david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
David Leutgeb
2023-12-05 12:25:34 +01:00
commit 98a672123c
4378 changed files with 8817503 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

857
MIBS/junos/BFD-STD-MIB Normal file
View File

@@ -0,0 +1,857 @@
BFD-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter32, Counter64,
NOTIFICATION-TYPE
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TEXTUAL-CONVENTION, TruthValue,
RowStatus, StorageType, TimeStamp
FROM SNMPv2-TC -- [RFC2579]
InetAddress, InetAddressType, InetPortNumber
FROM INET-ADDRESS-MIB -- [RFC3291]
-- Juniper specific *** JNX ***
jnxBfdExperiment -- *** JNX ***
FROM JUNIPER-EXPERIMENT-MIB -- *** JNX ***
;
bfdMIB MODULE-IDENTITY
LAST-UPDATED "200507221200Z" -- 04 July 2005 12:00:00 EST
ORGANIZATION "IETF"
CONTACT-INFO
" Thomas D. Nadeau
Cisco Systems, Inc.
Email: tnadeau@cisco.com
Zafar Ali
Cisco Systems, Inc.
Email: zali@cisco.com
"
DESCRIPTION
"Bidirectional Forwarding Management Information Base."
-- Revision history.
REVISION
"200508221200Z" -- 04 August 2005 12:00:00 EST
DESCRIPTION
"Initial version. Published as RFC xxxx." -- RFC-editor pls fill
-- in xxxx
::= { jnxBfdExperiment 1 }
-- Top level components of this MIB module.
bfdNotifications OBJECT IDENTIFIER ::= { bfdMIB 0 }
bfdObjects OBJECT IDENTIFIER ::= { bfdMIB 1 }
bfdConformance OBJECT IDENTIFIER ::= { bfdMIB 3 }
bfdScalarObjects OBJECT IDENTIFIER ::= { bfdObjects 1 }
-- Textual Conventions
BfdSessIndexTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index used to uniquely identify BFD sessions."
SYNTAX Unsigned32 (1..4294967295)
BfdInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The BFD interval delay in microseconds."
SYNTAX Unsigned32 (1..4294967295)
BfdDiag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A common BFD diagnostic code."
SYNTAX INTEGER { noDiagnostic(1),
controlDetectionTimeExpired(2),
echoFunctionFailed(3),
neighborSignaledSessionDown(4),
forwardingPlaneReset(5),
pathDown(6),
concatenatedPathDown(7),
administrativelyDown(8),
reverseConcatenatedPathDown (9)
}
-- BFD General Variables
-- These parameters apply globally to the Router's
-- BFD Process.
bfdAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
-- MAX-ACCESS read-write
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global administrative status of BFD in this router.
The value 'enabled' denotes that the BFD Process is
active on at least one interface; 'disabled' disables
it on all interfaces."
DEFVAL { enabled }
::= { bfdScalarObjects 1 }
bfdVersionNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current version number of the BFD protocol."
REFERENCE
" BFD Version 0 (draft-katz-ward-bfd-02.txt)"
DEFVAL { 0 }
::= { bfdScalarObjects 3 }
-- BFD Session Table
-- The BFD Session Table specifies BFD session specific
-- information.
bfdSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF BfdSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Table describes the BFD sessions."
REFERENCE
"BFD Version 0 (draft-katz-ward-bfd-02.txt)"
::= { bfdObjects 2 }
bfdSessEntry OBJECT-TYPE
SYNTAX BfdSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Entry describes BFD session."
INDEX { bfdSessIndex }
::= { bfdSessTable 1 }
BfdSessEntry ::= SEQUENCE {
bfdSessIndex BfdSessIndexTC,
bfdSessApplicationId Unsigned32,
bfdSessDiscriminator Unsigned32,
bfdSessRemoteDiscr Unsigned32,
bfdSessUdpPort InetPortNumber,
bfdSessState INTEGER,
bfdSessRemoteHeardFlag TruthValue,
bfdSessDiag Unsigned32,
bfdSessOperMode INTEGER,
bfdSessDemandModeDesiredFlag TruthValue,
bfdSessEchoFuncModeDesiredFlag TruthValue,
bfdSessControlPlanIndepFlag TruthValue,
bfdSessAddrType InetAddressType,
bfdSessAddr InetAddress,
bfdSessDesiredMinTxInterval BfdInterval,
bfdSessDesiredMinRxInterval BfdInterval,
bfdSessDesiredMinEchoRxInterval BfdInterval,
bfdSessDetectMult Unsigned32,
bfdSessStorType StorageType,
bfdSessRowStatus RowStatus,
bfdSessAuthPresFlag TruthValue,
bfdSessAuthenticationType INTEGER
}
bfdSessIndex OBJECT-TYPE
SYNTAX BfdSessIndexTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains an index used to represent a
unique BFD session on this device."
::= { bfdSessEntry 1 }
bfdSessApplicationId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an index used to indicate
a local application which owns or maintains this
BFD session. For instance, the MPLS VPN process may
maintain a subset of the total number of BFD
sessions. This application ID provides a convenient
way to segregate sessions by the applications which
maintain them."
::= { bfdSessEntry 2 }
bfdSessDiscriminator OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the local discriminator for this BFD
session, used to uniquely identify it."
::= { bfdSessEntry 3 }
bfdSessRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the session discriminator chosen
by the remote system for this BFD session."
::= { bfdSessEntry 4 }
bfdSessUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP Port for BFD. The default value is the
well-known value for this port."
REFERENCE
"draft-katz-ward-bfd-02.txt and
draft-raggarwa-mpls-bfd-00.txt"
DEFVAL { 0 }
::= { bfdSessEntry 5 }
bfdSessState OBJECT-TYPE
SYNTAX INTEGER {
adminDown(1),
down(2),
init(3),
up(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The perceived state of the BFD session."
::= { bfdSessEntry 6 }
bfdSessRemoteHeardFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remote system, and is set to false(0) if the local system
has not received BFD packets recently (within the detection
time) or if the local system is attempting to tear down
the BFD session."
::= { bfdSessEntry 7 }
bfdSessDiag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A diagnostic code specifying the local system's reason
for the last transition of the session from up(1)
to some other state."
::= { bfdSessEntry 8 }
bfdSessOperMode OBJECT-TYPE
SYNTAX INTEGER { asyncModeWEchoFun(1),
asynchModeWOEchoFun(2),
demandModeWEchoFunction(3),
demandModeWOEchoFunction(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies current operating mode that BFD
session is operating in.
A value of AsyncModeWEchoFun(1) ...
A value of AsynchModeWOEchoFun(2) ...
A value of DemandModeWEchoFunction(3) ...
A value of DemandModeWOEchoFunction(4) ...
"
::= { bfdSessEntry 9 }
bfdSessDemandModeDesiredFlag OBJECT-TYPE
SYNTAX TruthValue
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(0) if not"
DEFVAL { false }
::= { bfdSessEntry 10 }
bfdSessEchoFuncModeDesiredFlag OBJECT-TYPE
SYNTAX TruthValue
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not"
DEFVAL { false }
::= { bfdSessEntry 11 }
bfdSessControlPlanIndepFlag OBJECT-TYPE
SYNTAX TruthValue
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of the control plane. Otherwise, the
value is set to false(0)"
DEFVAL { false }
::= { bfdSessEntry 12 }
bfdSessAddrType OBJECT-TYPE
SYNTAX InetAddressType
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies IP address of the interface
associated with this BFD session.
Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.
A value of unknown(0) is allowed only when
the outgoing interface is of type point-to-point, or
when the BFD session is not associated with a specific
interface.
If any other unsupported values are attempted in a set
operation, the agent MUST return an inconsistentValue
error.
"
::= { bfdSessEntry 13 }
bfdSessAddr OBJECT-TYPE
SYNTAX InetAddress
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies IP address of the interface
associated with this BFD session.
It can also be used to enabled BFD on a specific
interface. The value is set to zero when BFD session is not
associated with a specific interface. "
::= { bfdSessEntry 14 }
bfdSessDesiredMinTxInterval OBJECT-TYPE
SYNTAX BfdInterval
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets."
::= { bfdSessEntry 15 }
bfdSessDesiredMinRxInterval OBJECT-TYPE
SYNTAX BfdInterval
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting."
::= { bfdSessEntry 16 }
bfdSessDesiredMinEchoRxInterval OBJECT-TYPE
SYNTAX BfdInterval
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting."
::= { bfdSessEntry 17 }
bfdSessDetectMult OBJECT-TYPE
SYNTAX Unsigned32
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Detect time multiplier."
::= { bfdSessEntry 18 }
bfdSessStorType OBJECT-TYPE
SYNTAX StorageType
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row."
::= { bfdSessEntry 19 }
bfdSessRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
bfdSessRowStatus and bfdSessStorageType."
::= { bfdSessEntry 20 }
bfdSessAuthPresFlag OBJECT-TYPE
SYNTAX TruthValue
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(0) if not"
DEFVAL { false }
::= { bfdSessEntry 21 }
bfdSessAuthenticationType OBJECT-TYPE
SYNTAX INTEGER { simplePassword(1),
keyedMD5(2),
meticulousKeyedMD5(3),
keyedSHA1(4),
meticulousKeyedSHA1(5)
}
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Authentication Type used for this BFD session. This
field is valid only when the Authentication Present bit is set"
::= { bfdSessEntry 22 }
-- BFD Session Performance Table
bfdSessPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF BfdSessPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies BFD Session performance counters."
::= { bfdObjects 3 }
bfdSessPerfEntry OBJECT-TYPE
SYNTAX BfdSessPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by a BFD-enabled node for
every BFD Session. bfdCounterDiscontinuityTime is used to
indicate potential discontinuity for all counter objects
in this table."
AUGMENTS { bfdSessEntry }
::= { bfdSessPerfTable 1 }
BfdSessPerfEntry ::= SEQUENCE {
bfdSessPerfPktIn Counter32,
bfdSessPerfPktOut Counter32,
bfdSessUpTime TimeStamp,
bfdSessPerfLastSessDownTime TimeStamp,
bfdSessPerfLastCommLostDiag BfdDiag,
bfdSessPerfSessUpCount Counter32,
bfdSessPerfDiscTime TimeStamp,
-- High Capacity Counters
bfdSessPerfPktInHC Counter64,
bfdSessPerfPktOutHC Counter64
}
-- Ed Note: should we add per-diag code counts here,
bfdSessPerfPktIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD messages received for this BFD
session."
::= { bfdSessPerfEntry 1 }
bfdSessPerfPktOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD messages sent for this BFD session."
::= { bfdSessPerfEntry 2 }
bfdSessUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
the session came up. If no such up event exists this object
contains a zero value."
::= { bfdSessPerfEntry 3 }
bfdSessPerfLastSessDownTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
the last time communication was lost with the neighbor. If
no such down event exist this object contains a zero value."
::= { bfdSessPerfEntry 4 }
bfdSessPerfLastCommLostDiag OBJECT-TYPE
SYNTAX BfdDiag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BFD diag code for the last time communication was lost
with the neighbor. If no such down event exists this object
contains a zero value."
::= { bfdSessPerfEntry 5 }
bfdSessPerfSessUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this session has gone into the Up
state since the router last rebooted."
::= { bfdSessPerfEntry 6 }
bfdSessPerfDiscTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which any one or more of the session counters suffered
a discontinuity.
The relevant counters are the specific instances associated
with this BFD session of any Counter32 object contained in
the BfdSessPerfTable. If no such discontinuities have occurred
since the last re-initialization of the local management
subsystem, then this object contains a zero value."
::= { bfdSessPerfEntry 7 }
bfdSessPerfPktInHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of BFD messages
received for this BFD session. It MUST be equal to the
least significant 32 bits of bfdSessPerfPktIn
if bfdSessPerfPktInHC is supported according to
the rules spelled out in RFC2863."
::= { bfdSessPerfEntry 8 }
bfdSessPerfPktOutHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of
total number of BFD messages transmitted for this
BFD session. It MUST be equal to the
least significant 32 bits of bfdSessPerfPktIn
if bfdSessPerfPktOutHC is supported according to
the rules spelled out in RFC2863."
::= { bfdSessPerfEntry 9 }
-- BFD Session Mapping Table
bfdSessMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF BfdSessMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Mapping Table maps the complex
indexing of the BFD sessions to the flat
BFDIndex used in the BfdSessionTable.
Implementors need to be aware that if the value of
the bfdSessAddr (an OID) has more
that 111 sub-identifiers, then OIDs of column
instances in this table will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3.
"
REFERENCE
"BFD Version 0 (draft-katz-ward-bfd-02.txt)"
::= { bfdObjects 4 }
bfdSessMapEntry OBJECT-TYPE
SYNTAX BfdSessMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Entry describes BFD session
that is mapped to this index.
Implementors need to be aware that if the value of
the mplsInSegmentMapLabelPtrIndex (an OID) has more
that 111 sub-identifiers, then OIDs of column
instances in this table will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3."
INDEX { bfdSessApplicationId,
bfdSessDiscriminator,
bfdSessAddrType,
bfdSessAddr
}
::= { bfdSessMapTable 1 }
BfdSessMapEntry ::= SEQUENCE {
bfdSessMapBfdIndex BfdSessIndexTC
}
bfdSessMapBfdIndex OBJECT-TYPE
SYNTAX BfdSessIndexTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the BfdIndex referred to by
the indexes of this row. In essence, a mapping is
provided between these indexes and the BfdSessTable."
::= { bfdSessMapEntry 1 }
-- Notification Configuration
bfdSessNotificationsEnable OBJECT-TYPE
SYNTAX TruthValue
-- MAX-ACCESS read-write
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of bfdSessUp and bfdSessDown
notifications; otherwise these notifications are not
emitted."
REFERENCE
"See also RFC3413 for explanation that
notifications are under the ultimate control of the
MIB modules in this document."
DEFVAL { false }
::= { bfdScalarObjects 4 }
bfdSessUp NOTIFICATION-TYPE
OBJECTS { bfdSessDiag, -- low range value
bfdSessDiag -- high range value
}
STATUS current
DESCRIPTION
"This notification is generated when the
bfdSessState object for one or more contiguous
entries in bfdSessTable are about to enter the up(2)
state from some other state. The included values of
bfdSessDiag MUST both be set equal to this
new state (i.e: up(1)). The two instances of
bfdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For the
cases where a contiguous range of sessions
have transitioned into the up(1) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single bfdSessEntry, then
the instance identifier (and values) of the two
bfdSessDiag objects MUST be the identical."
::= { bfdNotifications 1 }
bfdSessDown NOTIFICATION-TYPE
OBJECTS { bfdSessDiag, -- low range value
bfdSessDiag -- high range value
}
STATUS current
DESCRIPTION
"This notification is generated when the
bfdSessState object for one or more contiguous
entries in bfdSessTable are about to enter the down(4)
or adminDown(5) states from some other state. The included
values of bfdSessDiag MUST both be set equal to this
new state (i.e: down(4) or adminDown(5)). The two instances
of bfdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of sessions
have transitioned into the down(4) or adminDown(5) states
at roughly the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single bfdSessEntry, then
the instance identifier (and values) of the two
bfdSessDiag objects MUST be the identical."
::= { bfdNotifications 2 }
-- Ed Note: We need to add notification for changes
-- when the two ends automatically negotiate to a new detection time
-- value or when detection multiplier changes.
-- Similarly, changes in the operating mode (bfdSessOperMode)
-- also need to be notified.
-- Module compliance.
bfdGroups
OBJECT IDENTIFIER ::= { bfdConformance 1 }
bfdCompliances
OBJECT IDENTIFIER ::= { bfdConformance 2 }
-- Compliance requirement for fully compliant implementations.
bfdModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance statement for agents that provide full
support for BFD-MIB. Such devices can
then be monitored and also be configured using
this MIB module."
MODULE -- This module.
MANDATORY-GROUPS {
bfdSessionGroup,
bfdSessionPerfGroup,
bfdSessionPerfHCGroup,
bfdNotificationGroup
}
-- GROUP bfdSessionPerfHCGroup
-- DESCRIPTION "This group is mandatory for those bfdPerfTable
-- entries for which any of the objects
-- bfdSessPerfPktInHC or bfdSessPerfPktOutHC
-- wraps around too quickly
-- based on the criteria specified in RFC 2863 for
-- high-capacity counters."
--
-- GROUP bfdNotificationGroup
-- DESCRIPTION "This group is only mandatory for those
-- implementations which can efficiently implement
-- the notifications contained in this group."
--
OBJECT bfdSessAddrType
SYNTAX InetAddressType {
unknown(0),
ipv4(1),
ipv6(2)
}
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required."
OBJECT bfdSessAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION "An implementation is only required to support
unknown(0), ipv4(1) and ipv6(2) sizes."
::= { bfdCompliances 1 }
-- Read-Only Conformance TBD...
-- Units of conformance.
bfdSessionGroup OBJECT-GROUP
OBJECTS {
bfdSessNotificationsEnable,
bfdAdminStatus,
bfdVersionNumber,
bfdSessApplicationId,
bfdSessDiscriminator,
bfdSessAddrType,
bfdSessAddr,
bfdSessRemoteDiscr,
bfdSessUdpPort,
bfdSessState,
bfdSessRemoteHeardFlag,
bfdSessDiag,
bfdSessOperMode,
bfdSessDemandModeDesiredFlag,
bfdSessEchoFuncModeDesiredFlag,
bfdSessControlPlanIndepFlag,
bfdSessDesiredMinTxInterval,
bfdSessDesiredMinRxInterval,
bfdSessDesiredMinEchoRxInterval,
bfdSessDetectMult,
bfdSessStorType,
bfdSessRowStatus,
bfdSessMapBfdIndex,
bfdSessAuthPresFlag,
bfdSessAuthenticationType
}
STATUS current
DESCRIPTION
"Collection of objects needed for BFD sessions."
::= { bfdGroups 1 }
bfdSessionPerfGroup OBJECT-GROUP
OBJECTS {
bfdSessPerfPktIn,
bfdSessPerfPktOut,
bfdSessUpTime,
bfdSessPerfLastSessDownTime,
bfdSessPerfLastCommLostDiag,
bfdSessPerfSessUpCount,
bfdSessPerfDiscTime
}
STATUS current
DESCRIPTION
"Collection of objects needed to monitor the
performance of BFD sessions."
::= { bfdGroups 2 }
bfdSessionPerfHCGroup OBJECT-GROUP
OBJECTS {
bfdSessPerfPktInHC,
bfdSessPerfPktOutHC
}
STATUS current
DESCRIPTION
"Collection of objects needed to monitor the
performance of BFD sessions for which the
values of bfdSessPerfPktIn, bfdSessPerfPktOut
wrap around too quickly."
::= { bfdGroups 3 }
bfdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
bfdSessUp,
bfdSessDown
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this
module."
::= { bfdGroups 4 }
END