Initial commit
This commit is contained in:
David Leutgeb
524
MIBS/extreme/BROCADE-OPTICAL-MONITORING-MIB
Normal file
524
MIBS/extreme/BROCADE-OPTICAL-MONITORING-MIB
Normal file
@ -0,0 +1,524 @@
|
||||
-- MIB File: BROCADE-OPTICAL-MONITORING-MIB.mib
|
||||
-- *********************************************************************
|
||||
-- BROCADE-OPTICAL-MONITORING-MIB.mib: Extreme Optical Monitoring MIB
|
||||
--
|
||||
-- Copyright (c) 2018 Extreme Networks, Inc.
|
||||
-- All rights reserved.
|
||||
--
|
||||
-- *********************************************************************
|
||||
BROCADE-OPTICAL-MONITORING-MIB DEFINITIONS ::= BEGIN
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
|
||||
FROM SNMPv2-SMI
|
||||
MODULE-COMPLIANCE, OBJECT-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
DisplayString, TEXTUAL-CONVENTION
|
||||
FROM SNMPv2-TC
|
||||
SnmpAdminString
|
||||
FROM SNMP-FRAMEWORK-MIB
|
||||
ifIndex
|
||||
FROM IF-MIB
|
||||
bcsiModules
|
||||
FROM Brocade-REG-MIB
|
||||
;
|
||||
|
||||
brocadeOpticalMonitoringMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "201909230000Z" -- Sep 23, 2019
|
||||
ORGANIZATION "Extreme Networks, Inc."
|
||||
CONTACT-INFO
|
||||
"Postal: Extreme Networks, Inc.
|
||||
6480 Via Del Oro
|
||||
San Jose, CA 95119 USA
|
||||
Phone: +1 408 579-2800
|
||||
E-mail: support@extremenetworks.com
|
||||
WWW: http://www.extremenetworks.com"
|
||||
DESCRIPTION
|
||||
"This MIB module supports monitoring of port optics
|
||||
for parameters like, temperature, Tx Power, Rx Power,
|
||||
Tx Bias Current, etc.,."
|
||||
|
||||
REVISION "201909230000Z" -- Sep 23, 2019
|
||||
DESCRIPTION
|
||||
"Added bcsiIfMediaInfoTable"
|
||||
REVISION "201805291200Z" -- May 29, 2018
|
||||
DESCRIPTION
|
||||
"Updated ORGANIZATION and CONTACT-INFO with Extreme Networks"
|
||||
REVISION "201611230000Z"
|
||||
DESCRIPTION
|
||||
"Added support for bcsiOptMonInfoTable."
|
||||
|
||||
REVISION "201609280000Z"
|
||||
DESCRIPTION
|
||||
"Initial version of this MIB module."
|
||||
::= { bcsiModules 8 }
|
||||
|
||||
bcsiOptMonNotifications OBJECT IDENTIFIER ::= { brocadeOpticalMonitoringMIB 0 }
|
||||
bcsiOptMonObjects OBJECT IDENTIFIER ::= { brocadeOpticalMonitoringMIB 1 }
|
||||
bcsiOptMonConformance OBJECT IDENTIFIER ::= { brocadeOpticalMonitoringMIB 2 }
|
||||
|
||||
-- Optical Parameters Table per lane for a 40G SR4 and LR4,
|
||||
-- 100G LR4 and LR10 optics.
|
||||
|
||||
bcsiOptMonLaneTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF BcsiOptMonLaneEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table lists the instrumented parameters of all
|
||||
lanes within a 40G Optic of type SR4 and LR4,
|
||||
100G optic of type LR4 and LR10. LR4 and SR4 have 4 lanes
|
||||
per optic, LR10 has 10 lanes per optic."
|
||||
REFERENCE
|
||||
"ITU recommendations G.783, G.784, G.953"
|
||||
::= { bcsiOptMonObjects 1 }
|
||||
|
||||
bcsiOptMonLaneEntry OBJECT-TYPE
|
||||
SYNTAX BcsiOptMonLaneEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Only the ifIndices of optical interfaces
|
||||
whose parameters need to be monitored will
|
||||
be used to index this table."
|
||||
INDEX { ifIndex, bcsiOptMonLaneNum }
|
||||
::= { bcsiOptMonLaneTable 1 }
|
||||
|
||||
BcsiOptMonLaneEntry ::=
|
||||
SEQUENCE {
|
||||
bcsiOptMonLaneNum
|
||||
Unsigned32,
|
||||
bcsiOptMonLaneTemperature
|
||||
SnmpAdminString,
|
||||
bcsiOptMonLaneTxPowerStatus
|
||||
INTEGER,
|
||||
bcsiOptMonLaneTxPower
|
||||
SnmpAdminString,
|
||||
bcsiOptMonLaneTxPowerVal
|
||||
Unsigned32,
|
||||
bcsiOptMonLaneRxPowerStatus
|
||||
INTEGER,
|
||||
bcsiOptMonLaneRxPower
|
||||
SnmpAdminString,
|
||||
bcsiOptMonLaneRxPowerVal
|
||||
Unsigned32,
|
||||
bcsiOptMonLaneTxBiasCurrent
|
||||
SnmpAdminString
|
||||
}
|
||||
|
||||
bcsiOptMonLaneNum OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The lane number of this 40G or 100G optic.
|
||||
LR4 and SR4 have 4 lanes per optic.
|
||||
LR10 has 10 lanes per optic."
|
||||
::= { bcsiOptMonLaneEntry 1 }
|
||||
|
||||
bcsiOptMonLaneTemperature OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the transmitter laser
|
||||
diode temperature for the lane in the interface. This
|
||||
object indicates the health of the transmitter.
|
||||
|
||||
The format is xxx.yyyy C(elcius), followed by whether
|
||||
the measured value is normal, high/low alarm or
|
||||
high/low warning."
|
||||
::= { bcsiOptMonLaneEntry 2 }
|
||||
|
||||
bcsiOptMonLaneTxPowerStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
notSupported(1),
|
||||
notApplicable(2),
|
||||
highAlarm(3),
|
||||
highWarn(4),
|
||||
normal(5),
|
||||
lowWarn(6),
|
||||
lowAlarm(7)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the status of the transmitter optical
|
||||
signal power for the lane in the interface, indicating
|
||||
whether this is normal or an alarm is present."
|
||||
::= { bcsiOptMonLaneEntry 3 }
|
||||
|
||||
bcsiOptMonLaneTxPower OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the transmitter optical
|
||||
signal power for the lane in the interface, measured in
|
||||
dBm, followed by whether this is a normal value, or
|
||||
high/low warning or alarm."
|
||||
::= { bcsiOptMonLaneEntry 4 }
|
||||
|
||||
bcsiOptMonLaneTxPowerVal OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "microWatt"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the transmitter optical
|
||||
signal power for the lane in the interface, measured in microWatt."
|
||||
::= { bcsiOptMonLaneEntry 5 }
|
||||
|
||||
bcsiOptMonLaneRxPowerStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
notSupported(1),
|
||||
notApplicable(2),
|
||||
highAlarm(3),
|
||||
highWarn(4),
|
||||
normal(5),
|
||||
lowWarn(6),
|
||||
lowAlarm(7)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the status of the receiver optical signal power
|
||||
for the lane in the interface, indicating whether this is normal or
|
||||
an alarm is present."
|
||||
::= { bcsiOptMonLaneEntry 6 }
|
||||
|
||||
bcsiOptMonLaneRxPower OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the receiver optical
|
||||
signal power for the lane in the interface, measured in
|
||||
dBm, followed by whether this is a normal value, or
|
||||
high/low warning or alarm."
|
||||
::= { bcsiOptMonLaneEntry 7 }
|
||||
|
||||
bcsiOptMonLaneRxPowerVal OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "microWatt"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the receiver optical signal power
|
||||
for the lane in the interface, measured in microWatt."
|
||||
::= { bcsiOptMonLaneEntry 8 }
|
||||
|
||||
bcsiOptMonLaneTxBiasCurrent OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Tx Bias Current. It is measured in mA, and is followed
|
||||
by whether this is a normal value, or high/low warning or
|
||||
alarm."
|
||||
::= { bcsiOptMonLaneEntry 9 }
|
||||
|
||||
-- Optical Table for module level optical parameters like Temperature, Tx Power,
|
||||
-- Rx Power and Tx Bias Current.
|
||||
|
||||
bcsiOptMonInfoTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF BcsiOptMonInfoEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table lists the instrumented parameters of all
|
||||
optical interfaces."
|
||||
REFERENCE
|
||||
"ITU recommendations G.783, G.784, G.953"
|
||||
::= { bcsiOptMonObjects 2}
|
||||
|
||||
bcsiOptMonInfoEntry OBJECT-TYPE
|
||||
SYNTAX BcsiOptMonInfoEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Only the ifIndices of optical interfaces
|
||||
whose parameters need to be monitored will
|
||||
be used to index this table."
|
||||
INDEX { ifIndex }
|
||||
::= { bcsiOptMonInfoTable 1 }
|
||||
|
||||
BcsiOptMonInfoEntry ::=
|
||||
SEQUENCE {
|
||||
bcsiOptMonTemperature
|
||||
DisplayString,
|
||||
bcsiOptMonTxPowerStatus
|
||||
INTEGER,
|
||||
bcsiOptMonTxPower
|
||||
SnmpAdminString,
|
||||
bcsiOptMonTxPowerVal
|
||||
Unsigned32,
|
||||
bcsiOptMonRxPowerStatus
|
||||
INTEGER,
|
||||
bcsiOptMonRxPower
|
||||
SnmpAdminString,
|
||||
bcsiOptMonRxPowerVal
|
||||
Unsigned32,
|
||||
bcsiOptMonTxBiasCurrent
|
||||
DisplayString
|
||||
}
|
||||
|
||||
bcsiOptMonTemperature OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the transmitter laser
|
||||
diode temperature for the interface. This object
|
||||
indicates the health of the transmitter.
|
||||
|
||||
The format is xxx.yyyy C(elcius), followed by whether
|
||||
the measured value is normal, high/low alarm or
|
||||
high/low warning.
|
||||
For 100G and 40G optic, this returns the average
|
||||
temperature for all lanes."
|
||||
::= { bcsiOptMonInfoEntry 1 }
|
||||
|
||||
bcsiOptMonTxPowerStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
notSupported(1),
|
||||
notApplicable(2),
|
||||
highAlarm(3),
|
||||
highWarn(4),
|
||||
normal(5),
|
||||
lowWarn(6),
|
||||
lowAlarm(7)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the status of the transmit optical
|
||||
signal power for the interface, indicating whether this is normal or an alarm is present."
|
||||
::= { bcsiOptMonInfoEntry 2 }
|
||||
|
||||
bcsiOptMonTxPower OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the transmitter optical
|
||||
signal power for the interface, measured in dBm, followed
|
||||
by whether this is a normal value, or high/low warning
|
||||
or alarm. For 100G optic, this returns the aggregated
|
||||
Tx Power for all lanes."
|
||||
::= { bcsiOptMonInfoEntry 3 }
|
||||
|
||||
bcsiOptMonTxPowerVal OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "microWatt"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the transmitter optical
|
||||
signal power for the interface, measured in microWatt.
|
||||
For 100G optic, this returns the aggregated
|
||||
Tx Power for all lanes "
|
||||
::= { bcsiOptMonInfoEntry 4 }
|
||||
|
||||
bcsiOptMonRxPowerStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
notSupported(1),
|
||||
notApplicable(2),
|
||||
highAlarm(3),
|
||||
highWarn(4),
|
||||
normal(5),
|
||||
lowWarn(6),
|
||||
lowAlarm(7)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the status of the receiver optical signal
|
||||
power for the interface, indicating whether this is normal or an alarm is present."
|
||||
::= { bcsiOptMonInfoEntry 5 }
|
||||
|
||||
bcsiOptMonRxPower OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the receiver optical
|
||||
signal power for the interface, measured in dBm, followed
|
||||
by whether this is a normal value, or high/low warning
|
||||
or alarm.
|
||||
For 100G and 40G optic, this returns the aggregated
|
||||
Rx Power for all lanes."
|
||||
::= { bcsiOptMonInfoEntry 6 }
|
||||
|
||||
bcsiOptMonRxPowerVal OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "microWatt"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object holds the value of the receiver optical
|
||||
signal power for the interface, measured in microWatt.
|
||||
For 100G and 40G optic, this returns the aggregated
|
||||
Rx Power for all lanes "
|
||||
::= { bcsiOptMonInfoEntry 7 }
|
||||
|
||||
bcsiOptMonTxBiasCurrent OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Tx Bias Current. It is measured in mA, and is followed
|
||||
by whether this is a normal value, or high/low warning or
|
||||
alarm.
|
||||
For 100G and 40G optic, this returns the aggregated
|
||||
Tx Bias Current for all lanes."
|
||||
::= { bcsiOptMonInfoEntry 8 }
|
||||
|
||||
bcsiIfMediaInfoTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF BcsiIfMediaInfoEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table lists the information of the media device
|
||||
(SFP/XFP/Copper) installed in the physical port.
|
||||
Only the ifIndices of Ethernet ports those are associated
|
||||
with the operational cards will be included in this table."
|
||||
::= { bcsiOptMonObjects 3 }
|
||||
|
||||
bcsiIfMediaInfoEntry OBJECT-TYPE
|
||||
SYNTAX BcsiIfMediaInfoEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry in this table. The ifIndices of ethernet interfaces
|
||||
will be used to index this table."
|
||||
INDEX { ifIndex }
|
||||
::= { bcsiIfMediaInfoTable 1 }
|
||||
|
||||
BcsiIfMediaInfoEntry ::=
|
||||
SEQUENCE {
|
||||
bcsiIfMediaType
|
||||
DisplayString,
|
||||
bcsiIfMediaVendorName
|
||||
DisplayString,
|
||||
bcsiIfMediaVersion
|
||||
DisplayString,
|
||||
bcsiIfMediaPartNumber
|
||||
DisplayString,
|
||||
bcsiIfMediaSerialNumber
|
||||
DisplayString
|
||||
}
|
||||
|
||||
bcsiIfMediaType OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..128))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"he type of the media installed in the physical port."
|
||||
::= { bcsiIfMediaInfoEntry 1 }
|
||||
|
||||
bcsiIfMediaVendorName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..128))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The media vendor name, full name of the corporation."
|
||||
::= { bcsiIfMediaInfoEntry 2 }
|
||||
|
||||
bcsiIfMediaVersion OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..128))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The media vendor product version number."
|
||||
::= { bcsiIfMediaInfoEntry 3 }
|
||||
|
||||
bcsiIfMediaPartNumber OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..128))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The media vendor part number."
|
||||
::= { bcsiIfMediaInfoEntry 4 }
|
||||
|
||||
bcsiIfMediaSerialNumber OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE (0..128))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The vendor serial number of the media device."
|
||||
::= { bcsiIfMediaInfoEntry 5 }
|
||||
--
|
||||
-- Conformance
|
||||
--
|
||||
|
||||
bcsiOptMonCompliances OBJECT IDENTIFIER
|
||||
::= { bcsiOptMonConformance 1 }
|
||||
bcsiOptMonGroups OBJECT IDENTIFIER
|
||||
::= { bcsiOptMonConformance 2 }
|
||||
|
||||
bcsiOptMonCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for entities which
|
||||
implement BROCADE-OPTICAL-MONITORING-MIB."
|
||||
MODULE
|
||||
MANDATORY-GROUPS { bcsiOptMonLaneMonGroup ,
|
||||
bcsiOptMonInfoMonGroup,
|
||||
bcsiIfMediaGroup
|
||||
}
|
||||
::= { bcsiOptMonCompliances 1 }
|
||||
|
||||
--
|
||||
-- Units of Conformance
|
||||
--
|
||||
|
||||
bcsiOptMonLaneMonGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
bcsiOptMonLaneNum,
|
||||
bcsiOptMonLaneTemperature,
|
||||
bcsiOptMonLaneTxPowerStatus,
|
||||
bcsiOptMonLaneTxPower,
|
||||
bcsiOptMonLaneTxPowerVal,
|
||||
bcsiOptMonLaneRxPowerStatus,
|
||||
bcsiOptMonLaneRxPower,
|
||||
bcsiOptMonLaneRxPowerVal,
|
||||
bcsiOptMonLaneTxBiasCurrent
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects for Optical Lane Monitoring of interface optics."
|
||||
::= { bcsiOptMonGroups 1 }
|
||||
|
||||
bcsiOptMonInfoMonGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
bcsiOptMonTemperature,
|
||||
bcsiOptMonTxPowerStatus,
|
||||
bcsiOptMonTxPower,
|
||||
bcsiOptMonTxPowerVal,
|
||||
bcsiOptMonRxPowerStatus,
|
||||
bcsiOptMonRxPower,
|
||||
bcsiOptMonRxPowerVal,
|
||||
bcsiOptMonTxBiasCurrent
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects for Optical Monitoring of interface optics."
|
||||
::= { bcsiOptMonGroups 2 }
|
||||
|
||||
bcsiIfMediaGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
bcsiIfMediaType,
|
||||
bcsiIfMediaVendorName,
|
||||
bcsiIfMediaVersion,
|
||||
bcsiIfMediaPartNumber,
|
||||
bcsiIfMediaSerialNumber
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects for monitoring media information of interfaces."
|
||||
::= { bcsiOptMonGroups 3 }
|
||||
END
|
||||
|
||||
-- ========================================================================================
|
||||
|
||||
|
||||
Reference in New Issue
Block a user