3078 lines
110 KiB
Plaintext
3078 lines
110 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-ISIS-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- Integrated IS-IS MIB
|
|
--
|
|
-- Copyright (c) 1997 The Internet Society.
|
|
-- Copyright (c) 2000, 2001 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-ISIS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, IpAddress, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
juniMibs
|
|
FROM Juniper-MIBs;
|
|
|
|
juniIsisMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200603131430Z" -- 13-Mar-06 02:30 PM EST
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The intermediate system to intermediate system (IS-IS) routing protocol
|
|
MIB for Juniper Networks E-series products. This MIB provides
|
|
objects for management of the IS-IS Routing protocol, as described in
|
|
ISO 10589, when it is used to construct routing tables for IP networks,
|
|
as described in RFC 1195."
|
|
-- Revision History
|
|
REVISION "200612131330Z" -- 13-Dec-06 01:30 PM EST - JUNOSe 8.0
|
|
DESCRIPTION
|
|
"Modifiled width of juniIsisMplsTeTunnelName from 32 to 40"
|
|
REVISION "200603011430Z" -- 13-Mar-06 02:30 PM EST - JUNOSe 7.4
|
|
DESCRIPTION
|
|
"Added juniIsisSysReferenceBandwidth and juniIsisSysHighReferenceBandwidth
|
|
to juniIsisSysEntry"
|
|
REVISION "200603011430Z" -- 01-Mar-06 02:30 PM EST - JUNOSe 7.4
|
|
DESCRIPTION
|
|
"Added juniIsisSysMplsTeSpfUseAnyBestPath to juniIsisSysEntry.
|
|
Added juniIsisMplsTeTunnelTable to juniIsisSystemGroup"
|
|
REVISION "200512261430Z" -- 26-Dec-05 09:30 AM EST - JUNOSe 7.0
|
|
DESCRIPTION
|
|
"Default value for juniIsisSysLSPIgnoreErrors is changed from false to true.
|
|
Default value for juniIsisCircMeshGroup =1 is removed"
|
|
REVISION "200510210810Z" -- 21-Oct-05 03:10 AM EST - RX 6.1.0
|
|
DESCRIPTION
|
|
"L2 Buffer Size is added and is made obsolete."
|
|
REVISION "200503291430Z" -- 29-Mar-05 09:30 AM EST - JUNOSe 7.0
|
|
DESCRIPTION
|
|
"Updated the SystemID TEXTUAL-CONVENTION to be inline with standard
|
|
- SystemID should now be exactly 6 bytes.
|
|
- SystemID description modified. All zeros are invalid."
|
|
REVISION "200501170810Z" -- 17-Jan-05 03:10 AM EST - RX 6.1.0
|
|
DESCRIPTION
|
|
"Updated the upper bound for Max Split Paths and removed the
|
|
L2 Buffer Size"
|
|
REVISION "200501060504Z" -- 06-Jan-05 01:04 AM EST - JUNOSe 7.0
|
|
DESCRIPTION
|
|
"Modified the default value for the juniIsisSysSetOverloadBitStartupDuration
|
|
object. This object has a meaning only if the ISIS overload bit
|
|
is set."
|
|
REVISION "200411020504Z" -- 02-Nov-04 01:04 AM EST - RX 5.2.2
|
|
DESCRIPTION
|
|
"Updated the upper bound for Authentication Key Id in Area
|
|
Authentication, Domain Authentication, L1 Circuit and L2 Circuit
|
|
Tables."
|
|
REVISION "200410181414Z" -- 18-Oct-04 09:14 AM EST - RX 5.0.4
|
|
DESCRIPTION
|
|
"Changed the lower bound value & default value of juniIsisSysSetOverloadBitStartupDuration
|
|
from 0 to 5."
|
|
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200112102129Z" -- 10-Dec-01 04:29 PM EST - JUNOSe 4.0
|
|
DESCRIPTION
|
|
"Added MPLS support."
|
|
REVISION "200112071522Z" -- 07-Dec-01 10:22 AM EST - JUNOSe 3.3
|
|
DESCRIPTION
|
|
"Added support for simple password protection."
|
|
REVISION "200104172126Z" -- 17-Apr-01 05:26 PM EDT - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Add circuit state object."
|
|
REVISION "200002220000Z" -- 22-Feb-00 - JUNOSe 2.0
|
|
DESCRIPTION
|
|
"Initial version of this MIB module, based on draft-ietf-isis-wg-mib."
|
|
::= { juniMibs 38 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Type definitions
|
|
--
|
|
OSINSAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSI Network Service Address, e.g. NSAP, Network Entity Title"
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
|
|
SystemID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A system ID of exactly six bytes.
|
|
Must not be all zeros."
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
|
|
OperState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type used in enabling and disabling a row."
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2) }
|
|
|
|
AuthTime ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Then number of seconds since Jan. 1 1970."
|
|
SYNTAX Integer32
|
|
|
|
LSPBuffSize ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub range for LSP size."
|
|
SYNTAX Integer32 (512..9180)
|
|
|
|
LevelState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States of the ISIS protocol."
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2),
|
|
waiting(3) }
|
|
|
|
SupportedProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Types of network protocol supported by Integrated ISIS. The values for
|
|
ISO8473 and IP are those registered for these protocols in ISO TR9577."
|
|
SYNTAX INTEGER {
|
|
iso8473(129),
|
|
ip(204),
|
|
ipV6(205) }
|
|
|
|
JuniDefaultMetric ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for default metric for single hop. The value is
|
|
truncated to 63 when the juniIsisSysL1MetricStyle or
|
|
juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow "
|
|
SYNTAX Integer32 (0..16777215)
|
|
|
|
OtherMetric ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for metrics other than the default metric for single
|
|
hop."
|
|
SYNTAX Integer32 (0..63)
|
|
|
|
CircuitID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ID for a circuit."
|
|
SYNTAX OCTET STRING (SIZE(2..9))
|
|
|
|
ISPriority ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for ISIS priority."
|
|
SYNTAX Integer32 (1..127)
|
|
|
|
|
|
-- Behaviour Definitions
|
|
|
|
-- ResettingTimer behaviour definition
|
|
-- "This object specifies the interval between certain events in
|
|
-- the operation of the protocol state machine. If the value of
|
|
-- this object is set to a new value while the protocol state
|
|
-- machine is in operation, the implementation shall take the
|
|
-- necessary steps to ensure that for any time interval which
|
|
-- was in progress when the value of the corresponding object
|
|
-- was changed, the next expiration of that interval takes place
|
|
-- the specified time after the original start of that interval,
|
|
-- or immediately, whichever is later. The precision with which
|
|
-- this time shall be implemented shall be the same as that
|
|
-- associated with the basic operation of the timer object."
|
|
|
|
-- OperationalState behaviour definition
|
|
-- "This object controls the enabling and disabling of the
|
|
-- corresponding table row. Setting this object to the value
|
|
-- off has the effect of disabling the corresponding row.
|
|
-- Setting this object to the value on has the effect of
|
|
-- enabling the corresponding row. Setting the value of this
|
|
-- object to the same value as its current value has no effect.
|
|
-- If the table entry also contains an object controlling the
|
|
-- RowStatus then the object following the operationalState
|
|
-- behaviour shall not be set to on when the object following
|
|
-- the RowStatus behaviour has value off. An attempt to do
|
|
-- so is rejected."
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniIsisObjects OBJECT IDENTIFIER ::= { juniIsisMIB 1 }
|
|
juniIsisTrapGroup OBJECT IDENTIFIER ::= { juniIsisMIB 2 }
|
|
juniIsisConformance OBJECT IDENTIFIER ::= { juniIsisMIB 3 }
|
|
|
|
juniIsisSystemGroup OBJECT IDENTIFIER ::= { juniIsisObjects 1}
|
|
juniIsisCircuitGroup OBJECT IDENTIFIER ::= { juniIsisObjects 2 }
|
|
|
|
juniIsisSysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of instances of the Integrated IS-IS protocol existing on the
|
|
system."
|
|
::= { juniIsisSystemGroup 1 }
|
|
|
|
juniIsisSysEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row defines information specific to a single instance of the
|
|
protocol existing on the system."
|
|
REFERENCE
|
|
"ISIS.poi cLNSISISBasic-P (1)"
|
|
INDEX { juniIsisSysInstance }
|
|
::= { juniIsisSysTable 1 }
|
|
|
|
JuniIsisSysEntry ::= SEQUENCE {
|
|
juniIsisSysInstance Integer32,
|
|
juniIsisSysVersion DisplayString,
|
|
juniIsisSysType INTEGER,
|
|
juniIsisSysID SystemID,
|
|
juniIsisSysMaxPathSplits Integer32,
|
|
juniIsisSysMaxLSPGenInt Integer32,
|
|
juniIsisSysOrigLSPBuffSize LSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses Integer32,
|
|
juniIsisSysMinL1LSPGenInt Integer32,
|
|
juniIsisSysMinL2LSPGenInt Integer32,
|
|
juniIsisSysPollESHelloRate Integer32,
|
|
juniIsisSysWaitTime Integer32,
|
|
juniIsisSysOperState OperState,
|
|
juniIsisSysL1State LevelState,
|
|
juniIsisSysCorrLSPs Counter32,
|
|
juniIsisSysLSPL1DbaseOloads Counter32,
|
|
juniIsisSysManAddrDropFromAreas Counter32,
|
|
juniIsisSysAttmptToExMaxSeqNums Counter32,
|
|
juniIsisSysSeqNumSkips Counter32,
|
|
juniIsisSysOwnLSPPurges Counter32,
|
|
juniIsisSysIDFieldLenMismatches Counter32,
|
|
juniIsisSysMaxAreaAddrMismatches Counter32,
|
|
juniIsisSysOrigL2LSPBuffSize LSPBuffSize,
|
|
juniIsisSysL2State LevelState,
|
|
juniIsisSysLSPL2DbaseOloads Counter32,
|
|
juniIsisSysAuthFails Counter32,
|
|
juniIsisSysLSPIgnoreErrors TruthValue,
|
|
juniIsisSysMaxAreaCheck TruthValue,
|
|
juniIsisSysSetOverloadBit TruthValue,
|
|
juniIsisSysSetOverloadBitStartupDuration Integer32,
|
|
juniIsisSysMaxLspLifetime Integer32,
|
|
juniIsisSysL1SpfInterval Integer32,
|
|
juniIsisSysL2SpfInterval Integer32,
|
|
juniIsisSysIshHoldTime Integer32,
|
|
juniIsisSysIshConfigTimer Integer32,
|
|
juniIsisSysDistributeDomainWide TruthValue,
|
|
juniIsisSysDistance Integer32,
|
|
juniIsisSysL1MetricStyle INTEGER,
|
|
juniIsisSysL2MetricStyle INTEGER,
|
|
juniIsisSysIsoRouteTag OCTET STRING,
|
|
juniIsisSysMplsTeLevel INTEGER,
|
|
juniIsisSysMplsTeRtrIdIfIndex InterfaceIndexOrZero,
|
|
juniIsisSysMplsTeSpfUseAnyBestPath TruthValue,
|
|
juniIsisSysReferenceBandwidth Gauge32,
|
|
juniIsisSysHighReferenceBandwidth Gauge32 }
|
|
|
|
juniIsisSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysEntry 1 }
|
|
|
|
juniIsisSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..24))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the IS-IS protocol to which this instance
|
|
conforms. This value must be set by the implementation when the row is
|
|
valid."
|
|
REFERENCE
|
|
"ISIS.aoi version (1)"
|
|
::= { juniIsisSysEntry 2 }
|
|
|
|
juniIsisSysType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level1IS(1),
|
|
level1l2IS(2),
|
|
level2Only(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this instance of the Integrated IS-IS protocol. This
|
|
object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi iSType (2)"
|
|
::= { juniIsisSysEntry 3 }
|
|
|
|
juniIsisSysID OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for this instance of the Integrated IS-IS protocol. This value
|
|
is appended to each of the instance's area addresses to form the Network
|
|
Entity Titles valid for this instance. The derivation of a value for
|
|
this object is implementation-specific. Some implementations may assign
|
|
values and not permit write MAX-ACCESS, others may require the value to
|
|
be set manually."
|
|
REFERENCE
|
|
"ISIS.aoi systemId (119)"
|
|
::= { juniIsisSysEntry 4 }
|
|
|
|
juniIsisSysMaxPathSplits OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of paths with equal routing metric value which it is
|
|
permitted to split between. This object follows the
|
|
replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi maximumPathSplits (3)"
|
|
DEFVAL { 4 }
|
|
::= { juniIsisSysEntry 5 }
|
|
|
|
juniIsisSysMaxLSPGenInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum interval, in seconds, between generated LSPs by this instance.
|
|
This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi maximumLSPGenerationInterval (6)"
|
|
DEFVAL { 900 }
|
|
::= { juniIsisSysEntry 6 }
|
|
|
|
juniIsisSysOrigLSPBuffSize OBJECT-TYPE
|
|
SYNTAX LSPBuffSize
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size of LSPs and SNPs originated by this instance.
|
|
This object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi originatingLSPBufferSize (9)"
|
|
DEFVAL { 1497 }
|
|
::= { juniIsisSysEntry 7 }
|
|
|
|
juniIsisSysMaxAreaAddresses OBJECT-TYPE
|
|
SYNTAX Integer32 (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of area addresses to be permitted for the area in
|
|
which this instance exists. Note that all Intermediate Systems in the
|
|
same area must have the same value configured for this attribute if
|
|
correct operation is to be assumed. This object follows the
|
|
replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi maximumAreaAddresses (4)"
|
|
DEFVAL { 3 }
|
|
::= { juniIsisSysEntry 8 }
|
|
|
|
juniIsisSysMinL1LSPGenInt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between successive generation of L1 LSPs
|
|
with the same LSPID by this instance. This object follows the
|
|
resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi minimumLSPGenerationInterval (11)"
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 9 }
|
|
|
|
juniIsisSysMinL2LSPGenInt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between successive generation of L2 LSPs
|
|
with the same LSPID by this instance. This object follows the
|
|
resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi minimumLSPGenerationInterval (11)"
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 10 }
|
|
|
|
juniIsisSysPollESHelloRate OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value, in seconds, to be used for the suggested ES configuration
|
|
timer in ISH PDUs when soliciting the ES configuration."
|
|
REFERENCE
|
|
"ISIS.aoi pollESHelloRate (13)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisSysEntry 11 }
|
|
|
|
juniIsisSysWaitTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds to delay in waiting state before entering on state.
|
|
This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi waitingTime (15)"
|
|
DEFVAL { 60 }
|
|
::= { juniIsisSysEntry 12 }
|
|
|
|
juniIsisSysOperState OBJECT-TYPE
|
|
SYNTAX OperState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of this instance of the Integrated IS-IS
|
|
protocol. Setting this object to the value on when its current value is
|
|
off enables operation of this instance of the Integrated IS-IS
|
|
protocol."
|
|
DEFVAL { off }
|
|
::= { juniIsisSysEntry 13 }
|
|
|
|
juniIsisSysL1State OBJECT-TYPE
|
|
SYNTAX LevelState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Level 1 database."
|
|
REFERENCE
|
|
"ISIS.aoi l1State (17)"
|
|
::= { juniIsisSysEntry 14 }
|
|
|
|
juniIsisSysCorrLSPs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of corrupted LSPs detected."
|
|
REFERENCE
|
|
"ISIS.aoi corruptedLSPsDetected (19)"
|
|
::= { juniIsisSysEntry 15 }
|
|
|
|
juniIsisSysLSPL1DbaseOloads OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the LSP L1 database has become overloaded."
|
|
REFERENCE
|
|
"ISIS.aoi lSPL1DatabaseOverloads (20)"
|
|
::= { juniIsisSysEntry 16 }
|
|
|
|
juniIsisSysManAddrDropFromAreas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a manual address has been dropped from the area."
|
|
REFERENCE
|
|
"ISIS.aoi manualAddressesDroppedFromArea (21)"
|
|
::= { juniIsisSysEntry 17 }
|
|
|
|
juniIsisSysAttmptToExMaxSeqNums OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the IS has attempted to exceed the maximum sequence
|
|
number."
|
|
REFERENCE
|
|
"ISIS.aoi attemptsToExceedmaximumSequenceNumber (22)"
|
|
::= { juniIsisSysEntry 18 }
|
|
|
|
juniIsisSysSeqNumSkips OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a sequence number skip has occurred."
|
|
REFERENCE
|
|
"ISIS.aoi sequenceNumberSkips (23)"
|
|
::= { juniIsisSysEntry 19 }
|
|
|
|
juniIsisSysOwnLSPPurges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a zero-aged copy of the system's own LSP is received
|
|
from some other node."
|
|
REFERENCE
|
|
"ISIS.aoi ownLSPPurges (24)"
|
|
::= { juniIsisSysEntry 20 }
|
|
|
|
juniIsisSysIDFieldLenMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a PDU is received with a different value for ID field
|
|
length to that of the receiving system."
|
|
REFERENCE
|
|
"ISIS.aoi iDFieldLengthMismatches (25)"
|
|
::= { juniIsisSysEntry 21 }
|
|
|
|
juniIsisSysMaxAreaAddrMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a PDU is received with a different value for
|
|
MaximumAreaAddresses from that of the receiving system."
|
|
REFERENCE
|
|
"ISIS.aoi MaximumAreaAddressesMismatches (118)"
|
|
::= { juniIsisSysEntry 22 }
|
|
|
|
-- The following objects map those from the cLNSISISLevel2-P Package
|
|
|
|
juniIsisSysOrigL2LSPBuffSize OBJECT-TYPE
|
|
SYNTAX LSPBuffSize
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The maximum size of Level 2 LSPs and SNPs originated by this system.
|
|
This object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi originatingL2LSPBufferSize (26)"
|
|
DEFVAL { 1497 }
|
|
::= { juniIsisSysEntry 23 }
|
|
|
|
juniIsisSysL2State OBJECT-TYPE
|
|
SYNTAX LevelState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the Level 2 database."
|
|
REFERENCE
|
|
"ISIS.aoi l2State (28)"
|
|
::= { juniIsisSysEntry 24 }
|
|
|
|
juniIsisSysLSPL2DbaseOloads OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the Level 2 LSP database has become overloaded."
|
|
REFERENCE
|
|
"ISIS.aoi lSPL2DatabaseOverloads (32)"
|
|
::= { juniIsisSysEntry 25 }
|
|
|
|
juniIsisSysAuthFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication failures recognized by this instance of
|
|
the protocol."
|
|
::= { juniIsisSysEntry 26 }
|
|
|
|
juniIsisSysLSPIgnoreErrors OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, allow the router to ignore IS-IS link state packets (LSPs)
|
|
that are received with internal checksum errors rather than purging the
|
|
LSPs."
|
|
DEFVAL { true }
|
|
::= { juniIsisSysEntry 27 }
|
|
|
|
juniIsisSysMaxAreaCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When on, enables checking of maximum area addresses per IS version of
|
|
ISO10589."
|
|
DEFVAL { true }
|
|
::= { juniIsisSysEntry 28 }
|
|
|
|
juniIsisSysSetOverloadBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Isis overload bit"
|
|
DEFVAL { false }
|
|
::= { juniIsisSysEntry 29 }
|
|
|
|
juniIsisSysSetOverloadBitStartupDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (0|5..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Specifies the length in time of seconds to set the overload bit from
|
|
startup. This object must be set together with
|
|
juniIsisSysSetOverloadBit, otherwise the agent will return zero.
|
|
Zero value for this object implies that the overload bit is not set.
|
|
Zero value does not have any meaning for this object."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysEntry 30 }
|
|
|
|
juniIsisSysMaxLspLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum time (in seconds) a LSP will remain in the box
|
|
without being refreshed before being considered invalid."
|
|
DEFVAL { 1200 }
|
|
::= { juniIsisSysEntry 31 }
|
|
|
|
juniIsisSysL1SpfInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between level 1 SPF calculations."
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 32 }
|
|
|
|
juniIsisSysL2SpfInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between level 2 SPF calculations."
|
|
DEFVAL { 5 }
|
|
::= { juniIsisSysEntry 33 }
|
|
|
|
juniIsisSysIshHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify a holdtime advertised in ESH/ISH PDUs."
|
|
DEFVAL { 30 }
|
|
::= { juniIsisSysEntry 34 }
|
|
|
|
juniIsisSysIshConfigTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the rate of transmission for ESH and ISH packets."
|
|
DEFVAL { 10 }
|
|
::= { juniIsisSysEntry 35 }
|
|
|
|
juniIsisSysDistributeDomainWide OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When on, enables distribution of prefixes throughout a multi-level
|
|
domain."
|
|
DEFVAL { false }
|
|
::= { juniIsisSysEntry 36 }
|
|
|
|
juniIsisSysDistance OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight applied to IS-IS routes."
|
|
DEFVAL { 115 }
|
|
::= { juniIsisSysEntry 37 }
|
|
|
|
juniIsisSysL1MetricStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
juniIsisMetricStyleNarrow(2),
|
|
juniIsisMetricStyleNarrowTransition(3),
|
|
juniIsisMetricStyleTransition(4),
|
|
juniIsisMetricStyleWide(5),
|
|
juniIsisMetricStyleWideTransition(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of IP reachability TLV to advertise in level 1
|
|
LSPs."
|
|
DEFVAL { juniIsisMetricStyleNarrow }
|
|
::= { juniIsisSysEntry 38 }
|
|
|
|
juniIsisSysL2MetricStyle OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
juniIsisMetricStyleNarrow(2),
|
|
juniIsisMetricStyleNarrowTransition(3),
|
|
juniIsisMetricStyleTransition(4),
|
|
juniIsisMetricStyleWide(5),
|
|
juniIsisMetricStyleWideTransition(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of IP reachability TLV to advertise in level 2
|
|
LSPs."
|
|
DEFVAL { juniIsisMetricStyleNarrow }
|
|
::= { juniIsisSysEntry 39 }
|
|
|
|
juniIsisSysIsoRouteTag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..19))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISO routing area tag."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysEntry 40 }
|
|
|
|
juniIsisSysMplsTeLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
levelNone(0),
|
|
level1(1),
|
|
level2(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select flooding of MPLS traffic engineering link information into the
|
|
specified ISIS level."
|
|
::= { juniIsisSysEntry 41 }
|
|
|
|
juniIsisSysMplsTeRtrIdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the stable router interface ID to designate it as TE capable.
|
|
A value of zero is used to remove any configured router interface ID."
|
|
::= { juniIsisSysEntry 42 }
|
|
|
|
juniIsisSysMplsTeSpfUseAnyBestPath OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure whether or not to consider spf paths when alternate
|
|
tunnel path exists"
|
|
::= { juniIsisSysEntry 43 }
|
|
|
|
juniIsisSysReferenceBandwidth OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the reference bandwitdth used to calculate the link cost in
|
|
bits per second.If the reference bandwidth is greater than the maximum
|
|
value reportable by this object then this object should report its
|
|
maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must
|
|
be used to report the reference bandwidth. "
|
|
::= { juniIsisSysEntry 44 }
|
|
|
|
juniIsisSysHighReferenceBandwidth OBJECT-TYPE
|
|
SYNTAX Gauge32(1..1000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the reference bandwitdth in mega bits per second.
|
|
It is used to calculate the link cost."
|
|
::= { juniIsisSysEntry 45 }
|
|
|
|
--
|
|
-- The Level 1 Manual Area Address Table contains the set of area addresses
|
|
-- manually configured for each instance of the Integrated IS-IS protocol.
|
|
-- At least one row in which the value of juniIsisManAreaAddRowStatus is on
|
|
-- must be present for each instance of the protocol when juniIsisSysOperState
|
|
-- is also on for that instance. The maximum number of rows in this table for
|
|
-- each instance of the protocol for which the object
|
|
-- juniIsisManAreaAddrRowStatus has the value on is the value of
|
|
-- maximumAreaAddresses (as defined in ISO 10589) for that instance.
|
|
-- An Attempt to create a new row such that the number of rows with
|
|
-- juniIsisManAreaAddrRowStatus set to on for that protocol instance exceeds
|
|
-- maximumAreaAddresses is rejected.
|
|
--
|
|
juniIsisManAreaAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisManAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of manual area addresses configured on this Intermediate
|
|
System."
|
|
REFERENCE
|
|
"ISIS.aoi manualAreaAddresses (10)"
|
|
::= { juniIsisSystemGroup 2 }
|
|
|
|
juniIsisManAreaAddrEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisManAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one area address manually configured on this
|
|
system."
|
|
INDEX { juniIsisManAreaAddrSysInstance,
|
|
juniIsisManAreaAddr }
|
|
::= { juniIsisManAreaAddrTable 1 }
|
|
|
|
JuniIsisManAreaAddrEntry ::= SEQUENCE {
|
|
juniIsisManAreaAddrSysInstance Integer32,
|
|
juniIsisManAreaAddr OSINSAddress,
|
|
juniIsisManAreaAddrRowStatus RowStatus }
|
|
|
|
juniIsisManAreaAddrSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisManAreaAddrEntry 1 }
|
|
|
|
juniIsisManAreaAddr OBJECT-TYPE
|
|
SYNTAX OSINSAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A manually configured area address for this system. This object
|
|
follows the index behaviour.
|
|
|
|
Note: an index for the entry {1, {49.0001} active} in this table would
|
|
be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an
|
|
octet string is part of the OID."
|
|
::= { juniIsisManAreaAddrEntry 2 }
|
|
|
|
juniIsisManAreaAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the juniIsisManAreaAddrEntry. This object follows the
|
|
RowStatus behaviour. If an attempt is made to set this object to the
|
|
value off when the corresponding juniIsisManAreaAddrEntry is the only
|
|
valid entry for this instance and when the corresponding IS-IS instance
|
|
has juniIsisSysOperState set to on then the attempt is rejected."
|
|
DEFVAL { active }
|
|
::= { juniIsisManAreaAddrEntry 3 }
|
|
|
|
|
|
--
|
|
-- The System Integrated Group
|
|
--
|
|
-- The System Integrated Group is present if the system supports Integrated ISIS
|
|
-- at Level 1.
|
|
--
|
|
-- The System Protocol Supported Table
|
|
--
|
|
-- The System Protocol Supported Table contains the manually configured set of
|
|
-- protocols supported by each instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysProtSuppTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysProtSuppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of protocols supported
|
|
by each instance of the Integrated ISIS protocol."
|
|
::= { juniIsisSystemGroup 3 }
|
|
|
|
juniIsisSysProtSuppEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysProtSuppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one protocol supported by an instance of the
|
|
Integrated ISIS protocol."
|
|
INDEX { juniIsisSysProtSuppSysInstance,
|
|
juniIsisSysProtSuppProtocol }
|
|
::= { juniIsisSysProtSuppTable 1 }
|
|
|
|
JuniIsisSysProtSuppEntry ::= SEQUENCE {
|
|
juniIsisSysProtSuppSysInstance Integer32,
|
|
juniIsisSysProtSuppProtocol SupportedProtocol,
|
|
juniIsisSysProtSuppRowStatus RowStatus }
|
|
|
|
juniIsisSysProtSuppSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysProtSuppEntry 1 }
|
|
|
|
juniIsisSysProtSuppProtocol OBJECT-TYPE
|
|
SYNTAX SupportedProtocol
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One supported protocol. This object follows the index behaviour."
|
|
::= { juniIsisSysProtSuppEntry 2 }
|
|
|
|
juniIsisSysProtSuppRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the juniIsisSysProtSuppEntry. This object follows the
|
|
RowStatus behavior."
|
|
DEFVAL { active }
|
|
::= { juniIsisSysProtSuppEntry 3 }
|
|
|
|
|
|
--
|
|
-- The Summary Address Table
|
|
--
|
|
-- The Summary Address Table contains the set of summary addresses manually
|
|
-- configured for each instance of IP Integrated ISIS on the system.
|
|
--
|
|
juniIsisSummAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSummAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of IP summary addresses to use in forming the contents of Level
|
|
2 LSPs originated by this level 2 Intermediate System."
|
|
::= { juniIsisSystemGroup 4 }
|
|
|
|
juniIsisSummAddrEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSummAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one IP summary address."
|
|
INDEX { juniIsisSummAddrSysInstance,
|
|
juniIsisSummAddress,
|
|
juniIsisSummAddrMask }
|
|
::= { juniIsisSummAddrTable 1 }
|
|
|
|
JuniIsisSummAddrEntry ::= SEQUENCE {
|
|
juniIsisSummAddrSysInstance Integer32,
|
|
juniIsisSummAddress IpAddress,
|
|
juniIsisSummAddrMask IpAddress,
|
|
juniIsisSummAddrRowStatus RowStatus,
|
|
juniIsisSummAddrOperState OperState,
|
|
juniIsisSummAddrDefaultMetric Integer32,
|
|
juniIsisSummAddrDelayMetric OtherMetric,
|
|
juniIsisSummAddrExpenseMetric OtherMetric,
|
|
juniIsisSummAddrErrorMetric OtherMetric,
|
|
juniIsisSummLevel INTEGER }
|
|
|
|
juniIsisSummAddrSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviours."
|
|
::= { juniIsisSummAddrEntry 1 }
|
|
|
|
juniIsisSummAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address value for this summary address. This object follows the
|
|
index behaviour."
|
|
::= { juniIsisSummAddrEntry 2 }
|
|
|
|
juniIsisSummAddrMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask value for this summary address. This object follows the index
|
|
behaviour."
|
|
::= { juniIsisSummAddrEntry 3 }
|
|
|
|
juniIsisSummAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this summary address. This object follows the
|
|
RowStatus behaviour."
|
|
::= { juniIsisSummAddrEntry 4 }
|
|
|
|
juniIsisSummAddrOperState OBJECT-TYPE
|
|
SYNTAX OperState
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of this entry. This object follows the
|
|
operationalState behaviour. When the operational state changes if this
|
|
would cause the contents of LSPs originated by the system to change then
|
|
those new LSPs must be generated and sent as soon as is permitted by the
|
|
ISIS protocol."
|
|
::= { juniIsisSummAddrEntry 5 }
|
|
|
|
juniIsisSummAddrDefaultMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777214)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The default metric value to announce this summary address with in Level
|
|
1 or 2 LSPs generated by this system. A Metric value of 0 indicates to
|
|
use the lowest metric value amongst the routes being summarized. When
|
|
advertising a metric value into a narrow domain
|
|
(juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to
|
|
juniIsisMetricStyleNarrow) the value will be truncated to 63."
|
|
::= { juniIsisSummAddrEntry 6 }
|
|
|
|
juniIsisSummAddrDelayMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay metric value to announce this summary address with in Level 2
|
|
LSPs generated by this system. The value of zero is reserved to
|
|
indicate that this metric is not supported."
|
|
::= { juniIsisSummAddrEntry 7 }
|
|
|
|
juniIsisSummAddrExpenseMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expense metric value to announce this summary address with in Level
|
|
2 LSPs generated by this system. The value of zero is reserved to
|
|
indicate that this metric is not supported."
|
|
::= { juniIsisSummAddrEntry 8 }
|
|
|
|
juniIsisSummAddrErrorMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error metric value to announce this summary address with in Level n
|
|
LSPs generated by this system. The value of zero is reserved to
|
|
indicate that this metric is not supported."
|
|
::= { juniIsisSummAddrEntry 9 }
|
|
|
|
juniIsisSummLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level1IS(1),
|
|
level2IS(2),
|
|
level1l2IS(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of database at which to annouce this summary."
|
|
::= { juniIsisSummAddrEntry 10 }
|
|
|
|
--
|
|
-- The Circuit Group
|
|
--
|
|
-- The Circuit Group is current
|
|
--
|
|
-- The Circuit Table
|
|
-- Each broadcast or point-to-point interface on the system corresponds to one
|
|
-- entry in the Circuit table.
|
|
--
|
|
juniIsisCircTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisCircEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of circuits used by each instance of Integrated IS-IS on this
|
|
system."
|
|
::= { juniIsisCircuitGroup 1 }
|
|
|
|
juniIsisCircEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisCircEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An juniIsisCircEntry exists for each circuit used by Integrated IS-IS
|
|
on this system."
|
|
INDEX { juniIsisCircSysInstance,
|
|
juniIsisCircIfIndex }
|
|
::= { juniIsisCircTable 1 }
|
|
|
|
JuniIsisCircEntry ::= SEQUENCE {
|
|
juniIsisCircSysInstance Integer32,
|
|
juniIsisCircIfIndex Integer32,
|
|
juniIsisCircLocalID Integer32,
|
|
juniIsisCircOperState OperState,
|
|
juniIsisCircRowStatus RowStatus,
|
|
juniIsisCircType INTEGER,
|
|
juniIsisCircL1DefaultMetric JuniDefaultMetric,
|
|
juniIsisCircL1DelayMetric OtherMetric,
|
|
juniIsisCircL1ExpenseMetric OtherMetric,
|
|
juniIsisCircL1ErrorMetric OtherMetric,
|
|
juniIsisCircExtDomain TruthValue,
|
|
juniIsisCircAdjChanges Counter32,
|
|
juniIsisCircInitFails Counter32,
|
|
juniIsisCircRejAdjs Counter32,
|
|
juniIsisCircOutCtrlPDUs Counter32,
|
|
juniIsisCircInCtrlPDUs Counter32,
|
|
juniIsisCircIDFieldLenMismatches Counter32,
|
|
juniIsisCircL2DefaultMetric JuniDefaultMetric,
|
|
juniIsisCircL2DelayMetric OtherMetric,
|
|
juniIsisCircL2ExpenseMetric OtherMetric,
|
|
juniIsisCircL2ErrorMetric OtherMetric,
|
|
juniIsisCircManL2Only TruthValue,
|
|
juniIsisCircL1ISPriority ISPriority,
|
|
juniIsisCircL1CircID CircuitID,
|
|
juniIsisCircL1DesIS SystemID,
|
|
juniIsisCircLANL1DesISChanges Counter32,
|
|
juniIsisCircL2ISPriority ISPriority,
|
|
juniIsisCircL2CircID CircuitID,
|
|
juniIsisCircL2DesIS SystemID,
|
|
juniIsisCircLANL2DesISChanges Counter32,
|
|
juniIsisCircMCAddr INTEGER,
|
|
juniIsisCircPtToPtCircID CircuitID,
|
|
juniIsisCircL1HelloTimer Integer32,
|
|
juniIsisCircL2HelloTimer Integer32,
|
|
juniIsisCircL1HelloMultiplier Integer32,
|
|
juniIsisCircL2HelloMultiplier Integer32,
|
|
juniIsisCircMinLSPTransInt Unsigned32,
|
|
juniIsisCircMinLSPReTransInt Integer32,
|
|
juniIsisCircL1CSNPInterval Integer32,
|
|
juniIsisCircL2CSNPInterval Integer32,
|
|
juniIsisCircLSPThrottle Integer32,
|
|
juniIsisCircMeshGroupEnabled INTEGER,
|
|
juniIsisCircMeshGroup Unsigned32,
|
|
juniIsisCircLevel INTEGER,
|
|
juniIsisCircState INTEGER }
|
|
|
|
juniIsisCircSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisCircEntry 1 }
|
|
|
|
juniIsisCircIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this circuit
|
|
corresponds."
|
|
::= { juniIsisCircEntry 2 }
|
|
|
|
juniIsisCircLocalID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identification that can be used in protocol packets to identify a
|
|
circuit. Implementations may devise ways to assure that this value is
|
|
suitable for the circuit it is used on. LAN packets only have space for
|
|
8 bits.
|
|
|
|
Values of juniIsisCircLocalID do not need to be unique. They are only
|
|
required to differ on LANs where the Intermediate System is the
|
|
Designated Intermediate System."
|
|
::= { juniIsisCircEntry 3 }
|
|
|
|
juniIsisCircOperState OBJECT-TYPE
|
|
SYNTAX OperState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the circuit. This object follows the
|
|
operationalState behaviour."
|
|
DEFVAL { off }
|
|
::= { juniIsisCircEntry 4 }
|
|
|
|
juniIsisCircRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this circuit. This object follows the RowStatus
|
|
behaviour."
|
|
DEFVAL { active }
|
|
::= { juniIsisCircEntry 5 }
|
|
|
|
juniIsisCircType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
broadcast(1),
|
|
ptToPt(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the circuit. This object follows the
|
|
replaceOnlyWhileDisabled behaviour. The type specified must be
|
|
compatible with the type of the interface defined by the value of
|
|
juniIsisCircIfIndex."
|
|
REFERENCE
|
|
"ISIS.aoi type (33)"
|
|
::= { juniIsisCircEntry 6 }
|
|
|
|
juniIsisCircL1DefaultMetric OBJECT-TYPE
|
|
SYNTAX JuniDefaultMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default metric value of this circuit for Level 1 traffic."
|
|
REFERENCE
|
|
"ISIS.aoi l1DefaultMetric (35)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 7 }
|
|
|
|
juniIsisCircL1DelayMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay metric value of this circuit for Level 1 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l1DelayMetric (36)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 8 }
|
|
|
|
juniIsisCircL1ExpenseMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expense metric value of this circuit for Level 1 traffic. The
|
|
value of zero is reserved to indicate that this metric is not
|
|
supported."
|
|
REFERENCE
|
|
"ISIS.aoi l1ExpenseMetric (37)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 9 }
|
|
|
|
juniIsisCircL1ErrorMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error metric value of this circuit for Level 1 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l1ErrorMetric (38)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 10 }
|
|
|
|
juniIsisCircExtDomain OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, suppress normal transmission of and interpretation of
|
|
Intra-domain ISIS PDUs on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi externalDomain (46)"
|
|
DEFVAL { false }
|
|
::= { juniIsisCircEntry 11 }
|
|
|
|
juniIsisCircAdjChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an adjacency state change has occurred on this
|
|
circuit."
|
|
REFERENCE
|
|
"ISIS.aoi changesInAdjacencyState (40)"
|
|
::= { juniIsisCircEntry 12 }
|
|
|
|
juniIsisCircInitFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times initialization of this circuit has failed."
|
|
REFERENCE
|
|
"ISIS.aoi initializationFailures (41)"
|
|
::= { juniIsisCircEntry 13 }
|
|
|
|
juniIsisCircRejAdjs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an adjacency has been rejected on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi rejectedAdjacencies (42)"
|
|
::= { juniIsisCircEntry 14 }
|
|
|
|
juniIsisCircOutCtrlPDUs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS control PDUs sent on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi iSISControlPDUsSent (43)"
|
|
::= { juniIsisCircEntry 15 }
|
|
|
|
juniIsisCircInCtrlPDUs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS control PDUs received on this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi controlPDUsReceived (44)"
|
|
::= { juniIsisCircEntry 16 }
|
|
|
|
juniIsisCircIDFieldLenMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an IS-IS control PDU with an ID field length
|
|
different to that for this system has been received."
|
|
REFERENCE
|
|
"ISIS.aoi iDFieldLengthMismatches (25)"
|
|
::= { juniIsisCircEntry 17 }
|
|
|
|
|
|
--
|
|
-- The following objects map those from the linkageISISLevel2-P package
|
|
--
|
|
juniIsisCircL2DefaultMetric OBJECT-TYPE
|
|
SYNTAX JuniDefaultMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default metric value of this circuit for level 2 traffic."
|
|
REFERENCE
|
|
"ISIS.aoi l2DefaultMetric (68)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 18 }
|
|
|
|
juniIsisCircL2DelayMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay metric value of this circuit for level 2 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l2DelayMetric (69)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 19 }
|
|
|
|
juniIsisCircL2ExpenseMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expense metric value of this circuit for level 2 traffic. The
|
|
value of zero is reserved to indicate that this metric is not
|
|
supported."
|
|
REFERENCE
|
|
"ISIS.aoi l2ExpenseMetric (70)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 20 }
|
|
|
|
juniIsisCircL2ErrorMetric OBJECT-TYPE
|
|
SYNTAX OtherMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The error metric value of this circuit for level 2 traffic. The value
|
|
of zero is reserved to indicate that this metric is not supported."
|
|
REFERENCE
|
|
"ISIS.aoi l2ErrorMetric (71)"
|
|
DEFVAL { 0 }
|
|
::= { juniIsisCircEntry 21 }
|
|
|
|
juniIsisCircManL2Only OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When true, indicates that this circuit is to be used only for level 2.
|
|
This object follows the replaceOnlyWhileDisabled behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi manualL2OnlyMode (72)"
|
|
DEFVAL { false }
|
|
::= { juniIsisCircEntry 22 }
|
|
|
|
|
|
--
|
|
-- The following objects map those from the linkageISISBroadcast-P package
|
|
--
|
|
juniIsisCircL1ISPriority OBJECT-TYPE
|
|
SYNTAX ISPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for becoming LAN Level 1 Deignated Intermediate System on
|
|
a broadcast circuit."
|
|
REFERENCE
|
|
"ISIS.aoi l1IntermediateSystemPriority (47)"
|
|
DEFVAL { 64 }
|
|
::= { juniIsisCircEntry 23 }
|
|
|
|
juniIsisCircL1CircID OBJECT-TYPE
|
|
SYNTAX CircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAN ID allocated by the LAN Level 1 Designated Intermediate System.
|
|
Where this system is not aware of the value (because it is not
|
|
participating in the Level 1 Designated Intermediate System election),
|
|
this object has the value which would be proposed for this circuit (i.e.
|
|
the concatenation of the local system ID and the one octet local Circuit
|
|
ID for this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi l1CircuitID (48)"
|
|
::= { juniIsisCircEntry 24 }
|
|
|
|
juniIsisCircL1DesIS OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the LAN Level 1 Designated Intermediate System on this
|
|
circuit. If, for any reason this system is not partaking in the
|
|
relevant Designated Intermediate System election process, then the value
|
|
returned is the zero length OCTET STRING."
|
|
REFERENCE
|
|
"ISIS.aoi l1DesignatedIntermediateSystem (49)"
|
|
::= { juniIsisCircEntry 25 }
|
|
|
|
juniIsisCircLANL1DesISChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the LAN Level 1 Designated Intermediate System has
|
|
changed."
|
|
REFERENCE
|
|
"ISIS.aoi lanL1DesignatedIntermediateSystemChanges (50)"
|
|
::= { juniIsisCircEntry 26 }
|
|
|
|
-- The following objects map those from the linkageISISLevel2Broadcast-P package
|
|
|
|
juniIsisCircL2ISPriority OBJECT-TYPE
|
|
SYNTAX ISPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for becoming LAN level 2 Designated Intermediate System."
|
|
REFERENCE
|
|
"ISIS.aoi l2IntermediateSystemPriority (73)"
|
|
DEFVAL { 64 }
|
|
::= { juniIsisCircEntry 27 }
|
|
|
|
juniIsisCircL2CircID OBJECT-TYPE
|
|
SYNTAX CircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAN ID allocated by the LAN Level 2 Designated Intermediate System.
|
|
Where this system is not aware of this value (because it is not
|
|
participating in the Level 2 Designated Intermediate System election),
|
|
this object has the value which would be proposed for this circuit
|
|
(i.e. the concatenation of the local system ID and the one octet local
|
|
Circuit ID for this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi l2CircuitID (74)"
|
|
::= { juniIsisCircEntry 28 }
|
|
|
|
juniIsisCircL2DesIS OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the LAN Level 2 Designated Intermediate System on this
|
|
circuit. If, for any reason, this system is not partaking in the
|
|
relevant Designated Intermediate System election process, then the value
|
|
returned is the zero length OCTET STRING."
|
|
REFERENCE
|
|
"ISIS.aoi l2DesignatedIntermediateSystem (75)"
|
|
::= { juniIsisCircEntry 29 }
|
|
|
|
juniIsisCircLANL2DesISChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the LAN Level 2 Designated Intermediate System has
|
|
changed."
|
|
REFERENCE
|
|
"ISIS.aoi lanL2DesignatedIntermediateSystemChanges (76)"
|
|
::= { juniIsisCircEntry 30 }
|
|
|
|
juniIsisCircMCAddr OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
group(1),
|
|
functional(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which type of multicast address will be used for sending
|
|
HELLO PDUs on this circuit."
|
|
DEFVAL { group }
|
|
::= { juniIsisCircEntry 31 }
|
|
|
|
juniIsisCircPtToPtCircID OBJECT-TYPE
|
|
SYNTAX CircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the circuit allocated during initialization. If no value has
|
|
been negotiated (either because the adjacency is to an End System, or
|
|
because initialization has not yet successfully completed), this object
|
|
has the value which would be proposed for this circuit (i.e. the
|
|
concatenation of the local system ID and the one octet local Circuit ID
|
|
for this circuit."
|
|
REFERENCE
|
|
"ISIS.aoi ptPtCircuitID (51)"
|
|
::= { juniIsisCircEntry 32 }
|
|
|
|
juniIsisCircL1HelloTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
|
|
networks. It is also used as the period between Hellos on point to
|
|
point circuits. This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 33 }
|
|
|
|
juniIsisCircL2HelloTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
|
|
networks. This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 34 }
|
|
|
|
juniIsisCircL1HelloMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (3..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is multiplied by the corresponding HelloTimer and the result
|
|
in seconds (rounded up) is used as the holding time in transmitted
|
|
hellos, to be used by receivers of hello packets from this IS."
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 3 }
|
|
::= { juniIsisCircEntry 35 }
|
|
|
|
juniIsisCircL2HelloMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (3..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is multiplied by the corresponding HelloTimer and the result
|
|
in seconds (rounded up) is used as the holding time in transmitted
|
|
hellos, to be used by receivers of hello packets from this IS"
|
|
REFERENCE
|
|
"ISIS.aoi iSISHelloTimer (45)"
|
|
DEFVAL { 3 }
|
|
::= { juniIsisCircEntry 36 }
|
|
|
|
juniIsisCircMinLSPTransInt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in milliseconds, between transmission of LSPs on a
|
|
circuit. This object follows the resettingTimer behaviour. This timer
|
|
shall be capable of a resolution not coarser than 10 milliseconds."
|
|
REFERENCE
|
|
"ISIS.aoi minimumBroadcastLSPTransmissionInterval (7)"
|
|
DEFVAL { 33 }
|
|
::= { juniIsisCircEntry 37 }
|
|
|
|
juniIsisCircMinLSPReTransInt OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between re-transmission of an Level 1 or
|
|
2 LSP. This object follows the resettingTimer behaviour."
|
|
REFERENCE
|
|
"ISIS.aoi minimumLSPTransmissionInterval (5)"
|
|
DEFVAL { 5 }
|
|
::= { juniIsisCircEntry 38 }
|
|
|
|
juniIsisCircL1CSNPInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of time, in seconds, between transmission of Level 1 CSNPs on
|
|
multiaccess networks if this router is the designated router. On
|
|
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
|
|
interval will be 0 for point-to-point networks."
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 39 }
|
|
|
|
juniIsisCircL2CSNPInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of time, in seconds, between transmission of Level 2 CSNPs on
|
|
multiaccess networks if this router is the designated router. On
|
|
point-to-point networks the default is to not transmit CSNPs. Hence CSNP
|
|
interval will be 0 for point-to-point networks."
|
|
DEFVAL { 10 }
|
|
::= { juniIsisCircEntry 40 }
|
|
|
|
juniIsisCircLSPThrottle OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimal interval of time, in milliseconds, between retransmissions of
|
|
LSPs on a point to point interface."
|
|
DEFVAL { 33 }
|
|
::= { juniIsisCircEntry 41 }
|
|
|
|
juniIsisCircMeshGroupEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
blocked(2),
|
|
set(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this port a member of a mesh group, or blocked? Circuits in the
|
|
same mesh group act as a virtual multiaccess network. LSPs seen on one
|
|
circuit in a mesh group will not be flooded to another circuit in the
|
|
same mesh group."
|
|
DEFVAL { inactive }
|
|
::= { juniIsisCircEntry 42 }
|
|
|
|
juniIsisCircMeshGroup OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuits in the same mesh group act as a virtual multiaccess network.
|
|
LSPs seen on one circuit in a mesh group will not be flooded to another
|
|
circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is
|
|
false, this value is ignored. Default value returned as 0 has no significance
|
|
for this variable."
|
|
::= { juniIsisCircEntry 43 }
|
|
|
|
juniIsisCircLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
level1IS(0),
|
|
level1l2IS(1),
|
|
level2Only(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this circuit. This object follows the
|
|
replaceOnlyWhileDisabled behavior."
|
|
REFERENCE
|
|
"ISIS.aoi iSType(2)"
|
|
::= { juniIsisCircEntry 44 }
|
|
|
|
juniIsisCircState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isisCircuitDown(1),
|
|
isisCircuitUp(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational state of the circuit."
|
|
::= { juniIsisCircEntry 45 }
|
|
|
|
|
|
juniIsisCircBFDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisCircBFDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Juniper ISIS circuit table describes the BFD-specific
|
|
characteristics of interfaces."
|
|
::= { juniIsisCircuitGroup 4 }
|
|
|
|
juniIsisCircBFDEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisCircBFDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Juniper ISIS circuit table describes the BFD-specific
|
|
characteristics of one interface."
|
|
AUGMENTS { juniIsisCircEntry }
|
|
::= { juniIsisCircBFDTable 1 }
|
|
|
|
JuniIsisCircBFDEntry ::= SEQUENCE {
|
|
juniIsisCircBfdEnable TruthValue,
|
|
juniIsisCircBfdMinRxInterval Integer32,
|
|
juniIsisCircBfdMinTxInterval Integer32,
|
|
juniIsisCircBfdMultiplier Integer32
|
|
}
|
|
|
|
juniIsisCircBfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether BFD session on the interface is active or not"
|
|
DEFVAL { false }
|
|
::= { juniIsisCircBFDEntry 1 }
|
|
|
|
juniIsisCircBfdMinRxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies upper-limit on rate local-system requires remote-system to
|
|
transmit bfd control-packets [milliseconds]"
|
|
DEFVAL { 300 }
|
|
::= { juniIsisCircBFDEntry 2 }
|
|
|
|
juniIsisCircBfdMinTxInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (100..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies lower-limit on rate local-system requires remote-system to
|
|
transmit bfd control-packets [milliseconds]"
|
|
DEFVAL { 300 }
|
|
::= { juniIsisCircBFDEntry 3 }
|
|
|
|
juniIsisCircBfdMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable specifies detection-multiplier "
|
|
DEFVAL { 3 }
|
|
::= { juniIsisCircBFDEntry 4 }
|
|
--
|
|
-- The System Host Name Table
|
|
--
|
|
-- The System Host Name Table contains a manually configured set of host to
|
|
-- system ID aliases supported by each instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysHostNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysHostNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of host name to system
|
|
ID aliases supported by each instance of the Integrated ISIS protocol."
|
|
::= { juniIsisSystemGroup 5 }
|
|
|
|
juniIsisSysHostNameEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysHostNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one name to system ID alias supported by an
|
|
instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysHostNameSysInstance,
|
|
juniIsisSysHostNameSysId }
|
|
::= { juniIsisSysHostNameTable 1 }
|
|
|
|
JuniIsisSysHostNameEntry ::= SEQUENCE {
|
|
juniIsisSysHostNameSysInstance Integer32,
|
|
juniIsisSysHostNameSysId SystemID,
|
|
juniIsisSysHostNameAreaAddr OSINSAddress,
|
|
juniIsisSysHostNameName OCTET STRING,
|
|
juniIsisSysHostNameType INTEGER,
|
|
juniIsisSysHostNameRowStatus RowStatus }
|
|
|
|
juniIsisSysHostNameSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysHostNameEntry 1 }
|
|
|
|
juniIsisSysHostNameSysId OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for the system which this name will be assigned."
|
|
::= { juniIsisSysHostNameEntry 2 }
|
|
|
|
juniIsisSysHostNameAreaAddr OBJECT-TYPE
|
|
SYNTAX OSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A configured area address for the system which this name will be
|
|
assigned. This object follows the index behaviour.
|
|
|
|
Note: an index for the entry {1, {49.0001} active} in this table would
|
|
be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an
|
|
Octet string is part of the OID."
|
|
::= { juniIsisSysHostNameEntry 3 }
|
|
|
|
juniIsisSysHostNameName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string to use when displaying system data with this system ID."
|
|
::= { juniIsisSysHostNameEntry 4 }
|
|
|
|
juniIsisSysHostNameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hostNameTypeStatic(1),
|
|
hostNameTypeDynamic(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of host name entry."
|
|
::= { juniIsisSysHostNameEntry 5 }
|
|
|
|
juniIsisSysHostNameRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this host name entry. This object follows the RowStatus
|
|
behaviour."
|
|
::= { juniIsisSysHostNameEntry 6 }
|
|
|
|
|
|
--
|
|
-- The Area Authentication Table
|
|
--
|
|
-- The Area Authentication Table contains the manually configured set of
|
|
-- authentication keys used to authenticate Level 1 LSPs and SNPs in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysAreaAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysAreaAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of area authentication
|
|
keys supported by each instance of the Integrated ISIS protocol."
|
|
::= { juniIsisSystemGroup 6 }
|
|
|
|
juniIsisSysAreaAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysAreaAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one area authentication key supported by an
|
|
instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysAreaAuthenticationSysInstance,
|
|
juniIsisSysAreaAuthenticationKeyId }
|
|
::= { juniIsisSysAreaAuthenticationTable 1 }
|
|
|
|
JuniIsisSysAreaAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysAreaAuthenticationSysInstance Integer32,
|
|
juniIsisSysAreaAuthenticationKeyId Integer32,
|
|
juniIsisSysAreaAuthenticationPwd OCTET STRING,
|
|
juniIsisSysAreaAuthenticationKeyType INTEGER,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysAreaAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysAreaAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysAreaAuthenticationEntry 1 }
|
|
|
|
juniIsisSysAreaAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysAreaAuthenticationEntry 2 }
|
|
|
|
juniIsisSysAreaAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 1 Link State
|
|
Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a
|
|
value of plaintext or hmacMd5. A modification of
|
|
juniIsisSysAreaAuthenticationKeyType does not modify the
|
|
juniIsisSysAreaAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysAreaAuthenticationEntry 3 }
|
|
|
|
juniIsisSysAreaAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 1 Link
|
|
State packets and sequence number packets"
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysAreaAuthenticationEntry 4 }
|
|
|
|
juniIsisSysAreaAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 1 LSPs and SNPs received. The Default value the start
|
|
accept time will be the current time when the key was created"
|
|
::= { juniIsisSysAreaAuthenticationEntry 5 }
|
|
|
|
juniIsisSysAreaAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 1 LSPs and SNPs transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes"
|
|
::= { juniIsisSysAreaAuthenticationEntry 6 }
|
|
|
|
juniIsisSysAreaAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 1 LSP and SNP key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysAreaAuthenticationEntry 7 }
|
|
|
|
juniIsisSysAreaAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 1 LSPs and SNPs transmitted. A value of zero
|
|
indicates the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysAreaAuthenticationEntry 8 }
|
|
|
|
juniIsisSysAreaAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
::= { juniIsisSysAreaAuthenticationEntry 9 }
|
|
|
|
-- The Domain Authentication Table
|
|
|
|
-- The Domain Authentication Table contains the manually configured set of
|
|
-- authentication keys used to authenticate Level 2 LSPs and SNPs in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysDomainAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysDomainAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of domain
|
|
authentication keys supported by each instance of the Integrated ISIS
|
|
protocol."
|
|
::= { juniIsisSystemGroup 7 }
|
|
|
|
juniIsisSysDomainAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysDomainAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one domain authentication key supported by an
|
|
instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysDomainAuthenticationSysInstance,
|
|
juniIsisSysDomainAuthenticationKeyId }
|
|
::= { juniIsisSysDomainAuthenticationTable 1 }
|
|
|
|
JuniIsisSysDomainAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysDomainAuthenticationSysInstance Integer32,
|
|
juniIsisSysDomainAuthenticationKeyId Integer32,
|
|
juniIsisSysDomainAuthenticationPwd OCTET STRING,
|
|
juniIsisSysDomainAuthenticationKeyType INTEGER,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysDomainAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysDomainAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysDomainAuthenticationEntry 1 }
|
|
|
|
juniIsisSysDomainAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysDomainAuthenticationEntry 2 }
|
|
|
|
juniIsisSysDomainAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 2 Link State
|
|
Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has
|
|
a value of plaintext or hmacMd5. A modification of
|
|
juniIsisSysDomainAuthenticationKeyType does not modify the
|
|
juniIsisSysDomainAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysDomainAuthenticationEntry 3 }
|
|
|
|
juniIsisSysDomainAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 2 Link
|
|
State packets and Sequence Number packets"
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysDomainAuthenticationEntry 4 }
|
|
|
|
juniIsisSysDomainAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 2 LSPs and SNPs received. The Default value the start
|
|
accept time will be the current time when the key was created"
|
|
::= { juniIsisSysDomainAuthenticationEntry 5 }
|
|
|
|
juniIsisSysDomainAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 2 LSPs and SNPs transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes"
|
|
::= { juniIsisSysDomainAuthenticationEntry 6 }
|
|
|
|
juniIsisSysDomainAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 2 LSP and SNP key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysDomainAuthenticationEntry 7 }
|
|
|
|
juniIsisSysDomainAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 2 LSPs and SNPs transmitted. A value of zero
|
|
indicates the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysDomainAuthenticationEntry 8 }
|
|
|
|
juniIsisSysDomainAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
::= { juniIsisSysDomainAuthenticationEntry 9 }
|
|
|
|
|
|
--
|
|
-- The Level 1 Circuit Authentication Table
|
|
--
|
|
-- The Level 1 Circuit Authentication Table contains the manually configured
|
|
-- set of authentication keys used to authenticate Level 1 hello packets in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysL1CircAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysL1CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of Level 1 Circuit
|
|
authentication keys supported by each instance of the Integrated ISIS
|
|
protocol."
|
|
::= { juniIsisCircuitGroup 2 }
|
|
|
|
juniIsisSysL1CircAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysL1CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one Level 1 circuit authentication key supported by
|
|
an instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysL1CircAuthenticationSysInstance,
|
|
juniIsisSysL1CircAuthenticationIfIndex,
|
|
juniIsisSysL1CircAuthenticationKeyId }
|
|
::= { juniIsisSysL1CircAuthenticationTable 1 }
|
|
|
|
JuniIsisSysL1CircAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysL1CircAuthenticationSysInstance Integer32,
|
|
juniIsisSysL1CircAuthenticationIfIndex Integer32,
|
|
juniIsisSysL1CircAuthenticationKeyId Integer32,
|
|
juniIsisSysL1CircAuthenticationPwd OCTET STRING,
|
|
juniIsisSysL1CircAuthenticationKeyType INTEGER,
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysL1CircAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysL1CircAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 1 }
|
|
|
|
juniIsisSysL1CircAuthenticationIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this circuit
|
|
corresponds."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 2 }
|
|
|
|
juniIsisSysL1CircAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 3 }
|
|
|
|
juniIsisSysL1CircAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 1 Hello Packets
|
|
whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value
|
|
of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType
|
|
does not modify the juniIsisSysL1CircAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 4 }
|
|
|
|
juniIsisSysL1CircAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 1 hello
|
|
packets."
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 5 }
|
|
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 1 IIH packets received. The Default value the start
|
|
accept time will be the current time when the key was created."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 6 }
|
|
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 1 IIH packets transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 7 }
|
|
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 1 IIH packets key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 8 }
|
|
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 1 IIH packets transmitted. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL1CircAuthenticationEntry 9 }
|
|
|
|
juniIsisSysL1CircAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
::= { juniIsisSysL1CircAuthenticationEntry 10 }
|
|
|
|
|
|
--
|
|
-- The Level 2 Circuit Authentication Table
|
|
--
|
|
-- The Level 2 Circuit Authentication Table contains the manually configured set
|
|
-- of authentication keys used to authenticate Level 2 hello packets in each
|
|
-- instance of the Integrated ISIS protocol.
|
|
--
|
|
juniIsisSysL2CircAuthenticationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisSysL2CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the manually configured set of Level 2 Circuit
|
|
authentication keys supported by each instance of the Integrated ISIS
|
|
protocol."
|
|
::= { juniIsisCircuitGroup 3 }
|
|
|
|
juniIsisSysL2CircAuthenticationEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisSysL2CircAuthenticationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one Level 2 circuit authentication key supported by
|
|
an instance of the Integrated ISIS protocol."
|
|
INDEX { juniIsisSysL2CircAuthenticationSysInstance,
|
|
juniIsisSysL2CircAuthenticationIfIndex,
|
|
juniIsisSysL2CircAuthenticationKeyId }
|
|
::= { juniIsisSysL2CircAuthenticationTable 1 }
|
|
|
|
JuniIsisSysL2CircAuthenticationEntry ::= SEQUENCE {
|
|
juniIsisSysL2CircAuthenticationSysInstance Integer32,
|
|
juniIsisSysL2CircAuthenticationIfIndex Integer32,
|
|
juniIsisSysL2CircAuthenticationKeyId Integer32,
|
|
juniIsisSysL2CircAuthenticationPwd OCTET STRING,
|
|
juniIsisSysL2CircAuthenticationKeyType INTEGER,
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime AuthTime,
|
|
juniIsisSysL2CircAuthenticationRowStatus RowStatus }
|
|
|
|
juniIsisSysL2CircAuthenticationSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 1 }
|
|
|
|
juniIsisSysL2CircAuthenticationIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this circuit
|
|
corresponds."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 2 }
|
|
|
|
juniIsisSysL2CircAuthenticationKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the instance to which this row corresponds.
|
|
This object follows the index behaviour."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 3 }
|
|
juniIsisSysL2CircAuthenticationPwd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the Authentication Key in Level 2 Hello Packets
|
|
whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value
|
|
of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType
|
|
does not modify the juniIsisSysL2CircAuthenticationPwd value.
|
|
|
|
Reading this object always results in an OCTET STRING of length zero;
|
|
authentication may not be bypassed by reading the MIB object."
|
|
DEFVAL { "" }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 4 }
|
|
|
|
juniIsisSysL2CircAuthenticationKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
plaintext(1),
|
|
hmacMd5(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What authentication scheme, if any, is used to protect Level 2 hello
|
|
packets."
|
|
DEFVAL { hmacMd5 }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 5 }
|
|
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
validate level 2 IIH packets received. The Default value the start
|
|
accept time will be the current time when the key was created."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 6 }
|
|
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will start to be used to
|
|
authenticate level 2 IIH packets transmitted. The Default value the
|
|
start accept time will be the current time when the key was created + 2
|
|
minutes."
|
|
::= { juniIsisSysL2CircAuthenticationEntry 7 }
|
|
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being accepted
|
|
as a valid level 2 IIH packets key received. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 8 }
|
|
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime OBJECT-TYPE
|
|
SYNTAX AuthTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this authentication key will stop being used to
|
|
authenticate level 2 IIH packets transmitted. A value of zero indicates
|
|
the key will never stop being used to authenticate packets."
|
|
DEFVAL { 0 }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 9 }
|
|
|
|
juniIsisSysL2CircAuthenticationRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this authentication key. This object follows
|
|
the RowStatus behaviour."
|
|
DEFVAL { active }
|
|
::= { juniIsisSysL2CircAuthenticationEntry 10 }
|
|
|
|
--
|
|
-- The MPLS TE tunnel table contains the set of tunnels exported by MPLS into
|
|
-- ISIS.
|
|
|
|
juniIsisMplsTeTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniIsisMplsTeTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of tunnels imported from MPLS."
|
|
REFERENCE
|
|
"ISIS.aoi mplsTeTunnels(6)"
|
|
::= { juniIsisSystemGroup 8 }
|
|
|
|
juniIsisMplsTeTunnelEntry OBJECT-TYPE
|
|
SYNTAX JuniIsisMplsTeTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains metric details of an MPLS LSP"
|
|
INDEX { juniIsisMplsTeTunnelSysInstance,
|
|
juniIsisMplsNextHopIndex }
|
|
::= { juniIsisMplsTeTunnelTable 1 }
|
|
|
|
JuniIsisMplsTeTunnelEntry ::= SEQUENCE {
|
|
juniIsisMplsTeTunnelSysInstance Integer32,
|
|
juniIsisMplsNextHopIndex Integer32,
|
|
juniIsisMplsTeSystemId SystemID,
|
|
juniIsisMplsTeRouterId IpAddress,
|
|
juniIsisMplsTeTunnelMetric Integer32,
|
|
juniIsisMplsTeTunnelRelMetric Integer32,
|
|
juniIsisMplsTeTunnelName OCTET STRING
|
|
}
|
|
|
|
|
|
juniIsisMplsTeTunnelSysInstance OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier of the Integrated IS-IS instance to which this
|
|
row corresponds. This object follows the index behaviour."
|
|
::= { juniIsisMplsTeTunnelEntry 1 }
|
|
|
|
juniIsisMplsNextHopIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to uniquely identify the tunnels."
|
|
::= { juniIsisMplsTeTunnelEntry 2 }
|
|
|
|
juniIsisMplsTeSystemId OBJECT-TYPE
|
|
SYNTAX SystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for the instance of the Integrated IS-IS protocol
|
|
running in the tunnel's end point."
|
|
::= { juniIsisMplsTeTunnelEntry 3 }
|
|
|
|
juniIsisMplsTeRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router ID of the tunnel's end point."
|
|
::= { juniIsisMplsTeTunnelEntry 4 }
|
|
|
|
juniIsisMplsTeTunnelMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric associated with the tunnel."
|
|
::= { juniIsisMplsTeTunnelEntry 5 }
|
|
|
|
juniIsisMplsTeTunnelRelMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric associated with the tunnel relative to the spf path."
|
|
::= { juniIsisMplsTeTunnelEntry 6 }
|
|
|
|
juniIsisMplsTeTunnelName OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE (1..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name associated with the tunnel."
|
|
::= { juniIsisMplsTeTunnelEntry 7 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniIsisCompliances OBJECT IDENTIFIER ::= { juniIsisConformance 1 }
|
|
juniIsisMIBGroups OBJECT IDENTIFIER ::= { juniIsisConformance 2 }
|
|
|
|
--
|
|
-- Compliance Statements
|
|
--
|
|
juniIsisCompliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for systems supporting ISIS
|
|
functionality. This statement became obsolete when the
|
|
juniIsisCircState object was added."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup,
|
|
juniIsisCircuitMgmtGroup }
|
|
::= { juniIsisCompliances 1 } -- JUNOSe 2.0
|
|
|
|
juniIsisCompliance2 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for systems supporting ISIS
|
|
functionality. This statement became obsolete when MPSL support was
|
|
added."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup,
|
|
juniIsisCircuitMgmtGroup2 }
|
|
::= { juniIsisCompliances 2 } -- JUNOSe 3.0
|
|
|
|
juniIsisCompliance3 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality. This
|
|
statement became obsolete when juniIsisCircBFDTable is implemented."
|
|
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup2,
|
|
juniIsisCircuitMgmtGroup2 }
|
|
::= { juniIsisCompliances 3 } -- JUNOSe 4.0
|
|
|
|
juniIsisCompliance4 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup2,
|
|
juniIsisCircuitMgmtGroup2,
|
|
juniIsisCircBFDGroup }
|
|
::= { juniIsisCompliances 4 }
|
|
juniIsisCompliance5 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup3,
|
|
juniIsisCircuitMgmtGroup2,
|
|
juniIsisCircBFDGroup }
|
|
::= { juniIsisCompliances 5 }
|
|
|
|
juniIsisCompliance6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for systems supporting ISIS functionality."
|
|
MODULE -- juniIsisMIB
|
|
MANDATORY-GROUPS {
|
|
juniIsisSystemMgmtGroup4,
|
|
juniIsisCircuitMgmtGroup2,
|
|
juniIsisCircBFDGroup }
|
|
::= { juniIsisCompliances 6 }
|
|
|
|
--
|
|
-- Units of Conformance
|
|
--
|
|
juniIsisSystemMgmtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete system level objects for ISIS management functionality. This
|
|
group became obsolete when the MPLS management objects were added."
|
|
::= { juniIsisMIBGroups 1 }
|
|
|
|
juniIsisCircuitMgmtGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisCircLocalID,
|
|
juniIsisCircOperState,
|
|
juniIsisCircRowStatus,
|
|
juniIsisCircType,
|
|
juniIsisCircL1DefaultMetric,
|
|
juniIsisCircL1DelayMetric,
|
|
juniIsisCircL1ExpenseMetric,
|
|
juniIsisCircL1ErrorMetric,
|
|
juniIsisCircExtDomain,
|
|
juniIsisCircAdjChanges,
|
|
juniIsisCircInitFails,
|
|
juniIsisCircRejAdjs,
|
|
juniIsisCircOutCtrlPDUs,
|
|
juniIsisCircInCtrlPDUs,
|
|
juniIsisCircIDFieldLenMismatches,
|
|
juniIsisCircL2DefaultMetric,
|
|
juniIsisCircL2DelayMetric,
|
|
juniIsisCircL2ExpenseMetric,
|
|
juniIsisCircL2ErrorMetric,
|
|
juniIsisCircManL2Only,
|
|
juniIsisCircL1ISPriority,
|
|
juniIsisCircL1CircID,
|
|
juniIsisCircL1DesIS,
|
|
juniIsisCircLANL1DesISChanges,
|
|
juniIsisCircL2ISPriority,
|
|
juniIsisCircL2CircID,
|
|
juniIsisCircL2DesIS,
|
|
juniIsisCircLANL2DesISChanges,
|
|
juniIsisCircMCAddr,
|
|
juniIsisCircPtToPtCircID,
|
|
juniIsisCircL1HelloTimer,
|
|
juniIsisCircL2HelloTimer,
|
|
juniIsisCircL1HelloMultiplier,
|
|
juniIsisCircL2HelloMultiplier,
|
|
juniIsisCircMinLSPTransInt,
|
|
juniIsisCircMinLSPReTransInt,
|
|
juniIsisCircL1CSNPInterval,
|
|
juniIsisCircL2CSNPInterval,
|
|
juniIsisCircLSPThrottle,
|
|
juniIsisCircMeshGroupEnabled,
|
|
juniIsisCircMeshGroup,
|
|
juniIsisCircLevel,
|
|
juniIsisSysL1CircAuthenticationPwd,
|
|
juniIsisSysL1CircAuthenticationKeyType,
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL1CircAuthenticationRowStatus,
|
|
juniIsisSysL2CircAuthenticationPwd,
|
|
juniIsisSysL2CircAuthenticationKeyType,
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL2CircAuthenticationRowStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete circuit management objects. This group became obsolete when
|
|
the juniIsisCircState object was added."
|
|
::= { juniIsisMIBGroups 2 }
|
|
|
|
juniIsisCircuitMgmtGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisCircLocalID,
|
|
juniIsisCircOperState,
|
|
juniIsisCircRowStatus,
|
|
juniIsisCircType,
|
|
juniIsisCircL1DefaultMetric,
|
|
juniIsisCircL1DelayMetric,
|
|
juniIsisCircL1ExpenseMetric,
|
|
juniIsisCircL1ErrorMetric,
|
|
juniIsisCircExtDomain,
|
|
juniIsisCircAdjChanges,
|
|
juniIsisCircInitFails,
|
|
juniIsisCircRejAdjs,
|
|
juniIsisCircOutCtrlPDUs,
|
|
juniIsisCircInCtrlPDUs,
|
|
juniIsisCircIDFieldLenMismatches,
|
|
juniIsisCircL2DefaultMetric,
|
|
juniIsisCircL2DelayMetric,
|
|
juniIsisCircL2ExpenseMetric,
|
|
juniIsisCircL2ErrorMetric,
|
|
juniIsisCircManL2Only,
|
|
juniIsisCircL1ISPriority,
|
|
juniIsisCircL1CircID,
|
|
juniIsisCircL1DesIS,
|
|
juniIsisCircLANL1DesISChanges,
|
|
juniIsisCircL2ISPriority,
|
|
juniIsisCircL2CircID,
|
|
juniIsisCircL2DesIS,
|
|
juniIsisCircLANL2DesISChanges,
|
|
juniIsisCircMCAddr,
|
|
juniIsisCircPtToPtCircID,
|
|
juniIsisCircL1HelloTimer,
|
|
juniIsisCircL2HelloTimer,
|
|
juniIsisCircL1HelloMultiplier,
|
|
juniIsisCircL2HelloMultiplier,
|
|
juniIsisCircMinLSPTransInt,
|
|
juniIsisCircMinLSPReTransInt,
|
|
juniIsisCircL1CSNPInterval,
|
|
juniIsisCircL2CSNPInterval,
|
|
juniIsisCircLSPThrottle,
|
|
juniIsisCircMeshGroupEnabled,
|
|
juniIsisCircMeshGroup,
|
|
juniIsisCircLevel,
|
|
juniIsisCircState,
|
|
juniIsisSysL1CircAuthenticationPwd,
|
|
juniIsisSysL1CircAuthenticationKeyType,
|
|
juniIsisSysL1CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL1CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL1CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL1CircAuthenticationRowStatus,
|
|
juniIsisSysL2CircAuthenticationPwd,
|
|
juniIsisSysL2CircAuthenticationKeyType,
|
|
juniIsisSysL2CircAuthenticationStartAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStartGenerateTime,
|
|
juniIsisSysL2CircAuthenticationStopAcceptTime,
|
|
juniIsisSysL2CircAuthenticationStopGenerateTime,
|
|
juniIsisSysL2CircAuthenticationRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The circuit management objects."
|
|
::= { juniIsisMIBGroups 3 }
|
|
|
|
juniIsisSystemMgmtGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysOrigL2LSPBuffSize,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisSysMplsTeLevel,
|
|
juniIsisSysMplsTeRtrIdIfIndex,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete system level objects for ISIS management functionality. This
|
|
group became obsolete when the MPLS tunnel table was added."
|
|
::= { juniIsisMIBGroups 4 }
|
|
|
|
juniIsisCircBFDGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisCircBfdEnable,
|
|
juniIsisCircBfdMinRxInterval,
|
|
juniIsisCircBfdMinTxInterval,
|
|
juniIsisCircBfdMultiplier
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The circuit level ISIS BFD configuration parameters."
|
|
::= { juniIsisMIBGroups 5 }
|
|
|
|
juniIsisSystemMgmtGroup3 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysOrigL2LSPBuffSize,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisSysMplsTeLevel,
|
|
juniIsisSysMplsTeRtrIdIfIndex,
|
|
juniIsisSysMplsTeSpfUseAnyBestPath,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus,
|
|
juniIsisMplsTeSystemId,
|
|
juniIsisMplsTeRouterId,
|
|
juniIsisMplsTeTunnelMetric,
|
|
juniIsisMplsTeTunnelRelMetric,
|
|
juniIsisMplsTeTunnelName }
|
|
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete system level objects for ISIS management functionality. This
|
|
group became obsolete when the reference bandwidth related variables were added."
|
|
::= { juniIsisMIBGroups 6 }
|
|
|
|
juniIsisSystemMgmtGroup4 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniIsisSysVersion,
|
|
juniIsisSysType,
|
|
juniIsisSysID,
|
|
juniIsisSysMaxPathSplits,
|
|
juniIsisSysMaxLSPGenInt,
|
|
juniIsisSysOrigLSPBuffSize,
|
|
juniIsisSysMaxAreaAddresses,
|
|
juniIsisSysMinL1LSPGenInt,
|
|
juniIsisSysMinL2LSPGenInt,
|
|
juniIsisSysPollESHelloRate,
|
|
juniIsisSysWaitTime,
|
|
juniIsisSysOperState,
|
|
juniIsisSysL1State,
|
|
juniIsisSysCorrLSPs,
|
|
juniIsisSysLSPL1DbaseOloads,
|
|
juniIsisSysManAddrDropFromAreas,
|
|
juniIsisSysAttmptToExMaxSeqNums,
|
|
juniIsisSysSeqNumSkips,
|
|
juniIsisSysOwnLSPPurges,
|
|
juniIsisSysIDFieldLenMismatches,
|
|
juniIsisSysMaxAreaAddrMismatches,
|
|
juniIsisSysOrigL2LSPBuffSize,
|
|
juniIsisSysL2State,
|
|
juniIsisSysLSPL2DbaseOloads,
|
|
juniIsisSysAuthFails,
|
|
juniIsisSysLSPIgnoreErrors,
|
|
juniIsisSysMaxAreaCheck,
|
|
juniIsisSysSetOverloadBit,
|
|
juniIsisSysSetOverloadBitStartupDuration,
|
|
juniIsisSysMaxLspLifetime ,
|
|
juniIsisSysL1SpfInterval,
|
|
juniIsisSysL2SpfInterval,
|
|
juniIsisSysIshHoldTime,
|
|
juniIsisSysIshConfigTimer,
|
|
juniIsisSysDistributeDomainWide,
|
|
juniIsisSysDistance,
|
|
juniIsisSysL1MetricStyle,
|
|
juniIsisSysL2MetricStyle,
|
|
juniIsisSysIsoRouteTag,
|
|
juniIsisSysMplsTeLevel,
|
|
juniIsisSysMplsTeRtrIdIfIndex,
|
|
juniIsisSysMplsTeSpfUseAnyBestPath,
|
|
juniIsisSysReferenceBandwidth,
|
|
juniIsisSysHighReferenceBandwidth,
|
|
juniIsisManAreaAddrRowStatus,
|
|
juniIsisSysProtSuppRowStatus,
|
|
juniIsisSummAddrRowStatus,
|
|
juniIsisSummAddrOperState,
|
|
juniIsisSummAddrDefaultMetric,
|
|
juniIsisSummAddrDelayMetric,
|
|
juniIsisSummAddrExpenseMetric,
|
|
juniIsisSummAddrErrorMetric,
|
|
juniIsisSummLevel,
|
|
juniIsisSysHostNameAreaAddr,
|
|
juniIsisSysHostNameName,
|
|
juniIsisSysHostNameType,
|
|
juniIsisSysHostNameRowStatus,
|
|
juniIsisSysAreaAuthenticationPwd,
|
|
juniIsisSysAreaAuthenticationKeyType,
|
|
juniIsisSysAreaAuthenticationStartAcceptTime,
|
|
juniIsisSysAreaAuthenticationStartGenerateTime,
|
|
juniIsisSysAreaAuthenticationStopAcceptTime,
|
|
juniIsisSysAreaAuthenticationStopGenerateTime,
|
|
juniIsisSysAreaAuthenticationRowStatus,
|
|
juniIsisSysDomainAuthenticationPwd,
|
|
juniIsisSysDomainAuthenticationKeyType,
|
|
juniIsisSysDomainAuthenticationStartAcceptTime,
|
|
juniIsisSysDomainAuthenticationStartGenerateTime,
|
|
juniIsisSysDomainAuthenticationStopAcceptTime,
|
|
juniIsisSysDomainAuthenticationStopGenerateTime,
|
|
juniIsisSysDomainAuthenticationRowStatus,
|
|
juniIsisMplsTeSystemId,
|
|
juniIsisMplsTeRouterId,
|
|
juniIsisMplsTeTunnelMetric,
|
|
juniIsisMplsTeTunnelRelMetric,
|
|
juniIsisMplsTeTunnelName }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system level objects for ISIS management functionality."
|
|
::= { juniIsisMIBGroups 7 }
|
|
END
|
|
|