mibs/MIBS/junose/Juniper-ISIS-MIB

3078 lines
110 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************************
-- Juniper-ISIS-MIB
--
-- Juniper Networks Enterprise MIB
-- Integrated IS-IS MIB
--
-- Copyright (c) 1997 The Internet Society.
-- Copyright (c) 2000, 2001 Unisphere Networks, Inc.
-- Copyright (c) 2002 Juniper Networks, Inc.
-- All Rights Reserved.
-- *****************************************************************************
Juniper-ISIS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, IpAddress, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndexOrZero
FROM IF-MIB
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue
FROM SNMPv2-TC
juniMibs
FROM Juniper-MIBs;
juniIsisMIB MODULE-IDENTITY
LAST-UPDATED "200603131430Z" -- 13-Mar-06 02:30 PM EST
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"
DESCRIPTION
"The intermediate system to intermediate system (IS-IS) routing protocol
MIB for Juniper Networks E-series products. This MIB provides
objects for management of the IS-IS Routing protocol, as described in
ISO 10589, when it is used to construct routing tables for IP networks,
as described in RFC 1195."
-- Revision History
REVISION "200612131330Z" -- 13-Dec-06 01:30 PM EST - JUNOSe 8.0
DESCRIPTION
"Modifiled width of juniIsisMplsTeTunnelName from 32 to 40"
REVISION "200603011430Z" -- 13-Mar-06 02:30 PM EST - JUNOSe 7.4
DESCRIPTION
"Added juniIsisSysReferenceBandwidth and juniIsisSysHighReferenceBandwidth
to juniIsisSysEntry"
REVISION "200603011430Z" -- 01-Mar-06 02:30 PM EST - JUNOSe 7.4
DESCRIPTION
"Added juniIsisSysMplsTeSpfUseAnyBestPath to juniIsisSysEntry.
Added juniIsisMplsTeTunnelTable to juniIsisSystemGroup"
REVISION "200512261430Z" -- 26-Dec-05 09:30 AM EST - JUNOSe 7.0
DESCRIPTION
"Default value for juniIsisSysLSPIgnoreErrors is changed from false to true.
Default value for juniIsisCircMeshGroup =1 is removed"
REVISION "200510210810Z" -- 21-Oct-05 03:10 AM EST - RX 6.1.0
DESCRIPTION
"L2 Buffer Size is added and is made obsolete."
REVISION "200503291430Z" -- 29-Mar-05 09:30 AM EST - JUNOSe 7.0
DESCRIPTION
"Updated the SystemID TEXTUAL-CONVENTION to be inline with standard
- SystemID should now be exactly 6 bytes.
- SystemID description modified. All zeros are invalid."
REVISION "200501170810Z" -- 17-Jan-05 03:10 AM EST - RX 6.1.0
DESCRIPTION
"Updated the upper bound for Max Split Paths and removed the
L2 Buffer Size"
REVISION "200501060504Z" -- 06-Jan-05 01:04 AM EST - JUNOSe 7.0
DESCRIPTION
"Modified the default value for the juniIsisSysSetOverloadBitStartupDuration
object. This object has a meaning only if the ISIS overload bit
is set."
REVISION "200411020504Z" -- 02-Nov-04 01:04 AM EST - RX 5.2.2
DESCRIPTION
"Updated the upper bound for Authentication Key Id in Area
Authentication, Domain Authentication, L1 Circuit and L2 Circuit
Tables."
REVISION "200410181414Z" -- 18-Oct-04 09:14 AM EST - RX 5.0.4
DESCRIPTION
"Changed the lower bound value & default value of juniIsisSysSetOverloadBitStartupDuration
from 0 to 5."
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
DESCRIPTION
"Replaced Unisphere names with Juniper names."
REVISION "200112102129Z" -- 10-Dec-01 04:29 PM EST - JUNOSe 4.0
DESCRIPTION
"Added MPLS support."
REVISION "200112071522Z" -- 07-Dec-01 10:22 AM EST - JUNOSe 3.3
DESCRIPTION
"Added support for simple password protection."
REVISION "200104172126Z" -- 17-Apr-01 05:26 PM EDT - JUNOSe 3.0
DESCRIPTION
"Add circuit state object."
REVISION "200002220000Z" -- 22-Feb-00 - JUNOSe 2.0
DESCRIPTION
"Initial version of this MIB module, based on draft-ietf-isis-wg-mib."
::= { juniMibs 38 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- Type definitions
--
OSINSAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"OSI Network Service Address, e.g. NSAP, Network Entity Title"
SYNTAX OCTET STRING (SIZE(0..20))
SystemID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A system ID of exactly six bytes.
Must not be all zeros."
SYNTAX OCTET STRING (SIZE(6))
OperState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type used in enabling and disabling a row."
SYNTAX INTEGER {
off(1),
on(2) }
AuthTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Then number of seconds since Jan. 1 1970."
SYNTAX Integer32
LSPBuffSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub range for LSP size."
SYNTAX Integer32 (512..9180)
LevelState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"States of the ISIS protocol."
SYNTAX INTEGER {
off(1),
on(2),
waiting(3) }
SupportedProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Types of network protocol supported by Integrated ISIS. The values for
ISO8473 and IP are those registered for these protocols in ISO TR9577."
SYNTAX INTEGER {
iso8473(129),
ip(204),
ipV6(205) }
JuniDefaultMetric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub-range for default metric for single hop. The value is
truncated to 63 when the juniIsisSysL1MetricStyle or
juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow "
SYNTAX Integer32 (0..16777215)
OtherMetric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub-range for metrics other than the default metric for single
hop."
SYNTAX Integer32 (0..63)
CircuitID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ID for a circuit."
SYNTAX OCTET STRING (SIZE(2..9))
ISPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Integer sub-range for ISIS priority."
SYNTAX Integer32 (1..127)
-- Behaviour Definitions
-- ResettingTimer behaviour definition
-- "This object specifies the interval between certain events in
-- the operation of the protocol state machine. If the value of
-- this object is set to a new value while the protocol state
-- machine is in operation, the implementation shall take the
-- necessary steps to ensure that for any time interval which
-- was in progress when the value of the corresponding object
-- was changed, the next expiration of that interval takes place
-- the specified time after the original start of that interval,
-- or immediately, whichever is later. The precision with which
-- this time shall be implemented shall be the same as that
-- associated with the basic operation of the timer object."
-- OperationalState behaviour definition
-- "This object controls the enabling and disabling of the
-- corresponding table row. Setting this object to the value
-- off has the effect of disabling the corresponding row.
-- Setting this object to the value on has the effect of
-- enabling the corresponding row. Setting the value of this
-- object to the same value as its current value has no effect.
-- If the table entry also contains an object controlling the
-- RowStatus then the object following the operationalState
-- behaviour shall not be set to on when the object following
-- the RowStatus behaviour has value off. An attempt to do
-- so is rejected."
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniIsisObjects OBJECT IDENTIFIER ::= { juniIsisMIB 1 }
juniIsisTrapGroup OBJECT IDENTIFIER ::= { juniIsisMIB 2 }
juniIsisConformance OBJECT IDENTIFIER ::= { juniIsisMIB 3 }
juniIsisSystemGroup OBJECT IDENTIFIER ::= { juniIsisObjects 1}
juniIsisCircuitGroup OBJECT IDENTIFIER ::= { juniIsisObjects 2 }
juniIsisSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of instances of the Integrated IS-IS protocol existing on the
system."
::= { juniIsisSystemGroup 1 }
juniIsisSysEntry OBJECT-TYPE
SYNTAX JuniIsisSysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row defines information specific to a single instance of the
protocol existing on the system."
REFERENCE
"ISIS.poi cLNSISISBasic-P (1)"
INDEX { juniIsisSysInstance }
::= { juniIsisSysTable 1 }
JuniIsisSysEntry ::= SEQUENCE {
juniIsisSysInstance Integer32,
juniIsisSysVersion DisplayString,
juniIsisSysType INTEGER,
juniIsisSysID SystemID,
juniIsisSysMaxPathSplits Integer32,
juniIsisSysMaxLSPGenInt Integer32,
juniIsisSysOrigLSPBuffSize LSPBuffSize,
juniIsisSysMaxAreaAddresses Integer32,
juniIsisSysMinL1LSPGenInt Integer32,
juniIsisSysMinL2LSPGenInt Integer32,
juniIsisSysPollESHelloRate Integer32,
juniIsisSysWaitTime Integer32,
juniIsisSysOperState OperState,
juniIsisSysL1State LevelState,
juniIsisSysCorrLSPs Counter32,
juniIsisSysLSPL1DbaseOloads Counter32,
juniIsisSysManAddrDropFromAreas Counter32,
juniIsisSysAttmptToExMaxSeqNums Counter32,
juniIsisSysSeqNumSkips Counter32,
juniIsisSysOwnLSPPurges Counter32,
juniIsisSysIDFieldLenMismatches Counter32,
juniIsisSysMaxAreaAddrMismatches Counter32,
juniIsisSysOrigL2LSPBuffSize LSPBuffSize,
juniIsisSysL2State LevelState,
juniIsisSysLSPL2DbaseOloads Counter32,
juniIsisSysAuthFails Counter32,
juniIsisSysLSPIgnoreErrors TruthValue,
juniIsisSysMaxAreaCheck TruthValue,
juniIsisSysSetOverloadBit TruthValue,
juniIsisSysSetOverloadBitStartupDuration Integer32,
juniIsisSysMaxLspLifetime Integer32,
juniIsisSysL1SpfInterval Integer32,
juniIsisSysL2SpfInterval Integer32,
juniIsisSysIshHoldTime Integer32,
juniIsisSysIshConfigTimer Integer32,
juniIsisSysDistributeDomainWide TruthValue,
juniIsisSysDistance Integer32,
juniIsisSysL1MetricStyle INTEGER,
juniIsisSysL2MetricStyle INTEGER,
juniIsisSysIsoRouteTag OCTET STRING,
juniIsisSysMplsTeLevel INTEGER,
juniIsisSysMplsTeRtrIdIfIndex InterfaceIndexOrZero,
juniIsisSysMplsTeSpfUseAnyBestPath TruthValue,
juniIsisSysReferenceBandwidth Gauge32,
juniIsisSysHighReferenceBandwidth Gauge32 }
juniIsisSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysEntry 1 }
juniIsisSysVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the IS-IS protocol to which this instance
conforms. This value must be set by the implementation when the row is
valid."
REFERENCE
"ISIS.aoi version (1)"
::= { juniIsisSysEntry 2 }
juniIsisSysType OBJECT-TYPE
SYNTAX INTEGER {
level1IS(1),
level1l2IS(2),
level2Only(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of this instance of the Integrated IS-IS protocol. This
object follows the replaceOnlyWhileDisabled behaviour."
REFERENCE
"ISIS.aoi iSType (2)"
::= { juniIsisSysEntry 3 }
juniIsisSysID OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID for this instance of the Integrated IS-IS protocol. This value
is appended to each of the instance's area addresses to form the Network
Entity Titles valid for this instance. The derivation of a value for
this object is implementation-specific. Some implementations may assign
values and not permit write MAX-ACCESS, others may require the value to
be set manually."
REFERENCE
"ISIS.aoi systemId (119)"
::= { juniIsisSysEntry 4 }
juniIsisSysMaxPathSplits OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of paths with equal routing metric value which it is
permitted to split between. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE
"ISIS.aoi maximumPathSplits (3)"
DEFVAL { 4 }
::= { juniIsisSysEntry 5 }
juniIsisSysMaxLSPGenInt OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum interval, in seconds, between generated LSPs by this instance.
This object follows the resettingTimer behaviour."
REFERENCE
"ISIS.aoi maximumLSPGenerationInterval (6)"
DEFVAL { 900 }
::= { juniIsisSysEntry 6 }
juniIsisSysOrigLSPBuffSize OBJECT-TYPE
SYNTAX LSPBuffSize
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of LSPs and SNPs originated by this instance.
This object follows the replaceOnlyWhileDisabled behaviour."
REFERENCE
"ISIS.aoi originatingLSPBufferSize (9)"
DEFVAL { 1497 }
::= { juniIsisSysEntry 7 }
juniIsisSysMaxAreaAddresses OBJECT-TYPE
SYNTAX Integer32 (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of area addresses to be permitted for the area in
which this instance exists. Note that all Intermediate Systems in the
same area must have the same value configured for this attribute if
correct operation is to be assumed. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE
"ISIS.aoi maximumAreaAddresses (4)"
DEFVAL { 3 }
::= { juniIsisSysEntry 8 }
juniIsisSysMinL1LSPGenInt OBJECT-TYPE
SYNTAX Integer32 (0..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between successive generation of L1 LSPs
with the same LSPID by this instance. This object follows the
resettingTimer behaviour."
REFERENCE
"ISIS.aoi minimumLSPGenerationInterval (11)"
DEFVAL { 5 }
::= { juniIsisSysEntry 9 }
juniIsisSysMinL2LSPGenInt OBJECT-TYPE
SYNTAX Integer32 (0..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between successive generation of L2 LSPs
with the same LSPID by this instance. This object follows the
resettingTimer behaviour."
REFERENCE
"ISIS.aoi minimumLSPGenerationInterval (11)"
DEFVAL { 5 }
::= { juniIsisSysEntry 10 }
juniIsisSysPollESHelloRate OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value, in seconds, to be used for the suggested ES configuration
timer in ISH PDUs when soliciting the ES configuration."
REFERENCE
"ISIS.aoi pollESHelloRate (13)"
DEFVAL { 10 }
::= { juniIsisSysEntry 11 }
juniIsisSysWaitTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds to delay in waiting state before entering on state.
This object follows the resettingTimer behaviour."
REFERENCE
"ISIS.aoi waitingTime (15)"
DEFVAL { 60 }
::= { juniIsisSysEntry 12 }
juniIsisSysOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operational state of this instance of the Integrated IS-IS
protocol. Setting this object to the value on when its current value is
off enables operation of this instance of the Integrated IS-IS
protocol."
DEFVAL { off }
::= { juniIsisSysEntry 13 }
juniIsisSysL1State OBJECT-TYPE
SYNTAX LevelState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Level 1 database."
REFERENCE
"ISIS.aoi l1State (17)"
::= { juniIsisSysEntry 14 }
juniIsisSysCorrLSPs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of corrupted LSPs detected."
REFERENCE
"ISIS.aoi corruptedLSPsDetected (19)"
::= { juniIsisSysEntry 15 }
juniIsisSysLSPL1DbaseOloads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the LSP L1 database has become overloaded."
REFERENCE
"ISIS.aoi lSPL1DatabaseOverloads (20)"
::= { juniIsisSysEntry 16 }
juniIsisSysManAddrDropFromAreas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a manual address has been dropped from the area."
REFERENCE
"ISIS.aoi manualAddressesDroppedFromArea (21)"
::= { juniIsisSysEntry 17 }
juniIsisSysAttmptToExMaxSeqNums OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the IS has attempted to exceed the maximum sequence
number."
REFERENCE
"ISIS.aoi attemptsToExceedmaximumSequenceNumber (22)"
::= { juniIsisSysEntry 18 }
juniIsisSysSeqNumSkips OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a sequence number skip has occurred."
REFERENCE
"ISIS.aoi sequenceNumberSkips (23)"
::= { juniIsisSysEntry 19 }
juniIsisSysOwnLSPPurges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a zero-aged copy of the system's own LSP is received
from some other node."
REFERENCE
"ISIS.aoi ownLSPPurges (24)"
::= { juniIsisSysEntry 20 }
juniIsisSysIDFieldLenMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a PDU is received with a different value for ID field
length to that of the receiving system."
REFERENCE
"ISIS.aoi iDFieldLengthMismatches (25)"
::= { juniIsisSysEntry 21 }
juniIsisSysMaxAreaAddrMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a PDU is received with a different value for
MaximumAreaAddresses from that of the receiving system."
REFERENCE
"ISIS.aoi MaximumAreaAddressesMismatches (118)"
::= { juniIsisSysEntry 22 }
-- The following objects map those from the cLNSISISLevel2-P Package
juniIsisSysOrigL2LSPBuffSize OBJECT-TYPE
SYNTAX LSPBuffSize
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The maximum size of Level 2 LSPs and SNPs originated by this system.
This object follows the replaceOnlyWhileDisabled behaviour."
REFERENCE
"ISIS.aoi originatingL2LSPBufferSize (26)"
DEFVAL { 1497 }
::= { juniIsisSysEntry 23 }
juniIsisSysL2State OBJECT-TYPE
SYNTAX LevelState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Level 2 database."
REFERENCE
"ISIS.aoi l2State (28)"
::= { juniIsisSysEntry 24 }
juniIsisSysLSPL2DbaseOloads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the Level 2 LSP database has become overloaded."
REFERENCE
"ISIS.aoi lSPL2DatabaseOverloads (32)"
::= { juniIsisSysEntry 25 }
juniIsisSysAuthFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authentication failures recognized by this instance of
the protocol."
::= { juniIsisSysEntry 26 }
juniIsisSysLSPIgnoreErrors OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, allow the router to ignore IS-IS link state packets (LSPs)
that are received with internal checksum errors rather than purging the
LSPs."
DEFVAL { true }
::= { juniIsisSysEntry 27 }
juniIsisSysMaxAreaCheck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When on, enables checking of maximum area addresses per IS version of
ISO10589."
DEFVAL { true }
::= { juniIsisSysEntry 28 }
juniIsisSysSetOverloadBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Isis overload bit"
DEFVAL { false }
::= { juniIsisSysEntry 29 }
juniIsisSysSetOverloadBitStartupDuration OBJECT-TYPE
SYNTAX Integer32 (0|5..86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the length in time of seconds to set the overload bit from
startup. This object must be set together with
juniIsisSysSetOverloadBit, otherwise the agent will return zero.
Zero value for this object implies that the overload bit is not set.
Zero value does not have any meaning for this object."
DEFVAL { 0 }
::= { juniIsisSysEntry 30 }
juniIsisSysMaxLspLifetime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum time (in seconds) a LSP will remain in the box
without being refreshed before being considered invalid."
DEFVAL { 1200 }
::= { juniIsisSysEntry 31 }
juniIsisSysL1SpfInterval OBJECT-TYPE
SYNTAX Integer32 (0..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between level 1 SPF calculations."
DEFVAL { 5 }
::= { juniIsisSysEntry 32 }
juniIsisSysL2SpfInterval OBJECT-TYPE
SYNTAX Integer32 (0..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between level 2 SPF calculations."
DEFVAL { 5 }
::= { juniIsisSysEntry 33 }
juniIsisSysIshHoldTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a holdtime advertised in ESH/ISH PDUs."
DEFVAL { 30 }
::= { juniIsisSysEntry 34 }
juniIsisSysIshConfigTimer OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the rate of transmission for ESH and ISH packets."
DEFVAL { 10 }
::= { juniIsisSysEntry 35 }
juniIsisSysDistributeDomainWide OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When on, enables distribution of prefixes throughout a multi-level
domain."
DEFVAL { false }
::= { juniIsisSysEntry 36 }
juniIsisSysDistance OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The weight applied to IS-IS routes."
DEFVAL { 115 }
::= { juniIsisSysEntry 37 }
juniIsisSysL1MetricStyle OBJECT-TYPE
SYNTAX INTEGER {
juniIsisMetricStyleNarrow(2),
juniIsisMetricStyleNarrowTransition(3),
juniIsisMetricStyleTransition(4),
juniIsisMetricStyleWide(5),
juniIsisMetricStyleWideTransition(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of IP reachability TLV to advertise in level 1
LSPs."
DEFVAL { juniIsisMetricStyleNarrow }
::= { juniIsisSysEntry 38 }
juniIsisSysL2MetricStyle OBJECT-TYPE
SYNTAX INTEGER {
juniIsisMetricStyleNarrow(2),
juniIsisMetricStyleNarrowTransition(3),
juniIsisMetricStyleTransition(4),
juniIsisMetricStyleWide(5),
juniIsisMetricStyleWideTransition(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of IP reachability TLV to advertise in level 2
LSPs."
DEFVAL { juniIsisMetricStyleNarrow }
::= { juniIsisSysEntry 39 }
juniIsisSysIsoRouteTag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..19))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ISO routing area tag."
DEFVAL { "" }
::= { juniIsisSysEntry 40 }
juniIsisSysMplsTeLevel OBJECT-TYPE
SYNTAX INTEGER {
levelNone(0),
level1(1),
level2(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select flooding of MPLS traffic engineering link information into the
specified ISIS level."
::= { juniIsisSysEntry 41 }
juniIsisSysMplsTeRtrIdIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the stable router interface ID to designate it as TE capable.
A value of zero is used to remove any configured router interface ID."
::= { juniIsisSysEntry 42 }
juniIsisSysMplsTeSpfUseAnyBestPath OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure whether or not to consider spf paths when alternate
tunnel path exists"
::= { juniIsisSysEntry 43 }
juniIsisSysReferenceBandwidth OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the reference bandwitdth used to calculate the link cost in
bits per second.If the reference bandwidth is greater than the maximum
value reportable by this object then this object should report its
maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must
be used to report the reference bandwidth. "
::= { juniIsisSysEntry 44 }
juniIsisSysHighReferenceBandwidth OBJECT-TYPE
SYNTAX Gauge32(1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the reference bandwitdth in mega bits per second.
It is used to calculate the link cost."
::= { juniIsisSysEntry 45 }
--
-- The Level 1 Manual Area Address Table contains the set of area addresses
-- manually configured for each instance of the Integrated IS-IS protocol.
-- At least one row in which the value of juniIsisManAreaAddRowStatus is on
-- must be present for each instance of the protocol when juniIsisSysOperState
-- is also on for that instance. The maximum number of rows in this table for
-- each instance of the protocol for which the object
-- juniIsisManAreaAddrRowStatus has the value on is the value of
-- maximumAreaAddresses (as defined in ISO 10589) for that instance.
-- An Attempt to create a new row such that the number of rows with
-- juniIsisManAreaAddrRowStatus set to on for that protocol instance exceeds
-- maximumAreaAddresses is rejected.
--
juniIsisManAreaAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisManAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of manual area addresses configured on this Intermediate
System."
REFERENCE
"ISIS.aoi manualAreaAddresses (10)"
::= { juniIsisSystemGroup 2 }
juniIsisManAreaAddrEntry OBJECT-TYPE
SYNTAX JuniIsisManAreaAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one area address manually configured on this
system."
INDEX { juniIsisManAreaAddrSysInstance,
juniIsisManAreaAddr }
::= { juniIsisManAreaAddrTable 1 }
JuniIsisManAreaAddrEntry ::= SEQUENCE {
juniIsisManAreaAddrSysInstance Integer32,
juniIsisManAreaAddr OSINSAddress,
juniIsisManAreaAddrRowStatus RowStatus }
juniIsisManAreaAddrSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisManAreaAddrEntry 1 }
juniIsisManAreaAddr OBJECT-TYPE
SYNTAX OSINSAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A manually configured area address for this system. This object
follows the index behaviour.
Note: an index for the entry {1, {49.0001} active} in this table would
be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an
octet string is part of the OID."
::= { juniIsisManAreaAddrEntry 2 }
juniIsisManAreaAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the juniIsisManAreaAddrEntry. This object follows the
RowStatus behaviour. If an attempt is made to set this object to the
value off when the corresponding juniIsisManAreaAddrEntry is the only
valid entry for this instance and when the corresponding IS-IS instance
has juniIsisSysOperState set to on then the attempt is rejected."
DEFVAL { active }
::= { juniIsisManAreaAddrEntry 3 }
--
-- The System Integrated Group
--
-- The System Integrated Group is present if the system supports Integrated ISIS
-- at Level 1.
--
-- The System Protocol Supported Table
--
-- The System Protocol Supported Table contains the manually configured set of
-- protocols supported by each instance of the Integrated ISIS protocol.
--
juniIsisSysProtSuppTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysProtSuppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of protocols supported
by each instance of the Integrated ISIS protocol."
::= { juniIsisSystemGroup 3 }
juniIsisSysProtSuppEntry OBJECT-TYPE
SYNTAX JuniIsisSysProtSuppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one protocol supported by an instance of the
Integrated ISIS protocol."
INDEX { juniIsisSysProtSuppSysInstance,
juniIsisSysProtSuppProtocol }
::= { juniIsisSysProtSuppTable 1 }
JuniIsisSysProtSuppEntry ::= SEQUENCE {
juniIsisSysProtSuppSysInstance Integer32,
juniIsisSysProtSuppProtocol SupportedProtocol,
juniIsisSysProtSuppRowStatus RowStatus }
juniIsisSysProtSuppSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysProtSuppEntry 1 }
juniIsisSysProtSuppProtocol OBJECT-TYPE
SYNTAX SupportedProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One supported protocol. This object follows the index behaviour."
::= { juniIsisSysProtSuppEntry 2 }
juniIsisSysProtSuppRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the juniIsisSysProtSuppEntry. This object follows the
RowStatus behavior."
DEFVAL { active }
::= { juniIsisSysProtSuppEntry 3 }
--
-- The Summary Address Table
--
-- The Summary Address Table contains the set of summary addresses manually
-- configured for each instance of IP Integrated ISIS on the system.
--
juniIsisSummAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSummAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of IP summary addresses to use in forming the contents of Level
2 LSPs originated by this level 2 Intermediate System."
::= { juniIsisSystemGroup 4 }
juniIsisSummAddrEntry OBJECT-TYPE
SYNTAX JuniIsisSummAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IP summary address."
INDEX { juniIsisSummAddrSysInstance,
juniIsisSummAddress,
juniIsisSummAddrMask }
::= { juniIsisSummAddrTable 1 }
JuniIsisSummAddrEntry ::= SEQUENCE {
juniIsisSummAddrSysInstance Integer32,
juniIsisSummAddress IpAddress,
juniIsisSummAddrMask IpAddress,
juniIsisSummAddrRowStatus RowStatus,
juniIsisSummAddrOperState OperState,
juniIsisSummAddrDefaultMetric Integer32,
juniIsisSummAddrDelayMetric OtherMetric,
juniIsisSummAddrExpenseMetric OtherMetric,
juniIsisSummAddrErrorMetric OtherMetric,
juniIsisSummLevel INTEGER }
juniIsisSummAddrSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviours."
::= { juniIsisSummAddrEntry 1 }
juniIsisSummAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address value for this summary address. This object follows the
index behaviour."
::= { juniIsisSummAddrEntry 2 }
juniIsisSummAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask value for this summary address. This object follows the index
behaviour."
::= { juniIsisSummAddrEntry 3 }
juniIsisSummAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The existence state of this summary address. This object follows the
RowStatus behaviour."
::= { juniIsisSummAddrEntry 4 }
juniIsisSummAddrOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The operational state of this entry. This object follows the
operationalState behaviour. When the operational state changes if this
would cause the contents of LSPs originated by the system to change then
those new LSPs must be generated and sent as soon as is permitted by the
ISIS protocol."
::= { juniIsisSummAddrEntry 5 }
juniIsisSummAddrDefaultMetric OBJECT-TYPE
SYNTAX Integer32 (0..16777214)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default metric value to announce this summary address with in Level
1 or 2 LSPs generated by this system. A Metric value of 0 indicates to
use the lowest metric value amongst the routes being summarized. When
advertising a metric value into a narrow domain
(juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to
juniIsisMetricStyleNarrow) the value will be truncated to 63."
::= { juniIsisSummAddrEntry 6 }
juniIsisSummAddrDelayMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The delay metric value to announce this summary address with in Level 2
LSPs generated by this system. The value of zero is reserved to
indicate that this metric is not supported."
::= { juniIsisSummAddrEntry 7 }
juniIsisSummAddrExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expense metric value to announce this summary address with in Level
2 LSPs generated by this system. The value of zero is reserved to
indicate that this metric is not supported."
::= { juniIsisSummAddrEntry 8 }
juniIsisSummAddrErrorMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error metric value to announce this summary address with in Level n
LSPs generated by this system. The value of zero is reserved to
indicate that this metric is not supported."
::= { juniIsisSummAddrEntry 9 }
juniIsisSummLevel OBJECT-TYPE
SYNTAX INTEGER {
level1IS(1),
level2IS(2),
level1l2IS(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The level of database at which to annouce this summary."
::= { juniIsisSummAddrEntry 10 }
--
-- The Circuit Group
--
-- The Circuit Group is current
--
-- The Circuit Table
-- Each broadcast or point-to-point interface on the system corresponds to one
-- entry in the Circuit table.
--
juniIsisCircTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisCircEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of circuits used by each instance of Integrated IS-IS on this
system."
::= { juniIsisCircuitGroup 1 }
juniIsisCircEntry OBJECT-TYPE
SYNTAX JuniIsisCircEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An juniIsisCircEntry exists for each circuit used by Integrated IS-IS
on this system."
INDEX { juniIsisCircSysInstance,
juniIsisCircIfIndex }
::= { juniIsisCircTable 1 }
JuniIsisCircEntry ::= SEQUENCE {
juniIsisCircSysInstance Integer32,
juniIsisCircIfIndex Integer32,
juniIsisCircLocalID Integer32,
juniIsisCircOperState OperState,
juniIsisCircRowStatus RowStatus,
juniIsisCircType INTEGER,
juniIsisCircL1DefaultMetric JuniDefaultMetric,
juniIsisCircL1DelayMetric OtherMetric,
juniIsisCircL1ExpenseMetric OtherMetric,
juniIsisCircL1ErrorMetric OtherMetric,
juniIsisCircExtDomain TruthValue,
juniIsisCircAdjChanges Counter32,
juniIsisCircInitFails Counter32,
juniIsisCircRejAdjs Counter32,
juniIsisCircOutCtrlPDUs Counter32,
juniIsisCircInCtrlPDUs Counter32,
juniIsisCircIDFieldLenMismatches Counter32,
juniIsisCircL2DefaultMetric JuniDefaultMetric,
juniIsisCircL2DelayMetric OtherMetric,
juniIsisCircL2ExpenseMetric OtherMetric,
juniIsisCircL2ErrorMetric OtherMetric,
juniIsisCircManL2Only TruthValue,
juniIsisCircL1ISPriority ISPriority,
juniIsisCircL1CircID CircuitID,
juniIsisCircL1DesIS SystemID,
juniIsisCircLANL1DesISChanges Counter32,
juniIsisCircL2ISPriority ISPriority,
juniIsisCircL2CircID CircuitID,
juniIsisCircL2DesIS SystemID,
juniIsisCircLANL2DesISChanges Counter32,
juniIsisCircMCAddr INTEGER,
juniIsisCircPtToPtCircID CircuitID,
juniIsisCircL1HelloTimer Integer32,
juniIsisCircL2HelloTimer Integer32,
juniIsisCircL1HelloMultiplier Integer32,
juniIsisCircL2HelloMultiplier Integer32,
juniIsisCircMinLSPTransInt Unsigned32,
juniIsisCircMinLSPReTransInt Integer32,
juniIsisCircL1CSNPInterval Integer32,
juniIsisCircL2CSNPInterval Integer32,
juniIsisCircLSPThrottle Integer32,
juniIsisCircMeshGroupEnabled INTEGER,
juniIsisCircMeshGroup Unsigned32,
juniIsisCircLevel INTEGER,
juniIsisCircState INTEGER }
juniIsisCircSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisCircEntry 1 }
juniIsisCircIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface to which this circuit
corresponds."
::= { juniIsisCircEntry 2 }
juniIsisCircLocalID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identification that can be used in protocol packets to identify a
circuit. Implementations may devise ways to assure that this value is
suitable for the circuit it is used on. LAN packets only have space for
8 bits.
Values of juniIsisCircLocalID do not need to be unique. They are only
required to differ on LANs where the Intermediate System is the
Designated Intermediate System."
::= { juniIsisCircEntry 3 }
juniIsisCircOperState OBJECT-TYPE
SYNTAX OperState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operational state of the circuit. This object follows the
operationalState behaviour."
DEFVAL { off }
::= { juniIsisCircEntry 4 }
juniIsisCircRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The existence state of this circuit. This object follows the RowStatus
behaviour."
DEFVAL { active }
::= { juniIsisCircEntry 5 }
juniIsisCircType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
ptToPt(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the circuit. This object follows the
replaceOnlyWhileDisabled behaviour. The type specified must be
compatible with the type of the interface defined by the value of
juniIsisCircIfIndex."
REFERENCE
"ISIS.aoi type (33)"
::= { juniIsisCircEntry 6 }
juniIsisCircL1DefaultMetric OBJECT-TYPE
SYNTAX JuniDefaultMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric value of this circuit for Level 1 traffic."
REFERENCE
"ISIS.aoi l1DefaultMetric (35)"
DEFVAL { 10 }
::= { juniIsisCircEntry 7 }
juniIsisCircL1DelayMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The delay metric value of this circuit for Level 1 traffic. The value
of zero is reserved to indicate that this metric is not supported."
REFERENCE
"ISIS.aoi l1DelayMetric (36)"
DEFVAL { 0 }
::= { juniIsisCircEntry 8 }
juniIsisCircL1ExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expense metric value of this circuit for Level 1 traffic. The
value of zero is reserved to indicate that this metric is not
supported."
REFERENCE
"ISIS.aoi l1ExpenseMetric (37)"
DEFVAL { 0 }
::= { juniIsisCircEntry 9 }
juniIsisCircL1ErrorMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error metric value of this circuit for Level 1 traffic. The value
of zero is reserved to indicate that this metric is not supported."
REFERENCE
"ISIS.aoi l1ErrorMetric (38)"
DEFVAL { 0 }
::= { juniIsisCircEntry 10 }
juniIsisCircExtDomain OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, suppress normal transmission of and interpretation of
Intra-domain ISIS PDUs on this circuit."
REFERENCE
"ISIS.aoi externalDomain (46)"
DEFVAL { false }
::= { juniIsisCircEntry 11 }
juniIsisCircAdjChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an adjacency state change has occurred on this
circuit."
REFERENCE
"ISIS.aoi changesInAdjacencyState (40)"
::= { juniIsisCircEntry 12 }
juniIsisCircInitFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times initialization of this circuit has failed."
REFERENCE
"ISIS.aoi initializationFailures (41)"
::= { juniIsisCircEntry 13 }
juniIsisCircRejAdjs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an adjacency has been rejected on this circuit."
REFERENCE
"ISIS.aoi rejectedAdjacencies (42)"
::= { juniIsisCircEntry 14 }
juniIsisCircOutCtrlPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IS-IS control PDUs sent on this circuit."
REFERENCE
"ISIS.aoi iSISControlPDUsSent (43)"
::= { juniIsisCircEntry 15 }
juniIsisCircInCtrlPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IS-IS control PDUs received on this circuit."
REFERENCE
"ISIS.aoi controlPDUsReceived (44)"
::= { juniIsisCircEntry 16 }
juniIsisCircIDFieldLenMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an IS-IS control PDU with an ID field length
different to that for this system has been received."
REFERENCE
"ISIS.aoi iDFieldLengthMismatches (25)"
::= { juniIsisCircEntry 17 }
--
-- The following objects map those from the linkageISISLevel2-P package
--
juniIsisCircL2DefaultMetric OBJECT-TYPE
SYNTAX JuniDefaultMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default metric value of this circuit for level 2 traffic."
REFERENCE
"ISIS.aoi l2DefaultMetric (68)"
DEFVAL { 10 }
::= { juniIsisCircEntry 18 }
juniIsisCircL2DelayMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The delay metric value of this circuit for level 2 traffic. The value
of zero is reserved to indicate that this metric is not supported."
REFERENCE
"ISIS.aoi l2DelayMetric (69)"
DEFVAL { 0 }
::= { juniIsisCircEntry 19 }
juniIsisCircL2ExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expense metric value of this circuit for level 2 traffic. The
value of zero is reserved to indicate that this metric is not
supported."
REFERENCE
"ISIS.aoi l2ExpenseMetric (70)"
DEFVAL { 0 }
::= { juniIsisCircEntry 20 }
juniIsisCircL2ErrorMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error metric value of this circuit for level 2 traffic. The value
of zero is reserved to indicate that this metric is not supported."
REFERENCE
"ISIS.aoi l2ErrorMetric (71)"
DEFVAL { 0 }
::= { juniIsisCircEntry 21 }
juniIsisCircManL2Only OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When true, indicates that this circuit is to be used only for level 2.
This object follows the replaceOnlyWhileDisabled behaviour."
REFERENCE
"ISIS.aoi manualL2OnlyMode (72)"
DEFVAL { false }
::= { juniIsisCircEntry 22 }
--
-- The following objects map those from the linkageISISBroadcast-P package
--
juniIsisCircL1ISPriority OBJECT-TYPE
SYNTAX ISPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for becoming LAN Level 1 Deignated Intermediate System on
a broadcast circuit."
REFERENCE
"ISIS.aoi l1IntermediateSystemPriority (47)"
DEFVAL { 64 }
::= { juniIsisCircEntry 23 }
juniIsisCircL1CircID OBJECT-TYPE
SYNTAX CircuitID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN ID allocated by the LAN Level 1 Designated Intermediate System.
Where this system is not aware of the value (because it is not
participating in the Level 1 Designated Intermediate System election),
this object has the value which would be proposed for this circuit (i.e.
the concatenation of the local system ID and the one octet local Circuit
ID for this circuit."
REFERENCE
"ISIS.aoi l1CircuitID (48)"
::= { juniIsisCircEntry 24 }
juniIsisCircL1DesIS OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the LAN Level 1 Designated Intermediate System on this
circuit. If, for any reason this system is not partaking in the
relevant Designated Intermediate System election process, then the value
returned is the zero length OCTET STRING."
REFERENCE
"ISIS.aoi l1DesignatedIntermediateSystem (49)"
::= { juniIsisCircEntry 25 }
juniIsisCircLANL1DesISChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the LAN Level 1 Designated Intermediate System has
changed."
REFERENCE
"ISIS.aoi lanL1DesignatedIntermediateSystemChanges (50)"
::= { juniIsisCircEntry 26 }
-- The following objects map those from the linkageISISLevel2Broadcast-P package
juniIsisCircL2ISPriority OBJECT-TYPE
SYNTAX ISPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for becoming LAN level 2 Designated Intermediate System."
REFERENCE
"ISIS.aoi l2IntermediateSystemPriority (73)"
DEFVAL { 64 }
::= { juniIsisCircEntry 27 }
juniIsisCircL2CircID OBJECT-TYPE
SYNTAX CircuitID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LAN ID allocated by the LAN Level 2 Designated Intermediate System.
Where this system is not aware of this value (because it is not
participating in the Level 2 Designated Intermediate System election),
this object has the value which would be proposed for this circuit
(i.e. the concatenation of the local system ID and the one octet local
Circuit ID for this circuit."
REFERENCE
"ISIS.aoi l2CircuitID (74)"
::= { juniIsisCircEntry 28 }
juniIsisCircL2DesIS OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the LAN Level 2 Designated Intermediate System on this
circuit. If, for any reason, this system is not partaking in the
relevant Designated Intermediate System election process, then the value
returned is the zero length OCTET STRING."
REFERENCE
"ISIS.aoi l2DesignatedIntermediateSystem (75)"
::= { juniIsisCircEntry 29 }
juniIsisCircLANL2DesISChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the LAN Level 2 Designated Intermediate System has
changed."
REFERENCE
"ISIS.aoi lanL2DesignatedIntermediateSystemChanges (76)"
::= { juniIsisCircEntry 30 }
juniIsisCircMCAddr OBJECT-TYPE
SYNTAX INTEGER {
group(1),
functional(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies which type of multicast address will be used for sending
HELLO PDUs on this circuit."
DEFVAL { group }
::= { juniIsisCircEntry 31 }
juniIsisCircPtToPtCircID OBJECT-TYPE
SYNTAX CircuitID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the circuit allocated during initialization. If no value has
been negotiated (either because the adjacency is to an End System, or
because initialization has not yet successfully completed), this object
has the value which would be proposed for this circuit (i.e. the
concatenation of the local system ID and the one octet local Circuit ID
for this circuit."
REFERENCE
"ISIS.aoi ptPtCircuitID (51)"
::= { juniIsisCircEntry 32 }
juniIsisCircL1HelloTimer OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
networks. It is also used as the period between Hellos on point to
point circuits. This object follows the resettingTimer behaviour."
REFERENCE
"ISIS.aoi iSISHelloTimer (45)"
DEFVAL { 10 }
::= { juniIsisCircEntry 33 }
juniIsisCircL2HelloTimer OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
networks. This object follows the resettingTimer behaviour."
REFERENCE
"ISIS.aoi iSISHelloTimer (45)"
DEFVAL { 10 }
::= { juniIsisCircEntry 34 }
juniIsisCircL1HelloMultiplier OBJECT-TYPE
SYNTAX Integer32 (3..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is multiplied by the corresponding HelloTimer and the result
in seconds (rounded up) is used as the holding time in transmitted
hellos, to be used by receivers of hello packets from this IS."
REFERENCE
"ISIS.aoi iSISHelloTimer (45)"
DEFVAL { 3 }
::= { juniIsisCircEntry 35 }
juniIsisCircL2HelloMultiplier OBJECT-TYPE
SYNTAX Integer32 (3..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is multiplied by the corresponding HelloTimer and the result
in seconds (rounded up) is used as the holding time in transmitted
hellos, to be used by receivers of hello packets from this IS"
REFERENCE
"ISIS.aoi iSISHelloTimer (45)"
DEFVAL { 3 }
::= { juniIsisCircEntry 36 }
juniIsisCircMinLSPTransInt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in milliseconds, between transmission of LSPs on a
circuit. This object follows the resettingTimer behaviour. This timer
shall be capable of a resolution not coarser than 10 milliseconds."
REFERENCE
"ISIS.aoi minimumBroadcastLSPTransmissionInterval (7)"
DEFVAL { 33 }
::= { juniIsisCircEntry 37 }
juniIsisCircMinLSPReTransInt OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum interval, in seconds, between re-transmission of an Level 1 or
2 LSP. This object follows the resettingTimer behaviour."
REFERENCE
"ISIS.aoi minimumLSPTransmissionInterval (5)"
DEFVAL { 5 }
::= { juniIsisCircEntry 38 }
juniIsisCircL1CSNPInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of time, in seconds, between transmission of Level 1 CSNPs on
multiaccess networks if this router is the designated router. On
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
interval will be 0 for point-to-point networks."
DEFVAL { 10 }
::= { juniIsisCircEntry 39 }
juniIsisCircL2CSNPInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of time, in seconds, between transmission of Level 2 CSNPs on
multiaccess networks if this router is the designated router. On
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
interval will be 0 for point-to-point networks."
DEFVAL { 10 }
::= { juniIsisCircEntry 40 }
juniIsisCircLSPThrottle OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimal interval of time, in milliseconds, between retransmissions of
LSPs on a point to point interface."
DEFVAL { 33 }
::= { juniIsisCircEntry 41 }
juniIsisCircMeshGroupEnabled OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
blocked(2),
set(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this port a member of a mesh group, or blocked? Circuits in the
same mesh group act as a virtual multiaccess network. LSPs seen on one
circuit in a mesh group will not be flooded to another circuit in the
same mesh group."
DEFVAL { inactive }
::= { juniIsisCircEntry 42 }
juniIsisCircMeshGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Circuits in the same mesh group act as a virtual multiaccess network.
LSPs seen on one circuit in a mesh group will not be flooded to another
circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is
false, this value is ignored. Default value returned as 0 has no significance
for this variable."
::= { juniIsisCircEntry 43 }
juniIsisCircLevel OBJECT-TYPE
SYNTAX INTEGER {
level1IS(0),
level1l2IS(1),
level2Only(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of this circuit. This object follows the
replaceOnlyWhileDisabled behavior."
REFERENCE
"ISIS.aoi iSType(2)"
::= { juniIsisCircEntry 44 }
juniIsisCircState OBJECT-TYPE
SYNTAX INTEGER {
isisCircuitDown(1),
isisCircuitUp(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the circuit."
::= { juniIsisCircEntry 45 }
juniIsisCircBFDTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisCircBFDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Juniper ISIS circuit table describes the BFD-specific
characteristics of interfaces."
::= { juniIsisCircuitGroup 4 }
juniIsisCircBFDEntry OBJECT-TYPE
SYNTAX JuniIsisCircBFDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Juniper ISIS circuit table describes the BFD-specific
characteristics of one interface."
AUGMENTS { juniIsisCircEntry }
::= { juniIsisCircBFDTable 1 }
JuniIsisCircBFDEntry ::= SEQUENCE {
juniIsisCircBfdEnable TruthValue,
juniIsisCircBfdMinRxInterval Integer32,
juniIsisCircBfdMinTxInterval Integer32,
juniIsisCircBfdMultiplier Integer32
}
juniIsisCircBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates whether BFD session on the interface is active or not"
DEFVAL { false }
::= { juniIsisCircBFDEntry 1 }
juniIsisCircBfdMinRxInterval OBJECT-TYPE
SYNTAX Integer32 (100..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable specifies upper-limit on rate local-system requires remote-system to
transmit bfd control-packets [milliseconds]"
DEFVAL { 300 }
::= { juniIsisCircBFDEntry 2 }
juniIsisCircBfdMinTxInterval OBJECT-TYPE
SYNTAX Integer32 (100..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable specifies lower-limit on rate local-system requires remote-system to
transmit bfd control-packets [milliseconds]"
DEFVAL { 300 }
::= { juniIsisCircBFDEntry 3 }
juniIsisCircBfdMultiplier OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable specifies detection-multiplier "
DEFVAL { 3 }
::= { juniIsisCircBFDEntry 4 }
--
-- The System Host Name Table
--
-- The System Host Name Table contains a manually configured set of host to
-- system ID aliases supported by each instance of the Integrated ISIS protocol.
--
juniIsisSysHostNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysHostNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of host name to system
ID aliases supported by each instance of the Integrated ISIS protocol."
::= { juniIsisSystemGroup 5 }
juniIsisSysHostNameEntry OBJECT-TYPE
SYNTAX JuniIsisSysHostNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one name to system ID alias supported by an
instance of the Integrated ISIS protocol."
INDEX { juniIsisSysHostNameSysInstance,
juniIsisSysHostNameSysId }
::= { juniIsisSysHostNameTable 1 }
JuniIsisSysHostNameEntry ::= SEQUENCE {
juniIsisSysHostNameSysInstance Integer32,
juniIsisSysHostNameSysId SystemID,
juniIsisSysHostNameAreaAddr OSINSAddress,
juniIsisSysHostNameName OCTET STRING,
juniIsisSysHostNameType INTEGER,
juniIsisSysHostNameRowStatus RowStatus }
juniIsisSysHostNameSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysHostNameEntry 1 }
juniIsisSysHostNameSysId OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID for the system which this name will be assigned."
::= { juniIsisSysHostNameEntry 2 }
juniIsisSysHostNameAreaAddr OBJECT-TYPE
SYNTAX OSINSAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A configured area address for the system which this name will be
assigned. This object follows the index behaviour.
Note: an index for the entry {1, {49.0001} active} in this table would
be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an
Octet string is part of the OID."
::= { juniIsisSysHostNameEntry 3 }
juniIsisSysHostNameName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string to use when displaying system data with this system ID."
::= { juniIsisSysHostNameEntry 4 }
juniIsisSysHostNameType OBJECT-TYPE
SYNTAX INTEGER {
hostNameTypeStatic(1),
hostNameTypeDynamic(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of host name entry."
::= { juniIsisSysHostNameEntry 5 }
juniIsisSysHostNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this host name entry. This object follows the RowStatus
behaviour."
::= { juniIsisSysHostNameEntry 6 }
--
-- The Area Authentication Table
--
-- The Area Authentication Table contains the manually configured set of
-- authentication keys used to authenticate Level 1 LSPs and SNPs in each
-- instance of the Integrated ISIS protocol.
--
juniIsisSysAreaAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysAreaAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of area authentication
keys supported by each instance of the Integrated ISIS protocol."
::= { juniIsisSystemGroup 6 }
juniIsisSysAreaAuthenticationEntry OBJECT-TYPE
SYNTAX JuniIsisSysAreaAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one area authentication key supported by an
instance of the Integrated ISIS protocol."
INDEX { juniIsisSysAreaAuthenticationSysInstance,
juniIsisSysAreaAuthenticationKeyId }
::= { juniIsisSysAreaAuthenticationTable 1 }
JuniIsisSysAreaAuthenticationEntry ::= SEQUENCE {
juniIsisSysAreaAuthenticationSysInstance Integer32,
juniIsisSysAreaAuthenticationKeyId Integer32,
juniIsisSysAreaAuthenticationPwd OCTET STRING,
juniIsisSysAreaAuthenticationKeyType INTEGER,
juniIsisSysAreaAuthenticationStartAcceptTime AuthTime,
juniIsisSysAreaAuthenticationStartGenerateTime AuthTime,
juniIsisSysAreaAuthenticationStopAcceptTime AuthTime,
juniIsisSysAreaAuthenticationStopGenerateTime AuthTime,
juniIsisSysAreaAuthenticationRowStatus RowStatus }
juniIsisSysAreaAuthenticationSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysAreaAuthenticationEntry 1 }
juniIsisSysAreaAuthenticationKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour."
::= { juniIsisSysAreaAuthenticationEntry 2 }
juniIsisSysAreaAuthenticationPwd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in Level 1 Link State
Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a
value of plaintext or hmacMd5. A modification of
juniIsisSysAreaAuthenticationKeyType does not modify the
juniIsisSysAreaAuthenticationPwd value.
Reading this object always results in an OCTET STRING of length zero;
authentication may not be bypassed by reading the MIB object."
DEFVAL { "" }
::= { juniIsisSysAreaAuthenticationEntry 3 }
juniIsisSysAreaAuthenticationKeyType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
plaintext(1),
hmacMd5(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect Level 1 Link
State packets and sequence number packets"
DEFVAL { hmacMd5 }
::= { juniIsisSysAreaAuthenticationEntry 4 }
juniIsisSysAreaAuthenticationStartAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
validate level 1 LSPs and SNPs received. The Default value the start
accept time will be the current time when the key was created"
::= { juniIsisSysAreaAuthenticationEntry 5 }
juniIsisSysAreaAuthenticationStartGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
authenticate level 1 LSPs and SNPs transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minutes"
::= { juniIsisSysAreaAuthenticationEntry 6 }
juniIsisSysAreaAuthenticationStopAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being accepted
as a valid level 1 LSP and SNP key received. A value of zero indicates
the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysAreaAuthenticationEntry 7 }
juniIsisSysAreaAuthenticationStopGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being used to
authenticate level 1 LSPs and SNPs transmitted. A value of zero
indicates the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysAreaAuthenticationEntry 8 }
juniIsisSysAreaAuthenticationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The existence state of this authentication key. This object follows
the RowStatus behaviour."
::= { juniIsisSysAreaAuthenticationEntry 9 }
-- The Domain Authentication Table
-- The Domain Authentication Table contains the manually configured set of
-- authentication keys used to authenticate Level 2 LSPs and SNPs in each
-- instance of the Integrated ISIS protocol.
--
juniIsisSysDomainAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysDomainAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of domain
authentication keys supported by each instance of the Integrated ISIS
protocol."
::= { juniIsisSystemGroup 7 }
juniIsisSysDomainAuthenticationEntry OBJECT-TYPE
SYNTAX JuniIsisSysDomainAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one domain authentication key supported by an
instance of the Integrated ISIS protocol."
INDEX { juniIsisSysDomainAuthenticationSysInstance,
juniIsisSysDomainAuthenticationKeyId }
::= { juniIsisSysDomainAuthenticationTable 1 }
JuniIsisSysDomainAuthenticationEntry ::= SEQUENCE {
juniIsisSysDomainAuthenticationSysInstance Integer32,
juniIsisSysDomainAuthenticationKeyId Integer32,
juniIsisSysDomainAuthenticationPwd OCTET STRING,
juniIsisSysDomainAuthenticationKeyType INTEGER,
juniIsisSysDomainAuthenticationStartAcceptTime AuthTime,
juniIsisSysDomainAuthenticationStartGenerateTime AuthTime,
juniIsisSysDomainAuthenticationStopAcceptTime AuthTime,
juniIsisSysDomainAuthenticationStopGenerateTime AuthTime,
juniIsisSysDomainAuthenticationRowStatus RowStatus }
juniIsisSysDomainAuthenticationSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysDomainAuthenticationEntry 1 }
juniIsisSysDomainAuthenticationKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour."
::= { juniIsisSysDomainAuthenticationEntry 2 }
juniIsisSysDomainAuthenticationPwd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in Level 2 Link State
Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has
a value of plaintext or hmacMd5. A modification of
juniIsisSysDomainAuthenticationKeyType does not modify the
juniIsisSysDomainAuthenticationPwd value.
Reading this object always results in an OCTET STRING of length zero;
authentication may not be bypassed by reading the MIB object."
DEFVAL { "" }
::= { juniIsisSysDomainAuthenticationEntry 3 }
juniIsisSysDomainAuthenticationKeyType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
plaintext(1),
hmacMd5(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect Level 2 Link
State packets and Sequence Number packets"
DEFVAL { hmacMd5 }
::= { juniIsisSysDomainAuthenticationEntry 4 }
juniIsisSysDomainAuthenticationStartAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
validate level 2 LSPs and SNPs received. The Default value the start
accept time will be the current time when the key was created"
::= { juniIsisSysDomainAuthenticationEntry 5 }
juniIsisSysDomainAuthenticationStartGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
authenticate level 2 LSPs and SNPs transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minutes"
::= { juniIsisSysDomainAuthenticationEntry 6 }
juniIsisSysDomainAuthenticationStopAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being accepted
as a valid level 2 LSP and SNP key received. A value of zero indicates
the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysDomainAuthenticationEntry 7 }
juniIsisSysDomainAuthenticationStopGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being used to
authenticate level 2 LSPs and SNPs transmitted. A value of zero
indicates the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysDomainAuthenticationEntry 8 }
juniIsisSysDomainAuthenticationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The existence state of this authentication key. This object follows
the RowStatus behaviour."
::= { juniIsisSysDomainAuthenticationEntry 9 }
--
-- The Level 1 Circuit Authentication Table
--
-- The Level 1 Circuit Authentication Table contains the manually configured
-- set of authentication keys used to authenticate Level 1 hello packets in each
-- instance of the Integrated ISIS protocol.
--
juniIsisSysL1CircAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysL1CircAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of Level 1 Circuit
authentication keys supported by each instance of the Integrated ISIS
protocol."
::= { juniIsisCircuitGroup 2 }
juniIsisSysL1CircAuthenticationEntry OBJECT-TYPE
SYNTAX JuniIsisSysL1CircAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one Level 1 circuit authentication key supported by
an instance of the Integrated ISIS protocol."
INDEX { juniIsisSysL1CircAuthenticationSysInstance,
juniIsisSysL1CircAuthenticationIfIndex,
juniIsisSysL1CircAuthenticationKeyId }
::= { juniIsisSysL1CircAuthenticationTable 1 }
JuniIsisSysL1CircAuthenticationEntry ::= SEQUENCE {
juniIsisSysL1CircAuthenticationSysInstance Integer32,
juniIsisSysL1CircAuthenticationIfIndex Integer32,
juniIsisSysL1CircAuthenticationKeyId Integer32,
juniIsisSysL1CircAuthenticationPwd OCTET STRING,
juniIsisSysL1CircAuthenticationKeyType INTEGER,
juniIsisSysL1CircAuthenticationStartAcceptTime AuthTime,
juniIsisSysL1CircAuthenticationStartGenerateTime AuthTime,
juniIsisSysL1CircAuthenticationStopAcceptTime AuthTime,
juniIsisSysL1CircAuthenticationStopGenerateTime AuthTime,
juniIsisSysL1CircAuthenticationRowStatus RowStatus }
juniIsisSysL1CircAuthenticationSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysL1CircAuthenticationEntry 1 }
juniIsisSysL1CircAuthenticationIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface to which this circuit
corresponds."
::= { juniIsisSysL1CircAuthenticationEntry 2 }
juniIsisSysL1CircAuthenticationKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour."
::= { juniIsisSysL1CircAuthenticationEntry 3 }
juniIsisSysL1CircAuthenticationPwd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in Level 1 Hello Packets
whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value
of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType
does not modify the juniIsisSysL1CircAuthenticationPwd value.
Reading this object always results in an OCTET STRING of length zero;
authentication may not be bypassed by reading the MIB object."
DEFVAL { "" }
::= { juniIsisSysL1CircAuthenticationEntry 4 }
juniIsisSysL1CircAuthenticationKeyType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
plaintext(1),
hmacMd5(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect Level 1 hello
packets."
DEFVAL { hmacMd5 }
::= { juniIsisSysL1CircAuthenticationEntry 5 }
juniIsisSysL1CircAuthenticationStartAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
validate level 1 IIH packets received. The Default value the start
accept time will be the current time when the key was created."
::= { juniIsisSysL1CircAuthenticationEntry 6 }
juniIsisSysL1CircAuthenticationStartGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
authenticate level 1 IIH packets transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minutes."
::= { juniIsisSysL1CircAuthenticationEntry 7 }
juniIsisSysL1CircAuthenticationStopAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being accepted
as a valid level 1 IIH packets key received. A value of zero indicates
the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysL1CircAuthenticationEntry 8 }
juniIsisSysL1CircAuthenticationStopGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being used to
authenticate level 1 IIH packets transmitted. A value of zero indicates
the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysL1CircAuthenticationEntry 9 }
juniIsisSysL1CircAuthenticationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The existence state of this authentication key. This object follows
the RowStatus behaviour."
::= { juniIsisSysL1CircAuthenticationEntry 10 }
--
-- The Level 2 Circuit Authentication Table
--
-- The Level 2 Circuit Authentication Table contains the manually configured set
-- of authentication keys used to authenticate Level 2 hello packets in each
-- instance of the Integrated ISIS protocol.
--
juniIsisSysL2CircAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisSysL2CircAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the manually configured set of Level 2 Circuit
authentication keys supported by each instance of the Integrated ISIS
protocol."
::= { juniIsisCircuitGroup 3 }
juniIsisSysL2CircAuthenticationEntry OBJECT-TYPE
SYNTAX JuniIsisSysL2CircAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one Level 2 circuit authentication key supported by
an instance of the Integrated ISIS protocol."
INDEX { juniIsisSysL2CircAuthenticationSysInstance,
juniIsisSysL2CircAuthenticationIfIndex,
juniIsisSysL2CircAuthenticationKeyId }
::= { juniIsisSysL2CircAuthenticationTable 1 }
JuniIsisSysL2CircAuthenticationEntry ::= SEQUENCE {
juniIsisSysL2CircAuthenticationSysInstance Integer32,
juniIsisSysL2CircAuthenticationIfIndex Integer32,
juniIsisSysL2CircAuthenticationKeyId Integer32,
juniIsisSysL2CircAuthenticationPwd OCTET STRING,
juniIsisSysL2CircAuthenticationKeyType INTEGER,
juniIsisSysL2CircAuthenticationStartAcceptTime AuthTime,
juniIsisSysL2CircAuthenticationStartGenerateTime AuthTime,
juniIsisSysL2CircAuthenticationStopAcceptTime AuthTime,
juniIsisSysL2CircAuthenticationStopGenerateTime AuthTime,
juniIsisSysL2CircAuthenticationRowStatus RowStatus }
juniIsisSysL2CircAuthenticationSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisSysL2CircAuthenticationEntry 1 }
juniIsisSysL2CircAuthenticationIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex for the interface to which this circuit
corresponds."
::= { juniIsisSysL2CircAuthenticationEntry 2 }
juniIsisSysL2CircAuthenticationKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the instance to which this row corresponds.
This object follows the index behaviour."
::= { juniIsisSysL2CircAuthenticationEntry 3 }
juniIsisSysL2CircAuthenticationPwd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to be used as the Authentication Key in Level 2 Hello Packets
whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value
of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType
does not modify the juniIsisSysL2CircAuthenticationPwd value.
Reading this object always results in an OCTET STRING of length zero;
authentication may not be bypassed by reading the MIB object."
DEFVAL { "" }
::= { juniIsisSysL2CircAuthenticationEntry 4 }
juniIsisSysL2CircAuthenticationKeyType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
plaintext(1),
hmacMd5(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"What authentication scheme, if any, is used to protect Level 2 hello
packets."
DEFVAL { hmacMd5 }
::= { juniIsisSysL2CircAuthenticationEntry 5 }
juniIsisSysL2CircAuthenticationStartAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
validate level 2 IIH packets received. The Default value the start
accept time will be the current time when the key was created."
::= { juniIsisSysL2CircAuthenticationEntry 6 }
juniIsisSysL2CircAuthenticationStartGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will start to be used to
authenticate level 2 IIH packets transmitted. The Default value the
start accept time will be the current time when the key was created + 2
minutes."
::= { juniIsisSysL2CircAuthenticationEntry 7 }
juniIsisSysL2CircAuthenticationStopAcceptTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being accepted
as a valid level 2 IIH packets key received. A value of zero indicates
the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysL2CircAuthenticationEntry 8 }
juniIsisSysL2CircAuthenticationStopGenerateTime OBJECT-TYPE
SYNTAX AuthTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date and time when this authentication key will stop being used to
authenticate level 2 IIH packets transmitted. A value of zero indicates
the key will never stop being used to authenticate packets."
DEFVAL { 0 }
::= { juniIsisSysL2CircAuthenticationEntry 9 }
juniIsisSysL2CircAuthenticationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The existence state of this authentication key. This object follows
the RowStatus behaviour."
DEFVAL { active }
::= { juniIsisSysL2CircAuthenticationEntry 10 }
--
-- The MPLS TE tunnel table contains the set of tunnels exported by MPLS into
-- ISIS.
juniIsisMplsTeTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF JuniIsisMplsTeTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of tunnels imported from MPLS."
REFERENCE
"ISIS.aoi mplsTeTunnels(6)"
::= { juniIsisSystemGroup 8 }
juniIsisMplsTeTunnelEntry OBJECT-TYPE
SYNTAX JuniIsisMplsTeTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains metric details of an MPLS LSP"
INDEX { juniIsisMplsTeTunnelSysInstance,
juniIsisMplsNextHopIndex }
::= { juniIsisMplsTeTunnelTable 1 }
JuniIsisMplsTeTunnelEntry ::= SEQUENCE {
juniIsisMplsTeTunnelSysInstance Integer32,
juniIsisMplsNextHopIndex Integer32,
juniIsisMplsTeSystemId SystemID,
juniIsisMplsTeRouterId IpAddress,
juniIsisMplsTeTunnelMetric Integer32,
juniIsisMplsTeTunnelRelMetric Integer32,
juniIsisMplsTeTunnelName OCTET STRING
}
juniIsisMplsTeTunnelSysInstance OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour."
::= { juniIsisMplsTeTunnelEntry 1 }
juniIsisMplsNextHopIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index to uniquely identify the tunnels."
::= { juniIsisMplsTeTunnelEntry 2 }
juniIsisMplsTeSystemId OBJECT-TYPE
SYNTAX SystemID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID for the instance of the Integrated IS-IS protocol
running in the tunnel's end point."
::= { juniIsisMplsTeTunnelEntry 3 }
juniIsisMplsTeRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the tunnel's end point."
::= { juniIsisMplsTeTunnelEntry 4 }
juniIsisMplsTeTunnelMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric associated with the tunnel."
::= { juniIsisMplsTeTunnelEntry 5 }
juniIsisMplsTeTunnelRelMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric associated with the tunnel relative to the spf path."
::= { juniIsisMplsTeTunnelEntry 6 }
juniIsisMplsTeTunnelName OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE (1..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name associated with the tunnel."
::= { juniIsisMplsTeTunnelEntry 7 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniIsisCompliances OBJECT IDENTIFIER ::= { juniIsisConformance 1 }
juniIsisMIBGroups OBJECT IDENTIFIER ::= { juniIsisConformance 2 }
--
-- Compliance Statements
--
juniIsisCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting ISIS
functionality. This statement became obsolete when the
juniIsisCircState object was added."
MODULE -- juniIsisMIB
MANDATORY-GROUPS {
juniIsisSystemMgmtGroup,
juniIsisCircuitMgmtGroup }
::= { juniIsisCompliances 1 } -- JUNOSe 2.0
juniIsisCompliance2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"Obsolete compliance statement for systems supporting ISIS
functionality. This statement became obsolete when MPSL support was
added."
MODULE -- juniIsisMIB
MANDATORY-GROUPS {
juniIsisSystemMgmtGroup,
juniIsisCircuitMgmtGroup2 }
::= { juniIsisCompliances 2 } -- JUNOSe 3.0
juniIsisCompliance3 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for systems supporting ISIS functionality. This
statement became obsolete when juniIsisCircBFDTable is implemented."
MODULE -- juniIsisMIB
MANDATORY-GROUPS {
juniIsisSystemMgmtGroup2,
juniIsisCircuitMgmtGroup2 }
::= { juniIsisCompliances 3 } -- JUNOSe 4.0
juniIsisCompliance4 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for systems supporting ISIS functionality."
MODULE -- juniIsisMIB
MANDATORY-GROUPS {
juniIsisSystemMgmtGroup2,
juniIsisCircuitMgmtGroup2,
juniIsisCircBFDGroup }
::= { juniIsisCompliances 4 }
juniIsisCompliance5 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for systems supporting ISIS functionality."
MODULE -- juniIsisMIB
MANDATORY-GROUPS {
juniIsisSystemMgmtGroup3,
juniIsisCircuitMgmtGroup2,
juniIsisCircBFDGroup }
::= { juniIsisCompliances 5 }
juniIsisCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting ISIS functionality."
MODULE -- juniIsisMIB
MANDATORY-GROUPS {
juniIsisSystemMgmtGroup4,
juniIsisCircuitMgmtGroup2,
juniIsisCircBFDGroup }
::= { juniIsisCompliances 6 }
--
-- Units of Conformance
--
juniIsisSystemMgmtGroup OBJECT-GROUP
OBJECTS {
juniIsisSysVersion,
juniIsisSysType,
juniIsisSysID,
juniIsisSysMaxPathSplits,
juniIsisSysMaxLSPGenInt,
juniIsisSysOrigLSPBuffSize,
juniIsisSysMaxAreaAddresses,
juniIsisSysMinL1LSPGenInt,
juniIsisSysMinL2LSPGenInt,
juniIsisSysPollESHelloRate,
juniIsisSysWaitTime,
juniIsisSysOperState,
juniIsisSysL1State,
juniIsisSysCorrLSPs,
juniIsisSysLSPL1DbaseOloads,
juniIsisSysManAddrDropFromAreas,
juniIsisSysAttmptToExMaxSeqNums,
juniIsisSysSeqNumSkips,
juniIsisSysOwnLSPPurges,
juniIsisSysIDFieldLenMismatches,
juniIsisSysMaxAreaAddrMismatches,
juniIsisSysL2State,
juniIsisSysLSPL2DbaseOloads,
juniIsisSysAuthFails,
juniIsisSysLSPIgnoreErrors,
juniIsisSysMaxAreaCheck,
juniIsisSysSetOverloadBit,
juniIsisSysSetOverloadBitStartupDuration,
juniIsisSysMaxLspLifetime ,
juniIsisSysL1SpfInterval,
juniIsisSysL2SpfInterval,
juniIsisSysIshHoldTime,
juniIsisSysIshConfigTimer,
juniIsisSysDistributeDomainWide,
juniIsisSysDistance,
juniIsisSysL1MetricStyle,
juniIsisSysL2MetricStyle,
juniIsisSysIsoRouteTag,
juniIsisManAreaAddrRowStatus,
juniIsisSysProtSuppRowStatus,
juniIsisSummAddrRowStatus,
juniIsisSummAddrOperState,
juniIsisSummAddrDefaultMetric,
juniIsisSummAddrDelayMetric,
juniIsisSummAddrExpenseMetric,
juniIsisSummAddrErrorMetric,
juniIsisSummLevel,
juniIsisSysHostNameAreaAddr,
juniIsisSysHostNameName,
juniIsisSysHostNameType,
juniIsisSysHostNameRowStatus,
juniIsisSysAreaAuthenticationPwd,
juniIsisSysAreaAuthenticationKeyType,
juniIsisSysAreaAuthenticationStartAcceptTime,
juniIsisSysAreaAuthenticationStartGenerateTime,
juniIsisSysAreaAuthenticationStopAcceptTime,
juniIsisSysAreaAuthenticationStopGenerateTime,
juniIsisSysAreaAuthenticationRowStatus,
juniIsisSysDomainAuthenticationPwd,
juniIsisSysDomainAuthenticationKeyType,
juniIsisSysDomainAuthenticationStartAcceptTime,
juniIsisSysDomainAuthenticationStartGenerateTime,
juniIsisSysDomainAuthenticationStopAcceptTime,
juniIsisSysDomainAuthenticationStopGenerateTime,
juniIsisSysDomainAuthenticationRowStatus }
STATUS obsolete
DESCRIPTION
"Obsolete system level objects for ISIS management functionality. This
group became obsolete when the MPLS management objects were added."
::= { juniIsisMIBGroups 1 }
juniIsisCircuitMgmtGroup OBJECT-GROUP
OBJECTS {
juniIsisCircLocalID,
juniIsisCircOperState,
juniIsisCircRowStatus,
juniIsisCircType,
juniIsisCircL1DefaultMetric,
juniIsisCircL1DelayMetric,
juniIsisCircL1ExpenseMetric,
juniIsisCircL1ErrorMetric,
juniIsisCircExtDomain,
juniIsisCircAdjChanges,
juniIsisCircInitFails,
juniIsisCircRejAdjs,
juniIsisCircOutCtrlPDUs,
juniIsisCircInCtrlPDUs,
juniIsisCircIDFieldLenMismatches,
juniIsisCircL2DefaultMetric,
juniIsisCircL2DelayMetric,
juniIsisCircL2ExpenseMetric,
juniIsisCircL2ErrorMetric,
juniIsisCircManL2Only,
juniIsisCircL1ISPriority,
juniIsisCircL1CircID,
juniIsisCircL1DesIS,
juniIsisCircLANL1DesISChanges,
juniIsisCircL2ISPriority,
juniIsisCircL2CircID,
juniIsisCircL2DesIS,
juniIsisCircLANL2DesISChanges,
juniIsisCircMCAddr,
juniIsisCircPtToPtCircID,
juniIsisCircL1HelloTimer,
juniIsisCircL2HelloTimer,
juniIsisCircL1HelloMultiplier,
juniIsisCircL2HelloMultiplier,
juniIsisCircMinLSPTransInt,
juniIsisCircMinLSPReTransInt,
juniIsisCircL1CSNPInterval,
juniIsisCircL2CSNPInterval,
juniIsisCircLSPThrottle,
juniIsisCircMeshGroupEnabled,
juniIsisCircMeshGroup,
juniIsisCircLevel,
juniIsisSysL1CircAuthenticationPwd,
juniIsisSysL1CircAuthenticationKeyType,
juniIsisSysL1CircAuthenticationStartAcceptTime,
juniIsisSysL1CircAuthenticationStartGenerateTime,
juniIsisSysL1CircAuthenticationStopAcceptTime,
juniIsisSysL1CircAuthenticationStopGenerateTime,
juniIsisSysL1CircAuthenticationRowStatus,
juniIsisSysL2CircAuthenticationPwd,
juniIsisSysL2CircAuthenticationKeyType,
juniIsisSysL2CircAuthenticationStartAcceptTime,
juniIsisSysL2CircAuthenticationStartGenerateTime,
juniIsisSysL2CircAuthenticationStopAcceptTime,
juniIsisSysL2CircAuthenticationStopGenerateTime,
juniIsisSysL2CircAuthenticationRowStatus }
STATUS obsolete
DESCRIPTION
"Obsolete circuit management objects. This group became obsolete when
the juniIsisCircState object was added."
::= { juniIsisMIBGroups 2 }
juniIsisCircuitMgmtGroup2 OBJECT-GROUP
OBJECTS {
juniIsisCircLocalID,
juniIsisCircOperState,
juniIsisCircRowStatus,
juniIsisCircType,
juniIsisCircL1DefaultMetric,
juniIsisCircL1DelayMetric,
juniIsisCircL1ExpenseMetric,
juniIsisCircL1ErrorMetric,
juniIsisCircExtDomain,
juniIsisCircAdjChanges,
juniIsisCircInitFails,
juniIsisCircRejAdjs,
juniIsisCircOutCtrlPDUs,
juniIsisCircInCtrlPDUs,
juniIsisCircIDFieldLenMismatches,
juniIsisCircL2DefaultMetric,
juniIsisCircL2DelayMetric,
juniIsisCircL2ExpenseMetric,
juniIsisCircL2ErrorMetric,
juniIsisCircManL2Only,
juniIsisCircL1ISPriority,
juniIsisCircL1CircID,
juniIsisCircL1DesIS,
juniIsisCircLANL1DesISChanges,
juniIsisCircL2ISPriority,
juniIsisCircL2CircID,
juniIsisCircL2DesIS,
juniIsisCircLANL2DesISChanges,
juniIsisCircMCAddr,
juniIsisCircPtToPtCircID,
juniIsisCircL1HelloTimer,
juniIsisCircL2HelloTimer,
juniIsisCircL1HelloMultiplier,
juniIsisCircL2HelloMultiplier,
juniIsisCircMinLSPTransInt,
juniIsisCircMinLSPReTransInt,
juniIsisCircL1CSNPInterval,
juniIsisCircL2CSNPInterval,
juniIsisCircLSPThrottle,
juniIsisCircMeshGroupEnabled,
juniIsisCircMeshGroup,
juniIsisCircLevel,
juniIsisCircState,
juniIsisSysL1CircAuthenticationPwd,
juniIsisSysL1CircAuthenticationKeyType,
juniIsisSysL1CircAuthenticationStartAcceptTime,
juniIsisSysL1CircAuthenticationStartGenerateTime,
juniIsisSysL1CircAuthenticationStopAcceptTime,
juniIsisSysL1CircAuthenticationStopGenerateTime,
juniIsisSysL1CircAuthenticationRowStatus,
juniIsisSysL2CircAuthenticationPwd,
juniIsisSysL2CircAuthenticationKeyType,
juniIsisSysL2CircAuthenticationStartAcceptTime,
juniIsisSysL2CircAuthenticationStartGenerateTime,
juniIsisSysL2CircAuthenticationStopAcceptTime,
juniIsisSysL2CircAuthenticationStopGenerateTime,
juniIsisSysL2CircAuthenticationRowStatus }
STATUS current
DESCRIPTION
"The circuit management objects."
::= { juniIsisMIBGroups 3 }
juniIsisSystemMgmtGroup2 OBJECT-GROUP
OBJECTS {
juniIsisSysVersion,
juniIsisSysType,
juniIsisSysID,
juniIsisSysMaxPathSplits,
juniIsisSysMaxLSPGenInt,
juniIsisSysOrigLSPBuffSize,
juniIsisSysMaxAreaAddresses,
juniIsisSysMinL1LSPGenInt,
juniIsisSysMinL2LSPGenInt,
juniIsisSysPollESHelloRate,
juniIsisSysWaitTime,
juniIsisSysOperState,
juniIsisSysL1State,
juniIsisSysCorrLSPs,
juniIsisSysLSPL1DbaseOloads,
juniIsisSysManAddrDropFromAreas,
juniIsisSysAttmptToExMaxSeqNums,
juniIsisSysSeqNumSkips,
juniIsisSysOwnLSPPurges,
juniIsisSysIDFieldLenMismatches,
juniIsisSysMaxAreaAddrMismatches,
juniIsisSysOrigL2LSPBuffSize,
juniIsisSysL2State,
juniIsisSysLSPL2DbaseOloads,
juniIsisSysAuthFails,
juniIsisSysLSPIgnoreErrors,
juniIsisSysMaxAreaCheck,
juniIsisSysSetOverloadBit,
juniIsisSysSetOverloadBitStartupDuration,
juniIsisSysMaxLspLifetime ,
juniIsisSysL1SpfInterval,
juniIsisSysL2SpfInterval,
juniIsisSysIshHoldTime,
juniIsisSysIshConfigTimer,
juniIsisSysDistributeDomainWide,
juniIsisSysDistance,
juniIsisSysL1MetricStyle,
juniIsisSysL2MetricStyle,
juniIsisSysIsoRouteTag,
juniIsisSysMplsTeLevel,
juniIsisSysMplsTeRtrIdIfIndex,
juniIsisManAreaAddrRowStatus,
juniIsisSysProtSuppRowStatus,
juniIsisSummAddrRowStatus,
juniIsisSummAddrOperState,
juniIsisSummAddrDefaultMetric,
juniIsisSummAddrDelayMetric,
juniIsisSummAddrExpenseMetric,
juniIsisSummAddrErrorMetric,
juniIsisSummLevel,
juniIsisSysHostNameAreaAddr,
juniIsisSysHostNameName,
juniIsisSysHostNameType,
juniIsisSysHostNameRowStatus,
juniIsisSysAreaAuthenticationPwd,
juniIsisSysAreaAuthenticationKeyType,
juniIsisSysAreaAuthenticationStartAcceptTime,
juniIsisSysAreaAuthenticationStartGenerateTime,
juniIsisSysAreaAuthenticationStopAcceptTime,
juniIsisSysAreaAuthenticationStopGenerateTime,
juniIsisSysAreaAuthenticationRowStatus,
juniIsisSysDomainAuthenticationPwd,
juniIsisSysDomainAuthenticationKeyType,
juniIsisSysDomainAuthenticationStartAcceptTime,
juniIsisSysDomainAuthenticationStartGenerateTime,
juniIsisSysDomainAuthenticationStopAcceptTime,
juniIsisSysDomainAuthenticationStopGenerateTime,
juniIsisSysDomainAuthenticationRowStatus }
STATUS obsolete
DESCRIPTION
"Obsolete system level objects for ISIS management functionality. This
group became obsolete when the MPLS tunnel table was added."
::= { juniIsisMIBGroups 4 }
juniIsisCircBFDGroup OBJECT-GROUP
OBJECTS {
juniIsisCircBfdEnable,
juniIsisCircBfdMinRxInterval,
juniIsisCircBfdMinTxInterval,
juniIsisCircBfdMultiplier
}
STATUS current
DESCRIPTION
"The circuit level ISIS BFD configuration parameters."
::= { juniIsisMIBGroups 5 }
juniIsisSystemMgmtGroup3 OBJECT-GROUP
OBJECTS {
juniIsisSysVersion,
juniIsisSysType,
juniIsisSysID,
juniIsisSysMaxPathSplits,
juniIsisSysMaxLSPGenInt,
juniIsisSysOrigLSPBuffSize,
juniIsisSysMaxAreaAddresses,
juniIsisSysMinL1LSPGenInt,
juniIsisSysMinL2LSPGenInt,
juniIsisSysPollESHelloRate,
juniIsisSysWaitTime,
juniIsisSysOperState,
juniIsisSysL1State,
juniIsisSysCorrLSPs,
juniIsisSysLSPL1DbaseOloads,
juniIsisSysManAddrDropFromAreas,
juniIsisSysAttmptToExMaxSeqNums,
juniIsisSysSeqNumSkips,
juniIsisSysOwnLSPPurges,
juniIsisSysIDFieldLenMismatches,
juniIsisSysMaxAreaAddrMismatches,
juniIsisSysOrigL2LSPBuffSize,
juniIsisSysL2State,
juniIsisSysLSPL2DbaseOloads,
juniIsisSysAuthFails,
juniIsisSysLSPIgnoreErrors,
juniIsisSysMaxAreaCheck,
juniIsisSysSetOverloadBit,
juniIsisSysSetOverloadBitStartupDuration,
juniIsisSysMaxLspLifetime ,
juniIsisSysL1SpfInterval,
juniIsisSysL2SpfInterval,
juniIsisSysIshHoldTime,
juniIsisSysIshConfigTimer,
juniIsisSysDistributeDomainWide,
juniIsisSysDistance,
juniIsisSysL1MetricStyle,
juniIsisSysL2MetricStyle,
juniIsisSysIsoRouteTag,
juniIsisSysMplsTeLevel,
juniIsisSysMplsTeRtrIdIfIndex,
juniIsisSysMplsTeSpfUseAnyBestPath,
juniIsisManAreaAddrRowStatus,
juniIsisSysProtSuppRowStatus,
juniIsisSummAddrRowStatus,
juniIsisSummAddrOperState,
juniIsisSummAddrDefaultMetric,
juniIsisSummAddrDelayMetric,
juniIsisSummAddrExpenseMetric,
juniIsisSummAddrErrorMetric,
juniIsisSummLevel,
juniIsisSysHostNameAreaAddr,
juniIsisSysHostNameName,
juniIsisSysHostNameType,
juniIsisSysHostNameRowStatus,
juniIsisSysAreaAuthenticationPwd,
juniIsisSysAreaAuthenticationKeyType,
juniIsisSysAreaAuthenticationStartAcceptTime,
juniIsisSysAreaAuthenticationStartGenerateTime,
juniIsisSysAreaAuthenticationStopAcceptTime,
juniIsisSysAreaAuthenticationStopGenerateTime,
juniIsisSysAreaAuthenticationRowStatus,
juniIsisSysDomainAuthenticationPwd,
juniIsisSysDomainAuthenticationKeyType,
juniIsisSysDomainAuthenticationStartAcceptTime,
juniIsisSysDomainAuthenticationStartGenerateTime,
juniIsisSysDomainAuthenticationStopAcceptTime,
juniIsisSysDomainAuthenticationStopGenerateTime,
juniIsisSysDomainAuthenticationRowStatus,
juniIsisMplsTeSystemId,
juniIsisMplsTeRouterId,
juniIsisMplsTeTunnelMetric,
juniIsisMplsTeTunnelRelMetric,
juniIsisMplsTeTunnelName }
STATUS obsolete
DESCRIPTION
"Obsolete system level objects for ISIS management functionality. This
group became obsolete when the reference bandwidth related variables were added."
::= { juniIsisMIBGroups 6 }
juniIsisSystemMgmtGroup4 OBJECT-GROUP
OBJECTS {
juniIsisSysVersion,
juniIsisSysType,
juniIsisSysID,
juniIsisSysMaxPathSplits,
juniIsisSysMaxLSPGenInt,
juniIsisSysOrigLSPBuffSize,
juniIsisSysMaxAreaAddresses,
juniIsisSysMinL1LSPGenInt,
juniIsisSysMinL2LSPGenInt,
juniIsisSysPollESHelloRate,
juniIsisSysWaitTime,
juniIsisSysOperState,
juniIsisSysL1State,
juniIsisSysCorrLSPs,
juniIsisSysLSPL1DbaseOloads,
juniIsisSysManAddrDropFromAreas,
juniIsisSysAttmptToExMaxSeqNums,
juniIsisSysSeqNumSkips,
juniIsisSysOwnLSPPurges,
juniIsisSysIDFieldLenMismatches,
juniIsisSysMaxAreaAddrMismatches,
juniIsisSysOrigL2LSPBuffSize,
juniIsisSysL2State,
juniIsisSysLSPL2DbaseOloads,
juniIsisSysAuthFails,
juniIsisSysLSPIgnoreErrors,
juniIsisSysMaxAreaCheck,
juniIsisSysSetOverloadBit,
juniIsisSysSetOverloadBitStartupDuration,
juniIsisSysMaxLspLifetime ,
juniIsisSysL1SpfInterval,
juniIsisSysL2SpfInterval,
juniIsisSysIshHoldTime,
juniIsisSysIshConfigTimer,
juniIsisSysDistributeDomainWide,
juniIsisSysDistance,
juniIsisSysL1MetricStyle,
juniIsisSysL2MetricStyle,
juniIsisSysIsoRouteTag,
juniIsisSysMplsTeLevel,
juniIsisSysMplsTeRtrIdIfIndex,
juniIsisSysMplsTeSpfUseAnyBestPath,
juniIsisSysReferenceBandwidth,
juniIsisSysHighReferenceBandwidth,
juniIsisManAreaAddrRowStatus,
juniIsisSysProtSuppRowStatus,
juniIsisSummAddrRowStatus,
juniIsisSummAddrOperState,
juniIsisSummAddrDefaultMetric,
juniIsisSummAddrDelayMetric,
juniIsisSummAddrExpenseMetric,
juniIsisSummAddrErrorMetric,
juniIsisSummLevel,
juniIsisSysHostNameAreaAddr,
juniIsisSysHostNameName,
juniIsisSysHostNameType,
juniIsisSysHostNameRowStatus,
juniIsisSysAreaAuthenticationPwd,
juniIsisSysAreaAuthenticationKeyType,
juniIsisSysAreaAuthenticationStartAcceptTime,
juniIsisSysAreaAuthenticationStartGenerateTime,
juniIsisSysAreaAuthenticationStopAcceptTime,
juniIsisSysAreaAuthenticationStopGenerateTime,
juniIsisSysAreaAuthenticationRowStatus,
juniIsisSysDomainAuthenticationPwd,
juniIsisSysDomainAuthenticationKeyType,
juniIsisSysDomainAuthenticationStartAcceptTime,
juniIsisSysDomainAuthenticationStartGenerateTime,
juniIsisSysDomainAuthenticationStopAcceptTime,
juniIsisSysDomainAuthenticationStopGenerateTime,
juniIsisSysDomainAuthenticationRowStatus,
juniIsisMplsTeSystemId,
juniIsisMplsTeRouterId,
juniIsisMplsTeTunnelMetric,
juniIsisMplsTeTunnelRelMetric,
juniIsisMplsTeTunnelName }
STATUS current
DESCRIPTION
"The system level objects for ISIS management functionality."
::= { juniIsisMIBGroups 7 }
END