mibs/MIBS/arris/ARRIS-CM-DEVICE-MIB

ARRIS-CM-DEVICE-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress
      FROM SNMPv2-SMI
   arrisProdIdCM
      FROM ARRIS-MIB
   TruthValue, DisplayString, TEXTUAL-CONVENTION
      FROM SNMPv2-TC;


  arrisCmDevMib MODULE-IDENTITY
     LAST-UPDATED    "0212100000Z" -- December 10, 2002
     ORGANIZATION    "ARRIS Broadband"
     CONTACT-INFO    "Robert Coley
                      Postal: ARRIS Broadband
                      3871 Lakefield Drive
                      Suite 300
                      Suwanee, GA 30024-1242
                      U.S.A.
                      Phone:  +1 770-622-8400
                      E-mail: robert.coley@arrisi.com"
     DESCRIPTION
       "This MIB module supplies the basic proprietary (ARRIS-specific)
        management objects for ARRIS Cable Modem (CM) devices."
    
       
-- Revision history
    REVISION    "0211080000Z" -- November 08, 2002
    DESCRIPTION
        "Added object 'arrisCmDevEnableDocsis20'."

    REVISION    "0210290000Z" -- October 29, 2002
    DESCRIPTION
        "Added object 'arrisCmDevProvMethodIndicator'."
        
    REVISION    "0210230000Z" -- October 23, 2002
    DESCRIPTION
        "Added objects 'arrisCmDevSwImageName' and 'arrisCmDevSwImageBuildTime'."
        
    REVISION    "0207100000Z" --  July 10, 2002
    DESCRIPTION
        "Initial version"
    ::= { arrisProdIdCM 1 }


-- Textual Conventions
ArrsCmDevProvMethod ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION "These are the various provisioning methods that are 
                 supported by the device."
    SYNTAX INTEGER {
        docsisOnly(0),
        fullPacketCable(1),
        packetCableMinusKDC(2),
        cps(3),
        gupi(4),
        singleMAC(5)
    } 


arrisCmDevMibObjects OBJECT IDENTIFIER ::= { arrisCmDevMib 1 }
arrisCmDevBase       OBJECT IDENTIFIER ::= {arrisCmDevMibObjects 1 }

-- This MIB module contains the following groups.
arrisCmDevCmSetup              OBJECT IDENTIFIER ::= { arrisCmDevMibObjects 2}
arrisCmDevCmTest               OBJECT IDENTIFIER ::= { arrisCmDevMibObjects 3}

-- Production groups
arrisCmDevPermanentSetup       OBJECT IDENTIFIER ::= { arrisCmDevCmSetup 2}
arrisCmDevOperationalSetup     OBJECT IDENTIFIER ::= { arrisCmDevCmSetup 3}
arrisCmDevSalesSetup           OBJECT IDENTIFIER ::= { arrisCmDevCmSetup 4}

arrisCmDevManufacturingTest    OBJECT IDENTIFIER ::= { arrisCmDevCmTest 2}
arrisCmDevOperationalTest      OBJECT IDENTIFIER ::= { arrisCmDevCmTest 3}


arrisCmDevWanIsolationState OBJECT-TYPE
     SYNTAX INTEGER { 
         off-InActiveMode(1), 
         on-ActiveMode(2) 
     }
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION 
         "The object controls the state of WAN Isolation.  The meaning of 
          the state is as follows:
          
          off-InActiveMode(1) - Data traffic passes freely between 
             the home user<65>s network and the outside network (i.e. the Internet).  
             In this mode, the WAN Isolation state is considered 'InActive'.

          on-ActiveMode(2) - The home user<65>s network is isolated from the Internet.  
             Data traffic will not pass between the home user's network and the Internet.  
             In this mode, the WAN Isolation state is considered 'Active'."                           
     ::= { arrisCmDevBase 1 } 

arrisCmDevSwImageName OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS read-only 
     STATUS     current
     DESCRIPTION
         "The name of the software image currently operating on this device."
     ::= { arrisCmDevBase 2 }    
        
arrisCmDevSwImageBuildTime OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS read-only 
     STATUS     current
     DESCRIPTION
         "The build date and time of the software image currently operating on 
          this device."
     ::= { arrisCmDevBase 3 }


-- arrisCmDevOperationalSetup Group objects --

-- [ARRIS NOTE: For the published (publicly available) MIB, the MAX-ACCESS clause should 
--              have a value of 'read-only' for the 'arrisCmDevProvMethodIndicator' object.]
arrisCmDevProvMethodIndicator OBJECT-TYPE
     SYNTAX ArrsCmDevProvMethod
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION 
         "Indicates the method used to provision the device.  This object should only be 
          changed by the configuration file.  The following provisioning methods are supported:
          
             docsisOnly(0)          - DOCSIS-only provisioning
                                    
             fullPacketCable(1)     - fully PacketCable compliant provisioning
             
             packetCableMinusKDC(2) - same as 'fullPacketCable', except with IPSEC and 
                                      SNMPv3 disabled                                
                                      
             cps(3)                 - compatible with CPS2000 (SNMPv2; IPSEC disabled)
             
             gupi(4)                - SNMPv2, with no SNMP Informs and IPSEC disabled
             
             singleMAC(5)           - single config file (SNMPv2, single IP address, 
                                      single MAC address, no SNMP Informs, IPSEC disabled)"
     ::= { arrisCmDevOperationalSetup 2 }

arrisCmDevEnableDocsis20 OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "This object is used to enable/disable DOCSIS 2.0 operation mode.  
           This object is stored into NVRAM and will be operational after 
           the next reboot of the device.
           Set to true(1) to enable DOCSIS 2.0 operation mode.
           Set to false(2) to disable DOCSIS 2.0 operation mode.  
           Setting this object to the same value that is already stored in NVRAM 
           will do nothing.  After the successful setting of this object, the device 
           will automatically reboot."
        ::= { arrisCmDevOperationalSetup 3 }

                                            
END