Initial commit
This commit is contained in:
David Leutgeb
666
MIBS/junos/JUNIPER-DOM-MIB
Normal file
666
MIBS/junos/JUNIPER-DOM-MIB
Normal file
@ -0,0 +1,666 @@
|
||||
--
|
||||
-- Juniper Enterprise Specific MIB: SFF Digital Optical Monitor MIB
|
||||
--
|
||||
-- Copyright (c) 2010, Juniper Networks, Inc.
|
||||
-- All rights reserved.
|
||||
--
|
||||
-- The contents of this document are subject to change without notice.
|
||||
--
|
||||
|
||||
JUNIPER-DOM-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE
|
||||
FROM SNMPv2-SMI
|
||||
DateAndTime, TEXTUAL-CONVENTION
|
||||
FROM SNMPv2-TC
|
||||
jnxDomMibRoot, jnxDomNotifications, jnxDomLaneNotifications
|
||||
FROM JUNIPER-SMI
|
||||
ifIndex, ifDescr
|
||||
FROM IF-MIB;
|
||||
|
||||
-- DOM Alarm and Warning Type
|
||||
|
||||
jnxDomMib MODULE-IDENTITY
|
||||
LAST-UPDATED "201403200000Z" -- Thu Mar 03 2009 UTC
|
||||
ORGANIZATION "Juniper Networks, Inc."
|
||||
CONTACT-INFO
|
||||
" Juniper Technical Assistance Center
|
||||
Juniper Networks, Inc.
|
||||
1133 Innovation Way
|
||||
Sunnyvale, CA 94089
|
||||
E-mail: support@juniper.net"
|
||||
|
||||
DESCRIPTION
|
||||
"This MIB module defines objects used for Digital Optical
|
||||
Monitor on interface of Juniper products."
|
||||
REVISION "201403200000Z"
|
||||
DESCRIPTION
|
||||
"Change XFP references to generic SFF in descriptions. Add
|
||||
DOM lane table."
|
||||
REVISION "200912230000Z"
|
||||
DESCRIPTION
|
||||
"Initial revision."
|
||||
::= { jnxDomMibRoot 1 }
|
||||
|
||||
JnxDomAlarmId ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Identifies specific DOM alarms that may exist on an
|
||||
interface."
|
||||
SYNTAX BITS {
|
||||
domRxLossSignalAlarm(0), -- Input Loss of signal
|
||||
domRxCDRLossLockAlarm(1), -- Input Loss of Lock
|
||||
domRxNotReadyAlarm(2), -- Input rx path
|
||||
domRxLaserPowerHighAlarm(3), -- Input laser power
|
||||
domRxLaserPowerLowAlarm(4), -- Input laser power
|
||||
domTxLaserBiasCurrentHighAlarm(5), -- Output laser bias current
|
||||
domTxLaserBiasCurrentLowAlarm(6), -- Output laser bias current
|
||||
domTxLaserOutputPowerHighAlarm(7), -- Output laser power
|
||||
domTxLaserOutputPowerLowAlarm(8), -- Output laser power
|
||||
domTxDataNotReadyAlarm(9), -- Output A/D data not ready
|
||||
domTxNotReadyAlarm(10), -- Output tx path
|
||||
domTxLaserFaultAlarm(11), -- Output laser safety
|
||||
domTxCDRLossLockAlarm(12), -- Output CDR
|
||||
domModuleTemperatureHighAlarm(13), -- Module temperature
|
||||
domModuleTemperatureLowAlarm(14), -- Module temperature
|
||||
domModuleNotReadyAlarm(15), -- Module MOD_NR
|
||||
domModulePowerDownAlarm(16), -- Module P_DOWN
|
||||
domLinkDownAlarm(17), -- Wire Unplugged or Down
|
||||
domModuleRemovedAlarm(18), -- Module Unplugged or Down
|
||||
domModuleVoltageHighAlarm(19), -- Module Voltage High
|
||||
domModuleVoltageLowAlarm(20) -- Module Voltage Low
|
||||
}
|
||||
|
||||
JnxDomWarningId ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Identifies specific DOM warnings that may exist on an
|
||||
interface."
|
||||
SYNTAX BITS {
|
||||
domRxLaserPowerHighWarning(0), -- Input laser power
|
||||
domRxLaserPowerLowWarning(1), -- Input laser power
|
||||
domTxLaserBiasCurrentHighWarning(2), -- Output laser bias current
|
||||
domTxLaserBiasCurrentLowWarning(3), -- Output laser bias current
|
||||
domTxLaserOutputPowerHighWarning(4), -- Output laser power
|
||||
domTxLaserOutputPowerLowWarning(5), -- Output laser power
|
||||
domModuleTemperatureHighWarning(6), -- Module temperature
|
||||
domModuleTemperatureLowWarning(7), -- Module temperature
|
||||
domModuleVoltageHighWarning(8), -- Module voltage
|
||||
domModuleVoltageLowWarning(9) -- Module voltage
|
||||
}
|
||||
|
||||
JnxDomLaneAlarmId ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Identifies specific DOM alarms that may exist on
|
||||
a Lane of a SFF interface"
|
||||
SYNTAX BITS {
|
||||
domLaneRxLaserPowerHighAlarm(0),
|
||||
domLaneRxLaserPowerLowAlarm(1),
|
||||
domLaneTxLaserBiasCurrentHighAlarm(2),
|
||||
domLaneTxLaserBiasCurrentLowAlarm(3),
|
||||
domLaneTxLaserOutputPowerHighAlarm(4),
|
||||
domLaneTxLaserOutputPowerLowAlarm(5),
|
||||
domLaneLaserTemperatureHighAlarm(6),
|
||||
domLaneLaserTemperatureLowAlarm(7)
|
||||
}
|
||||
|
||||
JnxDomLaneWarningId ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Identifies specific DOM warnings that may exist on
|
||||
a Lane of a SFF interface"
|
||||
SYNTAX BITS {
|
||||
domLaneRxLaserPowerHighWarning(0),
|
||||
domLaneRxLaserPowerLowWarning(1),
|
||||
domLaneTxLaserBiasCurrentHighWarning(2),
|
||||
domLaneTxLaserBiasCurrentLowWarning(3),
|
||||
domLaneTxLaserOutputPowerHighWarning(4),
|
||||
domLaneTxLaserOutputPowerLowWarning(5),
|
||||
domLaneLaserTemperatureHighWarning(6),
|
||||
domLaneLaserTemperatureLowWarning(7)
|
||||
}
|
||||
|
||||
--
|
||||
-- Current DOM Statistics
|
||||
--
|
||||
|
||||
jnxDomDigitalMonitoring OBJECT IDENTIFIER ::= { jnxDomMib 1 }
|
||||
|
||||
jnxDomCurrentTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxDomCurrentEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Information about Digital Optical Monitoring for this
|
||||
interfaces on this router."
|
||||
::= { jnxDomDigitalMonitoring 1 }
|
||||
|
||||
jnxDomCurrentEntry OBJECT-TYPE
|
||||
SYNTAX JnxDomCurrentEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Information about Digital Optical Monitoring
|
||||
for this interfaces on this router."
|
||||
INDEX { ifIndex }
|
||||
::= { jnxDomCurrentTable 1 }
|
||||
|
||||
JnxDomCurrentEntry ::=
|
||||
SEQUENCE {
|
||||
jnxDomCurrentAlarms
|
||||
JnxDomAlarmId,
|
||||
jnxDomCurrentAlarmDate
|
||||
DateAndTime,
|
||||
jnxDomLastAlarms
|
||||
JnxDomAlarmId,
|
||||
jnxDomCurrentWarnings
|
||||
JnxDomWarningId,
|
||||
jnxDomCurrentRxLaserPower
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserBiasCurrent
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserOutputPower
|
||||
Integer32,
|
||||
jnxDomCurrentModuleTemperature
|
||||
Integer32,
|
||||
jnxDomCurrentRxLaserPowerHighAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentRxLaserPowerLowAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentRxLaserPowerHighWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentRxLaserPowerLowWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserOutputPowerHighWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentTxLaserOutputPowerLowWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleTemperatureHighAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleTemperatureLowAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleTemperatureHighWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleTemperatureLowWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleVoltage
|
||||
Integer32,
|
||||
jnxDomCurrentModuleVoltageHighAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleVoltageLowAlarmThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleVoltageHighWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleVoltageLowWarningThreshold
|
||||
Integer32,
|
||||
jnxDomCurrentModuleLaneCount
|
||||
Integer32
|
||||
}
|
||||
|
||||
jnxDomCurrentAlarms OBJECT-TYPE
|
||||
SYNTAX JnxDomAlarmId
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object identifies all the active DOM alarms
|
||||
on a SFF physical interface on this router."
|
||||
::= { jnxDomCurrentEntry 1 }
|
||||
|
||||
jnxDomCurrentAlarmDate OBJECT-TYPE
|
||||
SYNTAX DateAndTime
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The system date and time when the management subsystem learned
|
||||
of the current alarm event."
|
||||
::= { jnxDomCurrentEntry 2 }
|
||||
|
||||
jnxDomLastAlarms OBJECT-TYPE
|
||||
SYNTAX JnxDomAlarmId
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object identifies a copy of jnxDomCurrentAlarms
|
||||
before last set or clear."
|
||||
::= { jnxDomCurrentEntry 3 }
|
||||
|
||||
jnxDomCurrentWarnings OBJECT-TYPE
|
||||
SYNTAX JnxDomWarningId
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object identifies all the active DOM warnings
|
||||
on a SFF physical interface on this router."
|
||||
::= { jnxDomCurrentEntry 4 }
|
||||
|
||||
jnxDomCurrentRxLaserPower OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Receiver laser power."
|
||||
::= { jnxDomCurrentEntry 5 }
|
||||
|
||||
jnxDomCurrentTxLaserBiasCurrent OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 mA"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser bias current."
|
||||
::= { jnxDomCurrentEntry 6 }
|
||||
|
||||
|
||||
jnxDomCurrentTxLaserOutputPower OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser output power."
|
||||
::= { jnxDomCurrentEntry 7 }
|
||||
|
||||
jnxDomCurrentModuleTemperature OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Celsius (degrees C)"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module temperature."
|
||||
::= { jnxDomCurrentEntry 8 }
|
||||
|
||||
jnxDomCurrentRxLaserPowerHighAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Receiver laser power high alarm threshold."
|
||||
::= { jnxDomCurrentEntry 9 }
|
||||
|
||||
jnxDomCurrentRxLaserPowerLowAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Receiver laser power low alarm threshold."
|
||||
::= { jnxDomCurrentEntry 10 }
|
||||
|
||||
jnxDomCurrentRxLaserPowerHighWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Receiver laser power high warning threshold."
|
||||
::= { jnxDomCurrentEntry 11 }
|
||||
|
||||
jnxDomCurrentRxLaserPowerLowWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Receiver laser power low warning threshold."
|
||||
::= { jnxDomCurrentEntry 12 }
|
||||
|
||||
jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 mA"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser bias current high alarm threshold."
|
||||
::= { jnxDomCurrentEntry 13 }
|
||||
|
||||
jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 mA"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser bias current low alarm threshold."
|
||||
::= { jnxDomCurrentEntry 14 }
|
||||
|
||||
jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 mA"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser bias current high warning threshold."
|
||||
::= { jnxDomCurrentEntry 15 }
|
||||
|
||||
jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 mA"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser bias current low warning threshold."
|
||||
::= { jnxDomCurrentEntry 16 }
|
||||
|
||||
jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser power high alarm threshold."
|
||||
::= { jnxDomCurrentEntry 17 }
|
||||
|
||||
jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser power low alarm threshold."
|
||||
::= { jnxDomCurrentEntry 18 }
|
||||
|
||||
jnxDomCurrentTxLaserOutputPowerHighWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser power high warning threshold."
|
||||
::= { jnxDomCurrentEntry 19 }
|
||||
|
||||
jnxDomCurrentTxLaserOutputPowerLowWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Transmitter laser power low warning threshold."
|
||||
::= { jnxDomCurrentEntry 20 }
|
||||
|
||||
jnxDomCurrentModuleTemperatureHighAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Celsius (degrees C)"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module temperature high alarm threshold."
|
||||
::= { jnxDomCurrentEntry 21 }
|
||||
|
||||
jnxDomCurrentModuleTemperatureLowAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Celsius (degrees C)"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module temperature low alarm threshold."
|
||||
::= { jnxDomCurrentEntry 22 }
|
||||
|
||||
jnxDomCurrentModuleTemperatureHighWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Celsius (degrees C)"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module temperature high warning threshold."
|
||||
::= { jnxDomCurrentEntry 23 }
|
||||
|
||||
jnxDomCurrentModuleTemperatureLowWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Celsius (degrees C)"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module temperature low warning threshold."
|
||||
::= { jnxDomCurrentEntry 24 }
|
||||
|
||||
jnxDomCurrentModuleVoltage OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module voltage."
|
||||
::= { jnxDomCurrentEntry 25 }
|
||||
|
||||
jnxDomCurrentModuleVoltageHighAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module voltage high alarm threshold."
|
||||
::= { jnxDomCurrentEntry 26 }
|
||||
|
||||
jnxDomCurrentModuleVoltageLowAlarmThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module voltage low alarm threshold."
|
||||
::= { jnxDomCurrentEntry 27 }
|
||||
|
||||
jnxDomCurrentModuleVoltageHighWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module voltage high warning threshold."
|
||||
::= { jnxDomCurrentEntry 28 }
|
||||
|
||||
jnxDomCurrentModuleVoltageLowWarningThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 V"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Module voltage low warning threshold."
|
||||
::= { jnxDomCurrentEntry 29 }
|
||||
|
||||
jnxDomCurrentModuleLaneCount OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Number of Lanes (Lasers) in this module"
|
||||
::= { jnxDomCurrentEntry 30 }
|
||||
|
||||
--
|
||||
-- Current DOM Lane Statistics
|
||||
--
|
||||
|
||||
jnxDomDigitalLaneMonitoring OBJECT IDENTIFIER ::= { jnxDomMib 2 }
|
||||
|
||||
jnxDomModuleLaneTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxDomCurrentLaneEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Table of information for this lane (Laser) of this
|
||||
SFF optical module."
|
||||
::= { jnxDomDigitalLaneMonitoring 1 }
|
||||
|
||||
jnxDomCurrentLaneEntry OBJECT-TYPE
|
||||
SYNTAX JnxDomCurrentLaneEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Information about Digital Optical Monitoring for this
|
||||
lane of this SFF optical Module"
|
||||
INDEX { ifIndex, jnxDomLaneIndex }
|
||||
::= { jnxDomModuleLaneTable 1 }
|
||||
|
||||
JnxDomCurrentLaneEntry ::=
|
||||
SEQUENCE {
|
||||
jnxDomLaneIndex
|
||||
Integer32,
|
||||
jnxDomCurrentLaneAlarms
|
||||
JnxDomLaneAlarmId,
|
||||
jnxDomCurrentLaneAlarmDate
|
||||
DateAndTime,
|
||||
jnxDomLaneLastAlarms
|
||||
JnxDomLaneAlarmId,
|
||||
jnxDomCurrentLaneWarnings
|
||||
JnxDomLaneWarningId,
|
||||
jnxDomCurrentLaneRxLaserPower
|
||||
Integer32,
|
||||
jnxDomCurrentLaneTxLaserBiasCurrent
|
||||
Integer32,
|
||||
jnxDomCurrentLaneTxLaserOutputPower
|
||||
Integer32,
|
||||
jnxDomCurrentLaneLaserTemperature
|
||||
Integer32
|
||||
}
|
||||
|
||||
jnxDomLaneIndex OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..1000)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A lane (Laser) on this SFF optical interface"
|
||||
::= {jnxDomCurrentLaneEntry 1}
|
||||
|
||||
jnxDomCurrentLaneAlarms OBJECT-TYPE
|
||||
SYNTAX JnxDomLaneAlarmId
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object identifies all the active DOM alarms
|
||||
on a particular Lane of a SFF physical interface."
|
||||
::= {jnxDomCurrentLaneEntry 2}
|
||||
|
||||
jnxDomCurrentLaneAlarmDate OBJECT-TYPE
|
||||
SYNTAX DateAndTime
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The system date and time when the management subsystem learned
|
||||
of the current lane alarm event."
|
||||
::= {jnxDomCurrentLaneEntry 3}
|
||||
|
||||
jnxDomLaneLastAlarms OBJECT-TYPE
|
||||
SYNTAX JnxDomLaneAlarmId
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object identifies a copy of jnxDomCurrentAlarms
|
||||
before last set or clear."
|
||||
::= {jnxDomCurrentLaneEntry 4}
|
||||
|
||||
jnxDomCurrentLaneWarnings OBJECT-TYPE
|
||||
SYNTAX JnxDomLaneWarningId
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object identifies all the active DOM warnings
|
||||
on a particular Lane of a SFF physical interface."
|
||||
::= {jnxDomCurrentLaneEntry 5}
|
||||
|
||||
jnxDomCurrentLaneRxLaserPower OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Receiver laser power on a particular Lane of a SFF
|
||||
physcial interface."
|
||||
::= {jnxDomCurrentLaneEntry 6}
|
||||
|
||||
jnxDomCurrentLaneTxLaserBiasCurrent OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.001 mA"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Transmitter laser bias on a particular Lane of a SFF
|
||||
physcial interface."
|
||||
::= {jnxDomCurrentLaneEntry 7}
|
||||
|
||||
jnxDomCurrentLaneTxLaserOutputPower OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "0.01 dbm"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Transmitter laser power on a particular Lane of a SFF
|
||||
physcial interface."
|
||||
::= {jnxDomCurrentLaneEntry 8}
|
||||
|
||||
jnxDomCurrentLaneLaserTemperature OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Celsius (degrees C)"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Temperature of laser on a particular Lane of a SFF
|
||||
physcial interface."
|
||||
::= {jnxDomCurrentLaneEntry 9}
|
||||
|
||||
--
|
||||
-- Configuration Management Notifications
|
||||
--
|
||||
|
||||
jnxDomNotificationPrefix OBJECT IDENTIFIER ::= { jnxDomNotifications 0 }
|
||||
|
||||
jnxDomAlarmSet NOTIFICATION-TYPE
|
||||
OBJECTS { ifDescr,
|
||||
jnxDomLastAlarms,
|
||||
jnxDomCurrentAlarms,
|
||||
jnxDomCurrentAlarmDate }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Notification of a recently set Dom alarm."
|
||||
::= { jnxDomNotificationPrefix 1 }
|
||||
|
||||
jnxDomAlarmCleared NOTIFICATION-TYPE
|
||||
OBJECTS { ifDescr,
|
||||
jnxDomLastAlarms,
|
||||
jnxDomCurrentAlarms,
|
||||
jnxDomCurrentAlarmDate }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Notification of a recently cleared Dom alarm."
|
||||
::= { jnxDomNotificationPrefix 2 }
|
||||
|
||||
jnxDomLaneNotificationPrefix OBJECT IDENTIFIER ::= { jnxDomLaneNotifications 0 }
|
||||
|
||||
jnxDomLaneAlarmSet NOTIFICATION-TYPE
|
||||
OBJECTS { ifDescr,
|
||||
jnxDomLaneIndex,
|
||||
jnxDomLaneLastAlarms,
|
||||
jnxDomCurrentLaneAlarms,
|
||||
jnxDomCurrentLaneAlarmDate }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Notification of a recently set Dom Lane alarm."
|
||||
::= { jnxDomLaneNotificationPrefix 1 }
|
||||
|
||||
jnxDomLaneAlarmCleared NOTIFICATION-TYPE
|
||||
OBJECTS { ifDescr,
|
||||
jnxDomLaneIndex,
|
||||
jnxDomLaneLastAlarms,
|
||||
jnxDomCurrentLaneAlarms,
|
||||
jnxDomCurrentLaneAlarmDate }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Notification of a recently cleared Dom Lane alarm."
|
||||
::= { jnxDomLaneNotificationPrefix 2 }
|
||||
|
||||
END
|
||||
|
||||
Reference in New Issue
Block a user