mibs/MIBS/ibm/IBM-LAN-EMULATION-EXTENSION-MIB
2023-12-05 12:25:34 +01:00

2842 lines
89 KiB
Plaintext

-- MIB created 5/06/99 21:05:47, by
-- SMIC (the next generation) version 1.6.29, November 22, 1994.
IBM-LAN-EMULATION-EXTENSION-MIB DEFINITIONS ::= BEGIN
-- From file: "ibmlanex.mi2"
-- Compile options "G A T M"
IMPORTS
Gauge32, Integer32, Counter32, TimeTicks, IpAddress
FROM SNMPv2-SMI-v1
OBJECT-TYPE
FROM RFC-1212
RowStatus, DisplayString, MacAddress, TimeStamp
FROM SNMPv2-TC-v1
enterprises
FROM RFC1155-SMI
lesConfEntry
FROM LAN-EMULATION-LES-MIB
IfIndexOrZero
FROM LAN-EMULATION-ELAN-MIB
BridgeId, Timeout
FROM BRIDGE-MIB;
lanEmulation OBJECT IDENTIFIER ::= { ibmArchitecture 8 }
-- MODULE-IDENTITY
-- LastUpdated
-- 9804091200Z
-- OrgName
-- IBM Corporation
-- ContactInfo
-- Florian K Kandefer
-- Postal: IBM Corporation
-- 800 Park Offices Drive
-- Research Triangle Park, NC 27709
-- US
-- Tel: +1 919 254 0685
-- Fax: +1 919 254 0391
-- E-mail: kandefer@vnet.ibm.com
-- Descr
--
-- This MIB module contains definitions for common IBM LAN
-- Emulation Server and Client implementations.
-- RevDate
-- 9804091200Z
-- RevDescr
--
-- Added enumerations to IbmVlanType for by port vlans and
-- IP Multicast vlans.
-- RevDate
-- 9711051200Z
-- RevDescr
--
-- The following changes have been made for this revision
--
-- 1) VLAN MIB has been added
-- 2) Super ELAN MIB has been added with the exception
-- of the ibmSEPortStatisticsTable which existed in original MIB.
-- However, ibmSEPortStatisticsTable has been updated.
-- 3) deprecated ibmBbcmConfigNextId, the ibmBbcmConfigIndex
-- will take on the value of the superElanID.
-- RevDate
-- 9705221200Z
-- RevDescr
--
-- Changed ibmLeServerXLesConfigEntry to be an augment of
-- lesConfEntry and removed ibmLeServerXLesConfigIndex.
-- RevDate
-- 9701211200Z
-- RevDescr
--
-- The creation
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
ibmLeServerX OBJECT IDENTIFIER ::= { lanEmulation 3 }
ibmLeClientX OBJECT IDENTIFIER ::= { lanEmulation 4 }
ibmLeMIBConformance OBJECT IDENTIFIER ::= { lanEmulation 5 }
ibmLeServerXMonitoring OBJECT IDENTIFIER ::= { ibmLeServerX 1 }
ibmLeServerXConfig OBJECT IDENTIFIER ::= { ibmLeServerX 2 }
ibmLeServerXMon OBJECT IDENTIFIER ::= { ibmLeServerXMonitoring 1 }
ibmSuperELAN OBJECT IDENTIFIER ::= { ibmLeClientX 1 }
ibmBbcmMIB OBJECT IDENTIFIER ::= { ibmLeClientX 2 }
ibmBbcmConfigGroup OBJECT IDENTIFIER ::= { ibmBbcmMIB 1 }
ibmBbcmStatsGroup OBJECT IDENTIFIER ::= { ibmBbcmMIB 2 }
ibmVlan OBJECT IDENTIFIER ::= { ibmLeClientX 3 }
ibmVlanGGroup OBJECT IDENTIFIER ::= { ibmVlan 1 }
ibmVlanGOGroup OBJECT IDENTIFIER ::= { ibmVlanGGroup 1 }
ibmVlanCGroup OBJECT IDENTIFIER ::= { ibmVlan 2 }
ibmVlanConfGroup OBJECT IDENTIFIER ::= { ibmVlanCGroup 1 }
ibmVlanStatusGroup OBJECT IDENTIFIER ::= { ibmVlan 3 }
ibmLeMIBGroups OBJECT IDENTIFIER ::= { ibmLeMIBConformance 1 }
ibmLeMIBCompliances OBJECT IDENTIFIER ::= { ibmLeMIBConformance 2 }
IbmSEBridgeID ::= INTEGER(1..65535)
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
--
-- This is a unique identifier associated with the Super ELAN Bridge (SEB).
-- For SEB's spanning multiple devices, the SEB ID must be
-- consistent because it is propagated in the spanning tree BPDUs.
-- The SEB name has only local significance and need not be the
-- same for every device participating in the Super ELAN. The valid
-- range for SEB IDs is from 1 to 65279 (0xFEFF). The range
-- of ID's from 65280 to 65535 are reserved for non SEB's.
-- An ID of 65535 is reserved for the base bridge, a single non SEB.
IbmVlanPortMap ::= OCTET STRING(SIZE(1..65535))
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
--
-- The VLAN Port Map provides the bridge port mapping for a
-- specific VLAN definition. In the map each bit of each octet
-- provides the definition for a given port.
-- That is the first octet defines the first eight ports
-- of the bridge, the second octet defines the second
-- eight ports of the bridge and so on and so on and so on.
--
-- Note that bit 0 of octet 1 should never be set because
-- bridges have no concept of port 0.
--
-- ibmVlanMaxPortMap defines the maximum number of octets supported
-- in any of the PortMap objects, for this version of the agent.
IbmVlanIndex ::= Integer32
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
--
-- A value which uniquely identifies a conceptual row in the various
-- VLAN tables. The VlanIndex is used to correlate table information
-- pertaining to that same VLAN instance in the various VLAN tables.
--
-- This index is unique across all bridge instances.
IbmVlanType ::= INTEGER {
ip(1),
ipx(2),
netbios(3),
userDefSldWindo(4),
mac(5),
byPort(6),
ipMulticast(7)
}
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
--
-- A value which uniquely identifies the type of VLAN.
--
ibmLeServerXMonLecsInstances OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LECS instances currently created on this agent."
::= { ibmLeServerXMon 1 }
ibmLeServerXMonLesInstances OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LES instances currently created on this agent."
::= { ibmLeServerXMon 2 }
ibmLeServerXMonBusInstances OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of BUS instances currently created on this agent."
::= { ibmLeServerXMon 3 }
ibmLeServerXLecsMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmLeServerXLecsMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides monitoring of LECS instances."
::= { ibmLeServerXMonitoring 2 }
ibmLeServerXLecsMonEntry OBJECT-TYPE
SYNTAX IbmLeServerXLecsMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entries of ibmLeServerXLecsMonTable."
INDEX { ibmLeServerXLecsMonIndex }
::= { ibmLeServerXLecsMonTable 1 }
IbmLeServerXLecsMonEntry ::= SEQUENCE {
ibmLeServerXLecsMonIndex Integer32,
ibmLeServerXLecsUsedConnections Gauge32
}
ibmLeServerXLecsMonIndex OBJECT-TYPE
SYNTAX Integer32(0..214748364)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The index used to identify this LECS instance on
this agent. This variable has the same value as
the lecsConfIndex used to identify this instance
in the LECS MIB."
REFERENCE
"LAN-EMULATION-ELAN-MIB for definition of lecsConfIndex"
::= { ibmLeServerXLecsMonEntry 1 }
ibmLeServerXLecsUsedConnections OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of virtual connections currently
in use by this LECS instance."
::= { ibmLeServerXLecsMonEntry 2 }
ibmLeServerXLesMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmLeServerXLesMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides monitoring of LES instances."
::= { ibmLeServerXMonitoring 3 }
ibmLeServerXLesMonEntry OBJECT-TYPE
SYNTAX IbmLeServerXLesMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entries of ibmLeServerXLesMonTable."
INDEX { ibmLeServerXLesMonIndex }
::= { ibmLeServerXLesMonTable 1 }
IbmLeServerXLesMonEntry ::= SEQUENCE {
ibmLeServerXLesMonIndex Integer32,
ibmLeServerXLesMonUsedConnections Gauge32,
ibmLeServerXLesMonLesLecInstances Gauge32
}
ibmLeServerXLesMonIndex OBJECT-TYPE
SYNTAX Integer32(0..214748364)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The index used to identify this LES instance on
this agent. This variable has the same value as
the lesConfIndex used to identify this instance
in the LES MIB."
REFERENCE
"LAN-EMULATION-LES-MIB for definition of lesConfIndex"
::= { ibmLeServerXLesMonEntry 1 }
ibmLeServerXLesMonUsedConnections OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of virtual connections currently
in use by this LES instance."
::= { ibmLeServerXLesMonEntry 2 }
ibmLeServerXLesMonLesLecInstances OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of clients currently served by this
LES instance. This is the number of entries in the
lesLecTable which have successfully joined this
LES instance."
REFERENCE
"LAN-EMULATION-LES-MIB for definition of lesLecTable"
::= { ibmLeServerXLesMonEntry 3 }
ibmLeServerXBusMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmLeServerXBusMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides monitoring of BUS instances."
::= { ibmLeServerXMonitoring 4 }
ibmLeServerXBusMonEntry OBJECT-TYPE
SYNTAX IbmLeServerXBusMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entries of ibmLeServerXBusMonTable."
INDEX { ibmLeServerXBusMonIndex }
::= { ibmLeServerXBusMonTable 1 }
IbmLeServerXBusMonEntry ::= SEQUENCE {
ibmLeServerXBusMonIndex Integer32,
ibmLeServerXBusMonUsedConnections Gauge32,
ibmLeServerXBusMonBusLecInstances Gauge32
}
ibmLeServerXBusMonIndex OBJECT-TYPE
SYNTAX Integer32(0..214748364)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The index used to identify this BUS instance on
this agent. This variable has the same value as
the busConfIndex used to identify this instance
in the BUS MIB."
REFERENCE
"LAN-EMULATION-BUS-MIB for definition of busConfIndex"
::= { ibmLeServerXBusMonEntry 1 }
ibmLeServerXBusMonUsedConnections OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of virtual connections currently
in use by this BUS instance."
::= { ibmLeServerXBusMonEntry 2 }
ibmLeServerXBusMonBusLecInstances OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of clients currently served by this
BUS instance. This is the number of entries in the
busLecTable."
REFERENCE
"LAN-EMULATION-BUS-MIB for definition of busLecTable"
::= { ibmLeServerXBusMonEntry 3 }
ibmLeServerXLesConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmLeServerXLesConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides extension for LES configuration."
::= { ibmLeServerXConfig 1 }
ibmLeServerXLesConfigEntry OBJECT-TYPE
SYNTAX IbmLeServerXLesConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entries of ibmLeServerXLesConfigTable."
INDEX { lesConfIndex }
-- Augments lesConfEntry FROM LAN-EMULATION-LES-MIB
::= { ibmLeServerXLesConfigTable 1 }
IbmLeServerXLesConfigEntry ::= SEQUENCE {
ibmLeServerXLesMinLecID Integer32,
ibmLeServerXLesMaxLecID Integer32
}
ibmLeServerXLesMinLecID OBJECT-TYPE
SYNTAX Integer32(1..65279)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum number on the LEC ID range in use by
by this LES instance. The default value is 1
the first possible LEC ID. "
DEFVAL { 1 }
::= { ibmLeServerXLesConfigEntry 1 }
ibmLeServerXLesMaxLecID OBJECT-TYPE
SYNTAX Integer32(1..65279)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number on the LEC ID range in use by
by this LES instance. The default value is 65279
the last possible LEC ID. "
DEFVAL { 65279 }
::= { ibmLeServerXLesConfigEntry 2 }
ibmSEPortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmSEPortStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains statistics about LAN Emulation
Control Frame Statistics for Super ELAN Bridge ports."
::= { ibmSuperELAN 1 }
ibmSEPortStatisticsEntry OBJECT-TYPE
SYNTAX IbmSEPortStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of LE Control Frame statistical information
for each SEB port"
INDEX { ibmSEBridgeId, ibmSEPortNum }
::= { ibmSEPortStatisticsTable 1 }
IbmSEPortStatisticsEntry ::= SEQUENCE {
ibmSEBridgeId IbmSEBridgeID,
ibmSEPortNum INTEGER,
ibmSEPortArpRequestsIn Counter32,
ibmSEPortArpRequestsOut Counter32,
ibmSEArpRequestsErrors Counter32,
ibmSEPortArpRequestsDroppedPortBlocked Counter32,
ibmSEPortArpRequestsFiltered Counter32,
ibmSEPortArpRepliesIn Counter32,
ibmSEPortArpRepliesOut Counter32,
ibmSEPortArpRepliesErrors Counter32,
ibmSEPortNarpRequestsIn Counter32,
ibmSEPortNarpRequestsOut Counter32,
ibmSEPortNarpRequestsDroppedPortBlocked Counter32,
ibmSEPortFlushRequestsIn Counter32,
ibmSEPortFlushRequestsOut Counter32,
ibmSEPortFlushRepliesIn Counter32,
ibmSEPortFlushRepliesOut Counter32,
ibmSEPortFlushRequestErrors Counter32,
ibmSEPortFlushRepliesErrors Counter32,
ibmSEPortLeCtrlFramesIn Counter32,
ibmSEPortLeCtrlFramesOut Counter32,
ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd Counter32,
ibmSEPortLeCtrlFramesDiscDestPortNotFwrd Counter32
}
ibmSEBridgeId OBJECT-TYPE
SYNTAX IbmSEBridgeID
-- Rsyntax INTEGER(1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The identifier of the Super ELAN Bridge which
this LAN Emulation Client has joined."
::= { ibmSEPortStatisticsEntry 1 }
ibmSEPortNum OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The bridge port number associated with this
Super ELAN Bridge LAN Emulation Client.
This variable directly corresponds, is equal to, the
dot1dBasePort variable in rfc1493."
::= { ibmSEPortStatisticsEntry 2 }
ibmSEPortArpRequestsIn OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LE ARP Requests received by the
SEB port."
::= { ibmSEPortStatisticsEntry 3 }
ibmSEPortArpRequestsOut OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE ARP Requests transmitted
by the SEB port."
::= { ibmSEPortStatisticsEntry 4 }
ibmSEArpRequestsErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of received LE ARP Requests that were not
bridged by the SEB port"
::= { ibmSEPortStatisticsEntry 5 }
ibmSEPortArpRequestsDroppedPortBlocked OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of outgoing ARP Requests that were dropped
by the SEB port because the port was in
the blocking state."
REFERENCE
"rfc1493: dot1dStpPortState"
::= { ibmSEPortStatisticsEntry 6 }
ibmSEPortArpRequestsFiltered OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of received LE ARP Requests discarded by the
SEB port because the target MAC address in
the LE ARP Request was filtered by the bridge."
::= { ibmSEPortStatisticsEntry 7 }
ibmSEPortArpRepliesIn OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LE ARP Responses received by the
SEB port."
::= { ibmSEPortStatisticsEntry 8 }
ibmSEPortArpRepliesOut OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE ARP Responses transmitted
by the SEB port."
::= { ibmSEPortStatisticsEntry 9 }
ibmSEPortArpRepliesErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of received LE ARP Responses that were
dropped by the SEB port because the
SEB port originating the corresponding
LE ARP Request could not be determined."
::= { ibmSEPortStatisticsEntry 10 }
ibmSEPortNarpRequestsIn OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LE NARP Requests received by the
SEB port."
::= { ibmSEPortStatisticsEntry 11 }
ibmSEPortNarpRequestsOut OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE NARP Requests transmitted
by the SEB port."
::= { ibmSEPortStatisticsEntry 12 }
ibmSEPortNarpRequestsDroppedPortBlocked OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of bridged LE NARP Requests that were
dropped by the SEB port because the port
was in the blocking state."
REFERENCE
"rfc1493: dot1dStpPortState"
::= { ibmSEPortStatisticsEntry 13 }
ibmSEPortFlushRequestsIn OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LE Flush Requests received by
the SEB port."
::= { ibmSEPortStatisticsEntry 14 }
ibmSEPortFlushRequestsOut OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE Flush Requests transmitted
by the SEB port."
::= { ibmSEPortStatisticsEntry 15 }
ibmSEPortFlushRepliesIn OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LE Flush Responses received by the
SEB port."
::= { ibmSEPortStatisticsEntry 16 }
ibmSEPortFlushRepliesOut OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE Flush Responses transmitted
by the SEB port."
::= { ibmSEPortStatisticsEntry 17 }
ibmSEPortFlushRequestErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE Flush Request Errors for this
SEB port."
::= { ibmSEPortStatisticsEntry 18 }
ibmSEPortFlushRepliesErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bridged LE Flush Replies Errors for this
SEB port."
::= { ibmSEPortStatisticsEntry 19 }
ibmSEPortLeCtrlFramesIn OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of LE Control frames received by the
SEB port."
::= { ibmSEPortStatisticsEntry 20 }
ibmSEPortLeCtrlFramesOut OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of LE Control frames transmitted
by the SEB port."
::= { ibmSEPortStatisticsEntry 21 }
ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of LE Control frames discarded
because the SEB source port is not forwarding."
::= { ibmSEPortStatisticsEntry 22 }
ibmSEPortLeCtrlFramesDiscDestPortNotFwrd OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of LE Control frames discarded
because the SEB destination port is not forwarding."
::= { ibmSEPortStatisticsEntry 23 }
ibmSEBridgeConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmSEBridgeConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains the Super ELAN Bridge (SEB) Configuration."
::= { ibmSuperELAN 2 }
ibmSEBridgeConfigEntry OBJECT-TYPE
SYNTAX IbmSEBridgeConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The configuration information for each Super ELAN Bridge instance"
INDEX { ibmSEBridgeId }
::= { ibmSEBridgeConfigTable 1 }
IbmSEBridgeConfigEntry ::= SEQUENCE {
ibmSEAtmIfNumber IfIndexOrZero,
ibmSEEnabled INTEGER,
ibmSEName DisplayString,
ibmSEFrameSize INTEGER,
ibmSEMacCacheAge INTEGER,
ibmSERDCacheAge INTEGER,
ibmSEPriority INTEGER,
ibmSEMaxAge INTEGER,
ibmSEBridgeHelloTime INTEGER,
ibmSEBridgeForwardDelay INTEGER,
ibmSEBridgeAddress MacAddress,
ibmSEType INTEGER,
ibmSEConfigRowStatus RowStatus
}
ibmSEAtmIfNumber OBJECT-TYPE
SYNTAX IfIndexOrZero
-- Rsyntax INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The ATM interface number the Super ELAN (SE) bridging function
is associated with. This number is used to determine the NETWORK ID.
A SE Bridge (SEB) may span ATM adapters but they have to
be on the same network, as specified by the Network ID.
The specific requirement is that the LECs in the Super ELAN
can establish a Data Direct VCC.
The Network ID is an ATM configuration parameter that is required
to allow Data Direct VCC's to be established.
The value of this object must match an existing value in the ifTable.
This object is set to zero when the ATM interface is not
specified and the agent must determine itself which ATM
interface it is to use. If the agent can not determine a
default ATM interface an error should be returned by the
agent."
DEFVAL { 0 }
::= { ibmSEBridgeConfigEntry 1 }
ibmSEEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
When enabled(1) the SE Bridge (SEB) will bridge frames to the
ports defined in its bridging domain. When disabled(2) the SEB
will not bridge frames."
DEFVAL { enabled }
::= { ibmSEBridgeConfigEntry 2 }
ibmSEName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
-- Rsyntax OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This is a user provided name to associate with the SEB.
The SEB name is independent of the ELANs names of the
constituent ELANs of the SEB.
No default, name must be specified."
::= { ibmSEBridgeConfigEntry 3 }
ibmSEFrameSize OBJECT-TYPE
SYNTAX INTEGER {
en1516(1516),
tr4544(4544),
tr9234(9234),
tr18190(18190)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Indicates the maximum SuperElan frame size. All ELANs in a
single SEB must be set to the same maximum frame size.
Valid Values 1516, 4544, 9234, 18190
Default for Ethernet 1516, the Default for Token Ring is 4544
Since ibmSEType defaults to Token Ring the MIB documents
the ibmSEFrameSize DEFVAL to be 4544. However, if on row creation
ibmSEType is set to Ethernet sebEN(1), and ibmSEFrameSize
is not specified, the default value used by the agent should be
1516."
DEFVAL { tr4544 }
::= { ibmSEBridgeConfigEntry 4 }
ibmSEMacCacheAge OBJECT-TYPE
SYNTAX INTEGER(10..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The number of seconds a learned MAC address remains in the
data frame forwarding cache without revalidation."
DEFVAL { 300 }
::= { ibmSEBridgeConfigEntry 5 }
ibmSERDCacheAge OBJECT-TYPE
SYNTAX INTEGER(10..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The number of seconds a learned route descriptor remains in the
data frame forwarding cache without revalidation."
DEFVAL { 1800 }
::= { ibmSEBridgeConfigEntry 6 }
ibmSEPriority OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The SuperElan Bridge spanning tree priority.
A lower value will increase the likelihood of a SuperElan
bridge becoming the root. This value is appended to the
SuperElan Spanning Tree MAC Address to form a SuperElan
Bridge ID."
DEFVAL { 32768 }
::= { ibmSEBridgeConfigEntry 7 }
ibmSEMaxAge OBJECT-TYPE
SYNTAX INTEGER(6..40)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The age at which the current Spanning Tree configuration is
deemed too old. A value to small may cause the spanning tree to
unnecessarily reconfigure. A value to large will increase the
time it takes for the spanning tree to form once an outage
is detected."
DEFVAL { 20 }
::= { ibmSEBridgeConfigEntry 8 }
ibmSEBridgeHelloTime OBJECT-TYPE
SYNTAX INTEGER(1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The interval of time in seconds between the generation of
Spanning Tree configuration messages generate by the root.
Lower values increase the spanning tree robustness, but
increase network traffic overhead. Higher values decrease
network control traffic but decrease spanning tree robustness."
DEFVAL { 2 }
::= { ibmSEBridgeConfigEntry 9 }
ibmSEBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER(4..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The delay in seconds that the SEB waits before
transitioning to the next port state. The forward delay should
be large enough to allow all Super ELAN bridges in the
SuperELAN to disable ports in the new topology while the new
spanning tree is being set up prior to forwarding data frames.
Values too low might cause temporary loops in the SuperELAN,
because not all bridges will complete the spanning tree updates.
While values too large, lengthen network partitions after the
spanning tree has converged, which causes data frame delays.
The default value indicated that the bridge will begin forwarding
frames 30 seconds after the spanning tree has converged: 15 seconds
in listening state and 15 seconds in learning state."
DEFVAL { 15 }
::= { ibmSEBridgeConfigEntry 10 }
ibmSEBridgeAddress OBJECT-TYPE
SYNTAX MacAddress
-- Rsyntax OCTET STRING(SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The Bridge MAC Address identifies the SuperELAN for the purposes
of maintaining the SEB Spanning tree. If no value is configured,
the SEB interface with the lowest MAC address will be used. This
6 octet Spanning Tree MAC Address is added to the value of the
SuperELAN priority found in ibmSEPriority to create a SEB ID."
DEFVAL { '000000000000'h }
::= { ibmSEBridgeConfigEntry 11 }
ibmSEType OBJECT-TYPE
SYNTAX INTEGER {
sebEN(1),
sebTR(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object indicates the type of SEB. sebEN(1)
specifies a type of Ethernet, sebTR(2) specific's a type of
Token Ring."
DEFVAL { sebTR }
::= { ibmSEBridgeConfigEntry 12 }
ibmSEConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object is used to create or delete entries (rows)
in the SuperElan Bridge Configuration Table."
REFERENCE
"
RFC 1903, Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2)."
::= { ibmSEBridgeConfigEntry 13 }
ibmSEPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmSEPortConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains SuperELAN Bridge Port Configuration."
::= { ibmSuperELAN 3 }
ibmSEPortConfigEntry OBJECT-TYPE
SYNTAX IbmSEPortConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The configuration information for each SuperELAN Bridge Port"
INDEX { ibmSEBridgeId, ibmSEPortNum }
::= { ibmSEPortConfigTable 1 }
IbmSEPortConfigEntry ::= SEQUENCE {
ibmSEPortIfNumber INTEGER,
ibmSEPortElanName DisplayString,
ibmSEPortRemoteElan INTEGER,
ibmSEPortEnabled INTEGER,
ibmSEPortPriority INTEGER,
ibmSEPortRootCost INTEGER,
ibmSEPortRowStatus RowStatus
}
ibmSEPortIfNumber OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The interface number associated with this port."
::= { ibmSEPortConfigEntry 1 }
ibmSEPortElanName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
-- Rsyntax OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The ELAN Name in which the SuperElan Bridge LEC participates.
If the ELAN Name matches that of a LES/BUS on the same node,
a SEB-LEC interface is automatically added to the configuration,
and the SEB-LEC parameters needed to join the ELAN are read
from the local ELAN configuration. If the ELAN name does not
match that of a LES/BUS on the same node, the SEB-LEC must be
configured to join the specified ELAN.
No Default value a name must be specified."
::= { ibmSEPortConfigEntry 2 }
ibmSEPortRemoteElan OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object indicates whether or not the Super ELAN LE
Services (LES/BUS) for the ELAN specified by ibmSEPortElanName
are local to the same node as the port or not.
If false(2) the LE Services are local, if true(1) the LE Services
are remote (not resident at the same node as the SuperElan).
Default is local ELAN."
DEFVAL { false }
::= { ibmSEPortConfigEntry 3 }
ibmSEPortEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
When enabled(1) the SuperELAN will bridge frames through this
SEB port. When disabled(2) the SuperELAN will not bridge frames
through this port."
DEFVAL { enabled }
::= { ibmSEPortConfigEntry 4 }
ibmSEPortPriority OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This value influences which port is used when two or more
ports are connected to the same network segment. This situation
may cause a routing loop and a the priority provides a port selection
method. A lower value represents a higher priority.
?Is Define ports and interfaces as bit 16 going to be a problem.?
Put in to agent capabilities and check in agent.
"
DEFVAL { 128 }
::= { ibmSEPortConfigEntry 5 }
ibmSEPortRootCost OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The cost added to the root path cost in the Spanning Tree
configuration message received on this port in order to
determine the path cost to get to the root bridge through
this port. Setting this value small increases the probability
that this port will be close to the root bridge, and thus
asked to carry more broadcast and unknown unicast traffic."
DEFVAL { 32768 }
::= { ibmSEPortConfigEntry 6 }
ibmSEPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object is used to create or delete entries (rows)
in the SuperElan Bridge Port Configuration Table."
REFERENCE
"
RFC 1903, Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2)."
::= { ibmSEPortConfigEntry 7 }
ibmSEBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmSEBridgeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains bridge information for the SEB."
::= { ibmSuperELAN 4 }
ibmSEBridgeEntry OBJECT-TYPE
SYNTAX IbmSEBridgeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry (row) contains additional SEB pertaining to
a specific SEB instance."
INDEX { ibmSEBridgeId }
-- Augments ibmSEBridgeConfigEntry
::= { ibmSEBridgeTable 1 }
IbmSEBridgeEntry ::= SEQUENCE {
ibmSENumPorts INTEGER,
ibmSEProtocolSpecification INTEGER,
ibmSETimeSinceTopologyChange TimeTicks,
ibmSETopChanges Counter32,
ibmSEDesignatedRoot BridgeId,
ibmSERootCost INTEGER,
ibmSERootPort INTEGER,
ibmSEBridgeMaxAge Timeout,
ibmSEHelloTime Timeout,
ibmSEHoldTime INTEGER,
ibmSEForwardDelay Timeout,
ibmSEMacLearnedEntryDiscards Counter32,
ibmSERDLearnedEntryDiscards Counter32
}
ibmSENumPorts OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of ports defined for this SEB.
This number can be used to determine the next available
port number for row creation in any of the SEB Port Tables.
Of course the next available index is determined by adding
one to the number of ports defined."
::= { ibmSEBridgeEntry 1 }
ibmSEProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
tbSra(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The protocol type used for this SEB. Currently only
Transparent Bridging with Source Route Awareness (tbSra(2))
is the only defined protocol type for SEB's."
::= { ibmSEBridgeEntry 2 }
ibmSETimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { ibmSEBridgeEntry 3 }
ibmSETopChanges OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { ibmSEBridgeEntry 4 }
ibmSEDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
-- Rsyntax OCTET STRING(SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { ibmSEBridgeEntry 5 }
ibmSERootCost OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { ibmSEBridgeEntry 6 }
ibmSERootPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { ibmSEBridgeEntry 7 }
ibmSEBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout(1..65535)
-- Rsyntax INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { ibmSEBridgeEntry 8 }
ibmSEHelloTime OBJECT-TYPE
SYNTAX Timeout(1..65535)
-- Rsyntax INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { ibmSEBridgeEntry 9 }
ibmSEHoldTime OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { ibmSEBridgeEntry 10 }
ibmSEForwardDelay OBJECT-TYPE
SYNTAX Timeout(1..65535)
-- Rsyntax INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
ibmSEBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { ibmSEBridgeEntry 11 }
ibmSEMacLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Mac Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { ibmSEBridgeEntry 12 }
ibmSERDLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Route Descriptor Forwarding Database
entries, which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { ibmSEBridgeEntry 13 }
ibmSEStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmSEStpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains port-specific information and
Spanning Tree Protocol information for each SEB Port."
::= { ibmSuperELAN 5 }
ibmSEStpPortEntry OBJECT-TYPE
SYNTAX IbmSEStpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of SEB information maintained for each SEB port."
INDEX { ibmSEBridgeId, ibmSEPortNum }
-- Augments ibmSEPortConfigEntry
::= { ibmSEStpPortTable 1 }
IbmSEStpPortEntry ::= SEQUENCE {
ibmSEStpPortState INTEGER,
ibmSEStpPortDesignatedRoot BridgeId,
ibmSEStpPortDesignatedCost INTEGER,
ibmSEStpPortDesignatedBridge BridgeId,
ibmSEStpPortDesignatedPort INTEGER,
ibmSEStpPortForwardTransitions Counter32,
ibmSEPortMaxInfo INTEGER
}
ibmSEStpPortState OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1),
learning(2),
listening(3),
blocked(4),
configured(5),
netdown(6),
configuring(7),
unknown(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see ibmSEPortEnable), this object
will have a value of disabled(1).
forwarding(1) - port is in forwarding state
learning(2) - port is in learning state
listening(3) - port is in listening state
blocked(4) - this port is blocked by spanning tree
configured(5) - this port is waiting for spanning tree
netdown(6) - this ports network interface is down
configuring(7) - this port is loading LEC configuration
unknown(8) - this port is in some unknown state"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { ibmSEStpPortEntry 1 }
ibmSEStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
-- Rsyntax OCTET STRING(SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { ibmSEStpPortEntry 2 }
ibmSEStpPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { ibmSEStpPortEntry 3 }
ibmSEStpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
-- Rsyntax OCTET STRING(SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { ibmSEStpPortEntry 4 }
ibmSEStpPortDesignatedPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { ibmSEStpPortEntry 5 }
ibmSEStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { ibmSEStpPortEntry 6 }
ibmSEPortMaxInfo OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum size of the INFO (non-MAC) field that
this port will receive or transmit."
::= { ibmSEStpPortEntry 7 }
ibmSEPortDataStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmSEPortDataStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains statistics about LAN Emulation
Data Frame Statistics for Super ELAN Bridge ports."
::= { ibmSuperELAN 8 }
ibmSEPortDataStatisticsEntry OBJECT-TYPE
SYNTAX IbmSEPortDataStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of LE Data Frame statistical information
for each SEB port"
INDEX { ibmSEBridgeId, ibmSEPortNum }
-- Augments ibmSEPortConfigEntry
::= { ibmSEPortDataStatisticsTable 1 }
IbmSEPortDataStatisticsEntry ::= SEQUENCE {
ibmSEPortInFrames Counter32,
ibmSEPortOutFrames Counter32,
ibmSEPortRoutedInFrames Counter32,
ibmSEPortBpduFrames Counter32,
ibmSEPortInDiscards Counter32,
ibmSEPortDropSrcAddrFilters Counter32,
ibmSEPortDropDestAddrFilters Counter32,
ibmSEPortDropProtocolFilters Counter32,
ibmSEPortDropSrcNotFwds Counter32,
ibmSEPortDropDestNotFwds Counter32,
ibmSEPortDropInputOverflows Counter32,
ibmSEPortDropBpduOverflows Counter32,
ibmSEPortDropSrOverflows Counter32,
ibmSEPortRecNoBuffFailures Counter32,
ibmSEPortTransmitFailures Counter32,
ibmSEPortToBigFailures Counter32,
ibmSEPortLanIdFailures Counter32,
ibmSEPortStpLanIdFailures Counter32
}
ibmSEPortInFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { ibmSEPortDataStatisticsEntry 1 }
ibmSEPortOutFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { ibmSEPortDataStatisticsEntry 2 }
ibmSEPortRoutedInFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames received on this port that were routed, rather than,
or in addition to, bridged."
::= { ibmSEPortDataStatisticsEntry 3 }
ibmSEPortBpduFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Count of SE BPDU Frames"
::= { ibmSEPortDataStatisticsEntry 4 }
ibmSEPortInDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Count of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { ibmSEPortDataStatisticsEntry 5 }
ibmSEPortDropSrcAddrFilters OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames dropped due to Source Address filtering"
::= { ibmSEPortDataStatisticsEntry 6 }
ibmSEPortDropDestAddrFilters OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames dropped due to destination address filtering. These are
frames to destinations on the same LAN that they arrived on,
or otherwise filtered by the filtering database of the bridge."
::= { ibmSEPortDataStatisticsEntry 7 }
ibmSEPortDropProtocolFilters OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames dropped due to user filtering of particular protocol
identifiers."
::= { ibmSEPortDataStatisticsEntry 8 }
ibmSEPortDropSrcNotFwds OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames received on this port when it was not in forwarding
state (mostly in learning state)."
::= { ibmSEPortDataStatisticsEntry 9 }
ibmSEPortDropDestNotFwds OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames not sent because output port not in forwarding state.
Don't know which port they tag on yet."
::= { ibmSEPortDataStatisticsEntry 10 }
ibmSEPortDropInputOverflows OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frames dropped due to input queue overflow."
::= { ibmSEPortDataStatisticsEntry 11 }
ibmSEPortDropBpduOverflows OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
BPDU's dropped due to BPDU input queue overflow."
::= { ibmSEPortDataStatisticsEntry 12 }
ibmSEPortDropSrOverflows OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Source Route Frames dropped due to SR input queue overflow."
::= { ibmSEPortDataStatisticsEntry 13 }
ibmSEPortRecNoBuffFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Receive frames discarded due to no buffer available."
::= { ibmSEPortDataStatisticsEntry 14 }
ibmSEPortTransmitFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Frame Count of transmit failures."
::= { ibmSEPortDataStatisticsEntry 15 }
ibmSEPortToBigFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Count of frames to big to sent on this port."
::= { ibmSEPortDataStatisticsEntry 16 }
ibmSEPortLanIdFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Count of frames discarded due to mismatch in the LAN ID."
::= { ibmSEPortDataStatisticsEntry 17 }
ibmSEPortStpLanIdFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Count of frames discarded due to duplicate LAN ID or
spanning tree error."
::= { ibmSEPortDataStatisticsEntry 18 }
ibmBbcmConfigNextId OBJECT-TYPE
SYNTAX Integer32(0..214748364)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The next available index in the ibmBbcmConfigTable.
The value of this object can be used as the index by the
network manager to create an entry in the table.
This object is no longer required since the ibmBbcmConfigIndex
is now specified as the superElanID."
::= { ibmBbcmConfigGroup 1 }
ibmBbcmConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBbcmConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
This table contains configuration values for the Bridging
Broadcast Manager (BBCM)."
::= { ibmBbcmConfigGroup 2 }
ibmBbcmConfigEntry OBJECT-TYPE
SYNTAX IbmBbcmConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the table represents a configured instance
of the BBCM."
INDEX { ibmBbcmConfigIndex }
::= { ibmBbcmConfigTable 1 }
IbmBbcmConfigEntry ::= SEQUENCE {
ibmBbcmConfigIndex IbmSEBridgeID,
ibmBbcmName DisplayString,
ibmBbcmConfigRowStatus RowStatus
}
ibmBbcmConfigIndex OBJECT-TYPE
SYNTAX IbmSEBridgeID
-- Rsyntax INTEGER(1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
A value which uniquely identifies a conceptual row of the
BBCM Configuration Table.
Since BBCM is a bridge based function, each row of this table
identifies a unique bridge instance."
::= { ibmBbcmConfigEntry 1 }
ibmBbcmName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
-- Rsyntax OCTET STRING(SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This is the name associated with the bridge instance. It is
either the Super Elan Bridge name or the name assigned
to the base bridge."
::= { ibmBbcmConfigEntry 2 }
ibmBbcmConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object is used to create or
delete entries in the ibmBbcmConfigTable."
REFERENCE
"
RFC 1903, Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2)."
::= { ibmBbcmConfigEntry 3 }
ibmBbcmProtocolConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBbcmProtocolConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the table represents a configured instance
of a specific protocol for a particular BBCM instance."
::= { ibmBbcmConfigGroup 3 }
ibmBbcmProtocolConfigEntry OBJECT-TYPE
SYNTAX IbmBbcmProtocolConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the table represents a configuration information
for a specific protocol supported by a specific BBCM."
INDEX { ibmBbcmProtocolType, ibmBbcmConfigIndex }
::= { ibmBbcmProtocolConfigTable 1 }
IbmBbcmProtocolConfigEntry ::= SEQUENCE {
ibmBbcmProtocolType INTEGER,
ibmBbcmProtocolOperStatus INTEGER,
ibmBbcmProtocolAdminStatus INTEGER,
ibmBbcmProtocolCacheAge Integer32
}
ibmBbcmProtocolType OBJECT-TYPE
SYNTAX INTEGER {
reserved(1),
ip(2)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
BBCM Protocols Supported. For ease in implementation
the enumerated types for ibmBbcmProtocolType and
ibmBbcmStatProtocolType are equivalent.
Note: 1 is reserved so ibmBbcmStatProtocolType of 1 can be all.
This allows enumeration values to match between ibmBbcmProtocolType
and ibmBbcmStatProtocolType."
::= { ibmBbcmProtocolConfigEntry 1 }
ibmBbcmProtocolOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
up(2),
down(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The current BBCM Status
Note for this implementation other is defined only to be consistent
with standard LE server MIBs, it has no meaning for the definition."
::= { ibmBbcmProtocolConfigEntry 2 }
ibmBbcmProtocolAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(2),
down(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The desired state of the BBCM as prescribed by the
operator. The actions of the agent will, if at all possible,
eventually result in the desired state being reflected in the
ibmBbcmProtocolOperStatus."
::= { ibmBbcmProtocolConfigEntry 3 }
ibmBbcmProtocolCacheAge OBJECT-TYPE
SYNTAX Integer32(1..214748364)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The number of minutes a protocol is cached by BBCM before
being added due to inactivity."
::= { ibmBbcmProtocolConfigEntry 4 }
ibmBbcmStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmBbcmStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
This table contains activity statistics on a BBCM basis."
::= { ibmBbcmStatsGroup 1 }
ibmBbcmStatEntry OBJECT-TYPE
SYNTAX IbmBbcmStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the tables represents a BBCM protocol instance."
INDEX { ibmBbcmStatProtocolType, ibmBbcmConfigIndex }
::= { ibmBbcmStatTable 1 }
IbmBbcmStatEntry ::= SEQUENCE {
ibmBbcmStatProtocolType INTEGER,
ibmBbcmStatInReceives Counter32,
ibmBbcmStatInOctets Counter32,
ibmBbcmStatOutManaged Counter32,
ibmBbcmStatOutManagedOctets Counter32,
ibmBbcmStatOutNotManaged Counter32,
ibmBbcmStatOutNotManagedOctets Counter32,
ibmBbcmStatOutFiltered Counter32,
ibmBbcmStatOutFilteredOctets Counter32
}
ibmBbcmStatProtocolType OBJECT-TYPE
SYNTAX INTEGER {
allprotocols(1),
ip(2)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
BBCM Protocols Supported. For ease in implementation
the enumerated types for ibmBbcmProtocolType and
ibmBbcmStatProtocolType are equivalent.
When the protocol type is 1 (allprotocols) the response
contains the total count for all protocols supported by
this BBCM."
::= { ibmBbcmStatEntry 1 }
ibmBbcmStatInReceives OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of packets processed by BBCM for this protocol"
::= { ibmBbcmStatEntry 2 }
ibmBbcmStatInOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of Octets processed by BBCM for this protocol.
This count is of all octets seen, including control
information like headers."
::= { ibmBbcmStatEntry 3 }
ibmBbcmStatOutManaged OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of packets transformed by BBCM from broadcast to
unicast for this protocol."
::= { ibmBbcmStatEntry 4 }
ibmBbcmStatOutManagedOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of Octets transformed by BBCM from broadcast to
unicast for this protocol.
This count is of all octets seen, including control
information like headers."
::= { ibmBbcmStatEntry 5 }
ibmBbcmStatOutNotManaged OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of packets seen by BBCM that were left as they
were originally broadcast."
::= { ibmBbcmStatEntry 6 }
ibmBbcmStatOutNotManagedOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of octets seen by BBCM that were left as they
were originally broadcast.
This count is of all octets seen, including control
information like headers."
::= { ibmBbcmStatEntry 7 }
ibmBbcmStatOutFiltered OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of Packets Filtered by BBCM."
::= { ibmBbcmStatEntry 8 }
ibmBbcmStatOutFilteredOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Number of Octets Filtered by BBCM."
::= { ibmBbcmStatEntry 9 }
ibmVlanConfIndexNextID OBJECT-TYPE
SYNTAX IbmVlanIndex
-- Rsyntax Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This is the next available Vlan Index for this agent. If should be
used when creating rows in the Vlan tables indexed by ibmVlanConfIndex."
::= { ibmVlanGOGroup 1 }
ibmVlanTopologyChange OBJECT-TYPE
SYNTAX TimeStamp
-- Rsyntax TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This is the time stamp at which time the last VLAN Topology Change
occurred. This object can be used to monitor the change status of
the VLANs controlled by this agent.
A change is defined whenever a VLAN has been added, deleted
or changes configuration.
A change is also defined when a port is discovered or is aged out."
::= { ibmVlanGOGroup 2 }
ibmVlanMaxPortMap OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This is the maximum number of octets this agent supports
for representing ports in the the Port Map objects which use
the textual convention IbmVlanPortMap."
::= { ibmVlanGOGroup 3 }
ibmVlanMaxUDSWMaskFilter OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
This is the maximum number of octets this agent supports for
ibmVlanUDSWMask or ibmVlanUDSWFilter. The Mask and Filter must
contain the same number of octets."
::= { ibmVlanGOGroup 4 }
ibmVlanConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The layout of the VLAN MIB tables relies on common information
and VLAN type specific information.
The ibmVlanConfTable is the base table. Columns are added to
this table depending on the VLAN type, for example
ibmVlanIPConfTable is for IP VLANs, ibmVlanIPXConfTable is
for IPX VlANS, ibmVlanUDSWConfTable is for User Defined Sliding
Window based VLANs, and ibmVlanMacConfTable is for MAC address
defined VLANs. Associated with the extended configuration
table is a base status table, ibmVlanStatusTable. This table
covers generic status and the USDW and MAC VLAN status
requirements are currently defined. Specific status table additions
are provided by the ibmVlanIpStatusTable for IP criteria."
::= { ibmVlanConfGroup 1 }
ibmVlanConfEntry OBJECT-TYPE
SYNTAX IbmVlanConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the ibmVlanConfTable provides configuration information
pertaining to a specific instance of a VLAN."
INDEX { ibmVlanConfIndex }
::= { ibmVlanConfTable 1 }
IbmVlanConfEntry ::= SEQUENCE {
ibmVlanConfIndex IbmVlanIndex,
ibmVlanConfBridgeId IbmSEBridgeID,
ibmVlanConfType IbmVlanType,
ibmVlanConfAgingTimer UInteger32,
ibmVlanConfForwardingPortMap IbmVlanPortMap,
ibmVlanConfIncludedPortMap IbmVlanPortMap,
ibmVlanConfExcludedPortMap IbmVlanPortMap,
ibmVlanConfName DisplayString,
ibmVlanConfRowStatus RowStatus
}
ibmVlanConfIndex OBJECT-TYPE
SYNTAX IbmVlanIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
An index assigned by the agent which uniquely identifies an instance
of a VLAN. This objects value is NOT guaranteed to be the same value
across agent restarts."
::= { ibmVlanConfEntry 1 }
ibmVlanConfBridgeId OBJECT-TYPE
SYNTAX IbmSEBridgeID
-- Rsyntax INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The identifier of the Base Bridge or Super ELAN Bridge which
this VLAN is defined as an additional filter for."
::= { ibmVlanConfEntry 2 }
ibmVlanConfType OBJECT-TYPE
SYNTAX IbmVlanType
-- Rsyntax INTEGER {
-- ip(1),
-- ipx(2),
-- netbios(3),
-- userDefSldWindo(4),
-- mac(5),
-- byPort(6),
-- ipMulticast(7)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The type of VLAN."
::= { ibmVlanConfEntry 3 }
ibmVlanConfAgingTimer OBJECT-TYPE
SYNTAX UInteger32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The amount of time (in minutes) an auto-detect port will remain in
the forwarding domain of the VLAN in the absence of traffic from that
VLAN. A value of zero means forever."
DEFVAL { 5000 }
::= { ibmVlanConfEntry 4 }
ibmVlanConfForwardingPortMap OBJECT-TYPE
SYNTAX IbmVlanPortMap
-- Rsyntax OCTET STRING(SIZE(1..65535))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Defines which ports are in forwarding state for this VLAN. The VLAN
port is in forwarding state if one of the following is true:
The port has been statically included by setting the corresponding
port in ibmVlanIncludedPortMap.
The port is not excluded, corresponding port in ibmVlanExcludedPortMap
is zero, and the port has seen VLAN traffic in the current age out period,
as defined by ibmVlanConfAgingTimer."
::= { ibmVlanConfEntry 5 }
ibmVlanConfIncludedPortMap OBJECT-TYPE
SYNTAX IbmVlanPortMap
-- Rsyntax OCTET STRING(SIZE(1..65535))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Each of the bits in the port map represents a bridge port and
defines which ports are automatically and permanently included
from the forwarding domain of the VLAN. A value of 1 for the
port means it is included. A value of 0 means the port has to
be discovered (port traffic seen) to be included in the VLAN."
DEFVAL { '0'h }
::= { ibmVlanConfEntry 6 }
ibmVlanConfExcludedPortMap OBJECT-TYPE
SYNTAX IbmVlanPortMap
-- Rsyntax OCTET STRING(SIZE(1..65535))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Each of the bits in the port map represents a bridge port and
defines which ports are automatically and permanently excluded
from the forwarding domain of the VLAN. A value of 1 for the
port means it is excluded from the VLAN even if traffic for this
VLAN type is seen on this port. A value of 0 means the port can
be discovered."
DEFVAL { '0'h }
::= { ibmVlanConfEntry 7 }
ibmVlanConfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
-- Rsyntax OCTET STRING(SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
A node unique user defined name for the VLAN.
This name must be unique across all bridge instances at that node (agent)."
::= { ibmVlanConfEntry 8 }
ibmVlanConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object is used to create or delete entries (rows)
in the VLAN Configuration Table."
REFERENCE
"
RFC 1903, Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2)."
::= { ibmVlanConfEntry 9 }
ibmVlanIpConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanIpConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The IBM VLAN Configuration Table provides the definitions required
to configure an IBM IP or IP Multicast Protocol Virtual LAN (PVLAN)
This table defines the filters for the IP or IP Multicast PVLAN
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created."
::= { ibmVlanConfGroup 2 }
ibmVlanIpConfEntry OBJECT-TYPE
SYNTAX IbmVlanIpConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the ibmVlanIpConfTable provides configuration information
pertaining to a specific instance of an IP or IP Multicast PVLAN."
INDEX { ibmVlanConfIndex }
::= { ibmVlanIpConfTable 1 }
IbmVlanIpConfEntry ::= SEQUENCE {
ibmVlanIpNetworkAddr IpAddress,
ibmVlanIpNetworkMask IpAddress,
ibmVlanIpCutThruFromHere INTEGER,
ibmVlanIpCutThruToHere INTEGER
}
ibmVlanIpNetworkAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The IP or IP Multicast address of the local forwarding component
used to route or bridge traffic for this VLAN.
No default value. A default value must be specified when creating
an IP or IP Multicast VLAN."
::= { ibmVlanIpConfEntry 1 }
ibmVlanIpNetworkMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The IP address mask used to 'AND' against the IP address in a
received IP frame. The result of the 'AND' operation is compared to
the value given in the ibmVlanIPNetworkAddr in order to determine if
the frame belongs to the VLAN and should be forwarded.
There is no default value. A mask must be specified when creating an IP PVLAN
entry in the ibmVlanConfTable.
Note: if the ibmVlanConfType is IP Multicast ibmVlanIpNetworkMask
the ibmVlanIpNetworkMask is not used. A value 0.0.0.0 should be
returned by the agent."
::= { ibmVlanIpConfEntry 2 }
ibmVlanIpCutThruFromHere OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Specifies whether IP cut through communications originating from
this subnet are enabled."
DEFVAL { disabled }
::= { ibmVlanIpConfEntry 3 }
ibmVlanIpCutThruToHere OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Specifies whether IP cut through communications destined for
this subnet are enabled."
DEFVAL { disabled }
::= { ibmVlanIpConfEntry 4 }
ibmVlanIpxConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanIpxConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The IBM IPX VLAN Configuration Table provides the definitions required
to configure an IBM IPX Protocol Virtual LAN (PVLAN).
This table defines the filters for the IPX PVLAN.
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created."
::= { ibmVlanConfGroup 3 }
ibmVlanIpxConfEntry OBJECT-TYPE
SYNTAX IbmVlanIpxConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the ibmVlanIpxConfTable provides configuration information
pertaining to a specific instance of an IPX PVLAN."
INDEX { ibmVlanConfIndex }
::= { ibmVlanIpxConfTable 1 }
IbmVlanIpxConfEntry ::= SEQUENCE {
ibmVlanIpxNetworkAddr OCTET STRING(SIZE(4))
}
ibmVlanIpxNetworkAddr OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This is the VLANs IPX Network Address.
No Default Value, one must be specified when creating an IPX PVLAN
in the ibmVlanConfTable."
::= { ibmVlanIpxConfEntry 1 }
ibmVlanUDSWConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanUDSWConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
This table defines a 'sliding window' mechanism for the definition of
'policy' or 'user' defined VLANs. The mechanism is based on a set of
mask and filter fields that when compared to traffic data permit
forwarding decisions for the packet to be made for a VLAN.
The window may be moved or slide by defining the
appropriate offset type and offset values for the mask and filter
object fields.
Care must be taken to ensure the consistent configuration of VLAN
policies. Once a VLAN entry has been made in the table if a
change is made to any of the variables in that row for the VLAN
then all other entries in other nodes associated with the VLAN
must be updated in a corresponding manner!
This table is an auxiliary extension to the base VLAN configuration
table defined in ibmVlanConfTable.
See that table for additional Vlan details.
"
::= { ibmVlanConfGroup 4 }
ibmVlanUDSWConfEntry OBJECT-TYPE
SYNTAX IbmVlanUDSWConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the ibmVlanUDSWConfTable provides configuration information
pertaining to a specific instance of an UDSW VLAN.
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created."
INDEX { ibmVlanConfIndex }
::= { ibmVlanUDSWConfTable 1 }
IbmVlanUDSWConfEntry ::= SEQUENCE {
ibmVlanUDSWOffsetType INTEGER,
ibmVlanUDSWOffset INTEGER,
ibmVlanUDSWMask OCTET STRING,
ibmVlanUDSWFilter OCTET STRING
}
ibmVlanUDSWOffsetType OBJECT-TYPE
SYNTAX INTEGER {
udswMacOffset(1),
udswInfoOffset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object specifies the base location in the traffic frame where
the ibmVlanUDSWOffset will be used to start the comparison with the
ibmVlanUDSWFilter value to determine if this frame is in a Sliding
Window Vlan.
Two starting location modes are predefined for LAN Emulation VLANs.
udswMacOffset indicates that the starting location is the first byte
of the MAC destination address in the traffic frame. This mode may be
used for VLAN filtering on MAC addresses, for both Token Ring traffic and
Ethernet traffic. The ibmVlanMacConfTable however should be used to
define source MAC address based VLANs. This mode may also be used for
VLAN filtering on protocol and address information or for other user
specified information found in a portion of the LLC information field
when source routed Token Ring traffic is NOT the traffic source (due
to the presence of the variable size Routing Information Field).
udswInfoOffset is a generic way of indicating that the starting
location is at the first byte of the LLC information field.
This mode may be used for VLAN filtering on protocol and address
information or for other user specified information found in a
portion of the LLC information field. For source routed Token Ring,
this location is not static within the frame since the
Routing Information Field (RIF) is of variable length depending
on LAN segments in the route. Specifying this mode permits the
offset to begin relative to the end of the last byte of the RIF.
There is no default value for this entry. The offset type
must be defined when creating a user defined sliding window VLAN
in the ibmVlanConfTable."
::= { ibmVlanUDSWConfEntry 1 }
ibmVlanUDSWOffset OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object determines the starting location in the traffic frame
that will be used in the comparison with the ibmVlanUDSWFilter
value to determine if this frame is in a Sliding Window Vlan.
It is specified as a value offset indicating the number of octets
from the base location determined by the mode selected in the
ibmVlanUSDWOffsetType.
udswMacOffset mode indicates that the starting location for the
compare is ibmVlanUDSWOffset octets after the the first byte
of the MAC destination address.
udswInfoOffset mode indicates that the starting location is
ibmVlanUDSWOffset octets after the start of the frame's
information field.
There is no default value and this offset selection mode must be
defined when creating a UDSW VLAN in the ibmVlanConfTable."
::= { ibmVlanUDSWConfEntry 2 }
ibmVlanUDSWMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object determines the size and bit pattern that is compared to
the traffic frame at the location specified by the offset type and
starting at the offset location in order to produce a result.
The size of the mask must be equivalent to the size of the filter
defined in ibmVlanUDSWFilter. The value of 1 in a mask bit location
has the effect of making a comparison of the mask to the traffic
frame significant. The value of a zero in a mask bit location has
the effect of making the comparison of the mask with the traffic
frame a 'don't care'.
The octets in this object are transmitted in most significant byte
first order.
There is no default value and this mask must be specified when
creating a UDSW VLAN in the ibmVlanConfTable."
::= { ibmVlanUDSWConfEntry 3 }
ibmVlanUDSWFilter OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object determines the size and bit pattern that is compared to
the result after the mask being applied to the traffic frame
at the location specified by the offset type and starting at
the offset location.
The size of the filter must be equivalent to the size of the
mask defined in ibmVlanUDSWMask.
If the result exactly matches the bit values defined in the filter
then the frame is forwarded to the VLAN identified by the index
for this table entry.
The octets in this object are transmitted in most significant byte
first order.
There is no default value and this filter must be specified when
creating a UDSW VLAN in the ibmVlanConfTable."
::= { ibmVlanUDSWConfEntry 4 }
ibmVlanMacConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanMacConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The IBM MAC VLAN Configuration Table provides the definitions required
to configure an IBM MAC Virtual LAN (VLAN).
This table defines the filters for the IBM MAC VLAN.
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created."
::= { ibmVlanConfGroup 5 }
ibmVlanMacConfEntry OBJECT-TYPE
SYNTAX IbmVlanMacConfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry of the ibmVlanMacConfTable provides configuration information
pertaining to a specific instance of a MAC VLAN."
INDEX { ibmVlanConfIndex, ibmVlanMacAddrIndex }
::= { ibmVlanMacConfTable 1 }
IbmVlanMacConfEntry ::= SEQUENCE {
ibmVlanMacAddrIndex Integer32,
ibmVlanMacAddresses OCTET STRING,
ibmVlanMacAddrConfRowStatus RowStatus
}
ibmVlanMacAddrIndex OBJECT-TYPE
SYNTAX Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The MAC address index being used as a filter for this MAC address VLAN."
::= { ibmVlanMacConfEntry 1 }
ibmVlanMacAddresses OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..600))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
A string of Source MAC addresses being used as a filter for this
MAC address VLAN."
::= { ibmVlanMacConfEntry 2 }
ibmVlanMacAddrConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
This object is used to create or delete entries (rows)
in the MAC Address Configuration Table."
REFERENCE
"
RFC 1903, Textual Conventions for version 2 of the
Simple Network Management Protocol (SNMPv2)."
::= { ibmVlanMacConfEntry 3 }
ibmVlanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The IBM VLAN Status Table provides the administration and
statistics for an IBM Virtual LAN (VLAN)."
::= { ibmVlanStatusGroup 1 }
ibmVlanStatusEntry OBJECT-TYPE
SYNTAX IbmVlanStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry in the ibmVlanStatusTable augments a specific
instance of an IP VLAN."
INDEX { ibmVlanConfIndex }
-- Augments ibmVlanConfEntry
::= { ibmVlanStatusTable 1 }
IbmVlanStatusEntry ::= SEQUENCE {
ibmVlanOperStatus INTEGER,
ibmVlanAdminStatus INTEGER,
ibmVlanProcessedPackets Counter32,
ibmVlanDiscardedPackets Counter32,
ibmVlanDiscPktsMac MacAddress
}
ibmVlanOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
Current state of the VLAN"
::= { ibmVlanStatusEntry 1 }
ibmVlanAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
Desired state of the VLAN. This change becomes immediate
on completion of the set operation and does not require system restart."
::= { ibmVlanStatusEntry 2 }
ibmVlanProcessedPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of Broadcast/Multicast packets received by this VLAN."
::= { ibmVlanStatusEntry 3 }
ibmVlanDiscardedPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of Broadcast packets discarded by this VLAN
because the source VLAN was excluded on the port."
::= { ibmVlanStatusEntry 4 }
ibmVlanDiscPktsMac OBJECT-TYPE
SYNTAX MacAddress
-- Rsyntax OCTET STRING(SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The object contains the Source MAC address from the last packet that
was discarded because the source VLAN was excluded on the port.
This will aid in finding the station that is being excluded.
This object is defined as read-write so that a manager can clear
the current Source MAC address after identifying the station that
is trying to transmit on an excluded port. In order to clear the
object the manager can specify a MAC address of all zeros 0x000000000000."
::= { ibmVlanStatusEntry 5 }
ibmVlanIpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmVlanIpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
The IBM IP VLAN Status Table provides the administration and
statistics for an IBM IP Protocol Virtual LAN (PVLAN)."
::= { ibmVlanStatusGroup 2 }
ibmVlanIpStatusEntry OBJECT-TYPE
SYNTAX IbmVlanIpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
Each entry in the ibmVlanIpStatusTable augments a specific
instance of an IP PVLAN."
INDEX { ibmVlanConfIndex }
-- Augments ibmVlanIpConfEntry
::= { ibmVlanIpStatusTable 1 }
IbmVlanIpStatusEntry ::= SEQUENCE {
ibmVlanIpCutThruFromPkts Counter32,
ibmVlanIpCutThruToPkts Counter32,
ibmVlanIpCutThruFromDiscPkts Counter32,
ibmVlanIpCutThruToDiscPkts Counter32
}
ibmVlanIpCutThruFromPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of Broadcast/Multicast packets cutThru from this VLAN."
::= { ibmVlanIpStatusEntry 1 }
ibmVlanIpCutThruToPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of Broadcast/Multicast packets received to this VLAN."
::= { ibmVlanIpStatusEntry 2 }
ibmVlanIpCutThruFromDiscPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of Broadcast/Multicast packets discarded because cutThru
from this VLAN was disabled."
::= { ibmVlanIpStatusEntry 3 }
ibmVlanIpCutThruToDiscPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
The number of Broadcast/Multicast packets discarded before it is forwarded
because cutThru to this VLAN was disabled."
::= { ibmVlanIpStatusEntry 4 }
ibmLeCServerXMonLECSGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 1 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
--
-- These are the objects are used to support LECS
-- objects
-- ibmLeServerXMonLecsInstances, ibmLeServerXLecsUsedConnections
ibmLeCServerXMonLESGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 2 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
--
-- These are the objects are used to support LES
-- objects
-- ibmLeServerXMonLesInstances,
-- ibmLeServerXLesMonUsedConnections,
-- ibmLeServerXLesMonLesLecInstances, ibmLeServerXLesMinLecID,
-- ibmLeServerXLesMaxLecID
ibmLeCServerXMonBUSGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 3 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
--
-- These are the objects are used to support BUS
-- objects
-- ibmLeServerXMonBusInstances,
-- ibmLeServerXBusMonUsedConnections,
-- ibmLeServerXBusMonBusLecInstances
ibmCSuperELANGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 4 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
--
-- These are the objects are used to support SuperELAN
-- objects
-- ibmSEPortArpRequestsIn, ibmSEPortArpRequestsOut,
-- ibmSEArpRequestsErrors, ibmSEPortArpRequestsFiltered,
-- ibmSEPortArpRepliesIn, ibmSEPortArpRepliesOut,
-- ibmSEPortArpRepliesErrors, ibmSEPortNarpRequestsIn,
-- ibmSEPortNarpRequestsOut, ibmSEPortFlushRequestsIn,
-- ibmSEPortFlushRequestsOut, ibmSEPortFlushRepliesIn,
-- ibmSEPortFlushRepliesOut, ibmSEPortFlushRequestErrors,
-- ibmSEPortFlushRepliesErrors, ibmSEPortLeCtrlFramesIn,
-- ibmSEPortLeCtrlFramesOut,
-- ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd,
-- ibmSEPortLeCtrlFramesDiscDestPortNotFwrd, ibmSEAtmIfNumber,
-- ibmSEEnabled, ibmSEName, ibmSEFrameSize, ibmSEMacCacheAge,
-- ibmSERDCacheAge, ibmSEPriority, ibmSEMaxAge,
-- ibmSEBridgeHelloTime, ibmSEBridgeForwardDelay,
-- ibmSEBridgeAddress, ibmSEType, ibmSEConfigRowStatus,
-- ibmSEPortIfNumber, ibmSEPortElanName, ibmSEPortRemoteElan,
-- ibmSEPortEnabled, ibmSEPortPriority, ibmSEPortRootCost,
-- ibmSEPortRowStatus, ibmSENumPorts, ibmSEProtocolSpecification,
-- ibmSETimeSinceTopologyChange, ibmSETopChanges,
-- ibmSEDesignatedRoot, ibmSERootCost, ibmSERootPort,
-- ibmSEBridgeMaxAge, ibmSEHelloTime, ibmSEHoldTime,
-- ibmSEForwardDelay, ibmSEMacLearnedEntryDiscards,
-- ibmSERDLearnedEntryDiscards, ibmSEStpPortState,
-- ibmSEStpPortDesignatedRoot, ibmSEStpPortDesignatedCost,
-- ibmSEStpPortDesignatedBridge, ibmSEStpPortDesignatedPort,
-- ibmSEStpPortForwardTransitions, ibmSEPortMaxInfo,
-- ibmSEPortInFrames, ibmSEPortOutFrames,
-- ibmSEPortRoutedInFrames, ibmSEPortBpduFrames,
-- ibmSEPortInDiscards, ibmSEPortDropSrcAddrFilters,
-- ibmSEPortDropDestAddrFilters, ibmSEPortDropProtocolFilters,
-- ibmSEPortDropSrcNotFwds, ibmSEPortDropDestNotFwds,
-- ibmSEPortDropInputOverflows, ibmSEPortDropBpduOverflows,
-- ibmSEPortDropSrOverflows, ibmSEPortRecNoBuffFailures,
-- ibmSEPortTransmitFailures, ibmSEPortToBigFailures,
-- ibmSEPortLanIdFailures, ibmSEPortStpLanIdFailures
ibmCBbcmMIBGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 5 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
--
-- These are the objects are used to support BBCM
-- objects
-- ibmBbcmName, ibmBbcmConfigRowStatus,
-- ibmBbcmProtocolOperStatus, ibmBbcmProtocolAdminStatus,
-- ibmBbcmProtocolCacheAge, ibmBbcmStatInReceives,
-- ibmBbcmStatInOctets, ibmBbcmStatOutManaged,
-- ibmBbcmStatOutManagedOctets, ibmBbcmStatOutNotManaged,
-- ibmBbcmStatOutNotManagedOctets, ibmBbcmStatOutFiltered,
-- ibmBbcmStatOutFilteredOctets
ibmCVlanMIBGroup OBJECT IDENTIFIER ::= { ibmLeMIBGroups 6 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
--
-- These are the objects are used to support VLAN
-- objects
-- ibmVlanConfIndexNextID, ibmVlanTopologyChange,
-- ibmVlanMaxPortMap, ibmVlanMaxUDSWMaskFilter, ibmVlanConfIndex,
-- ibmVlanConfBridgeId, ibmVlanConfType, ibmVlanConfAgingTimer,
-- ibmVlanConfForwardingPortMap, ibmVlanConfIncludedPortMap,
-- ibmVlanConfExcludedPortMap, ibmVlanConfName,
-- ibmVlanConfRowStatus, ibmVlanIpNetworkAddr,
-- ibmVlanIpNetworkMask, ibmVlanIpCutThruFromHere,
-- ibmVlanIpCutThruToHere, ibmVlanIpxNetworkAddr,
-- ibmVlanUDSWOffsetType, ibmVlanUDSWOffset, ibmVlanUDSWMask,
-- ibmVlanUDSWFilter, ibmVlanMacAddrIndex, ibmVlanMacAddresses,
-- ibmVlanMacAddrConfRowStatus, ibmVlanOperStatus,
-- ibmVlanAdminStatus, ibmVlanProcessedPackets,
-- ibmVlanDiscardedPackets, ibmVlanDiscPktsMac,
-- ibmVlanIpCutThruFromPkts, ibmVlanIpCutThruToPkts,
-- ibmVlanIpCutThruFromDiscPkts, ibmVlanIpCutThruToDiscPkts
ibmLeMIBCompliance OBJECT IDENTIFIER ::= { ibmLeMIBCompliances 1 }
-- MODULE-COMPLIANCE
-- Status
-- mandatory
-- Descr
-- The compliance statement for SNMP IBM extensions
-- for ATM emulated LANs.
-- Module
-- >>current<<
-- OptGroup
-- ibmLeCServerXMonLECSGroup
-- OptGroup
-- ibmLeCServerXMonLESGroup
-- OptGroup
-- ibmLeCServerXMonBUSGroup
-- OptGroup
-- ibmCSuperELANGroup
-- OptGroup
-- ibmCBbcmMIBGroup
-- OptGroup
-- ibmCVlanMIBGroup
END