david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/comware/HH3C-FCOE-MIB

870 lines
32 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- =============================================================================
-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
-- This MIB module is for configuring and monitoring Fibre Channel
-- over Ethernet (FCoE) related entities.
-- Reference:
-- Version: V1.2
-- History:
-- V1.0 created by h06247
-- V1.1 Added hh3cFCoEFIPSnoopingTable by zhangchangjun 02876.
-- Modified the range of hh3cFCoECfgDATov by wangyuqiang 08530.
-- V1.2 Added hh3cFCoEVlanCfgTable by chengzhipeng 04378 2014-05-09
-- Modified the range of hh3cFCoECfgDATov by chengzhipeng 04378.
-- Added hh3cFCoEFIPSnoopingFCFTable, hh3cFCoEFIPSnoopingENodeTable,
-- hh3cFCoEFIPSnoopingVNTable and hh3cFCoEFIPSnoopingIfCfgTable by
-- h06247 2014-11-12
-- =============================================================================
HH3C-FCOE-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cCommon FROM HH3C-OID-MIB
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32 FROM SNMPv2-SMI -- [RFC2578]
RowStatus, TimeStamp,
TruthValue, MacAddress,
TEXTUAL-CONVENTION FROM SNMPv2-TC -- [RFC2578]
SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
InterfaceIndex,
InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
VlanIndex FROM Q-BRIDGE-MIB -- [RFC4363]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
fcmInstanceIndex FROM FC-MGMT-MIB -- [RFC4044]
Hh3cFcNameId FROM HH3C-FC-TC-MIB;
hh3cFCoE MODULE-IDENTITY
LAST-UPDATED "201411120000Z"
ORGANIZATION
"New H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip: 100085"
DESCRIPTION
"This MIB module is for configuring and monitoring Fibre Channel
over Ethernet (FCoE) related entities. This MIB defines a
Virtual FC (VFC) Interface as an object that represents either
a VF_Port or a VE_Port on an FCoE Forwarder (FCF). VFC
interfaces can be created either statically (by management
request) or dynamically (at the time of FIP based FLOGI or ELP
request).
Other terminologies used in this MIB are defined by the
Hh3c FCoE standard, as defined in the FC-BB-5 specification.
This MIB also supports configuration of the following objects:
- Mapping of FCoE VLAN-ID used to carry traffic for a Fabric
- FC-MAP value used by the FCF operating in FPMA mode
- FIP snooping related objects"
REVISION "201411120000Z"
DESCRIPTION
"Added hh3cFCoEFIPSnoopingFCFTable, hh3cFCoEFIPSnoopingENodeTable
hh3cFCoEFIPSnoopingVNTable and hh3cFCoEFIPSnoopingIfCfgTable."
REVISION "201203280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { hh3cCommon 120 }
hh3cFCoEObjects OBJECT IDENTIFIER
::= { hh3cFCoE 1 }
hh3cFCoEConfig OBJECT IDENTIFIER
::= { hh3cFCoEObjects 1 }
Hh3cFCoEVfcBindType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines the different methods to identify (or bind to)
- the ENode associated with a particular VF_Port VFC
- the remote-FCF associated with a particular VE_Port VFC
interfaceIndex(1) - This type is used only when an ENode
or remote-FCF is directly connected to the local FCF
via one of the local Ethernet interfaces, in which
case the value contains the ifIndex of said Ethernet
interface.
macAddress(2) - This type is used when an ENode or
remote-FCF is reachable from the local FCF over a
(Layer-2) Ethernet network. A FIP frame from an
ENode or remote-FCF is associated to a VFC only if
the frame's source MAC address is the same as the
MAC Address bound on that VFC."
SYNTAX INTEGER {
interfaceIndex(1),
macAddress(2)
}
--
-- FCoE Globals per Switch in a Fibre Channel Management Instance
-- Fibre Channel Management instance is defined in [RFC4044] as a
-- separable managed instance of Fibre Channel functionality.
-- Fibre Channel functionality may be grouped into Fibre
-- Channel management instances in whatever way is most
-- convenient for the implementation(s).
--
-- RFC4044 also defines the fcmSwitchTable as a table of
-- information about Fibre Channel switches which are managed
-- by Fibre Channel management instances. Each Fibre Channel
-- management instance can manage one or more Fibre Channel
-- switches. The Switch Index, fcmSwitchIndex, is
-- IMPORTed from the FC-MGMT-MIB as the index value
-- to uniquely identify a Fibre Channel switch amongst
-- those (one or more) managed by the same Fibre
-- Channel management instance.
-- In this MIB, the same fcmSwitchIndex is used to
-- identify each FCF and to distinguish it from other
-- FCFs and from other Fibre Channel switches.
--
--
hh3cFCoECfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoECfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table facilitates configuration of FCoE parameters
on a per Fibre Channel management instance."
::= { hh3cFCoEConfig 1 }
hh3cFCoECfgEntry OBJECT-TYPE
SYNTAX Hh3cFCoECfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each
Fibre Channel management instance."
INDEX {
fcmInstanceIndex
}
::= { hh3cFCoECfgTable 1 }
Hh3cFCoECfgEntry ::= SEQUENCE {
hh3cFCoECfgFcmap OCTET STRING,
hh3cFCoECfgDynamicVfcCreation TruthValue,
hh3cFCoECfgDefaultFCFPriority Unsigned32,
hh3cFCoECfgDATov Unsigned32,
hh3cFCoECfgAddressingMode INTEGER
}
hh3cFCoECfgFcmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the FC-MAP value used by the FCF
when operating in FPMA mode. The default value is 0EFC00h,
as written in the standard."
REFERENCE
"Fibre Channel - Backbone - 5 (FC-BB-5),
section 7.6 and table 47"
DEFVAL { '0EFC00'h }
::= { hh3cFCoECfgEntry 1 }
hh3cFCoECfgDynamicVfcCreation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to 'true' to enable, or 'false' to
disable, the dynamic creation of VFC interfaces on this FCF.
When set to 'true', VFC interfaces are dynamically created
as and when a FIP-based FLOGI or ELP request is received."
DEFVAL { false }
::= { hh3cFCoECfgEntry 2 }
hh3cFCoECfgDefaultFCFPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FIP priority value advertised by the FCF to ENodes by
default. hh3cFCoEStaticVfcFCFPriority configured for a VFC
interface overrides this setting for the ENode associated
with the VFC."
DEFVAL { 128 }
::= { hh3cFCoECfgEntry 3 }
hh3cFCoECfgDATov OBJECT-TYPE
SYNTAX Unsigned32 (4..600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Discovery_Advertisement_Timeout value configured for
the FCF. This is used as the timeout value in seconds by
the FCF to send periodic Discovery Advertisements."
DEFVAL { 8 }
::= { hh3cFCoECfgEntry 4 }
hh3cFCoECfgAddressingMode OBJECT-TYPE
SYNTAX INTEGER {
fpma(1),
spma(2),
fpmaAndSpma(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Addressing mode(s) supported by the FCF. Implementations
should fail SetRequests for unsupported modes."
::= { hh3cFCoECfgEntry 5 }
hh3cFCoEVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In fabrics in which VLANs are deployed, this table facilitates
configuration of VLAN and Virtual Fabric associations in an
FCoE network. In such fabrics, FCoE forwarding for a fabric
is over a VLAN in a (Layer-2) Ethernet network. That is,
reachability between the ENode/remote-FCF and an FCF for a
given fabric is determined by the reachability provided by the
Ethernet network on the corresponding VLAN.
An active entry in this table indicates which VLAN is used
to transport FCoE traffic for a particular Virtual Fabric.
If VLANs are not deployed or not enabled, entries in this table
are ignored by the bridge.
Some implementations may allow traffic from only one Virtual
Fabric to be transported over a given VLAN. Such
implementations should prevent multiple entries with the same
VLAN-ID from being created in this table.
Modifying existing VLAN-Virtual Fabric associations is not
possible. The specific row must first be deleted and then
a new one created."
::= { hh3cFCoEConfig 2 }
hh3cFCoEVLANEntry OBJECT-TYPE
SYNTAX Hh3cFCoEVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each VLAN that is
designated to transport FCoE traffic for a given Virtual
Fabric."
INDEX {
fcmInstanceIndex,
hh3cFCoEVLANIndex,
hh3cFCoEFabricIndex
}
::= { hh3cFCoEVLANTable 1 }
Hh3cFCoEVLANEntry ::= SEQUENCE {
hh3cFCoEVLANIndex VlanIndex,
hh3cFCoEFabricIndex T11FabricIndex,
hh3cFCoEVLANOperState INTEGER,
hh3cFCoEVLANRowStatus RowStatus
}
hh3cFCoEVLANIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the VLAN-ID that the FCoE FCF function
is being enabled for."
::= { hh3cFCoEVLANEntry 1 }
hh3cFCoEFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the Fabric Index of the Virtual Fabric
traffic which is to be transported over the VLAN identified
by hh3cFCoEVLANIndex."
::= { hh3cFCoEVLANEntry 2 }
hh3cFCoEVLANOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state of this VLAN-Virtual Fabric association
entry. The 'up' state is achieved when both the Virtual
Fabric and VLAN are valid."
::= { hh3cFCoEVLANEntry 3 }
hh3cFCoEVLANRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. The RowStatus becomes active
on successful creation of an entry."
::= { hh3cFCoEVLANEntry 4 }
hh3cFCoEStaticVfcTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEStaticVfcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table facilitates the creation and deletion of static
VFC interfaces. While VFCs can be dynamically created based on
FIP FLOGI/ELP requests, operators may want to associate certain
pre-configured policy for a particular ENode or a remote-FCF.
In such cases static VFC creation becomes necessary. In addition
to being creating, a static VFC also needs to be associated to
an ENode or remote-FCF. The VFC binding provides such an
association. The binding does not need to be specified when
the row for a VFC is created, but may be specified later."
::= { hh3cFCoEConfig 3 }
hh3cFCoEStaticVfcEntry OBJECT-TYPE
SYNTAX Hh3cFCoEStaticVfcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each statically created
VFC Interface."
INDEX {
fcmInstanceIndex,
hh3cFCoEStaticVfcIndex
}
::= { hh3cFCoEStaticVfcTable 1 }
Hh3cFCoEStaticVfcEntry ::= SEQUENCE {
hh3cFCoEStaticVfcIndex Unsigned32,
hh3cFCoEStaticVfcFCFPriority Unsigned32,
hh3cFCoEStaticVfcBindType Hh3cFCoEVfcBindType,
hh3cFCoEStaticVfcBindIfIndex InterfaceIndexOrZero,
hh3cFCoEStaticVfcBindMACAddress MacAddress,
hh3cFCoEStaticVfcIfIndex InterfaceIndex,
hh3cFCoEStaticVfcCreationTime TimeStamp,
hh3cFCoEStaticVfcFailureCause SnmpAdminString,
hh3cFCoEStaticVfcRowStatus RowStatus
}
hh3cFCoEStaticVfcIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index uniquely identifies a static VFC entry in this
table."
::= { hh3cFCoEStaticVfcEntry 1 }
hh3cFCoEStaticVfcFCFPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this VFC is for a VF_Port this object is used to configure
FCF priority to be advertised to the ENode associated with the
VFC."
DEFVAL { 128 }
::= { hh3cFCoEStaticVfcEntry 2 }
hh3cFCoEStaticVfcBindType OBJECT-TYPE
SYNTAX Hh3cFCoEVfcBindType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mechanism to identify the ENode associated with this VFC
if it is of type VF_Port or to identify the remote-FCF
associated with this VFC if it is of type VE_Port."
::= { hh3cFCoEStaticVfcEntry 3 }
hh3cFCoEStaticVfcBindIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is applicable only when the local FCF is
directly connected to an ENode or remote-FCF over a
specific Ethernet interface, in which case this object
contains the ifIndex of said Ethernet interface.
If the ENode or remote-FCF is not directly connected
to the FCF, this value of this object is zero."
::= { hh3cFCoEStaticVfcEntry 4 }
hh3cFCoEStaticVfcBindMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is applicable when the ENode or remote-FCF to
which the local FCF is connected is identified by a MAC
address. A FIP frame from an ENode or remote-FCF is
associated with this VFC only if the source MAC address
in the frame is the same as the value of this object."
::= { hh3cFCoEStaticVfcEntry 5 }
hh3cFCoEStaticVfcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of this Virtual FC interface."
::= { hh3cFCoEStaticVfcEntry 6 }
hh3cFCoEStaticVfcCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of this entry's creation time."
::= { hh3cFCoEStaticVfcEntry 7 }
hh3cFCoEStaticVfcFailureCause OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cause of failure for the last bind operation. This
object will be zero length if and only if the bind is
successful."
::= { hh3cFCoEStaticVfcEntry 8 }
hh3cFCoEStaticVfcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. The RowStatus becomes
active on successful creation of a VFC. The VFC does not
need to be bound for the row to be active, but the VFC must
be bound before becoming operational."
::= { hh3cFCoEStaticVfcEntry 9 }
--
-- FIP Snooping related objects used to configure FIP Snooping
-- on a (FIP-aware) Ethernet Bridge
--
hh3cFCoEFIPSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FCoE provides increased flexibility, but with this flexibility
new challenges arise in assuring highly robust Fabrics. The FCF
does not have the complete control that a Fibre Channel switch
has.
Ethernet bridges commonly provide a feature called Access Control
Lists (ACLs). Properly configured ACLs may emulate a point-to-point
link by providing the traffic enforcement previously discussed.
Furthermore, the FIP protocol has been designed to enable Ethernet
bridges to efficiently monitor FIP frames passing through them. This
data facilitates the automatic configuration of these ACLs. In
addition, the automatic configuration is possible independent of
any other ACLs that may be in use in the network for other
applications. And FIP Snooping is to maintain these ACLs."
::= { hh3cFCoEConfig 4 }
hh3cFCoEFIPSnoopingEntry OBJECT-TYPE
SYNTAX Hh3cFCoEFIPSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each VLAN that is
designated to ensure that only valid FCoE traffic is allowed."
INDEX {
fcmInstanceIndex,
hh3cFCoEFIPSnoopingVLANIndex
}
::= { hh3cFCoEFIPSnoopingTable 1 }
Hh3cFCoEFIPSnoopingEntry ::= SEQUENCE {
hh3cFCoEFIPSnoopingVLANIndex VlanIndex,
hh3cFCoEFIPSnoopingEnable TruthValue,
hh3cFCoEFIPSnoopingFcmap OCTET STRING
}
hh3cFCoEFIPSnoopingVLANIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the VLAN-ID that the FIP Snooping function
is being enabled for."
::= { hh3cFCoEFIPSnoopingEntry 1 }
hh3cFCoEFIPSnoopingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable FIP Snooping on an
Ethernet Bridge."
DEFVAL { false }
::= { hh3cFCoEFIPSnoopingEntry 2 }
hh3cFCoEFIPSnoopingFcmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the FC-MAP value associated with the
FIP snooping Ethernet Bridge."
DEFVAL { '0EFC00'h }
::= { hh3cFCoEFIPSnoopingEntry 3 }
-- VLAN FCoE Configuration
hh3cFCoEVlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains FCoE related configurations and information of VLANs.
An entry in this table is created when the corresponding VLAN
is created and FCoE is enabled for the VLAN, as well as deleted when
the VLAN is deleted or FCoE is disabled for the VLAN.
If the switch mode is not FCF-NPV mode, all the operations
on any object in this table result in errors."
::= { hh3cFCoEConfig 5 }
hh3cFCoEVlanCfgEntry OBJECT-TYPE
SYNTAX Hh3cFCoEVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry used for managing the FCoE related configurations of a VLAN."
INDEX { hh3cFCoEVLANIndex }
::= { hh3cFCoEVlanCfgTable 1}
Hh3cFCoEVlanCfgEntry ::= SEQUENCE {
hh3cFCoEVlanCfgFcmap OCTET STRING,
hh3cFCoEVlanCfgFCFPriority Unsigned32,
hh3cFCoEVlanCfgDATov Unsigned32,
hh3cFCoEVlanCfgRowStatus RowStatus
}
hh3cFCoEVlanCfgFcmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object configures the FC-MAP value used by the FCF in a VLAN
when operating in FPMA mode.
If this object is not configured, the default value is 0EFC00h."
DEFVAL { '0EFC00'h }
::= { hh3cFCoEVlanCfgEntry 1 }
hh3cFCoEVlanCfgFCFPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The FIP priority value advertised by the FCF in a VLAN to ENodes by
default.
If this object is not configured, the default value is 128."
DEFVAL { 128 }
::= { hh3cFCoEVlanCfgEntry 2 }
hh3cFCoEVlanCfgDATov OBJECT-TYPE
SYNTAX Unsigned32 (4..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Discovery_Advertisement_Timeout value configured for
the FCF in a VLAN.
This is used as the timeout value in seconds by
the FCF in a VLAN to send periodic Discovery Advertisements.
If this object is not configured, the default value is 8."
DEFVAL { 8 }
::= { hh3cFCoEVlanCfgEntry 3 }
hh3cFCoEVlanCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Now only three states are supported:
createAndGo, active, and destroy."
::= { hh3cFCoEVlanCfgEntry 4 }
-- FIP Snooping FCF information
hh3cFCoEFIPSnoopingFCFTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingFCFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the remote FCF information on device."
::= { hh3cFCoEConfig 6 }
hh3cFCoEFIPSnoopingFCFEntry OBJECT-TYPE
SYNTAX Hh3cFCoEFIPSnoopingFCFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a FCF for a VLAN."
INDEX {
fcmInstanceIndex,
hh3cFCoEFIPSnoopingFCFVLANIndex,
hh3cFCoEFIPSnoopingFCFIfIndex,
hh3cFCoEFIPSnoopingFCFMAC
}
::= { hh3cFCoEFIPSnoopingFCFTable 1 }
Hh3cFCoEFIPSnoopingFCFEntry ::= SEQUENCE {
hh3cFCoEFIPSnoopingFCFVLANIndex VlanIndex,
hh3cFCoEFIPSnoopingFCFIfIndex InterfaceIndex,
hh3cFCoEFIPSnoopingFCFMAC MacAddress,
hh3cFCoEFIPSnoopingFCFSwitchName Hh3cFcNameId,
hh3cFCoEFIPSnoopingFCFFabricName Hh3cFcNameId,
hh3cFCoEFIPSnoopingFCFENodeCount Unsigned32
}
hh3cFCoEFIPSnoopingFCFVLANIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the VLAN-ID whose FIP Snooping function
gets ready on the FCF."
::= { hh3cFCoEFIPSnoopingFCFEntry 1 }
hh3cFCoEFIPSnoopingFCFIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index uniquely identifies an Ethernet interface that connects
to the FCF."
::= { hh3cFCoEFIPSnoopingFCFEntry 2 }
hh3cFCoEFIPSnoopingFCFMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the Ethernet interface on the FCF directly
connected to the local device."
::= { hh3cFCoEFIPSnoopingFCFEntry 3 }
hh3cFCoEFIPSnoopingFCFSwitchName OBJECT-TYPE
SYNTAX Hh3cFcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch name of the FCF."
::= { hh3cFCoEFIPSnoopingFCFEntry 4 }
hh3cFCoEFIPSnoopingFCFFabricName OBJECT-TYPE
SYNTAX Hh3cFcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fabric name of the FCF."
::= { hh3cFCoEFIPSnoopingFCFEntry 5 }
hh3cFCoEFIPSnoopingFCFENodeCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ENodes that log in through this Ethernet port."
::= { hh3cFCoEFIPSnoopingFCFEntry 6 }
-- FIP Snooping ENode information
hh3cFCoEFIPSnoopingENodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingENodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the ENode information on the local device."
::= { hh3cFCoEConfig 7 }
hh3cFCoEFIPSnoopingENodeEntry OBJECT-TYPE
SYNTAX Hh3cFCoEFIPSnoopingENodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about an ENode for a VLAN."
INDEX {
fcmInstanceIndex,
hh3cFCoEFIPSnoopingENodeVLANIndex,
hh3cFCoEFIPSnoopingENodeIfIndex,
hh3cFCoEFIPSnoopingENodeMAC
}
::= { hh3cFCoEFIPSnoopingENodeTable 1 }
Hh3cFCoEFIPSnoopingENodeEntry ::= SEQUENCE {
hh3cFCoEFIPSnoopingENodeVLANIndex VlanIndex,
hh3cFCoEFIPSnoopingENodeIfIndex InterfaceIndex,
hh3cFCoEFIPSnoopingENodeMAC MacAddress,
hh3cFCoEFIPSnoopingENodeName Hh3cFcNameId
}
hh3cFCoEFIPSnoopingENodeVLANIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the VLAN-ID whose FIP Snooping function
gets ready on the ENode."
::= { hh3cFCoEFIPSnoopingENodeEntry 1 }
hh3cFCoEFIPSnoopingENodeIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index uniquely identifies an Ethernet interface that connects
to the ENode."
::= { hh3cFCoEFIPSnoopingENodeEntry 2 }
hh3cFCoEFIPSnoopingENodeMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the ENode."
::= { hh3cFCoEFIPSnoopingENodeEntry 3 }
hh3cFCoEFIPSnoopingENodeName OBJECT-TYPE
SYNTAX Hh3cFcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of the ENode."
::= { hh3cFCoEFIPSnoopingENodeEntry 4 }
-- FIP Snooping VN information
hh3cFCoEFIPSnoopingVNTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingVNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the virtual N_Port information on the local device."
::= { hh3cFCoEConfig 8 }
hh3cFCoEFIPSnoopingVNEntry OBJECT-TYPE
SYNTAX Hh3cFCoEFIPSnoopingVNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a virtual N_Port."
INDEX {
fcmInstanceIndex,
hh3cFCoEFIPSnoopingVNVLANIndex,
hh3cFCoEFIPSnoopingVNENodeIfIndex,
hh3cFCoEFIPSnoopingVNENodeMAC,
hh3cFCoEFIPSnoopingVNFCFMAC,
hh3cFCoEFIPSnoopingVNMAC
}
::= { hh3cFCoEFIPSnoopingVNTable 1 }
Hh3cFCoEFIPSnoopingVNEntry ::= SEQUENCE {
hh3cFCoEFIPSnoopingVNVLANIndex VlanIndex,
hh3cFCoEFIPSnoopingVNENodeIfIndex InterfaceIndex,
hh3cFCoEFIPSnoopingVNENodeMAC MacAddress,
hh3cFCoEFIPSnoopingVNFCFMAC MacAddress,
hh3cFCoEFIPSnoopingVNMAC MacAddress,
hh3cFCoEFIPSnoopingVNName Hh3cFcNameId,
hh3cFCoEFIPSnoopingVNFCFIfIndex InterfaceIndex
}
hh3cFCoEFIPSnoopingVNVLANIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the VLAN-ID through which a virtual N_Port
logs in to the FCF."
::= { hh3cFCoEFIPSnoopingVNEntry 1 }
hh3cFCoEFIPSnoopingVNENodeIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index uniquely identifies an Ethernet interface that connects
to the ENode."
::= { hh3cFCoEFIPSnoopingVNEntry 2 }
hh3cFCoEFIPSnoopingVNENodeMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the ENode."
::= { hh3cFCoEFIPSnoopingVNEntry 3 }
hh3cFCoEFIPSnoopingVNFCFMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the FCF."
::= { hh3cFCoEFIPSnoopingVNEntry 4 }
hh3cFCoEFIPSnoopingVNMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the virtual N_Port."
::= { hh3cFCoEFIPSnoopingVNEntry 5 }
hh3cFCoEFIPSnoopingVNName OBJECT-TYPE
SYNTAX Hh3cFcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name of the virtual N_Port."
::= { hh3cFCoEFIPSnoopingVNEntry 6 }
hh3cFCoEFIPSnoopingVNFCFIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index uniquely identifies an Ethernet interface that connects
to the FCF."
::= { hh3cFCoEFIPSnoopingVNEntry 7 }
-- FIP Snooping Config type of Ethernet
hh3cFCoEFIPSnoopingIfCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFCoEFIPSnoopingIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table is used to configure FIP Snooping working mode of the Ethernet
interface on the localdevice."
::= { hh3cFCoEConfig 9 }
hh3cFCoEFIPSnoopingIfCfgEntry OBJECT-TYPE
SYNTAX Hh3cFCoEFIPSnoopingIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about FIP Snooping working mode of the
Ethernet interface."
INDEX {
fcmInstanceIndex,
hh3cFCoEFIPSnoopingIfCfgIfIndex
}
::= { hh3cFCoEFIPSnoopingIfCfgTable 1 }
Hh3cFCoEFIPSnoopingIfCfgEntry ::= SEQUENCE {
hh3cFCoEFIPSnoopingIfCfgIfIndex InterfaceIndex,
hh3cFCoEFIPSnoopingIfCfgPortType INTEGER
}
hh3cFCoEFIPSnoopingIfCfgIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index uniquely identifies an Ethernet interface."
::= { hh3cFCoEFIPSnoopingIfCfgEntry 1 }
hh3cFCoEFIPSnoopingIfCfgPortType OBJECT-TYPE
SYNTAX INTEGER {
fcf(1),
enode(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FIP Snooping working mode of an Ethernet interface on the local
device. The FCF mode means that the Ethernet interface must connect
to an FCF. The ENode mode means that the Ethernet interface must
connect to an ENode."
::= { hh3cFCoEFIPSnoopingIfCfgEntry 2 }
END
Reference in New Issue Copy Permalink