mibs/MIBS/nokia/ALCATEL-IND1-MAC-ADDRESS-MIB

954 lines
31 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-MAC-ADDRESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
OBJECT-IDENTITY,
NOTIFICATION-TYPE,
MODULE-IDENTITY,
Unsigned32 FROM SNMPv2-SMI
ifIndex FROM IF-MIB
MacAddress,
RowStatus,
DisplayString,
TEXTUAL-CONVENTION FROM SNMPv2-TC
dot1qVlanIndex FROM Q-BRIDGE-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
softentIND1MacAddress,
sourceLearningTraps FROM ALCATEL-IND1-BASE;
alcatelIND1MacAddressMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the MIB module for
address learning mac addresses entity.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The MIB module for Source Learning Mac Address entity."
::= { softentIND1MacAddress 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Hook into the Alcatel Tree
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1MacAddressMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Source Learning Module MIB Subsystem Managed Objects."
::= { alcatelIND1MacAddressMIB 1 }
alcatelIND1MacAddressMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Source Learning Module MIB Subsystem Conformance Information."
::= { alcatelIND1MacAddressMIB 2 }
alcatelIND1MacAddressMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Source Learning Module MIB Subsystem Units of Conformance."
::= { alcatelIND1MacAddressMIBConformance 1 }
alcatelIND1MacAddressMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for Source Learning Module MIB Subsystem Compliance Statements."
::= { alcatelIND1MacAddressMIBConformance 2 }
--
--textual conventions
--
MacAddressProtocolType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"Protocol value should be displayed in hex format"
SYNTAX INTEGER (0..2147483647)
--
-- Source Learning Common Definitions
--
-- --------------------------------------------------------------------------------------------
-- Following (slMacAddressTable) table is deprecated. The new table is "alaSlMacAddressGlobalTable".
-- This new table will handle both VLAN and VPLS domain MAC addresses.
-- The reason we keep this "slMacAddressTable" here is to be compatible with current
-- existing application, say OmniVista". At some point in the future this table will be removed.
-- --------------------------------------------------------------------------------------------
-- Source Learning MAC Address Table
-- The Static Unicast Database for Transparent VLAN Bridges.
-- Similar to the dot1qStaticUnicastTable of 802.1Q,
-- It mainly allows the user to configure static Unicast
-- MAC address.
slMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
in the MAC address table, and those dynamic learned addresses
which can be viewed and deleted."
::= { alcatelIND1MacAddressMIBObjects 1 }
slMacAddressEntry OBJECT-TYPE
SYNTAX SlMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defninition of the Mac Addresses entries for which the switch
has information.
For creation of a Mac Address, the following 6 fields in
slMacAddressEntry are required:
ifIndex
dot1qVlanIndex
slMacAddress
slMacAddressManagement
slMacAddressDisposition
slMacAddressStatus: must be set last
Dynamic mac addresses can not be created manually.
For deletion of a Mac Address, the following 4 fields in
slMacAddressEntry are required:
ifIndex
dot1qVlanIndex
slMacAddress
slMacAddressStatus: must be set last"
INDEX { ifIndex, dot1qVlanIndex, slMacAddress }
::= { slMacAddressTable 1 }
SlMacAddressEntry ::=
SEQUENCE {
slMacAddress
MacAddress,
slMacAddressManagement
INTEGER,
slMacAddressDisposition
INTEGER,
slMacAddressRowStatus
RowStatus,
slMacAddressProtocol
MacAddressProtocolType
}
slMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address for this entry."
::= { slMacAddressEntry 1 }
slMacAddressManagement OBJECT-TYPE
SYNTAX INTEGER {
permanent(1),
deleteOnReset(2),
deleteOnTimeout(3),
learned(4),
staticMulticast(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(3) - this entry is currently
in use and will remain so until it is aged
out.
learned(4) - this entry is currently in use
and will remain so until it is aged out.
staticMulticast(5) - this entry is only applicable
to multicast destination addresses"
DEFVAL { permanent }
::= { slMacAddressEntry 2 }
slMacAddressDisposition OBJECT-TYPE
SYNTAX INTEGER {
bridging(1),
filtering(2),
quarantined(3),
hostIntegrity(4),
userNetworkProf(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the disposition of the entry.
bridging(1) - this entry is currently in use
for bridging.
filtering(2) - this entry is currently in use
for filtering.
quarantined(3) - this entry is currently in use
for quarantined mac.
hostIntegrity check - the entry is currently under host integrity checking.
userNetworkProf - the entry is currently under user network profile Qos.
"
DEFVAL { bridging }
::= { slMacAddressEntry 3 }
slMacAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status for creating/deleting the mac address."
::= { slMacAddressEntry 4 }
slMacAddressProtocol OBJECT-TYPE
SYNTAX MacAddressProtocolType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the protocol associated with
a mac address."
::= { slMacAddressEntry 5 }
-- Layer 2 Mac Address Aging Mib Table
slMacAddressAgingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlMacAddressAgingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of the timeout for those learned mac addresses and
configured as deleted_on_timeout addresses."
::= { alcatelIND1MacAddressMIBObjects 2 }
slMacAddressAgingEntry OBJECT-TYPE
SYNTAX SlMacAddressAgingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the aging time for some specific vlan.
For creation of the aging time, If the vlan Id is specified, then
the aging time value will be applied to those mac addresses in
that vlan. Otherwise, the aging time will be applied to all of
the mac addresses throughout the vlans."
INDEX { dot1qVlanIndex }
::= { slMacAddressAgingTable 1 }
SlMacAddressAgingEntry ::=
SEQUENCE {
slMacAgingValue
INTEGER,
slMacAgingRowStatus
RowStatus
}
slMacAgingValue OBJECT-TYPE
SYNTAX INTEGER (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the value of mac address aging time."
DEFVAL { 300 }
::= { slMacAddressAgingEntry 1 }
slMacAgingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status for creating/deleting the aging time."
::= { slMacAddressAgingEntry 2 }
-- layer 2 PesudoCAM Trap elements ***********************
slPCamTrapObj OBJECT IDENTIFIER ::= { alcatelIND1MacAddressMIBObjects 3 }
slPCAMSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The slot number of this Coronado."
::= { slPCamTrapObj 1 }
slPCAMSliceNumber OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Slice Number of this Coronado."
::= { slPCamTrapObj 2 }
slPCAMStatus OBJECT-TYPE
SYNTAX INTEGER {
lowWaterMark(1),
highWaterMark(2),
floodWaterMark(3),
full(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The layer 2 pesudoCAM status of this Coronado."
::= { slPCamTrapObj 3 }
slMacToPortMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacToPortMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Mac To Port Binding Mac address."
::= { alcatelIND1MacAddressMIBObjects 4 }
slMacToPortMacEntry OBJECT-TYPE
SYNTAX MacToPortMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac To Port Binding Mac address entry."
INDEX { slMacToPortMacVlanId, slMacToPortMacAddress}
::= { slMacToPortMacTable 1 }
MacToPortMacEntry ::= SEQUENCE {
slMacToPortMacVlanId INTEGER,
slMacToPortMacAddress MacAddress,
slMacToPortMacRowStatus RowStatus
}
slMacToPortMacVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan Id in which the packet with this mac address is flooded"
::= { slMacToPortMacEntry 1 }
slMacToPortMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Mac address that is associated with the Mac To Port Binding."
::= { slMacToPortMacEntry 2 }
slMacToPortMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicate whether to add or delete the mac address"
::= { slMacToPortMacEntry 3 }
-- Layer 2 PesudoCAM Status Trap ***********************
slPCAMStatusTrap NOTIFICATION-TYPE
OBJECTS {
slPCAMSlotNumber,
slPCAMSliceNumber,
slPCAMStatus
}
STATUS current
DESCRIPTION
"Trap Status of Layer 2 pesudoCAM on this Coronado."
::= { sourceLearningTraps 0 1 }
-- BCM Table Hash Collision Traps *********************
bcmHashCollisionTrap NOTIFICATION-TYPE
OBJECTS {
bcmHashCollisionMac,
bcmHashCollisionSlot,
bcmHashCollisionPort,
bcmHashCollisionVlan,
bcmHashCollisionTable
}
STATUS current
DESCRIPTION
"Trap to notify the hash collision in BCM Table."
::= { sourceLearningTraps 0 3 }
-- HAL Table Hash Collision Trap *********************
halHashCollisionTrap NOTIFICATION-TYPE
OBJECTS {
halHashCollisionMac,
halHashCollisionSlot,
halHashCollisionPort,
halHashCollisionVlan,
halHashCollisionTable
}
STATUS current
DESCRIPTION
"Trap to notify the hash collision in BCM Table."
::= { sourceLearningTraps 0 4 }
-- Source Learning Global Configuration parameters
slDistributedMacMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Distributed MAC Mode.
When changed, the user must save the current
configuration and reboot the switch for change
to take effect."
DEFVAL { disable }
::= { alcatelIND1MacAddressMIBObjects 5 }
-- BCM Table Hash Collision Trap Parameters
bcmHashCollisionTrapObj OBJECT IDENTIFIER ::= { alcatelIND1MacAddressMIBObjects 6 }
-- MAC for which collision occured
bcmHashCollisionMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "MAC for which hash collision occured."
::= { bcmHashCollisionTrapObj 1 }
-- Hash Collision on slot
bcmHashCollisionSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Physical slot number on which the collision MAC is tried to add."
::= { bcmHashCollisionTrapObj 2 }
-- Hash Collision on port
bcmHashCollisionPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Physical port number on which the collision MAC is tried to add."
::= { bcmHashCollisionTrapObj 3 }
-- Hash Collision on vlan
bcmHashCollisionVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The Vlan Id on which the collision MAC is tried to add."
::= { bcmHashCollisionTrapObj 4 }
-- Hash Collision in Table
bcmHashCollisionTable OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The BCM Table in which the collision occurred."
::= { bcmHashCollisionTrapObj 5 }
-- HAL Table Hash Collision Trap Parameters
halHashCollisionTrapObj OBJECT IDENTIFIER ::= { alcatelIND1MacAddressMIBObjects 10 }
-- MAC for which collision occured
halHashCollisionMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "MAC for which hash collision occured."
::= { halHashCollisionTrapObj 1 }
-- Hash Collision on slot
halHashCollisionSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Physical slot number on which the collision MAC is tried to add."
::= { halHashCollisionTrapObj 2 }
-- Hash Collision on port
halHashCollisionPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Physical port number on which the collision MAC is tried to add."
::= { halHashCollisionTrapObj 3 }
-- Hash Collision on vlan
halHashCollisionVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The Vlan Id on which the collision MAC is tried to add."
::= { halHashCollisionTrapObj 4 }
-- Hash Collision in Table
halHashCollisionTable OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The BCM Table in which the collision occurred."
::= { halHashCollisionTrapObj 5 }
--layer 2 Mac Address Learning Table*********************
slMacLearningControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlMacLearningControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the control information about the mac learning on ports"
::= { alcatelIND1MacAddressMIBObjects 7}
slMacLearningControlEntry OBJECT-TYPE
SYNTAX SlMacLearningControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table provides the control information about the mac learning on ports"
INDEX { ifIndex }
::= { slMacLearningControlTable 1}
SlMacLearningControlEntry ::=
SEQUENCE {
slMacLearningControlStatus INTEGER
}
slMacLearningControlStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of mac learning on port."
DEFVAL { enabled }
::= { slMacLearningControlEntry 1}
-- ------------------------------------------------------------------------
-- Following table deprecates the original "slMacAddressTable", since it is
-- supports both VLAN and VPLS based MAC addresses.
-- ------------------------------------------------------------------------
alaSlMacAddressGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaSlMacAddressGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC addresses from both Vlan and VPLS domain.
This table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
in the MAC address table, and those dynamic learned addresses
which can be viewed and deleted."
::= { alcatelIND1MacAddressMIBObjects 8 }
alaSlMacAddressGlobalEntry OBJECT-TYPE
SYNTAX AlaSlMacAddressGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defninition of the Mac Addresses entries for which the switch
has information.
For creation of a Mac Address in VLAN domain, the following fields in
slMacAddressGlobalEntry are required:
slMacDomain
slOriginId - IfIndex
slServiceId - Vlan ID
slMacAddressGbl
slMacAddressGblManagement
slMacAddressGblDisposition
slMacAddressGblStatus: must be set last
Dynamic mac addresses can not be created manually.
For creation of Mac Address in VPLS domain, following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblStatus: must be set last
Dynamic mac addresses can not be created manually.
For deletion of a Mac Address in VLAN domain, the following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slOriginId - IfIndex
slServiceId - Vlan ID
slMacAddressGbl
slMacAddressGblManagement
slMacAddressGblStatus: must be set last
For deletion of a Mac Address in vpls based, following fileds in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblStatus: must be set last
"
INDEX {slMacDomain, slLocaleType, slOriginId, slServiceId, slSubId, slMacAddressGbl}
::= {alaSlMacAddressGlobalTable 1 }
AlaSlMacAddressGlobalEntry ::= SEQUENCE
{
slMacDomain INTEGER,
slLocaleType INTEGER,
slOriginId INTEGER,
slServiceId INTEGER,
slSubId INTEGER,
slMacAddressGbl MacAddress,
slMacAddressGblManagement INTEGER,
slMacAddressGblDisposition INTEGER,
slMacAddressGblRowStatus RowStatus,
slMacAddressGblProtocol MacAddressProtocolType
}
slMacDomain OBJECT-TYPE
SYNTAX INTEGER {
all(0),
vlan(1),
vpls(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates whether this MAC is learned on Vlan domain or vpls domain"
DEFVAL { all }
::= {alaSlMacAddressGlobalEntry 1 }
slLocaleType OBJECT-TYPE
SYNTAX INTEGER {
default(0),
sap(1),
sBind(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This field is used only for VPLS, It defaults to default for vlan domain MACs"
DEFVAL { default }
::= {alaSlMacAddressGlobalEntry 2}
slOriginId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This should be ifIndex for Vlan domain MAC;
ifIndex for SAP of VPLS domain MAC;
SDP_ID for sBind of VPLS domain MAC"
::= {alaSlMacAddressGlobalEntry 3}
slServiceId OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Depending on the domain type, Vlan based or VPLS based.
If Vlan based learning, then this field holds the Vlan ID.
If VPLS based learning, then this field holds the VPLS Service ID"
::= {alaSlMacAddressGlobalEntry 4 }
slSubId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object is only meaningful in VPLS domain.
If SAP, this is the encapsulation ID;
If sBind, this is the vcID,
This value will be default to -0- in VLAN domain"
::= {alaSlMacAddressGlobalEntry 5}
slMacAddressGbl OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address for this entry."
::= {alaSlMacAddressGlobalEntry 6 }
slMacAddressGblManagement OBJECT-TYPE
SYNTAX INTEGER {
permanent(1),
deleteOnReset(2),
deleteOnTimeout(3),
learned(4),
staticMulticast(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(3) - this entry is currently
in use and will remain so until it is aged
out.
learned(4) - this entry is currently in use
and will remain so until it is aged out.
staticMulticast(5) - this entry is only applicable
to multicast destination addresses"
DEFVAL { permanent }
::= {alaSlMacAddressGlobalEntry 7 }
slMacAddressGblDisposition OBJECT-TYPE
SYNTAX INTEGER {
bridging(1),
filtering(2),
quarantined(3),
hostIntegrity(4),
userNetworkProf(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the disposition of the entry.
bridging(1) - this entry is currently in use for bridging.
filtering(2) - this entry is currently in use for filtering.
quarantined(3) - this entry is currently in use for quarantined mac.
hostIntegritycheck(4) - the entry is currently under host integrity checking.
userNetworkProf(5) - the entry is currently under user network profile Qos.
"
DEFVAL { bridging }
::= {alaSlMacAddressGlobalEntry 8 }
slMacAddressGblRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for creating/deleting the mac address."
::= {alaSlMacAddressGlobalEntry 9 }
slMacAddressGblProtocol OBJECT-TYPE
SYNTAX MacAddressProtocolType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the protocol associated with
a mac address."
::= {alaSlMacAddressGlobalEntry 10}
-- ------------------------------------------------------------------------
-- Following table provides number of MAC addresses count for
-- VPLS based MAC addresses currently in CMM FDB.
-- ------------------------------------------------------------------------
--
-- slMacAddrCountInfoTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SlMacAddrCountInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Definition of the Mac Addresses count for VPLS MAC addresses"
-- ::= {alcatelIND1MacAddressMIBObjects 9 }
--
--slMacAddrCountInfoEntry OBJECT-TYPE
-- SYNTAX SlMacAddrCountInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Definition of the Mac Addresses count for VPLS MAC addresses"
-- AUGMENTS {slMacAddressGlobalEntry}
-- ::= {slMacAddrCountInfoTable 1}
--
--SlMacAddrCountInfoEntry ::= SEQUENCE
--{
-- slStaticMacCount INTEGER,
-- slDynamicMacCount INTEGER
--}
--
--slStaticMacCount OBJECT-TYPE
-- SYNTAX INTEGER (1..2147483647)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object contains the MAC address count for Static configured MACs"
-- ::= {slMacAddrCountInfoEntry 1 }
--
--slDynamicMacCount OBJECT-TYPE
-- SYNTAX INTEGER (1..2147483647)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object contains the MAC address count for dynamic learned MACs"
-- ::= {slMacAddrCountInfoEntry 2 }
--
--
--
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1MacAddressMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for source learning."
MODULE
MANDATORY-GROUPS
{
slMacAddressGroup,
slMacAgingGroup,
slPCamNotificationGroup,
slMacGeneralGroup,
slMacLearningGroup
}
::= { alcatelIND1MacAddressMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
slMacAddressGroup OBJECT-GROUP
OBJECTS
{
slMacAddress,
slMacAddressManagement,
slMacAddressDisposition,
slMacAddressRowStatus,
slMacAddressProtocol
}
STATUS current
DESCRIPTION
"Collection of objects for management of source learning Mac addresses."
::= { alcatelIND1MacAddressMIBGroups 1 }
slMacAgingGroup OBJECT-GROUP
OBJECTS
{
slMacAgingValue,
slMacAgingRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of source learning Mac addresses aging-time."
::= { alcatelIND1MacAddressMIBGroups 2 }
slPCamNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
slPCAMStatusTrap
}
STATUS current
DESCRIPTION
"Collection of notification of signaling Pesudo CAM event."
::= { alcatelIND1MacAddressMIBGroups 3 }
slMacGeneralGroup OBJECT-GROUP
OBJECTS
{
slDistributedMacMode
}
STATUS current
DESCRIPTION
"Collection of general sl objects."
::= { alcatelIND1MacAddressMIBGroups 4 }
slMacLearningGroup OBJECT-GROUP
OBJECTS
{
slMacLearningControlStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of enabling or disabling source learning on the ports."
::= { alcatelIND1MacAddressMIBGroups 5 }
-- END ***********************
END