mibs/MIBS/nexans/NEXANS-BM-MIB

-- ***********************************************************************************
-- * NEXANS-BM-MIB   (January 29, 2014, HUBERT THEISSEN)
-- * Copyright (c) 2003-2014  Nexans Advanced Networking Solutions
-- *
-- * MIB for Nexans Switches
-- * Release version = 4.01
-- *
-- * Changes in version 4.01
-- * - bmSwitchAdmin:     object adminLedGlobalMode added
-- * - bmTraps:		  trap portErrorDisabled added
-- * - bmSwitchPortTable: portAdminState: enum bpduDisable(6), udldDisable(7), linkFlapDisable(8), 
-- *			  errorCountDisable(9), sfpErrorDisable(10) and redundanyLoopDisable(11) added
-- * - bmSwitchPortTable: portSecurityForwardingState: enum portBpduDisabled(13), portUdldDisabled(14),
-- *			  portLinkFlapDisabled(15), portErrorCountDisabled(16), portSfpErrorDisabled(17)
-- *			  and portRedundanyLoopDisable(18) added.
-- * Changes in version 4.00
-- * - No changes. Renamed to 4.00 only
-- * Changes in version 3.98
-- * - bmSwitchAdmin:     object adminAlarmNameM1, adminAlarmNameM2 and adminFunctionInputNameF1 added
-- * Changes in version 3.97
-- * - bmSwitchAdmin:     object adminMemoryCardMode added
-- * - bmSwitchPortTable: object portPrioDot1p and portPrioIp added
-- * - bmSwitchInfo:      object infoAlarmStateM1: enum (15)...(16) added
-- * - bmSwitchInfo:      object infoAlarmStateM2: enum (15)...(16) added
-- * - bmSwitchAdmin:     object adminAlarmM1:  enum (13)...(15) added
-- * - bmSwitchAdmin:     object adminAlarmM2:  enum (13)...(15) added
-- * Changes in version 3.96
-- * - bmSwitchInfo:      object infoFunctionInputStateF1 and infoTotalConfigChanges added
-- * - bmTraps:		  trap switchFunctionInputAlarm and switchConfigurationChanged added
-- * Changes in version 3.95
-- * - Spelling was wrong: "lenght" changed to "length"
-- * - bmSwitchPortTable: object portSpeedDuplexSetup: fix1000fdxNoAutoneg(12) added
-- * Changes in version 3.94
-- * - bmSwitchInfo:      object infoAlarmStateM1/infoAlarmStateM2: enum alarmOnRemoteFunctionInput(12), 
-- *                      alarmOnRemoteAlarmDestTable(13) and alarmOnLocalAlarmDestTable(14) added
-- * - bmSwitchInfo:      object infoLastInternalMgmtWarning added
-- * - bmSwitchAdmin:     object adminSwitchVlanTableMode: enum staticModeVlans64(3) added
-- * - bmSwitchAdmin:     object adminSwitchVlanTableMode: enum staticModePortBased(4) added
-- * - bmSwitchAdmin:     object adminAlarmM1 and adminAlarmM2 added
-- * - bmSwitchPortTable: object portSpeedDuplexSetup: enum eco(9), ecoOverTemp(10) and ecoPowerSave(11) added
-- * - bmSwitchPortTable: object portPoeAdminState: enum afHighPower(7) and atHighPower(8) added
-- * - bmSwitchPortTable: object portLEDGreen: enum showLinkSpeedDuplex added
-- * - bmSwitchPortTable: object portLimiterPacketType: enum limitAllPacketsBurstsAllowed added
-- * - bmTraps:		  trap clientRemoved and internalMgmtWarning added
-- * Changes in version 3.92
-- * - bmSwitchPortTable: portLEDYellow: enum showSpeed added
-- * Changes in version 3.91
-- * - bmSwitchInfo: object infoAlarmStateM1: enum (4)...(11) added
-- * - bmSwitchInfo: object infoAlarmStateM2: enum (4)...(11) added
-- * Changes in version 3.9
-- * - Some textual corrections
-- * - bmSwitchInfo: object infoLastSfpAlarmMessage renamed to infoLastSfpEventMessage
-- * - bmSwitchSfp: objects sfpAlarmTxBiasCurrentUpperLimit, sfpAlarmTxOutputPowerLowerLimit and 
-- *                sfpAlarmRxInputPowerLowerLimit changed to MAX-ACCESS = read-write
-- * Changes in version 3.8
-- * - bmSwitchSfp: bmSwitchSfpTable added
-- * - bmSwitchInfo: object infoLastSfpAlarmMessage added
-- * - trap sfpEvent added
-- * Changes in version 3.7
-- * - bmSwitchInfo: object infoLastTftpMessage added
-- * - bmSwitchPortTable:portSecurityForwardingState: enum (3) renamed from 'noLink' to 'waitingForLink'
-- * - bmSwitchPortTable:portSecurityForwardingState: enum (5) renamed from 'forwarding' to 'authenticated'
-- * - bmSwitchPortTable:portSecurityForwardingState: enum (10)...(11) added
-- * - trap switchInternalVoltageFailure added
-- * - trap tftpMessage added
-- * Changes in version 3.6
-- * - trap switchOverTemperature renamed to switchTemperatureFailure
-- * Changes in version 3.5
-- * - bmSwitchAdmin: object adminSnmpMacTableMode added
-- * - bmSwitchPortTable: object portVoiceVlanId added
-- * Changes in version 3.4
-- * - bmSwitchAdmin: object adminDot1xAuthFailureVlanId added
-- * - bmSwitchAdmin: object adminTftpAccess added
-- * - adminMgmtAccessList: enum enableForSnmpAccess(4) added
-- * Changes in version 3.3
-- * - Textual changes for compatibility with OmniView
-- * Changes in version 3.2
-- * - bmSwitchPortTable:portTrunkingMode: enum enableWithoutTagging(3) added
-- * Changes in version 3.1
-- * - bmSwitchAdmin: SYNTAX of object infoSecurityFailMacAddr chanded to DisplayString
-- * - bmSwitchAdmin: SYNTAX of object infoNewMacAddr  chanded to DisplayString
-- * - bmSwitchInfo: object infoAlarmStateM1 and infoAlarmStateM2 added
-- * - trap switchIndustrialAlarmM1 and switchIndustrialAlarmM2 added
-- * Changes in version 3.0
-- * - bmSwitchAdmin: object adminUnsecureVlanId added
-- * - bmSwitchPortTable: object portLinkType added
-- * - bmSwitchPortTable: object portAcApSetup added
-- * - bmSwitchPortTable:portSecurityForwardingState: enum (6)...(9) added
-- * - bmSwitchPortTable:portAdminState: enum securityDisable/loopDisable added
-- * - bmSwitchPortTable:portLinkSetup: renamed to portSpeedDuplexSetup
-- * - bmSwitchPortTable:portSpeedDuplexSetup: enum fix1000Hdx and fix1000Fdx added
-- * - bmSwitchPortTable:portSpeedDuplexSetup: enum autonegAcAp no longer supported 
-- * - bmSwitchPortTable:portLinkState: enum up1000Hdx and up1000Fdx added
-- * - bmSwitchPortTable:portBandwidthLimitRxd: enum's limit16M...limit256M added
-- * - bmSwitchPortTable:portBandwidthLimitTxd: enum's limit16M...limit256M added
-- * - bmSwitchPortTable:portSecurityAdminState: enum (12)...(17) added
-- * - bmSwitchPortTable:portNativeVlanId: renamed to portDefaultVlanId
-- * - bmSwitchPortTable:portDefaultVlanId: range changed from 1...4095 to 0...4095
-- * - bmSwitchPortTable:portDot1qPrioValue: renamed to portDot1qDefaultPrioValue
-- * - bmSwitchPortTable:portPrioLevel: renamed to portDefaultPrioQueue and access
-- *                                    changed to read-only
-- * - bmSwitchPortTable:portTrunkingMode: enum enableWithoutTagging(3) removed
-- * - bmSwitchPortTable:portLEDGreen: enum blink(3) no longer supported
-- * - bmSwitchPortTable:portLEDYellow: enum blink(3) no longer supported
-- * - trap portActiveLoopDetectionFailure added
-- * - bmSwitchInfo: object infoMgmtSoftwareVersion renamed to infoMgmtFirmwareVersion
-- * Changes in version 2.9
-- * - bmSwitchInfo: object infoPoeInputPower added
-- * - bmSwitchAdmin: object adminSwitchPoEPowerLimit added
-- * - bmSwitchAdmin: object adminSwitchVlanTableMode added
-- * - bmSwitchPortTable: object portTagging renamed to portTrunkingMode
-- * - bmSwitchPortTable: object portPoePowerLimit added
-- * - bmSwitchPortTable: object portLimiterPacketType added
-- * - trap portLoopBcastFailure added
-- * - trap switchPoeVoltageFailure added
-- * - trap portPoeOverloadFailure added
-- * - trap switchPoeOverloadFailure added
-- * Changes in version 2.8
-- * - bmSwitchPortTable: enum ieee802AllowOneMacAddr added to portSecurityAdminState
-- * Changes in version 2.7
-- * - bmSwitchPortTable: object portPoeVoltage has the unit volt
-- * - bmSwitchInfo: objects renamed from bmSwitchInfo... to info... 
-- * - bmSwitchAdmin: objects renamed from bmSwitchAdmin... to admin...
-- * - trap switchMgmtAuthenticationFailure renamed to switchMgmtAuthFailure
-- * - trap radiusMgmtAuthenticationReject renamed to radiusMgmtAuthReject
-- * Changes in version 2.6
-- * - bmSwitchInfo: object bmSwitchInfoPoeInputVoltage added
-- * Changes in version 2.5
-- * - bmSwitchInfo: bmSwitchInfoType: type 16 and 17 added
-- * Changes in version 2.4
-- * - switchMgmtAuthenticationFailure trap added
-- * - radiusMgmtAuthenticationFailure trap added
-- * - radiusPortSecurityFailure trap added
-- * Changes in version 2.3
-- * - bmSwitchPortTable: enum renew added to portSecurityAdminState
-- * - bmSwitchPortTable: enum radiusAllowXxxMacAddr added to portSecurityAdminState
-- * - bmSwitchPortTable: object portSecurityForwardingState added
-- * Changes in version 2.2
-- * - object bmSwitchInfoNoOfUserPorts changed to bmSwitchInfoNoOfPorts
-- * - object bmSwitchInfoNoOfUplinkPorts changed to bmSwitchInfoNoOfReboots
-- * - description of portSecurityMacAddr1..3 modified
-- * Changes in version 2.1
-- * - switchOverTemperature trap: object bmSwitchInfoTemperature added
-- * - all traps: message formats for Castlerock's SNMPc added
-- * - bmSwitchPortTable: objects portPoeVoltage, portPoeCurrent and portPoePower added
-- ************************************************************************************

NEXANS-BM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	NOTIFICATION-TYPE,
	OBJECT-TYPE,
	Integer32,
	IpAddress,
	Counter32
		FROM SNMPv2-SMI
	MacAddress,
	DisplayString
		FROM SNMPv2-TC
	nexansANS
		FROM NEXANS-MIB;

bmSwitchMIB MODULE-IDENTITY
	LAST-UPDATED "201401290000Z"
	ORGANIZATION "Nexans Advanced Networking Solutions"
	CONTACT-INFO "h.theissen@nexans.com"
	DESCRIPTION  "MIB for Nexans switches"
	REVISION     "201401290000Z"
	DESCRIPTION  "Revision 4.01"
	::= { nexansANS 20 }

bmTraps			OBJECT IDENTIFIER ::= { bmSwitchMIB 0 }
bmSwitchInfo		OBJECT IDENTIFIER ::= { bmSwitchMIB 1 }
bmSwitchAdmin		OBJECT IDENTIFIER ::= { bmSwitchMIB 2 }
bmSwitchPort		OBJECT IDENTIFIER ::= { bmSwitchMIB 3 }
bmSwitchVlan		OBJECT IDENTIFIER ::= { bmSwitchMIB 4 }
bmSwitchSfp		OBJECT IDENTIFIER ::= { bmSwitchMIB 5 }

-- ****************************************************************************
-- * bmSwitchInfo
-- ****************************************************************************
-- * Contains global information regarding to the whole BM Switch
-- ****************************************************************************

infoDescr OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..40))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The ordering description of the switch"
	::= { bmSwitchInfo 1 }

infoType OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The infoType indentifies the product familie of this switch.
		 Refer to NEXANS-MIB for the currently defined families"
	::= { bmSwitchInfo 2 }

infoProductNo OBJECT-TYPE
	SYNTAX	    DisplayString (SIZE	(0..8))
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"The product number of the switch (8830xxxx)"
	::= { bmSwitchInfo 3 }

infoSerie OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (1..6))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The production series of the switch"
	::= { bmSwitchInfo 4 }

infoSeriesNo OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (1..6))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The production number of the switch"
	::= { bmSwitchInfo 5 }


infoManufactureDate OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (10))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The manufacturing date of the switch.
		 The display format is dd.mm.jjjj"
	::= { bmSwitchInfo 6 }

infoSwitchHardwareVersion OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (1..6))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The hardware version of the base switch."
	::= { bmSwitchInfo 7 }

infoMgmtHardwareVersion OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (1..6))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The hardware version of the plug-in management module."
	::= { bmSwitchInfo 8 }

infoMgmtFirmwareVersion OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (1..20))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The firmware version of the management module."
	::= { bmSwitchInfo 9 }

infoNoOfPorts OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The number of switching ports within the system. This includes all
		 user and uplink ports."
	::= { bmSwitchInfo 10 }

infoNoOfReboots OBJECT-TYPE
	SYNTAX      Counter32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The number of reboots since the manufacturing date. This counter 
		can't be cleared by any admin command."
	::= { bmSwitchInfo 11 }


infoTemperature OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The case temperature in degree Celsius of the switch."
	::= { bmSwitchInfo 12 }

infoTemperatureMaxAllowed OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The upper limit of the allowed temperature range in degree
		Celsius.
		If the current temperature indicated by infoTemperature
		exceeds infoTemperatureMaxAllowed, the switch sends an 
		switchOverTemperature alarm trap."
	::= { bmSwitchInfo 13 }

infoPowerVoltage2500 OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The 2.5 volt supply voltage in millivolts.
		The allowed range is 2300...2700 millivolts."
	::= { bmSwitchInfo 14 }

infoPowerVoltage3300 OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The 3.3 volt supply voltage in millivolts.
		The allowed range is 3100...3500 millivolts."
	::= { bmSwitchInfo 15 }

infoUnauthIpAddr OBJECT-TYPE
	SYNTAX      IpAddress
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The source IP address of the station which generated the last
		authentication failure. The infoUnauthAddr is also reported 
		in the switchMgmtAuthFailure alarm trap."
	::= { bmSwitchInfo 16 }

infoSecurityFailMacAddr OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..12))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The source MAC address of the station which has generated a
		the last port security failure. The infoSecurityFailMacAddr is
		also reported in the portSecurityFailure alarm trap."
	::= { bmSwitchInfo 17 }

infoNewMacAddr OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..12))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The last new source MAC address seen on a port witch has 
		portsecurity enabled. The infoNewMacAddr is also reported in the
		newMacAddress trap."
	::= { bmSwitchInfo 18 }

infoPoeInputVoltage OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current PoE input voltage delivered from the power supply."
	::= { bmSwitchInfo 19 }

infoPoeInputPower OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current PoE input power delivered from the power supply."
	::= { bmSwitchInfo 20 }

infoAlarmStateM1 OBJECT-TYPE
	SYNTAX	INTEGER {
			notSupported                (1),
			alarmOff                    (2),
			alarmOn                     (3),
			alarmOnLinkDown             (4),
			alarmOnForced               (5),
			alarmOffForced	            (6),
			alarmOnPowerSupplyS1        (7),
			alarmOnPowerSupplyS2        (8),
			alarmOnPowerSupplyS1orS2    (9),
			alarmOnFunctionInputShorted (10),
			alarmOnFunctionInputOpen    (11),
			alarmOnRemoteFunctionInput  (12),
			alarmOnRemoteAlarmDestTable (13),
			alarmOnLocalAlarmDestTable  (14),
			alarmContactForcedShorted   (15),
			alarmContactForcedOpen      (16)
	}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current state of the industrial alarm output M1."
	::= { bmSwitchInfo 21 }

infoAlarmStateM2 OBJECT-TYPE
	SYNTAX	INTEGER {
			notSupported                (1),
			alarmOff                    (2),
			alarmOn                     (3),
			alarmOnLinkDown             (4),
			alarmOnForced               (5),
			alarmOffForced	            (6),
			alarmOnPowerSupplyS1        (7),
			alarmOnPowerSupplyS2        (8),
			alarmOnPowerSupplyS1orS2    (9),
			alarmOnFunctionInputShorted (10),
			alarmOnFunctionInputOpen    (11),
			alarmOnRemoteFunctionInput  (12),
			alarmOnRemoteAlarmDestTable (13),
			alarmOnLocalAlarmDestTable  (14),
			alarmContactForcedShorted   (15),
			alarmContactForcedOpen      (16)
	}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current state of the industrial alarm output M2."
	::= { bmSwitchInfo 22 }

infoLastTftpMessage OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..80))
	MAX-ACCESS  accessible-for-notify
	STATUS      current
	DESCRIPTION
		"The message of the last successful or failed TFTP transfer.
		 This does not include TFTP transfers executed from Device Manager."
	::= { bmSwitchInfo 23 }

infoLastSfpEventMessage OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..80))
	MAX-ACCESS  accessible-for-notify
	STATUS      current
	DESCRIPTION
		"The last event message from one of the available SFP modules."
	::= { bmSwitchInfo 24 }

infoLastInternalMgmtWarning OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..80))
	MAX-ACCESS  accessible-for-notify
	STATUS      current
	DESCRIPTION
		"The last internal management warning message."
	::= { bmSwitchInfo 25 }

infoFunctionInputStateF1 OBJECT-TYPE
	SYNTAX	INTEGER {
			notSupported                (1),
			functionInputShorted        (2),
			functionInputOpen           (3)
	}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current state of the function input F1."
	::= { bmSwitchInfo 26 }

infoTotalConfigChanges OBJECT-TYPE
	SYNTAX      Counter32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The number of total configurations changes."
	::= { bmSwitchInfo 27 }

-- ****************************************************************************
-- * bmSwitchAdmin
-- ****************************************************************************
-- * Contains global administration functions regarding to the whole BM Switch
-- ****************************************************************************
adminReset	OBJECT-TYPE
	SYNTAX	INTEGER {
			resetIdle		       (1),
			resetCounters		       (2),
			rebootSwitch		       (3),
			rebootToFactoryDefaults	       (4),
			renewIpAndVlanParameter	       (5)
	}
	MAX-ACCESS  read-write
	STATUS	    current
	DESCRIPTION
		"Writing this object causes the switch to perform a reset operation.
		The following reset types are supported.
			Set Values:
			resetCounters(2)
				This action resets all error and statistic counters to zero.
				This actions will NOT reboot the switch.
			rebootSwitch(3)
				This action resets switch and management. All counters, timers and other
				volatile data are reset to there power-up values stored in flash.
				This actions will reboot the switch.
			rebootToFactoryDefaults(4)
				This action resets switch and management. All volatile and nonvolatile data
				are reset to there power-up or factory default values.
				This actions will reboot the switch.
			renewIpAndVlanParameter(5)
				This action reinitializes the IP and VLAN module of the switch so that the 
				actually set IP and VLAN parameters will take affect.
				This actions will NOT reboot the switch.
			Get values:
			resetIdle(1)
				Reading this object will allways return resetIdle(1)."
	::= { bmSwitchAdmin 1 }

adminAgentDhcp OBJECT-TYPE
	SYNTAX      INTEGER {
			enable		(1),
			disable		(2)
	}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If set to enable(1), the switch tries to get his IP parameter
		via DHCP. If set to disable(2), the switch uses the IP parameters
		defined with adminIpAddress, adminDefRouterIpAddress and 
		adminNetmask.
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5)."
	DEFVAL  { enable }
	::= { bmSwitchAdmin 2 }

adminAgentIpAddress OBJECT-TYPE
	SYNTAX      IpAddress
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The IP address of the switch agent's ethernet interface.
		If the value of adminDHCP is enable(1) this value is read-only.
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5)."
	::= { bmSwitchAdmin 3 }

adminAgentPhysAddress OBJECT-TYPE
	SYNTAX      MacAddress
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The Ethernet MAC address of the switch agent."
	::= { bmSwitchAdmin 4 }

adminAgentDefRouterIpAddress OBJECT-TYPE
	SYNTAX      IpAddress
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The IP address of the default Router.
		If the value of adminDHCP is enable(1) this value is read-only.
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5)."
	::= { bmSwitchAdmin 5 }

adminAgentNetmask OBJECT-TYPE
	SYNTAX      IpAddress
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The IP Netmask of the connected network.
		If the value of adminDHCP is enable(1) this value is read-only.
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5)."
	::= { bmSwitchAdmin 6 }

adminAgentDhcpServerIpAddress OBJECT-TYPE
	SYNTAX      IpAddress
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The IP address of the last used DHCP server."
	::= { bmSwitchAdmin 7 }

adminAgentVlanId  OBJECT-TYPE
	SYNTAX      Integer32 (1..4095)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The VLAN-ID assigned to the agent. 
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5)."
	::= { bmSwitchAdmin 8 }

adminAgentPrioValue  OBJECT-TYPE
	SYNTAX      Integer32 (0..7)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The IEEE802.1Q priority value and queue assigned to all frames transmitted
		by the agent.
		The definition between value, service class and queue are as follows:
		0=Best Effort (queue=0),
		1=Background (queue=0),
		2=Reserved (queue=1),
		3=Excellent Effort (queue=1),
		4=Controlled Load (queue=2),
		5=Video (queue=2),
		6=Voice (queue=3),
		7=Network Control (queue=3)"
	::= { bmSwitchAdmin 9 }

adminAddrAgingTimeMinutes OBJECT-TYPE
        SYNTAX       Integer32 (1..68)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
		"The timeout period in minutes for aging out dynamically
		learned MAC addresses . The allowed range is 1 minute
		to 68 minutes."
	DEFVAL  { 5 }
	::= { bmSwitchAdmin 10 }

adminSwitchPortMirror OBJECT-TYPE
	SYNTAX     INTEGER {
			enable		(1),
			disable		(2)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If set to enable(1), the switch doesn't use address learning.
		This affects that any received packet will be forwarded to all ports
		of the particular VLAN. The switch acts like a hub within each VLAN."
	DEFVAL  { disable }
	::= { bmSwitchAdmin 11 }

adminMgmtAccessList OBJECT-TYPE
	SYNTAX     INTEGER {
			disable				(1),
			enableForNexManAccess		(2),
			enableForAllAccess		(3),
			enableForSnmpAccess		(4)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If set to enableForNexManAccess(2) or enableForAllAccess(3), the
		switch only accepts read or write requests from IP addresses which
		are listed in the management accesslist."
	DEFVAL  { disable }
	::= { bmSwitchAdmin 12 }

adminSwitchPoEPowerLimit OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The limit for the POE input power from the power supply in VA.
		If the current power exceeds this value a overload conditions occurs and 
		the inline power for the highest port number will be switched off."
	::= { bmSwitchAdmin 13 }

adminSwitchVlanTableMode OBJECT-TYPE
	SYNTAX     INTEGER {
			staticMode		(1),
			dynamicMode		(2),
			staticModeVlans64	(3),
			staticModePortBased	(4)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If set to staticMode(1) or staticModeVlans64(3) any existing VLAN table entry
		must be removed manually by management. With staticMode(1) total 16 VLAN-ID's 
		and with staticModeVlans64(3) total 64 VLAN-ID's are supported. 
		If set to dynamicMode(2) all unused VLAN-ID's are removed automatically by the 
		switch. This means, that all VLAN-ID's not assigned to a port Default-VLAND or 
		to the Unsecure-VLAN will be removed."
	DEFVAL  { staticMode }
	::= { bmSwitchAdmin 14 }

adminUnsecureVlanId  OBJECT-TYPE
	SYNTAX      Integer32 (1..4095)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The VLAN-ID of the unsecure VLAN"
	::= { bmSwitchAdmin 15 }

adminDot1xAuthFailureVlanId  OBJECT-TYPE
	SYNTAX      Integer32 (0..4095)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The VLAN-ID in the case of an IEEE802.1X authentication failure.
		 Setting the VLAN-ID to 0 disables the authentication failure VLAN."
	::= { bmSwitchAdmin 16 }

adminTftpAccess OBJECT-TYPE
	SYNTAX     INTEGER {
			tftpAccessDisable	(1),
			tftpAccessReadOnly	(2),
			tftpAccessReadWrite	(3)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If 'TFTP authentication via SNMP' is disabled, this value is allways
		 tftpAccessDisable(1).
                 If 'TFTP authentication via SNMP' is read/only or read/write, an this
		 object is read, the value is tftpAccessReadOnly(2) and the agent allowes
		 a single TFTP read access of the switch configuration.
                 If 'TFTP authentication via SNMP' is read/write, this value can be set
		 to tftpAccessReadWrite(3) and the agent allowes a single TFTP read or
		 write access to the configuration or a single firmware upgrade.
		 After finishing the TFTP transfer, this value will return to
		 ftpAccessDisable(1) automatically.
		 Note: If the 'NexMan authentication mode' is set to 'none',
		 TFTP read and write access is allways allowed."
	::= { bmSwitchAdmin 17 }


adminSnmpMacTableMode OBJECT-TYPE
	SYNTAX     INTEGER {
			listAllPorts		(1),
			listUserPortsOnly	(2)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If set to listAllPorts(1) the BRIDGE-MIBs dot1dTpFdbTable lits MAC address
		 of all ports.
		 If set to listUserPortsOnly(2) the BRIDGE-MIBs dot1dTpFdbTable lits only 
		 MAC addresses of user ports. MAC addresses of uplink/downlink ports
		 are ignored."
	::= { bmSwitchAdmin 18 }

adminAlarmM1 OBJECT-TYPE
	SYNTAX	INTEGER {
			notSupported                   (1),
			alarmLinkDown                  (2),
			alarmOnForced                  (3),
			alarmOffForced	               (4),
			alarmPowerSupply1Failure       (5),
			alarmPowerSupply2Failure       (6),
			alarmPowerSupply1or2Failure    (7),
			alarmLocalFunctionInputShorted (8),
			alarmLocalFunctionInputOpen    (9),
			alarmRemoteFunctionInput       (10),
			alarmRemoteAlarmDestination    (11),
			alarmLocalAlarmDestination     (12),
			alarmForceContactShorted       (13),
			alarmForceContactOpen          (14),
			alarmForceContactOpenShorted   (15)
	}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The current setup of the industrial alarm output M1."
	::= { bmSwitchAdmin 19 }

adminAlarmM2 OBJECT-TYPE
	SYNTAX	INTEGER {
			notSupported                   (1),
			alarmLinkDown                  (2),
			alarmOnForced                  (3),
			alarmOffForced	               (4),
			alarmPowerSupply1Failure       (5),
			alarmPowerSupply2Failure       (6),
			alarmPowerSupply1or2Failure    (7),
			alarmLocalFunctionInputShorted (8),
			alarmLocalFunctionInputOpen    (9),
			alarmRemoteFunctionInput       (10),
			alarmRemoteAlarmDestination    (11),
			alarmLocalAlarmDestination     (12),
			alarmForceContactShorted       (13),
			alarmForceContactOpen          (14),
			alarmForceContactOpenShorted   (15)
	}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The current setup of the industrial alarm output M2."
	::= { bmSwitchAdmin 20 }

adminMemoryCardMode OBJECT-TYPE
	SYNTAX     INTEGER {
			notSupported            (1),
			mcEnabled		(2),
			mcDisabled		(3),
			mcPermanentDisabled	(4)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If set to mcDisabled(2), the memory card is disabled but may
		 be re-enabled later by writing mcEnabled(1).
		 If set to mcPermanentDisabled(3), the memory card is disabled 
		 permanently and can't be re-enabled by management or any
		 kind of hardware reset."
	::= { bmSwitchAdmin 21 }

adminAlarmNameM1 OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..32))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"An administratively assigned name for alarm output M1.
		 The configured name will be send as part of alarm message
		 switchIndustrialAlarmM1."
	DEFVAL  { "not defined" }
	::= { bmSwitchAdmin 22 }

adminAlarmNameM2 OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..32))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"An administratively assigned name for alarm output M1.
		 The configured name will be send as part of alarm message
		 switchIndustrialAlarmM2."
	DEFVAL  { "not defined" }
	::= { bmSwitchAdmin 23 }

adminFunctionInputNameF1 OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..32))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"An administratively assigned name for function input F1.
		 The configured name will be send as part of alarm message
		 switchFunctionInputAlarm."
	DEFVAL  { "not defined" }
	::= { bmSwitchAdmin 24 }

adminLedGlobalMode OBJECT-TYPE
	SYNTAX     INTEGER {
			ledGlobalModeNotSupported  (1),
			ledGlobalModeStandard	   (2),
			ledGlobalModeAllOff        (3),
			ledGlobalModeAllOn         (4),
			ledGlobalModeMgmtOnly      (5)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"Set the global mode for all front side LEDs."
	::= { bmSwitchAdmin 25 }

-- ****************************************************************************
-- * bmSwitchPort
-- ****************************************************************************
-- * The bmSwitchPort object group gives status and control information to every
-- * physical port on a switch.
-- ****************************************************************************

bmSwitchPortTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF PortEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"A list of port entries for the switch.	The number of
		entries is defined by ifNumber."
	::= { bmSwitchPort 1 }


bmSwitchPortEntry OBJECT-TYPE
	SYNTAX      PortEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"A port entry in the table containing information about a
		port in the switch."
	INDEX   { portIndex }
	::= { bmSwitchPortTable 1 }


PortEntry ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portAdminState
			INTEGER,
		portSpeedDuplexSetup
			INTEGER,
		portLinkState
			INTEGER,
		portErrorCounter
			Counter32,
		portRemoteFault
			INTEGER,
		portDefaultVlanId
			Integer32,
		portTrunkingMode
			INTEGER,
		portDot1qDefaultPrioValue
			Integer32,
		portDefaultPrioQueue
			Integer32,
		portLEDGreen
			INTEGER,
		portLEDYellow
			INTEGER,
		portBandwidthLimitRxd
			INTEGER,
		portBandwidthLimitTxd
			INTEGER,
		portSecurityAdminState
			INTEGER,
		portSecurityMacAddr1
			MacAddress,
		portSecurityMacAddr2
			MacAddress,
		portSecurityMacAddr3
			MacAddress,
		portPoeAdminState
			INTEGER,
		portPoeVoltage
			Integer32,
		portPoeCurrent
			Integer32,
		portPoePower
			Integer32,
		portSecurityForwardingState
			INTEGER,
		portPoePowerLimit
			Integer32,
		portLimiterPacketType
			INTEGER,
		portAcApSetup
			INTEGER,
		portLinkType
			INTEGER,
		portVoiceVlanId
			Integer32,
		portPrioDot1p
			INTEGER,
		portPrioIp
			INTEGER
		}


portIndex OBJECT-TYPE
	SYNTAX      Integer32 (1..64)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A unique value for each port.  Its value ranges between 1
		and the value of ifNumber.
		The port identified by a particular value of this index is
		the same port as identified by the same value of ifIndex."
	::= { bmSwitchPortEntry 1 }

portDescr OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..255))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing information about the
		interface. Same as ifDescr."
	::= { bmSwitchPortEntry 2 }

portName OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..15))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"An administratively assigned name for this port."
	DEFVAL  { "" }
	::= { bmSwitchPortEntry 3 }

portAdminState OBJECT-TYPE
	SYNTAX      INTEGER {
			allwaysEnable		(1),
			enable			(2),
			adminDisable		(3),
			securityDisable		(4),
			loopDisable		(5),
			bpduDisable		(6),
			udldDisable		(7),
			linkFlapDisable		(8),
			errorCountDisable	(9),
			sfpErrorDisable		(10),
			redundanyLoopDisable	(11)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"A value indicating the current state of the port.
		A SET to this object enables (2) or disables (3) the port.
			The possible values returned by GET are:
			allwaysEnable(1)
				The port is always enabled (usually the uplink port).
			enable(2)
				The port is active to transmit or receive data.
			disable(3)
				The port is inactive and unable to transmit or receive data.
			securityDisable(4)
				The port has been automatically disabled because of security 
				violation.
			loopDisable(5)
				The port has been automatically disabled because of the
				active loop protection.
			bpduDisable(6)
				The port has been automatically disabled because a BPDU has been 
				received on a Spanning Tree disabled port.
			udldDisable(7)
				The port has been automatically disabled because of the
				UDLD function.
			linkFlapDisable(8)
				The port has been automatically disabled because of the
				link flap protection.
			errorCountDisable(9)
				The port has been automatically disabled because of the
				error counter incrementation detection.
			sfpErrorDisable(10)
				The port has been automatically disabled because of wromg
				SFP inserted or SFP malfunction.
			redundanyLoopDisable(11)
				The port has been automatically disabled because of loop
				detection while spannung tree was enabled"
	::= { bmSwitchPortEntry 4 }

portSpeedDuplexSetup OBJECT-TYPE
	SYNTAX      INTEGER {
			autoneg			(1),
			fix10Hdx		(2),
			fix10Fdx		(3),
			fix100Hdx		(4),
			fix100Fdx		(5),
--			autonegAcAp		(6),  no longer supported for V3.x switchsoftware
--						      please use portAcApSetup for Autoneg.-Autopol.
			fix1000Hdx		(7),  
			fix1000Fdx		(8),
			eco			(9),
			ecoOverTemp		(10),
			ecoPowerSave		(11),
			fix1000fdxNoAutoneg	(12)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"A value indicating the current speed and duplex link setup.
		Independent of portSpeedDuplexSetup the port may be disabled
		by portAdminState."
	::= { bmSwitchPortEntry 5 }

portLinkState OBJECT-TYPE
	SYNTAX      INTEGER {
			down		(1),
			up10Hdx		(2),
			up10Fdx		(3),
			up100Hdx	(4),
			up100Fdx	(5),
			up1000Hdx	(6),
			up1000Fdx	(7)
			}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A value indicating the current link state."
	::= { bmSwitchPortEntry 6 }

portErrorCounter OBJECT-TYPE
	SYNTAX      Counter32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"Errors are usually caused by a FDX/HDX mismatch between the switch port
		and the connected port. If the switch detects a incrementation of this
		counter, he will send a portErrorCountFailure trap.
		The counted errors are depending on the switch type.
		For BM-A, BM+ and Access Switches:
	        - Received packets with bad CRC,
	        - Received packets with bad alignment,
	        - Late collisions (only valid if Link State is 10HDX or 100HDX).
	      For old BM Switches:
	        - Received packets with bad CRC"
	::= { bmSwitchPortEntry 7 }

portRemoteFault OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported    (1),
			enable          (2),
			disable         (3)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If portRemoteFault is enabled for this port, the port transmitter will
		be only enabled if the port receiver has a valid link (portLinkState must
		not be down)."
	::= { bmSwitchPortEntry 8 }


portDefaultVlanId  OBJECT-TYPE
	SYNTAX      Integer32 (0..4095)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The Default-VLAN-ID assigned to this port.
		This Default-VLAN-ID has differnt affects depending on received
		or transmited frames:
		a) All received frames, which have no VLAN-tag, will
			be assigned to the Default-VLAN-ID.
		b) All transmited frames, which belong to the Default-VLAN,
			are send without a VLAN-tag.
		If portTrunkingMode is set to dot1qTagging, all frames are transmited
		with a VLAN-tag, except frames which belong to the Default-VLAN-ID.
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5).
		Setting this value to 0 for a port with dot1qTagging will disable the
		Default-VLAN. This means, that all frames are send tagged."
	::= { bmSwitchPortEntry 9 }

portTrunkingMode  OBJECT-TYPE
	SYNTAX      INTEGER {
			dot1qTagging		(1),
			disable			(2),
			enableWithoutTagging	(3)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If portTrunkingMode is set to dot1qTagging, all frames are transmited
		with a VLAN-tag, except frames which belong to portNativeVlanId. 
		If portTrunkingMode is set to enableWithoutTagging, all frames are transmited
		without a VLAN-tag. 
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5)."
	::= { bmSwitchPortEntry 10 }

portDot1qDefaultPrioValue  OBJECT-TYPE
	SYNTAX      Integer32 (0..7)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The default IEEE802.1Q priority and queue assigned all frames received
		on this port, for which no other priorisation applies (IEEE801.1q Tag or 
		IPv4/IPv6). 
		The definition between value, service class and queue are as follows:
		0=Best Effort (queue=0),
		1=Background (queue=0),
		2=Reserved (queue=1),
		3=Excellent Effort (queue=1),
		4=Controlled Load (queue=2),
		5=Video (queue=2),
		6=Voice (queue=3),
		7=Network Control (queue=3)"
	::= { bmSwitchPortEntry 11 }

portDefaultPrioQueue   OBJECT-TYPE
	SYNTAX      Integer32 (0..3)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The default priority queue assigned all frames received on this port,
		for which no other priorisation applies (IEEE801.1q Tag or IPv4/IPv6). 
		A value of 0 means the lowest priority level.
		A value of 3 means the highest priority level.
		To change this default queue use object portDot1qDefaultPrioValue."
	::= { bmSwitchPortEntry 12 }

portLEDGreen   OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported		(1),
			showLinkState		(2),
			blink			(3),
			allwaysOff		(4),
			allwaysOn		(5),
			showLinkSpeedDuplex	(6)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The function of the green port LED. Only supported for user ports"
	::= { bmSwitchPortEntry 13 }

portLEDYellow   OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported	(1),
			showDuplexState	(2),
			blink		(3), 
			allwaysOff	(4),
			allwaysOn	(5),
			showPoeEnabled	(6),
			showSpeed	(7)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The function of the yellow port LED. Only supported for user ports"
	::= { bmSwitchPortEntry 14 }

portBandwidthLimitRxd   OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported	(1),
			disable		(2),
			limit128k	(3),
			limit256k	(4),
			limit512k	(5),
			limit1M		(6),
			limit2M		(7),
			limit4M		(8),
			limit8M		(9),
			limit16M	(10),
			limit32M	(11),
			limit64M	(12),
			limit128M	(13),
			limit256M	(14)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The bandwidth limiter for received packets. If set to disable(2) the
		limiter will be disabled."
	::= { bmSwitchPortEntry 15 }

portBandwidthLimitTxd   OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported	(1),
			disable		(2),
			limit128k	(3),
			limit256k	(4),
			limit512k	(5),
			limit1M		(6),
			limit2M		(7),
			limit4M		(8),
			limit8M		(9),
			limit16M	(10),
			limit32M	(11),
			limit64M	(12),
			limit128M	(13),
			limit256M	(14)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The bandwidth limiter for transmitted packets. If set to disable(2) the
		limiter will be disabled."
	::= { bmSwitchPortEntry 16 }

portSecurityAdminState  OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported			(1),
			disable				(2),
			manualSettingMacAddr		(3),
			autoAllowOneMacAddr		(4),
			autoAllowTwoMacAddr		(5),
			autoAllowThreeMacAddr		(6),
			radiusAllowOneMacAddr		(7),
			radiusAllowTwoMacAddr		(8),
			radiusAllowThreeMacAddr		(9),
			renew				(10),
			ieee802AllowOneMacAddr		(11),
			vendorSettingMacAddr		(12),
			ieee802AllowMultiMacAddr	(13),
			ieee802OrRadiusOneMac		(14),
			ieee802AndRadiusTwoMac		(15),
			learnOneMacAddr			(16),
			learnTwoMacAddr			(17)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"Enables the port security feature for that port. 
		 A value of notSupported(1) means, that port security ist not supported or 
		 disabled for that port (i.e. uplink port). The command renew(10) clears
		 all learned MAC addresses and enables the port if it is disabled.
		 See documentation for more details."
	::= { bmSwitchPortEntry 17 }

portSecurityMacAddr1 OBJECT-TYPE
	SYNTAX      MacAddress
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The first MAC address used for port security.
		If portSecurityAdminState has the value disable(2), portSecurityManualSettingMacAddr(3)
		or vendorSettingMacAddr(12) then this object will be read-write.
		In any other mode this object will be read-only and shows the first automatically
		learned MAC addresses for that port."
	::= { bmSwitchPortEntry 18 }

portSecurityMacAddr2 OBJECT-TYPE
	SYNTAX      MacAddress
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The second MAC address used for port security.
		If portSecurityAdminState has the value disable(2), portSecurityManualSettingMacAddr(3)
		or vendorSettingMacAddr(12) then this object will be read-write.
		In any other mode this object will be read-only and shows the second automatically
		learned MAC addresses for that port."
	::= { bmSwitchPortEntry 19 }

portSecurityMacAddr3 OBJECT-TYPE
	SYNTAX      MacAddress
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The third MAC address used for port security.
		If portSecurityAdminState has the value disable(2), portSecurityManualSettingMacAddr(3)
		or vendorSettingMacAddr(12) then this object will be read-write.
		In any other mode this object will be read-only and shows the third automatically
		learned MAC addresses for that port."
	::= { bmSwitchPortEntry 20 }

portPoeAdminState OBJECT-TYPE
	SYNTAX	INTEGER {
			notSupported	(1),
			off		(2),
			forcedOn	(3),
			autoOn		(4),
			overloadFail	(5),
			reset		(6),
			afHighPower	(7),
			atHighPower	(8)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"If no POE adapter is installed this object is read-only and will always
		report notSupported(1). The possible values are:
			notSupported(1):
				No adapter installed or not supported for that port (i.e. uplink port).
			off(2):
				Adapter installed but inline power for that port is switched off.
			forcedOn(3):
				Adapter installed and inline power is asserted permanently. In the case
				of an IEEE802.3af adapter this setting will disable the IEEE802.3af automatic
				detection.
			autoOn(4):
				This setting is only supported if a IEEE802.3af adapter is installed.
				The adapter automatically detects if the connected device
				is IEEE802.3af compliant and will assert the power if possible.
			overloadFail(5):
				Adapter installed but inline power for that port is automatically
				switched off because of a overload condition at that port."
	::= { bmSwitchPortEntry 21 }

portPoeVoltage OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current PoE output voltage at this port in volts."
	::= { bmSwitchPortEntry 22 }

portPoeCurrent OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current PoE output current at this port in milliampere."
	::= { bmSwitchPortEntry 23 }

portPoePower OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current PoE output power at this port in milliwatt. The output
		power is the product of portPoeVoltage and portPoeCurrent."
	::= { bmSwitchPortEntry 24 }

portSecurityForwardingState OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported		(1),
			portAdminDisabled	(2),
			waitingForLink		(3),
			unsecureVLAN		(4),
			portAuthenticated	(5),
			portSecurityDisabled	(6),
			portLoopDisabled	(7),
			authFailureVLAN		(8),
			securityWarning		(9),
			authenticatingClients	(10),
			waitingForMacAddress	(11),
			allRadiusServersDown	(12),
			portBpduDisabled	(13),
			portUdldDisabled	(14),
			portLinkFlapDisabled	(15),
			portErrorCountDisabled	(16),
			portSfpErrorDisabled	(17),
			portRedundanyLoopDisable(18)
			}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The port security forwarding state of that port.
		 See documentation for details."
	::= { bmSwitchPortEntry 25 }

portPoePowerLimit OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The limit for the POE output power at this port in VA. If the
		current power exceeds this value a overload conditions occurs and 
		the inline power for that port will be switched off."
	::= { bmSwitchPortEntry 26 }

portLimiterPacketType   OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported			(1),
			limitAllPackets			(2),
			limitLoopBcastPackets	  	(3),
			limitAllPacketsBurstsAllowed	(4)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The packet type for bandwidth limiter. If set to limitAllPacktes(2)
		then all packets are limited. If set to limitLoppBcastPackets(3) only
		flooted loop- and broadcast-pakets are limited."
	::= { bmSwitchPortEntry 27 }

portAcApSetup OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported	(1),
			allwaysEnable   (2),
			enable          (3),
			disable         (4)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"If portAcApSetup is enabled, the switch will perform Autocrossover
		and Autopolarity for this port. This function should only be enabled
		if portSpeedDuplexSetup ist set to autoneg."
	::= { bmSwitchPortEntry 28 }

portLinkType OBJECT-TYPE
	SYNTAX      INTEGER {
			user			(1),
			userWithLoopProtection	(2),
			upDownlink		(3)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The link type of that port. If set to upDownlink(3) the portAdminState 
		 will be forced to enable." 
	::= { bmSwitchPortEntry 29 }

portVoiceVlanId  OBJECT-TYPE
	SYNTAX      Integer32 (0..4095)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The Voide-VLAN-ID assigned to this port.
		Packets of this Voice-VLAN are allway send with a VLAN-Tag, because
		IP-Phones normaly need a tagged VLAN.
		If portTrunkingMode is set to dot1qTagging, ALL frames are transmited
		with a VLAN-tag, except frames which belong to the Default-VLAN-ID. In
		this case the Voice-VLAN-ID has no effect.
		Changes of this value will take affect after the next switch reboot or
		after setting adminReset to renewIpAndVlanParameter(5).
		Setting this value to 0 will disable the Voice-VLAN."
	::= { bmSwitchPortEntry 30 }

portPrioDot1p  OBJECT-TYPE
	SYNTAX      INTEGER {
			prioDot1pDisabled	(1),
			prioDot1pEnabled	(2)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"Defines whether port prioritisation for IEEE802.1p packets is enabled."
	::= { bmSwitchPortEntry 31 }

portPrioIp  OBJECT-TYPE
	SYNTAX      INTEGER {
			prioIpDisabled	(1),
			prioIpEnabled	(2)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"Defines whether port prioritisation for IPv4/IPv6 packets is enabled."
	::= { bmSwitchPortEntry 32 }

-- ****************************************************************************
-- * bmSwitchPort subtables
-- ****************************************************************************
-- * Because the bmSwitchPortTable has too many entries for a usefull display
-- * we define some meaningful subtables with related objects
-- ****************************************************************************

PortStatus ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portLinkType
			INTEGER,
		portAdminState
			INTEGER,
		portSpeedDuplexSetup
			INTEGER,
		portAcApSetup
			INTEGER,
		portLinkState
			INTEGER,
		portErrorCounter
			Counter32,
		portRemoteFault
			INTEGER
		}

PortVlan ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portDefaultVlanId
			Integer32,
		portVoiceVlanId
			Integer32,
		portTrunkingMode
			INTEGER
		}

PortPrio ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portDot1qDefaultPrioValue
			Integer32,
		portDefaultPrioQueue
			Integer32,
		portPrioDot1p
			INTEGER,
		portPrioIp
			INTEGER
		}

PortLEDs ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portLEDGreen
			INTEGER,
		portLEDYellow
			INTEGER
		}

PortSecurity ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portAdminState
			INTEGER,
		portSecurityAdminState
			INTEGER,
		portSecurityForwardingState
			INTEGER,
		portSecurityMacAddr1
			MacAddress,
		portSecurityMacAddr2
			MacAddress,
		portSecurityMacAddr3
			MacAddress
		}

PortBandwidthLimiter ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portBandwidthLimitRxd
			INTEGER,
		portBandwidthLimitTxd
			INTEGER,
		portLimiterPacketType
			INTEGER
		}

PortPoe ::= SEQUENCE {
		portIndex
			Integer32,
		portDescr
			DisplayString,
		portName
			DisplayString,
		portLEDYellow
			INTEGER,
		portPoeAdminState
			INTEGER,
		portPoeVoltage
			Integer32,
		portPoeCurrent
			Integer32,
		portPoePower
			Integer32,
		portPoePowerLimit
			Integer32
		}


-- ****************************************************************************
-- * bmSwitchVlan
-- ****************************************************************************
-- * The bmSwitchVlan object group gives status and control information to all
-- * VLAN ID's known by the switch.
-- ****************************************************************************

bmSwitchVlanTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF VlanEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"A list of Virtual LAN instances."
	::= { bmSwitchVlan 1 }

bmSwitchVlanEntry OBJECT-TYPE
	SYNTAX      VlanEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"VLAN entry."
	INDEX   { vlanIndex }
	::= { bmSwitchVlanTable 1 }

VlanEntry ::= SEQUENCE {
		vlanIndex
			Integer32,
		vlanId
			Integer32,
		vlanDescr
			DisplayString
		}

vlanIndex OBJECT-TYPE
	SYNTAX      Integer32 (1..16)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A unique value for each VLAN entry. Its value ranges between 1 and 16."
	::= { bmSwitchVlanEntry 1 }

vlanId OBJECT-TYPE
	SYNTAX      Integer32 (0..4095)
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The VLAN-ID assigned to this entry. Only entries with a VLAN-ID greater
		then 0 are valid entries.
		Setting a valid VLAN-ID to 0 will disable that entry and also delete the
		vlanDescr
		To add a new VLAN-ID first set an valid or non valid entry to the
		desired	VLAN-ID. In a second step you may set the vlanDescr.
		Only VLAN-ID's listed in the vlanTable are forwarded by the switch."
	::= { bmSwitchVlanEntry 2 }

vlanDescr OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..50))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"A textual string containing information about the VLAN."
	::= { bmSwitchVlanEntry 3 }


-- ****************************************************************************
-- * bmSwitchSfp
-- ****************************************************************************
-- * The bmSwitchSfp object group gives status and control information to every
-- * installed SFP module.
-- ****************************************************************************

bmSwitchSfpTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF SfpEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"A list of SFP entries for the switch. The number of
		 entries is defined by ifNumber."
	::= { bmSwitchSfp 1 }


bmSwitchSfpEntry OBJECT-TYPE
	SYNTAX      SfpEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"A SFP entry in the table containing information about a
		SFP in the switch."
	INDEX   { sfpPortIndex }
	::= { bmSwitchSfpTable 1 }


SfpEntry ::= SEQUENCE {
		sfpPortIndex
			Integer32,
		sfpState
			INTEGER,
		sfpInfoVendorName 
			DisplayString,
		sfpInfoPartNumber 
			DisplayString,
		sfpInfoRevisionNumber 
			DisplayString,
		sfpInfoSerialNumber 
			DisplayString,
		sfpInfoDateCode 
			DisplayString,
		sfpInfoBitRate  
			DisplayString,
		sfpInfoWavelength 
			DisplayString,
		sfpInfoLength9um 
			DisplayString,
		sfpInfoLength50um 
			DisplayString,
		sfpInfoLength62um 
			DisplayString,
		sfpInfoConnectorDescr 
			DisplayString,
		sfpDiagTemperature 
			Integer32,
		sfpDiagSupplyVoltage 
			Integer32,
		sfpDiagTxBiasCurrent 
			Integer32,
		sfpDiagTxOutputPower
			Integer32,
		sfpDiagTxOutputPowerDbm 
			Integer32,
		sfpDiagRxIntputPower
			Integer32,
		sfpDiagRxInputPowerDbm 
			Integer32,
		sfpAlarmTxBiasCurrentUpperLimit
			Integer32,
		sfpAlarmTxOutputPowerLowerLimit
			Integer32,
		sfpAlarmRxInputPowerLowerLimit
			Integer32
		}

sfpPortIndex OBJECT-TYPE
	SYNTAX      Integer32 (1..64)
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A unique value for each port. Its value ranges between 1
		and the value of ifNumber.
		The port identified by a particular value of this index is
		the same port as identified by the same value of ifIndex."
	::= { bmSwitchSfpEntry 1 }

sfpState OBJECT-TYPE
	SYNTAX      INTEGER {
			notSupported          (1),
			noSfpInserted         (2),
			validSfpNoDiagnostic  (3),
			validSfpWithDiagnostic(4)
			}
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A value indicating the current state of the SFP module.
		The possible values returned are:
		notSupported(1)
			The port has no SFP slot.
		noSfpInserted(2)
			The port has a SFP slot but there is no valid SFP module inserted.
		validSfpNoDiagnostic(3)
			A valid SFP module is inserted but the module doesn't supports 
			diagnostic values.
		validSfpWithDiagnostic(4)
			A valid SFP module which supports diagnostic is inserted."
	::= { bmSwitchSfpEntry 2 }

sfpInfoVendorName OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the vendor name of the SFP module."
	::= { bmSwitchSfpEntry 3 }

sfpInfoPartNumber OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the part number of the SFP module."
	::= { bmSwitchSfpEntry 4 }

sfpInfoRevisionNumber OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the revision number of the SFP module."
	::= { bmSwitchSfpEntry 5 }

sfpInfoSerialNumber OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the serial number 	of the SFP module."
	::= { bmSwitchSfpEntry 6 }

sfpInfoDateCode OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the date code of the SFP module."
	::= { bmSwitchSfpEntry 7 }

sfpInfoBitRate  OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the bit rate of the SFP module.
		The unit is Mbit/s"
	::= { bmSwitchSfpEntry 8 }

sfpInfoWavelength OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the wavelength of the SFP module.
		The unit is nm."
	::= { bmSwitchSfpEntry 9 }

sfpInfoLength9um OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the typically supported
		fiber length for 9um fiber cable. The unit is meters."
	::= { bmSwitchSfpEntry 10 }

sfpInfoLength50um OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the typically supported
		fiber length for 50um fiber cable. The unit is meters."
	::= { bmSwitchSfpEntry 11 }

sfpInfoLength62um OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the typically supported
		fiber length for 62.5um fiber cable. The unit is meters."
	::= { bmSwitchSfpEntry 12 }

sfpInfoConnectorDescr OBJECT-TYPE
	SYNTAX      DisplayString (SIZE (0..17))
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"A textual string containing the connector description
		of the SFP module."
	::= { bmSwitchSfpEntry 13 }

sfpDiagTemperature OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current temperature of the SFP module in degree celsius."
	::= { bmSwitchSfpEntry 14 }

sfpDiagSupplyVoltage OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current supply voltage of the SFP module in millivolt."
	::= { bmSwitchSfpEntry 15 }

sfpDiagTxBiasCurrent OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current transmitter bias current of the SFP module in milliampere."
	::= { bmSwitchSfpEntry 16 }

sfpDiagTxOutputPower OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current transmitter output power of the SFP module in microwatt."
	::= { bmSwitchSfpEntry 17 }

sfpDiagTxOutputPowerDbm OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current transmitter output power of the SFP module in dbm."
	::= { bmSwitchSfpEntry 18 }

sfpDiagRxIntputPower OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current receiver input power of the SFP module in microwatt."
	::= { bmSwitchSfpEntry 19 }

sfpDiagRxInputPowerDbm OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-only
	STATUS      current
	DESCRIPTION
		"The current receiver input power of the SFP module in dbm."
	::= { bmSwitchSfpEntry 20 }

sfpAlarmTxBiasCurrentUpperLimit OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The maximum allowed transmitter bias current in milliampere.
		If the current value indicated by sfpDiagTxBiasCurrent
		exceeds sfpAlarmTxBiasCurrentUpperLimit, the switch sends an 
		sfpEvent alarm trap.
		If the value of this limit is 0 no alarm will be send."
	::= { bmSwitchSfpEntry 21 }

sfpAlarmTxOutputPowerLowerLimit OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The minimum required transmitter output power in microwatt.
		If the power value indicated by sfpDiagTxOutputPower
		falls below sfpAlarmTxOutputPowerLowerLimit, the switch sends an 
		sfpEvent alarm trap.
		If the value of this limit is 0 no alarm will be send."
	::= { bmSwitchSfpEntry 22 }

sfpAlarmRxInputPowerLowerLimit OBJECT-TYPE
	SYNTAX      Integer32
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The minimum required received input power in microwatt.
		If the power value indicated by sfpDiagRxInputPower
		falls below sfpAlarmRxInputPowerLowerLimit, the switch sends an 
		sfpEvent alarm trap.
		If the value of this limit is 0 no alarm will be send."
	::= { bmSwitchSfpEntry 23 }

-- ****************************************************************************
-- * bmTraps
-- ****************************************************************************
-- * The enterprise specific traps
-- ****************************************************************************
switchTemperatureFailure NOTIFICATION-TYPE
	OBJECTS		{ infoTemperature }
	STATUS		current
	--&MESG "Temperature failure: Temperature(degree celsius)=$1"
        DESCRIPTION	"A TemperatureFailure signifies that the switch hardware
			has detected under- or overtemperature condition."
	::= { bmTraps 1 }

portLinkChange NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr,	portName, portLinkState	}
	STATUS		current
	--&MESG "Port link change: portLinkState=$'4, portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"The trap is sent whenever the link state of a port changes
			from link-up to link-down or from link-down to link-up"
	::= { bmTraps 2 }

portNewMacAddress NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr,	portName, infoNewMacAddr }
	STATUS		current
	--&MESG "Port new MAC address: MacAddr=$4, portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"A new source MAC address has been detected on a switch port. This trap is only
			send for ports which have port-security enabled with the setting 
			autoAllowOneMacAddr, autoAllowTwoMacAddr or autoAllowThreeMacAddr."
	::= { bmTraps 3 }

portSecurityFailure NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName, infoSecurityFailMacAddr }
	STATUS		current
	--&MESG "Port security failure: MacAddr=$4, portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"An unauthorized source MAC address has accessed a port which has port-security
			enabled."
	::= { bmTraps 4 }

portErrorCountFailure NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName, portErrorCounter }
	STATUS		current
	--&MESG "Port error counter failure: Counter=$4, portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"The port error counter has incremented by 2 or more within a timewindow of
			two seconds. An counter increment by 1 ist not reported because single increments
			often may result because of link-changes."
	::= { bmTraps 5 }

switchMgmtAuthFailure NOTIFICATION-TYPE
	OBJECTS		{ infoUnauthIpAddr }
	STATUS		current
	--&MESG "Mgmt authentication failure: IP-Addr=$1"
        DESCRIPTION
			"A station has tried to access the switch management with a wrong 
			authentication. This includes wrong user/password for telnet, wrong
			community for SNMP read/write and wrong accessrights in the accesslist."
	::= { bmTraps 6 }

radiusMgmtAuthReject NOTIFICATION-TYPE
	OBJECTS		{ infoUnauthIpAddr }
	STATUS		current
	--&MESG "Radius mgmt authentication reject: IP-Addr=$1"
        DESCRIPTION
			"A station has tried to access the switch management with radius  
			authentication enabled and the radius server has rejected the request."
	::= { bmTraps 7 }

radiusPortSecurityReject NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName, infoSecurityFailMacAddr }
	STATUS		current
	--&MESG "Radius port security reject: MacAddr=$4, portIndex=$1, portDescr=$'2, portName=$'3"
        DESCRIPTION
			"A station has tried to access the switch with radius port security   
			authentication enabled and the radius server has rejected the request."
	::= { bmTraps 8 }

portLoopBcastFailure NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName}
	STATUS		current
	--&MESG "Port broadcast/multicast failure: portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"The port broadcast/multicast counter has incremented by 25 packets/second for 
			more then 10 successive seconds. Excessive multicast or broadcast packets may
			result in case of a loop between two port of the switch."
	::= { bmTraps 9 }

switchPoeVoltageFailure NOTIFICATION-TYPE
	OBJECTS		{ infoPoeInputVoltage}
	STATUS		current
	--&MESG "Switch PoE voltage failure: InputVoltage(V)=$1"
	DESCRIPTION	"The switch has detected a PoE over- or undervoltage conditions."
	::= { bmTraps 10 }

switchPoeOverloadFailure NOTIFICATION-TYPE
	OBJECTS		{ infoPoeInputPower}
	STATUS		current
	--&MESG "Switch PoE overload failure: InputPower(mW)=$1"
	DESCRIPTION	"The switch has detected a overload for the PoE power supply."
	::= { bmTraps 11 }

portPoeOverloadFailure NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName, portPoePower}
	STATUS		current
	--&MESG "Port PoE overload failure: PortPower(mW)=$4, portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"The switch has detected a PoE overload condition at the port."
	::= { bmTraps 12 }

portActiveLoopDetectionFailure NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName}
	STATUS		current
	--&MESG "Port active loop detection failure: portIndex=$1, portDescr=$'2, portName=$'3"
	DESCRIPTION	"The active loop protection has disabled the port."
	::= { bmTraps 13 }

switchIndustrialAlarmM1 NOTIFICATION-TYPE
	OBJECTS		{ infoAlarmStateM1, adminAlarmNameM1 }
	STATUS		current
	--&MESG "Industrial Alarm M1: State=$'1, Name=$'2"
        DESCRIPTION	"The alarm state of the industrial alarm output M1 has changed."
	::= { bmTraps 14 }

switchIndustrialAlarmM2 NOTIFICATION-TYPE
	OBJECTS		{ infoAlarmStateM2, adminAlarmNameM2 }
	STATUS		current
	--&MESG "Industrial Alarm M2: State=$'1, Name=$'2"
        DESCRIPTION	"The alarm state of the industrial alarm output M2 has changed."
	::= { bmTraps 15 }

switchInternalVoltageFailure NOTIFICATION-TYPE
	OBJECTS		{ infoPowerVoltage2500, infoPowerVoltage3300 }
	STATUS		current
	--&MESG "Internal Voltage Failure: Voltage-1(mV)=$1, Voltage-2(mV)=$2"
        DESCRIPTION	"The switch has detected a internal over- or undervoltage conditions."
	::= { bmTraps 16 }

tftpMessage NOTIFICATION-TYPE
	OBJECTS		{ infoLastTftpMessage }
	STATUS		current
	--&MESG "TFTP Message: $'1"
        DESCRIPTION	"An successful or failed TFTP transfer has been occured.
			 This does not include TFTP transfers executed from Nexan Manager."
	::= { bmTraps 17 }

sfpEvent NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName, infoLastSfpEventMessage }
	STATUS		current
	--&MESG "SFP Event: $'4, portIndex=$1, portDescr=$'2, portName=$'3"
        DESCRIPTION	"The switch has detected one of the following SFP events:
			- a SFP module has been inserted
			- a SFP module has been removed
			- the optical receive power has fallen below the configured threshold
			- the optical transmit power has fallen below the configured threshold
			- the laser bias current has exceeded the configured threshold
			In the case of a threshold event, the trap will only send out every
			five minutes."
	::= { bmTraps 18 }

clientRemoved NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName }
	STATUS		current
	--&MESG "Client Remove Alarm: portIndex=$1, portDescr=$'2, portName=$'3"
        DESCRIPTION	"The client on this port has been removed because the link down time
			 has exceeded the configured 'Link Down Timeout'."
	::= { bmTraps 19 }

internalMgmtWarning NOTIFICATION-TYPE
	OBJECTS		{ infoLastInternalMgmtWarning }
	STATUS		current
	--&MESG "$'1"
        DESCRIPTION	"An internal management warning has been detected. Please consult 
			 Nexans for further informations regarding the reported warning code."
	::= { bmTraps  20 }

switchFunctionInputAlarm NOTIFICATION-TYPE
	OBJECTS		{ infoFunctionInputStateF1, adminFunctionInputNameF1 }
	STATUS		current
	--&MESG "Function Input Alarm: F1-State=$'1, Name=$'2"
        DESCRIPTION	"The state of the function input has changed."
	::= { bmTraps 21 }

switchConfigurationChanged NOTIFICATION-TYPE
	OBJECTS		{ infoTotalConfigChanges }
	STATUS		current
	--&MESG "Configuration has been changed: Total-Configuration-Changes=$'1"
        DESCRIPTION	"The configuration of the switch has been changed."
	::= { bmTraps 22 }

portErrorDisabled NOTIFICATION-TYPE
	OBJECTS		{ portIndex, portDescr, portName, portAdminState }
	STATUS		current
	--&MESG "Port Error disabled: portAdminState=$'4, portIndex=$1, portDescr=$'2, portName=$'3"
        DESCRIPTION	"The port has been error disabled."
	::= { bmTraps 23 }

END