Initial commit
This commit is contained in:
David Leutgeb
934
MIBS/eaton/EATON-ATS2-MIB
Normal file
934
MIBS/eaton/EATON-ATS2-MIB
Normal file
@@ -0,0 +1,934 @@
|
||||
EATON-ATS2-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
|
||||
Counter32
|
||||
FROM SNMPv2-SMI
|
||||
TEXTUAL-CONVENTION, DisplayString
|
||||
FROM SNMPv2-TC
|
||||
sts
|
||||
FROM EATON-OIDS;
|
||||
|
||||
ats2 MODULE-IDENTITY
|
||||
LAST-UPDATED "201407311200Z"
|
||||
ORGANIZATION
|
||||
"Eaton Corporation"
|
||||
CONTACT-INFO
|
||||
"www.eaton.com"
|
||||
DESCRIPTION
|
||||
"The MIB module for Eaton ATS (Automatic Transfer Switch)."
|
||||
|
||||
REVISION "201407311200Z"
|
||||
DESCRIPTION
|
||||
"Initial release."
|
||||
::= { sts 2 }
|
||||
|
||||
|
||||
-- EatonSTS-MIB { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) eaton(534) sts(10) ats2(2) }
|
||||
|
||||
ats2Ident OBJECT IDENTIFIER ::= { ats2 1 }
|
||||
ats2Measure OBJECT IDENTIFIER ::= { ats2 2 }
|
||||
ats2Status OBJECT IDENTIFIER ::= { ats2 3 }
|
||||
ats2Config OBJECT IDENTIFIER ::= { ats2 4 }
|
||||
ats2Environment OBJECT IDENTIFIER ::= {ats2 5}
|
||||
ats2Traps OBJECT IDENTIFIER ::= { ats2 10 }
|
||||
|
||||
-- Textual Conventions
|
||||
UnixTimeStamp ::= TEXTUAL-CONVENTION
|
||||
DISPLAY-HINT "dddddddddd"
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Unix time stamp. Measured in seconds since January 1, 1970."
|
||||
SYNTAX Counter32
|
||||
|
||||
--
|
||||
-- Identification group
|
||||
ats2IdentManufacturer OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..16))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The manufacturer name."
|
||||
::= { ats2Ident 1 }
|
||||
|
||||
ats2IdentModel OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Device model name."
|
||||
::= { ats2Ident 2 }
|
||||
|
||||
ats2IdentFWVersion OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..16))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Device F/W version."
|
||||
::= { ats2Ident 3 }
|
||||
|
||||
ats2IdentRelease OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..16))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The released date."
|
||||
::= { ats2Ident 4 }
|
||||
|
||||
ats2IdentSerialNumber OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Device serial number"
|
||||
::= { ats2Ident 5 }
|
||||
|
||||
ats2IdentPartNumber OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Device part number"
|
||||
::= { ats2Ident 6 }
|
||||
|
||||
ats2IdentAgentVersion OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Communication Card F/W version"
|
||||
::= { ats2Ident 7 }
|
||||
|
||||
--
|
||||
-- Mesurement group
|
||||
ats2Input OBJECT IDENTIFIER ::= { ats2Measure 1 }
|
||||
|
||||
ats2InputDephasing OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "degrees"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The dephasing in between Source 1 and Source 2."
|
||||
::= { ats2Input 1 }
|
||||
|
||||
ats2InputTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ATSInputEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table of input information."
|
||||
::= { ats2Measure 2 }
|
||||
|
||||
ats2Output OBJECT IDENTIFIER ::= { ats2Measure 3 }
|
||||
|
||||
ats2OperationMode OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
initialization(1),
|
||||
diagnosis(2),
|
||||
off(3),
|
||||
source1(4),
|
||||
source2(5),
|
||||
safe(6),
|
||||
fault(7)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The operation mode."
|
||||
::= { ats2Measure 4 }
|
||||
|
||||
--
|
||||
-- Mesurement / Input group
|
||||
ats2InputEntry OBJECT-TYPE
|
||||
SYNTAX ATSInputEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The input information of each source input:
|
||||
<node>.1 source1
|
||||
<node>.2 source2"
|
||||
INDEX { ats2InputIndex }
|
||||
::= { ats2InputTable 1 }
|
||||
|
||||
ATSInputEntry ::= SEQUENCE {
|
||||
ats2InputIndex INTEGER,
|
||||
ats2InputVoltage INTEGER,
|
||||
ats2InputFrequency INTEGER
|
||||
}
|
||||
|
||||
ats2InputIndex OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
source1(1),
|
||||
source2(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Index to input."
|
||||
::= { ats2InputEntry 1 }
|
||||
|
||||
ats2InputVoltage OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "0.1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The input voltage in front of relay. Units are 0.1 V."
|
||||
::= { ats2InputEntry 2 }
|
||||
|
||||
ats2InputFrequency OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "0.1 Hz"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The input frequency. Units are 0.1 Hz."
|
||||
::= { ats2InputEntry 3 }
|
||||
|
||||
--
|
||||
-- Mesurement / Output group
|
||||
ats2OutputVoltage OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "0.1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The output voltage. Units are 0.1 V."
|
||||
::= { ats2Output 1 }
|
||||
|
||||
ats2OutputCurrent OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "0.1 A"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The output current. Units are 0.1 A."
|
||||
::= { ats2Output 2 }
|
||||
|
||||
|
||||
--
|
||||
-- Status group
|
||||
ats2InputStatus OBJECT IDENTIFIER ::= { ats2Status 1 }
|
||||
|
||||
ats2InputStatusDephasing OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
normal (1),
|
||||
outOfRange (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The dephasing status in between Source 1 and Source 2."
|
||||
::= { ats2InputStatus 1 }
|
||||
|
||||
ats2InputStatusTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ATSInputStatusEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table of input status."
|
||||
::= { ats2Status 2 }
|
||||
|
||||
ats2OutputStatus OBJECT IDENTIFIER ::= { ats2Status 3 }
|
||||
|
||||
--
|
||||
-- Status / Input Flow group
|
||||
ats2InputStatusEntry OBJECT-TYPE
|
||||
SYNTAX ATSInputStatusEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The input flow status:
|
||||
<node>.1 source1
|
||||
<node>.2 source2"
|
||||
INDEX { ats2InputStatusIndex }
|
||||
::= { ats2InputStatusTable 1 }
|
||||
|
||||
ATSInputStatusEntry ::= SEQUENCE {
|
||||
ats2InputStatusIndex INTEGER,
|
||||
ats2InputStatusFrequency INTEGER,
|
||||
ats2InputStatusGood INTEGER,
|
||||
ats2InputStatusInternalFailure INTEGER,
|
||||
ats2InputStatusVoltage INTEGER,
|
||||
ats2InputStatusUsed INTEGER
|
||||
}
|
||||
|
||||
ats2InputStatusIndex OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
source1(1),
|
||||
source2(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Index of input entry."
|
||||
::= { ats2InputStatusEntry 1 }
|
||||
|
||||
ats2InputStatusFrequency OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
good (1),
|
||||
outOfRange (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of input frequency."
|
||||
::= { ats2InputStatusEntry 2 }
|
||||
|
||||
ats2InputStatusGood OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
voltageOrFreqOutofRange(1),
|
||||
voltageAndFreqNormalRange(2),
|
||||
voltageDeratedRangeAndFreqNormalRange(3),
|
||||
voltageAndFreqNormalRangeWaveformNok(4)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The summarized status of input AC flow."
|
||||
::= { ats2InputStatusEntry 3 }
|
||||
|
||||
ats2InputStatusInternalFailure OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
good (1),
|
||||
internalFailure (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The internal fault status of input."
|
||||
::= { ats2InputStatusEntry 4 }
|
||||
|
||||
ats2InputStatusVoltage OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
normalRange(1),
|
||||
deratedRange(2),
|
||||
outofRange(3),
|
||||
missing(4)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of input voltage."
|
||||
::= { ats2InputStatusEntry 5 }
|
||||
|
||||
ats2InputStatusUsed OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
notPoweringLoad(1),
|
||||
poweringLoad(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of input relay."
|
||||
::= { ats2InputStatusEntry 6 }
|
||||
|
||||
--
|
||||
-- Status / Failure group
|
||||
ats2StatusInternalFailure OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
good (1),
|
||||
internalFailure (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Output fault."
|
||||
::= { ats2OutputStatus 1 }
|
||||
|
||||
ats2StatusOutput OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
outputNotPowered(1),
|
||||
outputPowered(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Output powered status."
|
||||
::= { ats2OutputStatus 2 }
|
||||
|
||||
ats2StatusOverload OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
noOverload(1),
|
||||
warningOverload(2),
|
||||
criticalOverload(3)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The output overload status."
|
||||
::= { ats2OutputStatus 3 }
|
||||
|
||||
ats2StatusOverTemperature OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
noOverTemperature(1),
|
||||
overTemperature(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The over temperature status."
|
||||
::= { ats2OutputStatus 4 }
|
||||
|
||||
ats2StatusShortCircuit OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
noShortCircuit(1),
|
||||
shortCircuit(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Short circuit status."
|
||||
::= { ats2OutputStatus 5 }
|
||||
|
||||
ats2StatusCommunicationLost OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
good (1),
|
||||
communicationLost (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Communication failure status."
|
||||
::= { ats2OutputStatus 6 }
|
||||
|
||||
ats2StatusConfigurationFailure OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
good (1),
|
||||
configurationFailure (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Configuration failure status."
|
||||
::= { ats2OutputStatus 7 }
|
||||
|
||||
--
|
||||
-- Configuration group
|
||||
ats2ConfigTime OBJECT IDENTIFIER ::= { ats2Config 1 }
|
||||
|
||||
ats2ConfigInputVoltageRating OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The input voltage rating. Unit is 1 V."
|
||||
::= { ats2Config 2 }
|
||||
|
||||
ats2ConfigInputFrequencyRating OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "Hz"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The input frequency rating. Unit is 1 Hz."
|
||||
::= { ats2Config 3 }
|
||||
|
||||
ats2ConfigOutputVoltage OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "1 V"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The output voltage config. Unit is 1 V."
|
||||
::= { ats2Config 4 }
|
||||
|
||||
ats2ConfigPreferred OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
source1(1),
|
||||
source2(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The preferred source."
|
||||
::= { ats2Config 5 }
|
||||
|
||||
ats2ConfigSensitivity OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
normal(1),
|
||||
highSensitivity (2),
|
||||
lowSensitivity (3)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The AC Blackout Sensitivity."
|
||||
::= { ats2Config 6 }
|
||||
|
||||
ats2ConfigTransferMode OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
standard(1),
|
||||
gap(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"behavior configuration when transfering from one source to other source not synchronized."
|
||||
::= { ats2Config 7 }
|
||||
|
||||
ats2ConfigTransferTest OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
doneAndPassed (1),
|
||||
doneAndWarning (2),
|
||||
doneAndError (3),
|
||||
aborted (4),
|
||||
inProgress (5),
|
||||
noTestInitiated (6)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of transfer test."
|
||||
::= { ats2Config 8 }
|
||||
|
||||
ats2ConfigBrownoutLow OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Setting of input brownout low voltage. Unit is 1 V."
|
||||
::= { ats2Config 9 }
|
||||
|
||||
ats2ConfigBrownoutLowDerated OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Setting of input brownout low derated voltage. Unit is 1 V."
|
||||
::= { ats2Config 10 }
|
||||
|
||||
ats2ConfigBrownoutHigh OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Setting of input brownout high voltage. Unit is 1 V."
|
||||
::= { ats2Config 11 }
|
||||
|
||||
ats2ConfigHysteresisVoltage OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
UNITS "1 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Hysteresis between loss point and comeback point. Unit is 1 V."
|
||||
::= { ats2Config 12 }
|
||||
|
||||
--
|
||||
-- Configuration / Time group
|
||||
ats2ConfigTimeRTC OBJECT-TYPE
|
||||
SYNTAX UnixTimeStamp
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Clock value. This could be from either a real-time clock (in which case
|
||||
it is likely writeable) or from a time server via NTP (probably read-only).
|
||||
(since 1/1/1970 at 1:00:00)."
|
||||
::= { ats2ConfigTime 1 }
|
||||
|
||||
ats2ConfigTimeTextDate OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..10))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The present date in MM/DD/YYYY text format."
|
||||
::= { ats2ConfigTime 2 }
|
||||
|
||||
ats2ConfigTimeTextTime OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..8))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The present time in hh:mm:ss text format."
|
||||
::= { ats2ConfigTime 3 }
|
||||
|
||||
|
||||
--
|
||||
-- EMP group
|
||||
--
|
||||
-- The objects defined in this group are provided by the EMP.
|
||||
-- They are Temperature and Humidity readings and alarming limits,
|
||||
-- and the (two) contacts readings and setup information.
|
||||
-- These objects are related to the separate EMP probe that can be connected to
|
||||
-- the communication card.
|
||||
--
|
||||
-- Notices/Traps: traps related to the probe are
|
||||
-- ats2tdRemoteTempBad
|
||||
-- ats2tdRemoteHumidityBad
|
||||
-- ats2tdContactActiveNotice
|
||||
-- ats2tdContactInactiveNotice
|
||||
|
||||
|
||||
ats2EnvRemoteTemp OBJECT-TYPE
|
||||
SYNTAX INTEGER (-100..200)
|
||||
UNITS "degrees Centigrade"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The reading of an EMP's temperature sensor."
|
||||
::= { ats2Environment 1 }
|
||||
|
||||
ats2EnvRemoteHumidity OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..100)
|
||||
UNITS "percent"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The reading of an EMP's humidity sensor."
|
||||
::= { ats2Environment 2 }
|
||||
|
||||
--
|
||||
-- The Environmental Contact Sensing Table
|
||||
-- Contains the table for monitoring all contacts (digital
|
||||
-- inputs, normally 2 in an EMP).
|
||||
--
|
||||
|
||||
ats2EnvNumContacts OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..1024)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The number of Contacts in the ats2ContactSenseTable.
|
||||
This object indicates the number of rows in the
|
||||
ats2ContactSenseTable."
|
||||
::= { ats2Environment 3 }
|
||||
|
||||
ats2ContactSenseTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF Ats2ContactsTableEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A list of Contact Sensing table entries.
|
||||
The number of entries is given by the value of
|
||||
ats2EnvNumContacts."
|
||||
::= { ats2Environment 4 }
|
||||
|
||||
ats2ContactsTableEntry OBJECT-TYPE
|
||||
SYNTAX Ats2ContactsTableEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry containing information applicable
|
||||
to a particular Contact input."
|
||||
INDEX { ats2ContactIndex }
|
||||
::= { ats2ContactSenseTable 1 }
|
||||
|
||||
Ats2ContactsTableEntry ::= SEQUENCE {
|
||||
ats2ContactIndex INTEGER,
|
||||
ats2ContactType INTEGER,
|
||||
ats2ContactState INTEGER,
|
||||
ats2ContactDescr DisplayString
|
||||
}
|
||||
|
||||
ats2ContactIndex OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..1024)
|
||||
MAX-ACCESS read-only -- actually not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Contact identifier; identical to the Contact Number.
|
||||
This object is not-accessible to MIB browsers, but had to be changed to
|
||||
read-only to satisfy SMIv2 syntax checkers if it is included in traps."
|
||||
::= { ats2ContactsTableEntry 1 }
|
||||
|
||||
ats2ContactType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
normallyOpen(1), -- or Input Normally High
|
||||
normallyClosed(2), -- or Input Normally Low
|
||||
anyChange(3), -- No normal Open/Closed state
|
||||
notUsed(4) -- Contact not in service or not alarming
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The normal state for this contact. The 'other' (not 'Normally')
|
||||
state is the Active state for generating the ats2tdContactActiveNotice
|
||||
trap. If anyChange(3) is selected, then this trap is sent
|
||||
any time the contact changes to either Open or Closed.
|
||||
No traps are sent if the Contact is set to notUsed(4).
|
||||
In many cases, the configuration for Contacts may be done by other
|
||||
means, so this object may be read-only."
|
||||
::= { ats2ContactsTableEntry 2 }
|
||||
|
||||
ats2ContactState OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
open(1),
|
||||
closed(2),
|
||||
openWithNotice(3),
|
||||
closedWithNotice(4)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current state of the Contact input;
|
||||
the value is based on the open/closed input state
|
||||
and the setting for ats2ContactType.
|
||||
When entering the openWithNotice(3) and closedWithNotice(4)
|
||||
states, no entries added to the ats2AlarmTable, but
|
||||
the ats2tdContactActiveNotice trap is sent."
|
||||
::= { ats2ContactsTableEntry 3 }
|
||||
|
||||
ats2ContactDescr OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..63))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A label identifying the Contact. This object should be
|
||||
set by the administrator."
|
||||
::= { ats2ContactsTableEntry 4 }
|
||||
|
||||
ats2EnvRemoteTempLowerLimit OBJECT-TYPE
|
||||
SYNTAX INTEGER (-100..200)
|
||||
UNITS "degrees Centigrade"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Lower Limit of the EMP temperature; if ats2EnvRemoteTemp
|
||||
falls below this value, the ats2RemoteTempBad alarm will occur."
|
||||
::= { ats2Environment 5 }
|
||||
|
||||
ats2EnvRemoteTempUpperLimit OBJECT-TYPE
|
||||
SYNTAX INTEGER (-100..200)
|
||||
UNITS "degrees Centigrade"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Upper Limit of the EMP temperature; if ats2EnvRemoteTemp
|
||||
rises above this value, the ats2RemoteTempBad alarm will occur.
|
||||
This value should be greater than ats2EnvRemoteTempLowerLimit."
|
||||
::= { ats2Environment 6 }
|
||||
|
||||
ats2EnvRemoteHumidityLowerLimit OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..100)
|
||||
UNITS "percent"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Lower Limit of the EMP humidity reading; if ats2EnvRemoteHumidity
|
||||
falls below this value, the ats2RemoteHumidityBad alarm will occur."
|
||||
::= { ats2Environment 7 }
|
||||
|
||||
ats2EnvRemoteHumidityUpperLimit OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..100)
|
||||
UNITS "percent"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Upper Limit of the EMP humidity reading; if ats2EnvRemoteHumidity
|
||||
rises above this value, the ats2RemoteHumidityBad alarm will occur.
|
||||
This value should be greater than ats2EnvRemoteHumidityLowerLimit."
|
||||
::= { ats2Environment 8 }
|
||||
|
||||
|
||||
--
|
||||
-- Traps / Notifications for the EMP in the PowerMIB style
|
||||
-- The special EMP traps are not normally provided by Power Xpert Gateways (which use
|
||||
-- the PXG-style traps instead) but could be provided by PowerMIB implementations
|
||||
-- These are found in the PowerMIB:
|
||||
-- ats2tdContactActiveNotice
|
||||
-- ats2tdContactInactiveNotice
|
||||
-- ats2tdRemoteTempBad
|
||||
-- ats2tdRemoteHumidityBad
|
||||
|
||||
|
||||
|
||||
|
||||
--
|
||||
-- Traps group
|
||||
ats2TrapCommunicationLost NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Communication with the ATS failed."
|
||||
::= { ats2Traps 1 }
|
||||
|
||||
ats2TrapCommunicationRecovered NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Communication with the ATS recovered."
|
||||
::= { ats2Traps 2 }
|
||||
|
||||
ats2TrapOutputPowered NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ATS powers the load."
|
||||
::= { ats2Traps 3 }
|
||||
|
||||
ats2TrapOutputNotPowered NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ATS does not powers the load."
|
||||
::= { ats2Traps 4 }
|
||||
|
||||
ats2TrapOverload NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ATS has sensed a critical overload."
|
||||
::= { ats2Traps 5 }
|
||||
|
||||
ats2TrapNoOverLoad NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The critical overload disappeared."
|
||||
::= { ats2Traps 6 }
|
||||
|
||||
ats2TrapInternalFailure NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ATS has an internal failure (sum of all HW internal failure)."
|
||||
::= { ats2Traps 7 }
|
||||
|
||||
ats2TrapNoInternalFailure NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ATS internal failure disappeared."
|
||||
::= { ats2Traps 8 }
|
||||
|
||||
ats2TrapSource1Normal NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 1 returns to normal."
|
||||
::= { ats2Traps 9 }
|
||||
|
||||
ats2TrapSource1OutOfRange NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 1 out of range."
|
||||
::= { ats2Traps 10 }
|
||||
|
||||
ats2TrapSource2Normal NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 2 returns to normal."
|
||||
::= { ats2Traps 11 }
|
||||
|
||||
ats2TrapSource2OutOfRange NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 2 out of range."
|
||||
::= { ats2Traps 12 }
|
||||
|
||||
ats2TrapSourceDesynchronized NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 1 and Source 2 phase are desynchronized."
|
||||
::= { ats2Traps 13 }
|
||||
|
||||
ats2TrapSourceSynchronized NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 1 and Source 2 phase are synchronized."
|
||||
::= { ats2Traps 14 }
|
||||
|
||||
ats2TrapOutputPoweredBySource1 NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 1 powers the output."
|
||||
::= { ats2Traps 15 }
|
||||
|
||||
ats2TrapOutputPoweredBySource2 NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Source 2 powers the output."
|
||||
::= { ats2Traps 16 }
|
||||
|
||||
-- Added to provide additional information with the RemoteTemp and RemoteHumidity
|
||||
ats2TrapRemoteTempLow NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The remote temperature, ats2EnvRemoteTemp, has fallen below
|
||||
the set lower limit, ats2EnvRemoteTempLowerLimit."
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 20 }
|
||||
|
||||
ats2TrapRemoteTempHigh NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The remote temperature, ats2EnvRemoteTemp, has risen above
|
||||
the set upper limit, xupsEnvRemoteTempUpperLimit."
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 21 }
|
||||
|
||||
ats2TrapRemoteTempNormal NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The remote temperature, ats2EnvRemoteTemp, is inside the interval
|
||||
defined by the lower limit and the upper limit."
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 22 }
|
||||
|
||||
ats2TrapRemoteHumidityLow NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The remote humidity, ats2EnvRemoteHumidity, has fallen below
|
||||
the set lower limit, ats2EnvRemoteHumidityLowerLimit."
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 23 }
|
||||
|
||||
ats2TrapRemoteHumidityHigh NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The remote humidity, ats2EnvRemoteHumidity, has risen above
|
||||
the set upper limit, ats2EnvRemoteHumidityUpperLimit."
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 24 }
|
||||
|
||||
ats2TrapRemoteHumidityNormal NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The remote humidity, ats2EnvRemoteHumidity, is inside the interval
|
||||
defined by the lower limit and the upper limit."
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 25 }
|
||||
|
||||
ats2Contact1ActiveNotice NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Contact 1 is in its Active state.
|
||||
The following are the situations that generate this trap:
|
||||
For ats2ContactType: and ats2ContactState:
|
||||
normallyOpen(1) and closedWithNotice(4)
|
||||
normallyClosed(2) and openWithNotice(3)
|
||||
anyChange(3) and openWithNotice(3) or closedWithNotice(4)"
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 26 }
|
||||
|
||||
ats2Contact1InactiveNotice NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Contact 1 has changed to its Inactive state."
|
||||
--#SEVERITY INFORMATIONAL
|
||||
::= { ats2Traps 27 }
|
||||
|
||||
ats2Contact2ActiveNotice NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Contact 2 is in its Active state.
|
||||
The following are the situations that generate this trap:
|
||||
For ats2ContactType: and ats2ContactState:
|
||||
normallyOpen(1) and closedWithNotice(4)
|
||||
normallyClosed(2) and openWithNotice(3)
|
||||
anyChange(3) and openWithNotice(3) or closedWithNotice(4)"
|
||||
--#SEVERITY MAJOR
|
||||
::= { ats2Traps 28 }
|
||||
|
||||
ats2Contact2InactiveNotice NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Contact 2 has changed to its Inactive state."
|
||||
--#SEVERITY INFORMATIONAL
|
||||
::= { ats2Traps 29 }
|
||||
|
||||
ats2TestTrap NOTIFICATION-TYPE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Sent whenever the trap test feature is used by the communication card."
|
||||
--#SEVERITY INFORMATIONAL
|
||||
::= { ats2Traps 40 }
|
||||
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user