mibs/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-VRTR-MIB

11558 lines
423 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-TIMETRA-VRTR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32, IpAddress, TimeTicks,
Integer32, Gauge32, Counter32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION, DisplayString,
RowStatus, TruthValue, MacAddress,
TimeStamp, TestAndIncr FROM SNMPv2-TC
InetAddress, InetAddressType,
InetAddressPrefixLength,
InetAddressIPv6z,
InetAddressIPv6 FROM INET-ADDRESS-MIB
InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB
-- ALACTEL CHANG
-- ipCidrRouteEntry, inetCidrRouteEntry FROM IP-FORWARD-MIB
ipCidrRouteEntry FROM IP-FORWARD-MIB
-- ^^^^^^^^^^^^^^^^^^^
-- ALACTEL CHANG
-- ALCATEL CHANG
-- ipNetToMediaEntry, ipNetToPhysicalEntry FROM IP-MIB
ipNetToMediaEntry FROM IP-MIB
-- ^^^^^^^^^^^^^^^^^^^^^
-- ALCATEL CHANG
TmnxVRtrID, IpAddressPrefixLength,
TmnxBgpAutonomousSystem,
TmnxVRtrIDOrZero,
TmnxAdminState, TmnxOperState,
TmnxStatus, TmnxPortID, TmnxEncapVal,
TNamedItem, TNamedItemOrEmpty,
TItemDescription,
TItemLongDescription,
TmnxServId, TmnxCustId,
TmnxTunnelType, TmnxTunnelID,
TPolicyStatementNameOrEmpty,
TmnxVPNRouteDistinguisher,
TCpmProtPolicyID, TDSCPValue,
TDSCPValueOrNone, TFCType,
TmnxDHCP6MsgType, Dot1PPriority FROM ALCATEL-IND1-TIMETRA-TC-MIB
timetraSRMIBModules, tmnxSRObjs,
tmnxSRNotifyPrefix, tmnxSRConfs FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB
TNetworkPolicyID FROM ALCATEL-IND1-TIMETRA-QOS-MIB
TIPFilterID, TFilterID FROM ALCATEL-IND1-TIMETRA-FILTER-MIB
TmnxSlotNum FROM ALCATEL-IND1-TIMETRA-CHASSIS-MIB
tmnxPortNotifyPortId, tmnxPortType FROM ALCATEL-IND1-TIMETRA-PORT-MIB
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpClientLease FROM ALCATEL-IND1-TIMETRA-SERV-MIB
sapPortId, sapEncapValue FROM ALCATEL-IND1-TIMETRA-SAP-MIB
;
timetraVRtrMIBModule MODULE-IDENTITY
LAST-UPDATED "0801010000Z"
ORGANIZATION "Alcatel"
CONTACT-INFO
"Alcatel 7x50 Support
Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision
the Alcatel 7x50 device transport and virtual routers, their
interfaces, and other related features.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition
that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's
proprietary intellectual property. Alcatel retains all title
and ownership in the Specification, including any revisions.
Alcatel grants all interested parties a non-exclusive license
to use and distribute an unmodified copy of this Specification
in connection with management of Alcatel products, and without
fee, provided this copyright notice and license appear on all
copies.
This Specification is supplied `as is', and Alcatel makes no
warranty, either express or implied, as to the use, operation,
condition, or performance of the Specification."
--
-- Revision History
--
REVISION "0801010000Z"
DESCRIPTION "Rev 6.0 01 Jan 2008 00:00
6.0 release of the TIMETRA-VRTR-MIB."
REVISION "0701010000Z"
DESCRIPTION "Rev 5.0 01 Jan 2007 00:00
5.0 release of the TIMETRA-VRTR-MIB."
REVISION "0602280000Z"
DESCRIPTION "Rev 4.0 28 Feb 2006 00:00
4.0 release of the TIMETRA-VRTR-MIB."
REVISION "0508310000Z"
DESCRIPTION "Rev 3.0 31 Aug 2005 00:00
3.0 release of the TIMETRA-VRTR-MIB."
REVISION "0501240000Z"
DESCRIPTION "Rev 2.1 24 Jan 2005 00:00
2.1 release of the TIMETRA-VRTR-MIB."
REVISION "0401150000Z"
DESCRIPTION "Rev 2.0 15 Jan 2004 00:00
2.0 release of the TIMETRA-VRTR-MIB."
REVISION "0308150000Z"
DESCRIPTION "Rev 1.2 15 Aug 2003 00:00
1.2 release of the TIMETRA-VRTR-MIB."
REVISION "0301200000Z"
DESCRIPTION "Rev 1.0 20 Jan 2003 00:00
1.0 Release of the TIMETRA-VRTR-MIB."
REVISION "0008140000Z"
DESCRIPTION "Rev 0.1 14 Aug 2000 00:00
Initial version of the TIMETRA-VRTR-MIB."
::= { timetraSRMIBModules 3 }
tmnxVRtrObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 3 }
tmnxVRtrConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 3 }
tmnxVRtrNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 3}
tmnxVRtrNotifications OBJECT IDENTIFIER ::= { tmnxVRtrNotifyPrefix 0 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- ALCATEL-IND1-TIMETRA-VRTR-MIB textual conventions
--
TmnxVPNId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The purpose of a VPN-ID is to identify a VPN.
The global VPN Identifier format is:
3-octet VPN Authority, organizationally unique ID followed by a
4-octet VPN index identifying the VPN according to OUI."
REFERENCE
"RFC 2685, Fox & Gleeson, 'Virtual Private Networks Identifier',
September 1999."
SYNTAX OCTET STRING (SIZE (0..7))
TmnxInetAddrState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The TmnxInetAddrState is the state of an ipv6 address."
SYNTAX INTEGER {
unknown (0),
tentative (1),
duplicated (2),
inaccessible (3),
deprecated (4),
preferred (5)
}
TDSCPAppId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DSCP Application identifiers for protocols that generate control traffic
on the the Alcatel 7x50 SR router."
SYNTAX INTEGER {
bgp (1),
cflowd (2),
dhcp (3),
dns (4),
ftp (5),
icmp (6),
igmp (7),
ldp (8),
mld (9),
msdp (10),
ndis (11),
ntp (12),
ospf (13),
pim (14),
radius (15),
rip (16),
rsvp (17),
snmp (18),
snmp-notification (19),
srrp (20),
ssh (21),
syslog (22),
tacplus (23),
telnet (24),
tftp (25),
traceroute (26),
vrrp (27)
}
TDot1pAppId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IEEE 802.1p priority (Dot1p) Application identifiers for Layer-2
protocols that generate control traffic on the the Alcatel
7x50 SR router."
SYNTAX INTEGER {
arp (1),
isis (2),
pppoe (3)
}
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- The ALcatel 7x50 SR series Virtual Router Group
--
--
-- Virtual Router Table
--
tmnxVRtrGlobalObjs OBJECT IDENTIFIER ::= { tmnxVRtrObjs 15 }
vRtrNextVRtrID OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vRtrNextVRtrID object is used to assign values to vRtrID
to be used to create a new row in the vRtrConfTable as described
in 'Textual Conventions for SNMPv2'. The network manager reads
the object, and then writes the value back in the SET request
that creates a new instance of vRtrConfEntry. If the SET fails
with the code 'inconsistentValue', then the process must be
repeated. If the the SET succeeds, then the object is
incremented and the new instance is created according to the
manager's directions."
::= { tmnxVRtrGlobalObjs 1 }
vRtrConfiguredVRtrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrConfiguredVRtrs indicates the current number of
virtual routers configured in the system and represented as rows
in the vRtrConfTable."
::= { tmnxVRtrGlobalObjs 2 }
vRtrActiveVRtrs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrActiveVRtrs indicates the current number of virtual
routers in the system with vRtrAdminStatus equal 'inService'."
::= { tmnxVRtrGlobalObjs 3 }
vRtrRouteThresholdSoakTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Following the generation of a tmnxVRtrHighRouteTCA notification, the
value of vRtrRouteThresholdSoakTime indicates the soak interval in
seconds before another tmnxVRtrHighRouteTCA notification will be
re-issued. Imposing this soak period prevents continuous generation of
notifications by the agent in the event that routes are continually
added to a VRF after it has reached its maximum capacity. When this
object has a value of 0, it indicates that the agent should issue a
single notification at the time that the value of
vRtrHighRouteThreshold is exceeded and another notification should not
be sent until the number of routes has fallen below the value
configured in vRtrMidRouteThreshold."
DEFVAL { 600 } -- 10 minutes
::= { tmnxVRtrGlobalObjs 4 }
vRtrMaxARPEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrMaxARPEntries indicates the maximum number of active
and inactive ARP entries supported across all virtual routers
in the system."
::= { tmnxVRtrGlobalObjs 5 }
vRtrIPv6RouteThresholdSoakTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of object vRtrIPv6RouteThresholdSoakTime specifies
the soak interval in seconds before another
tmnxVRtrIPv6HighRouteTCA notification will be re-issued,
after the generation of a tmnxVRtrIPv6HighRouteTCA notification.
Imposing this soak period prevents continuous generation of
notifications by the agent, in the event that routes are continually
added to a VRF after it has reached its maximum capacity.
When this object has a value of 0, it indicates that the agent should
issue a single notification at the time that the value of
vRtrIPv6HighRouteThreshold is exceeded and another notification should
not be sent until the number of routes has fallen below the value
configured in vRtrIPv6MidRouteThreshold."
DEFVAL { 600 } -- 10 minutes
::= { tmnxVRtrGlobalObjs 6 }
vRtrConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrConfTable has an entry for each virtual router configured
in the system."
::= { tmnxVRtrObjs 1 }
vRtrConfEntry OBJECT-TYPE
SYNTAX VRtrConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a virtual router in the system. Entries can
be created and deleted via SNMP SET operations. Creation requires a
SET request containing vRtrRowStatus, vRtrName and vRtrType.
Note that rows in this table are usually created by the agent itself
as a side affect of some other configuration; for example, when a
service vprn is created by setting the appropriate objects in the
ALCATEL-IND1-TIMETRA-SERV-MIB.
There will always be at least two row entries in this table, one of
these entries represents the base or transport router and the other
represents the management router. These entries are created when the
system is initialized and can never be deleted."
INDEX { vRtrID }
::= { vRtrConfTable 1 }
VRtrConfEntry ::=
SEQUENCE {
vRtrID TmnxVRtrID,
vRtrRowStatus RowStatus,
vRtrAdminState TmnxAdminState,
vRtrName TNamedItemOrEmpty,
vRtrMaxNumRoutes Integer32,
vRtrBgpStatus TmnxStatus,
vRtrMplsStatus TmnxStatus,
vRtrOspfStatus TmnxStatus,
vRtrRipStatus TmnxStatus,
vRtrRsvpStatus TmnxStatus,
vRtrEcmpMaxRoutes Unsigned32,
vRtrAS TmnxBgpAutonomousSystem,
vRtrNewIfIndex TestAndIncr,
vRtrLdpStatus TmnxStatus,
vRtrIsIsStatus TmnxStatus,
vRtrRouterId IpAddress,
vRtrTriggeredPolicy TruthValue,
vRtrConfederationAS TmnxBgpAutonomousSystem,
vRtrRouteDistinguisher TmnxVPNRouteDistinguisher,
vRtrMidRouteThreshold Unsigned32,
vRtrHighRouteThreshold Unsigned32,
vRtrIllegalLabelThreshold Unsigned32,
vRtrVpnId TmnxVPNId,
vRtrDescription TItemDescription,
vRtrGracefulRestart TruthValue,
vRtrGracefulRestartType INTEGER,
vRtrType INTEGER,
vRtrServiceId TmnxServId,
vRtrCustId TmnxCustId,
vRtrIgmpStatus TmnxStatus,
vRtrMaxNumRoutesLogOnly TruthValue,
vRtrVrfTarget TNamedItemOrEmpty,
vRtrVrfExportTarget TNamedItemOrEmpty,
vRtrVrfImportTarget TNamedItemOrEmpty,
vRtrPimStatus TmnxStatus,
vRtrMaxMcastNumRoutes Integer32,
vRtrMaxMcastNumRoutesLogOnly TruthValue,
vRtrMcastMidRouteThreshold Unsigned32,
vRtrIgnoreIcmpRedirect TruthValue,
vRtrOspfv3Status TmnxStatus,
vRtrMsdpStatus TmnxStatus,
vRtrVprnType INTEGER,
vRtrSecondaryVrfId TmnxVRtrIDOrZero,
vRtrMldStatus TmnxStatus,
vRtrIPv6MaxNumRoutes Integer32,
vRtrIPv6MidRouteThreshold Unsigned32,
vRtrIPv6HighRouteThreshold Unsigned32,
vRtrIPv6MaxNumRoutesLogOnly TruthValue,
vRtrIPv6IgnoreIcmpRedirect TruthValue,
vRtrMcPathMgmtPlcyName TNamedItem
}
vRtrID OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique value which identifies this virtual router in the Tmnx
system. The vRtrID value for each virtual router must remain
constant at least from one re-initialization of the system
management processor (CPM) to the next. There will always be at
least one router entry defined by the agent with vRtrID=1 which
represents the transport router."
::= { vRtrConfEntry 1 }
vRtrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status. The creation or deletion of a virtual router entry
causes creation or deletion of corresponding entries in other Tmnx
MIB tables with the same vRtrID value. Note that it is not allowed
to 'destroy' the row entry for vRtrID = 1.
In order for row creation to succeed, values for vRtrName and
vRtrType must be included in the same SNMP SET PDU as
vRtrRowStatus."
::= { vRtrConfEntry 2 }
vRtrAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state for this virtual router.
Note that it is not allowed to set vRtrAdminState to 'outOfService
for the row entry with vRtrID = 1."
DEFVAL { outOfService }
::= { vRtrConfEntry 3 }
vRtrName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administritive name for this virtual router. The router
name must be unique among all virtual routers in the system.
When a row is created in the vRtrConfTable for a service vprn,
the agent assigns the name 'VR-<service-id>'. Note that for
row creation to succeed, a value must be specified for vRtrName."
::= { vRtrConfEntry 4 }
vRtrMaxNumRoutes OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of routes that can be configured on
this virtual router. If the value is -1, then there
is no limit."
DEFVAL { -1 }
::= { vRtrConfEntry 5 }
vRtrBgpStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for BGP on this virtual router. An attempt
to set vRtrBgpStatus to 'delete' will fail if the BGP protocol
is not in the administrative outOfService state."
DEFVAL { delete }
::= { vRtrConfEntry 6 }
vRtrMplsStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for MPLS on this virtual router. An attempt
to set vRtrMplsStatus to 'delete' will fail if the MPLS
protocol is not in the administrative outOfService state,
i.e. ALCATEL-IND1-TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be
set to 'outOfService'."
DEFVAL { delete }
::= { vRtrConfEntry 7 }
vRtrOspfStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The desired state for OSPFv2 on this virtual router. An attempt
to set vRtrOspfStatus to 'delete' will fail if the OSPFv2
protocol is not in the administrative outOfService state,
i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set
to 'disabled'.
This object was obsoleted in release 5.0."
DEFVAL { delete }
::= { vRtrConfEntry 8 }
vRtrRipStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for RIP on this virtual router. An attempt
to set vRtrRipStatus to 'delete' will fail if the RIP
protocol is not in the admininistrative outOfService state."
DEFVAL { delete }
::= { vRtrConfEntry 9 }
vRtrRsvpStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for RSVP on this virtual router. An attempt
to set vRtrRsvpStatus to 'delete' will fail if the RSVP
protocol is not in the administrative outOfService state,
i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set
to 'outOfService'."
DEFVAL { delete }
::= { vRtrConfEntry 10 }
vRtrEcmpMaxRoutes OBJECT-TYPE
SYNTAX Unsigned32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrEcmpMaxRoutes specifies the maximum number
of equal cost routes allowed on this routing table instance.
When the number ecmp routes available at the best preference
value exceed the number of vRtrEcmpMaxRoutes allowed, then
the lowest next-hop IP address algorithm is used to select
the ecmp routes used.
When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes
are available with the same best preference value and equal
cost values, then the route with the lowest next-hop IP address
is used."
DEFVAL { 1 }
::= { vRtrConfEntry 11 }
vRtrAS OBJECT-TYPE
SYNTAX TmnxBgpAutonomousSystem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrAS specifies the autonomous system number to be
advertised to this peer. This object is MUST be set before BGP
can be activated."
REFERENCE ""
DEFVAL { 0 }
::= { vRtrConfEntry 12 }
vRtrNewIfIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to assign values to vRtrIfIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in the SET request that creates a new instance of vRtrIfEntry.
If the SET fails with the code 'inconsistentValue', then
the process must be repeated. If the the SET succeeds, then
the object is incremented and the new instance is created
according to the manager's directions."
::= { vRtrConfEntry 13 }
vRtrLdpStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for LDP on this virtual router. An attempt
to set vRtrLdpStatus to 'delete' will fail if the LDP
protocol is not in the administrative outOfService state,
i.e. ALCATEL-IND1-TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set
to 'outOfService'."
DEFVAL { delete }
::= { vRtrConfEntry 14 }
vRtrIsIsStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for ISIS on this virtual router. An attempt
to set vRtrIsIsStatus to 'delete' will fail if the ISIS
protocol is not in the administrative outOfService state."
DEFVAL { delete }
::= { vRtrConfEntry 15 }
vRtrRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the router in the
Autonomous System. By convention, to ensure uniqueness, this
should default to the value of one of the router's IP interface
addresses."
::= { vRtrConfEntry 16 }
vRtrTriggeredPolicy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrTriggeredPolicy is 'false', all routing
protocols automatically reevaluate their routes when the route
policies are changed. If this value is 'true', then the user
must trigger the recalculation of routes when the route policies
are changed."
DEFVAL { false }
::= { vRtrConfEntry 17 }
vRtrConfederationAS OBJECT-TYPE
SYNTAX TmnxBgpAutonomousSystem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrConfederationAS specifies the confederation AS
number for the virtual router. A value of 0 means no confederation
AS."
DEFVAL { 0 }
::= { vRtrConfEntry 18 }
vRtrRouteDistinguisher OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrRouteDistinguisher is an identifier attached to
routes that distinguishes to which VPN it belongs. The VPRN
cannot be operationally 'inService' until a route distinguisher
has been assigned."
DEFVAL { '0000000000000000'H }
::= { vRtrConfEntry 19 }
vRtrMidRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMidRouteThreshold specifies the mid-level
water marker for the number of routes which this VRF may hold.
When this limit is exceeded a tmnxVRtrMidRouteTCA
notification is generated.
A value of 0 (zero) for this object indicates that the threshold
is infinite, and the notification will never be sent."
DEFVAL { 0 }
::= { vRtrConfEntry 20 }
vRtrHighRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrHighRouteThreshold specifies the high-level
water marker for the number of routes which this VRF may hold.
When this limit is exceeded a tmnxVRtrHighRouteTCA
notification is generated.
A value of 0 (zero) for this object indicates that the threshold
is infinite, and the notification will never be sent."
::= { vRtrConfEntry 21 }
vRtrIllegalLabelThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIllegalLabelThreshold specifies the
allowed limit for illegal label violations on this VRF.
When this limit is exceeded a tmnxVRtrIllegalLabelTCA
notification is generated.
A value of 0 (zero) for this object indicates that the threshold
is infinite, and the notification will never be sent."
DEFVAL { 0 }
::= { vRtrConfEntry 22 }
vRtrVpnId OBJECT-TYPE
SYNTAX TmnxVPNId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrVpnId is the Virtual Private Network Identifier
of this virtual router."
DEFVAL { ''H } -- the empty string
::= { vRtrConfEntry 23 }
vRtrDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrDescription is a user provided description
string for this virtual router. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length."
DEFVAL { ''H } -- the empty string
::= { vRtrConfEntry 25 }
vRtrGracefulRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrGracefulRestart indicates whether or not
graceful restart capabilities are enabled on this virtual
router. In order for any protocol to perform graceful
restart vRtrGracefulRestart must have a value of 'true'.
Graceful restart capabilities can then be enabled or disabled
on an individual protocol basis."
DEFVAL { false }
::= { vRtrConfEntry 26 }
vRtrGracefulRestartType OBJECT-TYPE
SYNTAX INTEGER {
never (0),
manual (1),
automatic (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrGracefulRestartType specifies when to include
grace restart of routing protocols as a result of a switchover
from primary CPM in a redundant system.
'never' - always switch without graceful restart
'manual' - perform graceful restart only on a forced switchover
'automatic' - perform graceful restart on either a switchover
caused by an error or a forced switchover"
DEFVAL { never }
::= { vRtrConfEntry 27 }
vRtrType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
baseRouter (1),
vprn (2),
vr (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrType specifies the type of virtual router
represented by this row entry. When a row is created in this
table using 'createAndGo', vRtrType must be specified or the
row creation will fail.
Only the value of 'vr (3)' can be set with a SNMP SET request.
The other values are used for row entries created internally by
the agent.
The value of vRtrType cannot be modified if vRtrRowStatus has
a value of 'active'."
::= { vRtrConfEntry 28 }
vRtrServiceId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When vRtrType has a value of 'vprn', the value of vRtrServiceId
indicates the service-id of the associated service that created
this row entry."
::= { vRtrConfEntry 29 }
vRtrCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When vRtrType has a value of 'vprn', the value of vRtrCustId
indicates the customer-id of the associated service that created
this row entry."
::= { vRtrConfEntry 30 }
vRtrIgmpStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for IGMP on this virtual router. An attempt
to set vRtrIgmpStatus to 'delete' will fail if the IGMP
protocol is not in the administrative outOfService state,
i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to
'outOfService'."
DEFVAL { delete }
::= { vRtrConfEntry 31 }
vRtrMaxNumRoutesLogOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMaxNumRoutesLogOnly specifies the action to
be taken when the maximum number of routes that can be held
within a given VRF context is reached. If the value is 'true'
the event is logged (a trap is sent) and the learning of
new routes is not disabled. If the value is 'false' the event
is logged and the learning of new routes is disabled."
DEFVAL { false }
::= { vRtrConfEntry 32 }
vRtrVrfTarget OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrVrfTarget specifies the extended community
name for the default vrf-import or vrf-export policy to use for
the vRtrID if no entries are configured in the vRtrPolicyTable for
this vRtrID instance.
This object can not be set if either vRtrVrfExportTarget or
vRtrVrfImportTarget has been set."
::= { vRtrConfEntry 33 }
vRtrVrfExportTarget OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrVrfExportTarget specifies the extended community
name for the default vrf-export policy to use for the vRtrID if no
entries are configured in the vRtrPolicyTable for this vRtrID
instance.
This object can not be set if vRtrVrfTarget has been set."
::= { vRtrConfEntry 34 }
vRtrVrfImportTarget OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrVrfImportTarget specifies the extended community
name for the default vrf-import policy to use for the vRtrID if no
entries are configured in the vRtrPolicyTable for this vRtrID
instance.
This object can not be set if vRtrVrfTarget has been set."
::= { vRtrConfEntry 35 }
vRtrPimStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for PIM on this virtual router. When the object
is set to 'create', PIM protocol instance is enabled on the
virtual router. Setting the value to 'delete' disables PIM on the
virtual router."
DEFVAL { delete }
::= { vRtrConfEntry 36 }
vRtrMaxMcastNumRoutes OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of multicast routes that can be configured on
this virtual router. If the value is -1, then there
is no limit."
DEFVAL { -1 }
::= { vRtrConfEntry 37 }
vRtrMaxMcastNumRoutesLogOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to
be taken when the maximum number of multicast routes that can be held
within a given VRF context is reached. If the value is 'true'
the event is logged (a trap is sent) and the learning of
new multicast routes is not disabled. If the value is 'false' the
event is logged and the learning of new routes is disabled."
DEFVAL { false }
::= { vRtrConfEntry 38 }
vRtrMcastMidRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMcastMidRouteThreshold specifies the mid-level
water marker for the number of multicast routes which this VRF may
hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA
notification is generated.
A value of 0 (zero) for this object indicates that the threshold
is infinite, and the notification will never be sent."
DEFVAL { 0 }
::= { vRtrConfEntry 39 }
vRtrIgnoreIcmpRedirect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual
router will drop all ICMP Redirects received on the management
interface. If the value of vRtrIgnoreIcmpRedirect is 'false'
and an ICMP Redirect is received on the management interface,
a /32 route will be created in the route table.
If the value of vRtrName is not 'management', an SNMP set
request to vRtrIgnoreIcmpRedirect will fail with an
'inconsistentValue' error."
DEFVAL { true }
::= { vRtrConfEntry 40 }
vRtrOspfv3Status OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The desired state for OSPFv3 on this virtual router. An attempt
to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3
protocol is not in the administrative outOfService state,
i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set
to 'disabled'.
This object was obsoleted in release 5.0."
DEFVAL { delete }
::= { vRtrConfEntry 41 }
vRtrMsdpStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for Msdp on this virtual router. An attempt
to set vRtrMsdpStatus to 'delete' will fail if the Msdp
protocol is not in the administrative outOfService state,
i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be
set to 'outOfService'."
DEFVAL { delete }
::= { vRtrConfEntry 42 }
vRtrVprnType OBJECT-TYPE
SYNTAX INTEGER {
regular (1),
hub (2),
spoke (3),
subscriberSplitHorizon (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrVprnType specifies how traffic is routed.
regular (1) - All traffic is routed to all
destinations.
hub (2) - Network traffic is routed only to
the access side. Access traffic is
routed to all destinations.
spoke (3) - Networks traffic is routed to all
destinations. Access traffic is
routed only to the network side.
subscriberSplitHorizon (4) - Subscriber-interface traffic is
routed only to the network side.
All other traffic is routed to
all destinations.
This object cannot be modified if vRtrType is not 'vprn'."
DEFVAL { regular }
::= { vRtrConfEntry 43 }
vRtrSecondaryVrfId OBJECT-TYPE
SYNTAX TmnxVRtrIDOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id
for hub and spoke vprn.
Non-zero value of vRtrSecondaryVrfId indicates that two
route-tables exist for hub and spoke vprn system one each for hub and
spoke. One of which is indexed by vRtrSecondaryVrfId.
If the value of vRtrSecondaryVrfId is zero, it indicates that
there is only one route-table for hub and spoke vprn system."
::= { vRtrConfEntry 44 }
vRtrMldStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state for Multicast Listener Discovery (MLD) Protocol
on this virtual router. An attempt to set vRtrMldStatus to 'delete'
will fail if the MLD protocol is not in the administrative
outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState
must be set to 'outOfService'."
DEFVAL { delete }
::= { vRtrConfEntry 45 }
vRtrIPv6MaxNumRoutes OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of IPv6 routes that can be configured on
this virtual router. If the value is -1, then there
is no limit.
This object is not supported on SR-1, where the value of
ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'."
DEFVAL { -1 }
::= { vRtrConfEntry 46 }
vRtrIPv6MidRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIPv6MidRouteThreshold specifies the mid-level
water marker for the number of IPv6 routes which this VRF may hold.
When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA
notification is generated.
A value of 0 (zero) for this object indicates that the threshold
is infinite, and the notification will never be sent."
DEFVAL { 0 }
::= { vRtrConfEntry 47 }
vRtrIPv6HighRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIPv6HighRouteThreshold specifies the high-level
water marker for the number of IPv6 routes which this VRF may hold.
When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA
notification is generated.
A value of 0 (zero) for this object indicates that the threshold
is infinite, and the notification will never be sent."
::= { vRtrConfEntry 48 }
vRtrIPv6MaxNumRoutesLogOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to
be taken when the maximum number of IPv6 routes that can be held
within a given VRF context is reached. If the value is 'true'
the event is logged (a trap is sent) and the learning of
new routes is not disabled. If the value is 'false' the event
is logged and the learning of new routes is disabled."
DEFVAL { false }
::= { vRtrConfEntry 49 }
vRtrIPv6IgnoreIcmpRedirect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual
router will drop all IPv6 ICMP Redirects received on the management
interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false'
and an IPv6 ICMP Redirect is received on the management interface,
a /128 route will be created in the route table.
If the value of vRtrName is not 'management', an SNMP set
request to vRtrIPv6IgnoreIcmpRedirect will fail with an
'inconsistentValue' error."
DEFVAL { true }
::= { vRtrConfEntry 50 }
vRtrMcPathMgmtPlcyName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrMcPathMgmtPlcyName specifies the multicast policy
name configured on this virtual router."
DEFVAL { "default" }
::= { vRtrConfEntry 51 }
--
-- Alcatel 7x50 SR series Virtual Router Policy Table
--
-- Augmentation of the vRtrTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
-- the base table, vRtrTable, and the augmenting table, vRtrPolicyTable.
-- This in effect extends the vRtrTable with additional columns.
-- Creation (or deletion) of a row in the vRtrTable results in the same
-- fate for the row in the vRtrPolicyTable.
--
vRtrPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrPolicyTable has an entry for each virtual router configured
in the system."
::= { tmnxVRtrObjs 16 }
vRtrPolicyEntry OBJECT-TYPE
SYNTAX VRtrPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for a
virtual router in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrConfEntry }
::= { vRtrPolicyTable 1 }
VRtrPolicyEntry ::=
SEQUENCE {
vRtrImportPolicy1 TPolicyStatementNameOrEmpty,
vRtrImportPolicy2 TPolicyStatementNameOrEmpty,
vRtrImportPolicy3 TPolicyStatementNameOrEmpty,
vRtrImportPolicy4 TPolicyStatementNameOrEmpty,
vRtrImportPolicy5 TPolicyStatementNameOrEmpty,
vRtrExportPolicy1 TPolicyStatementNameOrEmpty,
vRtrExportPolicy2 TPolicyStatementNameOrEmpty,
vRtrExportPolicy3 TPolicyStatementNameOrEmpty,
vRtrExportPolicy4 TPolicyStatementNameOrEmpty,
vRtrExportPolicy5 TPolicyStatementNameOrEmpty
}
vRtrImportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrImportPolicy1 is the name of the first
policy to be used for determining which routes are imported
into the VRF for this virtual router. If no import policy
is defined, no routes are accepted into the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrImportPolicy1 through
vRtrImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 1 }
vRtrImportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrImportPolicy2 is the name of the second
policy to be used for determining which routes are imported
into the VRF for this virtual router. If no import policy
is defined, no routes are accepted into the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrImportPolicy1 through
vRtrImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 2 }
vRtrImportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrImportPolicy3 is the name of the third
policy to be used for determining which routes are imported
into the VRF for this virtual router. If no import policy
is defined, no routes are accepted into the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrImportPolicy1 through
vRtrImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 3 }
vRtrImportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrImportPolicy4 is the name of the fourth
policy to be used for determining which routes are imported
into the VRF for this virtual router. If no import policy
is defined, no routes are accepted into the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrImportPolicy1 through
vRtrImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 4 }
vRtrImportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrImportPolicy5 is the name of the fifth
policy to be used for determining which routes are imported
into the VRF for this virtual router. If no import policy
is defined, no routes are accepted into the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrImportPolicy1 through
vRtrImportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 5 }
vRtrExportPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrExportPolicy1 is the name of the first
policy to be used for determining which routes are exported
from the VRF for this virtual router. If no export policy
is defined, no routes are exported from the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The export policy name list, vRtrExportPolicy1 through
vRtrExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 6 }
vRtrExportPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrExportPolicy2 is the name of the second
policy to be used for determining which routes are exported
from the VRF for this virtual router. If no export policy
is defined, no routes are exported from the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The export policy name list, vRtrExportPolicy1 through
vRtrExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 7 }
vRtrExportPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrExportPolicy3 is the name of the third
policy to be used for determining which routes are exported
from the VRF for this virtual router. If no export policy
is defined, no routes are exported from the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The export policy name list, vRtrExportPolicy1 through
vRtrExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 8 }
vRtrExportPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrExportPolicy4 is the name of the fourth
policy to be used for determining which routes are exported
from the VRF for this virtual router. If no export policy
is defined, no routes are exported from the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The export policy name list, vRtrExportPolicy1 through
vRtrExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 9 }
vRtrExportPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrExportPolicy4 is the name of the fifth
policy to be used for determining which routes are exported
from the VRF for this virtual router. If no export policy
is defined, no routes are exported from the VRF.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The export policy name list, vRtrExportPolicy1 through
vRtrExportPolicy5, is handled by the SNMP agent as a single
entity. When an SNMP SET request is received to modify one or
more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU."
DEFVAL { ''H } -- the empty string
::= { vRtrPolicyEntry 10 }
--
-- Alcatel 7x50 SR series Virtual Router Statistics Table
--
-- Augmentation of the vRtrTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
-- the base table, vRtrTable, and the augmenting table, vRtrStatTable.
-- This in effect extends the vRtrTable with additional columns.
-- Creation (or deletion) of a row in the vRtrTable results in the same
-- fate for the row in the vRtrStatTable.
--
vRtrStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrStatTable has an entry for each virtual router configured
in the system."
::= { tmnxVRtrObjs 2 }
vRtrStatEntry OBJECT-TYPE
SYNTAX VRtrStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of statistics for a
virtual router in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrConfEntry }
::= { vRtrStatTable 1 }
VRtrStatEntry ::=
SEQUENCE {
vRtrOperState TmnxOperState,
vRtrDirectRoutes Gauge32,
vRtrDirectActiveRoutes Gauge32,
vRtrStaticRoutes Gauge32,
vRtrStaticActiveRoutes Gauge32,
vRtrOSPFRoutes Gauge32,
vRtrOSPFActiveRoutes Gauge32,
vRtrBGPRoutes Gauge32,
vRtrBGPActiveRoutes Gauge32,
vRtrISISRoutes Gauge32,
vRtrISISActiveRoutes Gauge32,
vRtrRIPRoutes Gauge32,
vRtrRIPActiveRoutes Gauge32,
vRtrAggregateRoutes Gauge32,
vRtrAggregateActiveRoutes Gauge32,
vRtrStatConfiguredIfs Gauge32,
vRtrStatActiveIfs Gauge32,
vRtrStatIllegalLabels Counter32,
vRtrStatCurrNumRoutes Gauge32,
vRtrStatBGPVpnRoutes Gauge32,
vRtrStatBGPVpnActiveRoutes Gauge32,
vRtrStatTotalLdpTunnels Gauge32,
vRtrStatTotalSdpTunnels Gauge32,
vRtrStatActiveLdpTunnels Gauge32,
vRtrStatActiveSdpTunnels Gauge32,
vRtrMulticastRoutes Gauge32,
vRtrStatActiveARPEntries Gauge32,
vRtrStatTotalARPEntries Gauge32,
vRtrV6DirectRoutes Gauge32,
vRtrV6DirectActiveRoutes Gauge32,
vRtrV6StaticRoutes Gauge32,
vRtrV6StaticActiveRoutes Gauge32,
vRtrV6OSPFRoutes Gauge32,
vRtrV6OSPFActiveRoutes Gauge32,
vRtrV6BGPRoutes Gauge32,
vRtrV6BGPActiveRoutes Gauge32,
vRtrV6ISISRoutes Gauge32,
vRtrV6ISISActiveRoutes Gauge32,
vRtrV6RIPRoutes Gauge32,
vRtrV6RIPActiveRoutes Gauge32,
vRtrV6AggregateRoutes Gauge32,
vRtrV6AggregateActiveRoutes Gauge32,
vRtrV6StatConfiguredIfs Gauge32,
vRtrV6StatActiveIfs Gauge32,
vRtrV6StatIllegalLabels Counter32,
vRtrV6StatCurrNumRoutes Gauge32,
vRtrV6StatBGPVpnRoutes Gauge32,
vRtrV6StatBGPVpnActiveRoutes Gauge32,
vRtrV6StatTotalLdpTunnels Gauge32,
vRtrV6StatTotalSdpTunnels Gauge32,
vRtrV6StatActiveLdpTunnels Gauge32,
vRtrV6StatActiveSdpTunnels Gauge32,
vRtrV6MulticastRoutes Gauge32,
vRtrV6StatActiveNbrEntries Gauge32,
vRtrV6StatTotalNbrEntries Gauge32,
vRtrSubMgmtRoutes Gauge32,
vRtrSubMgmtActiveRoutes Gauge32,
vRtrStatTotalRsvpTunnels Gauge32,
vRtrStatActiveRsvpTunnels Gauge32,
vRtrV6StatTotalRsvpTunnels Gauge32,
vRtrV6StatActiveRsvpTunnels Gauge32,
vRtrHostRoutes Gauge32,
vRtrHostActiveRoutes Gauge32,
vRtrV6HostRoutes Gauge32,
vRtrV6HostActiveRoutes Gauge32,
vRtrStatLocalARPEntries Gauge32,
vRtrStatStaticARPEntries Gauge32,
vRtrStatDynamicARPEntries Gauge32,
vRtrStatManagedARPEntries Gauge32,
vRtrStatInternalARPEntries Gauge32,
vRtrManagedRoutes Gauge32,
vRtrManagedActiveRoutes Gauge32
}
vRtrOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrOperState indicates current operational status of this
virtual router."
::= { vRtrStatEntry 1 }
vRtrDirectRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrDirectRoutes indicates the current number of direct routes
for this instance of the route table."
::= { vRtrStatEntry 2 }
vRtrDirectActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrDirectActiveRoutes indicates the current number of active direct
routes for this instance of the route table."
::= { vRtrStatEntry 3 }
vRtrStaticRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStaticRoutes indicates the current number of static routes for
this instance of the route table."
::= { vRtrStatEntry 4 }
vRtrStaticActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStaticActiveRoutes indicates the current number of active static
routes for this instance of the route table."
::= { vRtrStatEntry 5 }
vRtrOSPFRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrOSPFRoutes indicates the current number of ospf routes for this
instance of the route table."
::= { vRtrStatEntry 6 }
vRtrOSPFActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrOSPFActiveRoutes indicates the current number of active ospf
routes for this instance of the route table."
::= { vRtrStatEntry 7 }
vRtrBGPRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrBGPRoutes indicates the current number of bgp routes for this
instance of the route table."
::= { vRtrStatEntry 8 }
vRtrBGPActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrBGPActiveRoutes indicates the current number of active bgp
routes for this instance of the route table."
::= { vRtrStatEntry 9 }
vRtrISISRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrISISRoutes indicates the current number of isis routes for this
instance of the route table."
::= { vRtrStatEntry 10 }
vRtrISISActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrISISActiveRoutes indicates the current number of active
isis routes for this instance of the route table."
::= { vRtrStatEntry 11 }
vRtrRIPRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrRIPRoutes indicates the current number of rip routes for this
instance of the route table."
::= { vRtrStatEntry 12 }
vRtrRIPActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrRIPActiveRoutes indicates the current number of active rip
routes for this instance of the route table."
::= { vRtrStatEntry 13 }
vRtrAggregateRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrAggregateRoutes indicates the current number of aggregate
routes for this instance of the route table."
::= { vRtrStatEntry 14 }
vRtrAggregateActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrAggregateActiveRoutes indicates the current number of active
aggregate routes for this instance of the route table."
::= { vRtrStatEntry 15 }
vRtrStatConfiguredIfs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatConfiguredIfs indicates the current number of router interfaces
configured on this virtual router."
::= { vRtrStatEntry 16 }
vRtrStatActiveIfs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatActiveIfs indicates the current number of router interfaces
with vRtrIfAdminState equal 'inService' on this virtual router."
::= { vRtrStatEntry 17 }
vRtrStatIllegalLabels OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatIllegalLabels indicates the number of illegally received
labels on this virtual router."
::= { vRtrStatEntry 18 }
vRtrStatCurrNumRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatCurrNumRoutes indicates the current number of routes
in the VRF for this virtual router."
::= { vRtrStatEntry 19 }
vRtrStatBGPVpnRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes
learned by MP-BGP for this virtual router."
::= { vRtrStatEntry 20 }
vRtrStatBGPVpnActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatBGPVpnActiveRoutes indicates the current number of active
VPN-IPV4 routes learned by MP-BGP for this virtual router."
::= { vRtrStatEntry 21 }
vRtrStatTotalLdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatTotalLdpTunnels indicates the current number of both active
and inactive LDP tunnels."
::= { vRtrStatEntry 22 }
vRtrStatTotalSdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatTotalSdpTunnels indicates the current number of both active
and inactive SDP tunnels."
::= { vRtrStatEntry 23 }
vRtrStatActiveLdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatActiveLdpTunnels indicates the current number of rows in
the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'."
::= { vRtrStatEntry 24 }
vRtrStatActiveSdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatActiveSdpTunnels indicates the current number of rows in
the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'."
::= { vRtrStatEntry 25 }
vRtrMulticastRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrMulticastRoutes indicates the current number of rows in
the vRtrPimGrpSrcTable."
::= { vRtrStatEntry 26 }
vRtrStatActiveARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatActiveARPEntries indicates the number of active
ARP entries for the specified virtual router in the system."
::= { vRtrStatEntry 27 }
vRtrStatTotalARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrStatTotalARPEntries indicates the total number of active
and inactive ARP entries for the specified virtual router in
the system."
::= { vRtrStatEntry 28 }
vRtrV6DirectRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6DirectRoutes indicates the current number of v6 direct
routes for this instance of the route table."
::= { vRtrStatEntry 29 }
vRtrV6DirectActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6DirectActiveRoutes indicates the current number of
v6 active direct routes for this instance of the route table."
::= { vRtrStatEntry 30 }
vRtrV6StaticRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StaticRoutes indicates the current number of v6 static
routes for this instance of the route table."
::= { vRtrStatEntry 31 }
vRtrV6StaticActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StaticActiveRoutes indicates the current number of v6
active static routes for this instance of the route table."
::= { vRtrStatEntry 32 }
vRtrV6OSPFRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6OSPFRoutes indicates the current number of v6 ospf
routes for this instance of the route table."
::= { vRtrStatEntry 33 }
vRtrV6OSPFActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6OSPFActiveRoutes indicates the current number of
v6 active ospf routes for this instance of the route table."
::= { vRtrStatEntry 34 }
vRtrV6BGPRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6BGPRoutes indicates the current number of v6 bgp
routes for this instance of the route table."
::= { vRtrStatEntry 35 }
vRtrV6BGPActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6BGPActiveRoutes indicates the current number of
v6 active bgp routes for this instance of the route table."
::= { vRtrStatEntry 36 }
vRtrV6ISISRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6ISISRoutes indicates the current number of v6
isis routes for this instance of the route table."
::= { vRtrStatEntry 37 }
vRtrV6ISISActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6ISISActiveRoutes indicates the current number
of v6 active isis routes for this instance of the route table."
::= { vRtrStatEntry 38 }
vRtrV6RIPRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6RIPRoutes indicates the current number of v6 rip routes
for this instance of the route table."
::= { vRtrStatEntry 39 }
vRtrV6RIPActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6RIPActiveRoutes indicates the current number of active
v6 rip routes for this instance of the route table."
::= { vRtrStatEntry 40 }
vRtrV6AggregateRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6AggregateRoutes indicates the current number of
v6 aggregate routes for this instance of the route table."
::= { vRtrStatEntry 41 }
vRtrV6AggregateActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6AggregateActiveRoutes indicates the current number of
active v6 aggregate routes for this instance of the route table."
::= { vRtrStatEntry 42 }
vRtrV6StatConfiguredIfs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatConfiguredIfs indicates the current number of
v6 router interfaces configured on this virtual router."
::= { vRtrStatEntry 43 }
vRtrV6StatActiveIfs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatActiveIfs indicates the current number of
v6 router interfaces with vRtrIfAdminState equal
'inService' on this virtual router."
::= { vRtrStatEntry 44 }
vRtrV6StatIllegalLabels OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatIllegalLabels indicates the number of illegally
received v6 labels on this virtual router."
::= { vRtrStatEntry 45 }
vRtrV6StatCurrNumRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatCurrNumRoutes indicates the current number of v6 routes
in the VRF for this virtual router."
::= { vRtrStatEntry 46 }
vRtrV6StatBGPVpnRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes
learned by MP-BGP for this virtual router."
::= { vRtrStatEntry 47 }
vRtrV6StatBGPVpnActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatBGPVpnActiveRoutes indicates the current number of active
VPN-IPV6 routes learned by MP-BGP for this virtual router."
::= { vRtrStatEntry 48 }
vRtrV6StatTotalLdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatTotalLdpTunnels indicates the current number of both active
and inactive v6 LDP tunnels."
::= { vRtrStatEntry 49 }
vRtrV6StatTotalSdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatTotalSdpTunnels indicates the current number of both active
and inactive v6 SDP tunnels."
::= { vRtrStatEntry 50 }
vRtrV6StatActiveLdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in
the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'."
::= { vRtrStatEntry 51 }
vRtrV6StatActiveSdpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in
the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'."
::= { vRtrStatEntry 52 }
vRtrV6MulticastRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6MulticastRoutes indicates the current number of v6 rows in
the vRtrPimGrpSrcTable."
::= { vRtrStatEntry 53 }
vRtrV6StatActiveNbrEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor
discovery entries for the specified virtual router in the system."
::= { vRtrStatEntry 54 }
vRtrV6StatTotalNbrEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrV6StatTotalNbrEntries indicates the total number of active
and inactive v6 neighbor discovery entries for the specified
virtual router in the system."
::= { vRtrStatEntry 55 }
vRtrSubMgmtRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrSubMgmtRoutes indicates the total number of
subscriber management routes in the route Table."
::= { vRtrStatEntry 56 }
vRtrSubMgmtActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrSubMgmtActiveRoutes indicates the number of
active subscriber management routes."
::= { vRtrStatEntry 57 }
vRtrStatTotalRsvpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatTotalRsvpTunnels indicates the current
number of both active and inactive RSVP tunnels."
::= { vRtrStatEntry 58 }
vRtrStatActiveRsvpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatActiveRsvpTunnels indicates the current
number of rows in the vRtrTunnelTable where vRtrTunnelType has a
value of 'rsvp'."
::= { vRtrStatEntry 59 }
vRtrV6StatTotalRsvpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrV6StatTotalRsvpTunnels indicates the current
number of both active and inactive IPv6 RSVP tunnels."
::= { vRtrStatEntry 60 }
vRtrV6StatActiveRsvpTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrV6StatActiveRsvpTunnels indicates the current
number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType
has a value of 'rsvp'."
::= { vRtrStatEntry 61 }
vRtrHostRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrHostRoutes indicates the current number of
direct routes with prefix value 32 for this instance of the
route table."
::= { vRtrStatEntry 62 }
vRtrHostActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrHostActiveRoutes indicates the current number of
active direct routes with prefix value 32 for this instance of the
route table."
::= { vRtrStatEntry 63 }
vRtrV6HostRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrV6HostRoutes indicates the current number of v6
direct routes with prefix value 128 for this instance of the
route table."
::= { vRtrStatEntry 64 }
vRtrV6HostActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrV6HostActiveRoutes indicates the current number of
v6 active direct routes with prefix value 128 for this instance
of the route table."
::= { vRtrStatEntry 65 }
vRtrStatLocalARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatLocalARPEntries indicates the total number of
active and inactive local ARP entries for the specified virtual
router in the system."
::= { vRtrStatEntry 66 }
vRtrStatStaticARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatStaticARPEntries indicates the total number of
active and inactive static ARP entries for the specified virtual
router in the system."
::= { vRtrStatEntry 67 }
vRtrStatDynamicARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatDynamicARPEntries indicates the total number of
active and inactive dynamic ARP entries for the specified virtual
router in the system."
::= { vRtrStatEntry 68 }
vRtrStatManagedARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatManagedARPEntries indicates the total number of
active and inactive managed ARP entries for the specified virtual
router in the system."
::= { vRtrStatEntry 69 }
vRtrStatInternalARPEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStatInternalARPEntries indicates the total number of
active and inactive internal ARP entries for the specified virtual
router in the system."
::= { vRtrStatEntry 70 }
vRtrManagedRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrManagedRoutes indicates the total number of
active and inactive managed routes for the specified virtual
router in the system."
::= { vRtrStatEntry 71 }
vRtrManagedActiveRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrManagedActiveRoutes indicates the total number of
active managed routes for the specified virtual
router in the system."
::= { vRtrStatEntry 72 }
--
-- Virtual Router Interfaces Table
--
vRtrIfTotalNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of router interfaces configured in this system."
::= { tmnxVRtrObjs 3 }
vRtrIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfTable has an entry for each router interface configured in
the system."
::= { tmnxVRtrObjs 4 }
vRtrIfEntry OBJECT-TYPE
SYNTAX VRtrIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a virtual router interface in the system.
Entries can be created and deleted via SNMP SET operations using the
vRtrIfRowStatus variable."
INDEX { vRtrID, vRtrIfIndex }
::= { vRtrIfTable 1 }
VRtrIfEntry ::=
SEQUENCE {
vRtrIfIndex InterfaceIndex,
vRtrIfRowStatus RowStatus,
vRtrIfType INTEGER,
vRtrIfName TNamedItem,
vRtrIfPortID TmnxPortID,
vRtrIfChannelID Unsigned32,
vRtrIfEncapValue TmnxEncapVal,
vRtrIfAdminState TmnxAdminState,
vRtrIfOperState TmnxOperState,
vRtrIfAlias DisplayString,
vRtrIfPhysicalAddress MacAddress,
vRtrIfArpTimeout Unsigned32,
vRtrIfIcmpMaskReply TruthValue,
vRtrIfIcmpRedirects TruthValue,
vRtrIfIcmpNumRedirects Unsigned32,
vRtrIfIcmpRedirectsTime Unsigned32,
vRtrIfIcmpUnreachables TruthValue,
vRtrIfIcmpNumUnreachables Unsigned32,
vRtrIfIcmpUnreachablesTime Unsigned32,
vRtrIfIcmpTtlExpired TruthValue,
vRtrIfIcmpNumTtlExpired Unsigned32,
vRtrIfIcmpTtlExpiredTime Unsigned32,
vRtrIfNtpBroadcast TruthValue,
vRtrIfUnnumbered IpAddress,
vRtrIfMtu Unsigned32,
vRtrIfQosPolicyId TNetworkPolicyID,
vRtrIfIngressFilterId TIPFilterID,
vRtrIfEgressFilterId TIPFilterID,
vRtrIfDirectedBroadcast TruthValue,
vRtrIfMplsStatus TmnxStatus,
vRtrIfUnnumberedIf DisplayString,
vRtrIfCflowd INTEGER,
vRtrIfVPNClass INTEGER,
vRtrIfDescription TItemLongDescription,
vRtrIfProtocol BITS,
vRtrIfTosMarkingTrusted TruthValue,
vRtrIfServiceId TmnxServId,
vRtrIfArpPopulate INTEGER,
vRtrIfIPv6ConfigAllowed TruthValue,
vRtrIfIPv6OperState TmnxOperState,
vRtrIfIPv6IngressFilterId TIPFilterID,
vRtrIfIPv6EgressFilterId TIPFilterID,
vRtrIfIcmpV6Redirects TruthValue,
vRtrIfIcmpV6NumRedirects Unsigned32,
vRtrIfIcmpV6RedirectsTime Unsigned32,
vRtrIfIcmpV6Unreachables TruthValue,
vRtrIfIcmpV6NumUnreachables Unsigned32,
vRtrIfIcmpV6UnreachablesTime Unsigned32,
vRtrIfIcmpV6TimeExceeded TruthValue,
vRtrIfIcmpV6NumTimeExceeded Unsigned32,
vRtrIfIcmpV6TimeExceededTime Unsigned32,
vRtrIfIcmpV6PktTooBig TruthValue,
vRtrIfIcmpV6NumPktTooBig Unsigned32,
vRtrIfIcmpV6PktTooBigTime Unsigned32,
vRtrIfIcmpV6ParamProblem TruthValue,
vRtrIfIcmpV6NumParamProblem Unsigned32,
vRtrIfIcmpV6ParamProblemTime Unsigned32,
vRtrIfLinkLocalAddressType InetAddressType,
vRtrIfLinkLocalAddress InetAddress,
vRtrIfLinkLocalAddressState TmnxInetAddrState,
vRtrIfLastOperStateChange TimeStamp,
vRtrIfOperMtu Unsigned32,
vRtrIfGlobalIndex Unsigned32,
vRtrIfDelaySeconds Unsigned32,
vRtrIfDelayUpTimer Integer32,
vRtrIfLocalDhcpServerName TNamedItemOrEmpty,
vRtrIfInitDelayEnable TruthValue,
vRtrIfCpmProtPolicyId TCpmProtPolicyID,
vRtrIfCpmProtUncfgdProtoDropCnt Gauge32,
vRtrIfLdpSyncTimer Unsigned32
}
vRtrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique value which identifies this interface of this virtual
router in the Tmnx system. This field provides an identifier for
virtual router interfaces similar to the ifIndex values used in the
mib-2 interfaces table for physical interfaces. The vRtrIfIndex values
can be reused for different virtual routers, but are unique within
those entries with the same vRtrID.
The vRtrIfIndex value for each virtual interface must remain constant
at least from one re-initialization of the system management processor
to the next."
::= { vRtrIfEntry 1 }
vRtrIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status. The creation or deletion of a router interface entry
causes creation or deletion of corresponding entries in other Tmnx MIB
tables with the same vRtrID and vRtrIfIndex values, such as the
vRtrIpAddrTable. The router interface is associated to a physical port
interface through the vRtrIfPortID and vRtrIfEncapValue variables. The
RowStatus cannot be SET to 'active' unless vRtrIfName has been
initialized."
::= { vRtrIfEntry 2 }
vRtrIfType OBJECT-TYPE
SYNTAX INTEGER {
network(1),
service(2),
serviceIes(3),
serviceRtdVpls(4), --obsolete
serviceVprn(5),
serviceIesSubscriber(6),
serviceIesGroup(7),
serviceVprnSubscriber(8),
serviceVprnGroup(9),
serviceIesRedundant(10),
serviceVprnRedundant(11),
serviceVpls(12),
serviceIesCem(13), --not supported
serviceVprnCem(14), --not supported
serviceVprnIPsec(15),
serviceVprnIPMirror(16)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfType specifies the type of this interface. Different
virtual router interface types are defined as follows:
network - defined on a network port.
service - used internally.
serviceIes - defined on a SAP or Spoke SDP.
serviceRtdVpls - obsoleted.
serviceVprn - defined on a SAP or Spoke SDP.
serviceIesSubscriber - used internally.
serviceIesGroup - defined on a SAP
serviceVprnSubscriber - used internally.
serviceVprnGroup - defined on a SAP.
serviceIesRedundant - defined on a Spoke SDP.
serviceVprnRedundant - defined on a Spoke SDP.
serviceVpls - defined on an IP endpoint for VPLS.
serviceIesCem - defined on a SAP. --not supported
serviceVprnCem - defined on a SAP. --not supported
serviceVprnIPsec - defined on a SAP.
serviceVprnIPMirror - defined on a Mirror."
::= { vRtrIfEntry 3 }
vRtrIfName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative name assigned this router interface. The interface
name must be unique among entries with the same vRtrID value.
In order for row creation to succeed, a value must also be assigned
to vRtrIfName."
::= { vRtrIfEntry 4 }
vRtrIfPortID OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The physical port to which this interface is bound. If vRtrIfPortID is
zero (0), then there is no binding between this virtual router
interface and a physical port. Once an interface has been bound to a
port, several steps are required to change the binding to some other
TmnxPortID value.
vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to
zero (0) to disassociate the interface from the original port binding;
finally, set vRtrIfPortID to the value for the new port binding.
Setting vRtrIfPortID to 0x20000001 indicates that this interface is the
system interface for the device."
DEFVAL { 0 }
::= { vRtrIfEntry 5 }
vRtrIfChannelID OBJECT-TYPE
SYNTAX Unsigned32 (0..64)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID
is the STSx channel number used by this interface. If vRtrIfPortID is
not a SONET port or the interface has not yet been bound to a physical
port, vRtrIfChannelID will be zero (0).
This object was obsoleted in release 5.0."
DEFVAL { 0 }
::= { vRtrIfEntry 6 }
vRtrIfEncapValue OBJECT-TYPE
SYNTAX TmnxEncapVal
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the label used along with vRtrIfPortID to identify a SAP
on the specified access port."
::= { vRtrIfEntry 7 }
vRtrIfAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state for this router interface."
DEFVAL { outOfService }
::= { vRtrIfEntry 8 }
vRtrIfOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of this router interface."
::= { vRtrIfEntry 9 }
vRtrIfAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternative administrative name assigned this router interface."
::= { vRtrIfEntry 10 }
vRtrIfPhysicalAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface's address at its protocol sub-layer. For example, for an
802.x interface, this object normally contains a MAC address. The
interface's media-specific MIB must define the bit and byte ordering
and the format of the value of this object. For interfaces which do
not have such an address (e.g., a serial line), this object should
contain an octet string of zero length."
::= { vRtrIfEntry 11 }
vRtrIfArpTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfArpTimeout determines how long an ARP entry
associated with this interface remains in the ARP cache. When
vRtrIfArpTimeout has a value of zero, '0', the entry will never be
cleared from the cache."
DEFVAL { 14400 }
::= { vRtrIfEntry 12 }
vRtrIfIcmpMaskReply OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfIcmpMaskReply is set to 'true', a reply will be
issued when this node is requested for the network mask for this
subnet. The requesting node must be attached to the local
network. When vRtrIfIcmpMaskReply is set to 'false', no reply
is issued if an ICMP mask request is received."
DEFVAL { true }
::= { vRtrIfEntry 13 }
vRtrIfIcmpRedirects OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are
generated when routes are not optimal on this router and another
router on the same subnetwork has a better route in order to
alert that node that a better route is available. When
vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not
generated."
DEFVAL { true }
::= { vRtrIfEntry 14 }
vRtrIfIcmpNumRedirects OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpNumRedirects limits the number of redirects
issued per the time frame specified in vRtrIfIcmpRedirectsTime."
DEFVAL { 100 }
::= { vRtrIfEntry 15 }
vRtrIfIcmpRedirectsTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpRedirectsTime determines the time frame
in seconds that is used to limit the number of redirects issued
per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 16 }
vRtrIfIcmpUnreachables OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfIcmpUnreachables is set to 'true', ICMP host and
network unreachable messages are generated by this interface.
When vRtrIfIcmpUnreachables is set to 'false', ICMP host and
network unreachable messages are not sent."
DEFVAL { true }
::= { vRtrIfEntry 17 }
vRtrIfIcmpNumUnreachables OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpNumUnreachables determines how many
destination unreachable messages are issued in the time frame
specified by vRtrIfIcmpUnreachablesTime."
DEFVAL { 100 }
::= { vRtrIfEntry 18 }
vRtrIfIcmpUnreachablesTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpUnreachablesTime sets the time frame in
seconds that is used to limit the number of destination
unreachable messages issued per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 19 }
vRtrIfIcmpTtlExpired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfIcmpTtlExpired is set to 'true', the rate that
ttl-expired messages by this interface is throttled based on
the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime.
When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired
messages are sent."
DEFVAL { true }
::= { vRtrIfEntry 20 }
vRtrIfIcmpNumTtlExpired OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired
messages will be issued in the time frame specified by
vRtrIfIcmpTtlExpiredTime."
DEFVAL { 100 }
::= { vRtrIfEntry 21 }
vRtrIfIcmpTtlExpiredTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpTtlExpiredTime sets the time frame in
seconds that is used to limit the number of ttl-expired messages
issued by this interface with the specified time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 22 }
vRtrIfNtpBroadcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfNtpBroadcast is set to 'true', the NTP broadcasts
will be transmitted on this interface."
DEFVAL { false }
::= { vRtrIfEntry 23 }
vRtrIfUnnumbered OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to be used when generating packets on this interface.
This variable is complemented by vRtrIfUnnumbered. If
vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered
is '0.0.0.0' it implies that no unnumbered interface is configured.
At any instant only one of the two members can be non-null.
A value of '255.255.255.255' implies the use of system-ip. It is
strongly suggested to use the node's system IP address as it is not
associated with a particular physical interface and is therefore always
reachable."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { vRtrIfEntry 24 }
vRtrIfMtu OBJECT-TYPE
SYNTAX Unsigned32(0|512..9000)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfMtu is used to reflect the MTU size of this
interface in the header of an ICMP MTU exceeded message when
a packet is too large to be transmitted on this interface.
The default size is calculated by subtracting the DLC header
size from the physical MTU size of the interface.
When a SNMP SET request is received with a value of zero (0), the
agent actually sets vRtrIfMtu to the calculated default size."
DEFVAL { 0 }
::= { vRtrIfEntry 25 }
vRtrIfQosPolicyId OBJECT-TYPE
SYNTAX TNetworkPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfQosPolicyId associates a pre-existing
network-policy-id to a network interface. Packets are marked
using qos policies on edge switches; invoking a qos policy on
a network port allows for the packets that match the policy
criteria to be remarked.
If this entry indicates a service virtual router interface or
the special out-of-band management interface, this object is
meaningless and is not applied to the interface."
DEFVAL { 1 }
::= { vRtrIfEntry 26 }
vRtrIfIngressFilterId OBJECT-TYPE
SYNTAX TIPFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIngressFilterId associates an ip-filter-id
with an ingress interface. Filters control the forwarding and
dropping of packets based on IP criteria. A value of zero (0)
indicates that there is no ip-filter-id associated with this
interface.
If this entry indicates a service virtual router interface or
the special out-of-band management interface, this object is
meaningless and is not applied to the interface."
DEFVAL { 0 }
::= { vRtrIfEntry 27 }
vRtrIfEgressFilterId OBJECT-TYPE
SYNTAX TIPFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfEgressFilterId associates an ip-filter-id
with an egress interface. Filters control the forwarding and
dropping of packets based on IP criteria. A value of zero (0)
indicates that there is no ip-filter-id associated with this
interface.
If this entry indicates a service virtual router interface or
the special out-of-band management interface, this object is
meaningless and is not applied to the interface."
DEFVAL { 0 }
::= { vRtrIfEntry 28 }
vRtrIfDirectedBroadcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts
directed to this interface to be accepted. When 'false',
directed broadcasts are dropped. This is of particular use
when preventing denial of service attacks."
DEFVAL { false }
::= { vRtrIfEntry 29 }
vRtrIfMplsStatus OBJECT-TYPE
SYNTAX TmnxStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this variable to 'create' causes this interface to be
used with MPLS. It also causes a row to be created in the
vRtrMplsIfTable. Setting it to 'delete' removes the interface
from MPLS and causes the corresponding row in the vRtrMplsIfTable
to be removed. However, an attempt to set vRtrIfMplsStatus to
'delete' will fail if MPLS activity on this interface is not
administratively in the outOfService state, i.e. vRtrMplsIfAdminState
of the vRtrMplsIfTable must be set to 'outOfService'."
DEFVAL { delete }
::= { vRtrIfEntry 30 }
vRtrIfUnnumberedIf OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the interface to which this unnumbered interface will
refer to. This variable is complemented by vRtrIfUnnumbered. If
vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it
implies that no unnumbered interface is configured. At any instant
only one of the two members can be non-null."
::= { vRtrIfEntry 31 }
vRtrIfCflowd OBJECT-TYPE
SYNTAX INTEGER {
none (1),
acl (2),
interface (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfCflowd specifies the type of Cflowd analysis
applied to this interface. A Cflowd profile controls the sampling
and analysis of data flows through the router. A value of none (1)
indicates that there is no Cflowd analysis associated with this
interface."
DEFVAL { none }
::= { vRtrIfEntry 32 }
vRtrIfVPNClass OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
carrierOfCarrier (1),
enterprise (2),
interProvider (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfVPNClass specifies the type of VPN scenario
supported on this virtual router interface."
::= { vRtrIfEntry 33 }
vRtrIfDescription OBJECT-TYPE
SYNTAX TItemLongDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDescription is a user provided description
string for this virtual router interface. It can consist of
any printable, seven-bit ASCII characters up to 80 characters in
length."
DEFVAL { ''H } -- the empty string
::= { vRtrIfEntry 34 }
vRtrIfProtocol OBJECT-TYPE
SYNTAX BITS {
ospfv2 (0),
rip (1),
isis (2),
bgp (3),
mpls (4),
rsvp (5),
ldp (6),
igmp (7),
pim (8),
ospf3 (9),
mld (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfProtocol indicates which protocols are running
on this virtual router interface. If the bit corresponding to a
protocol is set, then the protocol is enabled on this interface."
::= { vRtrIfEntry 35 }
vRtrIfTosMarkingTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfTosMarkingTrusted specifies whether the TOS
bits on the packets ingressing on the interface should be
trusted by the system or not. If the value is set to 'true', the
TOS bits should be trusted.
If the system does not trust these packets, it will remark the
packets upon egress as indicated by the value of the egress
remark flag, ALCATEL-IND1-TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark.
The egress remark flag is part of the QoS policy applied to the
network interface.
The interfaces belonging to the IES service have the egress
remark flag set to not trusted, 'false', by default. For all other
interface types, the TOS bits are trusted by default."
DEFVAL { true }
::= { vRtrIfEntry 36 }
vRtrIfServiceId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfServiceId specifies the service id for this
interface. This object must always be set at row creation when
the vRtrIfType is not network(1). This object cannot be modified
once the row is created."
DEFVAL { 0 }
::= { vRtrIfEntry 37 }
vRtrIfArpPopulate OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfArpPopulate specifies the ARP
populate action.
The value disabled means that the normal ARP protocol is active.
The value enabled means that the system will not originate ARP
requests on this interface. The ARP cache is only populated with MAC
addresses learned via the DHCP protocol.
If the value of vRtrIfType is network, this object can only be set
to disabled."
DEFVAL { disabled }
::= { vRtrIfEntry 38 }
vRtrIfIPv6ConfigAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be
configured on this router interface. When the value is 'true', IPv6
can be configured on this interface. When it is 'false', IPv6
cannot be configured."
DEFVAL { false }
::= { vRtrIfEntry 39 }
vRtrIfIPv6OperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status for IPv6 on this router interface."
::= { vRtrIfEntry 40 }
vRtrIfIPv6IngressFilterId OBJECT-TYPE
SYNTAX TIPFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id
with an ingress v6 interface. Filters control the forwarding and
dropping of packets based on IP criteria. A value of zero (0)
indicates that there is no ip-filter-id associated with this
interface.
If this entry indicates a service virtual router interface or
the special out-of-band management interface, this object is
meaningless and is not applied to the interface."
DEFVAL { 0 }
::= { vRtrIfEntry 41 }
vRtrIfIPv6EgressFilterId OBJECT-TYPE
SYNTAX TIPFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id
with an egress v6 interface. Filters control the forwarding and
dropping of packets based on IP criteria. A value of zero (0)
indicates that there is no ip-filter-id associated with this
interface.
If this entry indicates a service virtual router interface or
the special out-of-band management interface, this object is
meaningless and is not applied to the interface."
DEFVAL { 0 }
::= { vRtrIfEntry 42 }
vRtrIfIcmpV6Redirects OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are
generated when routes are not optimal on this router and another
router on the same subnetwork has a better route in order to
alert that node that a better route is available. When
vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not
generated."
DEFVAL { true }
::= { vRtrIfEntry 43 }
vRtrIfIcmpV6NumRedirects OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects
issued per the time frame specified in vRtrIfIcmpV6RedirectsTime."
DEFVAL { 100 }
::= { vRtrIfEntry 44 }
vRtrIfIcmpV6RedirectsTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6RedirectsTime determines the time frame
in seconds that is used to limit the number of v6 redirects issued
per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 45 }
vRtrIfIcmpV6Unreachables OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and
network unreachable messages are generated by this interface.
When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and
network unreachable messages are not sent."
DEFVAL { true }
::= { vRtrIfEntry 46 }
vRtrIfIcmpV6NumUnreachables OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6NumUnreachables determines how many
destination unreachable ICMPv6 messages are issued in the time
frame specified by vRtrIfIcmpV6UnreachablesTime."
DEFVAL { 100 }
::= { vRtrIfEntry 47 }
vRtrIfIcmpV6UnreachablesTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in
seconds that is used to limit the number of destination
unreachable ICMPv6 messages issued per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 48 }
vRtrIfIcmpV6TimeExceeded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6TimeExceeded specifies whether
time-exceeded ICMP messages should be sent. When it is set to
'true', ICMPv6 time-exceeded messages are generated by this
interface. When vRtrIfIcmpV6TimeExceeded is set to 'false',
ICMPv6 time-exceeded messages are not sent."
DEFVAL { true }
::= { vRtrIfEntry 49 }
vRtrIfIcmpV6NumTimeExceeded OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6NumTimeExceeded specifies how many
time-exceeded ICMPv6 messages are issued in the time
frame specified by vRtrIfIcmpV6TimeExceededTime."
DEFVAL { 100 }
::= { vRtrIfEntry 50 }
vRtrIfIcmpV6TimeExceededTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame
in seconds that is used to limit the number of time-exceeded
ICMPv6 messages issued per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 51 }
vRtrIfIcmpV6PktTooBig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6PktTooBig specifies whether
packet-too-big ICMP messages should be sent. When it is set to
'true', ICMPv6 packet-too-big messages are generated by this
interface. When vRtrIfIcmpV6PktTooBig is set to 'false',
ICMPv6 packet-too-big messages are not sent."
DEFVAL { true }
::= { vRtrIfEntry 52 }
vRtrIfIcmpV6NumPktTooBig OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6NumPktTooBig specifies how many
packet-too-big ICMPv6 messages are issued in the time
frame specified by vRtrIfIcmpV6PktTooBigTime."
DEFVAL { 100 }
::= { vRtrIfEntry 53 }
vRtrIfIcmpV6PktTooBigTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame
in seconds that is used to limit the number of packet-too-big
ICMPv6 messages issued per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 54 }
vRtrIfIcmpV6ParamProblem OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6ParamProblem specifies whether
parameter-problem ICMP messages should be sent. When it is set to
'true', ICMPv6 parameter-problem messages are generated by this
interface. When vRtrIfIcmpV6ParamProblem is set to 'false',
ICMPv6 parameter-problem messages are not sent."
DEFVAL { true }
::= { vRtrIfEntry 55 }
vRtrIfIcmpV6NumParamProblem OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6NumParamProblem specifies how many
parameter-problem ICMPv6 messages are issued in the time
frame specified by vRtrIfIcmpV6ParamProblemTime."
DEFVAL { 100 }
::= { vRtrIfEntry 56 }
vRtrIfIcmpV6ParamProblemTime OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame
in seconds that is used to limit the number of parameter-problem
ICMPv6 messages issued per time frame."
DEFVAL { 10 }
::= { vRtrIfEntry 57 }
vRtrIfLinkLocalAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfLinkLocalAddressType indicates the IP address
type of the link local address of this virtual router interface.
When the value of vRtrIfIPv6OperState is 'inService', this object
will have a value of 'ipv6z', and 'unknown' otherwise."
::= { vRtrIfEntry 58 }
vRtrIfLinkLocalAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfLinkLocalAddress indicates the link local IP
address of this virtual router interface. This address valid when
the value of vRtrIfIPv6OperState is 'inService'."
::= { vRtrIfEntry 59 }
vRtrIfLinkLocalAddressState OBJECT-TYPE
SYNTAX TmnxInetAddrState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfLinkLocalAddressState indicates the address
state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is
'outOfService', the value of this object is 'unknown'."
::= { vRtrIfEntry 60 }
vRtrIfLastOperStateChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfLastOperStateChange indicates the sysUpTime when
the operational state of this interface last changed."
::= { vRtrIfEntry 61 }
vRtrIfOperMtu OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfOperMtu indicates the operational value of the
IP MTU on this interface. It is the minimum of the vRtrIfMtu and
the MTU of the physical port this interface is bound to."
::= { vRtrIfEntry 62 }
vRtrIfGlobalIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfGlobalIndex uniquely identifies this interface
in the tmnx system. This field provides an identifier for router
interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex
is unique within each virtual router. The vRtrIfGlobalIndex is unique
system wide regardless of the vRtrID.
The vRtrIfGlobalIndex value for each virtual interface must remain
constant at least from one re-initialization of the system management
processor to the next."
::= { vRtrIfEntry 63 }
vRtrIfDelaySeconds OBJECT-TYPE
SYNTAX Unsigned32 (0..1200)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDelaySeconds specifies the time in seconds
that is used to bring up the interface.
When interface comes up, it will not become operational until
after the specified delay.
The default value of vRtrIfDelaySeconds is 0. It indicates
that the interface will become operational as soon as
it is enabled."
DEFVAL { 0 }
::= { vRtrIfEntry 64 }
vRtrIfDelayUpTimer OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfDelayUpTimer indicates the time left before the
interface comes up when vRtrIfDelaySeconds is configured to a
non-zero value.
When the interface is down, this object will return the value -1.
It's value can be in the range 0 to vRtrIfDelaySeconds's value
if the interface is 'about to come up'.
If the interface is up, the value of vRtrIfDelayUpTimer will be 0."
::= { vRtrIfEntry 65 }
vRtrIfLocalDhcpServerName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfLocalDhcpServerName specifies the local DHCP server
that can be reached via this interface.
The server itself is configured on virtual router level in object
TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning
an ip-address to it is done here by linking it to an interface.
A server can be linked to several interfaces on the same virtual
router."
DEFVAL { ''H }
::= { vRtrIfEntry 66 }
vRtrIfInitDelayEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds
is used only the next time or everytime the system attempts to bring
the interface operationally up.
The value of vRtrIfInitDelayEnable is ignored if the value of
vRtrIfDelaySeconds is set to 0.
The value of vRtrIfInitDelayEnable is only set when interface is of
type subscriber-interface.
When the value vRtrIfInitDelayEnable is set to 'false', everytime
the system attempts to bring the interface operationally up,
it will be delayed by the value of vRtrIfDelaySeconds.
When the value vRtrIfInitDelayEnable is set to 'true', only the next
time the system attempts to bring the interface operationally up,
it will be delayed by the value of vRtrIfDelaySeconds."
DEFVAL { false }
::= { vRtrIfEntry 67 }
vRtrIfCpmProtPolicyId OBJECT-TYPE
SYNTAX TCpmProtPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy
with an interface.
A value of zero (0) specifies that no CPM Protection policy is
associated with this interface.
A value of one (1) specifies that the default CPM Protection policy is
associated with this interface.
If no value for vRtrIfCpmProtPolicyId is specified when the
vRtrIfEntry is created, the system assigns a default value,
derived from the value of the object vRtrIfType, as follows:
vRtrIfType vRtrIfCpmProtPolicyId
---------------------------------------------------------------------
network 1
service used internally.
serviceIes 1
serviceRtdVpls obsoleted.
serviceVprn 1
serviceIesSubscriber 0
serviceIesGroup 0
serviceVprnSubscriber used internally.
serviceVprnGroup 0
serviceIesRedundant 0
serviceVprnRedundant 0
serviceVpls 0
serviceIesCem defined on a SAP. --not supported
serviceVprnCem defined on a SAP. --not supported
serviceVprnIPsec 0
serviceVprnIPMirror 0
If an interface would get a default value of 'one', it is not
allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'.
If an interface would get a default value of 'zero', it is not
allowed to modify the value of vRtrIfCpmProtPolicyId.
This object is not supported on SR-1 and ESS-1, where the
value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'."
::= { vRtrIfEntry 68 }
vRtrIfCpmProtUncfgdProtoDropCnt OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of
network control protocol messages dropped due to the operation of the
protocol protection facility.
The protocol protection facility can be enabled and disabled by means
of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg.
When the protocol protection facility is enabled,
network control protocol traffic received on this virtual router
interface is dropped if the protocol is not configured on this virtual
router interface.
The value of vRtrIfProtocol indicates which protocols are configured
on this virtual router interface.
This object is not supported on SR-1 and ESS-1, where the
value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'."
::= { vRtrIfEntry 69 }
vRtrIfLdpSyncTimer OBJECT-TYPE
SYNTAX Unsigned32 (0|1..1800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfLdpSyncTimer specifies a time interval used
for IGP-LDP synchronization. The timer is started from the time the LDP
session to the neighbor is up over the interface. This is to allow
for the label FEC bindings to be exchanged.
When the timer expires, the link cost is restored and is re-advertised.
IGP will announce a new best next-hop and LDP will use it if the
label binding for the neighbor's FEC is available."
DEFVAL { 0 }
::= { vRtrIfEntry 70 }
--
-- Virtual Router ICMPv6 Statistics Table
--
vRtrIcmp6Table OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIcmp6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIcmp6Table table contains statistics
of ICMPv6 messages that are received and sourced by
a router instance."
::= { tmnxVRtrObjs 31 }
vRtrIcmp6Entry OBJECT-TYPE
SYNTAX VRtrIcmp6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the ICMP statistics of a
virtual router instance. Entries are created and deleted
when entries in the vRtrConfEntry are created and deleted."
AUGMENTS { vRtrConfEntry }
::= { vRtrIcmp6Table 1 }
VRtrIcmp6Entry ::=
SEQUENCE {
vRtrIcmp6InMsgs Counter32,
vRtrIcmp6InErrors Counter32,
vRtrIcmp6InDestUnreachs Counter32,
vRtrIcmp6InAdminProhibs Counter32,
vRtrIcmp6InTimeExcds Counter32,
vRtrIcmp6InParmProblems Counter32,
vRtrIcmp6InPktTooBigs Counter32,
vRtrIcmp6InEchos Counter32,
vRtrIcmp6InEchoReplies Counter32,
vRtrIcmp6InRtrSolicits Counter32,
vRtrIcmp6InRtrAdvertisements Counter32,
vRtrIcmp6InNbrSolicits Counter32,
vRtrIcmp6InNbrAdvertisements Counter32,
vRtrIcmp6InRedirects Counter32,
vRtrIcmp6InGrpMembQueries Counter32,
vRtrIcmp6InGrpMembResponses Counter32,
vRtrIcmp6InGrpMembReductions Counter32,
vRtrIcmp6OutMsgs Counter32,
vRtrIcmp6OutErrors Counter32,
vRtrIcmp6OutDestUnreachs Counter32,
vRtrIcmp6OutAdminProhibs Counter32,
vRtrIcmp6OutTimeExcds Counter32,
vRtrIcmp6OutParmProblems Counter32,
vRtrIcmp6OutPktTooBigs Counter32,
vRtrIcmp6OutEchos Counter32,
vRtrIcmp6OutEchoReplies Counter32,
vRtrIcmp6OutRtrSolicits Counter32,
vRtrIcmp6OutRtrAdvertisements Counter32,
vRtrIcmp6OutNbrSolicits Counter32,
vRtrIcmp6OutNbrAdvertisements Counter32,
vRtrIcmp6OutRedirects Counter32,
vRtrIcmp6OutGrpMembQueries Counter32,
vRtrIcmp6OutGrpMembResponses Counter32,
vRtrIcmp6OutGrpMembReductions Counter32
}
vRtrIcmp6InMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InMsgs indicates the total number
of ICMP messages received by this router instance which
includes all those counted by vRtrIcmp6InErrors."
::= { vRtrIcmp6Entry 1 }
vRtrIcmp6InErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InErrors indicates the number of
ICMP messages which this router instance received but determined
as having ICMP-specific errors (bad ICMP checksums, bad length
, etc.)."
::= { vRtrIcmp6Entry 2 }
vRtrIcmp6InDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InDestUnreachs indicates the number of
ICMP Destination Unreachable messages received by this router
instance."
::= { vRtrIcmp6Entry 3 }
vRtrIcmp6InAdminProhibs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InAdminProhibs indicates the number of
ICMP destination unreachable/communication administratively
prohibited messages received by this router instance."
::= { vRtrIcmp6Entry 4 }
vRtrIcmp6InTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InTimeExcds indicates the number of
ICMP Time Exceeded messages received by this router instance."
::= { vRtrIcmp6Entry 5 }
vRtrIcmp6InParmProblems OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InParmProblems indicates the number of
ICMP Parameter Problem messages received by this router instance."
::= { vRtrIcmp6Entry 6 }
vRtrIcmp6InPktTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InPktTooBigs indicates the number of
ICMP Packet Too Big messages received by this router instance."
::= { vRtrIcmp6Entry 7 }
vRtrIcmp6InEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InEchos indicates the number of ICMP
Echo (request) messages received by this router instance."
::= { vRtrIcmp6Entry 8 }
vRtrIcmp6InEchoReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InEchoReplies indicates the number of ICMP
Echo Reply messages received by this router instance."
::= { vRtrIcmp6Entry 9 }
vRtrIcmp6InRtrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP
Router Solicit messages received by this router instance."
::= { vRtrIcmp6Entry 10 }
vRtrIcmp6InRtrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InRtrAdvertisements indicates the number of
ICMP Router Advertisement messages received by this router instance."
::= { vRtrIcmp6Entry 11 }
vRtrIcmp6InNbrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP
Neighbor Solicit messages received by this router instance."
::= { vRtrIcmp6Entry 12 }
vRtrIcmp6InNbrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InNbrAdvertisements indicates the number
of ICMP Neighbor Advertisement messages received by this router
instance."
::= { vRtrIcmp6Entry 13 }
vRtrIcmp6InRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InRedirects indicates number of ICMP
Redirect messages received by this router instance."
::= { vRtrIcmp6Entry 14 }
vRtrIcmp6InGrpMembQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InGrpMembQueries indicates the number of
ICMP Group Membership Query messages received by this router
instance."
::= { vRtrIcmp6Entry 15 }
vRtrIcmp6InGrpMembResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InGrpMembResponses indicates the number of
ICMP Group Membership Response messages received by this router
instance."
::= { vRtrIcmp6Entry 16 }
vRtrIcmp6InGrpMembReductions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6InGrpMembReductions indicates the number of
ICMP Group Membership Reduction messages received by this router
instance."
::= { vRtrIcmp6Entry 17 }
vRtrIcmp6OutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutMsgs indicates the total number of ICMP
messages which this router instance attempted to send. Note that
this counter includes all those counted by icmpOutErrors."
::= { vRtrIcmp6Entry 18 }
vRtrIcmp6OutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutErrors indicates the number of ICMP
messages which this router instance did not send due to problems
discovered within ICMP such as a lack of buffers. This value
should not include errors discovered outside the ICMP layer such
as the inability of VRtrIpv6 to route the resultant datagram. In
some implementations there may be no types of error which contribute
to this counter's value."
::= { vRtrIcmp6Entry 19 }
vRtrIcmp6OutDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP
Destination Unreachable messages sent by this router instance."
::= { vRtrIcmp6Entry 20 }
vRtrIcmp6OutAdminProhibs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP
destination unreachable/communication administratively prohibited
messages sent by this router instance."
::= { vRtrIcmp6Entry 21 }
vRtrIcmp6OutTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP
Time Exceeded messages sent by this router instance."
::= { vRtrIcmp6Entry 22 }
vRtrIcmp6OutParmProblems OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutParmProblems indicates the number of ICMP
Parameter Problem messages sent by this router instance."
::= { vRtrIcmp6Entry 23 }
vRtrIcmp6OutPktTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutPktTooBigs indicates the number
of ICMP Packet Too Big messages sent by this router
instance."
::= { vRtrIcmp6Entry 24 }
vRtrIcmp6OutEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutEchos indicates the number of ICMP
Echo Request messages sent by this router instance."
::= { vRtrIcmp6Entry 25 }
vRtrIcmp6OutEchoReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutEchoReplies indicates the number
of ICMP Echo Reply messages sent by this router instance."
::= { vRtrIcmp6Entry 26 }
vRtrIcmp6OutRtrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutRtrSolicits indicates the number
of ICMP Router Solicitation messages sent by this router
instance."
::= { vRtrIcmp6Entry 27 }
vRtrIcmp6OutRtrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutRtrAdvertisements indicates the
number of ICMP Router Advertisement messages
sent by this router instance."
::= { vRtrIcmp6Entry 28 }
vRtrIcmp6OutNbrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutNbrSolicits indicates the number
of ICMP Neighbor Solicitation messages sent by this router
instance."
::= { vRtrIcmp6Entry 29 }
vRtrIcmp6OutNbrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutNbrAdvertisements indicates the number
of ICMP Neighbor Advertisement messages sent by this router
instance."
::= { vRtrIcmp6Entry 30 }
vRtrIcmp6OutRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutRedirects indicates the number of
ICMP Redirect messages sent by this router instance."
::= { vRtrIcmp6Entry 31 }
vRtrIcmp6OutGrpMembQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutGrpMembQueries indicates the number of
ICMP Group Membership Query messages sent by this router instance."
::= { vRtrIcmp6Entry 32 }
vRtrIcmp6OutGrpMembResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutGrpMembResponses indicates the number of
ICMP Group Membership Response messages sent by this router
instance."
::= { vRtrIcmp6Entry 33 }
vRtrIcmp6OutGrpMembReductions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIcmp6OutGrpMembReductions indicates the number of
ICMP Group Membership Reduction messages sent by this router
instance."
::= { vRtrIcmp6Entry 34 }
--
-- Virtual Router Interface ICMPv6 Statistics Table
--
vRtrIfIcmp6Table OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfIcmp6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfIcmp6Table table contains statistics
of ICMPv6 messages that are received and sourced by
a router interface."
::= { tmnxVRtrObjs 32 }
vRtrIfIcmp6Entry OBJECT-TYPE
SYNTAX VRtrIfIcmp6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the ICMP statistics of a
virtual router interface. Entries are created and deleted
when entries in the vRtrIfTable are created and deleted."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfIcmp6Table 1 }
VRtrIfIcmp6Entry ::=
SEQUENCE {
vRtrIfIcmp6InMsgs Counter32,
vRtrIfIcmp6InErrors Counter32,
vRtrIfIcmp6InDestUnreachs Counter32,
vRtrIfIcmp6InAdminProhibs Counter32,
vRtrIfIcmp6InTimeExcds Counter32,
vRtrIfIcmp6InParmProblems Counter32,
vRtrIfIcmp6InPktTooBigs Counter32,
vRtrIfIcmp6InEchos Counter32,
vRtrIfIcmp6InEchoReplies Counter32,
vRtrIfIcmp6InRtrSolicits Counter32,
vRtrIfIcmp6InRtrAdvertisements Counter32,
vRtrIfIcmp6InNbrSolicits Counter32,
vRtrIfIcmp6InNbrAdvertisements Counter32,
vRtrIfIcmp6InRedirects Counter32,
vRtrIfIcmp6InGrpMembQueries Counter32,
vRtrIfIcmp6InGrpMembResponses Counter32,
vRtrIfIcmp6InGrpMembReductions Counter32,
vRtrIfIcmp6OutMsgs Counter32,
vRtrIfIcmp6OutErrors Counter32,
vRtrIfIcmp6OutDestUnreachs Counter32,
vRtrIfIcmp6OutAdminProhibs Counter32,
vRtrIfIcmp6OutTimeExcds Counter32,
vRtrIfIcmp6OutParmProblems Counter32,
vRtrIfIcmp6OutPktTooBigs Counter32,
vRtrIfIcmp6OutEchos Counter32,
vRtrIfIcmp6OutEchoReplies Counter32,
vRtrIfIcmp6OutRtrSolicits Counter32,
vRtrIfIcmp6OutRtrSolicitsTime TimeStamp,
vRtrIfIcmp6OutRtrAdvertisements Counter32,
vRtrIfIcmp6OutRtrAdvTime TimeStamp,
vRtrIfIcmp6OutNbrSolicits Counter32,
vRtrIfIcmp6OutNbrSolicitsTime TimeStamp,
vRtrIfIcmp6OutNbrAdvertisements Counter32,
vRtrIfIcmp6OutNbrAdvTime TimeStamp,
vRtrIfIcmp6OutRedirects Counter32,
vRtrIfIcmp6OutGrpMembQueries Counter32,
vRtrIfIcmp6OutGrpMembResponses Counter32,
vRtrIfIcmp6OutGrpMembReductions Counter32
}
vRtrIfIcmp6InMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InMsgs indicates the total number
of ICMP messages received by this interface which includes
all those counted by vRtrIfIcmp6InErrors. Note that this
interface is the interface to which the ICMP messages were
addressed which may not be necessarily the input interface
for the messages."
::= { vRtrIfIcmp6Entry 1 }
vRtrIfIcmp6InErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InErrors indicates the number of
ICMP messages which this interface received but determined
as having ICMP-specific errors (bad ICMP checksums, bad length
, etc.)."
::= { vRtrIfIcmp6Entry 2 }
vRtrIfIcmp6InDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InDestUnreachs indicates the number of
ICMP Destination Unreachable messages received by this interface."
::= { vRtrIfIcmp6Entry 3 }
vRtrIfIcmp6InAdminProhibs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InAdminProhibs indicates the number of
ICMP destination unreachable/communication administratively
prohibited messages received by this interface."
::= { vRtrIfIcmp6Entry 4 }
vRtrIfIcmp6InTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InTimeExcds indicates the number of
ICMP Time Exceeded messages received by this interface."
::= { vRtrIfIcmp6Entry 5 }
vRtrIfIcmp6InParmProblems OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InParmProblems indicates the number of
ICMP Parameter Problem messages received by this interface."
::= { vRtrIfIcmp6Entry 6 }
vRtrIfIcmp6InPktTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InPktTooBigs indicates the number of
ICMP Packet Too Big messages received by this interface."
::= { vRtrIfIcmp6Entry 7 }
vRtrIfIcmp6InEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InEchos indicates the number of ICMP
Echo (request) messages received by this interface."
::= { vRtrIfIcmp6Entry 8 }
vRtrIfIcmp6InEchoReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP
Echo Reply messages received by this interface."
::= { vRtrIfIcmp6Entry 9 }
vRtrIfIcmp6InRtrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP
Router Solicit messages received by this interface."
::= { vRtrIfIcmp6Entry 10 }
vRtrIfIcmp6InRtrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of
ICMP Router Advertisement messages received by this interface."
::= { vRtrIfIcmp6Entry 11 }
vRtrIfIcmp6InNbrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP
Neighbor Solicit messages received by this interface."
::= { vRtrIfIcmp6Entry 12 }
vRtrIfIcmp6InNbrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InNbrAdvertisements indicates the number
of ICMP Neighbor Advertisement messages received by this interface."
::= { vRtrIfIcmp6Entry 13 }
vRtrIfIcmp6InRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InRedirects indicates number of ICMP
Redirect messages received by this interface."
::= { vRtrIfIcmp6Entry 14 }
vRtrIfIcmp6InGrpMembQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InGrpMembQueries indicates the number of
ICMP Group Membership Query messages received by this interface."
::= { vRtrIfIcmp6Entry 15 }
vRtrIfIcmp6InGrpMembResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InGrpMembResponses indicates the number of
ICMP Group Membership Response messages received by this interface."
::= { vRtrIfIcmp6Entry 16 }
vRtrIfIcmp6InGrpMembReductions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6InGrpMembReductions indicates the number of
ICMP Group Membership Reduction messages received by this interface."
::= { vRtrIfIcmp6Entry 17 }
vRtrIfIcmp6OutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP
messages which this interface attempted to send. Note that this
counter includes all those counted by icmpOutErrors."
::= { vRtrIfIcmp6Entry 18 }
vRtrIfIcmp6OutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutErrors indicates the number of ICMP
messages which this interface did not send due to problems discovered
within ICMP such as a lack of buffers. This value should not include
errors discovered outside the ICMP layer such as the inability of
VRtrIpv6 to route the resultant datagram. In some implementations
there may be no types of error which contribute to this counter's
value."
::= { vRtrIfIcmp6Entry 19 }
vRtrIfIcmp6OutDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP
Destination Unreachable messages sent by this interface."
::= { vRtrIfIcmp6Entry 20 }
vRtrIfIcmp6OutAdminProhibs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP
destination unreachable/communication administratively prohibited
messages sent by this interface."
::= { vRtrIfIcmp6Entry 21 }
vRtrIfIcmp6OutTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP
Time Exceeded messages sent by this interface."
::= { vRtrIfIcmp6Entry 22 }
vRtrIfIcmp6OutParmProblems OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP
Parameter Problem messages sent by this interface."
::= { vRtrIfIcmp6Entry 23 }
vRtrIfIcmp6OutPktTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP
Packet Too Big messages sent by this interface."
::= { vRtrIfIcmp6Entry 24 }
vRtrIfIcmp6OutEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutEchos indicates the number of ICMP
Echo Request messages sent by this interface."
::= { vRtrIfIcmp6Entry 25 }
vRtrIfIcmp6OutEchoReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutEchoReplies indicates the number
of ICMP Echo Reply messages sent by this interface."
::= { vRtrIfIcmp6Entry 26 }
vRtrIfIcmp6OutRtrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutRtrSolicits indicates the number
of ICMP Router Solicitation messages sent by this interface."
::= { vRtrIfIcmp6Entry 27 }
vRtrIfIcmp6OutRtrSolicitsTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system
time when the last router solicitation message was sent by this
interface."
::= { vRtrIfIcmp6Entry 28 }
vRtrIfIcmp6OutRtrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutRtrAdvertisements indicates the
number of ICMP Router Advertisement messages
sent by this interface."
::= { vRtrIfIcmp6Entry 29 }
vRtrIfIcmp6OutRtrAdvTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutRtrAdvTime indicates the system
time when the last router advertisement message was sent by
this interface."
::= { vRtrIfIcmp6Entry 30 }
vRtrIfIcmp6OutNbrSolicits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutNbrSolicits indicates the number
of ICMP Neighbor Solicitation messages sent by this interface."
::= { vRtrIfIcmp6Entry 31 }
vRtrIfIcmp6OutNbrSolicitsTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system
time when the last neighbor solicitation message was sent by this
interface."
::= { vRtrIfIcmp6Entry 32 }
vRtrIfIcmp6OutNbrAdvertisements OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number
of ICMP Neighbor Advertisement messages sent by this interface."
::= { vRtrIfIcmp6Entry 33 }
vRtrIfIcmp6OutNbrAdvTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutNbrAdvTime indicates the system
time when the last neighbor advertisement message was sent by
this interface."
::= { vRtrIfIcmp6Entry 34 }
vRtrIfIcmp6OutRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutRedirects indicates the number of
ICMP Redirect messages sent by this interface."
::= { vRtrIfIcmp6Entry 35 }
vRtrIfIcmp6OutGrpMembQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of
ICMP Group Membership Query messages sent by this interface."
::= { vRtrIfIcmp6Entry 36 }
vRtrIfIcmp6OutGrpMembResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of
ICMP Group Membership Response messages sent by this interface."
::= { vRtrIfIcmp6Entry 37 }
vRtrIfIcmp6OutGrpMembReductions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of
ICMP Group Membership Reduction messages sent by this interface."
::= { vRtrIfIcmp6Entry 38 }
--
-- Virtual Router Interface Bi-directional Forwarding Detection table
--
vRtrIfBfdTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfBfdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfBfdTable table contains the configuration for
Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry
with the same indices."
::= { tmnxVRtrObjs 33 }
vRtrIfBfdEntry OBJECT-TYPE
SYNTAX VRtrIfBfdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the BFD configuration for an
interface. Entries are created and deleted when entries
in the vRtrIfTable are created and deleted."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfBfdTable 1 }
VRtrIfBfdEntry ::=
SEQUENCE {
vRtrIfBfdAdminState TmnxAdminState,
vRtrIfBfdTransmitInterval Unsigned32,
vRtrIfBfdReceiveInterval Unsigned32,
vRtrIfBfdMultiplier Unsigned32,
vRtrIfBfdEchoInterval Unsigned32
}
vRtrIfBfdAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrIfBfdAdminState specifies the admin state of
BFD on this interface. When it is 'inService', BFD sessions can be
established on this interface. When it is 'outOfService', they
cannot."
::= { vRtrIfBfdEntry 1 }
vRtrIfBfdTransmitInterval OBJECT-TYPE
SYNTAX Unsigned32 (100..100000) --100..100k
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrIfBfdTransmitInterval specifies the BFD transmit
interval over this interface."
DEFVAL { 100 }
::= { vRtrIfBfdEntry 2 }
vRtrIfBfdReceiveInterval OBJECT-TYPE
SYNTAX Unsigned32 (100..100000) --100..100k
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrIfBfdReceiveInterval specifies the BFD receive
interval over this interface."
DEFVAL { 100 }
::= { vRtrIfBfdEntry 3 }
vRtrIfBfdMultiplier OBJECT-TYPE
SYNTAX Unsigned32 (3..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrIfBfdMultiplier specifies the the number of
consecutive BFD messages that must be missed from the peer before
the BFD session state is changed to down and the upper level
protocols (OSPF, IS-IS or PIM) are notified of the fault."
DEFVAL { 3 }
::= { vRtrIfBfdEntry 4 }
vRtrIfBfdEchoInterval OBJECT-TYPE
SYNTAX Unsigned32 (0|100..100000) --100..100k
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrIfBfdEchoInterval specifies the BFD echo
interval over this interface."
DEFVAL { 0 }
::= { vRtrIfBfdEntry 5 }
--
-- Virtual Router BFD session table
--
vRtrIfBfdSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfBfdSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfBfdSessionTable table contains per BFD session statistics
and operational settings."
::= { tmnxVRtrObjs 34 }
vRtrIfBfdSessionEntry OBJECT-TYPE
SYNTAX VRtrIfBfdSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a BFD session. Entries are created
automatically by the system, or when a static-route is
configured to use BFD."
INDEX {
vRtrID,
vRtrIfIndex,
vRtrIfBfdSessionLclAddrType,
vRtrIfBfdSessionLclAddr,
vRtrIfBfdSessionRemAddrType,
vRtrIfBfdSessionRemAddr
}
::= { vRtrIfBfdSessionTable 1 }
VRtrIfBfdSessionEntry ::=
SEQUENCE {
vRtrIfBfdSessionLclAddrType InetAddressType,
vRtrIfBfdSessionLclAddr InetAddress,
vRtrIfBfdSessionRemAddrType InetAddressType,
vRtrIfBfdSessionRemAddr InetAddress,
vRtrIfBfdSessionOperState TmnxOperState,
vRtrIfBfdSessionState INTEGER,
vRtrIfBfdSessionOperFlags BITS,
vRtrIfBfdSessionMesgRecv Counter32,
vRtrIfBfdSessionMesgSent Counter32,
vRtrIfBfdSessionLastDownTime TimeStamp,
vRtrIfBfdSessionLastUpTime TimeStamp,
vRtrIfBfdSessionUpCount Counter32,
vRtrIfBfdSessionDownCount Counter32,
vRtrIfBfdSessionLclDisc Unsigned32,
vRtrIfBfdSessionRemDisc Unsigned32,
vRtrIfBfdSessionProtocols BITS,
vRtrIfBfdSessionTxInterval Unsigned32,
vRtrIfBfdSessionRxInterval Unsigned32,
vRtrIfBfdSessionType INTEGER
}
vRtrIfBfdSessionLclAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionLclAddrType indicates the address
type in vRtrIfBfdSessionLclAddr."
::= { vRtrIfBfdSessionEntry 1 }
vRtrIfBfdSessionLclAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionLclAddr indicates the address of the
local endpoint of this BFD session. Its type is specified by
vRtrIfBfdSessionLclAddrType."
::= { vRtrIfBfdSessionEntry 2 }
vRtrIfBfdSessionRemAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionRemAddrType indicates the address
type in vRtrIfBfdSessionRemAddr."
::= { vRtrIfBfdSessionEntry 3 }
vRtrIfBfdSessionRemAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionRemAddr indicates the address of the
local endpoint of this BFD session. Its type is specified by
vRtrIfBfdSessionRemAddrType."
::= { vRtrIfBfdSessionEntry 4 }
vRtrIfBfdSessionOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionOperState indicates the operational state
of BFD on this interface."
::= { vRtrIfBfdSessionEntry 5 }
vRtrIfBfdSessionState OBJECT-TYPE
SYNTAX INTEGER {
adminDown (0), --Session is administratively down
down (1), --Session is down
init (2), --Session is initializing
up (3) --Session is up
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionState indicates the state of the BFD
protocl on this interface."
::= { vRtrIfBfdSessionEntry 6 }
vRtrIfBfdSessionOperFlags OBJECT-TYPE
SYNTAX BITS {
noProtocols (0),
noHeartBeat (1),
echoFailed (2),
nbrSignalDown (3),
fwdPlaneReset (4),
pathDown (5),
nbrAdminDown (6),
adminClear (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD
session is not up."
::= { vRtrIfBfdSessionEntry 7 }
vRtrIfBfdSessionMesgRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionMesgRecv indicates the number of messages
received in this session."
::= { vRtrIfBfdSessionEntry 8 }
vRtrIfBfdSessionMesgSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionMesgSent indicates the number of messages
sent in this session."
::= { vRtrIfBfdSessionEntry 9 }
vRtrIfBfdSessionLastDownTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionLastDownTime indicates the system time
when this session last went down."
::= { vRtrIfBfdSessionEntry 10 }
vRtrIfBfdSessionLastUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionLastUpTime indicates the system time
when this session last came up."
::= { vRtrIfBfdSessionEntry 11 }
vRtrIfBfdSessionUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionUpCount indicates the number of times
vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'."
::= { vRtrIfBfdSessionEntry 12 }
vRtrIfBfdSessionDownCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionDownCount indicates the number of times
vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'."
::= { vRtrIfBfdSessionEntry 13 }
vRtrIfBfdSessionLclDisc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionLclDisc indicates the unique local
discriminator for this session."
::= { vRtrIfBfdSessionEntry 14 }
vRtrIfBfdSessionRemDisc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionRemDisc indicates the remote
discriminator for this session."
::= { vRtrIfBfdSessionEntry 15 }
vRtrIfBfdSessionProtocols OBJECT-TYPE
SYNTAX BITS {
ospfv2 (0),
pim (1),
isis (2),
staticRoute (3),
mcRing (4),
rsvp (5),
bgp (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionProtocols indicates which protocols
are using this BFD session."
::= { vRtrIfBfdSessionEntry 16 }
vRtrIfBfdSessionTxInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionTxInterval indicates the negotiated
transmit interval. This value is the minimum of the local node's
'vRtrIfBfdTransmitInterval' and the remote node's receive interval."
::= { vRtrIfBfdSessionEntry 17 }
vRtrIfBfdSessionRxInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionRxInterval indicates the negotiated
receive interval. This value is the minimum of the local node's
'vRtrIfBfdReceiveInterval' and the remote node's transmit interval."
::= { vRtrIfBfdSessionEntry 18 }
vRtrIfBfdSessionType OBJECT-TYPE
SYNTAX INTEGER {
iom (1), --Session is running on IOM
cpm (2) --Session is running on CPM
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfBfdSessionType indicates if the bfd session is
running on IOM or CPM."
::= { vRtrIfBfdSessionEntry 19 }
--
-- Alcatel 7x50 SR series Virtual Router Interface Proxy ARP Table
--
-- Augmentation of the vRtrIfTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship
-- between the base table, vRtrIfTable, and the augmenting table,
-- vRtrIfProxyArpTable. This in effect extends the vRtrIfTable with
-- additional columns. Creation (or deletion) of a row in the
-- vRtrIfTable results in the same fate for the row in the
-- vRtrIfProxyArpTable.
--
vRtrIfProxyArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfProxyArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfProxyArpTable provides an extension to the vRtrIfTable.
It has an entry for each virtual router interface configured in
the system."
::= { tmnxVRtrObjs 18 }
vRtrIfProxyArpEntry OBJECT-TYPE
SYNTAX VRtrIfProxyArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents information related to Proxy ARP for a
virtual router interface in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfProxyArpTable 1 }
VRtrIfProxyArpEntry ::=
SEQUENCE {
vRtrIfProxyArp TruthValue,
vRtrIfProxyArpLocal TruthValue,
vRtrIfProxyArpPolicy1 TPolicyStatementNameOrEmpty,
vRtrIfProxyArpPolicy2 TPolicyStatementNameOrEmpty,
vRtrIfProxyArpPolicy3 TPolicyStatementNameOrEmpty,
vRtrIfProxyArpPolicy4 TPolicyStatementNameOrEmpty,
vRtrIfProxyArpPolicy5 TPolicyStatementNameOrEmpty
}
vRtrIfProxyArp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrIfProxyArp is set to 'true', proxy ARP is
enabled on this interface. If this value is 'false', proxy ARP
is disabled on the interface."
DEFVAL { false }
::= { vRtrIfProxyArpEntry 1 }
vRtrIfProxyArpLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrIfProxyArpLocal is set to 'true', local proxy
ARP is enabled, that is, the interface will reply to ARP requests
even if both the hosts are on the same subnet. In this case ICMP
redirects will be disabled. If the value of vRtrIfProxyArpLocal
is set to 'false', the interface will not reply to ARP requests
if both the hosts are on the same subnet."
DEFVAL { false }
::= { vRtrIfProxyArpEntry 2 }
vRtrIfProxyArpPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyArpPolicy1 is used to specify the first
proxy ARP policy for this interface. This policy determines
networks and sources for which proxy ARP will be attempted. If
this value is set to an empty string, ''H, the interface does
not have a proxy ARP policy associated with it.
The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp
is set to 'false'."
DEFVAL { ''H } -- the empty string
::= { vRtrIfProxyArpEntry 3 }
vRtrIfProxyArpPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyArpPolicy2 is used to specify the second
proxy ARP policy for this interface. This policy determines
networks and sources for which proxy ARP will be attempted. If
this value is set to an empty string, ''H, the interface does
not have a proxy ARP policy associated with it.
The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp
is set to 'false'."
DEFVAL { ''H } -- the empty string
::= { vRtrIfProxyArpEntry 4 }
vRtrIfProxyArpPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyArpPolicy3 is used to specify the third
proxy ARP policy for this interface. This policy determines
networks and sources for which proxy ARP will be attempted. If
this value is set to an empty string, ''H, the interface does
not have a proxy ARP policy associated with it.
The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp
is set to 'false'."
DEFVAL { ''H } -- the empty string
::= { vRtrIfProxyArpEntry 5 }
vRtrIfProxyArpPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyArpPolicy4 is used to specify the fourth
proxy ARP policy for this interface. This policy determines
networks and sources for which proxy ARP will be attempted. If
this value is set to an empty string, ''H, the interface does
not have a proxy ARP policy associated with it.
The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp
is set to 'false'."
DEFVAL { ''H } -- the empty string
::= { vRtrIfProxyArpEntry 6 }
vRtrIfProxyArpPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyArpPolicy5 is used to specify the fifth
proxy ARP policy for this interface. This policy determines
networks and sources for which proxy ARP will be attempted. If
this value is set to an empty string, ''H, the interface does
not have a proxy ARP policy associated with it.
The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp
is set to 'false'."
DEFVAL { ''H } -- the empty string
::= { vRtrIfProxyArpEntry 7 }
--
-- Alcatel 7x50 SR series Virtual Router Interface DHCP Relay Table
--
-- Augmentation of the vRtrIfTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship
-- between the base table, vRtrIfTable, and the augmenting table,
-- vRtrIfDHCPTable. This in effect extends the vRtrIfTable with
-- additional columns. Creation (or deletion) of a row in the
-- vRtrIfTable results in the same fate for the row in the
-- vRtrIfDHCPTable.
--
vRtrIfDHCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfDHCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfDHCPTable is used to configure the interface
parameters for the DHCP Relay agent."
::= { tmnxVRtrObjs 19 }
vRtrIfDHCPEntry OBJECT-TYPE
SYNTAX VRtrIfDHCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents information related to DHCP Relay for a
virtual router interface in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfDHCPTable 1 }
VRtrIfDHCPEntry ::=
SEQUENCE {
vRtrIfDHCPRelayInfoOption TruthValue,
vRtrIfDHCPRelayInfoAction INTEGER,
vRtrIfDHCPRelayCircuitId INTEGER,
vRtrIfDHCPRelayRemoteId INTEGER,
vRtrIfDHCPAutoFilter Unsigned32,
vRtrIfDHCPRelayServer1 IpAddress,
vRtrIfDHCPRelayServer2 IpAddress,
vRtrIfDHCPRelayServer3 IpAddress,
vRtrIfDHCPRelayServer4 IpAddress,
vRtrIfDHCPRelayServer5 IpAddress,
vRtrIfDHCPRelayServer6 IpAddress,
vRtrIfDHCPRelayServer7 IpAddress,
vRtrIfDHCPRelayServer8 IpAddress,
vRtrIfDHCPRelayTrusted TruthValue,
vRtrIfDHCPAdminState TmnxAdminState,
vRtrIfDHCPSnooping INTEGER,
vRtrIfDHCPDescription TItemDescription,
vRtrIfDHCPAutoFilterId TFilterID,
vRtrIfDHCPOperAutoFilter Unsigned32,
vRtrIfDHCPAuthPolicy TPolicyStatementNameOrEmpty,
vRtrIfDHCPLeasePopulate Unsigned32,
vRtrIfDHCPOperLeasePopulate Unsigned32,
vRtrIfDHCPGiAddressType InetAddressType,
vRtrIfDHCPGiAddress InetAddress,
vRtrIfDHCPGiAddressAsSrc TruthValue,
vRtrIfDHCPMatchOption82 TruthValue,
vRtrIfDHCPRelayRemoteIdStr DisplayString,
vRtrIfDHCPProxyAdminState TmnxAdminState,
vRtrIfDHCPProxyServerAddr IpAddress,
vRtrIfDHCPProxyLeaseTime Unsigned32,
vRtrIfDHCPProxyLTRadiusOverride TruthValue,
vRtrIfDHCPVendorIncludeOptions BITS,
vRtrIfDHCPVendorOptionString DisplayString,
vRtrIfDHCPLayer2Header TruthValue,
vRtrIfDHCPAntiSpoofMacAddr MacAddress,
vRtrIfDHCPClientApplications BITS
}
vRtrIfDHCPRelayInfoOption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP
Option 82. If the value of this object is set to 'false', DHCP
Relay is disabled."
DEFVAL { false }
::= { vRtrIfDHCPEntry 1 }
vRtrIfDHCPRelayInfoAction OBJECT-TYPE
SYNTAX INTEGER {
replace (1),
drop (2),
keep (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay
reforwarding policy.
replace(1) - replace existing information with
DHCP relay information
drop(2) - discard messages with existing relay information if
the option-82 information is also present.
keep(3) - retain the existing relay information."
DEFVAL { keep }
::= { vRtrIfDHCPEntry 2 }
vRtrIfDHCPRelayCircuitId OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ifIndex (1),
asciiTuple (2),
sapId (3),
vlanAsciiTuple (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCPRelayCircuitId specifies whether or
not the circuit-id suboption is present, and if it is present what
information goes in it.
If the value of this object is set to 'none', the circuit-id suboption
will not be part of the information option (option 82).
If the value of this object is set to 'ifIndex', the value of the
interface index is used.
If the value of this object is set to 'asciiTuple', the ASCII-encoded
concatenated tuple consisting of the
- access-node-identifier
- service-id
- interface-name
- SAP-id (only if the value of vRtrIfType is 'serviceIesGroup')
is used.
If the value of this object is set to 'sapId', the ASCII-encoded
SAP-id is used.
If the value of this object is set to 'vlan-ascii-tuple' - the format
will include VLAN-id and dot1p bits in addition to what is included in
ascii-tuple already. The format is supported on dot1q and qinq
encapsulated ports only. Thus, when the option 82 bits are
stripped, dot1p bits will be copied to the Ethernet header of an
outgoing packet."
DEFVAL { asciiTuple }
::= { vRtrIfDHCPEntry 3 }
vRtrIfDHCPRelayRemoteId OBJECT-TYPE
SYNTAX INTEGER {
mac (1),
none (2),
remote-id (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPRelayRemoteId specifies what information goes
into the remote-id suboption in the DHCP Relay packet. If the
value of this object is set to 'none', the remote-id suboption is
left blank. If the value of this object is set to 'mac',
the MAC address of the remote end is encoded in the suboption. If the
value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr
will be the remote-id."
DEFVAL { none }
::= { vRtrIfDHCPEntry 4 }
vRtrIfDHCPAutoFilter OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrIfDHCPAutoFilter allows the router to automatically build
anti-spoofing filter lists. When this object is set to a non-zero
value, auto-filtering is enabled and a filter allowing only
PPPoE or DHCP traffic is established on the interface. The non-zero
value indicates the maximum number of entries that the auto-filter
can have. These entries are created by the agent upon snooping a
valid DHCP Reply packet and are used to allow traffic sourced by
the given DHCP-assigned IP address."
DEFVAL { 0 }
::= { vRtrIfDHCPEntry 5 }
vRtrIfDHCPRelayServer1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer1 is used to configure the first DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { vRtrIfDHCPEntry 6 }
vRtrIfDHCPRelayServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer2 is used to configure the second DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 7 }
vRtrIfDHCPRelayServer3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer3 is used to configure the third DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 8 }
vRtrIfDHCPRelayServer4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 9 }
vRtrIfDHCPRelayServer5 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 10 }
vRtrIfDHCPRelayServer6 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 11 }
vRtrIfDHCPRelayServer7 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 12 }
vRtrIfDHCPRelayServer8 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server
where the requests will be forwarded."
DEFVAL { '00000000'H }
::= { vRtrIfDHCPEntry 13 }
vRtrIfDHCPRelayTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the
router will relay requests where the DHCP giaddr is zero."
DEFVAL { false }
::= { vRtrIfDHCPEntry 14 }
vRtrIfDHCPAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrIfDHCPAdminState is used to configure the desired
administrative state of DHCP on this interface.
If the value of vRtrIfType is network this object can only be set
to 'outOfService'."
DEFVAL { outOfService }
::= { vRtrIfDHCPEntry 15 }
vRtrIfDHCPSnooping OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP
packets received on interface."
DEFVAL { disabled }
::= { vRtrIfDHCPEntry 16 }
vRtrIfDHCPDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPDescription is a user provided description
string for DHCP on this virtual router interface. It can consist of
any printable, seven-bit ASCII characters up to 80 characters in
length."
DEFVAL { ''H } -- the empty string
::= { vRtrIfDHCPEntry 17 }
vRtrIfDHCPAutoFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being
used for this interface."
::= { vRtrIfDHCPEntry 18 }
vRtrIfDHCPOperAutoFilter OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of vRtrIfDHCPOperAutoFilter indicates the number of active
auto-filter entries per interface. These entries are created in the
ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping
valid 'DHCP ACK' messages."
DEFVAL { 0 }
::= { vRtrIfDHCPEntry 19 }
vRtrIfDHCPAuthPolicy OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines which subscriber authentication policy must be applied when a
subscriber message (e.g. DHCP, PPPoE, ...) is received on the
interface.
The authentication policy must be defined in tmnxSubAuthPlcyTable."
DEFVAL { ''H }
::= { vRtrIfDHCPEntry 20 }
vRtrIfDHCPLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCPLeasePopulate specifies the
maximum number of DHCP lease states allowed on this interface."
DEFVAL { 0 }
::= { vRtrIfDHCPEntry 21 }
vRtrIfDHCPOperLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCPOperLeasePopulate indicates the
maximum number of DHCP lease states allocated on this interface."
::= { vRtrIfDHCPEntry 22 }
vRtrIfDHCPGiAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPGiAddressType specifies the type of
vRtrIfDHCPGiAddress, the gateway interface address."
DEFVAL { unknown }
::= { vRtrIfDHCPEntry 23 }
vRtrIfDHCPGiAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPGiAddress specifies the gateway interface
address. The type of this address is specified by the value of
vRtrIfDHCPGiAddressType."
DEFVAL { ''H }
::= { vRtrIfDHCPEntry 24 }
vRtrIfDHCPGiAddressAsSrc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP
relay should use the gateway interface address as the source IP
address when communicating with the DHCP server. When it is set
to 'true(1)', the source IP address used to communicate with the DHCP
server is the gateway interface address. When it is 'false', the
source IP is the IP of the egress interface the IP packet goes
out on."
DEFVAL { false }
::= { vRtrIfDHCPEntry 25 }
vRtrIfDHCPMatchOption82 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPMatchOption82 specifies whether the
DHCP relay should use the circuit ID in the option 82 field
in DHCP packets to match DHCP messages. When it is set to 'true(1)',
the option 82 circuit ID is used in addition to the MAC address and
transaction ID. When it is set to 'false', only the MAC address and
transaction ID are used."
DEFVAL { false }
::= { vRtrIfDHCPEntry 26 }
vRtrIfDHCPRelayRemoteIdStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id
in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set
to 'remote-id'."
DEFVAL { "" }
::= { vRtrIfDHCPEntry 27 }
vRtrIfDHCPProxyAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPProxyAdminState specifies the desired
administrative state of the proxy server on this interface.
When it is set to 'inService', the proxy server is enabled only if
vRtrIfDHCPAdminState is also set to 'inService'."
DEFVAL { outOfService }
::= { vRtrIfDHCPEntry 28 }
vRtrIfDHCPProxyServerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPProxyServerAddr specifies the IP address
which will be used as the source address of the emulated DHCP server.
If this IP address is not configured, the value of vRiaIpAddress
will be used as the source address of the emulated DHCP server."
DEFVAL { '00000000'H } -- 0.0.0.0 means not-set
::= { vRtrIfDHCPEntry 29 }
vRtrIfDHCPProxyLeaseTime OBJECT-TYPE
SYNTAX Unsigned32 (0|300..315446399)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a
DHCP client is allowed to use the offered IP address.
Value 0 means the lease time provided by a RADIUS or an upstream DHCP
server will not be overridden. A lease time of 7 days is used when
RADIUS does not provide a lease time."
DEFVAL { 0 }
::= { vRtrIfDHCPEntry 30 }
vRtrIfDHCPProxyLTRadiusOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not
the lease time provided by the RADIUS server is presented to the DHCP
client.
By default the proxy-server will always make use of
vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is
provided from the RADIUS server.
When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the
proxy-server will use the lease time information provided by the
RADIUS server, regardless of the configured one."
DEFVAL { false }
::= { vRtrIfDHCPEntry 31 }
vRtrIfDHCPVendorIncludeOptions OBJECT-TYPE
SYNTAX BITS {
systemId (0),
clientMac (1),
serviceId (2),
sapId (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPVendorIncludeOptions specifies what is
encoded in the Alcatel vendor specific sub-option of option 82.
The value of this object is only used when vRtrIfDHCPRelayInfoAction
is 'replace(1)'."
DEFVAL { { systemId } }
::= { vRtrIfDHCPEntry 32 }
vRtrIfDHCPVendorOptionString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPVendorOptionString specifies the string that
goes into the Alcatel vendor specific sub-option of option 82.
This string is only used when vRtrIfDHCPRelayInfoAction is set to
'replace(1)'."
DEFVAL { "" }
::= { vRtrIfDHCPEntry 33 }
vRtrIfDHCPLayer2Header OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPLayer2Header specificies,
together with the value of object vRtrIfDHCPAntiSpoofMacAddr,
the MAC address that is used in anti-spoof entries for the lease
states on this interface.
When it is set to 'false (2)', the client hardware address from the
DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr,
is used.
When it is set to 'true (1)', the behavior depends on the value of
vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to
all zeros, the source MAC address in the L2 header of the DHCP packet
is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value
is used."
DEFVAL { false }
::= { vRtrIfDHCPEntry 34 }
vRtrIfDHCPAntiSpoofMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPAntiSpoofMacAddr specifies,
together with the value of object vRtrIfDHCPLayer2Header,
the MAC address that is used in anti-spoof entries for the lease
states on this interface.
When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware
address from the DHCP payload, stored in
ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used.
When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object
is all zeros, the source MAC address in the L2 header of the DHCP
packet is used.
When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object
is not all zeros, then this value is used.
This object can only be configured if the value of object
vRtrIfDHCPLayer2Header is set to 'true (1)'."
DEFVAL { '000000000000'H }
::= { vRtrIfDHCPEntry 35 }
vRtrIfDHCPClientApplications OBJECT-TYPE
SYNTAX BITS {
dhcp (0),
pppoe (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfDHCPClientApplications specifies the set of
client applications that can make use of the DHCP relay functionality
on this interface."
DEFVAL { { dhcp } }
::= { vRtrIfDHCPEntry 36 }
--
-- DHCP Relay Statistics Table
--
vRtrIfDHCPRelayStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfDHCPRelayStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfDHCPRelayStatsTable contains the statistics for the
DHCP Relay agent."
::= { tmnxVRtrObjs 20 }
vRtrIfDHCPRelayStatsEntry OBJECT-TYPE
SYNTAX VRtrIfDHCPRelayStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents information related to DHCP Relay statistics
for a virtual router interface in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfDHCPRelayStatsTable 1 }
VRtrIfDHCPRelayStatsEntry ::=
SEQUENCE {
vRtrIfDHCPRelayRxPkts Counter32,
vRtrIfDHCPRelayTxPkts Counter32,
vRtrIfDHCPRelayRxMalformedPkts Counter32,
vRtrIfDHCPRelayRxUntrustedPkts Counter32,
vRtrIfDHCPRelayClientPktsDiscarded Counter32,
vRtrIfDHCPRelayClientPktsRelayed Counter32,
vRtrIfDHCPRelayServerPktsDiscarded Counter32,
vRtrIfDHCPRelayServerPktsRelayed Counter32,
vRtrIfDHCPRelayAuthPktsDiscarded Counter32,
vRtrIfDHCPRelayAuthPktsSuccess Counter32,
vRtrIfDHCPRelayClientPktsSnooped Counter32,
vRtrIfDHCPRelayServerPktsSnooped Counter32,
vRtrIfDHCPRelayClientPktsProxRad Counter32,
vRtrIfDHCPRelayClientPktsProxLS Counter32,
vRtrIfDHCPRelayPktsGenRelease Counter32,
vRtrIfDHCPRelayPktsGenForceRenew Counter32
}
vRtrIfDHCPRelayRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayRxPkts indicates the total number of packets received
by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 1 }
vRtrIfDHCPRelayTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted
by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 2 }
vRtrIfDHCPRelayRxMalformedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayRxMalformedPkts indicates the total number of
malformed packets received by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 3 }
vRtrIfDHCPRelayRxUntrustedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of
untrusted packets received by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 4 }
vRtrIfDHCPRelayClientPktsDiscarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of
client packets dicarded by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 5 }
vRtrIfDHCPRelayClientPktsRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayClientPktsRelayed indicates the total number of
client packets relayed by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 6 }
vRtrIfDHCPRelayServerPktsDiscarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of
server packets discarded by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 7 }
vRtrIfDHCPRelayServerPktsRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServerPktsRelayed indicates the total number of
server packets relayed by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 8 }
vRtrIfDHCPRelayAuthPktsDiscarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of
packets discarded because authentication was not successful."
::= { vRtrIfDHCPRelayStatsEntry 9 }
vRtrIfDHCPRelayAuthPktsSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of
packets for which authentication was successful."
::= { vRtrIfDHCPRelayStatsEntry 10 }
vRtrIfDHCPRelayClientPktsSnooped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayClientPktsSnooped indicates the total number of
client packets snooped by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 11 }
vRtrIfDHCPRelayServerPktsSnooped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayServerPktsSnooped indicates the total number of
server packets snooped by the DHCP relay agent."
::= { vRtrIfDHCPRelayStatsEntry 12 }
vRtrIfDHCPRelayClientPktsProxRad OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayClientPktsProxRad indicates the total number of
client packets proxied by the DHCP relay agent based on data received
from a RADIUS server."
::= { vRtrIfDHCPRelayStatsEntry 13 }
vRtrIfDHCPRelayClientPktsProxLS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayClientPktsProxLS indicates the total number of
client packets proxied by the DHCP relay agent based on a lease
state. The lease itself can have been obtained from a DHCP or RADIUS
server. This is the so called lease split functionality."
::= { vRtrIfDHCPRelayStatsEntry 14 }
vRtrIfDHCPRelayPktsGenRelease OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP
RELEASE messages spoofed by the DHCP relay agent to the DHCP server."
::= { vRtrIfDHCPRelayStatsEntry 15 }
vRtrIfDHCPRelayPktsGenForceRenew OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP
FORCERENEW messages spoofed by the DHCP relay agent to the DHCP
clients."
::= { vRtrIfDHCPRelayStatsEntry 16 }
--
-- Virtual Router Interface DHCP Lease State Table
--
vRtrIfDHCPLeaseStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfDHCPLeaseStateEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a
virtual router interface in the system.
The content of this table is moved to the
ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLeaseStateTable."
::= { tmnxVRtrObjs 22 }
vRtrIfDHCPLeaseStateEntry OBJECT-TYPE
SYNTAX VRtrIfDHCPLeaseStateEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"DHCP lease state information for a virtual router interface."
INDEX { vRtrID,
vRtrIfIndex,
vRtrIfDHCPLseStateCiAddr
}
::= { vRtrIfDHCPLeaseStateTable 1 }
VRtrIfDHCPLeaseStateEntry ::=
SEQUENCE {
vRtrIfDHCPLseStateCiAddr IpAddress,
vRtrIfDHCPLseStateChAddr MacAddress,
vRtrIfDHCPLseStateRemainLseTime Unsigned32,
vRtrIfDHCPLseStateOption82 OCTET STRING,
vRtrIfDHCPLseStatePersistKey Unsigned32
}
vRtrIfDHCPLseStateCiAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP
address of the DHCP lease state."
::= { vRtrIfDHCPLeaseStateEntry 1 }
vRtrIfDHCPLseStateChAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC
address of the DHCP lease state."
::= { vRtrIfDHCPLeaseStateEntry 2 }
vRtrIfDHCPLseStateRemainLseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the
remaining lease time of the IP address of the DHCP lease state."
::= { vRtrIfDHCPLeaseStateEntry 3 }
vRtrIfDHCPLseStateOption82 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "vRtrIfDHCPLseStateOption82 indicates the content of the
Option82 for this DHCP lease state."
::= { vRtrIfDHCPLeaseStateEntry 4 }
vRtrIfDHCPLseStatePersistKey OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of the object vRtrIfDHCPLseStatePersistKey indicates a
key value that can be used to track this lease state in the
persistence file."
::= { vRtrIfDHCPLeaseStateEntry 5 }
--
-- Alcatel 7x50 SR series Virtual Router Interface IPv6 DHCP Relay Table
--
-- Augmentation of the vRtrIfTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship
-- between the base table, vRtrIfTable, and the augmenting table,
-- vRtrIfDHCP6RelayTable. This in effect extends the vRtrIfTable with
-- additional columns. Creation (or deletion) of a row in the
-- vRtrIfTable results in the same fate for the row in the
-- vRtrIfDHCP6RelayTable.
--
vRtrIfDHCP6TableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6TableLastChanged indicates
the time of the last change to any row of vRtrIfDHCP6Table"
::= { tmnxVRtrObjs 35 }
vRtrIfDHCP6Table OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfDHCP6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfDHCP6Table is used to configure the interface parameters
for the DHCP6 Relay agent."
::= { tmnxVRtrObjs 36 }
vRtrIfDHCP6Entry OBJECT-TYPE
SYNTAX VRtrIfDHCP6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents information related to DHCP6 Relay for a
virtual router interface in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfDHCP6Table 1 }
VRtrIfDHCP6Entry ::=
SEQUENCE {
vRtrIfDHCP6LastChanged TimeStamp,
vRtrIfDHCP6AdminState TmnxAdminState,
vRtrIfDHCP6OperState INTEGER,
vRtrIfDHCP6Description TItemDescription,
vRtrIfDHCP6RelayServer1 InetAddressIPv6z,
vRtrIfDHCP6RelayServer2 InetAddressIPv6z,
vRtrIfDHCP6RelayServer3 InetAddressIPv6z,
vRtrIfDHCP6RelayServer4 InetAddressIPv6z,
vRtrIfDHCP6RelayServer5 InetAddressIPv6z,
vRtrIfDHCP6RelayServer6 InetAddressIPv6z,
vRtrIfDHCP6RelayServer7 InetAddressIPv6z,
vRtrIfDHCP6RelayServer8 InetAddressIPv6z,
vRtrIfDHCP6RelayItfIdOption INTEGER,
vRtrIfDHCP6LeasePopulate Unsigned32,
vRtrIfDHCP6CurrLeasePopulate Unsigned32,
vRtrIfDHCP6SourceAddress InetAddressIPv6,
vRtrIfDHCP6EnableNgbrResolution TruthValue,
vRtrIfDHCP6RemoteIdOption TruthValue,
vRtrIfDHCP6PfxdAdminState INTEGER,
vRtrIfDHCP6ServerMaxLeaseStates Unsigned32,
vRtrIfDHCP6CurrServerLeaseStates Unsigned32,
vRtrIfDHCP6ItfIdString DisplayString
}
vRtrIfDHCP6LastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6LastChanged indicates the time of
the last change to this row of VRtrIfDHCP6Entry."
::= { vRtrIfDHCP6Entry 1 }
vRtrIfDHCP6AdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6AdminState specifies the desired
administrative status of the DHCP6 relay agent on this interface.
The value can only be set to inService if the value of vRtrIfType
is serviceIesGroup.
The value noop(3) is never allowed."
DEFVAL { outOfService }
::= { vRtrIfDHCP6Entry 2 }
vRtrIfDHCP6OperState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
noIPv6Pfx (3),
noServerConfigured (4),
noValidSourceAddr (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6OperState indicates the current
operational state of the DHCP6 relay agent on this interface.
Following value are possible:
up (1) - the DHCP6 relay agent is running.
down (2), - the DHCP6 relay agent is administratively disabled.
noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as
no ipv6 prefix is assigned to this link.
noServerConfigured(4) - the DHCP6 relay agent cannot be operational
as no DHCP6 servers are configured.
noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational
because a source address has been configured
and the address is not local to this node."
::= { vRtrIfDHCP6Entry 3 }
vRtrIfDHCP6Description OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6Description specifies a user
provided description string for DHCP6 relay agent on this virtual
router interface.
It can consist of any printable, seven-bit ASCII characters up to
80 characters in length."
DEFVAL { ''H } -- the empty string
::= { vRtrIfDHCP6Entry 4 }
vRtrIfDHCP6RelayServer1 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer1 specifies the first
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 5 }
vRtrIfDHCP6RelayServer2 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 6 }
vRtrIfDHCP6RelayServer3 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 7 }
vRtrIfDHCP6RelayServer4 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 8 }
vRtrIfDHCP6RelayServer5 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 9 }
vRtrIfDHCP6RelayServer6 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 10 }
vRtrIfDHCP6RelayServer7 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 11 }
vRtrIfDHCP6RelayServer8 OBJECT-TYPE
SYNTAX InetAddressIPv6z
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th
DHCP6 server where the DHCP6 requests will be forwarded to."
DEFVAL { '0000000000000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 12 }
vRtrIfDHCP6RelayItfIdOption OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ifIndex (1),
asciiTuple (2),
sapId (3),
string (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether
or not the interface-id option is added by the DHCP6 relay agent,
and, if it is present, what information goes in it.
If the value of this object is set to 'none', the option is not added
by the relay agent. In all other cases the option is added to the relay
message. The content of the option is defined as follows:
- 'ifIndex' - the value of the interface index is used.
- 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the
- access-node-identifier
- service-id
- interface-name
- SAP-id (only if the value of vRtrIfType is 'serviceIesGroup')
- 'sapId' - the ASCII-encoded SAP-id is used.
- 'string' - the value of the object vRtrIfDHCP6ItfIdString
is used.
"
DEFVAL { none }
::= { vRtrIfDHCP6Entry 13 }
vRtrIfDHCP6LeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6LeasePopulate specifies the
maximum number of lease states allocated by the DHCP6 relay function,
allowed on this interface."
DEFVAL { 0 }
::= { vRtrIfDHCP6Entry 14 }
vRtrIfDHCP6CurrLeasePopulate OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the
number of lease states currently allocated on this interface by
the DHCP6 relay function."
::= { vRtrIfDHCP6Entry 15 }
vRtrIfDHCP6SourceAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6SourceAddress specifies the ipv6
address that will be used by the DHCP6 relay agent as source IP
address in all messages sent to the DHCP6 servers.
If set to ::, the system will use the IPv6 address assigned on the
link on which the relay message is sent out, if such an address is
defined. As a last resort the system Ipv6 address is taken."
DEFVAL { '00000000000000000000000000000000'H }
::= { vRtrIfDHCP6Entry 16 }
vRtrIfDHCP6EnableNgbrResolution OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6EnableNgbrResolution specifies
whether or not neighbor resolution via DHCP6 Relay must be enabled
on this interface.
This feature is similar to the arp-populate feature in ipv4."
DEFVAL { false }
::= { vRtrIfDHCP6Entry 17 }
vRtrIfDHCP6RemoteIdOption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6RemoteIdOption specifies
whether or not the remote Id option is sent to the DHCP6 server.
The client DUID is used as remoteId."
DEFVAL { false }
::= { vRtrIfDHCP6Entry 18 }
vRtrIfDHCP6PfxdAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdAdminState specifies the
administrative state of the row. If set to enabled, this
IPv6 prefix will be delegated by the system."
DEFVAL { disabled }
::= { vRtrIfDHCP6Entry 19 }
vRtrIfDHCP6ServerMaxLeaseStates OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies
the maximum number of lease states installed by the DHCP6 server
function allowed on this interface."
DEFVAL { 8000 }
::= { vRtrIfDHCP6Entry 20 }
vRtrIfDHCP6CurrServerLeaseStates OBJECT-TYPE
SYNTAX Unsigned32 (0..8000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the
number of lease states currently allocated on this interface
by the DHCP6 server function."
::= { vRtrIfDHCP6Entry 21 }
vRtrIfDHCP6ItfIdString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6ItfIdString specifies the string
that will be put in the interface-id option added by the relay agent.
This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption
is set to string(4)."
::= { vRtrIfDHCP6Entry 22 }
--
-- Alcatel 7x50 SR series Virtual Router Interface Name to vRtrIfIndex Mapping
-- Table
--
vRtrIfNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a read-only table, each row of which represents a one to
one equivalence between a router interface name (vRtrIfName)
and its corresponding index in the vRtrIfTable (vRtrIfIndex)."
::= { tmnxVRtrObjs 5}
vRtrIfNameEntry OBJECT-TYPE
SYNTAX VRtrIfNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrIfNameTable corresponds to a row
in the vRtrIfTable. When an entry is created or deleted in the
vRtrIfTable, a corresponding entry is created or deleted in this
table."
INDEX { vRtrID, IMPLIED vRtrIfName }
::= { vRtrIfNameTable 1 }
VRtrIfNameEntry ::=
SEQUENCE {
vRtrIfNameIndex InterfaceIndex
}
vRtrIfNameIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfNameIndex gives the value of vRtrIfIndex
for a row in the vRtrIfTable. This row corresponds to the
virtual router interface which has interface name as vRtrIfName.
Every vRtrIfName is unique within a specific instance of vRtrID."
::= { vRtrIfNameEntry 1 }
--
-- Virtual Router IP Address Table
--
vRtrIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIpAddrTable has an entry for each IP address configured
for a virtual router in the system. An interface on the
virtual router may have more than one IP address assigned to
it."
::= { tmnxVRtrObjs 6 }
vRtrIpAddrEntry OBJECT-TYPE
SYNTAX VRtrIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an IP address assigned a virtual
router interface. Entries can be created and deleted via
SNMP SET operations. Setting RowStatus to 'active' requires
a values for all column variables to have been assigned."
INDEX { vRtrID, vRtrIfIndex, vRiaIndex }
::= { vRtrIpAddrTable 1 }
VRtrIpAddrEntry ::=
SEQUENCE {
vRiaIndex INTEGER,
vRiaRowStatus RowStatus,
vRiaIpAddress IpAddress,
vRiaNetMask IpAddress,
vRiaBcastAddrFormat INTEGER,
vRiaReasmMaxSize INTEGER,
vRiaIgpInhibit TruthValue,
vRiaInetAddressType InetAddressType,
vRiaInetAddress InetAddress,
vRiaInetPrefixLen InetAddressPrefixLength,
vRiaInetAddrState TmnxInetAddrState,
vRiaInetEui64 TruthValue,
vRiaInetOperAddress InetAddress,
vRiaInetGwAddressType InetAddressType,
vRiaInetGwAddress InetAddress,
vRiaInetRemoteIpType InetAddressType,
vRiaInetRemoteIp InetAddress
}
vRiaIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique value which identifies this IP address entry for
this interface of this virtual router in the Tmnx system.
Those row entries with vRiaIndex = 1 represent the primary
IP address for the interface identified by the vRtrID and
vRtrIfIndex pair. Row entries with other values for vRiaIndex
are secondary IP addresses. There must always be a primary
IP address assigned an interface. This implies that if the
primary address row is deleted, the secondary rows are also
deleted."
::= { vRtrIpAddrEntry 1 }
vRiaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control
of vRtrIpAddrTable entries. All the other row variables
must have been assigned values before the row can be
place into the 'active' state."
::= { vRtrIpAddrEntry 2 }
vRiaIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address assigned to a router's interface."
::= { vRtrIpAddrEntry 3 }
vRiaNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this
entry. The value of the mask is an IP address with all
the network bits set to 1 and all the host bits set to
0."
DEFVAL { 'FFFFFF00'H } -- 255.255.255.0
::= { vRtrIpAddrEntry 4 }
vRiaBcastAddrFormat OBJECT-TYPE
SYNTAX INTEGER {
allOnes (1),
hostOnes (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRiaBcastAddrFormat is set to 'allOnes', the
255.255.255.255 address is used for local broadcast.
When vRiaBcastAddrFormat is set to 'hostOnes', the
<prefix>-1 address is used for the local broadcast.
For example for subnet 10.10.16.0/20 the <prefix>-1
address is 10.10.31.255."
DEFVAL { hostOnes }
::= { vRtrIpAddrEntry 5 }
vRiaReasmMaxSize OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the largest IP datagram which this entry
can reassemble from incoming IP fragmented datagrams
received on this interface."
::= { vRtrIpAddrEntry 6 }
vRiaIgpInhibit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable should only be associated with secondary
ip addresses, i.e., when the value of vRiaIndex is other
than 1. When vRiaIgpInhibit has a value of 'true',
it indicates that the given secondary IP address should
not be recognized as a local interface by the running IGP.
For OSPF and IS-IS, this means that the given secondary
IP addresses will not be injected as passive interfaces
and will not be advertised as internal IP interfaces into
the IGP's link state database. For RIP this means these
secondary IP interfaces will not source RIP updates."
::= { vRtrIpAddrEntry 7 }
vRiaInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRiaInetAddressType specifies the type of the
vRiaInetAddress address assigned to a router's interface."
::= { vRtrIpAddrEntry 8 }
vRiaInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of this address is determined by the value of
the vRiaInetAddressType object.
vRiaInetAddress indicates the IPv4/IPv6 address assigned
to a router's interface."
::= { vRtrIpAddrEntry 9 }
vRiaInetPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRiaInetPrefixLen specifies the length of
the IP netmask for this interface address."
::= { vRtrIpAddrEntry 10 }
vRiaInetAddrState OBJECT-TYPE
SYNTAX TmnxInetAddrState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRiaInetAddrState indicates the address
state of the IPv6 address of the interface."
::= { vRtrIpAddrEntry 11 }
vRiaInetEui64 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRiaInetEui64 specifies whether the
vRiaInetOperAddress is an eui64 address. This object
can only be set at creation time.
When vRiaInetEui64 is 'true', then the vRiaInetOperAddress
is derived from the vRiaInetAddress and the physical address
of the interface this address is attached to. vRiaInetAddress
has to have all zeros the least significant 8 bytes. Also,
vRiaInetPrefixLen cannot be longer than 64.
When vRiaInetEui64 is 'false', then the vRiaInetOperAddress
is a copy of vRiaInetAddress. The value is always 'false' when
vRiaInetAddressType is not 'ipv6'."
DEFVAL { false }
::= { vRtrIpAddrEntry 12 }
vRiaInetOperAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRiaInetOperAddress indicates the operational
address of this entry. The type of this address is determined
by the value of the vRiaInetAddressType object."
::= { vRtrIpAddrEntry 13 }
vRiaInetGwAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRiaInetGwAddressType specifies the address type
of vRiaInetGwAddress."
DEFVAL { unknown }
::= { vRtrIpAddrEntry 14 }
vRiaInetGwAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRiaInetGwAddress specifies the gateway address
for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen.
The address type is defined by vRiaInetGwAddressType. This field
is only valid when the address is configured on a subscriber
interface."
DEFVAL { ''H }
::= { vRtrIpAddrEntry 15 }
vRiaInetRemoteIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRiaInetRemoteIpType specifies the address type
of vRiaInetRemoteIp."
DEFVAL { unknown }
::= { vRtrIpAddrEntry 16 }
vRiaInetRemoteIp OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRiaInetRemoteIp specifies the IP address of the remote
redundant interface. This field is only valid when the address is
configured on a redundant interface."
DEFVAL { ''H }
::= { vRtrIpAddrEntry 17 }
--
-- Augmentation of the IP-FORWARD-MIB ipCidrRouteTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
-- the base table, ipCidrRouteTable, and the augmenting table,
-- vRtrIpCidrRouteTable. This in effect extends the ipCidrRouteTable with
-- additional columns. Creation (or deletion) of a row in the
-- ipCidrRouteTable results in the same fate for the row in the
-- vRtrIpCidrRouteTable.
--
vRtrIpCidrRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIpCidrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable
in the IP-FORWARD-MIB."
::= { tmnxVRtrObjs 7 }
vRtrIpCidrRouteEntry OBJECT-TYPE
SYNTAX VRtrIpCidrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrIpCidrRouteTable represents additional
columns for attributes specific to the Alcatel 7x50 SR series
implementation for the IP route table."
AUGMENTS { ipCidrRouteEntry }
::= { vRtrIpCidrRouteTable 1 }
VRtrIpCidrRouteEntry ::=
SEQUENCE {
vRtrIpCidrRouteLastEnabledTime TimeStamp,
vRtrIpCidrRoutePreference Unsigned32,
vRtrIpCidrRouteMetric Unsigned32
}
vRtrIpCidrRouteLastEnabledTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime
value when ipCidrRouteStatus was last set to active (1) to
allow IP forwarding on this route entry."
::= { vRtrIpCidrRouteEntry 1 }
vRtrIpCidrRoutePreference OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When ipCidrRouteProto has a value of 'netmgmt' to indicate that
this entry is a static route, the value of
vRtrIpCidrRoutePreference determines the priority of this
static route versus the routes from different sources such as
BGP or OSPF etc.
Different protocols should not be configured with the same
preference, if this occurs the tiebreaker is determined per the
default preference value as defined in the table below.
If multiple routes are learned with an identical preference
using the same protocol, the lowest cost is used. If multiple
routes are learned with an identical preference using the same
protocol and the costs (metrics) are equal, then the decision
as to what route to use is determined by the configuration of
the ecmp command.
Default preferences:
Route Type Preference Configurable
---------- ---------- ------------
Direct attached 0 no
Static-route 5 yes
MPLS (post FCS) 7
OSPF Internal routes 10 no
OSPF External 150 yes
BGP 170 yes
"
DEFVAL { 5 }
::= { vRtrIpCidrRouteEntry 2 }
vRtrIpCidrRouteMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary routing metric for this route. The semantics
of this metric are determined by the routing-protocol specified
in the route's ipCidrRouteProto value."
::= { vRtrIpCidrRouteEntry 3 }
-- Virtual router Static Route Table
-- The Virtual router Static Route Table maintains both active and inactive
-- static routes that have been configured by the network manager.
-- It adds knowledge of the autonomous system of the next hop, multiple
-- next hops, and policy routing, and Classless Inter-Domain Routing.
-- Active entries are also represented in the IP-FORWARD-MIB ipCidrTable.
vRtrStaticRouteNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current vRtrStaticRouteTable entries that are 'active'."
::= { tmnxVRtrObjs 8 }
vRtrStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's Static Routing table."
::= { tmnxVRtrObjs 9 }
vRtrStaticRouteEntry OBJECT-TYPE
SYNTAX VRtrStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination, through a
particular next hop."
INDEX {
vRtrID,
vRtrStaticRouteDest,
vRtrStaticRouteMask,
vRtrStaticRouteIndex
}
::= { vRtrStaticRouteTable 1 }
VRtrStaticRouteEntry ::=
SEQUENCE {
vRtrStaticRouteDest IpAddress,
vRtrStaticRouteMask IpAddress,
vRtrStaticRouteIndex INTEGER,
vRtrStaticRouteRowStatus RowStatus,
vRtrStaticRouteLastEnabledTime TimeStamp,
vRtrStaticRouteStatus INTEGER,
vRtrStaticRouteStaticType INTEGER,
vRtrStaticRoutePreference Unsigned32,
vRtrStaticRouteMetric Unsigned32,
vRtrStaticRouteEgressIfIndex InterfaceIndexOrZero,
vRtrStaticRouteNextHop IpAddress,
vRtrStaticRouteNextHopUnnumberedIf DisplayString,
vRtrStaticRouteAdminState TmnxAdminState,
vRtrStaticRouteIgpShortcut BITS,
vRtrStaticRouteDisallowIgp TruthValue,
vRtrStaticRouteTag Unsigned32
}
vRtrStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D) address value.
Any assignment (implicit or otherwise) of an instance of this object to
a value x must be rejected if the bitwise logical-AND of x with the
value of the corresponding instance of the vRtrStaticRouteMask object
is not equal to x."
::= { vRtrStaticRouteEntry 1 }
vRtrStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the destination address
before being compared to the value in the vRtrStaticRouteDest field.
For those systems that do not support arbitrary subnet masks, an
agent constructs the value of the vRtrStaticRouteMask by reference
to the IP Address Class.
Any assignment (implicit or otherwise) of an instance of this object
to a value x must be rejected if the bitwise logical-AND of x with the
value of the corresponding instance of the vRtrStaticRouteDest object is
not equal to vRtrStaticRouteDest."
::= { vRtrStaticRouteEntry 2 }
vRtrStaticRouteIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The quaternary index for the vRtrStaticRouteTable."
::= { vRtrStaticRouteEntry 3 }
vRtrStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { vRtrStaticRouteEntry 4 }
vRtrStaticRouteLastEnabledTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime
value when vRtrStaticRouteStatus was last set to active (1) to
allow IP forwarding on this static route entry."
::= { vRtrStaticRouteEntry 5 }
vRtrStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrStaticRouteStatus indicates whether or not this
route entry is active in the system. When an interface
transitions to the down state, any associated route entries
are marked as 'inactive' and are usually not displayed in a
standard route table listing. When the interface transitions
to the up state, the agent marks the associated routes as
'active'"
::= { vRtrStaticRouteEntry 6 }
vRtrStaticRouteStaticType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
nextHop (1),
indirect (2),
blackHole (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrStaticRouteStaticType indicates the
type of static route represented by this row entry."
DEFVAL { unknown }
::= { vRtrStaticRouteEntry 7 }
vRtrStaticRoutePreference OBJECT-TYPE
SYNTAX Unsigned32 (1..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrStaticRoutePreference determines the priority
of this static route versus the routes from different sources
such as BGP or OSPF etc.
Different protocols should not be configured with the same
preference, if this occurs the tiebreaker is determined per the
default preference value as defined in the table below.
If multiple routes are learned with an identical preference
using the same protocol, the lowest cost is used. If multiple
routes are learned with an identical preference using the same
protocol and the costs (metrics) are equal, then the decision
as to what route to use is determined by the configuration of
the ecmp command.
Default preferences.
Route Type Preference Configurable
---------- ---------- ------------
Direct attached 0 no
Static-route 5 yes
MPLS (post FCS) 7
OSPF Internal routes 10 no
OSPF External 150 yes
BGP 170 yes
"
DEFVAL { 5 }
::= { vRtrStaticRouteEntry 8 }
vRtrStaticRouteMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When ipCidrRouteProto has a value of 'netmgmt' to indicate that
this entry is a static route, the value of vRtrStaticRouteMetric
associates a metric value with the route. This value is used
when importing this static route into other protocols such as
OSPF. When the metric is configured as zero then the metric
configured in OSPF, default-import-metric, applies. This value
is also used to determine which static route to install in the
forwarding table:
If there are multiple static routes with the same preference
but unequal metric then the lower cost (metric) route will be
installed.
If there are multiple static routes with equal preference and
metrics then ecmp rules apply.
If there are multiple routes with unequal preference then the
lower preference route will be installed.
"
DEFVAL { 1 }
::= { vRtrStaticRouteEntry 9 }
vRtrStaticRouteEgressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The outgoing ifIndex for this route as computed by the
static-route module. This variable will have a value of 0
if vRtrStaticRouteStatus is 'inactive' or if this static
route is configured as a black hole."
::= { vRtrStaticRouteEntry 11 }
vRtrStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In case of remote routes, the address of the next system en route.
This member is complemented by vRtrStaticRouteNextHopUnnumberedIf.
Atmost only one of them can be non-null. If vRtrStaticRouteNextHop
is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null
string then this static route is configured as a black hole."
::= { vRtrStaticRouteEntry 12 }
vRtrStaticRouteNextHopUnnumberedIf OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the unnumbered Interface which will be the nexthop for
this route. This member is complemented by vRtrStaticRouteNextHop.
Atmost only one of them can be non-null. If vRtrStaticRouteNextHop
is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null
string then this static route is configured as a black hole."
::= { vRtrStaticRouteEntry 13 }
vRtrStaticRouteAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state for this virtual router static route"
DEFVAL { inService }
::= { vRtrStaticRouteEntry 14 }
vRtrStaticRouteIgpShortcut OBJECT-TYPE
SYNTAX BITS {
te(0),
ldp(1),
ip(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrStaticRouteIgpShortcut is valid only for indirect
static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The
bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling
mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts
associated with that tunneling mechanism will be used to resolve
next-hop for the static-route. If no bits are set, IGP shortcuts
will not be used to resolve next-hop for the static routes.
The tunneling mechanisms represented by each bit are:
te(0) - RSVP Traffic Engineering
ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC)
ip(2) - IP (IP-in-IP or GRE)
Evaluation of tunnel preference is based on the following order, in
descending priority:
1. Traffic Engineered Shortcut (RSVP-TE)
2. LDP /32 Route FEC Shortcut
3. IP Shortcut (IP-in-IP or GRE)
4. Actual IGP Next-Hop."
DEFVAL { { } }
::= { vRtrStaticRouteEntry 15 }
vRtrStaticRouteDisallowIgp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrStaticRouteDisallowIgp is valid only for indirect
static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If
the value of vRtrStaticRouteDisallowIgp is set to 'true', and if
none of the defined tunneling mechanisms (RSVP-TE, LDP or IP)
qualify as a next-hop, the normal IGP next-hop to the indirect
next-hop address will not be used. If the value is set to 'false',
IGP next-hop to the indirect next-hop address can be used as the
next-hop of the last resort."
DEFVAL { false }
::= { vRtrStaticRouteEntry 16 }
vRtrStaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrStaticRouteTag is used to add a 32-bit integer tag
to the static route. This tag could then be used in route policies
to control distribution of the route into other protocols. A value
of 0 indicates that the tag has not been set."
DEFVAL { 0 }
::= { vRtrStaticRouteEntry 17 }
--
-- Virtual Router Service Interface IP Address Range table
--
vRtrSvcIpRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrSvcIpRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrSvcIpRangeTable has an entry for each IP address
range configured for a virtual interface in a virtual router
in the system. An interface on the virtual router may have
more than one Service IP address ranges assigned to it."
::= { tmnxVRtrObjs 10 }
vRtrSvcIpRangeEntry OBJECT-TYPE
SYNTAX VRtrSvcIpRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an IP address range assigned a
virtual router service interface. Entries can be created
and deleted via SNMP SET operations. Setting RowStatus to
'active' requires values for all column variables to have
been assigned."
INDEX { vRtrID, vRtrSvcIpRangeAddress, vRtrSvcIpRangeMask }
::= { vRtrSvcIpRangeTable 1 }
VRtrSvcIpRangeEntry ::=
SEQUENCE {
vRtrSvcIpRangeAddress IpAddress,
vRtrSvcIpRangeMask Unsigned32,
vRtrSvcIpRangeRowStatus RowStatus,
vRtrSvcIpRangeExclusive TruthValue
}
vRtrSvcIpRangeAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address prefix range assigned to a router's service
interface."
::= { vRtrSvcIpRangeEntry 1 }
vRtrSvcIpRangeMask OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask associated with the Service IP address of this
entry. The value of the mask is an 32-bit integer with all
the network bits set to 1 and all the host bits set to 0."
::= { vRtrSvcIpRangeEntry 2 }
vRtrSvcIpRangeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation, deletion, or control
of vRtrSvcIpRangeTable entries."
::= { vRtrSvcIpRangeEntry 3 }
vRtrSvcIpRangeExclusive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrSvcIpRangeExclusive has a value of 'true', this
set of addresses is reserved for services only and cannot be
assigned to network ports. When it has a value of 'false',
it could be used for services as well as network ports."
DEFVAL { false }
::= { vRtrSvcIpRangeEntry 4 }
--
-- Augmentation of the IP-MIB ipNetToMediaTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
-- the base table, ipNetToMediaTable, and the augmenting table,
-- vRtrIpNetToMediaTable. This in effect extends the ipNetToMediaTable with
-- additional columns. Creation (or deletion) of a row in the
-- ipNetToMediaTable results in the same fate for the row in the
-- vRtrIpNetToMediaTable.
--
vRtrIpNetToMediaTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIpNetToMediaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIpNetToMediaTable provides an extension of the
ipNetToMediaTable in the IP-MIB."
::= { tmnxVRtrObjs 11 }
vRtrIpNetToMediaEntry OBJECT-TYPE
SYNTAX VRtrIpNetToMediaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrIpNetToMediaTable represents additional
columns for attributes specific to the Alcatel 7x50 SR series
implementation for the vRtrIpNetToMediaTable."
AUGMENTS { ipNetToMediaEntry }
::= { vRtrIpNetToMediaTable 1 }
VRtrIpNetToMediaEntry ::=
SEQUENCE {
vRtrIpNetToMediaTimer Unsigned32,
vRtrIpNetToMediaOperState TmnxOperState
}
vRtrIpNetToMediaTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIpNetToMediaTimer determines how much longer an ARP
entry associated with an vRtrIpNetToMediaTable entry remains in the ARP
cache. It is initially set to vRtrIfArpTimeout. When
vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared
from the cache."
::= { vRtrIpNetToMediaEntry 1 }
vRtrIpNetToMediaOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIpNetToMediaOperState specifies if the ARP entry is
being used actively in the ARP Table. When ipNetToMediaType has a
value 'dynamic', vRtrIpNetToMediaOperState will never have a value of
'outOfService'."
::= { vRtrIpNetToMediaEntry 2 }
--
-- VRtr instance aggregation objects
--
vRtrInstanceAggregationTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last change to the vRtrInstanceAggregationTable
either from adding a row or removing a row."
::= { tmnxVRtrObjs 12 }
vRtrInstanceAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrInstanceAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrInstanceAggregationTable is the list of configured
VRtr aggregations and their operational status information.
Specifies the route aggregates that should be generated
into the virtual router if at least one contributing route
(more specific) is learned.
A route could match multiple aggregate statements.
For instance, with the following entries:
aggregate 10.0.0.0/8
aggregate 10.1.0.0/16
If the route 10.1.1.0/24 is learned, both aggregates would be
generated."
::= { tmnxVRtrObjs 13 }
vRtrInstanceAggregationEntry OBJECT-TYPE
SYNTAX VRtrInstanceAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the vRtrInstanceAggregationTable.
Entries are created by user. Entries are destroyed by user."
INDEX { vRtrID, vRtrAggregationIpPrefix, vRtrAggregationIpPrefixMask }
::= { vRtrInstanceAggregationTable 1 }
VRtrInstanceAggregationEntry ::= SEQUENCE {
vRtrAggregationIpPrefix IpAddress,
vRtrAggregationIpPrefixMask IpAddressPrefixLength,
vRtrAggregationRowStatus RowStatus,
vRtrAggregationLastChanged TimeStamp,
vRtrAggregationSummaryOnly TruthValue,
vRtrAggregationASSet TruthValue,
vRtrAggregationAggregatorAS TmnxBgpAutonomousSystem,
vRtrAggregationAggregatorIPAddr IpAddress,
vRtrAggregationOperState TmnxOperState
}
vRtrAggregationIpPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address prefix to match for the aggregation."
::= { vRtrInstanceAggregationEntry 1 }
vRtrAggregationIpPrefixMask OBJECT-TYPE
SYNTAX IpAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mask length for vRtrAggregationIpPrefix, to match for the
aggregation."
::= { vRtrInstanceAggregationEntry 2 }
vRtrAggregationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for this entry."
::= { vRtrInstanceAggregationEntry 3 }
vRtrAggregationLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time stamp of last change of any object for this entry."
::= { vRtrInstanceAggregationEntry 4 }
vRtrAggregationSummaryOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When true(1), only the aggregate is advertised, the more
specfic routes that make up the aggregate are not.
When false(2), both the aggregate and more specific
components are advertised."
DEFVAL { false }
::= { vRtrInstanceAggregationEntry 5 }
vRtrAggregationASSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When true(1), the AS-Path of the resulting aggregate will contain
an AS-SET containing all AS numbers from the contributing routes.
When false(2), the AS-Path will contain no AS-SET and will be
originated by the ESR."
DEFVAL { false }
::= { vRtrInstanceAggregationEntry 6 }
vRtrAggregationAggregatorAS OBJECT-TYPE
SYNTAX TmnxBgpAutonomousSystem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrAggregationAggregatorAS is set to non zero, and
vRtrAggregationAggregatorIPAddr is set to non-zero,
the supplied ASN and IP address will be used for the aggregator path
attributes.
When omitted, automatically uses its own ASN & Router-ID."
DEFVAL { 0 }
::= { vRtrInstanceAggregationEntry 7 }
vRtrAggregationAggregatorIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When vRtrAggregationAggregatorAS is set to non zero, and
vRtrAggregationAggregatorIPAddr is set to non-zero,
the supplied ASN and IP address will be used for the aggregator path
attributes.
When omitted, automatically uses its own ASN & Router-ID."
DEFVAL { '00000000'H } -- 0.0.0.0 means not-set
::= { vRtrInstanceAggregationEntry 8 }
vRtrAggregationOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrAggregationOperState specifies the current operational status
of the aggregation entry."
::= { vRtrInstanceAggregationEntry 9 }
--
-- Static Route Index Table
--
-- A read-only table which suggests the available index - vRtrStaticRouteIndex
-- for a given set of vRtrID, vRtrStaticRouteDest & vRtrStaticRouteMask.
-- vRtrStaticRouteIndex will be the fourth index while configuring an entry
-- into the vRtrStaticRouteTable.
vRtrStaticRouteIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrStaticRouteIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's Static Route Index Table."
::= { tmnxVRtrObjs 14 }
vRtrStaticRouteIndexEntry OBJECT-TYPE
SYNTAX VRtrStaticRouteIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The available index for the vRtrStaticRouteTable for every
destination per virtual router."
INDEX {
vRtrID,
vRtrStaticRouteIndexDest,
vRtrStaticRouteIndexMask
}
::= { vRtrStaticRouteIndexTable 1 }
VRtrStaticRouteIndexEntry ::=
SEQUENCE {
vRtrStaticRouteIndexDest IpAddress,
vRtrStaticRouteIndexMask IpAddress,
vRtrStaticRouteAvailableIndex TestAndIncr
}
vRtrStaticRouteIndexDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this index entry.
This object may not take a Multicast (Class D) address value.
Any assignment (implicit or otherwise) of an instance of this
object to a value x must be rejected if the bitwise logical-AND of
x with the value of the corresponding instance of the
vRtrStaticRouteMask object is not equal to x."
::= { vRtrStaticRouteIndexEntry 1 }
vRtrStaticRouteIndexMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the destination address
before being compared to the value in the vRtrStaticRouteDest
field. For those systems that do not support arbitrary subnet
masks, an agent constructs the value of the vRtrStaticRouteMask by
reference to the IP Address Class. Any assignment (implicit or
otherwise) of an instance of this object to a value x must be
rejected if the bitwise logical-AND of x with the value of the
corresponding instance of the vRtrStaticRouteDest object is not
equal to vRtrStaticRouteDest."
::= { vRtrStaticRouteIndexEntry 2 }
vRtrStaticRouteAvailableIndex OBJECT-TYPE
SYNTAX TestAndIncr (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available quaternary index for the vRtrStaticRouteTable."
::= { vRtrStaticRouteIndexEntry 3 }
--
-- Tunnel Table
--
vRtrTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrTunnelTable maintains a list of tunnels for the specific router
instance."
::= { tmnxVRtrObjs 17 }
vRtrTunnelEntry OBJECT-TYPE
SYNTAX VRtrTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrTunnelEntry defines a tunnel to a particular destination in a
specific router context. A tunnel to a specific destination could
established using GRE, LDP, RSVP or could be a static LSP."
INDEX {
vRtrID,
vRtrTunnelDest,
vRtrTunnelMask,
vRtrTunnelPreference,
vRtrTunnelType,
vRtrTunnelID,
vRtrTunnelNexthop
}
::= { vRtrTunnelTable 1 }
VRtrTunnelEntry ::=
SEQUENCE {
vRtrTunnelDest IpAddress,
vRtrTunnelMask IpAddress,
vRtrTunnelPreference Unsigned32,
vRtrTunnelType TmnxTunnelType,
vRtrTunnelID TmnxTunnelID,
vRtrTunnelNexthop IpAddress,
vRtrTunnelMetric Unsigned32,
vRtrTunnelAge Integer32
}
vRtrTunnelDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrTunnelDest maintains the destination IP address of this tunnel.
This object may not take a Multicast (Class D) address value.
Any assignment (implicit or otherwise) of an instance of this object
to a value x must be rejected if the bitwise logical-AND of x with the
value of the corresponding instance of the vRtrTunnelMask object is not
equal to x."
::= { vRtrTunnelEntry 1 }
vRtrTunnelMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrTunnelMask indicates the mask to be logical-ANDed with the
destination address before being compared to the value in the
vRtrTunnelDest field. For those systems that do not support arbitrary
subnet masks, an agent constructs the value of the vRtrTunnelMask
by reference to the IP Address Class.
Any assignment (implicit or otherwise) of an instance of this object
to a value x must be rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the ipCidrRouteDest object
is not equal to ipCidrRouteDest."
::= { vRtrTunnelEntry 2 }
vRtrTunnelPreference OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrTunnelPreference determines the priority of this
tunnel versus the other tunnels from different sources such as LDP,
RSVP, GRE etc. This is an absolute number used internally by the
system to specify preferences for the tunnel.
Lowest number signifies the most preferred entry in the table."
::= { vRtrTunnelEntry 3 }
vRtrTunnelType OBJECT-TYPE
SYNTAX TmnxTunnelType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of this tunnel entity."
::= { vRtrTunnelEntry 4 }
vRtrTunnelID OBJECT-TYPE
SYNTAX TmnxTunnelID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional index provided to distinguish between multiple tunnels to
same destination having same characteristics.
There could be multiple tunnels for the type 'sdp'. In such cases the
vRtrTunnelID will hold the SDP Id.
There could be multiple tunnels for the type 'ldp'. In such cases the
vRtrTunnelID will hold the LSPId of the LSP in use.
For other vRtrTunnelType values this field will always be 0 as only a
single tunnel is established using other tunnel types."
::= { vRtrTunnelEntry 5 }
vRtrTunnelNexthop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next system en route; Otherwise, 0.0.0.0."
::= { vRtrTunnelEntry 6 }
vRtrTunnelMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vRtrTunnelMetric maintains the metric of the tunnel. This is used
in addition to the preference for this tunnel."
::= { vRtrTunnelEntry 7 }
vRtrTunnelAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this tunnel entry was last
updated or otherwise determined to be correct. No semantics
of `too old' can be implied except through knowledge of
owner of the tunnel."
::= { vRtrTunnelEntry 8 }
--
-- Router-Advertisement Prefix Table
--
vRtrAdvPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrAdvPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the user to configure IPv6 prefixes for
router advertisements on an interface"
::= { tmnxVRtrObjs 23 }
vRtrAdvPrefixEntry OBJECT-TYPE
SYNTAX VRtrAdvPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vRtrAdvPrefixTable."
INDEX { vRtrID, vRtrAdvPrefixIfIndex, vRtrAdvPrefixPrefix, vRtrAdvPrefixLength }
::= { vRtrAdvPrefixTable 1 }
VRtrAdvPrefixEntry ::= SEQUENCE {
vRtrAdvPrefixIfIndex InterfaceIndex,
vRtrAdvPrefixPrefix InetAddress,
vRtrAdvPrefixLength InetAddressPrefixLength,
vRtrAdvPrefixRowStatus RowStatus,
vRtrAdvPrefixOnLinkFlag TruthValue,
vRtrAdvPrefixAutonomousFlag TruthValue,
vRtrAdvPrefixPreferredLifetime Unsigned32,
vRtrAdvPrefixValidLifetime Unsigned32
}
vRtrAdvPrefixIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the interface on
which this prefix is configured. The interface identified
by a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex."
::= { vRtrAdvPrefixEntry 1 }
vRtrAdvPrefixPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ipv6 address prefix. The length of this object
is the standard length (16 bytes ) for IPv6 prefixes."
::= { vRtrAdvPrefixEntry 2 }
vRtrAdvPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength (4..127)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length associated with this prefix.
The value 0 has no special meaning for this object."
::= { vRtrAdvPrefixEntry 3 }
vRtrAdvPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status used for creation and deletion of router
advertisement prefix entries."
::= { vRtrAdvPrefixEntry 4 }
vRtrAdvPrefixOnLinkFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this prefix can be
used for on-link determination and the value 'false(2)'
otherwise."
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and
RFC2462"
DEFVAL { true }
::= { vRtrAdvPrefixEntry 5 }
vRtrAdvPrefixAutonomousFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous address configuration flag. When true(1),
indicates that this prefix can be used for autonomous
address configuration (i.e. can be used to form a local
interface address). If false(2), it is not used to auto-
configure a local interface address."
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and
RFC2462"
DEFVAL { true }
::= { vRtrAdvPrefixEntry 6 }
vRtrAdvPrefixPreferredLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remaining length of time in seconds that this prefix
will continue to be preferred, i.e. time until deprecation.
A value of 4,294,967,295 represents infinity.
The address generated from a deprecated prefix should no
longer be used as a source address in new communications,
but packets received on such an interface are processed as
expected."
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and
RFC2462"
DEFVAL { 604800 }
::= { vRtrAdvPrefixEntry 7 }
vRtrAdvPrefixValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remaining length of time, in seconds, that this prefix
will continue to be valid, i.e. time until invalidation. A
value of 4,294,967,295 represents infinity.
The address generated from an invalidated prefix should not
appear as the destination or source address of a packet."
REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and
RFC2462"
DEFVAL { 2592000 }
::= { vRtrAdvPrefixEntry 8 }
--
-- Virtual router Static Route Table
--
-- vRtrInetStaticRouteTable replaces the vRtrStaticRouteTable
-- that supports configuration of static routes using only the
-- IPv4 address style. The vRtrInetStaticRouteTable is IP version
-- neutral and allows configuration of static routes using IPv4 or
-- IPv6 InetAddress style.
vRtrInetStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant
to this entity's Static Routing table."
::= { tmnxVRtrObjs 24 }
vRtrInetStaticRouteEntry OBJECT-TYPE
SYNTAX VRtrInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination,
through a particular next hop."
INDEX {
vRtrID,
vRtrInetStaticRouteDestType,
vRtrInetStaticRouteDest,
vRtrInetStaticRouteDestPfxLen,
vRtrInetStaticRouteIndex
}
::= { vRtrInetStaticRouteTable 1 }
VRtrInetStaticRouteEntry ::=
SEQUENCE {
vRtrInetStaticRouteDestType InetAddressType,
vRtrInetStaticRouteDest InetAddress,
vRtrInetStaticRouteDestPfxLen InetAddressPrefixLength,
vRtrInetStaticRouteIndex INTEGER,
vRtrInetStaticRouteRowStatus RowStatus,
vRtrInetStaticRouteLastEnabledTime TimeStamp,
vRtrInetStaticRouteStatus INTEGER,
vRtrInetStaticRouteStaticType INTEGER,
vRtrInetStaticRoutePreference Unsigned32,
vRtrInetStaticRouteMetric Unsigned32,
vRtrInetStaticRouteEgressIfIndex InterfaceIndexOrZero,
vRtrInetStaticRouteNextHopType InetAddressType,
vRtrInetStaticRouteNextHop InetAddress,
vRtrInetStaticRouteNextHopIf DisplayString,
vRtrInetStaticRouteAdminState TmnxAdminState,
vRtrInetStaticRouteIgpShortcut BITS,
vRtrInetStaticRouteDisallowIgp TruthValue,
vRtrInetStaticRouteTag Unsigned32,
vRtrInetStaticRouteEnableBfd TruthValue,
vRtrInetStaticRouteCpeAddrType InetAddressType,
vRtrInetStaticRouteCpeAddr InetAddress,
vRtrInetStaticRouteCpeInterval Unsigned32,
vRtrInetStaticRouteCpeDropCnt Unsigned32,
vRtrInetStaticRouteCpeEnableLog TruthValue
}
vRtrInetStaticRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteDestType indicates
the address type of vRtrInetStaticRouteDest address."
::= { vRtrInetStaticRouteEntry 1 }
vRtrInetStaticRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteDest indicates the
destination IP address of this static route."
::= { vRtrInetStaticRouteEntry 2 }
vRtrInetStaticRouteDestPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteDestPfxLen indicates
the prefix length associated with the
vRtrInetStaticRouteDest address."
::= { vRtrInetStaticRouteEntry 3 }
vRtrInetStaticRouteIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteIndex indicates the fifth
index for the vRtrInetStaticRouteTable.
The fifth index to vRtrInetStaticRouteTable identifies a
specific next-hop route to distinguish it from other
routes that share the same destination address."
::= { vRtrInetStaticRouteEntry 4 }
vRtrInetStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrInetStaticRouteRowStatus controls the creation
and deletion of rows in the table."
::= { vRtrInetStaticRouteEntry 5 }
vRtrInetStaticRouteLastEnabledTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteLastEnabledTime
indicates the sysUpTime value when
vRtrInetStaticRouteStatus was last set to active (1) to
allow IP forwarding on this static route entry."
::= { vRtrInetStaticRouteEntry 6 }
vRtrInetStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteStatus indicates
whether or not this route entry is active in the system.
When an interface transitions to the down state, any
associated route entries are marked as 'inactive'
and are usually not displayed in a standard route
table listing. When the interface transitions
to the up state, the agent marks the associated routes as
'active'"
::= { vRtrInetStaticRouteEntry 7 }
vRtrInetStaticRouteStaticType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
nextHop (1),
indirect (2),
blackHole (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteStaticType specifies the
type of static route represented by this row entry."
DEFVAL { unknown }
::= { vRtrInetStaticRouteEntry 8 }
vRtrInetStaticRoutePreference OBJECT-TYPE
SYNTAX Unsigned32 (1..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRoutePreference specifies the priority
of this static route versus the routes from different sources
such as BGP or OSPF etc.
Different protocols should not be configured with the same
preference, if this occurs the tiebreaker is determined per the
default preference value as defined in the table below.
If multiple routes are learned with an identical preference
using the same protocol, the lowest cost is used. If multiple
routes are learned with an identical preference using the same
protocol and the costs (metrics) are equal, then the decision
as to what route to use is determined by the configuration of
the ecmp command.
Default preferences.
Route Type Preference Configurable
---------- ---------- ------------
Direct attached 0 no
Static-route 5 yes
MPLS (post FCS) 7
OSPF Internal routes 10 no
OSPF External 150 yes
BGP 170 yes
"
DEFVAL { 5 }
::= { vRtrInetStaticRouteEntry 9 }
vRtrInetStaticRouteMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteMetric specifies
the metric for the static route.
When ipCidrRouteProto has a value of 'netmgmt' to specify that
this entry is a static route, the value of vRtrInetStaticRouteMetric
associates a metric value with the route. This value is used
when importing this static route into other protocols such as
OSPF. When the metric is configured as zero then the metric
configured in OSPF, default-import-metric, applies. This value
is also used to determine which static route to install in the
forwarding table:
If there are multiple static routes with the same preference
but unequal metric then the lower cost (metric) route will be
installed.
If there are multiple static routes with equal preference and
metrics then ecmp rules apply.
If there are multiple routes with unequal preference then the
lower preference route will be installed.
"
DEFVAL { 1 }
::= { vRtrInetStaticRouteEntry 10 }
vRtrInetStaticRouteEgressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteEgressIfIndex indicates
the outgoing ifIndex for this route as computed by the
static-route module. This variable will have a value of 0
if vRtrInetStaticRouteStatus is 'inactive' or if this static
route is configured as a black hole."
::= { vRtrInetStaticRouteEntry 11 }
vRtrInetStaticRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteNextHopType specifies
the address type of vRtrInetStaticRouteNextHop address."
DEFVAL { unknown }
::= { vRtrInetStaticRouteEntry 12 }
vRtrInetStaticRouteNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16|20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteNextHop specifies
the address of the next hop for the static route.
In case of remote routes, the address of the
next system en route. This member is
complemented by vRtrInetStaticRouteNextHopIf.
At most only one of the two objects:
vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf
and can be non-null. If vRtrInetStaticRouteNextHopType
is 'unknown' and vRtrInetStaticRouteNextHopIf is a
null string then this static route is configured as
a black hole."
::= { vRtrInetStaticRouteEntry 13 }
vRtrInetStaticRouteNextHopIf OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteNextHopIf specifies
the interface of the next hop for the static route.
The name of the Interface which will be the nexthop for
this route. This member is complemented by
vRtrInetStaticRouteNextHop.
At most only one of the two objects:
vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf
and can be non-null. If vRtrInetStaticRouteNextHopType
is 'unknown' and vRtrInetStaticRouteNextHopIf is a
null string then this static route is configured as
a black hole."
::= { vRtrInetStaticRouteEntry 14 }
vRtrInetStaticRouteAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteAdminState specifies
the desired administrative state for this
virtual router static route"
DEFVAL { inService }
::= { vRtrInetStaticRouteEntry 15 }
vRtrInetStaticRouteIgpShortcut OBJECT-TYPE
SYNTAX BITS {
te(0),
ldp(1),
ip(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteIgpShortcut specifies the
Layer 2 tunneling mechanism used for IGP shortcuts.
The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect
static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The
bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling
mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts
associated with that tunneling mechanism will be used to resolve
next-hop for the static-route. If no bits are set, IGP shortcuts
will not be used to resolve next-hop for the static routes.
The tunneling mechanisms represented by each bit are:
te(0) - RSVP Traffic Engineering
ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC)
ip(2) - IP (IP-in-IP or GRE)
Evaluation of tunnel preference is based on the following order, in
descending priority:
1. Traffic Engineered Shortcut (RSVP-TE)
2. LDP /32 Route FEC Shortcut
3. IP Shortcut (IP-in-IP or GRE)
4. Actual IGP Next-Hop."
DEFVAL { { } }
::= { vRtrInetStaticRouteEntry 16 }
vRtrInetStaticRouteDisallowIgp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteDisallowIgp specifies if
IGP shortcuts are to be used or not.
The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect
static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If
the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if
none of the defined tunneling mechanisms (RSVP-TE, LDP or IP)
qualify as a next-hop, the normal IGP next-hop to the indirect
next-hop address will not be used. If the value is set to 'false',
IGP next-hop to the indirect next-hop address can be used as the
next-hop of the last resort."
DEFVAL { false }
::= { vRtrInetStaticRouteEntry 17 }
vRtrInetStaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag
that is used to add to the static route. This tag could then be used
in route policies to control distribution of the route into other
protocols. A value of 0 indicates that the tag has not been set."
DEFVAL { 0 }
::= { vRtrInetStaticRouteEntry 18 }
vRtrInetStaticRouteEnableBfd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteEnableBfd specifies whether or not
Bi-directional Forwarding Detection is enabled on this static route.
When the value is 'true', this static-route can establish BFD sessions
and use BFD as a signalling mechanism.
When it is 'false', it cannot use BFD."
DEFVAL { false }
::= { vRtrInetStaticRouteEntry 19 }
vRtrInetStaticRouteCpeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteCpeAddrType specifies the address
type of vRtrInetStaticRouteCpeAddr address.
When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown',
statitistics for the Customer-Provided Equipment (CPE) host checks
for this static route entry will be found in the sparsely dependent
table extension, vRtrInetStatRteCpeChkStatsTable."
DEFVAL { unknown }
::= { vRtrInetStaticRouteEntry 20 }
vRtrInetStaticRouteCpeAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteCpeAddr specifies the IP address
of the target CPE device. When this object is configured, ICMP pings
will be sent to this target IP address to determine CPE connectivity
and whether this static route should be active.
When the value of vRtrInetStaticRouteCpeAddr is non-empty,
statitistics for the CPE host checks for this static route entry
will be found in the sparsely dependent table extension,
vRtrInetStatRteCpeChkStatsTable."
DEFVAL { ''H }
::= { vRtrInetStaticRouteEntry 21 }
vRtrInetStaticRouteCpeInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteCpeInterval specifies the interval,
in seconds, between ICMP pings to the target CPE IP address,
vRtrInetStaticRouteCpeAddr."
DEFVAL { 1 }
::= { vRtrInetStaticRouteEntry 22 }
vRtrInetStaticRouteCpeDropCnt OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteCpeDropCnt specifies the number of
consecutive ping-replies that must be missed before concluding the
CPE is down. If the CPE is determined to be down, the associated
static route will be deactivated."
DEFVAL { 3 }
::= { vRtrInetStaticRouteEntry 23 }
vRtrInetStaticRouteCpeEnableLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable
the logging of transitions between active and in-active based on the CPE
connectivity check.
A value of 'true (1)' indicates that logging should be enabled."
DEFVAL { false }
::= { vRtrInetStaticRouteEntry 24 }
--
-- Inet Static Route Index Table
--
-- A read-only table which suggests the available
-- index - vRtrInetStaticRouteIndex
-- for a given set of vRtrID, vRtrInetStaticRouteDestType,
-- vRtrInetStaticRouteDest & vRtrInetStaticRouteDestPfxLen.
-- vRtrInetStaticRouteIndex will be the fifth index while
-- configuring an entry into the vRtrInetStaticRouteTable.
-- vRtrInetStaticRouteIndexTable table replaces vRtrStaticRouteIndexTable
vRtrInetStaticRouteIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrInetStaticRouteIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's Static Route Index Table."
::= { tmnxVRtrObjs 25 }
vRtrInetStaticRouteIndexEntry OBJECT-TYPE
SYNTAX VRtrInetStaticRouteIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The available index for the vRtrInetStaticRouteTable for every
destination per virtual router."
INDEX {
vRtrID,
vRtrInetStaticRouteDestType,
vRtrInetStaticRouteDest,
vRtrInetStaticRouteDestPfxLen
}
::= { vRtrInetStaticRouteIndexTable 1 }
VRtrInetStaticRouteIndexEntry ::=
SEQUENCE {
vRtrInetStaticRouteAvailIndex TestAndIncr
}
vRtrInetStaticRouteAvailIndex OBJECT-TYPE
SYNTAX TestAndIncr (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStaticRouteAvailIndex indicates
the available fifth index for the vRtrInetStaticRouteTable.
The fifth index to vRtrInetStaticRouteTable identifies a
specific next-hop route to distinguish it from other
routes that share the same destination address."
::= { vRtrInetStaticRouteIndexEntry 1 }
--
-- VRtr instance aggregation objects
--
vRtrInetInstAggrTblLastChged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last change to the vRtrInetInstAggrTable
either from adding a row or removing a row."
::= { tmnxVRtrObjs 26 }
-- vRtrInetInstAggrTable replaces the vRtrInstanceAggregationTable
-- that supports configuration of aggregate routes using only the
-- IPv4 address style. The vRtrInetInstAggrTable is IP version
-- neutral and allows configuration of aggregate routes using IPv4 or
-- IPv6 InetAddress style.
vRtrInetInstAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrInetInstAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrInetInstAggrTable is the list of configured
virtual router aggregations and their operational
status information.
vRtrInetInstAggrTable specifies the route aggregates
that should be generated into the virtual router if at
least one contributing route (more specific) is learned.
A route could match multiple aggregate statements.
For instance, with the following entries:
aggregate 10.0.0.0/8
aggregate 10.1.0.0/16
If the route 10.1.1.0/24 is learned, both aggregates would be
generated."
::= { tmnxVRtrObjs 27 }
vRtrInetInstAggrEntry OBJECT-TYPE
SYNTAX VRtrInetInstAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vRtrInetInstAggrEntry indicates an entry (conceptual row)
in the vRtrInetInstAggrTable.
Entries are created and destroyed by user."
INDEX { vRtrID,
vRtrInetAggrIpPrefixType,
vRtrInetAggrIpPrefix,
vRtrInetAggrIpPrefixLen }
::= { vRtrInetInstAggrTable 1 }
VRtrInetInstAggrEntry ::= SEQUENCE {
vRtrInetAggrIpPrefixType InetAddressType,
vRtrInetAggrIpPrefix InetAddress,
vRtrInetAggrIpPrefixLen InetAddressPrefixLength,
vRtrInetAggrRowStatus RowStatus,
vRtrInetAggrLastChanged TimeStamp,
vRtrInetAggrSummaryOnly TruthValue,
vRtrInetAggrASSet TruthValue,
vRtrInetAggrAggregatorAS TmnxBgpAutonomousSystem,
vRtrInetAggrAggregatorIPAddr IpAddress,
vRtrInetAggrOperState TmnxOperState
}
vRtrInetAggrIpPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetAggrIpPrefixType indicates
the IP address type of vRtrInetAggrIpPrefix."
::= { vRtrInetInstAggrEntry 1 }
vRtrInetAggrIpPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetAggrIpPrefixType indicates
the IP address prefix to match for the aggregation."
::= { vRtrInetInstAggrEntry 2 }
vRtrInetAggrIpPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetAggrIpPrefixLen indicates
the prefix length for vRtrInetAggrIpPrefix, to match
for the aggregation."
::= { vRtrInetInstAggrEntry 3 }
vRtrInetAggrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vRtrInetAggrRowStatus controls the creation
and deletion of rows in the table."
::= { vRtrInetInstAggrEntry 4 }
vRtrInetAggrLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetAggrLastChanged specifies the
time stamp of the last change to this row of
vRtrInetInstAggrTable ."
::= { vRtrInetInstAggrEntry 5 }
vRtrInetAggrSummaryOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetAggrSummaryOnly specifies if
specific routes that make up aggregates are advertised or
not.
When vRtrInetAggrSummaryOnly has value of 'true(1)', only the
aggregate is advertised, the more specfic routes that make
up the aggregate are not.
When vRtrInetAggrSummaryOnly has value of 'false(2)', both the
aggregate and more specific components are advertised."
DEFVAL { false }
::= { vRtrInetInstAggrEntry 6 }
vRtrInetAggrASSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetAggrASSet specifies whether the
aggregate route has AS-SET.
When vRtrInetAggrASSet has value of 'true(1)', the AS-Path
of the resulting aggregate will contain an AS-SET
containing all AS numbers from the contributing routes.
When vRtrInetAggrASSet has value of 'false(2)', the AS-Path
will contain no AS-SET and will be originated by the ESR."
DEFVAL { false }
::= { vRtrInetInstAggrEntry 7 }
vRtrInetAggrAggregatorAS OBJECT-TYPE
SYNTAX TmnxBgpAutonomousSystem
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetAggrAggregatorAS specifies the
aggregator's ASN.
When vRtrInetAggrAggregatorAS is set to non zero, and
vRtrInetAggrAggregatorIPAddr is set to non-zero,
the supplied ASN and IP address will be used for the
aggregator path attributes.
When vRtrInetAggrAggregatorAS is not set, the aggregate
routes ASN & Router-ID will be used for the aggregator
path attributes."
DEFVAL { 0 }
::= { vRtrInetInstAggrEntry 8 }
vRtrInetAggrAggregatorIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetAggrAggregatorIPAddr specifies the
aggregator's IP address.
When vRtrInetAggrAggregatorAS is set to non zero, and
vRtrInetAggrAggregatorIPAddr is set to non-zero,
the supplied ASN and IP address will be used for the
aggregator path attributes.
When vRtrInetAggrAggregatorIPAddr is not set, the aggregate
routes ASN & Router-ID will be used for the aggregator
path attributes."
DEFVAL { '00000000'H } -- 0.0.0.0 means not-set
::= { vRtrInetInstAggrEntry 9 }
vRtrInetAggrOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetAggrOperState specifies the current
operational status of the aggregation entry."
::= { vRtrInetInstAggrEntry 10 }
--
-- Virtual Router Service Interface IP Address Range table
-- IP-version independent
--
vRtrInetSvcIpRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrInetSvcIpRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrInetSvcIpRangeTable has an entry for each IP address
range configured for a virtual interface in a virtual router
in the system. An interface on the virtual router may have
more than one Service IP address range assigned to it."
::= { tmnxVRtrObjs 28 }
vRtrInetSvcIpRangeEntry OBJECT-TYPE
SYNTAX VRtrInetSvcIpRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an IP address range assigned a
virtual router service interface. Setting RowStatus to
'active' requires values for all column variables to have
been assigned."
INDEX { vRtrID,
vRtrInetSvcIpRangeAddrType,
vRtrInetSvcIpRangeAddr,
vRtrInetSvcIpRangePfxLen
}
::= { vRtrInetSvcIpRangeTable 1 }
VRtrInetSvcIpRangeEntry ::=
SEQUENCE {
vRtrInetSvcIpRangeAddrType InetAddressType,
vRtrInetSvcIpRangeAddr InetAddress,
vRtrInetSvcIpRangePfxLen InetAddressPrefixLength,
vRtrInetSvcIpRangeRowStatus RowStatus,
vRtrInetSvcIpRangeExclusive TruthValue
}
vRtrInetSvcIpRangeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetSvcIpRangeAddrType indicates the IP
address type of vRtrInetSvcIpRangeAddr."
::= { vRtrInetSvcIpRangeEntry 1 }
vRtrInetSvcIpRangeAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetSvcIpRangeAddr indicates the IP address
service range assigned to a router's service interface. The
address type of vRtrInetSvcIpRangeAddr is indicated by
vRtrInetSvcIpRangeAddrType."
::= { vRtrInetSvcIpRangeEntry 2 }
vRtrInetSvcIpRangePfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of vRtrInetSvcIpRangePfxLen specifies the prefix length
to be used with vRtrInetSvcIpRangeAddr for determining the IP
address range."
::= { vRtrInetSvcIpRangeEntry 3 }
vRtrInetSvcIpRangeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetSvcIpRangeRowStatus is used for creation and
deletion of IP service prefix ranges."
::= { vRtrInetSvcIpRangeEntry 4 }
vRtrInetSvcIpRangeExclusive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrInetSvcIpRangeExclusive specifies how the set
of addresses specified by this entry are interpreted. When the
value is 'true', they are reserved for services only and cannot be
assigned to network ports. When the value is 'false',
it could be used for services as well as network ports."
DEFVAL { false }
::= { vRtrInetSvcIpRangeEntry 5 }
--
-- Augmentation of the IP-MIB ipNetToPhysicalTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
-- the base table, ipNetToPhysicalTable, and the augmenting table,
-- vRtrIpNetToPhysicalTable. This in effect extends the ipNetToPhysicalTable
-- with additional columns. Creation (or deletion) of a row in the
-- ipNetToPhysicalTable results in the same fate for the row in the
-- vRtrIpNetToPhysicalTable.
--
-- ALCATEL CHANG
--vRtrIpNetToPhysicalTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF VRtrIpNetToPhysicalEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The vRtrIpNetToPhysicalTable provides an extension of the
-- ipNetToPhysicalTable in the IP-MIB."
-- ::= { tmnxVRtrObjs 29 }
--
--vRtrIpNetToPhysicalEntry OBJECT-TYPE
-- SYNTAX VRtrIpNetToPhysicalEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Each row entry in the vRtrIpNetToPhysicalTable represents additional
-- columns for attributes specific to the Alcatel 7x50 SR series
-- implementation for the vRtrIpNetToPhysicalTable."
-- AUGMENTS { ipNetToPhysicalEntry }
-- ::= { vRtrIpNetToPhysicalTable 1 }
--
--VRtrIpNetToPhysicalEntry ::=
-- SEQUENCE {
-- vRtrIpNetToPhysicalTimer Unsigned32,
-- vRtrIpNetToPhysicalOperState TmnxOperState,
-- vRtrIpNetToPhysicalIsRouter TruthValue,
-- vRtrIpNetToPhysicalMTU Unsigned32,
-- vRtrIpNetToPhysicalPort TmnxPortID,
-- vRtrIpNetToPhysicalEncap TmnxEncapVal
-- }
--
--vRtrIpNetToPhysicalTimer OBJECT-TYPE
-- SYNTAX Unsigned32 (0..65535)
-- UNITS "seconds"
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrIpNetToPhysicalTimer indicates how much longer an ARP
-- entry associated with an vRtrIpNetToPhysicalTable entry remains in the
-- ARP cache. It is initially set to vRtrIfArpTimeout. When
-- vRtrIpNetToPhysicalTimer has a value of zero, '0', the entry is cleared
-- from the cache."
-- ::= { vRtrIpNetToPhysicalEntry 1 }
--
--vRtrIpNetToPhysicalOperState OBJECT-TYPE
-- SYNTAX TmnxOperState
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrIpNetToPhysicalOperState indicates if the ARP entry is
-- being used actively in the ARP Table. When ipNetToPhysicalType has a
-- value 'dynamic', vRtrIpNetToPhysicalOperState will never have a value of
-- 'outOfService'."
-- ::= { vRtrIpNetToPhysicalEntry 2 }
--
--vRtrIpNetToPhysicalIsRouter OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrIpNetToPhysicalIsRouter indicates whether this
-- ipNetToPhysicalEntry is a router."
-- ::= { vRtrIpNetToPhysicalEntry 3 }
--
--vRtrIpNetToPhysicalMTU OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrIpNetToPhysicalMTU indicates the MTU of the link
-- attached to this ipNetToPhysicalEntry."
-- ::= { vRtrIpNetToPhysicalEntry 4 }
--
--vRtrIpNetToPhysicalPort OBJECT-TYPE
-- SYNTAX TmnxPortID
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrIpNetToPhysicalPort indicates the ID of the port
-- on which this entry was learned."
-- ::= { vRtrIpNetToPhysicalEntry 5 }
--
--vRtrIpNetToPhysicalEncap OBJECT-TYPE
-- SYNTAX TmnxEncapVal
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrIpNetToPhysicalEncap indicates the encap value
-- of the SAP this entry was learned on. If this entry was learned
-- on a network port or null-encap SAP, the value of this object
-- will be zero."
-- ::= { vRtrIpNetToPhysicalEntry 6 }
-- ALCATEL CHANG
-- ALCATEL CHANG
-- Augmentation of the IP-FORWARD-MIB inetCidrRouteTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship between
-- the base table, inetCidrRouteTable, and the augmenting table,
-- vRtrInetCidrRouteTable. This in effect extends the inetCidrRouteTable with
-- additional columns. Creation (or deletion) of a row in the
-- inetCidrRouteTable results in the same fate for the row in the
-- vRtrInetCidrRouteTable.
--
--vRtrInetCidrRouteTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF VRtrInetCidrRouteEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The vRtrInetCidrRouteTable provides an extension of the
-- inetCidrRouteTable in the IP-FORWARD-MIB."
-- ::= { tmnxVRtrObjs 30 }
--
--vRtrInetCidrRouteEntry OBJECT-TYPE
-- SYNTAX VRtrInetCidrRouteEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Each row entry in the vRtrInetCidrRouteTable represents additional
-- columns for attributes specific to the Alcatel 7x50 SR series
-- implementation for the IP route table."
-- AUGMENTS { inetCidrRouteEntry }
-- ::= { vRtrInetCidrRouteTable 1 }
--
--VRtrInetCidrRouteEntry ::=
-- SEQUENCE {
-- vRtrInetCidrRouteLastEnabledTime TimeStamp,
-- vRtrInetCidrRoutePreference Unsigned32,
-- vRtrInetCidrRouteMetric Unsigned32,
-- vRtrInetCidrRouteIfVRtrId TmnxVRtrIDOrZero
-- }
--
--vRtrInetCidrRouteLastEnabledTime OBJECT-TYPE
-- SYNTAX TimeStamp
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The vRtrInetCidrRouteLastEnabledTime variable indicates the sysUpTime
-- value when ipCidrRouteStatus was last set to active (1) to
-- allow IP forwarding on this route entry."
-- ::= { vRtrInetCidrRouteEntry 1 }
--
--
--vRtrInetCidrRoutePreference OBJECT-TYPE
-- SYNTAX Unsigned32 (0..255)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrInetCidrRoutePreference specifies the priority
-- of this static route versus the routes from different sources
-- such as BGP or OSPF etc, when ipCidrRouteProto has a value of
-- 'netmgmt' to indicate that this entry is a static route.
--
-- Different protocols should not be configured with the same
-- preference, if this occurs the tiebreaker is determined per the
-- default preference value as defined in the table below.
--
-- If multiple routes are learned with an identical preference
-- using the same protocol, the lowest cost is used. If multiple
-- routes are learned with an identical preference using the same
-- protocol and the costs (metrics) are equal, then the decision
-- as to what route to use is determined by the configuration of
-- the ecmp command.
--
-- Default preferences:
--
-- Route Type Preference Configurable
-- ---------- ---------- ------------
-- Direct attached 0 no
-- Static-route 5 yes
-- MPLS (post FCS) 7
-- OSPF Internal routes 10 no
-- OSPF External 150 yes
-- BGP 170 yes
-- "
-- DEFVAL { 5 }
-- ::= { vRtrInetCidrRouteEntry 2 }
--
--vRtrInetCidrRouteMetric OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrInetCidrRouteMetric indicates the primary routing
-- metric for this route. The semantics of this metric are determined
-- by the routing-protocol specified in the route's ipCidrRouteProto
-- value."
-- ::= { vRtrInetCidrRouteEntry 3 }
--
--vRtrInetCidrRouteIfVRtrId OBJECT-TYPE
-- SYNTAX TmnxVRtrIDOrZero
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of vRtrInetCidrRouteIfVRtrId indicates the virtual router
-- instance of the egress interface defined by inetCidrRouteIfIndex.
-- This object is valid only for subscriber management routes. For all
-- other route types, this object will have a value of zero."
-- ::= { vRtrInetCidrRouteEntry 4 }
--
-- Alcatel 7x50 SR series Virtual Router Global InterfaceIndex to
-- vRtrID and vRtrIfIndex Mapping Table
-- ALCATEL CHANG
vRtrIfGlobalIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfGlobalIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a read-only table, each row of which represents a one to
one equivalence between a unique system wide router interface index
(vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID)
and index in the vRtrIfTable (vRtrIfIndex)."
::= { tmnxVRtrObjs 37 }
vRtrIfGlobalIndexEntry OBJECT-TYPE
SYNTAX VRtrIfGlobalIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry in the vRtrIfGlobalIndexTable corresponds to a row
in the vRtrIfTable. When an entry is created or deleted in the
vRtrIfTable, a corresponding entry is created or deleted in this
table."
INDEX { vRtrIfGlobalIndex }
::= { vRtrIfGlobalIndexTable 1 }
VRtrIfGlobalIndexEntry ::=
SEQUENCE {
vRtrIfGlobalIndexvRtrID TmnxVRtrID,
vRtrIfGlobalIndexvRtrIfIndex InterfaceIndex
}
vRtrIfGlobalIndexvRtrID OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that
maps to the vRtrIfGlobalIndex. The combination of a vRtrID and
a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
This value represents the specific instance of virtual router
which the vRtrIfGlobalIndex belongs to."
::= { vRtrIfGlobalIndexEntry 1 }
vRtrIfGlobalIndexvRtrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of
vRtrIfIndex for a row in the vRtrIfTable. This row corresponds
to the virtual router interface that maps to the
vRtrIfGlobalIndex. The combination of a vRtrID and
a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex."
::= { vRtrIfGlobalIndexEntry 2 }
--
-- Alcatel 7x50 SR series Virtual Router Interface Proxy Neigbor
-- Discovery Table
--
-- Augmentation of the vRtrIfTable.
-- Use of AUGMENTS clause implies a one-to-one dependent relationship
-- between the base table, vRtrIfTable, and the augmenting table,
-- vRtrIfProxyNDTable. This in effect extends the vRtrIfTable with
-- additional columns. Creation (or deletion) of a row in the
-- vRtrIfTable results in the same fate for the row in the
-- vRtrIfProxyNDTable.
--
vRtrIfProxyNDTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfProxyNDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfProxyNDTable provides an extension to the vRtrIfTable.
It has an entry for each virtual router interface configured in
the system."
::= { tmnxVRtrObjs 38 }
vRtrIfProxyNDEntry OBJECT-TYPE
SYNTAX VRtrIfProxyNDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents information related to Proxy Neighbor
Discovery for a virtual router interface in the system.
Entries cannot be created and deleted via SNMP SET operations."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfProxyNDTable 1 }
VRtrIfProxyNDEntry ::=
SEQUENCE {
vRtrIfProxyNDLocal TruthValue,
vRtrIfProxyNDPolicy1 TPolicyStatementNameOrEmpty,
vRtrIfProxyNDPolicy2 TPolicyStatementNameOrEmpty,
vRtrIfProxyNDPolicy3 TPolicyStatementNameOrEmpty,
vRtrIfProxyNDPolicy4 TPolicyStatementNameOrEmpty,
vRtrIfProxyNDPolicy5 TPolicyStatementNameOrEmpty
}
vRtrIfProxyNDLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of vRtrIfProxyNDLocal is set to 'true', local proxy
Neighbor Discovery is enabled, that is, the interface will reply to
Neighbor Solicitation requests when both the hosts are on the same
subnet. In this case ICMP redirects will be disabled. If the value
of vRtrIfProxyNDLocal is set to 'false', the interface will not
reply to Neighbor Solicitation requests if both the hosts are on the
same subnet."
DEFVAL { false }
::= { vRtrIfProxyNDEntry 1 }
vRtrIfProxyNDPolicy1 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND
policy for this interface. This policy determines networks and
sources for which proxy ND will be attempted, when local proxy
ND is enabled."
DEFVAL { ''H }
::= { vRtrIfProxyNDEntry 2 }
vRtrIfProxyNDPolicy2 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND
policy for this interface. This policy determines networks and
sources for which proxy ND will be attempted, when local proxy
ND is enabled."
DEFVAL { ''H }
::= { vRtrIfProxyNDEntry 3 }
vRtrIfProxyNDPolicy3 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND
policy for this interface. This policy determines networks and
sources for which proxy ND will be attempted, when local proxy
ND is enabled."
DEFVAL { ''H }
::= { vRtrIfProxyNDEntry 4 }
vRtrIfProxyNDPolicy4 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND
policy for this interface. This policy determines networks and
sources for which proxy ND will be attempted, when local proxy
ND is enabled."
DEFVAL { ''H }
::= { vRtrIfProxyNDEntry 5 }
vRtrIfProxyNDPolicy5 OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND
policy for this interface. This policy determines networks and
sources for which proxy ND will be attempted, when local proxy
ND is enabled."
DEFVAL { ''H }
::= { vRtrIfProxyNDEntry 6 }
--
-- Alcatel 7x50 SR series
-- Virtual Router DHCP6 prefix Delegation table
--
vRtrIfDHCP6PfxDelegationLstChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates
the Timestamp of the last change to any row the
vRtrIfDHCP6PfxDelegationTable"
::= { tmnxVRtrObjs 39 }
vRtrIfDHCP6PfxDelegationTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfDHCP6PfxDelegationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table vRtrIfDHCP6PfxDelegationTable is used to configure
the feature of automated delegation of IPv6 prefixes using DHCP6.
This feature is intended for delegating a long-lived prefix from
a delegating router to a requesting router, where the delegating
router does not require knowledge about the topology of the
links in the network to which the prefixes will be assigned."
::= { tmnxVRtrObjs 40 }
vRtrIfDHCP6PfxDelegationEntry OBJECT-TYPE
SYNTAX VRtrIfDHCP6PfxDelegationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a delegated IPv6 prefix.
Entries can be created and deleted via SNMP SET operations.
Creation requires a SET request containing the vRtrRowStatus."
INDEX { vRtrID,
vRtrIfIndex,
vRtrIfDHCP6PfxdPrefix,
vRtrIfDHCP6PfxdPrefixLen }
::= { vRtrIfDHCP6PfxDelegationTable 1 }
VRtrIfDHCP6PfxDelegationEntry ::=
SEQUENCE {
vRtrIfDHCP6PfxdPrefix InetAddressIPv6,
vRtrIfDHCP6PfxdPrefixLen InetAddressPrefixLength,
vRtrIfDHCP6PfxdRowStatus RowStatus,
vRtrIfDHCP6PfxdLastChanged TimeStamp,
vRtrIfDHCP6PfxdDUID OCTET STRING,
vRtrIfDHCP6PfxdIAID Unsigned32,
vRtrIfDHCP6PfxdPrefLifetime Unsigned32,
vRtrIfDHCP6PfxdValidLifetime Unsigned32
}
vRtrIfDHCP6PfxdPrefix OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdPrefix specifies,
together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6
prefix that will be delegated."
::= { vRtrIfDHCP6PfxDelegationEntry 1 }
vRtrIfDHCP6PfxdPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdPrefixLen specifies,
together with the object vRtrIfDHCP6PfxdPrefix the ipv6
prefix that will be delegated by this system."
::= { vRtrIfDHCP6PfxDelegationEntry 2 }
vRtrIfDHCP6PfxdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdRowStatus specifies the
Row status of this table row. This object is used to create or
delete rows in this table.
The only allowed values for this object are: active(1),
createAndGo(4), and destroy(6)."
::= { vRtrIfDHCP6PfxDelegationEntry 3 }
vRtrIfDHCP6PfxdLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime
when any object of the row is last changed."
::= { vRtrIfDHCP6PfxDelegationEntry 4 }
vRtrIfDHCP6PfxdDUID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdDUID specifies
the ID of the requesting router. If set to a non zero value
the prefix defined in this row will only be delegated to this
router. If set to zero, the prefix will be delegated to any
requesting router."
DEFVAL { ''H } -- the empty string
::= { vRtrIfDHCP6PfxDelegationEntry 6 }
vRtrIfDHCP6PfxdIAID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdIAID specifies
the IAID from the requesting router
that needs to match in order to delegate the prefix defined
in this row.If set to 0 no match on the received IAID is done."
DEFVAL { 0 }
::= { vRtrIfDHCP6PfxDelegationEntry 7 }
vRtrIfDHCP6PfxdPrefLifetime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies
the time in seconds that this prefix remains preferred.
The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then
the value of vRtrIfDHCP6PfxdValidLifetime.
The value 4294967295 is considered equal to infinity."
DEFVAL { 604800 } -- 7 days
::= { vRtrIfDHCP6PfxDelegationEntry 8 }
vRtrIfDHCP6PfxdValidLifetime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object vRtrIfDHCP6PfxdValidLifetime specifies
the time in seconds that the prefix is valid.
The value 4294967295 is considered equal to infinity."
DEFVAL { 2592000 } -- 30 days
::= { vRtrIfDHCP6PfxDelegationEntry 9 }
--
-- Alcatel 7x50 SR series Virtual Router DHCP6 Statistics Table
--
vRtrDHCP6DropStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrDHCP6DropStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrDHCP6DropStatTable has an entry for each virtual router
configured in the system."
::= { tmnxVRtrObjs 41 }
vRtrDHCP6DropStatEntry OBJECT-TYPE
SYNTAX VRtrDHCP6DropStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of DHCP6 drop reason
statistics for a virtual router in the system.
Entries cannot be created and deleted via SNMP SET operations."
INDEX { vRtrID,
vRtrDHCP6DropStatReason }
::= { vRtrDHCP6DropStatTable 1 }
VRtrDHCP6DropStatEntry ::=
SEQUENCE {
vRtrDHCP6DropStatReason INTEGER,
vRtrDHCP6DropStatLastCleared TimeStamp,
vRtrDHCP6DropStatPktsDropped Gauge32
}
vRtrDHCP6DropStatReason OBJECT-TYPE
SYNTAX INTEGER {
none ( 0 ),
srcOperDown ( 1 ),
dstOperDown ( 2 ),
rlyReplyOnClientItf ( 3 ),
hopCount ( 4 ),
badRelayedMsg ( 5 ),
clientItfNotFound ( 6 ),
noMemory ( 7 ),
noGlobalPfx ( 8 ),
noSrcIp ( 9 ),
noRteToServer ( 10 ),
subMgmtUpdFail ( 11 ),
relayForw ( 12 ),
msgTooSmall ( 13 ),
msgNotForServer ( 14 ),
noServerId ( 15 ),
noClientId ( 16 ),
serverIdInClientMsg ( 17 ),
wrongServerId ( 18 ),
illegalUnicast ( 19 ),
illegalSrcIp ( 20 ),
pdMsgNotSupported ( 21 ),
nbrAddrsExceeded ( 22 ),
clientMacNotResolved ( 23 ),
illegalAssignedAddr ( 24 ),
msgEncodingError ( 25 )
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object vRtrDHCP6DropStatReason indicates the drop reason for
which the object vRtrDHCP6DropStatPktsDropped contains the counter.
none
srcOperDown Dhcp6 oper state is not Up on src itf
dstOperDown Dhcp6 oper state is not Up on dst itf
rlyReplyOnClientItf Relay Reply Msg on Client Itf
hopCount Hop Count Limit reached
badRelayedMsg Missing Relay Msg option, or illegal msg type
clientItfNotFound Unable to determine destinatinon client Itf
noMemory Out of Memory
noGlobalPfx No global Pfx on Client Itf
noSrcIp Unable to determine src Ip Addr
noRteToServer No route to server
subMgmtUpdFail Subscr. Mgmt. Update failed
relayForw Received Relay Forw Message
msgTooSmall Packet too small to contain valid dhcp6 msg
msgNotForServer Server cannot respond to this message
noServerId No Server Id option in msg from server
noClientId No Client Id option in msg from client
serverIdInClientMsg Server Id option in client msg
wrongServerId Server DUID in client msg does not match ours
illegalUnicast Client sent message to unicast while not
allowed
illegalSrcIp Client sent message with illegal src Ip
pdMsgNotSupported Client message type not supported in
pfx delegation
nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed
maximum in msg
clientMacNotResolved Unable to resolve client's mac address
illegalAssignedAddr The client was assigned an illegal address
msgEncodingError Illegal pfx length in a IA_PREFIX option
"
::= { vRtrDHCP6DropStatEntry 1 }
vRtrDHCP6DropStatLastCleared OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime
when the counters of this row were last reset. A value of zero for
this object indicates that the counters have not been reset since the
system has last been initialized."
::= { vRtrDHCP6DropStatEntry 2 }
vRtrDHCP6DropStatPktsDropped OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrDHCP6DropStatPktsDropped indicates the number of
DHCP6 packets were dropped for the reason described in
vRtrDHCP6DropStatReason."
::= { vRtrDHCP6DropStatEntry 3 }
--
-- Alcatel 7x50 SR series Virtual Router DHCP6 msg type Statistics Table
--
vRtrDHCP6MsgStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrDHCP6MsgStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrDHCP6MsgStatTable has an entry for each virtual router
configured in the system."
::= { tmnxVRtrObjs 42 }
vRtrDHCP6MsgStatEntry OBJECT-TYPE
SYNTAX VRtrDHCP6MsgStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of counters for each DHCP6
message type for a virtual router in the system.
Entries cannot be created and deleted via SNMP SET operations."
INDEX { vRtrID,
vRtrDHCP6MsgStatsMsgType }
::= { vRtrDHCP6MsgStatTable 1 }
VRtrDHCP6MsgStatEntry ::=
SEQUENCE {
vRtrDHCP6MsgStatsMsgType TmnxDHCP6MsgType,
vRtrDHCP6MsgStatsLstClrd TimeStamp,
vRtrDHCP6MsgStatsRcvd Gauge32,
vRtrDHCP6MsgStatsSent Gauge32,
vRtrDHCP6MsgStatsDropped Gauge32
}
vRtrDHCP6MsgStatsMsgType OBJECT-TYPE
SYNTAX TmnxDHCP6MsgType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type
for which statistics are kept on a per vrtr basis."
::= { vRtrDHCP6MsgStatEntry 1 }
vRtrDHCP6MsgStatsLstClrd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime
when the counters of this row were last reset. A value of zero for
this object indicates that the counters have not been reset since the
system has last been initialized."
::= { vRtrDHCP6MsgStatEntry 2 }
vRtrDHCP6MsgStatsRcvd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrDHCP6MsgStatsRcvd indicates the number of
DHCP6 packets were received of the DHCP6 message type indicated by
vRtrDHCP6MsgStatsMsgType."
::= { vRtrDHCP6MsgStatEntry 3 }
vRtrDHCP6MsgStatsSent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrDHCP6MsgStatsSent indicates the number of
DHCP6 packets were sent of the DHCP6 message type indicated by
vRtrDHCP6MsgStatsMsgType."
::= { vRtrDHCP6MsgStatEntry 4 }
vRtrDHCP6MsgStatsDropped OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrDHCP6MsgStatsDropped indicates the number of
DHCP6 packets were dropped of the DHCP6 message type indicated by
vRtrDHCP6MsgStatsMsgType."
::= { vRtrDHCP6MsgStatEntry 5 }
--
-- Virtual Router Interface IPCP table
-- Use of AUGMENTS clause implies a one-to-one dependent relationship
-- between the base table, vRtrIfTable, and the augmenting table,
-- vRtrIfIpcpTable. This in effect extends the vRtrIfTable with
-- additional columns. Creation (or deletion) of a row in the
-- vRtrIfTable results in the same fate for the row in the
-- vRtrIfIpcpTable.
--
vRtrIfIpcpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrIfIpcpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrIfIpcpTable table contains the configuration for
IPCP interface configuration on the vRtrIfEntry
with the same indices."
::= { tmnxVRtrObjs 43 }
vRtrIfIpcpEntry OBJECT-TYPE
SYNTAX VRtrIfIpcpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the IPCP configuration for an
interface. Entries are created and deleted when entries
in the vRtrIfTable are created and deleted."
AUGMENTS { vRtrIfEntry }
::= { vRtrIfIpcpTable 1 }
VRtrIfIpcpEntry ::=
SEQUENCE {
vRtrIfIpcpPeerAddrType InetAddressType,
vRtrIfIpcpPeerAddr InetAddress,
vRtrIfIpcpPriDnsAddrType InetAddressType,
vRtrIfIpcpPriDnsAddr InetAddress,
vRtrIfIpcpSecDnsAddrType InetAddressType,
vRtrIfIpcpSecDnsAddr InetAddress
}
vRtrIfIpcpPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIpcpPeerAddrType specifies the type of
vRtrIfIpcpPeerAddr, the remote peer's IP address.
vRtrIfIpcpPeerAddrType can be set to non-default only when the
following rules are met for objects in vRtrIfEntry with the same
indices:
- The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5)
- The value of tmnxPortEncapType in tmnxPortEntry indexed using
the value of vRtrIfPortID is set to unknown (0) or nullEncap (1)
or ipcpEncap (6)
When the value of vRtrIfIpcpPeerAddrType is unknown, the value of
vRtrIfIpcpPeerAddr is assumed to be of size 0."
DEFVAL { unknown }
::= { vRtrIfIpcpEntry 1 }
vRtrIfIpcpPeerAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIpcpPeerAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure
the remote peer's IP address. The type of this address is specified
by the value of vRtrIfIpcpPeerAddrType
vRtrIfIpcpPeerAddr can be set to on-default only when the following
rules are met for objects in vRtrIfEntry with the same indices:
- The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5)
- The value of tmnxPortEncapType in tmnxPortEntry indexed using
the value of vRtrIfPortID is set to unknown (0) or nullEncap (1)
or ipcpEncap (6)"
DEFVAL { ''H }
::= { vRtrIfIpcpEntry 2 }
vRtrIfIpcpPriDnsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIpcpPriDnsAddrType specifies the type of
vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used
by the remote peer.
vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the
following rules are met for objects in vRtrIfEntry with the same
indices:
- The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5)
- The value of tmnxPortEncapType in tmnxPortEntry indexed using
the value of vRtrIfPortID is set to unknown (0) or nullEncap (1)
or ipcpEncap (6)
When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of
vRtrIfIpcpPriDnsAddr is assumed to be of size 0."
DEFVAL { unknown }
::= { vRtrIfIpcpEntry 3 }
vRtrIfIpcpPriDnsAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure
the primary DNS's IP address on the remote peer. The type of this
address is specified by the value of vRtrIfIpcpPriDnsAddrType
vRtrIfIpcpPriDnsAddr can be set to non-default only when the following
rules are met for objects in vRtrIfEntry with the same indices:
- The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5)
- The value of tmnxPortEncapType in tmnxPortEntry indexed using
the value of vRtrIfPortID is set to unknown (0) or nullEncap (1)
or ipcpEncap (6)"
DEFVAL { ''H }
::= { vRtrIfIpcpEntry 4 }
vRtrIfIpcpSecDnsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIpcpSecDnsAddrType specifies the type of
vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used
by the remote peer.
vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the
following rules are met for objects in vRtrIfEntry with the same
indices:
- The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5)
- The value of tmnxPortEncapType in tmnxPortEntry indexed using
the value of vRtrIfPortID is set to unknown (0) or nullEncap (1)
or ipcpEncap (6)
When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of
vRtrIfIpcpSecDnsAddr is assumed to be of size 0."
DEFVAL { unknown }
::= { vRtrIfIpcpEntry 5 }
vRtrIfIpcpSecDnsAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure
the secondary DNS's IP address on the remote peer. The type of this
address is specified by the value of vRtrIfIpcpSecDnsAddrType.
vRtrIfIpcpSecDnsAddr can be set to non-default only when the following
rules are met for objects in vRtrIfEntry with the same indices:
- The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5)
- The value of tmnxPortEncapType in tmnxPortEntry indexed using
the value of vRtrIfPortID is set to unknown (0) or nullEncap (1)
or ipcpEncap (6)"
DEFVAL { ''H }
::= { vRtrIfIpcpEntry 6 }
--
-- Alcatel 7x50 SR series Virtual Router Static Route CPE Check Statistics Table
--
vRtrInetStatRteCpeChkStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VRtrInetStatRteCpeChkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vRtrInetStatRteCpeChkStatsTable has an entry for each entry
in the vRtrInetStaticRouteTable that has a non-default values set
for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr
objects."
::= { tmnxVRtrObjs 44 }
vRtrInetStatRteCpeChkStatsEntry OBJECT-TYPE
SYNTAX VRtrInetStatRteCpeChkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a collection of
Customer-Provided Equipment (CPE) availability statistics
for a virtual router static route in the system with non-default
values set for the vRtrInetStaticRouteCpeAddrType and
vRtrInetStaticRouteCpeAddr objects.
Entries cannot be created and deleted via SNMP SET operations."
INDEX {
vRtrID,
vRtrInetStaticRouteDestType,
vRtrInetStaticRouteDest,
vRtrInetStaticRouteDestPfxLen,
vRtrInetStaticRouteIndex
}
::= { vRtrInetStatRteCpeChkStatsTable 1 }
VRtrInetStatRteCpeChkStatsEntry ::=
SEQUENCE {
vRtrInetStatRteCpeChkUpTime TimeTicks,
vRtrInetStatRteCpeChkInPktCnt Counter32,
vRtrInetStatRteCpeChkOutPktCnt Counter32,
vRtrInetStatRteCpeChkDownTrans Gauge32,
vRtrInetStatRteCpeChkUpTrans Gauge32,
vRtrInetStatRteCpeChkTTL Unsigned32
}
vRtrInetStatRteCpeChkUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStatRteCpeChkUpTime indicates
how long (in hundredths of a second) that the CPE has been
available."
::= { vRtrInetStatRteCpeChkStatsEntry 1 }
vRtrInetStatRteCpeChkInPktCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStatRteCpeChkInPktCnt indicates the
number of echo-reply packets received."
::= { vRtrInetStatRteCpeChkStatsEntry 2 }
vRtrInetStatRteCpeChkOutPktCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStatRteCpeChkOutPktCnt indicates the
number of echo-request packets sent."
::= { vRtrInetStatRteCpeChkStatsEntry 3 }
vRtrInetStatRteCpeChkDownTrans OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStatRteCpeChkDownTrans indicates the number of
times the CPE has transitioned to the unavailable state."
::= { vRtrInetStatRteCpeChkStatsEntry 4 }
vRtrInetStatRteCpeChkUpTrans OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStatRteCpeChkUpTrans indicates the number of
times the CPE has transitioned to the available state."
::= { vRtrInetStatRteCpeChkStatsEntry 5 }
vRtrInetStatRteCpeChkTTL OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds,
before the CPE will be declared down. Upon receipt of an echo
reply, it has the value of
vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is
decremented by 1 every second."
::= { vRtrInetStatRteCpeChkStatsEntry 6 }
--
-- Application Id -> DSCP value mapping table
--
tmnxDscpAppTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDscpAppTableLastChanged indicates the sysUpTime
at the time of the last modification of tmnxDscpAppTable.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxVRtrObjs 45 }
tmnxDscpAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDscpAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDscpAppTable has an entry for each application to
Differential Services Code Point (DSCP) mapping in a
virtual routing context on this system."
::= { tmnxVRtrObjs 46 }
tmnxDscpAppEntry OBJECT-TYPE
SYNTAX TmnxDscpAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a mapping from an application to a DSCP
value for particular virtual routing context.
Entries are created at system initialization."
INDEX { vRtrID, tmnxDscpAppId }
::= { tmnxDscpAppTable 1}
TmnxDscpAppEntry ::= SEQUENCE
{
tmnxDscpAppId TDSCPAppId,
tmnxDscpAppLastChanged TimeStamp,
tmnxDscpAppDscpValue TDSCPValueOrNone
}
tmnxDscpAppId OBJECT-TYPE
SYNTAX TDSCPAppId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxDscpAppId indicates the DSCP application identifier
for a protocol on the Alcatel 7x50 SR router which generates
control traffic over IP."
::= { tmnxDscpAppEntry 1 }
tmnxDscpAppLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDscpAppLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxDscpAppEntry 2 }
tmnxDscpAppDscpValue OBJECT-TYPE
SYNTAX TDSCPValueOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxDscpAppDscpValue specifies a DSCP Value
to assign to the traffic generated by the application
specified by tmnxDscpAppId.
A value of -1 specifies that no explicit DSCP re-marking
will be done for the traffic generated by the application
specified by tmnxDscpAppId.
The default value is protocol specific."
::= { tmnxDscpAppEntry 3 }
--
-- DSCP Name -> Forwarding Class mapping table
--
tmnxDscpFCTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDscpFCTableLastChanged indicates the sysUpTime
at the time of the last modification of tmnxDscpFCTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxVRtrObjs 47 }
tmnxDscpFCTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDscpFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDscpFCTable has an entry for each mapping between
a DSCP value and a Forwarding Class for self-generated
protocol traffic in a virtual routing context on this system."
::= { tmnxVRtrObjs 48 }
tmnxDscpFCEntry OBJECT-TYPE
SYNTAX TmnxDscpFCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a mapping between a DSCP value and a
Forwarding Class for self-generated protocol traffic
in particular virtual routing context.
Entries are created at system initialization."
INDEX { vRtrID, tmnxDscpFCDscpValue }
::= { tmnxDscpFCTable 1}
TmnxDscpFCEntry ::= SEQUENCE
{
tmnxDscpFCDscpValue TDSCPValue,
tmnxDscpFCLastChanged TimeStamp,
tmnxDscpFCValue TFCType
}
tmnxDscpFCDscpValue OBJECT-TYPE
SYNTAX TDSCPValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxDscpFCDscpValue specifies a DSCP value which
will be mapped to the Forwarding Class specified by
tmnxDscpFCValue."
::= { tmnxDscpFCEntry 1 }
tmnxDscpFCLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDscpFCLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxDscpFCEntry 3 }
tmnxDscpFCValue OBJECT-TYPE
SYNTAX TFCType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxDscpFCValue specifies the Forwarding Class value
for this mapping entry.
The default value is best effort, which is specified by a value of 0."
DEFVAL { be }
::= { tmnxDscpFCEntry 4 }
--
-- Application Id -> 802.1p value mapping table
--
tmnxDot1pAppTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDot1pAppTableLastChanged indicates the
sysUpTime at the time of the last modification of
tmnxDot1pAppTable.
If no changes were made to the table since the last
re-initialization of the local network management
subsystem, then this object contains a zero value."
::= { tmnxVRtrObjs 49 }
tmnxDot1pAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxDot1pAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxDot1pAppTable has an entry for each application to
IEEE 802.1p priority (Dot1p) mapping in a virtual routing
context on this system."
::= { tmnxVRtrObjs 50 }
tmnxDot1pAppEntry OBJECT-TYPE
SYNTAX TmnxDot1pAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents a mapping from an application to a Dot1p
value for particular virtual routing context.
Entries are created at system initialization."
INDEX { vRtrID, tmnxDot1pAppId }
::= { tmnxDot1pAppTable 1}
TmnxDot1pAppEntry ::= SEQUENCE
{
tmnxDot1pAppId TDot1pAppId,
tmnxDot1pAppLastChanged TimeStamp,
tmnxDot1pAppValue Dot1PPriority
}
tmnxDot1pAppId OBJECT-TYPE
SYNTAX TDot1pAppId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxDot1pAppId indicates the Dot1p application
identifier for a Layer-2 protocol on the Alcatel 7x50 SR router."
::= { tmnxDot1pAppEntry 1 }
tmnxDot1pAppLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxDot1pAppLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value."
::= { tmnxDot1pAppEntry 2 }
tmnxDot1pAppValue OBJECT-TYPE
SYNTAX Dot1PPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxDot1pAppValue specifies a Dot1p
value to assign to the traffic generated by the application
specified by tmnxDot1pAppId.
The default value is protocol specific."
::= { tmnxDot1pAppEntry 3 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- Objects for AutoFilter trap
tmnxVRtrNotificationObjects OBJECT IDENTIFIER ::= {tmnxVRtrObjs 21}
vRtrAutoFilterDHCPClientAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The Client IP address from the PDU causing the trap.
Used by tmnxVRtrDHCPAFEntriesExceeded to report
the client's IP address."
::= { tmnxVRtrNotificationObjects 1 }
vRtrAutoFilterDHCPClientLease OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The lease time specified in the PDU causing the trap.
Used by tmnxVRtrDHCPAFEntriesExceeded to report
the lease time."
::= { tmnxVRtrNotificationObjects 2 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- Objects for DHCP traps
vRtrDHCPClientLease
OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDHCPClientLease indicates the
lease time specified in the PDU causing the trap."
::= { tmnxVRtrNotificationObjects 3}
vRtrDhcpLseStateOldCiAddr
OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpLseStateOldCiAddr indicates
the Client IP address that was formerly assigned to this
Least state."
::= { tmnxVRtrNotificationObjects 4}
vRtrDhcpLseStateOldChAddr
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpLseStateOldChAddr indicates
the Client MAC address that was formerly assigned to this
Least state."
::= { tmnxVRtrNotificationObjects 5}
vRtrDhcpLseStateNewCiAddr
OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpLseStateNewCiAddr indicates
the Client IP address specified in the PDU causing
the trap."
::= { tmnxVRtrNotificationObjects 6}
vRtrDhcpLseStateNewChAddr
OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpLseStateNewChAddr indicates
the Client MAC address specified in the PDU causing
the trap."
::= { tmnxVRtrNotificationObjects 7}
vRtrDhcpRestoreLseStateCiAddr
OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateCiAddr indicates
the IP address specified in the persistency record causing
the trap."
::= { tmnxVRtrNotificationObjects 8}
vRtrDhcpRestoreLseStateVRtrId
OBJECT-TYPE
SYNTAX TmnxVRtrID
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateVRtrId indicates
the serviceId specified in the persistency record causing
the trap."
::= { tmnxVRtrNotificationObjects 9}
vRtrDhcpRestoreLseStateIfIndex
OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateIfIndex indicates
the Port ID specified in the persistency record causing
the trap."
::= { tmnxVRtrNotificationObjects 10}
vRtrDhcpRestoreLseStateProblem
OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateProblem
indicates why the persisency record cannot be restored."
::= { tmnxVRtrNotificationObjects 11}
vRtrDhcpPacketProblem
OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDhcpPacketProblem indicates
information on a received DHCP packet is considered
suspicious by the system."
::= { tmnxVRtrNotificationObjects 12}
vRtrDhcpLseStatePopulateError
OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION "The value of the object vRtrDhcpLseStatePopulateError
indicates the reason why the system was unable to update
the Lease state table with the information contained in
the received DHCP ACK message."
::= { tmnxVRtrNotificationObjects 13}
vRtrBfdSlotNumber
OBJECT-TYPE
SYNTAX TmnxSlotNum
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrBfdSlotNumber indicates the IOM slot
number where the number of supported BFD sessions has
reached the maximum value. This object is reported
when the tmnxVRtrBfdMaxSessionOnSlot notification
is generated."
::= { tmnxVRtrNotificationObjects 14}
vRtrNumberOfBfdSessionsOnSlot
OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrNumberOfBfdSessionsOnSlot indicates the
current number of BFD sessions on the slot indicated by
vRtrBfdSlotNumber. This object is reported when the
tmnxVRtrBfdMaxSessionOnSlot notification is generated."
::= { tmnxVRtrNotificationObjects 15}
vRtrBfdMaxSessionReason
OBJECT-TYPE
SYNTAX BITS {
maxSessionsPerSlot(0),
maxTxPacketRate(1),
maxRxPacketRate(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrBfdMaxSessionReason indicates the
reason the maximum numbers of sessions on this IOM
slot was reached. This object is reported when the
tmnxVRtrBfdMaxSessionOnSlot notification is
generated."
::= { tmnxVRtrNotificationObjects 16}
vRtrDHCP6ServerNetAddrType
OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6ServerNetAddrType
indicates the address type of vRtrDHCP6ServerNetAddr."
::= { tmnxVRtrNotificationObjects 17 }
vRtrDHCP6ServerNetAddr
OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6ServerNetAddr
indicates the IP address of the DHCP server."
::= { tmnxVRtrNotificationObjects 18 }
vRtrDHCP6ClientNetAddrType
OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6ClientNetAddrType
indicates the address type of vRtrDHCP6ClientNetAddr."
::= { tmnxVRtrNotificationObjects 19 }
vRtrDHCP6ClientNetAddr
OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6ClientNetAddr
indicates the IP address of the DHCP client."
::= { tmnxVRtrNotificationObjects 20 }
vRtrDHCP6AssignedNetAddrType
OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6AssignedNetAddrType
indicates the address type of vRtrDHCP6AssignedNetAddr."
::= { tmnxVRtrNotificationObjects 21 }
vRtrDHCP6AssignedNetAddr
OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6AssignedNetAddr
indicates the IP address assigned to the DHCP client."
::= { tmnxVRtrNotificationObjects 22 }
vRtrDHCP6AssignedPrefixLen
OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrDHCP6AssignedPrefixLen specifies
the length of the IP netmask for vRtrDHCP6AssignedNetAddr."
::= { tmnxVRtrNotificationObjects 23 }
vRtrDHCP6OldAssignedNetAddrType
OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6OldAssignedNetAddrType
indicates the address type of vRtrDHCP6OldAssignedNetAddr."
::= { tmnxVRtrNotificationObjects 24 }
vRtrDHCP6OldAssignedNetAddr
OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6OldAssignedNetAddr
indicates the IP address formerly assigned to the DHCP
client."
::= { tmnxVRtrNotificationObjects 25 }
vRtrDHCP6OldAssignedPrefixLen
OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrDHCP6OldAssignedPrefixLen specifies the
length of the IP netmask for vRtrDHCP6OldAssignedNetAddr."
::= { tmnxVRtrNotificationObjects 26 }
vRtrDHCP6NewClientId
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrDHCP6NewClientId indicates the new
DHCP6 clients unique identifier (DUID)."
::= { tmnxVRtrNotificationObjects 27 }
vRtrDHCP6OldClientId
OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrDHCP6OldClientId indicates the old
DHCP6 clients unique identifier (DUID)."
::= { tmnxVRtrNotificationObjects 28 }
vRtrDHCP6LeaseOverrideResult
OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrDHCP6LeaseOverrideResult
indicates whether or not the lease state has been
overridden."
::= { tmnxVRtrNotificationObjects 29 }
vRtrInetStatRteCpeNotifyAddrType
OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrInetStatRteCpeNotifyAddrType
indicates the address type of
vRtrInetStatRteCpeNotifyAddr."
::= { tmnxVRtrNotificationObjects 30 }
vRtrInetStatRteCpeNotifyAddr
OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrInetStatRteCpeNotifyAddr
indicates the IP address of the CPE."
::= { tmnxVRtrNotificationObjects 31 }
vRtrInetStaticRouteCpeStatus
OBJECT-TYPE
SYNTAX INTEGER {
reachable (0),
unreachable (1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrInetStaticRouteCpeStatus
indicates whether or not the CPE associated with a
static route is 'reachable' or 'unreachable'."
::= { tmnxVRtrNotificationObjects 32 }
vRtrManagedRouteInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrManagedRouteInetAddrType indicates
the address type of vRtrManagedRouteInetAddr."
::= { tmnxVRtrNotificationObjects 33 }
vRtrManagedRouteInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0|4))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrManagedRouteInetAddr indicates
the IP address of the managed route."
::= { tmnxVRtrNotificationObjects 34 }
vRtrManagedRoutePrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of vRtrManagedRoutePrefixLen indicates
the prefix length of the subnet associated with
vRtrManagedRouteInetAddr."
::= { tmnxVRtrNotificationObjects 35 }
vRtrFailureDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The value of the object vRtrFailureDescription is a
printable character string which contains information
about the reason why the notification is sent."
::= { tmnxVRtrNotificationObjects 36 }
--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
-- ALCATEL-IND1-TIMETRA-VRTR-MIB Notifications
--
tmnxVRtrMidRouteTCA NOTIFICATION-TYPE
OBJECTS {
vRtrStatCurrNumRoutes,
vRtrMidRouteThreshold
}
STATUS current
DESCRIPTION
"The tmnxVRtrMidRouteTCA notification is generated when the number
of routes contained in a VPRN exceeds the value specified by
vRtrMidRouteThreshold. No other notifications of this type
are generated until after the soak period specified by
vRtrRouteThresholdSoakTime has expired."
::= { tmnxVRtrNotifications 1 }
tmnxVRtrHighRouteTCA NOTIFICATION-TYPE
OBJECTS {
vRtrStatCurrNumRoutes,
vRtrHighRouteThreshold
}
STATUS current
DESCRIPTION
"The tmnxVRtrHighRouteTCA notification is generated when the number
of routes contained in a VPRN exceeds the value specified by
vRtrHighRouteThreshold. No other notifications of this type
are generated until after the soak period specified by
vRtrRouteThresholdSoakTime has expired."
::= { tmnxVRtrNotifications 2 }
tmnxVRtrHighRouteCleared NOTIFICATION-TYPE
OBJECTS {
vRtrStatCurrNumRoutes,
vRtrHighRouteThreshold
}
STATUS current
DESCRIPTION
"The tmnxVRtrHighRouteCleared notification is generated when the
number of routes contained in a VPRN has dropped below the
vRtrHighRouteThreshold value following the generation of a
tmnxVRtrHighRouteTCA notification."
::= { tmnxVRtrNotifications 3 }
tmnxVRtrIllegalLabelTCA NOTIFICATION-TYPE
OBJECTS {
vRtrStatIllegalLabels,
vRtrIllegalLabelThreshold
}
STATUS current
DESCRIPTION
"The tmnxVRtrIllegalLabelTCA notification is generated when the
number of illegal label violations on a VRF has exceeded the
value specified by vRtrIllegalLabelThreshold."
::= { tmnxVRtrNotifications 4 }
tmnxVRtrMcastMidRouteTCA NOTIFICATION-TYPE
OBJECTS {
vRtrMulticastRoutes,
vRtrMcastMidRouteThreshold
}
STATUS current
DESCRIPTION
"The tmnxVRtrMcastMidRouteTCA notification is generated when the number
of multicast routes contained in a VPRN exceeds the value specified by
vRtrMcastMidRouteThreshold. No other notifications of this type
are generated until after the soak period specified by
vRtrRouteThresholdSoakTime has expired."
::= { tmnxVRtrNotifications 5 }
tmnxVRtrMcastMaxRoutesTCA NOTIFICATION-TYPE
OBJECTS {
vRtrMulticastRoutes,
vRtrMaxMcastNumRoutes
}
STATUS current
DESCRIPTION
"The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number
of multicast routes contained in a VPRN exceeds the value specified by
vRtrMaxMcastNumRoutes. No other notifications of this type
are generated until after the soak period specified by
vRtrRouteThresholdSoakTime has expired."
::= { tmnxVRtrNotifications 6 }
tmnxVRtrMcastMaxRoutesCleared NOTIFICATION-TYPE
OBJECTS {
vRtrMulticastRoutes,
vRtrMaxMcastNumRoutes
}
STATUS current
DESCRIPTION
"The tmnxVRtrMcastMaxRoutesCleared notification is generated when the
number of multicast routes contained in a VPRN has dropped below the
vRtrMaxMcastNumRoutes value following the generation of a
tmnxVRtrMcastMaxRoutesTCA notification."
::= { tmnxVRtrNotifications 7 }
tmnxVRtrMaxArpEntriesTCA NOTIFICATION-TYPE
OBJECTS {
vRtrStatActiveARPEntries,
vRtrStatTotalARPEntries,
vRtrMaxARPEntries
}
STATUS current
DESCRIPTION
"The tmnxVRtrMaxArpEntriesTCA notification is generated when the
number of ARP entries in a VPRN exceeds the maximum supported."
::= { tmnxVRtrNotifications 8 }
tmnxVRtrMaxArpEntriesCleared NOTIFICATION-TYPE
OBJECTS {
vRtrStatActiveARPEntries,
vRtrStatTotalARPEntries,
vRtrMaxARPEntries
}
STATUS current
DESCRIPTION
"The tmnxVRtrMaxArpEntriesCleared notification is generated when the
number of ARP entries contained in a VPRN has dropped below the
maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA
notification."
::= { tmnxVRtrNotifications 9 }
tmnxVRtrDHCPAFEntriesExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrIfDHCPOperAutoFilter,
vRtrIfIndex,
vRtrAutoFilterDHCPClientAddress,
vRtrAutoFilterDHCPClientLease
}
STATUS obsolete
DESCRIPTION
"The tmnxVRtrDHCPAFEntriesExceeded notification is generated
when the number of DHCP 'AutoFilter' entries on a given interface
reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter."
::= {tmnxVRtrNotifications 10}
tmnxVRtrMaxRoutes NOTIFICATION-TYPE
OBJECTS {
vRtrStatCurrNumRoutes,
vRtrMaxNumRoutes
}
STATUS current
DESCRIPTION "The tmnxVRtrMaxRoutes notification is
generated when the number of routes contained in a
VPRN reaches the value specified by vRtrMaxNumRoutes."
::= { tmnxVRtrNotifications 11 }
tmnxVRtrDHCPLseStsExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDhcpLseStateNewCiAddr,
vRtrDhcpLseStateNewChAddr,
vRtrDHCPClientLease
}
STATUS obsolete
DESCRIPTION "The tmnxVRtrDHCPLseStsExceeded notification is
generated when the number of DHCP lease states
entries on a given interface reaches a user configurable
upper limit."
::= {tmnxVRtrNotifications 12}
tmnxVRtrDHCPLeaseStateOverride NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDhcpLseStateNewCiAddr,
vRtrDhcpLseStateNewChAddr,
vRtrDhcpLseStateOldCiAddr,
vRtrDhcpLseStateOldChAddr
}
STATUS obsolete
DESCRIPTION "The tmnxVRtrDHCPLeaseStateOverride notification is
generated when an existing DHCP lease state is
overridden by a new lease state which has the same
IP address but a different MAC address."
::= {tmnxVRtrNotifications 13}
tmnxVRtrDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDhcpPacketProblem
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCPSuspiciousPcktRcvd notification is
generated when a DHCP packet is received with suspicious
content."
::= {tmnxVRtrNotifications 14}
tmnxVRtrDHCPLseStRestoreProblem NOTIFICATION-TYPE
OBJECTS {
vRtrDhcpRestoreLseStateVRtrId,
vRtrDhcpRestoreLseStateIfIndex,
vRtrDhcpRestoreLseStateCiAddr,
vRtrDhcpRestoreLseStateProblem
}
STATUS obsolete
DESCRIPTION "The tmnxVRtrDHCPLseStRestoreProblem notification is
generated when an an error is detected while
processing a persistency record."
::= {tmnxVRtrNotifications 15}
tmnxVRtrDHCPLseStatePopulateErr NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDhcpLseStatePopulateError
}
STATUS obsolete
DESCRIPTION "The tmnxVRtrDHCPLseStatePopulateErr notification
indicates that the system was unable to update the
Lease State Table with the information contained in
the DHCP ACK message. The DHCP ACK message has been
discarded."
::= {tmnxVRtrNotifications 16}
tmnxVRtrBfdSessionDown NOTIFICATION-TYPE
OBJECTS {
vRtrIfBfdSessionLclDisc,
vRtrIfBfdSessionOperFlags
}
STATUS current
DESCRIPTION "The tmnxVRtrBfdSessionDown notification is generated when
a BFD session goes down."
::= {tmnxVRtrNotifications 17}
tmnxVRtrBfdMaxSessionOnSlot NOTIFICATION-TYPE
OBJECTS {
vRtrBfdSlotNumber,
vRtrNumberOfBfdSessionsOnSlot,
vRtrBfdMaxSessionReason
}
STATUS current
DESCRIPTION "The tmnxVRtrBfdMaxSessionOnSlot notification is generated
when the maximum number of BFD sessions has been reached
on the slot indicated in 'vRtrBfdSlotNumber'."
::= {tmnxVRtrNotifications 18}
tmnxVRtrBfdPortTypeNotSupported NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxPortType
}
STATUS current
DESCRIPTION "The tmnxVRtrBfdPortTypeNotSupported notification is
generated when BFD is not supported on the port specified
in 'tmnxPortNotifyPortId'."
::= {tmnxVRtrNotifications 19}
tmnxVRtrDHCPIfLseStatesExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
sapPortId,
sapEncapValue,
vRtrIfDHCPLeasePopulate,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpClientLease
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCPIfLseStatesExceeded notifications is
generated when the number of lease states on an interface
exceeds vRtrIfDHCPLeasePopulate."
::= {tmnxVRtrNotifications 20}
tmnxVRtrDHCP6RelayLseStExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrIfDHCP6LeasePopulate,
vRtrDHCP6AssignedNetAddrType,
vRtrDHCP6AssignedNetAddr,
vRtrDHCP6AssignedPrefixLen,
vRtrDHCP6NewClientId,
svcDhcpClientLease
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6RelayLseStExceeded notifications is
generated when the number of lease states populated by
dhcp6 relay on an interface exceeds
vRtrIfDHCP6LeasePopulate."
::= {tmnxVRtrNotifications 21}
tmnxVRtrDHCP6ServerLseStExceeded NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrIfDHCP6ServerMaxLeaseStates,
vRtrDHCP6AssignedNetAddrType,
vRtrDHCP6AssignedNetAddr,
vRtrDHCP6AssignedPrefixLen,
vRtrDHCP6NewClientId,
svcDhcpClientLease
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6ServerLseStExceeded notifications is
generated when the number of lease states populated by
dhcp6 server on an interface exceeds
vRtrIfDHCP6ServerMaxLeaseStates."
::= {tmnxVRtrNotifications 22}
tmnxVRtrDHCP6LseStateOverride NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDHCP6OldAssignedNetAddrType,
vRtrDHCP6OldAssignedNetAddr,
vRtrDHCP6OldAssignedPrefixLen,
vRtrDhcpLseStateOldChAddr,
vRtrDHCP6OldClientId,
vRtrDHCP6AssignedNetAddrType,
vRtrDHCP6AssignedNetAddr,
vRtrDHCP6AssignedPrefixLen,
vRtrDhcpLseStateNewChAddr,
vRtrDHCP6NewClientId,
vRtrDHCP6LeaseOverrideResult
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6LseStateOverride notifications is
generated when an existing DHCP6 lease state can be
overridden by a new lease state.
This is allowed if the new lease state has the same IP
address but a different client id or mac address.
This is not allowed if the new lease state has the same IP
address but a different prefix length."
::= {tmnxVRtrNotifications 23}
tmnxVRtrDHCP6RelayReplyStripUni NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDHCP6ServerNetAddrType,
vRtrDHCP6ServerNetAddr
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6RelayReplyStripUni notifications is
generated when a unicast option is stripped from a message
relayed from a server to a client
in a relay reply message."
::= {tmnxVRtrNotifications 24}
tmnxVRtrDHCP6IllegalClientAddr NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDHCP6ClientNetAddrType,
vRtrDHCP6ClientNetAddr
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6IllegalClientAddr notifications is
generated when an incoming message is dropped
because the client's source IP does not match the subnet
of the incoming interface."
::= {tmnxVRtrNotifications 25}
tmnxVRtrDHCP6AssignedIllegSubnet NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDHCP6ClientNetAddrType,
vRtrDHCP6ClientNetAddr,
vRtrDHCP6AssignedNetAddrType,
vRtrDHCP6AssignedNetAddr,
vRtrDHCP6AssignedPrefixLen
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6AssignedIllegSubnet notifications is
generated when an IP address assigned to the client
does not match the subnet of the interface."
::= {tmnxVRtrNotifications 26}
tmnxVRtrDHCP6ClientMacUnresolved NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrServiceId,
vRtrIfIndex,
vRtrDHCP6ClientNetAddrType,
vRtrDHCP6ClientNetAddr
}
STATUS current
DESCRIPTION "The tmnxVRtrDHCP6ClientMacUnresolved notifications is
generated when we receive a relay reply for a client,
and the client's MAC address has not been resolved yet."
::= {tmnxVRtrNotifications 27}
tmnxVRtrBfdSessionUp NOTIFICATION-TYPE
OBJECTS {
vRtrIfBfdSessionLclDisc
}
STATUS current
DESCRIPTION "The tmnxVRtrBfdSessionUp notification is generated when
a BFD session goes up."
::= {tmnxVRtrNotifications 28}
tmnxVRtrIPv6MidRouteTCA NOTIFICATION-TYPE
OBJECTS {
vRtrV6StatCurrNumRoutes,
vRtrIPv6MidRouteThreshold
}
STATUS current
DESCRIPTION "The tmnxVRtrIPv6MidRouteTCA notification is generated when
the number of IPv6 routes contained in a VPRN exceeds
the value specified by vRtrIPv6MidRouteThreshold. No other
notifications of this type are generated until after the
soak period specified by vRtrIPv6RouteThresholdSoakTime
has expired."
::= { tmnxVRtrNotifications 29 }
tmnxVRtrIPv6HighRouteTCA NOTIFICATION-TYPE
OBJECTS {
vRtrV6StatCurrNumRoutes,
vRtrIPv6HighRouteThreshold
}
STATUS current
DESCRIPTION "The tmnxVRtrIPv6HighRouteTCA notification is generated when
the number of IPv6 routes contained in a VPRN exceeds
the value specified by vRtrIPv6HighRouteThreshold. No other
notifications of this type are generated until after the
soak period specified by vRtrIPv6RouteThresholdSoakTime
has expired."
::= { tmnxVRtrNotifications 30 }
tmnxVRtrIPv6HighRouteCleared NOTIFICATION-TYPE
OBJECTS {
vRtrV6StatCurrNumRoutes,
vRtrIPv6HighRouteThreshold
}
STATUS current
DESCRIPTION "The tmnxVRtrIPv6HighRouteCleared notification is generated
when the number of IPv6 routes contained in a VPRN has
dropped below the vRtrIPv6HighRouteThreshold value
following the generation of a tmnxVRtrIPv6HighRouteTCA
notification."
::= { tmnxVRtrNotifications 31 }
tmnxVRtrStaticRouteCPEStatus NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrInetStatRteCpeNotifyAddrType,
vRtrInetStatRteCpeNotifyAddr,
vRtrInetStaticRouteCpeStatus
}
STATUS current
DESCRIPTION "The tmnxVRtrStaticRouteCPEStatus notification is generated
when a CPE associated with a static route, as specified
by the vRtrInetStatRteCpeNotifyAddr object, becomes
reachable or unreachable."
::= { tmnxVRtrNotifications 32 }
tmnxVRtrBfdSessionDeleted NOTIFICATION-TYPE
OBJECTS {
vRtrIfBfdSessionLclDisc,
vRtrIfBfdSessionOperFlags
}
STATUS current
DESCRIPTION "The tmnxVRtrBfdSessionDeleted notification is generated when
a BFD session is deleted."
::= {tmnxVRtrNotifications 33 }
tmnxVRtrBfdSessionProtChange NOTIFICATION-TYPE
OBJECTS {
vRtrIfBfdSessionLclDisc,
vRtrIfBfdSessionProtocols
}
STATUS current
DESCRIPTION "The tmnxVRtrBfdSessionProtChange notification is generated when
there is a change in the list of protocols using the BFD session."
::= {tmnxVRtrNotifications 34 }
tmnxVRtrManagedRouteAddFailed NOTIFICATION-TYPE
OBJECTS {
vRtrID,
vRtrManagedRouteInetAddrType,
vRtrManagedRouteInetAddr,
vRtrManagedRoutePrefixLen,
vRtrFailureDescription
}
STATUS current
DESCRIPTION "The tmnxVRtrManagedRouteAddFailed notification
is generated when a managed route could not be installed."
::= { tmnxVRtrNotifications 35 }
--
-- Conformance Information
--
tmnxVRtrCompliances OBJECT IDENTIFIER ::= { tmnxVRtrConformance 1 }
tmnxVRtrGroups OBJECT IDENTIFIER ::= { tmnxVRtrConformance 2 }
-- compliance statements
-- tmnxVRtrCompliance MODULE-COMPLIANCE
-- ::= { tmnxVRtrCompliances 1 }
-- tmnxVRtrR2r1Compliance MODULE-COMPLIANCE
-- ::= { tmnxVRtrCompliances 2 }
-- tmnxVRtrV3v0Compliance MODULE-COMPLIANCE
-- ::= { tmnxVRtrCompliances 3 }
tmnxVRtr7450V4v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of VRTR instances
on Alcatel 7450 ESS series systems release R4.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxVRtrGlobalR2r1Group,
tmnxVRtrV4v0Group,
tmnxVRtrIfV4v0Group,
tmnxVRtrIpV4v0Group,
-- tmnxVRtrIPv6V4v0Group,
-- tmnxVRtrIPv6IpV4v0Group,
-- tmnxVRtrIPv6IfV4v0Group,
tmnxVRtrNotificationV4v0Group,
tmnxVRtrIfSubscrAuthV3v0Group,
tmnxVRtrBfdV4v0Group
}
::= { tmnxVRtrCompliances 4 }
tmnxVRtr7750V4v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of VRTR instances
on Alcatel 7750 SR series systems release R4.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxVRtrGlobalR2r1Group,
tmnxVRtrV4v0Group,
tmnxVRtrIfV4v0Group,
tmnxVRtrIpV4v0Group,
tmnxVRtrIPv6V4v0Group,
tmnxVRtrIPv6IpV4v0Group,
tmnxVRtrIPv6IfV4v0Group,
tmnxVRtrNotificationV4v0Group,
tmnxVRtrIfSubscrAuthV3v0Group,
tmnxVRtrBfdV4v0Group
}
::= { tmnxVRtrCompliances 5 }
tmnxVRtr7450V5v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of VRTR instances
on Alcatel 7450 ESS series systems release R5.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxVRtrGlobalR2r1Group,
tmnxVRtrV5v0Group,
tmnxVRtrIfV5v0Group,
tmnxVRtrIpV5v0Group,
-- tmnxVRtrIPv6V4v0Group,
-- tmnxVRtrIPv6IpV5v0Group,
-- tmnxVRtrIPv6IfV4v0Group,
tmnxVRtrNotificationV5v0Group,
tmnxVRtrIfSubscrAuthV3v0Group,
tmnxVRtrBfdV4v0Group
}
::= { tmnxVRtrCompliances 6 }
tmnxVRtr7750V5v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of VRTR instances
on Alcatel 7750 SR series systems release R5.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxVRtrGlobalR2r1Group,
tmnxVRtrV5v0Group,
tmnxVRtrIfV5v0Group,
tmnxVRtrIpV5v0Group,
tmnxVRtrIPv6V4v0Group,
tmnxVRtrIPv6IpV5v0Group,
tmnxVRtrIPv6IfV4v0Group,
tmnxVRtrNotificationV5v0Group,
tmnxVRtrIfSubscrAuthV3v0Group,
tmnxVRtrBfdV4v0Group
}
::= { tmnxVRtrCompliances 7 }
tmnxVRtr7450V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of VRTR instances
on Alcatel 7450 ESS series systems release R6.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxVRtrGlobalV6v0Group,
tmnxVRtrV6v0Group,
tmnxVRtrIfV5v0Group,
tmnxVRtrIpV5v0Group,
-- tmnxVRtrIPv6V4v0Group,
-- tmnxVRtrIPv6IpV5v0Group,
-- tmnxVRtrIPv6IfV4v0Group,
-- tmnxVRtrIfDhcpServerGroup,
tmnxVRtrNotificationV6v0Group,
tmnxVRtrIfSubscrAuthV3v0Group,
tmnxVRtrBfdV6v0Group,
tmnxVRtrStaticRteCPEChkV6v0Group,
-- tmnxVRtrIfIpcpV6v0Group,
tmnxDscpAppV6v0Group,
tmnxVRtrIfDHCPRelayGroup
}
::= { tmnxVRtrCompliances 8 }
tmnxVRtr77x0V6v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of VRTR instances
on Alcatel 7x50 SR series systems release R6.0."
MODULE -- this module
MANDATORY-GROUPS {
tmnxVRtrGlobalV6v0Group,
tmnxVRtrV6v0Group,
tmnxVRtrIfV5v0Group,
tmnxVRtrIpV5v0Group,
tmnxVRtrIPv6V4v0Group,
tmnxVRtrIPv6IpV5v0Group,
tmnxVRtrIPv6IfV4v0Group,
tmnxVRtrIfDhcpServerGroup,
tmnxVRtrNotificationV6v0Group,
tmnxVRtrIfSubscrAuthV3v0Group,
tmnxVRtrBfdV6v0Group,
tmnxVRtrStaticRteCPEChkV6v0Group,
tmnxVRtrIfIpcpV6v0Group,
tmnxVRtrIfCpmProtectGroup,
tmnxDscpAppV6v0Group,
tmnxVRtrIfDHCPRelayGroup
}
::= { tmnxVRtrCompliances 9 }
-- units of conformance
-- tmnxVRtrGlobalGroup OBJECT-GROUP
-- ::= { tmnxVRtrGroups 1 }
-- tmnxVRtrGroup OBJECT-GROUP
-- ::= { tmnxVRtrGroups 2 }
-- tmnxVRtrIfGroup OBJECT-GROUP
-- ::= { tmnxVRtrGroups 3 }
-- tmnxVRtrIpGroup OBJECT-GROUP
-- ::= { tmnxVRtrGroups 4 }
-- tmnxVRtrNotificationGroup NOTIFICATION-GROUP
-- ::= { tmnxVRtrGroups 5 }
-- tmnxVRtrR2r1Group OBJECT-GROUP
-- ::= { tmnxVRtrGroups 6 }
-- tmnxVRtrIpR2r1Group OBJECT-GROUP
-- ::= { tmnxVRtrGroups 7 }
-- tmnxVRtrNotificationR2r1Group NOTIFICATION-GROUP
-- ::= { tmnxVRtrGroups 8 }
-- tmnxVRtrIfR2r1Group OBJECT-GROUP
-- ::= { tmnxVRtrGroups 9 }
tmnxVRtrGlobalR2r1Group OBJECT-GROUP
OBJECTS { vRtrNextVRtrID,
vRtrConfiguredVRtrs,
vRtrActiveVRtrs,
vRtrRouteThresholdSoakTime,
vRtrMaxARPEntries
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of general
capabilities for transport and virtual routers
on version 2.1 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 10 }
tmnxVRtrIfSubscrAuthV3v0Group OBJECT-GROUP
OBJECTS { vRtrIfDHCPAuthPolicy,
vRtrIfDHCPRelayAuthPktsDiscarded,
vRtrIfDHCPRelayAuthPktsSuccess
}
STATUS current
DESCRIPTION
"The group of objects supporting management of DHCP
authentication on version 3.0 Alcatel 7x50 SR series
systems."
::= { tmnxVRtrGroups 11 }
-- tmnxVRtrIfV3v0Group OBJECT-GROUP
-- ::= { tmnxVRtrGroups 12 }
-- tmnxVRtrNotificationV3v0Group NOTIFICATION-GROUP
-- ::= { tmnxVRtrGroups 13 }
tmnxVRtrV4v0Group OBJECT-GROUP
OBJECTS { vRtrRowStatus,
vRtrAdminState,
vRtrName,
vRtrMaxNumRoutes,
vRtrBgpStatus,
vRtrMplsStatus,
vRtrOspfStatus,
vRtrRipStatus,
vRtrRsvpStatus,
vRtrEcmpMaxRoutes,
vRtrAS,
vRtrNewIfIndex,
vRtrLdpStatus,
vRtrIsIsStatus,
vRtrRouterId,
vRtrTriggeredPolicy,
vRtrConfederationAS,
vRtrRouteDistinguisher,
vRtrMidRouteThreshold,
vRtrHighRouteThreshold,
vRtrIllegalLabelThreshold,
vRtrVpnId,
vRtrDescription,
vRtrGracefulRestart,
vRtrGracefulRestartType,
vRtrType,
vRtrServiceId,
vRtrCustId,
vRtrIgmpStatus,
vRtrMaxNumRoutesLogOnly,
vRtrVrfTarget,
vRtrVrfExportTarget,
vRtrVrfImportTarget,
vRtrPimStatus,
vRtrMaxMcastNumRoutes,
vRtrMaxMcastNumRoutesLogOnly,
vRtrMcastMidRouteThreshold,
vRtrIgnoreIcmpRedirect,
vRtrOspfv3Status,
vRtrImportPolicy1,
vRtrImportPolicy2,
vRtrImportPolicy3,
vRtrImportPolicy4,
vRtrImportPolicy5,
vRtrExportPolicy1,
vRtrExportPolicy2,
vRtrExportPolicy3,
vRtrExportPolicy4,
vRtrExportPolicy5,
vRtrOperState,
vRtrDirectRoutes,
vRtrDirectActiveRoutes,
vRtrStaticRoutes,
vRtrStaticActiveRoutes,
vRtrOSPFRoutes,
vRtrOSPFActiveRoutes,
vRtrBGPRoutes,
vRtrBGPActiveRoutes,
vRtrISISRoutes,
vRtrISISActiveRoutes,
vRtrRIPRoutes,
vRtrRIPActiveRoutes,
vRtrAggregateRoutes,
vRtrAggregateActiveRoutes,
vRtrStatConfiguredIfs,
vRtrStatActiveIfs,
vRtrStatIllegalLabels,
vRtrStatCurrNumRoutes,
vRtrStatBGPVpnRoutes,
vRtrStatBGPVpnActiveRoutes,
vRtrStatTotalLdpTunnels,
vRtrStatTotalSdpTunnels,
vRtrStatActiveLdpTunnels,
vRtrStatActiveSdpTunnels,
vRtrMulticastRoutes,
vRtrStatActiveARPEntries,
vRtrStatTotalARPEntries,
vRtrSubMgmtRoutes,
vRtrSubMgmtActiveRoutes
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of transport and
virtual routers on version 4.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 14 }
tmnxVRtrIfV4v0Group OBJECT-GROUP
OBJECTS { vRtrIfTotalNumber,
vRtrIfRowStatus,
vRtrIfType,
vRtrIfName,
vRtrIfPortID,
vRtrIfChannelID,
vRtrIfEncapValue,
vRtrIfAdminState,
vRtrIfOperState,
vRtrIfAlias,
vRtrIfPhysicalAddress,
vRtrIfArpTimeout,
vRtrIfIcmpMaskReply,
vRtrIfIcmpRedirects,
vRtrIfIcmpNumRedirects,
vRtrIfIcmpRedirectsTime,
vRtrIfIcmpUnreachables,
vRtrIfIcmpNumUnreachables,
vRtrIfIcmpUnreachablesTime,
vRtrIfIcmpTtlExpired,
vRtrIfIcmpNumTtlExpired,
vRtrIfIcmpTtlExpiredTime,
vRtrIfNtpBroadcast,
vRtrIfUnnumbered,
vRtrIfMtu,
vRtrIfQosPolicyId,
vRtrIfIngressFilterId,
vRtrIfEgressFilterId,
vRtrIfDirectedBroadcast,
vRtrIfMplsStatus,
vRtrIfUnnumberedIf,
vRtrIfCflowd,
vRtrIfVPNClass,
vRtrIfDescription,
vRtrIfProtocol,
vRtrIfTosMarkingTrusted,
vRtrIfServiceId,
vRtrIfArpPopulate,
vRtrIfProxyArp,
vRtrIfProxyArpLocal,
vRtrIfProxyArpPolicy1,
vRtrIfProxyArpPolicy2,
vRtrIfProxyArpPolicy3,
vRtrIfProxyArpPolicy4,
vRtrIfProxyArpPolicy5,
vRtrIfNameIndex,
vRtrIfDHCPRelayInfoAction,
vRtrIfDHCPRelayCircuitId,
vRtrIfDHCPRelayRemoteId,
vRtrIfDHCPRelayServer1,
vRtrIfDHCPRelayServer2,
vRtrIfDHCPRelayServer3,
vRtrIfDHCPRelayServer4,
vRtrIfDHCPRelayServer5,
vRtrIfDHCPRelayServer6,
vRtrIfDHCPRelayServer7,
vRtrIfDHCPRelayServer8,
vRtrIfDHCPRelayTrusted,
vRtrIfDHCPAdminState,
vRtrIfDHCPDescription,
vRtrIfDHCPRelayRxPkts,
vRtrIfDHCPRelayTxPkts,
vRtrIfDHCPRelayRxMalformedPkts,
vRtrIfDHCPRelayRxUntrustedPkts,
vRtrIfDHCPRelayClientPktsDiscarded,
vRtrIfDHCPRelayClientPktsRelayed,
vRtrIfDHCPRelayServerPktsDiscarded,
vRtrIfDHCPRelayServerPktsRelayed,
vRtrIfDHCPRelayClientPktsSnooped,
vRtrIfDHCPRelayServerPktsSnooped,
vRtrIfDHCPLeasePopulate,
vRtrIfDHCPOperLeasePopulate,
vRtrIfDHCPGiAddressType,
vRtrIfDHCPGiAddress,
vRtrIfDHCPGiAddressAsSrc,
vRtrIfDHCPMatchOption82
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of virtual
interfaces on version 4.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 15 }
tmnxVRtrIpV4v0Group OBJECT-GROUP
OBJECTS { vRiaRowStatus,
vRiaIpAddress,
vRiaNetMask,
vRiaBcastAddrFormat,
vRiaReasmMaxSize,
vRiaIgpInhibit,
vRiaInetAddressType,
vRiaInetAddress,
vRiaInetPrefixLen,
vRiaInetAddrState,
vRiaInetEui64,
vRiaInetOperAddress,
vRtrIpCidrRouteLastEnabledTime,
vRtrIpCidrRoutePreference,
vRtrIpCidrRouteMetric,
vRtrStaticRouteDest,
vRtrStaticRouteMask,
vRtrStaticRouteIndex,
vRtrStaticRouteNumber,
vRtrStaticRouteRowStatus,
vRtrStaticRouteLastEnabledTime,
vRtrStaticRouteStatus,
vRtrStaticRouteStaticType,
vRtrStaticRoutePreference,
vRtrStaticRouteMetric,
vRtrStaticRouteEgressIfIndex,
vRtrStaticRouteNextHop,
vRtrStaticRouteNextHopUnnumberedIf,
vRtrStaticRouteAdminState,
vRtrStaticRouteIgpShortcut,
vRtrStaticRouteDisallowIgp,
vRtrStaticRouteTag,
vRtrStaticRouteIndexDest,
vRtrStaticRouteIndexMask,
vRtrStaticRouteAvailableIndex,
vRtrInetStaticRouteRowStatus,
vRtrInetStaticRouteLastEnabledTime,
vRtrInetStaticRouteStatus,
vRtrInetStaticRouteStaticType,
vRtrInetStaticRoutePreference,
vRtrInetStaticRouteMetric,
vRtrInetStaticRouteEgressIfIndex,
vRtrInetStaticRouteNextHopType,
vRtrInetStaticRouteNextHop,
vRtrInetStaticRouteNextHopIf,
vRtrInetStaticRouteAdminState,
vRtrInetStaticRouteIgpShortcut,
vRtrInetStaticRouteDisallowIgp,
vRtrInetStaticRouteTag,
vRtrInetStaticRouteEnableBfd,
vRtrInetStaticRouteAvailIndex,
vRtrSvcIpRangeRowStatus,
vRtrSvcIpRangeExclusive,
vRtrIpNetToMediaTimer,
vRtrIpNetToMediaOperState,
vRtrInstanceAggregationTableLastChanged,
vRtrAggregationRowStatus,
vRtrAggregationLastChanged,
vRtrAggregationSummaryOnly,
vRtrAggregationASSet,
vRtrAggregationAggregatorAS,
vRtrAggregationAggregatorIPAddr,
vRtrAggregationOperState,
vRtrTunnelMetric,
vRtrTunnelAge,
vRtrAdvPrefixOnLinkFlag,
vRtrAdvPrefixAutonomousFlag,
vRtrAdvPrefixPreferredLifetime,
vRtrAdvPrefixValidLifetime,
vRtrAdvPrefixRowStatus,
vRtrInetInstAggrTblLastChged,
vRtrInetAggrRowStatus,
vRtrInetAggrLastChanged,
vRtrInetAggrSummaryOnly,
vRtrInetAggrASSet,
vRtrInetAggrAggregatorAS,
vRtrInetAggrAggregatorIPAddr,
vRtrInetAggrOperState,
vRtrInetSvcIpRangeRowStatus,
-- ALCATEL CHANG
-- vRtrInetSvcIpRangeExclusive,
vRtrInetSvcIpRangeExclusive
-- ALCATEL CHANGE
-- ALCATEL CHANGE
-- vRtrIpNetToPhysicalTimer,
-- vRtrIpNetToPhysicalOperState,
-- vRtrIpNetToPhysicalIsRouter,
-- vRtrIpNetToPhysicalMTU,
-- vRtrIpNetToPhysicalPort,
-- vRtrIpNetToPhysicalEncap,
-- vRtrInetCidrRouteLastEnabledTime,
-- vRtrInetCidrRoutePreference,
-- vRtrInetCidrRouteMetric
-- ALCATEL CHANG
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of IP capabilities
for transport and virtual routers on version 4.0 Alcatel 7x50 SR
series systems."
::= { tmnxVRtrGroups 16 }
tmnxVRtrObsoletedObjectsV4v0Group OBJECT-GROUP
OBJECTS {
vRtrIfDHCPLseStateChAddr,
vRtrIfDHCPLseStateRemainLseTime,
vRtrIfDHCPLseStateOption82,
vRtrIfDHCPLseStatePersistKey,
vRtrDHCPClientLease,
vRtrDhcpLseStateOldCiAddr,
vRtrDhcpLseStateOldChAddr,
vRtrDhcpLseStateNewCiAddr,
vRtrDhcpLseStateNewChAddr,
vRtrDhcpRestoreLseStateCiAddr,
vRtrDhcpRestoreLseStateVRtrId,
vRtrDhcpRestoreLseStateIfIndex,
vRtrDhcpRestoreLseStateProblem,
vRtrDhcpLseStatePopulateError,
vRtrIfDHCPRelayInfoOption,
vRtrIfDHCPAutoFilter,
vRtrIfDHCPSnooping,
vRtrIfDHCPAutoFilterId,
vRtrIfDHCPOperAutoFilter,
vRtrAutoFilterDHCPClientAddress,
vRtrAutoFilterDHCPClientLease
}
STATUS current
DESCRIPTION
"The group of objects no longer supported in version 4.0
of Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 17 }
tmnxVRtrBfdV4v0Group OBJECT-GROUP
OBJECTS {
vRtrIfBfdAdminState,
vRtrIfBfdTransmitInterval,
vRtrIfBfdReceiveInterval,
vRtrIfBfdMultiplier,
vRtrIfBfdSessionOperState,
vRtrIfBfdSessionState,
vRtrIfBfdSessionOperFlags,
vRtrIfBfdSessionMesgRecv,
vRtrIfBfdSessionMesgSent,
vRtrIfBfdSessionLastDownTime,
vRtrIfBfdSessionLastUpTime,
vRtrIfBfdSessionUpCount,
vRtrIfBfdSessionDownCount,
vRtrIfBfdSessionLclDisc,
vRtrIfBfdSessionRemDisc,
vRtrIfBfdSessionProtocols,
vRtrIfBfdSessionTxInterval,
vRtrIfBfdSessionRxInterval
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting Bi-directional Forwarding
Detection on version 4.0 Alcatel 7x50 series systems."
::= { tmnxVRtrGroups 18 }
tmnxVRtrNotificationV4v0Group NOTIFICATION-GROUP
NOTIFICATIONS { tmnxVRtrMidRouteTCA,
tmnxVRtrHighRouteTCA,
tmnxVRtrHighRouteCleared,
tmnxVRtrIllegalLabelTCA,
tmnxVRtrMcastMidRouteTCA,
tmnxVRtrMcastMaxRoutesTCA,
tmnxVRtrMcastMaxRoutesCleared,
tmnxVRtrMaxArpEntriesTCA,
tmnxVRtrMaxArpEntriesCleared,
tmnxVRtrMaxRoutes,
tmnxVRtrDHCPSuspiciousPcktRcvd,
tmnxVRtrBfdSessionDown,
tmnxVRtrBfdMaxSessionOnSlot,
tmnxVRtrBfdPortTypeNotSupported
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the transport and
virtual router capabilities on version 4.0 Alcatel 7x50 SR series
systems."
::= { tmnxVRtrGroups 19 }
tmnxVRtrIPv6IfV4v0Group OBJECT-GROUP
OBJECTS { vRtrIfIPv6ConfigAllowed,
vRtrIfIPv6OperState,
vRtrIfIPv6IngressFilterId,
vRtrIfIPv6EgressFilterId,
vRtrIfIcmpV6Redirects,
vRtrIfIcmpV6NumRedirects,
vRtrIfIcmpV6RedirectsTime,
vRtrIfIcmpV6Unreachables,
vRtrIfIcmpV6NumUnreachables,
vRtrIfIcmpV6UnreachablesTime,
vRtrIfIcmpV6TimeExceeded,
vRtrIfIcmpV6NumTimeExceeded,
vRtrIfIcmpV6TimeExceededTime,
vRtrIfIcmpV6PktTooBig,
vRtrIfIcmpV6NumPktTooBig,
vRtrIfIcmpV6PktTooBigTime,
vRtrIfIcmpV6ParamProblem,
vRtrIfIcmpV6NumParamProblem,
vRtrIfIcmpV6ParamProblemTime,
vRtrIfLinkLocalAddressType,
vRtrIfLinkLocalAddressState,
vRtrIfLinkLocalAddress,
vRtrIfIcmp6InMsgs,
vRtrIfIcmp6InErrors,
vRtrIfIcmp6InDestUnreachs,
vRtrIfIcmp6InAdminProhibs,
vRtrIfIcmp6InTimeExcds,
vRtrIfIcmp6InParmProblems,
vRtrIfIcmp6InPktTooBigs,
vRtrIfIcmp6InEchos,
vRtrIfIcmp6InEchoReplies,
vRtrIfIcmp6InRtrSolicits,
vRtrIfIcmp6InRtrAdvertisements,
vRtrIfIcmp6InNbrSolicits,
vRtrIfIcmp6InNbrAdvertisements,
vRtrIfIcmp6InRedirects,
vRtrIfIcmp6InGrpMembQueries,
vRtrIfIcmp6InGrpMembResponses,
vRtrIfIcmp6InGrpMembReductions,
vRtrIfIcmp6OutMsgs,
vRtrIfIcmp6OutErrors,
vRtrIfIcmp6OutDestUnreachs,
vRtrIfIcmp6OutAdminProhibs,
vRtrIfIcmp6OutTimeExcds,
vRtrIfIcmp6OutParmProblems,
vRtrIfIcmp6OutPktTooBigs,
vRtrIfIcmp6OutEchos,
vRtrIfIcmp6OutEchoReplies,
vRtrIfIcmp6OutRtrSolicits,
vRtrIfIcmp6OutRtrSolicitsTime,
vRtrIfIcmp6OutRtrAdvertisements,
vRtrIfIcmp6OutRtrAdvTime,
vRtrIfIcmp6OutNbrSolicits,
vRtrIfIcmp6OutNbrSolicitsTime,
vRtrIfIcmp6OutNbrAdvertisements,
vRtrIfIcmp6OutNbrAdvTime,
vRtrIfIcmp6OutRedirects,
vRtrIfIcmp6OutGrpMembQueries,
vRtrIfIcmp6OutGrpMembResponses,
vRtrIfIcmp6OutGrpMembReductions,
vRtrIcmp6InMsgs,
vRtrIcmp6InErrors,
vRtrIcmp6InDestUnreachs,
vRtrIcmp6InAdminProhibs,
vRtrIcmp6InTimeExcds,
vRtrIcmp6InParmProblems,
vRtrIcmp6InPktTooBigs,
vRtrIcmp6InEchos,
vRtrIcmp6InEchoReplies,
vRtrIcmp6InRtrSolicits,
vRtrIcmp6InRtrAdvertisements,
vRtrIcmp6InNbrSolicits,
vRtrIcmp6InNbrAdvertisements,
vRtrIcmp6InRedirects,
vRtrIcmp6InGrpMembQueries,
vRtrIcmp6InGrpMembResponses,
vRtrIcmp6InGrpMembReductions,
vRtrIcmp6OutMsgs,
vRtrIcmp6OutErrors,
vRtrIcmp6OutDestUnreachs,
vRtrIcmp6OutAdminProhibs,
vRtrIcmp6OutTimeExcds,
vRtrIcmp6OutParmProblems,
vRtrIcmp6OutPktTooBigs,
vRtrIcmp6OutEchos,
vRtrIcmp6OutEchoReplies,
vRtrIcmp6OutRtrSolicits,
vRtrIcmp6OutRtrAdvertisements,
vRtrIcmp6OutNbrSolicits,
vRtrIcmp6OutNbrAdvertisements,
vRtrIcmp6OutRedirects,
vRtrIcmp6OutGrpMembQueries,
vRtrIcmp6OutGrpMembResponses,
vRtrIcmp6OutGrpMembReductions
}
STATUS current
DESCRIPTION
"The group of objects supporting management of IPv6 virtual
interfaces on version 4.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 20 }
tmnxVRtrIPv6V4v0Group OBJECT-GROUP
OBJECTS { vRtrV6DirectRoutes,
vRtrV6DirectActiveRoutes,
vRtrV6StaticRoutes,
vRtrV6StaticActiveRoutes,
vRtrV6OSPFRoutes,
vRtrV6OSPFActiveRoutes,
vRtrV6BGPRoutes,
vRtrV6BGPActiveRoutes,
vRtrV6ISISRoutes,
vRtrV6ISISActiveRoutes,
vRtrV6RIPRoutes,
vRtrV6RIPActiveRoutes,
vRtrV6AggregateRoutes,
vRtrV6AggregateActiveRoutes,
vRtrV6StatConfiguredIfs,
vRtrV6StatActiveIfs,
vRtrV6StatIllegalLabels,
vRtrV6StatCurrNumRoutes,
vRtrV6StatBGPVpnRoutes,
vRtrV6StatBGPVpnActiveRoutes,
vRtrV6StatTotalLdpTunnels,
vRtrV6StatTotalSdpTunnels,
vRtrV6StatActiveLdpTunnels,
vRtrV6StatActiveSdpTunnels,
vRtrV6MulticastRoutes,
vRtrV6StatActiveNbrEntries,
vRtrV6StatTotalNbrEntries
}
STATUS current
DESCRIPTION
"The group of objects supporting management of IPv6 transport and
virtual routers on version 4.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 21 }
tmnxVRtrIPv6IpV4v0Group OBJECT-GROUP
OBJECTS { vRtrAdvPrefixOnLinkFlag,
vRtrAdvPrefixAutonomousFlag,
vRtrAdvPrefixPreferredLifetime,
vRtrAdvPrefixValidLifetime,
vRtrAdvPrefixRowStatus
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of Ipv6 IP capabilities
for transport and virtual routers on version 4.0 Alcatel 7x50 SR
series systems."
::= { tmnxVRtrGroups 22 }
tmnxVRtrObsoleteNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { tmnxVRtrDHCPAFEntriesExceeded,
tmnxVRtrDHCPLseStsExceeded,
tmnxVRtrDHCPLeaseStateOverride,
tmnxVRtrDHCPLseStRestoreProblem,
tmnxVRtrDHCPLseStatePopulateErr
}
STATUS current
DESCRIPTION
"The group of obsolete notifications for the transport and
virtual router capabilities on Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 23 }
tmnxVRtrIPv6IpV5v0Group OBJECT-GROUP
OBJECTS { vRtrAdvPrefixOnLinkFlag,
vRtrAdvPrefixAutonomousFlag,
vRtrAdvPrefixPreferredLifetime,
vRtrAdvPrefixValidLifetime,
vRtrAdvPrefixRowStatus,
vRtrIfDHCP6TableLastChanged,
vRtrIfDHCP6LastChanged,
vRtrIfDHCP6AdminState,
vRtrIfDHCP6OperState,
vRtrIfDHCP6Description,
vRtrIfDHCP6RelayServer1,
vRtrIfDHCP6RelayServer2,
vRtrIfDHCP6RelayServer3,
vRtrIfDHCP6RelayServer4,
vRtrIfDHCP6RelayServer5,
vRtrIfDHCP6RelayServer6,
vRtrIfDHCP6RelayServer7,
vRtrIfDHCP6RelayServer8,
vRtrIfDHCP6RelayItfIdOption,
vRtrIfDHCP6LeasePopulate,
vRtrIfDHCP6CurrLeasePopulate,
vRtrIfDHCP6SourceAddress,
vRtrIfDHCP6EnableNgbrResolution,
vRtrIfDHCP6RemoteIdOption,
vRtrIfDHCP6PfxdAdminState,
vRtrIfDHCP6ServerMaxLeaseStates,
vRtrIfDHCP6CurrServerLeaseStates,
vRtrIfDHCP6ItfIdString,
vRtrIfProxyNDLocal,
vRtrIfProxyNDPolicy1,
vRtrIfProxyNDPolicy2,
vRtrIfProxyNDPolicy3,
vRtrIfProxyNDPolicy4,
vRtrIfProxyNDPolicy5,
vRtrIfDHCP6PfxdRowStatus,
vRtrIfDHCP6PfxdLastChanged,
vRtrIfDHCP6PfxdDUID,
vRtrIfDHCP6PfxdIAID,
vRtrIfDHCP6PfxdPrefLifetime,
vRtrIfDHCP6PfxdValidLifetime,
vRtrIfDHCP6PfxDelegationLstChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Ipv6 IP capabilities
for transport and virtual routers on version 5.0 Alcatel 7x50 SR
series systems."
::= { tmnxVRtrGroups 24 }
tmnxVRtrIfV5v0Group OBJECT-GROUP
OBJECTS { vRtrIfTotalNumber,
vRtrIfRowStatus,
vRtrIfType,
vRtrIfName,
vRtrIfPortID,
vRtrIfEncapValue,
vRtrIfAdminState,
vRtrIfOperState,
vRtrIfAlias,
vRtrIfPhysicalAddress,
vRtrIfArpTimeout,
vRtrIfIcmpMaskReply,
vRtrIfIcmpRedirects,
vRtrIfIcmpNumRedirects,
vRtrIfIcmpRedirectsTime,
vRtrIfIcmpUnreachables,
vRtrIfIcmpNumUnreachables,
vRtrIfIcmpUnreachablesTime,
vRtrIfIcmpTtlExpired,
vRtrIfIcmpNumTtlExpired,
vRtrIfIcmpTtlExpiredTime,
vRtrIfNtpBroadcast,
vRtrIfUnnumbered,
vRtrIfMtu,
vRtrIfQosPolicyId,
vRtrIfIngressFilterId,
vRtrIfEgressFilterId,
vRtrIfDirectedBroadcast,
vRtrIfMplsStatus,
vRtrIfUnnumberedIf,
vRtrIfCflowd,
vRtrIfVPNClass,
vRtrIfDescription,
vRtrIfProtocol,
vRtrIfTosMarkingTrusted,
vRtrIfServiceId,
vRtrIfArpPopulate,
vRtrIfLastOperStateChange,
vRtrIfOperMtu,
vRtrIfGlobalIndex,
vRtrIfProxyArp,
vRtrIfProxyArpLocal,
vRtrIfProxyArpPolicy1,
vRtrIfProxyArpPolicy2,
vRtrIfProxyArpPolicy3,
vRtrIfProxyArpPolicy4,
vRtrIfProxyArpPolicy5,
vRtrIfNameIndex,
vRtrIfDHCPRelayInfoAction,
vRtrIfDHCPRelayCircuitId,
vRtrIfDHCPRelayRemoteId,
vRtrIfDHCPRelayServer1,
vRtrIfDHCPRelayServer2,
vRtrIfDHCPRelayServer3,
vRtrIfDHCPRelayServer4,
vRtrIfDHCPRelayServer5,
vRtrIfDHCPRelayServer6,
vRtrIfDHCPRelayServer7,
vRtrIfDHCPRelayServer8,
vRtrIfDHCPRelayTrusted,
vRtrIfDHCPAdminState,
vRtrIfDHCPDescription,
vRtrIfDHCPRelayRxPkts,
vRtrIfDHCPRelayTxPkts,
vRtrIfDHCPRelayRxMalformedPkts,
vRtrIfDHCPRelayRxUntrustedPkts,
vRtrIfDHCPRelayClientPktsDiscarded,
vRtrIfDHCPRelayClientPktsRelayed,
vRtrIfDHCPRelayServerPktsDiscarded,
vRtrIfDHCPRelayServerPktsRelayed,
vRtrIfDHCPRelayClientPktsSnooped,
vRtrIfDHCPRelayServerPktsSnooped,
vRtrIfDHCPRelayClientPktsProxRad,
vRtrIfDHCPRelayClientPktsProxLS,
vRtrIfDHCPRelayPktsGenRelease,
vRtrIfDHCPRelayPktsGenForceRenew,
vRtrIfDHCPLeasePopulate,
vRtrIfDHCPOperLeasePopulate,
vRtrIfDHCPGiAddressType,
vRtrIfDHCPGiAddress,
vRtrIfDHCPGiAddressAsSrc,
vRtrIfDHCPMatchOption82,
vRtrIfDHCPRelayRemoteIdStr,
vRtrIfDHCPProxyAdminState,
vRtrIfDHCPProxyServerAddr,
vRtrIfDHCPProxyLeaseTime,
vRtrIfDHCPProxyLTRadiusOverride,
vRtrIfDHCPVendorIncludeOptions,
vRtrIfDHCPVendorOptionString,
vRtrIfGlobalIndexvRtrID,
vRtrIfGlobalIndexvRtrIfIndex,
vRtrIfDelaySeconds,
vRtrIfDelayUpTimer,
vRtrIfInitDelayEnable
}
STATUS current
DESCRIPTION
"The group of objects supporting management of virtual
interfaces on version 5.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 25 }
tmnxVRtrIpV5v0Group OBJECT-GROUP
OBJECTS { vRiaRowStatus,
vRiaIpAddress,
vRiaNetMask,
vRiaBcastAddrFormat,
vRiaReasmMaxSize,
vRiaIgpInhibit,
vRiaInetAddressType,
vRiaInetAddress,
vRiaInetPrefixLen,
vRiaInetAddrState,
vRiaInetEui64,
vRiaInetOperAddress,
vRiaInetGwAddressType,
vRiaInetGwAddress,
vRiaInetRemoteIpType,
vRiaInetRemoteIp,
vRtrIpCidrRouteLastEnabledTime,
vRtrIpCidrRoutePreference,
vRtrIpCidrRouteMetric,
vRtrStaticRouteDest,
vRtrStaticRouteMask,
vRtrStaticRouteIndex,
vRtrStaticRouteNumber,
vRtrStaticRouteRowStatus,
vRtrStaticRouteLastEnabledTime,
vRtrStaticRouteStatus,
vRtrStaticRouteStaticType,
vRtrStaticRoutePreference,
vRtrStaticRouteMetric,
vRtrStaticRouteEgressIfIndex,
vRtrStaticRouteNextHop,
vRtrStaticRouteNextHopUnnumberedIf,
vRtrStaticRouteAdminState,
vRtrStaticRouteIgpShortcut,
vRtrStaticRouteDisallowIgp,
vRtrStaticRouteTag,
vRtrStaticRouteIndexDest,
vRtrStaticRouteIndexMask,
vRtrStaticRouteAvailableIndex,
vRtrInetStaticRouteRowStatus,
vRtrInetStaticRouteLastEnabledTime,
vRtrInetStaticRouteStatus,
vRtrInetStaticRouteStaticType,
vRtrInetStaticRoutePreference,
vRtrInetStaticRouteMetric,
vRtrInetStaticRouteEgressIfIndex,
vRtrInetStaticRouteNextHopType,
vRtrInetStaticRouteNextHop,
vRtrInetStaticRouteNextHopIf,
vRtrInetStaticRouteAdminState,
vRtrInetStaticRouteIgpShortcut,
vRtrInetStaticRouteDisallowIgp,
vRtrInetStaticRouteTag,
vRtrInetStaticRouteEnableBfd,
vRtrInetStaticRouteAvailIndex,
vRtrSvcIpRangeRowStatus,
vRtrSvcIpRangeExclusive,
vRtrIpNetToMediaTimer,
vRtrIpNetToMediaOperState,
vRtrInstanceAggregationTableLastChanged,
vRtrAggregationRowStatus,
vRtrAggregationLastChanged,
vRtrAggregationSummaryOnly,
vRtrAggregationASSet,
vRtrAggregationAggregatorAS,
vRtrAggregationAggregatorIPAddr,
vRtrAggregationOperState,
vRtrTunnelMetric,
vRtrTunnelAge,
vRtrAdvPrefixOnLinkFlag,
vRtrAdvPrefixAutonomousFlag,
vRtrAdvPrefixPreferredLifetime,
vRtrAdvPrefixValidLifetime,
vRtrAdvPrefixRowStatus,
vRtrInetInstAggrTblLastChged,
vRtrInetAggrRowStatus,
vRtrInetAggrLastChanged,
vRtrInetAggrSummaryOnly,
vRtrInetAggrASSet,
vRtrInetAggrAggregatorAS,
vRtrInetAggrAggregatorIPAddr,
vRtrInetAggrOperState,
vRtrInetSvcIpRangeRowStatus,
-- ALCATEL CHANG
-- vRtrInetSvcIpRangeExclusive,
vRtrInetSvcIpRangeExclusive
-- ALCATEL CHANGE
-- ALCATEL CHANGE
-- vRtrIpNetToPhysicalTimer,
-- vRtrIpNetToPhysicalOperState,
-- vRtrIpNetToPhysicalIsRouter,
-- vRtrIpNetToPhysicalMTU,
-- vRtrIpNetToPhysicalPort,
-- vRtrIpNetToPhysicalEncap,
-- vRtrInetCidrRouteLastEnabledTime,
-- vRtrInetCidrRoutePreference,
-- vRtrInetCidrRouteMetric,
-- vRtrInetCidrRouteIfVRtrId
-- ALCATEL CHANG
}
STATUS current
DESCRIPTION
"The group of objects supporting management of IP capabilities
for transport and virtual routers on version 4.0 Alcatel 7x50 SR
series systems."
::= { tmnxVRtrGroups 26 }
tmnxVRtrV5v0Group OBJECT-GROUP
OBJECTS { vRtrRowStatus,
vRtrAdminState,
vRtrName,
vRtrMaxNumRoutes,
vRtrBgpStatus,
vRtrMplsStatus,
vRtrRipStatus,
vRtrRsvpStatus,
vRtrEcmpMaxRoutes,
vRtrAS,
vRtrNewIfIndex,
vRtrLdpStatus,
vRtrIsIsStatus,
vRtrRouterId,
vRtrTriggeredPolicy,
vRtrConfederationAS,
vRtrRouteDistinguisher,
vRtrMidRouteThreshold,
vRtrHighRouteThreshold,
vRtrIllegalLabelThreshold,
vRtrVpnId,
vRtrDescription,
vRtrGracefulRestart,
vRtrGracefulRestartType,
vRtrType,
vRtrServiceId,
vRtrCustId,
vRtrIgmpStatus,
vRtrMaxNumRoutesLogOnly,
vRtrVrfTarget,
vRtrVrfExportTarget,
vRtrVrfImportTarget,
vRtrPimStatus,
vRtrMaxMcastNumRoutes,
vRtrMaxMcastNumRoutesLogOnly,
vRtrMcastMidRouteThreshold,
vRtrIgnoreIcmpRedirect,
vRtrMsdpStatus,
vRtrVprnType,
vRtrSecondaryVrfId,
vRtrMldStatus,
vRtrImportPolicy1,
vRtrImportPolicy2,
vRtrImportPolicy3,
vRtrImportPolicy4,
vRtrImportPolicy5,
vRtrExportPolicy1,
vRtrExportPolicy2,
vRtrExportPolicy3,
vRtrExportPolicy4,
vRtrExportPolicy5,
vRtrOperState,
vRtrDirectRoutes,
vRtrDirectActiveRoutes,
vRtrStaticRoutes,
vRtrStaticActiveRoutes,
vRtrOSPFRoutes,
vRtrOSPFActiveRoutes,
vRtrBGPRoutes,
vRtrBGPActiveRoutes,
vRtrISISRoutes,
vRtrISISActiveRoutes,
vRtrRIPRoutes,
vRtrRIPActiveRoutes,
vRtrAggregateRoutes,
vRtrAggregateActiveRoutes,
vRtrStatConfiguredIfs,
vRtrStatActiveIfs,
vRtrStatIllegalLabels,
vRtrStatCurrNumRoutes,
vRtrStatBGPVpnRoutes,
vRtrStatBGPVpnActiveRoutes,
vRtrStatTotalLdpTunnels,
vRtrStatTotalSdpTunnels,
vRtrStatActiveLdpTunnels,
vRtrStatActiveSdpTunnels,
vRtrMulticastRoutes,
vRtrStatActiveARPEntries,
vRtrStatTotalARPEntries,
vRtrSubMgmtRoutes,
vRtrSubMgmtActiveRoutes,
vRtrStatTotalRsvpTunnels,
vRtrStatActiveRsvpTunnels,
vRtrV6StatTotalRsvpTunnels,
vRtrV6StatActiveRsvpTunnels,
vRtrDHCP6DropStatLastCleared,
vRtrDHCP6DropStatPktsDropped,
vRtrDHCP6MsgStatsLstClrd,
vRtrDHCP6MsgStatsRcvd,
vRtrDHCP6MsgStatsSent,
vRtrDHCP6MsgStatsDropped
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of transport and
virtual routers on version 5.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 27 }
tmnxVRtrNotificationV5v0Group NOTIFICATION-GROUP
NOTIFICATIONS { tmnxVRtrMidRouteTCA,
tmnxVRtrHighRouteTCA,
tmnxVRtrHighRouteCleared,
tmnxVRtrIllegalLabelTCA,
tmnxVRtrMcastMidRouteTCA,
tmnxVRtrMcastMaxRoutesTCA,
tmnxVRtrMcastMaxRoutesCleared,
tmnxVRtrMaxArpEntriesTCA,
tmnxVRtrMaxArpEntriesCleared,
tmnxVRtrMaxRoutes,
tmnxVRtrDHCPSuspiciousPcktRcvd,
tmnxVRtrBfdSessionDown,
tmnxVRtrBfdMaxSessionOnSlot,
tmnxVRtrBfdPortTypeNotSupported,
tmnxVRtrDHCPIfLseStatesExceeded,
tmnxVRtrDHCP6RelayLseStExceeded,
tmnxVRtrDHCP6ServerLseStExceeded,
tmnxVRtrDHCP6LseStateOverride,
tmnxVRtrDHCP6RelayReplyStripUni,
tmnxVRtrDHCP6IllegalClientAddr,
tmnxVRtrDHCP6AssignedIllegSubnet,
tmnxVRtrDHCP6ClientMacUnresolved,
tmnxVRtrBfdSessionUp
}
STATUS obsolete
DESCRIPTION
"The group of notifications supporting the transport and
virtual router capabilities on version 5.0 Alcatel 7xx0 SR series
systems."
::= { tmnxVRtrGroups 28 }
tmnxVRtrObsoleteV5v0Group OBJECT-GROUP
OBJECTS {
vRtrOspfStatus,
vRtrOspfv3Status,
vRtrIfChannelID
}
STATUS current
DESCRIPTION
"The group of objects in ALCATEL-IND1-TIMETRA-VRTR-MIB which are obsoleted in
Alcatel 7x50 SR 5.0 series systems."
::= { tmnxVRtrGroups 29 }
tmnxVRtrNotificationObjV5v0Group OBJECT-GROUP
OBJECTS {
vRtrID,
vRtrIfIndex,
vRtrDhcpPacketProblem,
vRtrBfdSlotNumber,
vRtrNumberOfBfdSessionsOnSlot,
vRtrBfdMaxSessionReason,
vRtrDHCP6ServerNetAddrType,
vRtrDHCP6ServerNetAddr,
vRtrDHCP6ClientNetAddrType,
vRtrDHCP6ClientNetAddr,
vRtrDHCP6AssignedNetAddrType,
vRtrDHCP6AssignedNetAddr,
vRtrDHCP6AssignedPrefixLen,
vRtrDHCP6OldAssignedNetAddrType,
vRtrDHCP6OldAssignedNetAddr,
vRtrDHCP6OldAssignedPrefixLen,
vRtrDHCP6NewClientId,
vRtrDHCP6OldClientId,
vRtrDHCP6LeaseOverrideResult
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of notification objects
on Alcatel 7x50 SR 5.0 series systems."
::= { tmnxVRtrGroups 30 }
tmnxVRtrIfDhcpServerGroup OBJECT-GROUP
OBJECTS {
vRtrIfLocalDhcpServerName
}
STATUS current
DESCRIPTION
"The group of objects supporting the DHCP server capabilities
on version 6.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 31 }
tmnxVRtrV6v0Group OBJECT-GROUP
OBJECTS { vRtrRowStatus,
vRtrAdminState,
vRtrName,
vRtrMaxNumRoutes,
vRtrBgpStatus,
vRtrMplsStatus,
vRtrRipStatus,
vRtrRsvpStatus,
vRtrEcmpMaxRoutes,
vRtrAS,
vRtrNewIfIndex,
vRtrLdpStatus,
vRtrIsIsStatus,
vRtrRouterId,
vRtrTriggeredPolicy,
vRtrConfederationAS,
vRtrRouteDistinguisher,
vRtrMidRouteThreshold,
vRtrHighRouteThreshold,
vRtrIllegalLabelThreshold,
vRtrVpnId,
vRtrDescription,
vRtrGracefulRestart,
vRtrGracefulRestartType,
vRtrType,
vRtrServiceId,
vRtrCustId,
vRtrIgmpStatus,
vRtrMaxNumRoutesLogOnly,
vRtrVrfTarget,
vRtrVrfExportTarget,
vRtrVrfImportTarget,
vRtrPimStatus,
vRtrMaxMcastNumRoutes,
vRtrMaxMcastNumRoutesLogOnly,
vRtrMcastMidRouteThreshold,
vRtrIgnoreIcmpRedirect,
vRtrMsdpStatus,
vRtrVprnType,
vRtrSecondaryVrfId,
vRtrMldStatus,
vRtrIPv6MaxNumRoutes,
vRtrIPv6MidRouteThreshold,
vRtrIPv6HighRouteThreshold,
vRtrIPv6MaxNumRoutesLogOnly,
vRtrIPv6IgnoreIcmpRedirect,
vRtrMcPathMgmtPlcyName,
vRtrImportPolicy1,
vRtrImportPolicy2,
vRtrImportPolicy3,
vRtrImportPolicy4,
vRtrImportPolicy5,
vRtrExportPolicy1,
vRtrExportPolicy2,
vRtrExportPolicy3,
vRtrExportPolicy4,
vRtrExportPolicy5,
vRtrOperState,
vRtrDirectRoutes,
vRtrDirectActiveRoutes,
vRtrStaticRoutes,
vRtrStaticActiveRoutes,
vRtrOSPFRoutes,
vRtrOSPFActiveRoutes,
vRtrBGPRoutes,
vRtrBGPActiveRoutes,
vRtrISISRoutes,
vRtrISISActiveRoutes,
vRtrRIPRoutes,
vRtrRIPActiveRoutes,
vRtrAggregateRoutes,
vRtrAggregateActiveRoutes,
vRtrStatConfiguredIfs,
vRtrStatActiveIfs,
vRtrStatIllegalLabels,
vRtrStatCurrNumRoutes,
vRtrStatBGPVpnRoutes,
vRtrStatBGPVpnActiveRoutes,
vRtrStatTotalLdpTunnels,
vRtrStatTotalSdpTunnels,
vRtrStatActiveLdpTunnels,
vRtrStatActiveSdpTunnels,
vRtrMulticastRoutes,
vRtrStatActiveARPEntries,
vRtrStatTotalARPEntries,
vRtrSubMgmtRoutes,
vRtrSubMgmtActiveRoutes,
vRtrStatTotalRsvpTunnels,
vRtrStatActiveRsvpTunnels,
vRtrV6StatTotalRsvpTunnels,
vRtrV6StatActiveRsvpTunnels,
vRtrHostRoutes,
vRtrHostActiveRoutes,
vRtrV6HostRoutes,
vRtrV6HostActiveRoutes,
vRtrStatLocalARPEntries,
vRtrStatStaticARPEntries,
vRtrStatDynamicARPEntries,
vRtrStatManagedARPEntries,
vRtrStatInternalARPEntries,
vRtrDHCP6DropStatLastCleared,
vRtrDHCP6DropStatPktsDropped,
vRtrDHCP6MsgStatsLstClrd,
vRtrDHCP6MsgStatsRcvd,
vRtrDHCP6MsgStatsSent,
vRtrDHCP6MsgStatsDropped,
vRtrManagedRoutes,
vRtrManagedActiveRoutes
}
STATUS current
DESCRIPTION
"The group of objects supporting management of transport and
virtual routers on version 6.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 32 }
tmnxVRtrStaticRteCPEChkV6v0Group OBJECT-GROUP
OBJECTS {
vRtrInetStaticRouteCpeAddrType,
vRtrInetStaticRouteCpeAddr,
vRtrInetStaticRouteCpeInterval,
vRtrInetStaticRouteCpeDropCnt,
vRtrInetStaticRouteCpeEnableLog,
vRtrInetStatRteCpeChkUpTime,
vRtrInetStatRteCpeChkInPktCnt,
vRtrInetStatRteCpeChkOutPktCnt,
vRtrInetStatRteCpeChkUpTrans,
vRtrInetStatRteCpeChkDownTrans,
vRtrInetStatRteCpeChkTTL
}
STATUS current
DESCRIPTION
"The group of objects supporting the Static Route CPE Check
capability on version 6.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 33 }
tmnxVRtrIfIpcpV6v0Group OBJECT-GROUP
OBJECTS {
vRtrIfIpcpPeerAddrType,
vRtrIfIpcpPeerAddr,
vRtrIfIpcpPriDnsAddrType,
vRtrIfIpcpPriDnsAddr,
vRtrIfIpcpSecDnsAddrType,
vRtrIfIpcpSecDnsAddr
}
STATUS current
DESCRIPTION
"The group of objects supporting management of IPCP
extensions for virtual interfaces on version 6.0 Alcatel
7x50 SR series systems"
::= { tmnxVRtrGroups 34 }
tmnxVRtrIfCpmProtectGroup OBJECT-GROUP
OBJECTS {
vRtrIfCpmProtPolicyId,
vRtrIfCpmProtUncfgdProtoDropCnt
}
STATUS current
DESCRIPTION
"The group of objects supporting management of CPM Protection
for virtual interfaces on Alcatel 7xxx series systems."
::= { tmnxVRtrGroups 35 }
tmnxDscpAppV6v0Group OBJECT-GROUP
OBJECTS {
tmnxDscpAppLastChanged,
tmnxDscpAppDscpValue,
tmnxDscpFCLastChanged,
tmnxDscpFCValue,
tmnxDscpAppTableLastChanged,
tmnxDscpFCTableLastChanged,
tmnxDot1pAppTableLastChanged,
tmnxDot1pAppLastChanged,
tmnxDot1pAppValue
}
STATUS current
DESCRIPTION
"The group of objects supporting management of DSCP marking for
self-generated protocol control traffic on Alcatel 7x50 SR series
systems release 6.0."
::= { tmnxVRtrGroups 36 }
tmnxVRtrIfDHCPRelayGroup OBJECT-GROUP
OBJECTS {
vRtrIfDHCPRelayInfoAction,
vRtrIfDHCPRelayCircuitId,
vRtrIfDHCPRelayRemoteId,
vRtrIfDHCPRelayServer1,
vRtrIfDHCPRelayServer2,
vRtrIfDHCPRelayServer3,
vRtrIfDHCPRelayServer4,
vRtrIfDHCPRelayServer5,
vRtrIfDHCPRelayServer6,
vRtrIfDHCPRelayServer7,
vRtrIfDHCPRelayServer8,
vRtrIfDHCPRelayTrusted,
vRtrIfDHCPAdminState,
vRtrIfDHCPDescription,
vRtrIfDHCPRelayRxPkts,
vRtrIfDHCPRelayTxPkts,
vRtrIfDHCPRelayRxMalformedPkts,
vRtrIfDHCPRelayRxUntrustedPkts,
vRtrIfDHCPRelayClientPktsDiscarded,
vRtrIfDHCPRelayClientPktsRelayed,
vRtrIfDHCPRelayServerPktsDiscarded,
vRtrIfDHCPRelayServerPktsRelayed,
vRtrIfDHCPRelayClientPktsSnooped,
vRtrIfDHCPRelayServerPktsSnooped,
vRtrIfDHCPRelayClientPktsProxRad,
vRtrIfDHCPRelayClientPktsProxLS,
vRtrIfDHCPRelayPktsGenRelease,
vRtrIfDHCPRelayPktsGenForceRenew,
vRtrIfDHCPLeasePopulate,
vRtrIfDHCPOperLeasePopulate,
vRtrIfDHCPGiAddressType,
vRtrIfDHCPGiAddress,
vRtrIfDHCPGiAddressAsSrc,
vRtrIfDHCPMatchOption82,
vRtrIfDHCPRelayRemoteIdStr,
vRtrIfDHCPProxyAdminState,
vRtrIfDHCPProxyServerAddr,
vRtrIfDHCPProxyLeaseTime,
vRtrIfDHCPProxyLTRadiusOverride,
vRtrIfDHCPVendorIncludeOptions,
vRtrIfDHCPVendorOptionString,
vRtrIfDHCPLayer2Header,
vRtrIfDHCPAntiSpoofMacAddr,
vRtrIfDHCPClientApplications,
vRtrIfLdpSyncTimer
}
STATUS current
DESCRIPTION
"The group of objects supporting management of DHCP Relay
on virtual interfaces on version 6.0 Alcatel 7x50 SR series systems"
::= { tmnxVRtrGroups 37 }
tmnxVRtrGlobalV6v0Group OBJECT-GROUP
OBJECTS {
vRtrNextVRtrID,
vRtrConfiguredVRtrs,
vRtrActiveVRtrs,
vRtrRouteThresholdSoakTime,
vRtrMaxARPEntries,
vRtrIPv6RouteThresholdSoakTime
}
STATUS current
DESCRIPTION
"The group of objects supporting management of general
capabilities for transport and virtual routers
on version 6.0 Alcatel 7x50 SR series systems."
::= { tmnxVRtrGroups 38 }
tmnxVRtrNotificationObjV6v0Group OBJECT-GROUP
OBJECTS {
vRtrID,
vRtrIfIndex,
vRtrDhcpPacketProblem,
vRtrBfdSlotNumber,
vRtrNumberOfBfdSessionsOnSlot,
vRtrBfdMaxSessionReason,
vRtrDHCP6ServerNetAddrType,
vRtrDHCP6ServerNetAddr,
vRtrDHCP6ClientNetAddrType,
vRtrDHCP6ClientNetAddr,
vRtrDHCP6AssignedNetAddrType,
vRtrDHCP6AssignedNetAddr,
vRtrDHCP6AssignedPrefixLen,
vRtrDHCP6OldAssignedNetAddrType,
vRtrDHCP6OldAssignedNetAddr,
vRtrDHCP6OldAssignedPrefixLen,
vRtrDHCP6NewClientId,
vRtrDHCP6OldClientId,
vRtrDHCP6LeaseOverrideResult,
vRtrInetStatRteCpeNotifyAddrType,
vRtrInetStatRteCpeNotifyAddr,
vRtrInetStaticRouteCpeStatus,
vRtrManagedRouteInetAddrType,
vRtrManagedRouteInetAddr,
vRtrManagedRoutePrefixLen,
vRtrFailureDescription
}
STATUS current
DESCRIPTION
"The group of objects supporting management of notification objects
on Alcatel 7x50 SR 6.0 series systems."
::= { tmnxVRtrGroups 39 }
tmnxVRtrNotificationV6v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxVRtrMidRouteTCA,
tmnxVRtrHighRouteTCA,
tmnxVRtrHighRouteCleared,
tmnxVRtrIllegalLabelTCA,
tmnxVRtrMcastMidRouteTCA,
tmnxVRtrMcastMaxRoutesTCA,
tmnxVRtrMcastMaxRoutesCleared,
tmnxVRtrMaxArpEntriesTCA,
tmnxVRtrMaxArpEntriesCleared,
tmnxVRtrMaxRoutes,
tmnxVRtrDHCPSuspiciousPcktRcvd,
tmnxVRtrBfdSessionDown,
tmnxVRtrBfdMaxSessionOnSlot,
tmnxVRtrBfdPortTypeNotSupported,
tmnxVRtrDHCPIfLseStatesExceeded,
tmnxVRtrDHCP6RelayLseStExceeded,
tmnxVRtrDHCP6ServerLseStExceeded,
tmnxVRtrDHCP6LseStateOverride,
tmnxVRtrDHCP6RelayReplyStripUni,
tmnxVRtrDHCP6IllegalClientAddr,
tmnxVRtrDHCP6AssignedIllegSubnet,
tmnxVRtrDHCP6ClientMacUnresolved,
tmnxVRtrBfdSessionUp,
tmnxVRtrIPv6MidRouteTCA,
tmnxVRtrIPv6HighRouteTCA,
tmnxVRtrIPv6HighRouteCleared,
tmnxVRtrStaticRouteCPEStatus,
tmnxVRtrBfdSessionDeleted,
tmnxVRtrBfdSessionProtChange,
tmnxVRtrManagedRouteAddFailed
}
STATUS current
DESCRIPTION
"The group of notifications supporting the transport and
virtual router capabilities on version 6.0 Alcatel 7xx0 SR series
systems."
::= { tmnxVRtrGroups 40 }
tmnxVRtrBfdV6v0Group OBJECT-GROUP
OBJECTS {
vRtrIfBfdAdminState,
vRtrIfBfdTransmitInterval,
vRtrIfBfdReceiveInterval,
vRtrIfBfdMultiplier,
vRtrIfBfdSessionOperState,
vRtrIfBfdSessionState,
vRtrIfBfdSessionOperFlags,
vRtrIfBfdSessionMesgRecv,
vRtrIfBfdSessionMesgSent,
vRtrIfBfdSessionLastDownTime,
vRtrIfBfdSessionLastUpTime,
vRtrIfBfdSessionUpCount,
vRtrIfBfdSessionDownCount,
vRtrIfBfdSessionLclDisc,
vRtrIfBfdSessionRemDisc,
vRtrIfBfdSessionProtocols,
vRtrIfBfdSessionTxInterval,
vRtrIfBfdSessionRxInterval,
vRtrIfBfdEchoInterval,
vRtrIfBfdSessionType
}
STATUS current
DESCRIPTION
"The group of objects supporting Bi-directional Forwarding
Detection on version 6.0 Alcatel 7xxx series systems."
::= { tmnxVRtrGroups 41 }
END