The active trunk status for a member port.
Values are enabled(1) or disabled(0)."
::= { swTrunkEntry 4 }
swTrunkGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwTrunkGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to display trunking Performance
information for the switch."
::= { swTrunk 3}
swTrunkGrpEntry OBJECT-TYPE
SYNTAX SwTrunkGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for the trunking Group table."
INDEX { swTrunkGrpNumber}
::= { swTrunkGrpTable 1}
SwTrunkGrpEntry ::= SEQUENCE{
swTrunkGrpNumber Integer32,
swTrunkGrpMaster SwTrunkMaster,
swTrunkGrpTx OCTET STRING,
swTrunkGrpRx OCTET STRING
}
swTrunkGrpNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object is a logical entity which
specifies the Group Number to which port
belongs to."
::= { swTrunkGrpEntry 1 }
swTrunkGrpMaster OBJECT-TYPE
SYNTAX SwTrunkMaster
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object gives the master port id
for the TrunkGroup."
::= { swTrunkGrpEntry 2 }
swTrunkGrpTx OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gives the aggregate value of the
transmitted words from this TrunkGroup."
::= { swTrunkGrpEntry 3}
swTrunkGrpRx OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gives the aggregate value of the
received words by this TrunkGroup."
::= { swTrunkGrpEntry 4 }
swTopTalkerMntMode OBJECT-TYPE
SYNTAX INTEGER {
fabricmode (1),
fportmode (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gives the mode in which toptalker
is installed"
::= { swTopTalker 1}
swTopTalkerMntNumEntries OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gives the number of toptalking
flows"
::= { swTopTalker 2}
swTopTalkerMntTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwTopTalkerMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to display toptalkingflows"
::= { swTopTalker 3}
swTopTalkerMntEntry OBJECT-TYPE
SYNTAX SwTopTalkerMntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for the toptalker table"
INDEX{ swTopTalkerMntIndex}
::= { swTopTalkerMntTable 1}
SwTopTalkerMntEntry ::= SEQUENCE{
swTopTalkerMntIndex Integer32,
swTopTalkerMntPort Integer32,
swTopTalkerMntSpid Integer32,
swTopTalkerMntDpid Integer32,
swTopTalkerMntflow Integer32,
swTopTalkerMntSwwn FcWwn,
swTopTalkerMntDwwn FcWwn
}
swTopTalkerMntIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the list/object
entry"
::= { swTopTalkerMntEntry 1}
swTopTalkerMntPort OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the switch port
number on which the f-port mode toptalker
is added."
::= { swTopTalkerMntEntry 2}
swTopTalkerMntSpid OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the SID of the host"
::= { swTopTalkerMntEntry 3}
swTopTalkerMntDpid OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the DID of the SID-DID pair"
::= { swTopTalkerMntEntry 4}
swTopTalkerMntflow OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the traffic flow in MB/sec"
::= { swTopTalkerMntEntry 5}
swTopTalkerMntSwwn OBJECT-TYPE
SYNTAX FcWwn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the SID in WWN format of the host"
::= { swTopTalkerMntEntry 6}
swTopTalkerMntDwwn OBJECT-TYPE
SYNTAX FcWwn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object identifies the DID in WWN format of the SID-DID pair"
::= { swTopTalkerMntEntry 7}
swCpuUsage OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System's cpu usage."
::= { swCpuOrMemoryUsage 1 }
swCpuNoOfRetries OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of times system should take cpu utilization sample before sending the CPU utilization trap."
::= { swCpuOrMemoryUsage 2 }
swCpuUsageLimit OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CPU usage limit"
::= { swCpuOrMemoryUsage 3 }
swCpuPollingInterval OBJECT-TYPE
SYNTAX Integer32 (10..3600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time interval between two memory samples."
::= { swCpuOrMemoryUsage 4 }
swCpuAction OBJECT-TYPE
SYNTAX Integer32 (0..3)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the actions to be taken if system
resources exceed the specified threshold."
::= { swCpuOrMemoryUsage 5 }
swMemUsage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System's memory usage."
::= { swCpuOrMemoryUsage 6 }
swMemNoOfRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of times system should take memory usage sample before sending the memory usage trap."
::= { swCpuOrMemoryUsage 7 }
swMemUsageLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Memory usage limit"
::= { swCpuOrMemoryUsage 8 }
swMemPollingInterval OBJECT-TYPE
SYNTAX Integer32 (10..3600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time interval between two memory samples."
::= { swCpuOrMemoryUsage 9 }
swMemAction OBJECT-TYPE
SYNTAX Integer32 (0..3)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the actions to be taken if system
resources exceed the specified threshold."
::= { swCpuOrMemoryUsage 10 }
swMemUsageLimit1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Low memory usage limit"
::= { swCpuOrMemoryUsage 11 }
swMemUsageLimit3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High memory usage limit"
::= { swCpuOrMemoryUsage 12 }
swConnUnitPortStatEntry OBJECT-TYPE
SYNTAX SwConnUnitPortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This represents the Conn unit Port Stats"
AUGMENTS {connUnitPortStatEntry}
::= { swConnUnitPortStatExtentionTable 1 }
SwConnUnitPortStatEntry ::= SEQUENCE {
swConnUnitCRCWithBadEOF OCTET STRING,
swConnUnitZeroTenancy OCTET STRING,
swConnUnitFLNumOfTenancy OCTET STRING,
swConnUnitNLNumOfTenancy OCTET STRING,
swConnUnitStopTenancyStarVation OCTET STRING,
swConnUnitOpend OCTET STRING,
swConnUnitTransferConnection OCTET STRING,
swConnUnitOpen OCTET STRING,
swConnUnitInvalidARB OCTET STRING,
swConnUnitFTB1Miss OCTET STRING,
swConnUnitFTB2Miss OCTET STRING,
swConnUnitFTB6Miss OCTET STRING,
swConnUnitZoneMiss OCTET STRING,
swConnUnitLunZoneMiss OCTET STRING,
swConnUnitBadEOF OCTET STRING,
swConnUnitLCRX OCTET STRING,
swConnUnitRDYPriority OCTET STRING,
swConnUnitLli OCTET STRING
}
swConnUnitCRCWithBadEOF OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of frames with CRC error with Bad EOF."
::= { swConnUnitPortStatEntry 1 }
swConnUnitZeroTenancy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the FL_port acquires the loop but does not transmit a frame."
::= { swConnUnitPortStatEntry 2 }
swConnUnitFLNumOfTenancy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the FL_port acquires the loop."
::= { swConnUnitPortStatEntry 3 }
swConnUnitNLNumOfTenancy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the NL_port acquires the loop."
::= { swConnUnitPortStatEntry 4 }
swConnUnitStopTenancyStarVation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the FL_port can not transmit a frame because of lack of credit."
::= { swConnUnitPortStatEntry 5 }
swConnUnitOpend OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times FC port entered OPENED state."
::= { swConnUnitPortStatEntry 6 }
swConnUnitTransferConnection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times FC port entered TRANSFER state."
::= { swConnUnitPortStatEntry 7 }
swConnUnitOpen OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times FC port entered OPEN state."
::= { swConnUnitPortStatEntry 8 }
swConnUnitInvalidARB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times FC port received invalid ARB."
::= { swConnUnitPortStatEntry 9 }
swConnUnitFTB1Miss OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the port receives a frame with a DID that can not be routed by FCR.. Applicable to 8G platforms only."
::= { swConnUnitPortStatEntry 10 }
swConnUnitFTB2Miss OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the port receives a frame with an SID/DID combination that can not be routed by the VF module.Applicable to 8G platforms only."
::= { swConnUnitPortStatEntry 11 }
swConnUnitFTB6Miss OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when port receives a frame with an SID that can not be routed by FCR. Applicable to 8G platforms."
::= { swConnUnitPortStatEntry 12 }
swConnUnitZoneMiss OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the port receives a frame with an SID and DID that are not zoned together."
::= { swConnUnitPortStatEntry 13 }
swConnUnitLunZoneMiss OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This counter is incremented when the port receives a frame with an SID, DID and LUN that are not zoned together( This is not currently used )."
::= { swConnUnitPortStatEntry 14 }
swConnUnitBadEOF OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of frames with bad end-of-frame."
::= { swConnUnitPortStatEntry 15 }
swConnUnitLCRX OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of link control frames received."
::= { swConnUnitPortStatEntry 16 }
swConnUnitRDYPriority OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times that sending R_RDY or VC_RDY primitive signals was a higher priority than sending frames, due to diminishing credit reserves in the transmitter at the other end of the fibre."
::= { swConnUnitPortStatEntry 17 }
swConnUnitLli OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number low level interrupts generated by the physical and link layer."
::= { swConnUnitPortStatEntry 18 }
--
-- Enterprise Specific Traps for Fibre Channel Switch (sw).
--
swTrapsV2 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The Traps for Brocade's Fibre Channel Switch."
::= { sw 0 }
swFault NOTIFICATION-TYPE
OBJECTS { swDiagResult, swSsn , swGroupName, swGroupType, swGroupMemPos
}
STATUS obsolete
DESCRIPTION "Obsoleted this trap as firmware doesn't support this trap.
A swFault(1) is generated whenever the diagnostics
detects a fault with the switch."
--#TYPE "Switch is faulty."
--#SUMMARY "Faulty reason: %d and SSN is #%s,GroupName %s,GroupType %s,GroupMemPosition %d""
--#ARGUMENTS { 0, 1, 2, 3, 4}
--#SEVERITY CRITICAL
--#TIMEINDEX 1
--#STATE NONOPERATIONAL
::= { swTrapsV2 1 }
swSensorScn NOTIFICATION-TYPE
OBJECTS { swSensorStatus, swSensorIndex, swSensorType,
swSensorValue, swSensorInfo, swSsn,
swGroupName, swGroupType, swGroupMemPos
}
STATUS current
DESCRIPTION "A swSensorScn(2) is generated whenever an
environment sensor changes its operational state. For instance,
a fan stop working. The VarBind in the Trap Data Unit shall
contain the corresponding instance of the sensor
status, sensor index, sensor type, sensor value (reading)
and sensor information. Note that the sensor information contains the type of sensor
and its number in textual format."
--#TYPE "A sensor (temperature, fan, etc.) changed its operational state."
--#SUMMARY "%s: is currently in state %d and SSN is #%s"
--#ARGUMENTS { 4, 0, 5 }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 2 }
swFCPortScn NOTIFICATION-TYPE
OBJECTS { swFCPortOpStatus, swFCPortIndex, swFCPortName,
swSsn, swFCPortFlag, swGroupName, swGroupType,
swGroupMemPos, swVfId }
STATUS current
DESCRIPTION "A swFCPortScn(3) is generated whenever an FC_Port
changes its operational state. For instance, the FC_Port
goes from on-line to offline. The VarBind in the Trap Data
Unit shall contain the corresponding instance of the
FC_Port's operational status, index, swFCPortName,swSsn and
swFCPortFlag. swSsn is optional varbind sent when swExtTrap
is also enabled.swVfId is optional if VF is enabled.
The three arguments swGroupName, swGroupType,
swGroupMemPos belong to swGroup table which is obsolete
and not implemented."
--#TYPE "A Fibre Channel Port changed its operational state."
--#SUMMARY "Port Index %d changed state to %d Port Name: %s and SSN is #%s"
--#ARGUMENTS { 1, 0, 2, 3 }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 3 }
swEventTrap NOTIFICATION-TYPE
OBJECTS { swEventIndex, swEventTimeInfo, swEventLevel,
swEventRepeatCount, swEventDescr, swSsn,
swGroupName,swGroupType,swGroupMemPos,swVfId }
STATUS current
DESCRIPTION "This trap is generated when an event whose
level at or below swEventTrapLevel occurs."
--#TYPE "A firmware event has been logged"
--#SUMMARY "Event %d: %s (severity level %d) - %s SSN is #%s"
--#ARGUMENTS { 0, 1, 2, 4, 5 }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 4 }
-- traps for Fabric Watch subsystem
swFabricWatchTrap NOTIFICATION-TYPE
OBJECTS { swFwClassAreaIndex,
swFwThresholdIndex,
swFwName,
swFwLabel,
swFwLastEventVal,
swFwLastEventTime,
swFwLastEvent,
swFwLastState,
swFwLastSeverityLevel,
swSsn,
swGroupName,
swGroupType,
swGroupMemPos,
swVfId
}
STATUS current
DESCRIPTION "trap to be sent by Fabric Watch to notify of an event"
--#TYPE "Fabric Watch has generated an event"
--#SUMMARY "Threshold %s in Class/Area %d at index %d has generated event %d with %d on %s. This event is %d. This event label is %d, event severity level is %d and SSN is #%s"
--#ARGUMENTS { 2, 0, 1, 6, 4, 5, 7, 3, 8, 9 }
--#SEVERITY WARNING
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 5 }
-- traps for track changes subsystem
swTrackChangesTrap NOTIFICATION-TYPE
OBJECTS { swTrackChangesInfo, swSsn,
swGroupName, swGroupType, swGroupMemPos,
swVfId
}
STATUS current
DESCRIPTION "trap to be sent for tracking login/logout/config changes"
--#TYPE "Track changes has generated a trap"
--#SUMMARY "%s and SSN is #%s"
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 6 }
swIPv6ChangeTrap NOTIFICATION-TYPE
OBJECTS { swIPv6Address, swIPv6Status }
STATUS current
DESCRIPTION "This trap is generated when an ipv6 address
status change event occurs."
--#TYPE "IPv6 address status change has generated a trap"
--#SUMMARY
--#ARGUMENTS
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 7 }
swPmgrEventTrap NOTIFICATION-TYPE
OBJECTS { swPmgrEventType, swPmgrEventTime, swPmgrEventDescr, swSsn, swVfId }
STATUS current
DESCRIPTION "This trap is generated when any partition manager
change happens."
--#TYPE "Partition manager status change has generated a trap"
--#SUMMARY "pmgr event of type %d occured on %d swVfId and SSN is #%s. Time is %s and the description is %s"
--#ARGUMENTS { 0, 4, 3, 1, 2 }
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 8 }
swFabricReconfigTrap NOTIFICATION-TYPE
OBJECTS { swDomainID }
STATUS current
DESCRIPTION "trap to be sent for tracking fabric reconfiguration"
--#TYPE "Fabric reconfiguration has generated a trap"
--#SUMMARY
--#ARGUMENTS
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 9 }
swFabricSegmentTrap NOTIFICATION-TYPE
OBJECTS { swFCPortIndex, swFCPortName, swSsn,
swFCPortFlag, swVfId }
STATUS current
DESCRIPTION "trap to be sent for tracking segmentation"
--#TYPE "Fabric segmentation has generated a trap"
--#SUMMARY
--#ARGUMENTS
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 1
--#STATE OPERATIONAL
::= { swTrapsV2 10 }
swExtTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION "THIS IS INTERNAL TRAP"
::= { swTrapsV2 11 }
-- end of Enterprise Specific Traps for Fibre Channel Switch (sw)
END