3287 lines
116 KiB
Plaintext
3287 lines
116 KiB
Plaintext
|
-- *********************************************************************
|
||
|
|
-- **
|
||
|
|
-- ** BATM Advanced Communications.
|
||
|
|
-- **
|
||
|
|
-- *********************************************************************
|
||
|
|
-- ** Filename: PRVT-ISIS-MIB.mib
|
||
|
|
-- ** Project: T-Metro Switches.
|
||
|
|
-- ** Purpose: Private MIB
|
||
|
|
-- *********************************************************************
|
||
|
|
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
|
||
|
|
-- WARNING:
|
||
|
|
--
|
||
|
|
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
|
||
|
|
--
|
||
|
|
-- This file is the property of BATM Advanced Communications and contains
|
||
|
|
-- proprietary and confidential information. This file is made
|
||
|
|
-- available to authorized BATM customers on the express
|
||
|
|
-- condition that neither it, nor any of the information contained
|
||
|
|
-- therein, shall be disclosed to third parties or be used for any
|
||
|
|
-- purpose other than to replace, modify or upgrade firmware and/or
|
||
|
|
-- software components of BATM manufactured equipment within the
|
||
|
|
-- authorized customer's network, and that such transfer be
|
||
|
|
-- completed in accordance with the instructions provided by
|
||
|
|
-- BATM. Any other use is strictly prohibited.
|
||
|
|
--
|
||
|
|
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
|
||
|
|
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
|
||
|
|
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||
|
|
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
|
||
|
|
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
||
|
|
--
|
||
|
|
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
|
||
|
|
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
|
||
|
|
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
|
||
|
|
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
|
||
|
|
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
|
||
|
|
--
|
||
|
|
-- ----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
PRVT-ISIS-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
InterfaceIndex
|
||
|
|
FROM IF-MIB
|
||
|
|
InetAddressPrefixLength
|
||
|
|
FROM INET-ADDRESS-MIB
|
||
|
|
routingProtocols
|
||
|
|
FROM PRVT-SWITCH-MIB
|
||
|
|
Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE, TimeTicks, Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
RowStatus, TEXTUAL-CONVENTION, TruthValue
|
||
|
|
FROM SNMPv2-TC;
|
||
|
|
|
||
|
|
prvtIsisMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201002120000Z"
|
||
|
|
ORGANIZATION
|
||
|
|
"BATM Advanced Communication"
|
||
|
|
CONTACT-INFO
|
||
|
|
"BATM/Telco Systems Support team
|
||
|
|
Email:
|
||
|
|
For North America: techsupport@telco.com
|
||
|
|
For North Europe: support@batm.de, info@batm.de
|
||
|
|
For the rest of the world: techsupport@telco.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"The MIB module for management of the IS-IS protocol."
|
||
|
|
REVISION "201002120000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version."
|
||
|
|
::= { routingProtocols 4 }
|
||
|
|
|
||
|
|
|
||
|
|
PrvtIsisInetAddressType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A value that represents a type of Internet address."
|
||
|
|
SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3),
|
||
|
|
ipv6z(4), dns(5) }
|
||
|
|
|
||
|
|
PrvtIsisInetAddress ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "255a"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An IPv4 IPv6 address depending upon the value of a
|
||
|
|
matching InetAddressType object.
|
||
|
|
An IPv4 address consiats of 4 octets in network-byte order.
|
||
|
|
An IPv6 address consiats of 16 octets in network-byte order"
|
||
|
|
SYNTAX OCTET STRING (SIZE(4 | 16))
|
||
|
|
|
||
|
|
PrvtIsisIPv4Address ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1d.1d.1d.1d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An IPv4 address consisting of 4 octets in network-byte order.
|
||
|
|
A length of zero octets represents no IP address has been
|
||
|
|
assigned."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0 | 4))
|
||
|
|
|
||
|
|
PrvtIsisIPv6Address ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An IPv4 address consisting of 16 octets in network-byte order.
|
||
|
|
A length of zero octets represents no IP address has been
|
||
|
|
assigned."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0 | 16))
|
||
|
|
|
||
|
|
PrvtIsisHostName ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "255t"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A valid host name."
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
|
||
|
|
PrvtIsisAuthUserDataString ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1x:"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Authentication user data."
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
|
||
|
|
PrvtIsisOSINSAddress ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1x:"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"OSI Network Service Address, e.g. NSAP, SNPA, or Network
|
||
|
|
Entity Title"
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..20))
|
||
|
|
|
||
|
|
PrvtIsisSystemID ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1x:"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A ID for an Intermediate System. This should
|
||
|
|
be unique within a network, and is included
|
||
|
|
in all PDUs originated by an Intermediate System.
|
||
|
|
The protocol does not place any meanings upon
|
||
|
|
the bits, other than using ordering to break
|
||
|
|
ties in electing a Designated IS on a LAN."
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
|
||
|
|
PrvtIsisLinkStatePDUID ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1x:"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A Link State PDU Identifier."
|
||
|
|
SYNTAX OCTET STRING (SIZE(8))
|
||
|
|
|
||
|
|
PrvtIsisAdminState ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type used in enabling and disabling a row."
|
||
|
|
SYNTAX INTEGER { on(1), off(2) }
|
||
|
|
|
||
|
|
PrvtIsisLSPBuffSize ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Integer sub range for maximum LSP size."
|
||
|
|
SYNTAX Integer32 (512..16000)
|
||
|
|
|
||
|
|
PrvtIsisLevelState ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"States of the IS-IS protocol."
|
||
|
|
SYNTAX INTEGER { off(1), on(2), waiting(3), overloaded(4) }
|
||
|
|
|
||
|
|
PrvtIsisDefaultMetric ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Integer sub-range for default metric for single hop.
|
||
|
|
ISO 10589 provides for 4 types of metric. Only the
|
||
|
|
'default' metric is used in practice."
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
|
||
|
|
PrvtIsisWideMetric ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Wide Metric for IS Neighbors. ISO 10589 provides a
|
||
|
|
6 bit metric. Traffic Engineering extensions provide
|
||
|
|
24 bit metrics."
|
||
|
|
SYNTAX Unsigned32 (0..16777215)
|
||
|
|
|
||
|
|
PrvtIsisFullMetric ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Full Metric for IP Routes. Traffic Engineering extensions
|
||
|
|
provide 32 bit metrics."
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
|
||
|
|
PrvtIsisMetricType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is this an Internal or External Metric?"
|
||
|
|
SYNTAX INTEGER { internal(1), external(2) }
|
||
|
|
|
||
|
|
PrvtIsisMetricStyle ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Do we use 1195 style Metrics or wide metrics."
|
||
|
|
SYNTAX INTEGER { narrow(1), wide(2), both(3) }
|
||
|
|
|
||
|
|
PrvtIsisISLevel ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies a level."
|
||
|
|
SYNTAX INTEGER { none(0), area(1), domain(2) }
|
||
|
|
|
||
|
|
PrvtIsisCircuitID ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "1x:"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"ID for a circuit."
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
|
||
|
|
PrvtIsisISPriority ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Integer sub-range for IS-IS priority."
|
||
|
|
SYNTAX Integer32 (0..127)
|
||
|
|
|
||
|
|
PrvtIsisUnsigned16TC ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An Unsigned32 further restricted to 16 Bits. Note that
|
||
|
|
the ASN.1 BER encoding may still require 24 Bits for
|
||
|
|
some values."
|
||
|
|
SYNTAX Unsigned32 (0..65535)
|
||
|
|
|
||
|
|
PrvtIsisUnsigned16NoZeroTC ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Same as Unsigned16TC, except that 0 is not permitted."
|
||
|
|
SYNTAX Unsigned32 (1..65535)
|
||
|
|
|
||
|
|
PrvtIsisMaxAgeTC ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"TC for prvtIsisSysMaxAge."
|
||
|
|
SYNTAX Unsigned32 (350..65535)
|
||
|
|
|
||
|
|
PrvtIsisReceiveLSPBufferSizeTC ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"TC for prvtIsisSysReceiveLSPBufferSize"
|
||
|
|
SYNTAX Unsigned32 (1492..16000)
|
||
|
|
|
||
|
|
PrvtIsisUnsigned8TC ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An Unsigned32 further restricted to 8 Bits. Note that
|
||
|
|
the ASN.1 BER encoding may still require 16 Bits for
|
||
|
|
some values."
|
||
|
|
SYNTAX Unsigned32 (0..255)
|
||
|
|
|
||
|
|
PrvtIsisOperStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current operational state of an IS-IS entity."
|
||
|
|
SYNTAX INTEGER { operStatusUp(1), operStatusDown(2),
|
||
|
|
operStatusGoingUp(3), operStatusGoingDown(4),
|
||
|
|
operStatusActFailed(5) }
|
||
|
|
|
||
|
|
PrvtIsisSysRestartType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of restart procedures to follow
|
||
|
|
when IS-IS activates."
|
||
|
|
SYNTAX INTEGER { none(0), start(1), restart(2) }
|
||
|
|
|
||
|
|
prvtIsisMIBObjects OBJECT IDENTIFIER
|
||
|
|
::= { prvtIsisMIB 1 }
|
||
|
|
|
||
|
|
prvtIsisSystem OBJECT IDENTIFIER
|
||
|
|
::= { prvtIsisMIBObjects 1 }
|
||
|
|
|
||
|
|
prvtIsisSysTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisSysEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of instances of the Integrated IS-IS
|
||
|
|
protocol existing on the system."
|
||
|
|
::= { prvtIsisSystem 1 }
|
||
|
|
|
||
|
|
prvtIsisSysEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisSysEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each row defines information specific to a single
|
||
|
|
instance of the IS-IS protocol existing on the system."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.poi cLNSISISBasic-P (1)}"
|
||
|
|
INDEX { prvtIsisSysInstance }
|
||
|
|
::= { prvtIsisSysTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisSysEntry ::= SEQUENCE {
|
||
|
|
prvtIsisSysInstance Integer32,
|
||
|
|
prvtIsisSysExistState RowStatus,
|
||
|
|
prvtIsisSysVersion INTEGER,
|
||
|
|
prvtIsisSysType INTEGER,
|
||
|
|
prvtIsisSysID PrvtIsisSystemID,
|
||
|
|
prvtIsisSysMaxPathSplits Integer32,
|
||
|
|
prvtIsisSysMaxLSPGenInt Integer32,
|
||
|
|
prvtIsisSysPollESHelloRate PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisSysWaitTime PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisSysShutdown TruthValue,
|
||
|
|
prvtIsisSysL2toL1Leaking TruthValue,
|
||
|
|
prvtIsisSysMaxAge PrvtIsisMaxAgeTC,
|
||
|
|
prvtIsisSysReceiveLSPBufferSize PrvtIsisReceiveLSPBufferSizeTC,
|
||
|
|
prvtIsisSysOperStatus PrvtIsisOperStatus,
|
||
|
|
prvtIsisSysAllowAutoI3Config TruthValue,
|
||
|
|
prvtIsisSysCalcMaxDelay Unsigned32,
|
||
|
|
prvtIsisSysCalcThrshUpdStart Unsigned32,
|
||
|
|
prvtIsisSysCalcThrshUpdRestart Unsigned32,
|
||
|
|
prvtIsisSysCalcThrshRestartLimit Unsigned32,
|
||
|
|
prvtIsisSysCalcPauseFreq Unsigned32,
|
||
|
|
prvtIsisSysCheckChecksums Unsigned32,
|
||
|
|
prvtIsisSysZeroAgeLifetime Integer32,
|
||
|
|
prvtIsisSysNumUpdPending Gauge32,
|
||
|
|
prvtIsisSysNumUpdMerged Counter32,
|
||
|
|
prvtIsisSysNumCksumsPending Gauge32,
|
||
|
|
prvtIsisSysTEMetricPcntge Integer32,
|
||
|
|
prvtIsisSysMaxBwidthPcntge Integer32,
|
||
|
|
prvtIsisSysMaxResBwidthPcntge Integer32,
|
||
|
|
prvtIsisSysUnresBwidthPcntge Integer32,
|
||
|
|
prvtIsisSysMaxLSPBwidthPcntge Integer32,
|
||
|
|
prvtIsisSysMinLSPBwidthPcntge Integer32,
|
||
|
|
prvtIsisSysMTUSizePcntge Integer32,
|
||
|
|
prvtIsisSysTERouterID IpAddress,
|
||
|
|
prvtIsisSysIPv6TERouterID PrvtIsisIPv6Address,
|
||
|
|
prvtIsisSysMaxExternalRoutes Unsigned32,
|
||
|
|
prvtIsisSysMaxExternalRoutesAct INTEGER,
|
||
|
|
prvtIsisSysLspFullSuppress INTEGER,
|
||
|
|
prvtIsisSysLspFullSetDBOL TruthValue,
|
||
|
|
prvtIsisSysRestartHelpPeer TruthValue,
|
||
|
|
prvtIsisSysRestartActivationType PrvtIsisSysRestartType,
|
||
|
|
prvtIsisSysRestartAutoResetType PrvtIsisSysRestartType,
|
||
|
|
prvtIsisSysRestartAdjacencyWait Integer32,
|
||
|
|
prvtIsisSysMaxRecoveryTime Integer32,
|
||
|
|
prvtIsisSysClearStats TruthValue,
|
||
|
|
prvtIsisSysSetAttached INTEGER,
|
||
|
|
prvtIsisSysProtSupported BITS,
|
||
|
|
prvtIsisSysRstrctLanAdjsToSubnet TruthValue,
|
||
|
|
prvtIsisSysHostName PrvtIsisHostName,
|
||
|
|
prvtIsisSysCalcSoonAfterCircChng TruthValue,
|
||
|
|
prvtIsisSysSendNotifications BITS,
|
||
|
|
prvtIsisSysLvl1OrigLSPBuffSize PrvtIsisLSPBuffSize,
|
||
|
|
prvtIsisSysLvl1MinLSPGenInt PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisSysLvl1OverloadState PrvtIsisLevelState,
|
||
|
|
prvtIsisSysLvl1SetOverload TruthValue,
|
||
|
|
prvtIsisSysLvl1SetOverloadUntil TimeTicks,
|
||
|
|
prvtIsisSysLvl1MetricStyle PrvtIsisMetricStyle,
|
||
|
|
prvtIsisSysLvl1SPFConsiders PrvtIsisMetricStyle,
|
||
|
|
prvtIsisSysLvl1TEEnabled TruthValue,
|
||
|
|
prvtIsisSysLvl1IPv6TEEnabled TruthValue,
|
||
|
|
prvtIsisSysLvl1RestartT2Duration Integer32,
|
||
|
|
prvtIsisSysLvl1AuthUser PrvtIsisAuthUserDataString,
|
||
|
|
prvtIsisSysLvl2OrigLSPBuffSize PrvtIsisLSPBuffSize,
|
||
|
|
prvtIsisSysLvl2MinLSPGenInt PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisSysLvl2OverloadState PrvtIsisLevelState,
|
||
|
|
prvtIsisSysLvl2SetOverload TruthValue,
|
||
|
|
prvtIsisSysLvl2SetOverloadUntil TimeTicks,
|
||
|
|
prvtIsisSysLvl2MetricStyle PrvtIsisMetricStyle,
|
||
|
|
prvtIsisSysLvl2SPFConsiders PrvtIsisMetricStyle,
|
||
|
|
prvtIsisSysLvl2TEEnabled TruthValue,
|
||
|
|
prvtIsisSysLvl2IPv6TEEnabled TruthValue,
|
||
|
|
prvtIsisSysLvl2RestartT2Duration Integer32,
|
||
|
|
prvtIsisSysLvl2AuthUser PrvtIsisAuthUserDataString
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisSysInstance OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The unique identifier of the Integrated IS-IS
|
||
|
|
instance to which this row corresponds."
|
||
|
|
::= { prvtIsisSysEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisSysExistState OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The existence state (RowStatus) of the IS-IS router.
|
||
|
|
Setting this to state 'destroy' forces the router to
|
||
|
|
forget all the current configuration. Setting the
|
||
|
|
state to 'notInService' stops protocol processing, but
|
||
|
|
retains the configuration."
|
||
|
|
::= { prvtIsisSysEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisSysVersion OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { unknown(0), one(1) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The version number of the IS-IS protocol that
|
||
|
|
is implemented."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi version (1)}"
|
||
|
|
::= { prvtIsisSysEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisSysType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { level1IS(1), level2IS(2), level1L2IS(3) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"At which levels is the Intermediate System
|
||
|
|
running? This object follows the
|
||
|
|
ReplaceOnlyWhileDisabled behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSType (2)}"
|
||
|
|
::= { prvtIsisSysEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisSysID OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisSystemID
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ID for this instance of the Integrated IS-IS
|
||
|
|
protocol. This value is appended to each of the
|
||
|
|
area addresses to form the Network Entity Titles.
|
||
|
|
This value is a 6 byte MAC address.
|
||
|
|
|
||
|
|
This object follows the ReplaceOnlyWhileDisabled
|
||
|
|
behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi systemId (119)}"
|
||
|
|
::= { prvtIsisSysEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxPathSplits OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..32)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum number of paths with equal routing metric value
|
||
|
|
which it is permitted to split between. This object
|
||
|
|
follows the ReplaceOnlyWhileDisabled behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi maximumPathSplits (3)}"
|
||
|
|
::= { prvtIsisSysEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxLSPGenInt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65235)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum interval, in seconds, between generated LSPs
|
||
|
|
by this instance of the protocol. This object follows
|
||
|
|
the ResettingTimer behavior. The value must be
|
||
|
|
greater than any value configured for
|
||
|
|
prvtIsisSysLevelxMinLSPGenInt, and should be at least 300
|
||
|
|
seconds less than prvtIsisSysMaxAge."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi maximumLSPGenerationInterval (6)}"
|
||
|
|
::= { prvtIsisSysEntry 7 }
|
||
|
|
|
||
|
|
prvtIsisSysPollESHelloRate OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value, in seconds, to be used for the suggested ES
|
||
|
|
configuration timer in ISH PDUs when soliciting the ES
|
||
|
|
configuration."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi pollESHelloRate (13)}"
|
||
|
|
::= { prvtIsisSysEntry 8 }
|
||
|
|
|
||
|
|
prvtIsisSysWaitTime OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Number of seconds to delay in state 'waiting' before
|
||
|
|
entering the state 'on'. This object follows the ResettingTimer
|
||
|
|
behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi waitingTime (15)}"
|
||
|
|
::= { prvtIsisSysEntry 9 }
|
||
|
|
|
||
|
|
prvtIsisSysShutdown OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative state of this instance of the
|
||
|
|
Integrated IS-IS protocol. Setting this object to the
|
||
|
|
value 'false' when its current value is 'true' enables operation
|
||
|
|
of this instance of the Integrated IS-IS protocol."
|
||
|
|
::= { prvtIsisSysEntry 10 }
|
||
|
|
|
||
|
|
prvtIsisSysL2toL1Leaking OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If true, allow the router to leak L2 routes into L1."
|
||
|
|
::= { prvtIsisSysEntry 11 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxAge OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisMaxAgeTC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Value to place in RemainingLifeTime field of
|
||
|
|
the LSPs we generate.
|
||
|
|
This should be at least 300 seconds greater than
|
||
|
|
prvtIsisSysMaxLSPGenInt."
|
||
|
|
::= { prvtIsisSysEntry 12 }
|
||
|
|
|
||
|
|
prvtIsisSysReceiveLSPBufferSize OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisReceiveLSPBufferSizeTC
|
||
|
|
UNITS "bytes"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Size of the largest buffer we are designed or
|
||
|
|
configured to store. This should be at least
|
||
|
|
as big as the maximum prvtIsisSysLevelxOrigLSPBuffSize
|
||
|
|
supported by the system.
|
||
|
|
|
||
|
|
If resources allow, we will store and flood LSPs
|
||
|
|
larger than prvtIsisSysReceiveLSPBufferSize, as this
|
||
|
|
can help avoid problems in networks with different
|
||
|
|
values for prvtIsisSysLevelxOrigLSPBuffSize."
|
||
|
|
::= { prvtIsisSysEntry 13 }
|
||
|
|
|
||
|
|
prvtIsisSysOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOperStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current operational status of this instance of the
|
||
|
|
Protocol Manager component of IS-IS.
|
||
|
|
|
||
|
|
Note that IS-IS can only activate if there is at least
|
||
|
|
one active entry in the prvtIsisManAreaAddrTable."
|
||
|
|
::= { prvtIsisSysEntry 14 }
|
||
|
|
|
||
|
|
prvtIsisSysAllowAutoI3Config OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If 'true' then add IP addresses received from the I3 stub
|
||
|
|
to the prvtIsisCircIPAddrTable with admin state 'on'. If
|
||
|
|
'false' then add them with admin state 'off'. This field
|
||
|
|
follows the ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisSysEntry 15 }
|
||
|
|
|
||
|
|
prvtIsisSysCalcMaxDelay OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..120000)
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum delay before the Routing Table is
|
||
|
|
recalculated following a change to the Link State
|
||
|
|
Database. (Recalculation is delayed to reduce the
|
||
|
|
frequency of recalculations of the Routing Table).
|
||
|
|
|
||
|
|
This parameter has units of milliseconds. A value of
|
||
|
|
0 indicates that a routing calculation will
|
||
|
|
immediately follow an update to the database."
|
||
|
|
::= { prvtIsisSysEntry 16 }
|
||
|
|
|
||
|
|
prvtIsisSysCalcThrshUpdStart OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..4294967295)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This parameter can be used to override the routing
|
||
|
|
calculation delay indicated by the prvtIsisSysCalcMaxDelay
|
||
|
|
parameter when the number of updates to the Link State
|
||
|
|
Database reaches a threshold value.
|
||
|
|
|
||
|
|
This parameter specifies the threshold number of updates
|
||
|
|
that can be made to the Link State Database such that any
|
||
|
|
subsequent update to the database causes a full routing
|
||
|
|
calculation to start immediately.
|
||
|
|
|
||
|
|
- 0 indicates that a routing calculation will immediately
|
||
|
|
follow an update to the database.
|
||
|
|
|
||
|
|
- 0xFFFFFFFF indicates that this threshold is infinite, and
|
||
|
|
hence the timing of a routing calculation is determined
|
||
|
|
solely by the configured calculation delay."
|
||
|
|
::= { prvtIsisSysEntry 17 }
|
||
|
|
|
||
|
|
prvtIsisSysCalcThrshUpdRestart OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..4294967295)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This parameter can be used to interrupt a full routing
|
||
|
|
calculation when the number of pending updates to the Link
|
||
|
|
State Database has reached a threshold value.
|
||
|
|
|
||
|
|
This parameter specifies the threshold number of updates
|
||
|
|
that can be made to the Link State Database such that any
|
||
|
|
subsequent update to the database causes the current
|
||
|
|
routing calculation to be interrupted, and a new
|
||
|
|
calculation to start using an up to date Link State
|
||
|
|
Database.
|
||
|
|
|
||
|
|
- 0 indicates that an update to the Link State Database
|
||
|
|
will cause any current routing calculation to be
|
||
|
|
interrupted and a new one to start.
|
||
|
|
|
||
|
|
- 0xFFFFFFFF indicates that this threshold is infinite, and
|
||
|
|
hence no number of pending updates to the database will
|
||
|
|
cause a routing calculation to be interrupted."
|
||
|
|
::= { prvtIsisSysEntry 18 }
|
||
|
|
|
||
|
|
prvtIsisSysCalcThrshRestartLimit OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..4294967295)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This parameter limits the number of consecutive times a
|
||
|
|
routing calculation can be interrupted by new updates.
|
||
|
|
This guarantees that the routing calculation will actually
|
||
|
|
complete.
|
||
|
|
|
||
|
|
- 1 indicates that once a calculation has been interrupted
|
||
|
|
once, it will not be interrupted again.
|
||
|
|
|
||
|
|
- 0xFFFFFFFF indicates that the calculation can always be
|
||
|
|
interrupted."
|
||
|
|
::= { prvtIsisSysEntry 19 }
|
||
|
|
|
||
|
|
prvtIsisSysCalcPauseFreq OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..4294967295)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value determines how regularly a Routing Calculation
|
||
|
|
is paused. It is measured in points. The points scale
|
||
|
|
roughly maps to a time scale, so that the larger this value
|
||
|
|
is, the longer the Routing Calculation runs before pausing.
|
||
|
|
|
||
|
|
- 0 indicates that the routing calculation is paused after
|
||
|
|
every calculation step.
|
||
|
|
|
||
|
|
- 0xFFFFFFFF indicates that the Routing Calculation is
|
||
|
|
never paused."
|
||
|
|
::= { prvtIsisSysEntry 20 }
|
||
|
|
|
||
|
|
prvtIsisSysCheckChecksums OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value determines how often the checksums of LSPs in
|
||
|
|
the Link State Database are checked. If 0, no checksums
|
||
|
|
in the database are checked."
|
||
|
|
::= { prvtIsisSysEntry 21 }
|
||
|
|
|
||
|
|
prvtIsisSysZeroAgeLifetime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the minimum amount of time in seconds for which the
|
||
|
|
header of an expired LSP shall be retained after it has
|
||
|
|
been flooded with zero Remaining Lifetime. All that is
|
||
|
|
required is that the header be retained until the zero
|
||
|
|
Remaining Lifetime LSP has been safely propagated to all
|
||
|
|
the neighbors."
|
||
|
|
::= { prvtIsisSysEntry 22 }
|
||
|
|
|
||
|
|
prvtIsisSysNumUpdPending OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of updates that are pending addition to the Link
|
||
|
|
State Database."
|
||
|
|
::= { prvtIsisSysEntry 23 }
|
||
|
|
|
||
|
|
prvtIsisSysNumUpdMerged OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of updates that have been merged into the Link
|
||
|
|
State Database since the last routing calculation."
|
||
|
|
::= { prvtIsisSysEntry 24 }
|
||
|
|
|
||
|
|
prvtIsisSysNumCksumsPending OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of LSPs in the Link State Database which are now
|
||
|
|
due to have their checksum checked."
|
||
|
|
::= { prvtIsisSysEntry 25 }
|
||
|
|
|
||
|
|
prvtIsisSysTEMetricPcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Traffic Engineering metric is updated in real-time by
|
||
|
|
the I3 Stub. In order to increase performance and reduce
|
||
|
|
network traffic, this parameter determines the minimal
|
||
|
|
percentage change of the TE metric that causes a new LSP
|
||
|
|
to be originated."
|
||
|
|
::= { prvtIsisSysEntry 26 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxBwidthPcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum bandwidth on an interface is updated in
|
||
|
|
real-time by the I3 Stub. In order to increase performance
|
||
|
|
and reduce network traffic, this parameter determines the
|
||
|
|
minimal percentage change of maximum bandwidth that causes
|
||
|
|
a new LSP to be originated."
|
||
|
|
::= { prvtIsisSysEntry 27 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxResBwidthPcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum reservable bandwidth on an interface is updated
|
||
|
|
in real-time by the I3 Stub. In order to increase
|
||
|
|
performance and reduce network traffic, this parameter
|
||
|
|
determines the minimal percentage change of maximum
|
||
|
|
reservable bandwidth that causes a new LSP to be
|
||
|
|
originated."
|
||
|
|
::= { prvtIsisSysEntry 28 }
|
||
|
|
|
||
|
|
prvtIsisSysUnresBwidthPcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The unreserved bandwidth on an interface is updated in
|
||
|
|
real-time by the I3 Stub. In order to increase performance
|
||
|
|
and reduce network traffic, this parameter determines the
|
||
|
|
minimal percentage change of unreserved bandwidth that
|
||
|
|
causes a new LSP to be originated."
|
||
|
|
::= { prvtIsisSysEntry 29 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxLSPBwidthPcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum LSP bandwidth for the various switching
|
||
|
|
descriptors on an interface is updated in real-time by the
|
||
|
|
I3 Stub. In order to increase performance and reduce
|
||
|
|
network traffic, this parameter determines the minimal
|
||
|
|
percentage change of maximum LSP bandwidth that causes a
|
||
|
|
new LSP to be originated."
|
||
|
|
::= { prvtIsisSysEntry 30 }
|
||
|
|
|
||
|
|
prvtIsisSysMinLSPBwidthPcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The minimum LSP bandwidth for the various switching
|
||
|
|
descriptors on an interface is updated in real-time by the
|
||
|
|
I3 Stub. In order to increase performance and reduce
|
||
|
|
network traffic, this parameter determines the minimal
|
||
|
|
percentage change of minmimum LSP bandwidth that causes a
|
||
|
|
new LSP to be originated."
|
||
|
|
::= { prvtIsisSysEntry 31 }
|
||
|
|
|
||
|
|
prvtIsisSysMTUSizePcntge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Maximum Transmission Unit size for the various
|
||
|
|
switching descriptors on an interface is updated in
|
||
|
|
real-time by the I3 Stub. In order to increase performance
|
||
|
|
and reduce network traffic, this parameter determines the
|
||
|
|
minimal percentage change of the Maximum Transmission Unit
|
||
|
|
that causes a new LSP to be originated."
|
||
|
|
::= { prvtIsisSysEntry 32 }
|
||
|
|
|
||
|
|
prvtIsisSysTERouterID OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Local IPv4 TE Router ID. This is a single stable IPv4
|
||
|
|
address that can always be referenced in a path that will
|
||
|
|
be reachable from multiple hops away, regardless of the
|
||
|
|
state of the node's interfaces.
|
||
|
|
|
||
|
|
This field is ignored if prvtIsisSysLevelxTEEnabled is 'false'."
|
||
|
|
::= { prvtIsisSysEntry 33 }
|
||
|
|
|
||
|
|
prvtIsisSysIPv6TERouterID OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisIPv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Local IPv6 TE Router ID. This is a single stable IPv6
|
||
|
|
global address that can always be referenced in a path that
|
||
|
|
will be reachable from multiple hops away, regardless of
|
||
|
|
the state of the node's interfaces.
|
||
|
|
|
||
|
|
This field is ignored if prvtIsisSysLevelxIPv6TEEnabled is
|
||
|
|
'false'."
|
||
|
|
::= { prvtIsisSysEntry 34 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxExternalRoutes OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of static routes and routes
|
||
|
|
redistributed from other protocols that will be accepted.
|
||
|
|
|
||
|
|
The action that will be taken when the maximum is
|
||
|
|
exceeded is controlled by prvtIsisSysMaxExternalRoutesAct.
|
||
|
|
|
||
|
|
0xFFFFFFFF is a special value indicating that the threshold
|
||
|
|
is infinite."
|
||
|
|
::= { prvtIsisSysEntry 35 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxExternalRoutesAct OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { log(1), suppressExternal(2) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The action that will be take whenn the number of
|
||
|
|
external routes exceeds prvtIsisSysMaxExternalRoutes.
|
||
|
|
|
||
|
|
If set to 'log', IS-IS will alert the administrator by
|
||
|
|
logging that the limit has been exceeded.
|
||
|
|
|
||
|
|
If set to 'suppressExternal', IS-IS will remove all
|
||
|
|
external routes from the local LSP (at all active levels)
|
||
|
|
in addition to logging the problem.
|
||
|
|
|
||
|
|
In both cases, the administrator is responsible for
|
||
|
|
correcting the configuration to reduce the number of
|
||
|
|
redistributed external routes.
|
||
|
|
|
||
|
|
In the 'suppressExternal' case, the system
|
||
|
|
is responsible for resynchronizing the set of routes with
|
||
|
|
IS-IS."
|
||
|
|
::= { prvtIsisSysEntry 36 }
|
||
|
|
|
||
|
|
prvtIsisSysLspFullSuppress OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { external(1), none(2) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of routes (if any) that will be removed from the
|
||
|
|
local LSP when the local LSP becomes full at
|
||
|
|
either level.
|
||
|
|
|
||
|
|
When set to 'external', all static routes and routes
|
||
|
|
redistributed from other protocols will be removed from the
|
||
|
|
local LSP (at all active levels) when the local LSP is
|
||
|
|
full.
|
||
|
|
|
||
|
|
If set to 'none', IS-IS will be unable to accept any
|
||
|
|
additional configuration that may increase the size of the
|
||
|
|
local LSP.
|
||
|
|
|
||
|
|
The system administrator should modify the system
|
||
|
|
configuration to reduce the local LSP size - for example,
|
||
|
|
by reducing the number of addresses redistributed from
|
||
|
|
other routing protocols, or by deleting circuit
|
||
|
|
configuration.
|
||
|
|
|
||
|
|
Once this has been done, if prvtIsisSysLspFullSuppress is set
|
||
|
|
to 'external', the system is responsible
|
||
|
|
for resynchronizing the set of routes with ISIS."
|
||
|
|
::= { prvtIsisSysEntry 37 }
|
||
|
|
|
||
|
|
prvtIsisSysLspFullSetDBOL OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If set to 'true', the database overload flag will be set
|
||
|
|
in the local LSP (at all active levels) when the local
|
||
|
|
LSP becomes full (at either level).
|
||
|
|
|
||
|
|
The administrator can clear the database overload flag for
|
||
|
|
a level by setting prvtIsisSysLevelxSetOverload to 'false' for
|
||
|
|
that level."
|
||
|
|
::= { prvtIsisSysEntry 38 }
|
||
|
|
|
||
|
|
prvtIsisSysRestartHelpPeer OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates if the procedures defined in the IS-IS restart
|
||
|
|
RFC (3847) for helping a peer to restart is implemented.
|
||
|
|
|
||
|
|
Note that this object has no effect on the local restart
|
||
|
|
behavior, and so may be set independently of
|
||
|
|
prvtIsisSysRestartActivationType and
|
||
|
|
prvtIsisSysRestartAutoResetType."
|
||
|
|
::= { prvtIsisSysEntry 39 }
|
||
|
|
|
||
|
|
prvtIsisSysRestartActivationType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisSysRestartType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is only used when IS-IS is manually activated
|
||
|
|
or deactivated (in other words, enters or leaves the state
|
||
|
|
with row status 'active' and admin status 'on'), and
|
||
|
|
indicates which restart procedures (if any) are followed.
|
||
|
|
|
||
|
|
During the activation period, IS-IS will use the value
|
||
|
|
that was configured at the start of activation. The value
|
||
|
|
may be changed at any time, but the new value will only
|
||
|
|
take effect the next time that manual activation takes
|
||
|
|
place.
|
||
|
|
|
||
|
|
During deactivation, IS-IS will purge the local LSP from
|
||
|
|
remote nodes if this object is set to 'none' or 'start'.
|
||
|
|
Setting the object to 'restart' before deactivation will
|
||
|
|
prevent the local LSP from being purged.
|
||
|
|
|
||
|
|
A planned restart may be initiated by setting
|
||
|
|
prvtIsisSysShutdown to 'true' and later to 'false'. Graceful
|
||
|
|
restart procedures will only function correctly if the
|
||
|
|
local LSP has not been purged, and so to initiate a planned
|
||
|
|
restart, prvtIsisSysRestartActivationType should be set to
|
||
|
|
'restart' before deactivation."
|
||
|
|
::= { prvtIsisSysEntry 40 }
|
||
|
|
|
||
|
|
prvtIsisSysRestartAutoResetType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisSysRestartType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"There are cases where the IS-IS protocol requires the local
|
||
|
|
node to automatically deactivate and later reactivate.
|
||
|
|
This object indicates which restart procedures (if any) are
|
||
|
|
followed during such an automatic reset.
|
||
|
|
|
||
|
|
During the activation period, IS-IS will use the value
|
||
|
|
that was configured at the start of activation. The value
|
||
|
|
may be changed at any time, but the new value will only
|
||
|
|
take effect the next time that automatic re-activation
|
||
|
|
takes place."
|
||
|
|
::= { prvtIsisSysEntry 41 }
|
||
|
|
|
||
|
|
prvtIsisSysRestartAdjacencyWait OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is only used when IS-IS activates with
|
||
|
|
the activation type (prvtIsisSysRestartActivationType or
|
||
|
|
prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
|
||
|
|
|
||
|
|
It defines how long IS-IS will wait to establish
|
||
|
|
adjacencies before completing the start/restart.
|
||
|
|
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
::= { prvtIsisSysEntry 42 }
|
||
|
|
|
||
|
|
prvtIsisSysMaxRecoveryTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is only used when IS-IS activates with
|
||
|
|
the activation type (prvtIsisSysRestartActivationType or
|
||
|
|
prvtIsisSysRestartAutoResetType) set to 'restart'.
|
||
|
|
|
||
|
|
It defines the maximum time that IS-IS will take before
|
||
|
|
completing restart procedures.
|
||
|
|
|
||
|
|
The value specified puts an upper bound on the duration of
|
||
|
|
the T3 timer described in the IS-IS restart RFC (3847).
|
||
|
|
The actual duration of the timer is the minimum of the value
|
||
|
|
specified and the minimum remaining holding time received
|
||
|
|
on an adjacency.
|
||
|
|
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
::= { prvtIsisSysEntry 43 }
|
||
|
|
|
||
|
|
prvtIsisSysClearStats OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Set to 'true' to clear all system statistics, including the
|
||
|
|
prvtIsisSystemCounter and prvtIsisPacketCounter tables.
|
||
|
|
|
||
|
|
Note that prvtIsisSysStatsLSPCount is not reset by this object.
|
||
|
|
|
||
|
|
Reading the value of this field has no meaning."
|
||
|
|
::= { prvtIsisSysEntry 44 }
|
||
|
|
|
||
|
|
prvtIsisSysSetAttached OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { attachNoOverlapOrRedist(1),
|
||
|
|
attachNoOverlapOnly(2), attachSet(3), attachClear(4) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If IS-IS is operating at both level 1 and level 2, this
|
||
|
|
field indicates how IS-IS should decide whether to set the
|
||
|
|
attached bit in its level 1 LSP.
|
||
|
|
|
||
|
|
- 'attachNoOverlapOrRedist' indicates that the attached bit
|
||
|
|
should be set if either of the following are true.
|
||
|
|
- The IS can reach at least one other area (the IS is
|
||
|
|
adjacent with a L2 router whose area addresses do not
|
||
|
|
overlap with the area addresses we know about at L1).
|
||
|
|
- The IS is redistributing one or more external routes
|
||
|
|
into the AS.
|
||
|
|
|
||
|
|
- 'attachNoOverlapOnly' indicates that the attached bit
|
||
|
|
should be set only if the IS can reach at least one other
|
||
|
|
area.
|
||
|
|
|
||
|
|
- 'attachSet' indicates that the attached bit should always
|
||
|
|
be set.
|
||
|
|
|
||
|
|
- 'attachClear' indicates that the attached bit should
|
||
|
|
never be set."
|
||
|
|
::= { prvtIsisSysEntry 45 }
|
||
|
|
|
||
|
|
prvtIsisSysProtSupported OBJECT-TYPE
|
||
|
|
SYNTAX BITS { reserved(0), ipv4(1), ipv6(2) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute contains the set of protocols supported by
|
||
|
|
this Intermediate System."
|
||
|
|
::= { prvtIsisSysEntry 46 }
|
||
|
|
|
||
|
|
prvtIsisSysRstrctLanAdjsToSubnet OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object only affects IPv4 broadcast circuits. If this
|
||
|
|
is set to 'true', IS-IS will only form adjacencies with
|
||
|
|
intermediate systems that are on the same subnet as the
|
||
|
|
local circuit. This object only has effect when the I3
|
||
|
|
Stub is used to determine subnet addresses and is ignored
|
||
|
|
otherwise."
|
||
|
|
::= { prvtIsisSysEntry 47 }
|
||
|
|
|
||
|
|
prvtIsisSysHostName OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The string that this instance of IS-IS will use as the
|
||
|
|
local hostname.
|
||
|
|
|
||
|
|
This is advertised to other Intermediate Systems in the
|
||
|
|
Dynamic Hostname TLV."
|
||
|
|
::= { prvtIsisSysEntry 48 }
|
||
|
|
|
||
|
|
prvtIsisSysCalcSoonAfterCircChng OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this object to 'true' to minimize the delay before
|
||
|
|
triggering a routing calculation that includes any
|
||
|
|
relevant circuit change. This means a change to the local
|
||
|
|
neighbors (including pseudonodes), or to the reachable
|
||
|
|
addresses received from the I3 stub.
|
||
|
|
|
||
|
|
There are two aspects to minimizing the delay.
|
||
|
|
|
||
|
|
- IS-IS overrides the setting of the
|
||
|
|
prvtIsisSysLevelMinLSPGenInt object when such a change
|
||
|
|
occurs, and usually regenerates the local LSP(s)
|
||
|
|
immediately. The only exception is when IS-IS is
|
||
|
|
performing restart procedures as defined in RFC3847.
|
||
|
|
This RFC specifies when IS-IS can update the local
|
||
|
|
LSP during a restart.
|
||
|
|
|
||
|
|
- IS-IS overrides all of the objects that affect the
|
||
|
|
scheduling of routing calculations, with the exception
|
||
|
|
of the prvtIsisSysCalcThrshRestartLimit object. It ensures
|
||
|
|
that a routing calculation including the updated LSPs
|
||
|
|
takes place as soon as possible. It abandons an
|
||
|
|
existing route calculation if necessary, unless more
|
||
|
|
than prvtIsisSysCalcThrshRestartLimit successive
|
||
|
|
calculations would have been interrupted."
|
||
|
|
::= { prvtIsisSysEntry 49 }
|
||
|
|
|
||
|
|
prvtIsisSysSendNotifications OBJECT-TYPE
|
||
|
|
SYNTAX BITS { circuitIndication(0), databaseOverload(1),
|
||
|
|
manualAreaAddressDrops(2), idLengthMismatch(3),
|
||
|
|
maxAreaAddressMismatch(4), ownLspPurge(5),
|
||
|
|
areaMismatch(6), rejectedAdjacency(7),
|
||
|
|
adjacencyChange(8), lspErrorDetected(9) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This attribute contains the set of notifications generated
|
||
|
|
by this Intermediate System.
|
||
|
|
|
||
|
|
The notifications that may be enabled are the prvtIsisCircIndTable,
|
||
|
|
prvtIsisDatabaseOverload, prvtIsisManualAddressDrops, prvtIsisIDLenMismatch,
|
||
|
|
prvtIsisMaxAreaAddressesMismatch, prvtIsisOwnLSPPurge, prvtIsisAreaMismatch,
|
||
|
|
prvtIsisRejectedAdjacency, prvtIsisAdjacencyChange and
|
||
|
|
prvtIsisLSPErrorDetected notifications."
|
||
|
|
::= { prvtIsisSysEntry 50 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1OrigLSPBuffSize OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLSPBuffSize
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum size of LSPs and SNPs originated by
|
||
|
|
this Intermediate System at level 1.
|
||
|
|
This object follows the ReplaceOnlyWhileDisabled
|
||
|
|
behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi originatingL1LSPBufferSize (9)}"
|
||
|
|
::= { prvtIsisSysEntry 60 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1MinLSPGenInt OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimum interval, in seconds, between successive
|
||
|
|
generation of LSPs with the same LSPID at level 1
|
||
|
|
by this instance of the protocol. This object
|
||
|
|
follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi minimumLSPGenerationInterval (11)}"
|
||
|
|
::= { prvtIsisSysEntry 61 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1OverloadState OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLevelState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Overload state of the database at level 1.
|
||
|
|
The value 'overloaded' indicates a database that is
|
||
|
|
low on an essential resource, such as memory.
|
||
|
|
The administrator may indirectly force the state to
|
||
|
|
'waiting' when the router is initializing by setting
|
||
|
|
the object prvtIsisSysLvl1SetOverload.
|
||
|
|
If the state is waiting or overloaded, we
|
||
|
|
originate LSPs with the Overload bit set."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l1State (17)}"
|
||
|
|
::= { prvtIsisSysEntry 62 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1SetOverload OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Administratively set the overload bit for the level.
|
||
|
|
The overload bit will continue to be set if the
|
||
|
|
implementation runs out of memory, independent of
|
||
|
|
this variable."
|
||
|
|
::= { prvtIsisSysEntry 63 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1SetOverloadUntil OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If set, the overload bit should be set, and cleared
|
||
|
|
after sysUpTime exceeds this value."
|
||
|
|
::= { prvtIsisSysEntry 64 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1MetricStyle OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisMetricStyle
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Which style of Metric do we generate in our LSPs
|
||
|
|
at level 1 ?"
|
||
|
|
::= { prvtIsisSysEntry 65 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1SPFConsiders OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisMetricStyle
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Which style of Metric do we consider in our
|
||
|
|
SPF computation at level 1 ?"
|
||
|
|
::= { prvtIsisSysEntry 66 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1TEEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Do we do Traffic Engineering for IPv4 at level 1 ?
|
||
|
|
|
||
|
|
Currently only Traffic Engineering at L1 is supported.
|
||
|
|
|
||
|
|
If Traffic Engineering is enabled, prvtIsisSysLvl1MetricStyle
|
||
|
|
must be set to 'wide' or 'both', and a value must be
|
||
|
|
configured for prvtIsisSysTERouterID.
|
||
|
|
|
||
|
|
When Traffic Engineering is enabled for IPv4, this IS will
|
||
|
|
advertise the IPv4 TE router ID in the local LSP, and will
|
||
|
|
advertise traffic engineering parameters (where available)
|
||
|
|
for links configured to support IPv4.
|
||
|
|
|
||
|
|
This object is ignored if the 'ipv4' bit is not set in the
|
||
|
|
value of prvtIsisSysProtSupported."
|
||
|
|
::= { prvtIsisSysEntry 67 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1IPv6TEEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Do we do Traffic Engineering for IPv6 at level 1 ?
|
||
|
|
|
||
|
|
Currently only Traffic Engineering at L1 is supported.
|
||
|
|
|
||
|
|
If Traffic Engineering is enabled, a value must be
|
||
|
|
configured for prvtIsisSysIPv6TERouterID.
|
||
|
|
|
||
|
|
When Traffic Engineering is enabled for IPv6, this IS will
|
||
|
|
advertise the IPv6 TE router ID in the local LSP, and will
|
||
|
|
advertise traffic engineering parameters (where available)
|
||
|
|
for links configured to support IPv6.
|
||
|
|
|
||
|
|
This object is ignored if the 'ipv6' bit is not set in the
|
||
|
|
value of prvtIsisSysProtSupported."
|
||
|
|
::= { prvtIsisSysEntry 68 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1RestartT2Duration OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is only used when IS-IS activates with
|
||
|
|
the activation type (prvtIsisSysRestartActivationType or
|
||
|
|
prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
|
||
|
|
|
||
|
|
It defines how long IS-IS will wait to complete database
|
||
|
|
synchronization at level 1 before completing the
|
||
|
|
start/restart.
|
||
|
|
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
::= { prvtIsisSysEntry 69 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl1AuthUser OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisAuthUserDataString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Authentication user data for area/domain level
|
||
|
|
authentication.
|
||
|
|
|
||
|
|
This data is passed opaquely to the authentication
|
||
|
|
interface where it can be used to assist with
|
||
|
|
authentication decisions."
|
||
|
|
::= { prvtIsisSysEntry 70 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2OrigLSPBuffSize OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLSPBuffSize
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum size of LSPs and SNPs originated by
|
||
|
|
this Intermediate System at level 2.
|
||
|
|
This object follows the ReplaceOnlyWhileDisabled
|
||
|
|
behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi originatingL1LSPBufferSize (9)}"
|
||
|
|
::= { prvtIsisSysEntry 80 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2MinLSPGenInt OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimum interval, in seconds, between successive
|
||
|
|
generation of LSPs with the same LSPID at level 2
|
||
|
|
by this instance of the protocol. This object
|
||
|
|
follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi minimumLSPGenerationInterval (11)}"
|
||
|
|
::= { prvtIsisSysEntry 81 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2OverloadState OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLevelState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Overload state of the database at level 2.
|
||
|
|
The value 'overloaded' indicates a database that is
|
||
|
|
low on an essential resource, such as memory.
|
||
|
|
The administrator may indirectly force the state to
|
||
|
|
'waiting' when the router is initializing by setting
|
||
|
|
the object prvtIsisSysLvl2SetOverload.
|
||
|
|
If the state is waiting or overloaded, we
|
||
|
|
originate LSPs with the Overload bit set."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l1State (17)}"
|
||
|
|
::= { prvtIsisSysEntry 82 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2SetOverload OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Administratively set the overload bit for the level.
|
||
|
|
The overload bit will continue to be set if the
|
||
|
|
implementation runs out of memory, independent of
|
||
|
|
this variable."
|
||
|
|
::= { prvtIsisSysEntry 83 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2SetOverloadUntil OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If set, the overload bit should be set, and cleared
|
||
|
|
after sysUpTime exceeds this value."
|
||
|
|
::= { prvtIsisSysEntry 84 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2MetricStyle OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisMetricStyle
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Which style of Metric do we generate in our LSPs
|
||
|
|
at level 2 ?"
|
||
|
|
::= { prvtIsisSysEntry 85 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2SPFConsiders OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisMetricStyle
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Which style of Metric do we consider in our
|
||
|
|
SPF computation at level 2 ?"
|
||
|
|
::= { prvtIsisSysEntry 86 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2TEEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Do we do Traffic Engineering for IPv4 at level 2 ?
|
||
|
|
|
||
|
|
Currently only Traffic Engineering at L1 is supported.
|
||
|
|
|
||
|
|
If Traffic Engineering is enabled, prvtIsisSysLvl2MetricStyle
|
||
|
|
must be set to 'wide' or 'both', and a value must be
|
||
|
|
configured for prvtIsisSysTERouterID.
|
||
|
|
|
||
|
|
When Traffic Engineering is enabled for IPv4, this IS will
|
||
|
|
advertise the IPv4 TE router ID in the local LSP, and will
|
||
|
|
advertise traffic engineering parameters (where available)
|
||
|
|
for links configured to support IPv4.
|
||
|
|
|
||
|
|
This object is ignored if the 'ipv4' bit is not set in the
|
||
|
|
value of prvtIsisSysProtSupported."
|
||
|
|
::= { prvtIsisSysEntry 87 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2IPv6TEEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Do we do Traffic Engineering for IPv6 at level 2 ?
|
||
|
|
|
||
|
|
Currently only Traffic Engineering at L1 is supported.
|
||
|
|
|
||
|
|
If Traffic Engineering is enabled, a value must be
|
||
|
|
configured for prvtIsisSysIPv6TERouterID.
|
||
|
|
|
||
|
|
When Traffic Engineering is enabled for IPv6, this IS will
|
||
|
|
advertise the IPv6 TE router ID in the local LSP, and will
|
||
|
|
advertise traffic engineering parameters (where available)
|
||
|
|
for links configured to support IPv6.
|
||
|
|
|
||
|
|
This object is ignored if the 'ipv6' bit is not set in the
|
||
|
|
value of prvtIsisSysProtSupported."
|
||
|
|
::= { prvtIsisSysEntry 88 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2RestartT2Duration OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is only used when IS-IS activates with
|
||
|
|
the activation type (prvtIsisSysRestartActivationType or
|
||
|
|
prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
|
||
|
|
|
||
|
|
It defines how long IS-IS will wait to complete database
|
||
|
|
synchronization at level 2 before completing the
|
||
|
|
start/restart.
|
||
|
|
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
::= { prvtIsisSysEntry 89 }
|
||
|
|
|
||
|
|
prvtIsisSysLvl2AuthUser OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisAuthUserDataString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Authentication user data for area/domain level
|
||
|
|
authentication.
|
||
|
|
|
||
|
|
This data is passed opaquely to the authentication
|
||
|
|
interface where it can be used to assist with
|
||
|
|
authentication decisions."
|
||
|
|
::= { prvtIsisSysEntry 90 }
|
||
|
|
|
||
|
|
prvtIsisManAreaAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisManAreaAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of manual area addresses configured on this
|
||
|
|
Intermediate System."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi manualAreaAddresses (10)}"
|
||
|
|
::= { prvtIsisSystem 2 }
|
||
|
|
|
||
|
|
prvtIsisManAreaAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisManAreaAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains one area address manually configured
|
||
|
|
on this system"
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisManAreaAddr }
|
||
|
|
::= { prvtIsisManAreaAddrTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisManAreaAddrEntry ::= SEQUENCE {
|
||
|
|
prvtIsisManAreaAddr PrvtIsisOSINSAddress,
|
||
|
|
prvtIsisManAreaAddrExistState RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisManAreaAddr OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOSINSAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A manually configured area address for this system. This
|
||
|
|
object follows the index behavior.
|
||
|
|
The area address must have a non-zero length."
|
||
|
|
::= { prvtIsisManAreaAddrEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisManAreaAddrExistState OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The existence state (RowStatus) of the prvtIsisManAreaAddrEntry"
|
||
|
|
::= { prvtIsisManAreaAddrEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisAreaAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisAreaAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The union of the sets of area addresses reported in all
|
||
|
|
Level 1 LSPs with segment number zero received by this
|
||
|
|
instance of the protocol from Intermediate Systems which
|
||
|
|
are reachable via Level 1 routing."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi areaAddresses (18)}"
|
||
|
|
::= { prvtIsisSystem 3 }
|
||
|
|
|
||
|
|
prvtIsisAreaAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisAreaAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains one area address reported in a
|
||
|
|
Level 1 LSP received by this instance of the IS-IS
|
||
|
|
protocol.
|
||
|
|
|
||
|
|
Received area addresses with a length of zero are
|
||
|
|
ignored."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisAreaAddr }
|
||
|
|
::= { prvtIsisAreaAddrTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisAreaAddrEntry ::= SEQUENCE {
|
||
|
|
prvtIsisAreaAddr PrvtIsisOSINSAddress,
|
||
|
|
prvtIsisAreaAddrInLSP TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisAreaAddr OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOSINSAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An area address reported in a Level 1 LSP received by
|
||
|
|
this instance of the IS-IS protocol.
|
||
|
|
|
||
|
|
Received area addresses with a length of zero are
|
||
|
|
ignored."
|
||
|
|
::= { prvtIsisAreaAddrEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisAreaAddrInLSP OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Following ISO10589 section 7.1.5, we advertise the three
|
||
|
|
numerically lowest level 1 area addresses in the level 2
|
||
|
|
LSP fragment zero.
|
||
|
|
|
||
|
|
If 'true', then this area address is one of the three
|
||
|
|
numerically lowest area addresses, and if this router is
|
||
|
|
active at level 2, it is therefore one of those area
|
||
|
|
addresses advertised in the level 2 LSP fragment 0."
|
||
|
|
::= { prvtIsisAreaAddrEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisSummAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisSummAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of IP summary addresses to use in forming
|
||
|
|
summary TLVs originated by this Intermediate System.
|
||
|
|
|
||
|
|
An administrator may use a summary address to combine
|
||
|
|
and modify IP Reachability announcements. If the
|
||
|
|
Intermediate system can reach any subset of the summary
|
||
|
|
address, the summary address will be announced instead,
|
||
|
|
at the configured metric."
|
||
|
|
::= { prvtIsisSystem 5 }
|
||
|
|
|
||
|
|
prvtIsisSummAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisSummAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains one IP summary address."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisSummAddress }
|
||
|
|
::= { prvtIsisSummAddrTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisSummAddrEntry ::= SEQUENCE {
|
||
|
|
prvtIsisSummAddress OCTET STRING,
|
||
|
|
prvtIsisSummAddrExistState RowStatus,
|
||
|
|
prvtIsisSummAddrMetric PrvtIsisDefaultMetric,
|
||
|
|
prvtIsisSummAddrFullMetric PrvtIsisFullMetric
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisSummAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(5))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address and prefix length value for this summary address."
|
||
|
|
::= { prvtIsisSummAddrEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisSummAddrExistState OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The existence state (RowStatus) of this summary address."
|
||
|
|
::= { prvtIsisSummAddrEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisSummAddrMetric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisDefaultMetric
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The metric value to announce this summary
|
||
|
|
address within LSPs generated by this system."
|
||
|
|
::= { prvtIsisSummAddrEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisSummAddrFullMetric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisFullMetric
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The wide metric value to announce this summary
|
||
|
|
address within LSPs generated by this system."
|
||
|
|
::= { prvtIsisSummAddrEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisRedistributeTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisRedistributeEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The table represents the routing protocols redistributed into
|
||
|
|
the IS-IS routing domain.
|
||
|
|
|
||
|
|
Creation of conceptual row in the table starts the redistribution of the
|
||
|
|
specified protocol, which would lead to the injection of routing information
|
||
|
|
from that protocol into IS-IS.
|
||
|
|
|
||
|
|
Deletion of conceptual row would stop the redistribution of that protocol
|
||
|
|
into the IS-IS."
|
||
|
|
::= { prvtIsisSystem 10 }
|
||
|
|
|
||
|
|
prvtIsisRedistributeEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisRedistributeEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry into the prvtIsisRedistributeTable."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisRedistributeProtocol }
|
||
|
|
::= { prvtIsisRedistributeTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisRedistributeEntry ::= SEQUENCE {
|
||
|
|
prvtIsisRedistributeProtocol INTEGER,
|
||
|
|
prvtIsisRedistributeRowStatus RowStatus,
|
||
|
|
prvtIsisRedistributeLevel INTEGER,
|
||
|
|
prvtIsisRedistributeMetric Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisRedistributeProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { kernel(2), connect(3), static(4), default(17) }
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The specific routes redistributed into IS-IS."
|
||
|
|
::= { prvtIsisRedistributeEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisRedistributeRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the status of the row.
|
||
|
|
|
||
|
|
Setting of this field to active enables the redistribution of the protocol.
|
||
|
|
Setting this field to destroy disables the redistribution of the protocol."
|
||
|
|
::= { prvtIsisRedistributeEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisRedistributeLevel OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { level1(1), level2(2) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IS-IS level at which this row applies to."
|
||
|
|
::= { prvtIsisRedistributeEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisRedistributeMetric OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IS-IS protocol metric to assign to the redistributed route."
|
||
|
|
::= { prvtIsisRedistributeEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisCirc OBJECT IDENTIFIER
|
||
|
|
::= { prvtIsisMIBObjects 3 }
|
||
|
|
|
||
|
|
prvtIsisCircTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisCircEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The table of circuits used by each instance of
|
||
|
|
Integrated IS-IS on this system."
|
||
|
|
::= { prvtIsisCirc 2 }
|
||
|
|
|
||
|
|
prvtIsisCircEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisCircEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An prvtIsisCircEntry exists for each circuit used by
|
||
|
|
Integrated IS-IS on this system."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisCircIfIndex }
|
||
|
|
::= { prvtIsisCircTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisCircEntry ::= SEQUENCE {
|
||
|
|
prvtIsisCircIfIndex InterfaceIndex,
|
||
|
|
prvtIsisCircExistState RowStatus,
|
||
|
|
prvtIsisCircIfSubIndex Integer32,
|
||
|
|
prvtIsisCircShutdown TruthValue,
|
||
|
|
prvtIsisCircType INTEGER,
|
||
|
|
prvtIsisCircExtDomain TruthValue,
|
||
|
|
prvtIsisCircLevel INTEGER,
|
||
|
|
prvtIsisCircPassiveCircuit TruthValue,
|
||
|
|
prvtIsisCircMeshGroupEnabled INTEGER,
|
||
|
|
prvtIsisCircMeshGroup Unsigned32,
|
||
|
|
prvtIsisCircSmallHellos TruthValue,
|
||
|
|
prvtIsisCircLastUpTime TimeTicks,
|
||
|
|
prvtIsisCirc3WayEnabled TruthValue,
|
||
|
|
prvtIsisCircExtendedCircID Unsigned32,
|
||
|
|
prvtIsisCircOperState PrvtIsisOperStatus,
|
||
|
|
prvtIsisCircSdEntityIndex Integer32,
|
||
|
|
prvtIsisCircDlBuffPoolSize Unsigned32,
|
||
|
|
prvtIsisCircSdPDUBuffPoolSize Unsigned32,
|
||
|
|
prvtIsisCircSdIndBuffPoolSize Unsigned32,
|
||
|
|
prvtIsisCircDataLinkBlockSize Unsigned32,
|
||
|
|
prvtIsisCircPhysicalAddress OCTET STRING,
|
||
|
|
prvtIsisCircManualOrAutomatic INTEGER,
|
||
|
|
prvtIsisCircT1TimerRunning TruthValue,
|
||
|
|
prvtIsisCircProtSupported BITS,
|
||
|
|
prvtIsisCircPtToPtOverLAN TruthValue,
|
||
|
|
prvtIsisCircLvl1Metric PrvtIsisDefaultMetric,
|
||
|
|
prvtIsisCircLvl1WideMetric PrvtIsisWideMetric,
|
||
|
|
prvtIsisCircLvl1ISPriority PrvtIsisISPriority,
|
||
|
|
prvtIsisCircLvl1IDOctet Integer32,
|
||
|
|
prvtIsisCircLvl1ID PrvtIsisCircuitID,
|
||
|
|
prvtIsisCircLvl1DesIS PrvtIsisCircuitID,
|
||
|
|
prvtIsisCircLvl1HelloMultiplier Integer32,
|
||
|
|
prvtIsisCircLvl1HelloTimer Integer32,
|
||
|
|
prvtIsisCircLvl1DRHelloTimer Integer32,
|
||
|
|
prvtIsisCircLvl1LSPThrottle PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisCircLvl1MinLSPRetransInt Integer32,
|
||
|
|
prvtIsisCircLvl1CSNPInterval Integer32,
|
||
|
|
prvtIsisCircLvl1PartSNPInterval Integer32,
|
||
|
|
prvtIsisCircLvl1StickyDIS Integer32,
|
||
|
|
prvtIsisCircLvl1AuthUser PrvtIsisAuthUserDataString,
|
||
|
|
prvtIsisCircLvl1IDHostname PrvtIsisHostName,
|
||
|
|
prvtIsisCircLvl1DesISHostname PrvtIsisHostName,
|
||
|
|
prvtIsisCircLvl2Metric PrvtIsisDefaultMetric,
|
||
|
|
prvtIsisCircLvl2WideMetric PrvtIsisWideMetric,
|
||
|
|
prvtIsisCircLvl2ISPriority PrvtIsisISPriority,
|
||
|
|
prvtIsisCircLvl2IDOctet Integer32,
|
||
|
|
prvtIsisCircLvl2ID PrvtIsisCircuitID,
|
||
|
|
prvtIsisCircLvl2DesIS PrvtIsisCircuitID,
|
||
|
|
prvtIsisCircLvl2HelloMultiplier Integer32,
|
||
|
|
prvtIsisCircLvl2HelloTimer Integer32,
|
||
|
|
prvtIsisCircLvl2DRHelloTimer Integer32,
|
||
|
|
prvtIsisCircLvl2LSPThrottle PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisCircLvl2MinLSPRetransInt Integer32,
|
||
|
|
prvtIsisCircLvl2CSNPInterval Integer32,
|
||
|
|
prvtIsisCircLvl2PartSNPInterval Integer32,
|
||
|
|
prvtIsisCircLvl2StickyDIS Integer32,
|
||
|
|
prvtIsisCircLvl2IDHostname PrvtIsisHostName,
|
||
|
|
prvtIsisCircLvl2DesISHostname PrvtIsisHostName
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisCircIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of ifIndex for the interface to which this
|
||
|
|
circuit corresponds. This object cannot be modified
|
||
|
|
after creation.
|
||
|
|
|
||
|
|
This is also used as the 3-way circuit ID on
|
||
|
|
point-to-point circuits."
|
||
|
|
::= { prvtIsisCircEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisCircExistState OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The existence state (RowStatus) of this circuit. Setting the
|
||
|
|
state to 'notInService' halts the generation and processing of
|
||
|
|
IS-IS protocol PDUs on this circuit. Setting the state
|
||
|
|
to destroy will also erase any configuration associated
|
||
|
|
with the circuit.
|
||
|
|
|
||
|
|
Automatic circuits from the I3 stub appear as
|
||
|
|
passive circuits with existence state 'active'. These
|
||
|
|
circuits can be configured via the MIB like manual
|
||
|
|
circuits, except that they will survive a Destroy request,
|
||
|
|
with all fields reset to their automatic values.
|
||
|
|
|
||
|
|
MIB configuration overrides automatic configuration."
|
||
|
|
::= { prvtIsisCircEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisCircIfSubIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A specifier for the part of the interface ifIndex to which
|
||
|
|
this circuit corresponds, such as a DLCI or VPI/VCI.
|
||
|
|
This object cannot be modified after creation.
|
||
|
|
|
||
|
|
This field is currently ignored."
|
||
|
|
::= { prvtIsisCircEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisCircShutdown OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative state of the circuit."
|
||
|
|
::= { prvtIsisCircEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisCircType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { unknown(0), broadcast(1), ptToPt(2),
|
||
|
|
staticIn(3), staticOut(4), dA(5) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of the circuit. This object follows the
|
||
|
|
ReplaceOnlyWhileDisabled behavior. The type specified
|
||
|
|
must be compatible with the type of the interface defined
|
||
|
|
by the value of prvtIsisCircIfIndex.
|
||
|
|
|
||
|
|
Only 'broadcast' and 'ptToPt' circuits are currently
|
||
|
|
supported. An automatic circuit can have type 'unknown'
|
||
|
|
until the correct MIB type is defined."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi type (33)}"
|
||
|
|
::= { prvtIsisCircEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisCircExtDomain OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If true, suppress normal transmission of and
|
||
|
|
interpretation of Intra-domain IS-IS PDUs on this
|
||
|
|
circuit."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi externalDomain (46)}"
|
||
|
|
::= { prvtIsisCircEntry 7 }
|
||
|
|
|
||
|
|
prvtIsisCircLevel OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { level1(1), level2(2), level1L2(3) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates which type of packets will be sent and
|
||
|
|
accepted on this circuit. The values used will be
|
||
|
|
modified by the settings of prvtIsisSysType. This
|
||
|
|
object follows the ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 8 }
|
||
|
|
|
||
|
|
prvtIsisCircPassiveCircuit OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Should we include this interface in LSPs, even if
|
||
|
|
it is not running the IS-IS Protocol?
|
||
|
|
|
||
|
|
Circuits with prvtIsisCircExtDomain 'true'
|
||
|
|
will only be included in LSPs if this field is
|
||
|
|
also 'true', and the circuit is active."
|
||
|
|
::= { prvtIsisCircEntry 9 }
|
||
|
|
|
||
|
|
prvtIsisCircMeshGroupEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { inactive(1), blocked(2), set(3) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is this port a member of a mesh group, or blocked?
|
||
|
|
Circuits in the same mesh group act as a virtual
|
||
|
|
multiaccess network. LSPs seen on one circuit in
|
||
|
|
a mesh group will not be flooded to another circuit
|
||
|
|
in the same mesh group."
|
||
|
|
REFERENCE
|
||
|
|
"{ RFC 2973 }"
|
||
|
|
::= { prvtIsisCircEntry 10 }
|
||
|
|
|
||
|
|
prvtIsisCircMeshGroup OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Circuits in the same mesh group act as a virtual
|
||
|
|
multiaccess network. LSPs seen on one circuit in
|
||
|
|
a mesh group will not be flooded to another circuit
|
||
|
|
in the same mesh group. If prvtIsisCircMeshGroupEnabled
|
||
|
|
is inactive or blocked, this value is ignored."
|
||
|
|
REFERENCE
|
||
|
|
"{ RFC 2973 }"
|
||
|
|
::= { prvtIsisCircEntry 11 }
|
||
|
|
|
||
|
|
prvtIsisCircSmallHellos OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Can we send unpadded hellos on LAN circuits? False
|
||
|
|
means LAN Hellos must be padded.
|
||
|
|
|
||
|
|
Currently only unpadded hellos are supported."
|
||
|
|
::= { prvtIsisCircEntry 12 }
|
||
|
|
|
||
|
|
prvtIsisCircLastUpTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If the circuit is enabled, the value of sysUpTime
|
||
|
|
when prvtIsisCircShutdown most recently entered
|
||
|
|
the state on. If the circuit is not on,
|
||
|
|
the value of sysUpTime when the circuit last
|
||
|
|
entered state on, 0 if the circuit has never
|
||
|
|
been on."
|
||
|
|
::= { prvtIsisCircEntry 13 }
|
||
|
|
|
||
|
|
prvtIsisCirc3WayEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is this circuit enabled to run 3Way handshake?
|
||
|
|
|
||
|
|
Currently the 3-way handshake on point to
|
||
|
|
point circuits is always run."
|
||
|
|
::= { prvtIsisCircEntry 14 }
|
||
|
|
|
||
|
|
prvtIsisCircExtendedCircID OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value to be used as the extended circuit ID in
|
||
|
|
3Way handshake. This value is only used if
|
||
|
|
prvtIsisCirc3WayEnabled is true, and must be unique across
|
||
|
|
all circuits on this IS.
|
||
|
|
|
||
|
|
Currently the value for prvtIsisCircIfIndex is used as the extended
|
||
|
|
circuit ID."
|
||
|
|
::= { prvtIsisCircEntry 15 }
|
||
|
|
|
||
|
|
prvtIsisCircOperState OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOperStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The operational state of this circuit."
|
||
|
|
::= { prvtIsisCircEntry 16 }
|
||
|
|
|
||
|
|
prvtIsisCircSdEntityIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies the SDC entity which will handle this circuit.
|
||
|
|
This object must be specified before the circuit can run the
|
||
|
|
IS-IS protocol. It cannot be changed after it has been
|
||
|
|
specified."
|
||
|
|
::= { prvtIsisCircEntry 17 }
|
||
|
|
|
||
|
|
prvtIsisCircDlBuffPoolSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Capacity of the buffer pool used by the DL stub to send
|
||
|
|
data signals to the SDC. This object follows the
|
||
|
|
ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 18 }
|
||
|
|
|
||
|
|
prvtIsisCircSdPDUBuffPoolSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Capacity of the buffer pool into which SDC transfers data
|
||
|
|
signals from the DL Stub. This object follows the
|
||
|
|
ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 19 }
|
||
|
|
|
||
|
|
prvtIsisCircSdIndBuffPoolSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Capacity of the buffer pool used by SDC to send
|
||
|
|
indications to PM. This object follows the
|
||
|
|
ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 20 }
|
||
|
|
|
||
|
|
prvtIsisCircDataLinkBlockSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum size of PDU that can be sent or received over this
|
||
|
|
circuit (MTU). This object follows the
|
||
|
|
ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 21 }
|
||
|
|
|
||
|
|
prvtIsisCircPhysicalAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of the network interface (for example
|
||
|
|
a MAC address on an Ethernet card). This value is only
|
||
|
|
relevant to a broadcast circuit and is ignored on a
|
||
|
|
point-to-point circuit. It needs to be specified in the
|
||
|
|
MIB if the information is not obtained from the I3 stub.
|
||
|
|
|
||
|
|
This object follows the ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 22 }
|
||
|
|
|
||
|
|
prvtIsisCircManualOrAutomatic OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { manual(1), automatic(2), both(3) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Has this circuit been configured by MIB (manual), I3
|
||
|
|
information (automatic) or both? MIB configuration
|
||
|
|
overrides I3 configuration.
|
||
|
|
|
||
|
|
Automatic circuits cannot be destroyed. Destroying a
|
||
|
|
manual circuit removes all configuration for that circuit.
|
||
|
|
Destroying a circuit in state 'both'
|
||
|
|
destroys any MIB configuration and returns the circuit to
|
||
|
|
automatic state."
|
||
|
|
::= { prvtIsisCircEntry 23 }
|
||
|
|
|
||
|
|
prvtIsisCircT1TimerRunning OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is the T1 timer running on this circuit?
|
||
|
|
|
||
|
|
This object is only valid on a circuit that is currently
|
||
|
|
running the IS-IS protocol (prvtIsisCircExtDomain is 'false'
|
||
|
|
and prvtIsisCircOperState is 'operStatusUp').
|
||
|
|
|
||
|
|
When set to 'true', this indicates that the local node is
|
||
|
|
running starting or restarting node procedures."
|
||
|
|
::= { prvtIsisCircEntry 24 }
|
||
|
|
|
||
|
|
prvtIsisCircProtSupported OBJECT-TYPE
|
||
|
|
SYNTAX BITS { reserved(0), ipv4(1), ipv6(2) }
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Which protocols are supported on this circuit?
|
||
|
|
|
||
|
|
Note that the configured value is used in conjunction with
|
||
|
|
the value of prvtIsisSysProtSupported. In particular:
|
||
|
|
|
||
|
|
- IPv4 is supported on the circuit if both
|
||
|
|
prvtIsisSysProtSupported and this object have the 'ipv4' bit
|
||
|
|
set.
|
||
|
|
|
||
|
|
- IPv6 is supported on the circuit if both
|
||
|
|
prvtIsisSysProtSupported and this object have the 'ipv6' bit
|
||
|
|
set."
|
||
|
|
::= { prvtIsisCircEntry 25 }
|
||
|
|
|
||
|
|
prvtIsisCircPtToPtOverLAN OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Allows a broadcast circuit to be configured to operate
|
||
|
|
point-to-point over LAN procedures.
|
||
|
|
|
||
|
|
This is used in conjunction with the prvtIsisCircType object
|
||
|
|
as follows.
|
||
|
|
|
||
|
|
- If prvtIsisCircType = 'ptToPt', the circuit is a standard
|
||
|
|
point-point circuit, and prvtIsisCircPtToPtOverLAN is
|
||
|
|
ignored.
|
||
|
|
|
||
|
|
- If prvtIsisCircType = 'broadcast' and prvtIsisCircPtToPtOverLAN
|
||
|
|
is 'false', the circuit is used as a normal LAN.
|
||
|
|
|
||
|
|
- If prvtIsisCircType = 'broadcast' and prvtIsisCircPtToPtOverLAN
|
||
|
|
is 'true', point-point over LAN procedures are
|
||
|
|
followed.
|
||
|
|
|
||
|
|
Point-to-point over LAN procedures should only be
|
||
|
|
configured when there are just two Intermediate Systems
|
||
|
|
operating on the LAN.
|
||
|
|
|
||
|
|
This object follows the ReplaceOnlyWhileDisabled behavior."
|
||
|
|
::= { prvtIsisCircEntry 26 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1Metric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisDefaultMetric
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The metric value of this circuit for level 1."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l1DefaultMetric (35)}"
|
||
|
|
::= { prvtIsisCircEntry 30 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1WideMetric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisWideMetric
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The wide metric value of this circuit for level 1."
|
||
|
|
::= { prvtIsisCircEntry 31 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1ISPriority OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISPriority
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The priority for becoming the LAN-Designated
|
||
|
|
Intermediate System at level 1."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l2IntermediateSystemPriority (73)}"
|
||
|
|
::= { prvtIsisCircEntry 32 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1IDOctet OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A one byte identifier for the circuit selected by the
|
||
|
|
Intermediate System.
|
||
|
|
|
||
|
|
On point-to-point circuits, the value is used as the Local
|
||
|
|
Circuit ID in point-to-point IIH PDUs transmitted on this
|
||
|
|
circuit. In this case, values of prvtIsisCircLvl1IDOctet do
|
||
|
|
not need to be unique.
|
||
|
|
|
||
|
|
For broadcast circuits, the value is used to generate the
|
||
|
|
LAN ID that will be used if this Intermediate System is
|
||
|
|
elected as the Designated IS on this circuit. The value
|
||
|
|
is required to differ on LANs where the Intermediate System
|
||
|
|
is the Designated Intermediate System."
|
||
|
|
::= { prvtIsisCircEntry 33 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1ID OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisCircuitID
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"On a point to point circuit with a fully initialized
|
||
|
|
adjacency to a peer IS, the value of this object is
|
||
|
|
the circuit ID negotiated during adjacency initialization.
|
||
|
|
On a point to point circuit without such an adjacency,
|
||
|
|
the value is the concatenation of the local system ID
|
||
|
|
and the one byte prvtIsisCircLvl1IDOctet for this circuit
|
||
|
|
i.e. the value that would be proposed for the circuit ID.
|
||
|
|
|
||
|
|
On other circuit types, the value returned is the zero
|
||
|
|
length OCTET STRING."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi ptPtCircuitID (51)}"
|
||
|
|
::= { prvtIsisCircEntry 34 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1DesIS OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisCircuitID
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ID of the LAN-Designated Intermediate System
|
||
|
|
on this circuit at level 1. If, for any reason,
|
||
|
|
this system is not partaking in the relevant
|
||
|
|
Designated Intermediate System election process,
|
||
|
|
then the value returned is the zero length OCTET STRING."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
|
||
|
|
::= { prvtIsisCircEntry 35 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1HelloMultiplier OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..100)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value is multiplied by the corresponding HelloTimer
|
||
|
|
and the result in seconds (rounded up) is used as the
|
||
|
|
holding time in transmitted hellos, to be used by
|
||
|
|
receivers of hello packets from this IS."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSISHelloTimer (45)}"
|
||
|
|
::= { prvtIsisCircEntry 36 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1HelloTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..600000)
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum period, in milliseconds, between IIH PDUs
|
||
|
|
on multiaccess networks at level 1 for LANs.
|
||
|
|
The value at L1 is used as the period between
|
||
|
|
Hellos on L1L2 point to point circuits. Setting
|
||
|
|
this value at level 2 on an L1L2 point to point
|
||
|
|
circuit will result in an error of InconsistentValue.
|
||
|
|
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSISHelloTimer (45)}"
|
||
|
|
::= { prvtIsisCircEntry 37 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1DRHelloTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..120000)
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period, in milliseconds, between Hello PDUs on
|
||
|
|
multiaccess networks when this IS is the Designated
|
||
|
|
Intermediate System. This object follows the
|
||
|
|
ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSISHelloTimer (45)}"
|
||
|
|
::= { prvtIsisCircEntry 38 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1LSPThrottle OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimal interval of time, in milliseconds, between
|
||
|
|
transmissions of LSPs on an interface at level 1."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
|
||
|
|
::= { prvtIsisCircEntry 39 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1MinLSPRetransInt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..300)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimum interval, in seconds, between re-transmission of
|
||
|
|
an LSP at level 1. This object follows the
|
||
|
|
ResettingTimer behavior.
|
||
|
|
|
||
|
|
Note that prvtIsisCircLvl1LSPThrottle controls
|
||
|
|
how fast we send back to back LSPs. This variable
|
||
|
|
controls how fast we re-send the same LSP."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi minimumLSPTransmissionInterval (5)}"
|
||
|
|
::= { prvtIsisCircEntry 40 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1CSNPInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..600)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interval of time, in seconds, between periodic
|
||
|
|
transmission of a complete set of CSNPs on
|
||
|
|
multiaccess networks if this router is the
|
||
|
|
designated router at level 1.
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi completeSNPInterval (8)}"
|
||
|
|
::= { prvtIsisCircEntry 41 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1PartSNPInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..120)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimum interval in seconds between sending Partial
|
||
|
|
Sequence Number PDUs at level 1. This object
|
||
|
|
follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi partialSNPInterval (14)}"
|
||
|
|
::= { prvtIsisCircEntry 42 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1StickyDIS OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..127)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Boost to add to the priority of this router (up to the maximum
|
||
|
|
permitted value) when it becomes DIS at level 1 to make it
|
||
|
|
more likely to remain DIS."
|
||
|
|
::= { prvtIsisCircEntry 43 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1AuthUser OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisAuthUserDataString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Authentication user data for level 1's authentication.
|
||
|
|
This data is passed opaquely to the authentication
|
||
|
|
interface where it can be used to assist with
|
||
|
|
authentication decisions."
|
||
|
|
::= { prvtIsisCircEntry 44 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1IDHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisCircLvl1ID object.
|
||
|
|
|
||
|
|
This is the null string if the prvtIsisCircLvl1ID object
|
||
|
|
is null, or if no hostname is known."
|
||
|
|
::= { prvtIsisCircEntry 45 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl1DesISHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisCircLvl1DesIS object.
|
||
|
|
|
||
|
|
This is the null string if the prvtIsisCircLvl1DesIS object
|
||
|
|
is null, or if no hostname is known."
|
||
|
|
::= { prvtIsisCircEntry 46 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2Metric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisDefaultMetric
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The metric value of this circuit for level 2."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l1DefaultMetric (35)}"
|
||
|
|
::= { prvtIsisCircEntry 50 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2WideMetric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisWideMetric
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The wide metric value of this circuit for level 2."
|
||
|
|
::= { prvtIsisCircEntry 51 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2ISPriority OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISPriority
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The priority for becoming the LAN-Designated
|
||
|
|
Intermediate System at level 2."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l2IntermediateSystemPriority (73)}"
|
||
|
|
::= { prvtIsisCircEntry 52 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2IDOctet OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A one byte identifier for the circuit selected by the
|
||
|
|
Intermediate System.
|
||
|
|
|
||
|
|
On point-to-point circuits, the value is used as the Local
|
||
|
|
Circuit ID in point-to-point IIH PDUs transmitted on this
|
||
|
|
circuit. In this case, values of prvtIsisCircLvl2IDOctet do
|
||
|
|
not need to be unique.
|
||
|
|
|
||
|
|
For broadcast circuits, the value is used to generate the
|
||
|
|
LAN ID that will be used if this Intermediate System is
|
||
|
|
elected as the Designated IS on this circuit. The value
|
||
|
|
is required to differ on LANs where the Intermediate System
|
||
|
|
is the Designated Intermediate System."
|
||
|
|
::= { prvtIsisCircEntry 53 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2ID OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisCircuitID
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"On a point to point circuit with a fully initialized
|
||
|
|
adjacency to a peer IS, the value of this object is
|
||
|
|
the circuit ID negotiated during adjacency initialization.
|
||
|
|
On a point to point circuit without such an adjacency,
|
||
|
|
the value is the concatenation of the local system ID
|
||
|
|
and the one byte prvtIsisCircLvl2IDOctet for this circuit
|
||
|
|
i.e. the value that would be proposed for the circuit ID.
|
||
|
|
|
||
|
|
On other circuit types, the value returned is the zero
|
||
|
|
length OCTET STRING."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi ptPtCircuitID (51)}"
|
||
|
|
::= { prvtIsisCircEntry 54 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2DesIS OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisCircuitID
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ID of the LAN-Designated Intermediate System
|
||
|
|
on this circuit at level 2. If, for any reason,
|
||
|
|
this system is not partaking in the relevant
|
||
|
|
Designated Intermediate System election process,
|
||
|
|
then the value returned is the zero length OCTET STRING."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
|
||
|
|
::= { prvtIsisCircEntry 55 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2HelloMultiplier OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..100)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This value is multiplied by the corresponding HelloTimer
|
||
|
|
and the result in seconds (rounded up) is used as the
|
||
|
|
holding time in transmitted hellos, to be used by
|
||
|
|
receivers of hello packets from this IS."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSISHelloTimer (45)}"
|
||
|
|
::= { prvtIsisCircEntry 56 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2HelloTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..600000)
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum period, in milliseconds, between IIH PDUs
|
||
|
|
on multiaccess networks at level 2 for LANs.
|
||
|
|
The value at L1 is used as the period between
|
||
|
|
Hellos on L1L2 point to point circuits. Setting
|
||
|
|
this value at level 2 on an L1L2 point to point
|
||
|
|
circuit will result in an error of InconsistentValue.
|
||
|
|
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSISHelloTimer (45)}"
|
||
|
|
::= { prvtIsisCircEntry 57 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2DRHelloTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..120000)
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Period, in milliseconds, between Hello PDUs on
|
||
|
|
multiaccess networks when this IS is the Designated
|
||
|
|
Intermediate System. This object follows the
|
||
|
|
ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi iSISHelloTimer (45)}"
|
||
|
|
::= { prvtIsisCircEntry 58 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2LSPThrottle OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "milliseconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimal interval of time, in milliseconds, between
|
||
|
|
transmissions of LSPs on an interface at level 2."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
|
||
|
|
::= { prvtIsisCircEntry 59 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2MinLSPRetransInt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..300)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimum interval, in seconds, between re-transmission of
|
||
|
|
an LSP at level 2. This object follows the
|
||
|
|
ResettingTimer behavior.
|
||
|
|
|
||
|
|
Note that prvtIsisCircLvl2LSPThrottle controls
|
||
|
|
how fast we send back to back LSPs. This variable
|
||
|
|
controls how fast we re-send the same LSP."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi minimumLSPTransmissionInterval (5)}"
|
||
|
|
::= { prvtIsisCircEntry 60 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2CSNPInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..600)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Interval of time, in seconds, between periodic
|
||
|
|
transmission of a complete set of CSNPs on
|
||
|
|
multiaccess networks if this router is the
|
||
|
|
designated router at level 2.
|
||
|
|
This object follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi completeSNPInterval (8)}"
|
||
|
|
::= { prvtIsisCircEntry 61 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2PartSNPInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..120)
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minimum interval in seconds between sending Partial
|
||
|
|
Sequence Number PDUs at level 2. This object
|
||
|
|
follows the ResettingTimer behavior."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi partialSNPInterval (14)}"
|
||
|
|
::= { prvtIsisCircEntry 62 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2StickyDIS OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..127)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Boost to add to the priority of this router (up to the maximum
|
||
|
|
permitted value) when it becomes DIS at level 2 to make it
|
||
|
|
more likely to remain DIS."
|
||
|
|
::= { prvtIsisCircEntry 63 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2IDHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisCircLvl2ID object.
|
||
|
|
|
||
|
|
This is the null string if the prvtIsisCircLvl2ID object
|
||
|
|
is null, or if no hostname is known."
|
||
|
|
::= { prvtIsisCircEntry 65 }
|
||
|
|
|
||
|
|
prvtIsisCircLvl2DesISHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisCircLvl2DesIS object.
|
||
|
|
|
||
|
|
This is the null string if the prvtIsisCircLvl2DesIS object
|
||
|
|
is null, or if no hostname is known."
|
||
|
|
::= { prvtIsisCircEntry 66 }
|
||
|
|
|
||
|
|
prvtIsisISAdj OBJECT IDENTIFIER
|
||
|
|
::= { prvtIsisMIBObjects 6 }
|
||
|
|
|
||
|
|
prvtIsisISAdjTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisISAdjEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The table of adjacencies to Intermediate Systems."
|
||
|
|
::= { prvtIsisISAdj 1 }
|
||
|
|
|
||
|
|
prvtIsisISAdjEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISAdjEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry corresponds to one adjacency to an
|
||
|
|
Intermediate System on this system."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisCircIfIndex,
|
||
|
|
prvtIsisISAdjIndex }
|
||
|
|
::= { prvtIsisISAdjTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisISAdjEntry ::= SEQUENCE {
|
||
|
|
prvtIsisISAdjIndex Integer32,
|
||
|
|
prvtIsisISAdjState INTEGER,
|
||
|
|
prvtIsisISAdj3WayState INTEGER,
|
||
|
|
prvtIsisISAdjNeighSNPAAddress PrvtIsisOSINSAddress,
|
||
|
|
prvtIsisISAdjNeighSysType INTEGER,
|
||
|
|
prvtIsisISAdjNeighSysID PrvtIsisSystemID,
|
||
|
|
prvtIsisISAdjNbrExtendedCircID Unsigned32,
|
||
|
|
prvtIsisISAdjUsage INTEGER,
|
||
|
|
prvtIsisISAdjHoldTimer PrvtIsisUnsigned16NoZeroTC,
|
||
|
|
prvtIsisISAdjNeighPriority PrvtIsisISPriority,
|
||
|
|
prvtIsisISAdjLastUpTime TimeTicks,
|
||
|
|
prvtIsisISAdjRestartCapable TruthValue,
|
||
|
|
prvtIsisISAdjPeerRestartState INTEGER,
|
||
|
|
prvtIsisISAdjSuppressed TruthValue,
|
||
|
|
prvtIsisISAdjNeighLanID OCTET STRING,
|
||
|
|
prvtIsisISAdjNeighHostname PrvtIsisHostName,
|
||
|
|
prvtIsisISAdjNeighLanIDHostname PrvtIsisHostName
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisISAdjIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2000000000)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value identifying the IS adjacency from all
|
||
|
|
other such adjacencies on this circuit. This value is
|
||
|
|
automatically assigned by the system when the adjacency
|
||
|
|
is created."
|
||
|
|
::= { prvtIsisISAdjEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisISAdjState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { down(1), initializing(2), up(3), failed(4) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of the adjacency."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi adjacencyState (78)}"
|
||
|
|
::= { prvtIsisISAdjEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisISAdj3WayState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { up(0), initializing(1), down(2), failed(3) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The 3Way state of the adjacency. These are picked
|
||
|
|
to match the historical on-the-wire representation
|
||
|
|
of the 3Way state, and are not intended to match
|
||
|
|
prvtIsisISAdjState."
|
||
|
|
REFERENCE
|
||
|
|
"{ RFC 3373 }"
|
||
|
|
::= { prvtIsisISAdjEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighSNPAAddress OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOSINSAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SNPA address of the neighboring system."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi neighbourSNPAAddress (79)}"
|
||
|
|
::= { prvtIsisISAdjEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighSysType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { l1IntermediateSystem(1),
|
||
|
|
l2IntermediateSystem(2), l1L2IntermediateSystem(3),
|
||
|
|
unknown(4) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of the neighboring system."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi neighbourSystemType (80)}"
|
||
|
|
::= { prvtIsisISAdjEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighSysID OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisSystemID
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The system ID of the neighboring Intermediate
|
||
|
|
System."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi neighbourSystemIds (83)}"
|
||
|
|
::= { prvtIsisISAdjEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNbrExtendedCircID OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The 4-byte Extended Circuit ID learned from the
|
||
|
|
Neighbor during 3-way handshake, or 0."
|
||
|
|
::= { prvtIsisISAdjEntry 7 }
|
||
|
|
|
||
|
|
prvtIsisISAdjUsage OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { level1(1), level2(2), level1and2(3) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"How is the adjacency used? On a point-to-point link,
|
||
|
|
this might be level1and2, but on a LAN, the usage will
|
||
|
|
be level1 on the adjacency between peers at L1,
|
||
|
|
and level2 for the adjacency between peers at L2."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi adjacencyUsage (82)}"
|
||
|
|
::= { prvtIsisISAdjEntry 8 }
|
||
|
|
|
||
|
|
prvtIsisISAdjHoldTimer OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16NoZeroTC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The holding time in seconds for this adjacency.
|
||
|
|
This value is based on received IIH PDUs and
|
||
|
|
the elapsed time since receipt."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi holdingTimer (85)}"
|
||
|
|
::= { prvtIsisISAdjEntry 9 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighPriority OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISPriority
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Priority of the neighboring Intermediate System for
|
||
|
|
becoming the Designated Intermediate System."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi lANPriority (86)}"
|
||
|
|
::= { prvtIsisISAdjEntry 10 }
|
||
|
|
|
||
|
|
prvtIsisISAdjLastUpTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If the prvtIsisISAdjState is in state 'up', the value
|
||
|
|
of sysUpTime when the adjacency most recently
|
||
|
|
entered the state 'up', or 0 if it has never
|
||
|
|
been in state 'up'."
|
||
|
|
::= { prvtIsisISAdjEntry 11 }
|
||
|
|
|
||
|
|
prvtIsisISAdjRestartCapable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Does the neighbor support restart signalling?
|
||
|
|
|
||
|
|
This object is set to 'true' if the peer includes the
|
||
|
|
restart TLV in IIH PDUs."
|
||
|
|
::= { prvtIsisISAdjEntry 12 }
|
||
|
|
|
||
|
|
prvtIsisISAdjPeerRestartState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { notRestarting(1), restartingNoHelp(2),
|
||
|
|
helpingRestart(3) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is the peer currently restarting?
|
||
|
|
|
||
|
|
Set to 'notRestarting' if the neighbor is not restarting
|
||
|
|
(is not including a restart TLV in the IIH, or is not setting the
|
||
|
|
RR bit).
|
||
|
|
|
||
|
|
Set to 'restartingNoHelp' if the neighbor is restarting
|
||
|
|
(is including a restart TLV with the RR bit in IIH PDUs), but
|
||
|
|
the local node is not helping the restart.
|
||
|
|
|
||
|
|
Set to 'helpingRestart' if the neighbor is restarting and the
|
||
|
|
local node is helping the restart."
|
||
|
|
::= { prvtIsisISAdjEntry 13 }
|
||
|
|
|
||
|
|
prvtIsisISAdjSuppressed OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Has the peer requested that the adjacency be suppressed?
|
||
|
|
If set to 'true', the adjacency will not be added to the
|
||
|
|
local LSP.
|
||
|
|
|
||
|
|
This object is set to 'true' if the peer sets the SA bit in
|
||
|
|
the restart TLV in IIH PDUs."
|
||
|
|
::= { prvtIsisISAdjEntry 14 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighLanID OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"On a broadcast circuit, the LAN ID reported by the
|
||
|
|
neighbor for the Designated Intermediate System on this
|
||
|
|
circuit at this level. For a non-broadcast circuit, or if,
|
||
|
|
for any reason, the neighbor is not partaking in the
|
||
|
|
relevant Designated Intermediate System election process,
|
||
|
|
then the value returned is the zero length OCTET STRING."
|
||
|
|
::= { prvtIsisISAdjEntry 15 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to prvtIsisISAdjNeighSysID.
|
||
|
|
This is the null string if prvtIsisSdEntMapHostnames is
|
||
|
|
'false' or if no hostname is known."
|
||
|
|
::= { prvtIsisISAdjEntry 16 }
|
||
|
|
|
||
|
|
prvtIsisISAdjNeighLanIDHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisISAdjNeighLanID object.
|
||
|
|
|
||
|
|
This is the null string if the prvtIsisISAdjNeighLanID object
|
||
|
|
is null, if prvtIsisSdEntMapHostnames is 'false', or if no
|
||
|
|
hostname is known."
|
||
|
|
::= { prvtIsisISAdjEntry 17 }
|
||
|
|
|
||
|
|
prvtIsisISAdjAreaAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisISAdjAreaAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the set of Area Addresses of
|
||
|
|
neighboring Intermediate Systems as reported in received
|
||
|
|
IIH PDUs."
|
||
|
|
REFERENCE
|
||
|
|
"{ISIS.aoi areaAddressesOfNeighbour (84)}"
|
||
|
|
::= { prvtIsisISAdj 2 }
|
||
|
|
|
||
|
|
prvtIsisISAdjAreaAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISAdjAreaAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains one Area Address reported by a
|
||
|
|
neighboring Intermediate System in its IIH PDUs."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisCircIfIndex,
|
||
|
|
prvtIsisISAdjIndex, prvtIsisISAdjAreaAddrIndex }
|
||
|
|
::= { prvtIsisISAdjAreaAddrTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisISAdjAreaAddrEntry ::= SEQUENCE {
|
||
|
|
prvtIsisISAdjAreaAddrIndex Integer32,
|
||
|
|
prvtIsisISAdjAreaAddress PrvtIsisOSINSAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisISAdjAreaAddrIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2000000000)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index for the areas associated with one neighbor.
|
||
|
|
This provides a simple way to walk the table."
|
||
|
|
::= { prvtIsisISAdjAreaAddrEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisISAdjAreaAddress OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOSINSAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"One Area Address as reported in IIH PDUs received from
|
||
|
|
the neighbor."
|
||
|
|
::= { prvtIsisISAdjAreaAddrEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisISAdjIPAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisISAdjIPAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the set of IP Addresses of
|
||
|
|
neighboring Intermediate Systems as reported in received
|
||
|
|
IIH PDUs.
|
||
|
|
|
||
|
|
If the prvtIsisSysRstrctLanAdjsToSubnet object in prvtIsisSysTable
|
||
|
|
is set to 'true' then for an IPv4 broadcast circuit, only
|
||
|
|
IP addresses on the same subnet as the local circuit are
|
||
|
|
included in this table."
|
||
|
|
::= { prvtIsisISAdj 3 }
|
||
|
|
|
||
|
|
prvtIsisISAdjIPAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISAdjIPAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains one IP Address reported by a
|
||
|
|
neighboring Intermediate System in its IIH PDUs."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisCircIfIndex,
|
||
|
|
prvtIsisISAdjIndex, prvtIsisISAdjIPAddrIndex }
|
||
|
|
::= { prvtIsisISAdjIPAddrTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisISAdjIPAddrEntry ::= SEQUENCE {
|
||
|
|
prvtIsisISAdjIPAddrIndex Integer32,
|
||
|
|
prvtIsisISAdjIPAddrType PrvtIsisInetAddressType,
|
||
|
|
prvtIsisISAdjIPAddrAddress PrvtIsisInetAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisISAdjIPAddrIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2000000000)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index to this table which identifies the IP addresss
|
||
|
|
to which this entry belongs."
|
||
|
|
::= { prvtIsisISAdjIPAddrEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisISAdjIPAddrType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisInetAddressType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of one IP Address as reported in IIH PDUs
|
||
|
|
received from the neighbor."
|
||
|
|
::= { prvtIsisISAdjIPAddrEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisISAdjIPAddrAddress OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisInetAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"One IP Address as reported in IIH PDUs received from the
|
||
|
|
neighbor.
|
||
|
|
|
||
|
|
The type of this address is determined by the value of
|
||
|
|
the prvtIsisISAdjIPAddrType object."
|
||
|
|
::= { prvtIsisISAdjIPAddrEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisIPReachAddr OBJECT IDENTIFIER
|
||
|
|
::= { prvtIsisMIBObjects 8 }
|
||
|
|
|
||
|
|
prvtIsisIPRATable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisIPRAEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The table of IP Reachable Addresses to networks,
|
||
|
|
subnetworks or hosts, learned automatically.
|
||
|
|
|
||
|
|
This table is read-only. Manual addition of entries
|
||
|
|
using this table is not supported."
|
||
|
|
::= { prvtIsisIPReachAddr 1 }
|
||
|
|
|
||
|
|
prvtIsisIPRAEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisIPRAEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry defines an IP Reachable Address to a network,
|
||
|
|
subnetwork or host.
|
||
|
|
|
||
|
|
Each IP Reachable Address may have multiple entries in the
|
||
|
|
table, one for each equal cost path to the reachable address."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisIPRADestType,
|
||
|
|
prvtIsisIPRADest, prvtIsisIPRADestPrefixLen,
|
||
|
|
prvtIsisIPRANextHopIndex }
|
||
|
|
::= { prvtIsisIPRATable 1 }
|
||
|
|
|
||
|
|
PrvtIsisIPRAEntry ::= SEQUENCE {
|
||
|
|
prvtIsisIPRADestType PrvtIsisInetAddressType,
|
||
|
|
prvtIsisIPRADest PrvtIsisInetAddress,
|
||
|
|
prvtIsisIPRADestPrefixLen InetAddressPrefixLength,
|
||
|
|
prvtIsisIPRANextHopIndex Integer32,
|
||
|
|
prvtIsisIPRANextHopType PrvtIsisInetAddressType,
|
||
|
|
prvtIsisIPRANextHop PrvtIsisInetAddress,
|
||
|
|
prvtIsisIPRAType INTEGER,
|
||
|
|
prvtIsisIPRAAdminState PrvtIsisAdminState,
|
||
|
|
prvtIsisIPRAMetric PrvtIsisDefaultMetric,
|
||
|
|
prvtIsisIPRAMetricType PrvtIsisMetricType,
|
||
|
|
prvtIsisIPRAFullMetric PrvtIsisFullMetric,
|
||
|
|
prvtIsisIPRASNPAAddress PrvtIsisOSINSAddress,
|
||
|
|
prvtIsisIPRASourceType INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisIPRADestType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisInetAddressType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of this IP Reachable Address."
|
||
|
|
::= { prvtIsisIPRAEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisIPRADest OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisInetAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The destination of this IP Reachable Address. This is
|
||
|
|
either a network address, subnetwork address or host
|
||
|
|
address.
|
||
|
|
|
||
|
|
The type of this address is determined by the value of
|
||
|
|
the prvtIsisIPRADestType object."
|
||
|
|
::= { prvtIsisIPRAEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisIPRADestPrefixLen OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressPrefixLength (0..128)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of the IP Netmask for Reachability Address."
|
||
|
|
::= { prvtIsisIPRAEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisIPRANextHopIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Index of next hop. Used when there are multiple Equal
|
||
|
|
Cost Multipath alternatives for the same destination."
|
||
|
|
::= { prvtIsisIPRAEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisIPRANextHopType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisInetAddressType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of the IP next hop address."
|
||
|
|
::= { prvtIsisIPRAEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisIPRANextHop OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisInetAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP next hop to this destination.
|
||
|
|
|
||
|
|
The type of this address is determined by the value of
|
||
|
|
the prvtIsisIPRANextHopType object."
|
||
|
|
::= { prvtIsisIPRAEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisIPRAType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { manual(1), automatic(2) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of this IP Reachable Address. Those of type
|
||
|
|
manual are created by the network manager. Those of type
|
||
|
|
automatic are created through propagation of routing
|
||
|
|
information from another routing protocol.
|
||
|
|
|
||
|
|
Currently only automatic entries in this table are supported."
|
||
|
|
::= { prvtIsisIPRAEntry 7 }
|
||
|
|
|
||
|
|
prvtIsisIPRAAdminState OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisAdminState
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative state of the IP Reachable Address."
|
||
|
|
::= { prvtIsisIPRAEntry 9 }
|
||
|
|
|
||
|
|
prvtIsisIPRAMetric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisDefaultMetric
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The metric value for reaching the specified
|
||
|
|
destination over this circuit."
|
||
|
|
::= { prvtIsisIPRAEntry 10 }
|
||
|
|
|
||
|
|
prvtIsisIPRAMetricType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisMetricType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether the metric is internal or
|
||
|
|
external."
|
||
|
|
::= { prvtIsisIPRAEntry 11 }
|
||
|
|
|
||
|
|
prvtIsisIPRAFullMetric OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisFullMetric
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The wide metric value for reaching the specified
|
||
|
|
destination over this circuit."
|
||
|
|
::= { prvtIsisIPRAEntry 12 }
|
||
|
|
|
||
|
|
prvtIsisIPRASNPAAddress OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisOSINSAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SNPA Address to which a PDU may be forwarded in
|
||
|
|
order to reach a destination which matches this IP
|
||
|
|
Reachable Address.
|
||
|
|
This field is currently not supported."
|
||
|
|
::= { prvtIsisIPRAEntry 13 }
|
||
|
|
|
||
|
|
prvtIsisIPRASourceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { static(1), direct(2), ospfv2(3), ospfv3(4),
|
||
|
|
isis(5), rip(6), igrp(7), eigrp(8), bgp(9),
|
||
|
|
other(10) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The origin of this route."
|
||
|
|
::= { prvtIsisIPRAEntry 14 }
|
||
|
|
|
||
|
|
prvtIsisLSPDataBase OBJECT IDENTIFIER
|
||
|
|
::= { prvtIsisMIBObjects 9 }
|
||
|
|
|
||
|
|
prvtIsisLSPSummaryTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisLSPSummaryEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The table of LSP Headers."
|
||
|
|
::= { prvtIsisLSPDataBase 1 }
|
||
|
|
|
||
|
|
prvtIsisLSPSummaryEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLSPSummaryEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry provides a summary describing an
|
||
|
|
LSP currently stored in the system."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisLSPLevel, prvtIsisLSPID }
|
||
|
|
::= { prvtIsisLSPSummaryTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisLSPSummaryEntry ::= SEQUENCE {
|
||
|
|
prvtIsisLSPLevel PrvtIsisISLevel,
|
||
|
|
prvtIsisLSPID PrvtIsisLinkStatePDUID,
|
||
|
|
prvtIsisLSPSeq Unsigned32,
|
||
|
|
prvtIsisLSPZeroLife TruthValue,
|
||
|
|
prvtIsisLSPChecksum PrvtIsisUnsigned16TC,
|
||
|
|
prvtIsisLSPLifetimeRemain PrvtIsisUnsigned16TC,
|
||
|
|
prvtIsisLSPPDULength PrvtIsisUnsigned16TC,
|
||
|
|
prvtIsisLSPAttributes PrvtIsisUnsigned8TC,
|
||
|
|
prvtIsisLSPIDHostname PrvtIsisHostName
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisLSPLevel OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisISLevel
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"At which level does this LSP appear?"
|
||
|
|
::= { prvtIsisLSPSummaryEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisLSPID OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLinkStatePDUID
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The 8-byte LSP ID, consisting of the SystemID,
|
||
|
|
Circuit ID, and Fragment Number."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisLSPSeq OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The sequence number for this LSP."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisLSPZeroLife OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is this LSP being purged by this System?"
|
||
|
|
::= { prvtIsisLSPSummaryEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisLSPChecksum OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16TC
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The 16 bit Fletcher Checksum for this LSP."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisLSPLifetimeRemain OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16TC
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remaining lifetime in seconds for this LSP.
|
||
|
|
|
||
|
|
For a current LSP (prvtIsisLSPZeroLife is 'false'), this
|
||
|
|
indicates the time remaining before the LSP will expire.
|
||
|
|
For an LSP being purged from the system (prvtIsisLSPZeroLife
|
||
|
|
is 'true'), the LSP remains in the database for
|
||
|
|
ZeroAgeLifetime, and this will indicate the time remaining
|
||
|
|
before final deletion of the LSP."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisLSPPDULength OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16TC
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of this LSP."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 7 }
|
||
|
|
|
||
|
|
prvtIsisLSPAttributes OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned8TC
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Flags carried by the LSP."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 8 }
|
||
|
|
|
||
|
|
prvtIsisLSPIDHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisLSPID object.
|
||
|
|
|
||
|
|
This is the null string if no hostname is known."
|
||
|
|
::= { prvtIsisLSPSummaryEntry 9 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtIsisLSPTLVEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The table of LSPs in the database."
|
||
|
|
::= { prvtIsisLSPDataBase 2 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisLSPTLVEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry describes a TLV within
|
||
|
|
an LSP currently stored in the
|
||
|
|
system."
|
||
|
|
INDEX { prvtIsisSysInstance, prvtIsisLSPLevel, prvtIsisLSPID,
|
||
|
|
prvtIsisLSPTLVIndex }
|
||
|
|
::= { prvtIsisLSPTLVTable 1 }
|
||
|
|
|
||
|
|
PrvtIsisLSPTLVEntry ::= SEQUENCE {
|
||
|
|
prvtIsisLSPTLVIndex Unsigned32,
|
||
|
|
prvtIsisLSPTLVSeq Unsigned32,
|
||
|
|
prvtIsisLSPTLVChecksum PrvtIsisUnsigned16TC,
|
||
|
|
prvtIsisLSPTLVType PrvtIsisUnsigned8TC,
|
||
|
|
prvtIsisLSPTLVLen PrvtIsisUnsigned8TC,
|
||
|
|
prvtIsisLSPTLVValue OCTET STRING,
|
||
|
|
prvtIsisLSPTLVHostname PrvtIsisHostName
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtIsisLSPTLVIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of this TLV in the LSP. The first TLV has index 1
|
||
|
|
and the Nth TLV has an index of N."
|
||
|
|
::= { prvtIsisLSPTLVEntry 1 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVSeq OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The sequence number for this LSP."
|
||
|
|
::= { prvtIsisLSPTLVEntry 2 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVChecksum OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned16TC
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The 16 bit Fletcher Checksum for this LSP."
|
||
|
|
::= { prvtIsisLSPTLVEntry 3 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVType OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned8TC
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of this TLV."
|
||
|
|
::= { prvtIsisLSPTLVEntry 4 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVLen OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisUnsigned8TC
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of this TLV."
|
||
|
|
::= { prvtIsisLSPTLVEntry 5 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVValue OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this TLV."
|
||
|
|
::= { prvtIsisLSPTLVEntry 6 }
|
||
|
|
|
||
|
|
prvtIsisLSPTLVHostname OBJECT-TYPE
|
||
|
|
SYNTAX PrvtIsisHostName
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hostname corresponding to the system ID part of the
|
||
|
|
prvtIsisLSPID object.
|
||
|
|
|
||
|
|
This is the null string if no hostname is known."
|
||
|
|
::= { prvtIsisLSPTLVEntry 7 }
|
||
|
|
|
||
|
|
END -- end of module PRVT-ISIS-MIB.
|