david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/hp/HP-ICF-SNMP-MIB

530 lines
21 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
HP-ICF-SNMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hpSwitch
FROM HP-ICF-OID
ifIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI;
-- 1.3.6.1.4.1.11.2.14.11.5.1.38
hpicfSnmpMIB MODULE-IDENTITY
LAST-UPDATED "200708240000Z" -- August 24, 2007 at 00:00 GMT
ORGANIZATION
"Hewlett-Packard Company
Procurve Networking Business"
CONTACT-INFO
"Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION
"This MIB module contains HP proprietary
objects for managing SNMP entity."
REVISION "200611110000Z" -- November 11, 2006 at 00:00 GMT
DESCRIPTION
"Updated description and changed InterfaceIndex
to InterfaceIndexOrZero for
hpicfSnmpResponseSourceAddrIfIndex and
hpicfSnmpTrapSourceAddrIfIndex objects."
REVISION "200609010000Z" -- September 01, 2006 at 00:00 GMT
DESCRIPTION
"Initial revision"
REVISION "200708240000Z" -- August 24, 2007 at 00:00 GMT
DESCRIPTION
"Added hpicfSnmpNotification information."
::= { hpSwitch 38 }
--
-- Node definitions
--
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.0
hpicfSnmpNotification OBJECT IDENTIFIER ::= { hpicfSnmpMIB 0 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.0.1
hpicfSnmpAuthFail NOTIFICATION-TYPE
OBJECTS { hpicfSnmpAuthFailCount, hpicfSnmpAuthFailIPType, hpicfSnmpAuthFailIP }
STATUS current
DESCRIPTION
"The switch sends this notification when an SNMP
SET command fails at the authorization check stage.
This notification applies to SETs within the hpicf tree that
are network security related. This object is controlled
by hpicfSnmpAuthNotifyEnable"
::= { hpicfSnmpNotification 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1
hpicfSnmpObjects OBJECT IDENTIFIER ::= { hpicfSnmpMIB 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1
hpicfSnmpConfig OBJECT IDENTIFIER ::= { hpicfSnmpObjects 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1
hpicfSnmpGlobalCfg OBJECT IDENTIFIER ::= { hpicfSnmpConfig 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1
hpicfSnmpResponseSourceAddrPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfSnmpResponseSourceAddrPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries used to configure the policy for
selecting source address while sending SNMP response.
When this entry is configured, the source address field
in the IP PKT header get modified based on the configured
option. There are 4 valid options that can be configured
for ipv4 and ipv6 networks
a) rfc1517
This is the default behavior if no other policy is
configured. In this case the source address will be
the address of the interface from which packet goes
out of the box.
b) user configured ip address
In this case the configured address will be used as
source address in the SNMP response.
c) user configured interface
In this case the IP address configured on the specified
interface will be used as source address in the SNMP
response. In case of multinet interface then smallest
IP address present on the interface in lexicographical
order will be used as source address while sending
SNMP responses for requests.
d) dst_ip_of_request
In this case, the destination ip address present in
the IP header of received SNMP request will be used
as source address in the SNMP response."
::= { hpicfSnmpGlobalCfg 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1
hpicfSnmpResponseSourceAddrPolicyEntry OBJECT-TYPE
SYNTAX HpicfSnmpResponseSourceAddrPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about
a single source address. This table alows only 2 values
that can be used as index to this table. These are:
1) hpicfSnmpResponseSourceAddressType = ipv4
Where user wants to configure the source address type
used while sending the SNMP response on IPV4 network.
2) hpicfSnmpResponseSourceAddressType = ipv6
Where user wants to configure the source address type
used while sending the SNMP response on IPV6 network."
INDEX { hpicfSnmpResponseSourceAddressType }
::= { hpicfSnmpResponseSourceAddrPolicyTable 1 }
HpicfSnmpResponseSourceAddrPolicyEntry ::=
SEQUENCE {
hpicfSnmpResponseSourceAddressType
InetAddressType,
hpicfSnmpResponseSourceAddrPolicy
INTEGER,
hpicfSnmpResponseSourceAddress
InetAddress,
hpicfSnmpResponseSourceAddrIfIndex
InterfaceIndexOrZero
}
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.1
hpicfSnmpResponseSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"We allow only 2 values for this object as an index for
hpicfSnmpResponseSourceAddrPolicyEntry -
1) hpicfSnmpResponseSourceAddressType = ipv4
Where user wants to configure the source address type
used while sending the SNMP response on IPV4 network
2) hpicfSnmpResponseSourceAddressType = ipv6
Where user wants to configure the source address type
used while sending the SNMP response on IPV6 network."
::= { hpicfSnmpResponseSourceAddrPolicyEntry 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.2
hpicfSnmpResponseSourceAddrPolicy OBJECT-TYPE
SYNTAX INTEGER
{
rfc1517(1),
configuredIP(2),
configuredInterface(3),
dstIpOfRequest(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This specifies the policy for selecting the source
address for outgoing SNMP responses.
a) rfc1517
This is the default behavior if no other policy is
configured. In this case the source address will be
the address of the interface from which packet goes
out of the box.
b) configuredIP
By setting this value will enable the SNMP agent to use
IP addresses specified in hpicfSnmpResponseSourceAddress
object as source address while sending the response.
hpicfSnmpResponseSourceAddress must be set to a valid
and active ip address before setting policy to
configuredIP.
c) configuredInterface
By setting this value will enable the SNMP agent to use
IP addresses configured on the interface specified by
hpicfSnmpResponseSourceAddrIfIndex object as source
address while sending the response.
In case of multinet interface then smallest IP
address present on the interface in lexicographical
order will be used as source address while sending
SNMP responses for requests.
hpicfSnmpResponseSourceAddrIfIndex object must be set
to a valid loopback interface number before setting
policy to configuredInterface.
d) dst_ip_of_request
In this case, the destination ip address present in
the IP header of received SNMP request will be used as
source address in the SNMP response."
DEFVAL { 1 }
::= { hpicfSnmpResponseSourceAddrPolicyEntry 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.3
hpicfSnmpResponseSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set the IP address which will be
used as source ip while sending the SNMP response.
This object should be used in conjunction with the
hpicfSnmpResponseSourceAddressType and
hpicfSnmpResponseSourceAddrPolicy."
::= { hpicfSnmpResponseSourceAddrPolicyEntry 3 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.4
hpicfSnmpResponseSourceAddrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set the interface whose IP address
will be used as source IP while sending the SNMP response.
This object should be used in conjunction with the
hpicfSnmpResponseSourceAddressType and
hpicfSnmpResponseSourceAddrPolicy."
::= { hpicfSnmpResponseSourceAddrPolicyEntry 4 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2
hpicfSnmpTrapSourceAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfSnmpTrapSourceAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of entries used to configure the source address
used while generating SNMP Traps. When this entry is
configured, the source address field in the IP PKT header
get modified based on the configured option."
::= { hpicfSnmpGlobalCfg 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1
hpicfSnmpTrapSourceAddrEntry OBJECT-TYPE
SYNTAX HpicfSnmpTrapSourceAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about
a single source address. This table alows only 2 values
that can be used as index to this table. These are:
1) hpicfSnmpResponseSourceAddressType = ipv4
Where user wants to configure the source address
used while sending the SNMP TRAPs on IPV4 network.
2) hpicfSnmpResponseSourceAddressType = ipv6
Where user wants to configure the source address
used while sending the SNMP TRAPs on IPV6 network."
INDEX { hpicfSnmpTrapSourceAddressType }
::= { hpicfSnmpTrapSourceAddrTable 1 }
HpicfSnmpTrapSourceAddrEntry ::=
SEQUENCE {
hpicfSnmpTrapSourceAddressType
InetAddressType,
hpicfSnmpTrapSourceAddrPolicy
INTEGER,
hpicfSnmpTrapSourceAddress
InetAddress,
hpicfSnmpTrapSourceAddrIfIndex
InterfaceIndexOrZero
}
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.1
hpicfSnmpTrapSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" This table alows only 2 values
that can be used as index to this table. These are:
1) hpicfSnmpResponseSourceAddressType = ipv4
Where user wants to configure the source address
used while sending the SNMP TRAPs on IPV4 network.
2) hpicfSnmpResponseSourceAddressType = ipv6
Where user wants to configure the source address
used while sending the SNMP TRAPs on IPV6 network."
::= { hpicfSnmpTrapSourceAddrEntry 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.2
hpicfSnmpTrapSourceAddrPolicy OBJECT-TYPE
SYNTAX INTEGER
{
rfc1517(1),
configuredIP(2),
configuredInterface(3),
dstIpOfRequest(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This specifies the policy for selecting the source
address for outgoing SNMP responses.
a) rfc1517
This is the default behavior if no other policy is
configured. In this case the source address will be
the address of the interface from which packet goes
out of the box.
b) configuredIP
By setting this value will enable the SNMP agent to use
IP addresses specified in hpicfSnmpResponseSourceAddress
object as source address while sending the response.
hpicfSnmpTrapSourceAddress must be set to a valid
and active ip address before setting policy to
configuredIP.
c) configuredInterface
By setting this value will enable the SNMP agent to use
IP addresses configured on the interface specified by
hpicfSnmpResponseSourceAddrIfIndex object as source
address while sending the response.
In case of multinet interface then smallest IP
address present on the interface in lexicographical
order will be used as source address while sending
SNMP responses for requests.
hpicfSnmpTrapSourceAddrIfIndex object must be set
to a valid loopback interface number before setting
policy to configuredInterface."
::= { hpicfSnmpTrapSourceAddrEntry 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.3
hpicfSnmpTrapSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set the IP address which will be
used as source ip while sending the SNMP TRAPs.
This object should be used in conjunction with the
hpicfSnmpResponseSourceAddressType and
hpicfSnmpTrapSourceAddrPolicy."
::= { hpicfSnmpTrapSourceAddrEntry 3 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.4
hpicfSnmpTrapSourceAddrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set the interface whose IP address
will be used as source ip while sending the SNMP TRAPs.
This object should be used in conjunction with the
hpicfSnmpResponseSourceAddressType and
hpicfSnmpTrapSourceAddrPolicy."
::= { hpicfSnmpTrapSourceAddrEntry 4 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3
hpicfSnmpAuthNotifyEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls whether hpicfSnmpAuthFail notifications will be generated.
The default value is <20>1<EFBFBD> (Enabled). A value of <20>2<EFBFBD> represents
Disabled. Writing this object requires authentication, such
as provided by SNMPv3.
NOTE that hpicfSnmpAuthFail and snmpEnableAuthenTraps (RFC-1157)
are mutually exclusive. While they may both be disabled, only
one may be enabled at any given time. Notifications enabled by
hpicfSnmpAuthFail are more comprehensive and are therefore
recommended."
::= { hpicfSnmpGlobalCfg 3 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2
hpicfSnmpNotificationObjects OBJECT IDENTIFIER ::= { hpicfSnmpObjects 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.1
hpicfSnmpAuthFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A count of SNMP authorization failures detected by the SNMP entity."
::= { hpicfSnmpNotificationObjects 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.2
hpicfSnmpAuthFailIPType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Type of IP address contained in hpicfSnmpAuthFailIP."
::= { hpicfSnmpNotificationObjects 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.3
hpicfSnmpAuthFailIP OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"IP address of sender of message that failed authentication."
::= { hpicfSnmpNotificationObjects 3 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2
hpicfSnmpConformance OBJECT IDENTIFIER ::= { hpicfSnmpMIB 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1
hpicfSnmpCompliances OBJECT IDENTIFIER ::= { hpicfSnmpConformance 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1.1
hpicfSnmpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"A compliance statement for HP Routing switches with SNMP"
MODULE -- this module
MANDATORY-GROUPS { hpicfSnmpResponseSourceAddrTableCompliancesGroup,
hpicfSnmpTrapSourceAddrTableCompliancesGroup }
GROUP hpicfSnmpResponseSourceAddrTableGroup
DESCRIPTION
"A Collection of Object(s) that allow
configuration of policies for selecting source address for
SNMP response."
GROUP hpicfSnmpTrapSourceAddrTableGroup
DESCRIPTION
"A Collection of Object(s) that allow
configuration of Trap source Addresses"
::= { hpicfSnmpCompliances 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2
hpicfSnmpCompliancesGroups OBJECT IDENTIFIER ::= { hpicfSnmpConformance 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.1
hpicfSnmpResponseSourceAddrTableCompliancesGroup OBJECT-GROUP
OBJECTS { hpicfSnmpResponseSourceAddressType,
hpicfSnmpResponseSourceAddrPolicy,
hpicfSnmpResponseSourceAddress,
hpicfSnmpResponseSourceAddrIfIndex }
STATUS current
DESCRIPTION
"A collection of objects allowing configuration of policies
in the switch for selecting the source address used while
generating SNMP response"
::= { hpicfSnmpCompliancesGroups 1 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.2
hpicfSnmpTrapSourceAddrTableCompliancesGroup OBJECT-GROUP
OBJECTS { hpicfSnmpTrapSourceAddressType,
hpicfSnmpTrapSourceAddrPolicy,
hpicfSnmpTrapSourceAddress,
hpicfSnmpTrapSourceAddrIfIndex }
STATUS current
DESCRIPTION
"A collection of objects allowing configuration of source
addresses for SNMP traps geneated by the switch."
::= { hpicfSnmpCompliancesGroups 2 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.3
hpicfSnmpResponseSourceAddrTableGroup OBJECT-GROUP
OBJECTS { hpicfSnmpResponseSourceAddressType,
hpicfSnmpResponseSourceAddrPolicy,
hpicfSnmpResponseSourceAddress,
hpicfSnmpResponseSourceAddrIfIndex }
STATUS current
DESCRIPTION
"Description."
::= { hpicfSnmpCompliancesGroups 3 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.4
hpicfSnmpTrapSourceAddrTableGroup OBJECT-GROUP
OBJECTS { hpicfSnmpResponseSourceAddressType,
hpicfSnmpResponseSourceAddrPolicy,
hpicfSnmpResponseSourceAddress,
hpicfSnmpResponseSourceAddrIfIndex }
STATUS current
DESCRIPTION
"Description."
::= { hpicfSnmpCompliancesGroups 4 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.5
hpicfSnmpNotifyObjectGroup OBJECT-GROUP
OBJECTS { hpicfSnmpAuthFailCount,
hpicfSnmpAuthFailIPType, hpicfSnmpAuthFailIP,
hpicfSnmpAuthNotifyEnable }
STATUS current
DESCRIPTION
"The operational status of hpicfSwitchAuthServerFail notifications.
The default value is <20>1<EFBFBD> (Enabled). A value of <20>2<EFBFBD> represents
Disabled. Writing this object requires authentication, such
as provided by SNMPv3."
::= { hpicfSnmpCompliancesGroups 5 }
-- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.6
hpicfSnmpNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hpicfSnmpAuthFail }
STATUS current
DESCRIPTION
"Description."
::= { hpicfSnmpCompliancesGroups 6 }
END
Reference in New Issue Copy Permalink