mibs/MIBS/quanta/fastpathroutepolicy.my

369 lines
14 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
NETGEAR-ROUTE-POLICY-MIB DEFINITIONS ::= BEGIN
-- Netgear Inc Route-Map MIB
-- Copyright Netgear Inc (200x-2012) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC
DisplayString FROM RFC1213-MIB
ifIndex, InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
fastPathRouting FROM NETGEAR-ROUTING-MIB;
fastPathRoutePolicy MODULE-IDENTITY
LAST-UPDATED "201210010000Z" -- 01 0ctober 2012 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"The MIB definitions for Route Policy system."
::= { fastPathRouting 20 }
-- Textual Convention
FastpathRoutePolicyAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Determines whether a Route Map statement
should be permitted or denied."
SYNTAX INTEGER {
permit(1),
deny(2)
}
FastpathRoutePolicyStmtIpPrecedence ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values of IP precedence that can be
configured in a route-map statement."
SYNTAX INTEGER {
routine(0),
priority(1),
immediate(2),
flash(3),
flash-override(4),
critical(5),
internet(6),
network(7),
invalid(8)
}
-- fastpath route policy name table. We create a Route-map statement through this table.
fastpathRoutePolicyNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF FastpathRoutePolicyNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to configure or fetch current list of route-map statements"
::= { fastPathRoutePolicy 1}
fastpathRoutePolicyNameEntry OBJECT-TYPE
SYNTAX FastpathRoutePolicyNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table corresponds to a route-map statement"
INDEX {fastpathRoutePolicyName,fastpathRoutePolicyStmtActionType,fastpathRoutePolicySequence}
::= { fastpathRoutePolicyNameTable 1 }
FastpathRoutePolicyNameEntry::= SEQUENCE {
fastpathRoutePolicyName DisplayString,
fastpathRoutePolicyStmtActionType FastpathRoutePolicyAction,
fastpathRoutePolicySequence Unsigned32,
fastpathRoutePolicyNameRowStatus RowStatus
}
fastpathRoutePolicyName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a Route Map statement."
::= { fastpathRoutePolicyNameEntry 1 }
fastpathRoutePolicyStmtActionType OBJECT-TYPE
SYNTAX FastpathRoutePolicyAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action associated with this route-map statement.
This can be either Permit/Deny "
::= { fastpathRoutePolicyNameEntry 2 }
fastpathRoutePolicySequence OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number."
::= { fastpathRoutePolicyNameEntry 3 }
fastpathRoutePolicyNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { fastpathRoutePolicyNameEntry 4 }
--*********************************************************************
--route-map statement table to configure 'match' or 'set' terms
--*********************************************************************
fastpathRoutePolicyStamentTable OBJECT-TYPE
SYNTAX SEQUENCE OF FastpathRoutePolicyStatementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to configure match or set statements in a route-map statement."
::= { fastPathRoutePolicy 2 }
fastpathRoutePolicyStatementEntry OBJECT-TYPE
SYNTAX FastpathRoutePolicyStatementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry describes match and set terms in a route-map statement if configured"
INDEX {fastpathRoutePolicyStmtName,fastpathRoutePolicyStmtSeqNum,fastpathRoutePolicyStmtAction}
::= { fastpathRoutePolicyStamentTable 1 }
FastpathRoutePolicyStatementEntry::= SEQUENCE {
fastpathRoutePolicyStmtName DisplayString,
fastpathRoutePolicyStmtSeqNum Unsigned32,
fastpathRoutePolicyStmtAction FastpathRoutePolicyAction,
fastpathRoutePolicyStmtMatchIpv4AclList DisplayString,
fastpathRoutePolicyStmtMatchIpv4AclDelList DisplayString,
fastpathRoutePolicyStmtMatchMacAclList DisplayString,
fastpathRoutePolicyStmtMatchMacAclDelList DisplayString,
fastpathRoutePolicyStmtMatchPacketLengthRangeMin Unsigned32,
fastpathRoutePolicyStmtMatchPacketLengthRangeMax Unsigned32,
fastpathRoutePolicyStmtSetIpNextHopList DisplayString,
fastpathRoutePolicyStmtSetIpNextHopDelList DisplayString,
fastpathRoutePolicyStmtSetDefaultIpNextHopList DisplayString,
fastpathRoutePolicyStmtSetDefaultIpNextHopDelList DisplayString,
fastpathRoutePolicyStmtSetIpPrecedence FastpathRoutePolicyStmtIpPrecedence,
fastpathRoutePolicyStmtSetIntfNull0 TruthValue
}
fastpathRoutePolicyStmtName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a Route Map."
::= { fastpathRoutePolicyStatementEntry 1 }
fastpathRoutePolicyStmtSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number."
::= { fastpathRoutePolicyStatementEntry 2 }
fastpathRoutePolicyStmtAction OBJECT-TYPE
SYNTAX FastpathRoutePolicyAction
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The action associated with this route-map statement.
This can be either Permit/Deny "
::= { fastpathRoutePolicyStatementEntry 3 }
fastpathRoutePolicyStmtMatchIpv4AclList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included. "
::= { fastpathRoutePolicyStatementEntry 4 }
fastpathRoutePolicyStmtMatchIpv4AclDelList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of IPv4 ACLs. This
list contains either IPV4 standard ACL/IPV4 extended
ACL/ named IPv4 ACL. In a single match statement,
up to a maximum of 16 IPV4 ACLs can be included.This
list is used to delete already configured match list
of IPv4 ACLs in route-map statement.Earlier this list
should have configured through MIB object
fastpathRoutePolicyStmtMatchIpv4AclList "
::= { fastpathRoutePolicyStatementEntry 5 }
fastpathRoutePolicyStmtMatchMacAclList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement. "
::= { fastpathRoutePolicyStatementEntry 6 }
fastpathRoutePolicyStmtMatchMacAclDelList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of MAC ACLs. This
list contains upto 16 MAC ACL names that can be
included in a match statement. This MIB object is
used to delete MAC ACL lists matched in a route-map
statement via fastpathRoutePolicyStmtMatchMacAclList. "
::= { fastpathRoutePolicyStatementEntry 7 }
fastpathRoutePolicyStmtMatchPacketLengthRangeMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum value in the packet length range in a match
length term. A value of zero is used to disable/remove
minimum length configuration. "
::= { fastpathRoutePolicyStatementEntry 8}
fastpathRoutePolicyStmtMatchPacketLengthRangeMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum value in the packet length range in a match
length term. A value of zero is used to disable/remove
maximum length configuration. "
::= { fastpathRoutePolicyStatementEntry 9 }
fastpathRoutePolicyStmtSetIpNextHopList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified "
::= { fastpathRoutePolicyStatementEntry 10 }
fastpathRoutePolicyStmtSetIpNextHopDelList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This
MIB object is used to delete IP next-hop list configured
via fastpathRoutePolicyStmtSetIpNextHopList "
::= { fastpathRoutePolicyStatementEntry 11 }
fastpathRoutePolicyStmtSetDefaultIpNextHopList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified "
::= { fastpathRoutePolicyStatementEntry 12 }
fastpathRoutePolicyStmtSetDefaultIpNextHopDelList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string containing a list of default next-hop IP addresses.
Upto a maximum of 16 IP addresses can be specified.This MIB
object is used to delete IP default next-hop list configured
via fastpathRoutePolicyStmtSetDefaultIpNextHopList "
::= { fastpathRoutePolicyStatementEntry 13 }
fastpathRoutePolicyStmtSetIpPrecedence OBJECT-TYPE
SYNTAX FastpathRoutePolicyStmtIpPrecedence
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Precedence value to be remarked. This is specified through
set clause in route-map statement. In order to remove configured precedence value,
use invalid(8) option. "
::= { fastpathRoutePolicyStatementEntry 14 }
fastpathRoutePolicyStmtSetIntfNull0 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifying null0 as an interface in a route-map
statement"
::= { fastpathRoutePolicyStatementEntry 15 }
--******************************************************************************
--Applying Route Maps to interface
--*******************************************************************************
fastpathRoutePolicyIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FastpathRoutePolicyIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interfaces on which route-map is applied."
::= { fastPathRoutePolicy 3 }
fastpathRoutePolicyIfEntry OBJECT-TYPE
SYNTAX FastpathRoutePolicyIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { fastpathRoutePolicyIfIndex,fastpathRoutePolicyIfName}
::= { fastpathRoutePolicyIfTable 1 }
FastpathRoutePolicyIfEntry::= SEQUENCE {
fastpathRoutePolicyIfIndex InterfaceIndex,
fastpathRoutePolicyIfName DisplayString,
fastpathRoutePolicyIfRowStatus RowStatus
}
fastpathRoutePolicyIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface to which route-map needs to be applied or Interface from which route-map needs to be removed."
::= { fastpathRoutePolicyIfEntry 1 }
fastpathRoutePolicyIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a Route Map."
::= { fastpathRoutePolicyIfEntry 2 }
fastpathRoutePolicyIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { fastpathRoutePolicyIfEntry 3 }
END