mibs/MIBS/hp/HP-SYSTEM-MIB

538 lines
18 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
HP-SYSTEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Gauge32, IpAddress,
NOTIFICATION-TYPE, Unsigned32,
Integer32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue,
DisplayString FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
hpProcurveCommon FROM HP-BASE-MIB;
hpProcurveSystem MODULE-IDENTITY
LAST-UPDATED "200502011455Z"
ORGANIZATION "Hewlett Packard Company,
ProCurve Networking Business"
CONTACT-INFO "Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION "This MIB module describes objects for basic
management of devices in the HP Procurve
product line."
REVISION "200502011455Z" -- February 1, 2005
DESCRIPTION "Modified to reflect new OID hierarchy for
HP J8162A XL Access Controller Module."
::= { hpProcurveCommon 1 }
hpProcurveSysMib OBJECT IDENTIFIER ::= { hpProcurveSystem 1 }
hpSystemMIBObjects OBJECT IDENTIFIER ::= { hpProcurveSystem 2 }
hpConfig OBJECT IDENTIFIER ::= { hpSystemMIBObjects 1 }
hpStatus OBJECT IDENTIFIER ::= { hpSystemMIBObjects 2 }
hpNotificationsConfig OBJECT IDENTIFIER ::= { hpSystemMIBObjects 3 }
-- System objects
hpProductDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Textual Description of the HW product"
::= { hpProcurveSysMib 1 }
hpProductHWVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HW version of the product"
::= { hpProcurveSysMib 2 }
hpProductSWVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SW version of the product"
::= { hpProcurveSysMib 3 }
hpProductSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number of the product"
::= { hpProcurveSysMib 4 }
hpProductLastChange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Date and time of last configuration change"
::= { hpProcurveSysMib 5 }
-- Environmental
hpCpuTemperature OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current temperature in degrees centigrade
of the CPU."
::= { hpProcurveSysMib 6 }
hpPowerSupplyTemperature OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "Current temperature in degrees centigrade
of the power supply."
::= { hpProcurveSysMib 7 }
hpChassisTemperature OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current temperature in degrees centigrade
of the mother board. Note: this is not the
ambient temperature of the box."
::= { hpProcurveSysMib 8 }
hpFanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of operational status of all internal
cooling fans."
::= { hpProcurveSysMib 9 }
hpFanStatusEntry OBJECT-TYPE
SYNTAX HpFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry in table of all internal cooling fans."
INDEX { hpFanNumber }
::= { hpFanStatusTable 1 }
HpFanStatusEntry ::=
SEQUENCE {
hpFanNumber INTEGER,
hpFanOperational INTEGER,
hpFanSpeed Integer32
}
hpFanNumber OBJECT-TYPE
SYNTAX INTEGER { cpu(1),power(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of cooling fan, numbered to represent what
hardware the fan is supposed to be cooling."
::= { hpFanStatusEntry 1 }
hpFanOperational OBJECT-TYPE
SYNTAX INTEGER { true(1),false(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational status of a cooling fan."
::= { hpFanStatusEntry 2 }
hpFanSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Speed of the fan in RPM."
::= { hpFanStatusEntry 3 }
-- hpConfig group
-- Additional information relating to the configuration of the HP ProCurve Networking
-- Business Device
hpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing information about the
device. For instance, this string reflects the setting of
the HP J8162A XL Access Controller Module Name available on the Administrative
Web based User Interface. If no HP J8162A XL Access Controller Module name
is entered, this object contains a zero-length string."
::= { hpConfig 2 }
hpSystemID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique identifier for this device, as used by
this system, or a master controlling system. For instance, an
HP J8162A XL Access Controller Module would report the systemID used by the
Access Control Server 740wl to uniquely identify this device."
::= { hpConfig 3 }
hpState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
up(2), -- ready to pass packets
down(3),
primary(4), -- for Failover operation
secondary(5) -- for Failover operation
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the device. A HP ProCurve Networking Business
device can be configured for standalone operation,
Failover (ie with a redundant peer), or for Distribution
of configuration from a controlling central system to
remote entities.
unknown(1) - system Configuration status unknown
up(2) - a standalone system is operational.
down(3) - a system is not operational.
primary(4) - system is running as the primary in
a Failover peer configuration.
secondary(5) - system is running as the backup in
a Failover peer configuration."
::= { hpConfig 4 }
hpDistributionType OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
SYNTAX INTEGER {
unknown(1),
rightsPush(2) -- push central rights to remote systems.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The most recent distribution event type on a device.
This object will change dynamically based on
the most recently triggered distribution event.
unknown(1) - the distribution event type
none(2) - no distribution event has occurred
rightsPush(3) - the central Access Control Server 740wl
has triggered a rights push event to remote Access Control Server
740wls."
::= { hpConfig 5 }
hpDistributionStatus OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
SYNTAX INTEGER {
unknown(1),
succeeded(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The most recent distribution event on a device.
This object will change dynamically based on
the most recently triggered distribution event.
unknown(1) - the distribution event status unknown
succeeded(2) - no distribution event has succeeded
failed(3) - the distribution event failed for some reason."
::= { hpConfig 6 }
hpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned IP address associated with the
device. This can be assigned statically on the
device Console port, or configured via DHCP."
::= { hpConfig 7 }
hpPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned IP address associated with a
redundant peer device, configured to work with this device
for failover purposes. This can be assigned statically on the
device Console port, or configured via DHCP. If the device
does not support Failover configuration, or none has been
configured, this object will report 0.0.0.0"
::= { hpConfig 8 }
hpTechSupportEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current setting for the technical
support access to the device. A value of true(1)
indicates the Technical Support Access has been enabled. A value
of false(2) indicates this access has been disabled. Note
this object should only report true(2) if HP ProCurve Networking
Business Technical Support staff have requested this access
to the HP J8162A XL Access Controller Module for troubleshooting purposes."
DEFVAL { false }
::= { hpConfig 9 }
hpFailedAdminIpAddress OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address associated with the last failed
authentication to the Administrative UI. If no Administrator
had failed authentication, this object will report 0.0.0.0"
::= { hpConfig 10 }
-- hpStatus
hpNumAccessControllers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HP J8162A XL Access Controller Modules known to this system.
If this system is an HP J8162A XL Access Controller Module, this value will be 1.
Otherwise, this value will be the number of HP J8162A XL Access Controller Modules
this system is connected to (i.e. An Access Control Server 740wl
connects to multiple HP J8162A XL Access Controller Module's)."
::= { hpStatus 1 }
hpNumClients OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of active authenticated or unauthenticated
clients known to this system. If this device is an
HP J8162A XL Access Controller Module, then this object reports
the aggregated number of clients across all ports. If this device
is a Access Control Server 740wl, it reports all Clients aggregated
across all HP J8162A XL Access Controller Modules known to this system."
::= { hpStatus 2 }
-- hpNotificationsConfig group
-- Configure system level notifications
hpFailoverNotificationEnabled OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether a hpFailover notification will
be sent in the event of a failover occurrence between a primary
and standby system. By default this object is set to false(2)
for all systems."
::= { hpNotificationsConfig 1 }
hpDistributionNotificationEnabled OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether a hpDistribution notification will
be sent in the event of a distribution event between a central
and remote systems. By default this object is set to false(2)
for all systems."
DEFVAL { false }
::= { hpNotificationsConfig 2 }
hpAdminAuthFailureNotificationEnabled OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether a hpAdminAuthFailure
notification will be sent in the event of a failed
authentication attempt at the administrator login."
DEFVAL { false }
::= { hpNotificationsConfig 3 }
-- Traps
hpSystemTraps OBJECT IDENTIFIER ::= { hpProcurveSystem 0 }
fanDown NOTIFICATION-TYPE
OBJECTS { hpFanNumber }
STATUS current
DESCRIPTION "A fanDown trap signifies that hpFanOperational has
detected an event where the fan is not operating."
::= { hpSystemTraps 1 }
fanUp NOTIFICATION-TYPE
OBJECTS { hpFanNumber }
STATUS current
DESCRIPTION "A fanUp trap signifies that hpFanOperational has
detected an event where the fan is now operating."
::= { hpSystemTraps 2 }
temperatureAlarm NOTIFICATION-TYPE
OBJECTS { hpCpuTemperature }
STATUS current
DESCRIPTION "A temperatureAlarm signifies that the SNMP
entity, acting in an agent role, has detected that the
hpCpuTemperature has a value that exceeds acceptable
tolerances (i.e. it is too hot or too cold)."
::= { hpSystemTraps 3 }
hpFailover NOTIFICATION-TYPE
OBJECTS { hpIpAddress}
STATUS current
DESCRIPTION
"A hpFailover signifies that the SNMP
entity, acting in an agent role, has detected that the
standby system in a primary, redundant operation has
become the primary system. This notification will only
be sent by what was formerly the standby system."
::= { hpSystemTraps 4 }
hpDistributionEvent NOTIFICATION-TYPE
-- NOT CURRENTLY SUPPORTED
OBJECTS { hpDistributionType, hpDistributionStatus}
STATUS current
DESCRIPTION
"A hpDistributionEvent signifies that the SNMP
entity, acting in an agent role, has detected that the
central entity in a distributed system has triggered a
distribution event of hpDistributionType."
::= { hpSystemTraps 5 }
hpAdminAuthFailure NOTIFICATION-TYPE
-- NOT CURRENTLY SUPPORTED
OBJECTS { hpFailedAdminIpAddress}
STATUS current
DESCRIPTION
"A hpAdminAuthFailure signifies that the SNMP
entity, acting in an agent role, has detected that
someone at the address reported by hpAdminIpAddress
has failed to authenticate to the device via
the administrative interface."
::= { hpSystemTraps 6 }
-- conformance information
hpSystemMIBConformance OBJECT IDENTIFIER ::= { hpProcurveSystem 3 }
hpCompliances OBJECT IDENTIFIER ::= { hpSystemMIBConformance 1 }
hpGroups OBJECT IDENTIFIER ::= { hpSystemMIBConformance 2 }
hpSystemMIBCompliance1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the HP-SYSTEM-MIB."
MODULE -- this module
MANDATORY-GROUPS { hpSystemGroup, hpConfigGroup }
GROUP hpEnvGroup
DESCRIPTION
"The hpEnvGroup is optional for all entities."
GROUP hpStatusGroup
DESCRIPTION
"The hpStatusGroup is optional for all entities."
GROUP hpNotificationsConfigGroup
DESCRIPTION
"The hpNotificationsConfigGroup is optional for all entities."
GROUP hpNotificationsGroup
DESCRIPTION
"The hpNotificationsGroup is optional for all entities."
OBJECT hpName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT hpIpAddress
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT hpTechSupportEnabled
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT hpFailoverNotificationEnabled
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT hpDistributionNotificationEnabled
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT hpAdminAuthFailureNotificationEnabled
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { hpCompliances 1 }
-- units of conformance
hpSystemGroup OBJECT-GROUP
OBJECTS { hpProductDescription, hpProductHWVersion, hpProductSWVersion,
hpProductSerialNumber, hpProductLastChange }
STATUS current
DESCRIPTION
"A collection of objects providing system information
applicable to all devices."
::= { hpGroups 1 }
hpEnvGroup OBJECT-GROUP
OBJECTS { hpCpuTemperature, hpPowerSupplyTemperature, hpChassisTemperature,
hpFanNumber, hpFanOperational, hpFanSpeed }
STATUS current
DESCRIPTION
"A collection of objects providing environmental information
applicable to all devices."
::= { hpGroups 2 }
hpConfigGroup OBJECT-GROUP
OBJECTS { hpName, hpSystemID, hpState, hpIpAddress, hpPeerIpAddress,
hpTechSupportEnabled, hpDistributionType, hpDistributionStatus,
hpFailedAdminIpAddress }
STATUS current
DESCRIPTION
"A collection of objects providing configuration information
applicable to all devices."
::= { hpGroups 3 }
hpStatusGroup OBJECT-GROUP
OBJECTS { hpNumAccessControllers, hpNumClients }
STATUS current
DESCRIPTION
"A collection of objects providing statistics
applicable to all HP J8162A XL Access Controller Module like devices."
::= { hpGroups 4 }
hpNotificationsConfigGroup OBJECT-GROUP
OBJECTS { hpFailoverNotificationEnabled,
hpDistributionNotificationEnabled,
hpAdminAuthFailureNotificationEnabled }
STATUS current
DESCRIPTION
"A collection of objects providing notification configuration
information applicable to all devices."
::= { hpGroups 5 }
hpNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { fanDown, fanUp, temperatureAlarm,
hpFailover, hpDistributionEvent, hpAdminAuthFailure }
STATUS current
DESCRIPTION
"notifications for primary failover, and authorization failures,
applicable to all devices."
::= { hpGroups 6 }
END