mibs/MIBS/radlan/RADLAN-TIMESYNCHRONIZATION-MIB

884 lines
32 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
RADLAN-TIMESYNCHRONIZATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
rnd FROM RADLAN-MIB
TruthValue FROM RADLAN-SNMPv2
DisplayString FROM SNMPv2-TC-v1
Unsigned32, Integer32, IpAddress FROM SNMPv2-SMI
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC;
rlTimeSynchronization MODULE-IDENTITY
LAST-UPDATED "200408030024Z"
ORGANIZATION "Radlan Computer Communication Ltd."
CONTACT-INFO
"radlan.com"
DESCRIPTION
"The MIB module describes the private MIB for SNTP & TIME definitions."
REVISION "200311230024Z"
DESCRIPTION
"Initial revision"
::= { rnd 92 }
rlTimeSyncMethodMode OBJECT IDENTIFIER ::= { rlTimeSynchronization 1 }
rlSntpNtpClient OBJECT IDENTIFIER ::= { rlTimeSynchronization 2 }
rlSntpNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 1 }
rlSntpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 2 }
rlNtpConfig OBJECT IDENTIFIER ::= { rlSntpNtpClient 3 }
--
-- Textual Conventions
--
NTPTimeStamp ::= TEXTUAL-CONVENTION
DISPLAY-HINT "4d.4d"
STATUS current
DESCRIPTION "NTP timestamps are represented as a 64-bit
unsigned fixed-point number, in seconds relative to
00:00 on 1 January 1900. The integer part is in the
first 32 bits and the fraction part is in the last
32 bits."
REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.1"
SYNTAX OCTET STRING (SIZE (8))
NTPSignedTimeValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d.2d"
STATUS current
DESCRIPTION "The time in seconds that could represent signed
quantities like time delay with respect to some
source. This textual-convention is specific to RADLAN
implementation of NTP where 32-bit integers are used
for such quantities. The signed integer part is in
the first 16 bits and the fraction part is in the
last 16 bits."
SYNTAX OCTET STRING (SIZE (4))
NTPStratum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Indicates the stratum of the clock. The stratum
defines the accuracy of a time server. Higher the
stratum, lower the accuracy.
0, unspecified
1, primary reference (e.g., calibrated atomic clock,
radio clock)
2-255, secondary reference (via NTP)"
REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 2.2"
SYNTAX Integer32 (0..255)
-- ----------------------------------------------------------------------
-- Global TimeSyncMethod
-- ----------------------------------------------------------------------
rlTimeSyncMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TimeSync Mib Version."
::= { rlTimeSyncMethodMode 1 }
rndTimeSyncManagedTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time will be sent in the format hhmmss"
::= { rlTimeSyncMethodMode 2 }
rndTimeSyncManagedDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The date will be sent in the format ddmmyy"
::= { rlTimeSyncMethodMode 3 }
rndTimeSyncManagedDateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The date and time will be sent in the format ddmmyyhhmmss"
::= { rlTimeSyncMethodMode 4 }
rlTimeSyncMethod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
sntp(2),
ntp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to be used for time synchronization in the device."
DEFVAL { none }
::= { rlTimeSyncMethodMode 5 }
rlTimeZone OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Offset from Greenwich time (format [+/-]hh:mm)."
::= {rlTimeSyncMethodMode 6 }
rlTimeZoneCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Code definition for current TimeZone."
::= {rlTimeSyncMethodMode 7 }
rlDaylightSavingTimeMode OBJECT-TYPE
SYNTAX INTEGER {
recurring(1),
date(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Daylight Saving Time - Recurring/Date/None."
DEFVAL { none }
::= { rlTimeSyncMethodMode 8 }
rlDaylightSavingTimeStart OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Daylight Saving Time start date.
In recurring mode: week wday month hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)"
::= { rlTimeSyncMethodMode 9 }
rlDaylightSavingTimeEnd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(14))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Daylight Saving Time end date.
In recurring mode: week wday month hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)"
::= { rlTimeSyncMethodMode 10 }
rlDaylightSavingTimeOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Daylight Saving Time - The number of minutes to add to
the clock during summer time."
DEFVAL { 60 }
::= { rlTimeSyncMethodMode 11 }
rlDaylightSavingTimeCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Code definition for current Daylight Saving Time."
::= {rlTimeSyncMethodMode 12 }
rlTZDSTOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Time Zone and Daylight Saving Time offset
in seconds."
::= { rlTimeSyncMethodMode 13 }
-- ----------------------------------------------------------------------
-- SNTP/NTP client configuration parameters
-- ----------------------------------------------------------------------
rlSntpNtpMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SntpNtp Mib Version."
::= { rlSntpNtpConfig 1 }
rlSntpNtpConfigMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unicast(2),
anycast(3),
multicast(4),
unicastAnycast(5),
unicastMulticast(6),
anycastMulticast(7),
unicastAnycastMulticast(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current configuration operational mode of SNTP/NTP client."
DEFVAL { none }
::= { rlSntpNtpConfig 2 }
rlSntpNtpConfigSysStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of the local clock. If the value is set
to 1, i.e., this is a primary reference, then the
Primary-Clock procedure described in Section 3.4.6,
in RFC-1305 is invoked."
::= { rlSntpNtpConfig 3 }
rlSntpNtpConfigPollInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Period of time (in seconds) between succesive attempts to
perform an update via SNTP."
DEFVAL { 1024 }
::= { rlSntpNtpConfig 4 }
rlSntpNtpConfigPrimaryPollSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ip Address of a trusted SNTP server for polling."
::= { rlSntpNtpConfig 5 }
rlSntpNtpConfigPrimaryPollSrvMrid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mrid of the primary server."
::= { rlSntpNtpConfig 6 }
rlSntpNtpConfigPrimaryPollSrvIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The interface addressed of the primary server."
::= { rlSntpNtpConfig 7 }
rlSntpNtpConfigPrimaryPollSrvStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of the primary polling server."
::= { rlSntpNtpConfig 8 }
rlSntpNtpConfigSyncSrvAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ip Address of the synced server."
::= { rlSntpNtpConfig 9 }
rlSntpNtpConfigSyncSrvMrid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mrid of the synced server."
::= { rlSntpNtpConfig 10 }
rlSntpNtpConfigSyncSrvIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The interface addressed of the synced server."
::= { rlSntpNtpConfig 11 }
rlSntpNtpConfigSyncSrvType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unicast(2),
anycast(3),
broadcast(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Synced server type."
DEFVAL { none }
::= { rlSntpNtpConfig 12 }
rlSntpNtpConfigSyncSrvStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of the synced server."
::= { rlSntpNtpConfig 13 }
rlSntpNtpConfigRetryTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNTP/NTP requests Retry Interval."
::= { rlSntpNtpConfig 14 }
rlSntpNtpConfigRetryCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNTP/NTP requests Retry Count."
::= { rlSntpNtpConfig 15 }
-- ----------------------------------------------------------------------
-- SNTP client configuration parameters
-- ----------------------------------------------------------------------
rlSntpClientMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current operational mode of SNTP client."
DEFVAL { none }
::= { rlSntpConfig 1 }
rlSntpUnicastAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP Unicast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled."
DEFVAL { disabled }
::= { rlSntpConfig 2 }
rlSntpBroadcastAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP Broadcast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled."
DEFVAL { disabled }
::= { rlSntpConfig 3 }
rlSntpAnycastAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP Anycast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled."
DEFVAL { disabled }
::= { rlSntpConfig 4 }
rlSntpUnicastPollState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP Unicast poll state - TRUE for polled."
DEFVAL { false }
::= { rlSntpConfig 5 }
rlSntpBroadcastPollState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP Broadcast poll state - TRUE for polled."
DEFVAL { false }
::= { rlSntpConfig 6 }
rlSntpAnycastPollState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP Anycast poll state - TRUE for polled."
DEFVAL { false }
::= { rlSntpConfig 7 }
rlSntpAuthenticationState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP authentication state- Enable/Disable SNTP."
DEFVAL { disabled }
::= { rlSntpConfig 8 }
rlTimeValidFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Is time valid."
DEFVAL { false }
::= { rlSntpConfig 9 }
-- ----------------------------------------------------------------------
-- Table for configuring Interfaces (Broadcast)
-- ----------------------------------------------------------------------
rlSntpConfigBroadcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSntpBroadcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing broadcast mode information per
interface."
::= { rlSntpConfig 10 }
rlSntpBroadcastEntry OBJECT-TYPE
SYNTAX RlSntpBroadcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Private paramters for interface:
sntp status, broadcast mode."
INDEX { rlSntpBroadcastIfIndex }
::= { rlSntpConfigBroadcastTable 1 }
RlSntpBroadcastEntry ::=
SEQUENCE {
rlSntpBroadcastIfIndex INTEGER,
rlSntpBroadcastIfAdminState INTEGER,
rlSntpBroadcastMode INTEGER,
rlSntpBroadcastPolled TruthValue,
rlSntpBroadcastAddress IpAddress,
rlSntpBroadcastStratum NTPStratum,
rlSntpBroadcastLastResp NTPTimeStamp,
rlSntpBroadcastStatus INTEGER,
rlSntpBroadcastOffset NTPTimeStamp,
rlSntpBroadcastDelay NTPSignedTimeValue,
rlSntpBroadcastRowStatus RowStatus
}
rlSntpBroadcastIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface addressed by this entry."
::= {rlSntpBroadcastEntry 1}
rlSntpBroadcastIfAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP interface Adminstrative state- Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled."
DEFVAL { disabled }
::= { rlSntpBroadcastEntry 2 }
rlSntpBroadcastMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
receive(2),
send(3),
receiveSend(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNTP/NTP Broadcast Mode.
none - no broadcast SNTP packets are received or sent.
Receive - host only receive SNTP packets that were sent
to broadcast address (were not directed to
the host). This is multicast mode in the RFC.
Send - host only send SNTP packets and wait for replies
directed to the host. This is anycast mode in
the RFC.
ReceiveSend - host receive broadcast messages (destination
is broadcast address in the received messages)
and send SNTP packets to wait for replies
directed to the host (destination address
of the reply is the host address). This mode
combines anycast and multicast modes in the
RFC."
DEFVAL { receiveSend }
::= { rlSntpBroadcastEntry 3 }
rlSntpBroadcastPolled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
DEFVAL { false }
::= { rlSntpBroadcastEntry 4 }
rlSntpBroadcastAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ip Address of a trusted SNTP server."
::= { rlSntpBroadcastEntry 5 }
rlSntpBroadcastStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of this server."
::= { rlSntpBroadcastEntry 6 }
rlSntpBroadcastLastResp OBJECT-TYPE
SYNTAX NTPTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNTP Broadcast Last Response Time"
::= { rlSntpBroadcastEntry 7 }
rlSntpBroadcastStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
inProcess(2),
up(3),
down(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Operational State of the remote IP Address of
the SNTP Broadcast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets."
DEFVAL { unknown }
::= { rlSntpBroadcastEntry 8 }
rlSntpBroadcastOffset OBJECT-TYPE
SYNTAX NTPTimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030."
::= { rlSntpBroadcastEntry 9 }
rlSntpBroadcastDelay OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030."
::= { rlSntpBroadcastEntry 10 }
rlSntpBroadcastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Status of this SNTP broadcast interface
information."
::= { rlSntpBroadcastEntry 11 }
rlSntpConfigAnycastTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSntpAnycastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing anycast information per
interface."
::= { rlSntpConfig 11 }
rlSntpAnycastEntry OBJECT-TYPE
SYNTAX RlSntpAnycastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Private paramters for interface:
server info."
INDEX { rlSntpAnycastIfIndex }
::= { rlSntpConfigAnycastTable 1 }
RlSntpAnycastEntry ::=
SEQUENCE {
rlSntpAnycastIfIndex INTEGER,
rlSntpAnycastAddress IpAddress,
rlSntpAnycastStratum NTPStratum,
rlSntpAnycastLastResp NTPTimeStamp,
rlSntpAnycastStatus INTEGER,
rlSntpAnycastOffset NTPTimeStamp,
rlSntpAnycastDelay NTPSignedTimeValue,
rlSntpAnycastRowStatus RowStatus
}
rlSntpAnycastIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface addressed by this entry."
::= {rlSntpAnycastEntry 1}
rlSntpAnycastAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ip Address of a trusted SNTP server."
::= { rlSntpAnycastEntry 2 }
rlSntpAnycastStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of this server."
::= { rlSntpAnycastEntry 3 }
rlSntpAnycastLastResp OBJECT-TYPE
SYNTAX NTPTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNTP Anycast Last Response Time"
::= { rlSntpAnycastEntry 4 }
rlSntpAnycastStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
inProcess(2),
up(3),
down(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Operational State of the remote IP Address of
the SNTP Anycast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets."
DEFVAL { unknown }
::= { rlSntpAnycastEntry 5 }
rlSntpAnycastOffset OBJECT-TYPE
SYNTAX NTPTimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030."
::= { rlSntpAnycastEntry 6 }
rlSntpAnycastDelay OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030."
::= { rlSntpAnycastEntry 7 }
rlSntpAnycastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Status of this SNTP anycast interface
information."
::= { rlSntpAnycastEntry 8 }
-- ----------------------------------------------------------------------
-- Table for configuring Servers (Unicast)
-- ----------------------------------------------------------------------
rlSntpConfigServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing trusted SNTP servers to be queried in
unicast or broadcast mode."
::= { rlSntpConfig 12 }
rlSntpServerEntry OBJECT-TYPE
SYNTAX RlSntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A trusted server."
INDEX { rlSntpServerAddress }
::= { rlSntpConfigServerTable 1 }
RlSntpServerEntry ::=
SEQUENCE {
rlSntpServerAddress IpAddress,
rlSntpServerPolled TruthValue,
rlSntpServerStratum NTPStratum,
rlSntpServerLastResp NTPTimeStamp,
rlSntpServerStatus INTEGER,
rlSntpServersOffset NTPTimeStamp,
rlSntpServersDelay NTPSignedTimeValue,
rlSntpServersKeyIdentifier Unsigned32,
rlSntpServerRowStatus RowStatus
}
rlSntpServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ip Address of a trusted SNTP server."
::= { rlSntpServerEntry 1 }
rlSntpServerPolled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TRUE if participating in polling cycle, else FALSE."
DEFVAL { false }
::= { rlSntpServerEntry 2 }
rlSntpServerStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stratum of this server."
::= { rlSntpServerEntry 3 }
rlSntpServerLastResp OBJECT-TYPE
SYNTAX NTPTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNTP Server Last Response Time"
::= { rlSntpServerEntry 4 }
rlSntpServerStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
inProcess(2),
up(3),
down(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Operational State of the remote IP Address of
the SNTP Server.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets."
DEFVAL { unknown }
::= { rlSntpServerEntry 5 }
rlSntpServersOffset OBJECT-TYPE
SYNTAX NTPTimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030."
::= { rlSntpServerEntry 6 }
rlSntpServersDelay OBJECT-TYPE
SYNTAX NTPSignedTimeValue
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030."
::= { rlSntpServerEntry 7 }
rlSntpServersKeyIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Authentication key identifier. The valid range is
1-4294967295.
Value zero, means no authentication is being done."
::= { rlSntpServerEntry 8 }
rlSntpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Status of this SNTP server information."
::= { rlSntpServerEntry 9 }
-- ----------------------------------------------------------------------
-- Table for configuring authentication keys
-- ----------------------------------------------------------------------
rlSntpConfigAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSntpAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table authentication keys."
::= { rlSntpConfig 13 }
rlSntpAuthenticationEntry OBJECT-TYPE
SYNTAX RlSntpAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Keys information for authenticationof NTP packets."
INDEX { rlSntpAuthenticationKeyID }
::= { rlSntpConfigAuthenticationTable 1 }
RlSntpAuthenticationEntry ::=
SEQUENCE {
rlSntpAuthenticationKeyID Unsigned32 (1..4294967295),
rlSntpAuthenticationKeyValue DisplayString,
rlSntpAuthenticationKeyState INTEGER,
rlSntpAuthenticationRowStatus RowStatus
}
rlSntpAuthenticationKeyID OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The key identifier. Valid rabge for key identifier
is 1-4294967295."
::= {rlSntpAuthenticationEntry 1}
rlSntpAuthenticationKeyValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key value."
::= { rlSntpAuthenticationEntry 2 }
rlSntpAuthenticationKeyState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Authentication key state - Enable/Disable key."
DEFVAL { disabled }
::= { rlSntpAuthenticationEntry 3 }
rlSntpAuthenticationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Status of this Authentication key information."
::= { rlSntpAuthenticationEntry 4 }
END