mibs/MIBS/ibm/IBM-LAN-EMULATION-EXTENSION-MIB

-- MIB created 5/06/99 21:05:47, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

IBM-LAN-EMULATION-EXTENSION-MIB DEFINITIONS ::= BEGIN

-- From file: "ibmlanex.mi2"
-- Compile options "G A T M"

IMPORTS
    Gauge32, Integer32, Counter32, TimeTicks, IpAddress
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    RowStatus, DisplayString, MacAddress, TimeStamp
            FROM SNMPv2-TC-v1
    enterprises
            FROM RFC1155-SMI
    lesConfEntry
            FROM LAN-EMULATION-LES-MIB
    IfIndexOrZero
            FROM LAN-EMULATION-ELAN-MIB
    BridgeId, Timeout
            FROM BRIDGE-MIB;

lanEmulation OBJECT IDENTIFIER ::= { ibmArchitecture 8 }
-- MODULE-IDENTITY
--  LastUpdated
--    9804091200Z
--  OrgName
--    IBM Corporation
--  ContactInfo
--     Florian K Kandefer
--       Postal:  IBM Corporation
--                800 Park Offices Drive
--                Research Triangle Park, NC 27709
--                US
--       Tel:     +1 919 254 0685
--       Fax:     +1 919 254 0391
--       E-mail:  kandefer@vnet.ibm.com     
--  Descr
--    
--    This MIB module contains definitions for common IBM LAN
--    Emulation Server and Client implementations.
--  RevDate
--    9804091200Z
--  RevDescr
--    
--    Added enumerations to IbmVlanType for by port vlans and
--    IP Multicast vlans.
--  RevDate
--    9711051200Z
--  RevDescr
--    
--    The following changes have been made for this revision
--    
--    1) VLAN MIB has been added
--    2) Super ELAN MIB has been added with the exception
--       of the ibmSEPortStatisticsTable which existed in original MIB.
--       However, ibmSEPortStatisticsTable has been updated.
--    3) deprecated ibmBbcmConfigNextId, the ibmBbcmConfigIndex
--       will take on the value of the superElanID.
--  RevDate
--    9705221200Z
--  RevDescr
--    
--    Changed ibmLeServerXLesConfigEntry to be an augment of
--    lesConfEntry and removed ibmLeServerXLesConfigIndex.
--  RevDate
--    9701211200Z
--  RevDescr
--    
--    The  creation

ibm             OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
ibmLeServerX    OBJECT IDENTIFIER ::= { lanEmulation 3 }
ibmLeClientX    OBJECT IDENTIFIER ::= { lanEmulation 4 }
ibmLeMIBConformance OBJECT IDENTIFIER ::= { lanEmulation 5 }
ibmLeServerXMonitoring OBJECT IDENTIFIER ::= { ibmLeServerX 1 }
ibmLeServerXConfig OBJECT IDENTIFIER ::= { ibmLeServerX 2 }
ibmLeServerXMon OBJECT IDENTIFIER ::= { ibmLeServerXMonitoring 1 }
ibmSuperELAN    OBJECT IDENTIFIER ::= { ibmLeClientX 1 }
ibmBbcmMIB      OBJECT IDENTIFIER ::= { ibmLeClientX 2 }
ibmBbcmConfigGroup OBJECT IDENTIFIER ::= { ibmBbcmMIB 1 }
ibmBbcmStatsGroup OBJECT IDENTIFIER ::= { ibmBbcmMIB 2 }
ibmVlan         OBJECT IDENTIFIER ::= { ibmLeClientX 3 }
ibmVlanGGroup   OBJECT IDENTIFIER ::= { ibmVlan 1 }
ibmVlanGOGroup  OBJECT IDENTIFIER ::= { ibmVlanGGroup 1 }
ibmVlanCGroup   OBJECT IDENTIFIER ::= { ibmVlan 2 }
ibmVlanConfGroup OBJECT IDENTIFIER ::= { ibmVlanCGroup 1 }
ibmVlanStatusGroup OBJECT IDENTIFIER ::= { ibmVlan 3 }
ibmLeMIBGroups  OBJECT IDENTIFIER ::= { ibmLeMIBConformance 1 }
ibmLeMIBCompliances OBJECT IDENTIFIER ::= { ibmLeMIBConformance 2 }

IbmSEBridgeID ::= INTEGER(1..65535)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    
--    This is a unique identifier associated with the Super ELAN Bridge (SEB).
--    For SEB's spanning multiple devices, the SEB ID must be
--    consistent because it is propagated in the spanning tree BPDUs.
--    The SEB name has only local significance and need not be the
--    same for every device participating in the Super ELAN. The valid
--    range for SEB IDs is from 1 to 65279 (0xFEFF). The range
--    of ID's from 65280 to 65535 are reserved for non SEB's.
--    An ID of 65535 is reserved for the base bridge, a single non SEB.

IbmVlanPortMap ::= OCTET STRING(SIZE(1..65535))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    
--    The VLAN Port Map provides the bridge port mapping for a
--    specific VLAN definition. In the map each bit of each octet
--    provides the definition for a given port.
--    That is the first octet defines the first eight ports
--    of the bridge, the second octet defines the second
--    eight ports of the bridge and so on and so on and so on.
--    
--    Note that bit 0 of octet 1 should never be set because
--    bridges have no concept of port 0.
--    
--    ibmVlanMaxPortMap defines the maximum number of octets supported
--    in any of the PortMap objects, for this version of the agent.

IbmVlanIndex ::= Integer32
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    
--    A value which uniquely identifies a conceptual row in the various
--    VLAN tables. The VlanIndex is used to correlate table information
--    pertaining to that same VLAN instance in the various VLAN tables.
--    
--    This index is unique across all bridge instances.

IbmVlanType ::= INTEGER {
        ip(1),
        ipx(2),
        netbios(3),
        userDefSldWindo(4),
        mac(5),
        byPort(6),
        ipMulticast(7)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    
--    A value which uniquely identifies the type of VLAN.
--    

ibmLeServerXMonLecsInstances OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LECS instances currently created on this agent."
    ::= { ibmLeServerXMon 1 }

ibmLeServerXMonLesInstances OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LES instances currently created on this agent."
    ::= { ibmLeServerXMon 2 }

ibmLeServerXMonBusInstances OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of BUS instances currently created on this agent."
    ::= { ibmLeServerXMon 3 }

ibmLeServerXLecsMonTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmLeServerXLecsMonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides monitoring of LECS instances."
    ::= { ibmLeServerXMonitoring 2 }

ibmLeServerXLecsMonEntry OBJECT-TYPE
    SYNTAX IbmLeServerXLecsMonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entries of ibmLeServerXLecsMonTable."
    INDEX { ibmLeServerXLecsMonIndex }
    ::= { ibmLeServerXLecsMonTable 1 }

IbmLeServerXLecsMonEntry ::= SEQUENCE {
    ibmLeServerXLecsMonIndex Integer32,
    ibmLeServerXLecsUsedConnections Gauge32
    }

ibmLeServerXLecsMonIndex OBJECT-TYPE
    SYNTAX Integer32(0..214748364)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The index used to identify this LECS instance on
         this agent. This variable has the same value as
         the lecsConfIndex used to identify this instance
         in the LECS MIB."
    REFERENCE
        "LAN-EMULATION-ELAN-MIB for definition of lecsConfIndex"
    ::= { ibmLeServerXLecsMonEntry 1 }

ibmLeServerXLecsUsedConnections OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of virtual connections currently
         in use by this LECS instance."
    ::= { ibmLeServerXLecsMonEntry 2 }

ibmLeServerXLesMonTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmLeServerXLesMonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides monitoring of LES instances."
    ::= { ibmLeServerXMonitoring 3 }

ibmLeServerXLesMonEntry OBJECT-TYPE
    SYNTAX IbmLeServerXLesMonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entries of ibmLeServerXLesMonTable."
    INDEX { ibmLeServerXLesMonIndex }
    ::= { ibmLeServerXLesMonTable 1 }

IbmLeServerXLesMonEntry ::= SEQUENCE {
    ibmLeServerXLesMonIndex Integer32,
    ibmLeServerXLesMonUsedConnections Gauge32,
    ibmLeServerXLesMonLesLecInstances Gauge32
    }

ibmLeServerXLesMonIndex OBJECT-TYPE
    SYNTAX Integer32(0..214748364)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The index used to identify this LES instance on
         this agent. This variable has the same value as
         the lesConfIndex used to identify this instance
         in the LES MIB."
    REFERENCE
        "LAN-EMULATION-LES-MIB for definition of lesConfIndex"
    ::= { ibmLeServerXLesMonEntry 1 }

ibmLeServerXLesMonUsedConnections OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of virtual connections currently
         in use by this LES instance."
    ::= { ibmLeServerXLesMonEntry 2 }

ibmLeServerXLesMonLesLecInstances OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of clients currently served by this
         LES instance. This is the number of entries in the
         lesLecTable which have successfully joined this
         LES instance."
    REFERENCE
        "LAN-EMULATION-LES-MIB for definition of lesLecTable"
    ::= { ibmLeServerXLesMonEntry 3 }

ibmLeServerXBusMonTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmLeServerXBusMonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides monitoring of BUS instances."
    ::= { ibmLeServerXMonitoring 4 }

ibmLeServerXBusMonEntry OBJECT-TYPE
    SYNTAX IbmLeServerXBusMonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entries of ibmLeServerXBusMonTable."
    INDEX { ibmLeServerXBusMonIndex }
    ::= { ibmLeServerXBusMonTable 1 }

IbmLeServerXBusMonEntry ::= SEQUENCE {
    ibmLeServerXBusMonIndex Integer32,
    ibmLeServerXBusMonUsedConnections Gauge32,
    ibmLeServerXBusMonBusLecInstances Gauge32
    }

ibmLeServerXBusMonIndex OBJECT-TYPE
    SYNTAX Integer32(0..214748364)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The index used to identify this BUS instance on
         this agent. This variable has the same value as
         the busConfIndex used to identify this instance
         in the BUS MIB."
    REFERENCE
        "LAN-EMULATION-BUS-MIB for definition of busConfIndex"
    ::= { ibmLeServerXBusMonEntry 1 }

ibmLeServerXBusMonUsedConnections OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of virtual connections currently
         in use by this BUS instance."
    ::= { ibmLeServerXBusMonEntry 2 }

ibmLeServerXBusMonBusLecInstances OBJECT-TYPE
    SYNTAX Gauge32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of clients currently served by this
         BUS instance. This is the number of entries in the
         busLecTable."
    REFERENCE
        "LAN-EMULATION-BUS-MIB for definition of busLecTable"
    ::= { ibmLeServerXBusMonEntry 3 }

ibmLeServerXLesConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmLeServerXLesConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table provides extension for LES configuration."
    ::= { ibmLeServerXConfig 1 }

ibmLeServerXLesConfigEntry OBJECT-TYPE
    SYNTAX IbmLeServerXLesConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Entries of ibmLeServerXLesConfigTable."
    INDEX { lesConfIndex }
-- Augments lesConfEntry FROM LAN-EMULATION-LES-MIB
    ::= { ibmLeServerXLesConfigTable 1 }

IbmLeServerXLesConfigEntry ::= SEQUENCE {
    ibmLeServerXLesMinLecID Integer32,
    ibmLeServerXLesMaxLecID Integer32
    }

ibmLeServerXLesMinLecID OBJECT-TYPE
    SYNTAX Integer32(1..65279)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The minimum number on the LEC ID range in use by
         by this LES instance. The default value is 1
         the first possible LEC ID. "
    DEFVAL { 1 }
    ::= { ibmLeServerXLesConfigEntry 1 }

ibmLeServerXLesMaxLecID OBJECT-TYPE
    SYNTAX Integer32(1..65279)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The maximum number on the LEC ID range in use by
         by this LES instance. The default value is 65279
         the last possible LEC ID. "
    DEFVAL { 65279 }
    ::= { ibmLeServerXLesConfigEntry 2 }

ibmSEPortStatisticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmSEPortStatisticsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains statistics about LAN Emulation
         Control Frame Statistics for Super ELAN Bridge ports."
    ::= { ibmSuperELAN 1 }

ibmSEPortStatisticsEntry OBJECT-TYPE
    SYNTAX IbmSEPortStatisticsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of LE Control Frame statistical information
        for each SEB port"
    INDEX { ibmSEBridgeId, ibmSEPortNum }
    ::= { ibmSEPortStatisticsTable 1 }

IbmSEPortStatisticsEntry ::= SEQUENCE {
    ibmSEBridgeId IbmSEBridgeID,
    ibmSEPortNum INTEGER,
    ibmSEPortArpRequestsIn Counter32,
    ibmSEPortArpRequestsOut Counter32,
    ibmSEArpRequestsErrors Counter32,
    ibmSEPortArpRequestsDroppedPortBlocked Counter32,
    ibmSEPortArpRequestsFiltered Counter32,
    ibmSEPortArpRepliesIn Counter32,
    ibmSEPortArpRepliesOut Counter32,
    ibmSEPortArpRepliesErrors Counter32,
    ibmSEPortNarpRequestsIn Counter32,
    ibmSEPortNarpRequestsOut Counter32,
    ibmSEPortNarpRequestsDroppedPortBlocked Counter32,
    ibmSEPortFlushRequestsIn Counter32,
    ibmSEPortFlushRequestsOut Counter32,
    ibmSEPortFlushRepliesIn Counter32,
    ibmSEPortFlushRepliesOut Counter32,
    ibmSEPortFlushRequestErrors Counter32,
    ibmSEPortFlushRepliesErrors Counter32,
    ibmSEPortLeCtrlFramesIn Counter32,
    ibmSEPortLeCtrlFramesOut Counter32,
    ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd Counter32,
    ibmSEPortLeCtrlFramesDiscDestPortNotFwrd Counter32
    }

ibmSEBridgeId OBJECT-TYPE
    SYNTAX IbmSEBridgeID
--    Rsyntax INTEGER(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The identifier of the Super ELAN Bridge which
         this LAN Emulation Client has joined."
    ::= { ibmSEPortStatisticsEntry 1 }

ibmSEPortNum OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The bridge port number associated with this
         Super ELAN Bridge LAN Emulation Client.
         This variable directly corresponds, is equal to, the
         dot1dBasePort variable in rfc1493."
    ::= { ibmSEPortStatisticsEntry 2 }

ibmSEPortArpRequestsIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LE ARP Requests received by the
         SEB port."
    ::= { ibmSEPortStatisticsEntry 3 }

ibmSEPortArpRequestsOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE ARP Requests transmitted
         by the SEB port."
    ::= { ibmSEPortStatisticsEntry 4 }

ibmSEArpRequestsErrors OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of received LE ARP Requests that were not
         bridged by the SEB port"
    ::= { ibmSEPortStatisticsEntry 5 }

ibmSEPortArpRequestsDroppedPortBlocked OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS obsolete
    DESCRIPTION
        "The number of outgoing ARP Requests that were dropped
         by the SEB port because the port was in
         the blocking state."
    REFERENCE
        "rfc1493: dot1dStpPortState"
    ::= { ibmSEPortStatisticsEntry 6 }

ibmSEPortArpRequestsFiltered OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of received LE ARP Requests discarded by the
         SEB port because the target MAC address in
         the LE ARP Request was filtered by the bridge."
    ::= { ibmSEPortStatisticsEntry 7 }

ibmSEPortArpRepliesIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LE ARP Responses received by the
         SEB port."
    ::= { ibmSEPortStatisticsEntry 8 }

ibmSEPortArpRepliesOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE ARP Responses transmitted
         by the SEB port."
    ::= { ibmSEPortStatisticsEntry 9 }

ibmSEPortArpRepliesErrors OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of received LE ARP Responses that were
         dropped by the SEB port because the
         SEB port originating the corresponding
         LE ARP Request could not be determined."
    ::= { ibmSEPortStatisticsEntry 10 }

ibmSEPortNarpRequestsIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LE NARP Requests received by the
         SEB port."
    ::= { ibmSEPortStatisticsEntry 11 }

ibmSEPortNarpRequestsOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE NARP Requests transmitted
         by the SEB port."
    ::= { ibmSEPortStatisticsEntry 12 }

ibmSEPortNarpRequestsDroppedPortBlocked OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS obsolete
    DESCRIPTION
        "The number of bridged LE NARP Requests that were
         dropped by the SEB port because the port
         was in the blocking state."
    REFERENCE
        "rfc1493: dot1dStpPortState"
    ::= { ibmSEPortStatisticsEntry 13 }

ibmSEPortFlushRequestsIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LE Flush Requests received by
         the SEB port."
    ::= { ibmSEPortStatisticsEntry 14 }

ibmSEPortFlushRequestsOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE Flush Requests transmitted
         by the SEB port."
    ::= { ibmSEPortStatisticsEntry 15 }

ibmSEPortFlushRepliesIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of LE Flush Responses received by the
         SEB port."
    ::= { ibmSEPortStatisticsEntry 16 }

ibmSEPortFlushRepliesOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE Flush Responses transmitted
         by the SEB port."
    ::= { ibmSEPortStatisticsEntry 17 }

ibmSEPortFlushRequestErrors OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE Flush Request Errors for this
        SEB port."
    ::= { ibmSEPortStatisticsEntry 18 }

ibmSEPortFlushRepliesErrors OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of bridged LE Flush Replies Errors for this
        SEB port."
    ::= { ibmSEPortStatisticsEntry 19 }

ibmSEPortLeCtrlFramesIn OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of LE Control frames received by the
         SEB port."
    ::= { ibmSEPortStatisticsEntry 20 }

ibmSEPortLeCtrlFramesOut OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of LE Control frames transmitted
         by the SEB port."
    ::= { ibmSEPortStatisticsEntry 21 }

ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of LE Control frames discarded
         because the SEB source port is not forwarding."
    ::= { ibmSEPortStatisticsEntry 22 }

ibmSEPortLeCtrlFramesDiscDestPortNotFwrd OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of LE Control frames discarded
         because the SEB destination port is not forwarding."
    ::= { ibmSEPortStatisticsEntry 23 }

ibmSEBridgeConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmSEBridgeConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table that contains the Super ELAN Bridge (SEB) Configuration."
    ::= { ibmSuperELAN 2 }

ibmSEBridgeConfigEntry OBJECT-TYPE
    SYNTAX IbmSEBridgeConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The configuration information for each Super ELAN Bridge instance"
    INDEX { ibmSEBridgeId }
    ::= { ibmSEBridgeConfigTable 1 }

IbmSEBridgeConfigEntry ::= SEQUENCE {
    ibmSEAtmIfNumber IfIndexOrZero,
    ibmSEEnabled INTEGER,
    ibmSEName DisplayString,
    ibmSEFrameSize INTEGER,
    ibmSEMacCacheAge INTEGER,
    ibmSERDCacheAge INTEGER,
    ibmSEPriority INTEGER,
    ibmSEMaxAge INTEGER,
    ibmSEBridgeHelloTime INTEGER,
    ibmSEBridgeForwardDelay INTEGER,
    ibmSEBridgeAddress MacAddress,
    ibmSEType INTEGER,
    ibmSEConfigRowStatus RowStatus
    }

ibmSEAtmIfNumber OBJECT-TYPE
    SYNTAX IfIndexOrZero
--    Rsyntax INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The ATM interface number the Super ELAN (SE) bridging function
        is associated with. This number is used to determine the NETWORK ID.
        A SE Bridge (SEB) may span ATM adapters but they have to
        be on the same network, as specified by the Network ID.
        The specific requirement is that the LECs in the Super ELAN
        can establish a Data Direct VCC.
        
        The Network ID is an ATM configuration parameter that is required
        to allow Data Direct VCC's to be established.
        
        The value of this object must match an existing value in the ifTable.
        This object is set to zero when the ATM interface is not
        specified and the agent must determine itself which ATM
        interface it is to use. If the agent can not determine a
        default ATM interface an error should be returned by the
        agent."
    DEFVAL { 0 }
    ::= { ibmSEBridgeConfigEntry 1 }

ibmSEEnabled OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        When enabled(1) the SE Bridge (SEB) will bridge frames to the
        ports defined  in its bridging domain.  When disabled(2) the SEB
        will not bridge frames."
    DEFVAL { enabled }
    ::= { ibmSEBridgeConfigEntry 2 }

ibmSEName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..32))
--    Rsyntax OCTET STRING(SIZE(1..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This is a user provided name to associate with the SEB.
        The SEB name is independent of the ELANs names of the
        constituent ELANs of the SEB.
        
        No default, name must be specified."
    ::= { ibmSEBridgeConfigEntry 3 }

ibmSEFrameSize OBJECT-TYPE
    SYNTAX INTEGER {
        en1516(1516),
        tr4544(4544),
        tr9234(9234),
        tr18190(18190)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        Indicates the maximum SuperElan frame size. All ELANs in a
        single SEB must be set to the same maximum frame size.
        
        Valid Values 1516, 4544, 9234, 18190
        
        Default for Ethernet 1516, the Default for Token Ring is 4544
        
        Since ibmSEType defaults to Token Ring the MIB documents
        the ibmSEFrameSize DEFVAL to be 4544. However, if on row creation
        ibmSEType is set to Ethernet sebEN(1), and ibmSEFrameSize
        is not specified, the default value used by the agent should be
        1516."
    DEFVAL { tr4544 }
    ::= { ibmSEBridgeConfigEntry 4 }

ibmSEMacCacheAge OBJECT-TYPE
    SYNTAX INTEGER(10..1000000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The number of seconds a learned MAC address remains in the
        data frame forwarding cache without revalidation."
    DEFVAL { 300 }
    ::= { ibmSEBridgeConfigEntry 5 }

ibmSERDCacheAge OBJECT-TYPE
    SYNTAX INTEGER(10..1000000)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The number of seconds a learned route descriptor remains in the
        data frame forwarding cache without revalidation."
    DEFVAL { 1800 }
    ::= { ibmSEBridgeConfigEntry 6 }

ibmSEPriority OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The SuperElan Bridge spanning tree priority.
        A lower value will increase the likelihood of a SuperElan
        bridge becoming the root. This value is appended to the
        SuperElan Spanning Tree MAC Address to form a SuperElan
        Bridge ID."
    DEFVAL { 32768 }
    ::= { ibmSEBridgeConfigEntry 7 }

ibmSEMaxAge OBJECT-TYPE
    SYNTAX INTEGER(6..40)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The age at which the current Spanning Tree configuration is
        deemed too old. A value to small may cause the spanning tree to
        unnecessarily reconfigure. A value to large will increase the
        time it takes for the spanning tree to form once an outage
        is detected."
    DEFVAL { 20 }
    ::= { ibmSEBridgeConfigEntry 8 }

ibmSEBridgeHelloTime OBJECT-TYPE
    SYNTAX INTEGER(1..10)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The interval of time in seconds between the generation of
        Spanning Tree configuration messages generate by the root.
        Lower values increase the spanning tree robustness, but
        increase network traffic overhead. Higher values decrease
        network control traffic but decrease spanning tree robustness."
    DEFVAL { 2 }
    ::= { ibmSEBridgeConfigEntry 9 }

ibmSEBridgeForwardDelay OBJECT-TYPE
    SYNTAX INTEGER(4..30)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The delay in seconds that the SEB waits before
        transitioning to the next port state. The forward delay should
        be large enough to allow all Super ELAN bridges in the
        SuperELAN to disable ports in the new topology while the new
        spanning tree is being set up prior to forwarding data frames.
        Values too low might cause temporary loops in the SuperELAN,
        because not all bridges will complete the spanning tree updates.
        While values too large, lengthen network partitions after the
        spanning tree has converged, which causes data frame delays.
        The default value indicated that the bridge will begin forwarding
        frames 30 seconds after the spanning tree has converged: 15 seconds
        in listening state and 15 seconds in learning state."
    DEFVAL { 15 }
    ::= { ibmSEBridgeConfigEntry 10 }

ibmSEBridgeAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The Bridge MAC Address identifies the SuperELAN for the purposes
        of maintaining the SEB Spanning tree. If no value is configured,
        the SEB interface with the lowest MAC address will be used. This
        6 octet Spanning Tree MAC Address is added to the value of the
        SuperELAN priority found in ibmSEPriority to create a SEB ID."
    DEFVAL { '000000000000'h }
    ::= { ibmSEBridgeConfigEntry 11 }

ibmSEType OBJECT-TYPE
    SYNTAX INTEGER {
        sebEN(1),
        sebTR(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object indicates the type of SEB.  sebEN(1)
        specifies a type of Ethernet, sebTR(2) specific's a type of
        Token Ring."
    DEFVAL { sebTR }
    ::= { ibmSEBridgeConfigEntry 12 }

ibmSEConfigRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object is used to create or delete entries (rows)
        in the SuperElan Bridge Configuration Table."
    REFERENCE
        "
        RFC 1903, Textual Conventions for version 2 of the
        Simple Network Management Protocol (SNMPv2)."
    ::= { ibmSEBridgeConfigEntry 13 }

ibmSEPortConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmSEPortConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table that contains SuperELAN Bridge Port Configuration."
    ::= { ibmSuperELAN 3 }

ibmSEPortConfigEntry OBJECT-TYPE
    SYNTAX IbmSEPortConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The configuration information for each SuperELAN Bridge Port"
    INDEX { ibmSEBridgeId, ibmSEPortNum }
    ::= { ibmSEPortConfigTable 1 }

IbmSEPortConfigEntry ::= SEQUENCE {
    ibmSEPortIfNumber INTEGER,
    ibmSEPortElanName DisplayString,
    ibmSEPortRemoteElan INTEGER,
    ibmSEPortEnabled INTEGER,
    ibmSEPortPriority INTEGER,
    ibmSEPortRootCost INTEGER,
    ibmSEPortRowStatus RowStatus
    }

ibmSEPortIfNumber OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The interface number associated with this port."
    ::= { ibmSEPortConfigEntry 1 }

ibmSEPortElanName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..32))
--    Rsyntax OCTET STRING(SIZE(1..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The ELAN Name in which the SuperElan Bridge LEC participates.
        If the ELAN Name matches that of a LES/BUS on the same node,
        a SEB-LEC interface is automatically added to the configuration,
        and the SEB-LEC parameters needed to join the ELAN are read
        from the local ELAN configuration. If the ELAN name does not
        match that of a LES/BUS on the same node, the SEB-LEC must be
        configured to join the specified ELAN.
        
        No Default value a name must be specified."
    ::= { ibmSEPortConfigEntry 2 }

ibmSEPortRemoteElan OBJECT-TYPE
    SYNTAX INTEGER {
        true(1),
        false(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object indicates whether or not the  Super ELAN LE
        Services (LES/BUS) for the ELAN specified by ibmSEPortElanName
        are local to the same node as the port or not.
        
        If false(2) the LE Services are local, if true(1) the LE Services
        are remote (not resident at the same node as the SuperElan).
        
        Default is local ELAN."
    DEFVAL { false }
    ::= { ibmSEPortConfigEntry 3 }

ibmSEPortEnabled OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        When enabled(1) the SuperELAN will bridge frames through this
        SEB port. When disabled(2) the SuperELAN will not bridge frames
        through this port."
    DEFVAL { enabled }
    ::= { ibmSEPortConfigEntry 4 }

ibmSEPortPriority OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        This value influences which port is used when two or more
        ports are connected to the same network segment. This situation
        may cause a routing loop and a the priority provides a port selection
        method. A lower value represents a higher priority.
        
        ?Is Define ports and interfaces as bit 16 going to be a problem.?
        Put in to agent capabilities and check in agent.
        "
    DEFVAL { 128 }
    ::= { ibmSEPortConfigEntry 5 }

ibmSEPortRootCost OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The cost added to the root path cost in the Spanning Tree
        configuration message received on this port in order to
        determine the path cost to get to the root bridge through
        this port. Setting this value small increases the probability
        that this port will be close to the root bridge, and thus
        asked to carry more broadcast and unknown unicast traffic."
    DEFVAL { 32768 }
    ::= { ibmSEPortConfigEntry 6 }

ibmSEPortRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object is used to create or delete entries (rows)
        in the SuperElan Bridge Port Configuration Table."
    REFERENCE
        "
        RFC 1903, Textual Conventions for version 2 of the
        Simple Network Management Protocol (SNMPv2)."
    ::= { ibmSEPortConfigEntry 7 }

ibmSEBridgeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmSEBridgeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table that contains bridge information for the SEB."
    ::= { ibmSuperELAN 4 }

ibmSEBridgeEntry OBJECT-TYPE
    SYNTAX IbmSEBridgeEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry (row) contains additional SEB pertaining to
         a specific SEB instance."
    INDEX { ibmSEBridgeId }
-- Augments ibmSEBridgeConfigEntry
    ::= { ibmSEBridgeTable 1 }

IbmSEBridgeEntry ::= SEQUENCE {
    ibmSENumPorts INTEGER,
    ibmSEProtocolSpecification INTEGER,
    ibmSETimeSinceTopologyChange TimeTicks,
    ibmSETopChanges Counter32,
    ibmSEDesignatedRoot BridgeId,
    ibmSERootCost INTEGER,
    ibmSERootPort INTEGER,
    ibmSEBridgeMaxAge Timeout,
    ibmSEHelloTime Timeout,
    ibmSEHoldTime INTEGER,
    ibmSEForwardDelay Timeout,
    ibmSEMacLearnedEntryDiscards Counter32,
    ibmSERDLearnedEntryDiscards Counter32
    }

ibmSENumPorts OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of ports defined for this SEB.
        
        This number can be used to determine the next available
        port number for row creation in any of the SEB Port Tables.
        Of course the next available index is determined by adding
        one to the number of ports defined."
    ::= { ibmSEBridgeEntry 1 }

ibmSEProtocolSpecification OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        tbSra(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The protocol type used for this SEB. Currently only
        Transparent Bridging with Source Route Awareness (tbSra(2))
        is the only defined protocol type for SEB's."
    ::= { ibmSEBridgeEntry 2 }

ibmSETimeSinceTopologyChange OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The time (in hundredths of a second) since the
        last time a topology change was detected by the
        bridge entity."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.8.1.1.3"
    ::= { ibmSEBridgeEntry 3 }

ibmSETopChanges OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of topology changes detected by
        this bridge since the management entity was last
        reset or initialized."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.8.1.1.3"
    ::= { ibmSEBridgeEntry 4 }

ibmSEDesignatedRoot OBJECT-TYPE
    SYNTAX BridgeId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The bridge identifier of the root of the spanning
        tree as determined by the Spanning Tree Protocol
        as executed by this node.  This value is used as
        the Root Identifier parameter in all Configuration
        Bridge PDUs originated by this node."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.1"
    ::= { ibmSEBridgeEntry 5 }

ibmSERootCost OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The cost of the path to the root as seen from
        this bridge."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.2"
    ::= { ibmSEBridgeEntry 6 }

ibmSERootPort OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The port number of the port which offers the
        lowest cost path from this bridge to the root
        bridge."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.3"
    ::= { ibmSEBridgeEntry 7 }

ibmSEBridgeMaxAge OBJECT-TYPE
    SYNTAX Timeout(1..65535)
--    Rsyntax INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum age of Spanning Tree Protocol
        information learned from the network on any port
        before it is discarded, in units of hundredths of
        a second.  This is the actual value that this
        bridge is currently using."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.4"
    ::= { ibmSEBridgeEntry 8 }

ibmSEHelloTime OBJECT-TYPE
    SYNTAX Timeout(1..65535)
--    Rsyntax INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The amount of time between the transmission of
        Configuration bridge PDUs by this node on any port
        when it is the root of the spanning tree or trying
        to become so, in units of hundredths of a second.
        This is the actual value that this bridge is
        currently using."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.5"
    ::= { ibmSEBridgeEntry 9 }

ibmSEHoldTime OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This time value determines the interval length
        during which no more than two Configuration bridge
        PDUs shall be transmitted by this node, in units
        of hundredths of a second."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.14"
    ::= { ibmSEBridgeEntry 10 }

ibmSEForwardDelay OBJECT-TYPE
    SYNTAX Timeout(1..65535)
--    Rsyntax INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This time value, measured in units of hundredths
        of a second, controls how fast a port changes its
        spanning state when moving towards the Forwarding
        state.  The value determines how long the port
        stays in each of the Listening and Learning
        states, which precede the Forwarding state.  This
        value is also used, when a topology change has
        been detected and is underway, to age all dynamic
        entries in the Forwarding Database.  [Note that
        this value is the one that this bridge is
        currently using, in contrast to
        ibmSEBridgeForwardDelay which is the value that
        this bridge and all others would start using
        if/when this bridge were to become the root.]"
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.3.6"
    ::= { ibmSEBridgeEntry 11 }

ibmSEMacLearnedEntryDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of Mac Forwarding Database entries,
        which have been or would have been learnt, but
        have been discarded due to a lack of space to
        store them in the Forwarding Database.  If this
        counter is increasing, it indicates that the
        Forwarding Database is regularly becoming full (a
        condition which has unpleasant performance effects
        on the subnetwork).  If this counter has a
        significant value but is not presently increasing,
        it indicates that the problem has been occurring
        but is not persistent."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.7.1.1.3"
    ::= { ibmSEBridgeEntry 12 }

ibmSERDLearnedEntryDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of Route Descriptor Forwarding Database
        entries, which have been or would have been learnt, but
        have been discarded due to a lack of space to
        store them in the Forwarding Database.  If this
        counter is increasing, it indicates that the
        Forwarding Database is regularly becoming full (a
        condition which has unpleasant performance effects
        on the subnetwork).  If this counter has a
        significant value but is not presently increasing,
        it indicates that the problem has been occurring
        but is not persistent."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.7.1.1.3"
    ::= { ibmSEBridgeEntry 13 }

ibmSEStpPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmSEStpPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A table that contains port-specific information and
         Spanning Tree Protocol information for each SEB Port."
    ::= { ibmSuperELAN 5 }

ibmSEStpPortEntry OBJECT-TYPE
    SYNTAX IbmSEStpPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of SEB information maintained for each SEB port."
    INDEX { ibmSEBridgeId, ibmSEPortNum }
-- Augments ibmSEPortConfigEntry
    ::= { ibmSEStpPortTable 1 }

IbmSEStpPortEntry ::= SEQUENCE {
    ibmSEStpPortState INTEGER,
    ibmSEStpPortDesignatedRoot BridgeId,
    ibmSEStpPortDesignatedCost INTEGER,
    ibmSEStpPortDesignatedBridge BridgeId,
    ibmSEStpPortDesignatedPort INTEGER,
    ibmSEStpPortForwardTransitions Counter32,
    ibmSEPortMaxInfo INTEGER
    }

ibmSEStpPortState OBJECT-TYPE
    SYNTAX INTEGER {
        forwarding(1),
        learning(2),
        listening(3),
        blocked(4),
        configured(5),
        netdown(6),
        configuring(7),
        unknown(8)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The port's current state as defined by
        application of the Spanning Tree Protocol.  This
        state controls what action a port takes on
        reception of a frame.  If the bridge has detected
        a port that is malfunctioning it will place that
        port into the broken(6) state.  For ports which
        are disabled (see ibmSEPortEnable), this object
        will have a value of disabled(1).
        
        forwarding(1) - port is in forwarding state
        learning(2) - port is in learning state
        listening(3) - port is in listening state
        blocked(4)  -  this port is blocked by spanning tree
        configured(5) -  this port is waiting for spanning tree
        netdown(6) - this ports network interface is down
        configuring(7) - this port is loading LEC configuration
        unknown(8) - this port is in some unknown state"
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.5.2"
    ::= { ibmSEStpPortEntry 1 }

ibmSEStpPortDesignatedRoot OBJECT-TYPE
    SYNTAX BridgeId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The unique Bridge Identifier of the Bridge
        recorded as the Root in the Configuration BPDUs
        transmitted by the Designated Bridge for the
        segment to which the port is attached."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.5.4"
    ::= { ibmSEStpPortEntry 2 }

ibmSEStpPortDesignatedCost OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The path cost of the Designated Port of the
        segment connected to this port.  This value is
        compared to the Root Path Cost field in received
        bridge PDUs."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.5.5"
    ::= { ibmSEStpPortEntry 3 }

ibmSEStpPortDesignatedBridge OBJECT-TYPE
    SYNTAX BridgeId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Bridge Identifier of the bridge which this
        port considers to be the Designated Bridge for
        this port's segment."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.5.6"
    ::= { ibmSEStpPortEntry 4 }

ibmSEStpPortDesignatedPort OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Port Identifier of the port on the Designated
        Bridge for this port's segment."
    REFERENCE
        "IEEE 802.1D-1990: Section 4.5.5.7"
    ::= { ibmSEStpPortEntry 5 }

ibmSEStpPortForwardTransitions OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times this port has transitioned
        from the Learning state to the Forwarding state."
    ::= { ibmSEStpPortEntry 6 }

ibmSEPortMaxInfo OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum size of the INFO (non-MAC) field that
        this port will receive or transmit."
    ::= { ibmSEStpPortEntry 7 }

ibmSEPortDataStatisticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmSEPortDataStatisticsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains statistics about LAN Emulation
         Data Frame Statistics for Super ELAN Bridge ports."
    ::= { ibmSuperELAN 8 }

ibmSEPortDataStatisticsEntry OBJECT-TYPE
    SYNTAX IbmSEPortDataStatisticsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of LE Data Frame statistical information
        for each SEB port"
    INDEX { ibmSEBridgeId, ibmSEPortNum }
-- Augments ibmSEPortConfigEntry
    ::= { ibmSEPortDataStatisticsTable 1 }

IbmSEPortDataStatisticsEntry ::= SEQUENCE {
    ibmSEPortInFrames Counter32,
    ibmSEPortOutFrames Counter32,
    ibmSEPortRoutedInFrames Counter32,
    ibmSEPortBpduFrames Counter32,
    ibmSEPortInDiscards Counter32,
    ibmSEPortDropSrcAddrFilters Counter32,
    ibmSEPortDropDestAddrFilters Counter32,
    ibmSEPortDropProtocolFilters Counter32,
    ibmSEPortDropSrcNotFwds Counter32,
    ibmSEPortDropDestNotFwds Counter32,
    ibmSEPortDropInputOverflows Counter32,
    ibmSEPortDropBpduOverflows Counter32,
    ibmSEPortDropSrOverflows Counter32,
    ibmSEPortRecNoBuffFailures Counter32,
    ibmSEPortTransmitFailures Counter32,
    ibmSEPortToBigFailures Counter32,
    ibmSEPortLanIdFailures Counter32,
    ibmSEPortStpLanIdFailures Counter32
    }

ibmSEPortInFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of frames that have been received by
         this port from its segment. Note that a frame
         received on the interface corresponding to this
         port is only counted by this object if and only if
         it is for a protocol being processed by the local
         bridging function, including bridge management
         frames."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.6.1.1.3"
    ::= { ibmSEPortDataStatisticsEntry 1 }

ibmSEPortOutFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of frames that have been transmitted
         by this port to its segment.  Note that a frame
         transmitted on the interface corresponding to this
         port is only counted by this object if and only if
         it is for a protocol being processed by the local
         bridging function, including bridge management
         frames."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.6.1.1.3"
    ::= { ibmSEPortDataStatisticsEntry 2 }

ibmSEPortRoutedInFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames received on this port that were routed, rather than,
        or in addition to, bridged."
    ::= { ibmSEPortDataStatisticsEntry 3 }

ibmSEPortBpduFrames OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Count of SE BPDU Frames"
    ::= { ibmSEPortDataStatisticsEntry 4 }

ibmSEPortInDiscards OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Count of valid frames received which were
         discarded (i.e., filtered) by the Forwarding
         Process."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.6.1.1.3"
    ::= { ibmSEPortDataStatisticsEntry 5 }

ibmSEPortDropSrcAddrFilters OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames dropped due to Source Address filtering"
    ::= { ibmSEPortDataStatisticsEntry 6 }

ibmSEPortDropDestAddrFilters OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames dropped due to destination address filtering. These are
        frames to destinations on the same LAN that they arrived on,
        or otherwise filtered by the filtering database of the bridge."
    ::= { ibmSEPortDataStatisticsEntry 7 }

ibmSEPortDropProtocolFilters OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames dropped due to user filtering of particular protocol
        identifiers."
    ::= { ibmSEPortDataStatisticsEntry 8 }

ibmSEPortDropSrcNotFwds OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames received on this port when it was not in forwarding
        state (mostly in learning state)."
    ::= { ibmSEPortDataStatisticsEntry 9 }

ibmSEPortDropDestNotFwds OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames not sent because output port not in forwarding state.
        Don't know which port they tag on yet."
    ::= { ibmSEPortDataStatisticsEntry 10 }

ibmSEPortDropInputOverflows OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frames dropped due to input queue overflow."
    ::= { ibmSEPortDataStatisticsEntry 11 }

ibmSEPortDropBpduOverflows OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        BPDU's dropped due to BPDU input queue overflow."
    ::= { ibmSEPortDataStatisticsEntry 12 }

ibmSEPortDropSrOverflows OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Source Route Frames dropped due to SR input queue overflow."
    ::= { ibmSEPortDataStatisticsEntry 13 }

ibmSEPortRecNoBuffFailures OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Receive frames discarded due to no buffer available."
    ::= { ibmSEPortDataStatisticsEntry 14 }

ibmSEPortTransmitFailures OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Frame Count of transmit failures."
    ::= { ibmSEPortDataStatisticsEntry 15 }

ibmSEPortToBigFailures OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Count of frames to big to sent on this port."
    ::= { ibmSEPortDataStatisticsEntry 16 }

ibmSEPortLanIdFailures OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Count of frames discarded due to mismatch in the LAN ID."
    ::= { ibmSEPortDataStatisticsEntry 17 }

ibmSEPortStpLanIdFailures OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Count of frames discarded due to duplicate LAN ID or
        spanning tree error."
    ::= { ibmSEPortDataStatisticsEntry 18 }

ibmBbcmConfigNextId OBJECT-TYPE
    SYNTAX Integer32(0..214748364)
    ACCESS read-only
    STATUS obsolete
    DESCRIPTION
        "The next available index in the ibmBbcmConfigTable.
        The value of this object can be used as the index by the
        network manager to create an entry in the table.
        
        This object is no longer required since the ibmBbcmConfigIndex
        is now specified as the superElanID."
    ::= { ibmBbcmConfigGroup 1 }

ibmBbcmConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmBbcmConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        This table contains configuration values for the Bridging
        Broadcast Manager (BBCM)."
    ::= { ibmBbcmConfigGroup 2 }

ibmBbcmConfigEntry OBJECT-TYPE
    SYNTAX IbmBbcmConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the table represents a configured instance
        of the BBCM."
    INDEX { ibmBbcmConfigIndex }
    ::= { ibmBbcmConfigTable 1 }

IbmBbcmConfigEntry ::= SEQUENCE {
    ibmBbcmConfigIndex IbmSEBridgeID,
    ibmBbcmName DisplayString,
    ibmBbcmConfigRowStatus RowStatus
    }

ibmBbcmConfigIndex OBJECT-TYPE
    SYNTAX IbmSEBridgeID
--    Rsyntax INTEGER(1..65535)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        A value which uniquely identifies a conceptual row of the
        BBCM Configuration Table.
        
        Since BBCM is a bridge based function, each row of this table
        identifies a unique bridge instance."
    ::= { ibmBbcmConfigEntry 1 }

ibmBbcmName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..32))
--    Rsyntax OCTET STRING(SIZE(0..32))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        This is the name associated with the bridge instance. It is
        either the Super Elan Bridge name or the name assigned
        to the base bridge."
    ::= { ibmBbcmConfigEntry 2 }

ibmBbcmConfigRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object is used to create or
        delete entries in the ibmBbcmConfigTable."
    REFERENCE
        "
        RFC 1903, Textual Conventions for version 2 of the
        Simple Network Management Protocol (SNMPv2)."
    ::= { ibmBbcmConfigEntry 3 }

ibmBbcmProtocolConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmBbcmProtocolConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the table represents a configured instance
        of a specific protocol for a particular BBCM instance."
    ::= { ibmBbcmConfigGroup 3 }

ibmBbcmProtocolConfigEntry OBJECT-TYPE
    SYNTAX IbmBbcmProtocolConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the table represents a configuration information
        for a specific protocol supported by a specific BBCM."
    INDEX { ibmBbcmProtocolType, ibmBbcmConfigIndex }
    ::= { ibmBbcmProtocolConfigTable 1 }

IbmBbcmProtocolConfigEntry ::= SEQUENCE {
    ibmBbcmProtocolType INTEGER,
    ibmBbcmProtocolOperStatus INTEGER,
    ibmBbcmProtocolAdminStatus INTEGER,
    ibmBbcmProtocolCacheAge Integer32
    }

ibmBbcmProtocolType OBJECT-TYPE
    SYNTAX INTEGER {
        reserved(1),
        ip(2)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        BBCM Protocols Supported. For ease in implementation
        the enumerated types for ibmBbcmProtocolType and
        ibmBbcmStatProtocolType are equivalent.
        
        Note: 1 is reserved so ibmBbcmStatProtocolType of 1 can be all.
              This allows enumeration values to match between ibmBbcmProtocolType
              and ibmBbcmStatProtocolType."
    ::= { ibmBbcmProtocolConfigEntry 1 }

ibmBbcmProtocolOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        up(2),
        down(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The current BBCM Status
        
        Note for this implementation other is defined only to be consistent
        with standard LE server MIBs, it has no meaning for the definition."
    ::= { ibmBbcmProtocolConfigEntry 2 }

ibmBbcmProtocolAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
        up(2),
        down(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
         The desired state of the BBCM as prescribed by the
         operator. The actions of the agent will, if at all possible,
         eventually result in the desired state being reflected in the
         ibmBbcmProtocolOperStatus."
    ::= { ibmBbcmProtocolConfigEntry 3 }

ibmBbcmProtocolCacheAge OBJECT-TYPE
    SYNTAX Integer32(1..214748364)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The number of minutes a protocol is cached by BBCM before
        being added due to inactivity."
    ::= { ibmBbcmProtocolConfigEntry 4 }

ibmBbcmStatTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmBbcmStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        This table contains activity statistics on a BBCM basis."
    ::= { ibmBbcmStatsGroup 1 }

ibmBbcmStatEntry OBJECT-TYPE
    SYNTAX IbmBbcmStatEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the tables represents a BBCM protocol instance."
    INDEX { ibmBbcmStatProtocolType, ibmBbcmConfigIndex }
    ::= { ibmBbcmStatTable 1 }

IbmBbcmStatEntry ::= SEQUENCE {
    ibmBbcmStatProtocolType INTEGER,
    ibmBbcmStatInReceives Counter32,
    ibmBbcmStatInOctets Counter32,
    ibmBbcmStatOutManaged Counter32,
    ibmBbcmStatOutManagedOctets Counter32,
    ibmBbcmStatOutNotManaged Counter32,
    ibmBbcmStatOutNotManagedOctets Counter32,
    ibmBbcmStatOutFiltered Counter32,
    ibmBbcmStatOutFilteredOctets Counter32
    }

ibmBbcmStatProtocolType OBJECT-TYPE
    SYNTAX INTEGER {
        allprotocols(1),
        ip(2)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        BBCM Protocols Supported. For ease in implementation
        the enumerated types for ibmBbcmProtocolType and
        ibmBbcmStatProtocolType are equivalent.
        
        When the protocol type is 1 (allprotocols) the response
        contains the total count for all protocols supported by
        this BBCM."
    ::= { ibmBbcmStatEntry 1 }

ibmBbcmStatInReceives OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Number of packets processed by BBCM for this protocol"
    ::= { ibmBbcmStatEntry 2 }

ibmBbcmStatInOctets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Number of Octets processed by BBCM for this protocol.
        
        This count is of all octets seen, including control
        information like headers."
    ::= { ibmBbcmStatEntry 3 }

ibmBbcmStatOutManaged OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Number of packets transformed by BBCM from broadcast to
        unicast for this protocol."
    ::= { ibmBbcmStatEntry 4 }

ibmBbcmStatOutManagedOctets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Number of Octets transformed by BBCM from broadcast to
        unicast for this protocol.
        
        This count is of all octets seen, including control
        information like headers."
    ::= { ibmBbcmStatEntry 5 }

ibmBbcmStatOutNotManaged OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of packets seen by BBCM that were left as they
        were originally broadcast."
    ::= { ibmBbcmStatEntry 6 }

ibmBbcmStatOutNotManagedOctets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of octets seen by BBCM that were left as they
        were originally broadcast.
        
        This count is of all octets seen, including control
        information like headers."
    ::= { ibmBbcmStatEntry 7 }

ibmBbcmStatOutFiltered OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Number of Packets Filtered by BBCM."
    ::= { ibmBbcmStatEntry 8 }

ibmBbcmStatOutFilteredOctets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Number of Octets Filtered by BBCM."
    ::= { ibmBbcmStatEntry 9 }

ibmVlanConfIndexNextID OBJECT-TYPE
    SYNTAX IbmVlanIndex
--    Rsyntax Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        This is the next available Vlan Index for this agent. If should be
        used when creating rows in the Vlan tables indexed by ibmVlanConfIndex."
    ::= { ibmVlanGOGroup 1 }

ibmVlanTopologyChange OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        This is the time stamp at which time the last VLAN Topology Change
        occurred. This object can be used to monitor the change status of
        the VLANs controlled by this agent.
        
        A change is defined whenever a VLAN has been added, deleted
        or changes configuration.
        
        A change is also defined when a port is discovered or is aged out."
    ::= { ibmVlanGOGroup 2 }

ibmVlanMaxPortMap OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        This is the maximum number of octets this agent supports
        for representing ports in the the Port Map objects which use
        the textual convention IbmVlanPortMap."
    ::= { ibmVlanGOGroup 3 }

ibmVlanMaxUDSWMaskFilter OBJECT-TYPE
    SYNTAX Integer32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        This is the maximum number of octets this agent supports for
        ibmVlanUDSWMask or ibmVlanUDSWFilter. The Mask and Filter must
        contain the same number of octets."
    ::= { ibmVlanGOGroup 4 }

ibmVlanConfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The layout of the VLAN MIB tables relies on common information
        and VLAN type specific information.
        The ibmVlanConfTable is the base table. Columns are added to
        this table depending on the VLAN type, for example
        ibmVlanIPConfTable is for IP VLANs, ibmVlanIPXConfTable is
        for IPX VlANS, ibmVlanUDSWConfTable is for User Defined Sliding
        Window based VLANs, and ibmVlanMacConfTable is for MAC address
        defined VLANs. Associated with the extended configuration
        table is a base status table, ibmVlanStatusTable. This table
        covers generic status and the USDW and MAC VLAN status
        requirements are currently defined. Specific status table additions
        are provided by the ibmVlanIpStatusTable for IP criteria."
    ::= { ibmVlanConfGroup 1 }

ibmVlanConfEntry OBJECT-TYPE
    SYNTAX IbmVlanConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the ibmVlanConfTable provides configuration information
        pertaining to a specific instance of a VLAN."
    INDEX { ibmVlanConfIndex }
    ::= { ibmVlanConfTable 1 }

IbmVlanConfEntry ::= SEQUENCE {
    ibmVlanConfIndex IbmVlanIndex,
    ibmVlanConfBridgeId IbmSEBridgeID,
    ibmVlanConfType IbmVlanType,
    ibmVlanConfAgingTimer UInteger32,
    ibmVlanConfForwardingPortMap IbmVlanPortMap,
    ibmVlanConfIncludedPortMap IbmVlanPortMap,
    ibmVlanConfExcludedPortMap IbmVlanPortMap,
    ibmVlanConfName DisplayString,
    ibmVlanConfRowStatus RowStatus
    }

ibmVlanConfIndex OBJECT-TYPE
    SYNTAX IbmVlanIndex
--    Rsyntax Integer32
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        An index assigned by the agent which uniquely identifies an instance
        of a VLAN. This objects value is NOT guaranteed to be the same value
        across agent restarts."
    ::= { ibmVlanConfEntry 1 }

ibmVlanConfBridgeId OBJECT-TYPE
    SYNTAX IbmSEBridgeID
--    Rsyntax INTEGER(1..65535)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The identifier of the Base Bridge or Super ELAN Bridge which
         this VLAN is defined as an additional filter for."
    ::= { ibmVlanConfEntry 2 }

ibmVlanConfType OBJECT-TYPE
    SYNTAX IbmVlanType
--    Rsyntax INTEGER {
--        ip(1),
--        ipx(2),
--        netbios(3),
--        userDefSldWindo(4),
--        mac(5),
--        byPort(6),
--        ipMulticast(7)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The type of VLAN."
    ::= { ibmVlanConfEntry 3 }

ibmVlanConfAgingTimer OBJECT-TYPE
    SYNTAX UInteger32
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The amount of time (in minutes) an auto-detect port will remain in
        the forwarding domain of the VLAN in the absence of traffic from that
        VLAN. A value of zero means forever."
    DEFVAL { 5000 }
    ::= { ibmVlanConfEntry 4 }

ibmVlanConfForwardingPortMap OBJECT-TYPE
    SYNTAX IbmVlanPortMap
--    Rsyntax OCTET STRING(SIZE(1..65535))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Defines which ports are in forwarding state for this VLAN. The VLAN
        port is in forwarding state if one of the following is true:
        
        The port has been statically included by setting the corresponding
        port in ibmVlanIncludedPortMap.
        
        The port is not excluded, corresponding port in ibmVlanExcludedPortMap
        is zero, and the port has seen VLAN traffic in the current age out period,
        as defined by ibmVlanConfAgingTimer."
    ::= { ibmVlanConfEntry 5 }

ibmVlanConfIncludedPortMap OBJECT-TYPE
    SYNTAX IbmVlanPortMap
--    Rsyntax OCTET STRING(SIZE(1..65535))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        Each of the bits in the port map represents a bridge port and
        defines which ports are automatically and permanently included
        from the forwarding domain of the VLAN. A value of 1 for the
        port means it is included. A value of 0 means the port has to
        be discovered (port traffic seen) to be included in the VLAN."
    DEFVAL { '0'h }
    ::= { ibmVlanConfEntry 6 }

ibmVlanConfExcludedPortMap OBJECT-TYPE
    SYNTAX IbmVlanPortMap
--    Rsyntax OCTET STRING(SIZE(1..65535))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        Each of the bits in the port map represents a bridge port and
        defines which ports are automatically and permanently excluded
        from the forwarding domain of the VLAN. A value of 1 for the
        port means it is excluded from the VLAN even if traffic for this
        VLAN type is seen on this port. A value of 0 means the port can
        be discovered."
    DEFVAL { '0'h }
    ::= { ibmVlanConfEntry 7 }

ibmVlanConfName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..32))
--    Rsyntax OCTET STRING(SIZE(0..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        A node unique user defined name for the VLAN.
        This name must be unique across all bridge instances at that node (agent)."
    ::= { ibmVlanConfEntry 8 }

ibmVlanConfRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object is used to create or delete entries (rows)
        in the VLAN Configuration Table."
    REFERENCE
        "
        RFC 1903, Textual Conventions for version 2 of the
        Simple Network Management Protocol (SNMPv2)."
    ::= { ibmVlanConfEntry 9 }

ibmVlanIpConfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanIpConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The IBM VLAN Configuration Table provides the definitions required
        to configure an IBM IP or IP Multicast Protocol Virtual LAN (PVLAN)
        
        This table defines the filters for the IP or IP Multicast PVLAN
        
        Entries in this table must be provided when the corresponding row
        of the ibmVlanConfTable is being created."
    ::= { ibmVlanConfGroup 2 }

ibmVlanIpConfEntry OBJECT-TYPE
    SYNTAX IbmVlanIpConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the ibmVlanIpConfTable provides configuration information
        pertaining to a specific instance of an IP or IP Multicast PVLAN."
    INDEX { ibmVlanConfIndex }
    ::= { ibmVlanIpConfTable 1 }

IbmVlanIpConfEntry ::= SEQUENCE {
    ibmVlanIpNetworkAddr IpAddress,
    ibmVlanIpNetworkMask IpAddress,
    ibmVlanIpCutThruFromHere INTEGER,
    ibmVlanIpCutThruToHere INTEGER
    }

ibmVlanIpNetworkAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The IP or IP Multicast address of the local forwarding component
        used to route or bridge traffic for this VLAN.
        
        No default value. A default value must be specified when creating
        an IP or IP Multicast VLAN."
    ::= { ibmVlanIpConfEntry 1 }

ibmVlanIpNetworkMask OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The IP address mask used to 'AND' against the IP address in a
        received IP frame. The result of the 'AND' operation is compared to
        the value given in the ibmVlanIPNetworkAddr in order to determine if
        the frame belongs to the VLAN and should be forwarded.
        
        There is no default value. A mask must be specified when creating an IP PVLAN
        entry in the ibmVlanConfTable.
        
        Note: if the ibmVlanConfType is IP Multicast ibmVlanIpNetworkMask
              the ibmVlanIpNetworkMask is not used. A value 0.0.0.0 should be
              returned by the agent."
    ::= { ibmVlanIpConfEntry 2 }

ibmVlanIpCutThruFromHere OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        Specifies whether IP cut through communications originating from
        this subnet are enabled."
    DEFVAL { disabled }
    ::= { ibmVlanIpConfEntry 3 }

ibmVlanIpCutThruToHere OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        Specifies whether IP cut through communications destined for
        this subnet are enabled."
    DEFVAL { disabled }
    ::= { ibmVlanIpConfEntry 4 }

ibmVlanIpxConfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanIpxConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The IBM IPX VLAN Configuration Table provides the definitions required
        to configure an IBM IPX Protocol Virtual LAN (PVLAN).
        
        This table defines the filters for the IPX PVLAN.
        
        Entries in this table must be provided when the corresponding row
        of the ibmVlanConfTable is being created."
    ::= { ibmVlanConfGroup 3 }

ibmVlanIpxConfEntry OBJECT-TYPE
    SYNTAX IbmVlanIpxConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the ibmVlanIpxConfTable provides configuration information
        pertaining to a specific instance of an IPX PVLAN."
    INDEX { ibmVlanConfIndex }
    ::= { ibmVlanIpxConfTable 1 }

IbmVlanIpxConfEntry ::= SEQUENCE {
    ibmVlanIpxNetworkAddr OCTET STRING(SIZE(4))
    }

ibmVlanIpxNetworkAddr OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(4))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This is the VLANs IPX Network Address.
        
        No Default Value, one must be specified when creating an IPX PVLAN
        in the ibmVlanConfTable."
    ::= { ibmVlanIpxConfEntry 1 }

ibmVlanUDSWConfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanUDSWConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        This table defines a 'sliding window' mechanism for the definition of
        'policy' or 'user' defined VLANs. The mechanism is based on a set of
        mask and filter fields that when compared to traffic data permit
        forwarding decisions for the packet to be made for a VLAN.
        The window may be moved or slide by defining the
        appropriate offset type and offset values for the mask and filter
        object fields.
        Care must be taken to ensure the consistent configuration of VLAN
        policies. Once a VLAN entry has been made in the table if a
        change is made to any of the variables in that row for the VLAN
        then all other entries in other nodes associated with the VLAN
        must be updated in a corresponding manner!
        
        This table is an auxiliary extension to the base VLAN configuration
        table defined in ibmVlanConfTable.
        See that table for additional Vlan details.
        "
    ::= { ibmVlanConfGroup 4 }

ibmVlanUDSWConfEntry OBJECT-TYPE
    SYNTAX IbmVlanUDSWConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the ibmVlanUDSWConfTable provides configuration information
        pertaining to a specific instance of an UDSW VLAN.
        
        Entries in this table must be provided when the corresponding row
        of the ibmVlanConfTable is being created."
    INDEX { ibmVlanConfIndex }
    ::= { ibmVlanUDSWConfTable 1 }

IbmVlanUDSWConfEntry ::= SEQUENCE {
    ibmVlanUDSWOffsetType INTEGER,
    ibmVlanUDSWOffset INTEGER,
    ibmVlanUDSWMask OCTET STRING,
    ibmVlanUDSWFilter OCTET STRING
    }

ibmVlanUDSWOffsetType OBJECT-TYPE
    SYNTAX INTEGER {
        udswMacOffset(1),
        udswInfoOffset(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object specifies the base location in the traffic frame where
        the ibmVlanUDSWOffset will be used to start the comparison with the
        ibmVlanUDSWFilter value to determine if this frame is in a Sliding
        Window Vlan.
        
        Two starting location modes are predefined for LAN Emulation VLANs.
        udswMacOffset indicates that the starting location is the first byte
        of the MAC destination address in the traffic frame. This mode may be
        used for VLAN filtering on MAC addresses, for both Token Ring traffic and
        Ethernet traffic. The ibmVlanMacConfTable however should be used to
        define source MAC address based VLANs. This mode may also be used for
        VLAN filtering on protocol and address information or for other user
        specified information found in a portion of the LLC information field
        when source routed Token Ring traffic is NOT the traffic source (due
        to the presence of the variable size Routing Information Field).
        
        udswInfoOffset is a generic way of indicating that the starting
        location is at the first byte of the LLC information field.
        This mode may be used for VLAN filtering on protocol and address
        information or for other user specified information found in a
        portion of the LLC information field.  For source routed Token Ring,
        this location is not static within the frame since the
        Routing Information Field (RIF) is of variable length depending
        on LAN segments in the route. Specifying this mode permits the
        offset to begin relative to the end of the last byte of the RIF.
        
        There is no default value for this entry. The offset type
        must be defined when creating a user defined sliding window VLAN
        in the ibmVlanConfTable."
    ::= { ibmVlanUDSWConfEntry 1 }

ibmVlanUDSWOffset OBJECT-TYPE
    SYNTAX INTEGER(0..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object determines the starting location in the traffic frame
        that will be used in the comparison with the ibmVlanUDSWFilter
        value to determine if this frame is in a Sliding Window Vlan.
        It is specified as a value offset indicating the number of octets
        from the base location determined by the mode selected in the
        ibmVlanUSDWOffsetType.
        
        udswMacOffset mode indicates that the starting location for the
        compare is ibmVlanUDSWOffset octets after the the first byte
        of the MAC destination address.
        
        udswInfoOffset mode indicates that the starting location is
        ibmVlanUDSWOffset octets after the start of the frame's
        information field.
        
        There is no default value and this offset selection mode must be
        defined when creating a UDSW VLAN in the ibmVlanConfTable."
    ::= { ibmVlanUDSWConfEntry 2 }

ibmVlanUDSWMask OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object determines the size and bit pattern that is compared to
        the traffic frame at the location specified by the offset type and
        starting at the offset location in order to produce a result.
        The size of the mask must be equivalent to the size of the filter
        defined in ibmVlanUDSWFilter. The value of 1 in a mask bit location
        has the effect of making a comparison of the mask  to the traffic
        frame significant.  The value of a zero in a mask bit location has
        the effect of making the comparison of the mask with the traffic
        frame a 'don't care'.
        
        The octets in this object are transmitted in most significant byte
        first order.
        
        There is no default value and this mask must be specified when
        creating a UDSW VLAN in the ibmVlanConfTable."
    ::= { ibmVlanUDSWConfEntry 3 }

ibmVlanUDSWFilter OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..256))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object determines the size and bit pattern that is compared to
        the result after the mask being applied to the traffic frame
        at the location specified by the offset type and starting at
        the offset location.
        
        The size of the filter must be equivalent to the size of the
        mask defined in ibmVlanUDSWMask.
        
        If the result exactly matches the bit values defined in the filter
        then the frame is forwarded to the VLAN identified by the index
        for this table entry.
        
        The octets in this object are transmitted in most significant byte
        first order.
        
        There is no default value and this filter must be specified when
        creating a UDSW VLAN in the ibmVlanConfTable."
    ::= { ibmVlanUDSWConfEntry 4 }

ibmVlanMacConfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanMacConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The IBM MAC VLAN Configuration Table provides the definitions required
        to configure an IBM MAC Virtual LAN (VLAN).
        
        This table defines the filters for the IBM MAC VLAN.
        
        Entries in this table must be provided when the corresponding row
        of the ibmVlanConfTable is being created."
    ::= { ibmVlanConfGroup 5 }

ibmVlanMacConfEntry OBJECT-TYPE
    SYNTAX IbmVlanMacConfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry of the ibmVlanMacConfTable provides configuration information
        pertaining to a specific instance of a MAC VLAN."
    INDEX { ibmVlanConfIndex, ibmVlanMacAddrIndex }
    ::= { ibmVlanMacConfTable 1 }

IbmVlanMacConfEntry ::= SEQUENCE {
    ibmVlanMacAddrIndex Integer32,
    ibmVlanMacAddresses OCTET STRING,
    ibmVlanMacAddrConfRowStatus RowStatus
    }

ibmVlanMacAddrIndex OBJECT-TYPE
    SYNTAX Integer32
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The MAC address index being used as a filter for this MAC address VLAN."
    ::= { ibmVlanMacConfEntry 1 }

ibmVlanMacAddresses OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(0..600))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        A string of Source MAC addresses being used as a filter for this
        MAC address VLAN."
    ::= { ibmVlanMacConfEntry 2 }

ibmVlanMacAddrConfRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        This object is used to create or delete entries (rows)
        in the MAC Address Configuration Table."
    REFERENCE
        "
        RFC 1903, Textual Conventions for version 2 of the
        Simple Network Management Protocol (SNMPv2)."
    ::= { ibmVlanMacConfEntry 3 }

ibmVlanStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The IBM VLAN Status Table provides the administration and
        statistics for an IBM Virtual LAN (VLAN)."
    ::= { ibmVlanStatusGroup 1 }

ibmVlanStatusEntry OBJECT-TYPE
    SYNTAX IbmVlanStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry in the ibmVlanStatusTable augments a specific
        instance of an IP VLAN."
    INDEX { ibmVlanConfIndex }
-- Augments ibmVlanConfEntry
    ::= { ibmVlanStatusTable 1 }

IbmVlanStatusEntry ::= SEQUENCE {
    ibmVlanOperStatus INTEGER,
    ibmVlanAdminStatus INTEGER,
    ibmVlanProcessedPackets Counter32,
    ibmVlanDiscardedPackets Counter32,
    ibmVlanDiscPktsMac MacAddress
    }

ibmVlanOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        Current state of the VLAN"
    ::= { ibmVlanStatusEntry 1 }

ibmVlanAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        Desired state of the VLAN. This change becomes immediate
        on completion of the set operation and does not require system restart."
    ::= { ibmVlanStatusEntry 2 }

ibmVlanProcessedPackets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of Broadcast/Multicast packets received by this VLAN."
    ::= { ibmVlanStatusEntry 3 }

ibmVlanDiscardedPackets OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of Broadcast packets discarded by this VLAN
        because the source VLAN was excluded on the port."
    ::= { ibmVlanStatusEntry 4 }

ibmVlanDiscPktsMac OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "
        The object contains the Source MAC address from the last packet that
        was discarded because the source VLAN was excluded on the port.
        This will aid in finding the station that is being excluded.
        
        This object is defined as read-write so that a manager can clear
        the current Source MAC address after identifying the station that
        is trying to transmit on an excluded port. In order to clear the
        object the manager can specify a MAC address of all zeros 0x000000000000."
    ::= { ibmVlanStatusEntry 5 }

ibmVlanIpStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IbmVlanIpStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        The IBM IP VLAN Status Table provides the administration and
        statistics for an IBM IP Protocol Virtual LAN (PVLAN)."
    ::= { ibmVlanStatusGroup 2 }

ibmVlanIpStatusEntry OBJECT-TYPE
    SYNTAX IbmVlanIpStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "
        Each entry in the ibmVlanIpStatusTable augments a specific
        instance of an IP PVLAN."
    INDEX { ibmVlanConfIndex }
-- Augments ibmVlanIpConfEntry
    ::= { ibmVlanIpStatusTable 1 }

IbmVlanIpStatusEntry ::= SEQUENCE {
    ibmVlanIpCutThruFromPkts Counter32,
    ibmVlanIpCutThruToPkts Counter32,
    ibmVlanIpCutThruFromDiscPkts Counter32,
    ibmVlanIpCutThruToDiscPkts Counter32
    }

ibmVlanIpCutThruFromPkts OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of Broadcast/Multicast packets cutThru from this VLAN."
    ::= { ibmVlanIpStatusEntry 1 }

ibmVlanIpCutThruToPkts OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of Broadcast/Multicast packets received to this VLAN."
    ::= { ibmVlanIpStatusEntry 2 }

ibmVlanIpCutThruFromDiscPkts OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of Broadcast/Multicast packets discarded because cutThru
        from this VLAN was disabled."
    ::= { ibmVlanIpStatusEntry 3 }

ibmVlanIpCutThruToDiscPkts OBJECT-TYPE
    SYNTAX Counter32
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "
        The number of Broadcast/Multicast packets discarded before it is forwarded
        because cutThru to this VLAN was disabled."
    ::= { ibmVlanIpStatusEntry 4 }

ibmLeCServerXMonLECSGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    
--    These are the objects are used to support LECS
--  objects
--    ibmLeServerXMonLecsInstances, ibmLeServerXLecsUsedConnections

ibmLeCServerXMonLESGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    
--    These are the objects are used to support LES
--  objects
--    ibmLeServerXMonLesInstances, 
--    ibmLeServerXLesMonUsedConnections, 
--    ibmLeServerXLesMonLesLecInstances, ibmLeServerXLesMinLecID, 
--    ibmLeServerXLesMaxLecID

ibmLeCServerXMonBUSGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    
--    These are the objects are used to support BUS
--  objects
--    ibmLeServerXMonBusInstances, 
--    ibmLeServerXBusMonUsedConnections, 
--    ibmLeServerXBusMonBusLecInstances

ibmCSuperELANGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    
--    These are the objects are used to support SuperELAN
--  objects
--    ibmSEPortArpRequestsIn, ibmSEPortArpRequestsOut, 
--    ibmSEArpRequestsErrors, ibmSEPortArpRequestsFiltered, 
--    ibmSEPortArpRepliesIn, ibmSEPortArpRepliesOut, 
--    ibmSEPortArpRepliesErrors, ibmSEPortNarpRequestsIn, 
--    ibmSEPortNarpRequestsOut, ibmSEPortFlushRequestsIn, 
--    ibmSEPortFlushRequestsOut, ibmSEPortFlushRepliesIn, 
--    ibmSEPortFlushRepliesOut, ibmSEPortFlushRequestErrors, 
--    ibmSEPortFlushRepliesErrors, ibmSEPortLeCtrlFramesIn, 
--    ibmSEPortLeCtrlFramesOut, 
--    ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd, 
--    ibmSEPortLeCtrlFramesDiscDestPortNotFwrd, ibmSEAtmIfNumber, 
--    ibmSEEnabled, ibmSEName, ibmSEFrameSize, ibmSEMacCacheAge, 
--    ibmSERDCacheAge, ibmSEPriority, ibmSEMaxAge, 
--    ibmSEBridgeHelloTime, ibmSEBridgeForwardDelay, 
--    ibmSEBridgeAddress, ibmSEType, ibmSEConfigRowStatus, 
--    ibmSEPortIfNumber, ibmSEPortElanName, ibmSEPortRemoteElan, 
--    ibmSEPortEnabled, ibmSEPortPriority, ibmSEPortRootCost, 
--    ibmSEPortRowStatus, ibmSENumPorts, ibmSEProtocolSpecification, 
--    ibmSETimeSinceTopologyChange, ibmSETopChanges, 
--    ibmSEDesignatedRoot, ibmSERootCost, ibmSERootPort, 
--    ibmSEBridgeMaxAge, ibmSEHelloTime, ibmSEHoldTime, 
--    ibmSEForwardDelay, ibmSEMacLearnedEntryDiscards, 
--    ibmSERDLearnedEntryDiscards, ibmSEStpPortState, 
--    ibmSEStpPortDesignatedRoot, ibmSEStpPortDesignatedCost, 
--    ibmSEStpPortDesignatedBridge, ibmSEStpPortDesignatedPort, 
--    ibmSEStpPortForwardTransitions, ibmSEPortMaxInfo, 
--    ibmSEPortInFrames, ibmSEPortOutFrames, 
--    ibmSEPortRoutedInFrames, ibmSEPortBpduFrames, 
--    ibmSEPortInDiscards, ibmSEPortDropSrcAddrFilters, 
--    ibmSEPortDropDestAddrFilters, ibmSEPortDropProtocolFilters, 
--    ibmSEPortDropSrcNotFwds, ibmSEPortDropDestNotFwds, 
--    ibmSEPortDropInputOverflows, ibmSEPortDropBpduOverflows, 
--    ibmSEPortDropSrOverflows, ibmSEPortRecNoBuffFailures, 
--    ibmSEPortTransmitFailures, ibmSEPortToBigFailures, 
--    ibmSEPortLanIdFailures, ibmSEPortStpLanIdFailures

ibmCBbcmMIBGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    
--    These are the objects are used to support BBCM
--  objects
--    ibmBbcmName, ibmBbcmConfigRowStatus, 
--    ibmBbcmProtocolOperStatus, ibmBbcmProtocolAdminStatus, 
--    ibmBbcmProtocolCacheAge, ibmBbcmStatInReceives, 
--    ibmBbcmStatInOctets, ibmBbcmStatOutManaged, 
--    ibmBbcmStatOutManagedOctets, ibmBbcmStatOutNotManaged, 
--    ibmBbcmStatOutNotManagedOctets, ibmBbcmStatOutFiltered, 
--    ibmBbcmStatOutFilteredOctets

ibmCVlanMIBGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 6 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    
--    These are the objects are used to support VLAN
--  objects
--    ibmVlanConfIndexNextID, ibmVlanTopologyChange, 
--    ibmVlanMaxPortMap, ibmVlanMaxUDSWMaskFilter, ibmVlanConfIndex, 
--    ibmVlanConfBridgeId, ibmVlanConfType, ibmVlanConfAgingTimer, 
--    ibmVlanConfForwardingPortMap, ibmVlanConfIncludedPortMap, 
--    ibmVlanConfExcludedPortMap, ibmVlanConfName, 
--    ibmVlanConfRowStatus, ibmVlanIpNetworkAddr, 
--    ibmVlanIpNetworkMask, ibmVlanIpCutThruFromHere, 
--    ibmVlanIpCutThruToHere, ibmVlanIpxNetworkAddr, 
--    ibmVlanUDSWOffsetType, ibmVlanUDSWOffset, ibmVlanUDSWMask, 
--    ibmVlanUDSWFilter, ibmVlanMacAddrIndex, ibmVlanMacAddresses, 
--    ibmVlanMacAddrConfRowStatus, ibmVlanOperStatus, 
--    ibmVlanAdminStatus, ibmVlanProcessedPackets, 
--    ibmVlanDiscardedPackets, ibmVlanDiscPktsMac, 
--    ibmVlanIpCutThruFromPkts, ibmVlanIpCutThruToPkts, 
--    ibmVlanIpCutThruFromDiscPkts, ibmVlanIpCutThruToDiscPkts

ibmLeMIBCompliance OBJECT IDENTIFIER ::= { ibmLeMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for SNMP IBM extensions
--    for ATM emulated LANs.
--  Module
--    >>current<<
--   OptGroup
--    ibmLeCServerXMonLECSGroup
--   OptGroup
--    ibmLeCServerXMonLESGroup
--   OptGroup
--    ibmLeCServerXMonBUSGroup
--   OptGroup
--    ibmCSuperELANGroup
--   OptGroup
--    ibmCBbcmMIBGroup
--   OptGroup
--    ibmCVlanMIBGroup


END