1178 lines
37 KiB
Plaintext
1178 lines
37 KiB
Plaintext
CISCOSB-BRIDGE-SECURITY DEFINITIONS ::= BEGIN
|
|
|
|
-- Version: 7.43
|
|
-- Date: 02-Apr-2006
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32, IpAddress, Counter32 FROM SNMPv2-SMI
|
|
InterfaceIndex, ifIndex FROM IF-MIB
|
|
RowStatus, TEXTUAL-CONVENTION, MacAddress,
|
|
DisplayString, TruthValue FROM SNMPv2-TC
|
|
VlanId FROM Q-BRIDGE-MIB
|
|
switch001 FROM CISCOSB-MIB;
|
|
|
|
rlBridgeSecurity MODULE-IDENTITY
|
|
LAST-UPDATED "200604020001Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The private MIB module definition for DHCP Snoop, ARP Inspection
|
|
and Ip source Guard features."
|
|
::= { switch001 112}
|
|
|
|
rlIpDhcpSnoop OBJECT IDENTIFIER ::= { rlBridgeSecurity 1}
|
|
|
|
rlIpSourceGuard OBJECT IDENTIFIER ::= { rlBridgeSecurity 2}
|
|
|
|
rlIpArpInspect OBJECT IDENTIFIER ::= { rlBridgeSecurity 3}
|
|
|
|
rlProtocolFiltering OBJECT IDENTIFIER ::= { rlBridgeSecurity 4}
|
|
|
|
rlIpDhcpOpt82 OBJECT IDENTIFIER ::= { rlBridgeSecurity 5}
|
|
|
|
|
|
--
|
|
-- DHCP Snoop
|
|
--
|
|
rlIpDhcpSnoopMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlIpDhcpSnoop 1 }
|
|
|
|
rlIpDhcpSnoopEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies a system DHCP Snoop enable state."
|
|
::= { rlIpDhcpSnoop 2 }
|
|
|
|
rlIpDhcpSnoopFileEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies a system DHCP Snoop file enable state."
|
|
::= { rlIpDhcpSnoop 3 }
|
|
|
|
rlIpDhcpSnoopClearAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1), -- for get only
|
|
clearNow(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to clear DHCP Snoop Table."
|
|
::= { rlIpDhcpSnoop 4 }
|
|
|
|
rlIpDhcpSnoopFileUpdateTime OBJECT-TYPE
|
|
SYNTAX INTEGER(600..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures in seconds the period of time between file updates.
|
|
The valid range is 600 - 86400."
|
|
::= { rlIpDhcpSnoop 5 }
|
|
|
|
rlIpDhcpSnoopVerifyMacAddress OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures on an un-trusted port whether the source MAC address in a DHCP packet matches
|
|
the client hardware address."
|
|
::= { rlIpDhcpSnoop 6 }
|
|
|
|
rlIpDhcpSnoopCurrentEntiresNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contain the current number of DHCP snooping entries for all types."
|
|
::= { rlIpDhcpSnoop 7 }
|
|
|
|
rlIpDhcpOpt82InsertionEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies a DHCP option 82 insertion enable state."
|
|
::= { rlIpDhcpSnoop 8 }
|
|
|
|
rlIpDhcpOpt82RxOnUntrustedEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies a DHCP option 82 receive on untrusted port enable state."
|
|
::= { rlIpDhcpSnoop 9 }
|
|
|
|
--
|
|
-- Dhcp Snoop Static table
|
|
--
|
|
rlIpDhcpSnoopStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpSnoopStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table specifies all DHCP Snoop Static (configured by user) entries.
|
|
The entry contains a local IP address of the DHCP client, a Port interface to which a DHCP client is connected to the switch."
|
|
::= { rlIpDhcpSnoop 10 }
|
|
|
|
rlIpDhcpSnoopStaticEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpSnoopStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {rlIpDhcpSnoopStaticVLANTag,
|
|
rlIpDhcpSnoopStaticMACAddress}
|
|
::= { rlIpDhcpSnoopStaticTable 1 }
|
|
|
|
RlIpDhcpSnoopStaticEntry ::= SEQUENCE {
|
|
rlIpDhcpSnoopStaticVLANTag VlanId,
|
|
rlIpDhcpSnoopStaticMACAddress MacAddress,
|
|
rlIpDhcpSnoopStaticIPAddress IpAddress,
|
|
rlIpDhcpSnoopStaticPortInterface InterfaceIndex,
|
|
rlIpDhcpSnoopStaticRowStatus RowStatus
|
|
}
|
|
rlIpDhcpSnoopStaticVLANTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop Static entry vlan tag."
|
|
::= { rlIpDhcpSnoopStaticEntry 1 }
|
|
|
|
rlIpDhcpSnoopStaticMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop Static entry mac address"
|
|
::= { rlIpDhcpSnoopStaticEntry 2 }
|
|
|
|
rlIpDhcpSnoopStaticIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop Static entry IP address."
|
|
::= { rlIpDhcpSnoopStaticEntry 3 }
|
|
|
|
rlIpDhcpSnoopStaticPortInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop Static entry Port interface."
|
|
::= { rlIpDhcpSnoopStaticEntry 4 }
|
|
|
|
rlIpDhcpSnoopStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A status can be destroy, active or createAndGo"
|
|
::= { rlIpDhcpSnoopStaticEntry 5 }
|
|
|
|
--
|
|
-- Dhcp Snoop table
|
|
--
|
|
|
|
RlIpDhcpSnoopType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Ip Dhcp Snoop entry type."
|
|
SYNTAX INTEGER {
|
|
learnedByProtocol(1),
|
|
deletedByTimeout(2),
|
|
static(3)
|
|
}
|
|
|
|
rlIpDhcpSnoopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpSnoopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP Snoop entry. Use to add/delete a dynamic entries and to view all entries (dynamic and static)"
|
|
::= { rlIpDhcpSnoop 11 }
|
|
|
|
rlIpDhcpSnoopEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpSnoopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {rlIpDhcpSnoopVLANTag,
|
|
rlIpDhcpSnoopMACAddress}
|
|
::= { rlIpDhcpSnoopTable 1 }
|
|
|
|
RlIpDhcpSnoopEntry ::= SEQUENCE {
|
|
rlIpDhcpSnoopVLANTag VlanId,
|
|
rlIpDhcpSnoopMACAddress MacAddress,
|
|
rlIpDhcpSnoopType RlIpDhcpSnoopType,
|
|
rlIpDhcpSnoopLeaseTime Unsigned32,
|
|
rlIpDhcpSnoopIPAddress IpAddress,
|
|
rlIpDhcpSnoopPortInterface InterfaceIndex,
|
|
rlIpDhcpSnoopRowStatus RowStatus
|
|
}
|
|
rlIpDhcpSnoopVLANTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop entry vlan tag."
|
|
::= { rlIpDhcpSnoopEntry 1 }
|
|
|
|
rlIpDhcpSnoopMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop entry mac address"
|
|
::= { rlIpDhcpSnoopEntry 2 }
|
|
|
|
rlIpDhcpSnoopType OBJECT-TYPE
|
|
SYNTAX RlIpDhcpSnoopType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop entry type: static or dynamic."
|
|
::= { rlIpDhcpSnoopEntry 3 }
|
|
|
|
rlIpDhcpSnoopLeaseTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop lease time. For static entry the lease time is 0xFFFFFFFF"
|
|
::= { rlIpDhcpSnoopEntry 4 }
|
|
|
|
rlIpDhcpSnoopIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP client referred to in this table entry."
|
|
::= { rlIpDhcpSnoopEntry 5 }
|
|
|
|
rlIpDhcpSnoopPortInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the port Interface ifindex, which connected to DHCP client identified with the entry."
|
|
::= { rlIpDhcpSnoopEntry 6 }
|
|
|
|
rlIpDhcpSnoopRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status. A valid status is CreateandGo or Delete."
|
|
::= { rlIpDhcpSnoopEntry 7 }
|
|
|
|
--
|
|
-- Dhcp Snoop Enable VLAN Table
|
|
--
|
|
rlIpDhcpSnoopEnableVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpSnoopEnableVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Ip Dhcp Snooping enabled VLAN table."
|
|
::= { rlIpDhcpSnoop 12 }
|
|
|
|
rlIpDhcpSnoopEnableVlanEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpSnoopEnableVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Ip Dhcp Snooping enabled VLAN entry."
|
|
INDEX {rlIpDhcpSnoopEnableVlanTag}
|
|
::= { rlIpDhcpSnoopEnableVlanTable 1 }
|
|
|
|
RlIpDhcpSnoopEnableVlanEntry ::= SEQUENCE {
|
|
rlIpDhcpSnoopEnableVlanTag VlanId,
|
|
rlIpDhcpSnoopEnableVlanRowStatus RowStatus
|
|
}
|
|
rlIpDhcpSnoopEnableVlanTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A DHCP Snoop entry vlan tag."
|
|
::= { rlIpDhcpSnoopEnableVlanEntry 1 }
|
|
|
|
rlIpDhcpSnoopEnableVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status. A valid status is CreateandGo and Delete."
|
|
::= { rlIpDhcpSnoopEnableVlanEntry 2 }
|
|
|
|
--
|
|
-- Dhcp Snoop Trusted ports Table
|
|
--
|
|
rlIpDhcpSnoopTrustedPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpSnoopTrustedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Snoop Trusted ports entry. The entry created when port is configured as trusted."
|
|
::= { rlIpDhcpSnoop 13 }
|
|
|
|
rlIpDhcpSnoopTrustedPortEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpSnoopTrustedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {ifIndex}
|
|
::= { rlIpDhcpSnoopTrustedPortTable 1 }
|
|
|
|
RlIpDhcpSnoopTrustedPortEntry ::= SEQUENCE {
|
|
rlIpDhcpSnoopTrustedPortRowStatus RowStatus
|
|
}
|
|
|
|
rlIpDhcpSnoopTrustedPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status. A valid status is CreateandGo or Delete."
|
|
::= { rlIpDhcpSnoopTrustedPortEntry 2 }
|
|
|
|
--
|
|
-- IP Source Guard
|
|
--
|
|
|
|
rlIpSourceGuardMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlIpSourceGuard 1 }
|
|
|
|
rlIpSourceGuardEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FALSE - There is no Ip Source Guard in the system.
|
|
TRUE - Ip Source Guard is enabled on system."
|
|
::= { rlIpSourceGuard 2 }
|
|
|
|
rlIpSourceGuardRetryToInsert OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(0), -- for get only
|
|
retryToInsertNow(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When setted to retryToInsertNow all IP Source Guard inactive entries
|
|
due to resource problem reinserted in the Policy.
|
|
On get always return noAction."
|
|
::= { rlIpSourceGuard 3 }
|
|
|
|
rlIpSourceGuardRetryTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures in seconds the period of time the application retries to
|
|
insert inactive by resource problem rules. The actual range is 10-600.
|
|
0 used to sign that the timer is not active."
|
|
::= { rlIpSourceGuard 4 }
|
|
|
|
--
|
|
-- IP Source Guard Ports table
|
|
--
|
|
|
|
rlIpSourceGuardPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpSourceGuardPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Source Guard ports entry. The entry created when IP Source Guard
|
|
enabled on port."
|
|
::= { rlIpSourceGuard 5 }
|
|
|
|
rlIpSourceGuardPortEntry OBJECT-TYPE
|
|
SYNTAX RlIpSourceGuardPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {ifIndex}
|
|
::= { rlIpSourceGuardPortTable 1 }
|
|
|
|
RlIpSourceGuardPortEntry ::= SEQUENCE {
|
|
rlIpSourceGuardPortRowStatus RowStatus
|
|
}
|
|
rlIpSourceGuardPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status. A valid status is CreateAndGo or Delete."
|
|
::= { rlIpSourceGuardPortEntry 2 }
|
|
|
|
--
|
|
-- IP Source Guard table
|
|
--
|
|
|
|
RlIpSourceGuardType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Ip IP Source Guard entry type."
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
RlIpSourceGuardStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Ip IP Source Guard entry status."
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
RlIpSourceGuardFailReason ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Ip IP Source Guard entry reason."
|
|
SYNTAX INTEGER {
|
|
noProblem(1),
|
|
noResource(2),
|
|
noSnoopVlan(3),
|
|
trustPort(4)
|
|
}
|
|
|
|
rlIpSourceGuardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpSourceGuardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP Source Guard entry. Use to view all entries (dynamic and static)"
|
|
::= { rlIpSourceGuard 6 }
|
|
|
|
rlIpSourceGuardEntry OBJECT-TYPE
|
|
SYNTAX RlIpSourceGuardEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {ifIndex,
|
|
rlIpSourceGuardIPAddress,
|
|
rlIpSourceGuardVLANTag}
|
|
::= { rlIpSourceGuardTable 1 }
|
|
|
|
RlIpSourceGuardEntry ::= SEQUENCE {
|
|
rlIpSourceGuardIPAddress IpAddress,
|
|
rlIpSourceGuardVLANTag VlanId,
|
|
rlIpSourceGuardMACAddress MacAddress,
|
|
rlIpSourceGuardType RlIpSourceGuardType,
|
|
rlIpSourceGuardStatus RlIpSourceGuardStatus,
|
|
rlIpSourceGuardFailReason RlIpSourceGuardFailReason
|
|
}
|
|
|
|
rlIpSourceGuardIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the Ip Source Guard entry."
|
|
::= { rlIpSourceGuardEntry 1 }
|
|
|
|
rlIpSourceGuardVLANTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Ip Source Guard entry vlan tag."
|
|
::= { rlIpSourceGuardEntry 2 }
|
|
|
|
rlIpSourceGuardMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Ip Source Guard entry mac address"
|
|
::= { rlIpSourceGuardEntry 3 }
|
|
|
|
rlIpSourceGuardType OBJECT-TYPE
|
|
SYNTAX RlIpSourceGuardType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Ip Source Guard entry type: static or dynamic."
|
|
::= { rlIpSourceGuardEntry 4 }
|
|
|
|
rlIpSourceGuardStatus OBJECT-TYPE
|
|
SYNTAX RlIpSourceGuardStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the status of Ip Source Guard entry."
|
|
::= { rlIpSourceGuardEntry 5 }
|
|
|
|
rlIpSourceGuardFailReason OBJECT-TYPE
|
|
SYNTAX RlIpSourceGuardFailReason
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the reason for in-activity of Ip Source Guard entry."
|
|
::= { rlIpSourceGuardEntry 6 }
|
|
|
|
--
|
|
-- IP Source Guard Permitted rules counter table
|
|
--
|
|
|
|
rlIpSourceGuardPermittedRuleCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpSourceGuardPermittedRuleCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table includes, per vlan, the IP Source Guard permitted rules counters."
|
|
::= { rlIpSourceGuard 7 }
|
|
|
|
rlIpSourceGuardPermittedRuleCounterEntry OBJECT-TYPE
|
|
SYNTAX RlIpSourceGuardPermittedRuleCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {rlIpSourceGuardPermittedRuleCounterVLANTag}
|
|
::= { rlIpSourceGuardPermittedRuleCounterTable 1 }
|
|
|
|
RlIpSourceGuardPermittedRuleCounterEntry ::= SEQUENCE {
|
|
rlIpSourceGuardPermittedRuleCounterVLANTag VlanId,
|
|
rlIpSourceGuardPermittedRuleCounterNumOfStaticRules Counter32,
|
|
rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules Counter32
|
|
}
|
|
rlIpSourceGuardPermittedRuleCounterVLANTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip Source Guard permitted rules counters entry Vlan tag."
|
|
::= { rlIpSourceGuardPermittedRuleCounterEntry 1 }
|
|
|
|
rlIpSourceGuardPermittedRuleCounterNumOfStaticRules OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of static rules added by IP Source Guard for the permitted Hosts"
|
|
::= { rlIpSourceGuardPermittedRuleCounterEntry 2 }
|
|
|
|
rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of rules added by IP Source Guard for the permitted Hosts,
|
|
as a result of DHCP Snooping dynamic information."
|
|
::= { rlIpSourceGuardPermittedRuleCounterEntry 3 }
|
|
|
|
--
|
|
-- ARP Inspection
|
|
--
|
|
RlIpArpInspectListNameType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "Ip arp inspection list name type."
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
|
|
rlIpArpInspectMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlIpArpInspect 1 }
|
|
|
|
rlIpArpInspectEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies a system ARP Inspection enable state."
|
|
::= { rlIpArpInspect 2 }
|
|
|
|
rlIpArpInspectLogInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the minimal interval between successive ARP SYSLOG messages.
|
|
0 - message is immediately generated.
|
|
0xFFFFFFFF - messages would not be generated. A legal range is 0-86400."
|
|
::= { rlIpArpInspect 3 }
|
|
|
|
rlIpArpInspectValidation OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defined a specific check on incoming ARP packets:
|
|
Source MAC: Compare the source MAC address in the Ethernet header against
|
|
the sender MAC address in the ARP body. This check is performed on both ARP requests and responses.
|
|
Destination MAC: Compare the destination MAC address in the Ethernet header against
|
|
the target MAC address in ARP body. This check is performed for ARP responses.
|
|
IP addresses: Compare the ARP body for invalid and unexpected IP addresses.
|
|
Addresses include 0.0.0.0, 255.255.255.255, and all IP multicast addresses."
|
|
::= { rlIpArpInspect 4 }
|
|
|
|
--
|
|
-- ARP Inspection List table
|
|
--
|
|
rlIpArpInspectListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpArpInspectListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table specifies all ARP Inspection List entries.
|
|
The entry contains a list name, list IP address, a list Mac address."
|
|
::= { rlIpArpInspect 5 }
|
|
|
|
rlIpArpInspectListEntry OBJECT-TYPE
|
|
SYNTAX RlIpArpInspectListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {rlIpArpInspectListName,
|
|
rlIpArpInspectListIPAddress}
|
|
::= { rlIpArpInspectListTable 1 }
|
|
|
|
RlIpArpInspectListEntry ::= SEQUENCE {
|
|
rlIpArpInspectListName RlIpArpInspectListNameType,
|
|
rlIpArpInspectListIPAddress IpAddress,
|
|
rlIpArpInspectListMACAddress MacAddress,
|
|
rlIpArpInspectListRowStatus RowStatus
|
|
}
|
|
|
|
rlIpArpInspectListName OBJECT-TYPE
|
|
SYNTAX RlIpArpInspectListNameType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Name of the Access List."
|
|
::= { rlIpArpInspectListEntry 1}
|
|
|
|
rlIpArpInspectListIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Inspection List IP address."
|
|
::= { rlIpArpInspectListEntry 2 }
|
|
|
|
rlIpArpInspectListMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP Inspection List mac address"
|
|
::= { rlIpArpInspectListEntry 3 }
|
|
|
|
rlIpArpInspectListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A status can be destroy, active or createAndGo"
|
|
::= { rlIpArpInspectListEntry 4 }
|
|
|
|
--
|
|
-- Arp Inspection Enable VLAN Table
|
|
--
|
|
rlIpArpInspectEnableVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpArpInspectEnableVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Ip ARP Inspection enabled VLAN table."
|
|
::= { rlIpArpInspect 6 }
|
|
|
|
rlIpArpInspectEnableVlanEntry OBJECT-TYPE
|
|
SYNTAX RlIpArpInspectEnableVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An Ip ARP Inspection enabled VLAN entry."
|
|
INDEX {rlIpArpInspectEnableVlanTag}
|
|
::= { rlIpArpInspectEnableVlanTable 1 }
|
|
|
|
RlIpArpInspectEnableVlanEntry ::= SEQUENCE {
|
|
rlIpArpInspectEnableVlanTag VlanId,
|
|
rlIpArpInspectAssignedListName RlIpArpInspectListNameType,
|
|
rlIpArpInspectEnableVlanRowStatus RowStatus,
|
|
rlIpArpInspectVlanNumOfArpForwarded Counter32,
|
|
rlIpArpInspectVlanNumOfArpDropped Counter32,
|
|
rlIpArpInspectVlanNumOfArpMismatched Counter32,
|
|
rlIpArpInspectVlanClearCountersAction TruthValue
|
|
}
|
|
|
|
rlIpArpInspectEnableVlanTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Ip ARP Inspection entry vlan tag."
|
|
::= { rlIpArpInspectEnableVlanEntry 1 }
|
|
|
|
rlIpArpInspectAssignedListName OBJECT-TYPE
|
|
SYNTAX RlIpArpInspectListNameType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Ip ARP Inspection assigned ACL name."
|
|
::= { rlIpArpInspectEnableVlanEntry 2 }
|
|
|
|
rlIpArpInspectEnableVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status. A valid status is CreateandGo and Delete."
|
|
::= { rlIpArpInspectEnableVlanEntry 3 }
|
|
|
|
rlIpArpInspectVlanNumOfArpForwarded OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of forwarded ARP packets, packets which were validated by ARP inspection "
|
|
::= { rlIpArpInspectEnableVlanEntry 4 }
|
|
|
|
rlIpArpInspectVlanNumOfArpDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of dropped ARP packets, which were validated by ARP inspection
|
|
(mismatch , not-found and dropped for any reason)"
|
|
::= { rlIpArpInspectEnableVlanEntry 5 }
|
|
|
|
rlIpArpInspectVlanNumOfArpMismatched OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of dropped ARP packets, which were validated by ARP inspection
|
|
and inconsistency was found for IP and MAC (mismatch)"
|
|
::= { rlIpArpInspectEnableVlanEntry 6 }
|
|
|
|
rlIpArpInspectVlanClearCountersAction OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, clear (set to zero) all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded ,
|
|
rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfArpMismatched"
|
|
DEFVAL{ false }
|
|
::= { rlIpArpInspectEnableVlanEntry 7 }
|
|
|
|
|
|
--
|
|
-- ARP Inspection Trusted ports Table
|
|
--
|
|
rlIpArpInspectTrustedPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpArpInspectTrustedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ARP Inspection Trusted ports entry. The entry created when port is configured as trusted."
|
|
::= { rlIpArpInspect 7 }
|
|
|
|
rlIpArpInspectTrustedPortEntry OBJECT-TYPE
|
|
SYNTAX RlIpArpInspectTrustedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {ifIndex}
|
|
::= { rlIpArpInspectTrustedPortTable 1 }
|
|
|
|
RlIpArpInspectTrustedPortEntry ::= SEQUENCE {
|
|
rlIpArpInspectTrustedPortRowStatus RowStatus
|
|
}
|
|
rlIpArpInspectTrustedPortRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status. A valid status is CreateandGo or Delete."
|
|
::= { rlIpArpInspectTrustedPortEntry 2 }
|
|
|
|
|
|
rlIpArpInspectClearCountersAction OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, clear (set to zero) on all vlans: all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded ,
|
|
rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfArpMismatched"
|
|
DEFVAL{ false }
|
|
::= { rlIpArpInspect 8 }
|
|
|
|
--
|
|
-- Protocol Filtering
|
|
--
|
|
ProtocolFilteringMap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the list of protocol to be filtered.
|
|
The bit 'all(0)' indicates all Cisco protocols in range 0100.0ccc.ccc0 - 0100.0ccc.cccf
|
|
The bit 'cdp(1)' indicates Cisco CDP protocol.
|
|
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x2000.
|
|
|
|
The bit 'vtp(2)' indicates Cisco VTP protocol.
|
|
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x2003.
|
|
|
|
The bit 'dtp(3)' indicates Cisco DTP protocol.
|
|
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x2004.
|
|
|
|
The bit 'udld (4)' indicates Cisco UDLD protocol.
|
|
Identified by destination mac address: 0100.0ccc.cccc and protocol type:0x0111.
|
|
|
|
The bit 'pagp(5)' indicates Cisco PAGP protocol.
|
|
Identified by destination mac address: 0100.0ccc.cccc and protocol type: 0x0104.
|
|
|
|
The bit 'sstp(6)' indicates Cisco SSTP protocol.
|
|
Identified by destination mac address: 0100.0ccc.cccd.
|
|
|
|
"
|
|
SYNTAX BITS {
|
|
all(0),
|
|
cdp(1),
|
|
vtp(2),
|
|
dtp(3),
|
|
udld(4),
|
|
pagp(5),
|
|
sstp(6)
|
|
}
|
|
|
|
rlProtocolFilteringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlProtocolFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Protocol filter configuration entry"
|
|
::= { rlProtocolFiltering 1 }
|
|
|
|
rlProtocolFilteringEntry OBJECT-TYPE
|
|
SYNTAX RlProtocolFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {ifIndex}
|
|
::= { rlProtocolFilteringTable 1 }
|
|
|
|
RlProtocolFilteringEntry::= SEQUENCE {
|
|
rlProtocolFilteringList ProtocolFilteringMap,
|
|
rlProtocolFilteringRowStatus RowStatus
|
|
}
|
|
|
|
rlProtocolFilteringList OBJECT-TYPE
|
|
SYNTAX ProtocolFilteringMap
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of protocol to be filtered."
|
|
::= { rlProtocolFilteringEntry 1 }
|
|
rlProtocolFilteringRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A status can be destroy, active or createAndGo"
|
|
::= { rlProtocolFilteringEntry 2 }
|
|
|
|
|
|
--
|
|
-- DHCP Option82
|
|
--
|
|
rlIpDhcpOpt82ConfigEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Specifies a DHCP option 82 configurable state."
|
|
::= { rlIpDhcpOpt82 1 }
|
|
|
|
|
|
rlIpDhcpOpt82SuboptionConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpOpt82SuboptionConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Protocol filter configuration entry"
|
|
::= { rlIpDhcpOpt82 2 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpOpt82SuboptionConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX {rlIpDhcpOpt82SuboptionConfigIndex}
|
|
::= { rlIpDhcpOpt82SuboptionConfigTable 1 }
|
|
|
|
RlIpDhcpOpt82SuboptionConfigEntry::= SEQUENCE {
|
|
rlIpDhcpOpt82SuboptionConfigIndex INTEGER,
|
|
rlIpDhcpOpt82SuboptionConfigCircuitIdPayloadLength INTEGER,
|
|
rlIpDhcpOpt82SuboptionConfigCircuitIdFormat DisplayString,
|
|
rlIpDhcpOpt82SuboptionConfigRemoteIdPayloadLength INTEGER,
|
|
rlIpDhcpOpt82SuboptionConfigRemoteIdFormat DisplayString,
|
|
rlIpDhcpOpt82SuboptionConfigNumericTokenFormat INTEGER,
|
|
rlIpDhcpOpt82SuboptionConfigCircuitIdAuxFailFlag TruthValue
|
|
}
|
|
|
|
rlIpDhcpOpt82SuboptionConfigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry index. Must be 1"
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 1 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigCircuitIdPayloadLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns CircuitId payload length."
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 2 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigCircuitIdFormat OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..160))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the CircuitId format. Default is an empty string. Empty string means that CircuitId is added in a default format.
|
|
Non-empty string AND true value of rlIpDhcpOpt82SuboptionConfigCircuitIdSupported Scalar means that CircuitId is added in configured format"
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 3 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigRemoteIdPayloadLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns RemoteId payload length."
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 4 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigRemoteIdFormat OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..160))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the RemoteId format. Default is an empty string. Empty string means that RemoteId is added in a default format.
|
|
Non-empty string AND true value of rlIpDhcpOpt82SuboptionConfigRemoteIdSupported Scalar means that RemoteId is added in configured format"
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 5 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigNumericTokenFormat OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
hex(1),
|
|
ascii(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the format of numeric tokens included in the Circuit-id and Remote-ID sub-options string."
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 6 }
|
|
|
|
rlIpDhcpOpt82SuboptionConfigCircuitIdAuxFailFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines whatever to fail the CircuitId Suboption configuration"
|
|
::= { rlIpDhcpOpt82SuboptionConfigEntry 7 }
|
|
|
|
|
|
--------------------------------------------------------------
|
|
-- rlIpDhcpOpt82SuboptionContentTable (Read Only)
|
|
--------------------------------------------------------------
|
|
|
|
rlIpDhcpOpt82SuboptionContentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpOpt82SuboptionContentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table specifies option 82 content."
|
|
::= { rlIpDhcpOpt82 3 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpOpt82SuboptionContentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX { rlIpDhcpOpt82SuboptionContentIfIndex,
|
|
rlIpDhcpOpt82SuboptionContentVlanTag }
|
|
::= { rlIpDhcpOpt82SuboptionContentTable 1 }
|
|
|
|
RlIpDhcpOpt82SuboptionContentEntry ::= SEQUENCE {
|
|
rlIpDhcpOpt82SuboptionContentIfIndex InterfaceIndex,
|
|
rlIpDhcpOpt82SuboptionContentVlanTag VlanId,
|
|
rlIpDhcpOpt82SuboptionContentCircuitIdHeader OCTET STRING,
|
|
rlIpDhcpOpt82SuboptionContentCircuitIdPayload160 OCTET STRING,
|
|
rlIpDhcpOpt82SuboptionContentCircuitIdPayload320 OCTET STRING,
|
|
rlIpDhcpOpt82SuboptionContentRemoteIdHeader OCTET STRING,
|
|
rlIpDhcpOpt82SuboptionContentRemoteIdPayload160 OCTET STRING,
|
|
rlIpDhcpOpt82SuboptionContentRemoteIdPayload320 OCTET STRING
|
|
}
|
|
|
|
rlIpDhcpOpt82SuboptionContentIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's interface index."
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 1 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentVlanTag OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN identifier."
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 2 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentCircuitIdHeader OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies option 82 CircuitId suboption header content per interface/port"
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 3 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentCircuitIdPayload160 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies option 82 CircuitId suboption payload first 160 bytes content per interface/port"
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 4 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentCircuitIdPayload320 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies option 82 CircuitId suboption payload second 160 bytes content per interface/port"
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 5 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentRemoteIdHeader OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies option 82 RemoteId suboption header content per interface/port"
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 6 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentRemoteIdPayload160 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies option 82 RemoteId suboption payload first 160 bytes content per interface/port"
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 7 }
|
|
|
|
rlIpDhcpOpt82SuboptionContentRemoteIdPayload320 OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies option 82 RemoteId suboption payload second 160 bytes content per interface/port"
|
|
::= { rlIpDhcpOpt82SuboptionContentEntry 8 }
|
|
|
|
|
|
--------------------------------------------------------------
|
|
-- rlIpDhcpOpt82SuboptionTokenTable (Read Only)
|
|
--------------------------------------------------------------
|
|
|
|
rlIpDhcpOpt82SuboptionTokenTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpDhcpOpt82SuboptionTokenEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table specifies option 82 content."
|
|
::= { rlIpDhcpOpt82 4 }
|
|
|
|
rlIpDhcpOpt82SuboptionTokenEntry OBJECT-TYPE
|
|
SYNTAX RlIpDhcpOpt82SuboptionTokenEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The row definition for this table."
|
|
INDEX { rlIpDhcpOpt82SuboptionTokenName}
|
|
::= { rlIpDhcpOpt82SuboptionTokenTable 1 }
|
|
|
|
RlIpDhcpOpt82SuboptionTokenEntry ::= SEQUENCE {
|
|
rlIpDhcpOpt82SuboptionTokenName DisplayString,
|
|
rlIpDhcpOpt82SuboptionTokenValue DisplayString,
|
|
rlIpDhcpOpt82SuboptionTokenFormat INTEGER,
|
|
rlIpDhcpOpt82SuboptionTokenReservedLength INTEGER,
|
|
rlIpDhcpOpt82SuboptionTokenHexaLength INTEGER
|
|
}
|
|
|
|
rlIpDhcpOpt82SuboptionTokenName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Token have meaningful and pre-determined names based on the information they represent. A $ symbol is placed before and after the Token name ($token-name$)."
|
|
::= { rlIpDhcpOpt82SuboptionTokenEntry 1 }
|
|
|
|
rlIpDhcpOpt82SuboptionTokenValue OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Token description."
|
|
::= { rlIpDhcpOpt82SuboptionTokenEntry 2 }
|
|
|
|
rlIpDhcpOpt82SuboptionTokenFormat OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
hex(1),
|
|
ascii(2),
|
|
config(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Token format."
|
|
::= { rlIpDhcpOpt82SuboptionTokenEntry 3 }
|
|
|
|
rlIpDhcpOpt82SuboptionTokenReservedLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Token reserved length."
|
|
::= { rlIpDhcpOpt82SuboptionTokenEntry 4 }
|
|
|
|
rlIpDhcpOpt82SuboptionTokenHexaLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If format is config, the hexa length is returned. Otherwise 0."
|
|
::= { rlIpDhcpOpt82SuboptionTokenEntry 5 }
|
|
|
|
END
|
|
|