mibs/MIBS/comware/HH3C-IPX-MIB

1412 lines
43 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Internetwork Packet Exchange MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 created by wanglu.
-- ============================================================================
HH3C-IPX-MIB DEFINITIONS ::= BEGIN
-- ==================================================================
--
-- Variables and types be imported
--
-- ==================================================================
IMPORTS
Integer32,MODULE-IDENTITY,OBJECT-TYPE,
TimeTicks,Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
hh3cCommon
FROM HH3C-OID-MIB;
-- ==================================================================
--
-- module identity part
--
-- ==================================================================
hh3cIpx MODULE-IDENTITY
LAST-UPDATED
"200412241036Z"
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"This MIB defines management information used on products
which support ipx protocol. It includes 4 parts:
1.ipx interface configuration group - This group
contains configurable management information and statistic
information on each interface.
2.rip group - Rip means route information protocol. This
group contains configurable management information and
route status and route statistic information.
3.sap group - Sap means service access group. This group
contains all service information.
4.ipx statistics group - This group includes ipx statistic
information on all interfaces."
::= { hh3cCommon 34 }
-- =============================================================
-- Textual Conventions
-- =============================================================
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
hh3cIpxConfig OBJECT IDENTIFIER ::= { hh3cIpx 1 }
hh3cIpxRip OBJECT IDENTIFIER ::= { hh3cIpx 2 }
hh3cIpxSap OBJECT IDENTIFIER ::= { hh3cIpx 3 }
hh3cIpxStat OBJECT IDENTIFIER ::= { hh3cIpx 4 }
-- hh3cIpxIfConfig contains configurable management information
-- on each interface.
hh3cIpxStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable ipx globally."
DEFVAL { disabled }
::= { hh3cIpxConfig 1 }
hh3cIpxIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of configurable management information on each
interface."
::= { hh3cIpxConfig 2 }
hh3cIpxIfConfigEntry OBJECT-TYPE
SYNTAX Hh3cIpxIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing management information
about a single interface."
INDEX { hh3cIpxIfIndex }
::= { hh3cIpxIfConfigTable 1 }
Hh3cIpxIfConfigEntry ::=
SEQUENCE {
hh3cIpxIfIndex Integer32,
hh3cIpxIfNetId OCTET STRING,
hh3cIpxIfNodeId OCTET STRING,
hh3cIpxIfSplitHorizon EnabledStatus,
hh3cIPxIfTick Integer32,
hh3cIpxIfUpdateChangeOnly EnabledStatus,
hh3cIpxIfRipMtu Integer32,
hh3cIpxIfEncapsuleType INTEGER,
hh3cIpxIfNetbiosPropagation EnabledStatus,
hh3cIpxIfSapStatus EnabledStatus,
hh3cIpxIfSapMtu Integer32,
hh3cIpxIfGnsReply EnabledStatus,
hh3cIpxIfRowStatus RowStatus
}
-- node definition
hh3cIpxIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the interface
to which the configurations are applied."
REFERENCE "ifIndex"
::= { hh3cIpxIfConfigEntry 1 }
hh3cIpxIfNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The network number of the IPX address of this
interface."
::= { hh3cIpxIfConfigEntry 2 }
hh3cIpxIfNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node number of the IPX address of this interface."
::= { hh3cIpxIfConfigEntry 3 }
hh3cIpxIfSplitHorizon OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to set the split horizon status.
Its default value is 'enabled'. In this case, the interface
which receives a message can't send this message from the
same interface. This function can avoid route loop. But it
is unused for point to point link. If it is set to
'disabled', split horizon is disable."
DEFVAL { enabled }
::= { hh3cIpxIfConfigEntry 4 }
hh3cIPxIfTick OBJECT-TYPE
SYNTAX Integer32(1..30000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set this interface's delay time.
It is counted by ticks which is 1/18 second. By default,
the ethernet interface's delay time is 1 tick,
asynchronous serial interface's delay time is 30 ticks,
WAN interface's delay time is 6 ticks."
::= { hh3cIpxIfConfigEntry 5 }
hh3cIpxIfUpdateChangeOnly OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this variable is set to 'enabled', updating change is
on. And sap and rip will send updating packets periodically
to avoid broadcast storm. Whereas updating change is
off."
DEFVAL { disabled }
::= { hh3cIpxIfConfigEntry 6 }
hh3cIpxIfRipMtu OBJECT-TYPE
SYNTAX Integer32(432..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to define the max length of RIP
updating packets."
DEFVAL { 432 }
::= { hh3cIpxIfConfigEntry 7 }
hh3cIpxIfEncapsuleType OBJECT-TYPE
SYNTAX INTEGER {
dot2(1),
dot3(2),
ethernet-2(3),
snap(4),
unkown(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to define the encapsulating form of
IPX packets. 'dot2' indicates the form is 802.2, while 'dot3'
means 802.3. And 'snap' indicates the form is ethernet-snap.
It takes effect only on ethernet interface, and the default
value is 'dot3', while 'unkown' for other types of port."
DEFVAL { dot3 }
::= { hh3cIpxIfConfigEntry 8 }
hh3cIpxIfNetbiosPropagation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to configure whether the current interface
can forward broadcasting packets which IPX type is 20 used
for NetBIOS."
DEFVAL { disabled }
::= { hh3cIpxIfConfigEntry 9 }
hh3cIpxIfSapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of sap on the current interface. It is enabled
when ipx is enabled on this interface."
DEFVAL { enabled }
::= { hh3cIpxIfConfigEntry 10 }
hh3cIpxIfSapMtu OBJECT-TYPE
SYNTAX Integer32(480..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to define the max length of SAP
refreshing packets."
DEFVAL { 480 }
::= { hh3cIpxIfConfigEntry 11 }
hh3cIpxIfGnsReply OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the current
interface to response the IPX GNS request."
DEFVAL { enabled }
::= { hh3cIpxIfConfigEntry 12 }
hh3cIpxIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select 'destory' and the row will be deleted."
::= { hh3cIpxIfConfigEntry 13 }
-- rip group
-- basic configurable management information
hh3cIpxRouteMultiplier OBJECT-TYPE
SYNTAX Integer32(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to calculate Rip aging time of route
information.
The absolute aging time =
(hh3cIpxRouteMultiplier * hh3cIpxRouteUpdateTimer)."
DEFVAL { 3 }
::= { hh3cIpxRip 1 }
hh3cIpxRouteUpdateTimer OBJECT-TYPE
SYNTAX Integer32(10..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to set rip updating time which is based
on seconds"
DEFVAL { 60 }
::= { hh3cIpxRip 2 }
hh3cIpxRouteImpRouteStatic OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether static route can be imported."
DEFVAL { disabled }
::= { hh3cIpxRip 3 }
hh3cIpxRouteLoadBalancePaths OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the max equivalent paths to the same
destination. If the newly defined value is smaller than the
current value, the routes out of the new value will be set
inactive."
DEFVAL { 1 }
::= { hh3cIpxRip 4 }
hh3cIpxRouteMaxResPaths OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the max dynamic routes to the same
destination. If the newly defined value is smaller than the
current value, the routes will not be deleted until they age
out or are deleted manually."
DEFVAL { 4 }
::= { hh3cIpxRip 5 }
-- hh3cIpxRouteTable contains all ipx route information of
-- this system. There are all kinds of information in this table
-- including direct, rip, inactive, active, etc.
hh3cIpxRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all dynamic and direct ipx route information
of this system. The information of this table is read only."
::= { hh3cIpxRip 6 }
hh3cIpxRouteEntry OBJECT-TYPE
SYNTAX Hh3cIpxRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry includes a dynamic or direct route."
INDEX { hh3cIpxRouteIndex }
::= { hh3cIpxRouteTable 1 }
Hh3cIpxRouteEntry ::=
SEQUENCE {
hh3cIpxRouteIndex
Integer32,
hh3cIpxRouteDestNetId
OCTET STRING,
hh3cIpxRouteNextHop
OCTET STRING,
hh3cIpxRoutePro
INTEGER,
hh3cIpxRoutePre
Integer32,
hh3cIpxRouteTicks
Integer32,
hh3cIpxRouteHops
Integer32,
hh3cIpxRouteTime
Integer32,
hh3cIpxRouteOutInterface
OCTET STRING
}
hh3cIpxRouteIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a route."
::= { hh3cIpxRouteEntry 1 }
hh3cIpxRouteDestNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination network number of this route information,
and its value ranges from 1 to 0xfffffffe."
::= { hh3cIpxRouteEntry 2 }
hh3cIpxRouteNextHop OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next hop of this route."
::= { hh3cIpxRouteEntry 3 }
hh3cIpxRoutePro OBJECT-TYPE
SYNTAX INTEGER{
direct(1),
rip(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol type of this route information."
::= { hh3cIpxRouteEntry 4 }
hh3cIpxRoutePre OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference of this route information. The direct route's
preference is 0, and it can't be modified. Dynamic route's
default preference is 100."
::= { hh3cIpxRouteEntry 5 }
hh3cIpxRouteTicks OBJECT-TYPE
SYNTAX Integer32(1..65534)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time, in ticks, that the packet takes to reach the destination."
::= { hh3cIpxRouteEntry 6 }
hh3cIpxRouteHops OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the number of hops that the packet must be
passed through to reach the destination."
::= { hh3cIpxRouteEntry 7 }
hh3cIpxRouteTime OBJECT-TYPE
SYNTAX Integer32(0..60000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aging time of this route information. The aging time of
static and interface route information is 0."
::= { hh3cIpxRouteEntry 8 }
hh3cIpxRouteOutInterface OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The out interface of this route information."
::= { hh3cIpxRouteEntry 9 }
-- hh3cIpxStaticRouteTable contains all static route
-- information
hh3cIpxStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all static ipx route information of
this system."
::= { hh3cIpxRip 7 }
hh3cIpxStaticRouteEntry OBJECT-TYPE
SYNTAX Hh3cIpxStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry includes one static route information."
INDEX { hh3cIpxStaticRouteDestNetId,
hh3cIpxStaticRouteNextHop }
::= { hh3cIpxStaticRouteTable 1 }
Hh3cIpxStaticRouteEntry ::=
SEQUENCE {
hh3cIpxStaticRouteDestNetId
OCTET STRING,
hh3cIpxStaticRouteNextHop
OCTET STRING,
hh3cIpxStaticRoutePre
Integer32,
hh3cIpxStaticRouteOutIf
OCTET STRING,
hh3cIpxStaticRouteTicks
Integer32,
hh3cIpxStaticRouteHops
Integer32,
hh3cIpxStaticRouteStatus
INTEGER,
hh3cIpxStaticRouteRowStatus
RowStatus
}
hh3cIpxStaticRouteDestNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Static Route Table. This object and
hh3cIpxStaticRouteNextHop uniquely identify a static route.
The destination network number of this static route
information,and its value ranges from 1 to 0xfffffffe.
Note that the broadcast network number is 0xffffffff
and is not allowed in IPX. The network number of
0xfffffffe would be considered to be the network
number of default route."
::= { hh3cIpxStaticRouteEntry 1 }
hh3cIpxStaticRouteNextHop OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sub-index of Static Route Table. The next hop of
this static route information."
::= { hh3cIpxStaticRouteEntry 2 }
hh3cIpxStaticRoutePre OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preference of this route information. Static route's
preference is 60, and it can be configured."
DEFVAL { 60 }
::= { hh3cIpxStaticRouteEntry 3 }
hh3cIpxStaticRouteOutIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..30))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The out interface of this route. This interface can be serial
or pos interface. "
::= { hh3cIpxStaticRouteEntry 4 }
hh3cIpxStaticRouteTicks OBJECT-TYPE
SYNTAX Integer32(1..65534)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time, in ticks that the packet takes to reach the destination
with the static route."
::= { hh3cIpxStaticRouteEntry 5 }
hh3cIpxStaticRouteHops OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates how many hops are needed to arrive
at the destination network."
DEFVAL { 1 }
::= { hh3cIpxStaticRouteEntry 6 }
hh3cIpxStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
inactive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this static route."
::= { hh3cIpxStaticRouteEntry 7 }
hh3cIpxStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select 'destory' and the row will be deleted."
::= { hh3cIpxStaticRouteEntry 8 }
-- hh3cIpxRouteStatTable includes statistic route information
hh3cIpxRouteStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxRouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table includes all statistic route information."
::= { hh3cIpxRip 8 }
hh3cIpxRouteStatEntry OBJECT-TYPE
SYNTAX Hh3cIpxRouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry records a statistic information of route."
INDEX { hh3cIpxRouteStatPro }
::= { hh3cIpxRouteStatTable 1 }
Hh3cIpxRouteStatEntry ::=
SEQUENCE {
hh3cIpxRouteStatPro
INTEGER,
hh3cIpxRouteStatRoutes
Counter32,
hh3cIpxRouteStatActives
Counter32,
hh3cIpxRouteStatAddeds
Counter32,
hh3cIpxRouteStatDeleteds
Counter32,
hh3cIpxRouteStatFreeds
Counter32
}
hh3cIpxRouteStatPro OBJECT-TYPE
SYNTAX INTEGER{
direct(1),
static(2),
rip(3),
default(4),
total(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol type of the route information. The value of
'total' is the total amount of all kinds of IPX routes."
::= { hh3cIpxRouteStatEntry 1 }
hh3cIpxRouteStatRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route amount of the corresponding protocol type."
::= { hh3cIpxRouteStatEntry 2 }
hh3cIpxRouteStatActives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active route amount of the corresponding protocol type."
::= { hh3cIpxRouteStatEntry 3 }
hh3cIpxRouteStatAddeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The added route amount of the corresponding protocol type."
::= { hh3cIpxRouteStatEntry 4 }
hh3cIpxRouteStatDeleteds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The deleted but not freed route amount of the corresponding
protocol type."
::= { hh3cIpxRouteStatEntry 5 }
hh3cIpxRouteStatFreeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The freed route amount of the corresponding protocol type."
::= { hh3cIpxRouteStatEntry 6 }
-- sap group
-- basic configurable management information
hh3cIpxSapMultiplier OBJECT-TYPE
SYNTAX Integer32(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to calculate aging time of service
information.
The absolute aging time =
(hh3cIpxSapMultiplier * hh3cIpxSapUpdateTimer)."
DEFVAL { 3 }
::= { hh3cIpxSap 1 }
hh3cIpxSapUpdateTimer OBJECT-TYPE
SYNTAX Integer32(10..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to set service packet updating time which
is based on seconds."
DEFVAL { 60 }
::= { hh3cIpxSap 2 }
hh3cIpxSapGnsLoadBalance OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set whether the system will reply to the
GNS request with the Round-Robin way. By default, the system will
response to the GNS request with the servers known to the device
in turn, preventing from the nearest server's over loading. With
value of disabled, in this way, the system will response to the
request with the nearest server(who has smallest hop in system's
service information table)."
DEFVAL { enabled }
::= { hh3cIpxSap 3 }
hh3cIpxSapMaxResServers OBJECT-TYPE
SYNTAX Integer32(1..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure maximum number of servers of a type.
If the newly defined value is smaller than the previous value, the
information out of the value will not be deleted. If the queue reaches
to the maximum number, no new information can be added."
DEFVAL { 2048 }
::= { hh3cIpxSap 4 }
-- hh3cIpxServiceTable contains the service information
hh3cIpxServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table inlcudes all dynamic service information.
The dynamic service information can be read only."
::= { hh3cIpxSap 5 }
hh3cIpxServiceEntry OBJECT-TYPE
SYNTAX Hh3cIpxServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One entry records one service"
INDEX { hh3cIpxServiceIndex }
::= { hh3cIpxServiceTable 1 }
Hh3cIpxServiceEntry ::=
SEQUENCE{
hh3cIpxServiceIndex
Integer32,
hh3cIpxServiceName
OCTET STRING,
hh3cIpxServiceType
OCTET STRING,
hh3cIpxServiceNetId
OCTET STRING,
hh3cIpxServiceNodeId
OCTET STRING,
hh3cIpxServiceSocketNo
OCTET STRING,
hh3cIpxServicePreference
Integer32,
hh3cIpxServiceHops
Integer32,
hh3cIpxServiceRecvIf
OCTET STRING
}
-- node definition
hh3cIpxServiceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a service information."
::= { hh3cIpxServiceEntry 1 }
hh3cIpxServiceName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the service."
::= { hh3cIpxServiceEntry 2 }
hh3cIpxServiceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service type."
::= { hh3cIpxServiceEntry 3 }
hh3cIpxServiceNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPX network number portion of the IPX address of the service."
::= { hh3cIpxServiceEntry 4 }
hh3cIpxServiceNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPX node number portion of the IPX address of the service."
::= { hh3cIpxServiceEntry 5 }
hh3cIpxServiceSocketNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The socket portion of the IPX address of the service"
::= { hh3cIpxServiceEntry 6 }
hh3cIpxServicePreference OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service preference of the service"
::= { hh3cIpxServiceEntry 7 }
hh3cIpxServiceHops OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hops from the device to the server."
::= { hh3cIpxServiceEntry 8 }
hh3cIpxServiceRecvIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface from which the service is receieved"
::= { hh3cIpxServiceEntry 9 }
-- hh3cIpxStaticServiceTable This table contains all static service information
hh3cIpxStaticServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxStaticServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table inlcudes all static service information.
This table supports to creation and deletione of a static service,
but not supports to modification"
::= { hh3cIpxSap 6 }
hh3cIpxStaticServiceEntry OBJECT-TYPE
SYNTAX Hh3cIpxStaticServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry records one service"
INDEX { hh3cIpxStaticServiceType,
hh3cIpxStaticServiceName,
hh3cIpxStaticServiceNetId }
::= { hh3cIpxStaticServiceTable 1 }
Hh3cIpxStaticServiceEntry ::=
SEQUENCE{
hh3cIpxStaticServiceType
OCTET STRING,
hh3cIpxStaticServiceName
OCTET STRING,
hh3cIpxStaticServiceNetId
OCTET STRING,
hh3cIpxStaticServiceNodeId
OCTET STRING,
hh3cIpxStatciServiceSocketNo
OCTET STRING,
hh3cIpxStaticServicePreference
Integer32,
hh3cIpxStaticServiceHops
Integer32,
hh3cIpxStaticServiceStatus
INTEGER,
hh3cIpxStaticServiceRowStatus
RowStatus
}
-- node definition
hh3cIpxStaticServiceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of static service table."
::= { hh3cIpxStaticServiceEntry 1 }
hh3cIpxStaticServiceName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..47))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sub-index of static service table. The name of
the service."
::= { hh3cIpxStaticServiceEntry 2 }
hh3cIpxStaticServiceNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sub-index of static service table. The IPX network
number portion of the IPX address of the service."
::= { hh3cIpxStaticServiceEntry 3 }
hh3cIpxStaticServiceNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The IPX node number portion of the IPX address of the
service."
::= { hh3cIpxStaticServiceEntry 4 }
hh3cIpxStatciServiceSocketNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The socket portion of the IPX address of the service."
::= { hh3cIpxStaticServiceEntry 5 }
hh3cIpxStaticServicePreference OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The service preference of the server."
DEFVAL { 60 }
::= { hh3cIpxStaticServiceEntry 6 }
hh3cIpxStaticServiceHops OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The hops from the device to the server."
::= { hh3cIpxStaticServiceEntry 7 }
hh3cIpxStaticServiceStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
inactive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the service that you created. The value of
this object is determined by system."
::= { hh3cIpxStaticServiceEntry 8 }
hh3cIpxStaticServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select 'destory' and the row will be deleted."
::= { hh3cIpxStaticServiceEntry 9 }
-- ipx statistics group
-- statistic information about packets Input/Output
hh3cIpxStatGlobal OBJECT IDENTIFIER ::= { hh3cIpxStat 1 }
hh3cIpxStatInterface OBJECT IDENTIFIER ::= { hh3cIpxStat 2 }
-- received
hh3cIpxStatTotalReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets received."
::= { hh3cIpxStatGlobal 1 }
hh3cIpxStatPitchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets filled by device when forwarding
or delivering up to upper protocol."
::= { hh3cIpxStatGlobal 2 }
hh3cIpxStatLenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets discarded due to length error."
::= { hh3cIpxStatGlobal 3 }
hh3cIpxStatFormatErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets discarded due to format error."
::= { hh3cIpxStatGlobal 4 }
hh3cIpxStatBadHops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets which's value of field Hops
is greater than 16."
::= { hh3cIpxStatGlobal 5 }
hh3cIpxStatHopsDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets of which hops portion
is equal to 16."
::= { hh3cIpxStatGlobal 6 }
hh3cIpxStatOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets discarded due to other error."
::= { hh3cIpxStatGlobal 7 }
hh3cIpxStatLocalDests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets which destination is the
local device. Note that this would include the IPX NetBIOS
propagation packets and those broadcast packets just to
the network on which local device resides."
::= { hh3cIpxStatGlobal 8 }
hh3cIpxStatCantDeals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets with which can't be dealt.
One possible reason for discarding such a packet would be
receiving a packet of an unknown or unsupported protocol."
::= { hh3cIpxStatGlobal 9 }
-- Sent
hh3cIpxStatForwards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets to be forwarded in the case that
the entity was not their final destination."
::= { hh3cIpxStatGlobal 10 }
hh3cIpxStatGenerates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of sent packets that the device generated itself."
::= { hh3cIpxStatGlobal 11 }
hh3cIpxStatNoRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets discarded due to no route to the
destination was found in routing table."
::= { hh3cIpxStatGlobal 12 }
hh3cIpxStatOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets to be discarded when sending out.
Note that this counter would not include the packet(s)
discarded due to no route."
::= { hh3cIpxStatGlobal 13 }
-- Rip
hh3cIpxStatRipSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets sent."
::= { hh3cIpxStatGlobal 14 }
hh3cIpxStatRipReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets received."
::= { hh3cIpxStatGlobal 15 }
hh3cIpxStaRipRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP response packets sent. "
::= { hh3cIpxStatGlobal 16 }
hh3cIpxStaRipRspReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP response packets received."
::= { hh3cIpxStatGlobal 17 }
hh3cIpxStatRipReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP request packets received."
::= { hh3cIpxStatGlobal 18 }
hh3cIpxStatRipReqDeals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP request packets dealt with."
::= { hh3cIpxStatGlobal 19 }
hh3cIpxStatRipReqSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP request packets sent."
::= { hh3cIpxStatGlobal 20}
hh3cIpxStatRipPeriUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of periodic update RIP packets sent."
::= { hh3cIpxStatGlobal 21 }
-- Sap
hh3cIpxStatSapGenReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP general request packets received."
::= { hh3cIpxStatGlobal 22 }
hh3cIpxStatSapSpecReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP specific request packets received."
::= { hh3cIpxStatGlobal 23 }
hh3cIpxStatSapGnsReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS request packets received."
::= { hh3cIpxStatGlobal 24 }
hh3cIpxStatSapGenRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP general response packets sent."
::= { hh3cIpxStatGlobal 25 }
hh3cIpxStatSapSpecRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP specific response packets sent."
::= { hh3cIpxStatGlobal 26 }
hh3cIpxStatSapGnsRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS response packets sent."
::= { hh3cIpxStatGlobal 27 }
hh3cIpxStatSapPeriUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP periodic update packets sent."
::= { hh3cIpxStatGlobal 28 }
hh3cIpxStatSapInPktErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP error packets received."
::= { hh3cIpxStatGlobal 29 }
-- hh3cIpxIfStatTable includes all statistic information
-- on each interface.
hh3cIpxIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIpxIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the statistic information on each interface."
::= { hh3cIpxStatInterface 1 }
hh3cIpxIfStatEntry OBJECT-TYPE
SYNTAX Hh3cIpxIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the statistic table."
INDEX { hh3cIpxIfStatIndex }
::= { hh3cIpxIfStatTable 1 }
Hh3cIpxIfStatEntry ::=
SEQUENCE{
hh3cIpxIfStatIndex
Integer32,
hh3cIpxIfStatNetId
OCTET STRING,
hh3cIpxIfStatNodeId
OCTET STRING,
--ipx
hh3cIpxIfStatIpxReceives
Counter32,
hh3cIpxIfStatIpxSends
Counter32,
hh3cIpxIfStatIpxRecvBytes
Counter32,
hh3cIpxIfStatIpxSendBytes
Counter32,
-- Rip
hh3cIpxIfStatRipReceives
Counter32,
hh3cIpxIfStatRipSends
Counter32,
hh3cIpxIfStatRipDiscards
Counter32,
hh3cIpxIfStatRipSpecReqReceives
Counter32,
hh3cIpxIfStatRipSpecRspSends
Counter32,
hh3cIpxIfStatRipGenReqReceives
Counter32,
hh3cIpxIfStatRipGenRspSends
Counter32,
-- Sap
hh3cIpxIfStatSapReceives
Counter32,
hh3cIpxIfStatSapSends
Counter32,
hh3cIpxIfStatSapDiscards
Counter32,
hh3cIpxIfStatSapGnsReqReceives
Counter32,
hh3cIpxIfStatSapGnsRspSends
Counter32
}
hh3cIpxIfStatIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the table's entry. According to the
interface's index."
REFERENCE "ifIndex"
::= { hh3cIpxIfStatEntry 1 }
hh3cIpxIfStatNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The network number of the IPX address of this interface."
::= { hh3cIpxIfStatEntry 2 }
hh3cIpxIfStatNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The node number of the IPX address of this interface."
::= { hh3cIpxIfStatEntry 3 }
-- IPX
hh3cIpxIfStatIpxReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets received on the interface."
::= { hh3cIpxIfStatEntry 4 }
hh3cIpxIfStatIpxSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets sent on the interface."
::= { hh3cIpxIfStatEntry 5 }
hh3cIpxIfStatIpxRecvBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of bytes received on the interface."
::= { hh3cIpxIfStatEntry 6 }
hh3cIpxIfStatIpxSendBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of bytes sent on the interface."
::= { hh3cIpxIfStatEntry 7 }
-- Rip
hh3cIpxIfStatRipReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets received on the interface."
::= { hh3cIpxIfStatEntry 8 }
hh3cIpxIfStatRipSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets sent on the interface."
::= { hh3cIpxIfStatEntry 9 }
hh3cIpxIfStatRipDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets discarded on the interface."
::= { hh3cIpxIfStatEntry 10 }
hh3cIpxIfStatRipSpecReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP specific request packets received
on the interface."
::= { hh3cIpxIfStatEntry 11 }
hh3cIpxIfStatRipSpecRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP specific response packets sent
on the interface."
::= { hh3cIpxIfStatEntry 12 }
hh3cIpxIfStatRipGenReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP general request packets received
on the interface."
::= { hh3cIpxIfStatEntry 13 }
hh3cIpxIfStatRipGenRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP general response packets sent
on the interface."
::= { hh3cIpxIfStatEntry 14 }
-- Sap
hh3cIpxIfStatSapReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP packets received on the interface."
::= { hh3cIpxIfStatEntry 15 }
hh3cIpxIfStatSapSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP packets sent on the interface."
::= { hh3cIpxIfStatEntry 16 }
hh3cIpxIfStatSapDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP packets discarded on the interface."
::= { hh3cIpxIfStatEntry 17 }
hh3cIpxIfStatSapGnsReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS response packets received
on the interface."
::= { hh3cIpxIfStatEntry 18 }
hh3cIpxIfStatSapGnsRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS response packets sent on
the interface."
::= { hh3cIpxIfStatEntry 19 }
END