mibs/MIBS/screenos/NETSCREEN-VPN-IKE-MIB

191 lines
5.1 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- This module defines enterprise MIBs for VPN IKE info
--
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.
NETSCREEN-VPN-IKE-MIB DEFINITIONS ::= BEGIN
IMPORTS
netscreenVpn, netscreenVpnMibModule
FROM NETSCREEN-SMI
Integer32, MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
;
netscreenVpnIkeMibModule MODULE-IDENTITY
LAST-UPDATED "200405032022Z" -- May 03, 2004
ORGANIZATION
"Juniper Networks, Inc."
CONTACT-INFO
"Customer Support
1194 North Mathilda Avenue
Sunnyvale, California 94089-1206
USA
Tel: 1-800-638-8296
E-mail: customerservice@juniper.net
HTTP://www.juniper.net"
DESCRIPTION
"This module defines the object that are used to monitor
VPN IKE info"
REVISION "200405030000Z" -- May 03, 2004
DESCRIPTION
"Modified copyright and contact information"
REVISION "200403030000Z" -- March 03, 2004
DESCRIPTION
"Converted to SMIv2 by Longview Software"
REVISION "200311130000Z" -- November 13, 2003
DESCRIPTION
"Correct spelling mistake"
REVISION "200109280000Z" -- September 28, 2001
DESCRIPTION
"No comment"
REVISION "200105140000Z" -- May 14, 2001
DESCRIPTION
"Creation Date"
::= { netscreenVpnMibModule 3 }
NsVpnIkeEntry ::= SEQUENCE
{
nsVpnIkeIndex Integer32,
nsVpnIkeName DisplayString,
nsVpnIkeReplayProc INTEGER,
nsVpnIkeGWTun DisplayString,
nsVpnIkePh2ProOne DisplayString,
nsVpnIkePh2ProTwo DisplayString,
nsVpnIkePh2ProThree DisplayString,
nsVpnIkePh2ProFour DisplayString,
nsVpnIkeMonitorEnable INTEGER,
nsVpnIkeTransMode INTEGER,
nsVpnIkeVsys Integer32
}
nsVpnIke OBJECT IDENTIFIER ::= { netscreenVpn 3 }
nsVpnIkeTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsVpnIkeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPSec supports the automated generation and negotiation of
keys and security associations using the Internet Key
Exchange(IKE) protocol. This table collects the IKE
configuration in NetScreen device."
::= { nsVpnIke 1 }
nsVpnIkeEntry OBJECT-TYPE
SYNTAX NsVpnIkeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the nsVpnIkeTable holds a set of configuration
parameters associated with an IKE."
INDEX
{ nsVpnIkeIndex }
::= { nsVpnIkeTable 1 }
nsVpnIkeIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for ike table. Its value ranges between 0 and
65535 and may not be contiguous."
::= { nsVpnIkeEntry 1 }
nsVpnIkeName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each IKE configuration can have a readable name."
::= { nsVpnIkeEntry 2 }
nsVpnIkeReplayProc OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable Replay Protection"
::= { nsVpnIkeEntry 3 }
nsVpnIkeGWTun OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote Gateway Tunnel Name"
::= { nsVpnIkeEntry 4 }
nsVpnIkePh2ProOne OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Phase 2 Proposal one"
::= { nsVpnIkeEntry 5 }
nsVpnIkePh2ProTwo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Phase 2 Proposal two"
::= { nsVpnIkeEntry 6 }
nsVpnIkePh2ProThree OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Phase 2 Proposal three"
::= { nsVpnIkeEntry 7 }
nsVpnIkePh2ProFour OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Phase 2 Proposal four"
::= { nsVpnIkeEntry 8 }
nsVpnIkeMonitorEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable to monitor VPN tunnel's link status."
::= { nsVpnIkeEntry 9 }
nsVpnIkeTransMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transport Mode Enable (For L2TP-over-IPSec only)"
::= { nsVpnIkeEntry 10 }
nsVpnIkeVsys OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vsys the configuration belongs to."
::= { nsVpnIkeEntry 11 }
END