david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
David Leutgeb
2023-12-05 12:25:34 +01:00
commit 98a672123c
4378 changed files with 8817503 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

943
MIBS/cisco/CISCO-ENTITY-SENSOR-MIB Normal file
View File

@ -0,0 +1,943 @@
-- *****************************************************************
-- CISCO-ENTITY-SENSOR-MIB
--
-- November 1997, Cliff L. Sojourner
--
-- Copyright (c) 1998-2003-2006, 2013, 2015 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ENTITY-SENSOR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TimeStamp,
TruthValue
FROM SNMPv2-TC
entPhysicalIndex
FROM ENTITY-MIB
EntPhysicalIndexOrZero
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoEntitySensorMIB MODULE-IDENTITY
LAST-UPDATED "201501150000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 408 526 4000
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"The CISCO-ENTITY-SENSOR-MIB is used to monitor
the values of sensors in the Entity-MIB (RFC 2037)
entPhysicalTable."
REVISION "201501150000Z"
DESCRIPTION
"Corrected the definition of entSensorPrecision."
REVISION "201309210000Z"
DESCRIPTION
"Added entSensorThresholdRecoveryNotification to
entitySensorMIBNotifications.
Added entSensorThresholdSeverity as a varbind
object to entSensorThresholdNotification.
Added entitySensorNotificationGroup
and deprecated
entitySensorThresholdNotificationGroup.
Added entSensorThresholdNotification and
entSensorThresholdRecoveryNotification to
entitySensorNotificationGroup.
Added entitySensorMIBComplianceV05 and
deprecated entitySensorMIBComplianceV04."
REVISION "200711120000Z"
DESCRIPTION
"Added entitySensorNotifCtrlGlobalGroup."
REVISION "200601010000Z"
DESCRIPTION
"Add new object entSensorMeasuredEntity to
entSensorValueTable."
REVISION "200509080000Z"
DESCRIPTION
"Change the module descriptor name from entitySensorMIB
to ciscoEntitySensorMIB since ENTITY-SENSOR-MIB also
uses the same name and there is a conflict."
REVISION "200301070000Z"
DESCRIPTION
"[1] Add dBm(14) in SensorDataType."
REVISION "200210160000Z"
DESCRIPTION
"[1] Add critical(30) in CSensorThresholdSeverity.
[2] Change to MAX-ACCESS read-write for 3 objects.
[3] Add entitySensorMIBComplianceV02."
REVISION "200006200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 91 }
entitySensorMIBObjects OBJECT IDENTIFIER
::= { ciscoEntitySensorMIB 1 }
entitySensorMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoEntitySensorMIB 2 }
entitySensorMIBConformance OBJECT IDENTIFIER
::= { ciscoEntitySensorMIB 3 }
-- textual conventions
SensorDataType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"sensor measurement data types. valid values are:
other(1): a measure other than those listed below
unknown(2): unknown measurement, or
arbitrary, relative numbers
voltsAC(3): electric potential
voltsDC(4): electric potential
amperes(5): electric current
watts(6): power
hertz(7): frequency
celsius(8): temperature
percentRH(9): percent relative humidity
rpm(10): shaft revolutions per minute
cmm(11),: cubic meters per minute (airflow)
truthvalue(12): value takes { true(1), false(2) }
specialEnum(13): value takes user defined enumerated values
dBm(14): dB relative to 1mW of power"
SYNTAX INTEGER {
other(1),
unknown(2),
voltsAC(3),
voltsDC(4),
amperes(5),
watts(6),
hertz(7),
celsius(8),
percentRH(9),
rpm(10),
cmm(11),
truthvalue(12),
specialEnum(13),
dBm(14)
}
SensorDataScale ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"International System of Units (SI) prefixes."
SYNTAX INTEGER {
yocto(1), -- 10^-24
zepto(2), -- 10^-21
atto(3), -- 10^-18
femto(4), -- 10^-15
pico(5), -- 10^-12
nano(6), -- 10^-9
micro(7), -- 10^-6
milli(8), -- 10^-3
units(9), -- 10^0
kilo(10), -- 10^3
mega(11), -- 10^6
giga(12), -- 10^9
tera(13), -- 10^12
exa(14), -- 10^15
peta(15), -- 10^18
zetta(16), -- 10^21
yotta(17) -- 10^24
}
SensorPrecision ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"When in the range 1 to 9, SensorPrecision is the number
of decimal places in the fractional part of
a SensorValue fixed-point number. When in the range -8 to
-1, SensorPrecision is the number of accurate digits in
a SensorValue fixed-point number.
SensorPrecision is 0 for non-fixed-point numbers.
Agent implementors must choose a value for SensorPrecision
so that the precision and accuracy of a SensorValue is
correctly indicated.
For example, a temperature sensor that can measure 0o to
100o C in 0.1o increments, +/- 0.05o, would have a
SensorPrecision of 1, a SensorDataScale of units(0), and a
SensorValue ranging from 0 to 1000.
The SensorValue would be interpreted as (degrees C * 10).
If that temperature sensor's precision were 0.1o but its
accuracy were only +/- 0.5o, then the SensorPrecision would
be 0. The SensorValue would be interpreted as degrees C.
Another example: a fan rotation speed sensor that measures RPM
from 0 to 10,000 in 100 RPM increments, with an accuracy of
+50/-37 RPM, would have a SensorPrecision of -2, a
SensorDataScale of units(9), and a SensorValue ranging from 0
to 10000. The 10s and 1s digits of SensorValue would always
be 0."
SYNTAX INTEGER (-8..9)
SensorValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"For sensors that measure voltsAC, voltsDC,
amperes, watts, hertz, celsius, cmm
this item is a fixed point number ranging from
-999,999,999 to +999,999,999. Use the value
-1000000000 to indicate underflow. Use the value
+1000000000 to indicate overflow. Use SensorPrecision
to indicate how many fractional digits the SensorValue
has.
For sensors that measure percentRH, this item
is a number ranging from 0 to 100.
For sensors that measure rpm, this item
can take only nonnegative values, 0..999999999.
For sensors of type truthvalue, this item
can take only two values: true(1), false(2).
For sensors of type specialEnum, this item
can take any value in the range (-1000000000..1000000000),
but the meaning of each value is specific to the
sensor.
For sensors of type other and unknown,
this item can take any value in the range
(-1000000000..1000000000), but the meaning of the values
are specific to the sensor.
Use Entity-MIB entPhysicalTable.entPhysicalVendorType
to learn about the sensor type."
SYNTAX INTEGER (-1000000000..1000000000)
SensorStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the operational status of the sensor.
ok(1) means the agent can read the sensor
value.
unavailable(2) means that the agent presently
can not report the sensor value.
nonoperational(3) means that the agent believes
the sensor is broken. The sensor could have a
hard failure (disconnected wire), or a soft failure
such as out-of-range, jittery, or wildly fluctuating
readings."
SYNTAX INTEGER {
ok(1),
unavailable(2),
nonoperational(3)
}
SensorValueUpdateRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interval in seconds between updates to the
sensor's value.
The value zero indicates:
- the sensor value is updated on demand (when polled by the
agent for a get-request),
- or when the sensor value changes (event-driven),
- or the agent does not know the rate"
SYNTAX INTEGER (0..999999999)
SensorThresholdSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"sensor threshold severity. Valid values are:
other(1) : a severity other than those listed below.
minor(10) : Minor Problem threshold.
major(20) : Major Problem threshold.
critical(30): Critical problem threshold. A system might shut
down the sensor associated FRU automatically if
the sensor value reach the critical problem
threshold."
SYNTAX INTEGER {
other(1),
minor(10),
major(20),
critical(30)
}
SensorThresholdRelation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"sensor threshold relational operator types. valid values are:
lessThan(1): if the sensor value is less than
the threshold value
lessOrEqual(2): if the sensor value is less than or equal to
the threshold value
greaterThan(3): if the sensor value is greater than
the threshold value
greaterOrEqual(4): if the sensor value is greater than or equal
to the threshold value
equalTo(5): if the sensor value is equal to
the threshold value
notEqualTo(6): if the sensor value is not equal to
the threshold value"
SYNTAX INTEGER {
lessThan(1),
lessOrEqual(2),
greaterThan(3),
greaterOrEqual(4),
equalTo(5),
notEqualTo(6)
}
-- MIB variables
entSensorValues OBJECT IDENTIFIER
::= { entitySensorMIBObjects 1 }
entSensorThresholds OBJECT IDENTIFIER
::= { entitySensorMIBObjects 2 }
entSensorGlobalObjects OBJECT IDENTIFIER
::= { entitySensorMIBObjects 3 }
-- entSensorValueTable
entSensorValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF EntSensorValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the type, scale, and present value
of a sensor listed in the Entity-MIB entPhysicalTable."
::= { entSensorValues 1 }
entSensorValueEntry OBJECT-TYPE
SYNTAX EntSensorValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entSensorValueTable entry describes the
present reading of a sensor, the measurement units
and scale, and sensor operational status."
INDEX { entPhysicalIndex }
::= { entSensorValueTable 1 }
EntSensorValueEntry ::= SEQUENCE {
entSensorType SensorDataType,
entSensorScale SensorDataScale,
entSensorPrecision SensorPrecision,
entSensorValue SensorValue,
entSensorStatus SensorStatus,
entSensorValueTimeStamp TimeStamp,
entSensorValueUpdateRate SensorValueUpdateRate,
entSensorMeasuredEntity EntPhysicalIndexOrZero
}
entSensorType OBJECT-TYPE
SYNTAX SensorDataType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the type of data
reported by the entSensorValue.
This variable is set by the agent at start-up
and the value does not change during operation."
::= { entSensorValueEntry 1 }
entSensorScale OBJECT-TYPE
SYNTAX SensorDataScale
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the exponent to apply
to sensor values reported by entSensorValue.
This variable is set by the agent at start-up
and the value does not change during operation."
::= { entSensorValueEntry 2 }
entSensorPrecision OBJECT-TYPE
SYNTAX SensorPrecision
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the number of decimal
places of precision in fixed-point
sensor values reported by entSensorValue.
This variable is set to 0 when entSensorType
is not a fixed-point type: e.g.'percentRH(9)',
'rpm(10)', 'cmm(11)', or 'truthvalue(12)'.
This variable is set by the agent at start-up
and the value does not change during operation."
::= { entSensorValueEntry 3 }
entSensorValue OBJECT-TYPE
SYNTAX SensorValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable reports the most recent measurement seen
by the sensor.
To correctly display or interpret this variable's value,
you must also know entSensorType, entSensorScale, and
entSensorPrecision.
However, you can compare entSensorValue with the threshold
values given in entSensorThresholdTable without any semantic
knowledge."
::= { entSensorValueEntry 4 }
entSensorStatus OBJECT-TYPE
SYNTAX SensorStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the present operational status
of the sensor."
::= { entSensorValueEntry 5 }
entSensorValueTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the age of the value reported by
entSensorValue"
::= { entSensorValueEntry 6 }
entSensorValueUpdateRate OBJECT-TYPE
SYNTAX SensorValueUpdateRate
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the rate that the agent
updates entSensorValue."
::= { entSensorValueEntry 7 }
entSensorMeasuredEntity OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the physical entity for which the
sensor is taking measurements. For example, for a sensor
measuring the voltage output of a power-supply, this object
would be the entPhysicalIndex of that power-supply; for a sensor
measuring the temperature inside one chassis of a multi-chassis
system, this object would be the enPhysicalIndex of that
chassis.
This object has a value of zero when the physical entity
for which the sensor is taking measurements can not be
represented by any one row in the entPhysicalTable, or that
there is no such physical entity."
::= { entSensorValueEntry 8 }
-- entSensorThresholdTable
entSensorThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF EntSensorThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the threshold severity, relation, and
comparison value, for a sensor listed in the Entity-MIB
entPhysicalTable."
::= { entSensorThresholds 1 }
entSensorThresholdEntry OBJECT-TYPE
SYNTAX EntSensorThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entSensorThresholdTable entry describes the
thresholds for a sensor: the threshold severity,
the threshold value, the relation, and the
evaluation of the threshold.
Only entities of type sensor(8) are listed in this table.
Only pre-configured thresholds are listed in this table.
Users can create sensor-value monitoring instruments
in different ways, such as RMON alarms, Expression-MIB, etc.
Entries are created by the agent at system startup and
FRU insertion. Entries are deleted by the agent at
FRU removal."
INDEX {
entPhysicalIndex,
entSensorThresholdIndex
}
::= { entSensorThresholdTable 1 }
EntSensorThresholdEntry ::= SEQUENCE {
entSensorThresholdIndex Integer32,
entSensorThresholdSeverity SensorThresholdSeverity,
entSensorThresholdRelation SensorThresholdRelation,
entSensorThresholdValue SensorValue,
entSensorThresholdEvaluation TruthValue,
entSensorThresholdNotificationEnable TruthValue
}
entSensorThresholdIndex OBJECT-TYPE
SYNTAX Integer32 (1..99999999)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry
in the entSensorThresholdTable. This index
permits the same sensor to have several
different thresholds."
::= { entSensorThresholdEntry 1 }
entSensorThresholdSeverity OBJECT-TYPE
SYNTAX SensorThresholdSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the severity of this threshold."
::= { entSensorThresholdEntry 2 }
entSensorThresholdRelation OBJECT-TYPE
SYNTAX SensorThresholdRelation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the relation between sensor value
(entSensorValue) and threshold value (entSensorThresholdValue),
required to trigger the alarm. when evaluating the relation,
entSensorValue is on the left of entSensorThresholdRelation,
entSensorThresholdValue is on the right.
in pseudo-code, the evaluation-alarm mechanism is:
...
if (entSensorStatus == ok) then
if (evaluate(entSensorValue, entSensorThresholdRelation,
entSensorThresholdValue))
then
if (entSensorThresholdNotificationEnable == true))
then
raise_alarm(sensor's entPhysicalIndex);
endif
endif
endif
..."
::= { entSensorThresholdEntry 3 }
entSensorThresholdValue OBJECT-TYPE
SYNTAX SensorValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the value of the threshold.
To correctly display or interpret this variable's value,
you must also know entSensorType, entSensorScale, and
entSensorPrecision.
However, you can directly compare entSensorValue
with the threshold values given in entSensorThresholdTable
without any semantic knowledge."
::= { entSensorThresholdEntry 4 }
entSensorThresholdEvaluation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the result of the most
recent evaluation of the threshold. If the threshold
condition is true, entSensorThresholdEvaluation
is true(1). If the threshold condition is false,
entSensorThresholdEvaluation is false(2).
Thresholds are evaluated at the rate indicated by
entSensorValueUpdateRate."
::= { entSensorThresholdEntry 5 }
entSensorThresholdNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls generation of
entSensorThresholdNotification for this threshold.
When this variable is 'true', generation of
entSensorThresholdNotification is enabled for this
threshold. When this variable is 'false',
generation of entSensorThresholdNotification is
disabled for this threshold."
::= { entSensorThresholdEntry 6 }
-- Entity Sensor Global Objects
entSensorThreshNotifGlobalEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable enables the generation of
entSensorThresholdNotification globally
on the device. If this object value is
'false', then no entSensorThresholdNotification
will be generated on this device. If this object
value is 'true', then whether a
entSensorThresholdNotification for a threshold will
be generated or not depends on the instance value of
entSensorThresholdNotificationEnable for that
threshold."
::= { entSensorGlobalObjects 1 }
-- notifications
entitySensorMIBNotifications OBJECT IDENTIFIER
::= { entitySensorMIBNotificationPrefix 0 }
entSensorThresholdNotification NOTIFICATION-TYPE
OBJECTS {
entSensorThresholdValue,
entSensorValue,
entSensorThresholdSeverity
}
STATUS current
DESCRIPTION
"The notification is generated when
the sensor value entSensorValue crosses
the threshold value entSensorThresholdValue and
the value of entSensorThreshNotifGlobalEnable is true.
entSensorThresholdSeverity indicates the severity
of this threshold.
The agent implementation guarantees prompt, timely
evaluation of threshold and generation of this
notification."
::= { entitySensorMIBNotifications 1 }
entSensorThresholdRecoveryNotification NOTIFICATION-TYPE
OBJECTS {
entSensorValue,
entSensorThresholdSeverity,
entSensorThresholdValue
}
STATUS current
DESCRIPTION
"This notification is generated
as a recovery notification when
the sensor value entSensorValue goes below
the threshold value entSensorThresholdValue
once it has generated entSensorThresholdNotification.
The value of entSensorThreshNotifGlobalEnable needs
to be true.
entSensorThresholdSeverity indicates the severity
of this threshold.
The agent implementation guarantees prompt, timely
evaluation of threshold and generation of this
notification."
::= { entitySensorMIBNotifications 2 }
-- conformance information
entitySensorMIBCompliances OBJECT IDENTIFIER
::= { entitySensorMIBConformance 1 }
entitySensorMIBGroups OBJECT IDENTIFIER
::= { entitySensorMIBConformance 2 }
-- compliance statements
entitySensorMIBComplianceV01 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation that lists
sensors in its entPhysicalTable must implement
this group."
MODULE -- this module
MANDATORY-GROUPS {
entitySensorValueGroup,
entitySensorThresholdGroup,
entitySensorThresholdNotificationGroup
}
::= { entitySensorMIBCompliances 1 }
entitySensorMIBComplianceV02 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation that lists
sensors in its entPhysicalTable must implement
this group."
MODULE -- this module
MANDATORY-GROUPS { entitySensorThresholdGroup }
GROUP entitySensorValueGroup
DESCRIPTION
"This group is mandatory for the systems which don't
support IETF version of ENTITY-SENSOR-MIB."
GROUP entitySensorThresholdNotificationGroup
DESCRIPTION
"This group is mandatory for the systems which support
entitySensorValueGroup group."
OBJECT entSensorThresholdSeverity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdRelation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { entitySensorMIBCompliances 2 }
entitySensorMIBComplianceV03 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation that lists
sensors in its entPhysicalTable must implement
this group."
MODULE -- this module
MANDATORY-GROUPS { entitySensorThresholdGroup }
GROUP entitySensorValueGroup
DESCRIPTION
"This group is mandatory for the systems which don't
support IETF version of ENTITY-SENSOR-MIB."
GROUP entitySensorThresholdNotificationGroup
DESCRIPTION
"This group is mandatory for the systems which support
entitySensorValueGroup group."
GROUP entitySensorValueGroupSup1
DESCRIPTION
"This group is mandatory for the systems which support
the correlation between sensor and its measured
physical entity."
OBJECT entSensorThresholdSeverity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdRelation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { entitySensorMIBCompliances 3 }
entitySensorMIBComplianceV04 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"An Entity-MIB implementation that lists
sensors in its entPhysicalTable must implement
this group."
MODULE -- this module
MANDATORY-GROUPS { entitySensorThresholdGroup }
GROUP entitySensorValueGroup
DESCRIPTION
"This group is mandatory for the systems which don't
support IETF version of ENTITY-SENSOR-MIB."
GROUP entitySensorThresholdNotificationGroup
DESCRIPTION
"This group is mandatory for the systems which support
entitySensorValueGroup group."
GROUP entitySensorValueGroupSup1
DESCRIPTION
"This group is mandatory for the systems which support
the correlation between sensor and its measured
physical entity."
GROUP entitySensorNotifCtrlGlobalGroup
DESCRIPTION
"This group is mandatory for the platforms which support
global notification control on
entSensorThresholdNotification."
OBJECT entSensorThresholdSeverity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdRelation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { entitySensorMIBCompliances 4 }
entitySensorMIBComplianceV05 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An Entity-MIB implementation that lists
sensors in its entPhysicalTable must implement
this group."
MODULE -- this module
MANDATORY-GROUPS { entitySensorThresholdGroup }
GROUP entitySensorValueGroup
DESCRIPTION
"This group is mandatory for the systems
which don't support IETF version of
ENTITY-SENSOR-MIB."
GROUP entitySensorValueGroupSup1
DESCRIPTION
"This group is mandatory for the systems
which don't support IETF version of
ENTITY-SENSOR-MIB."
GROUP entitySensorNotifCtrlGlobalGroup
DESCRIPTION
"This group is mandatory for the systems
which don't support IETF version of
ENTITY-SENSOR-MIB."
GROUP entitySensorNotificationGroup
DESCRIPTION
"This group is mandatory for the systems
which don't support IETF version of
ENTITY-SENSOR-MIB."
OBJECT entSensorThresholdSeverity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdRelation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT entSensorThresholdValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { entitySensorMIBCompliances 5 }
-- units of conformance
entitySensorValueGroup OBJECT-GROUP
OBJECTS {
entSensorType,
entSensorScale,
entSensorPrecision,
entSensorValue,
entSensorStatus,
entSensorValueTimeStamp,
entSensorValueUpdateRate
}
STATUS current
DESCRIPTION
"The collection of objects which are used
to describe and monitor values of Entity-MIB
entPhysicalTable entries of sensors."
::= { entitySensorMIBGroups 1 }
entitySensorThresholdGroup OBJECT-GROUP
OBJECTS {
entSensorThresholdSeverity,
entSensorThresholdRelation,
entSensorThresholdValue,
entSensorThresholdEvaluation,
entSensorThresholdNotificationEnable
}
STATUS current
DESCRIPTION
"The collection of objects which are used
to describe and monitor thresholds for
sensors."
::= { entitySensorMIBGroups 2 }
entitySensorThresholdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { entSensorThresholdNotification }
STATUS deprecated
DESCRIPTION
"The collection of notifications used for
monitoring sensor threshold activity.
entitySensorThresholdNotificationGroup
object is superseded by
entitySensorNotificationGroup."
::= { entitySensorMIBGroups 3 }
entitySensorValueGroupSup1 OBJECT-GROUP
OBJECTS { entSensorMeasuredEntity }
STATUS current
DESCRIPTION
"The collection of objects which are used to describe and track
the measured entities of ENTITY-MIB entPhysicalTable."
::= { entitySensorMIBGroups 4 }
entitySensorNotifCtrlGlobalGroup OBJECT-GROUP
OBJECTS { entSensorThreshNotifGlobalEnable }
STATUS current
DESCRIPTION
"The collection of objects which provide the global
notification control on entSensorThresholdNotification."
::= { entitySensorMIBGroups 5 }
entitySensorNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
entSensorThresholdNotification,
entSensorThresholdRecoveryNotification
}
STATUS current
DESCRIPTION
"The collection of notifications used for
monitoring sensor threshold activity."
::= { entitySensorMIBGroups 6 }
END