mibs/MIBS/hp/HP-SN-IPX-MIB

1330 lines
29 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
HP-SN-IPX-MIB DEFINITIONS ::= BEGIN
-- Foundry SnIpx Group MIB Release 1.0.0
-- Revision 0 1/7/97
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
snIpx
FROM HP-SN-ROOT-MIB;
-- textual conventions
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled(1) }
-- Clear Status Values
ClearStatus ::= INTEGER { normal(0), clear(1) }
-- Port index
PortIndex ::= INTEGER (1..3900)
-- Action
Action ::= INTEGER { deny(0), permit(1) }
PhysAddress ::= OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
NetNumber ::= OCTET STRING (SIZE(4))
-- SECTION 2: MIB
-- Router IPX MIB
snIpxGen OBJECT IDENTIFIER ::= { snIpx 1 }
snIpxCache OBJECT IDENTIFIER ::= { snIpx 2 }
snIpxRoute OBJECT IDENTIFIER ::= { snIpx 3 }
snIpxServer OBJECT IDENTIFIER ::= { snIpx 4 }
snIpxFwdFilter OBJECT IDENTIFIER ::= { snIpx 5 }
snIpxRipFilter OBJECT IDENTIFIER ::= { snIpx 6 }
snIpxSapFilter OBJECT IDENTIFIER ::= { snIpx 7 }
snIpxIfFwdAccess OBJECT IDENTIFIER ::= { snIpx 8 }
snIpxIfRipAccess OBJECT IDENTIFIER ::= { snIpx 9 }
snIpxIfSapAccess OBJECT IDENTIFIER ::= { snIpx 10 }
snIpxPortAddr OBJECT IDENTIFIER ::= { snIpx 11 }
snIpxPortCounters OBJECT IDENTIFIER ::= { snIpx 12 }
-- IPX General MIBs
snIpxRoutingMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/Disabled System IPX Routing Mode status."
::= { snIpxGen 1 }
snIpxNetBiosFilterMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/Disabled NetBios Filter Mode status."
::= { snIpxGen 2 }
snIpxClearCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear cache table."
::= { snIpxGen 3 }
snIpxClearRoute OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ipx route table."
::= { snIpxGen 4 }
snIpxClearTrafficCnts OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ipx all traffic counters.
- snIpxRcvPktsCnt, snIpxFwdPktsCnt,
snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt."
::= { snIpxGen 5 }
snIpxRcvPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX incoming packets counter."
::= { snIpxGen 6 }
snIpxTxPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Outgoing packets counter."
::= { snIpxGen 7 }
snIpxFwdPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX forwarding packets counter."
::= { snIpxGen 8 }
snIpxRcvDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving drop packets counter."
::= { snIpxGen 9 }
snIpxRcvFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving filter packets counter."
::= { snIpxGen 10 }
snIpxRipGblFiltList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX RIP Global Filter List."
::= { snIpxGen 11 }
snIpxRipFiltOnAllPort OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
deleteAllInBound(2),
deleteAllOutBound(3),
addAllInBound(4),
addAllOutBound(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the IPX RIP Global filter list snIpxRipGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all RIP filter lists to/from all ports.
Prior to sending this command, snIpxRipGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid"
::= { snIpxGen 12 }
snIpxSapGblFiltList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX SAP Global Filter List."
::= { snIpxGen 13 }
snIpxSapFiltOnAllPort OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
deleteAllInBound(2),
deleteAllOutBound(3),
addAllInBound(4),
addAllOutBound(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid"
::= { snIpxGen 14 }
snIpxTxDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting drop packets counter."
::= { snIpxGen 15 }
snIpxTxFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting filter packets counter."
::= { snIpxGen 16 }
-- IPX Cache table
snIpxCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX Cache table."
::= { snIpxCache 1 }
snIpxCacheEntry OBJECT-TYPE
SYNTAX SnIpxCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Cache table."
INDEX { snIpxCacheIndex }
::= { snIpxCacheTable 1 }
SnIpxCacheEntry ::= SEQUENCE {
snIpxCacheIndex
INTEGER,
snIpxCacheNetNum
NetNumber,
snIpxCacheNode
PhysAddress,
snIpxCacheOutFilter
RtrStatus,
snIpxCacheEncap
INTEGER,
snIpxCachePort
PortIndex
}
snIpxCacheIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IPX Cache entry."
::= { snIpxCacheEntry 1 }
snIpxCacheNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Network number."
::= { snIpxCacheEntry 2 }
snIpxCacheNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Node Number."
::= { snIpxCacheEntry 3 }
snIpxCacheOutFilter OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Outbound Filter is ether disabled(0) or enabled(1)."
::= { snIpxCacheEntry 4 }
snIpxCacheEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernetII(1),
ethernet8022(2),
ethernet8023(3),
ethernetSnap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX encapsulation frame type."
::= { snIpxCacheEntry 5 }
snIpxCachePort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Router Port number."
::= { snIpxCacheEntry 6 }
-- IPX route table
snIpxRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX route table."
::= { snIpxRoute 1 }
snIpxRouteEntry OBJECT-TYPE
SYNTAX SnIpxRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX route table."
INDEX { snIpxRouteIndex }
::= { snIpxRouteTable 1 }
SnIpxRouteEntry ::= SEQUENCE {
snIpxRouteIndex
INTEGER,
snIpxDestNetNum
NetNumber,
snIpxFwdRouterNode
PhysAddress,
snIpxDestHopCnts
INTEGER,
snIpxRouteMetric
INTEGER,
snIpxDestPort
INTEGER
}
snIpxRouteIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IPX route entry."
::= { snIpxRouteEntry 1 }
snIpxDestNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Destination Network number."
::= { snIpxRouteEntry 2 }
snIpxFwdRouterNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Forward Router Node Number."
::= { snIpxRouteEntry 3 }
snIpxDestHopCnts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of hops to reach the
destination."
::= { snIpxRouteEntry 4 }
snIpxRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The metrics to next hop router."
::= { snIpxRouteEntry 5 }
snIpxDestPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination port."
::= { snIpxRouteEntry 6 }
-- IPX Server table
snIpxServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX Server table."
::= { snIpxServer 1 }
snIpxServerEntry OBJECT-TYPE
SYNTAX SnIpxServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Server table."
INDEX { snIpxServerIndex }
::= { snIpxServerTable 1 }
SnIpxServerEntry ::= SEQUENCE {
snIpxServerIndex
INTEGER,
snIpxServerType
INTEGER,
snIpxServerNetNum
NetNumber,
snIpxServerNode
PhysAddress,
snIpxServerSocket
INTEGER,
snIpxServerHopCnts
INTEGER,
snIpxServerName
OCTET STRING
}
snIpxServerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IPX Server entry."
::= { snIpxServerEntry 1 }
snIpxServerType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Server Type."
::= { snIpxServerEntry 2 }
snIpxServerNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Network number."
::= { snIpxServerEntry 3 }
snIpxServerNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Node Number."
::= { snIpxServerEntry 4 }
snIpxServerSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Socket Number."
::= { snIpxServerEntry 5 }
snIpxServerHopCnts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of intervening networks to reach the
server."
::= { snIpxServerEntry 6 }
snIpxServerName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..47))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Server Name."
::= { snIpxServerEntry 7 }
-- IPX Forward Filter table
snIpxFwdFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxFwdFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX Forward Filter table."
::= { snIpxFwdFilter 1 }
snIpxFwdFilterEntry OBJECT-TYPE
SYNTAX SnIpxFwdFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Filter table."
INDEX { snIpxFwdFilterIdx }
::= { snIpxFwdFilterTable 1 }
SnIpxFwdFilterEntry ::= SEQUENCE {
snIpxFwdFilterIdx
INTEGER,
snIpxFwdFilterAction
Action,
snIpxFwdFilterSocket
INTEGER,
snIpxFwdFilterSrcNet
NetNumber,
snIpxFwdFilterSrcNode
PhysAddress,
snIpxFwdFilterDestNet
NetNumber,
snIpxFwdFilterDestNode
PhysAddress,
snIpxFwdFilterRowStatus
INTEGER
}
snIpxFwdFilterIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID for a filter entry."
::= { snIpxFwdFilterEntry 1 }
snIpxFwdFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ipx packet match
with this filter."
::= { snIpxFwdFilterEntry 2 }
snIpxFwdFilterSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX Forward Filter Socket Number."
::= { snIpxFwdFilterEntry 3 }
snIpxFwdFilterSrcNet OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source Network Number."
::= { snIpxFwdFilterEntry 4 }
snIpxFwdFilterSrcNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source Node Number."
::= { snIpxFwdFilterEntry 5 }
snIpxFwdFilterDestNet OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination Network Number."
::= { snIpxFwdFilterEntry 6 }
snIpxFwdFilterDestNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination Node Number."
::= { snIpxFwdFilterEntry 7 }
snIpxFwdFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxFwdFilterEntry 8 }
-- IPX RIP Filter table
snIpxRipFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxRipFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX RIP Filter table."
::= { snIpxRipFilter 1 }
snIpxRipFilterEntry OBJECT-TYPE
SYNTAX SnIpxRipFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX RIP Filter table."
INDEX { snIpxRipFilterId }
::= { snIpxRipFilterTable 1 }
SnIpxRipFilterEntry ::= SEQUENCE {
snIpxRipFilterId
INTEGER,
snIpxRipFilterAction
Action,
snIpxRipFilterNet
NetNumber,
snIpxRipFilterMask
NetNumber,
snIpxRipFilterRowStatus
INTEGER
}
snIpxRipFilterId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID for a filter entry."
::= { snIpxRipFilterEntry 1 }
snIpxRipFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ipx packet match
with this filter."
::= { snIpxRipFilterEntry 2 }
snIpxRipFilterNet OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX RIP Filter Network number."
::= { snIpxRipFilterEntry 3 }
snIpxRipFilterMask OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX RIP Filter Network/Subnet Mask."
::= { snIpxRipFilterEntry 4 }
snIpxRipFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxRipFilterEntry 5 }
-- IPX SAP Filter table
snIpxSapFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxSapFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX SAP Filter table."
::= { snIpxSapFilter 1 }
snIpxSapFilterEntry OBJECT-TYPE
SYNTAX SnIpxSapFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX SAP Filter table."
INDEX { snIpxSapFilterId }
::= { snIpxSapFilterTable 1 }
SnIpxSapFilterEntry ::= SEQUENCE {
snIpxSapFilterId
INTEGER,
snIpxSapFilterAction
Action,
snIpxSapFilterType
INTEGER,
snIpxSapFilterName
OCTET STRING,
snIpxSapFilterRowStatus
INTEGER
}
snIpxSapFilterId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID for a filter entry."
::= { snIpxSapFilterEntry 1 }
snIpxSapFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ipx packet match
with this filter."
::= { snIpxSapFilterEntry 2 }
snIpxSapFilterType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX SAP Filter type to be matched."
::= { snIpxSapFilterEntry 3 }
snIpxSapFilterName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..47))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX SAP Filter Name."
::= { snIpxSapFilterEntry 4 }
snIpxSapFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxSapFilterEntry 5 }
-- IPX IF Forward Access table
snIpxIfFwdAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxIfFwdAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX IF Forward Access table."
::= { snIpxIfFwdAccess 1 }
snIpxIfFwdAccessEntry OBJECT-TYPE
SYNTAX SnIpxIfFwdAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Access table."
INDEX { snIpxIfFwdAccessPort, snIpxIfFwdAccessDir }
::= { snIpxIfFwdAccessTable 1 }
SnIpxIfFwdAccessEntry ::= SEQUENCE {
snIpxIfFwdAccessPort
INTEGER,
snIpxIfFwdAccessDir
INTEGER,
snIpxIfFwdAccessFilterList
OCTET STRING,
snIpxIfFwdAccessRowStatus
INTEGER
}
snIpxIfFwdAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX interface to which the Forward Filter applies."
::= { snIpxIfFwdAccessEntry 1 }
snIpxIfFwdAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snIpxIfFwdAccessEntry 2 }
snIpxIfFwdAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX IF Forward Filter List."
::= { snIpxIfFwdAccessEntry 3 }
snIpxIfFwdAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxIfFwdAccessEntry 4 }
-- IPX IF RIP Access table
snIpxIfRipAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxIfRipAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX IF RIP Access table."
::= { snIpxIfRipAccess 1 }
snIpxIfRipAccessEntry OBJECT-TYPE
SYNTAX SnIpxIfRipAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Access table."
INDEX { snIpxIfRipAccessPort, snIpxIfRipAccessDir }
::= { snIpxIfRipAccessTable 1 }
SnIpxIfRipAccessEntry ::= SEQUENCE {
snIpxIfRipAccessPort
INTEGER,
snIpxIfRipAccessDir
INTEGER,
snIpxIfRipAccessFilterList
OCTET STRING,
snIpxIfRipAccessRowStatus
INTEGER
}
snIpxIfRipAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX interface to which the RIP Filter applies."
::= { snIpxIfRipAccessEntry 1 }
snIpxIfRipAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snIpxIfRipAccessEntry 2 }
snIpxIfRipAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX IF RIP Access Filter List."
::= { snIpxIfRipAccessEntry 3 }
snIpxIfRipAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxIfRipAccessEntry 4 }
-- IPX IF SAP Access table
snIpxIfSapAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxIfSapAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX IF RIP Access table."
::= { snIpxIfSapAccess 1 }
snIpxIfSapAccessEntry OBJECT-TYPE
SYNTAX SnIpxIfSapAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Access table."
INDEX { snIpxIfSapAccessPort, snIpxIfSapAccessDir }
::= { snIpxIfSapAccessTable 1 }
SnIpxIfSapAccessEntry ::= SEQUENCE {
snIpxIfSapAccessPort
INTEGER,
snIpxIfSapAccessDir
INTEGER,
snIpxIfSapAccessFilterList
OCTET STRING,
snIpxIfSapAccessRowStatus
INTEGER
}
snIpxIfSapAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX interface to which the SAP Filter applies."
::= { snIpxIfSapAccessEntry 1 }
snIpxIfSapAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snIpxIfSapAccessEntry 2 }
snIpxIfSapAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX IF SAP Access Filter List."
::= { snIpxIfSapAccessEntry 3 }
snIpxIfSapAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxIfSapAccessEntry 4 }
-- ipx interface address table
snIpxPortAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxPortAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX port address table."
::= { snIpxPortAddr 1 }
snIpxPortAddrEntry OBJECT-TYPE
SYNTAX SnIpxPortAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Port Address table."
INDEX { snIpxPortAddrPort, snIpxPortAddrEncap }
::= { snIpxPortAddrTable 1 }
SnIpxPortAddrEntry ::= SEQUENCE {
snIpxPortAddrPort
PortIndex,
snIpxPortAddrEncap
INTEGER,
snIpxPortAddrNetNum
NetNumber,
snIpxPortAddrRowStatus
INTEGER,
snIpxPortAddrNetBiosFilterMode
RtrStatus
}
snIpxPortAddrPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for port address entry."
::= { snIpxPortAddrEntry 1 }
snIpxPortAddrEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet8022(1),
ethernet8023(2),
ethernetII(3),
ethernetSnap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX encapsulation type.
ethernet8022(1), ethernet8023(2),
ethernetII(3), ethernetSnap(4)
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned."
::= { snIpxPortAddrEntry 2 }
snIpxPortAddrNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An unique Network number for the IPX interface port."
::= { snIpxPortAddrEntry 3 }
snIpxPortAddrRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxPortAddrEntry 4 }
snIpxPortAddrNetBiosFilterMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/Disabled NetBios Filter Mode status per Port Address entry."
::= { snIpxPortAddrEntry 5 }
-- ipx port counters table
snIpxPortCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxPortCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX port Counters table."
::= { snIpxPortCounters 1 }
snIpxPortCountersEntry OBJECT-TYPE
SYNTAX SnIpxPortCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Port Counters table."
INDEX { snIpxPortCountersPort }
::= { snIpxPortCountersTable 1 }
SnIpxPortCountersEntry ::= SEQUENCE {
snIpxPortCountersPort
PortIndex,
snIpxPortCountersRcvPktsCnt
Counter,
snIpxPortCountersTxPktsCnt
Counter,
snIpxPortCountersFwdPktsCnt
Counter,
snIpxPortCountersRcvDropPktsCnt
Counter,
snIpxPortCountersTxDropPktsCnt
Counter,
snIpxPortCountersRcvFiltPktsCnt
Counter,
snIpxPortCountersTxFiltPktsCnt
Counter
}
snIpxPortCountersPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for port Counters entry."
::= { snIpxPortCountersEntry 1 }
snIpxPortCountersRcvPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX incoming packets counter for the interface."
::= { snIpxPortCountersEntry 2 }
snIpxPortCountersTxPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Outgoing packets counter for the interface."
::= { snIpxPortCountersEntry 3 }
snIpxPortCountersFwdPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX forwarding packets counter for the interface."
::= { snIpxPortCountersEntry 4 }
snIpxPortCountersRcvDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving drop packets counter for the interface."
::= { snIpxPortCountersEntry 5 }
snIpxPortCountersTxDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting drop packets counter for the interface."
::= { snIpxPortCountersEntry 6 }
snIpxPortCountersRcvFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving filter packets counter for the interface."
::= { snIpxPortCountersEntry 7 }
snIpxPortCountersTxFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting filter packets counter for the interface."
::= { snIpxPortCountersEntry 8 }
END