mibs/MIBS/enterasys/CTRON-SSR-L2-MIB

1065 lines
37 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
CTRON-SSR-L2-MIB DEFINITIONS ::= BEGIN
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise-specific schema to access SSR Layer 2 processing subsystem..
--
-- This module will be extended, as required.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright June 1998 Cabletron Systems
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks
FROM SNMPv2-SMI
PhysAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ssrMibs
FROM CTRON-SSR-SMI-MIB;
l2MIB MODULE-IDENTITY
LAST-UPDATED
"9802090000Z"
ORGANIZATION
"Cabletron Systems, Inc."
CONTACT-INFO
"Cabletron Systems, Inc.
35 Industrial Way, P.O. Box 5005
Rochester, NH 03867-0505
(603) 332-9400
support@ctron.com
http://www.ctron.com"
DESCRIPTION
"This module defines a schema to access SSR Layer 2 processing subsystem.
This mib is no longer supported on ssr platforms. features of this
mib now exist in standard mibs. RMON I RFC 1757 provides
Layer 2 information and ctron-ssr-policy mib to program filter tables."
REVISION "9909220000Z"
DESCRIPTION "Firmware release 3.0 introduces full rmon I and II. this
enterprise mib is now obsolete."
::= { ssrMibs 500 }
-- The L2 Information Group
l2Group OBJECT IDENTIFIER ::= { ssrMibs 2 }
l2LearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of Forwarding Database entries,
which have been or would have been learned, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent."
REFERENCE
"RFC 1493 dot1dTp group dot1dTpLearnedEntryDiscards"
::= { l2Group 1 }
l2LearnedMacEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of MAC entries. The total number
is equal to the number of unique VLAN id and MAC
address pairs on the switch."
::= { l2Group 2 }
l2LearnedFlowEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of Flow entries. The total number
is equal to the number of unique VLAN id, source MAC
address and destination MAC address 3-tuple on the switch."
::= { l2Group 3 }
-- The L2-Flow and Forward Database Table
-- This L2 table contains information on all the layer 2
-- flows the switch is obsoletely processing.
l2ForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ForwardEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of L2 flow entries."
::= { l2Group 4 }
l2ForwardEntry OBJECT-TYPE
SYNTAX L2ForwardEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry containing the L2 flow"
INDEX { l2ForwardFilterId,
l2ForwardDstMacAddr,
l2ForwardSrcMacAddr,
l2ForwardVlanId
}
::= { l2ForwardTable 1 }
L2ForwardEntry ::=
SEQUENCE {
l2ForwardFilterId INTEGER,
l2ForwardDstMacAddr PhysAddress,
l2ForwardSrcMacAddr PhysAddress,
l2ForwardVlanId INTEGER,
l2ForwardDstPort INTEGER,
l2ForwardInPorts OCTET STRING
}
l2ForwardFilterId OBJECT-TYPE
SYNTAX INTEGER (0..14)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"A filter number which is used to get the next row from the
L2 Forwarding table. A zero implies no filter. When a number
is used, the index(s) specified in the first GET_NEXT
is used as a filter for future GET_NEXT's using the same
FilterId."
-- DEFVAL { 0 }
::= { l2ForwardEntry 1 }
l2ForwardDstMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The destination MAC address which has been learned."
::= { l2ForwardEntry 2 }
l2ForwardSrcMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The source MAC address, which is present in case
of a Flow, that has been learned by the switch."
::= { l2ForwardEntry 3 }
l2ForwardVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The VLAN the destination MAC address belongs to."
::= { l2ForwardEntry 4 }
l2ForwardDstPort OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The physical port number in the shelf/Chassis to which the
frame will be forwarded.
A zero implies that the frame destined to this destination
MAC address will be forwarded to multiple ports. This
implies a Multicast or unknown Unicast frame."
::= { l2ForwardEntry 5 }
l2ForwardInPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The set of physical ports to which this entry is contained in
the L2 tables. Each octet within the value of this
object specifies a set of eight ports.
The first octet specifying ports 1 through 8,
the second octet specifying ports 9 through 16, etc.
Within each octet, the least
significant bit represents the lowest numbered
port and the most significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of zeroes of appropriate
length. The maximum number of ports/card-module
is sysHwModuleNumPorts."
::= { l2ForwardEntry 6 }
-- The L2-Flow Priority Table
-- This L2 table contains information on all the layer 2
-- flow priorities/Quality of Service.
l2PriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PriorityEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of L2 flow entries."
::= { l2Group 5 }
l2PriorityEntry OBJECT-TYPE
SYNTAX L2PriorityEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry containing the L2 flow."
INDEX { l2PriorityIndex }
::= { l2PriorityTable 1 }
L2PriorityEntry ::=
SEQUENCE {
l2PriorityIndex INTEGER,
l2PriorityDesc OCTET STRING,
l2PriorityDstMacAddr PhysAddress,
l2PrioritySrcMacAddr PhysAddress,
l2PriorityVlanId INTEGER,
l2PriorityInPorts OCTET STRING,
l2Priority INTEGER
}
l2PriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535) -- TODO verify this
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A unique index into the L2 priority table."
::= { l2PriorityEntry 1 }
l2PriorityDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..25))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A string used to identify the flow by name."
::= { l2PriorityEntry 2 }
l2PriorityDstMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The destination MAC address which has been learned."
::= { l2PriorityEntry 3 }
l2PrioritySrcMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The source MAC address, which is present in case
of a Flow, that has been learned by the switch."
::= { l2PriorityEntry 4 }
l2PriorityVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The VLAN the destination MAC address belongs to."
::= { l2PriorityEntry 5 }
l2PriorityInPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The set of physical ports which allow this source MAC address.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the least
significant bit represents the lowest numbered
port, and the most significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of zeroes of appropriate
length. The maximum number of ports per Module/Card
is sysHwModuleNumPorts."
::= { l2PriorityEntry 6 }
l2Priority OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3),
control(4)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The priority for this L2 flow. There are four
priority levels: low, medium, high and control.
The highest priority class is reserved for router control traffic,
which leaves three classes, high, medium, and low for normal
data flows. Buffered traffic in higher priority classes is sent ahead
of pending traffic in lower priority classes, which allows latency
and throughput demands to be maintained for the higher priority traffic.
To prevent low priority traffic from waiting indefinitely as higher
priority traffic fills the wire, a weighted fair queuing mechanism provides
adjustable minimum bandwidth guarantees at each output port, thereby ensuring
that some traffic from each priority class always gets through."
::= { l2PriorityEntry 7 }
-- The L2 Filter Table
-- This L2 table contains information on all the layer 2
-- address filters, static entries & address locks
l2FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2FilterEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of L2 filters."
::= { l2Group 6 }
l2FilterEntry OBJECT-TYPE
SYNTAX L2FilterEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry containing the L2 filter."
INDEX { l2FilterIndex }
::= { l2FilterTable 1 }
L2FilterEntry ::=
SEQUENCE {
l2FilterIndex INTEGER,
l2FilterDesc OCTET STRING,
l2FilterType INTEGER,
l2FilterRestrictions INTEGER,
l2FilterDstMacAddr PhysAddress,
l2FilterSrcMacAddr PhysAddress,
l2FilterVlanId INTEGER,
l2FilterInPorts OCTET STRING,
l2FilterOutPorts OCTET STRING
}
l2FilterIndex OBJECT-TYPE
SYNTAX INTEGER (0..7) -- TODO verify this
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A unique index into the table."
::= { l2FilterEntry 1 }
l2FilterDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..25))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A string used to identify the filter by an name."
::= { l2FilterEntry 2 }
l2FilterType OBJECT-TYPE
SYNTAX INTEGER {
staticEntry(1),
addressFilter(2),
addressLock(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The types of filters, as explained below.
static-entry
Based on the restrictions and the presence of
source, destination MAC address they can be of
three types :
source-static-entry - All frames with a source
address equal to srcMAC, coming through any of
the inPorts will be allowed/disallowed to go
to any port that is a member of the outPorts
list.
destination-static-entry - All frames with a
destination address equal to dstMAC, coming
through any of the inPorts will be allowed/
disallowed/forced to go to any port that is a
member of the outPorts list.
flow-static-entry - All frames with a source
address equal to srcMAC and a destination address
equal to dstMAC, coming through any of the inPorts
list will be allowed/disallowed to go to any port
that is a member of the outPorts list.
address-filter
Based on the restrictions and the presence of
source, destination MAC address they can be of
three types :
source-address-filter - All frames with a source
address equal to srcMAC, coming through any of
the inPorts will be filtered out.
destination-address-filter - All frames with a
destination address equal to dstMAC, coming through
any of the inPorts will be filtered out.
flow-filter - All frames with a source address equal
to srcMAC and a destination address equal to dstMAC,
coming through any of the inPorts list will be
filtered out.
address-lock
This locks a source address to a port. It allows
learning of srcMAC addresses only on any of the ports
in inPorts."
::= { l2FilterEntry 3 }
l2FilterRestrictions OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2),
force(3),
none(4)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The restrictions which are applied when the filterType
is static-entry."
::= { l2FilterEntry 4 }
l2FilterSrcMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The source MAC address, which is present in case
of a Flow, that has been learned by the switch."
::= { l2FilterEntry 5 }
l2FilterDstMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The destination MAC address which has been learned."
::= { l2FilterEntry 6 }
l2FilterVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The VLAN the destination MAC address belongs to."
::= { l2FilterEntry 7 }
l2FilterInPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The set of physical ports which allow this source MAC address.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the least
significant bit represents the lowest numbered
port, and the most significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of zeroes of appropriate
length. The maximum number of ports/card-module
is sysHwModuleNumPorts."
::= { l2FilterEntry 8 }
l2FilterOutPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The set of ports which allow this destination MAC address.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of zeroes of appropriate
length."
::= { l2FilterEntry 9 }
-- The L2 Port Security Table
-- This L2 table contains information on all the layer 2
-- port security filters.
l2PortSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PortSecurityEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of L2 port security filters."
::= { l2Group 7 }
l2PortSecurityEntry OBJECT-TYPE
SYNTAX L2PortSecurityEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry containing the L2 filter."
INDEX { l2PortSecurityIndex }
::= { l2PortSecurityTable 1 }
L2PortSecurityEntry ::=
SEQUENCE {
l2PortSecurityIndex INTEGER,
l2PortSecurityDesc OCTET STRING,
l2PortSecurityType INTEGER,
l2PortSecurityVlanId INTEGER,
l2PortSecurityInPorts OCTET STRING
}
l2PortSecurityIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535) -- TODO: verify this
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A unique index into the table."
::= { l2PortSecurityEntry 1 }
l2PortSecurityDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..25))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A string used to identify the filter by a name."
::= { l2PortSecurityEntry 2 }
l2PortSecurityType OBJECT-TYPE
SYNTAX INTEGER {
sourceSecure(1),
destinationSecure(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The security filters are of two types :
source-secure
For all the ports in inPorts forward only those
frames that match source-static-entry filter from
the l2FilterTable.
destination-secure
For all the ports in inPorts forward only those
frames that match destination-static-entry filter from
the l2FilterTable."
::= { l2PortSecurityEntry 3 }
l2PortSecurityVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The VLAN the destination MAC address belongs to."
::= { l2PortSecurityEntry 4 }
l2PortSecurityInPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The set of physical ports which allow this source MAC address.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the least
significant bit represents the lowest numbered
port, and the most significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of zeroes of appropriate
length."
::= { l2PortSecurityEntry 5 }
-- Port Table
l2PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table that contains information about every
physical port that is associated with this transparent
bridge."
::= { l2Group 8 }
l2PortEntry OBJECT-TYPE
SYNTAX L2PortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of information for each physical port."
INDEX { l2Port }
::= { l2PortTable 1 }
L2PortEntry ::=
SEQUENCE {
l2Port INTEGER,
l2PortAgingStatus INTEGER,
l2PortAgingTime INTEGER,
l2PortDemandAgeHiBound INTEGER,
l2PortDemandAgeLowBound INTEGER,
l2PortDemandAgeCount Counter32,
l2PortLearnedEntryDiscards Counter32,
l2PortSrcEntries Counter32,
l2PortDstEntries Counter32,
l2PortMgmtEntries Counter32,
l2PortMaxInfo INTEGER,
l2PortInFrames Counter32,
l2PortOutFrames Counter32
}
l2Port OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The port number of the port for which this entry
contains Transparent bridging management information."
::= { l2PortEntry 1 }
l2PortAgingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled (2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Whether aging is enabled or not on this port."
::= { l2PortEntry 2 }
l2PortAgingTime OBJECT-TYPE
SYNTAX INTEGER (5..1000000)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The time-out period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { l2PortEntry 3 }
l2PortDemandAgeHiBound OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"When the number of MAC entries on a physical port's L2 table reaches
the l2PortDemandAgeHiBound (95% full), a number of MAC entries
based on l2PortDemandAgeLowBound percentage will be removed
(aged-out) from the table."
::= { l2PortEntry 4 }
l2PortDemandAgeLowBound OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The l2PortDemandAgeLowBound value determines how many MAC
entries need to be aged-out. See l2PortDemandAgeHiBound. Default
value is 85%.
Example: if - L2 table capacity = 10,000 entries
- l2PortDemandAgeHiBound = 95%
- l2PortDemandAgeLowBound = 85%
When the L2 table reaches 95% capacity (9500 MAC entries),
10% of the entries will be aged-out."
::= { l2PortEntry 5 }
l2PortDemandAgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of times demand aging has taken
place on this physical port."
::= { l2PortEntry 6 }
l2PortLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of L2 Port table entries,
which have been or would have been learned, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
L2 port table is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent."
::= { l2PortEntry 7 }
l2PortSrcEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of MAC addresses/Flow entries that
reside on this ports L2 table as a source (i.e. for
a flow entry the source and destination MAC address's
lie on the same LAN segment)."
::= { l2PortEntry 8 }
l2PortDstEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of MAC addresses/Flow entries that
reside on this ports L2 table as a destination (i.e. for
a flow entry the destination MAC address was not learned
as a source)."
::= { l2PortEntry 9 }
l2PortMgmtEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of user configured entries, including
filters, bridge management addresses etc."
::= { l2PortEntry 10 }
l2PortMaxInfo OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The maximum size of the info/data (non-MAC) field that
this port will receive or transmit. See RFC 1493
for similar OID called dot1dTpPortMaxInfo."
::= { l2PortEntry 11 }
l2PortInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { l2PortEntry 12 }
l2PortOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { l2PortEntry 13 }
-- Port L2 Forward Table
l2PortForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PortForwardEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table that contains information about the
Forward/Flow Table that is associated with this
port."
::= { l2Group 9 }
l2PortForwardEntry OBJECT-TYPE
SYNTAX L2PortForwardEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of Flow/Forward information for this port."
INDEX { l2PortForwardPort, l2PortForwardIndex }
::= { l2PortForwardTable 1 }
L2PortForwardEntry ::=
SEQUENCE {
l2PortForwardPort INTEGER,
l2PortForwardIndex INTEGER,
l2PortForwardDstMacAddr PhysAddress,
l2PortForwardSrcMacAddr PhysAddress,
l2PortForwardVlanId INTEGER,
l2PortForwardDstPort INTEGER,
l2PortForwardStatus INTEGER,
l2PortForwardLastDetectedTime TimeTicks
}
l2PortForwardPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The port number of the port for which this entry
contains Transparent bridging management
information."
::= { l2PortForwardEntry 1 }
l2PortForwardIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"A unique index into the Flow/Forward database table."
::= { l2PortForwardEntry 2 }
l2PortForwardDstMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The destination MAC address which has been learned."
::= { l2PortForwardEntry 3 }
l2PortForwardSrcMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The source MAC address, which is present in case
of a Flow, that has been learned by the switch."
::= { l2PortForwardEntry 4 }
l2PortForwardVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The VLAN the destination MAC address belongs to."
::= { l2PortForwardEntry 5 }
l2PortForwardDstPort OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The physical port number to which the frame will be forwarded.
A zero implies that the frame destined to this destination
MAC address will be forwarded to multiple ports. This
implies a Multicast or unknown Unicast frame."
::= { l2PortForwardEntry 6 }
l2PortForwardStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The status of this entry. The meanings of the
values are:
other(1) : none of the following. This would
include the case where some other
MIB object (not the corresponding
instance of dot1dTpFdbPort, nor an
entry in the dot1dStaticTable) is
being used to determine if and how
frames addressed to the value of
the corresponding instance of
dot1dTpFdbAddress are being
forwarded.
invalid(2) : this entry is not longer valid
(e.g., it was learned but has since
aged-out), but has not yet been
flushed from the table.
learned(3) : the value of the corresponding
instance of dot1dTpFdbPort was
learned, and is being used.
self(4) : the value of the corresponding
instance of dot1dTpFdbAddress
represents one of the bridge's
addresses. The corresponding
instance of dot1dTpFdbPort
indicates which of the bridge's
ports has this address.
mgmt(5) : the value of the corresponding
instance of dot1dTpFdbAddress is
also the value of an existing
instance of dot1dStaticAddress."
::= { l2PortForwardEntry 7 }
l2PortForwardLastDetectedTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The time (in hundredths of a second) since the
last time this MAC address was detected by this
port."
::= { l2PortForwardEntry 8 }
-- ### Compliance ###
l2Conformance OBJECT IDENTIFIER ::= { l2MIB 2 }
l2Compliances OBJECT IDENTIFIER ::= { l2Conformance 1 }
l2Groups OBJECT IDENTIFIER ::= { l2Conformance 2 }
l2ComplianceV10 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for the SSR-L2-MIB."
MODULE -- this module
MANDATORY-GROUPS { l2ConfGroupV10 }
::= { l2ConfGroupV10 1 }
l2ConfGroupV10 OBJECT-GROUP
OBJECTS {
l2LearnedEntryDiscards,
l2LearnedMacEntries,
l2LearnedFlowEntries,
l2ForwardFilterId,
l2ForwardDstMacAddr,
l2ForwardSrcMacAddr,
l2ForwardVlanId,
l2ForwardDstPort,
l2ForwardInPorts,
l2PriorityIndex,
l2PriorityDesc,
l2PriorityDstMacAddr,
l2PrioritySrcMacAddr,
l2PriorityVlanId,
l2PriorityInPorts,
l2Priority,
l2FilterIndex,
l2FilterDesc,
l2FilterType,
l2FilterRestrictions,
l2FilterSrcMacAddr,
l2FilterDstMacAddr,
l2FilterVlanId,
l2FilterInPorts,
l2FilterOutPorts,
l2PortSecurityIndex,
l2PortSecurityDesc,
l2PortSecurityType,
l2PortSecurityVlanId,
l2PortSecurityInPorts,
l2Port,
l2PortAgingStatus,
l2PortAgingTime,
l2PortDemandAgeHiBound,
l2PortDemandAgeLowBound,
l2PortDemandAgeCount,
l2PortLearnedEntryDiscards,
l2PortSrcEntries,
l2PortDstEntries,
l2PortMgmtEntries,
l2PortMaxInfo,
l2PortInFrames,
l2PortOutFrames,
l2PortForwardPort,
l2PortForwardIndex,
l2PortForwardDstMacAddr,
l2PortForwardSrcMacAddr,
l2PortForwardVlanId,
l2PortForwardDstPort,
l2PortForwardStatus,
l2PortForwardLastDetectedTime
}
STATUS obsolete
DESCRIPTION
"A set of managed objects that make up version 1.0 of the SSR Layer 2 mib."
::= { l2Groups 1 }
END