mibs/MIBS/dell/FORCE10-BGP4-V2-MIB

4117 lines
109 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- draft-ietf-idr-bgp4-mibv2-05.txt
--
-- Copyright (c) 2005 The Internet Society.
-- Copyright (c) 2007 Force10 Networks, Inc.
--
-- All rights reserved.
-- *****************************************************************************
FORCE10-BGP4-V2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Gauge32, mib-2, Unsigned32, Integer32,
TimeTicks
FROM SNMPv2-SMI
InetAddressType, InetAddress, InetPortNumber,
InetAutonomousSystemNumber, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
TEXTUAL-CONVENTION, TruthValue, RowPointer, StorageType,
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
f10Experiment
FROM FORCE10-SMI;
f10BgpM2 MODULE-IDENTITY
LAST-UPDATED "200704271200Z" -- April 27, 2007 12:00:00 EDT
ORGANIZATION "IETF IDR Working Group"
CONTACT-INFO "E-mail: idr@merit.net
Jeffrey Haas (Editor)
825 Victors Way, Suite 100
Ann Arbor, MI 48108
Tel: +1 734 222-1600
Fax: +1 734 222-1602
E-mail: jhaas@nexthop.com"
DESCRIPTION
"This MIB module defines management objects for
the Border Gateway Protocol, Version 4."
REVISION "200704271200Z" -- April 27, 2007 12:00:00 EDT
DESCRIPTION
"This is a Force10 proprietary vesrion of the
draft-ietf-idr-bgp4-mibv2-05.txt MIB as proposed by
the IETF Inter-Domain Routing Working Group.
This mib will be obsolete when IANA-number is assigned.
The following objects are added by Force10.
- Added to BgpM2PeerCounterstable
f10BgpM2PeerInKeepalives,
f10BgpM2PeerOutKeepalives,
f10BgpM2PeerInOpen,
f10BgpM2PeerOutOpen,
f10BgpM2PeerInRteRefresh,
f10BgpM2PeerOutRteRefresh
- Added to BgpM2PrefixCountersTable
f10BgpM2PrefixWdrawnByPeer,
f10BgpM2PrefixWdrawnFromPeer"
-- ::= { mib-2 XXX }
::= { f10Experiment 1 }
F10BgpM2Identifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d."
STATUS current
DESCRIPTION
"The representation of a BGP Identifier. The BGP
Identifier should be represented in the OCTET STRING
as with the first OCTET of the string containing
the first OCTET of the BGP Identifier received or sent
in the OPEN packet and so on.
Even though the BGP Identifier is trending away from
an IP address it is still displayed as if it was one,
even when it would be an illegal IP address."
SYNTAX OCTET STRING(SIZE (4))
F10BgpM2Afi ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The representation of a BGP AFI"
SYNTAX Unsigned32(0..65535)
F10BgpM2Safi ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The representation of a BGP SAFI"
SYNTAX Unsigned32(0..255)
F10BgpM2Community ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d:"
STATUS current
DESCRIPTION
"The representation of a BGP Community."
SYNTAX OCTET STRING(SIZE(4))
F10BgpM2ExtendedCommunity ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"The representation of a BGP Extended Community."
SYNTAX OCTET STRING(SIZE(8))
f10BgpM2BaseScalars
OBJECT IDENTIFIER ::= { f10BgpM2 1 }
--
-- Notifications
--
f10BgpM2BaseNotifications
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 0 }
f10BgpM2Established NOTIFICATION-TYPE
OBJECTS {
f10BgpM2PeerLocalAddrType,
f10BgpM2PeerLocalAddr,
f10BgpM2PeerRemoteAddrType,
f10BgpM2PeerRemoteAddr,
f10BgpM2PeerLastErrorReceived,
f10BgpM2PeerState
}
STATUS current
DESCRIPTION
"The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state."
::= { f10BgpM2BaseNotifications 1 }
f10BgpM2BackwardTransition NOTIFICATION-TYPE
OBJECTS {
f10BgpM2PeerLocalAddrType,
f10BgpM2PeerLocalAddr,
f10BgpM2PeerRemoteAddrType,
f10BgpM2PeerRemoteAddr,
f10BgpM2PeerLastErrorReceived,
f10BgpM2PeerLastErrorReceivedText,
f10BgpM2PeerState
}
STATUS current
DESCRIPTION
"The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state."
::= { f10BgpM2BaseNotifications 2 }
--
-- BGP Supported Version Table
--
f10BgpM2Version
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 1 }
f10BgpM2VersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2VersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported BGP versions."
::= { f10BgpM2Version 1 }
f10BgpM2VersionEntry OBJECT-TYPE
SYNTAX F10BgpM2VersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a given supported version
of the Border Gateway Protocol and the level of
support provided. It is expected that any agent
implementation supporting this MIB module will
report support for Version 4 of the Border Gateway
Protocol at the very minimum."
INDEX {
f10BgpM2VersionIndex
}
::= { f10BgpM2VersionTable 1 }
F10BgpM2VersionEntry ::= SEQUENCE {
f10BgpM2VersionIndex
Unsigned32,
f10BgpM2VersionSupported
TruthValue
}
f10BgpM2VersionIndex OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the BGP Protocol."
::= { f10BgpM2VersionEntry 1 }
f10BgpM2VersionSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this version of the BGP protocol
identified in 'f10BgpM2VersionIndex' is supported. The absence
of a row for a particular f10BgpM2VersionIndex indicates that
that f10BgpM2VersionIndex protocol version number is not
supported."
::= { f10BgpM2VersionEntry 2 }
--
-- Supported BGP Capabilities
--
f10BgpM2SupportedCapabilities
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 2 }
f10BgpM2CapabilitySupportAvailable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if capability support is
available and is enabled."
::= { f10BgpM2SupportedCapabilities 1 }
f10BgpM2SupportedCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2SupportedCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported BGP-4 capabilities."
::= { f10BgpM2SupportedCapabilities 2 }
f10BgpM2SupportedCapabilitiesEntry OBJECT-TYPE
SYNTAX F10BgpM2SupportedCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about supported capabilities indexed
by capability number."
INDEX {
f10BgpM2SupportedCapabilityCode
}
::= { f10BgpM2SupportedCapabilitiesTable 1 }
F10BgpM2SupportedCapabilityEntry ::= SEQUENCE {
f10BgpM2SupportedCapabilityCode
Unsigned32,
f10BgpM2SupportedCapability
TruthValue
}
f10BgpM2SupportedCapabilityCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of supported capability. The index directly
corresponds with the BGP-4 Capability Advertisement
Capability Code."
::= { f10BgpM2SupportedCapabilitiesEntry 1 }
f10BgpM2SupportedCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is True if this capability is supported,
False otherwise."
::= { f10BgpM2SupportedCapabilitiesEntry 2 }
--
-- Base Scalars
--
f10BgpM2AsSize OBJECT-TYPE
SYNTAX INTEGER {
twoOctet(1),
fourOctet(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the AS value in this implementation.
The semantics of this are determined as per the
as-4bytes draft."
REFERENCE
"draft-ietf-idr-as4bytes-04"
::= { f10BgpM2BaseScalars 4 }
f10BgpM2LocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local autonomous system number.
If the f10BgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535."
::= { f10BgpM2BaseScalars 5 }
f10BgpM2LocalIdentifier OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier."
::= { f10BgpM2BaseScalars 6 }
--
-- Base Scalar Extensions
--
f10BgpM2BaseScalarExtensions
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 7 }
f10BgpM2BaseScalarNonCapExts
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarExtensions 1 }
f10BgpM2BaseScalarCapExts
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarExtensions 2 }
--
-- Base Scalar Route Reflection Extensions
--
f10BgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER ::=
{ f10BgpM2BaseScalarNonCapExts 2796 }
f10BgpM2RouteReflector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this implementation supports the
BGP Route Reflection Extension and is enabled as a
route reflector. If the BGP Route Reflection extension
is not supported this value must be FALSE."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2BaseScalarRouteReflectExts 1 }
f10BgpM2ClusterId OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's F10BgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2BaseScalarRouteReflectExts 2 }
--
-- Base Scalar AS Confederation Extensions
--
f10BgpM2BaseScalarASConfedExts OBJECT IDENTIFIER ::=
{ f10BgpM2BaseScalarNonCapExts 3065 }
f10BgpM2ConfederationRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this implementation supports the
BGP AS Confederations Extension and this router is
configured to be in a confederation."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { f10BgpM2BaseScalarASConfedExts 1 }
f10BgpM2ConfederationId OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { f10BgpM2BaseScalarASConfedExts 2 }
--
-- Base Configuration Objects
--
f10BgpM2BaseScalarConfiguration
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalars 8 }
f10BgpM2CfgBaseScalarStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the intended storage type for
all configurable base scalars."
::= { f10BgpM2BaseScalarConfiguration 1 }
f10BgpM2CfgLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local autonomous system number.
If the f10BgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535."
::= { f10BgpM2BaseScalarConfiguration 2 }
f10BgpM2CfgLocalIdentifier OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier."
::= { f10BgpM2BaseScalarConfiguration 3 }
--
-- Base Scalar Extensions
--
f10BgpM2CfgBaseScalarExtensions
OBJECT IDENTIFIER ::= { f10BgpM2BaseScalarConfiguration 4 }
f10BgpM2CfgBaseScalarNonCapExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarExtensions 1 }
f10BgpM2CfgBaseScalarCapExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarExtensions 2 }
--
-- Base Scalar Route Reflection Extensions
--
f10BgpM2CfgBaseScalarReflectorExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarNonCapExts 2796 }
f10BgpM2CfgRouteReflector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is set to true if this implementation will
be supporting route reflection."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2CfgBaseScalarReflectorExts 1 }
f10BgpM2CfgClusterId OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's F10BgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2CfgBaseScalarReflectorExts 2 }
--
-- Base Scalar AS Confederation Extensions
--
f10BgpM2CfgBaseScalarASConfedExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgBaseScalarNonCapExts 3065 }
f10BgpM2CfgConfederationRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is set to true if this implementation will be
supporting BGP AS Confederations."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { f10BgpM2CfgBaseScalarASConfedExts 1 }
f10BgpM2CfgConfederationId OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { f10BgpM2CfgBaseScalarASConfedExts 2 }
--
-- BGP Peer Data
--
f10BgpM2Peer
OBJECT IDENTIFIER ::= { f10BgpM2 2 }
f10BgpM2PeerData
OBJECT IDENTIFIER ::= { f10BgpM2Peer 1 }
f10BgpM2PeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table.
This table contains, one entry per remote BGP peer,
any information about the connections with the remote
BGP peers."
::= { f10BgpM2PeerData 1 }
f10BgpM2PeerEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the connection with
a remote BGP peer."
INDEX {
f10BgpM2PeerInstance,
f10BgpM2PeerLocalAddrType,
f10BgpM2PeerLocalAddr,
f10BgpM2PeerRemoteAddrType,
f10BgpM2PeerRemoteAddr
}
::= { f10BgpM2PeerTable 1 }
F10BgpM2PeerEntry ::= SEQUENCE {
f10BgpM2PeerInstance
Unsigned32,
f10BgpM2PeerIdentifier
F10BgpM2Identifier,
f10BgpM2PeerState
INTEGER,
f10BgpM2PeerStatus
INTEGER,
f10BgpM2PeerConfiguredVersion
Unsigned32,
f10BgpM2PeerNegotiatedVersion
Unsigned32,
f10BgpM2PeerLocalAddrType
InetAddressType,
f10BgpM2PeerLocalAddr
InetAddress,
f10BgpM2PeerLocalPort
InetPortNumber,
f10BgpM2PeerLocalAs
InetAutonomousSystemNumber,
f10BgpM2PeerRemoteAddrType
InetAddressType,
f10BgpM2PeerRemoteAddr
InetAddress,
f10BgpM2PeerRemotePort
InetPortNumber,
f10BgpM2PeerRemoteAs
InetAutonomousSystemNumber,
f10BgpM2PeerIndex
Unsigned32
}
f10BgpM2PeerInstance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing instance index.
Some BGP implementations permit the creation of
multiple instances of a BGP routing process. An
example includes RFC 2547 PE-CE routers.
Implementations that do not support multiple
routing instances should return 1 for this object.
XXX TODO - We need to provide a way to configure these
in the peer configuration table."
::= { f10BgpM2PeerEntry 1 }
f10BgpM2PeerIdentifier OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of this entry's remote BGP peer.
This entry should be 0.0.0.0 unless the f10BgpM2PeerState is
in the OpenConfirm or the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.2"
::= { f10BgpM2PeerEntry 2 }
f10BgpM2PeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote BGP peer's FSM state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 8"
::= { f10BgpM2PeerEntry 3 }
f10BgpM2PeerStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the BGP FSM for this remote peer is halted
or running. The BGP FSM for a remote peer is halted after
processing a Stop event. Likewise, it is in the running
state after a Start event.
The f10BgpM2PeerState will generally be in the idle state when
the FSM is halted, although some extensions such as
Graceful Restart will leave the peer in the Idle state
but with the FSM running."
::= { f10BgpM2PeerEntry 4 }
f10BgpM2PeerConfiguredVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured version to originally start with this
remote peer. The BGP speaker may permit negotiation to a
lower version number of the protocol."
::= { f10BgpM2PeerEntry 5 }
f10BgpM2PeerNegotiatedVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated version of BGP running between the two
peers."
::= { f10BgpM2PeerEntry 6 }
f10BgpM2PeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the local end of the peering
session."
::= { f10BgpM2PeerEntry 7 }
f10BgpM2PeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the local end of the peering session."
::= { f10BgpM2PeerEntry 8 }
f10BgpM2PeerLocalPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the BGP
peers."
::= { f10BgpM2PeerEntry 9 }
f10BgpM2PeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Some implementations of BGP can represent themselves
as multiple ASs. This is the AS that this peering
session is representing itself as to the remote peer."
::= { f10BgpM2PeerEntry 10 }
f10BgpM2PeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the remote end of the peering
session."
::= { f10BgpM2PeerEntry 11 }
f10BgpM2PeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote end of the peering session."
::= { f10BgpM2PeerEntry 12 }
f10BgpM2PeerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the BGP
peers. In the case of a transport for which the notion
of 'port' is irrelevant, an instance value of -1
should be returned by the agent for this object.
Note that the objects f10BgpM2PeerLocalAddr,
f10BgpM2PeerLocalPort, f10BgpM2PeerRemoteAddr and
f10BgpM2PeerRemotePort provide the appropriate reference to
the standard MIB TCP connection table. or even the ipv6
TCP MIB as in rfc2452."
REFERENCE
"RFC 2012 - SNMPv2 Management Information Base for the
Transmission Control Protocol using SMIv2.
RFC 2542 - IP Version 6 Management Information Base
for the Transmission Control Protocol."
::= { f10BgpM2PeerEntry 13 }
f10BgpM2PeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote autonomous system number."
::= { f10BgpM2PeerEntry 14 }
f10BgpM2PeerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the remote peer entry
in the f10BgpM2PeerTable. It is assigned by the agent
at the point of creation of the f10BgpM2PeerTable row
entry. While its value is guaranteed to be unique at
any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of f10BgpM2PeerIndex row instance values across rows of
the f10BgpM2PeerTable. It is used to provide an index
structure for other tables whose data is logically
per-peer.
For explicitly configured peers, this value will remain
consistent until this row is deleted by deleting the
configured peers. Unconfigured peers will generate
a monotonically increasing number when a BGP FSM is
built to process the peering session. Values in the
f10BgpM2PeerTable and other tables utilizing f10BgpM2PeerIndex
are expected to remain in existence for an arbitrary
time after the unconfigured peer has been deleted
in order to allow management applications to extract
useful management information for those peers. Thus,
an unconfigured peer using the same indices as the
f10BgpM2PeerTable that comes up while this row still
exists will re-utilize the same row."
::= { f10BgpM2PeerEntry 15 }
--
-- Errors
--
f10BgpM2PeerErrors
OBJECT IDENTIFIER ::= { f10BgpM2Peer 2 }
f10BgpM2PeerErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On a per peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer,
by its f10BgpM2PeerIndex, exists in this table, then no
such errors have been observed, reported, and
recorded on the session."
::= { f10BgpM2PeerErrors 1 }
f10BgpM2PeerErrorsEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about errors sent
and received for a particular BGP peer."
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerErrorsTable 1 }
F10BgpM2PeerErrorsEntry ::= SEQUENCE {
f10BgpM2PeerLastErrorReceived
OCTET STRING,
f10BgpM2PeerLastErrorSent
OCTET STRING,
f10BgpM2PeerLastErrorReceivedTime
TimeTicks,
f10BgpM2PeerLastErrorSentTime
TimeTicks,
f10BgpM2PeerLastErrorReceivedText
SnmpAdminString,
f10BgpM2PeerLastErrorSentText
SnmpAdminString,
f10BgpM2PeerLastErrorReceivedData
OCTET STRING,
f10BgpM2PeerLastErrorSentData
OCTET STRING
}
f10BgpM2PeerLastErrorReceived OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode received by this BGP
Speaker via a NOTIFICATION message for this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { f10BgpM2PeerErrorsEntry 1 }
f10BgpM2PeerLastErrorSent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode sent by this BGP
Speaker via a NOTIFICATION message to this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { f10BgpM2PeerErrorsEntry 2 }
f10BgpM2PeerLastErrorReceivedTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was received from
this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { f10BgpM2PeerErrorsEntry 3 }
f10BgpM2PeerLastErrorSentTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was sent to
this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { f10BgpM2PeerErrorsEntry 4 }
f10BgpM2PeerLastErrorReceivedText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that was reported."
::= { f10BgpM2PeerErrorsEntry 5 }
f10BgpM2PeerLastErrorSentText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that is being reported."
::= { f10BgpM2PeerErrorsEntry 6 }
f10BgpM2PeerLastErrorReceivedData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data seen by this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { f10BgpM2PeerErrorsEntry 7 }
f10BgpM2PeerLastErrorSentData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data sent to this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { f10BgpM2PeerErrorsEntry 8 }
--
-- Peer Event Times
--
f10BgpM2PeerTimers
OBJECT IDENTIFIER ::= { f10BgpM2Peer 3 }
f10BgpM2PeerEventTimesTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the Established state."
::= { f10BgpM2PeerTimers 1 }
f10BgpM2PeerEventTimesEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of statistics about time
spent and events encountered in the peer session
Established state."
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerEventTimesTable 1 }
F10BgpM2PeerEventTimesEntry ::= SEQUENCE {
f10BgpM2PeerFsmEstablishedTime
Gauge32,
f10BgpM2PeerInUpdatesElapsedTime
Gauge32
}
f10BgpM2PeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in seconds) this
peer has been in the Established state or how long
since this peer was last in the Established state.
It is set to zero when a new peer is configured or
the router is booted."
::= { f10BgpM2PeerEventTimesEntry 1 }
f10BgpM2PeerInUpdatesElapsedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since the last BGP UPDATE
message was received from the peer. Each time
f10BgpM2PeerInUpdates is incremented, the value of this
object is set to zero (0). This value shall also be
zero (0) when the peer is not in the Established state"
::= { f10BgpM2PeerEventTimesEntry 2 }
--
-- Peer Configured Timers
--
f10BgpM2PeerConfiguredTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per peer management data on BGP session timers."
::= { f10BgpM2PeerTimers 2 }
f10BgpM2PeerConfiguredTimersEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to the current state of
BGP timers on a given peering session."
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerConfiguredTimersTable 1 }
F10BgpM2PeerConfiguredTimersEntry ::= SEQUENCE {
f10BgpM2PeerConnectRetryInterval
Unsigned32,
f10BgpM2PeerHoldTimeConfigured
Unsigned32,
f10BgpM2PeerKeepAliveConfigured
Unsigned32,
f10BgpM2PeerMinASOrigInterval
Unsigned32,
f10BgpM2PeerMinRouteAdverInterval
Unsigned32
}
f10BgpM2PeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds."
::= { f10BgpM2PeerConfiguredTimersEntry 1 }
f10BgpM2PeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (f10BgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
::= { f10BgpM2PeerConfiguredTimersEntry 2 }
f10BgpM2PeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in f10BgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by f10BgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of f10BgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
::= { f10BgpM2PeerConfiguredTimersEntry 3 }
f10BgpM2PeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds."
::= { f10BgpM2PeerConfiguredTimersEntry 4 }
f10BgpM2PeerMinRouteAdverInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds."
::= { f10BgpM2PeerConfiguredTimersEntry 5 }
--
-- Peer Negotiated Timers
--
f10BgpM2PeerNegotiatedTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current values of per-peer timers which can be
dynamically set in the f10BgpM2PeerConfiguredTimersTable.
Values reflected in this table are the current
operational values, after negotiation from values
derived from initial configuration or last set from
f10BgpM2PeerConfiguredTimersTable row instances."
::= { f10BgpM2PeerTimers 3 }
f10BgpM2PeerNegotiatedTimersEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry reflects a value of the currently
operational, negotiated timers as reflected in the
F10BgpM2PeerNegotiatedTimersEntry."
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerNegotiatedTimersTable 1 }
F10BgpM2PeerNegotiatedTimersEntry ::= SEQUENCE {
f10BgpM2PeerHoldTime
Unsigned32,
f10BgpM2PeerKeepAlive
Unsigned32
}
f10BgpM2PeerHoldTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is calculated by this BGP
Speaker as being;
zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages are sent and the Hold Timer
is not set.
At least three (3). This value is the smaller of
the value sent by this peer in the OPEN message and
f10BgpM2PeerHoldTimeConfigured for this peer.
This value is only defined when the peering session is
in the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.2"
::= { f10BgpM2PeerNegotiatedTimersEntry 1 }
f10BgpM2PeerKeepAlive OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with f10BgpM2PeerHoldTime, it has the same
proportion as what f10BgpM2PeerKeepAliveConfigured has
when compared with f10BgpM2PeerHoldTimeConfigured. If
the value of this object is zero (0), it indicates
that the KeepAlive timer has not been established
with the peer, or, the value of
f10BgpM2PeerKeepAliveConfigured is zero (0).
This value is only defined when the peering session is
in the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17, Sec. 4.4"
::= { f10BgpM2PeerNegotiatedTimersEntry 2 }
--
-- Peer Capabilities
--
f10BgpM2PeerCapabilities
OBJECT IDENTIFIER ::= { f10BgpM2Peer 4 }
--
-- Announced Capabilities
--
f10BgpM2PeerCapsAnnouncedTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerCapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities
that are supported for a given peer."
::= { f10BgpM2PeerCapabilities 1 }
f10BgpM2PeerCapsAnnouncedEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerCapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code"
INDEX {
f10BgpM2PeerIndex,
f10BgpM2PeerCapAnnouncedCode,
f10BgpM2PeerCapAnnouncedIndex
}
::= { f10BgpM2PeerCapsAnnouncedTable 1 }
F10BgpM2PeerCapsAnnouncedEntry ::= SEQUENCE {
f10BgpM2PeerCapAnnouncedCode
Unsigned32,
f10BgpM2PeerCapAnnouncedIndex
Unsigned32,
f10BgpM2PeerCapAnnouncedValue
OCTET STRING
}
f10BgpM2PeerCapAnnouncedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
::= { f10BgpM2PeerCapsAnnouncedEntry 1 }
f10BgpM2PeerCapAnnouncedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them."
::= { f10BgpM2PeerCapsAnnouncedEntry 2 }
f10BgpM2PeerCapAnnouncedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability."
::= { f10BgpM2PeerCapsAnnouncedEntry 3 }
--
-- Received Capabilities
--
f10BgpM2PeerCapsReceivedTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM24PeerCapsReceivedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities
that are supported for a given peer."
::= { f10BgpM2PeerCapabilities 2 }
f10BgpM2PeerCapsReceivedEntry OBJECT-TYPE
SYNTAX F10BgpM24PeerCapsReceivedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code"
INDEX {
f10BgpM2PeerIndex,
f10BgpM2PeerCapReceivedCode,
f10BgpM2PeerCapReceivedIndex
}
::= { f10BgpM2PeerCapsReceivedTable 1 }
F10BgpM24PeerCapsReceivedEntry ::= SEQUENCE {
f10BgpM2PeerCapReceivedCode
Unsigned32,
f10BgpM2PeerCapReceivedIndex
Unsigned32,
f10BgpM2PeerCapReceivedValue
OCTET STRING
}
f10BgpM2PeerCapReceivedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
::= { f10BgpM2PeerCapsReceivedEntry 1 }
f10BgpM2PeerCapReceivedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them."
::= { f10BgpM2PeerCapsReceivedEntry 2 }
f10BgpM2PeerCapReceivedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability."
::= { f10BgpM2PeerCapsReceivedEntry 3 }
--
-- Per-peer counters
--
f10BgpM2PeerCounters
OBJECT IDENTIFIER ::= { f10BgpM2Peer 6 }
f10BgpM2PeerCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The counters associated with a BGP Peer."
::= { f10BgpM2PeerCounters 1 }
f10BgpM2PeerCountersEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session."
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerCountersTable 1 }
F10BgpM2PeerCountersEntry ::= SEQUENCE {
f10BgpM2PeerInUpdates
Counter32,
f10BgpM2PeerOutUpdates
Counter32,
f10BgpM2PeerInTotalMessages
Counter32,
f10BgpM2PeerOutTotalMessages
Counter32,
f10BgpM2PeerFsmEstablishedTrans
Counter32,
f10BgpM2PeerInKeepalives
Counter32,
f10BgpM2PeerOutKeepalives
Counter32,
f10BgpM2PeerInOpen
Counter32,
f10BgpM2PeerOutOpen
Counter32,
f10BgpM2PeerInRteRefresh
Counter32,
f10BgpM2PeerOutRteRefresh
Counter32
}
-- +++wayne need to describe what happens if connection is broken
-- and then reestablished. Does the prior counter value accumulate?
f10BgpM2PeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages received on this
connection. This object should be initialized to zero
(0) when the connection is established."
::= { f10BgpM2PeerCountersEntry 1 }
f10BgpM2PeerOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages transmitted on this
connection. This object should be initialized to zero
(0) when the connection is established."
::= { f10BgpM2PeerCountersEntry 2 }
f10BgpM2PeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received from the remote
peer on this connection. This object should be
initialized to zero when the connection is established."
::= { f10BgpM2PeerCountersEntry 3 }
f10BgpM2PeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages transmitted to the remote
peer on this connection. This object should be
initialized to zero when the connection is established."
::= { f10BgpM2PeerCountersEntry 4 }
f10BgpM2PeerFsmEstablishedTrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the BGP FSM
transitioned into the established state
for this peer."
::= { f10BgpM2PeerCountersEntry 5 }
f10BgpM2PeerInKeepalives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keepalive messages
received from a peer.Implemented by Force10."
::= { f10BgpM2PeerCountersEntry 6 }
f10BgpM2PeerOutKeepalives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keepalive messages sent
to a peer. Implemented by Force10."
::= { f10BgpM2PeerCountersEntry 7 }
f10BgpM2PeerInOpen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Open messages received
from a peer. Implemented by Force10."
::= { f10BgpM2PeerCountersEntry 8 }
f10BgpM2PeerOutOpen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Open messages sent to a peer.
Implemented by Force10."
::= { f10BgpM2PeerCountersEntry 9 }
f10BgpM2PeerInRteRefresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Route Refresh messages
received from a peer. Implemented by Force10."
::= { f10BgpM2PeerCountersEntry 10 }
f10BgpM2PeerOutRteRefresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Route Refresh messages sent
to a peer. Implemented by Force10."
::= { f10BgpM2PeerCountersEntry 11 }
--
-- Per-Peer Prefix Counters
--
f10BgpM2PrefixCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional per-peer, per AFI SAFI counters for prefixes"
::= { f10BgpM2PeerCounters 2 }
f10BgpM2PrefixCountersEntry OBJECT-TYPE
SYNTAX F10BgpM2PrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a bgp-peers prefix
counters."
INDEX {
f10BgpM2PeerIndex,
f10BgpM2PrefixCountersAfi,
f10BgpM2PrefixCountersSafi
}
::= { f10BgpM2PrefixCountersTable 1 }
F10BgpM2PrefixCountersEntry ::= SEQUENCE {
f10BgpM2PrefixCountersAfi
F10BgpM2Afi,
f10BgpM2PrefixCountersSafi
F10BgpM2Safi,
f10BgpM2PrefixInPrefixes
Gauge32,
f10BgpM2PrefixInPrefixesAccepted
Gauge32,
f10BgpM2PrefixInPrefixesRejected
Gauge32,
f10BgpM2PrefixOutPrefixes
Gauge32,
f10BgpM2PrefixWdrawnByPeer
Gauge32,
f10BgpM2PrefixWdrawnFromPeer
Gauge32
}
f10BgpM2PrefixCountersAfi OBJECT-TYPE
SYNTAX F10BgpM2Afi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AFI index of the per-peer, per prefix counters"
::= { f10BgpM2PrefixCountersEntry 1 }
f10BgpM2PrefixCountersSafi OBJECT-TYPE
SYNTAX F10BgpM2Safi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SAFI index of the per-peer, per prefix counters"
::= { f10BgpM2PrefixCountersEntry 2 }
f10BgpM2PrefixInPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer."
-- jmh - note that we are allowing stuff to be discarded
::= { f10BgpM2PrefixCountersEntry 7 }
f10BgpM2PrefixInPrefixesAccepted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib."
::= { f10BgpM2PrefixCountersEntry 8 }
f10BgpM2PrefixInPrefixesRejected OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are NOT eligible to become active
in the Loc-Rib."
::= { f10BgpM2PrefixCountersEntry 9 }
f10BgpM2PrefixOutPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in that peers Adj-Ribs-Out."
::= { f10BgpM2PrefixCountersEntry 10 }
f10BgpM2PrefixWdrawnByPeer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes withdrawn by a peer.
Implemened by Force10."
::= { f10BgpM2PrefixCountersEntry 11 }
f10BgpM2PrefixWdrawnFromPeer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes withdrawn from a peer.
Implemened by Force10."
::= { f10BgpM2PrefixCountersEntry 12 }
f10BgpM2PeerExtensions
OBJECT IDENTIFIER ::= { f10BgpM2Peer 7 }
f10BgpM2PeerNonCapExts
OBJECT IDENTIFIER ::= { f10BgpM2PeerExtensions 1 }
f10BgpM2PeerCapExts
OBJECT IDENTIFIER ::= { f10BgpM2PeerExtensions 2 }
--
-- Peer Route Reflection Extensions
--
f10BgpM2PeerRouteReflectionExts
OBJECT IDENTIFIER ::= { f10BgpM2PeerNonCapExts 2796 }
f10BgpM2PeerReflectorClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of route reflection client settings on a per-peer
basis."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2PeerRouteReflectionExts 1 }
f10BgpM2PeerReflectorClientEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client."
REFERENCE
"RFC 2796 - BGP Route Reflection"
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerReflectorClientTable 1 }
F10BgpM2PeerReflectorClientEntry ::= SEQUENCE {
f10BgpM2PeerReflectorClient
INTEGER
}
f10BgpM2PeerReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2PeerReflectorClientEntry 1 }
--
-- Peer AS Confederations Extensions
--
f10BgpM2PeerASConfederationExts
OBJECT IDENTIFIER ::= { f10BgpM2PeerNonCapExts 3065 }
f10BgpM2PeerConfedMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of confederation member settings on a per-peer
basis."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { f10BgpM2PeerASConfederationExts 1 }
f10BgpM2PeerConfedMemberEntry OBJECT-TYPE
SYNTAX F10BgpM2PeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member."
REFERENCE
"RFC 3065 - BGP Confederations"
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2PeerConfedMemberTable 1 }
F10BgpM2PeerConfedMemberEntry ::= SEQUENCE {
f10BgpM2PeerConfedMember
TruthValue
}
f10BgpM2PeerConfedMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether the given peer is in our
confederation or not."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { f10BgpM2PeerConfedMemberEntry 1 }
--
-- Peer configuration objects
--
f10BgpM2PeerConfiguration
OBJECT IDENTIFIER ::= { f10BgpM2Peer 8 }
--
-- Administering activated peering sessions
--
f10BgpM2CfgPeerAdminStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2CfgPeerAdminStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing rows for administratively starting and
stopping peering sessions."
::= { f10BgpM2PeerConfiguration 1 }
f10BgpM2CfgPeerAdminStatusEntry OBJECT-TYPE
SYNTAX F10BgpM2CfgPeerAdminStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing row for administratively starting and
stopping peers."
INDEX {
f10BgpM2PeerIndex
}
::= { f10BgpM2CfgPeerAdminStatusTable 1 }
F10BgpM2CfgPeerAdminStatusEntry ::= SEQUENCE {
f10BgpM2CfgPeerAdminStatus
INTEGER
}
f10BgpM2CfgPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
stop(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the Manual Stop and Manual Start
events to be sent to an activated peering session."
::= { f10BgpM2CfgPeerAdminStatusEntry 1 }
--
-- Peer Configuration
--
f10BgpM2CfgPeerNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
use as an index for creation of a row instance in
in the f10BgpM2CfgPeerTable. If the number of available
entries in the f10BgpM2CfgPeerTable is exhausted, a
retrieval value of this object instance will return
0. A value of 0 may also be returned if the agent
is otherwise incapable of f10BgpM2CfgPeerTable row creation
at the time of f10BgpM2CfgPeerNextIndex retrieval."
::= { f10BgpM2PeerConfiguration 2 }
f10BgpM2CfgPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2CfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP configuration peer table.
This table allows the configuration of the parameters
for a session with a BGP peer.
+++wayne provide description of how config should be done
for a peer per table."
::= { f10BgpM2PeerConfiguration 3 }
f10BgpM2CfgPeerEntry OBJECT-TYPE
SYNTAX F10BgpM2CfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information set up by a management
entity to configure a connection with a BGP peer."
INDEX { f10BgpM2CfgPeerIndex }
::= { f10BgpM2CfgPeerTable 1 }
F10BgpM2CfgPeerEntry ::= SEQUENCE {
f10BgpM2CfgPeerConfiguredVersion
Unsigned32,
f10BgpM2CfgAllowVersionNegotiation
TruthValue,
f10BgpM2CfgPeerLocalAddrType
InetAddressType,
f10BgpM2CfgPeerLocalAddr
InetAddress,
f10BgpM2CfgPeerLocalAs
InetAutonomousSystemNumber,
f10BgpM2CfgPeerRemoteAddrType
InetAddressType,
f10BgpM2CfgPeerRemoteAddr
InetAddress,
f10BgpM2CfgPeerRemoteAs
InetAutonomousSystemNumber,
f10BgpM2CfgPeerEntryStorageType
StorageType,
f10BgpM2CfgPeerError
INTEGER,
f10BgpM2CfgPeerBgpPeerEntry
RowPointer,
f10BgpM2CfgPeerRowEntryStatus
RowStatus,
f10BgpM2CfgPeerIndex
Integer32,
f10BgpM2CfgPeerStatus
INTEGER
}
f10BgpM2CfgPeerConfiguredVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured version to originally start with
this peer. The BGP speaker may permit negotiation
to a lower version number of the protocol depending on the
set value of f10BgpM2CfgAllowVersionNegotiation."
DEFVAL { 4 }
::= { f10BgpM2CfgPeerEntry 1 }
f10BgpM2CfgAllowVersionNegotiation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true, during session establishment with this
peer, negotiation to a version lower than that specified
in f10BgpM2CfgPeerConfiguredVersion will be allowed."
DEFVAL { false }
::= { f10BgpM2CfgPeerEntry 2 }
f10BgpM2CfgPeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address family of the speakers of this BGP
session."
::= { f10BgpM2CfgPeerEntry 3 }
f10BgpM2CfgPeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local end of the peering session."
::= { f10BgpM2CfgPeerEntry 4 }
f10BgpM2CfgPeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous system represented to peer on peering
session initialization. Some implementations of
BGP can represent themselves as multiple ASes.
These implementations can set this to an alternate
autonomous system. If this object is set to zero
(0) at the point this row instance is set to active,
then the implementation will initialize this session
representing itself as the value of f10BgpM2CfgLocalAs."
DEFVAL { 0 }
::= { f10BgpM2CfgPeerEntry 5 }
f10BgpM2CfgPeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address family of the speakers of the remote BGP
session."
::= { f10BgpM2CfgPeerEntry 6 }
f10BgpM2CfgPeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote end (destination address
of peer) for peering session."
::= { f10BgpM2CfgPeerEntry 7 }
f10BgpM2CfgPeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous system number of the remote peer."
::= { f10BgpM2CfgPeerEntry 8 }
f10BgpM2CfgPeerEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object type specifies the intended storage
type for the f10BgpM2CfgPeerEntry row instance."
::= { f10BgpM2CfgPeerEntry 9 }
f10BgpM2CfgPeerError OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
notActivated (1),
errDuplicatePeeringSession (2),
activated (3)
-- +++wayne more to follow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the current error status of
the row denoting the configured error status.
If this row is still under creation (has not been activated
f10BgpM2CfgPeerRowEntryStatus), then this instance will be set to
not-activated (1).
At the point that the row is activated, f10BgpM2CfgPeerError
will reflect the error status of the row data itself. If
there is another session already activated with the same
local and remote addresses as denoted by
{f10BgpM2CfgPeerLocalAddrType, f10BgpM2CfgPeerLocalAddr,
f10BgpM2CfgPeerRemoteAddr}, then
the value of this will be set to
err-duplicate-peering-session (2).
If this row is associated with a peer session whose
initialization has been attempted, the value will be
set to activated (3) (and, f10BgpM2PeerCfgPeerEntry will
be set to the row instance of the entry in the
f10BgpM2PeerTable which reflects the state of the peering
session).
Note that this object only reflects the error as a
function of the attempted activation of this row as
containing data for a bgp peering session. The actual
state of the session at the point of any protocol exchange
or session state machine initiation is reflected in the
f10BgpM2PeerTable row instance (as reflected through
f10BgpM2CfgPeerPeerEntry) associated with this row instance."
::= { f10BgpM2CfgPeerEntry 10 }
f10BgpM2CfgPeerBgpPeerEntry OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upon activation of the session data contained in this
row instance, this object points to an instance of a row
within the f10BgpM2PeerTable reflecting the session in its
initializing or operational state. Retrieval of this
column instance will always yield a value of {0.0} unless
the session has successfully been activated (via
f10BgpM2CfgPeerRowEntryStatus). Such row instances will always
have a value of f10BgpM2CfgPeerError which is activated (3)."
::= { f10BgpM2CfgPeerEntry 11 }
f10BgpM2CfgPeerRowEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object type is used to control creation,
activation, and deletion of this row instance."
-- +++wayne need better directions for agent auto-removal
-- of row instances which have moved to active or error
-- state
::= { f10BgpM2CfgPeerEntry 12 }
f10BgpM2CfgPeerIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Uniquely identifies an instance of a peer row, as
an element of configuration."
::= { f10BgpM2CfgPeerEntry 13 }
f10BgpM2CfgPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the state of the peering session upon
activation. If disabled, the FSM is in the halted
state and no Automatic Start events are generated.
If enabled, the FSM is in the running state and
Automatic Start events may be generated."
::= { f10BgpM2CfgPeerEntry 14 }
--
-- Per-peer timers table
--
f10BgpM2CfgPeerTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2CfgPeerTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of per-peer timers."
::= { f10BgpM2PeerConfiguration 4 }
f10BgpM2CfgPeerTimersEntry OBJECT-TYPE
SYNTAX F10BgpM2CfgPeerTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing per-peer timer configuration."
AUGMENTS {
f10BgpM2CfgPeerEntry
}
::= { f10BgpM2CfgPeerTimersTable 1 }
F10BgpM2CfgPeerTimersEntry ::= SEQUENCE {
f10BgpM2CfgPeerConnectRetryInterval
Unsigned32,
f10BgpM2CfgPeerHoldTimeConfigured
Unsigned32,
f10BgpM2CfgPeerKeepAliveConfigured
Unsigned32,
f10BgpM2CfgPeerMinASOrigInterval
Unsigned32,
f10BgpM2CfgPeerMinRouteAdverInter
Unsigned32
}
f10BgpM2CfgPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds."
DEFVAL {
120
}
::= { f10BgpM2CfgPeerTimersEntry 1 }
f10BgpM2CfgPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (f10BgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
DEFVAL {
90
}
::= { f10BgpM2CfgPeerTimersEntry 2 }
f10BgpM2CfgPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in f10BgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by f10BgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of f10BgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
DEFVAL {
30
}
::= { f10BgpM2CfgPeerTimersEntry 3 }
f10BgpM2CfgPeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds."
DEFVAL {
15
}
::= { f10BgpM2CfgPeerTimersEntry 4 }
f10BgpM2CfgPeerMinRouteAdverInter OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds."
DEFVAL {
30
}
::= { f10BgpM2CfgPeerTimersEntry 5 }
--
-- Per-peer configuration extensions
--
f10BgpM2CfgPeerExtensions
OBJECT IDENTIFIER ::= { f10BgpM2PeerConfiguration 5 }
f10BgpM2CfgPeerNonCapExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerExtensions 1 }
f10BgpM2CfgPeerCapExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerExtensions 2 }
--
-- Peer route reflection configuration
--
f10BgpM2CfgPeerRouteReflectionExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerNonCapExts 2796 }
f10BgpM2CfgPeerReflectorClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2CfgPeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of route reflection client settings on a per-peer
basis."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2CfgPeerRouteReflectionExts 1 }
f10BgpM2CfgPeerReflectorClientEntry OBJECT-TYPE
SYNTAX F10BgpM2CfgPeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client."
REFERENCE
"RFC 2796 - BGP Route Reflection"
AUGMENTS {
f10BgpM2CfgPeerEntry
}
::= { f10BgpM2CfgPeerReflectorClientTable 1 }
F10BgpM2CfgPeerReflectorClientEntry ::= SEQUENCE {
f10BgpM2CfgPeerReflectorClient
INTEGER
}
f10BgpM2CfgPeerReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2CfgPeerReflectorClientEntry 1 }
--
-- Peer AS Confederations Extensions
--
f10BgpM2CfgPeerASConfederationExts
OBJECT IDENTIFIER ::= { f10BgpM2CfgPeerNonCapExts 3065 }
f10BgpM2CfgPeerConfedMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2CfgPeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of confederation member settings on a per-peer
basis."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { f10BgpM2CfgPeerASConfederationExts 1 }
f10BgpM2CfgPeerConfedMemberEntry OBJECT-TYPE
SYNTAX F10BgpM2CfgPeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member."
REFERENCE
"RFC 3065 - BGP Confederations"
AUGMENTS {
f10BgpM2PeerEntry
}
::= { f10BgpM2CfgPeerConfedMemberTable 1 }
F10BgpM2CfgPeerConfedMemberEntry ::= SEQUENCE {
f10BgpM2CfgPeerConfedMember
TruthValue
}
f10BgpM2CfgPeerConfedMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether the given peer is in our
confederation or not."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { f10BgpM2CfgPeerConfedMemberEntry 1 }
--
-- BGP NLRI Data
--
f10BgpM2Rib
OBJECT IDENTIFIER ::= { f10BgpM2 3 }
--
-- NLRI Table
--
f10BgpM2NlriTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
f10BgpM2NlriBest is TRUE represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In."
::= { f10BgpM2Rib 1 }
f10BgpM2NlriEntry OBJECT-TYPE
SYNTAX F10BgpM2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network."
INDEX {
f10BgpM2PeerIndex,
f10BgpM2NlriAfi,
f10BgpM2NlriSafi,
f10BgpM2NlriPrefix,
f10BgpM2NlriPrefixLen,
f10BgpM2NlriIndex
}
::= { f10BgpM2NlriTable 1 }
F10BgpM2NlriEntry ::= SEQUENCE {
f10BgpM2NlriIndex
Unsigned32,
f10BgpM2NlriAfi
F10BgpM2Afi,
f10BgpM2NlriSafi
F10BgpM2Safi,
f10BgpM2NlriPrefixType
InetAddressType,
f10BgpM2NlriPrefix
InetAddress,
f10BgpM2NlriPrefixLen
InetAddressPrefixLength,
f10BgpM2NlriBest
TruthValue,
f10BgpM2NlriCalcLocalPref
Unsigned32,
f10BgpM2PathAttrIndex
Unsigned32,
f10BgpM2NlriOpaqueType
INTEGER,
f10BgpM2NlriOpaquePointer
RowPointer
}
f10BgpM2NlriIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index allows for multiple instances of a base
prefix for a certain AFI SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single route instance.
2. Allow for extensions which extend the NLRI field
to send the same prefix while utilizing other
extension specific information. An example of
this is RFC 3107 - Carrying MPLS labels in BGP."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4"
::= { f10BgpM2NlriEntry 1 }
f10BgpM2NlriAfi OBJECT-TYPE
SYNTAX F10BgpM2Afi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the prefix for this NLRI."
::= { f10BgpM2NlriEntry 2 }
f10BgpM2NlriSafi OBJECT-TYPE
SYNTAX F10BgpM2Safi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subsequent address family of the prefix for
this NLRI"
REFERENCE
"RFC 2858 - Multiprotocol Extensions for BGP-4"
::= { f10BgpM2NlriEntry 3 }
f10BgpM2NlriPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the IP address prefix in the
Network Layer Reachability Information field.
The value of this object is derived from the
appropriate value from the f10BgpM2NlriAfi field.
Where an appropriate InetAddressType is not
available, the value of the object must be
unknown(0).
XXX TODO - This seems like a hack."
::= { f10BgpM2NlriEntry 4 }
f10BgpM2NlriPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
f10BgpM2PathAttrAddrPrefixLen.
Any bits beyond the length specified by
f10BgpM2PathAttrAddrPrefixLen are zeroed."
::= { f10BgpM2NlriEntry 5 }
f10BgpM2NlriPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Length in bits of the address prefix in
the Network Layer Reachability Information field."
::= { f10BgpM2NlriEntry 6 }
f10BgpM2NlriBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route."
::= { f10BgpM2NlriEntry 7 }
f10BgpM2NlriCalcLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route."
::= { f10BgpM2NlriEntry 8 }
f10BgpM2PathAttrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the per-NLRI entry
in the f10BgpM2PathAttrTable. It is assigned by the
agent at the point of creation of the f10BgpM2PathAttrTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of f10BgpM2PathAttrIndex row instance values across rows
of the f10BgpM2PeerAttrTable. It is used to provide an
index structure for other tables whose data is logically
per-peer, per-NLRI."
::= { f10BgpM2NlriEntry 9 }
f10BgpM2NlriOpaqueType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
bgpMplsLabelStack(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object enumerates the type of the row that is
pointed to in the table row f10BgpM2NlriOpaquePointer
instance, if f10BgpM2NlriOpaquePointer is in fact not
a zero length. f10BgpM2NlriOpaqueType is necessary since
the data referenced by f10BgpM2NlriOpaquePointer is
opaque to BGP. For example, in the case of RFC 3107,
the label stack that is pointed to may occur in the
mplsLabelStackTable from the MPLS-LSR-MIB, and the
instance value of f10BgpM2NlriOpaqueType would be
bgpMplsLabelStack(1)."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4
draft-ietf-mpls-lsr-mib-08.txt"
::= { f10BgpM2NlriEntry 10 }
f10BgpM2NlriOpaquePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to a row that decomposes the data that is
opaque to the BGP MIB but is sent in the NLRI.
This RowPointer has zero (0) length data instance
if f10BgpM2NlriOpaqueType is none."
::= { f10BgpM2NlriEntry 11 }
--
-- Adj-Ribs-Out Table
--
f10BgpM2AdjRibsOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains on a per-peer basis one or more
routes from the f10BgpM2NlriTable that have been
placed in this peer's Adj-Ribs-Out."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 3.2"
::= { f10BgpM2Rib 2 }
f10BgpM2AdjRibsOutEntry OBJECT-TYPE
SYNTAX F10BgpM2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of BGP routes that have been placed into a
peer's Adj-Ribs-Out."
INDEX {
f10BgpM2PeerIndex,
f10BgpM2NlriAfi,
f10BgpM2NlriSafi,
f10BgpM2NlriPrefix,
f10BgpM2NlriPrefixLen,
f10BgpM2AdjRibsOutIndex
}
::= { f10BgpM2AdjRibsOutTable 1 }
F10BgpM2AdjRibsOutEntry ::= SEQUENCE {
f10BgpM2AdjRibsOutIndex
Unsigned32,
f10BgpM2AdjRibsOutRoute
RowPointer
}
f10BgpM2AdjRibsOutIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Certain extensions to BGP permit multiple instance of
a per afi, per safi prefix to be advertised to a peer.
This object allows the enumeration of them."
::= { f10BgpM2AdjRibsOutEntry 1 }
f10BgpM2AdjRibsOutRoute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object points to the route in the f10BgpM2NlriTable
that corresponds to the entry in the peer's
Adj-Rib-Out. Outgoing route maps are not
reflected at this point as those are part of the
Update-Send process."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.2"
::= { f10BgpM2AdjRibsOutEntry 2 }
--
-- BGP Rib Path Attributes Table
--
--
-- Path Attribute Counter
--
f10BgpM2PathAttrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the f10BgpM2PathAttrTable."
::= { f10BgpM2Rib 3 }
--
-- Path Attributes Table
--
f10BgpM2PathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides per advertised network-prefix attribute data,
as advertised over a peering session."
::= { f10BgpM2Rib 4 }
f10BgpM2PathAttrEntry OBJECT-TYPE
SYNTAX F10BgpM2PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains data about a given network
prefix, per-prefix and per-advertising peer."
INDEX {
f10BgpM2PathAttrIndex
}
::= { f10BgpM2PathAttrTable 1 }
F10BgpM2PathAttrEntry ::= SEQUENCE {
f10BgpM2PathAttrOrigin
INTEGER,
f10BgpM2PathAttrNextHopAddrType
InetAddressType,
f10BgpM2PathAttrNextHop
InetAddress,
f10BgpM2PathAttrMedPresent
TruthValue,
f10BgpM2PathAttrMed
Unsigned32,
f10BgpM2PathAttrLocalPrefPresent
TruthValue,
f10BgpM2PathAttrLocalPref
Unsigned32,
f10BgpM2PathAttrAtomicAggregate
INTEGER,
f10BgpM2PathAttrAggregatorAS
InetAutonomousSystemNumber,
f10BgpM2PathAttrAggregatorAddr
F10BgpM2Identifier,
f10BgpM2AsPathCalcLength
Unsigned32,
f10BgpM2AsPathString
SnmpAdminString,
f10BgpM2AsPathIndex
Unsigned32
}
f10BgpM2PathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via the EGP protocol
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the path information."
::= { f10BgpM2PathAttrEntry 1 }
f10BgpM2PathAttrNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the address for
the border router that should be used
to access the destination network."
::= { f10BgpM2PathAttrEntry 2 }
f10BgpM2PathAttrNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet.
The address family of this object will be the
same as that of the prefix in this row.
Note that for RFC2545 style double nexthops,
this object will always contain the global scope
nexthop. f10BgpM2LinkLocalNextHopTable will contain
the linklocal scope nexthop.
In the case that the mechanism documented in
draft-kato-bgp-ipv6-link-local-00.txt is used and
only a link local nexthop has been sent, ,
f10BgpM2LinkLocalNextHopPresent will be false
and f10BgpM2PathAttrNextHop will contain the link local
nexthop."
::= { f10BgpM2PathAttrEntry 3 }
f10BgpM2PathAttrMedPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the MED value is present.
If it is not present, the f10BgpM2PathAttrMed
object has no useful value and should be set to 0."
::= { f10BgpM2PathAttrEntry 4 }
f10BgpM2PathAttrMed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system."
::= { f10BgpM2PathAttrEntry 5 }
f10BgpM2PathAttrLocalPrefPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the LocalPref value is present.
If it is not present, the f10BgpM2PathAttrLocalPref
object has no useful value and should be set to 0."
::= { f10BgpM2PathAttrEntry 6 }
f10BgpM2PathAttrLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speakers degree of
preference for an advertised route."
::= { f10BgpM2PathAttrEntry 7 }
f10BgpM2PathAttrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER {
atomicAggregatePresent(1),
atomicAggregateMissing(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When this object is set to atomicAggregatePresent,
the ATOMIC_AGGREGATE Path Attribute is present
and indicates that the NLRI MUST NOT be made
more specific."
::= { f10BgpM2PathAttrEntry 8 }
f10BgpM2PathAttrAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet."
::= { f10BgpM2PathAttrEntry 9 }
f10BgpM2PathAttrAggregatorAddr OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker
that performed route aggregation. A
value of 0.0.0.0 indicates the absence
of this attribute."
::= { f10BgpM2PathAttrEntry 10 }
f10BgpM2AsPathCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
AS Path according to the rules of the BGP specification.
This value is used in route selection."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a"
::= { f10BgpM2PathAttrEntry 11 }
f10BgpM2AsPathString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability."
::= { f10BgpM2PathAttrEntry 12 }
f10BgpM2AsPathIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the decomposed AS Path
in the f10BgpM2AsPathTable. It is assigned by the
agent at the point of creation of the f10BgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of f10BgpM2AsPathIndex row instance values across rows
of the f10BgpM2AsPathTable."
::= { f10BgpM2PathAttrEntry 13 }
--
-- As-4 byte AS_PATH
--
f10BgpM2AsPath4byteTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2AsPath4byteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is present for BGP speakers that support
the AS 4byte specification and are functioning as
a router between 2-byte and 4-byte AS space."
REFERENCE
"draft-ietf-idr-as4bytes-04.txt - BGP support for
four-octet AS number space"
::= { f10BgpM2Rib 5 }
f10BgpM2AsPath4byteEntry OBJECT-TYPE
SYNTAX F10BgpM2AsPath4byteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the information for the AS 4-byte
extension's NEW_AS_PATH and NEW_AGGREGATOR attributes."
AUGMENTS {
f10BgpM2PathAttrEntry
}
::= { f10BgpM2AsPath4byteTable 1 }
F10BgpM2AsPath4byteEntry ::= SEQUENCE {
f10BgpM2AsPath4bytePathPresent
TruthValue,
f10BgpM2AsPath4byteAggregatorAS
InetAutonomousSystemNumber,
f10BgpM2AsPath4byteCalcLength
Unsigned32,
f10BgpM2AsPath4byteString
SnmpAdminString,
f10BgpM2AsPath4byteIndex
Unsigned32
}
f10BgpM2AsPath4bytePathPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value may only be true if this BGP Speaker
is functioning as a router between ASs that
are in 2-byte and 4-byte AS space. If this
value is true, then the NEW_AS_PATH attributes
are present and the 4-byte versions of the
appropriate path attributes are in this row.
If this value is false, then the following values
will be present in the row:
f10BgpM2PathAttrAggregatorAS - zero (0).
f10BgpM2AsPathCalcLength - zero (0).
f10BgpM2AsPathString - zero (0) length string.
f10BgpM2AsPathIndex - zero (0)."
::= { f10BgpM2AsPath4byteEntry 1 }
f10BgpM2AsPath4byteAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NEW_AGGREGATOR AS number of the last BGP4 speaker
that performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet."
::= { f10BgpM2AsPath4byteEntry 2 }
f10BgpM2AsPath4byteCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
NEW_AS_PATH according to the rules of the BGP specification.
This value is used in route selection."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a"
::= { f10BgpM2AsPath4byteEntry 3 }
f10BgpM2AsPath4byteString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability."
::= { f10BgpM2AsPath4byteEntry 4 }
f10BgpM2AsPath4byteIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the decomposed AS Path
in the f10BgpM2AsPathTable. It is assigned by the
agent at the point of creation of the f10BgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of f10BgpM2AsPathIndex row instance values across rows
of the f10BgpM2AsPathTable. "
::= { f10BgpM2AsPath4byteEntry 5 }
-- BGP 4 Path attribute AS Path Table. There is one row in
-- this table for each AS which is advertised for a given
-- route as provided from a peer.
-- JMH
-- We need one of these for the NewAsPath for the 4byte draft
f10BgpM2AsPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2AsPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute AS Path Table
contains the per network path (NLRI)
AS PATH data received from the
advertising BGP peer."
::= { f10BgpM2Rib 6 }
f10BgpM2AsPathTableEntry OBJECT-TYPE
SYNTAX F10BgpM2AsPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an AS path provided with a path to
a network."
INDEX {
f10BgpM2PathAttrIndex,
f10BgpM2AsPathSegmentIndex,
f10BgpM2AsPathElementIndex
}
::= { f10BgpM2AsPathTable 1 }
F10BgpM2AsPathEntry ::= SEQUENCE {
f10BgpM2AsPathSegmentIndex
Unsigned32,
f10BgpM2AsPathElementIndex
Unsigned32,
f10BgpM2AsPathType
INTEGER,
f10BgpM2AsPathElementValue
InetAutonomousSystemNumber
}
f10BgpM2AsPathSegmentIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A per-AS path segment index. This will index a set of
autonomous systems in an AS path which are part
of the same sequence or set (as determined by
the row value of f10BgpM2AsPathType, which
should be the same value for each f10BgpM2AsPathTable
entry indexed by the same (f10BgpM2PathAttrIndex,
f10BgpM2AsPathIndex) pair)."
::= { f10BgpM2AsPathTableEntry 1 }
f10BgpM2AsPathElementIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A per-AS element index. This will index a particular
AS within a sequence or set of autonomous systems in
an AS path."
::= { f10BgpM2AsPathTableEntry 2 }
f10BgpM2AsPathType OBJECT-TYPE
SYNTAX INTEGER {
asSet(1),
asSequence(2),
confedSequence(3),
confedSet(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of sequence in which this asPath
was advertised as an attribute. Note that
all asPath row instances for a given (f10BgpM2PathAttrIndex,
f10BgpM2AsPathIndex) index pair will have their
f10BgpM2AsPathType set to the same value.
The values for f10BgpM2AsPathType are
interpreted as defined in the base BGP document
and the BGP AS Confederations document."
REFERENCE
"draft-ietf-idr-bgp4-16
RFC 3065 - BGP AS Confederations"
::= { f10BgpM2AsPathTableEntry 3 }
f10BgpM2AsPathElementValue OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An AS value for an AS the related NLRI traversed
in the propagation of its advertisement. This
value is to be interpreted in the context of the
sequence implied by f10BgpM2AsPathIndex and
f10BgpM2AsPathType (and, in sequence of the
other table rows with the same value of
f10BgpM2PathAttrIndex and f10BgpM2AsPathIndex)."
::= { f10BgpM2AsPathTableEntry 4 }
-- BGP 4 Path unknown attribute. There is one row in
-- this table for each attribute not known by this BGP
-- implementation (or agent instrumentation), but provided
-- from a peer.
f10BgpM2PathAttrUnknownTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PathAttrUnknownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Unknown Table
contains the per network path (NLRI)
data on the path attributes advertised
with a route but not known to the local BGP implementation
or not otherwise capable of being returned from this agent.
The absence of row data for a given index value for
f10BgpM2PathAttrIndex indicates a lack of such unknown
attribute information for the indicated network path
(as indexed by that f10BgpM2PathAttrIndex value in the
f10BgpM2PathAttrTable)."
::= { f10BgpM2Rib 7 }
f10BgpM2PathAttrUnknownEntry OBJECT-TYPE
SYNTAX F10BgpM2PathAttrUnknownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an unknown attribute
provided with a path to a network."
INDEX {
f10BgpM2PathAttrIndex,
f10BgpM2PathAttrUnknownIndex
}
::= { f10BgpM2PathAttrUnknownTable 1 }
F10BgpM2PathAttrUnknownEntry ::= SEQUENCE {
f10BgpM2PathAttrUnknownIndex
Unsigned32,
f10BgpM2PathAttrUnknownType
Unsigned32,
f10BgpM2PathAttrUnknownValue
OCTET STRING
}
f10BgpM2PathAttrUnknownIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index for a row in this table."
::= { f10BgpM2PathAttrUnknownEntry 1 }
f10BgpM2PathAttrUnknownType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute type advertised with this unknown
attribute by the peer."
::= { f10BgpM2PathAttrUnknownEntry 2 }
-- Maximum size of the following is derived as
-- 4096 max message size
-- - 16 BGP message marker bytes
-- - 2 BGP message size
-- - 1 BGP message type (UPDATE with unknown attr)
-- - 2 UPDATE routes length (even assuming no routes)
-- - 2 UPDATE path attributes length
-- - 1 path attribute flag octet
-- - 2 unknown path attr type (in f10BgpM2PathAttrUnknownType)
-- ---------
-- 4070 bytes maximum per-message attribute value data
f10BgpM2PathAttrUnknownValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4070))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of path attribute not understood
by the base BGP-4 document.
Octets beyond the maximum size, if any,
are not recorded by this row object. "
::= { f10BgpM2PathAttrUnknownEntry 3 }
--
-- Path Attribute Extensions
--
f10BgpM2PathAttrExtensions
OBJECT IDENTIFIER ::= { f10BgpM2Rib 8 }
f10BgpM2PathAttrNonCapExts
OBJECT IDENTIFIER ::= { f10BgpM2PathAttrExtensions 1 }
f10BgpM2PathAttrCapExts
OBJECT IDENTIFIER ::= { f10BgpM2PathAttrExtensions 2 }
--
-- Path Attribute Route Reflection Extensions
--
--
-- Originator ID Table
--
f10BgpM2PathAttrRouteReflectionExts
OBJECT IDENTIFIER ::= { f10BgpM2PathAttrNonCapExts 2796 }
f10BgpM2PathAttrOriginatorIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PathAttrOriginatorIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per prefix data pertinent to advertisement of a
network prefix through an originator."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { f10BgpM2PathAttrRouteReflectionExts 1 }
f10BgpM2PathAttrOriginatorIdEntry OBJECT-TYPE
SYNTAX F10BgpM2PathAttrOriginatorIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains data pertinent to a network
prefix as received through its originating BGP
route reflector."
REFERENCE
"RFC 2796 - BGP Route Reflection"
INDEX {
f10BgpM2PathAttrIndex
}
::= { f10BgpM2PathAttrOriginatorIdTable 1 }
F10BgpM2PathAttrOriginatorIdEntry ::= SEQUENCE {
f10BgpM2PathAttrOriginatorId
F10BgpM2Identifier
}
f10BgpM2PathAttrOriginatorId OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Originator-ID identifying the router that initially
advertised this destination to a Route Reflector. A
value of 0.0.0.0 indicates the absence of this attribute."
REFERENCE
"This attribute is defined in [RFC2796]."
::= { f10BgpM2PathAttrOriginatorIdEntry 1 }
--
-- Cluster table
--
f10BgpM2PathAttrClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PathAttrClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Cluster Table
contains the per network path (NLRI)
data on the reflection path which a
route has traversed. The absence of row
data for a given index value for f10BgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable)."
::= { f10BgpM2PathAttrRouteReflectionExts 2 }
f10BgpM2PathAttrClusterEntry OBJECT-TYPE
SYNTAX F10BgpM2PathAttrClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a cluster traversal
provided with a path to a network."
INDEX {
f10BgpM2PathAttrIndex,
f10BgpM2PathAttrClusterIndex
}
::= { f10BgpM2PathAttrClusterTable 1 }
F10BgpM2PathAttrClusterEntry ::= SEQUENCE {
f10BgpM2PathAttrClusterIndex
Unsigned32,
f10BgpM2PathAttrClusterValue
F10BgpM2Identifier
}
f10BgpM2PathAttrClusterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integral index for a row in this table."
::= { f10BgpM2PathAttrClusterEntry 1 }
f10BgpM2PathAttrClusterValue OBJECT-TYPE
SYNTAX F10BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A four octet long value representing a part of the
reflection path that the route has passed. Each such four
octet long value represents the ID of a cluster that
the route has traversed. The sequence of this path as
received in the route advertisement will be preserved in
the sequence of f10BgpM2PathAttrClusterTable rows (and the
f10BgpM2PathAttrClusterValues in each row) as returned for
a given f10BgpM2PathAttrIndex value, and the monotonically
increasing sequence of f10BgpM2PathAttrClusterIndex values
for that f10BgpM2PathAttrIndex."
REFERENCE
"This attribute is defined in [RFC2796]."
::= { f10BgpM2PathAttrClusterEntry 2 }
--
-- BGP Communities
--
f10BgpM2PathAttrCommunityExts
OBJECT IDENTIFIER ::= { f10BgpM2PathAttrNonCapExts 1997 }
f10BgpM2PathAttrCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PathAttrCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the community membership advertised
with a route. The absence of row
data for a given index value for f10BgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable)."
::= { f10BgpM2PathAttrCommunityExts 1 }
f10BgpM2PathAttrCommEntry OBJECT-TYPE
SYNTAX F10BgpM2PathAttrCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a community association
provided with a path to a network."
INDEX {
f10BgpM2PathAttrIndex,
f10BgpM2PathAttrCommIndex
}
::= { f10BgpM2PathAttrCommTable 1 }
F10BgpM2PathAttrCommEntry ::= SEQUENCE {
f10BgpM2PathAttrCommIndex
Unsigned32,
f10BgpM2PathAttrCommValue
F10BgpM2Community
}
f10BgpM2PathAttrCommIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index for a row in this table."
::= { f10BgpM2PathAttrCommEntry 1 }
f10BgpM2PathAttrCommValue OBJECT-TYPE
SYNTAX F10BgpM2Community
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value representing a community. There are certain
4-octet long values which could be returned in this
columnar row data that carry additional semantics."
REFERENCE
"RFC 1997 - BGP Communities Attribute"
::= { f10BgpM2PathAttrCommEntry 2 }
--
-- BGP Extended Communities
--
f10BgpM2PathAttrExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2PathAttrExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the extended community membership advertised
with a route. The absence of row
data for a given index value for f10BgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
XXX JMH - can not assign the OID until an RFC is published."
::= { f10BgpM2PathAttrNonCapExts 3501 } -- FORCE10
f10BgpM2PathAttrExtCommEntry OBJECT-TYPE
SYNTAX F10BgpM2PathAttrExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an extended community association
provided with a path to a network."
INDEX {
f10BgpM2PathAttrIndex,
f10BgpM2PathAttrExtCommIndex
}
::= { f10BgpM2PathAttrExtCommTable 1 }
F10BgpM2PathAttrExtCommEntry ::= SEQUENCE {
f10BgpM2PathAttrExtCommIndex
Unsigned32,
f10BgpM2PathAttrExtCommValue
F10BgpM2ExtendedCommunity
}
f10BgpM2PathAttrExtCommIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integral index for a row in this table."
::= { f10BgpM2PathAttrExtCommEntry 1 }
f10BgpM2PathAttrExtCommValue OBJECT-TYPE
SYNTAX F10BgpM2ExtendedCommunity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value representing an extended community which was
received with the route implied by the f10BgpM2PathAttr
Index value of this row data. There are certain
8-octet long values which could be returned in this
columnar row data that carry additional semantics."
REFERENCE
"BGP-EXTCOMM - BGP Extended Communities Attribute"
::= { f10BgpM2PathAttrExtCommEntry 2 }
--
-- RFC 2545 link local nexthop
--
f10BgpM2LinkLocalNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10BgpM2LinkLocalNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of link local nexthops as sent by RFC 2545
for IPv6 BGP Speakers."
REFERENCE
"RFC 2545 - Use of BGP-4 Multiprotocol Extensions
for IPv6 Inter-Domain Routing"
::= { f10BgpM2PathAttrNonCapExts 2545 }
f10BgpM2LinkLocalNextHopEntry OBJECT-TYPE
SYNTAX F10BgpM2LinkLocalNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing the link-local nexthops as sent
by a BGP speaker running RFC 2545 extensions for
double-nexthops."
INDEX {
f10BgpM2PathAttrIndex
}
::= { f10BgpM2LinkLocalNextHopTable 1 }
F10BgpM2LinkLocalNextHopEntry ::= SEQUENCE {
f10BgpM2LinkLocalNextHopPresent
TruthValue,
f10BgpM2LinkLocalNextHop
InetAddress
}
f10BgpM2LinkLocalNextHopPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if and only if the BGP
speaker is receiving IPv6 NLRI using the
RFC 2545 double nexthop convention and it
has received a link local scope nexthop in
addition to the global scope nexthop."
::= { f10BgpM2LinkLocalNextHopEntry 1 }
f10BgpM2LinkLocalNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains an IPv6 link local address of
InetAddressType of type ipv6z. This value is only
present if f10BgpM2LinkLocalNextHopPresent is true."
::= { f10BgpM2LinkLocalNextHopEntry 2 }
--
-- Conformance Information
--
f10BgpM2Conformance
OBJECT IDENTIFIER ::= { f10BgpM2 4 }
f10BgpM2MIBCompliances OBJECT IDENTIFIER ::=
{ f10BgpM2Conformance 1 }
f10BgpM2MIBGroups OBJECT IDENTIFIER ::=
{ f10BgpM2Conformance 2 }
f10BgpM2MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the BGP4 mib."
MODULE -- this module
MANDATORY-GROUPS {
f10BgpM2TimersGroup,
f10BgpM2CountersGroup,
f10BgpM2AsPathGroup,
f10BgpM2As4byteGroup,
f10BgpM2BaseGroup,
f10BgpM2ErrorsGroup,
f10BgpM2PeerGroup,
f10BgpM2PathAttributesGroup
}
GROUP f10BgpM2MIBNotificationsGroup
DESCRIPTION
"The notifications group is completely optional,
but highly recommended."
GROUP f10BgpM2CommunitiesGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP community attribute."
GROUP f10BgpM2ExtCommunitiesGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP extended community attribute."
GROUP f10BgpM2RouteReflectionGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP route reflection relationships."
GROUP f10BgpM2AsConfederationGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP confederation membership."
GROUP f10BgpM2TimersGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2CountersGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2CapabilitiesGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2AsPathGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2As4byteGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2BaseGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2ErrorsGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2PeerGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2PathAttributesGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP f10BgpM2PeerConfigurationGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration via SNMP."
GROUP f10BgpM2PeerRouteReflectorCfgGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of route reflection via SNMP.
Implementation of this feature requires support of the
f10BgpM2PeerConfigurationGroup."
GROUP f10BgpM2PeerAsConfederationCfgGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of BGP AS Confederations via SNMP.
Implementation of this feature requires support of the
f10BgpM2PeerConfigurationGroup."
GROUP f10BgpM2Rfc2545Group
DESCRIPTION
"This group is required for peers that support exchanging
of IPv6 NLRI per RFC 2545."
::= { f10BgpM2MIBCompliances 1 }
f10BgpM2CommunitiesGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PathAttrCommIndex,
f10BgpM2PathAttrCommValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP communities."
::= { f10BgpM2MIBGroups 1 }
f10BgpM2ExtCommunitiesGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PathAttrExtCommIndex,
f10BgpM2PathAttrExtCommValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP extended communities."
::= { f10BgpM2MIBGroups 2 }
f10BgpM2RouteReflectionGroup OBJECT-GROUP
OBJECTS {
f10BgpM2RouteReflector,
f10BgpM2ClusterId,
f10BgpM2PeerReflectorClient,
f10BgpM2PathAttrOriginatorId,
f10BgpM2PathAttrClusterIndex,
f10BgpM2PathAttrClusterValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP route reflection."
::= { f10BgpM2MIBGroups 3 }
f10BgpM2AsConfederationGroup OBJECT-GROUP
OBJECTS {
f10BgpM2ConfederationRouter,
f10BgpM2ConfederationId,
f10BgpM2PeerConfedMember
}
STATUS current
DESCRIPTION
"Objects associated with BGP confederation membership."
::= { f10BgpM2MIBGroups 4 }
f10BgpM2TimersGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PeerFsmEstablishedTime,
f10BgpM2PeerInUpdatesElapsedTime,
f10BgpM2PeerConnectRetryInterval,
f10BgpM2PeerHoldTimeConfigured,
f10BgpM2PeerKeepAliveConfigured,
f10BgpM2PeerMinASOrigInterval,
f10BgpM2PeerMinRouteAdverInterval,
f10BgpM2PeerHoldTime,
f10BgpM2PeerKeepAlive
}
STATUS current
DESCRIPTION
"Objects associated with BGP peering timers."
::= { f10BgpM2MIBGroups 5 }
f10BgpM2CountersGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PeerInUpdates,
f10BgpM2PeerOutUpdates,
f10BgpM2PeerInTotalMessages,
f10BgpM2PeerOutTotalMessages,
f10BgpM2PeerFsmEstablishedTrans,
f10BgpM2PeerInKeepalives,
f10BgpM2PeerOutKeepalives,
f10BgpM2PeerInOpen,
f10BgpM2PeerOutOpen,
f10BgpM2PeerInRteRefresh,
f10BgpM2PeerOutRteRefresh,
f10BgpM2PrefixCountersAfi,
f10BgpM2PrefixCountersSafi,
f10BgpM2PrefixInPrefixes,
f10BgpM2PrefixInPrefixesAccepted,
f10BgpM2PrefixInPrefixesRejected,
f10BgpM2PrefixOutPrefixes,
f10BgpM2PrefixWdrawnByPeer,
f10BgpM2PrefixWdrawnFromPeer
}
STATUS current
DESCRIPTION
"Objects to count discrete events and exchanges on BGP
sessions."
::= { f10BgpM2MIBGroups 6 }
f10BgpM2CapabilitiesGroup OBJECT-GROUP
OBJECTS {
f10BgpM2CapabilitySupportAvailable,
f10BgpM2SupportedCapabilityCode,
f10BgpM2SupportedCapability,
f10BgpM2PeerCapAnnouncedCode,
f10BgpM2PeerCapAnnouncedIndex,
f10BgpM2PeerCapAnnouncedValue,
f10BgpM2PeerCapReceivedCode,
f10BgpM2PeerCapReceivedIndex,
f10BgpM2PeerCapReceivedValue
}
STATUS current
DESCRIPTION
"Objects to report capabilities as received on BGP
sessions."
::= { f10BgpM2MIBGroups 7 }
f10BgpM2AsPathGroup OBJECT-GROUP
OBJECTS {
f10BgpM2AsPathSegmentIndex,
f10BgpM2AsPathElementIndex,
f10BgpM2AsPathType,
f10BgpM2AsPathElementValue
}
STATUS current
DESCRIPTION
"Objects to report AS paths received on BGP NLRIs."
::= { f10BgpM2MIBGroups 8 }
f10BgpM2As4byteGroup OBJECT-GROUP
OBJECTS {
f10BgpM2AsSize,
f10BgpM2AsPath4bytePathPresent,
f10BgpM2AsPath4byteAggregatorAS,
f10BgpM2AsPath4byteCalcLength,
f10BgpM2AsPath4byteString,
f10BgpM2AsPath4byteIndex
}
STATUS current
DESCRIPTION
"AS Size objects."
::= { f10BgpM2MIBGroups 9 }
f10BgpM2BaseGroup OBJECT-GROUP
OBJECTS {
f10BgpM2LocalAs,
f10BgpM2LocalIdentifier,
f10BgpM2VersionIndex,
f10BgpM2VersionSupported
}
STATUS current
DESCRIPTION
"Basic objects in local BGP implementation."
::= { f10BgpM2MIBGroups 10 }
f10BgpM2ErrorsGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PeerLastErrorReceived,
f10BgpM2PeerLastErrorReceivedData,
f10BgpM2PeerLastErrorReceivedTime,
f10BgpM2PeerLastErrorReceivedText,
f10BgpM2PeerLastErrorSent,
f10BgpM2PeerLastErrorSentData,
f10BgpM2PeerLastErrorSentTime,
f10BgpM2PeerLastErrorSentText
}
STATUS current
DESCRIPTION
"Errors received on BGP peering sessions."
::= { f10BgpM2MIBGroups 11 }
f10BgpM2PeerGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PeerInstance,
f10BgpM2PeerIdentifier,
f10BgpM2PeerState,
f10BgpM2PeerStatus,
f10BgpM2PeerConfiguredVersion,
f10BgpM2PeerNegotiatedVersion,
f10BgpM2PeerLocalAddrType,
f10BgpM2PeerLocalAddr,
f10BgpM2PeerLocalPort,
f10BgpM2PeerLocalAs,
f10BgpM2PeerRemoteAddrType,
f10BgpM2PeerRemoteAddr,
f10BgpM2PeerRemotePort,
f10BgpM2PeerRemoteAs,
f10BgpM2PeerIndex
}
STATUS current
DESCRIPTION
"Core object types on BGP peering sessions."
::= { f10BgpM2MIBGroups 12 }
f10BgpM2PathAttributesGroup OBJECT-GROUP
OBJECTS {
f10BgpM2PathAttrCount,
f10BgpM2AsPathCalcLength,
f10BgpM2AsPathElementValue,
f10BgpM2AsPathIndex,
f10BgpM2AsPathString,
f10BgpM2AsPathType,
f10BgpM2NlriAfi,
f10BgpM2NlriBest,
f10BgpM2NlriPrefixType,
f10BgpM2NlriPrefix,
f10BgpM2NlriPrefixLen,
f10BgpM2NlriSafi,
f10BgpM2NlriOpaqueType,
f10BgpM2NlriOpaquePointer,
f10BgpM2NlriIndex,
f10BgpM2NlriCalcLocalPref,
f10BgpM2AdjRibsOutIndex,
f10BgpM2AdjRibsOutRoute,
f10BgpM2PathAttrAggregatorAS,
f10BgpM2PathAttrAggregatorAddr,
f10BgpM2PathAttrAtomicAggregate,
f10BgpM2PathAttrIndex,
f10BgpM2PathAttrLocalPref,
f10BgpM2PathAttrLocalPrefPresent,
f10BgpM2PathAttrMed,
f10BgpM2PathAttrMedPresent,
f10BgpM2PathAttrNextHop,
f10BgpM2PathAttrNextHopAddrType,
f10BgpM2PathAttrOrigin,
f10BgpM2PathAttrUnknownIndex,
f10BgpM2PathAttrUnknownType,
f10BgpM2PathAttrUnknownValue
}
STATUS current
DESCRIPTION
"Attributes received on BGP peering sessions."
::= { f10BgpM2MIBGroups 13 }
f10BgpM2PeerConfigurationGroup OBJECT-GROUP
OBJECTS {
f10BgpM2CfgBaseScalarStorageType,
f10BgpM2CfgLocalAs,
f10BgpM2CfgLocalIdentifier,
f10BgpM2CfgPeerAdminStatus,
f10BgpM2CfgPeerNextIndex,
f10BgpM2CfgPeerConfiguredVersion,
f10BgpM2CfgAllowVersionNegotiation,
f10BgpM2CfgPeerLocalAddrType,
f10BgpM2CfgPeerLocalAddr,
f10BgpM2CfgPeerLocalAs,
f10BgpM2CfgPeerRemoteAddrType,
f10BgpM2CfgPeerRemoteAddr,
f10BgpM2CfgPeerRemoteAs,
f10BgpM2CfgPeerEntryStorageType,
f10BgpM2CfgPeerError,
f10BgpM2CfgPeerBgpPeerEntry,
f10BgpM2CfgPeerRowEntryStatus,
f10BgpM2CfgPeerIndex,
f10BgpM2CfgPeerStatus,
f10BgpM2CfgPeerConnectRetryInterval,
f10BgpM2CfgPeerHoldTimeConfigured,
f10BgpM2CfgPeerKeepAliveConfigured,
f10BgpM2CfgPeerMinASOrigInterval,
f10BgpM2CfgPeerMinRouteAdverInter
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers."
::= { f10BgpM2MIBGroups 14 }
f10BgpM2PeerRouteReflectorCfgGroup OBJECT-GROUP
OBJECTS {
f10BgpM2CfgRouteReflector,
f10BgpM2CfgClusterId,
f10BgpM2CfgPeerReflectorClient
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support route
reflection."
::= { f10BgpM2MIBGroups 15 }
f10BgpM2PeerAsConfederationCfgGroup OBJECT-GROUP
OBJECTS {
f10BgpM2CfgConfederationRouter,
f10BgpM2CfgConfederationId,
f10BgpM2CfgPeerConfedMember
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support BGP
confederations."
::= { f10BgpM2MIBGroups 16 }
f10BgpM2MIBNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
f10BgpM2Established,
f10BgpM2BackwardTransition
}
STATUS current
DESCRIPTION
"This group contains objects for notifications
supported by this mib module."
::= { f10BgpM2MIBGroups 17 }
f10BgpM2Rfc2545Group OBJECT-GROUP
OBJECTS {
f10BgpM2LinkLocalNextHopPresent,
f10BgpM2LinkLocalNextHop
}
STATUS current
DESCRIPTION
"This group is required for peers that support exchanging
of IPv6 NLRI per RFC 2545."
::= { f10BgpM2MIBGroups 18 }
END