mibs/MIBS/raisecom/ROSMGMT-OSPFv2-MIB

4684 lines
166 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- ROSMGMT-OSPFv2-MIB.mib
--
-- May 2010, zhangyan
--
-- Copyright(c) 2020 by RAISECOM TECH, Ltd.
-- All rights reserved.
--
-- *****************************************************************
--MibName=rosMgmtOspf
ROSMGMT-OSPFV2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,Counter32, Gauge32,
Integer32, Unsigned32, IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus
FROM SNMPv2-TC
EnableVar FROM SWITCH-TC
InterfaceIndexOrZero
FROM IF-MIB
rosMgmt
FROM RAISECOM-BASE-MIB;
rosMgmtOspf MODULE-IDENTITY
LAST-UPDATED "202005070000Z" -- May 07, 2020
ORGANIZATION "Raisecom Technology CO.,Ltd."
CONTACT-INFO
" Raise Systems
Postal: Beijing, China
Tel: 86-010-82884499
E-mail: support@raisecom.com"
DESCRIPTION "This MIB module defines objects to Ospf."
REVISION "202005070000Z" -- May 07, 2020
DESCRIPTION "Initial MIB creation."
::= { rosMgmt 47}
ProcessID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"The OSPF process id."
SYNTAX Unsigned32
AreaID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d.1d.1d.1d"
STATUS current
DESCRIPTION
"An OSPF Area Identifier.
Note that the Area ID, in OSPF, has the same format
as an IP address, but has the function of defining
a summarization point for link state advertisements."
SYNTAX IpAddress
RouterID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d.1d.1d.1d"
STATUS current
DESCRIPTION
"A OSPF Router Identifier.
Note that the Router ID, in OSPF, has the same format
as an IP address, but identifies the router independent
of its IP address."
SYNTAX IpAddress
Metric ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"The OSPF internal metric.
Note that the OSPF metric is defined as an unsigned value
in the range."
SYNTAX Integer32 (0..'FFFF'h)
BigMetric ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"The OSPF external metric."
SYNTAX Integer32 (0..'FFFFFF'h)
Status ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An indication of the operability of an OSPF
function or feature. For example, the status
of an interface: 'enabled' indicates that
it is willing to communicate with other OSPF routers,
and 'disabled' indicates that it is not."
SYNTAX INTEGER { enabled (1), disabled (2) }
PositiveInteger ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"A positive integer. Values in excess are precluded as
unnecessary and prone to interoperability issues."
SYNTAX Integer32 (0..'7FFFFFFF'h)
HelloRange ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"The range of intervals in seconds on which Hello messages
are exchanged."
SYNTAX Integer32 (1..'FFFF'h)
UpToMaxAge ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"The values in seconds that one might find or configure
for variables bounded by the maximum age of an LSA."
SYNTAX Integer32 (0..3600)
DesignatedRouterPriority ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"The range of values defined for the priority of a system
for becoming the designated router."
SYNTAX Integer32 (0..'FF'h)
OspfAuthenticationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authentication type."
SYNTAX INTEGER {
none (0),
simplePassword (1),
md5 (2)
-- reserved for specification by IANA (> 2)
}
-- Define groups in ROSMGMT-OSPFv2-MIB
rosMgmtOspfNotifications OBJECT IDENTIFIER ::= { rosMgmtOspf 1 }
rosMgmtOspfObjects OBJECT IDENTIFIER ::= { rosMgmtOspf 2 }
rosMgmtOspfConformance OBJECT IDENTIFIER ::= { rosMgmtOspf 3 }
-- rosMgmtOspfNotifications
--
-- This group defines the traps related to Ospf.
--
-- Define groups in rosMgmtOspfNotifications
--
-- rosMgmtOspfTrapControl OBJECT IDENTIFIER ::= { rosMgmtOspfNotifications 1 }
--
-- rosMgmtOspfTrapControl
--
-- This Table defines the control infomation of Ospf Traps.
--
rosMgmtOspfTrapControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfTrapControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table enable or disable ospf traps"
::= { rosMgmtOspfNotifications 1 }
rosMgmtOspfTrapControlEntry OBJECT-TYPE
SYNTAX RosMgmtOspfTrapControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfTrapControl.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
INDEX { rosMgmtOspfProcessId }
::= { rosMgmtOspfTrapControlTable 1 }
RosMgmtOspfTrapControlEntry ::=
SEQUENCE {
rosMgmtOspfSetTrap
EnableVar,
rosMgmtOspfConfigErrorType
INTEGER,
rosMgmtOspfPacketType
INTEGER,
rosMgmtOspfPacketSrc
IpAddress
}
rosMgmtOspfSetTrap OBJECT-TYPE
SYNTAX EnableVar
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the Device shoule send traps."
DEFVAL {disable}
::= { rosMgmtOspfTrapControlEntry 1 }
rosMgmtOspfConfigErrorType OBJECT-TYPE
SYNTAX INTEGER {
badVersion (1),
areaMismatch (2),
unknownNbmaNbr (3), -- Router is Dr eligible
unknownVirtualNbr (4),
authTypeMismatch(5),
authFailure (6),
netMaskMismatch (7),
helloIntervalMismatch (8),
deadIntervalMismatch (9),
optionMismatch (10) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Potential types of configuration conflicts.
Used by the ospfConfigError and ospfConfigVir-
tError traps."
::= { rosMgmtOspfTrapControlEntry 2 }
rosMgmtOspfPacketType OBJECT-TYPE
SYNTAX INTEGER {
hello (1),
dbDescript (2),
lsReq (3),
lsUpdate (4),
lsAck (5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF packet types."
::= { rosMgmtOspfTrapControlEntry 3 }
rosMgmtOspfPacketSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of an inbound packet that can-
not be identified by a neighbor instance."
::= { rosMgmtOspfTrapControlEntry 4 }
--
-- rosMgmtOspfTraps
--
-- This Table defines the Ospf Traps.
--
-- Define groups in rosMgmtOspfNotifications
--
rosMgmtOspfTraps OBJECT IDENTIFIER ::= { rosMgmtOspfNotifications 0 }
rosMgmtOspfIfStateChange NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfIfState -- The new state
}
STATUS current
DESCRIPTION
"An rosMgmtOspfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup)."
::= { rosMgmtOspfTraps 1 }
rosMgmtOspfVirtIfStateChange NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfVirtIfState -- The new state
}
STATUS current
DESCRIPTION
"An rosMgmtOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual interface.
This trap should be generated when the inter-
face state regresses (e.g., goes from Point-
to-Point to Down) or progresses to a terminal
state (i.e., Point-to-Point)."
::= { rosMgmtOspfTraps 2 }
rosMgmtOspfNbrStateChange NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfNbrIpAddr,
rosMgmtOspfNbrAddressLessIndex,
rosMgmtOspfNbrRtrId,
rosMgmtOspfNbrState -- The new state
}
STATUS current
DESCRIPTION
"An rosMgmtOspfNbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPF neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
rosMgmtOspfIfStateChange."
::= { rosMgmtOspfTraps 3 }
rosMgmtOspfVirtNbrStateChange NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtNbrArea,
rosMgmtOspfVirtNbrRtrId,
rosMgmtOspfVirtNbrState -- The new state
}
STATUS current
DESCRIPTION
"An rosMgmtOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual neighbor. This trap should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full)."
::= { rosMgmtOspfTraps 4 }
rosMgmtOspfIfConfigError NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfPacketSrc, -- The source IP address
rosMgmtOspfConfigErrorType, -- Type of error
rosMgmtOspfPacketType
}
STATUS current
DESCRIPTION
"An rosMgmtOspfIfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming."
::= { rosMgmtOspfTraps 5 }
rosMgmtOspfVirtIfConfigError NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfConfigErrorType, -- Type of error
rosMgmtOspfPacketType
}
STATUS current
DESCRIPTION
"An ospfConfigError trap signifies that a pack-
et has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming."
::= { rosMgmtOspfTraps 6 }
rosMgmtOspfIfAuthFailure NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfPacketSrc, -- The source IP address
rosMgmtOspfConfigErrorType, -- authTypeMismatch or
-- authFailure
rosMgmtOspfPacketType
}
STATUS current
DESCRIPTION
"An rosMgmtOspfIfAuthFailure trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose authentication key
or authentication type conflicts with this
router's authentication key or authentication
type."
::= { rosMgmtOspfTraps 7 }
rosMgmtOspfVirtIfAuthFailure NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfConfigErrorType, -- authTypeMismatch or
-- authFailure
rosMgmtOspfPacketType
}
STATUS current
DESCRIPTION
"An rosMgmtOspfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key or au-
thentication type conflicts with this router's
authentication key or authentication type."
::= { rosMgmtOspfTraps 8 }
rosMgmtOspfIfRxBadPacket NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfPacketSrc, -- The source IP address
rosMgmtOspfPacketType
}
STATUS current
DESCRIPTION
"An rosMgmtOspfIfRxBadPacket trap signifies that an
OSPF packet has been received on a non-virtual
interface that cannot be parsed."
::= { rosMgmtOspfTraps 9 }
rosMgmtOspfVirtIfRxBadPacket NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfPacketType
}
STATUS current
DESCRIPTION
"An ospfRxBadPacket trap signifies that an OSPF
packet has been received on a virtual interface
that cannot be parsed."
::= { rosMgmtOspfTraps 10 }
rosMgmtOspfTxRetransmit NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfNbrRtrId, -- Destination
rosMgmtOspfPacketType,
rosMgmtOspfLsdbType,
rosMgmtOspfLsdbLsId,
rosMgmtOspfLsdbRouterId
}
STATUS current
DESCRIPTION
"An ospfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a non-
virtual interface. All packets that may be re-
transmitted are associated with an LSDB entry.
The LS type, LS ID, and Router ID are used to
identify the LSDB entry."
::= { rosMgmtOspfTraps 11 }
rosMgmtOspfVirtIfTxRetransmit NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfPacketType,
rosMgmtOspfLsdbType,
rosMgmtOspfLsdbLsId,
rosMgmtOspfLsdbRouterId
}
STATUS current
DESCRIPTION
"An ospfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a virtual
interface. All packets that may be retransmit-
ted are associated with an LSDB entry. The LS
type, LS ID, and Router ID are used to identify
the LSDB entry."
::= { rosMgmtOspfTraps 12 }
rosMgmtOspfOriginateLsa NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
rosMgmtOspfLsdbType,
rosMgmtOspfLsdbLsId,
rosMgmtOspfLsdbRouterId
}
STATUS current
DESCRIPTION
"An ospfOriginateLsa trap signifies that a new
LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happesn every 30 minutes), but
instead will only be invoked when an LSA is
(re)originated due to a topology change. Addi-
tionally, this trap does not include LSAs that
are being flushed because they have reached
MaxAge."
::= { rosMgmtOspfTraps 13 }
rosMgmtOspfMaxAgeLsa NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
rosMgmtOspfLsdbType,
rosMgmtOspfLsdbLsId,
rosMgmtOspfLsdbRouterId
}
STATUS current
DESCRIPTION
"An ospfMaxAgeLsa trap signifies that one of
the LSA in the router's link-state database has
aged to MaxAge."
::= { rosMgmtOspfTraps 14 }
rosMgmtOspfLsdbOverflow NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfExtLsdbLimit
}
STATUS current
DESCRIPTION
"An rosMgmtOspfLsdbOverflow trap signifies that the
number of LSAs in the router's link-state data-
base has exceeded rosMgmtOspfExtLsdbLimit."
::= { rosMgmtOspfTraps 15 }
rosMgmtOspfLsdbApproachingOverflow NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfExtLsdbLimit
}
STATUS current
DESCRIPTION
"An rosMgmtOspfLsdbApproachingOverflow trap signifies
that the number of LSAs in the router's link-
state database has exceeded ninety percent of
rosMgmtOspfExtLsdbLimit."
::= { rosMgmtOspfTraps 16 }
rosMgmtOspfIfKeyValid NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfIfAuthKeyChain
}
STATUS current
DESCRIPTION
"This trap will notify the network manager that some key
associated with an interface recovers valid."
::= { rosMgmtOspfTraps 17 }
rosMgmtOspfIfLastKeyExpiration NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfIfIpAddress,
rosMgmtOspfAddressLessIf,
rosMgmtOspfIfAuthKeyChain
}
STATUS current
DESCRIPTION
"This trap will notify the network manager that the last
key associated with an interface expires."
::= { rosMgmtOspfTraps 18 }
rosMgmtOspfVirtIfKeyValid NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfVirtIfAuthKeyChain
}
STATUS current
DESCRIPTION
"This trap will notify the network manager that some key
associated with an virtual link recovers valid."
::= { rosMgmtOspfTraps 19 }
rosMgmtOspfVirtIfLastKeyExpiration NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRouterId, -- The originator of the trap
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor,
rosMgmtOspfVirtIfAuthKeyChain
}
STATUS current
DESCRIPTION
"This trap will notify the network manager that the last
key associated with an virtual link expires."
::= { rosMgmtOspfTraps 20 }
rosMgmtOspfRedistributeOverflow NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRedistributeProtocol, -- The originator of the trap
rosMgmtOspfRedistributeProcessId,
rosMgmtOspfRedistributeRouteLimit
}
STATUS current
DESCRIPTION
"This trap should be generated when the number of
redistribute routes exceeds limit."
::= { rosMgmtOspfTraps 21 }
rosMgmtOspfRedistributeNotOverflow NOTIFICATION-TYPE
OBJECTS {
rosMgmtOspfProcessId,
rosMgmtOspfRedistributeProtocol, -- The originator of the trap
rosMgmtOspfRedistributeProcessId,
rosMgmtOspfRedistributeRouteLimit
}
STATUS current
DESCRIPTION
"This trap should be generated when the number of
redistribute routes drop to limit."
::= { rosMgmtOspfTraps 22 }
--
-- rosMgmtOspfObjects
--
-- This group defines all the objects related to Ospf.
-- Define groups in rosMgmtOspfObjects
-- rosMgmtOspfGlobalTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 1 }
-- rosMgmtOspfAreaTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 2 }
-- rosMgmtOspfNetWorkTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 3 }
-- rosMgmtOspfStubAreaTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 4 }
-- rosMgmtOspfNssaAreaTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 5 }
-- rosMgmtOspfIfTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 6 }
-- rosMgmtOspfVirtIfTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 7 }
-- rosMgmtOspfNbrTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 8 }
-- rosMgmtOspfNbmaCfgNbrTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 9 }
-- rosMgmtOspfVirtNbrTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 10}
-- rosMgmtOspfAreaAggregateTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 11}
-- rosMgmtOspfExternalAggregateTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 12}
-- rosMgmtOspfLsdbTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 13}
-- rosMgmtOspfAsLsdbTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 14}
-- rosMgmtOspfAreaLsaCountTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 15}
-- rosMgmtOspfRedistributeTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 16}
-- rosMgmtOspfDefaultInfoTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 17}
-- rosMgmtOspfPacketIoStatisTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 18}
-- rosMgmtOspfRouteTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 19}
-- rosMgmtOspfBdrRouteTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 20}
-- rosMgmtOspfDistributeListGroup OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 21}
-- rosMgmtOspfDNBitOperationTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 22}
--
--
-- rosMgmtOspfGlobalTable
--
-- This Table defines the Global Vars.
--
rosMgmtOspfGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF global Vars for every ospf process."
::= { rosMgmtOspfObjects 1 }
rosMgmtOspfGlobalEntry OBJECT-TYPE
SYNTAX RosMgmtOspfGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF global Vars for every ospf process."
INDEX { rosMgmtOspfProcessId }
::= { rosMgmtOspfGlobalTable 1 }
RosMgmtOspfGlobalEntry ::=
SEQUENCE {
rosMgmtOspfProcessId
ProcessID,
rosMgmtOspfRouterId
RouterID,
rosMgmtOspfAdminStat
EnableVar,
rosMgmtOspfVersionNumber
INTEGER,
rosMgmtOspfAreaBdrRtrStatus
TruthValue,
rosMgmtOspfASBdrRtrStatus
TruthValue,
rosMgmtOspfExternLsaCount
Gauge32,
rosMgmtOspfExternLsaCksumSum
Integer32,
rosMgmtOspfOriginateNewLsas
Counter32,
rosMgmtOspfRxNewLsas
Counter32,
rosMgmtOspfExtLsdbLimit
Integer32,
rosMgmtOspfExitOverflowInterval
PositiveInteger,
rosMgmtOspfReferenceBandwidth
Unsigned32,
rosMgmtOspfAsLsaCount
Gauge32,
rosMgmtOspfAsLsaCksumSum
Unsigned32,
rosMgmtOspfStubRouterSupport
TruthValue,
rosMgmtOspfStubRouterAdvertisement
INTEGER,
rosMgmtOspfAdminDistance
Integer32,
rosMgmtOspfSpfInterval
Integer32,
rosMgmtOspfReset
INTEGER,
rosMgmtOspfExportMetric
Integer32,
rosMgmtOspfExportTag
Integer32,
rosMgmtOspfExportType
INTEGER,
rosMgmtOspfNetCounts
Integer32,
rosMgmtOspfAreaCounts
Integer32,
rosMgmtOspfNssaAreaCounts
Integer32,
rosMgmtOspfSpfCounts
Integer32,
rosMgmtOspfGlobalStatus
RowStatus,
rosMgmtOspfRedistributeRouteLimit
Integer32,
rosMgmtOspfDistanceIntra
Integer32,
rosMgmtOspfDistanceInter
Integer32,
rosMgmtOspfDistanceExtern
Integer32,
rosMgmtOspfRfc1583Compatible
TruthValue,
rosMgmtOspfSpfHode
Integer32,
rosMgmtOspfBfdAllItfs
TruthValue,
rosMgmtOspfOpaqueCapability
TruthValue,
rosMgmtOspfTECapability
TruthValue,
rosMgmtOspfTEAreaID
IpAddress,
rosMgmtOspfTERouterId
RouterID,
rosMgmtOspfGRCapability
INTEGER,
rosMgmtOspfGRPeriod
Integer32,
rosMgmtOspfGRHelper
INTEGER,
rosMgmtOspfGRHelperMaxPeriod
Integer32,
rosMgmtOspfMaximumLoadBalancing
Integer32,
rosMgmtOspfMaxMetric
Integer32,
rosMgmtOspfMaxMetricType
Integer32,
rosMgmtOspfMaxMetricTime
Integer32,
rosMgmtOspfMaxMetricTypeStartup
Integer32,
rosMgmtOspfLsdbOverflowLimit
Integer32,
rosMgmtOspfTrafficAdjustType
INTEGER,
rosMgmtOspfRouteTagValue
Unsigned32,
rosMgmtOspfRouteTagCheckDisable
TruthValue,
rosMgmtOspfDNBitSetDisableSummary
TruthValue,
rosMgmtOspfDNBitSetDisableAse
TruthValue,
rosMgmtOspfDNBitSetDisableNssa
TruthValue,
rosMgmtOspfDNBitCheckDisableSummary
TruthValue,
rosMgmtOspfDNBitCheckDisableAse
TruthValue,
rosMgmtOspfDNBitCheckDisableNssa
TruthValue,
rosMgmtOspfSpfMilliInterval
Integer32,
rosMgmtOspfSpfMilliHode
Integer32,
rosMgmtOspfLoopFreeAlt
TruthValue
}
rosMgmtOspfProcessId OBJECT-TYPE
SYNTAX ProcessID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit unsigned integer uniquely identifying the
ospf process."
::= { rosMgmtOspfGlobalEntry 1 }
rosMgmtOspfRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses.
This object is persistent and when written
the entity SHOULD save the change to non-volatile storage."
REFERENCE
"OSPF Version 2, C.1 Global parameters"
::= { rosMgmtOspfGlobalEntry 2 }
rosMgmtOspfAdminStat OBJECT-TYPE
SYNTAX EnableVar
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one interface;
'disabled' disables it on all interfaces.
This object is persistent and when written
the entity SHOULD save the change to non-volatile storage."
DEFVAL { disable }
::= { rosMgmtOspfGlobalEntry 3 }
rosMgmtOspfVersionNumber OBJECT-TYPE
SYNTAX INTEGER { version2 (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current version number of the OSPF protocol is 2."
REFERENCE
"OSPF Version 2, Title"
::= { rosMgmtOspfGlobalEntry 4 }
rosMgmtOspfAreaBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to note whether this router is an Area
Border Router."
REFERENCE
"OSPF Version 2, Section 3 Splitting the AS into
Areas"
::= { rosMgmtOspfGlobalEntry 5 }
rosMgmtOspfASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to note whether this router is configured as
an Autonomous System Border Router.
This object is persistent and when written the
entity SHOULD save the change to non-volatile storage."
REFERENCE
"OSPF Version 2, Section 3.3 Classification of
routers"
::= { rosMgmtOspfGlobalEntry 6 }
rosMgmtOspfExternLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external (LS type-5) link state
advertisements in the link state database."
REFERENCE
"OSPF Version 2, Appendix A.4.5 AS external link
advertisements"
::= { rosMgmtOspfGlobalEntry 7 }
rosMgmtOspfExternLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit sum of the LS checksums of
the external link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in a router's link state database and
to compare the link state database of two
routers. The value should be treated as unsigned
when comparing two sums of checksums."
::= { rosMgmtOspfGlobalEntry 8 }
rosMgmtOspfOriginateNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
ospfDiscontinuityTime."
::= { rosMgmtOspfGlobalEntry 9 }
rosMgmtOspfRxNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link state advertisements received
that are determined to be new instantiations.
This number does not include newer instantiations
of self-originated link state advertisements.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
ospfDiscontinuityTime."
::= { rosMgmtOspfGlobalEntry 10 }
rosMgmtOspfExtLsdbLimit OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of non-default
AS-external LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external LSAs
in a router's link state database reaches
rosMgmtOspfExtLsdbLimit, the router enters
overflow state. The router never holds more than
rosMgmtOspfExtLsdbLimit non-default AS-external LSAs
in its database. rosMgmtOspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area (i.e.,
OSPF stub areas and NSSAs are excluded).
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL { -1 }
::= { rosMgmtOspfGlobalEntry 11 }
rosMgmtOspfExitOverflowInterval OBJECT-TYPE
SYNTAX PositiveInteger
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external LSAs. When
set to 0, the router will not leave
overflow state until restarted.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 12 }
rosMgmtOspfReferenceBandwidth OBJECT-TYPE
SYNTAX Unsigned32(1..4296967)
UNITS "millionbits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reference bandwidth in millionbits/second for
calculating default interface metrics. The
default value is 100 MBPS.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
::= { rosMgmtOspfGlobalEntry 13 }
rosMgmtOspfAsLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AS-scope link state
advertisements in the AS-scope link state database."
::= { rosMgmtOspfGlobalEntry 14 }
rosMgmtOspfAsLsaCksumSum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of
the AS link state advertisements contained in the AS-scope
link state database. This sum can be used to determine
if there has been a change in a router's AS-scope link
state database, and to compare the AS-scope link state
database of two routers."
::= { rosMgmtOspfGlobalEntry 15 }
rosMgmtOspfStubRouterSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router's support for stub router functionality."
REFERENCE
"OSPF Stub Router Advertisement"
::= { rosMgmtOspfGlobalEntry 16 }
rosMgmtOspfStubRouterAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
doNotAdvertise (1),
advertise(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object controls the advertisement of
stub router LSAs by the router. The value
doNotAdvertise will result in the advertisement
of a standard router LSA and is the default value.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
::= { rosMgmtOspfGlobalEntry 17 }
rosMgmtOspfAdminDistance OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative distance of ospf process. 0 represents
administration distance of ospf is not set."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 18 }
rosMgmtOspfSpfInterval OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Delay(s) between receiving a change to SPF calculation."
DEFVAL { 2 }
::= { rosMgmtOspfGlobalEntry 19 }
rosMgmtOspfReset OBJECT-TYPE
SYNTAX INTEGER {
none (0),
general(1),
gr(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset ospf process by process ID."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 20 }
rosMgmtOspfExportMetric OBJECT-TYPE
SYNTAX Integer32 (0.. 16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default metric of imporing route into ospf process."
DEFVAL { 20 }
::= { rosMgmtOspfGlobalEntry 21 }
rosMgmtOspfExportTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default tag of importing route into ospf process."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 22 }
rosMgmtOspfExportType OBJECT-TYPE
SYNTAX INTEGER {
type1 (1),
type2 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The default type of importing route into ospf process."
DEFVAL { type2 }
::= { rosMgmtOspfGlobalEntry 23 }
rosMgmtOspfNetCounts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It bas been used to describe the total number of networks in OSPF process."
::= { rosMgmtOspfGlobalEntry 24 }
rosMgmtOspfAreaCounts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It bas been used to describe the number of areas in OSPF process."
::= { rosMgmtOspfGlobalEntry 25 }
rosMgmtOspfNssaAreaCounts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It bas been used to describe the number of NSSA areas in OSPF process."
::= { rosMgmtOspfGlobalEntry 26 }
rosMgmtOspfSpfCounts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It bas been used to describe the total number of SPF calculation in OSPF process. "
::= { rosMgmtOspfGlobalEntry 27 }
rosMgmtOspfGlobalStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfGlobalEntry 28 }
rosMgmtOspfRedistributeRouteLimit OBJECT-TYPE
SYNTAX Integer32(-1|1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the max number in importing route.-1 represents
the max number in importing route are not set."
::= { rosMgmtOspfGlobalEntry 29 }
rosMgmtOspfDistanceIntra OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative distance of ospf Intra-area routes. 0 represents
administration distance of ospf Intra-area routes are not set."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 30 }
rosMgmtOspfDistanceInter OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative distance of ospf Inter-area routes. 0 represents
administration distance of ospf Inter-area routes are not set."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 31 }
rosMgmtOspfDistanceExtern OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative distance of ospf external routes. 0 represents
administration distance of ospf external routes are not set."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 32 }
rosMgmtOspfRfc1583Compatible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ospf process compatible with RFC 1583."
DEFVAL { true }
::= { rosMgmtOspfGlobalEntry 33 }
rosMgmtOspfSpfHode OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hold time (s) between consecutive SPF calculations."
DEFVAL { 3 }
::= { rosMgmtOspfGlobalEntry 34 }
rosMgmtOspfBfdAllItfs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ospf process indicate global BFD."
DEFVAL { false }
::= { rosMgmtOspfGlobalEntry 35 }
rosMgmtOspfOpaqueCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ospf process indicate opaque capability."
DEFVAL { false }
::= { rosMgmtOspfGlobalEntry 36 }
rosMgmtOspfTECapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf process indicate TE capability."
DEFVAL { false }
::= { rosMgmtOspfGlobalEntry 37 }
rosMgmtOspfTEAreaID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfGlobalEntry 38 }
rosMgmtOspfTERouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
TE router in the area.By convention,
to ensure uniqueness,this should default to
the value of the router-id of ospf precess."
REFERENCE
"OSPF Version 2, C.1 Global parameters"
::= { rosMgmtOspfGlobalEntry 39 }
rosMgmtOspfGRCapability OBJECT-TYPE
SYNTAX INTEGER {
graceful (1),
signaling (2),
never(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Use this command to enable OSPF graceful restart
or restart signaling. If a router is not restart-enabled,
it cannot enter graceful restart mode and act as a helper."
::= { rosMgmtOspfGlobalEntry 40 }
rosMgmtOspfGRPeriod OBJECT-TYPE
SYNTAX Integer32 (1..1800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The grace period for the restarting router."
DEFVAL { 120 }
::= { rosMgmtOspfGlobalEntry 41 }
rosMgmtOspfGRHelper OBJECT-TYPE
SYNTAX INTEGER {
general (0),
never (1),
plannedonly (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the helper behavior for graceful restart."
::= { rosMgmtOspfGlobalEntry 42 }
rosMgmtOspfGRHelperMaxPeriod OBJECT-TYPE
SYNTAX Integer32 (1..1800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Help only if received grace-period is less than this value."
DEFVAL { 1800 }
::= { rosMgmtOspfGlobalEntry 43 }
rosMgmtOspfMaximumLoadBalancing OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum load-balancing paths for OSPF."
DEFVAL { 1 }
::= { rosMgmtOspfGlobalEntry 44 }
rosMgmtOspfMaxMetric OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The router announces itself as a stub router."
DEFVAL { 2 }
::= { rosMgmtOspfGlobalEntry 45 }
rosMgmtOspfMaxMetricType OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The stub router will change the cost include stub link."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 46 }
rosMgmtOspfMaxMetricTime OBJECT-TYPE
SYNTAX Integer32 (0 | 90..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time, in seconds, router-LSAs are originated with max-metric."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 47 }
rosMgmtOspfMaxMetricTypeStartup OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set maximum metric for stub links in router-LSAs on start up."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 48 }
rosMgmtOspfLsdbOverflowLimit OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the OSPF link-state database overflow limit."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 49 }
rosMgmtOspfTrafficAdjustType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
shortcut (1),
fa (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the OSPF traffic adjust feature."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 50 }
rosMgmtOspfRouteTagValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set tag of the import route whcih belongs to the vpn process."
::= { rosMgmtOspfGlobalEntry 51 }
rosMgmtOspfRouteTagCheckDisable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Block the inclusion of Tag whcih belongs to the vpn process."
::= { rosMgmtOspfGlobalEntry 52 }
rosMgmtOspfDNBitSetDisableSummary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the DN bit in an Summary LSA. The DN bit is set in an Summary LSA by default."
::= { rosMgmtOspfGlobalEntry 53 }
rosMgmtOspfDNBitSetDisableAse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the DN bit in an as-external-LSA. The DN bit is set in an as-external-LSA by default."
::= { rosMgmtOspfGlobalEntry 54 }
rosMgmtOspfDNBitSetDisableNssa OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the DN bit in an Nssa LSA. The DN bit is set in an Nssa LSA by default."
::= { rosMgmtOspfGlobalEntry 55 }
rosMgmtOspfDNBitCheckDisableSummary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Check the DN bit in an Summary LSA. The DN bit check is enabled in an Summary LSA by default."
::= { rosMgmtOspfGlobalEntry 56 }
rosMgmtOspfDNBitCheckDisableAse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Check the DN bit in an an as-external-LSA. The DN bit check is enabled in an an as-external-LSA by default."
::= { rosMgmtOspfGlobalEntry 57 }
rosMgmtOspfDNBitCheckDisableNssa OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Check the DN bit in an Nssa LSA. The DN bit check is enabled in an Nssa LSA by default."
::= { rosMgmtOspfGlobalEntry 58 }
rosMgmtOspfSpfMilliInterval OBJECT-TYPE
SYNTAX Integer32 (0..600000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Delay(ms) between receiving a change to SPF calculation."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 59 }
rosMgmtOspfSpfMilliHode OBJECT-TYPE
SYNTAX Integer32 (0..600000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hold time (ms) between consecutive SPF calculations."
DEFVAL { 0 }
::= { rosMgmtOspfGlobalEntry 60 }
rosMgmtOspfLoopFreeAlt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable OSPF Loop-Free Alternate(LFA)."
::= { rosMgmtOspfGlobalEntry 61 }
-- rosMgmtOspfAreaTable
-- The OSPF Area Table contains information
-- regarding the various areas.
rosMgmtOspfAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of the router's attached areas.
The interfaces and virtual links are configured
as part of these areas. Area 0.0.0.0, by definition,
is the backbone area."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Structure"
::= { rosMgmtOspfObjects 2 }
rosMgmtOspfAreaEntry OBJECT-TYPE
SYNTAX RosMgmtOspfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of one of the router's attached areas.
The interfaces and virtual links are configured as part of
these areas. Area 0.0.0.0, by definition, is the backbone
area.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfAreaId }
::= { rosMgmtOspfAreaTable 1 }
RosMgmtOspfAreaEntry ::=
SEQUENCE {
rosMgmtOspfAreaId
AreaID,
rosMgmtOspfAuthType
OspfAuthenticationType,
rosMgmtOspfImportAsExtern
INTEGER,
rosMgmtOspfSpfRuns
Counter32,
rosMgmtOspfAreaBdrRtrCount
Gauge32,
rosMgmtOspfAsBdrRtrCount
Gauge32,
rosMgmtOspfAreaLsaCount
Gauge32,
rosMgmtOspfAreaLsaCksumSum
Integer32,
rosMgmtOspfAreaSummary
INTEGER,
rosMgmtOspfAreaNssaTranslatorRole
INTEGER,
rosMgmtOspfAreaNssaTranslatorState
INTEGER,
rosMgmtOspfAreaNssaTranslatorStabilityInterval
PositiveInteger,
rosMgmtOspfAreaNssaTranslatorEvents
Counter32,
rosMgmtOspfAreaDefaultCost
BigMetric,
rosMgmtOspfAreaType
INTEGER,
rosMgmtOspfAreaStatus
RowStatus,
rosMgmtOspfAreaFilterInIpPrefixListName
OCTET STRING,
rosMgmtOspfAreaFilterOutIpPrefixListName
OCTET STRING,
rosMgmtOspfAreaTeCapability
TruthValue
}
rosMgmtOspfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfAreaEntry 1 }
rosMgmtOspfAuthType OBJECT-TYPE
SYNTAX OspfAuthenticationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication type specified for an area."
REFERENCE
"OSPF Version 2, Appendix D Authentication"
DEFVAL { none } -- no authentication, by default
::= { rosMgmtOspfAreaEntry 2 }
rosMgmtOspfImportAsExtern OBJECT-TYPE
SYNTAX INTEGER {
importExternal (1),
importNoExternal (2),
importNssa (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if an area is a stub area, NSSA, or standard
area. Type-5 AS-external LSAs and type-11 Opaque LSAs are
not imported into stub areas or NSSAs. NSSAs import
AS-external data as type-7 LSAs"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { importExternal }
::= { rosMgmtOspfAreaEntry 3 }
rosMgmtOspfSpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime."
::= { rosMgmtOspfAreaEntry 4 }
rosMgmtOspfAreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Area Border Routers reachable
within this area. This is initially zero and is
calculated in each Shortest Path First (SPF) pass."
::= { rosMgmtOspfAreaEntry 5 }
rosMgmtOspfAsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Autonomous System Border
Routers reachable within this area. This is
initially zero and is calculated in each SPF
pass."
::= { rosMgmtOspfAreaEntry 6 }
rosMgmtOspfAreaLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link state advertisements
in this area's link state database, excluding
AS-external LSAs."
::= { rosMgmtOspfAreaEntry 7 }
rosMgmtOspfAreaLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit sum of the link state
advertisements' LS checksums contained in this
area's link state database. This sum excludes
external (LS type-5) link state advertisements.
The sum can be used to determine if there has
been a change in a router's link state
database, and to compare the link state database of
two routers. The value should be treated as unsigned
when comparing two sums of checksums."
DEFVAL { 0 }
::= { rosMgmtOspfAreaEntry 8 }
rosMgmtOspfAreaSummary OBJECT-TYPE
SYNTAX INTEGER {
noAreaSummary (1),
sendAreaSummary (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The variable ospfAreaSummary controls the
import of summary LSAs into stub and NSSA areas.
It has no effect on other areas.
If it is noAreaSummary, the router will not
originate summary LSAs into the stub or NSSA area.
It will rely entirely on its default route.
If it is sendAreaSummary, the router will both
summarize and propagate summary LSAs."
DEFVAL { sendAreaSummary }
::= { rosMgmtOspfAreaEntry 9 }
rosMgmtOspfAreaNssaTranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always (1), candidate (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates an NSSA border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs."
DEFVAL { candidate }
::= { rosMgmtOspfAreaEntry 10 }
rosMgmtOspfAreaNssaTranslatorState OBJECT-TYPE
SYNTAX INTEGER { enabled (1),
elected (2),
disabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if and how an NSSA border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA Border
router's OspfAreaNssaExtTranslatorRole has been set to
always. When this object is set to elected, a candidate
NSSA Border router is Translating type-7 LSAs into type-5.
When this object is set to disabled, a candidate NSSA
border router is NOT translating type-7 LSAs into type-5."
::= { rosMgmtOspfAreaEntry 11 }
rosMgmtOspfAreaNssaTranslatorStabilityInterval OBJECT-TYPE
SYNTAX PositiveInteger
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties."
DEFVAL { 40 }
::= { rosMgmtOspfAreaEntry 12 }
rosMgmtOspfAreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of translator state changes
that have occurred since the last boot-up.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime."
::= { rosMgmtOspfAreaEntry 13 }
rosMgmtOspfAreaDefaultCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates the cost of default route of NSSA area or
stub area."
DEFVAL { 1 }
::= { rosMgmtOspfAreaEntry 14 }
rosMgmtOspfAreaType OBJECT-TYPE
SYNTAX INTEGER {
backbone (1),
normal (2),
stub (3),
nssa (4),
transmit (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the type of
area,area 0 indicates backbone, area that has virtual-links is
transmit area. When area is configured as stub,it's a stub area, and
same as nssa area.other areas are called normal areas."
::= { rosMgmtOspfAreaEntry 15 }
rosMgmtOspfAreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfAreaEntry 16 }
rosMgmtOspfAreaFilterInIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filter incoming summary lsa,the value of this object
indicates the name of an ip-prefix-list."
::= { rosMgmtOspfAreaEntry 17 }
rosMgmtOspfAreaFilterOutIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filter outgoing summary lsa,the value of this object
indicates the name of an ip-prefix-list."
::= { rosMgmtOspfAreaEntry 18 }
rosMgmtOspfAreaTeCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate Area TE enable state."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfAreaEntry 19 }
-- rosMgmtOspfNetWorkTable
-- The OSPF netwrok Table contains information
-- regarding the various areas.
rosMgmtOspfNetWorkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfNetWorkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of directly-connected networks which enable
the OSPF function."
::= { rosMgmtOspfObjects 3 }
rosMgmtOspfNetWorkEntry OBJECT-TYPE
SYNTAX RosMgmtOspfNetWorkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the rosMgmtOspfNetWorkTable.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfAreaId,
rosMgmtOspfNet,
rosMgmtOspfMask }
::= { rosMgmtOspfNetWorkTable 1 }
RosMgmtOspfNetWorkEntry ::=
SEQUENCE {
rosMgmtOspfNet
IpAddress,
rosMgmtOspfMask
IpAddress,
rosMgmtOspfNetWorkStatus
RowStatus
}
rosMgmtOspfNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the net or subnet indicated
by the range."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfNetWorkEntry 1 }
rosMgmtOspfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask that pertains to the net or
subnet."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfNetWorkEntry 2 }
rosMgmtOspfNetWorkStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfNetWorkEntry 3 }
--rosMgmtOspfStubAreaTable
--
--The table define ospf stub area
rosMgmtOspfStubAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfStubAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of metrics that will be advertised
by a default Area Border Router into a stub area."
REFERENCE
"OSPF Version 2, Appendix C.2, Area Parameters"
::= { rosMgmtOspfObjects 4 }
rosMgmtOspfStubAreaEntry OBJECT-TYPE
SYNTAX RosMgmtOspfStubAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
REFERENCE
"OSPF Version 2, Appendix C.2, Area Parameters"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfStubAreaId }
::= { rosMgmtOspfStubAreaTable 1 }
RosMgmtOspfStubAreaEntry ::=
SEQUENCE {
rosMgmtOspfStubAreaId
AreaID,
rosMgmtOspfStubAreaOption
TruthValue,
rosMgmtOspfStubAreaStatus
RowStatus
}
rosMgmtOspfStubAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible -- read-only since originally an
-- SMIv1 index
STATUS current
DESCRIPTION
"The 32-bit identifier for the stub area. On
creation, this can be derived from the
instance."
::= { rosMgmtOspfStubAreaEntry 1 }
rosMgmtOspfStubAreaOption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The option of STUB area.True means that ABR cann't send summary lsa to
stub area."
::= { rosMgmtOspfStubAreaEntry 2 }
rosMgmtOspfStubAreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfStubAreaEntry 3 }
--rosMgmtOspfNssaAreaTable
--
--The table define ospf nssa area
rosMgmtOspfNssaAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfNssaAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of metrics that will be advertised
by a default Area Border Router into a Nssa area."
REFERENCE
"Rfc 1587"
::= { rosMgmtOspfObjects 5 }
rosMgmtOspfNssaAreaEntry OBJECT-TYPE
SYNTAX RosMgmtOspfNssaAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a Nssa area.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
REFERENCE
"Rfc 1587"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfNssaAreaId }
::= { rosMgmtOspfNssaAreaTable 1 }
RosMgmtOspfNssaAreaEntry ::=
SEQUENCE {
rosMgmtOspfNssaAreaId
AreaID,
rosMgmtOspfNssaAreaOption
INTEGER,
rosMgmtOspfNssaAreaStatus
RowStatus
}
rosMgmtOspfNssaAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible -- read-only since originally an
-- SMIv1 index
STATUS current
DESCRIPTION
"The 32-bit identifier for the nssa area. On
creation, this can be derived from the
instance."
::= { rosMgmtOspfNssaAreaEntry 1 }
rosMgmtOspfNssaAreaOption OBJECT-TYPE
SYNTAX INTEGER {
summarysend (0),
nosummary (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The option of Nssa area. If first bit is set, Router should generate
default type-7 lsa; if second bit is set, nssa area cann't import ex-
ternal route; if third bit is set, ABR cann't send summary lsas to the
nssa area."
::= { rosMgmtOspfNssaAreaEntry 2 }
rosMgmtOspfNssaAreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfNssaAreaEntry 3 }
-- rosMgmtOspfIfTable
-- OSPF Interface Table
--
rosMgmtOspfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
It augments the ipAddrTable with OSPF specific information."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { rosMgmtOspfObjects 6 }
rosMgmtOspfIfEntry OBJECT-TYPE
SYNTAX RosMgmtOspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF interface entry describes one interface
from the viewpoint of OSPF.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfAddressLessIf }
::= { rosMgmtOspfIfTable 1 }
RosMgmtOspfIfEntry ::=
SEQUENCE {
rosMgmtOspfAddressLessIf
InterfaceIndexOrZero,
rosMgmtOspfIfIpAddress
IpAddress,
rosMgmtOspfIfAreaId
AreaID,
rosMgmtOspfIfType
INTEGER,
rosMgmtOspfIfAdminStat
Status,
rosMgmtOspfIfRtrPriority
DesignatedRouterPriority,
rosMgmtOspfIfTransitDelay
Integer32,
rosMgmtOspfIfRetransInterval
Integer32,
rosMgmtOspfIfHelloInterval
Integer32,
rosMgmtOspfIfRtrDeadInterval
Integer32,
rosMgmtOspfIfPollInterval
Integer32,
rosMgmtOspfIfState
INTEGER,
rosMgmtOspfIfDesignatedRouter
IpAddress,
rosMgmtOspfIfBackupDesignatedRouter
IpAddress,
rosMgmtOspfIfEvents
Counter32,
rosMgmtOspfIfAuthKeyId
Integer32,
rosMgmtOspfIfAuthSimpleKeyType
INTEGER,
rosMgmtOspfIfAuthMd5KeyType
INTEGER,
rosMgmtOspfIfAuthSimpleKey
OCTET STRING,
rosMgmtOspfIfAuthMd5Key
OCTET STRING,
rosMgmtOspfIfAuthKeyChain
OCTET STRING,
rosMgmtOspfIfAuthType
OspfAuthenticationType,
rosMgmtOspfIfLsaCount
Gauge32,
rosMgmtOspfIfLsaCksumSum
Unsigned32,
rosMgmtOspfIfDesignatedRouterId
RouterID,
rosMgmtOspfIfBackupDesignatedRouterId
RouterID,
rosMgmtOspfIfPassive
EnableVar,
rosMgmtOspfIfMtu
EnableVar,
rosMgmtOspfIfMetric
Metric,
rosMgmtOspfIfBfd
EnableVar,
rosMgmtOspfIfGRResync
Integer32
}
rosMgmtOspfAddressLessIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; this
variable takes the value 0 on interfaces with
IP addresses and the corresponding value of
ifIndex for interfaces having no IP address."
::= { rosMgmtOspfIfEntry 1 }
rosMgmtOspfIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { rosMgmtOspfIfEntry 2 }
rosMgmtOspfIfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { rosMgmtOspfIfEntry 3 }
rosMgmtOspfIfType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
pointToPoint (1),
broadcast (2),
nbma (3),
pointToMultipoint (4),
virtuallink (5),
loopback (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType.
Broadcast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'."
DEFVAL {broadcast}
::= { rosMgmtOspfIfEntry 4 }
rosMgmtOspfIfAdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is
external to OSPF."
DEFVAL { enabled }
::= { rosMgmtOspfIfEntry 5 }
rosMgmtOspfIfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligible
to become the designated router on this particular
network. In the event of a tie in this value,
routers will use their Router ID as a tie breaker."
DEFVAL { 1 }
::= { rosMgmtOspfIfEntry 6 }
rosMgmtOspfIfTransitDelay OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second."
DEFVAL { 1 }
::= { rosMgmtOspfIfEntry 7 }
rosMgmtOspfIfRetransInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and Link State request packets.
Note that minimal value SHOULD be 1 second."
DEFVAL { 5 }
::= { rosMgmtOspfIfEntry 8 }
rosMgmtOspfIfHelloInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the Hello packets
that the router sends on the interface. This value must be
the same for all routers attached to a common network."
DEFVAL { 10 }
::= { rosMgmtOspfIfEntry 9 }
rosMgmtOspfIfRtrDeadInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
value must be the same for all routers attached to a common
network."
DEFVAL { 40 }
::= { rosMgmtOspfIfEntry 10 }
rosMgmtOspfIfPollInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The larger time interval, in seconds, between the Hello
packets sent to an inactive non-broadcast multi-access
neighbor."
DEFVAL { 120 }
::= { rosMgmtOspfIfEntry 11 }
rosMgmtOspfIfState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
loopback (2),
waiting (3),
pointToPoint (4),
designatedRouter (5),
backupDesignatedRouter (6),
otherDesignatedRouter (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface State."
DEFVAL { down }
::= { rosMgmtOspfIfEntry 12 }
rosMgmtOspfIfDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the designated router."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { rosMgmtOspfIfEntry 13 }
rosMgmtOspfIfBackupDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the backup designated
router."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { rosMgmtOspfIfEntry 14 }
rosMgmtOspfIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime."
::= { rosMgmtOspfIfEntry 15 }
rosMgmtOspfIfAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The key id of md5 authentication."
DEFVAL { 0 }
::= { rosMgmtOspfIfEntry 16 }
rosMgmtOspfIfAuthSimpleKeyType OBJECT-TYPE
SYNTAX INTEGER {plain(0), cipher(7)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of password for simple authentication."
DEFVAL { 0 }
::= { rosMgmtOspfIfEntry 17 }
rosMgmtOspfIfAuthMd5KeyType OBJECT-TYPE
SYNTAX INTEGER {plain(0), cipher(7)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of password for md5 authentication."
DEFVAL { 0 }
::= { rosMgmtOspfIfEntry 18 }
rosMgmtOspfIfAuthSimpleKey OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password used as an OSPF
authentication key when simple password security
is enabled."
DEFVAL {''h}
::= { rosMgmtOspfIfEntry 19 }
rosMgmtOspfIfAuthMd5Key OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password used as an OSPF
authentication key when md5 security
is enabled."
DEFVAL {''h}
::= { rosMgmtOspfIfEntry 20 }
rosMgmtOspfIfAuthKeyChain OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of key chain."
DEFVAL {''h}
::= { rosMgmtOspfIfEntry 21 }
rosMgmtOspfIfAuthType OBJECT-TYPE
SYNTAX OspfAuthenticationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication type specified for an interface.
Note that this object can be used to engage
in significant attacks against an OSPF router."
REFERENCE
"OSPF Version 2, Appendix D Authentication"
DEFVAL { none } -- no authentication, by default
::= { rosMgmtOspfIfEntry 22 }
rosMgmtOspfIfLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link-local link state advertisements
in this interface's link-local link state database."
::= { rosMgmtOspfIfEntry 23 }
rosMgmtOspfIfLsaCksumSum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link State
Advertisements' LS checksums contained in this
interface's link-local link state database.
The sum can be used to determine if there has
been a change in the interface's link state
database and to compare the interface link state
database of routers attached to the same subnet."
::= { rosMgmtOspfIfEntry 24 }
rosMgmtOspfIfDesignatedRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the designated router."
::= { rosMgmtOspfIfEntry 25 }
rosMgmtOspfIfBackupDesignatedRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the backup designated router."
::= { rosMgmtOspfIfEntry 26 }
rosMgmtOspfIfPassive OBJECT-TYPE
SYNTAX EnableVar
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate the interface is a passive interface."
DEFVAL {disable}
::= { rosMgmtOspfIfEntry 27 }
rosMgmtOspfIfMtu OBJECT-TYPE
SYNTAX EnableVar
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate ignore the interface's mtu."
DEFVAL {disable}
::= { rosMgmtOspfIfEntry 28 }
rosMgmtOspfIfMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric of using this Type of Service on
this interface. The default value of the TOS 0
metric is 10^8 / ifSpeed."
::= { rosMgmtOspfIfEntry 29 }
rosMgmtOspfIfBfd OBJECT-TYPE
SYNTAX EnableVar
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate the interface enables BFD function."
DEFVAL {disable}
::= { rosMgmtOspfIfEntry 30 }
rosMgmtOspfIfGRResync OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval period starts from the time a
restart signal is received from a neighbor."
DEFVAL { 40 }
::= { rosMgmtOspfIfEntry 31 }
--rosMgmtOspfVirtIfTable
--
--OSPF Virtual Interface Table
rosMgmtOspfVirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfVirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about this router's virtual interfaces
that the OSPF Process is configured to carry on."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link
parameters"
::= { rosMgmtOspfObjects 7 }
rosMgmtOspfVirtIfEntry OBJECT-TYPE
SYNTAX RosMgmtOspfVirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single virtual interface.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfVirtIfAreaId,
rosMgmtOspfVirtIfNeighbor }
::= { rosMgmtOspfVirtIfTable 1 }
RosMgmtOspfVirtIfEntry ::=
SEQUENCE {
rosMgmtOspfVirtIfAreaId
AreaID,
rosMgmtOspfVirtIfNeighbor
RouterID,
rosMgmtOspfVirtIfTransitDelay
UpToMaxAge,
rosMgmtOspfVirtIfRetransInterval
UpToMaxAge,
rosMgmtOspfVirtIfHelloInterval
HelloRange,
rosMgmtOspfVirtIfRtrDeadInterval
PositiveInteger,
rosMgmtOspfVirtIfState
INTEGER,
rosMgmtOspfVirtIfEvents
Counter32,
rosMgmtOspfVirtIfAuthKeyId
Integer32,
rosMgmtOspfVirtIfAuthSimpleKeyType
INTEGER,
rosMgmtOspfVirtIfAuthMd5KeyType
INTEGER,
rosMgmtOspfVirtIfAuthSimpleKey
OCTET STRING,
rosMgmtOspfVirtIfAuthMd5Key
OCTET STRING,
rosMgmtOspfVirtIfAuthKeyChain
OCTET STRING,
rosMgmtOspfVirtIfAuthType
OspfAuthenticationType,
rosMgmtOspfVirtIfLsaCount
Gauge32,
rosMgmtOspfVirtIfLsaCksumSum
Unsigned32,
rosMgmtOspfVirtIfCost
Integer32,
rosMgmtOspfVirtIfStatus
RowStatus
}
rosMgmtOspfVirtIfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit area that the virtual link
traverses. By definition, this is not 0.0.0.0."
::= { rosMgmtOspfVirtIfEntry 1 }
rosMgmtOspfVirtIfNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the virtual neighbor."
::= { rosMgmtOspfVirtIfEntry 2 }
rosMgmtOspfVirtIfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a Link State update packet over this
interface. Note that the minimal value SHOULD be
1 second."
DEFVAL { 1 }
::= { rosMgmtOspfVirtIfEntry 3 }
rosMgmtOspfVirtIfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link state
avertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State request packets. This
value should be well over the expected
round-trip time. Note that the minimal value SHOULD be
1 second."
DEFVAL { 5 }
::= { rosMgmtOspfVirtIfEntry 4 }
rosMgmtOspfVirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor."
DEFVAL { 10 }
::= { rosMgmtOspfVirtIfEntry 5 }
rosMgmtOspfVirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neighbor."
DEFVAL { 60 }
::= { rosMgmtOspfVirtIfEntry 6 }
rosMgmtOspfVirtIfState OBJECT-TYPE
SYNTAX INTEGER {
down (1), -- these use the same encoding
pointToPoint (4) -- as the rosMgmtOspfIfTable
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF virtual interface states."
DEFVAL { down }
::= { rosMgmtOspfVirtIfEntry 7 }
rosMgmtOspfVirtIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state changes or error events on
this virtual link.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime."
::= { rosMgmtOspfVirtIfEntry 8 }
rosMgmtOspfVirtIfAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The key id of md5 authentication."
DEFVAL { 0 }
::= { rosMgmtOspfVirtIfEntry 9 }
rosMgmtOspfVirtIfAuthSimpleKeyType OBJECT-TYPE
SYNTAX INTEGER {plain(0), cipher(7)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of password for simple authentication."
DEFVAL { 0 }
::= { rosMgmtOspfVirtIfEntry 10 }
rosMgmtOspfVirtIfAuthMd5KeyType OBJECT-TYPE
SYNTAX INTEGER {plain(0), cipher(7)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of password for md5 authentication."
DEFVAL { 0 }
::= { rosMgmtOspfVirtIfEntry 11 }
rosMgmtOspfVirtIfAuthSimpleKey OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password used as an OSPF
authentication key when simple password security
is enabled."
DEFVAL {''h}
::= { rosMgmtOspfVirtIfEntry 12 }
rosMgmtOspfVirtIfAuthMd5Key OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password used as an OSPF
authentication key when md5 security
is enabled."
DEFVAL {''h}
::= { rosMgmtOspfVirtIfEntry 13 }
rosMgmtOspfVirtIfAuthKeyChain OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of key chain."
DEFVAL {''h}
::= { rosMgmtOspfVirtIfEntry 14 }
rosMgmtOspfVirtIfAuthType OBJECT-TYPE
SYNTAX OspfAuthenticationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication type specified for a virtual interface.
Note that this object can be used to engage
in significant attacks against an OSPF router."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { none } -- no authentication, by default
::= { rosMgmtOspfVirtIfEntry 15 }
rosMgmtOspfVirtIfLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link-local link state advertisements
in this virtual interface's link-local link state database."
::= { rosMgmtOspfVirtIfEntry 16 }
rosMgmtOspfVirtIfLsaCksumSum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the link state
advertisements' LS checksums contained in this
virtual interface's link-local link state database.
The sum can be used to determine if there has
been a change in the virtual interface's link state
database, and to compare the virtual interface
link state database of the virtual neighbors."
::= { rosMgmtOspfVirtIfEntry 17 }
rosMgmtOspfVirtIfCost OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the cost of
virtual interface."
DEFVAL { 1 }
::= { rosMgmtOspfVirtIfEntry 18 }
rosMgmtOspfVirtIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfVirtIfEntry 19 }
--rosMgmtOspfNbrTable
--
--OSPF Neighbor Table
rosMgmtOspfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all non-virtual neighbors
in the locality of the OSPF router."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { rosMgmtOspfObjects 8 }
rosMgmtOspfNbrEntry OBJECT-TYPE
SYNTAX RosMgmtOspfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single neighbor.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfNbrIpAddr,
rosMgmtOspfNbrAddressLessIndex }
::= { rosMgmtOspfNbrTable 1 }
RosMgmtOspfNbrEntry ::=
SEQUENCE {
rosMgmtOspfNbrIpAddr
IpAddress,
rosMgmtOspfNbrAddressLessIndex
InterfaceIndexOrZero,
rosMgmtOspfNbrRtrId
RouterID,
rosMgmtOspfNbrOptions
Integer32,
rosMgmtOspfNbrPriority
DesignatedRouterPriority,
rosMgmtOspfNbrState
INTEGER,
rosMgmtOspfNbrEvents
Counter32,
rosMgmtOspfNbrLsRetransQLen
Gauge32,
rosMgmtOspfNbrMode
INTEGER
}
rosMgmtOspfNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only -- read-only since originally an
-- SMIv1 index
STATUS current
DESCRIPTION
"The IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the
address of another of the neighbor's interfaces."
::= { rosMgmtOspfNbrEntry 1 }
rosMgmtOspfNbrAddressLessIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only -- read-only since originally an
-- SMIv1 index
STATUS current
DESCRIPTION
"On an interface having an IP address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance."
::= { rosMgmtOspfNbrEntry 2 }
rosMgmtOspfNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit integer (represented as a type
IpAddress) uniquely identifying the neighboring
router in the Autonomous System."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { rosMgmtOspfNbrEntry 3 }
rosMgmtOspfNbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit mask corresponding to the neighbor's
options field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external
information; if zero, it is a stub area.
Bit 2, if set, indicates that the system is
capable of routing IP multicast datagrams, that is
that it implements the multicast extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type-7 external advertisements, which
are translated into type-5 external advertisements
at NSSA borders."
REFERENCE
"OSPF Version 2, Section 12.1.2 Options"
DEFVAL { 0 }
::= { rosMgmtOspfNbrEntry 4 }
rosMgmtOspfNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network."
DEFVAL { 1 }
::= { rosMgmtOspfNbrEntry 5 }
rosMgmtOspfNbrState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the relationship with this neighbor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
DEFVAL { down }
::= { rosMgmtOspfNbrEntry 6 }
rosMgmtOspfNbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this neighbor relationship
has changed state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime."
::= { rosMgmtOspfNbrEntry 7 }
rosMgmtOspfNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { rosMgmtOspfNbrEntry 8 }
rosMgmtOspfNbrMode OBJECT-TYPE
SYNTAX INTEGER {
slave (1),
master (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the master-slave mode of
neighbor. "
DEFVAL { slave }
::= { rosMgmtOspfNbrEntry 9 }
--rosMgmtOspfNbmaCfgNbrTable
--
--OSPF Nbma Network Configed Neighbor Table
rosMgmtOspfNbmaCfgNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfNbmaCfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all configured neigbors on nbma network."
::= { rosMgmtOspfObjects 9 }
rosMgmtOspfNbmaCfgNbrEntry OBJECT-TYPE
SYNTAX RosMgmtOspfNbmaCfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a Configured neighbor.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfNbmaCfgNbrIpAddr }
::= { rosMgmtOspfNbmaCfgNbrTable 1 }
RosMgmtOspfNbmaCfgNbrEntry ::=
SEQUENCE {
rosMgmtOspfNbmaCfgNbrIpAddr
IpAddress,
rosMgmtOspfNbmaCfgNbrPriority
DesignatedRouterPriority,
rosMgmtOspfNbmaCfgNbrStatus
RowStatus
}
rosMgmtOspfNbmaCfgNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the
address of another of the neighbor's interfaces."
::= { rosMgmtOspfNbmaCfgNbrEntry 1 }
rosMgmtOspfNbmaCfgNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network."
DEFVAL { 1 }
::= { rosMgmtOspfNbmaCfgNbrEntry 2 }
rosMgmtOspfNbmaCfgNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfNbmaCfgNbrEntry 3 }
--rosMgmtOspfVirtNbrTable
--
--OSPF Virtual Neighbor Table
rosMgmtOspfVirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfVirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes all virtual neighbors.
Since virtual links are configured
in the Virtual Interface Table, this table is read-only."
REFERENCE
"OSPF Version 2, Section 15 Virtual Links"
::= { rosMgmtOspfObjects 10 }
rosMgmtOspfVirtNbrEntry OBJECT-TYPE
SYNTAX RosMgmtOspfVirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual neighbor information."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfVirtNbrArea,
rosMgmtOspfVirtNbrRtrId }
::= { rosMgmtOspfVirtNbrTable 1 }
RosMgmtOspfVirtNbrEntry ::=
SEQUENCE {
rosMgmtOspfVirtNbrArea
AreaID,
rosMgmtOspfVirtNbrRtrId
RouterID,
rosMgmtOspfVirtNbrIpAddr
IpAddress,
rosMgmtOspfVirtNbrOptions
Integer32,
rosMgmtOspfVirtNbrState
INTEGER,
rosMgmtOspfVirtNbrEvents
Counter32,
rosMgmtOspfVirtNbrLsRetransQLen
Gauge32,
rosMgmtOspfVirtNbrLessIf
Integer32,
rosMgmtOspfVirtNbrMode
INTEGER
}
rosMgmtOspfVirtNbrArea OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only -- read-only since originally an
-- SMIv1 index
STATUS current
DESCRIPTION
"The Transit Area Identifier."
::= { rosMgmtOspfVirtNbrEntry 1 }
rosMgmtOspfVirtNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only -- read-only since originally an
-- SMIv1 index
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System."
::= { rosMgmtOspfVirtNbrEntry 2 }
rosMgmtOspfVirtNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address this virtual neighbor is using."
::= { rosMgmtOspfVirtNbrEntry 3 }
rosMgmtOspfVirtNbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit mask corresponding to the neighbor's
options field.
Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 2, if set, indicates that the system is
network multicast capable, i.e., that it
implements OSPF multicast routing."
::= { rosMgmtOspfVirtNbrEntry 4 }
rosMgmtOspfVirtNbrState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the virtual neighbor relationship."
::= { rosMgmtOspfVirtNbrEntry 5 }
rosMgmtOspfVirtNbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this virtual link has
changed its state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime."
::= { rosMgmtOspfVirtNbrEntry 6 }
rosMgmtOspfVirtNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { rosMgmtOspfVirtNbrEntry 7 }
rosMgmtOspfVirtNbrLessIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the out interface index of
this virtual neighbor."
::= { rosMgmtOspfVirtNbrEntry 8 }
rosMgmtOspfVirtNbrMode OBJECT-TYPE
SYNTAX INTEGER {
slave (1),
master (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the master-slave mode of
virtual neighbor. "
DEFVAL { slave }
::= { rosMgmtOspfVirtNbrEntry 9 }
-- The OSPF Area Aggregate Table
--
-- This table replaces the OSPF Area Summary Table, being an
-- extension of that for CIDR routers.
rosMgmtOspfAreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area Aggregate Table acts as an adjunct
to the Area Table. It describes those address aggregates
that are configured to be propagated from an area.
Its purpose is to reduce the amount of information
that is known beyond an Area's borders.
It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfObjects 11 }
rosMgmtOspfAreaAggregateEntry OBJECT-TYPE
SYNTAX RosMgmtOspfAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single area aggregate entry.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfAreaAggregateAreaID,
rosMgmtOspfAreaAggregateLsdbType,
rosMgmtOspfAreaAggregateNet,
rosMgmtOspfAreaAggregateMask }
::= { rosMgmtOspfAreaAggregateTable 1 }
RosMgmtOspfAreaAggregateEntry ::=
SEQUENCE {
rosMgmtOspfAreaAggregateAreaID
AreaID,
rosMgmtOspfAreaAggregateLsdbType
INTEGER,
rosMgmtOspfAreaAggregateNet
IpAddress,
rosMgmtOspfAreaAggregateMask
IpAddress,
rosMgmtOspfAreaAggregateEffect
INTEGER,
rosMgmtOspfAreaAggregateStatus
RowStatus
}
rosMgmtOspfAreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The area within which the address aggregate is to be
found."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfAreaAggregateEntry 1 }
rosMgmtOspfAreaAggregateLsdbType OBJECT-TYPE
SYNTAX INTEGER {
summaryLink (3),
nssaExternalLink (7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address aggregate. This field
specifies the Lsdb type that this address
aggregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { rosMgmtOspfAreaAggregateEntry 2 }
rosMgmtOspfAreaAggregateNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the net or subnet indicated
by the range."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfAreaAggregateEntry 3 }
rosMgmtOspfAreaAggregateMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask that pertains to the net or
subnet."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfAreaAggregateEntry 4 }
rosMgmtOspfAreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER {
advertiseMatching (1),
doNotAdvertiseMatching (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Subnets subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching) or result in the subnet's not
being advertised at all outside the area."
DEFVAL { advertiseMatching }
::= { rosMgmtOspfAreaAggregateEntry 5 }
rosMgmtOspfAreaAggregateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfAreaAggregateEntry 6 }
-- The OSPF External Aggregate Table
--
rosMgmtOspfExternalAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfExternalAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one."
::= { rosMgmtOspfObjects 12 }
rosMgmtOspfExternalAggregateEntry OBJECT-TYPE
SYNTAX RosMgmtOspfExternalAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single external aggregate entry.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfExternalAggregateNet,
rosMgmtOspfExternalAggregateMask }
::= { rosMgmtOspfExternalAggregateTable 1 }
RosMgmtOspfExternalAggregateEntry ::=
SEQUENCE {
rosMgmtOspfExternalAggregateNet
IpAddress,
rosMgmtOspfExternalAggregateMask
IpAddress,
rosMgmtOspfExternalAggregateEffect
INTEGER,
rosMgmtOspfExternalAggregateCost
BigMetric,
rosMgmtOspfExternalAggregateStatus
RowStatus
}
rosMgmtOspfExternalAggregateNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the net or subnet indicated
by the range."
::= { rosMgmtOspfExternalAggregateEntry 1 }
rosMgmtOspfExternalAggregateMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask that pertains to the net or
subnet."
::= { rosMgmtOspfExternalAggregateEntry 2 }
rosMgmtOspfExternalAggregateEffect OBJECT-TYPE
SYNTAX INTEGER {
doNotAdvertise (1),
advertise(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the advertisement of external route summary."
DEFVAL { advertise }
::= { rosMgmtOspfExternalAggregateEntry 3 }
rosMgmtOspfExternalAggregateCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates the cost of aggregated external route, 16777215
represents the cost is not set, the metric of route while decided
by ospf itself according to the route type."
DEFVAL { 1 }
::= { rosMgmtOspfExternalAggregateEntry 4 }
rosMgmtOspfExternalAggregateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfExternalAggregateEntry 5 }
--rosMgmtOspfLsdbTable
--
--The table define link state database
rosMgmtOspfLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to."
REFERENCE
"OSPF Version 2, Section 12 Link State Advertisements"
::= { rosMgmtOspfObjects 13 }
rosMgmtOspfLsdbEntry OBJECT-TYPE
SYNTAX RosMgmtOspfLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single link state advertisement."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfLsdbAreaId,
rosMgmtOspfLsdbType,
rosMgmtOspfLsdbLsId,
rosMgmtOspfLsdbRouterId }
::= { rosMgmtOspfLsdbTable 1 }
RosMgmtOspfLsdbEntry ::=
SEQUENCE {
rosMgmtOspfLsdbAreaId
AreaID,
rosMgmtOspfLsdbType
INTEGER,
rosMgmtOspfLsdbLsId
IpAddress,
rosMgmtOspfLsdbRouterId
RouterID,
rosMgmtOspfLsdbSequence
Integer32,
rosMgmtOspfLsdbAge
Integer32,
rosMgmtOspfLsdbChecksum
Integer32,
rosMgmtOspfLsdbAdvertisement
OCTET STRING
}
rosMgmtOspfLsdbAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit identifier of the area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { rosMgmtOspfLsdbEntry 1 }
rosMgmtOspfLsdbType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5), -- but see rosMgmtOspfAsLsdbTable
multicastLink (6),
nssaExternalLink (7),
linkOpaqueLink (9),
areaOpaqueLink (10),
asOpaqueLink (11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertisement
format.
Note: External link state advertisements are permitted
for backward compatibility, but should be displayed
in the rosMgmtOspfAsLsdbTable rather than here."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { rosMgmtOspfLsdbEntry 2 }
rosMgmtOspfLsdbLsId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rosMgmtOspfLsdbEntry 3 }
rosMgmtOspfLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rosMgmtOspfLsdbEntry 4 }
rosMgmtOspfLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate Link State
Advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number, the more recent
the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { rosMgmtOspfLsdbEntry 5 }
rosMgmtOspfLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge, except when
-- doNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state advertisement
in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rosMgmtOspfLsdbEntry 6 }
rosMgmtOspfLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the
Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rosMgmtOspfLsdbEntry 7 }
rosMgmtOspfLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire link state advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size."
REFERENCE
"OSPF Version 2, Section 12 Link State Advertisements"
::= { rosMgmtOspfLsdbEntry 8 }
--rosMgmtOspfAsLsdbTable
--
--OSPF Link State Database, External
rosMgmtOspfAsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfAsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's AS-scope LSA link state database.
The database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
This table is identical to the OSPF LSDB Table
in format, but contains only AS-scope Link State
Advertisements. The purpose is to allow AS-scope
LSAs to be displayed once for the router rather
than once in each non-stub area."
REFERENCE
"OSPF Version 2, Section 12 Link State
Advertisements"
::= { rosMgmtOspfObjects 14 }
rosMgmtOspfAsLsdbEntry OBJECT-TYPE
SYNTAX RosMgmtOspfAsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single link state advertisement."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfAsLsdbType,
rosMgmtOspfAsLsdbLsId,
rosMgmtOspfAsLsdbRouterId }
::= { rosMgmtOspfAsLsdbTable 1 }
RosMgmtOspfAsLsdbEntry ::=
SEQUENCE {
rosMgmtOspfAsLsdbType
INTEGER,
rosMgmtOspfAsLsdbLsId
IpAddress,
rosMgmtOspfAsLsdbRouterId
RouterID,
rosMgmtOspfAsLsdbSequence
Integer32,
rosMgmtOspfAsLsdbAge
Integer32,
rosMgmtOspfAsLsdbChecksum
Integer32,
rosMgmtOspfAsLsdbAdvertisement
OCTET STRING
}
rosMgmtOspfAsLsdbType OBJECT-TYPE
SYNTAX INTEGER { asExternalLink (5) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate
advertisement format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { rosMgmtOspfAsLsdbEntry 1 }
rosMgmtOspfAsLsdbLsId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { rosMgmtOspfAsLsdbEntry 2 }
rosMgmtOspfAsLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32-bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { rosMgmtOspfAsLsdbEntry 3 }
rosMgmtOspfAsLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number, the more recent
the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { rosMgmtOspfAsLsdbEntry 4 }
rosMgmtOspfAsLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge, except when
-- doNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { rosMgmtOspfAsLsdbEntry 5 }
rosMgmtOspfAsLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { rosMgmtOspfAsLsdbEntry 6 }
rosMgmtOspfAsLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire link state advertisement, including
its header."
REFERENCE
"OSPF Version 2, Section 12 Link State
Advertisements.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size."
::= { rosMgmtOspfAsLsdbEntry 7 }
--rosMgmtOspfAreaLsaCountTable
--
--OSPF Area LSA Counter Table
rosMgmtOspfAreaLsaCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfAreaLsaCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains per-area, per-LSA-type counters"
::= { rosMgmtOspfObjects 15 }
rosMgmtOspfAreaLsaCountEntry OBJECT-TYPE
SYNTAX RosMgmtOspfAreaLsaCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with a number of link advertisements
of a given type for a given area."
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfAreaLsaCountAreaId,
rosMgmtOspfAreaLsaCountLsaType }
::= { rosMgmtOspfAreaLsaCountTable 1 }
RosMgmtOspfAreaLsaCountEntry ::=
SEQUENCE {
rosMgmtOspfAreaLsaCountAreaId
AreaID,
rosMgmtOspfAreaLsaCountLsaType
INTEGER,
rosMgmtOspfAreaLsaCountNumber
Gauge32
}
rosMgmtOspfAreaLsaCountAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry Area ID."
::= { rosMgmtOspfAreaLsaCountEntry 1 }
rosMgmtOspfAreaLsaCountLsaType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
nssaExternalLink (7),
linkOpaqueLink (9),
areaOpaqueLink (10)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry LSA type."
::= { rosMgmtOspfAreaLsaCountEntry 2 }
rosMgmtOspfAreaLsaCountNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of LSAs of a given type for a given area."
::= { rosMgmtOspfAreaLsaCountEntry 3 }
-- rosMgmtOspfRedistributeTable
--
rosMgmtOspfRedistributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfRedistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Import external route to ospf protocol."
::= { rosMgmtOspfObjects 16 }
rosMgmtOspfRedistributeEntry OBJECT-TYPE
SYNTAX RosMgmtOspfRedistributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfRedistributeTable"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfRedistributeProtocol,
rosMgmtOspfRedistributeProcessId }
::= { rosMgmtOspfRedistributeTable 1 }
RosMgmtOspfRedistributeEntry ::=
SEQUENCE {
rosMgmtOspfRedistributeProtocol
INTEGER,
rosMgmtOspfRedistributeProcessId
ProcessID,
rosMgmtOspfRedistributeCost
BigMetric,
rosMgmtOspfRedistributeType
INTEGER,
rosMgmtOspfRedistributeStatus
RowStatus,
rosMgmtOspfRedistributeRouteMapName
OCTET STRING,
rosMgmtOspfRedistributeTag
Unsigned32
}
rosMgmtOspfRedistributeProtocol OBJECT-TYPE
SYNTAX INTEGER { -- RFC1213 route proto define
other(1), -- none of the following
-- non-protocol information,
-- e.g., manually configured
local(2), -- entries
-- set via a network
netmgmt(3), -- management protocol
-- obtained via ICMP,
icmp(4), -- e.g., Redirect
-- the remaining values are
-- all gateway routing
-- protocols
egp(5),
ggp(6),
hello(7),
rip(8),
isis(9),
esis(10),
ciscoIgrp(11),
bbnSpfIgp(12),
ospf(13),
bgp(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route protocol to be redistributed."
::= { rosMgmtOspfRedistributeEntry 1 }
rosMgmtOspfRedistributeProcessId OBJECT-TYPE
SYNTAX ProcessID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process id of redistributed route protocol, only support ospf."
::= { rosMgmtOspfRedistributeEntry 2 }
rosMgmtOspfRedistributeCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates the cost of redistributed route, 16777215 represents
the cost is not set, the metric of route while decided by
ospf itself according to the route type."
DEFVAL { 1 }
::= { rosMgmtOspfRedistributeEntry 3 }
rosMgmtOspfRedistributeType OBJECT-TYPE
SYNTAX INTEGER { e1(1),e2(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of external route."
DEFVAL { e2 }
::= { rosMgmtOspfRedistributeEntry 4 }
rosMgmtOspfRedistributeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfRedistributeEntry 5 }
rosMgmtOspfRedistributeRouteMapName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify a route-map."
::= { rosMgmtOspfRedistributeEntry 6 }
rosMgmtOspfRedistributeTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set tag of route."
::= { rosMgmtOspfRedistributeEntry 7 }
--rosMgmtOspfDefaultInfoTable
--
rosMgmtOspfDefaultInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfDefaultInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table generate or delete the default route."
::= { rosMgmtOspfObjects 17 }
rosMgmtOspfDefaultInfoEntry OBJECT-TYPE
SYNTAX RosMgmtOspfDefaultInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfDefaultInfoTable"
INDEX { rosMgmtOspfProcessId }
::= { rosMgmtOspfDefaultInfoTable 1 }
RosMgmtOspfDefaultInfoEntry ::=
SEQUENCE {
rosMgmtOspfDefaultInfoAlways
TruthValue,
rosMgmtOspfDefaultInfoCost
BigMetric,
rosMgmtOspfDefaultInfoType
INTEGER,
rosMgmtOspfDefaultInfoStatus
RowStatus
}
rosMgmtOspfDefaultInfoAlways OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether always inform default route."
DEFVAL { false }
::= { rosMgmtOspfDefaultInfoEntry 1 }
rosMgmtOspfDefaultInfoCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates the default cost of route, 16777215 represents
the default cost is not set, the metric of route while decided by
ospf itself according to the route type."
DEFVAL { 1 }
::= { rosMgmtOspfDefaultInfoEntry 2 }
rosMgmtOspfDefaultInfoType OBJECT-TYPE
SYNTAX INTEGER { e1(1),e2(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It indicates the type of default route."
DEFVAL { e2 }
::= { rosMgmtOspfDefaultInfoEntry 3 }
rosMgmtOspfDefaultInfoStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfDefaultInfoEntry 4 }
-- rosMgmtOspfPacketIoStatisTable
--
rosMgmtOspfPacketIoStatisTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfPacketIoStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to storage all kinds of
input and output packet statistical information of
OSPF process."
::= { rosMgmtOspfObjects 18 }
rosMgmtOspfPacketIoStatisEntry OBJECT-TYPE
SYNTAX RosMgmtOspfPacketIoStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfPacketIoStatisTable"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfPacketIoStatisIoType,
rosMgmtOspfPacketIoStatisPktType }
::= { rosMgmtOspfPacketIoStatisTable 1 }
RosMgmtOspfPacketIoStatisEntry ::=
SEQUENCE {
rosMgmtOspfPacketIoStatisIoType
INTEGER,
rosMgmtOspfPacketIoStatisPktType
INTEGER,
rosMgmtOspfPacketIoStatisNumber
Integer32
}
rosMgmtOspfPacketIoStatisIoType OBJECT-TYPE
SYNTAX INTEGER {
input (1),
output (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It has been used to describe the IO direction of
packet."
::= { rosMgmtOspfPacketIoStatisEntry 1 }
rosMgmtOspfPacketIoStatisPktType OBJECT-TYPE
SYNTAX INTEGER {
hello (1),
dbDescript (2),
lsReq (3),
lsUpdate (4),
lsAck (5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It has been used to describe the type of
OSPF packet."
::= { rosMgmtOspfPacketIoStatisEntry 2 }
rosMgmtOspfPacketIoStatisNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number indicates the number of specified type of
packets on input or output direction."
::= { rosMgmtOspfPacketIoStatisEntry 3 }
-- rosMgmtOspfRouteTable
--
rosMgmtOspfRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to storage OSPF calculation of routing table."
::= { rosMgmtOspfObjects 19 }
rosMgmtOspfRouteEntry OBJECT-TYPE
SYNTAX RosMgmtOspfRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfRouteTable"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfRouteDest,
rosMgmtOspfRouteMask,
rosMgmtOspfRouteType }
::= { rosMgmtOspfRouteTable 1 }
RosMgmtOspfRouteEntry ::=
SEQUENCE {
rosMgmtOspfRouteDest
IpAddress,
rosMgmtOspfRouteMask
IpAddress,
rosMgmtOspfRouteType
Integer32,
rosMgmtOspfRouteLsType
INTEGER,
rosMgmtOspfRouteMetric
Integer32,
rosMgmtOspfRouteNextHop
IpAddress,
rosMgmtOspfRouteAdvRtr
IpAddress,
rosMgmtOspfRouteArea
Integer32
}
rosMgmtOspfRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It has been used to describe the destination address of
an ospf route."
::= { rosMgmtOspfRouteEntry 1 }
rosMgmtOspfRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It has been used to describe the mask of
an ospf route."
::= { rosMgmtOspfRouteEntry 2 }
rosMgmtOspfRouteType OBJECT-TYPE
SYNTAX Integer32 (1..'37'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It indicates the type of an ospf route.
The hige 8 bits represents the ospf route type.
Value 1, represents the route is a ROUTER route,
whith is to a destined router.
Value 2, is for a NETWORK route, most caculated
ospf route is NETWORK route.
Value 3, represents the route is to be DISCARDed resently.
The low 8 bits represents the ospf route path type.
Value 1, represents the route path is a intra area path,
Value 2, represents the route path is a inter area path,
Value 3, represents the route path is a type1 external path,
Value 4, represents the route path is a type2 external path"
::= { rosMgmtOspfRouteEntry 3 }
rosMgmtOspfRouteLsType OBJECT-TYPE
SYNTAX INTEGER {
stub (0),
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5),
multicastLink (6),
nssaExternalLink (7),
areaOpaqueLink (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the LSA type of
a router."
::= { rosMgmtOspfRouteEntry 4 }
rosMgmtOspfRouteMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the metric of
an ospf route. "
::= { rosMgmtOspfRouteEntry 5 }
rosMgmtOspfRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the nexthop address of
an ospf route."
::= { rosMgmtOspfRouteEntry 6 }
rosMgmtOspfRouteAdvRtr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the advertising router of
an ospf route."
::= { rosMgmtOspfRouteEntry 7 }
rosMgmtOspfRouteArea OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the ccmputing area of
an ospf route."
::= { rosMgmtOspfRouteEntry 8 }
-- rosMgmtOspfBdrRouteTable
--
rosMgmtOspfBdrRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfBdrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to storage the imformation of boder router."
::= { rosMgmtOspfObjects 20 }
rosMgmtOspfBdrRouteEntry OBJECT-TYPE
SYNTAX RosMgmtOspfBdrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfBdrRouteTable"
INDEX { rosMgmtOspfProcessId,
rosMgmtOspfBdrRouteRtrType,
rosMgmtOspfBdrRouteArea,
rosMgmtOspfBdrRouteDest,
rosMgmtOspfBdrRouteNextHop }
::= { rosMgmtOspfBdrRouteTable 1 }
RosMgmtOspfBdrRouteEntry ::=
SEQUENCE {
rosMgmtOspfBdrRouteRtrType
Integer32,
rosMgmtOspfBdrRouteArea
IpAddress,
rosMgmtOspfBdrRouteDest
IpAddress,
rosMgmtOspfBdrRouteNextHop
IpAddress,
rosMgmtOspfBdrRouteLsType
INTEGER,
rosMgmtOspfBdrRouteMetric
Integer32
}
rosMgmtOspfBdrRouteRtrType OBJECT-TYPE
SYNTAX Integer32 (1..'77'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It indicates the type of an ospf router.
The hige 8 bits is a bit mask corresponding to
the ospf router type.
Bit 1, if set, indicates that the router is an ABR.
Bit 2, if set, indicates that the router is an ASBR..
Bit 3, if set, indicates that the router has a VLINK in this area.
Bit 4, if set, indicates that the routers always translates Type-7.
Bit 5, if set, indicates that it is a shortcut-ABR specific flag.
The low 8 bits represents the route path type to this router.
Value 1, represents the route path is a intra area path,
Value 2, represents the route path is a inter area path,
Value 3, represents the route path is a type1 external path,
Value 4, represents the route path is a type2 external path"
::= { rosMgmtOspfBdrRouteEntry 1 }
rosMgmtOspfBdrRouteArea OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It has been used to describe the area of
a boder router."
::= { rosMgmtOspfBdrRouteEntry 2 }
rosMgmtOspfBdrRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It has been used to describe the boder router by
it's router id."
::= { rosMgmtOspfBdrRouteEntry 3 }
rosMgmtOspfBdrRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IIt has been used to describe the nexthop router to
reach a boder router."
::= { rosMgmtOspfBdrRouteEntry 4 }
rosMgmtOspfBdrRouteLsType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5),
multicastLink (6),
nssaExternalLink (7),
areaOpaqueLink (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the LSA type of
a boder router."
::= { rosMgmtOspfBdrRouteEntry 5 }
rosMgmtOspfBdrRouteMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It has been used to describe the metric to
a boder router."
::= { rosMgmtOspfBdrRouteEntry 6 }
rosMgmtOspfDistributeListGroup OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 21}
-- rosMgmtOspfDistributeListInTable
--
rosMgmtOspfDistributeListInTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfDistributeListInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to config and check distribute-in policy."
::= { rosMgmtOspfDistributeListGroup 1 }
rosMgmtOspfDistributeListInEntry OBJECT-TYPE
SYNTAX RosMgmtOspfDistributeListInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfDistributeListInTable"
INDEX { rosMgmtOspfProcessId }
::= { rosMgmtOspfDistributeListInTable 1 }
RosMgmtOspfDistributeListInEntry ::=
SEQUENCE {
rosMgmtOspfDistrInIpPrefixListName
OCTET STRING,
rosMgmtOspfDistrInAclNum
Integer32,
rosMgmtOspfDistrInRowStatus
RowStatus
}
rosMgmtOspfDistrInIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filter incoming routing updates,the value of this
object indicates the name of an ip-prefix-list."
::= { rosMgmtOspfDistributeListInEntry 1 }
rosMgmtOspfDistrInAclNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filter incoming routing updates by the IP ACL number of OSPF distribute-in policy,
-1 is a value to inditace no setting of acl."
::= { rosMgmtOspfDistributeListInEntry 2 }
rosMgmtOspfDistrInRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,construction,
and destruction.The value of this object has no effect
on whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfDistributeListInEntry 3 }
-- rosMgmtOspfDistributeListOutTable
--
rosMgmtOspfDistributeListOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfDistributeListOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to config and check distribute-out policy."
::= { rosMgmtOspfDistributeListGroup 2 }
rosMgmtOspfDistributeListOutEntry OBJECT-TYPE
SYNTAX RosMgmtOspfDistributeListOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfDistributeListOutTable"
INDEX { rosMgmtOspfProcessId }
::= { rosMgmtOspfDistributeListOutTable 1 }
RosMgmtOspfDistributeListOutEntry ::=
SEQUENCE {
rosMgmtOspfDistrOutIpPrefixListName
OCTET STRING,
rosMgmtOspfDistrOutAclNum
Integer32,
rosMgmtOspfDistrOutRowStatus
RowStatus
}
rosMgmtOspfDistrOutIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filter outgoing routing updates,the value of this object
indicates the name of an ip-prefix-list."
::= { rosMgmtOspfDistributeListOutEntry 1 }
rosMgmtOspfDistrOutAclNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy,
-1 is a value to inditace no setting of acl."
::= { rosMgmtOspfDistributeListOutEntry 2 }
rosMgmtOspfDistrOutRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,construction,
and destruction. The value of this object has no effect
on whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfDistributeListOutEntry 3 }
-- rosMgmtOspfDistributeListOutProtocolTable
--
rosMgmtOspfDistributeListOutProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfDistributeListOutProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to config and check distribute-out policy based on protocol."
::= { rosMgmtOspfDistributeListGroup 3 }
rosMgmtOspfDistributeListOutProtocolEntry OBJECT-TYPE
SYNTAX RosMgmtOspfDistributeListOutProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the rosMgmtOspfDistributeListOutProtocolTable"
INDEX {
rosMgmtOspfProcessId,
rosMgmtOspfDistrOutProtocol,
rosMgmtOspfDistrOutProcessId
}
::= { rosMgmtOspfDistributeListOutProtocolTable 1 }
RosMgmtOspfDistributeListOutProtocolEntry ::=
SEQUENCE {
rosMgmtOspfDistrOutProtocol
INTEGER,
rosMgmtOspfDistrOutProcessId
ProcessID,
rosMgmtOspfDistrOutProIpPrefixListName
OCTET STRING,
rosMgmtOspfDistrOutProAclNum
Integer32,
rosMgmtOspfDistrOutProRowStatus
RowStatus
}
rosMgmtOspfDistrOutProtocol OBJECT-TYPE
SYNTAX INTEGER { -- RFC1213 route proto define
other(1), -- none of the following
-- non-protocol information,
-- e.g., manually configured
local(2), -- entries
-- set via a network
netmgmt(3), -- management protocol
-- obtained via ICMP,
icmp(4), -- e.g., Redirect
-- the remaining values are
-- all gateway routing
-- protocols
egp(5),
ggp(6),
hello(7),
rip(8),
isis(9),
esis(10),
ciscoIgrp(11),
bbnSpfIgp(12),
ospf(13),
bgp(14)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Redistributed route protocol."
::= { rosMgmtOspfDistributeListOutProtocolEntry 1 }
rosMgmtOspfDistrOutProcessId OBJECT-TYPE
SYNTAX ProcessID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Process id of redistributed route protocol, only support ospf."
::= { rosMgmtOspfDistributeListOutProtocolEntry 2 }
rosMgmtOspfDistrOutProIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filtering outgoing updates based on imported protocol, the value
of this object indicates the name of an ip-prefix-list."
::= { rosMgmtOspfDistributeListOutProtocolEntry 3 }
rosMgmtOspfDistrOutProAclNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filtering outgoing updates based on imported protocol, the value of this object
indicates the IP ACL number, -1 is a value to inditace no setting of acl."
::= { rosMgmtOspfDistributeListOutProtocolEntry 4 }
rosMgmtOspfDistrOutProRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,construction,
and destruction.The value of this object has no effect
on whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfDistributeListOutProtocolEntry 5 }
--rosMgmtOspfDNBitCheckDisableSummaryTable
--
rosMgmtOspfDNBitCheckDisableSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RosMgmtOspfDNBitCheckDisableSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table check or set the operation of ND bit."
::= { rosMgmtOspfObjects 22 }
rosMgmtOspfDNBitCheckDisableSummaryEntry OBJECT-TYPE
SYNTAX RosMgmtOspfDNBitCheckDisableSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define an entry in the RosMgmtOspfDNBitCheckDisableSummaryEntry"
INDEX {
rosMgmtOspfProcessId,
rosMgmtOspfDNBitCheckDisableSummaryRtrId
}
::= { rosMgmtOspfDNBitCheckDisableSummaryTable 1 }
RosMgmtOspfDNBitCheckDisableSummaryEntry ::=
SEQUENCE {
rosMgmtOspfDNBitCheckDisableSummaryRtrId
RouterID,
rosMgmtOspfDNBitCheckDisableSummaryStatus
RowStatus
}
rosMgmtOspfDNBitCheckDisableSummaryRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It indicates the router-id of summary-lsa,which can be operated the DN bit separately.This node can only
be used for check operation"
::= { rosMgmtOspfDNBitCheckDisableSummaryEntry 1 }
rosMgmtOspfDNBitCheckDisableSummaryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { rosMgmtOspfDNBitCheckDisableSummaryEntry 2 }
END