mibs/MIBS/transition/TN-PTP-MIB

973 lines
31 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- ***********************************************************************************************
-- TN-PTP-MIB.smi: Transition Networks Enterprise MIB for TN device SyncE feature
--
-- Copyright (c) 2013 by Transition Networks, Inc.
-- All rights reserved.
--
-- ***********************************************************************************************
--
TN-PTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
TruthValue, RowStatus
FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-IDENTITY,
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
entPhysicalIndex FROM ENTITY-MIB
tnProducts FROM TRANSITION-SMI;
tnPtpMIB MODULE-IDENTITY
LAST-UPDATED "201311110000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
" Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The mib provides functionalities for managing PTP."
REVISION "201311110000Z"
DESCRIPTION
"Initial Revision of this module"
::= { tnProducts 123 }
tnPtp OBJECT IDENTIFIER ::= { tnPtpMIB 1 }
--
-- PTP Clock Modes
--
tnPtpClkModesTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpClkModesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SyncE External I/O"
::= { tnPtp 1 }
tnPtpClkModesEntry OBJECT-TYPE
SYNTAX TnPtpClkModesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpClkModesTable"
INDEX { entPhysicalIndex }
::= { tnPtpClkModesTable 1 }
TnPtpClkModesEntry ::= SEQUENCE
{
tnPtpInState INTEGER,
tnPtpOutState INTEGER,
tnPtpInFreq INTEGER,
tnPtpOutFreq INTEGER,
tnPtpImpedance INTEGER,
tnPtpActualInFreq INTEGER,
tnPtpActualOutFreq INTEGER
}
tnPtpInState OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IEEE 1588 Input State."
::= { tnPtpClkModesEntry 1 }
tnPtpOutState OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IEEE 1588 Output State."
::= { tnPtpClkModesEntry 2 }
tnPtpInFreq OBJECT-TYPE
SYNTAX INTEGER
{
onePps(0),
f8kHz(1),
f64kHz(2),
f1544kHz(3),
f2048kHz(4),
f10000kHz(5),
f19440kHz(6),
f25Mhz(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clock frequency 1 PPS or
8k-25Mhz table of values."
::= { tnPtpClkModesEntry 3 }
tnPtpOutFreq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The following values are possible:
Editable value with the possible range of values are 1 - 25000000 (1 - 25MHz)."
::= { tnPtpClkModesEntry 4 }
tnPtpImpedance OBJECT-TYPE
SYNTAX INTEGER
{
imp50(1),
imp75(2),
hi-Z(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select the impedance termination of the input clock.
The following values are possible:
1. 50 : 50 ohm impedance.
2. 75 : 75 ohm impedance.
3. Hi-Z : no impedance termination driven, tri-stated or floating."
::= { tnPtpClkModesEntry 5 }
tnPtpActualInFreq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual input frequency in Hz."
::= { tnPtpClkModesEntry 6 }
tnPtpActualOutFreq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual output frequency in Hz. If output state is disabled set to 0"
::= { tnPtpClkModesEntry 7 }
--
-- PTP Add New Clk Configuration
--
tnPtpCreateClkConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpCreateClkConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTP ClkInstance"
::= { tnPtp 2 }
tnPtpCreateClkConfEntry OBJECT-TYPE
SYNTAX TnPtpCreateClkConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpCreateClkConfTable"
INDEX { tnPtpCreateClkConfIndex }
::= { tnPtpCreateClkConfTable 1 }
TnPtpCreateClkConfEntry ::= SEQUENCE
{
tnPtpCreateClkConfIndex INTEGER,
tnPtpDeviceType INTEGER,
tnPtpTwoStepFlag TruthValue,
tnPtpClockId OCTET STRING,
tnPtpOneWay TruthValue,
tnPtpProtocol INTEGER,
tnPtpVLANTag TruthValue,
tnPtpVID INTEGER,
tnPtpPCP INTEGER,
tnPtpClkConfRowStatus RowStatus
}
tnPtpCreateClkConfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of ptp clocks."
::= { tnPtpCreateClkConfEntry 1 }
tnPtpDeviceType OBJECT-TYPE
SYNTAX INTEGER
{
inactive(0),
ordBound(1),
p2pTransp(2),
e2eTransp(3),
masterOnly(4),
slaveOnly(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the Type of the Clock Instance. There are five Device Types.
1. Ord-Bound - clock's Device Type is Ordinary-Boundary Clock.
2. P2p Transp - clock's Device Type is Peer to Peer Transparent Clock.
3. E2e Transp - clock's Device Type is End to End Transparent Clock.
4. Master Only - clock's Device Type is Master Only.
5. Slave Only - clock's Device Type is Slave Only."
::= { tnPtpCreateClkConfEntry 2 }
tnPtpTwoStepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Static member: defined by the system, true if two-step Sync events and Pdelay_Resp events are used."
::= { tnPtpCreateClkConfEntry 3 }
tnPtpClockId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique clock identifier."
::= { tnPtpCreateClkConfEntry 4 }
tnPtpOneWay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If true, one-way measurements are used. This parameter applies only to a slave. In one-way mode no delay
measurements are performed, i.e. this is applicable only if frequency synchronization is needed. The master always responds to delay requests.."
::= { tnPtpCreateClkConfEntry 5 }
tnPtpProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ethernet(0),
ipv4multi(1),
ipv4uni(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Transport protocol used by the PTP protocol engine
ethernet PTP over Ethernet multicast
ip4multi PTP over IPv4 multicast
ip4uni PTP over IPv4 unicast
Note : IPv4 unicast protocol only works in Master only and Slave only clocks
See parameter Device Type
In a unicast Slave only clock you also need configure which master clocks
to request Announce and Sync messages from. See: Unicast Slave Configuration."
::= { tnPtpCreateClkConfEntry 6 }
tnPtpVLANTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Enables the VLAN tagging for the PTP frames.
Note: Packets are only tagged if the port is configured for vlan tagging. i.e:
Port Type != Unaware and PortVLAN mode == None, and the port is member of the VLAN."
::= { tnPtpCreateClkConfEntry 7 }
tnPtpVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "VLAN Identifier used for tagging the PTP frames."
::= { tnPtpCreateClkConfEntry 8 }
tnPtpPCP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Priority Code Point value used for PTP frames."
::= { tnPtpCreateClkConfEntry 9 }
tnPtpClkConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated."
::= { tnPtpCreateClkConfEntry 10 }
--
-- PTP Clk Configuration 0
--
tnPtpClkConf0Table OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpClkConf0Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTP ClkInstance"
::= { tnPtp 3 }
tnPtpClkConf0Entry OBJECT-TYPE
SYNTAX TnPtpClkConf0Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpClkConf0Table"
INDEX { tnPtpClkConf0Index }
::= { tnPtpClkConf0Table 1 }
TnPtpClkConf0Entry ::= SEQUENCE
{
tnPtpClkConf0Index INTEGER,
tnPtpDefaultDom INTEGER,
tnPtpDefaultClockQuality OCTET STRING,
tnPtpDefaultPri1 INTEGER,
tnPtpDefaultPri2 INTEGER,
tnPtpTime OCTET STRING,
tnPtpAdjustMethod INTEGER,
tnPtpSynce INTEGER,
}
tnPtpClkConf0Index OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]."
::= { tnPtpClkConf0Entry 1 }
tnPtpDefaultDom OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clock domain [0..127]."
::= { tnPtpClkConf0Entry 2 }
tnPtpDefaultClockQuality OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588.
The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock Accuracy is set to 'Unknown' as default)."
::= { tnPtpClkConf0Entry 3 }
tnPtpDefaultPri1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clock priority 1 [0..255] used by the BMC master select algorithm."
::= { tnPtpClkConf0Entry 4 }
tnPtpDefaultPri2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clock priority 2 [0..255] used by the BMC master select algorithm."
::= { tnPtpClkConf0Entry 5 }
tnPtpTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the actual PTP time with nanosecond resolution."
::= { tnPtpClkConf0Entry 6 }
tnPtpAdjustMethod OBJECT-TYPE
SYNTAX INTEGER
{
internal(1),
vcxo(2),
software(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the actual clock adjustment method. The method depends on the available hardware."
::= { tnPtpClkConf0Entry 7 }
tnPtpSynce OBJECT-TYPE
SYNTAX INTEGER
{
doNothing(1),
sync(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Activate to synchronize the System Clock to PTP Time."
::= { tnPtpClkConf0Entry 8 }
--
-- PTP Clk Configuration 1
--
tnPtpClkConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpClkConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTP ClkInstance"
::= { tnPtp 4 }
tnPtpClkConfEntry OBJECT-TYPE
SYNTAX TnPtpClkConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpClkConfTable"
INDEX { tnPtpClkConfIndex }
::= { tnPtpClkConfTable 1 }
TnPtpClkConfEntry ::= SEQUENCE
{
tnPtpClkConfIndex INTEGER,
tnPtpStpRm INTEGER,
tnPtpOffset OCTET STRING,
tnPtpPathDelay OCTET STRING,
tnPtpDelayFilter INTEGER,
tnPtpFilterPeriod INTEGER,
tnPtpFilterDist INTEGER,
tnPtpParentPortId OCTET STRING,
tnPtpParentPort INTEGER,
tnPtpParentPStat TruthValue,
tnPtpParentVar INTEGER,
tnPtpParentChgRate INTEGER,
tnPtpParentGMId OCTET STRING,
tnPtpParentGMQual OCTET STRING,
tnPtpParentPri1 INTEGER,
tnPtpParentPri2 INTEGER
}
tnPtpClkConfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]."
::= { tnPtpClkConfEntry 1 }
tnPtpStpRm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock."
::= { tnPtpClkConfEntry 2 }
tnPtpOffset OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time difference between the master clock and the local slave clock, measured in ns."
::= { tnPtpClkConfEntry 3 }
tnPtpPathDelay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean propagation time for the link between the master and the local slave."
::= { tnPtpClkConfEntry 4 }
tnPtpDelayFilter OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default delay filter is a low pass filter, with a time constant of 2**DelayFilter*DelayRequestRate.
The value must be in the range of 1..6."
::= { tnPtpClkConfEntry 5 }
tnPtpFilterPeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default offset filter uses a minimum delay filter method
i.e. The minimum measured offset during Period samples is used in the calculation.
The value must be in the range of 1..1000."
::= { tnPtpClkConfEntry 6 }
tnPtpFilterDist OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The distance between two calculations is Dist periods.
Note: In configurations with Timestamp enabled PHYs, the period is automatically increased, if (period*dist < SyncPackets pr sec/4),
i.e. max 4 adjustments are made pr sec.
If Dist is 1 the offset is averaged over the Period,
If Dist is >1 the offset is calculated using 'min' offset.
The value must be in the range of 1..10"
::= { tnPtpClkConfEntry 7 }
tnPtpParentPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id."
::= { tnPtpClkConfEntry 8 }
tnPtpParentPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port Id for the parent master port."
::= { tnPtpClkConfEntry 9 }
tnPtpParentPStat OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Parents Stats (always false)."
::= { tnPtpClkConfEntry 10 }
tnPtpParentVar OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is observed parent offset scaled log variance."
::= { tnPtpClkConfEntry 11 }
tnPtpParentChgRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master. (unit = ns per s)."
::= { tnPtpClkConfEntry 12 }
tnPtpParentGMId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id."
::= { tnPtpClkConfEntry 13 }
tnPtpParentGMQual OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The clock quality announced by the grand master."
::= { tnPtpClkConfEntry 14 }
tnPtpParentPri1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clock priority 1 announced by the grand master."
::= { tnPtpClkConfEntry 15 }
tnPtpParentPri2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clock priority 2 announced by the grand master."
::= { tnPtpClkConfEntry 16 }
--
-- PTP Clk Configuration 2
--
tnPtpClkConf2Table OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpClkConf2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table 2 of PTP ClkInstance"
::= { tnPtp 5 }
tnPtpClkConf2Entry OBJECT-TYPE
SYNTAX TnPtpClkConf2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpClkConf2Table"
INDEX { tnPtpClkConfIndex2 }
::= { tnPtpClkConf2Table 1 }
TnPtpClkConf2Entry ::= SEQUENCE
{
tnPtpClkConfIndex2 INTEGER,
tnPtpUtcOffset INTEGER,
tnPtpValid TruthValue,
tnPtpLeap59 TruthValue,
tnPtpLeap61 TruthValue,
tnPtpTimeTrac TruthValue,
tnPtpFreqTrac TruthValue,
tnPtpTimeScale TruthValue,
tnPtpTimeSource INTEGER,
tnPtpDisplay TruthValue,
tnPtpPEnable TruthValue,
tnPtpIEnable TruthValue,
tnPtpDEnable TruthValue,
tnPtpPConstant INTEGER,
tnPtpIConstant INTEGER,
tnPtpDConstant INTEGER,
tnPtpServoDelayFilter INTEGER
}
tnPtpClkConfIndex2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]."
::= { tnPtpClkConf2Entry 1 }
tnPtpUtcOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Unicast Offset must be an integer value between 0 and 10000."
::= { tnPtpClkConf2Entry 2 }
tnPtpValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Valid."
::= { tnPtpClkConf2Entry 3 }
tnPtpLeap59 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Leap 59."
::= { tnPtpClkConf2Entry 4 }
tnPtpLeap61 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Leap 61."
::= { tnPtpClkConf2Entry 5 }
tnPtpTimeTrac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time Trac."
::= { tnPtpClkConf2Entry 6 }
tnPtpFreqTrac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Freq Trac."
::= { tnPtpClkConf2Entry 7 }
tnPtpTimeScale OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time Scale."
::= { tnPtpClkConf2Entry 8 }
tnPtpTimeSource OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time Source. Value of 0-255"
::= { tnPtpClkConf2Entry 9 }
tnPtpDisplay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal."
::= { tnPtpClkConf2Entry 10 }
tnPtpPEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If true the P part of the algorithm is included."
::= { tnPtpClkConf2Entry 11 }
tnPtpIEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If true the I part of the algorithm is included."
::= { tnPtpClkConf2Entry 12 }
tnPtpDEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If true the D part of the algorithm is included."
::= { tnPtpClkConf2Entry 13 }
tnPtpPConstant OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default clock servo uses a PID regulator to calculate the current clock rate. i.e.
clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMaster)/ I constant +
Differential OffsetFromMaster)/ D constant [1..1000]."
::= { tnPtpClkConf2Entry 14 }
tnPtpIConstant OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default clock servo uses a PID regulator to calculate the current clock rate. i.e.
clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMaster)/ I constant +
Differential OffsetFromMaster)/ D constant [1..10000]."
::= { tnPtpClkConf2Entry 15 }
tnPtpDConstant OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default clock servo uses a PID regulator to calculate the current clock rate. i.e.
clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMaster)/ I constant +
Differential OffsetFromMaster)/ D constant [1..10000]."
::= { tnPtpClkConf2Entry 16 }
tnPtpServoDelayFilter OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default delay filter is a low pass filter, with a time constant of 2**DelayFilter*DelayRequestRate.
This is for the custom filter."
::= { tnPtpClkConf2Entry 17 }
--
-- PTP Unicast Slave Config
--
tnPtpUnicastSlaveTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpUnicastSlaveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTP Unicast Slave"
::= { tnPtp 6 }
tnPtpUnicastSlaveEntry OBJECT-TYPE
SYNTAX TnPtpUnicastSlaveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpUnicastSlaveTable"
INDEX { tnPtpUnicastInstIndex, tnPtpUnicastSlaveIndex }
::= { tnPtpUnicastSlaveTable 1 }
TnPtpUnicastSlaveEntry ::= SEQUENCE
{
tnPtpUnicastInstIndex INTEGER,
tnPtpUnicastSlaveIndex INTEGER,
tnPtpUnicastDuration INTEGER,
tnPtpIPAddress InetAddress,
tnPtpGrant INTEGER,
tnPtpCommState INTEGER
}
tnPtpUnicastInstIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the Instance of a particular Clock Instance [0..3]."
::= { tnPtpUnicastSlaveEntry 1 }
tnPtpUnicastSlaveIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the Instance of a particular Unicast Slave [0..4]."
::= { tnPtpUnicastSlaveEntry 2 }
tnPtpUnicastDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of seconds a master is requested to send Announce/Sync messages.
The request is repeated from the slave each Duration/4 seconds. [10..1000]."
::= { tnPtpUnicastSlaveEntry 3 }
tnPtpIPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv4 Address of the Master clock."
::= { tnPtpUnicastSlaveEntry 4 }
tnPtpGrant OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The granted repetition period for the sync message."
::= { tnPtpUnicastSlaveEntry 5 }
tnPtpCommState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
init(2),
conn(3),
sell(4),
sync(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The state of the communication with the master, possible values are:
IDLE : The entry is not in use.
INIT : Announce is sent to the master (Waiting for a response).
CONN : The master has responded.
SELL : The assigned master is selected as current master.
SYNC : The master is sending Sync messages."
::= { tnPtpUnicastSlaveEntry 6 }
--
-- PTP Clock Port Data Set Configuration
--
tnPtpPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPtpPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PTP Clock Port Data Set Configuration"
::= { tnPtp 7 }
tnPtpPortConfEntry OBJECT-TYPE
SYNTAX TnPtpPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table,tnPtpPortConfTable"
INDEX { tnPtpPortConfInstIndex, tnPtpPortConfIndex }
::= { tnPtpPortConfTable 1 }
TnPtpPortConfEntry ::= SEQUENCE
{
tnPtpPortConfInstIndex INTEGER,
tnPtpPortConfIndex INTEGER,
tnPtpStat OCTET STRING,
tnPtpMDR INTEGER,
tnPtpMeanPath OCTET STRING,
tnPtpAnv INTEGER,
tnPtpATO INTEGER,
tnPtpSyv INTEGER,
tnPtpSyncIntErr TruthValue,
tnPtpDim INTEGER,
tnPtpMPR INTEGER,
tnPtpDelayAsym INTEGER,
tnPtpIngerssLat INTEGER,
tnPtpEgressLat INTEGER,
tnPtpVersion INTEGER,
tnPtpPortConfRowStatus RowStatus
}
tnPtpPortConfInstIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the Instance of a particular Clock Instance [0..3]."
::= { tnPtpPortConfEntry 1 }
tnPtpPortConfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Static member port Identity : Port number [1..max port no]."
::= { tnPtpPortConfEntry 2 }
tnPtpStat OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dynamic member portState: Current state of the port."
::= { tnPtpPortConfEntry 3 }
tnPtpMDR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dynamic member log Min Delay Req Interval: The delay request interval announced by the master."
::= { tnPtpPortConfEntry 4 }
tnPtpMeanPath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The path delay measured by the port in P2P mode. In E2E mode this value is 0."
::= { tnPtpPortConfEntry 5 }
tnPtpAnv OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The interval for issuing announce messages in master state. [-3..4]"
::= { tnPtpPortConfEntry 6 }
tnPtpATO OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The timeout for receiving announce messages on the port. [-1..10]"
::= { tnPtpPortConfEntry 7 }
tnPtpSyv OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The interval for issuing sync messages in master. [-7..4]"
::= { tnPtpPortConfEntry 8 }
tnPtpSyncIntErr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Synce Interval Error truth value"
::= { tnPtpPortConfEntry 9 }
tnPtpDim OBJECT-TYPE
SYNTAX INTEGER
{
e2e(1),
p2p(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Configurable member delayMechanism: The delay mechanism used for the port:
e2e End to end delay measurement
p2p Peer to peer delay measurement.
Can be defined per port in an Ordinary/Boundary clock.
In a transparent clock all ports use the same delay mechanism, determined by the clock type."
::= { tnPtpPortConfEntry 10 }
tnPtpMPR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The interval for issuing Delay_Req messages for the port in E2e mode.
This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave
The interval for issuing Pdelay_Req messages for the port in P2P mode
Note: The interpretation of this parameter has changed from release 2.40.
In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval.
I.e. MPR = 0 =>1 Delay_Req pr sec, independent of the Sync rate. [-7..5]"
::= { tnPtpPortConfEntry 11 }
tnPtpDelayAsym OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the transmission delay for a link in not symmetric, the asymmetry can be configured here,
see IEEE 1588 Section 7.4.2 Communication path asymmetry. [-100000..100000]"
::= { tnPtpPortConfEntry 12 }
tnPtpIngerssLat OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. [-100000..100000]"
::= { tnPtpPortConfEntry 13 }
tnPtpEgressLat OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. [-100000..100000]"
::= { tnPtpPortConfEntry 14 }
tnPtpVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The current implementation only supports PTP version 2."
::= { tnPtpPortConfEntry 15 }
tnPtpPortConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { tnPtpPortConfEntry 16 }
END