david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/quanta/fastpathrouting6.my

1717 lines
63 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
NETGEAR-ROUTING6-MIB DEFINITIONS ::= BEGIN
-- Netgear Routing MIB
-- Copyright Netgear Inc (2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Unsigned32, Integer32,
Gauge32 FROM SNMPv2-SMI
DisplayString, PhysAddress, TruthValue, TimeStamp,
VariablePointer, RowPointer, RowStatus, MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix,
Ipv6AddressIfIdentifier,
Ipv6IfIndexOrZero FROM IPV6-TC
lb6m FROM QUANTA-LB6M-REF-MIB;
fastPathRoutingIpv6 MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"The Netgear Private MIB for FastPath Ipv6 Routing"
-- Revision history.
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
REVISION
"200509211700Z" -- 21 Sept 2005 12:00 PM EST
DESCRIPTION
"Updated for release"
::= { lb6m 30 }
--**************************************************************************************
-- agentIpv6Group
--
--**************************************************************************************
agentIpv6Group OBJECT IDENTIFIER ::= { fastPathRoutingIpv6 1 }
agentIpv6RoutingMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables ipv6 unicast routing on the switch."
::= { agentIpv6Group 1 }
--**************************************************************************************
-- agentIpv6InterfaceTable
--
--**************************************************************************************
agentIpv6InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { agentIpv6Group 2 }
agentIpv6InterfaceEntry OBJECT-TYPE
SYNTAX AgentIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentIpv6InterfaceIfIndex }
::= { agentIpv6InterfaceTable 1 }
AgentIpv6InterfaceEntry ::= SEQUENCE {
agentIpv6InterfaceIfIndex
Integer32,
agentIpv6InterfaceMtuValue
Unsigned32,
agentIpv6InterfaceDadTransmits
Integer32,
agentIpv6InterfaceLinkLocalOnly
INTEGER,
agentIpv6InterfaceIcmpUnreachables
INTEGER,
agentIpv6InterfaceAutoconfig
INTEGER,
agentIpv6InterfaceDhcpClient
INTEGER,
agentIpv6InterfaceIcmpRedirects
INTEGER
}
agentIpv6InterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex associated with this instance."
::= { agentIpv6InterfaceEntry 1 }
agentIpv6InterfaceMtuValue OBJECT-TYPE
SYNTAX Unsigned32 (0|1280..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the MTU value for this interface.If it is not yet configured,
retrieving the value of this object results in a zero value.
Setting the value zero to this object effectively un-configures the MTU."
::= { agentIpv6InterfaceEntry 2 }
agentIpv6InterfaceDadTransmits OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the dad transmits value for this interface."
::= { agentIpv6InterfaceEntry 3 }
agentIpv6InterfaceLinkLocalOnly OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, interface is capable of ipv6 operation without a global address.
In this case, an eui-64 based link-local address is used. "
DEFVAL { disable }
::= { agentIpv6InterfaceEntry 4 }
agentIpv6InterfaceIcmpUnreachables OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is enable, it indicates that ICMPv6 unreachables can be sent on this
interface."
::= { agentIpv6InterfaceEntry 5 }
agentIpv6InterfaceAutoconfig OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is enabled, it indicates that the IPv6 address
is automatically generated using IPv6 stateless address auto configuration."
::= { agentIpv6InterfaceEntry 6 }
agentIpv6InterfaceDhcpClient OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is enabled, the interface uses DHCPv6 Client
protocol to acquire an IPv6 address."
::= { agentIpv6InterfaceEntry 7 }
agentIpv6InterfaceIcmpRedirects OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the sending of ICMPv6 redirect messages
in the redirect scenario where the forwarded packet
is sent out through the same interface on which the
packet was received. "
DEFVAL { enable }
::= { agentIpv6InterfaceEntry 8 }
--**************************************************************************************
-- agentIpv6RouterAdvertisementTable
--
--**************************************************************************************
agentIpv6RouterAdvertisementTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6RouterAdvertisementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is no global administrative flag for router advertisement. The global
routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing
is disabled, router advertisement is disabled as well."
::= { agentIpv6Group 3 }
agentIpv6RouterAdvertisementEntry OBJECT-TYPE
SYNTAX AgentIpv6RouterAdvertisementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentIpv6RouterAdvertisementIfIndex }
::= { agentIpv6RouterAdvertisementTable 1 }
AgentIpv6RouterAdvertisementEntry ::= SEQUENCE {
agentIpv6RouterAdvertisementIfIndex
Integer32,
agentIpv6RouterAdvertisementSuppressMode
INTEGER,
agentIpv6RouterAdvertisementMaxAdvertisementInterval
Integer32,
agentIpv6RouterAdvertisementAdvertisementLifetime
Integer32,
agentIpv6RouterAdvertisementNbrSolicitInterval
Integer32,
agentIpv6RouterAdvertisementReachableTime
Integer32,
agentIpv6RouterAdvertisementManagedFlag
INTEGER,
agentIpv6RouterAdvertisementOtherFlag
INTEGER,
agentIpv6RouterAdvertisementHopLimitUnspecifiedMode
INTEGER
}
agentIpv6RouterAdvertisementIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Number to configure Router Advertisement on."
::= { agentIpv6RouterAdvertisementEntry 1 }
agentIpv6RouterAdvertisementSuppressMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable router advertisement suppression on the interface."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 2 }
agentIpv6RouterAdvertisementMaxAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (4..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time allowed between sending router advertisements
from the interface."
DEFVAL { 600 }
::= { agentIpv6RouterAdvertisementEntry 3 }
agentIpv6RouterAdvertisementAdvertisementLifetime OBJECT-TYPE
SYNTAX Integer32 (4..65520)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of lifetime field of router advertisement sent from
the interface.
This value must be greater than or equal to
agentIpv6RouterAdvertisementMaxAdvertisementInterval."
DEFVAL { 1800 }
::= { agentIpv6RouterAdvertisementEntry 4 }
agentIpv6RouterAdvertisementNbrSolicitInterval OBJECT-TYPE
SYNTAX Integer32 (0..3600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of retrans time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval."
DEFVAL { 0 }
::= { agentIpv6RouterAdvertisementEntry 5 }
agentIpv6RouterAdvertisementReachableTime OBJECT-TYPE
SYNTAX Integer32 (0..3600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of reachable time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval."
DEFVAL { 0 }
::= { agentIpv6RouterAdvertisementEntry 6 }
agentIpv6RouterAdvertisementManagedFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of managed config field of router advertisement sent from
the interface."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 7 }
agentIpv6RouterAdvertisementOtherFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of other config field of router advertisement sent from
the interface."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 8 }
agentIpv6RouterAdvertisementHopLimitUnspecifiedMode OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the router to send Router Advertisements
on an interface with unspecified (0) Current Hop Limit value.
This will tell the hosts on that link to ignore the Hop Limit
from this Router."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 9 }
-- Address Prefix table
-- The IPv6 Address Prefix table contains information on
-- the entity's IPv6 Address Prefixes that are associated
-- with IPv6 interfaces.
agentIpv6AddrPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6AddrPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of IPv6 address prefixes of
IPv6 interfaces."
::= { agentIpv6Group 4 }
agentIpv6AddrPrefixEntry OBJECT-TYPE
SYNTAX AgentIpv6AddrPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An interface entry containing objects of
a particular IPv6 address prefix."
INDEX { agentIpv6InterfaceIfIndex,
agentIpv6AddrPrefix,
agentIpv6AddrPrefixLength }
::= { agentIpv6AddrPrefixTable 1 }
AgentIpv6AddrPrefixEntry ::= SEQUENCE {
agentIpv6AddrPrefix Ipv6AddressPrefix,
agentIpv6AddrPrefixLength INTEGER,
agentIpv6AddrPrefixOnLinkFlag TruthValue,
agentIpv6AddrPrefixAutonomousFlag TruthValue,
agentIpv6AddrPrefixAdvPreferredLifetime Unsigned32,
agentIpv6AddrPrefixAdvValidLifetime Unsigned32
}
agentIpv6AddrPrefix OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix associated with the this interface."
::= { agentIpv6AddrPrefixEntry 1 }
agentIpv6AddrPrefixLength OBJECT-TYPE
SYNTAX INTEGER (0..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits)."
::= { agentIpv6AddrPrefixEntry 2 }
agentIpv6AddrPrefixOnLinkFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise."
::= { agentIpv6AddrPrefixEntry 3 }
agentIpv6AddrPrefixAutonomousFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Autonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface address).
If false(2), it is not used to autoconfigure
a local interface address."
::= { agentIpv6AddrPrefixEntry 4 }
agentIpv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.
The address generated from a deprecated prefix
should no longer be used as a source address in
new communications, but packets received on such
an interface are processed as expected."
::= { agentIpv6AddrPrefixEntry 5 }
agentIpv6AddrPrefixAdvValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.
The address generated from an invalidated prefix
should not appear as the destination or source
address of a packet."
::= { agentIpv6AddrPrefixEntry 6 }
-- the IPv6 Address table
-- The IPv6 address table contains this node's IPv6
-- addressing information.
agentIpv6AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant to
this node's interface addresses."
::= { agentIpv6Group 5 }
agentIpv6AddrEntry OBJECT-TYPE
SYNTAX AgentIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this
node's interface addresses."
INDEX { agentIpv6InterfaceIfIndex, agentIpv6AddrAddress }
::= { agentIpv6AddrTable 1 }
AgentIpv6AddrEntry ::=
SEQUENCE {
agentIpv6AddrAddress Ipv6Address,
agentIpv6AddrPfxLength INTEGER,
agentIpv6AddrEui64Flag TruthValue,
agentIpv6AddrStatus RowStatus
}
agentIpv6AddrAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address to which this entry's addressing
information pertains."
::= { agentIpv6AddrEntry 1 }
agentIpv6AddrPfxLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the prefix (in bits) associated with
the IPv6 address of this entry."
::= { agentIpv6AddrEntry 2 }
agentIpv6AddrEui64Flag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this
address uses and eui-64 generated interface identifier and the value
'false(2)' otherwise."
::= { agentIpv6AddrEntry 3 }
agentIpv6AddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentIpv6NetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface."
::= { agentIpv6AddrEntry 4 }
-- IPv6 Static Routing table
agentIpv6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Static Routing table. This table contains
an entry for each valid IPv6 static unicast route
that can be used for packet forwarding
determination."
::= { agentIpv6Group 6 }
agentIpv6StaticRouteEntry OBJECT-TYPE
SYNTAX AgentIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A routing entry."
INDEX { agentIpv6StaticRouteDest,
agentIpv6StaticRoutePfxLength,
agentIpv6StaticRouteIfIndex,
agentIpv6StaticRouteNextHop }
::= { agentIpv6StaticRouteTable 1 }
AgentIpv6StaticRouteEntry ::= SEQUENCE {
agentIpv6StaticRouteDest Ipv6AddressPrefix,
agentIpv6StaticRoutePfxLength INTEGER,
agentIpv6StaticRouteIfIndex Ipv6IfIndexOrZero,
agentIpv6StaticRouteNextHop Ipv6Address,
agentIpv6StaticRoutePreference INTEGER,
agentIpv6StaticRouteStatus RowStatus
}
agentIpv6StaticRouteDest OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route.
This object may not take a Multicast address
value."
::= { agentIpv6StaticRouteEntry 1 }
agentIpv6StaticRoutePfxLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { agentIpv6StaticRouteEntry 2 }
agentIpv6StaticRouteIfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ipv6IfIndex. For routes with global address next hop this
value can be zero."
::= { agentIpv6StaticRouteEntry 3 }
agentIpv6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next
system en route. "
::= { agentIpv6StaticRouteEntry 4 }
agentIpv6StaticRoutePreference OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing preference metric for this route. A lower
value is more preferred."
DEFVAL { 1 }
::= { agentIpv6StaticRouteEntry 5 }
agentIpv6StaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table.
destroy(6) - Removes the associated route from the interface."
::= { agentIpv6StaticRouteEntry 6 }
--**************************************************************************************
-- agentIpv6ServicePortGroup
--
--**************************************************************************************
agentIpv6ServicePortGroup OBJECT IDENTIFIER ::= { agentIpv6Group 7 }
-- IPv6 Service Port Prefix Table
agentIpv6ServicePortPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Service Port Prefix Table. This table contains
an entry for each valid IPv6 prefix configured on the
Service Port."
::= { agentIpv6ServicePortGroup 1 }
agentIpv6ServicePortPrefixEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Service Port Prefix entry."
INDEX { agentIpv6ServicePortPrefixIndex }
::= { agentIpv6ServicePortPrefixTable 1 }
AgentIpv6ServicePortPrefixEntry ::= SEQUENCE {
agentIpv6ServicePortPrefixIndex Unsigned32,
agentIpv6ServicePortPrefix Ipv6Address,
agentIpv6ServicePortPrefixLength Unsigned32
}
agentIpv6ServicePortPrefixIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Ipv6 Prefix Address configured on the
Service Port. Removal of a row will cause index values
to be reassigned."
::= { agentIpv6ServicePortPrefixEntry 1 }
agentIpv6ServicePortPrefix OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ipv6 Prefix Address configured on the Service Port."
::= { agentIpv6ServicePortPrefixEntry 2 }
agentIpv6ServicePortPrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the IPv6 Prefix Address."
::= { agentIpv6ServicePortPrefixEntry 3 }
-- IPv6 Service Port Default Router Table
agentIpv6ServicePortDefaultRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortDefaultRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Service Port Default Router Table. This table contains
an entry for each valid IPv6 Default Router configured on the
Service Port."
::= { agentIpv6ServicePortGroup 2 }
agentIpv6ServicePortDefaultRouterEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortDefaultRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Service Port Default Router entry."
INDEX { agentIpv6ServicePortDefaultRouterIndex }
::= { agentIpv6ServicePortDefaultRouterTable 1 }
AgentIpv6ServicePortDefaultRouterEntry ::= SEQUENCE {
agentIpv6ServicePortDefaultRouterIndex Unsigned32,
agentIpv6ServicePortDefaultRouter Ipv6Address
}
agentIpv6ServicePortDefaultRouterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the IPv6 Default Router Address
configured on the Service Port. Removal of a
row will cause index values to be reassigned."
::= { agentIpv6ServicePortDefaultRouterEntry 1 }
agentIpv6ServicePortDefaultRouter OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Address of the IPv6 Default Router configured
on the Service Port."
::= { agentIpv6ServicePortDefaultRouterEntry 2 }
-- IPv6 Service Port Neighbor Table
agentIpv6ServicePortNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Service Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Service Port."
::= { agentIpv6ServicePortGroup 3 }
agentIpv6ServicePortNbrEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Service Port Neighbor entry."
INDEX { agentIpv6ServicePortNbrAddr }
::= { agentIpv6ServicePortNbrTable 1 }
AgentIpv6ServicePortNbrEntry ::= SEQUENCE {
agentIpv6ServicePortNbrAddr Ipv6Address,
agentIpv6ServicePortNbrPhysAddr MacAddress,
agentIpv6ServicePortNbrState INTEGER,
agentIpv6ServicePortNbrUpdated TimeStamp,
agentIpv6ServicePortNbrIsRouter TruthValue,
agentIpv6ServicePortNbrType INTEGER
}
agentIpv6ServicePortNbrAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ipv6 Address of a neighbor switch visible to the Service Port."
::= { agentIpv6ServicePortNbrEntry 1 }
agentIpv6ServicePortNbrPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MacAddress of the neighboring switch."
::= { agentIpv6ServicePortNbrEntry 2 }
agentIpv6ServicePortNbrState OBJECT-TYPE
SYNTAX INTEGER { reachable(1),
stale(2),
delay(3),
probe(4),
unknown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the neighboring switch:
reachable(1) - The neighbor is reachable by this switch.
stale(2) - Information about the neighbor is scheduled for deletion.
delay(3) - No information has been received from neighbor during delay period.
probe(4) - Switch is attempting to probe for this neighbor.
unknown(6) - Unknown status."
::= { agentIpv6ServicePortNbrEntry 3 }
agentIpv6ServicePortNbrUpdated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sysUpTime that this neighbor has been updated."
::= { agentIpv6ServicePortNbrEntry 4 }
agentIpv6ServicePortNbrIsRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns true(1) if the neighbor machine is a router,
false(2) otherwise."
::= { agentIpv6ServicePortNbrEntry 5 }
agentIpv6ServicePortNbrType OBJECT-TYPE
SYNTAX INTEGER { other(1), -- none of the following
dynamic(2), -- dynamically resolved
static(3), -- statically configured
local(4) -- local interface
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the mapping.
The 'dynamic(2)' type indicates that the
IPv6 address to physical addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery protocol.
The static(3)' types indicates that the mapping has been
statically configured.
The local(4) indicates that the mapping is provided for an
entity's own interface address."
::= { agentIpv6ServicePortNbrEntry 6 }
-- IPv6 Service Port Static Neighbor Config Table
agentIpv6ServicePortNbrCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortNbrCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains an entry for each static
IPv6 Neighbor on the Service Port."
::= { agentIpv6ServicePortGroup 4 }
agentIpv6ServicePortNbrCfgEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortNbrCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of the static IPv6 Neighbor on the Service Port."
INDEX { agentIpv6ServicePortNbrCfgAddr }
::= { agentIpv6ServicePortNbrCfgTable 1 }
AgentIpv6ServicePortNbrCfgEntry ::= SEQUENCE {
agentIpv6ServicePortNbrCfgAddr Ipv6Address,
agentIpv6ServicePortNbrCfgPhysAddr MacAddress,
agentIpv6ServicePortNbrCfgEntryStatus RowStatus
}
agentIpv6ServicePortNbrCfgAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ipv6 Address of a static neighbor on the Service Port."
::= { agentIpv6ServicePortNbrCfgEntry 1 }
agentIpv6ServicePortNbrCfgPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC Address of a static neighbor on the Service Port."
::= { agentIpv6ServicePortNbrCfgEntry 2 }
agentIpv6ServicePortNbrCfgEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create or delete the static neighbor entry on the Service Port.
The configured static neighbor entry is always active."
::= { agentIpv6ServicePortNbrCfgEntry 3 }
--**************************************************************************************
-- agentIpv6IcmpGroup
--
--**************************************************************************************
agentIpv6IcmpControlGroup OBJECT IDENTIFIER ::= { agentIpv6Group 8 }
agentIpv6IcmpRateLimitInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time interval between tokens being placed in the bucket for
ICMP Ratelimit."
::= { agentIpv6IcmpControlGroup 1 }
agentIpv6IcmpRateLimitBurstSize OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of tokens to be placed after timeout."
::= { agentIpv6IcmpControlGroup 2 }
--**************************************************************************************
-- agentDhcp6ClientParametersTable
--
--**************************************************************************************
agentDhcp6ClientParametersTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcp6ClientParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the DHCPv6 Client parameters on the interfaces."
::= { agentIpv6Group 9 }
agentDhcp6ClientParametersEntry OBJECT-TYPE
SYNTAX AgentDhcp6ClientParametersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCPv6 Client information on an interface."
INDEX { agentDhcp6ClientInterfaceIndex }
::= { agentDhcp6ClientParametersTable 1 }
AgentDhcp6ClientParametersEntry ::= SEQUENCE {
agentDhcp6ClientInterfaceIndex Unsigned32,
agentDhcp6ClientPrefix Ipv6AddressPrefix,
agentDhcp6ClientPrefixlength INTEGER,
agentDhcp6ClientState INTEGER,
agentDhcp6ClientServerDUID DisplayString,
agentDhcp6ClientT1Time Unsigned32,
agentDhcp6ClientT2Time Unsigned32,
agentDhcp6ClientIAID Unsigned32,
agentDhcp6ClientPreferredLifeTime Unsigned32,
agentDhcp6ClientValidLifeTime Unsigned32,
agentDhcp6ClientRenewTime Unsigned32,
agentDhcp6ClientExpireTime Unsigned32
}
agentDhcp6ClientInterfaceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Interface index on which the IPv6 address is leased by the DHCPv6 Server."
::= { agentDhcp6ClientParametersEntry 1 }
agentDhcp6ClientPrefix OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Prefix leased by the DHCPv6 Server."
::= { agentDhcp6ClientParametersEntry 2 }
agentDhcp6ClientPrefixlength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server."
::= { agentDhcp6ClientParametersEntry 3 }
agentDhcp6ClientState OBJECT-TYPE
SYNTAX INTEGER{
inactive(0),
solicit(1),
request(2),
active(3),
renew(4),
rebind(5),
release(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the DHCPv6 Client on this interface."
::= { agentDhcp6ClientParametersEntry 4 }
agentDhcp6ClientServerDUID OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface."
::= { agentDhcp6ClientParametersEntry 5 }
agentDhcp6ClientT1Time OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval
after which the address is requested for renewal."
::= { agentDhcp6ClientParametersEntry 6 }
agentDhcp6ClientT2Time OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval
after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages."
::= { agentDhcp6ClientParametersEntry 7 }
agentDhcp6ClientIAID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An identifier for an identity association chosen by this Client."
::= { agentDhcp6ClientParametersEntry 8 }
agentDhcp6ClientPreferredLifeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server."
::= { agentDhcp6ClientParametersEntry 9 }
agentDhcp6ClientValidLifeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server."
::= { agentDhcp6ClientParametersEntry 10 }
agentDhcp6ClientRenewTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address."
::= { agentDhcp6ClientParametersEntry 11 }
agentDhcp6ClientExpireTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) when the DHCPv6 leased address expires."
::= { agentDhcp6ClientParametersEntry 12 }
--****************************************************************
-- agentIpv6RoutingTableSummaryGroup
--
--****************************************************************
agentIpv6RoutingTableSummaryGroup OBJECT IDENTIFIER ::= { agentIpv6Group 10 }
agentIpv6ConnectedRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of connected routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 1 }
agentIpv6StaticRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of static routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 2 }
agentIpv66to4Routes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6to4 routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 3 }
agentIpv6OspfRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 4 }
agentIpv6OspfIntraRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 intra-area routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 5 }
agentIpv6OspfInterRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 inter-area routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 6 }
agentIpv6OspfExt1Routes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 external type 1 routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 7 }
agentIpv6OspfExt2Routes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OSPFv2 external type 2 routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 8 }
agentIpv6BgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 9 }
agentIpv6EbgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external BGP routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 10 }
agentIpv6IbgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of internal BGP routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 11 }
agentIpv6LocalBgpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local BGP routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 12 }
agentIpv6RejectRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reject routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 13 }
agentIpv6TotalRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 14 }
agentIpv6BestRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 routes in the forwarding table."
::= { agentIpv6RoutingTableSummaryGroup 15 }
agentIpv6BestRoutesHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of IPv6 routes in the forwarding table."
::= { agentIpv6RoutingTableSummaryGroup 16 }
agentIpv6AlternateRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alternate routes in the IPv6 routing table.
An alternate route is less preferred than the best route and is not used for forwarding."
::= { agentIpv6RoutingTableSummaryGroup 17 }
agentIpv6RouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes added to the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 18 }
agentIpv6RouteModifies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes changed in the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 19 }
agentIpv6RouteDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes removed from the IPv6 routing table."
::= { agentIpv6RoutingTableSummaryGroup 20 }
agentIpv6UnresolvedRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 route adds that failed because none of the route's next hops were on a local subnet."
::= { agentIpv6RoutingTableSummaryGroup 21 }
agentIpv6InvalidRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 routes adds that failed because the route was invalid."
::= { agentIpv6RoutingTableSummaryGroup 22 }
agentIpv6FailedRouteAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 routes adds that failed because of a resource limitation in the routing table"
::= { agentIpv6RoutingTableSummaryGroup 23 }
agentIpv6ReservedLocals OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 routing table entries reserved for a local subnet on a routing interface that is down. "
::= { agentIpv6RoutingTableSummaryGroup 24 }
agentIpv6UniqueNextHops OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of distinct next hops used among all IPv6 routes currently in the routing table.
These include local interfaces for local routes and neighbors for indirect routes."
::= { agentIpv6RoutingTableSummaryGroup 25 }
agentIpv6UniqueNextHopsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest count of unique next hops since counters were last cleared."
::= { agentIpv6RoutingTableSummaryGroup 26 }
agentIpv6NextHopGroups OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of next hop groups in use by one or more routes.
Each next hop group includes one or more next hops."
::= { agentIpv6RoutingTableSummaryGroup 27 }
agentIpv6NextHopGroupsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest count of next hop groups since counters were last cleared."
::= { agentIpv6RoutingTableSummaryGroup 28 }
agentIpv6EcmpGroups OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of next hop groups with multiple next hops."
::= { agentIpv6RoutingTableSummaryGroup 29 }
agentIpv6EcmpGroupsHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark of the number of ECMP groups."
::= { agentIpv6RoutingTableSummaryGroup 30 }
agentIpv6EcmpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of IPv6 routes with multiple next hops."
::= { agentIpv6RoutingTableSummaryGroup 31 }
agentIpv6TruncEcmpRoutes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ECMP routes that are currently installed in the forwarding table
with just one next hop. The forwarding table may limit the number of ECMP
routes or the number of ECMP groups. When an ECMP route cannot be installed
because such a limit is reached, the route is installed with a single next hop."
::= { agentIpv6RoutingTableSummaryGroup 32 }
agentIpv6EcmpRetries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ECMP routes that have been installed in the forwarding table
after initially being installed with a single next hop."
::= { agentIpv6RoutingTableSummaryGroup 33 }
--****************************************************************
-- agentIpv6EcmpCountTable
--
--************************************************************
agentIpv6EcmpCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6EcmpCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A count of the number of routes with each number of ECMP next hops.
A walk of this table only returns the entries with a non-zero value
for agentIpv6EcmpRouteCount."
::= { agentIpv6Group 11 }
agentIpv6EcmpCountEntry OBJECT-TYPE
SYNTAX AgentIpv6EcmpCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Number of IPv6 routes with a given number of next hops."
INDEX { agentIpv6EcmpNextHopCount }
::= { agentIpv6EcmpCountTable 1 }
AgentIpv6EcmpCountEntry ::= SEQUENCE {
agentIpv6EcmpNextHopCount
Unsigned32,
agentIpv6EcmpRouteCount
Gauge32
}
agentIpv6EcmpNextHopCount OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of next hops in a route. From 0 to the maximum number of
next hops in an ECMP route. The maximum varies by platform."
::= { agentIpv6EcmpCountEntry 1 }
agentIpv6EcmpRouteCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 routes with agentIpv6EcmpNextHopCount next hops."
::= { agentIpv6EcmpCountEntry 2 }
--****************************************************************
-- agentIpv6NetworkPortGroup
--
--****************************************************************
agentIpv6NetworkPortGroup OBJECT IDENTIFIER ::= { agentIpv6Group 12 }
-- IPv6 Network Port Neighbor Table
agentIpv6NetworkPortNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6NetworkPortNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Network Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Network Port."
::= { agentIpv6NetworkPortGroup 1 }
agentIpv6NetworkPortNbrEntry OBJECT-TYPE
SYNTAX AgentIpv6NetworkPortNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Network Port Neighbor entry."
INDEX { agentIpv6NetworkPortNbrAddr }
::= { agentIpv6NetworkPortNbrTable 1 }
AgentIpv6NetworkPortNbrEntry ::= SEQUENCE {
agentIpv6NetworkPortNbrAddr Ipv6Address,
agentIpv6NetworkPortNbrPhysAddr MacAddress,
agentIpv6NetworkPortNbrState INTEGER,
agentIpv6NetworkPortNbrUpdated TimeStamp,
agentIpv6NetworkPortNbrIsRouter TruthValue,
agentIpv6NetworkPortNbrType INTEGER
}
agentIpv6NetworkPortNbrAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ipv6 Address of a neighbor switch visible to the Network Port."
::= { agentIpv6NetworkPortNbrEntry 1 }
agentIpv6NetworkPortNbrPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MacAddress of the neighboring switch."
::= { agentIpv6NetworkPortNbrEntry 2 }
agentIpv6NetworkPortNbrState OBJECT-TYPE
SYNTAX INTEGER { reachable(1),
stale(2),
delay(3),
probe(4),
unknown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the neighboring switch:
reachable(1) - The neighbor is reachable by this switch.
stale(2) - Information about the neighbor is scheduled for deletion.
delay(3) - No information has been received from neighbor during delay period.
probe(4) - Switch is attempting to probe for this neighbor.
unknown(6) - Unknown status."
::= { agentIpv6NetworkPortNbrEntry 3 }
agentIpv6NetworkPortNbrUpdated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sysUpTime that this neighbor has been updated."
::= { agentIpv6NetworkPortNbrEntry 4 }
agentIpv6NetworkPortNbrIsRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns true(1) if the neighbor machine is a router,
false(2) otherwise."
::= { agentIpv6NetworkPortNbrEntry 5 }
agentIpv6NetworkPortNbrType OBJECT-TYPE
SYNTAX INTEGER { other(1), -- none of the following
dynamic(2), -- dynamically resolved
static(3), -- statically configured
local(4) -- local interface
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the mapping.
The 'dynamic(2)' type indicates that the
IPv6 address to physical addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery protocol.
The static(3)' types indicates that the mapping has been
statically configured.
The local(4) indicates that the mapping is provided for an
entity's own interface address."
::= { agentIpv6NetworkPortNbrEntry 6 }
-- IPv6 Network Port Static Neighbor Config Table
agentIpv6NetworkPortNbrCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6NetworkPortNbrCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains an entry for each static
IPv6 Neighbor on the Network Port."
::= { agentIpv6NetworkPortGroup 2 }
agentIpv6NetworkPortNbrCfgEntry OBJECT-TYPE
SYNTAX AgentIpv6NetworkPortNbrCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of the static IPv6 Neighbor on the Network Port."
INDEX { agentIpv6NetworkPortNbrCfgAddr }
::= { agentIpv6NetworkPortNbrCfgTable 1 }
AgentIpv6NetworkPortNbrCfgEntry ::= SEQUENCE {
agentIpv6NetworkPortNbrCfgAddr Ipv6Address,
agentIpv6NetworkPortNbrCfgPhysAddr MacAddress,
agentIpv6NetworkPortNbrCfgEntryStatus RowStatus
}
agentIpv6NetworkPortNbrCfgAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ipv6 Address of a static neighbor on the Network Port."
::= { agentIpv6NetworkPortNbrCfgEntry 1 }
agentIpv6NetworkPortNbrCfgPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC Address of a static neighbor on the Network Port."
::= { agentIpv6NetworkPortNbrCfgEntry 2 }
agentIpv6NetworkPortNbrCfgEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create or delete the static neighbor entry on the Network Port.
The configured static neighbor entry is always active."
::= { agentIpv6NetworkPortNbrCfgEntry 3 }
-- IPv6 Static Neighbor Config table
agentIpv6NbrCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6NbrCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains an entry for each static
IPv6 Neighbor on the Network Port."
::= { agentIpv6Group 13 }
agentIpv6NbrCfgEntry OBJECT-TYPE
SYNTAX AgentIpv6NbrCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of the static IPv6 Neighbor on the Network Port."
INDEX { agentIpv6IfIndex, agentIpv6NbrCfgAddr }
::= { agentIpv6NbrCfgTable 1 }
AgentIpv6NbrCfgEntry ::= SEQUENCE {
agentIpv6IfIndex Ipv6IfIndex,
agentIpv6NbrCfgAddr Ipv6Address,
agentIpv6NbrCfgPhysAddr MacAddress,
agentIpv6NbrCfgEntryStatus RowStatus
}
agentIpv6IfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique non-zero value identifying
the particular IPv6 interface."
::= { agentIpv6NbrCfgEntry 1 }
agentIpv6NbrCfgAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ipv6 Address of a static neighbor on the Routing or Host interface."
::= { agentIpv6NbrCfgEntry 2 }
agentIpv6NbrCfgPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC Address of a static neighbor on the Routing or Host interface."
::= { agentIpv6NbrCfgEntry 3 }
agentIpv6NbrCfgEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create or delete the static neighbor entry on the Routing or Host interface.
The configured static neighbor entry is always active."
::= { agentIpv6NbrCfgEntry 4 }
--***********************************************************************************
-- IPv6 NUD related parameters
--
--***********************************************************************************
agentIpv6NeighborsDynamicRenew OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the periodic NUD (neighbor unreachability detection) to be
run on the existing IPv6 neighbor entries based on the activity of the
entries in the hardware. If the setting is disabled, only those entries that
are actively used in the hardware are triggered for NUD. If the setting is
enabled, all the entries are triggered for NUD irrespective of their usage
in the hardware."
DEFVAL { disable }
::= { agentIpv6Group 14 }
agentIpv6UnresolvedDataRateLimit OBJECT-TYPE
SYNTAX Integer32 (50..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate in packets-per-second for the number of IPv6 data packets trapped
to CPU when the packet fails to be forwarded in the hardware due to unresolved
hardware address of the destined IPv6 node."
DEFVAL { 1024 }
::= { agentIpv6Group 15 }
agentIpv6NUDMaxUnicastSolicits OBJECT-TYPE
SYNTAX Integer32 (3..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of unicast Neighbor Solicitations sent during neighbor
resolution or during NUD (neighbor unreachabililty detection) before
switching to multicast Neighbor Solicitations."
DEFVAL { 3 }
::= { agentIpv6Group 16 }
agentIpv6NUDMaxMulticastSolicits OBJECT-TYPE
SYNTAX Integer32 (3..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of multicast Neighbor Solicitations sent during neighbor
resolution or during NUD (neighbor unreachabililty detection)."
DEFVAL { 3 }
::= { agentIpv6Group 17 }
agentIpv6NUDBackoffMultiple OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The exponential backoff multiple to be used in the calculation of the next
timeout value for Neighbor Solicitation transmission during NUD
(neighbor unreachabililty detection) following the exponential backoff algorithm.
The next timeout value is limited to a maximum value of 60 seconds if the value
with exponential backoff calculation is greater than 60 seconds."
DEFVAL { 1 }
::= { agentIpv6Group 18 }
END
Reference in New Issue Copy Permalink